How to Use the EPM Connector to Visualize BPC Data via Dashboard Design (Aka Xcelsius) _...

09.09.13 How to Use the EPM Connector to Visualize BPC Data via Dashboard Design (aka Xcelsius) | planingandconsolidation

planingandconsolidation.wordpress.com/2013/07/03/how-to-use-the-epm-connector-to-visualize-bpc-data-via-dashboard-design-aka-xcelsius/ 1/13

planingandconsolidation SAP BPC, FC, Outlooksoft, Hyperion, HFM, EPM, BI, Konsolidierung,Planung

by Camille Pieumein SAP BO BI, SAP BO BI on BPCLeave a Comment

How to Use the EPM Connector to VisualizeBPC Data via Dashboard Design (aka Xcelsius)

This article explains the steps to visualize BPC data in a dashboard build using SAP DashboardDesign (formerly Xcelsius). It shows how to use the SAP BPC EPM-Add-In for Excel to build areport, and the SAP BPC EPM Connector to enhance the functionality of the dashboard.

The SAP BPC product version referred in this post is SAP BusinessObjects Planning andConsolidation 10.0, version for SAP NetWeaver.

1 Business Scenario

In this scenario, the business wants to view real-time data from their SAP Business Planning andConsolidation, version for SAP NetWeaver (BPC for NW) system via a dashboard created with the

SAP Dashboard Design tool (formerly called Xcelsius). Using a flash-based dashboard provides azero footprint solution for viewing critical data in real-time. The dashboard user would not needanything more than flash player to view the data. This type of data visualization is very attractive tohigh level decision makers in the enterprise.

2 Software Versions

The following software are required (only to build the dashboard. The versions mentioned here arethe one I used for this tutorial.):

1. SAP Dashboard Design SP06 Patch 012. SAP BPC 10 EPM Add-In SP14 Patch 023. EPM Connector of EPM Add-In, (add-On for Dashboard Design, located in the EPM Add-In

installation folder)

July 3, 2013

http://planingandconsolidation.wordpress.com/

http://planingandconsolidation.wordpress.com/2013/07/03/how-to-use-the-epm-connector-to-visualize-bpc-data-via-dashboard-design-aka-xcelsius/

http://planingandconsolidation.wordpress.com/author/biconsult/

http://planingandconsolidation.wordpress.com/category/sap-bo-bi/

http://planingandconsolidation.wordpress.com/category/sap-bo-bi/sap-bo-bi-on-bpc/

http://planingandconsolidation.wordpress.com/2013/07/03/how-to-use-the-epm-connector-to-visualize-bpc-data-via-dashboard-design-aka-xcelsius/#respond



4. SAP BPC 10 ODBO Client5. Microsoft Visual C++ 2005 SP1 Redistributable Package(x86)

For simply running and viewing the dashboard, only Flash Player is required.All software (except for the Microsoft Visual C++ component) can be downloaded from the SAPService Marketplace. It is suggested to always apply the latest support package for each softwarecomponent.

3 Steps to build you dashboard tovisualize the BPC data

1- In SAP Dashboard Design, create a new dashboard and click on the EPM tab in the Excel-Workspace

(http://planingandconsolidation.files.wordpress.com/2013/07/pic01.png)

2- Create a local connection to the BPC-server

Use the SAP BW OLE DB Provider as OLAP provider


http://planingandconsolidation.files.wordpress.com/2013/07/pic01.png




Enter the BPC-BW server name. Also, enter the BPC user and password. This is the same user andpassword that you would used to connect to BPC via the BPC Excel Client. Click “Next”.


Select the Environment/Infoprovider and click “Finish”.

(http://planingandconsolidation.files.wordpress.com/2013/07/pic03_2.png)


3- Log on to the BPC-server using the local connection you created

Select the newly created connection, and click “Ok”.


http://planingandconsolidation.files.wordpress.com/2013/07/pic03_2.png





Enter your credential for the connection to the server and click Log On


4- Create a new BPC-Report in the Excel-sheet

Click on “New Report” in the EPM tab of the excel workspace.


The “Report Editor” dialog will then be launched. Here you can configure the report output.

Drag and drop the ENTITY.PARENTH1 node from the cube dimensions box into the “Row” box.

Drag and drop the CATEGORY.PARENTH1 and the ACCOUNT.PARENTH1 nodes from the cubedimensions box into the “Column” box.






Drag and drop all remaining dimensions except TIME and PRODUCT from the cube dimensionsinto the Page Header box.

Note: The dimensions TIME AND PRODUCT will be configured in the dashboard as dynamicfilters.


For each dimension in the row and column box, select the members by clicking the checkboxes,then clicking the “Right-Arrow” key to move the selections into the “Selected Members” box. Thenclick “Ok”.


For each dimension in the “Page Header” box, select one or many members to define the context ofyour report


5- The report is then generated in the excel spreadsheet. The values are retrieved from the BPCsystem and statically stored in the excel sheet.







6- Before starting to build the layout of your dashboard, I recommend to prepare your excel sheetin order to facilitate your subsequent actions.

I’ll first recommend to copy a subset of the data returned by you report (actually those data youwant to show on your dashboard – for example the Top 10 entities) in a specific area on your sheet.

In the sheet, mark your different data area with different colors



The Excel EPM-functions (for example: EPMOlapMemberO()) are not supported in Dashboard.


So, also copy the columns and rows where those functions are used to your dashboard data area(actually, you don’t copy the formula but the content).








Note: Further on, you can set a data connection to the BPC server to update the value for these fields(see that in a later section: extra notes)

7- Next, you will begin to build the layout of the dashboard.

Drag and drop the components for your dashboard from the components section on the left into thelayout editor.


Map the components on the layout with the data on your sheet


8- When you are satisfied with the layout of your dashboard, in a next step, you will add a newconnection using the EPM Connector.







This connection will allow you to retrieve data from BPC at runtime, instead of getting the valuesstatically from the excel sheet.

9- In the appropriate cell, enter the command =GetReportDefinition() and hit enter.


This command retrieves the XML based definition of the BPC report and puts it in this cell. Lateryou will bind a property of the EPM connector to this cell.

10- Add a new connection to your dashboard

Call the data manager by clicking on “Data > Connections” in the main menu on by clicking on themanage connection button in the toolbar



Then Add a new connection based using the EPM Connector








11- Define and configure the connection

Give a meaningful name for this connection.

Next choose the EPM Application which you want to connect to. In this case, select “Planning andConsolidation, version for SAP NetWeaver platform”.

For the “Operation” field, select “EPM Report”.

In the “Input Details” section:

Next, enter the host name of the BPC web server. Enter both the host name and port.

Click the button next to “Report Definition” and bind it to the cell where the BPC Report definitionresides then click “OK”. The other information like Report Name, Environment, Models and alsothe “Result” field in the “Output Details” section should be filled automatically from the reportdefinition.

The finished connection configuration should now look like this. Notice that the cell range for theoutput has automatically been configured based on the EPM report definition. Click “Close”.






12- The model is now complete. You can test it out by clicking the “Preview” button.







4 Extra Notes

1-

You can configure your connection to refresh on load. This could be necessary if you do not like tohave the dashboard loaded initially with the static data used for the dashboard creation (which datacould have been updated and would then not reflect the real data in BPC).

For that, just check the “Refresh on Load” checkbox in the “Output Details” section of the EPMConnection configuration


2-

By copying the Label data in the report data area to avoid the unsupported EPM-Excel functions inDashboard Design, you make this area of data static for the dashboard, i.e.: if these data change(member name modified or deleted) in the BPC-System, these changes will not be reflected on thedashboard, which could conduct to inconsistency.






To avoid that, you can create a new EPM Connection to retrieve the dimension member and replacethe default one. This connection should then be refreshed the same time as the previous “dataRead”connection.

To define the connection:

First set the connection name and choose the EPM Application which you want to connect to. In thiscase, select “Planning and Consolidation, version for SAP NetWeaver platform”.

For the “Operation” field, select “Retrieve Dimension Members”.

In the “Input Details” section:

Next, enter the host name of the BPC web server. Enter both the host name and port.

Click the dropdown box next to “Data Source” and select “Retrieve”, the data source will then beretrieved according to the hostname and port you entered previously.

Repeat this action for the other fields (Environment, Models, and Member) and choose whennecessary the right value between the one shown by the retrieve operation.

You end up with a configuration similar to the one shown below.


In the “Output Details” section

Click on the button next to “Result” and bind this to the cells where you want dimension membersto be loaded on your sheet.

You can also select a cell where to put an eventual error message for the connection by clicking onthe button next to “Message” and binding this to a cell on the sheet.

You can choose the Connection to be refreshed on load (this is a good idea if you want to have thedashboard loaded with the real/right data, but this will make the dashboard to wait for the dataload before showing, which could be annoying if you do not have a high-performance connection to




the BPC Server).


About Camille Pieume

I currently work within the Reporting & Analytics team of Business & Decision in Germany,specialising in SAP BusinessObjects technologies including SAP BusinessObjects, SAP In Memorytechologies (HANA) , Mobile BI and Data Visualisation. I have a wealth of experience in the SAP BITechnologies from working in the Business Intelligence sector for many years now. Mostimportantly, I am Dad to 1 wonderful kid and Husband to an accommodating wife.View all posts by Camille Pieume »

planingandconsolidation

Blog at WordPress.com. The Skeptical Theme.


http://planingandconsolidation.wordpress.com/author/biconsult/

http://planingandconsolidation.wordpress.com/

http://wordpress.com/?ref=footer

http://theme.wordpress.com/themes/skeptical/

Date post:	25-Oct-2015
Category:	Documents
Upload:	vladislav-telepov
View:	126 times
Download:	6 times

How to Use the EPM Connector to Visualize BPC Data via Dashboard Design (Aka Xcelsius) _...

Documents