JMV, having an experience of more than a decade in Designing, Manufacturing & Installation of Maintenance Free Grounding & Bonding System, Exothermic Welding System, Lightning Protection System, Surge Protection Devices and Gel Based Cable Jointing Kit with its own manufacturing units in Delhi and NCR is equipped with its own advanced manufacturing process, mechanism and software to suit various requirements. Our  comprehensive range of solution meets the need of today's residential, commercial and industrial

electrical safety with utmost quality.  

Installation Steps of Cable Jointing Kit

Installation is very easy, extremely fast and does not require any special tool or skills:

1. Stripping the cable, remove the shield layer and foil.

2. Now separate the individual core again remove the foil of the individual core.

3. Join the ends of the individual core of the two cables using player.

4. Cable is prepared in the usual way and the separator is centered between the cores.

5. Now put the cable into the separator to create distance between the individual cores avoiding short circuit condition.

6. The connection is separate and healthy in position within the mold.

7. Fix the second half of the mold into the place for completing the joint.

8. The joint can now be safely submitted to any depth and subjected to the most extreme conditions.

Note:If it becomes necessary to modify or change the joint connector or configure the joint completely. It is a simple task to reopen the joint and make the changes in a clean and smooth way.

https://www.facebook.com/chemicalearthingsystem

https://www.youtube.com/channel/UCvZ5Xfard_30meyO0es-wSQ

https://www.linkedin.com/company/jmv-lps-limited

https://plus.google.com/u/0/+JmvCoInjmvlpslimited/about

Address:

W-50, Sector-11, Noida 201301Delhi NCR, India Phone Numbers(Hunting Number):+91 -120-4590000Email: info@jmv.co.inWebsite:http://www.jmv.co.in

Thank You for your Attention