3Electronic PipettorA pre-programmed instrument for diluting and pipetting on to 3M™ Petrifilm™ Plates.

The 3M™ Electronic Pipettor combines efficiency,versatility, and precision into one simple, yet sophisti-cated tool. The Electronic Pipettor is pre-programmed to perform the most common Petrifilm plate dilutions and provides high accuracy and precision handling for micro-volumes of liquids.

The self-calibrating, microprocessor-based systemreduces the possibility of human error and instrumentcontamination by controlling pipetting speed, calibration,and volume selection. Its lightweight and ergonomiccontrols take the effort out of pipetting to help reduce the risk of repetitive strain injuries that are frequent with manual pipetting.

1

Limited Warranty:The manufacturer warrants that the Electronic Pipettor meets its current specifications for 1 year after shipment, provided it is used and cared for in accordance with its instructions. If for any reason the product fails to meet any express warranties, as your sole remedy, 3M will repair or replace the unit or refund the purchase price. 3M DISCLAIMS ALLOTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOTLIMITED TO, ANY WARRANTIES OF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE. The customer must determine whether this product isappropriate for use with its products and processes.

Limitation of Remedies:At 3M’s option, 3M will replace or refund the purchase price of any Petrifilm™ or Redigel™ productsthat do not meet 3M’s express limited warranty. In addition, 3M may elect to have repaired anyElectronic Pipettor that does not meet 3M’s express warranty. You must promptly notify 3M of anysuspected nonconformance in a product within 30 days after you discover it and return the product to3M. Please call Customer Service (800-328-1671 in the U.S.) or your official 3M MicrobiologyProducts representative for a Returned Goods Authorization. THESE ARE YOUREXCLUSIVE REMEDIES, UNLESS OTHERWISE PROHIBITED BY LAW,3M WILL NOT BE LIABLE FOR ANY OTHER DIRECT, INDIRECT,SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING,BUT NOT LIMITED TO, LOST PROFITS.Read Product Package Insert for Important Product Information

� Pre-programmed diluting andpipetting modes

� Self-calibrating, microprocessor-controlled system

� Full-grip, low-effort tip ejector

� Soft-touch operating buttons

� Open programming mode for user-set pipetting and diluting

� Recall button for selecting previous mode

� LCD screen for viewing speed, mode and volume

� Five speeds for aspirating and dispensing efficiently

� Cordless operation

� Magnetic-mount recharging stand

� Replaceable NiMH battery

� Weighs less than six ounces

� 3M Electronic Pipettor-1ml meetsAPHA “Standard Methods for theExamination of Dairy Products”pipette accuracy criteria.

The 3M Electronic Pipettor is available in 1ml or 5ml sizes and has:

Ordering InformationProduct Cat. No. Units/Case3M Electronic Pipettor — 1ml 6482 13M Electronic Pipettor — 5ml 6483 13M Pipettor Tips — 1ml, wide bore, racked, pre-sterilized 6486 960/case3M Pipettor Tips — 1ml, wide bore, racked 6485 960/case3M Pipettor Tips — 1ml, wide bore, bulk 6484 1000/case3M Pipettor Tips — 5ml, wide bore, racked, pre-sterilized 6489 500/case3M Pipettor Tips — 5ml, wide bore, racked 6488 500/case3M Pipettor Tips — 5ml, wide bore, bulk 6487 250/case

To order the 3M Electronic Pipettor and Petrifilm products, call 1-800-328-1671.

Enhance Productivity.

33M Canada

P.O. Box 5757London, Ontario N6A 4T1,Canada1-800-364-3577

Combine the cost-efficiency and

labor-saving technology of Petrifilm plates with

the features of the 3M Electronic Pipettor.

2

970 MS 05474 E