Engineered SolutionsEngineered SolutionsEngineered Solutions

Hi-TechHi-TechHi-Tech

®

OXYGEN

www.hitechgas.com

Oxygen (O2) Info

Molar Mass 32 g/molDensity 1.14 kg/dm3Covalent Radius 66 pmNumber of Electrons 16Vapor Pressure 1.52 mbarMelting Point 54.4 KBoiling Point 90.2 K

GENERATION SYSTEMS

THE EXPERIENCE THE PROCESS THE SCOPE OF SUPPLY

Typical Process Flow Diagram for Oxygen Generator

12

3

4

5

6

7

8

9

10

Air CompressorPre FilterAir DrierAir StorageOil AbsorberPneumatic Air Tank Oxygen GeneratorVent Silencer Buffer TankStorage tank

1

2

3

4

5

6

7

8

9

10

Nomenclature

The production of gases with aid of adsorptiontechnology is based on capability of porous adsorption agents to bind gases individual co-nstituents of gas mixture are adsorbed to diffe-ring degrees on very large surfaces of the ads-orbent agents. This effect is used within a PSAto continuously separate out one constituent.Zeolite Sieves are used as adsorption agentswhen producing oxygen from the air by adsor-ptive means they adsorb nitrogen, water vaporand carbon dioxide to a much higher degree than oxygen this means that a product ow co-mprising essentially only Oxygen and Argon can be removed from the process air being passed through the adsorption bed.

Hi-Tech Engineered Solutions, one of world’s leader in Installing and Manufacturing of Turnkey based PSA (Pressure Swing Absorption) Technology Plants, also offers Custom Engi-neered PSA Oxygen Systems that are desi-gned to Specic Requirements of Installationwith capacities Ranging from 50 SCFH (1.0Nm3/hr) to 8,000 SCFH (210.00Nm3/hr) .

Hi-Tech’s high-efciency, rugged 2-bed PSA oxygen process design offers extremely low energy consumption, on-stream efciency of 99% V/V, easy operation, and long-term Plant life of 15 years or more under standard results.

Scope of supply mainly comprises of following Air Compressor Air Drier with Pre-Filters Absorber vessels with Pre-Piped Skid Specially Selected adsorbent material Oxygen Storage Tank Touchscreen Control system Oxygen product analyzer Interconnecting pipelines

Optional- Gas Booster up-to 200 Bars G Oxygen Filling Ramp Backup System Remote Control System

MODEL AIR CFM

93~95% OXYGEN STD. OUTLET PRESSURE

OUTLET PRESSURE WITH BOOSTER

TANK SIZE (Gallons)

POWER CONSUMED SCFH LPM Nm3/hr

O-50 12 50 24 1 50 PSI 3,000 PSI Max. 60 2 KW O-75 17 75 36 1.5 50 PSI 3,000 PSI Max. 60 2.5 KW O-100 22 100 47 3 50 PSI 3,000 PSI Max. 80 4 KW O-175 32 175 83 5 50 PSI 3,000 PSI Max. 120 6.5 KW O-250 45 250 118 7 50 PSI 3,000 PSI Max. 120 9 KW O-375 68 375 177 10 50 PSI 3,000 PSI Max. 120 13 KW O-500 88 500 236 13 50 PSI 3,000 PSI Max. 200 16.9 KW O-650 118 650 307 17 50 PSI 3,000 PSI Max. 400 22.1 KW O-750 133 750 354 20 50 PSI 3,000 PSI Max. 400 26 KW O-1000 175 1,000 472 26 50 PSI 3,000 PSI Max. 400 33.8 KW O-1250 225 1,250 590 33 50 PSI 3,000 PSI Max. 660 42.9 KW O-1500 320 1,500 708 39 50 PSI 3,000 PSI Max. 660 50.7 KW O-2000 425 2,000 943 53 50 PSI 3,000 PSI Max. 660 66 KW O-3000 625 3,000 1,415 79 50 PSI 3,000 PSI Max. 1,060 95 KW O-4000 830 4,000 1,890 105 50 PSI 3,000 PSI Max. 1,220 126 KW

-Optional 99% purity, Custom Built Models also Available Note- Specifications are subject to change without prior notice.

Engineered Solutions

Hi-Tech

®

With our Worldwide base of installated equipment, Hi-Tech EngineeredSolutions has the engineering and manufacturing experience to integratesuccessfully into Plants for Ozone, Oxygen, Nitrogen, Argon, Acetylene, Nitrous Oxide & Carbon di-oxide. Our sales and service Network is dedi-cated to keeping your Oxygen Generator in top notch condition throughout year. .

Hi-Tech Engineered Solutions Equipment Operating in over 50 Countries

www.hitechgas.com

General Features of Oxygen Generators Available-

ü Meets Worldwide Manufacturing Standards Cost Saving of up-to 80% from Liquid/Cylinder supply ü Dependable Highest Reliability with Energy Efficiency ü Compact design with Easy and Simple controls ü

ü Pre-piped systems for Easy and simple installation ü Automatic operation-one touch start up and shut downü Easily Partial Load Operation in variable Demand Flowsü Ready to use upon deliveryü Touchscreen Control Panel ü Optional Remote Control or GSM Interface ü Easy to maintain with Continuously monitored Purity & Flowü Optional Cylinder filling Ramp with Emergency Disaster Recovery

Oxygen Generator with Cylinder Filling Booster

Oxygen Generator with Oxygen Storage Tank

Plant Unique features-

1. Completely Pre-Piped & Skid Mounted.

2. Containerized Shipments right from factory.

3. Critical process parameters monitored and recorded every

500 milliseconds.

4. Automatic turndown capability from 100% to 0% ow capacity.

5. Designed in accordance with local standards.

6. Automatic and unattended operation.

7. On-site start-up assistance by Hi-Tech’s Engineered

Solutions technicians anywhere in the

World.

3Our Generators Provides from 1 to 105 Nm /hr of Oxygen. Use the following Table to determine which model is most suitable to your application.

A Full Line of Oxygen Generators Available

Atlas Copco Make Screw Compressor

Process Skid Kaeser MakeScrew Compressor

OG

/7-1

5 R

ev-

1.2

Hi-Tech Gas Equipment & Hardware262 KM Stone, National Highway-1, Mandi Gobindgarh-147 301, PunjabIndia +91-1765-500999 +1-302-996-5818 www.hitechgas.com sales@hitechgas.com

WORLDWIDE LOCATION

Hi-Tech North America LLC1408, Old Capital Trail, # 554Wilmington, DE- 19808United States of America +1-302-298-1374 +1-302-996-5818 www.hitechgas.us sales@hitechgas.us

NORTH AMERICA LOCATION YOUR LOCAL CONTACT