Final Screw- .050/1.27 hex 19.081 19.081 19.081-P10 19.081-P10 14.056 14.095 14.096 14.095-P10 14.096-P10 17.017 17.018 Straight Titanium Abutment Price Single Unit 19.056 $13 $90 $13 $90 $39 $49 Titanium Healing Abutment 3mm 20.017/3 20.018/3 4mm 20.017/4 20.018/4 5mm 20.017/5 20.018/5 $24 15º 22.095 22.096 25º 23.096 23.095 $75 Page 1 of 13 10 Pack Single Unit INTERNAL HEX MI - Compatible with MIS ® Seven Implants YELLOW NARROW PURPLE STANDARD GREEN WIDE 13.095 13.096 Titanium Analog - For 3D Printed Models 2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface. Includes final screw. 30ncm torque. Alternative solution is use Zimmer compatible 3.5 and 4.5 platform components on page 10 and 11 and in the Zimmer compatible catalog. collar height 30ncm torque - Use .0501.27 MIS or DESS Driver- see page12 10 Pack Use same analog for both 3D printing and stone model 17.056 Impression Transfer Includes both open & closed tray screw 2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface. Includes final screw. 30ncm torque. Alternative solution is use Zimmer compatible 3.5 and 4.5 platform components on page 10 and 11 and in the Zimmer compatible catalog. Angled Titanium Abutment 3.30 3.75 / 4.2 5.0/6.0
INTERNAL HEX MI - Compatible with MIS® Seven Implants
YELLOW
NARROW
PURPLE
STANDARD
GREEN
WIDE
13.095 13.096
Titanium Analog - For 3D Printed Models
2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface. Includes final screw. 30ncm torque. Alternative solution is use Zimmer compatible 3.5 and 4.5 platform components on page 10 and 11 and in the Zimmer compatible catalog.
collar height
30ncm torque - Use .0501.27 MIS or DESS Driver- see page12
10 Pack
Use same analog for both 3D printing and stone model
17.056
Impression Transfer
Includes both open & closed tray screw
2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface. Includes final screw. 30ncm torque. Alternative solution is use Zimmer compatible 3.5 and 4.5 platform components on page 10 and 11 and in the Zimmer compatible catalog.
Angled Titanium Abutment
3.30 3.75 / 4.2 5.0/6.0
28.095 11.018-P10
29.056 29.09512.017-P10 12.018-P10
$27$90
$27
$90
30.095
$45
24.095
25.095
$31
All Plastic Castable Abutment
24.096
25.096
28.096
29.096
30.096
31.096
ø10mm 61.095 61.096 ø14mm 71.095 71.096
$38
$45
Premilled Abutment Blank
Titanium
$25
Page 2 of 13
Price
Titanium Temporary Abutment
Chrome Cobalt
$49
52.056PEEK
52.017 52.018
28.05611.017-P10
Diameter
Includes final screw part # 19.081 - torque is 30ncm
31.09530.056
31.056
Includes wax up sleeve and final screw - Narrow is part #19.056 and Standard/Wide is part #19.081. Torque is 30ncm.
E Engaging NE Non Engaging
Single Unit 10 Pack
Single Unit10 Pack
NE
ENE
E
ENE
ENE
Volume discounts available - Please contact us for details. Includes final screw - #19.081. 30 Ncm torque. Can also use Zimmer components
Desktop Scan Body - Round top
Includes final screw part # 19.081 - torque is 30ncm
YELLOW
NARROW
PURPLE
STANDARD
GREEN
WIDE3.30 3.75 / 4.2 5.0/6.0
Chrome Cobalt Abutment
Single unit includes final screw. 30Ncm torque.
50.056 50.017 50.018Screw
Sold seperately - Narrow is part #19.056 and Standard/Wide is part #19.081.
Intraoral Scan Body
$55Intra Oral Scan Body Driver
DTPEI
Hand driver for tightening and loosening of ALL DESS intraoral scan bodies (parts 52.xxx).
INTERNAL HEX MI - Compatible with MIS® Seven Implants
10 pack screw sold seperately
Titanium
Peek TitaniumTitanium
TitaniumA hard anodized matted surface ideal for scanning, made of titanium, autoclavable, and for multiple use. The top part has an embedded screw for correct positioning, flat top and triangle for accurate scanning. The bottom part has internal screw threads to ensure the screw correctly engages into the implant every time. 7.5mm height x 4mm width. The all PEEK scan body has same dimensions and characteristics as the titanium. Hand tighten or use IO scan body driver part DTPEI.
NP RP WPGREEN3.5
PURPLE4.5
YELLOW5.7
0.3mm 15.095 15.096
0.8mm 15.056
1.5mm 15.295 15.296
3.0 mm 15.395 15.3960.3mm 16.095 16.0960.8mm 16.0561.5mm 16.295 16.296
3.0 mm 16.395 16.396
$39
$50
5 Pack
Page 3 of 13
Straight Ti base
AngleBase® Ti Base - Vertical Walls for Maximum bond retention 36.017 36.018
Includes final screw - Narrow is part #19.056 and Standard/Wide is part #19.081 - torque is 30ncmVertical walls for maximum bond retention and presandblasted.
Price
Plastic sleeves for Straight Ti base
collar height
E
NENENENE
EEE
For custom restorations that are cemented to the tibase, not for direct castingE
NE
ENE
0º
10ºPack of 5
Pack of 5
Pack of 5 20º
$5033.100-P533.101-P5
33.102-P5
33.100-P533.101-P5
33.102-P5NENE
NE
DT20TB06 DT24TB06 DT35TB06
$47
Total Length: 20mm 24mm4mm 35mm
AngleBase® Latch Driver
Plastic sleeves for AngleBase®
E Engaging NE Non Engaging
The internal connection of this castable sleeve is non engaging.The angle base ti base is not designed to be casted so when using this sleeve you would cement the restoration onto the anglebase.
Includes final screw # 19.417. Torque is 30ncm Requires AngleBase Latch Driver.
AngleBase Final Screw
INTERNAL HEX MI - Compatible with MIS® Seven Implants
$59
ENE
Slides on tibase or AngleBase and can be scanned intraorally or with a lab scanner. FREE STL file - send request to [email protected]. For more information click this web link - CLICK HERE
Engaging Non Engaging
Scan Body on Ti Base
53.100P10 53.200P10 for all platforms - narrow, standard, wide
DLRK kit includes - Metal Housing, Lab Processing Cap, and the following inserts- Black (0 lb), Ruby (1 lbs), Aqua (1.5lbs), Peach (3 lbs), Neutral (5 lbs)
DLER kit includes - Metal Housing, Lab Processing Cap, and the following inserts- Black (0 lb), Ruby (1 lbs), Lemon (2 lbs), Emerald (4 lbs)
Page 5 of 13
Components for on top of MIS® Seven/C1/V3 Multiunit Abutments
$1314.085
$49
$39
Price
Multiunit Analog for MIS Seven Multiunit Abutment
19.085 $13
Straight Ti Base on top of MIS Seven Multiunit Abutments
15.085
Includes multiunit screw part #19.085 with .050/1.25/1.27 hex driver
Screw for Multiunit TiBase on top of MIS Seven Multiunit Abutments Torque screw to 15ncm M1.6 screw thread
All of these components can also be used on top of the MIS Seven, MIS V3 and MIS C1 Mutliunit Abutments
Intra Oral Scan Body for MIS Seven Multiunit Abutment
52.085
A hard anodized matted surface ideal for scanning, made of titanium, autoclavable, and for multiple use. The top part has an embedded screw for correct positioning, flat top and triangle for accurate scanning. The bottom part has internal screw threads to ensure the screw correctly engages into the implant every time. 7.5mm height x 4mm width. Hand tighten or use IO scan body driver part DTPEI.
$55Intra Oral Scan Body Driver
DTPEI
Hand driver for tightening and loosening of ALL DESS intraoral scan bodies (parts 52.xxx).
Titanium
40.019/1 40.020/1
40.019/2 40.020/2
40.019/3 40.020/3
40.019/4
1mm
2mm
3mm
4mm
5mm 40.019/5
41.719/217º 2.5mm3.5mm 41.719/3
30º 3.5mm 43.019/3
43.019/4
$50
$79
Page 6 of 13
17º
30º
Straight Multiunit Abutment
Angled Multiunit Abutment
4.5mm
Price
Includes abutment screw part #19.519. Use .050/1.25/1.27 driver. Torque is 20 ncm
Collar Heights
Collar Heights
E Engaging NE Non Engaging
Torque is 30ncm. Requires straight multiunit driver (part DTMURP - or Nobel, BioHorizons, 3i, Neodent, Hiossen, Megagen, Astra EV multi-base straight multiunit driver.)
EE
EE
Hand tightens onto multiunit. Available as single and pack of 4 (P4)
17.50717.507-P417.80717.807-P4
$40
$16$58$16$58
Height 5mm5mm8mm8mm
17.007
Impression Transfer for Multiunit
Includes both open & closed tray screw
Closed Tray Impression Transfer for Multiunit
14.00714.007-P10
$13$9010 Pack
Single Unit
Use same analog for both 3D printing and stone model.
Titanium Multiunit Analog - for 3D Printed Models
Multiunit Titanium Healing Abutment
$2420.100 Use Nobel driver to tighten/loosen healing abutment
PURPLE
STANDARD
GREEN
WIDE3.75 / 4.2 5.0/6.0
DESS Multiunit for MIS® Seven Implants DESS makes compatible multiunits for MIS Seven implants and components that fit on top of the DESS multiunit abutments are also compatible with the following multiunit abutments which have the same design on the top - Nobel, BioHorizons, 3i,Megagen, Hiossen, Neodent, Astra EV Multibase, and DESS Multiunis.
Page 7 of 13
Component for ontop of the DESS Multiunits for MIS® Seven Implants
$25
$49
$55Intra Oral Scan Body Driver
DTPEI
Hand driver for tightening and loosening of ALL DESS intraoral scan bodies (parts 52.xxx).
52.007A hard anodized matted surface ideal for scanning, made of titanium, autoclavable, and for multiple use. The top part has an embedded screw for correct positioning, flat top and triangle for accurate scanning. The bottom part has internal screw threads to ensure the screw correctly engages into the implant every time. 7.5mm height x 4mm width. Hand tighten or use IO scan body driver part DTPEI.
Desktop Scan Body for Multiunit
50.007Screw sold seperately. Use screw part #19.006
Intra Oral Scan Body for Multiunit
32.007-P5 Pack of 5$50
All plastic castable sleeve for on top of multiunit tibase 15.007
Plastic sleeves for casting or pressing. Castable should be cemented to ti base only. Screw sold seperately.
$3915.00715.007/8
6.0mm vertical wall shaft
8.0mm vertical wall shaft
Presandblasted for you.Includes multiunit screw part #19.006 for Nobel unigrip/star driver. For Bulk orders we can package it with any screw you wish.
Straight Multiunit Ti Bases - Vertical Walls for Maximum Bond Retention
$13Multiunit Screw - Nobel Unigrip
19.00619.006 - P10 $90
Single Unit10 PackTorque screw to 15ncm
This screw will fit into the tops of the following multiunits - Nobel, DESS, BioHorizons, 3i, Megagen, Hiossen, Neodent, Astra EV Multibase. Additional screws on page 8 and Screw measurement information on page 9.
BULK ORDER PRICING AVAILABLE
Price
All of these components will work on top of the following multiunit abutments from Nobel, BioHorizons, 3i, Megagen,Hiossen, Neodent, BSB, Astra EV Multibase, and DESS.
Titanium
53.007FREE
Slides on top of parts 15.007 or 36.007 only. STL available by emailing [email protected]. For more information click this web link - CLICK HERE
Multiunit Scan Body on Ti base - FREE STL File only
AngleBase Ti Base for Multiunit - Vertical Walls for Maximum Bond Retention
36.0074.5mm vertical wall shaft Presandblasted for youIncludes AngleBase screw part #19.306. Requires AngleBase Latch Driver
AngleBase Latch Driver
Up to 25º Angulated Screw
Channel
Price
28.007Single Unit10 Pack 11.007-P10
$27
$90
$45
$31Titanium Temporary Abutment on top of Multiunit
24.007
Includes multiunit screw part #19.006 for Nobel unigrip/star driver. 1.5 collar height, total height including collar is 12mm.
All Plastic Castable Abutment on top of Multiunit
Single unit includes multiunit screw part #19.006 for Nobel unigrip/star driver. Pack of 10 - screw is sold seperately
Chrome Cobalt Abutment on top of Multiunit
30.007
Includes multiunit screw part #19.006 for Nobel unigrip/star driver.
BULK ORDER PRICING AVAILABLE www.dess-usa.com [email protected] 855 337 7872
Component for ontop of the DESS Multiunits for MIS® Seven Implants All of these components will work on top of the following multiunit abutments from Nobel, BioHorizons, 3i, Megagen,Hiossen, Neodent, BSB, Astra EV Multibase, and DESS.
Page 9 of 13
BULK ORDER PRICING AVAILABLE www.dess-usa.com [email protected] 855 337 7872
$13
This screw will fit into the tops of the following multiunits - Nobel, DESS, BioHorizons, 3i, Megagen, Hiossen, Neodent, Astra EV Multibase. Screw measurement information on page 13
.048/1.20 hex screw for Multiunit - use .048 Driver from 3i , Megagen, Hiossen
DLC Coated screw for Multiunit - use staru unigrip driver from Nobel or DESS
19.206 $20
$13.0501.27 hex screw for Multiunit - use .050 Driver from Zimmer, BioHorizons, DESS
19.110
$1319.105
19.105-P10Single Unit10 Pack $90
Torque screw to 15ncm
Torque screw to 15ncm
Torque screw to 15ncm
Price
$13Torque screw to 15ncm Single Unit 19.041
Flat head Torx screw for Straumann Multi-base - use driver from Straumann or DESS
This screw will fit into the tops of the following multiunits - Nobel, DESS, BioHorizons, 3i, Megagen, Hiossen, Neodent, Astra EV Multibase. Screw measurement information on page 13
This screw will fit into the top of the Straumann Multi-base only.
Beveled head Torx screw for Straumann Multi-base - use driver from Straumann or DESS
This screw will fit into the top of the Straumann Multi-base only.
Component for ontop of the DESS Multiunits for MIS® Seven Implants All of these components will work on top of the following multiunit abutments from Nobel, BioHorizons, 3i, Megagen,Hiossen, Neodent, BSB, Astra EV Multibase, and DESS.
19.106 - for 3i Low Abutment Only19.106 - P10
Torque screw to 10ncm
If you wish to use the DESS straight multiunit tibases (15.007 & 15.007/8) with a .048/1.2 hex screw use part TL.106. Contact us to order.
Single Unit10 Pack
28.018
11.018-P10
29.017 29.018
12.017-P10 12.018-P10
$27$90
$27
$90
Chrome Cobalt Abutment
30.017 30.018
31.018
$45
24.017$40
ø10mm 61.017 61.018
ø14mm 71.017 71.018
$38
$45
Premilled Abutment Blank
Titanium ø14mm 62.017
Chrome Cobalt
$25
50.017
Page 10 of 13
Titanium Temporary Abutment
Includes wax up sleeve and screw part # 19.012
$49
52.017 52.018
Intraoral Scan Body
28.017
11.017-P10
Screw sold seperately use screw #19.012
Price
24.018
25.017 25.018
31.017
Includes finalscrew part # 19.012
Single unit includes screw part # 19.012
Volume discounts available - Please contact us for details
Single unit includes screw part # 19.012
Desktop Scan Body - Round top
50.018
MIS® Seven & Zimmer® Cross Compatible Components
ENE
E
NE
E
NE
ENE
4.5WIDEMIS® Seven - STANDARD
Zimmer® - 3.5
All Plastic Castable Abutment
A hard anodized matted surface ideal for scanning, made of titanium, autoclavable, and for multiple use. The top part has an embedded screw for correct positioning, flat top and triangle for accurate scanning. The bottom part has internal screw threads to ensure the screw correctly engages into the implant every time. 7.5mm height x 4mm width. Hand tighten or use IO scan body driver part DTPEI.
Zimmer and MIS Seven parts are interchangable for the MIS Standard / Zimmer 3.5 and MIS Wide / Zimmer 4.5.Ideally you should not mix and match abutments and screws specifically.
E Engaging NE Non Engaging
Titanium
4.5
19.012 19.012
19.012-P10 19.012-P10
14.017 14.018
14.017-P10 14.018-P10
Straight Titanium Abutment
Price
Single Unit $13
$90
$13
$90
$49
Titanium Analog - For 3D Printed Models
10 Pack
15º 22.017 22.018
25º 23.017 23.018
$75
Use same analog for both 3D printing and stone model
10 Pack
Single Unit
WIDE
13.017 13.018
22mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface. Includes final screw. #19.012 30ncm torque.
MIS® Seven - STANDARD Zimmer® - 3.5
Final Screw- 1.27 hex
0.3mm 15.018
0.8mm 15.017
1.5mm 15.217 15.218
3.0 mm 15.317 15.318
0.3mm 16.018
0.8mm 16.017
1.5mm 16.217 16.218
3.0 mm 16.317 16.318
$39Straight Ti base
Page 11 of 13
MIS® Seven & Zimmer® Cross Compatible Components
collar height
2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface. Includes final screw. #19.012 30ncm torque.
Angled Titanium Abutment
E
NE
E
NE
EE
NENE
Zimmer and MIS Seven parts are interchangable for the MIS Standard / Zimmer 3.5 and MIS Wide / Zimmer 4.5.Ideally you should not mix and match abutments and screws specifically.
$55Intra Oral Scan Body Driver
DTPEI
Hand driver for tightening and loosening of ALL DESS intraoral scan bodies (parts 52.xxx).
Includes final screw # 19.012 torque is 30ncm.Vertical walls for maximum bond retention and presandblasted.
Page 12 of 13
Drivers, Handles, and Adaptors
35mm
.048/1.20 Hex Latch Driver (for 3i, Megagen, Hiossen)- Laser Mark H 1.20
All drivers lengths are the overall length
18mm 20mm 24mm
$35
Price
DT18H120 DT20HDT20H1201 DT24H120 DT35H120
7mm MDTMAN7009mm MDTMAN900
$35
$65
$35
$45
$35
$45
$35
MDTLAA
Thumb Knob handle for Latch Drivers
Latch style handpiece adaptor for 4x4 Square Connection
DTANGSQ
4x4 Square Driver for inserting Straight Multiunit Abutments
DTMURP
4x4 Square Driver for latch style driver
TWADAP4x4 Square Driver for DESS LOC
DTNBSQ
Adaptor from Straumann torque wrench to 4x4 square connection
$45
DTLOC
Adaptor from Nobel torque wrench to 4x4 square connection
$45
DTSTCA
$45
DTSTSQ
Nobel Biocare Contra Angle Adaptor
DTNBCA
Straumann Contra Angle Adaptor
DT20H122 DT24H122 DT35H122 You can use either the .048/1.22 or .048/1.20 interchangeably
![TOPN Messages - Cisco · %TR-2-PANICINF: Unit [dec], PI [hex] [hex] [hex] [hex] [hex] [hex] Explanation This message is similar to the (Jeanine check source.) Recommended Action Copy](https://static.documents.pub/doc/80x56/5f96ea0c176ab92a087a6e14/topn-messages-cisco-tr-2-panicinf-unit-dec-pi-hex-hex-hex-hex-hex.jpg)
