Festool Promotion 2015 C&L

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00

6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599

End

s mar

ch 2015

Faster. Easier. Better.

www.festool.com.au

Because clean is simply healthier.See inside for dust extraction system solutions.

Without dust extraction With dust extraction

SEE INSIDE FOR SpEcIal OFFERS $$$

Follow the Joiner’s Journey

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Follow the joiner’s dust extractor journey at www.festool.com.au

Because clean is simply healthier. Work dust free onsite or in the workshop while staying organised.

2 Dust Extraction 3Dust Extraction


Follow the Joiners Journey

Lots of space for a large amount of chipsThe Festool flat filter saves space, allowing full use of the container’s capacity.

Intelligent on/off buttonWhether it’s a quick saw cut or surface treatment, the extractor automatically turns on and off with the power tool.

Keep organisedcT Mini through to cT 48 have an integrated Systainer docking station - connect and stack Systainers to keep your worksites clean and tidy.

CompatibilityFestool mobile dust extractors are compatible with all Festool electric and air tools.

Fast changes between machinesconnect your tool to your extractor easily, then switch to another tool in seconds.

Spotless work stationa clean work site minimises waste, clean up time and leaves a positive impression on customers.

cT Mini | F28361

• Capacity 7.5L• Systainer Storage

Box | 499901

$775 SAVE $120

cT Midi | F28362

• Capacity 15L• Systainer Storage

Box | 499901

$829 SAVE $120

cT Wings | 500312

$69

cT 36 | F28364

• Capacity 36l• Cleaning set• Systainer Storage Box | 499901

$1,265 SAVE $120

cT 48 | F28365

• Capacity 48l• 3.5 metre hoseBox | 499901

$1,670 SAVE $120

cT 26 | F28363

• Capacity 26l• Cleaning set• Systainer Storage

Box | 499901

$1,155 SAVE $120

Help, just when you need itFor clamping and securing work pieces to horizontal and vertical surfaces. Attach to a 27mm suction hose, switch on the dust extractor and the work piece is held in place.

• Frees up your hands for scribing• Helps you work effortlessly, accurately and safely• Small and compact• For use with Ø 27mm suction hosesSee video at www.festool.com.au

HEPA FilterHEPA

FilterHEPA Filter

dust Free Organised sets

The Box With A SystemSafe and systematic - suitable for all your sundry items such as nails, screws, blades and hand tools. The Systainer Storage Box is the ideal companion to connect to your dust extractor for easy transport on and off site while keeping all your tools at hand.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Follow the joiner’s dust extractor journey at www.festool.com.au

Because clean is simply healthier. Work dust free onsite or in the workshop while staying organised.

2 Dust Extraction 3Dust Extraction


Follow the Joiners Journey

Lots of space for a large amount of chipsThe Festool flat filter saves space, allowing full use of the container’s capacity.

Intelligent on/off buttonWhether it’s a quick saw cut or surface treatment, the extractor automatically turns on and off with the power tool.

Keep organisedcT Mini through to cT 48 have an integrated Systainer docking station - connect and stack Systainers to keep your worksites clean and tidy.

CompatibilityFestool mobile dust extractors are compatible with all Festool electric and air tools.

Fast changes between machinesconnect your tool to your extractor easily, then switch to another tool in seconds.

Spotless work stationa clean work site minimises waste, clean up time and leaves a positive impression on customers.

cT Mini | F28361

• Capacity 7.5L• Systainer Storage

Box | 499901

$775 SAVE $120

cT Midi | F28362

• Capacity 15L• Systainer Storage

Box | 499901

$829 SAVE $120

cT Wings | 500312

$69

cT 36 | F28364

• Capacity 36l• Cleaning set• Systainer Storage Box | 499901

$1,265 SAVE $120

cT 48 | F28365

• Capacity 48l• 3.5 metre hoseBox | 499901

$1,670 SAVE $120

cT 26 | F28363

• Capacity 26l• Cleaning set• Systainer Storage

Box | 499901

$1,155 SAVE $120

Help, just when you need itFor clamping and securing work pieces to horizontal and vertical surfaces. Attach to a 27mm suction hose, switch on the dust extractor and the work piece is held in place.

• Frees up your hands for scribing• Helps you work effortlessly, accurately and safely• Small and compact• For use with Ø 27mm suction hosesSee video at www.festool.com.au

HEPA FilterHEPA

FilterHEPA Filter

dust Free Organised sets

The Box With A SystemSafe and systematic - suitable for all your sundry items such as nails, screws, blades and hand tools. The Systainer Storage Box is the ideal companion to connect to your dust extractor for easy transport on and off site while keeping all your tools at hand.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


4 Sawing 5Sawing

Follow the Joiner’s Journey with the Plunge cut saw at www.festool.com.au



Guide Rail = Straight Cutsall plunge saws fit easily onto a guide rail for straight, exact cuts every time.

No more splintersattach the splinterguard to all plunge cut saws for splinter free cuts on both sides of the blade. Saving you time with no rework required.

Angles? No problemBevel cuts up to 47° are easy with the plunge cut saws. The saw automatically positions the blade on the cut line.

Wide range of materialsTimber, MDF, Fibre cement sheet, or aluminium: with the switch of a blade you will have the perfect cut every time.

Mains Power or CordlessDepending on the job, there is a plunge saw for you. Job site with no power? No problem, with the TSC 55. Setting up for all day cutting? Then look no further than the corded range.

A Clean CutWhen you pair a plunge saw with Festool dust extraction, you will achieve a clean and precise result - without mess!

corded 160mm Plunge saw with Guide rail TS 55R Plus FS | 561655

• Power - 1,200w / up to 5,200rpm

• Cutting depth 0-55mm• 160mm Saw Blade• Splinterguard • FS 1400/2 Guide Rail• Systainer Sys 4

$1,025

corded 210mm Plunge saw with Guide rail TS 75 Plus FS | 561512

• Power - 1,600w / up to 3,550 rpm

• Cutting depth 0-75mm• 210 mm Saw Blade• Splinterguard • FS 1400/2 Guide Rail• Systainer Sys 5

$1,415

160mm Fastfix adjustable Lever clamp | 491594

$79

Gecko suction clamp set | 493507

$129

Quick action rapid clamp | 489790

$82

cordless 160mm Plunge saw with Guide rail TSC 55 plus FS | 270682

• Power - 15V - 36V• Cutting depth 0-55mm• 2 x battery packs 18V Li-ion 4.2Ah• Battery Charger TLC 3• 160mm Saw Blade• Dust collection bag• Splinterguard • FS 1400/2 Guide Rail • Systainer Sys 5

$1,199

complete range of Guide rails available: • 800mm• 1080mm• 1400mm• 1900mm

• 2400mm• 2700mm• 3000mm• 5000mm

FROM $125

Large range of saw Blades ideal for• Timber• Plastic• Aluminium

• Laminate• Fibre Cement Sheetplus many more

FROM $66

sawing accessories

BONUSValued at $105

Guide Rail Bag with any Plunge Saw (466357)

Your sawing solution for perfect resultsFind your top quality German made cutting solution in the Festool TS plunge Saw range.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


4 Sawing 5Sawing

Follow the Joiner’s Journey with the Plunge cut saw at www.festool.com.au



Guide Rail = Straight Cutsall plunge saws fit easily onto a guide rail for straight, exact cuts every time.

No more splintersattach the splinterguard to all plunge cut saws for splinter free cuts on both sides of the blade. Saving you time with no rework required.

Angles? No problemBevel cuts up to 47° are easy with the plunge cut saws. The saw automatically positions the blade on the cut line.

Wide range of materialsTimber, MDF, Fibre cement sheet, or aluminium: with the switch of a blade you will have the perfect cut every time.

Mains Power or CordlessDepending on the job, there is a plunge saw for you. Job site with no power? No problem, with the TSC 55. Setting up for all day cutting? Then look no further than the corded range.

A Clean CutWhen you pair a plunge saw with Festool dust extraction, you will achieve a clean and precise result - without mess!

corded 160mm Plunge saw with Guide rail TS 55R Plus FS | 561655

• Power - 1,200w / up to 5,200rpm

• Cutting depth 0-55mm• 160mm Saw Blade• Splinterguard • FS 1400/2 Guide Rail• Systainer Sys 4

$1,025

corded 210mm Plunge saw with Guide rail TS 75 Plus FS | 561512

• Power - 1,600w / up to 3,550 rpm

• Cutting depth 0-75mm• 210 mm Saw Blade• Splinterguard • FS 1400/2 Guide Rail• Systainer Sys 5

$1,415

160mm Fastfix adjustable Lever clamp | 491594

$79

Gecko suction clamp set | 493507

$129

Quick action rapid clamp | 489790

$82

cordless 160mm Plunge saw with Guide rail TSC 55 plus FS | 270682

• Power - 15V - 36V• Cutting depth 0-55mm• 2 x battery packs 18V Li-ion 4.2Ah• Battery Charger TLC 3• 160mm Saw Blade• Dust collection bag• Splinterguard • FS 1400/2 Guide Rail • Systainer Sys 5

$1,199

complete range of Guide rails available: • 800mm• 1080mm• 1400mm• 1900mm

• 2400mm• 2700mm• 3000mm• 5000mm

FROM $125

Large range of saw Blades ideal for• Timber• Plastic• Aluminium

• Laminate• Fibre Cement Sheetplus many more

FROM $66

sawing accessories

BONUSValued at $105

Guide Rail Bag with any Plunge Saw (466357)

Your sawing solution for perfect resultsFind your top quality German made cutting solution in the Festool TS plunge Saw range.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


6 Router 7KapEX

Follow the Joiner’s Journey Videos at www.festool.com.au see the KaPEX in action at festool.com.au



99% Dust Freepair a dust extractor with your router and achieve precise, dust free results every time.

Change cutters in an instantThe spindle stop with rocker and ratchet principle allows you to change the cutter easily.

55mm Plunge router OF 1010 in Systainer | 574337

• 1010 watt• 55mm plunge depth• 2.3kg

$795



$1,545

mobile Work stand | 497354

• Two folding extensions• Integrated flip stop• Measurement scale• Adjustable Legs• Expands from 1400mm to 2400mm

$949

260mm sliding compound mitre saw KapEX 120 | 561288

• HW universal saw blade• Smart bevel• Workpiece clamp• Cutting capacity at 90/90:

305x88mm

• Blade Diameter: 260mm• Special cutting capacity:

20 x 120mm• Weight: 21.5kg

$1,890

Precise depth settingThe precise depth adjuster takes just a few seconds to adjust the routing depth accurately to 1/10mm.

The right router for every applicationprofiling, trenching, rebating and routing dovetails are just some of the applications for the Festool range.

KaPEX sliding compound mitre sawprecision trimming and simple cross cuts

make work faster and easier.

Clear Working AreaUse the Kapex with dust extraction for a dust free and clear working space.

Smart BevelRapid measuring of internal and external angles can be transferred easily and accurately to the saw with the smart bevel.

Precise adjustmentCut bevels up to 47° on either side and mitres up to 50° to the left and 60° to the right.

Valued at $125

FS 800/2 Guide Rail when you purchase an OF 1010 Router (491499)

Router Accessory Set ONLY $415 when purchased with an OF 2200

3 year warranty for your peace of mind.

Invest in quality you can trust.

BONUS SpEcIalALSo AVAILABLEcomplete set with KaPEX and mobile Work stand | 561415

$2,750 SAVE $89

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


6 Router 7KapEX

Follow the Joiner’s Journey Videos at www.festool.com.au see the KaPEX in action at festool.com.au



99% Dust Freepair a dust extractor with your router and achieve precise, dust free results every time.

Change cutters in an instantThe spindle stop with rocker and ratchet principle allows you to change the cutter easily.



$795



$1,545

mobile Work stand | 497354

• Two folding extensions• Integrated flip stop• Measurement scale• Adjustable Legs• Expands from 1400mm to 2400mm

$949

260mm sliding compound mitre saw KapEX 120 | 561288

• HW universal saw blade• Smart bevel• Workpiece clamp• Cutting capacity at 90/90:

305x88mm

• Blade Diameter: 260mm• Special cutting capacity:

20 x 120mm• Weight: 21.5kg

$1,890

Precise depth settingThe precise depth adjuster takes just a few seconds to adjust the routing depth accurately to 1/10mm.

The right router for every applicationprofiling, trenching, rebating and routing dovetails are just some of the applications for the Festool range.

KaPEX sliding compound mitre sawprecision trimming and simple cross cuts

make work faster and easier.

Clear Working AreaUse the Kapex with dust extraction for a dust free and clear working space.

Smart BevelRapid measuring of internal and external angles can be transferred easily and accurately to the saw with the smart bevel.

Precise adjustmentCut bevels up to 47° on either side and mitres up to 50° to the left and 60° to the right.

Valued at $125

FS 800/2 Guide Rail when you purchase an OF 1010 Router (491499)

Router Accessory Set ONLY $415 when purchased with an OF 2200

3 year warranty for your peace of mind.

Invest in quality you can trust.

BONUS SpEcIalALSo AVAILABLEcomplete set with KaPEX and mobile Work stand | 561415

$2,750 SAVE $89

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


BONUSValued at $187

Trim Stop and Cross Stop when you purchase a Domino Machine

We are here to help - with expert advice, on-site demos and excellent after sales service.

8 DOMINO 9DOMINO

Visit festool.com.au to see the joiner’s domino experience.



Unique Solutiona unique, portable mortise and tenon machine that lets you join anything - from narrow workpieces to large panels.

Any Position or AngleSet the routing angle anywhere between 0-90° or select from a range of preset positions.

domino DF 500 Joining Machine | 574328

• Power consumption: 420W• No-load speed: 24,300rpm• Suits Domino Cutter Ø: 4, 5, 6, 8, 10mm• Routing height adjuster: 5-30mm• Weight 3.2kg

$1,440


• Power consumption: 720W• No-load speed: 21,000rpm• Suits Domino Cutter Ø: 8, 10, 12, 14mm• Routing height adjuster: 10-50mm• Weight 5.2kg

$2,035

domino assortment systainer | 498899For cutter sizes 4 - 10mm

NORMAL RRP $411

SPECIAL RRP $300

| 493487 | 498590

domino XL assortment systainer 498204 | For cutter sizes 8 & 10

498205 | For cutter sizes 12 & 14

SPECIAL RRP $300

The domino Joining systemcombines exceptional versatility with

simple handling and maximum precision.

Adjustable hole widthWidth of the mortises can be changed simply by adjusting the tool while in operation.

Dust Free WorkDust Extraction on the Domino extracts up to 95% of chips produced.

Precise and Accuratepreset height adjustments, depth stop and retractable stop pins allow for quick and precise work.

Domino Strength available in 6 sizes to suit the application, the solid design of the Domino ensures strong and sturdy joins.

Suitable AccessoriesWide range of accessories to help you achieve effortless, quick and reliable results.

dOmInO accessories

domino router stop attachment | 494847

For securely joining round pieces such as hand rails

$78

domino Vertical stop attachment | 495666

Index stops for accurate reference points

$41

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


BONUSValued at $187

Trim Stop and Cross Stop when you purchase a Domino Machine

We are here to help - with expert advice, on-site demos and excellent after sales service.

8 DOMINO 9DOMINO

Visit festool.com.au to see the joiner’s domino experience.



Unique Solutiona unique, portable mortise and tenon machine that lets you join anything - from narrow workpieces to large panels.

Any Position or AngleSet the routing angle anywhere between 0-90° or select from a range of preset positions.


• Power consumption: 420W• No-load speed: 24,300rpm• Suits Domino Cutter Ø: 4, 5, 6, 8, 10mm• Routing height adjuster: 5-30mm• Weight 3.2kg

$1,440


• Power consumption: 720W• No-load speed: 21,000rpm• Suits Domino Cutter Ø: 8, 10, 12, 14mm• Routing height adjuster: 10-50mm• Weight 5.2kg

$2,035

domino assortment systainer | 498899For cutter sizes 4 - 10mm

NORMAL RRP $411

SPECIAL RRP $300

| 493487 | 498590

domino XL assortment systainer 498204 | For cutter sizes 8 & 10

498205 | For cutter sizes 12 & 14

SPECIAL RRP $300

The domino Joining systemcombines exceptional versatility with

simple handling and maximum precision.

Adjustable hole widthWidth of the mortises can be changed simply by adjusting the tool while in operation.

Dust Free WorkDust Extraction on the Domino extracts up to 95% of chips produced.

Precise and Accuratepreset height adjustments, depth stop and retractable stop pins allow for quick and precise work.

Domino Strength available in 6 sizes to suit the application, the solid design of the Domino ensures strong and sturdy joins.

Suitable AccessoriesWide range of accessories to help you achieve effortless, quick and reliable results.

dOmInO accessories

domino router stop attachment | 494847

For securely joining round pieces such as hand rails

$78

domino Vertical stop attachment | 495666

Index stops for accurate reference points

$41

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


SpEcIalPLANEX Guide Extension ONLY $140 with any PLANEX or PLANEX Set PurchasedUsT EXTracTIOn

Sanding with dust extraction keeps the surface temperature cooler, preventing clogging and ensuring a longer service life of your tool, pads and abrasives.

10 years spare part availability - your ETS will have you sanding for years!

10 Sanding 11

Visit festool.com.au to see the ETs sander

scan to see it in actionsee video: www.festool.com.au



For Greater Efficiencyclean operation - perfect dust extraction for clear view of the work surface and a dust free workstation.

Comfortable SandingDesigned to fit in your hand, the lightweight machine features a softgrip material to considerably improve your grip on the machine, and increase comfort.

125mm Eccentric sander • 310W • Eccentric motion speed:

4,000 - 10,000 min• Stroke: 3mm• 1.8kgETS 125 in Carton | 571608

SPECIAL RRP $465Systainer models also available.


4,000 - 10,000 min• Stroke: 3mm• 1.8kgETS 150/3 fixed lead in Carton | 571905


150mm Eccentric sander• 310W • Eccentric motion speed:



Lhs 225 PLanEX sander | 571576

• 550W• Sanding disc Ø: 215mm • In a maxi systainer

$1,849

36 Litre auto-clean dust Extractor for PLanEX | 584063

$1,550

Extend the length of the sander for hard to reach areas or high ceilings.

a Favourite For Fine sandingThe lightweight and compact sander designed to produce an excellent surface finish.

The Ideal Plaster sanding solutionTop quality finishes, with the flexibility to use in a

wide range of areas in a dust free environment.

Dust Free SolutionOptimised to meet the requirements of the plaNEX, the clEaNTEX ac dust extractor automatically cleans the filter system to prevent clogging.

Sand right to the edgesconsistent sanding results even right up to the edge with economical, long lasting abrasives.

Built-In Dust RemovalWith Multi Jetstream* the surface remains dust free, meaning a consistently high performance and perfect result.* For all sanding machines with Ø 150mm, when paired with extraction

PLanEX sander set | 273476long Reach sander plaNEX in a Systainer SYS MaXI with cT auto clean Dust Extractor, capacity 36l

$2,595

Flexibility to Reachconvert your plaNEX from short reach to a long reach sander in just a few hand movements with the quick release connector.

plaNEX

| 495169

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


SpEcIalPLANEX Guide Extension ONLY $140 with any PLANEX or PLANEX Set PurchasedUsT EXTracTIOn

Sanding with dust extraction keeps the surface temperature cooler, preventing clogging and ensuring a longer service life of your tool, pads and abrasives.

10 years spare part availability - your ETS will have you sanding for years!

10 Sanding 11

Visit festool.com.au to see the ETs sander

scan to see it in actionsee video: www.festool.com.au



For Greater Efficiencyclean operation - perfect dust extraction for clear view of the work surface and a dust free workstation.

Comfortable SandingDesigned to fit in your hand, the lightweight machine features a softgrip material to considerably improve your grip on the machine, and increase comfort.


4,000 - 10,000 min• Stroke: 3mm• 1.8kgETS 125 in Carton | 571608





150mm Eccentric sander• 310W • Eccentric motion speed:



Lhs 225 PLanEX sander | 571576

• 550W• Sanding disc Ø: 215mm • In a maxi systainer

$1,849

36 Litre auto-clean dust Extractor for PLanEX | 584063

$1,550

Extend the length of the sander for hard to reach areas or high ceilings.

a Favourite For Fine sandingThe lightweight and compact sander designed to produce an excellent surface finish.

The Ideal Plaster sanding solutionTop quality finishes, with the flexibility to use in a

wide range of areas in a dust free environment.

Dust Free SolutionOptimised to meet the requirements of the plaNEX, the clEaNTEX ac dust extractor automatically cleans the filter system to prevent clogging.

Sand right to the edgesconsistent sanding results even right up to the edge with economical, long lasting abrasives.

Built-In Dust RemovalWith Multi Jetstream* the surface remains dust free, meaning a consistently high performance and perfect result.* For all sanding machines with Ø 150mm, when paired with extraction

PLanEX sander set | 273476long Reach sander plaNEX in a Systainer SYS MaXI with cT auto clean Dust Extractor, capacity 36l

$2,595

Flexibility to Reachconvert your plaNEX from short reach to a long reach sander in just a few hand movements with the quick release connector.

plaNEX

| 495169

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


12 13Diamond cutting

check out the concrete grinding videos at festool.com.au

See www.festool.com.au for more discs.


Precise Control Smooth start up guarantees a gentle increase in speed, and continuous temperature monitoring for protection.

DIA HardResurfacing and removal of old weathered concrete, removing epoxy resins, roughening smooth surfaces.

DIA AbrasiveGrinding green concrete, milling hard cement plaster on walls and exteriors as well as levelling concrete floors.

DIA UniResurfacing and removing paints and coatings from concrete surfaces and plaster.

DIA ThermoFor removing thermo-elastic and soft materials, e.g. elastic adhesives for PVC, wooden or parquetry flooring.

130mm diamond Grinder RG 130 in Systainer | 768976

• Rated input: 1,600 W• No-load speed: 3,000 - 7,700 rpm• Grinding disc: 130mm• Weight: 3.8kg

$1,050

80mm diamond Grinder RG80 in Systainer | 768973

• Rated input: 1100W• No-load speed:

2,000 - 5,900 rpm• Grinding disc: 80mm• Weight: 3.2kg

$1,050

| 768021

SPECIAL RRP $412| 767983

SPECIAL RRP $212

| 767984

SPECIAL RRP $212

| 769169

SPECIAL RRP $215

| 769082


SPECIAL RRP $544

premium Disc | 768017SPECIAL RRP $164Standard Disc | 499972SPECIAL RRP $120premium Disc | 768018SPECIAL RRP $164Standard Disc | 499973SPECIAL RRP $120| 769167

SPECIAL RRP $164

| 768023

SPECIAL RRP $220

| 768022

SPECIAL RRP $412

| 769120

SPECIAL RRP $412


• Rated input: 1,600W• No-load speed:

1,000 - 2,200• Grinding disc: 150mm• Weight: 5.9kg

$1,295

36 L heavy duty concrete specialist autoclean dust Extractor CTL 36 HD | 584169

• Power consumption: 350 - 1200W• Airflow Max: 3,900 l/m• Max Vacuum: 24,000 Pa• Container Capacity: 36 litres

$1,395 cleaning set Compact Set D27/36mm in a Systainer | 597697 $140

Your ideal solution for concrete GrindingWith the Diamond Grinder range you will have dust free, efficient removal of material.

Work Hazard FreeWith efficient dust extraction you will be guaranteed a dust free, safe working environment.

Efficient ExtractionExcellent extraction results you will save you time and money with a dust free outcome.

Efficient Material Removal With the RG range quickly and thoroughly overcome any material removal task, eliminating the need for hard manual work with other tools.

80mm diamond Tool heads & discs 150mm diamond Tool heads & discs 130mm diamond discschoose the right combination for your application:

*Tool head & disc not included (add separately below)


*Tool disc not included (add separately below)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


12 13Diamond cutting

check out the concrete grinding videos at festool.com.au

See www.festool.com.au for more discs.


Precise Control Smooth start up guarantees a gentle increase in speed, and continuous temperature monitoring for protection.

DIA HardResurfacing and removal of old weathered concrete, removing epoxy resins, roughening smooth surfaces.

DIA AbrasiveGrinding green concrete, milling hard cement plaster on walls and exteriors as well as levelling concrete floors.

DIA UniResurfacing and removing paints and coatings from concrete surfaces and plaster.

DIA ThermoFor removing thermo-elastic and soft materials, e.g. elastic adhesives for PVC, wooden or parquetry flooring.


• Rated input: 1,600 W• No-load speed: 3,000 - 7,700 rpm• Grinding disc: 130mm• Weight: 3.8kg

$1,050

80mm diamond Grinder RG80 in Systainer | 768973

• Rated input: 1100W• No-load speed:

2,000 - 5,900 rpm• Grinding disc: 80mm• Weight: 3.2kg

$1,050

| 768021


SPECIAL RRP $212

| 767984

SPECIAL RRP $212

| 769169

SPECIAL RRP $215

| 769082


SPECIAL RRP $544

premium Disc | 768017SPECIAL RRP $164Standard Disc | 499972SPECIAL RRP $120premium Disc | 768018SPECIAL RRP $164Standard Disc | 499973SPECIAL RRP $120| 769167

SPECIAL RRP $164

| 768023

SPECIAL RRP $220

| 768022

SPECIAL RRP $412

| 769120

SPECIAL RRP $412


• Rated input: 1,600W• No-load speed:

1,000 - 2,200• Grinding disc: 150mm• Weight: 5.9kg

$1,295

36 L heavy duty concrete specialist autoclean dust Extractor CTL 36 HD | 584169

• Power consumption: 350 - 1200W• Airflow Max: 3,900 l/m• Max Vacuum: 24,000 Pa• Container Capacity: 36 litres

$1,395 cleaning set Compact Set D27/36mm in a Systainer | 597697 $140

Your ideal solution for concrete GrindingWith the Diamond Grinder range you will have dust free, efficient removal of material.

Work Hazard FreeWith efficient dust extraction you will be guaranteed a dust free, safe working environment.

Efficient ExtractionExcellent extraction results you will save you time and money with a dust free outcome.

Efficient Material Removal With the RG range quickly and thoroughly overcome any material removal task, eliminating the need for hard manual work with other tools.

80mm diamond Tool heads & discs 150mm diamond Tool heads & discs 130mm diamond discschoose the right combination for your application:



*Tool disc not included (add separately below)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


14 Systainers 15Systainers


Suitable for setting up your own systainer arrangement. Simply install a 32mm hole pattern.

Each pull-out has a central locking / unlocking mechanism.

sYs roll mobile cart for systainers | 498660

NORMAL RRP $219SPECIAL RRP $197

sYs Toolbox 2 | 499550


sys Toolbox 1 Open Top systainer | 495024


sortainers storage Box 4 drawer | 491522

6 drawer | 491984

9 drawer | 491985

12 drawer | 491986

NORMAL RRP $215 eachSPECIAL RRP $194 each

systainer SYS 1 T-loc assortment Storage Box | 497694


systainer SYS Storage Box | 499901


systainer SYS 2 T-loc Storage Box with lid | 497852

NORMAL RRP $103SPECIAL RRP $93systainer SYS 3 T-loc Storage Box with lid | 498390


range of systainers available in SYS 1, SYS 2, SYS 3, SYS 4, SYS 5

FROM NORMAL RRP $87SPECIAL RRP FROM $78

Pull-out shelf sYs-aZ | 500692 Single shelf

$69

Pull-out shelf sYs-aZ set | 500767

5 in pack

$330

systainer shelf Lock, s-aZ | 500693lock with one master key for retrofitting in the shelf

$20

systainer SYS 1 T-loc with MFT Timber lid | 500076


systainer Mini T-loc | 499622


systainer Midi 3 T-loc | 499621


Trolley for sYs 1-5 T-Loc systainer | 495020


The shelf can be secured with an optional lock and key. The recess for the lock is provided in the shelf

a labelling panel similar to the SYS-T-lOc is integrated so you can mark which devices or accessories belong in the pull out.

Dimensions (L x W x H):396 x 296 x 105mm (one shelf)Weight: 2kg load capacity: 20kg

more time working, less time searchingThe Festool Systainer System is designed to make work easier by providing professional, organised storage solutions.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


14 Systainers 15Systainers


Suitable for setting up your own systainer arrangement. Simply install a 32mm hole pattern.

Each pull-out has a central locking / unlocking mechanism.

sYs roll mobile cart for systainers | 498660


sYs Toolbox 2 | 499550


sys Toolbox 1 Open Top systainer | 495024


sortainers storage Box 4 drawer | 491522

6 drawer | 491984

9 drawer | 491985

12 drawer | 491986

NORMAL RRP $215 eachSPECIAL RRP $194 each

systainer SYS 1 T-loc assortment Storage Box | 497694


systainer SYS Storage Box | 499901


systainer SYS 2 T-loc Storage Box with lid | 497852

NORMAL RRP $103SPECIAL RRP $93systainer SYS 3 T-loc Storage Box with lid | 498390


range of systainers available in SYS 1, SYS 2, SYS 3, SYS 4, SYS 5

FROM NORMAL RRP $87SPECIAL RRP FROM $78

Pull-out shelf sYs-aZ | 500692 Single shelf

$69

Pull-out shelf sYs-aZ set | 500767

5 in pack

$330

systainer shelf Lock, s-aZ | 500693lock with one master key for retrofitting in the shelf

$20

systainer SYS 1 T-loc with MFT Timber lid | 500076


systainer Mini T-loc | 499622


systainer Midi 3 T-loc | 499621


Trolley for sYs 1-5 T-Loc systainer | 495020


The shelf can be secured with an optional lock and key. The recess for the lock is provided in the shelf

a labelling panel similar to the SYS-T-lOc is integrated so you can mark which devices or accessories belong in the pull out.

Dimensions (L x W x H):396 x 296 x 105mm (one shelf)Weight: 2kg load capacity: 20kg

more time working, less time searchingThe Festool Systainer System is designed to make work easier by providing professional, organised storage solutions.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


16 power Select 17


rotary hammer BHC 18 Basic | 564606

$469

*18 V Basic Tools come delivered as bare skins in Systainers, batteries and chargers available separately.

On Tools, Batteries and chargers

Plunge cut saw TSC 55 Basic | 561737

$819

18V 4.2ah Li-Ion Battery | 499751

$110

Battery charger TcL 3 | 499383

$60

Offset chuck | 490294

$65

right angle chuck for DRC / PDC 18 | 769097

$130

depth stop for T18 | 493539

$110

drill/driver T18 Basic | 564605

$409

heavy duty LEd Work Light SYSlITE Kal 1000 | 498567

$225

Universal LEd Work Light SYSlITE UNI | 769079

$79

drill/driver DRc 18 Basic | 500782

$409

hammer drill pDc 18 Basic | 500781

$419

Barrel Grip Jigsaw pSc 420 Basic | 561738

$429d-handle Jigsaw pSBc 420 Basic | 561739

$429

how to buy your Power Select system?choose any power Select skin(s) + add batteries if needed + add a charger if needed = customised kit in Systainer!

Ec-Tec brushless motor with lithium ion battery technology in the BHC provides power, performance and maximum service life for the entire power Select range.

Engage the hammer mode and the pDc cordless drill will drill holes in concrete in seconds.

The PDC / DRC are equipped with 4 gears for the jobs that require the highest torque and speeds of up to 3,800rpm.

For heavy-duty everyday work the T18 cordless drill has a brushless motor for continuous high torque for tough demands.

cut a wide range of materials while working without dust.

Sweeping curves and tight corners are no issue when working with the cordless CARVEX jigsaw.

light and easy to handle the cordless CARVEX jigsaws are perfectly shaped for non-tiring mobile work.

BrUshLEssmOTOr


power Select

range of chucks, batteries and accessories available.

3 YEARWaRRaNTY

18V

right angle chuck for T18 | 490293

$110

BONUS14.4v li-Ion 3.0 amph Battery (498340) Valued at $100

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


16 power Select 17


rotary hammer BHC 18 Basic | 564606

$469

*18 V Basic Tools come delivered as bare skins in Systainers, batteries and chargers available separately.


Plunge cut saw TSC 55 Basic | 561737

$819

18V 4.2ah Li-Ion Battery | 499751

$110

Battery charger TcL 3 | 499383

$60

Offset chuck | 490294

$65

right angle chuck for DRC / PDC 18 | 769097

$130

depth stop for T18 | 493539

$110

drill/driver T18 Basic | 564605

$409

heavy duty LEd Work Light SYSlITE Kal 1000 | 498567

$225

Universal LEd Work Light SYSlITE UNI | 769079

$79

drill/driver DRc 18 Basic | 500782

$409

hammer drill pDc 18 Basic | 500781

$419

Barrel Grip Jigsaw pSc 420 Basic | 561738

$429d-handle Jigsaw pSBc 420 Basic | 561739

$429

how to buy your Power Select system?choose any power Select skin(s) + add batteries if needed + add a charger if needed = customised kit in Systainer!

Ec-Tec brushless motor with lithium ion battery technology in the BHC provides power, performance and maximum service life for the entire power Select range.

Engage the hammer mode and the pDc cordless drill will drill holes in concrete in seconds.

The PDC / DRC are equipped with 4 gears for the jobs that require the highest torque and speeds of up to 3,800rpm.

For heavy-duty everyday work the T18 cordless drill has a brushless motor for continuous high torque for tough demands.

cut a wide range of materials while working without dust.

Sweeping curves and tight corners are no issue when working with the cordless CARVEX jigsaw.

light and easy to handle the cordless CARVEX jigsaws are perfectly shaped for non-tiring mobile work.

BrUshLEssmOTOr


power Select

range of chucks, batteries and accessories available.

3 YEARWaRRaNTY

18V

right angle chuck for T18 | 490293

$110

BONUS14.4v li-Ion 3.0 amph Battery (498340) Valued at $100

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


18 cordless 19cordless

Visit festool.com.au to see the videos



Power and PerformanceWhen power and performance are important you can’t go past the Ec Tec Brushless Motor with lithium Ion battery technology.

18V rotary hammer BHC 18 (Skin) | 564606

• Max impact rate: 4,895 bpm• Battery voltage: 18V Li-ion• Systainer SYS 2 T-Loc• Depth Stop• Additional side handle

$469

drilling dust nozzle | 500483

a cleaner solution for you.• Protection against dust while drilling when used

with a dust extractor• No cleaning required after job is complete

$35

Lightweight hammer solutionWith brushless motor technology and 18V battery power the choice is easy.

Quadrive Impact drill solutionsWith enough power to make light work

of any drilling application.

Comfort is ImportantThe unqiue vibration dampening technology provides comfort in any work situation, especially when working for extended periods.

Fastest cordless drillEquipped with 4 gears for the jobs that require the highest torque and speeds of up to 3,800rpm

Fastfix chuck systemThe angle attachment is ideal for driving in screws around corners and reaching concealed screws in tight areas.

Fastest in its classThe QuaDrive DRc 18 and pDc 18 with 4 speed gearbox, deliver up to 3,800 rpm for incredibly fast drilling and driving.

Light WeightAt only 2.4kg the BHC 18 is designed for one -handed operation and working above your head.

hammer drill Pdc 18 Basic | 500781

• 4-speed gearbox• Up to 3,800 rpm• Up to 76,000 bpm• 18V• 1.9kg• Systainer SYS 2 T-Loc

$419Battery and charger sold separately

drill / driver drc 18 Basic | 500782 • 4-speed gearbox

• Up to 3,800 rpm• 18V • 1.8kg • Systainer SYS 2 T-Loc


cordless accessory

See the 18V BHC in action at festool.com.au

check out the Bcm review on the Bhc 18 cordless hammer drillwww.festool.com.au

OVEraLL sTar raTInGYou can instantly feel the power of the brushless motor but it’s the control you have with these drills that’s amazing WWW.TRADEMAGS.COM.AU/BCM 43

ARTICLE CRITERIA BUILDING HAND TOOLS Operator Comments Report

STAR RATING (Out of five)

BALANCE Very well-balanced tool ★ ★ ★ ★ ★

DESIGN Great design, great features and great accessories ★ ★ ★ ★ ★

ERGONOMICS Feels great in your hand – for long periods too! ★ ★ ★ ★

SPEED Very fast, controlled drilling ★ ★ ★ ★ ★

BATTERY RUN TIME Batteries last a long time. 4.2 amp/h with brushless motor ★ ★ ★ ★

RECHARGE TIME Fast battery recharge ★ ★ ★ ★

TORQUE 10/25NM ★ ★ ★ ★

VIBRATION Vibration is soaked up very nicely with suspension ★ ★ ★ ★ ★

EASE OF OPERATION Very easy to use, changeover bits, and pack away in box ★ ★ ★ ★

PRICE RRP $469.00 and it comes in a Systainer with depth stop and additional side handle

ACCESSORIES

Rubber frame, side handle, depth stop all fit very well into an organised case with a photo of how it all packs away nicely into the Systainer. There is also space in the Systainer for optional extras: charger, batteries, SDS adapter and drilling dust nozzle

OVERALL LIKES All of the above!

OVERALL DISLIKES This drill is a little more expensive... I guess you get what you pay for! Definitely worth it.

OVERALL STAR RATINGThe Germans nailed this one on the head!


3 YEARWaRRaNTY

BrUshLEssmOTOr

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


18 cordless 19cordless

Visit festool.com.au to see the videos



Power and PerformanceWhen power and performance are important you can’t go past the Ec Tec Brushless Motor with lithium Ion battery technology.

18V rotary hammer BHC 18 (Skin) | 564606

• Max impact rate: 4,895 bpm• Battery voltage: 18V Li-ion• Systainer SYS 2 T-Loc• Depth Stop• Additional side handle

$469

drilling dust nozzle | 500483

a cleaner solution for you.• Protection against dust while drilling when used

with a dust extractor• No cleaning required after job is complete

$35

Lightweight hammer solutionWith brushless motor technology and 18V battery power the choice is easy.

Quadrive Impact drill solutionsWith enough power to make light work

of any drilling application.

Comfort is ImportantThe unqiue vibration dampening technology provides comfort in any work situation, especially when working for extended periods.

Fastest cordless drillEquipped with 4 gears for the jobs that require the highest torque and speeds of up to 3,800rpm

Fastfix chuck systemThe angle attachment is ideal for driving in screws around corners and reaching concealed screws in tight areas.

Fastest in its classThe QuaDrive DRc 18 and pDc 18 with 4 speed gearbox, deliver up to 3,800 rpm for incredibly fast drilling and driving.

Light WeightAt only 2.4kg the BHC 18 is designed for one -handed operation and working above your head.

hammer drill Pdc 18 Basic | 500781

• 4-speed gearbox• Up to 3,800 rpm• Up to 76,000 bpm• 18V• 1.9kg• Systainer SYS 2 T-Loc


drill / driver drc 18 Basic | 500782 • 4-speed gearbox

• Up to 3,800 rpm• 18V • 1.8kg • Systainer SYS 2 T-Loc


cordless accessory

See the 18V BHC in action at festool.com.au

check out the Bcm review on the Bhc 18 cordless hammer drillwww.festool.com.au

OVEraLL sTar raTInGYou can instantly feel the power of the brushless motor but it’s the control you have with these drills that’s amazing WWW.TRADEMAGS.COM.AU/BCM 43

ARTICLE CRITERIA BUILDING HAND TOOLS Operator Comments Report

STAR RATING (Out of five)

BALANCE Very well-balanced tool ★ ★ ★ ★ ★

DESIGN Great design, great features and great accessories ★ ★ ★ ★ ★

ERGONOMICS Feels great in your hand – for long periods too! ★ ★ ★ ★

SPEED Very fast, controlled drilling ★ ★ ★ ★ ★

BATTERY RUN TIME Batteries last a long time. 4.2 amp/h with brushless motor ★ ★ ★ ★

RECHARGE TIME Fast battery recharge ★ ★ ★ ★

TORQUE 10/25NM ★ ★ ★ ★

VIBRATION Vibration is soaked up very nicely with suspension ★ ★ ★ ★ ★

EASE OF OPERATION Very easy to use, changeover bits, and pack away in box ★ ★ ★ ★

PRICE RRP $469.00 and it comes in a Systainer with depth stop and additional side handle

ACCESSORIES

Rubber frame, side handle, depth stop all fit very well into an organised case with a photo of how it all packs away nicely into the Systainer. There is also space in the Systainer for optional extras: charger, batteries, SDS adapter and drilling dust nozzle

OVERALL LIKES All of the above!

OVERALL DISLIKES This drill is a little more expensive... I guess you get what you pay for! Definitely worth it.

OVERALL STAR RATINGThe Germans nailed this one on the head!


3 YEARWaRRaNTY

BrUshLEssmOTOr

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Sign up for our e-newsletter

www.festool.com.au/signup

Only available from participating Festool dealers, subject to availability - call 1300 063 900 or visit www.festool.com.au to find your local participating dealer. all price offers are quoted based on recommended retail price inclusive of GST unless otherwise stated. Promotion valid to 31/3/2015 or while stock lasts. No rights whatsoever can be claimed from the information and illustrations in this catalogue. We reserve the right to correct any errors or omissions. Images are for illustrative purposes only.

Festool australiapO Box 4401 Dandenong South VIC 3164phone: 1300 063 900Email: [email protected]

festool.com.au

www.facebook.com.au/festoolaustralia

Festool TV Australia

blog.festool.com.au


65mm One handed Planer EHL 65 in Systainer | 574559

• Parallel Fence• Sys 2 Systainer T-Loc

$565

Weighing only 2.4kg, up to 30% lighter than equivalent planers. The EHL has a low operating noise level, compact design and a low centre of gravity.

Easily attached to a Festool Dust Extractor from the left or right side for efficient dust free planing.

The spiral blade with drawing cut produces a smooth planing pattern and removes up to 4mm in one pass.

Follow the joiner’s planer journey at festool.com.au


BONUSValued at $88Festool Backpack

Date post:	07-Apr-2016
Category:	Documents
Upload:	cl-tool-centre-pty-ltd
View:	221 times
Download:	3 times

Festool Promotion 2015 C&L

Documents