644
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LZ)• Patented re-circulating ball bearing guide system.• Ultra-flat: only 30mm thickness.• Several T-nut mounting options.• Optional mounting accessory kits are available.
The carrier is made from an extruded aluminum profile that houses the re-circulating ball bearing guide system.Thanks to its special profile, the carrier backlash is zero and (4) screws allow adjusting the pre-load of the bearings.
LZ00-0050 LZ00-0100 LZ00-0160 LZ00-0200 LZ01-0200 LZ01-0300 LZ01-0400
Layout for ISO 6432 cylinders
(1)
for rodless cylinders
(1)
Stroke1.968''
(50 mm)3.937''
(100 mm)6.299''
(160 mm)7.874''
(200 mm)7.874''
(200 mm)11.811''
(300 mm)15.748''
(400 mm)
L7.480''
(190 mm)9.448''
(240 mm)11.811''
(300 mm)13.385''
(340 mm)14.763''
(375 mm)18.700''
(475 mm)22.637''
(575 mm)
M0.688''
(17.5 mm)0.688''
(17.5 mm)0.688''
(17.5 mm)0.688''
(17.5 mm)1.377''
(35 mm )1.377''
(35 mm )1.377''
(35 mm )
Weight 1.42 lb 1.65 lb 1.93 lb 2.13 lb 2.36 lb 2.84 lb 3.3 lb
Re-circulating ball bearing guide system
(1) The cylinders are not supplied
Carrier with re-circulating ball bearing guide system
Adjustment screws
T-nut slots for mounting
Hardened guide with ground races
645
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
®
by
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
T-nut slots for fastening
DIMENSIONS (mm)
646
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
Y1
Y
Z
Y2
X
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
APPLICATION EXAMPLETwo-axis system with intermediate stop.The carrier of the Y axis is connected to the rail of the X axis with the LZK-013-2 mounting kit.
APPLICATION EXAMPLETwo-axis system, gantry style.The carrier of the Y axis is connected to the carrier of the Z axis with the LZK-013-1 mounting kit.
647
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
®
by
X
Z
Z
Y
Y
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
APPLICATION EXAMPLEPick & Place two-axis system.The carrier of the Z axis is connected to the rail of the Y axis with the LZK-013-2 mounting kit.
APPLICATION EXAMPLEThree-axis system.With two LLK-021 brackets, carriers can be connected on two perpendicular planes.
648
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
OPTIONAL KITS
649
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
®
by
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
LZK-001 (220 g)Carrier
LZK-002 (45 g)Mounting bracket for ISO 6432 cylinder Ø12 and Ø16
LZK-003 (25 g)Cylinder rod bolt M6 for ISO 6432 cylinders Ø12 and Ø16
LZK-004 (15 g)Steel plate
LZK-005 (135 g)Mounting kit for Origa rodless cylinders Ø16 (OSP-P16)
LZK-006 (70 g)Mounting kit for Origa rodless cylinders Ø10 (OSP-P10)
650
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
M5x12mm DIN912 INOX (x4)
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
LZK-007 (40 g)Threaded bracket (M12x1) for the side mounting of shock absorbers or end of stroke grub screws for ISO 6432 cylinders
LZK-008 (50 g)End plate
LZK-013 (290 g)Mounting interface
LZK-013-01 (30 g)Carrier-to-carrier mounting kit
LZK-013-02 (50 g)Carrier-to-rail mounting kit
FTK30 (25 g)Screw kit for LLK-021
651
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
®
by
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
LZK-013-03 (65 g)Rail-to-rail mounting kit
LZK-016 (20 g)M6 cylinder end block (1 piece)
FGD/FPDEnd of stroke
FGD0830 M8x1 L=30 mmFGD1030 M10x1 L=30 mmFGD1235 M12x1 L=35 mmFPD0830 M8x1 L=30 mmFPD1030 M10x1 L=30 mmFPD1235 M12x1 L=35 mm
TK10-4MB (16 g)Hydraulic shock absorber (M10x1)
MFM Nut (1 piece)
MFM-059 M5MFM-070 M4
LLK-021 (170 g)90° mounting bracket
M5x12 mm DIN 912 INOX
652
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
EXAMPLE Slide with 20mm piston bore (ISO 6432) and 50mm stroke.
ISO 6432 cylinder Ø12 (not supplied)
50 (stroke)
(140 + stroke)
653
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
®
by
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
ISO 6432 cylinder Ø16 (not supplied)
EXAMPLE Slide with 25mm piston bore (ISO 6432) and 100mm stroke, with hydraulic shock absorbers on the end plates.
Stroke
(140 + stroke)
654
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
EXAMPLE Slide with 32mm piston bore (ISO 6431) and 160mm stroke, with hydraulic shock absorbers on one side.
ISO 6432 cylinder Ø16 (not supplied)
(140 + stroke)
(Stroke)
655
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
®
by
OSP-P10 OSP-P16
A 61 mm 62 mm
B 32 mm 38 mm
C 19 mm 30 mm
D 35.5 mm 42 mm
Origa
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
Origa rodless cylinder Ø16 (not supplied)
EXAMPLE Pneumatic slide driven by a rodless cylinder, with hydraulic shock absorbers on the end plates.
Stroke
(175 + stroke)
656
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
CAUTIONNever let the gripper come into contact with corrosive substances, powders, or soldering or welding spatter as they will damage the slide.Never let non-authorized persons or objects be within the operating range of the slide.Never operate the slide on a machine that does not comply with the safety standards and laws of your country.
The safety screws should be removed only before operating the slide: they are necessary to prevent the carrier from coming out.The other screws, shown in the picture, must not be fastened or unfastened: they are used to adjust the recirculating ball bearing.
Keep the bearing guide clean.Periodically check it and lubricate when dry.The proper grease is available in 90 gram tubes; use part # GLP500-90.
657
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
®
by
max
Fx 100 N
Fz 100 N
Mx 10 Nm
My 5 Nm
Mz 10 Nm
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
SAFETY LOADSExcessive loads can damage the unit, cause malfunctions and endanger the safety of the operator.The load factor LF must be lower than 1.
658
01
/20
17
LZ
www.gimaticUSA.com • 216-535-4811
1
23
4
56789
LIN
EAR
GU
IDES
Re-circulating ball bearing linear guides
PARTS LIST
LZ
1 Aluminum profile ESTR-LZ... 1
2 Guide TRAF-LZ... 2
3 Carrier LZ12-03 3
4 Re-circulating ball bushing CZ334 4
5 Nut MFM-070 5
6 Bolt VITE-029 (M4x12mm DIN 912) 6
7 Elastic washer VITE-220 (4.3 UNI 1751-B) 7
8 Bolt VITE-302 (M3x10mm DIN 912) 8
9 Dowel pin VITE-273 (M4x5mm DIN 913) 9