Date post: | 15-Apr-2017 |
Category: |
Documents |
Upload: | indiamart-intermesh-limited |
View: | 558 times |
Download: | 2 times |
An ISO 9001 : 2008 Company
COMPLETE FINISHING SOLUTION
Your search for perfect Finishingand painting solutions ends here.............
An ISO 9001 : 2008 Company
1
Slim S HVLP -WALCOM Italy
Recommended For : High Quality Finish And Better
Transfer Efficiency
Areas Of Application : Nozzle SizeFinal Finish Paints PU, Epoxy, Enamel : 1.3mm /1.5mm
Lacquer Applications : 1.0mm
Adhesive Applications : 1.0mm / 1.5mm / 1.7mm
Specialized Paint Application : Depends On Application Viscosity
Advantages:Higher transfer efficiency
Excellent paint finish
Less bounce back of paint during application due to low
working pressure.
Less air consumption due to low working pressure.
Paint carrying passage of SS resulting less wear and tear
Light weight compared to competitor’s spray guns.
Slim SP HVLP - WALCOM Italy
Recommended For : Higher Productivity Concern Paint Shops.Can be used with Pressure feed Tanks, DD Pump, Low Pressure Transfer Pumps
Areas Of Application : Nozzle SizePrimer Application Epoxy, Zinc Rich etc: 1.5mm
Final Finish Paints Synthetic Enamel : 1.5mm
Lacquer Applications : 1.0mm
Adhesive /Glue Applications : 1.0mm / 2.5mm / 1.7mm
Specialize Paint Application : Depends On
eg. Ceramic Industry Application Viscosity
Advantages:Higher Transfer efficiency
Paint carrying passage of SS resulting less wear and tear
Light weight compare to competitor’s spray guns.
Recommended For :
Higher Productivity Concern Paint Shops.
Can be use with Pressure Tanks, DD Pump, Low Pressure
Transfer Pumps
Areas Of Application Nozzle Size
Primer Application Epoxy, Zinc Rich etc : 1.5mm
Final Finish Paints Synthetic Enamel ` : 1.5mm
Lacquer Applications : 1.0mm
Adhesive /Glue Applications : 1.0mm / 2.5mm / 1.7mm
Specialize Paint Application Depends On
eg. Ceramic Industry Application Viscosity
Advantages:
Higher Application Speed Compare to HVLP Spray Guns
Paint carrying passage of SS resulting less wear and tear
Light weight compare to competitor’s spray guns.
Recommended For : Higher Productivity Concern Paint Shops.
Areas Of Application Nozzle Size
Primer Application Epoxy, Zinc Rich etc : 1.5mm
Final Finish Paints Synthetic Enamel : 1.5mm
Lacquer Applications : 1.0mm
Adhesive /Glue Applications : 1.0mm / 2.5mm /
1.7mm
Specialize Paint Application Depends On
eg. Ceramic Industry Application Viscosity
Advantages:Higher Application Speed Compare to HVLP Spray Guns
Paint carrying passage of SS resulting less wear and tear
Light weight compare to competitor’s spray guns.
2
Slim S Conventional- WALCOM Italy
Slim SP Conventional - WALCOM Italy
3
UR/S PLUS - WALMEC Italy
Recommended For : Conventional Painting Industry.
Recommended For : Conventional Painting Industry.
Areas Of Application : Nozzle SizePrimer Application Epoxy, Zinc Rich etc: 1.4mm
Final Finish Paints Synthetic Enamel : 1.4mm
Lacquer Applications : 1.4mm
Adhesive /Glue Applications : 1.8mm / 2.2mm /2.5mm 3.0mm
Dye and Ink Application: 1.4mm/1.8mm
Specialize Paint Application : Depends On
eg. Ceramic & Wood Coating Industry Application Viscosity
Advantages:Higher transfer efficiencyExcellent paint finish Less bounce back of paint during applicationdue to low working Pressure.Less air consumption due to low working pressure.Paint carrying passage of SS resulting less wear and tearLight weight compare to competitor’s spray guns.
Areas Of Application : Nozzle SizePrimer Application Epoxy, Zinc Rich etc: 1.4mm
Final Finish Paints Synthetic Enamel : 1.4mm
Lacquer Applications : 1.4mm
Adhesive /Glue Applications : 1.8mm / 2.2mm /2.5mm 3.0mm
Dye and Ink Application: 1.4mm/1.8mm
Specialize Paint Application : Depends On
eg. Ceramic & Wood Coating Industry Application Viscosity
Advantages:Higher Application Speed Compare to HVLP Spray GunsLight weight compare to competitor’s spray guns.Better paint finish compare to other spray gun in samecategory
UR PLUS - WALMEC Italy
4
Ego HVLP - WALCOM Italy
Recommended For : Small Objects , Decorationand Touch Up
Areas Of Application : Nozzle SizeFinal Finish Paints PU, Epoxy, Enamel : 1.2mm
Lacquer Applications : 1.2mm
1.0mm or 1.2mm
Advantages:Higher transfer efficiency
Excellent paint finish for
Less bounce back of paint during application due to low
working pressure.
Less air consumption due to low working pressure.
Paint carrying passage of SS resulting less wear and tear
Light weight compare to competitor’s spray guns.
RD - WALMEC Italy
Recommended For : Painting Of Inaccessible areas
Areas Of Application : Nozzle SizeFinal Finish Paints PU, Epoxy, Enamel : 1.7mm
Lacquer Applications : 1.7mm
Specialize Paint Application : Depends On Application Viscosity
Advantages:Lateral spray allows to reach inaccessible areas while painting
Paint carrying passage of SS resulting less wear and tear.
5
Recommended For : Small Objects, Decoration and Touch Up
Areas Of Application : Nozzle SizeFinal Finish Paints PU, Epoxy, Enamel : 1.0mm
Lacquer Applications : 1.0mm
Specialize Paint Application : Depends On Application Viscosity
0.7mm or 1.0mmAdvantages:Excellent paint finish
Less bounce back of paint during application due to low
working pressure.
Paint carrying passage of SS resulting less wear and tear
Light weight compare to competitor’s spray guns.
Also comes in round nozzle.
ES RV - WALMEC Italy
FRL
Filters and filter groups mounted on the correct air installation (air
compressor outlet, wall air outlets, painting booth) contribute in elevating
the quality of work by filtering the air from any impurity which can be
generated inside the workplace. They guarantee the use of air perfectly
treated of condensation, oil and residual humidity.
Hoses, Polyurethane Material.Walcom Air hose (P.U.)
Air Hose, Paint Hose
Spray mask, for clean air topainter breathing.Air Flow regulator for Gun.
Spray Mask
?
Recommended For :Use of medium to Large quantity of paint application without interrupting work. Areas of Application :Suggested for use in the wood industry, adhesive application, industrial painting and any situation requiring the use of air spray guns with low pressure productdelivery.
Advantages :The Paint can be into the pressure Feed tank or a dummy in the pressure feed Tank, thus avoiding cleaning of the whole
Subject to application viscosity.
Available In :5ltr, 9ltr, 22ltr & 45ltr capacity. 2ltr make to order minimum qty 5nos.2ltr ( order of 5nos.)
directly poured container of paint can be placed
pressure Feed tank.
minimum
PRESSURE FEED TANKS
PAINT FEED AND FLUSH SYSTEM
6
Recommended For :Use of medium to Large quantity of paint application
without interrupting work.Ideal for Multiple Color Application
Areas Of Application : for use in the wood Coating
industry, adhesive industry, industrial painting, contracting
industry and any situation requiring the use of air spray
guns with low pressure product delivery.
Advantages :The spray product may be poured directly into thepressure feed tank or inserted in its own container into the
pressure feed tank thus avoiding cleaning subject to application viscosity . The F & F system has the advantage of lessmaintenance. Easy to clean and fast color change is
possible. Available In :5ltr, 9ltr, 22ltr & 45ltr capacity.
DIAPHRAGM PUMPS
Recommended For :Use of medium to Large quantum of paint application without
interrupting work.
Area Of Application :Suggested for use in the plastic coating, UV Coating, wood
Coating industry, adhesive industry, industrial painting,
contracting industry and any situation requiring the use of air
spray guns with low pressure product delivery.
Advantages :The spray product directly suck from the pressure tank with
the help of suction system or suction system can be directly
inserted in the paint container thus avoiding cleaning,
handling and change over timing. More than 2guns can be used for same paint application on
one pump .
Available In :Plastic, Aluminum, Stainless Steel
8
9
Industrial Spray Booth
Bench Type Dry Series ( Lab Model)
Bench TypeDryMax Bench Type spray booth with metallic baffle suitable for paint consumption from 5 to 7 ltrs per shift.
Sizes available in: 2.5 ft upto 4 ft and onwards
Enclosure Type Dry Series
Wet SeriesDryMax Bench Type spray booth with metallic baffle suitable for paint consumption from 7 to 12 ltrs per shift.
Sizes available in: 4 ft upto 12.5 ft and onwards
P.C. : 5-15 ltrs.Size : 3 ft. onwards
P.C. : 5-7 ltrs.Size : 2.5 - 4 ft.
Water Wash With Pump ECOAQUA BETA Bench Type (BT) on Legs with WATER tank and Water Arrestors with Pump Water Curtain. Available UPTO 5 FT Width.
Sizes available in: 10 to 25 Ltrs
( Lab Model)
Water Wash With Pump Enclosure Type
Standard Spray Booth with water curtain with pump suitable for paint consumption from 10 to 50 ltrs per shift.
Sizes available in: 2.5 ft upto 12.5 ft and onwards
Water Wash
Standard Spray Booth without water curtain without pump suitable for paint consumption from 10 to 25 ltrs per shift.
Sizes available in: 2.5 ft upto 12.5 ft and onwards
P.C. : 10-25 ltrs.Size : 3 ft. onwards
P.C. : 10-25 ltrs.Size : 3 - 4 ft.
P.C. : 10 ltrs. & moreSize : 3 ft. onward
Painting cum drying
chamber (Complete booth with
puff-insulated panels, double
blower, metallic basement)
Product Details of Model
10
CAR BODY SHOP PAINT BOOTHS
Inlet/exhaust Blowers with Motors
CAPACITY
Component
painting cum drying
chamber (Complete
booth with puff-insulated
panels, double blower)
Painting cum
dryingchamber (Complete
booth with puff-insulated
panels, double blower,
civil basement)
11
Tunnel Paint Booth
Wood Coating Booth
12
Prep-station for dry sanding & primer painting. ( Negative air Pressure & positive air Pressure )
PRESSURE
Prep-station with Positive pressure.
13
14
Product Details
CAPACITY
15
EPCOAT INFRA RED HEATING SYSTEMS
16
CEILING FILTER
Working Capacity: 100 - 150 Working hrsDust Holding Capacity : 235 g/m2
PRE FILTER
Technical Specification:
Type :Diffusion Media
Bonding Process :Thermal Bonded &Tackified
Make :Imported
Model :NF580
Classification :F5 (EN779)
Thickness :22mm
Rated Air Flow :900 m3/hr
Media Velocity :0.25 m/s
Avg.Syn Dust Arrestance :96%
Efficiency :99% down to 5 Micron
Initial Pressure Drop :21 Pa
Final Pressure Drop :450 Pa
Temp Resistance :Up To 100C
Dust Holding Capacity :415 g/m2
PMT Rating :R0
Floor Filter
Epcoat Anti dust coating,
used in paint booth for
avoiding over spray
as well as keeping booth panels clean.
Antidust Coating
17
Technical Specification:
Type : Mat Type, Glass Fiber
Classification : G3 (En779)
Colour : Green/White
Thickness : 90 mm (3.5'')
Weight : >300g/m2
Rated Air Flow : 0.65 m3/s
Media Velocity : 1m/s
Initial Pressure Drop : <38 Pa
Final Pressure Drop : 250 Pa
Av. Arrestance : >70%
Dust Holding Capacity : 750 g/m2
Flame Resistance : Non Flammable
Cartec Range of Products:
Cartec Perfect Polish is a unique combination of cleaner and wax in one, which cleans, poes sand waxes in one easy application. Restores dull paintwork and removes scratches, to leave a high gloss finish. It cn be used by hand or polishing machine.Packaging – 1liter,5 liter,200 liter
lish
PERFECTPOLISH ONE STEP COMPOUND BENEFIT OF ONE STEP COMPOUND
• Use: Remove paint defaults such as
overspray, orange peel effect or deep
scratches by using professional
sanding materials. • Make use of sanding paper with 1500-
grit or finer. Polish the surface up to
high gloss using the One Step Polish. • For an optimal result use a polishing
machine with a woolpad. Use a low to
medium speed.(1500Rpm) When the
desired result is achieved, remove the
possible remaining residues by using
a Clean Cloth and rub the surface to
high gloss.PACKAGING OF ONE STEP COMPOUND
• 5 kg • 100gm cup • 200 kg
EACH KIT OF WAXGUARD CONTAINS
• WAXGUARD – 100 ML – 1NOS
• PREPFIRST -- 100 ML – 1NOS
• SHAMPOO - 100 ML – 1NOS
• DOMAIN CARD – 1NOS
• GLASS STICKER – 1 NOS
• SPONGE - 1NOS
• DIRECTION TO USE – 1NOS
• MEMBERSHIP CARD
with unique membership no – 1nos
WAXGUARD
• WaxGuard is a unique paint protection product for your car. It offers a visibly higher and deeper
gloss to the paint surface of your car. WaxGuard also rovides a protective layer against traffic
film and dirt associated with extreme weather conditions.
• WaxGuard is a product brought to you by Cartec. For more then 20 years, Cartec have supplied
car care products to the professional car cleaning and detailing market.
• Cartec serves specialist companies involved in the professional treatment of paint surfaces.
• Thanks to our extensive knowledge of this market, we have been able to develop High Quality
products like WaxGuard.
• WaxGuard has been developed within our own laboratory. The formulation has been tested
across our markets and under the most extreme conditions; currently WaxGuard is available in
more than 15 countries.
18
Customized Solution
19
AN ISO 9001 : 2008 Company
AN ISO 9001 : 2008 Company
Regd. Office:50, Khatri Estate, Beside Elphinstone Bridge, Elphinstone Road (W), Mumbai- 400 013.Tel: 022 24222337 Fax: 022 24381242
Sales Office:205-207, Nav-Vivek Industrial Estate, Plot No. 424, Mogul Lane, Mahim (W), Mumbai – 400 016.Tel: 022 24444278 / 24448701 E-mail: [email protected] • Website: www.epcoat.com
Epcoat Surface Systems