GLF MRL - MC Green Lift Fluitronic GLF MRL - MC This lift benefits from an MRL–MC (machinery cabinet) situated on the landing rather than in the pit or machine room, this makes servicing safe and easy for the engineers. The installation remains simple as the programming of the controller can be done from the landing rather than within the shaft. Simple and Inexpensive • No machine room • Competitively priced with other MRL lifts on the market • Reduced maintenance costs and easily accessible spare parts • Quick and easy assembly and installation Safe • Access to hand pump, manual lowering button and controller diagnostics from outside the shaft • Emergency operation of manual lowering in a very short time by non- specialised but properly trained users GLF MRL - MC* (reduced pit and overhead) A Green Lift MRL with reduced pit and overhead requirements, ideal for installation in existing buildings Flexible •Reduced pit and overhead requirements compared to traditional lifts • Flexible machinery cabinet location, occupying only 0.3m², housing the controller and power unit Simple and Inexpensive • Low maintenance costs and easily accessible spare parts GLF MRL - MC with reduced pit and overhead option Green Lift Fluitronic *This lift conforms to Lift Directive 95/16/EC and is subject to the prescriptions of Annex I,art.2.2 of the said Directive and refers to EN 81.21 for installation in existing buildings.
Transcript
GLF MRL - MCGreen Lift Fluitronic
GLF MRL - MCThis lift benefits from an MRL–MC (machinery cabinet) situated on the landing rather than in the pit or machine room, this makes servicing safe and easy for the engineers. The installation remains simple as the programming of the controller can be done from the landing rather than within the shaft.
Notice: with fire-rated side opening landing doors add 30mm to the shaft width dimensions aboveMax car travel 17m
Standard Speed (m/s)
Standard speed for payloads up to 630kg (for other payloads call GMV Techincal Department)Up 0.40 0.52 0.62 0.86
Down 0.40 0.48*** 0.52 0.62*** 0.62 0.74*** 0.86 1.00***
* In compliance with EN 81.70 rules **These lift types are available only in the standard version (that means with Setronik 1 controller and 8700 car frame) and not in the “Fluitronic version” (with GMV 10 controller and Union frame) ***Possibility of downward speed different from upward speed only with electronic valve.
