HilcoTM

Industrial WEBCAST AUCTION

Bid online with:

Sale held in partnership with:

www.hilcoind.com

www.aaronequipment.com

www.perryvidex.com

Hilco™

Industrial

Extraordinary Offering of Late Model, Never Used

Chemical Processing,

Thursday, December 8TH • 9:00 AM MT Magna, Utah USA

Assets No Longer Required to the Ongoing Operations of

Power Generation & Electrical Distribution Equipment

From Complete Molybdenum Processing Plant

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2

TURBINE GENERATOR • CRYSTALLIZER SYSTEMS

TURBINE GENERATOR1 – SOLAR #T70 6.4 MW TURBINE GENERATOR WITH CLEAVER-

BROOKS (3094-BO-002) BOILER, 250 PSIG, Capacity 23,019 Sq Ft, 60,000 lb/hr, TIC MFG#: EK-4101. 200-HP Blower Twin City Fan & Blower, Boiler Silencer, Condensate Tank, Eco Inc. Heat Recovery Economizer S/N: J-1260 150 psi @ 650° F

CRYSTALLIZER SYSTEMS1 – SWENSON SINGLE EFFECT FORCED CIRCULATING

CRYSTALLIZER SYSTEM WITH THERMAL VAPOR RECOMPRESSION, Refined ADM Crystallizer, Mason Manufacturing 2 Pass Shell & Tube Heat Exchangers - 12000 & 7000 Sq Ft, ITT Goulds #AF Axial Flow Pump, 150-HP Motor, Croll-Reynolds #S-15-T Steam Jet Evactor Thermocompressor, Sulzer #APT 11-1A Feed Pump, Sulzer #CPT22-1-LF Centrate Pump, Weir Slurry Pump, Mark Steel 690 Gallon Condensate Tank, ADM Desuperheater

1 – SWENSON RHENIUM CRYSTALLIZER SYSTEM, S/N 11-581, Mason Manufacturing Crystallizer, Approx 24” D x 96” Straight Side, Mason Manufacturing 2 Pass Shell & Tube Heat Exchanger, Mason Manufacturing 4 Pass Shell & Tube Heat Exchanger, ITT Circulating Size 1.5x3-6 Pump, S/N 779F374, Busch #NC0100.BM06.XXVA Vacuum Pump, Industrial Filter Demister Pot

2011

2011

Preview: December 6th - 7th

Appointment Strongly EncouragedPPE Required at All Times

Contact Ken Planet +1 248-419-1964, kplanet@hilcoglobal.com

CENTRIFUGES • AUTOCLAVE • TURBO DRYERS • PRESSURE FILTERS

For more information, please visit us on the web at www.hilcoind.com/sale/RioTinto 3

CENTRIFUGES1 – SIEBTECHNIK TEMA TSDT 600 EK TURBO SCREEN DECANTER TUBE SOLID

BOWL CENTRIFUGE, S/N 6210, Max Bowl Speed 2900 RPM, Bowl Dia 600MM, 125-HP & 60-HP Motors

1 – SIEBTECHNIK TEMA SHS 502 PUSHER CENTRIFUGE, S/N 6211, 316 SS Contact Areas, 25-HP Drum, 10-HP Pusher

AUTOCLAVE1 – EATON METAL PRODUCTS AUTOCLAVE, S/N 163, Approx 118,600 Gallon, CS,

Approx 188” Diameter x 920” Straight Side, Internal Rated 500 psi at -20° to 470° F, Lined with an Acid Resistant Brick with Acidsil Z & Glysil 90 Mortar, NB# 164, Caldera Engineering Valves

TURBO DRYERS2 – WYSSMONT #O-26 TURBO-DRYERS, 316L SS, Approx 12.5 Dia x 18’ H, Approx

Capacity 7800 pounds per hour, (26) Trays

PRESSURE FILTERS1 – OUTOTEC LAROX M SERIES TYPE PF 4.7-12.6 M1.6-2-45 AUTOMATIC PRESSURE

FILTER, S/N PF1005, 316L SS, Filtration Area 50.6 Sq Ft (Expandable to 135.6 SF), Hydraulic Power Unit, Water Station System

2 – QPEC QUINN PROCESS EQUIPMENT COMPANY BATCH 12” PRESSURE FILTERS, S/Ns Q-168-3030, NA, 316 Stainless Steel, Approx 12” Dia x 24” D Chamber

2011

2011

FILTER PRESSES • LEAF FILTERS • SPARKLER FILTERS ROTARY KILNS • THERMASCREW PROCESSORS

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4

FILTER PRESSES4 - OUTOTEC SS LAROX #PF48 VERTICAL FILTER PRESSES, Type: PF 72/96 M48 2 33,

S/Ns 1003, 1004, 1018 & 1019, Mccord Belt Conveyors with (2) SS Poly Lined Hoppers2 – DELKOR FILTER PRESSES, 1500mm x 1500mm Polypropylene Plates, Hydraulic Power

Unit, Single Ram, Center Feed, Four Corner Discharge, Side Plate Shifter, Approx 3123 SF Filter Area

1 – ISHIGAKI 1500MM FILTER PRESS, Type MCFGC, S/N ML0151, Nominal Size 1500x64/78, Filter Area 3.9/4.8 Sq M, Filter Capacity 252/283 L

1 – MICRONICS ENGINEERED FILTRATION FILTER PRESS, S/N 67456, (27) 1000mm Polypropylene Plates, (1) Head, (1) Tail, 23.62 Cu Ft Cake Capacity, 499.89 Sq Ft Filter Area, Plate Shifter

HORIZONTAL TANK VERTICAL LEAF FILTERS2 – SPARKLER FILTERS INC. #MCRO-800WCD HORIZONTAL TANK VERTICAL LEAF

FILTERS, S/Ns 23932 & 23933, Filtration Area 800 SF, Cake Cap 66.7 Cu. Ft, Wet Cake Discharge, NB# 3170

SPARKLER FILTERS1 – SPARKLER FILTERS INC. #MCRO600 HORIZONTAL CS SPARKLER FILTER, S/N 23931,

150PSI @ 350° F, NB# 31651 – SPARKLER FILTERS INC. #MCRO500 HORIZONTAL SS SPARKLER FILTER,

S/N 23920, 150PSI @ 350° F

ROTARY KILNS1 – LOCHHEAD-HAGGERTY GAS FIRED CALCINING ROTARY KILN, 316L Stainless

Steel, Tube Approx 72” Dia x 720” L with Internal Flights, Rated 800° F1 – LOCHHEAD-HAGGERTY GAS FIRED RE-OXIDIZER ROTARY KILN, S/N 20010, 316L

SS, Tube Approx 72” Dia x 480” L with Internal Flights, Rated 1050° F, 20-HP Motor

THERMASCREW PROCESSORS1 – BEPEX RIETZ #TJ-24-K3324 THERMASCREW PROCESSOR, S/N 2010042150B,

304 SS, 24” Dia x 288” L x Cored Screw Rated 90 psi at 500° F1 – BEPEX RIETZ #TJ-16-K3312 THERMASCREW PROCESSOR, S/N 2010042150A,

304 SS, 16” Dia x 144” L x Cored Screw Rated 90 psi at 300° F

ROLLER PRESS BRIQUETTERS2 – KR KOMAREK #B4000C ROLLER PRESS BRIQUETTER/COMPACTORS, S/Ns 5516C

& 5516B, (2) 18” Dia x 6” Face Rolls with 1.25” x 125” x 3/4” Pockets, 75-HP & 50-HP

2011

2012

2011

REVERSE OSMOSIS UNITS • STEAM GENERATOR • TURBULIZER RIBBON BLENDER • SLAKING SYSTEM • CAGE MILL

For more information, please visit us on the web at www.hilcoind.com/sale/RioTinto 5

REVERSE OSMOSIS UNITS3 – WATER & POWER TECHNOLOGIES SINGLE PASS REVERSE OSMOSIS UNITS (2008), Array Configuration 12:6, Each

Membrane Rated 600 psi at 20-190° F, Feed Flow 667 GPM, Concentrate Flow 167 GPM, (1) Boost Pump Type Goulds 3196, 125-HP Motor

1 – BACKWASH CARTRIDGE FILTER SKID w/ (2) Filters, Retention Tank, RO Backwash Pump Skid, 10-HP Motors

CONTINUOUS FLOW DRYER/COOLER1 – BUHLER AEROGLIDE NATURAL GAS SINGLE PASS CONTINUOUS FLOW (2) ZONE CONVEYOR DRYER/COOLER,

Model C1 96-38 RGC, S/N 11027-02, Approx 8’ W x 38’ L, 4 Tons per hour, #FOHB-8 Hydraulic Oscillating Feeder, Oper-ating Temp 400° F, Nat Gas (1,155 BTU/scf at 30 psig, 2,000,000 BTU/hr)

STEAM GENERATOR1 – CLAYTON INDUSTRIES E SERIES #DG-704-5-FMB STEAM GENERATOR WITH FIBER METAL BURNER, S/N 24977,

Boiler 700-HP, Max Heat Input Gas 28,205,000 BTU/hr, Clayton De-Aerator System

RIBBON BLENDER1 – BEPEX #IMXXS-300 DOUBLE SPIRAL RIBBON BLENDER, S/N 2011042986B, 300 Cu. Ft, Non-Jacketed Trough

60” W x 183” L, 125-HP

TURBULIZER1 – BEPEX #TS-14 TURBULIZER, S/N 2011042986A, Chamber 14” Dia x 42” L, 50-HP

MIXING DISPENSING SYSTEM1 – BEPEX MIXING DISPENSING SYSTEM, 470 Gallon 304 SS Tand, 48” D x 60” Straight Side, Pumps & Agitator, Frame Mounted

SLAKING SYSTEM1 – STANCO VERTIMILL LIME SLAKING SYSTEM

SCREENER1 – ROTEX #R3221A MMMM SCREENER, S/N SO22822, 40” W x 56” L Single Deck, Screen Area 15.6 Sq Ft

CAGE MILL1 – STEDMAN H SERIES #H-40H10-47X CAGE MILL, S/N D-3592 (2013) Approx. Capacity 4.4 Tons/Hour at 1/16” Feed Size,

75-HP & 50-HP Motors

VIBRATORY HOPPER & FEEDERS2 – 3 SIGMA 15 CU. FT VIBRATORY HOPPER/FEEDERS, S/Ns 4109 & 41101 – EGM DRY POLYMER FEED SYSTEM, Anionic Flocculent Hoist, Crane, SS Shaker, Auger Feeder

COMPACTOR FEED BINS12 – HALVERSON COMPACTOR FEED BINS - #SB1015 / SB86.75 / SB832 / SB812 / SB5.254 / SB66.5; Sizes to 8’ D x 12’

Straight Side (70°) Coned Bottom

CLOSED TUBE DRAG CONVEYORS18 – HAPMAN CLOSED TUBE DRAG CONVEYORS, Sizes Include: 4” W x 123’ L / 4” x 188’ / 6” x 115’ to 6” x 230’ / 10” x

110’ to 10” x 260’ / 12” x 176’, Capacities to 50 Tons/Hour, Sizes to 30-HP

2008 2011

20122013

SCREW CONVEYORS • AIR COMPRESSORS • HEAT EXCHANGERS ELEVATOR • COOLING TOWER • MATERIAL STORAGE SILOS

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)6

SCREW CONVEYORSQUANTITY OF ORTHMAN SCREW CONVEYORS, Including: Stainless Steel & Carbon Steel: Sizes Include: 6” D x 113” L / 6” x 149” / 12” x 129” / 12” x 135” / 12” x 151” / 12” x 273” / 12” x 430” / 14” x 112”, Capacities Include 0-0.5 Tons/Hour to 6 Tons/Hour

BELT CONVEYOR1 – MCCORD CONVEYOR SYSTEMS BELT CONVEYOR, Approx 36” W x 23’ L

BULK BAG UNLOADERS4 – FORMPAK #500HT BULK BAG UNLOADERS, Approx 48” L x 66” W x

237” H-Frame, 2-Ton Harrington Electric Hoist, Vibrating Pan, Supply Bin, SS Volumetric Screw Feeder

AIR COMPRESSORS & DRYERS5 – SULLAIR #TS32S 400 WC WATER COOLED INDUSTRIAL ROTARY SCREW

AIR COMPRESSORS, Rated 1681 CFM, 150 psi, Gear Driven, 410 bhp, 460 volts, Supervisor Controller

2 – CORKEN I-SERIES #T891GM9GBANSCN OIL FREE GAS COMPRESSORS, S/Ns 84649KD & 84650KD, 50-HP

3 – SULLAIR #DBP-3500 DESICCANT BLOWER PURGE DRYERS, S/Ns BPJGBA042, -043 & -044, Rated Flow 3500 cfm, Design Pressure 150 psi, Sullair Filter Skid

3 – SILVAN INDUSTRIES ASME PRESSURE AIR RECEIVER TANKS, S/Ns 715796 & 715797, Capacity 5335 Gallon, CS, Approx 120” Dia x 89”

4 – SILVAN INDUSTRIES PRESSURE AIR RECEIVER TANKS, Capacity 6338 Gallon2 – SILVAN IND INC CS AIR RECEIVER TANKS, 300 psi @ 450° F

ELEVATOR1 – PFLOW SERIES M ELEVATOR, Approx 5,000 LB Capacity, Size 160” D x 120” W x 33’10” T (3 Stories Tall)

STRIPPER COLUMNS1 – MARK STEEL CORPORATION AMMONIA STRIPPER COLUMN, S/N 39319-4, Carbon Steel, 42” Dia x 93’ Straight

Side, Dished Top & Bottom, Internal Rated 50 psi at -20 to 400° F, Skirt Mounted S/N 39319-43 – MARK STEEL CORP AMMONIA STRIPPER COLUMNS, CS, 42” Dia x 93’ Straight Side / 36” Dia x 81’ Straight Side2 – MARK STEEL CORP AMMONIA ABSORBER COLUMNS, S/Ns 39319-1, NA, CS, 60” Dia x 35’ Straight Side /

36” Dia x 40’ Straight Side

TEMPERED WATER STATION1 – HAWS #8780.25.31.60 SKID MOUNTED TEMPERED WATER STATION, Lochinvak 90kw 400 Gallon Water Heater,

Amtrol 90 Gallon Expansion Tank

COOLING TOWER1 – CCS COMPOSITE COOLING SOLUTIONS PHOENIX FIBERGLASS STRUCTURE COUNTERFLOW COOLING

TOWER, S/N CCS-1368-FM Capacity 6,512 Tons, (4) Cells ea Approx 26’ L x 26’ W, 75-HP, Approx 412,552 acfm

MATERIAL STORAGE SILOS1 – HALVERSON #SB2330 SILO, S/N 11044-1, Capacity 14,680 Cu Ft, SC, Approx 276” Dia x 363” Straight Side x 235”

Cone Bottom2 – HALVERSON SILOS, S/Ns 11044-108 & 11044-110, Capacity 11,302 Cubic Feet, CS, 14’ Dia x 86’3” H, Valve &

Rotary Valve 1 – HALVERSON SILO, S/N 11044-109, Capacity 8903 Cu Ft, CS, 14’ Dia x 56’3” H, Valve and Rotary Valve

HEAT EXCHANGERS 1 – APV PARAFLOW #N35 M-11 PLATE HEAT EXCHANGER, S/N G2010000828, 440.8 Square Feet, 316 SS

Plates, CS Expandable Frame2 – APV PARAFLOW #N35 M-11 PLATE HEAT EXCHANGERS, S/Ns G2010000824 & G2010000825, 335.5

Square Feet, 316 SS Plates, CS Expandable Frame2 – APV PARAFLOW PLATE HEAT EXCHANGERS, S/Ns G2010000826 & G2010000827, 120.6 Sq Ft, Model

N35 M-11. 316 Stainless Steel Plates, CS Expandable Frame, Air Receiver Tanks

STAINLESS & CARBON STEEL TANKS • SCRUBBER SYSTEMSFILTRATE TANK • SETTLER TANKS • MIX TANKS • SCRUBBERS

For more information, please visit us on the web at www.hilcoind.com/sale/RioTinto 7

STAINLESS & CARBON STEEL TANKS6 – MWF MIDWESTERN FABRICATORS HETRON 992 FR VINYL ESTER RESIN STORAGE

TANKS, Capacity 375 Gallon to 14,000 Gallon, Sizes 48” Dia to 168” Dia, Available with Lightnin Agitators

8 – GREAT BASIN INDUSTRIAL 316 STAINLESS STEEL TANKS, Capacity 8,812 Gallon to 150, 668 Gallon, Sizes to 17’ to 25’ Dia, Available with Motors & Lightnin Agitators

21 – ST. GEORGE STAINLESS STEEL TANKS, Capacity 2,015 Gallon to 19,829 Gallon, Sizes 72” Dia to 180” Dia, Available with Lightnin Agitators

4 – MARK STEEL STAINLESS STEEL PRESSURE TANKS, Capacity 450 Gallon / 800 Gallon / 6700 Gallon, Sizes 48” Dia x 96” & 96” Dia x 184”, 16,121 Gallon Duplex Tank

1 – TI-TITANIUM PRESSURE TANK, S/N C2892; Approx 2000 Gallon, SB265-2 Titanium15 – ST. GEORGE CARBON STEEL TANKS, Capacity 375 Gallon to 18,420 Gallon, Sizes

48” Dia to 168” Dia, Available with Lightnin Agitators6 – MARK STEEL CARBON STEEL PRESSURE TANKS, Capacity 100 Gallon to 2300 Gallon,

Sizes 36” Dia x 80” to 48” Dia x 96”1 – MARK STEEL CARBON STEEL CONDENSATE TANK, S/N 39189-8, Capacity 690 Gallon,

Internal rated 150 psi at -20 to 500° F, NB# 21501 – GREAT BASIN INDUSTRIAL CARBON STEEL THICKENER TANK, Capacity 243,043

Gallon Westech Rake Thickener Agitator, Approx 56’ Dia x 21’ 9” H25 – MIDWEST FABRICATORS FIBERGLASS TANKS, Capacity 200 Gallon to 19,800 Gallon,

Sizes 5’ Dia to 13’ Dia4 – POLYPROCESSING POLY TANKS, Capacity 904 Gallons, 2000 Gallon & 5050 Gallon,

Vertical Type, Sizes 64” Dia x 66” / 85” Dia x 97” / 94” Dia x 173”QUANTITY OF St. George Carbon Steel Tanks, Capacity 260 Gallon to 309,636 Gallon, Sizes 36” Dia to 32’ Dia, Available with Motors up to 100-HP & Lightnin Agitators

FILTRATE TANK1 – DELKOR APPROX 1300 GALLON CAPACITY FILTRATE TANK, Carbon Steel,

Approx Dia 72” x 76” Straight Side, (2) Carver SS Pumps & 15-HP Motors

SETTLER TANKS5 – MIDWEST FABRICATORS FIBERGLASS SETTLER TANKS, Capacity 22,000

Gallon, Approx 42’ L x 20’ W x 42” Deep1 – WESTECH CARBON STEEL 20’ DIAMETER SETTLER TANK, Rake Agitation1 – GREAT BASIN INDUSTRIAL CARBON STEEL SETTLER TANK, Capacity

8,812 Gallon

MIX TANKS2 – WESTECH MIX TANKS, Capacity 70 Gallon, 316L SS, 24” Dia x 36” Straight

Side, Flat Top & Bottom, Mixtec 1/4-HP Agitator

SCRUBBER SYSTEMS1 – MIKROPUL VENTURI SCRUBBER SYSTEM, S/N 1100841, MikroPul First

Stage Scrubber, Approx 96” Dia x 30’9” H, MikroPul Second Stage Scrubber, Schutte & Koerting 48” Barometric Condenser

1 – DUCON SX SCRUBBER, Ducon SX Fiberglass Scrubber, Size 18, #PRVS-160 M.K. Plastics Blower, (2) Aardvark 316 SS Centrifugal Pumps

1 – DUCON FIBERGLASS SCRUBBER, Size 48, 6000 AFCM

SCRUBBERS1 – SCHUTTE & KOERTING PACKED TOWER SCRUBBER, S/N 1201816, 316L

SS, Bed Height 24” x 16’1 – AFC FIBERGLASS SCRUBBER1 – DUCON FIBERGLASS SCRUBBER

HUGE INVENTORY OF UNUSED ELECTRICAL DISTRIBUTION EQUIPMENT

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)8

HUGE INVENTORY OF UNUSED ELECTRICAL DISTRIBUTION EQUIPMENT1 – INTERMOUNTAIN ELECTRICS MEDIUM VOLTAGE SWITCHGEAR

HOUSE, 15kv, 12000 Amp ABB SafeGear 14-Section Arc Resistant Switchgear (S/N 1VALCS01383A01), Back Up Battery System, Approx. 14’ x 60’ Climate Controlled Building

1 – INTERMOUNTAIN ELECTRICS SWITCHGEAR HOUSE - 3-Section Siemens WL Arc Resistant Switchgear, (2) Allen Bradley Centerline 2100 600 Volt Motor Control Centers, (2) Transformers

1 – ABB #SAFEGEAR 5-SECTION 1200 AMP SWITCHGEAR, 13.8 kV3 – SIEMENS #WL 7-SECTION 5000 AMP ARC RESISTANT

SWITCHGEARS, 480 V1 – ABB #F5EE147F6K – 1500/1680 KVA THREE PHASE DISTRIBUTION

TRANSFORMER, Class KNAN, High Voltage 13800, Low Voltage 480Y/277

1 – ABB #F5EE777J6W – 750/840 KVA THREE PHASE DISTRIBUTION TRANSFORMER, Class KNAN, High Voltage 13800, Low Voltage 480Y/277

6 – ABB #F5EE297DNG - 3000/3360/3750/4200 KVA THREE PHASE DISTRIBUTION TRANSFORMERS, Class KNAN/KNAF, High

Voltage 13800, Low Voltage 480Y/277(SOLD) OVER 400 ABB CENTERLINE 2100 MCC BUCKETS – Units from 5-Section to 22 Section, 600 Volt Capacity, 1200 Amp H / 300 Amp V – Some Never Installed QUANTITY OF 24 – TCI H5 Active Line Conditioners, Capacity 50 Amp to 225 Amp, 480 Volt

20122011

2012

HUGE INVENTORY OF UNINSTALLED & INSTALLED PUMPS & VALVES

For more information, please visit us on the web at www.hilcoind.com/sale/RioTinto 9

HUGE INVENTORY INSTALLED PUMPS & VALVES See online lot catalog for updated information1 – SULZER MODEL MBN50-215/04 MULTI RING SECTION PUMP, Stainless

Steel CA6NM, Rated 349 GPM at 1067’ Head at 3575 RPM, 150-HP Motor 2 – SULZER MODEL CPT33-6 CHEMICAL CENTRIFUGAL PUMPS, Rated

2818 GPM at 200’ Head, 200-HP Motor2 – WEIR FLOWAY TYPE VTP, SIZE 16 DKH 2-STAGE VERTICAL TURBINE

PUMPS, Rated 4020 GPM at 145’ Head, 200-HP Motor4 – FLOWROX #LPP-T25BS10-6-0-D PERISTALTIC HOSE PUMPS, Approx

Capacity 2.2 CMH, 0.28 LPR, 2-HP Motor5 – HYDRA-CELL #P600NSGSSB07H PUMPS, 316 Stainless Steel, 3-HP Motor 1 – WARMAN #032CAHCCCPM CENTRIFUGAL SLURRY PUMP, CS, Rated

370 GPM at 180’ Head, 40-HP Motor3 – FLOWSERVE 6FRBH142 CENTRIFUGAL PUMPS, CS, Rated 1567.50

GPM at 176.20’ TDH at 1780 RPM, 125-HP Motor2 – FLOWSERVE DURCO MARK 3 CENTRIFUGAL PUMPS, Size 2K3X2-

10ARV/9.50, CS, Rated 187 GPM at 86.7’ TDH, 10-HP Motor

PUMPS See online lot catalog for updated informationQUANTITY OF PUMPS, Including: Centrifugal Pumps – Sulzer #CPT22-1-LF Chemical Centrifugal Pump, 25-HP (2) Sulzer Ahlstar #APT11-1A , APT11-1B & APT11-2, 15-HP, (2) Sulzer #CPT22-1-LF Chemical Centrifugal Pumps, 3-HP, (2) Sulzer Ahlstar #APT32-4C Centrifugal Pumps, 15-HP, (2) Sulzer Ahlstar #APT22-3 Centrifugal Pumps, 125-HP; Abel Hydraulic Membrane Pumps; Flowserve Vertical Turbine Pumps to 200-HP; Gould Axial Flow Pumps – 40-HP to 150-HP; Warman Vertical Pumps - 7.5-HP to 125-HP; Warco Torque Flow Pumps – Warco; Wilfley Slurry Pumps; Lobeline Rotary Lobe Pumps; Magnetex & Innomag Drive Pumps – 1-HP to 20-HP; Chemical Process Pumps – Durco 5-HP to 30-HP; Metering Pumps – Milton Roy & Hydra Cell; Peristalic Pumps – Flowrox 1-HP to 10-HP; Diaphragm Pumps – Ingersoll RandOVER 100 CENTRIFUGAL PUMPS – Sulzer to 200-HP; Warman; ITT Goulds; Magnetex; Flow Serve

VALVES See online lot catalog for updated informationQUANTITY OF VALVES, Including: (Over 20) Soldo Air Actuated Valves – Sizes 2” to 6”; (Over 30) Triac Air Actuated Valves – Sizes 3” to 6”; (Over 75) Flowserve – Sizes 1.5” to 8”; (Over 2000) Manual Gate Valves – including Gate/Ball/Butter-fly Type - Including Clarkson #KGD2-RM Slurry Knife Gate Valves from 2” to 24”; Pure Flex 400 Series Ball Valves; KSB Isoria Valves – Sizes 3”/4”/6”/8”/10”/12”/1 4”/16”/18”/20”/30”; Crane Flowseal Class 150 Butterfly Valves; Walworth Globe & Check Valves – Size 16”; Crane Globe Valves – Sizes 12”/14”/16”

Full Lot Catalog Available at www.hilcoind.com/sale/RioTinto

Some Pumps, Valves, Flow Meters & Sensors have been pre-sold (See online lot catalog for updated information)

HEAT EXCHANGERS • BLOWERS • DUST COLLECTORS • AGITATORSLAB EQUIPMENT • SUPPORT EQUIPMENT

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)10

HEAT EXCHANGERS3 – KOCH HAIRPIN U TUBE SHELL & TUBE HEAT EXCHANGERS, #16240-MTB-AAB -

1362 Sq Ft; # 12240-MTB-AAB - 870 Sq Ft; # 06120 MTB-AAB - 88.43 Sq Ft8 – HEAT TRANSFER EQUIPMENT U TUBE SHELL & TUBE HEAT EXCHANGERS, Type

AEU; 4067 Sq Ft – Size 44-240; 1784 Sq Ft - Size 28-216, 1194 Sq Ft - Size 23-216; 879 Sq Ft - Size 19-240; 653 Sq Ft - Size 12-168; 396 Sq Ft – Size 15-216, 210 Sq Ft - Size 23-108

1 – APV PARAFLOW #V017 M-10 GASKETED PLATE HEAT EXCHANGER, S/N G2011001067, 31.9 Sq Ft, (19) Titanium Plates

1 – HEAT EXCHANGE APPLIED TECHNOLOGY #5W-11L-248F FIN FAN HEAT EXCHANGER, S/N H11188-A, 2111 Square Feet, 316 Stainless Steel Tubes

BLOWERS2 – INGERSOLL RAND SFB SERIES PRESSURE BLOWER PACKAGES, Model SNH-801,

S/N 90210439, NA, 10-HP3 – MK PLASTICS #DHK3000 & #DHK2225 BLOWERS, 5880 CFM, 20-HP & 15-HP3 – GREENHECK AIR HANDLERS, #RV-50-17.5, #RF-35-5.0 & #RV-30-5.0QUANTITY OF Greenheck PVG100 Rooftop Ventilators

DUST COLLECTORS2 – CAMCORP #CA36-3D & #CA36-3D CARTRIDGE TYPE DUST COLLECTORS, Capacity

11,700 Square Feet, CS Air Volume 19,500 ACFM, 50-HP & 15-HP Blower Motor2 – SPENCER TURBINE #G-50400H MOD 100-HP BLOWERS, S/Ns 814940, NA, Spencer

Turbine 50” 4 BRG Outboard Gas Booster, Rated 9764 ICFM, 400-HP Motor1 – KREBS FLSMIDTH RADIAL INLINE MANIFOLD CYCLONE SYSTEM, Model R1503-KC

AGITATORSQUANTITY OF Lightnin #17Q20, #15Q5, #15Q5, #14Q2, #14Q1 Agitators, Motors 1-HP to 20-HPQUANTITY OF Hayward Gordon #HRFX-10-614 & HRFX-10-612 Agitators, Motors 1-HP & 3-HP

LABORATORY EQUIPMENT1 – AGILENT TECHNOLOGIES #725 ICP-OES SPECTROMETER1 – AGILENT TECHNOLOGIES #4100 MP-AES SPECTROMETER1 – AGILENT TECHNOLOGIES #4107 NITROGEN GENERATOR1 – LECO #S632 SULPHUR & CARBON ANALYZER1 – THERMAL SCIENTIFIC #SORVELL LEGEND XF LABORATORY CENTRIFUGE1 – THERMAL SCIENTIFIC HERATHERM OVEN1 – BLUE M #V01824HPC-22MFG VACUUM OVEN1 – SHEL LAB #FX28-2 FORCED AIR OVEN1 – DESPATCH #LBB2-12-1 LAB OVEN1 – METTLER TOLEDO T90 TITRATOR2 – METTLER TOLEDO PLATFORM SCALES1 – TYLER RX-30 ROTAP PRESS2 – LABORATORY FUME HOODS1 – KROHNE OPTIMASS 1000 S25 FLOWMETER

SUPPORT EQUIPMENT1 – AUTOMATIC DRUM LID PLACING/SEALING SYSTEM W/ FANUC #R2000 ROBOTS1 – PACKAGING SYSTEM WITH FANUC #M410iB ROBOTS1 – COUSINS #6100-45 –CTA STRETCH WRAP MACHINE6 – CONNEX 40’ STEEL STORAGE CONTAINERS INCLUDING CONTENTS: Pipe

Hardware & Electrical Components QUANTITY OF CRS Crane Systems 3 Ton, 5 Ton & 15 Ton Overhead Bridge CranesQUANTITY OF 2 Ton Harrington Electric Hoists & Yale Electric HoistsQUANTITY OF Fischer Pneumatic Control Valves, Pressure Relief Valves, Check Valves, Rotary Valves, Expansion Joints; Roller Conveyor, Filters, Blowers; Stainless Piping; Titanium PipingQUANTITY OF Steel Control Cabinets, Spools of Power Cable & Various Parts

SALE INFORMATION

For more information, please visit us on the web at www.hilcoind.com/sale/RioTinto 11

FURTHER INFORMATION• A 16% BUYER’S PREMIUM WILL BE CHARGED ON ALL ASSETS WHEN

PAYMENT IS MADE BY MEANS OF CASH, CASHIER’S CHECK, COMPANY CHECK (WITH BANK LETTER OF GUARANTEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE. AN 18% BUYER’S PREMIUM WILL BE CHARGED ON ALL ASSETS WHEN PAYMENT IS MADE BY CREDIT CARD (ACCEPTED FOR INVOICES OF $2000 OR LESS), OR WHEN PAYMENT IS RECEIVED AFTER 48 HOURS OF SALE CLOSE. AUCTION WILL BE CONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY.

• AS A CONDITION TO PURCHASE, BUYERS WILL BE REQUIRED TO EXECUTEAND RETURN A FORM ASSET PURCHASE AGREEMENT.

• A 6.85% SALES TAX WILL BE APPLIED AS REQUIRED. DOWNLOADSALES TAX RULES & EXEMPTION INFORMATION AT OUR WEBSITE:WWW.HILCOIND.COM/SALE/RIOTINTO

• REMOVAL AND LOADING BY APPOINTMENT ONLY.• LOADING OF ITEMS FROM THE WAREHOUSE AND YARD TO BE SCHEDULED

SEPARATELY FROM ITEMS INSTALLED THROUGHOUT THE FACILITY.• REMOVAL DEADLINE: TBD

Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our

website at www.hilcoind.com for any changes to date, sale process, terms and conditions and list of available assets.

MACHINERY & EQUIPMENTKEN PLANET +1 248-419-1964 • KPLANET@HILCOGLOBAL.COMPAYMENT INFORMATIONLESIA JOSEPH +1 616-328-6892 • LJOSEPH@HILCOGLOBAL.COMHILCO ACCOUNTS RECEIVABLE AT AR-GR@HILCOGLOBAL.COMCUSTOMER SERVICE+1 877-37-HILCO • +1 616-732-1800 • INFO@HILCOIND.COM

AUCTION DATEDECEMBER 8TH

9:00 AM MT AUCTION LOCATIONDOUBLETREE BY HILTON – SALT LAKE CITY AIRPORT 5151 WILEY POST WAY SALT LAKE CITY, UT 84116 USAPREVIEWDECEMBER 6TH – 7TH OR EARLIER BY APPOINTMENT NOTE: MAKE APPOINTMENT TO ALLOW SUFFICIENT PREVIEW TIME.• PERSONAL PROTECTIVE EQUIPMENT WILL BE REQUIRED

AT ALL TIMES AT THE RIO TINTO FACILITY. SPECIFICREQUIREMENTS ARE AS FOLLOWS: LONG SLEEVESHIRT/COAT & PANTS, STEEL TOE BOOTS (6” MIN HT)WITH CUT HEEL & LEATHER UPPERS, SAFETY GLASSES,HARD HAT, HIGH VISIBILITY VEST, GLOVES.

• USE OF CONTACT LENSES ON PROPERTY IS PROHIBITED.TO SCHEDULE AN INSPECTION, PLEASE CONTACTKEN PLANET AT +1 248-419-1964EMAIL KPLANET@HILCOGLOBAL.COMASSET LOCATIONHIGHWAY 201 AND HIGHWAY 202MAGNA, UT 84044 USA Bid Online at

WEBCAST AUCTIONAssets No Longer Required to the Ongoing Operations of

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

Hilco® IndustrialTerms of Sale

A 16% buyer’s premium will be charged on all assets when payment is made by means of cash, cashier’s check, company check (with bank letter of guarantee) or wire transfer within 48 hours of sale close. An 18% buyer’s premium will be charged on all assets when payment is made by credit card (accepted for invoices of $2000 or less), or when payment is received after 48 hours of sale close. Everything will be sold to the highest bidder for cash, in accordance with the Auctioneer’s customary “Terms of Sale”, copies of which will be posted on the premises of the sale and subject to additional terms announced the day of sale. All items will be sold “as is, where-is” without any warranties, expressed or implied. Although obtained from sources deemed reliable, the Auctioneer makes no warranty or guarantee to the accuracy of the information herein contained. Bidders are encouraged to thoroughly inspect the items on which they intend to bid prior to sale. Absolutely no items will be removed until the day after the conclusion of the sale and payment is made in full. Subject to additions, deletions and prior sale. For updated information, please visit our website at www.hilcoind.com for any changes to date, sale process, terms and conditions and list of available assets.Payment: INVOICES WILL BE EMAILED WITHIN 24 HOURS AFTER THE AUCTION CLOSES. Payment is to be made to Hilco Industrial, LLC. Payment Options: VISA, Mastercard Discover accepted – if invoice total is $2,000 or less; Wire Transfer; Certified Check; or Company Check (with Bank letter of guarantee – see sample letter below). All sales are subject to sales tax. Purchasers claiming exemptions from taxes must provide proof satisfactory to the Auctioneer of their entitlement to claim such exemptions. Please see complete terms and conditions on our website, www.hilcoind.com.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at the Auction of Rio Tinto Kennecott on December 8, 2016.

Hilco Industrial, LLC is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved Printed in USA • RIO4859 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions. A Hilco Global Company

Vested in your Success

Follow us on:

Hilco™

Industrial31555 W. Fourteen Mile Road, Suite 301Farmington Hills, MI 48334Ph: 248-254-9999Fx: 248-254-9995www.hilcoind.com

Forwarding Service Requested

HelpsWORKING FOR A BETTER TOMORROW

WEBCAST AUCTION

Thursday, December 8TH • 9:00 AM MT Magna, Utah USA

Extraordinary Offering of Late Model, Never Used Chemical Processing, Power Generation &

Electrical Distribution Equipment From Complete Molybdenum Processing Plant

Assets No Longer Required to the Ongoing Operations of