Date post: | 17-Jan-2015 |
Category: |
Technology |
Upload: | cleanskyju |
View: | 1,960 times |
Download: | 2 times |
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
Jean-Pierre THERETEcoDesign leader in Europe
+33 6 6023 4767
Integrating
EcoDesign & LCA
with
CAD & PLM
Le BourgetClean Sky chalet2011, June 20th
Dassault Systèmes
Sustainable Innovation
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
Dassault Systèmes Brands
Virtual Product
3D MCAD
Virtual Testing
Virtual Production
PLM Collaboration
User Experience
Search Base Application
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
Too much
Green
House
Gazes
(GHG)
Too
much
wastes
Environmental Issues
SOLUTIONS ?
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
Studies / Design &
Simulation
Certify
Use & End of
Life
Experience
Manufacturing & production
EcoDesign strategy…
Share a project
with Eco-System
Design an Eco-
product while
optimizing
Costs
Decrease
the use of
resources,
energy and
costs
Check the
product’s
compliance
Anticipate the product’s end
of Life
Influence Design Choice
CO2
Reach
Energy
CostsClean
Manufacturing
Integrate to design process Support the full PLM Based on open platforms
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
DS EcoDesign Offers
Investigation in 4 directions Reduction in the material
intensity
Reduction of energy intensity
Reduction of toxic materials
Promote reusability
Improved recyclability
Use of renewable resources
Greater durability
Increase service intensity
EcoDesign
3. Product Eco-Profile
4. Site Footprint
2. Recycling
1. MaterialCompliance
Materials Compliance
Sustainability
EU ELV/RRR(ISO22628)
Environmental
Data
Workbench
2011-01-20
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
ENOVIA Material Compliance Central (MCC)
Impact analysis of the Product BOM against the Material Regulations
REACH, RoHS, ELV, Packaging… or any industry or OEM substances lists
Refining the eBOM with the Materials & Substances weights = CBOM
Supplier portal to manage Supplier Material Declaration requests
Standard data exchange formats supported: IMDS, IPC1752… BOMCheck (2012)
2011-01-20
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
SolidWorks Sustainability (SWS)
2011-01-20
Inputs:- Material & weight
- Manufacturing process & location
- Usage location
- Standard end-of-life scenario
Results:- GWP - Global Warming Potential
- Energy - Total Energy consumed
- Air pollution - Acidification
- Water pollution - Eutrophication
Scenarios:- Simplified LCA dashboard for one product
- Comparison of a baseline with a design alternative
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
ENOVIA Environmental Data Workbench The EcoDesign solution for OEM….
8
PLM Product Lifecycle Management Extract/transform material design (CAD) & simulate manufacture use recycle
Materials Compliance Cost AnalysisLife Cycle Assessment Carbon Footprint
EDW Repository
CollectValidate
Publish & Report
Transportation
Infrastructure / Resources
Energy / Resources
Supply Chain
Internal
Public Sources
Recycling
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
ENOVIA EDW for Aerospace…
VPM v4v6
V5V6 V6
MyQuickFDS
PLM Product Life Cycle Management Extract/transform material design & simulate manufacture use recycle
Materials Compliance Cost AnalysisLife Cycle Assessment Carbon Footprint
RepositoryPublish
ValidateCollect
Transportation
Infrastructure / Resources
Energy / Resources
Supply Chain
Internal
Public Sources
EDW Repository
2011-01-20
SwYm
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
ENOVIA EDW: Use Cases
1) Ease collecting data for an LCA study
• Out of the box synchronizations of ENOVIAv6 with CATIA & DELMIA
• Store & capitalize the process eco-profiles with LCA Product Systems
2) Quickly perform a simplified LCA study
• The available processes eco-profiles may be re-used to perform
quickly a new product LCA study.
3) Consolidate Site & Product data
• If Product data is not available, allocate the site impacts to all the
Products using the Site resources
• If Site and Products data are available, compare them for
validation
2011-01-20
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
ENOVIA EDW : EcoDesign Business Scenarios
Compliancy Regulations
Need: check the Product Compliancy to the Materials (restricted substances usages), Recycling or End of Life EU regulations
Targets : EU REACH, RoHS, ELV/RRR, WEEE…
Product Environmental Profile Declaration (EPD)
Need : communicate the environmental performance of the Product to Customers (B2B) or to End-Users (B2C)LCA targeted tools: GaBi, SimaPro, EIME (E&E), OpenLCA…
Product EcoDesign
Need: design a better « eco-friendly » product, reduce environmental impacts all along the lifecycle & energy costs, ease recycling at the end of life
Approach: integrate ecological indicators & innovation in the Design Process
2011-01-20
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
EcoDesign with the Supply Chain…
2011-01-20
Supplier
OEM
Supplier
Supplier
No tool !
Bilan Produit
by ADEME
Solidworks
Sustainability
Online
Suplier Portal
Data
exchange
standard
Supplier
ECOMUBA project: EcoDesing for the
Aeronautics Supply Chain
Supplier
ATEP
/CETIM
EIME
Copyright Dassault Systèmes – 2009 – All rights reserved – Internal use only
Dassault Systèmes – EcoDesign Offer
+33 (0)6 60 23 47 67Dassault Systèmes, EcoDesign leader
+33 (0)6 1143 2254
Dassault Systèmes, Aerospace & Innovation
2011-01-20