Date post: | 06-Feb-2016 |
Category: |
Documents |
Upload: | sssureshbe |
View: | 36 times |
Download: | 2 times |
EPC- 4 Page 1 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
EPC - 4
MTO FOR STEEL STORAGE TANKS
GENERAL NOTES & ASSUMPTIONS
1 The plate thicknesses are calculated as per Design Code API 650 11th Edition Add 3 and API 620 as specified in data sheet.
2 All spherical tanks of J-60, shell thickness are calculated as per ASME sec-VIII div-2.
3 All instrument connection nozzles are assumed as 2" size for MTO.
4 Nozzles above 10" are assumed as plate fabricated.
5 All tanks with diameter > 25m 5% margin considered on total weight .
6 All tanks with diameter < 25m, 5-10% margin considered on total weight and 2.5% margin considered for Spherical tanks.
7
8 Material supplier shall consider exact thickness specified in MTO and if order quantity is less, nearest standard thickness at higher side may be considered.
9 Aluminum Dome roof weight is not included in MTO and cost of Al Dome shall be obtained from the supplier/vendor.
10 Insulation material quantity not included.
11 All internal & external paiting quantity and cost to be considered separatly .
12Floating roof primary & secondary seals, roof deck drain, bleeder vent, flame arrester, tank mixer etc… are not included in the MTO, the same shall be considered for quote purpose.
13 Tank farm area stand alone platform and connecting platform between the tanks are not included in MTO.
14 Assumption for Platform steel weights : 250 kg/m for spiral Stair way, 50 kg/m for caged ladder, 150 kg/m for roof top platform and 175kg/m for top wind Girder walkway.
Note : Refer client response (Q&A, EPC-4, Batch-4, point 352) IFR is not required for API 620 tanks J60-D-0114, 121, 241/242, 243, 901/ 902 & 905).
Calculated shell, bottom, roof plate thickness are rounded to nearest standard plate thickness (In MTO, the thickness that are revised to standard thickness is highlighted in yellow)
EPC- 4 Page 2 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
EPC- 4 Page 3 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
Floating roof primary & secondary seals, roof deck drain, bleeder vent, flame arrester, tank mixer etc… are not included in the MTO, the same shall be considered for quote purpose.
EPC- 4 Page 4 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
J60-D-0131 0132 0133 Page 5 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0131/0132/0133 Tank Dia 20300 mm MDMT - 46 Deg.C
PRODUCT PROPANE CA 1.6 mm Des. Tem. 75 Deg. C
Type: SPHERICAL Specific gravity 0.5 Des. Pres. 2000 kPa
Material Take Off
S.No. Description MaterialSize (All Dim. in mm) Unit Price Total Price
RemarksWidth (mm) Thk (mm) USD USD
A Plates1 Tank Shell - Base Material A 537 Cl 1 12000 2500 74.00 58.00 3 174.00 3032.298 2 Plate for RF Pads, Manhole and 14" Nozzle A 537 Cl 1 12000 2500 74.00 1.00 3 3.00 52.281
3 Gusset Plate A 537 Cl 1 12000 2500 12.00 0.33 3 1.00 2.823
4 Base Plate A36 12000 2500 30.00 0.33 3 1.00 7.058
5 Plate for Support Pipe A 537 CL.1/CS 12000 2000 18.00 16.00 3 48.00 162.778 6 Plate for Manhole neck & Cover A 537 Cl 1 6000 2000 74.00 0.50 3 1.50 10.456
Total w.t for 3 Tanks 3267.694 Metric Tons
Note : The above indicated thicknesses are calculated as per Design Code ASME Sec VIII Div-2 Latest Edition.
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
Plate 800 x 800 x 12 Thk Considered
Plate 800 x 800 x 30 Thk Considered
J60-D-0131 0132 0133 Page 6 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0131/0132/0133 Tank Dia 20300 mm MDMT - 46 Deg.C
PRODUCT PROPANE CA 1.6 mm Des. Tem. 75 Deg. C
Type: SPHERICAL Specific gravity 0.5 Des. Pres. 2000 kPa
Material Take Off
S.No Description Material W.t (MT) Unit W.t (kg/m) Wt. (MT)
B Structural's1 Stairways and Platform A 36 12.00 1 3 36.000
C Pipe1 2" Pipe Sch.80 A 333 Gr.6 300 - - 10.00 3 7.47 0.067 2 6" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 3 42.50 0.051 3 14" Pipe Sch.80 A 333 Gr.6 450 - - 1.00 3 158.40 0.214 4 Pipe - 4" Sch.40 for Cross Bracing A 537 CL.1/CS 12000 - - 24.00 3 72.00 62.208
D WNRF Flange + Bolts & Nuts1 2" - 300 # WNRF A 350 LF2 - - - 10 3 6.00 0.180 2 6" - 300 # WNRF A 350 LF2 - - - 1 3 25.00 0.075 3 14" - 300 # WNRF A 350 LF2 - - - 1 3 116.00 0.348
Total w.t (B+C+D) for 3 Tanks 99.143 Metric Tons
Grand total (A+B+C+D) 3 Tanks 3366.837 Metric Tons
Considering 2.5% Margin on Grand Total 3451.008 Metric Tons
Pipe Length (mm) Qty
No of tanks
J60-D-0141 0142 0143 Page 7 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0141/0142/0143 Tank Dia 24200 mm MDMT
PRODUCT BUTANE CA 1.6 mm Des. Tem.
Type: SPHERE Specific gravity 0.55 Des. Pres.
Material Take Off
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A Plates1 Tank Shell - Base Material A 537 Cl 1 12000 2500 45.00 80.00 3 240.00 2543.4002 Plate for RF Pads A 537 Cl 1 12000 2500 45.00 1.00 3 3.00 31.793
3 Gusset Plate A 537 Cl 1 12000 2500 12.00 0.33 3 1.00 2.823
4 Base Plate A36 12000 2500 30.00 0.33 3 1.00 7.058
5 Plate for Support pipe A 537 CL.1/CS 12000 2000 18.00 18.00 3 54.00 183.1256 Plate for Manhole A 537 Cl 1 6000 2000 45.00 0.50 3 1.50 6.359
Total w.t for 3 Tanks 2774.557 Metric Tons
Note : The above indicated thicknesses are calculated as per Design Code ASME Sec VIII Div-2 Latest Edition.
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0141 0142 0143 Page 8 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0141/0142/0143 Tank Dia 24200 mm MDMT
PRODUCT BUTANE CA 1.6 mm Des. Tem.
Type: SPHERE Specific gravity 0.55 Des. Pres.
Material Take Off
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structural's1 Stairways and platform A 36 12.75 1 3 38.250
C Pipe1 2" Pipe Sch. 80 A 333 Gr.6 300 - - 10.00 3 7.47 0.0672 8" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 3 65.00 0.0783 12" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 3 132.00 0.1584 Pipe - 4" Sch.40 for Bracing A 537 CL.1/CS 12000 - - 24.00 3 72.00 62.208
D WNRF Flange + Bolts & Nuts1 2" - 300 # WNRF A 350 LF2 - - - 10 3 6.00 0.1802 8" - 300 # WNRF A 350 LF2 - - - 1 3 42.00 0.1263 12" - 300 # WNRF A 350 LF2 - - - 1 3 90.00 0.270
Total w.t (B+C+D) for 3 Tanks 101.338 Metric Tons
Grand total (A+B+C+D) 3 Tanks 2875.895 Metric Tons
Considering 2.5% Margin on Grand Total 2947.792 Metric Tons
Pipe Length (mm) Qty
No of tanks
J60-D-0141 0142 0143 Page 9 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
-6 Deg.C
75 Deg. C
1000 kPa
Material Take OffTotal Price
RemarksUSD
Plate 800 x 800 x 12 Thk Considered
Plate 800 x 800 x 30 Thk Considered
J60-D-0141 0142 0143 Page 10 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
-6 Deg.C
75 Deg. C
1000 kPa
Material Take Off
J60-D-0144 Page 11 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0144 Tank Dia 24400 mm MDMT
PRODUCT C3/C4/LPG CA 1.6 mm Des. Tem.
Type: SPHERE Specific gravity 0.5-0.55 Des. Pres.
Material Take Off
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A Plates1 Tank Shell - Base Material A 537 Cl 1 12000 2500 89.00 82.00 1 82.00 1718.6792 Plate for RF Pads A 537 Cl 1 12000 2500 89.00 1.00 1 1.00 20.960
3 Gusset Plate A 537 Cl 1 12000 2500 12.00 1.00 1 1.00 2.826
4 Base Plate A36 12000 2500 30.00 1.00 1 1.00 7.065
5 Plate for Support pipe A 537 CL.1/CS 12000 2000 18.00 18.00 1 18.00 61.0426 Plate for Manhole A 537 Cl 1 6000 2000 89.00 0.50 1 0.50 4.192
Total w.t for 1 Tank 1814.763 Metric Tons
Note : The above indicated thicknesses are calculated as per Design Code ASME Sec VIII Div-2 Latest Edition.
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0144 Page 12 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0144 Tank Dia 24400 mm MDMT
PRODUCT C3/C4/LPG CA 1.6 mm Des. Tem.
Type: SPHERE Specific gravity 0.5-0.55 Des. Pres.
Material Take Off
J60-D-0144 Page 13 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0144 Tank Dia 24400 mm MDMT
PRODUCT C3/C4/LPG CA 1.6 mm Des. Tem.
Type: SPHERE Specific gravity 0.5-0.55 Des. Pres.
Material Take Off
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structural's1 Stairways and platform A 36 12.75 1 1 12.75
C Pipe1 2" Pipe Sch. 80 A 333 Gr.6 300 - - 10.00 1 7.47 0.02 2 8" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 1 65.00 0.03 3 12" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 1 132.00 0.05 4 Pipe - 4" Sch.40 for Bracing A 537 CL.1/CS 12000 - - 12.00 1 12.00 1.73
D WNRF Flange + Bolts & Nuts1 2" - 300 # WNRF A 350 LF2 - - - 10 1 6.00 0.06 2 8" - 300 # WNRF A 350 LF2 - - - 1 1 42.00 0.04 3 12" - 300 # WNRF A 350 LF2 - - - 1 1 90.00 0.09
Total w.t (B+C+D) for 1 Tank 14.771 Metric Tons
Grand total (A+B+C+D) 1 Tank 1829.534 Metric Tons
Considering 2.5% Margin on Grand Total 1875.273 Metric Tons
Pipe Length (mm) Qty
No of tanks
J60-D-0144 Page 14 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
-46 Deg.C
75 Deg. C
2000 kPa
Material Take OffTotal Price
RemarksUSD
Plate 800 x 800 x 12 Thk Considered
Plate 800 x 800 x 30 Thk Considered
J60-D-0144 Page 15 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
-46 Deg.C
75 Deg. C
2000 kPa
Material Take Off
J60-D-0144 Page 16 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
-46 Deg.C
75 Deg. C
2000 kPa
Material Take Off
J60-D-0145 Page 17 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0145 Tank Dia 20300 mm MDMT
PRODUCT LPG CA 1.6 mm Des. Tem.
Type: SPHERE Specific gravity 0.461 - 0.550 Des. Pres.
Material Take Off
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A Plates1 Tank Shell - Base material A 537 Cl 1 12000 2500 74.00 58.00 1 58.00 1010.766 2 Plate for RF Pads A 537 Cl 1 12000 2500 74.00 1.00 1 1.00 17.427
3 Gusset Plate A 537 Cl 1 12000 2500 12.00 1.00 1 1.00 2.826
4 Base Plate A36 12000 2500 30.00 1.00 1 1.00 7.065
5 Plate for Support pipe A 537 CL.1/CS 12000 2000 18.00 16.00 1 16.00 54.259 6 Plate for Manhole A 537 Cl 1 6000 2000 74.00 1.00 1 1.00 6.971
Total w.t for 1 Tank 1099.3 Metric Tons
Note : The above indicated thicknesses are calculated as per Design Code ASME Sec VIII Div-2 Latest Edition.
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0145 Page 18 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0145 Tank Dia 20300 mm MDMT
PRODUCT LPG CA 1.6 mm Des. Tem.
Type: SPHERE Specific gravity 0.461 - 0.550 Des. Pres.
Material Take Off
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structural's1 Stairways and platform A 36 12.00 1 1 12.000
C Pipe1 2" Pipe Sch. 80 A 333 Gr.6 300 - - 10.00 1 7.47 0.022 2 6" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 1 42.50 0.017 3 10" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 1 96.00 0.038 4 Pipe - 4" Sch.40 for Bracing A 537 CL.1/CS 12000 - - 12.00 1 12.00 1.728
D WNRF Flange + Bolts & Nuts1 2" - 300 # WNRF A 350 LF2 - - - 10 1 6.00 0.060 2 6" - 300 # WNRF A 350 LF2 - - - 1 1 25.00 0.025 3 10" - 300 # WNRF A 350 LF2 - - - 1 1 62.00 0.062
Total w.t (B+C+D) for 1 Tank 13.953 Metric Tons
Grand total (A+B+C+D) 1 Tank 1113.267 Metric Tons
Considering 2.5% Margin on Grand Total 1141.098 Metric Tons
Pipe Length (mm) Qty
No of tanks
J60-D-0145 Page 19 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
-46 Deg.C
75 Deg. C
2000 kPa
Material Take OffTotal Price
RemarksUSD
Plate 800 x 800 x 12 Thk Considered
Plate 800 x 800 x 30 Thk Considered
J60-D-0145 Page 20 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
-46 Deg.C
75 Deg. C
2000 kPa
Material Take Off
J60-D-0151 to 0154 Page 21 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0151/52/53/54 Tank Dia 20800 mm MDMT
PRODUCT LPG CA 1.6 mm Des. Tem.
Type: SPHERE Specific gravity 0.5 Des. Pres.
Material Take Off
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A Plates1 Tank Shell - Base Material A 537 Cl 1 12000 2500 76.00 60.00 4 240.00 4295.5202 Plate for RF Pads A 537 Cl 1 12000 2500 76.00 1.00 4 4.00 71.592
3 Gusset Plate A 537 Cl 1 12000 2500 12.00 0.50 4 2.00 5.652
4 Base Plate A36 12000 2500 30.00 0.50 4 2.00 14.130
5 Plate for Support pipe A 537 CL.1/CS 12000 2000 18.00 16.00 4 64.00 217.0376 Plate for Manhole A 537 Cl 1 6000 2000 76.00 1.00 4 4.00 28.637
Total w.t for 4 Tanks 4632.6 Metric Tons
Note : The above indicated thicknesses are calculated as per Design Code ASME Sec VIII Div-2 Latest Edition.
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0151 to 0154 Page 22 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0151/52/53/54 Tank Dia 20800 mm MDMT
PRODUCT LPG CA 1.6 mm Des. Tem.
Type: SPHERE Specific gravity 0.5 Des. Pres.
Material Take Off
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structural's1 Stairways and platform A 36 12.00 1 4 48.000
C Pipe1 2" Pipe Sch. 80 A 333 Gr.6 300 - - 10.00 4 7.47 0.090 2 8" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 4 65.00 0.104 3 12" Pipe Sch.80 A 333 Gr.6 400 - - 1.00 4 132.00 0.211 4 Pipe - 4" Sch.40 for Bracing A 537 CL.1/CS 12000 - - 12.00 4 48.00 27.648
D WNRF Flange + Bolts & Nuts1 2" - 300 # WNRF A 350 LF2 - - - 10 4 6.00 0.240 2 8" - 300 # WNRF A 350 LF2 - - - 1 4 42.00 0.168 3 12" - 300 # WNRF A 350 LF2 - - - 1 4 90.00 0.360
Total w.t (B+C+D) for 4 Tanks 76.821 Metric Tons
Grand total (A+B+C+D) 4 Tanks 4709.388 Metric Tons
Considering 2.5% Margin on Grand Total 4827.123 Metric Tons
Pipe Length (mm) Qty
No of tanks
J60-D-0151 to 0154 Page 23 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
-46 Deg.C
75 Deg. C
2000 kPa
Material Take OffTotal Price
RemarksUSD
Plate 800 x 800 x 12 Thk Considered
Plate 800 x 800 x 30 Thk Considered
J60-D-0151 to 0154 Page 24 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
-46 Deg.C
75 Deg. C
2000 kPa
Material Take Off
J55-D-0101 Page 25 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0101 Tank Dia 9000 mm MDMT
PRODUCT Spent caustic Tank Ht 3500 mm Des. Tem.
Type: Cone roof Specific gravity 1.2 Des. Pres.
Corrosion Allowa. 3.2 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2000 5.0 2.50 1 2.50 2.355 2 Tank shell 2nd course A36 12000 1500 5.0 2.50 1 2.50 1.766
3 Tank Bottom Plate A 36 12000 2500 10.0 3.00 1 3.00 7.065 4 Tank Roof Plate A 36 12000 2500 10.0 3.00 1 3.00 7.065
5 Plate for RF pad of Nozzles & Manways A 36 12000 2000 5.0 0.25 1 0.25 0.236
6 Plate for RF pad of Roof Nozzles & Manways A 36 12000 2000 5.0 0.25 1 0.25 0.236
7 Plate for Nozzle neck A 36 12000 2500 5.0 0.50 1 0.50 0.589 8 Plate for manway cover / bolting flange A 36 12000 2500 12.0 0.10 1 0.10 0.283 9 Plate for wind girder A 36 0 0 0.0 0.00 1 0.00 0.000
10 Miscellaneous - Platform & stair A 36 12000 2500 5.0 0.50 1 0.50 0.589
Total w.t (A) for 1 Tank 20.182
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J55-D-0101 Page 26 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0101 Tank Dia 9000 mm MDMT
PRODUCT Spent caustic Tank Ht 3500 mm Des. Tem.
Type: Cone roof Specific gravity 1.2 Des. Pres.
Corrosion Allowa. 3.2 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 50 x 50 x 5 ) A 36 28274 1 4.10 0.12 2 Stairways and platform A 36 4 1 4.00 3 Roof structure A 36 4 1 4.00 4 Miscellaneous support 1.0
C Pipe1 2" Pipe SA106 Gr.B 10000 - - 1.00 1 7.47 0.07 2 3" Pipe SA106 Gr.B 500 - - 1.00 1 15.26 0.01 3 4" Pipe SA106 Gr.B 9000 - - 1.00 1 22.30 0.20 4 8" Pipe SA106 Gr.B 500 - - 1.00 1 64.57 0.03
D Flange1 2" Nozzle - 150 # A 105 12 1 2.30 0.03 2 3" Nozzle - 150 # A 105 2 1 3.70 0.01 3 4" Nozzle - 150 # A 105 8 1 5.90 0.05 4 6" Nozzle - 150 # A 105 1 8.60 0.00 5 8" Nozzle - 150 # A 105 1 1 13.70 0.01 6 Fittings, Bolts & Nuts A 105 1 0.25
Total w.t (B+C+D) for 1 Tank 9.78 Mt
Grand total (A+B+C+D) 1 Tank 29.96 Mt
With 10% margin 1 Tank 32.96 Mt
Pipe Lenth (mm) Qty
No of tanks
J55-D-0101 Page 27 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
MTOTotal Price
RemarksUSD
Not applicable
J55-D-0101 Page 28 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
J55-D-0201 Page 29 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0201 Tank Dia 36000 mm MDMT
PRODUCT Oily waste water Tank Ht 14000 mm Des. Tem.
Type: Cone roof Specific gravity 1 Des. Pres.
Corrosion Allowa. 3.2 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 20.00 10.00 1 10.00 47.100 2 Tank shell 2nd course A36 12000 2500 18.00 10.00 1 10.00 42.390 3 Tank shell 3rd course A36 12000 2500 14.00 10.00 1 10.00 32.970 4 Tank shell 4th course A36 12000 2500 12.00 10.00 1 10.00 28.260 5 Tank shell 5th course A36 12000 2000 8.00 10.00 1 10.00 15.072 6 Tank shell 6th course A36 12000 2000 8.00 10.00 1 10.00 15.072
7 Tank Bottom Plate A 36 12000 2500 10.00 34.00 1 34.00 80.070 8 Annular plates A 36 12000 2500 10.00 5.00 1 5.00 11.775 9 Tank Roof Plate A 36 12000 2500 10.00 38.00 1 38.00 89.490
5 Plate for RF pad of Nozzles & Manways A 36 12000 2500 20.00 0.50 1 0.50 2.355 6 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 1 1.00 1.178 7 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 1 0.50 1.649 8 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.10 1 0.10 0.424 9 Plate for wind girder - 0 0 0.00 0.00 0 0.00 0.000
10 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 1 1.00 1.178
Total w.t (A) for 1 Tank 368.981
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J55-D-0201 Page 30 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0201 Tank Dia 36000 mm MDMT
PRODUCT Oily waste water Tank Ht 14000 mm Des. Tem.
Type: Cone roof Specific gravity 1 Des. Pres.
Corrosion Allowa. 3.2 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 113097 1 17.70 2.00 2 Stairways and platform A 36 9.15 1 9.15 3 Top wind girder / walkway A 36 1 0.00 4 Roof structure A 36 60 1 60.00 5 Miscellaneous support 3.0
C Pipe1 2" Pipe SA106 Gr.B 500 - - 1.00 1 7.47 0.00 2 3" Pipe SA106 Gr.B 500 - - 1.00 1 15.26 0.01 3 4" Pipe SA106 Gr.B 30000 - - 1.00 1 22.30 0.67 4 6" Pipe SA106 Gr.B 500 - - 1.00 1 42.50 0.02 5 8" Pipe SA106 Gr.B 500 - - 1.00 1 64.57 0.03
D Flange1 2" Nozzle - 150 # A 105 4 1 2.30 0.01 2 3" Nozzle - 150 # A 105 2 1 3.70 0.01 3 4" Nozzle - 150 # A 105 8 1 5.90 0.05 4 6" Nozzle - 150 # A 105 2 1 8.60 0.02 5 8" Nozzle - 150 # A 105 2 1 13.70 0.03 6 12" Nozzle - 150 # A 105 2 1 29.00 0.06 7 14" Nozzle - 150 # A 105 2 1 41.00 0.08 8 Fittings, Bolts & Nuts A 105 0.25
Total w.t (B+C+D) for 1 Tank 75.38 Mt
Grand total (A+B+C+D) 1 Tank 444.37 Mt
With 5% margin 1 Tank 466.58 Mt
Pipe Lenth (mm) Qty
No of tanks
J55-D-0201 Page 31 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
MTOTotal Price
RemarksUSD
not applicable
J55-D-0201 Page 32 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
J55-D-0202 Page 33 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0202 Tank Dia 36000 mm MDMT
PRODUCT Oily waste water Tank Ht 14000 mm Des. Tem.
Type: Cone roof Specific gravity 1 Des. Pres.
Corrosion Allowa. 3.2 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 20.00 10.00 1 10.00 47.100 2 Tank shell 2nd course A36 12000 2500 18.00 10.00 1 10.00 42.390 3 Tank shell 3rd course A36 12000 2500 14.00 10.00 1 10.00 32.970 4 Tank shell 4th course A36 12000 2500 12.00 10.00 1 10.00 28.260 5 Tank shell 5th course A36 12000 2000 8.00 10.00 1 10.00 15.072 6 Tank shell 6th course A36 12000 2000 8.00 10.00 1 10.00 15.072
7 Tank Bottom Plate A 36 12000 2500 10.00 34.00 1 34.00 80.070 8 Annular plates A 36 12000 2500 10.00 5.00 1 5.00 11.775 9 Tank Roof Plate A 36 12000 2500 10.00 38.00 1 38.00 89.490
5 Plate for RF pad of Nozzles & Manways A 36 12000 2500 20.00 0.50 1 0.50 2.355 6 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 1 1.00 1.178 7 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 1 0.50 1.649 8 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.10 1 0.10 0.424 9 Plate for wind girder A 36 12000 2500 8.00 0.00 1 0.00 0.000
10 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 1 1.00 1.178
Total w.t (A) for 1 Tank 368.981
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J55-D-0202 Page 34 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0202 Tank Dia 36000 mm MDMT
PRODUCT Oily waste water Tank Ht 14000 mm Des. Tem.
Type: Cone roof Specific gravity 1 Des. Pres.
Corrosion Allowa. 3.2 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 113097 1 17.70 2.002 2 Stairways and platform A 36 9.150 1 9.150 3 Top wind girder / walkway A 36 1 0.000 4 Roof structure A 36 60.000 1 60.000 5 Miscellaneous support 3.0
C Pipe1 2" Pipe SA106 Gr.B 500 - - 1.00 1 7.47 0.004 2 3" Pipe SA106 Gr.B 500 - - 1.00 1 15.26 0.008 3 4" Pipe SA106 Gr.B 30000 - - 1.00 1 22.30 0.669 4 6" Pipe SA106 Gr.B 500 - - 1.00 1 42.50 0.021 5 8" Pipe SA106 Gr.B 500 - - 1.00 1 64.57 0.032
D Flange1 2" Nozzle - 150 # A 105 4 1 2.30 0.009 2 3" Nozzle - 150 # A 105 2 1 3.70 0.007 3 4" Nozzle - 150 # A 105 8 1 5.90 0.047 4 6" Nozzle - 150 # A 105 2 1 8.60 0.017 5 8" Nozzle - 150 # A 105 2 1 13.70 0.027 6 12" Nozzle - 150 # A 105 2 1 29.00 0.058 7 14" Nozzle - 150 # A 105 2 1 41.00 0.082 8 Fittings, Bolts & Nuts A 105 0.250
Total w.t (B+C+D) for 1 Tank 75.384 Mt
Grand total (A+B+C+D) 1 Tank 444.366 Mt
With 5% margin 1 Tank 466.584 Mt
Pipe Lenth (mm) Qty
No of tanks
J55-D-0202 Page 35 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0202 Tank Dia 36000 mm MDMT
PRODUCT Oily waste water Tank Ht 14000 mm Des. Tem.
Type: Cone roof Specific gravity 1 Des. Pres.
Corrosion Allowa. 3.2 mm
J55-D-0202 Page 36 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
MTO
Total PriceRemarks
USD
J55-D-0202 Page 37 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
J55-D-0202 Page 38 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
J55-D-0204 Page 39 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0204 Tank Dia 36000 mm MDMT
PRODUCT Oily water water Tank Ht 14000 mm Des. Tem.
Type: Cone roof Specific gravity 1 Des. Pres.
Corrosion Allowa. 3.2 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 20.00 10.00 1 10.00 47.100 2 Tank shell 2nd course A36 12000 2500 18.00 10.00 1 10.00 42.390 3 Tank shell 3rd course A36 12000 2500 14.00 10.00 1 10.00 32.970 4 Tank shell 4th course A36 12000 2500 12.00 10.00 1 10.00 28.260 5 Tank shell 5th course A36 12000 2000 8.00 10.00 1 10.00 15.072 6 Tank shell 6th course A36 12000 2000 8.00 10.00 1 10.00 15.072
7 Tank Bottom Plate A 36 12000 2500 10.00 34.00 1 34.00 80.070 8 Annular plates A 36 12000 2500 10.00 5.00 1 5.00 11.775 9 Tank Roof Plate A 36 12000 2500 10.00 38.00 1 38.00 89.490
10 Plate for RF pad of Nozzles & Manways A 36 12000 2500 20.00 0.50 1 0.50 2.355 11 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 1 1.00 1.178 12 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 1 0.50 1.649 13 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.10 1 0.10 0.424 14 Plate for wind girder A 36 12000 2500 8.00 0.00 1 0.00 0.000 15 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 1 1.00 1.178
Total w.t (A) for 1 Tank 368.981
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J55-D-0204 Page 40 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0204 Tank Dia 36000 mm MDMT
PRODUCT Oily water water Tank Ht 14000 mm Des. Tem.
Type: Cone roof Specific gravity 1 Des. Pres.
Corrosion Allowa. 3.2 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 113097 1 17.70 2.002 2 Stairways and platform A 36 9.15 1 9.150 3 Top wind girder / walkway A 36 1 0.000 4 Roof structure A 36 60 1 60.000 5 Miscellaneous support 3.0
C Pipe1 2" Pipe SA106 Gr.B 500 - - 1.00 1 7.47 0.004 2 3" Pipe SA106 Gr.B 500 - - 1.00 1 15.26 0.008 3 4" Pipe SA106 Gr.B 30000 - - 1.00 1 22.30 0.669 4 6" Pipe SA106 Gr.B 500 - - 1.00 1 42.50 0.021 5 8" Pipe SA106 Gr.B 500 - - 1.00 1 64.57 0.032
D Flange1 2" Nozzle - 150 # A 105 4 1 2.30 0.009 2 3" Nozzle - 150 # A 105 2 1 3.70 0.007 3 4" Nozzle - 150 # A 105 8 1 5.90 0.047 4 6" Nozzle - 150 # A 105 2 1 8.60 0.017 5 8" Nozzle - 150 # A 105 2 1 13.70 0.027 6 12" Nozzle - 150 # A 105 2 1 29.00 0.058 7 14" Nozzle - 150 # A 105 2 1 41.00 0.082 8 Fittings, Bolts & Nuts A 105 0.250
Total w.t (B+C+D) for 1 Tank 75.384 Mt
Grand total (A+B+C+D) 1 Tank 444.366 Mt
With 5% margin 1 Tank 466.584 Mt
Pipe Lenth (mm) Qty
No of tanks
J55-D-0204 Page 41 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
MTOTotal Price
RemarksUSD
J55-D-0204 Page 42 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
J55-D-0205 Page 43 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0205 Tank Dia 4000 mm MDMT
PRODUCT Caustic / Sulphuric Tank Ht 4000 mm Des. Tem.
Type: Cone roof Specific gravity 1.84 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2000 5.00 1.50 1 1.50 1.413 2 Tank shell 2nd course A36 12000 2000 5.00 1.50 1 1.50 1.413
3 Tank Bottom Plate A 36 12000 2500 8.00 0.60 1 0.60 1.130 4 Tank Roof Plate A 36 12000 2500 8.00 1.00 1 1.00 1.884
5 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.40 1 0.40 0.471 6 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.40 1 1.00 1.178 7 Plate for Nozzle neck A 36 12000 2500 5.00 0.20 1 0.20 0.236 8 Plate for manway cover / bolting flange A 36 12000 2500 12.00 0.10 1 0.10 0.283 9 Plate for wind girder A 36 12000 2500 8.00 0.50 1 0.50 0.942
10 Miscellaneous - Platform & stair A 36 12000 2500 5.00 0.50 1 0.50 0.589
Total w.t (A) for 1 Tanks 9.538
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J55-D-0205 Page 44 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0205 Tank Dia 4000 mm MDMT
PRODUCT Caustic / Sulphuric Tank Ht 4000 mm Des. Tem.
Type: Cone roof Specific gravity 1.84 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 50 x 50 x 5 ) A 36 12566 1 4.10 0.052 2 Stairways and platform A 36 1.0 1 1.000 3 Roof structure A 36 1.0 1 1.000 5 Miscellaneous support 1.0
C Pipe1 2" Pipe SA106 Gr.B 1000 - - 1.00 1 7.47 0.007 2 3" Pipe SA106 Gr.B 7000 1.00 1 15.26 0.107 3 4" Pipe SA106 Gr.B 2500 - - 1.00 1 22.30 0.056 4 8" Pipe SA106 Gr.B 500 - - 1.00 1 64.57 0.032
D Flange1 2" Nozzle - 150 # A 105 6 1 2.30 0.014 2 3" Nozzle - 150 # A 105 7 1 3.70 0.026 3 4" Nozzle - 150 # A 105 6 1 5.90 0.035 4 8" Nozzle - 150 # A 105 2 1 13.70 0.027 5 Fittings, Bolts & Nuts A 105 1 0.500
Total w.t (B+C+D) for 1 Tank 3.856 Mt
Grand total (A+B+C+D) 1 Tank 13.394 Mt
With 10% margin 1 Tank 14.734 Mt
Pipe Lenth (mm) Qty
No of tanks
J55-D-0205 Page 45 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
MTOTotal Price
RemarksUSD
J55-D-0205 Page 46 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
J55-D-0501A&B Page 47 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0501 A & B Tank Dia 5000 mm MDMT
PRODUCT Oily Sludge Tank Ht 7000 mm Des. Tem.
Type: Cone roof Specific gravity 1.02 Des. Pres.
Corrosion Allowa. 3.2 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 5.00 2.00 2 4.00 4.7 2 Tank shell 2nd course A36 12000 2500 5.00 2.00 2 4.00 4.7 3 Tank shell 3rd course A36 12000 2000 5.00 2.00 2 4.00 3.8
4 Tank Bottom Plate A 36 12000 2500 10.00 1.20 2 2.40 5.7 5 Tank Roof Plate A 36 12000 2500 10.00 1.20 2 2.40 5.7
6 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 2 1.00 1.2 7 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 2 1.00 1.2 8 Plate for Nozzle neck A 36 12000 2500 5.00 0.20 2 0.40 0.47 9 Plate for manway cover / bolting flange A 36 12000 2500 14.00 0.10 2 0.20 0.66
10 Plate for wind girder A 36 12000 2500 8.00 0.00 2 0.00 0.00 11 Miscellaneous - Platform & stair A 36 12000 2500 5.00 0.50 2 1.00 1.18
Total w.t (A) for 2 Tanks 29.2
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J55-D-0501A&B Page 48 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0501 A & B Tank Dia 5000 mm MDMT
PRODUCT Oily Sludge Tank Ht 7000 mm Des. Tem.
Type: Cone roof Specific gravity 1.02 Des. Pres.
Corrosion Allowa. 3.2 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 50 x 50 x 5 ) A 36 15708 2 4.10 0.129 2 Stairways and platform A 36 2 2 4.000 3 Roof structure A 36 1 2 2.000 5 Miscellaneous support 1.0
C Pipe1 2" Pipe SA106 Gr.B 1200 - - 1.00 2 7.47 0.018 2 4" Pipe SA106 Gr.B 6000 - - 1.00 2 22.30 0.268 3 6" Pipe SA106 Gr.B 12500 1.00 2 42.50 1.063 4 8" Pipe SA106 Gr.B 300 - - 1.00 2 64.57 0.039
D Flange1 2" Nozzle - 150 # A 105 7 2 2.30 0.032 2 4" Nozzle - 150 # A 105 8 2 5.90 0.094 3 6" Nozzle - 150 # A 105 9 2 8.60 0.155 4 8" Nozzle - 150 # A 105 1 2 13.70 0.027 5 Fittings, Bolts & Nuts A 105 2 0.500
Total w.t (B+C+D) for 2 Tanks 9.324 Mt
Grand total (A+B+C+D) 2 Tanks 38.479 Mt
With 10% margin 2 Tanks 42.327 Mt
Pipe Lenth (mm) Qty
No of tanks
J55-D-0501A&B Page 49 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
MTOTotal Price
RemarksUSD
J55-D-0501A&B Page 50 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
J55-D-0502A&B Page 51 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0502 A & B Tank Dia 6000 mm MDMT
PRODUCT Skimmed oil Tank Ht 6000 mm Des. Tem.
Type: Cone roof Specific gravity 0.9 Des. Pres.
Corrosion Allowa. 3.2 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2000 5.00 2.00 2 4.00 3.8 2 Tank shell 2nd course A36 12000 2000 5.00 2.00 2 4.00 3.8 3 Tank shell 3rd course A36 12000 2000 5.00 2.00 2 4.00 3.8
4 Tank Bottom Plate A 36 12000 2500 10.00 2.00 2 4.00 9.4 5 Tank Roof Plate A 36 12000 2500 10.00 1.50 2 3.00 7.1
6 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 2 1.00 1.2 7 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 0.50 2 1.00 1.2 8 Plate for Nozzle neck A 36 12000 2500 5.00 0.20 2 0.40 0.47 9 Plate for manway cover / bolting flange A 36 12000 2500 14.00 0.10 2 0.20 0.66
10 Plate for wind girder A 36 12000 2500 8.00 1.00 2 2.00 3.77 11 Miscellaneous - Platform & stair A 36 12000 2500 5.00 0.50 2 1.00 1.18
Total w.t (A) for 2 Tanks 36.2
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J55-D-0502A&B Page 52 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J55-D-0502 A & B Tank Dia 6000 mm MDMT
PRODUCT Skimmed oil Tank Ht 6000 mm Des. Tem.
Type: Cone roof Specific gravity 0.9 Des. Pres.
Corrosion Allowa. 3.2 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 50 x 50 x 5 ) A 36 18850 2 4.10 0.155 2 Stairways and platform A 36 1.5 2 3.000 3 Roof structure A 36 1.0 2 2.000 5 Miscellaneous support 1.0
C Pipe1 2" Pipe SA106 Gr.B 1000 - - 1.00 2 7.47 0.015 2 3" Pipe SA106 Gr.B 300 1.00 2 15.26 0.009 3 4" Pipe SA106 Gr.B 400 - - 1.00 2 22.30 0.018 4 6" Pipe SA106 Gr.B 11200 1.00 2 42.50 0.952 5 8" Pipe SA106 Gr.B 300 - - 1.00 2 64.57 0.039
D Flange1 2" Nozzle - 150 # A 105 14 2 2.30 0.064 2 3" Nozzle - 150 # A 105 2 2 3.70 0.015 3 4" Nozzle - 150 # A 105 2 2 5.90 0.024 4 6" Nozzle - 150 # A 105 10 2 8.60 0.172 5 8" Nozzle - 150 # A 105 2 2 13.70 0.055 6 Fittings, Bolts & Nuts A 105 2 0.500
Total w.t (B+C+D) for 2 Tanks 8.017 Mt
Grand total (A+B+C+D) 2 Tanks 44.237 Mt
With 10% margin 2 Tanks 48.660 Mt
Pipe Lenth (mm) Qty
No of tanks
J55-D-0502A&B Page 53 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
MTOTotal Price
RemarksUSD
J55-D-0502A&B Page 54 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
ATM kPa
J60-D-0111 to 113 Page 55 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0111 to 0113 Tank Dia 66000 mm MDMT
PRODUCT Whole Napth Tank Ht 22000 mm Des. Tem.
Type: IFR with Alum. dome Specific gravity 0.704 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A516 Gr70 12000 2500 36.00 18.00 3 54.00 457.812 2 Tank shell 2nd course A516 Gr70 12000 2500 30.00 18.00 3 54.00 381.510 3 Tank shell 3rd course A516 Gr70 12000 2500 25.00 18.00 3 54.00 317.925 4 Tank shell 4th course A516 Gr70 12000 2500 22.00 18.00 3 54.00 279.774 5 Tank shell 5th course A516 Gr70 12000 2500 18.00 18.00 3 54.00 228.906 6 Tank shell 6th course A 36 12000 2500 16.00 18.00 3 54.00 203.472 7 Tank shell 7th course A 36 12000 2500 10.00 18.00 3 54.00 127.170 8 Tank shell 8th course A 36 12000 2500 10.00 17.00 3 51.00 120.105 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 17.00 3 51.00 96.084
10 Tank Bottom Plate A 36 12000 2500 8.00 114.00 3 342.00 644.328 11 Annular plates A 36 12000 2500 14.00 10.00 3 30.00 98.910
12 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 36.00 1.00 3 3.00 25.434 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1.00 3 1.00 1.413 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 3 3.00 9.891 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.15 3 0.45 2.331 16 Plate for wind girder A 36 12000 2500 6.00 3.53 3 10.59 14.964 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 3 3.00 3.533
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t (A) for 3 Tanks 3013.562
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0111 to 113 Page 56 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0111 to 0113 Tank Dia 66000 mm MDMT
PRODUCT Whole Napth Tank Ht 22000 mm Des. Tem.
Type: IFR with Alum. dome Specific gravity 0.704 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 207345 3 17.70 11.010 2 Stairways and platform A 36 15.87 3 47.610 3 Top wind girder / walkway A 36 36.29 3 108.870 4 Roof structure A 36 0.000 5 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 GR B 120000 - - 1.00 3 7.47 2.689 2 3" Pipe SA106 GR B 600 - - 1.00 3 15.26 0.027 3 6" Pipe SA106 GR B 1000 - - 1.00 3 42.50 0.128 4 8" Pipe SA106 GR B 39000 - - 1.00 3 64.57 7.555 5 10" Pipe 225 - - 1.00 3 81.46 0.055
D Flange1 2" Nozzle - 150 # A 105 4 3 2.30 0.028 2 3" Nozzle - 150 # A 105 3 3 3.70 0.033 3 6" Nozzle - 150 # A 105 4 3 8.60 0.103 4 8" Nozzle - 150 # A 105 3 3 13.70 0.123 5 10" Nozzle - 150 # A 105 1 3 19.50 0.059 6 18" Nozzle - 150 # A 105 2 3 59.00 0.354 7 38" Nozzle - 150 # A 105 1 3 230.00 0.690 8 42" Nozzle - 150 # A 105 1 3 310.00 0.930 9 Fittings, Bolts & Nuts A 105 1 3 3.000
Total w.t (B+C+D) for 3 Tank 188.264 Mt
Grand total (A+B+C+D) 3 Tank 3,201.825 Mt
With 5% margin 3 Tank 3,361.917 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0111 to 113 Page 57 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0111 to 0113 Tank Dia 66000 mm MDMT
PRODUCT Whole Napth Tank Ht 22000 mm Des. Tem.
Type: IFR with Alum. dome Specific gravity 0.704 Des. Pres.
Corrosion Allowa. 1.6 mm
J60-D-0111 to 113 Page 58 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0111 to 113 Page 59 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
J60-D-0111 to 113 Page 60 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
J60-D-0122 Page 61 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0122 Tank Dia 61000 mm MDMT
PRODUCT Hydro. Heavy naptha Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.694 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A 516 Gr 70 12000 2500 35.00 16.00 1 16.00 131.880 2 Tank shell 2nd course A 516 Gr 70 12000 2500 30.00 16.00 1 16.00 113.040 3 Tank shell 3rd course A 516 Gr 70 12000 2500 25.00 16.00 1 16.00 94.200 4 Tank shell 4th course A 516 Gr 70 12000 2500 22.00 16.00 1 16.00 82.896 5 Tank shell 5th course A 516 Gr 70 12000 2500 18.00 16.00 1 16.00 67.824 6 Tank shell 6th course A 36 12000 2500 16.00 16.00 1 16.00 60.288 7 Tank shell 7th course A 36 12000 2500 12.00 16.00 1 16.00 45.216 8 Tank shell 8th course A 36 12000 2500 10.00 16.00 1 16.00 37.680 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 16.00 1 16.00 30.144
10 Tank Bottom Plate A 36 12000 2500 8.00 95.00 1 95.00 178.980 11 Annular plates A 36 12000 2500 14.00 10.00 1 10.00 32.970
12 Plate for RF pad of Nozzles & Manways A 516 Gr 70 12000 2500 35.00 1.00 1 1.00 8.243 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 1 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 1 1.00 3.297 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 1 0.10 0.518 16 Plate for wind girder A 36 12000 2500 6.00 10.00 1 10.00 14.130 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 1 3.00 3.533
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t for 1 Tanks 906.016
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0122 Page 62 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0122 Tank Dia 61000 mm MDMT
PRODUCT Hydro. Heavy naptha Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.694 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 191637 1 17.70 3.392 Stairways and platform A 36 8.48 1 8.483 Top wind girder / walkway A 36 10.45 1 10.454 Roof structure A 36 0.005 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 Gr.B 112000 - - 1.00 1 7.47 0.842 3" Pipe SA106 Gr.B 200 - - 1.00 1 15.26 0.003 6" Pipe SA106 Gr.B 800 - - 1.00 1 42.50 0.034 8" Pipe SA106 Gr.B 38500 - - 1.00 1 64.57 2.495 10" Pipe SA106 Gr.B 450 - - 1.00 1 81.46 0.04
D Flange1 2" Nozzle - 150 # A 105 4 1 2.30 0.012 3" Nozzle - 150 # A 105 4 1 3.70 0.013 6" Nozzle - 150 # A 105 4 1 8.60 0.034 8" Nozzle - 150 # A 105 1 1 13.70 0.015 10" Nozzle - 150 # A 105 2 1 19.50 0.046 20" Nozzle - 150 # A 105 2 1 75.00 0.157 Fittings, Bolts & Nuts A 105 1 1 1.00
Total w.t (B+C+D) for 1 Tank 31.98 Mt
Grand total (A+B+C+D) 1 Tank 937.99 Mt
With 5% margin 1 Tank 984.89 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0122 Page 63 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium
Floating roof
J60-D-0122 Page 64 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
J60-D-0201 Page 65 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0201 Tank Dia 26000 mm MDMT
PRODUCT Light Reformate Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.693 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A 36 12000 2500 18.00 7.00 1 7.00 29.673 2 Tank shell 2nd course A 36 12000 2500 16.00 7.00 1 7.00 26.376 3 Tank shell 3rd course A 36 12000 2500 14.00 7.00 1 7.00 23.079 4 Tank shell 4th course A 36 12000 2500 12.00 7.00 1 7.00 19.782 5 Tank shell 5th course A 36 12000 2500 10.00 7.00 1 7.00 16.485 6 Tank shell 6th course A 36 12000 2500 8.00 7.00 1 7.00 13.188 7 Tank shell 7th course A 36 12000 2500 6.00 7.00 1 7.00 9.891 8 Tank shell 8th course A 36 12000 2500 6.00 7.00 1 7.00 9.891 9 Tank shell 9th course (Top) A 36 12000 2000 6.00 7.00 1 7.00 7.913
10 Tank Bottom Plate A 36 12000 2500 8.00 18 1 18.00 33.912 11 Annular plates A 36 12000 2500 8.00 4 1 4.00 7.536
12 Plate for RF pad of Nozzles & Manways A 36 12000 2500 18.00 1 1 1.00 4.239 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1 1 1.00 1.413 14 Plate for Nozzle neck A 36 12000 2500 14.00 0.10 1 0.10 0.330 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 1 0.10 0.518 16 Plate for wind girder A 36 12000 2500 8.00 1.00 1 1.00 1.884 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 4.00 1 4.00 4.710
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t (A) for 1 Tank 210.820
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0201 Page 66 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0201 Tank Dia 26000 mm MDMT
PRODUCT Light Reformate Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.693 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 81681 1 17.70 1.446 2 Stairways and platform A 36 9.58 1 9.580 3 Top wind girder / walkway A 36 14.29 1 14.290 4 Roof structure A 36 0.000 5 Miscellaneous support 2.000
C Pipe1 2" Pipe SA106 Gr.B 66000 - - 1.00 1 7.47 0.493 2 4" Pipe SA106 Gr.B 5000 - - 1.00 1 22.30 0.112 3 6" Pipe SA106 Gr.B 2000 - - 1.00 1 42.50 0.085 4 8" Pipe SA106 Gr.B 23000 - - 1.00 1 64.57 1.485
1
D Flange1 2" Nozzle - 150 # A 105 5 1 2.30 0.012 2 4" Nozzle - 150 # A 105 5 1 5.90 0.030 3 6" Nozzle - 150 # A 105 7 1 8.60 0.060 4 8" Nozzle - 150 # A 105 2 1 13.70 0.027 5 Fittings, Bolts & Nuts A 105 1 1.000
Total w.t (B+C+D) for 1 Tank 30.619 Mt
Grand total (A+B+C+D) 1 Tank 241.439 Mt
With 10% margin 1 Tank 265.582 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0201 Page 67 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0201 Page 68 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
J60-D-0202 0203 Page 69 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0202/0203 Tank Dia 36000 mm MDMT
PRODUCT HEAVY REFORMATE Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.817 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.60 12000 2500 24.00 10 2 20.00 113.040 2 Tank shell 2nd course SA 516 Gr.60 12000 2500 22.00 10 2 20.00 103.620 3 Tank shell 3rd course A 36 12000 2500 18.00 10 2 20.00 84.780 4 Tank shell 4th course A 36 12000 2500 16.00 10 2 20.00 75.360 5 Tank shell 5th course A 36 12000 2500 14.00 10 2 20.00 65.940 6 Tank shell 6th course A 36 12000 2500 10.00 10 2 20.00 47.100 7 Tank shell 7th course A 36 12000 2500 8.00 10 2 20.00 37.680 8 Tank shell 8th course A 36 12000 2500 8.00 10 2 20.00 37.680 9 Tank shell 9th course (Top) A 36 12000 2000 8.00 10 2 20.00 30.144
10 Tank Bottom Plate A 36 12000 2500 8.00 34 2 68.00 128.112 11 Annular plates A 36 12000 2500 8.00 6 2 12.00 22.608
12 Plate for RF pad of Nozzles & Manways SA 516 Gr.60 12000 2500 24.00 1 2 2.00 11.304 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 8.00 1 2 1.00 1.884 14 Plate for Nozzle neck A 36 12000 2500 14.00 1 2 2.00 6.594 15 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.15 2 0.30 1.272 16 Plate for wind girder A 36 12000 2500 8.00 2.19 2 4.38 8.252 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 2 6.00 7.065
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t (A) for 2 Tanks 782.435
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0202 0203 Page 70 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0202/0203 Tank Dia 36000 mm MDMT
PRODUCT HEAVY REFORMATE Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.817 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 113097 2 17.70 4.004 2 Stairways and platform A 36 11.15 2 22.300 3 Top wind girder / walkway A 36 19.79 2 39.580 4 Roof structure - 0.000 5 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 Gr.B 70000 - - 1.00 2 7.47 1.046 2 3" Pipe SA106 Gr.B 500 - - 1.00 2 15.26 0.015 3 4" Pipe SA106 Gr.B 500 - - 1.00 2 22.30 0.022 4 6" Pipe SA106 Gr.B 10100 - - 1.00 2 42.50 0.859 5 8" Pipe SA106 Gr.B 33000 - - 1.00 2 64.57 4.262
D Flange1 2" Nozzle - 150 # A 105 9 2 2.30 0.041 2 3" Nozzle - 150 # A 105 3 2 3.70 0.022 3 4" Nozzle - 150 # A 105 3 2 5.90 0.035 4 6" Nozzle - 150 # A 105 4 2 8.60 0.069 5 8" Nozzle - 150 # A 105 4 2 13.70 0.110 6 16" Nozzle - 150 # A 105 5 2 59.00 0.590 7 18" Nozzle - 150 # A 105 4 2 59.00 0.472
Total w.t (B+C+D) for 2 Tanks 78.427 Mt
Grand total (A+B+C+D) 2 Tanks 860.861 Mt
With 5% margin 2 Tanks 903.904 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0202 0203 Page 71 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium
Floating roof
J60-D-0202 0203 Page 72 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
not applicable
J60-D-0204 Page 73 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0204 Tank Dia 36000 mm MDMT
PRODUCT HCK medium cut Naptha Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.858 Des. Pres.
Corrosion allow. 1.6 mm
MTO MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.60 12000 2500 25.00 10 1 10.00 58.875 2 Tank shell 2nd course SA 516 Gr.60 12000 2500 22.00 10 1 10.00 51.810 3 Tank shell 3rd course A 36 12000 2500 18.00 10 1 10.00 42.390 4 Tank shell 4th course A 36 12000 2500 16.00 10 1 10.00 37.680 5 Tank shell 5th course A 36 12000 2500 14.00 10 1 10.00 32.970 6 Tank shell 6th course A 36 12000 2500 10.00 10 1 10.00 23.550 7 Tank shell 7th course A 36 12000 2500 8.00 10 1 10.00 18.840 8 Tank shell 8th course A 36 12000 2500 8.00 10 1 10.00 18.840 9 Tank shell 9th course (Top) A 36 12000 2000 8.00 10 1 10.00 15.072
10 Tank Bottom Plate A 36 12000 2500 8.00 34 1 34.00 64.056 11 Annular plates A 36 12000 2500 8.00 6 1 6.00 11.304
12 Plate for RF pad of Nozzles & Manways SA 516 Gr.60 12000 2500 25.00 1 1 1.00 5.888 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 8.00 1 1 1.00 1.884 14 Plate for Nozzle neck A 36 12000 2500 14.00 0.10 1 0.10 0.330 15 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.10 1 0.10 0.424 16 Plate for wind girder A 36 12000 2500 8.00 0.00 1 0.00 0.000 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 1 3.00 3.533
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t (A) for 1 Tanks 387.445
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0204 Page 74 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0204 Tank Dia 36000 mm MDMT
PRODUCT HCK medium cut Naptha Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.858 Des. Pres.
Corrosion allow. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 113097 1 17.70 2.002 2 Stairways and platform A 36 11.15 1 11.150 3 Top wind girder / walkway A 36 19.79 1 19.790 4 Roof structure A 36 0.000 5 Miscellaneous support 3.000
C Pipe1 2" Pipe SA106 Gr. B 70000 - - 1.00 1 7.47 0.523 2 3" Pipe SA106 Gr. B 500 - - 1.00 1 15.26 0.008 3 4" Pipe SA106 Gr. B 500 - - 1.00 1 22.30 0.011 4 6" Pipe SA106 Gr. B 103000 - - 1.00 1 42.50 4.378 5 8" Pipe SA106 Gr. B 33000 - - 1.00 1 64.57 2.131 D Flange1 2" Nozzle - 150 # A 105 9 1 2.30 0.021 2 3" Nozzle - 150 # A 105 3 1 3.70 0.011 3 4" Nozzle - 150 # A 105 3 1 5.90 0.018 4 6" Nozzle - 150 # A 105 2 1 8.60 0.017 5 8" Nozzle - 150 # A 105 3 1 13.70 0.041 6 12" Nozzle - 150 # A 105 2 1 29.00 0.058 7 16" Nozzle - 150 # A 105 1 1 54.00 0.054 8 18" Nozzle - 150 # A 105 1 1 59.00 0.059
Total w.t (B+C+D) for 1 Tank 43.271 Mt
Grand total (A+B+C+D) 1 Tank 430.715 Mt
With 5% margin 1 Tank 452.251 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0204 Page 75 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium
Floating roof
J60-D-0204 Page 76 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
J60-D-211& 212 Page 77 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0211,0212 Tank Dia 19000 mm MDMT
PRODUCT C7+ Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.813 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 12.00 5.00 2 10.00 28.260 2 Tank shell 2nd course A36 12000 2500 12.00 5.00 2 10.00 28.260 3 Tank shell 3rd course A 36 12000 2500 10.00 5.00 2 10.00 23.550 4 Tank shell 4th course A 36 12000 2500 8.00 5.00 2 10.00 18.840 5 Tank shell 5th course A 36 12000 2500 8.00 5.00 2 10.00 18.840 6 Tank shell 6th course A 36 12000 2500 6.00 5.00 2 10.00 14.130 7 Tank shell 7th course A 36 12000 2500 6.00 5.00 2 10.00 14.130 8 Tank shell 8th course A 36 12000 2500 6.00 5.00 2 10.00 14.130 9 Tank shell 9th course (Top) A 36 12000 2000 6.00 5.00 2 10.00 11.304
10 Tank Bottom Plate A 36 12000 2500 8.00 9.00 2 18.00 33.912 11 Annular plates A 36 12000 2500 8.00 4.00 2 8.00 15.072
12 Plate for RF pad of Nozzles & Manways A36 12000 2500 12.00 1.00 2 2.00 5.652 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 2 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 2 2.00 6.594 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 2 0.20 1.036 16 Plate for wind girder A 36 12000 2500 6.00 2.00 2 4.00 5.652 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 2 2.00 2.355
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t for 2 Tanks 242.895
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-211& 212 Page 78 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0211,0212 Tank Dia 19000 mm MDMT
PRODUCT C7+ Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.813 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 59690 2 17.70 2.113 2 Stairways and platform A 36 8.48 2 16.960 3 Top wind girder / walkway A 36 10.45 2 20.900 4 Roof structure A 36 0.000 5 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 GR B 81000 - - 1.00 2 7.47 1.210 2 3" Pipe SA106 GR B 525 - - 1.00 2 15.26 0.016 3 4" Pipe SA106 GR B 525 - - 1.00 2 22.30 0.023 4 6" Pipe SA106 GR B 400 - - 1.00 2 42.50 0.034 5 8" Pipe SA106 GR B 27000 - - 1.00 2 64.57 3.487 6 10" Pipe SA106 GR B 225 - - 1.00 2 81.46 0.037
D Flange1 2" Nozzle - 150 # A 105 4 2 2.30 0.018 2 3" Nozzle - 150 # A 105 4 2 3.70 0.030 3 4" Nozzle - 150 # A 105 3 2 5.90 0.035 4 6" Nozzle - 150 # A 105 2 2 8.60 0.034 5 8" Nozzle - 150 # A 105 1 2 13.70 0.027 6 10" Nozzle - 150 # A 105 1 2 19.50 0.039 7 12" Nozzle - 150 # A 105 1 2 29.00 0.058 8 Fittings, Bolts & Nuts A 105 1 2 2.000
Total w.t (B+C+D) for 2 Tank 52.022 Mt
Grand total (A+B+C+D) 2 Tank 294.917 Mt
With 10% margin 2 Tank 324.409 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-211& 212 Page 79 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-211& 212 Page 80 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
J60-D-0231 & 232 Page 81 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0231 / 0232 Tank Dia 21000 mm MDMT
PRODUCT C9+ Tank Ht 22000 mm Des. Tem.
Type: IFR with Alum. dome Specific gravity 0.86 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 14.00 5.50 2 11.00 36.267 2 Tank shell 2nd course A36 12000 2500 12.00 5.50 2 11.00 31.086 3 Tank shell 3rd course A 36 12000 2500 12.00 5.50 2 11.00 31.086 4 Tank shell 4th course A 36 12000 2500 10.00 5.50 2 11.00 25.905 5 Tank shell 5th course A 36 12000 2500 8.00 5.50 2 11.00 20.724 6 Tank shell 6th course A 36 12000 2500 6.00 5.50 2 11.00 15.543 7 Tank shell 7th course A 36 12000 2500 6.00 5.50 2 11.00 15.543 8 Tank shell 8th course A 36 12000 2500 6.00 5.50 2 11.00 15.543 9 Tank shell 9th course (Top) A 36 12000 2000 6.00 5.50 2 11.00 12.434
10 Tank Bottom Plate A 36 12000 2500 8.00 11.00 2 22.00 41.448 11 Annular plates A 36 12000 2500 8.00 4.00 2 8.00 15.072
12 Plate for RF pad of Nozzles & Manways A36 12000 2500 14.00 1.00 2 2.00 6.594 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1.00 2 1.00 1.413 14 Plate for Nozzle neck A 36 12000 2500 14.00 0.10 2 0.20 0.659 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 2 0.20 1.036 16 Plate for wind girder A 36 12000 2500 6.00 1.00 2 2.00 2.826 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 2 6.00 7.065
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t (A) for 2 Tanks 280.245
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0231 & 232 Page 82 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0231 / 0232 Tank Dia 21000 mm MDMT
PRODUCT C9+ Tank Ht 22000 mm Des. Tem.
Type: IFR with Alum. dome Specific gravity 0.86 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 65973 2 17.70 2.335 2 Stairways and platform A 36 8.80 2 17.600 3 Top wind girder / walkway A 36 11.55 2 23.100 4 Roof structure A 36 0.000 5 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 GR B 870000 - - 1.00 2 7.47 12.998 3 4" Pipe SA106 GR B 2000 - - 1.00 2 22.30 0.089 4 6" Pipe SA106 GR B 1500 - - 1.00 2 42.50 0.128 5 8" Pipe SA106 GR B 23000 - - 1.00 2 64.57 2.970 5 10" Pipe SA106 GR B 500 - - 1.00 2 95.85 0.096
D Flange1 2" Nozzle - 150 # A 105 5 2 2.30 0.023 2 4" Nozzle - 150 # A 105 3 2 5.90 0.035 3 6" Nozzle - 150 # A 105 5 2 8.60 0.086 4 8" Nozzle - 150 # A 105 2 2 19.50 0.078 5 10" Nozzle - 150 # A 105 1 2 13.70 0.027 6 12" Nozzle - 150 # A 105 1 2 29.90 0.060 7 Fittings, Bolts & Nuts A 105 2 1.000
Total w.t (B+C+D) for 1 Tank 65.626 Mt
Grand total (A+B+C+D) 1 Tank 345.871 Mt
With 10% margin 1 Tank 380.458 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0231 & 232 Page 83 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
Floating roof
Considering Aluminium Floating
roof
J60-D-0231 & 232 Page 84 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
J60-D-0251-0252 Page 85 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0251/0252 Tank Dia 41000 mm MDMT
PRODUCT MTBE Storage Tank Ht 22000 mm Des. Tem.
Type: IFR with Alumin. dome Specific gravity 0.736 Des. Pres.
Corrosion allowance 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.60 12000 2500 28.00 11.00 2 22.00 145.068 2 Tank shell 2nd course SA 516 Gr.60 12000 2500 25.00 11.00 2 22.00 129.525 3 Tank shell 3rd course A 36 12000 2500 20.00 11.00 2 22.00 103.620 4 Tank shell 4th course A 36 12000 2500 18.00 11.00 2 22.00 93.258 5 Tank shell 5th course A 36 12000 2500 14.00 11.00 2 22.00 72.534 6 Tank shell 6th course A 36 12000 2500 12.00 11.00 2 22.00 62.172 7 Tank shell 7th course A 36 12000 2500 8.00 11.00 2 22.00 41.448 8 Tank shell 8th course A 36 12000 2500 8.00 11.00 2 22.00 41.448 9 Tank shell 9th course (Top) A 36 12000 2000 8.00 11.00 2 22.00 33.158
10 Tank Bottom Plate A 36 12000 2500 8.00 43.00 2 86.00 162.024 11 Annular plates A 36 12000 2500 8.00 6.00 2 12.00 22.608
12 Plate for RF pad of Nozzles & Manways SA 516 Gr.60 12000 2500 28.00 1.00 2 2.00 13.188 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 8.00 1.00 2 2.00 3.768 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 2 2.00 6.594 15 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.10 2 0.20 0.848 16 Plate for wind girder A 36 12000 2500 8.00 2.19 2 4.38 8.252
17 Miscellaneous - Platform & Stair A 36 12000 2500 5.00 3.00 2 6.00 7.065
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t (A) for 2 Tanks 946.578
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0251-0252 Page 86 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0251/0252 Tank Dia 41000 mm MDMT
PRODUCT MTBE Storage Tank Ht 22000 mm Des. Tem.
Type: IFR with Alumin. dome Specific gravity 0.736 Des. Pres.
Corrosion allowance 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 128805 2 17.70 4.560 2 Stairways and platform A 36 11.94 2 23.880 3 Top wind girder / walkway A 36 22.94 2 45.880 4 Roof structure A 36 0.000 5 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 Gr B 70000 - - 1.00 2 7.47 1.046 2 3" Pipe SA106 Gr B 500 - - 1.00 2 15.26 0.015 3 4" Pipe SA106 Gr B 500 - - 1.00 2 22.30 0.022 4 6" Pipe SA106 Gr B 106000 - - 1.00 2 42.50 9.010 5 8" Pipe SA106 Gr B 33000 - - 1.00 2 64.57 4.262
D Flange1 2" Nozzle - 150 # A 105 8 2 2.30 0.037 2 3" Nozzle - 150 # A 105 3 2 3.70 0.022 3 4" Nozzle - 150 # A 105 2 2 5.90 0.024 4 6" Nozzle - 150 # A 105 2 2 8.60 0.034 5 12" Nozzle - 150 # A 105 6 2 29.00 0.348
Total w.t (B+C+D) for 2 Tanks 94.140 Mt
Grand total (A+B+C+D) 2 Tanks 1040.718 Mt
With 5% margin 2 Tanks 1092.754 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0251-0252 Page 87 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
MTO
Total PriceRemarks
USD
Considering Aluminium Floating
roof
J60-D-0251-0252 Page 88 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
J60-D-0261 0262 Page 89 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0261,0262 Tank Dia 14000 mm MDMT
PRODUCT HYDRO. MED.NAPHTHA Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.694 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 10.00 4.00 2 8.00 18.840 2 Tank shell 2nd course A36 12000 2500 8.00 4.00 2 8.00 15.072 3 Tank shell 3rd course A 36 12000 2500 8.00 4.00 2 8.00 15.072 4 Tank shell 4th course A 36 12000 2500 6.00 4.00 2 8.00 11.304 5 Tank shell 5th course A 36 12000 2500 5.00 4.00 2 8.00 9.420 6 Tank shell 6th course A 36 12000 2500 5.00 4.00 2 8.00 9.420 7 Tank shell 7th course A 36 12000 2500 5.00 4.00 2 8.00 9.420 8 Tank shell 8th course A 36 12000 2500 5.00 4.00 2 8.00 9.420 9 Tank shell 9th course (Top) A 36 12000 2000 5.00 4.00 2 8.00 7.536
10 Tank Bottom Plate A 36 12000 2500 8.00 5.00 2 10.00 18.840 11 Annular plates A 36 12000 2500 8.00 4.00 2 8.00 15.072
12 Plate for RF pad of Nozzles & Manways A36 12000 2500 10.00 1.00 2 2.00 4.710 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 2 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 2 2.00 6.594 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 2 0.20 1.036 16 Plate for wind girder A 36 12000 2500 6.00 1.00 2 2.00 2.826 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 2 2.00 2.355
Floating roof- Double deck18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t for 2 Tanks 158.115
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0261 0262 Page 90 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0261,0262 Tank Dia 14000 mm MDMT
PRODUCT HYDRO. MED.NAPHTHA Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.694 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 43982 2 17.70 1.557 2 Stairways and platform A 36 7.70 2 15.400 3 Top wind girder / walkway A 36 7.70 2 15.400 4 Roof structure - 0.000 5 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 Gr.B 78000 - - 1.00 2 7.47 1.165 2 3" Pipe SA106 Gr.B 875 - - 1.00 2 15.26 0.027 3 4" Pipe SA106 Gr.B 600 - - 1.00 2 22.30 0.027 4 6" Pipe SA106 Gr.B 400 - - 1.00 2 42.50 0.034 5 8" Pipe SA106 Gr.B 26000 - - 1.00 2 64.57 3.358 6 12" Pipe SA106 Gr.B 225 - - 1.00 2 97.36 0.044
D Flange1 2" Nozzle - 150 # A 105 4 2 2.30 0.018 2 3" Nozzle - 150 # A 105 4 2 3.70 0.030 3 4" Nozzle - 150 # A 105 3 2 5.90 0.035 4 6" Nozzle - 150 # A 105 2 2 8.60 0.034 5 8" Nozzle - 150 # A 105 1 2 13.70 0.027 6 12" Nozzle - 150 # A 105 1 2 29.00 0.058 8 Fittings, Bolts & Nuts A 105 1 2 2.000
Total w.t (B+C+D) for 2 Tanks 44.214 Mt
Grand total (A+B+C+D) 2 Tanks 202.329 Mt
With 10% margin 2 Tanks 222.562 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0261 0262 Page 91 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0261 0262 Page 92 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
NA
J60-D-0301 to 0303 Page 93 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0301 TO 0303 Tank Dia 65000 mm MDMT
PRODUCT 91 GASOLINE Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.749 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr. 70 12000 2500 34.00 17.33 3 52.00 416.356 2 Tank shell 2nd course SA 516 Gr. 70 12000 2500 30.00 17.33 3 52.00 367.373 3 Tank shell 3rd course SA 516 Gr. 70 12000 2500 25.00 17.33 3 52.00 306.144 4 Tank shell 4th course SA 516 Gr. 70 12000 2500 22.00 17.33 3 52.00 269.407 5 Tank shell 5th course SA 516 Gr. 70 12000 2500 18.00 17.33 3 52.00 220.424 6 Tank shell 6th course A 36 12000 2500 16.00 17.33 3 52.00 195.932 7 Tank shell 7th course A 36 12000 2500 10.00 17.33 3 52.00 122.458 8 Tank shell 8th course A 36 12000 2500 10.00 17.33 3 52.00 122.458 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 17.33 3 52.00 97.966
10 Tank Bottom Plate A 36 12000 2500 8.00 111.00 3 333.00 627.372 11 Annular plates A 36 12000 2500 14.00 9.00 3 27.00 89.019
12 Plate for RF pad of Nozzles & Manways SA 516 Gr. 70 12000 2500 34.00 1.00 3 3.00 24.021 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 3 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 3 3.00 9.891 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 3 0.30 1.554 16 Plate for wind girder A 36 12000 2500 6.00 7.00 3 21.00 29.673 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 2.00 3 6.00 7.065
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t for 3 Tanks 2908.290
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0301 to 0303 Page 94 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0301 TO 0303 Tank Dia 65000 mm MDMT
PRODUCT 91 GASOLINE Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.749 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 204204 3 17.70 10.843 2 Stairways and platform A 36 6.61 3 19.830 3 Top wind girder / walkway A 36 35.00 3 105.000 4 Roof structure - 0.000 5 Miscellaneous support 10.000
C Pipe1 2" Pipe SA106 GR B 115000 - - 1.00 3 7.47 2.577 2 3" Pipe SA106 GR B 175 - - 1.00 3 15.26 0.008 3 6" Pipe SA106 GR B 600 - - 1.00 3 42.50 0.077 4 8" Pipe SA106 GR B 39000 - - 1.00 3 64.57 7.555 5 10" Pipe SA106 GR B 450 - - 1.00 3 81.46 0.110
D Flange1 2" Nozzle - 150 # A 105 5 3 2.30 0.035 2 3" Nozzle - 150 # A 105 2 3 3.70 0.022 3 6" Nozzle - 150 # A 105 4 3 8.60 0.103 4 8" Nozzle - 150 # A 105 2 3 13.70 0.082 5 10" Nozzle - 150 # A 105 2 3 19.50 0.117 7 14" Nozzle - 150 # A 105 1 3 41.00 0.123 8 18" Nozzle - 150 # A 105 1 3 59.00 0.177 9 24" Nozzle - 150 # A 105 1 3 100.00 0.300
10 38" Nozzle - 150 # A 105 1 3 230.00 0.690 11 Fittings, Bolts & Nuts A 105 1 3 3.000
Total w.t (B+C+D) for 3 Tanks 160.649 Mt
Grand total (A+B+C+D) 3 Tanks 3068.939 Mt
With 5% margin 3 Tanks 3222.386 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0301 to 0303 Page 95 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0301 to 0303 Page 96 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
1 kPa
NA
J60-D-0305 Page 97 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0305 Tank Dia 65000 mm MDMT
PRODUCT 91 GAS / 95 GASOLINE Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.749 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.70 12000 2500 34.00 18.00 1 18.00 144.126 2 Tank shell 2nd course SA 516 Gr.70 12000 2500 30.00 18.00 1 18.00 127.170 3 Tank shell 3rd course SA 516 Gr.70 12000 2500 25.00 18.00 1 18.00 105.975 4 Tank shell 4th course SA 516 Gr.70 12000 2500 22.00 18.00 1 18.00 93.258 5 Tank shell 5th course SA 516 Gr.70 12000 2500 18.00 18.00 1 18.00 76.302 6 Tank shell 6th course A 36 12000 2500 16.00 18.00 1 18.00 67.824 7 Tank shell 7th course A 36 12000 2500 10.00 18.00 1 18.00 42.390 8 Tank shell 8th course A 36 12000 2500 10.00 18.00 1 18.00 42.390 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 18.00 1 18.00 33.912
10 Tank Bottom Plate A 36 12000 2500 8.00 111.00 1 111.00 209.124 11 Annular plates A 36 12000 2500 14.00 10.00 1 10.00 32.970
12 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 34.00 1.00 1 1.00 8.007 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 1 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 1 1.00 3.297 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 1 0.10 0.518 16 Plate for wind girder A 36 12000 2500 6.00 7.00 1 7.00 9.891 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 2.00 1 2.00 2.355
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t for 1 Tanks 1,000.687
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0305 Page 98 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0305 Tank Dia 65000 mm MDMT
PRODUCT 91 GAS / 95 GASOLINE Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.749 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 204204 1 17.70 3.614 2 Stairways and platform A 36 6.61 1 6.610 3 Top wind girder / walkway A 36 35.00 1 35.000 4 Roof structure - 0.000 5 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 Gr.B 115000 - - 1.00 1 7.47 0.859 2 3" Pipe SA106 Gr.B 175 - - 1.00 1 15.26 0.003 3 6" Pipe SA106 Gr.B 600 - - 1.00 1 42.50 0.026 4 8" Pipe SA106 Gr.B 39000 - - 1.00 1 64.57 2.518 5 10" Pipe SA106 Gr.B 450 - - 1.00 1 81.46 0.037
D Flange1 2" Nozzle - 150 # A 105 5 1 2.30 0.012 2 3" Nozzle - 150 # A 105 2 1 3.70 0.007 3 6" Nozzle - 150 # A 105 4 1 8.60 0.034 4 8" Nozzle - 150 # A 105 2 1 13.70 0.027 5 10" Nozzle - 150 # A 105 2 1 19.50 0.039 7 14" Nozzle - 150 # A 105 1 1 41.00 0.041 8 18" Nozzle - 150 # A 105 1 1 59.00 0.059 9 24" Nozzle - 150 # A 105 1 1 100.00 0.100
10 38" Nozzle - 150 # A 105 1 1 230.00 0.230 11 Fittings, Bolts & Nuts A 105 1 1 3.000
Total w.t (B+C+D) for 1 Tank 57.216 Mt
Grand total (A+B+C+D) 1 Tank 1057.903 Mt
With 5% margin 1 Tank 1110.798 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0305 Page 99 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0305 Page 100 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
NA
J60-D-0311-0312-0313 Page 101 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0311/0312/0313 Tank Dia 36000 mm MDMT
PRODUCT 95 Gasoline Tank Ht 22000 mm Des. Tem.
Type: IFR with Alumi. dome Specific gravity 0.757 Des. Pres.
Corrosion allowance 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.60 12000 2500 25.00 10 3 30.00 176.625 2 Tank shell 2nd course SA 516 Gr.60 12000 2500 22.00 10 3 30.00 155.430 3 Tank shell 3rd course A 36 12000 2500 18.00 10 3 30.00 127.170 4 Tank shell 4th course A 36 12000 2500 16.00 10 3 30.00 113.040 5 Tank shell 5th course A 36 12000 2500 14.00 10 3 30.00 98.910 6 Tank shell 6th course A 36 12000 2500 10.00 10 3 30.00 70.650 7 Tank shell 7th course A 36 12000 2500 8.00 10 3 30.00 56.520 8 Tank shell 8th course A 36 12000 2500 8.00 10 3 30.00 56.520 9 Tank shell 9th course (Top) A 36 12000 2000 8.00 10 3 30.00 45.216
10 Tank Bottom Plate A 36 12000 2500 8.00 34 3 102.00 192.168 11 Annular plates A 36 12000 2500 8.00 6 3 18.00 33.912
12 Plate for RF pad of Nozzles & Manways SA 516 Gr.60 12000 2500 25.00 1 3 3.00 17.663 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 8.00 1 3 1.00 1.884 14 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 3 1.50 4.946 15 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.10 3 0.30 1.272 16 Plate for wind girder A 36 12000 2500 8.00 0.00 3 0.00 0.000 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 3 9.00 10.598
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t (A) for 3 Tanks 1162.522
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0311-0312-0313 Page 102 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0311/0312/0313 Tank Dia 36000 mm MDMT
PRODUCT 95 Gasoline Tank Ht 22000 mm Des. Tem.
Type: IFR with Alumi. dome Specific gravity 0.757 Des. Pres.
Corrosion allowance 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 113097 3 17.70 6.0052 Stairways and platform A 36 11.15 3 33.4503 Top wind girder / walkway A 36 19.79 3 59.3704 Roof structure - 0.0005 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 GR B 71000 - - 1.00 3 7.47 1.5912 3" Pipe SA106 GR B 500 - - 1.00 3 15.26 0.0233 4" Pipe SA106 GR B 500 - - 1.00 3 22.30 0.0334 6" Pipe SA106 GR B 103000 - - 1.00 3 42.50 13.1335 8" Pipe SA106 GR B 33000 - - 1.00 3 64.57 6.392
D Flange1 2" Nozzle - 150 # A 105 10 3 2.30 0.0692 3" Nozzle - 150 # A 105 3 3 3.70 0.0333 4" Nozzle - 150 # A 105 4 3 5.90 0.0714 6" Nozzle - 150 # A 105 2 3 8.60 0.0525 8" Nozzle - 150 # A 105 3 3 13.70 0.1235 12" Nozzle - 150 # A 105 2 3 29.00 0.1746 16" Nozzle - 150 # A 105 2 3 41.00 0.2467 18" Nozzle - 150 # A 105 6 3 59.00 1.0628 38" Nozzle - 150 # A 105 2 3 205.00 1.230
Total w.t (B+C+D) for 3 Tanks 128.058 Mt
Grand total (A+B+C+D) 3 Tanks 1290.580 Mt
With 5% margin 3 Tanks 1355.109 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0311-0312-0313 Page 103 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0311-0312-0313 Page 104 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
NA
J60-D-0401 402 & 405 Page 105 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0401 , 402 & 0405 Tank Dia 29000 mm MDMT
PRODUCT Benzene Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.88 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 20.00 8.00 3 24.00 113.040 2 Tank shell 2nd course A36 12000 2500 18.00 8.00 3 24.00 101.736 3 Tank shell 3rd course A 36 12000 2500 14.00 8.00 3 24.00 79.128 4 Tank shell 4th course A 36 12000 2500 12.00 8.00 3 24.00 67.824 5 Tank shell 5th course A 36 12000 2500 10.00 8.00 3 24.00 56.520 6 Tank shell 6th course A 36 12000 2500 8.00 8.00 3 24.00 45.216 7 Tank shell 7th course A 36 12000 2500 6.00 8.00 3 24.00 33.912 8 Tank shell 8th course A 36 12000 2500 6.00 8.00 3 24.00 33.912 9 Tank shell 9th course (Top) A 36 12000 2000 6.00 8.00 3 24.00 27.130
10 Tank Bottom Plate A 36 12000 2500 8.00 22.00 3 66.00 124.344 11 Annular plates A 36 12000 2500 8.00 5.00 3 15.00 28.260
12 Plate for RF pad of Nozzles & Manways A 36 12000 2500 20.00 1.00 3 3.00 14.130 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1.00 3 1.00 1.413 14 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 3 1.50 4.946 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 3 0.30 1.554 16 Plate for wind girder A 36 12000 2500 8.00 1.00 3 3.00 5.652 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 3 9.00 10.598
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t (A) for 3 Tanks 749.314
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0401 402 & 405 Page 106 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0401 , 402 & 0405 Tank Dia 29000 mm MDMT
PRODUCT Benzene Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.88 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 91106 3 17.70 4.838 2 Stairways and platform A 36 10.06 3 30.180 3 Top wind girder / walkway A 36 15.94 3 47.820 4 Roof structure - 0.000 5 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 GR B 70000 - - 1.00 3 7.47 1.569 3 4" Pipe SA106 GR B 2000 - - 1.00 3 22.30 0.134 4 6" Pipe SA106 GR B 5000 - - 1.00 3 42.50 0.638 5 8" Pipe SA106 GR B 23000 - - 1.00 3 64.57 4.455 5 10" Pipe SA106 GR B 500 - - 1.00 3 95.85 0.144
D Flange1 2" Nozzle - 150 # A 105 7 3 2.30 0.048 2 4" Nozzle - 150 # A 105 3 3 5.90 0.053 3 6" Nozzle - 150 # A 105 6 3 8.60 0.155 4 8" Nozzle - 150 # A 105 8 3 19.50 0.468 5 10" Nozzle - 150 # A 105 1 3 13.70 0.041 6 12" Nozzle - 150 # A 105 1 3 29.90 0.090 7 16" Nozzle - 150 # A 105 1 3 54.00 0.162 8 Fittings, Bolts & Nuts A 105 3 3.000
Total w.t (B+C+D) for 3 Tank 98.794 Mt
Grand total (A+B+C+D) 3 Tank 848.108 Mt
With 10% margin 3 Tank 932.919 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0401 402 & 405 Page 107 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0401 402 & 405 Page 108 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
NA
J60-D-0403&0404 Page 109 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0403 & 0404 Tank Dia 8000 mm MDMT
PRODUCT Benzene Tank Ht 22000 mm Des. Tem.
Type: IFR with Cone roof Specific gravity 0.88 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 8.00 2.50 2 5.00 9.420 2 Tank shell 2nd course A36 12000 2500 6.00 2.50 2 5.00 7.065 3 Tank shell 3rd course A 36 12000 2500 5.00 2.50 2 5.00 5.888 4 Tank shell 4th course A 36 12000 2500 5.00 2.50 2 5.00 5.888 5 Tank shell 5th course A 36 12000 2500 5.00 2.50 2 5.00 5.888 6 Tank shell 6th course A 36 12000 2500 5.00 2.50 2 5.00 5.888 7 Tank shell 7th course A 36 12000 2500 5.00 2.50 2 5.00 5.888 8 Tank shell 8th course A 36 12000 2500 5.00 2.50 2 5.00 5.888 9 Tank shell 9th course (Top) A 36 12000 2000 5.00 2.50 2 5.00 4.710
10 Tank Bottom Plate A 36 12000 2500 8.00 1.50 2 3.00 5.652 11 Annular plates A 36 12000 2500 8.00 1.00 2 2.00 3.768 12 Roof plate A 36 12000 2500 8.00 1.87 2 3.74 7.046
13 Plate for RF pad of Nozzles & Manways A36 12000 2500 8.00 1.00 2 2.00 3.768 14 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1.00 2 1.00 1.413 15 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 2 1.00 3.297 16 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 2 0.20 1.036 17 Plate for wind girder A 36 12000 2500 6.00 2.00 2 4.00 5.652 18 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 2 2.00 2.355
Floating roof- Double Deck19 Plate for Deck20 Plate for Rim outside21 Plate for Rim inside22 Compartment plate23 Pontoon cover plate24 Plate for Deck structural25 Plate for foam dam rim26 Plate for foam dam chamber27 Leg wear plate28 Deck manhole29 Compartment manhole
Total w.t (A) for 2 Tanks 90.507
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0403&0404 Page 110 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0403 & 0404 Tank Dia 8000 mm MDMT
PRODUCT Benzene Tank Ht 22000 mm Des. Tem.
Type: IFR with Cone roof Specific gravity 0.88 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 25133 2 17.70 0.890 2 Stairways and platform A 36 2.00 2 4.000 3 Roof structure A 36 4.00 2 8.000 4 Miscellaneous support 1.500
C Pipe1 2" Pipe SA106 GR B 66500 - - 1.00 2 7.47 0.994 2 3" Pipe SA106 GR B 500 - - 1.00 2 15.26 0.015 3 4" Pipe SA106 GR B 27000 - - 1.00 2 22.30 1.204 4 6" Pipe SA106 GR B 1000 - - 1.00 2 42.50 0.085 5 8" Pipe SA106 GR B 23000 - - 1.00 2 64.57 2.970
D Flange1 2" Nozzle - 150 # A 105 9 2 2.30 0.041 2 4" Nozzle - 150 # A 105 5 2 5.90 0.059 3 6" Nozzle - 150 # A 105 3 2 8.60 0.052 4 8" Nozzle - 150 # A 105 2 2 19.50 0.078 5 12" Nozzle - 150 # A 105 1 2 29.90 0.060 6 Fittings, Bolts & Nuts A 105 2 1.000
Total w.t (B+C+D) for 2 Tank 20.948 Mt
Grand total (A+B+C+D) 2 Tank 20.948 Mt
With 10% margin 2 Tank 23.042 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0403&0404 Page 111 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0403&0404 Page 112 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
J60-D-0501-0502-0505 Page 113 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0501/0502 /0505 Tank Dia 41000 mm MDMT
PRODUCT Paraxylene Tank Ht 22000 mm Des. Tem.
Type: IFR with Alumin. dome Specific gravity 0.865 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.60 12000 2500 28.00 11.0 3 33.00 217.602 2 Tank shell 2nd course SA 516 Gr.60 12000 2500 25.00 11.0 3 33.00 194.288 3 Tank shell 3rd course A 36 12000 2500 20.00 11.0 3 33.00 155.430 4 Tank shell 4th course A 36 12000 2500 18.00 11.0 3 33.00 139.887 5 Tank shell 5th course A 36 12000 2500 14.00 11.0 3 33.00 108.801 6 Tank shell 6th course A 36 12000 2500 12.00 11.0 3 33.00 93.258 7 Tank shell 7th course A 36 12000 2500 8.00 11.0 3 33.00 62.172 8 Tank shell 8th course A 36 12000 2500 8.00 11.0 3 33.00 62.172 9 Tank shell 9th course (Top) A 36 12000 2000 8.00 11.0 3 33.00 49.738
10 Tank Bottom Plate A 36 12000 2500 8.00 43 3 129.00 243.036 11 Annular plates A36 12000 2500 8.00 6 3 18.00 33.912
12 Plate for RF pad of Nozzles & Manways SA 516 Gr.60 12000 2500 28.00 1 3 3.00 19.782 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 8.00 1 3 1.00 1.884 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 3 3.00 9.891 15 Plate for manway cover / bolting flange A 36 12000 2500 18.00 0.15 3 0.45 1.908 16 Plate for wind girder A 36 12000 2500 8.00 2.19 3 6.57 12.378 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 3 9.00 10.598
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t (A) for 3 Tanks 1416.735
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0501-0502-0505 Page 114 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0501/0502 /0505 Tank Dia 41000 mm MDMT
PRODUCT Paraxylene Tank Ht 22000 mm Des. Tem.
Type: IFR with Alumin. dome Specific gravity 0.865 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 128805 3 17.70 6.840 2 Stairways and platform A 36 11.94 3 35.820 3 Top wind girder / walkway A 36 22.54 3 67.620 4 Roof structure - 0.000 5 Miscellaneous support 6.000
C Pipe1 2" Pipe SA106 Gr. B 71000 - - 1.00 3 7.47 1.591 2 3" Pipe SA106 Gr. B 500 - - 1.00 3 15.26 0.023 3 4" Pipe SA106 Gr. B 500 - - 1.00 3 22.30 0.033 4 6" Pipe SA106 Gr. B 63000 - - 1.00 3 42.50 8.033 5 8" Pipe SA106 Gr. B 33000 - - 1.00 3 64.57 6.392
D Flange1 2" Nozzle - 150 # A 105 12 3 2.30 0.083 2 3" Nozzle - 150 # A 105 4 3 3.70 0.044 3 4" Nozzle - 150 # A 105 4 3 5.90 0.071 4 6" Nozzle - 150 # A 105 4 3 8.60 0.103 5 8" Nozzle - 150 # A 105 2 3 13.70 0.082 7 18" Nozzle - 150 # A 105 6 3 59.00 1.062 8 38" Nozzle - 150 # A 105 3 3 205.00 1.845
Total w.t (B+C+D) for 3 Tanks 135.642 Mt
Grand total (A+B+C+D) 3 Tanks 1552.377 Mt
With 10% margin 3 Tanks 1707.615 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0501-0502-0505 Page 115 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0501/0502 /0505 Tank Dia 41000 mm MDMT
PRODUCT Paraxylene Tank Ht 22000 mm Des. Tem.
Type: IFR with Alumin. dome Specific gravity 0.865 Des. Pres.
Corrosion Allowa. 1.6 mm
J60-D-0501-0502-0505 Page 116 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
93 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0501-0502-0505 Page 117 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
93 Deg. C
3 kPa
NA
J60-D-0501-0502-0505 Page 118 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
93 Deg. C
3 kPa
J60-D-0503 & 504 Page 119 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0503 504 Tank Dia 14000 mm MDMT
PRODUCT paraxylene Tank Ht 22000 mm Des. Tem.
Type: IFR with Alumin. dome Specific gravity 0.865 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 10.00 4.00 2 8.00 18.840 2 Tank shell 2nd course A36 12000 2500 10.00 4.00 2 8.00 18.840 3 Tank shell 3rd course A 36 12000 2500 8.00 4.00 2 8.00 15.072 4 Tank shell 4th course A 36 12000 2500 8.00 4.00 2 8.00 15.072 5 Tank shell 5th course A 36 12000 2500 6.00 4.00 2 8.00 11.304 6 Tank shell 6th course A 36 12000 2500 5.00 4.00 2 8.00 9.420 7 Tank shell 7th course A 36 12000 2500 5.00 4.00 2 8.00 9.420 8 Tank shell 8th course A 36 12000 2500 5.00 4.00 2 8.00 9.420 9 Tank shell 9th course (Top) A 36 12000 2000 5.00 4.00 2 8.00 7.536
10 Tank Bottom Plate A 36 12000 2500 8.00 5.00 2 10.00 18.840 11 Annular plates A 36 12000 2500 8.00 4.00 2 8.00 15.072
12 Plate for RF pad of Nozzles & Manways A 36 12000 2500 10.00 1.00 2 2.00 4.710 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 2 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 2 2.00 6.594 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 2 0.20 1.036 16 Plate for wind girder A 36 12000 2500 6.00 2.25 2 4.50 6.359 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 2 2.00 2.355
Floating roof - Douple Deck18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t for 2 Tanks 171.067
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0503 & 504 Page 120 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0503 504 Tank Dia 14000 mm MDMT
PRODUCT paraxylene Tank Ht 22000 mm Des. Tem.
Type: IFR with Alumin. dome Specific gravity 0.865 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 43982 2 17.70 1.557 2 Stairways and platform A 36 6.61 2 13.220 3 Top wind girder / walkway A 36 7.70 2 15.400 4 Roof structure - 0.000 5 Miscellaneous support 2.000
C Pipe1 2" Pipe SA106 GR B 85000 - - 1.00 2 7.47 1.270 3 4" Pipe SA106 GR B 525 - - 1.00 2 22.30 0.023 4 6" Pipe SA106 GR B 9000 - - 1.00 2 42.50 0.765 5 8" Pipe SA106 GR B 28000 - - 1.00 2 64.57 3.616 6 10" Pipe SA106 GR B 500 - - 1.00 2 81.46 0.081
D Flange1 2" Nozzle - 150 # A 105 8 2 2.30 0.037 2 4" Nozzle - 150 # A 105 1 2 5.90 0.012 3 6" Nozzle - 150 # A 105 6 2 8.60 0.103 4 8" Nozzle - 150 # A 105 1 2 13.70 0.027 5 10" Nozzle - 150 # A 105 1 2 19.50 0.039 6 18" Nozzle - 150 # A 105 2 2 59.00 0.236 7 Fittings, Bolts & Nuts A 105 1 2 2.000
Total w.t (B+C+D) for 2 Tanks 40.387 Mt
Grand total (A+B+C+D) 2 Tanks 40.387 Mt
With 10% margin 2 Tanks 44.426 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0503 & 504 Page 121 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0503 & 504 Page 122 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
NA
J60-D-0506 Page 123 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0506 Tank Dia 14000 mm MDMT
PRODUCT Off spec bene. / paraxyl Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.865 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 10.00 4.00 1 4.00 9.420 2 Tank shell 2nd course A36 12000 2500 10.00 4.00 1 4.00 9.420 3 Tank shell 3rd course A 36 12000 2500 8.00 4.00 1 4.00 7.536 4 Tank shell 4th course A 36 12000 2500 8.00 4.00 1 4.00 7.536 5 Tank shell 5th course A 36 12000 2500 6.00 4.00 1 4.00 5.652 6 Tank shell 6th course A 36 12000 2500 5.00 4.00 1 4.00 4.710 7 Tank shell 7th course A 36 12000 2500 5.00 4.00 1 4.00 4.710 8 Tank shell 8th course A 36 12000 2500 5.00 4.00 1 4.00 4.710 9 Tank shell 9th course (Top) A 36 12000 2000 5.00 4.00 1 4.00 3.768
10 Tank Bottom Plate A 36 12000 2500 8.00 4.38 1 4.38 8.252 11 Annular plates A 36 12000 2500 8.00 4.00 1 4.00 7.536
12 Plate for RF pad of Nozzles & Manways A 36 12000 2500 10.00 1.00 1 1.00 2.355 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 1 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 1 1.00 3.297 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 1 0.10 0.518 16 Plate for wind girder A 36 12000 2500 6.00 2.25 1 2.25 3.179 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 1 1.00 1.178
Floating roof18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t for 1 Tanks 84.954
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0506 Page 124 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0506 Tank Dia 14000 mm MDMT
PRODUCT Off spec bene. / paraxyl Tank Ht 22000 mm Des. Tem.
Type: IFR with Aluminium dome Specific gravity 0.865 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 43982 1 17.70 0.778 2 Stairways and platform A 36 6.61 1 6.610 3 Top wind girder / walkway A 36 7.70 1 7.700 4 Roof structure - 0.000 5 Miscellaneous support 2.000
C Pipe1 2" Pipe SA106 GR B 85000 - - 1.00 1 7.47 0.635 3 4" Pipe SA106 GR B 525 - - 1.00 1 22.30 0.012 4 6" Pipe SA106 GR B 9000 - - 1.00 1 42.50 0.383 5 8" Pipe SA106 GR B 28000 - - 1.00 1 64.57 1.808 6 10" Pipe SA106 GR B 500 - - 1.00 1 81.46 0.041
D Flange1 2" Nozzle - 150 # A 105 8 1 2.30 0.018 2 4" Nozzle - 150 # A 105 1 1 5.90 0.006 3 6" Nozzle - 150 # A 105 6 1 8.60 0.052 4 8" Nozzle - 150 # A 105 1 1 13.70 0.014 5 10" Nozzle - 150 # A 105 1 1 19.50 0.020 6 20" Nozzle - 150 # A 105 2 1 75.00 0.150 7 Fittings, Bolts & Nuts A 105 2 1 2.000
Total w.t (B+C+D) for 1 Tanks 22.225 Mt
Grand total (A+B+C+D) 1 Tanks 107.180 Mt
With 10% margin 1 Tanks 117.898 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0506 Page 125 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
93 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0506 Page 126 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
93 Deg. C
3 kPa
NA
J60-D-0511 Page 127 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0511 Tank Dia 13000 mm MDMT
PRODUCT MIX XYLENE Tank Ht 22000 mm Des. Tem.
Type: IFR with Alum. dome Specific gravity 0.837 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 10.00 4.00 1 4.00 9.420 2 Tank shell 2nd course A36 12000 2500 8.00 4.00 1 4.00 7.536 3 Tank shell 3rd course A 36 12000 2500 8.00 4.00 1 4.00 7.536 4 Tank shell 4th course A 36 12000 2500 8.00 4.00 1 4.00 7.536 5 Tank shell 5th course A 36 12000 2500 6.00 4.00 1 4.00 5.652 6 Tank shell 6th course A 36 12000 2500 5.00 3.50 1 3.50 4.121 7 Tank shell 7th course A 36 12000 2500 5.00 3.50 1 3.50 4.121 8 Tank shell 8th course A 36 12000 2500 5.00 3.50 1 3.50 4.121 9 Tank shell 9th course (Top) A 36 12000 2000 5.00 3.50 1 3.50 3.297
10 Tank Bottom Plate A 36 12000 2500 8.00 4.00 1 4.00 7.536 11 Annular plates A 36 12000 2500 8.00 2.00 1 2.00 3.768
12 Plate for RF pad of Nozzles & Manways A 36 12000 2500 10.00 1.00 1 1.00 2.355 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 1 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 1 1.00 3.297 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 1 0.10 0.518 16 Plate for wind girder A 36 12000 2500 6.00 1.00 1 1.00 1.413 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 1 1.00 1.178
Floating roof - Double Deck18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t for 1 Tanks 74.583
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0511 Page 128 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0511 Tank Dia 13000 mm MDMT
PRODUCT MIX XYLENE Tank Ht 22000 mm Des. Tem.
Type: IFR with Alum. dome Specific gravity 0.837 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (50 x 50 x 5) A 36 40841 1 5.00 0.204 2 Stairways and platform A 36 6.61 1 6.610 3 Top wind girder / walkway A 36 7.70 1 7.700 4 Roof structure - 0.000 5 Miscellaneous support 2.000
C Pipe1 2" Pipe SA106 GR B 76000 - - 1.00 1 7.47 0.568 2 3" Pipe SA106 GR B 525 - - 1.00 1 15.26 0.008 3 4" Pipe SA106 GR B 175 - - 1.00 1 22.30 0.004 4 6" Pipe SA106 GR B 600 - - 1.00 1 42.50 0.026 5 8" Pipe SA106 GR B 27000 - - 1.00 1 64.57 1.743
D Flange1 2" Nozzle - 150 # A 105 8 1 2.30 0.018 2 3" Nozzle - 150 # A 105 2 1 3.70 0.007 3 4" Nozzle - 150 # A 105 1 1 5.90 0.006 4 6" Nozzle - 150 # A 105 5 1 8.60 0.043 5 8" Nozzle - 150 # A 105 2 1 13.70 0.027 6 12" Nozzle - 150 # A 105 2 1 75.00 0.150 7 Fittings, Bolts & Nuts A 105 2 1 2.000
Total w.t (B+C+D) for 1 Tank 21.115 Mt
Grand total (A+B+C+D) 1 Tank 95.698 Mt
With 10% margin 1 Tank 105.267 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0511 Page 129 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
89 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0511 Page 130 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
89 Deg. C
3 kPa
NA
J60-D-0513 Page 131 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0513 Tank Dia 13000 mm MDMT
PRODUCT Para Diethyl benzene Tank Ht 22000 mm Des. Tem.
Type: Cone roof tank Specific gravity 0.866 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 10.00 4.00 1 4.00 9.420 2 Tank shell 2nd course A36 12000 2500 8.00 4.00 1 4.00 7.536 3 Tank shell 3rd course A 36 12000 2500 8.00 4.00 1 4.00 7.536 4 Tank shell 4th course A 36 12000 2500 8.00 4.00 1 4.00 7.536 5 Tank shell 5th course A 36 12000 2500 6.00 4.00 1 4.00 5.652 6 Tank shell 6th course A 36 12000 2500 5.00 4.00 1 4.00 4.710 7 Tank shell 7th course A 36 12000 2500 5.00 4.00 1 4.00 4.710 8 Tank shell 8th course A 36 12000 2500 5.00 4.00 1 4.00 4.710 9 Tank shell 9th course (Top) A 36 12000 2000 5.00 4.00 1 4.00 3.768
10 Tank Bottom Plate A 36 12000 2500 8.00 4.00 1 4.00 7.536 11 Annular plates A 36 12000 2500 8.00 4.00 1 4.00 7.536 12 Roof plate A 36 12000 2500 8.00 5.00 1 5.00 9.420
13 Plate for RF pad of Nozzles & Manways A36 12000 2500 14.00 1.00 1 1.00 3.297 14 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1.00 1 1.00 1.413 15 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 1 0.50 1.649 16 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 1 0.10 0.518 17 Plate for wind girder A 36 12000 2500 6.00 1.00 1 1.00 1.413 18 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 1 1.00 1.178
Floating roof - Double Deck19 Plate for Deck20 Plate for Rim outside21 Plate for Rim inside22 Compartment plate23 Pontoon cover plate24 Plate for Deck structural25 Plate for foam dam rim26 Plate for foam dam chamber27 Leg wear plate28 Deck manhole29 Compartment manhole
Total w.t (A) for 1 Tank 89.537
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0513 Page 132 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0513 Tank Dia 13000 mm MDMT
PRODUCT Para Diethyl benzene Tank Ht 22000 mm Des. Tem.
Type: Cone roof tank Specific gravity 0.866 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 50 x 50 x 6) A 36 40841 1 5.00 0.204 2 Stairways and platform A 36 2.00 1 2.000 3 Roof structure A 36 6.00 1 6.000 4 Miscellaneous support 2.000
C Pipe1 2" Pipe SA106 Gr.B 73000 - - 1.00 1 7.47 0.545 2 3" Pipe SA106 Gr.B 500 - - 1.00 1 15.26 0.008 3 4" Pipe SA106 Gr.B 10500 - - 1.00 1 22.30 0.234 4 6" Pipe SA106 Gr.B 3000 - - 1.00 1 42.50 0.128 5 8" Pipe SA106 Gr.B 24000 - - 1.00 1 64.57 1.550 6 10" Pipe SA106 Gr.B 500 - - 1.00 1 95.85 0.048
D Flange1 2" Nozzle - 150 # A 105 5 1 2.30 0.012 2 3" Nozzle - 150 # A 105 2 1 3.70 0.007 3 4" Nozzle - 150 # A 105 3 1 5.90 0.018 4 6" Nozzle - 150 # A 105 7 1 8.60 0.060 5 8" Nozzle - 150 # A 105 5 1 19.50 0.098 6 10" Nozzle - 150 # A 105 2 1 29.90 0.060 7 Fittings, Bolts & Nuts A 105 1 1.000
Total w.t (B+C+D) for 1 Tank 13.970 Mt
Grand total (A+B+C+D) 1 Tank 103.508 Mt
With 10% margin 1 Tank 113.858 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0513 Page 133 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0513 Page 134 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
J60-D-0514 Page 135 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0514 Tank Dia 14000 mm MDMT
PRODUCT Solvent / off - paraxylene Tank Ht 22000 mm Des. Tem.
Type: IFR with Cone roof Specific gravity 0.865 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 10.00 4.00 1 4.00 9.420 2 Tank shell 2nd course A36 12000 2500 10.00 4.00 1 4.00 9.420 3 Tank shell 3rd course A 36 12000 2500 8.00 4.00 1 4.00 7.536 4 Tank shell 4th course A 36 12000 2500 8.00 4.00 1 4.00 7.536 5 Tank shell 5th course A 36 12000 2500 6.00 4.00 1 4.00 5.652 6 Tank shell 6th course A 36 12000 2500 5.00 4.00 1 4.00 4.710 7 Tank shell 7th course A 36 12000 2500 5.00 4.00 1 4.00 4.710 8 Tank shell 8th course A 36 12000 2500 5.00 4.00 1 4.00 4.710 9 Tank shell 9th course (Top) A 36 12000 2000 5.00 4.00 1 4.00 3.768
10 Tank Bottom Plate A 36 12000 2500 8.00 5.00 1 5.00 9.420 11 Annular plates A 36 12000 2500 8.00 5.00 1 5.00 9.420 12 Roof plate A 36 12000 2500 8.00 6.00 1 6.00 11.304
12 Plate for RF pad of Nozzles & Manways A 36 12000 2500 10.00 1.00 1 1.00 2.355 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 1 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 1 0.50 1.649 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 1 0.10 0.518 16 Plate for wind girder A 36 12000 2500 6.00 1.00 1 1.00 1.413 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 1 1.00 1.178
Floating roof - Double Deck18 Plate for Deck19 Plate for Rim outside20 Plate for Rim inside21 Compartment plate22 Pontoon cover plate23 Plate for Deck structural24 Plate for foam dam rim25 Plate for foam dam chamber26 Leg wear plate27 Deck manhole28 Compartment manhole
Total w.t (A) for 1 Tanks 95.896
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0514 Page 136 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0514 Tank Dia 14000 mm MDMT
PRODUCT Solvent / off - paraxylene Tank Ht 22000 mm Des. Tem.
Type: IFR with Cone roof Specific gravity 0.865 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (50x 50 x 6) A 36 43982 1 5.00 0.220 2 Stairways and platform A 36 2.50 1 2.500 3 Roof structure A 36 6.00 1 6.000 4 Miscellaneous support 2.000
C Pipe1 2" Pipe SA106 GR B 67000 - - 1.00 1 7.47 0.500 2 3" Pipe SA106 GR B 500 - - 1.00 1 15.26 0.008 3 4" Pipe SA106 GR B 8000 - - 1.00 1 22.30 0.178 4 6" Pipe SA106 GR B 500 - - 1.00 1 42.50 0.021 5 8" Pipe SA106 GR B 23000 - - 1.00 1 64.57 1.485
D Flange1 2" Nozzle - 150 # A 105 8 1 2.30 0.018 2 3" Nozzle - 150 # A 105 2 1 3.70 0.007 3 4" Nozzle - 150 # A 105 6 1 5.90 0.035 4 6" Nozzle - 150 # A 105 2 1 8.60 0.017 5 8" Nozzle - 150 # A 105 2 1 19.50 0.039 6 12" Nozzle - 150 # A 105 3 1 29.90 0.090 7 Fittings, Bolts & Nuts A 105 1.000
Total w.t (B+C+D) for 1 Tank 14.120 Mt
Grand total (A+B+C+D) 1 Tank 110.015 Mt
With 10% margin 1 Tank 121.017 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0514 Page 137 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
93 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
Considering Aluminium Floating
roof
J60-D-0514 Page 138 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
93 Deg. C
1 kPa
J60-D-0601 to 607 Page 139 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0601 TO 0607 Tank Dia 75000 mm MDMT
PRODUCT ULTRA SULFUR DIESEL Tank Ht 22000 mm Des. Tem.
Type: Aluminium dome Specific gravity 0.805 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A 537 Cl 1 12000 2500 38.00 20.00 7 140.00 1252.8602 Tank shell 2nd course A 537 Cl 1 12000 2500 36.00 20.00 7 140.00 1186.9203 Tank shell 3rd course SA 516 Gr. 70 12000 2500 30.00 20.00 7 140.00 989.1004 Tank shell 4th course SA 516 Gr. 70 12000 2500 25.00 20.00 7 140.00 824.2505 Tank shell 5th course SA 516 Gr. 70 12000 2500 20.00 20.00 7 140.00 659.4006 Tank shell 6th course A 36 12000 2500 20.00 20.00 7 140.00 659.4007 Tank shell 7th course A 36 12000 2500 12.00 20.00 7 140.00 395.6408 Tank shell 8th course A 36 12000 2500 10.00 20.00 7 140.00 329.7009 Tank shell 9th course (Top) A 36 12000 2000 10.00 20.00 7 140.00 263.760
10 Tank Bottom Plate A 36 12000 2500 8.00 145.00 7 1,015.00 1912.26011 Annular plates A 36 12000 2500 15.00 12.00 7 84.00 296.730
12 Plate for RF pad of Nozzles & Manways A 537 Cl 1 12000 2500 38.00 1.00 7 7.00 62.64313 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 7 1.00 1.17814 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 7 7.00 23.07915 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 7 0.70 3.62716 Plate for wind girder A 36 12000 2500 6.00 8.00 7 56.00 79.12817 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 7 7.00 8.243
Total w.t for 7 Tanks 8947.917
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0601 to 607 Page 140 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0601 TO 0607 Tank Dia 75000 mm MDMT
PRODUCT ULTRA SULFUR DIESEL Tank Ht 22000 mm Des. Tem.
Type: Aluminium dome Specific gravity 0.805 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 235619 7 17.70 29.1932 Stairways and platform A 36 6.61 7 46.2703 Top wind girder / walkway A 36 41.23 7 288.6104 Roof structure - 0.0005 Miscellaneous support 10.000
C Pipe1 2" Pipe SA106 Gr.B 124000 - - 1.00 7 7.47 6.4842 3" Pipe SA106 Gr.B 600 - - 1.00 7 15.26 0.0643 4" Pipe SA106 Gr.B 500 - - 1.00 7 22.30 0.0784 6" Pipe SA106 Gr.B 200 - - 1.00 7 42.50 0.0605 8" Pipe SA106 Gr.B 41000 - - 1.00 7 64.57 18.5326 10" Pipe SA106 Gr.B 700 - - 1.00 7 81.46 0.399
D Flange1 2" Nozzle - 150 # A 105 6 7 2.30 0.0972 3" Nozzle - 150 # A 105 3 7 3.70 0.0783 6" Nozzle - 150 # A 105 1 7 8.60 0.0604 8" Nozzle - 150 # A 105 1 7 13.70 0.0965 10" Nozzle - 150 # A 105 3 7 19.50 0.4106 12" Nozzle - 150 # A 105 3 7 29.00 0.6097 14" Nozzle - 150 # A 105 1 7 41.00 0.2878 24" Nozzle - 150 # A 105 1 7 75.00 0.5259 34" Nozzle - 150 # A 105 1 7 205.00 1.435
10 48" Nozzle - 150 # A 105 1 7 426.00 2.98211 Fittings, Bolts & Nuts A 105 2 7 7.000
Total w.t (B+C+D) for 7 Tanks 413.267 Mt
Grand total (A+B+C+D) 7 Tanks 9361.184 Mt
With 5% margin 7 Tanks 9829.243 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0601 to 607 Page 141 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
80 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
J60-D-0601 to 607 Page 142 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
80 Deg. C
1 kPa
NA
J60-D-0611 to 0613 Page 143 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0611 TO 0613 Tank Dia 70000 mm MDMT
PRODUCT HIGH SULFUR DIESEL Tank Ht 22000 mm Des. Tem.
Type: Aluminium dome Specific gravity 0.821 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.70 12000 2500 40.00 18.32 3 55.0 517.723 2 Tank shell 2nd course SA 516 Gr.70 12000 2500 36.00 18.32 3 55.0 465.951 3 Tank shell 3rd course SA 516 Gr.70 12000 2500 28.00 18.32 3 55.0 362.406 4 Tank shell 4th course SA 516 Gr.70 12000 2500 25.00 18.32 3 55.0 323.577 5 Tank shell 5th course SA 516 Gr.70 12000 2500 20.00 18.32 3 55.0 258.862 6 Tank shell 6th course A 36 12000 2500 18.00 18.32 3 55.0 232.975 7 Tank shell 7th course A 36 12000 2500 12.00 18.32 3 55.0 155.317 8 Tank shell 8th course A 36 12000 2500 10.00 18.32 3 55.0 129.431 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 18.32 3 55.0 103.545
10 Tank Bottom Plate A 36 12000 2500 8.00 129.00 3 387.00 729.108 11 Annular plates A 36 12000 2500 14.00 12.00 3 36.00 118.692
12 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 40.00 1.00 3 3.00 28.260 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 3 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 3 3.00 9.891 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 3 0.30 1.554 16 Plate for wind girder A 36 12000 2500 6.00 7.00 3 21.00 29.673 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 3 3.00 3.533
Total w.t for 3 Tanks 3471.675
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0611 to 0613 Page 144 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0611 TO 0613 Tank Dia 70000 mm MDMT
PRODUCT HIGH SULFUR DIESEL Tank Ht 22000 mm Des. Tem.
Type: Aluminium dome Specific gravity 0.821 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 219911 3 17.70 11.677 2 Stairways and platform A 36 6.61 3 19.830 3 Top wind girder / walkway A 36 41.23 3 123.690 4 Roof structure - 0.000 5 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 Gr.B 121000 - - 1.00 3 7.47 2.712 2 3" Pipe SA106 Gr.B 600 - - 1.00 3 15.26 0.027 3 6" Pipe SA106 Gr.B 400 - - 1.00 3 42.50 0.051 4 8" Pipe SA106 Gr.B 40000 - - 1.00 3 64.57 7.748 5 10" Pipe SA106 Gr.B 225 - - 1.00 3 81.46 0.055
D Flange1 2" Nozzle - 150 # A 105 7 3 2.30 0.048 2 3" Nozzle - 150 # A 105 2 3 3.70 0.022 3 6" Nozzle - 150 # A 105 2 3 8.60 0.052 4 8" Nozzle - 150 # A 105 1 3 13.70 0.041 5 10" Nozzle - 150 # A 105 1 3 19.50 0.059 6 12" Nozzle - 150 # A 105 1 3 29.00 0.087 7 14" Nozzle - 150 # A 105 1 3 41.00 0.123 8 20" Nozzle - 150 # A 105 1 3 75.00 0.225 9 46" Nozzle - 150 # A 105 1 3 375.00 1.125
11 Fittings, Bolts & Nuts A 105 2 3 7.000
Total w.t (B+C+D) for 3 Tank 179.572 Mt
Grand total (A+B+C+D) 3 Tank 179.572 Mt
With 10% margin 3 Tank 197.530 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0611 to 0613 Page 145 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
76 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
J60-D-0611 to 0613 Page 146 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
76 Deg. C
1 kPa
NA
J60-D-0614 Page 147 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0614 Tank Dia 70000 mm MDMT
PRODUCT HIGH SULFUR DIESEL Tank Ht 22000 mm Des. Tem.
Type: Aluminium dome Specific gravity 0.821 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.70 12000 2500 40.00 19.00 1 19.00 178.980 2 Tank shell 2nd course SA 516 Gr.70 12000 2500 36.00 19.00 1 19.00 161.082 3 Tank shell 3rd course SA 516 Gr.70 12000 2500 28.00 19.00 1 19.00 125.286 4 Tank shell 4th course SA 516 Gr.70 12000 2500 25.00 19.00 1 19.00 111.863 5 Tank shell 5th course SA 516 Gr.70 12000 2500 20.00 19.00 1 19.00 89.490 6 Tank shell 6th course A 36 12000 2500 18.00 19.00 1 19.00 80.541 7 Tank shell 7th course A 36 12000 2500 12.00 19.00 1 19.00 53.694 8 Tank shell 8th course A 36 12000 2500 10.00 19.00 1 19.00 44.745 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 19.00 1 19.00 35.796
10 Tank Bottom Plate A 36 12000 2500 8.00 128.40 1 128.40 241.906 11 Annular plates A 36 12000 2500 14.00 12.00 1 12.00 39.564
12 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 40.00 1.00 1 1.00 9.420 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 1 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 1 1.00 3.297 15 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 1 0.10 0.518 16 Plate for wind girder A 36 12000 2500 6.00 7.00 1 7.00 9.891 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 1 1.00 1.178
Total w.t for 1 Tanks 1188.427
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0614 Page 148 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0614 Tank Dia 70000 mm MDMT
PRODUCT HIGH SULFUR DIESEL Tank Ht 22000 mm Des. Tem.
Type: Aluminium dome Specific gravity 0.821 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 219911 1 17.70 3.892 2 Stairways and platform A 36 6.61 1 6.610 3 Top wind girder / walkway A 36 38.48 1 38.480 4 Roof structure - 0.000 5 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 Gr.B 121000 - - 1.00 1 7.47 0.904 2 3" Pipe SA106 Gr.B 600 - - 1.00 1 15.26 0.009 3 6" Pipe SA106 Gr.B 400 - - 1.00 1 42.50 0.017 4 8" Pipe SA106 Gr.B 40000 - - 1.00 1 64.57 2.583 5 10" Pipe SA106 Gr.B 225 - - 1.00 1 81.46 0.018
D Flange1 2" Nozzle - 150 # A 105 7 1 2.30 0.016 2 3" Nozzle - 150 # A 105 2 1 3.70 0.007 3 6" Nozzle - 150 # A 105 2 1 8.60 0.017 4 8" Nozzle - 150 # A 105 1 1 13.70 0.014 5 10" Nozzle - 150 # A 105 1 1 19.50 0.020 6 12" Nozzle - 150 # A 105 1 1 29.00 0.029 7 14" Nozzle - 150 # A 105 1 1 41.00 0.041 8 20" Nozzle - 150 # A 105 1 1 75.00 0.075 9 46" Nozzle - 150 # A 105 1 1 375.00 0.375
11 Fittings, Bolts & Nuts A 105 2 1 2.000
Total w.t (B+C+D) for 1 Tank 60.107 Mt
Grand total (A+B+C+D) 1 Tank 1248.535 Mt
With 5% margin 1 Tank 1310.961 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0614 Page 149 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
76 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
J60-D-0614 Page 150 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
76 Deg. C
1 kPa
J60-D-0701 to 704 Page 151 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0701 to 704 Tank Dia 82000 mm MDMT
PRODUCT Fuel oil storage Tank Ht 22000 mm Des. Tem.
Type: Aluminium dome roof tank Specific gravity 0.917 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A537 Cl.1 12000 2500 42.00 21.50 4 86.00 850.626 2 Tank shell 2nd course A537 Cl.1 12000 2500 38.00 21.50 4 86.00 769.614 3 Tank shell 3rd course A537 Cl.1 12000 2500 32.00 21.50 4 86.00 648.096 4 Tank shell 4th course A537 Cl.1 12000 2500 32.00 21.50 4 86.00 648.096 5 Tank shell 5th course A516Gr.70 12000 2500 32.00 21.50 4 86.00 648.096 6 Tank shell 6th course A516Gr.70 12000 2500 20.00 21.50 4 86.00 405.060 7 Tank shell 7th course A516Gr.70 12000 2500 15.00 21.50 4 86.00 303.795 8 Tank shell 8th course A 36 12000 2500 10.00 21.50 4 86.00 202.530 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 21.50 4 86.00 162.024
10 Tank Bottom Plate A 36 12000 2500 8.00 177.00 4 708.00 1333.872 11 Annular plates A 36 12000 2500 14.00 12.00 4 48.00 158.256
12 Plate for RF pad of Nozzles & Manways A537 Cl.1 12000 2500 42.00 1.00 4 4.00 39.564 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 4 1.00 1.178 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 4 4.00 13.188 15 Plate for manway cover / bolting flange A537 Cl.1 12000 2500 22.00 0.10 4 0.40 2.072 16 Plate for wind girder A 36 12000 2500 6.00 7.00 4 28.00 39.564 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 4 12.00 14.130
Total w.t for 4 Tanks 6239.761
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos plates)
Wt. (MT)Length
(mm)
J60-D-0701 to 704 Page 152 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0701 to 704 Tank Dia 82000 mm MDMT
PRODUCT Fuel oil storage Tank Ht 22000 mm Des. Tem.
Type: Aluminium dome roof tank Specific gravity 0.917 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 257611 4 17.70 18.2392 Stairways and platform A 36 6.61 4 26.4403 Top wind girder / walkway A 36 45.08 4 180.3204 Steel Roof structure - 0.0005 Miscellaneous support 10.000
C Pipe1 2" Pipe SA106 GR B 4730000 - - 1.00 4 7.47 141.3322 3" Pipe SA106 GR B 51000 - - 1.00 4 15.26 3.1133 4" Pipe SA106 GR B 4500 1.00 4 22.30 4 6" Pipe SA106 GR B 1000 - - 1.00 4 42.50 0.1705 8" Pipe SA106 GR B 25000 - - 1.00 4 64.57 6.4576 10" Pipe SA106 GR B 500 - - 1.00 4 81.46 0.163
D Flange1 2" Nozzle - 150 # A 105 6 4 2.30 0.0552 3" Nozzle - 150 # A 105 7 4 3.70 0.1043 6" Nozzle - 150 # A 105 3 4 8.60 0.1034 8" Nozzle - 150 # A 105 2 4 13.70 0.1105 10" Nozzle - 150 # A 105 1 4 19.50 0.0786 18" Nozzle - 150 # A 105 2 4 59.00 0.4727 42" Nozzle - 150 # A 105 1 4 375.00 1.5008 Fittings, Bolts & Nuts A 105 1 4 8.000
Total w.t (B+C+D) for 4 Tank 396.656 Mt
Grand total (A+B+C+D) 4 Tank 6636.417 Mt
With 5% margin 4 Tank 6968.238 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0701 to 704 Page 153 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
120 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
J60-D-0701 to 704 Page 154 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
120 Deg. C
1 kPa
NA
J60-D-0711 Page 155 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0711 Tank Dia 23000 mm MDMT
PRODUCT Black oil Tank Ht 22000 mm Des. Tem.
Type: Dome roof Specific gravity 1.031 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 20.00 6.50 1 6.50 30.615 2 Tank shell 2nd course A36 12000 2500 18.00 6.50 1 6.50 27.554 3 Tank shell 3rd course A 36 12000 2500 16.00 6.50 1 6.50 24.492 4 Tank shell 4th course A 36 12000 2500 14.00 6.50 1 6.50 21.431 5 Tank shell 5th course A 36 12000 2500 12.00 6.50 1 6.50 18.369 6 Tank shell 6th course A 36 12000 2500 10.00 6.50 1 6.50 15.308 7 Tank shell 7th course A 36 12000 2500 8.00 6.50 1 6.50 12.246 8 Tank shell 8th course A 36 12000 2500 6.00 6.50 1 6.50 9.185 9 Tank shell 9th course (Top) A 36 12000 2000 6.00 6.50 1 6.50 7.348
10 Tank Bottom Plate A 36 12000 2500 8.00 14 1 14.00 26.376 11 Annular plates A 36 12000 2500 8.00 4 1 4.00 7.536
12 Plate for RF pad of Nozzles & Manways A 36 12000 2500 20.00 1 1 1.00 4.710 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1 1 1.00 1.413 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 1 1.00 3.297 15 Plate for manway cover / bolting flange A 36 12000 2500 26.00 0.20 1 0.20 1.225 16 Plate for wind girder A 36 12000 2500 8.00 1.00 1 1.00 1.884 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 1 3.00 3.533
18 Plate for clean out door A36 12000 2500 36.00 0.20 1 0.20 1.696 19 Roof plate A36 12000 2500 8.00 29.00 1 29.00 54.636
Total w.t (A) for 1 Tank 272.850
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0711 Page 156 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0711 Tank Dia 23000 mm MDMT
PRODUCT Black oil Tank Ht 22000 mm Des. Tem.
Type: Dome roof Specific gravity 1.031 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 72257 1 17.70 1.279 2 Stairways and platform A 36 9.11 1 9.110 3 Top wind girder / walkway A 36 12.64 1 12.640 4 steel Roof structure - 0 0.000 5 Miscellaneous support 3.000 6 Insulation cleats A 36 1 1 1.000
C Pipe1 2" Pipe SA106 GR B 1331000 - - 1.00 1 7.47 9.943 3 4" Pipe SA106 GR B 700 - - 1.00 1 22.30 0.016 4 6" Pipe SA106 GR B 2000 - - 1.00 1 42.50 0.085 5 8" Pipe SA106 GR B 23500 - - 1.00 1 64.57 1.517 5 10" Pipe SA106 GR B 700 - - 1.00 1 95.85 0.067
D Flange1 2" Nozzle - 150 # A 105 12 1 2.30 0.028 2 4" Nozzle - 150 # A 105 1 1 5.90 0.006 3 6" Nozzle - 150 # A 105 5 1 8.60 0.043 4 8" Nozzle - 150 # A 105 1 1 13.70 0.014 5 10" Nozzle - 150 # A 105 1 1 19.50 0.020 6 18" Nozzle - 150 # A 105 1 1 59.00 0.059 7 24" Nozzle - 150 # A 105 1 1 100.00 0.100 8 Fittings, Bolts & Nuts A 105 1 1.000
Total w.t (B+C+D) for 1 Tank 39.925 Mt
Grand total (A+B+C+D) 1 Tank 312.776 Mt
With 10% margin 1 Tank 344.053 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0711 Page 157 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
250 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
J60-D-0711 Page 158 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
250 Deg. C
1 kPa
NA
Heating coil
J60-D-0721 to 723 Page 159 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0721 to 723 Tank Dia 63000 mm MDMT
PRODUCT VGO Storage Tank Ht 22000 mm Des. Tem.
Type: Alumin. dome roof tank Specific gravity 0.895 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.70 12000 2500 40.00 16.65 3 49.9 470.5 2 Tank shell 2nd course SA 516 Gr.70 12000 2500 36.00 16.65 3 49.9 423.5 3 Tank shell 3rd course SA 516 Gr.70 12000 2500 32.00 16.65 3 49.9 376.4 4 Tank shell 4th course SA 516 Gr.70 12000 2500 25.00 16.65 3 49.9 294.1 5 Tank shell 5th course SA 516 Gr.70 12000 2500 20.00 16.65 3 49.9 235.3 6 Tank shell 6th course A 36 12000 2500 18.00 16.65 3 49.9 211.7 7 Tank shell 7th course A 36 12000 2500 12.00 16.65 3 49.9 141.2 8 Tank shell 8th course A 36 12000 2500 10.00 16.65 3 49.9 117.6 9 Tank shell 9th course (Top) A 36 12000 2000 10.00 16.65 3 49.9 94.1
10 Tank Bottom Plate A 36 12000 2500 8.00 104.00 3 312.00 587.8 11 Annular plates A 36 12000 2500 10.00 9.00 3 27.00 63.6
12 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 10.00 1.00 3 3.00 7.1 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 3 1.00 1.2 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 3 3.00 9.89 15 Plate for manway cover / bolting flange SA 516 Gr.70 12000 2500 22.00 0.10 3 0.30 1.55 16 Plate for wind girder A 36 12000 2500 6.00 7.00 3 21.00 29.67 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 3 3.00 3.53
Total w.t for 3 Tanks 3,068.7
Note : The above indicated thicknesses are calculated as per Design Code API 650 11th Edition Add 3.
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0721 to 723 Page 160 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0721 to 723 Tank Dia 63000 mm MDMT
PRODUCT VGO Storage Tank Ht 22000 mm Des. Tem.
Type: Alumin. dome roof tank Specific gravity 0.895 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 197920 3 17.70 10.51 2 Stairways and platform A 36 6.61 3 19.83 3 Top wind girder / walkway A 36 34.64 3 103.92 4 Roof structure A 36 0.00 5 Miscellaneous support 5.000
C Pipe1 2" Pipe SA106 GR B 3590000 - - 1.00 3 7.47 80.45 2 3" Pipe SA106 GR B 52000 - - 1.00 3 15.26 2.38 3 4" Pipe SA106 GR B 5000 1.00 3 22.30 0.33 4 6" Pipe SA106 GR B 1500 - - 1.00 3 42.50 0.19 5 8" Pipe SA106 GR B 26000 - - 1.00 3 64.57 5.04 6 10" Pipe SA106 GR B 25000 - - 1.00 3 81.46 6.11
D Flange1 2" Nozzle - 150 # A 105 6 3 2.30 0.04 2 3" Nozzle - 150 # A 105 7 3 3.70 0.08 3 4" Nozzle - 150 # A 105 1 3 5.90 0.02 4 6" Nozzle - 150 # A 105 4 3 8.60 0.10 5 8" Nozzle - 150 # A 105 2 3 13.70 0.08 6 10" Nozzle - 150 # A 105 2 3 19.50 0.12 7 30" Nozzle - 150 # A 105 1 3 59.00 0.18 8 42" Nozzle - 150 # A 105 1 3 375.00 1.13 9 Fittings, Bolts & Nuts A 105 1 3 6.00
Total w.t (B+C+D) for 3 Tank 241.50 Mt
Grand total (A+B+C+D) 3 Tank 3310.20 Mt
With 5% margin 3 Tank 3475.71 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0721 to 723 Page 161 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
120 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
J60-D-0721 to 723 Page 162 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
120 Deg. C
1 kPa
J60-D-0801 & 802 & 0803 Page 163 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0801 & 802 & 803 Tank Dia 18000 mm MDMT
PRODUCT Asphalt Tank Ht 22000 mm Des. Tem.
Type: Cone roof tank Specific gravity 1.027 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 16.00 5.00 3 15.00 56.520 2 Tank shell 2nd course A36 12000 2500 14.00 5.00 3 15.00 49.455 3 Tank shell 3rd course A 36 12000 2500 14.00 5.00 3 15.00 49.455 4 Tank shell 4th course A 36 12000 2500 12.00 5.00 3 15.00 42.390 5 Tank shell 5th course A 36 12000 2500 10.00 5.00 3 15.00 35.325 6 Tank shell 6th course A 36 12000 2500 8.00 5.00 3 15.00 28.260 7 Tank shell 7th course A 36 12000 2500 6.00 5.00 3 15.00 21.195 8 Tank shell 8th course A 36 12000 2500 6.00 5.00 3 15.00 21.195 9 Tank shell 9th course (Top) A 36 12000 2000 6.00 5.00 3 15.00 16.956
10 Tank Bottom Plate A 36 12000 2500 8.00 8.00 3 24.00 45.216 11 Annular plates A 36 12000 2500 8.00 4.00 3 12.00 22.608 12 Roof plate A 36 12000 2500 8.00 10.00 3 30.00 56.520
13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 14.00 1.00 3 3.00 9.891 14 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1.00 3 1.00 1.413 15 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 3 1.50 4.946 16 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 3 0.30 1.554 17 Plate for wind girder A 36 12000 2500 6.00 1.00 3 3.00 4.239 18 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 3 3.00 3.533 19 Clean out door A 36 12000 2500 36.00 0.20 3 0.60 5.087
Total w.t (A) for 3 Tanks 475.757
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0801 & 802 & 0803 Page 164 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0801 & 802 & 803 Tank Dia 18000 mm MDMT
PRODUCT Asphalt Tank Ht 22000 mm Des. Tem.
Type: Cone roof tank Specific gravity 1.027 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 56549 3 17.70 3.003 2 Stairways and platform A 36 6.50 3 19.500 3 Roof structure A 36 8.00 3 24.000 4 Insulation supports A 36 3.00 3 9.000 5 Miscellaneous support 6.000
C Pipe1 2" Pipe SA106 GR B 1167800 - - 1.00 3 7.47 26.170 2 3" Pipe SA106 GR B 500 - - 1.00 3 15.26 0.023 3 4" Pipe SA106 GR B 3500 - - 1.00 3 22.30 0.234 4 6" Pipe SA106 GR B 13500 - - 1.00 3 42.50 1.721 5 8" Pipe SA106 GR B 1000 - - 1.00 3 64.57 0.194
D Flange1 2" Nozzle - 150 # A 105 12 3 2.30 0.083 2 3" Nozzle - 150 # A 105 4 3 3.70 0.044 3 4" Nozzle - 150 # A 105 6 3 5.90 0.106 4 6" Nozzle - 150 # A 105 2 3 8.60 0.052 5 8" Nozzle - 150 # A 105 5 3 19.50 0.293 6 12" Nozzle - 150 # A 105 2 3 29.00 0.174 7 Fittings, Bolts & Nuts A 105 3 1.000
Total w.t (B+C+D) for 3 Tank 91.597 Mt
Grand total (A+B+C+D) 3 Tank 567.354 Mt
With 10% margin 3 Tank 624.089 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0801 & 802 & 0803 Page 165 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
250 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
J60-D-0801 & 802 & 0803 Page 166 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
250 Deg. C
1 kPa
J60-D-0804 Page 167 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0804 Tank Dia 23000 mm MDMT
PRODUCT Black oil Tank Ht 22000 mm Des. Tem.
Type: Dome roof Specific gravity 0.936 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 18.00 6.50 1 6.50 27.554 2 Tank shell 2nd course A36 12000 2500 16.00 6.50 1 6.50 24.492 3 Tank shell 3rd course A 36 12000 2500 14.00 6.50 1 6.50 21.431 4 Tank shell 4th course A 36 12000 2500 12.00 6.50 1 6.50 18.369 5 Tank shell 5th course A 36 12000 2500 10.00 6.50 1 6.50 15.308 6 Tank shell 6th course A 36 12000 2500 8.00 6.50 1 6.50 12.246 7 Tank shell 7th course A 36 12000 2500 6.00 6.50 1 6.50 9.185 8 Tank shell 8th course A 36 12000 2500 6.00 6.50 1 6.50 9.185 9 Tank shell 9th course (Top) A 36 12000 2000 6.00 6.50 1 6.50 7.348
10 Tank Bottom Plate A 36 12000 2500 8.00 14 1 14.00 26.376 11 Annular plates A 36 12000 2500 8.00 4 1 4.00 7.536
12 Plate for RF pad of Nozzles & Manways A36 12000 2500 18.00 1 1 1.00 4.239 13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1 1 1.00 1.413 14 Plate for Nozzle neck A 36 12000 2500 14.00 1.00 1 1.00 3.297 15 Plate for manway cover / bolting flange A 36 12000 2500 26.00 0.10 1 0.10 0.612 16 Plate for wind girder A 36 12000 2500 8.00 0.00 1 0.00 0.000 17 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 1 3.00 3.533
18 Plate for clean out door A36 12000 2500 36.00 0.20 1 0.20 1.696 19 Roof plate A36 12000 2500 8.00 29.00 1 29.00 54.636
Total w.t (A) for 1 Tanks 248.453
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0804 Page 168 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0804 Tank Dia 23000 mm MDMT
PRODUCT Black oil Tank Ht 22000 mm Des. Tem.
Type: Dome roof Specific gravity 0.936 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 72257 1 17.70 1.279 2 Stairways and platform A 36 9.11 1 9.110 3 Top wind girder / walkway A 36 12.64 1 12.640 4 Steel Roof structure - 0 0.000 5 Insulation cleats A 36 1 1 1.000 6 Miscellaneous support 3.000
C Pipe1 2" Pipe SA106 GR B 1335000 - - 1.00 1 7.47 9.972 3 4" Pipe SA106 GR B 500 - - 1.00 1 22.30 0.011 4 6" Pipe SA106 GR B 12500 - - 1.00 1 42.50 0.531 5 8" Pipe SA106 GR B 25000 - - 1.00 1 64.57 1.614 5 10" Pipe SA106 GR B 500 - - 1.00 1 95.85 0.048
D Flange1 2" Nozzle - 150 # A 105 9 1 2.30 0.021 2 4" Nozzle - 150 # A 105 1 1 5.90 0.006 3 6" Nozzle - 150 # A 105 7 1 8.60 0.060 4 8" Nozzle - 150 # A 105 2 1 13.70 0.027 5 10" Nozzle - 150 # A 105 1 1 19.50 0.020 6 18" Nozzle - 150 # A 105 1 1 59.00 0.059 7 24" Nozzle - 150 # A 105 1 1 100.00 0.100 8 Fittings, Bolts & Nuts A 105 1 1.000
Total w.t (B+C+D) for 1 Tank 40.499 Mt
Grand total (A+B+C+D) 1 Tank 288.951 Mt
With 10% margin 1 Tank 317.846 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0804 Page 169 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
230 Deg. C
1 kPa
MTO
Total PriceRemarks
USD
J60-D-0804 Page 170 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
230 Deg. C
1 kPa
NA
Heating coil
J60-D-0903 & 904 & 0906 Page 171 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0903 & 904 & 906 Tank Dia 18000 mm MDMT
PRODUCT Heavy slops Tank Ht 22000 mm Des. Tem.
Type: Cone roof tank Specific gravity 1.14 Des. Pres.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A36 12000 2500 18.00 5.00 3 15.00 63.585 2 Tank shell 2nd course A36 12000 2500 16.00 5.00 3 15.00 56.520 3 Tank shell 3rd course A 36 12000 2500 14.00 5.00 3 15.00 49.455 4 Tank shell 4th course A 36 12000 2500 12.00 5.00 3 15.00 42.390 5 Tank shell 5th course A 36 12000 2500 10.00 5.00 3 15.00 35.325 6 Tank shell 6th course A 36 12000 2500 8.00 5.00 3 15.00 28.260 7 Tank shell 7th course A 36 12000 2500 6.00 5.00 3 15.00 21.195 8 Tank shell 8th course A 36 12000 2500 6.00 5.00 3 15.00 21.195 9 Tank shell 9th course (Top) A 36 12000 2000 6.00 5.00 3 15.00 16.956
10 Tank Bottom Plate A 36 12000 2500 8.00 8.00 3 24.00 45.216 11 Annular plates A 36 12000 2500 8.00 4.00 3 12.00 22.608 12 Roof plate A 36 12000 2500 8.00 10.00 3 30.00 56.520
13 Plate for RF pad of Nozzles & Manways A 36 12000 2500 14.00 1.00 3 3.00 9.891 14 Plate for RF pad of Nozzles & Manways A 36 12000 2500 6.00 1.00 3 1.00 1.413 15 Plate for Nozzle neck A 36 12000 2500 14.00 0.50 3 1.50 4.946 16 Plate for manway cover / bolting flange A 36 12000 2500 22.00 0.10 3 0.30 1.554 17 Plate for wind girder A 36 12000 2500 6.00 0.00 3 0.00 0.000 18 Miscellaneous - Platform & stair A 36 12000 2500 5.00 1.00 3 3.00 3.533 19 Clean out door A 36 12000 2500 36.00 0.20 3 0.60 5.087
Total w.t (A) for 3 Tanks 485.648
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
J60-D-0903 & 904 & 0906 Page 172 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO J60-D-0903 & 904 & 906 Tank Dia 18000 mm MDMT
PRODUCT Heavy slops Tank Ht 22000 mm Des. Tem.
Type: Cone roof tank Specific gravity 1.14 Des. Pres.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 56549 3 17.70 3.003 2 Stairways and platform A 36 6.50 3 19.500 3 Roof structure A 36 8.00 3 24.000 4 Insulation supports A 36 3.00 3 9.000 6 Miscellaneous support 3.000
C Pipe1 2" Pipe SA106 GR B 1167800 - - 1.00 3 7.47 26.170 2 3" Pipe SA106 GR B 1000 - - 1.00 3 15.26 0.046 3 4" Pipe SA106 GR B 4000 - - 1.00 3 22.30 0.268 4 6" Pipe SA106 GR B 14000 - - 1.00 3 42.50 1.785 5 8" Pipe SA106 GR B 1500 - - 1.00 3 64.57 0.291
D Flange1 2" Nozzle - 150 # A 105 12 3 2.30 0.083 2 3" Nozzle - 150 # A 105 4 3 3.70 0.044 3 4" Nozzle - 150 # A 105 6 3 5.90 0.106 4 6" Nozzle - 150 # A 105 2 3 8.60 0.052 5 8" Nozzle - 150 # A 105 5 3 19.50 0.293 6 12" Nozzle - 150 # A 105 2 3 29.00 0.174 7 Fittings, Bolts & Nuts A 105 3 1.000
Total w.t (B+C+D) for 3 Tank 88.814 Mt
Grand total (A+B+C+D) 3 Tank 574.462 Mt
With 10% margin 3 Tank 631.908 Mt
Pipe Lenth (mm) Qty
No of tanks
J60-D-0903 & 904 & 0906 Page 173 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
250 Deg. C
1 kPa
MTOTotal Price
RemarksUSD
J60-D-0903 & 904 & 0906 Page 174 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
250 Deg. C
1 kPa
API 620 J60-D-0-0114 Page 175 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0114 Tank Dia 66000 mm MDMT
PRODUCT Naptha Tank Ht 22000 mm Des. Tem.
Type: IFR with CS dome Specific gravity 0.704 Des. Pres.
Corrosion allowance 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 537 Cl.2 12000 2500 68.00 18.00 1 18.00 288.252 2 Tank shell 2nd course SA 537 Cl.2 12000 2500 62.00 18.00 1 18.00 262.818 3 Tank shell 3rd course SA 537 Cl.2 12000 2500 56.00 18.00 1 18.00 237.384 4 Tank shell 4th course SA 537 Cl.2 12000 2500 50.00 18.00 1 18.00 211.950 5 Tank shell 5th course SA 537 Cl.2 12000 2500 46.00 18.00 1 18.00 194.994 6 Tank shell 6th course SA 537 Cl.2 12000 2500 40.00 18.00 1 18.00 169.560 7 Tank shell 7th course SA 516 Gr.70 12000 2500 38.00 18.00 1 18.00 161.082 8 Tank shell 8th course SA 516 Gr.70 12000 2500 32.00 18.00 1 18.00 135.648 9 Tank shell 9th course (Top) SA 516 Gr.70 12000 2000 24.00 18.00 1 18.00 81.389
10 Tank Bottom Plate SA 516 Gr.70 12000 2500 10.0 115.00 1 115.00 270.825 11 Annular plates SA 516 Gr.70 12000 2500 14.0 16.00 1 16.00 52.752 12 Dome roof (CS) SA 516 Gr.70 12000 2500 10.0 116.00 1 116.00 273.180 13 Compression plate SA 516 Gr.70 12000 2500 40.0 16.00 1 16.00 150.720 14 Plate for RF pad of Nozzles & Manways SA 537 Cl.2 12000 2500 40.0 1.50 1 1.50 14.130 15 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 8.0 1.00 1 1.00 1.884 16 Plate for Nozzle neck SA 537 Cl.2 12000 2500 16.0 1.00 1 1.00 3.768 17 Plate for manway cover / bolting flange SA 537 Cl.2 12000 2500 20.0 0.15 1 0.15 0.707 18 Plate for wind girder A 36 12000 2500 8.0 2.50 1 2.50 4.710 19 Miscellaneous - Platform & Stair A 36 12000 2500 5.0 3.00 1 3.00 3.533
Total w.t (A) for 1 Tank 2519.285
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
API 620 J60-D-0-0114 Page 176 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0114 Tank Dia 66000 mm MDMT
PRODUCT Naptha Tank Ht 22000 mm Des. Tem.
Type: IFR with CS dome Specific gravity 0.704 Des. Pres.
Corrosion allowance 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 207345 1 17.70 3.670 2 Stairways and platform A 36 11.94 1 11.940 3 Top wind girder / walkway A 36 22.94 1 22.940 4 Roof structure A 36 150.00 1 150.000 5 Miscellaneous w.t A 36 5.00 1 5.000
C Pipe1 2" Pipe SA106 Gr B 90000 - - 1.00 1 7.47 0.672 2 3" Pipe SA106 Gr B - - 1.00 1 15.26 0.000 3 4" Pipe SA106 Gr B 10000 - - 1.00 1 22.30 0.223 4 6" Pipe SA106 Gr B 2000 - - 1.00 1 42.50 0.085 5 8" Pipe SA106 Gr B 24000 - - 1.00 1 64.57 1.550
D Flange1 2" Nozzle - 150 # A 105 9 1 2.30 0.021 2 4" Nozzle - 150 # A 105 1 1 5.90 0.006 3 6" Nozzle - 150 # A 105 4 1 8.60 0.034 4 8" Nozzle - 150 # A 105 1 1 13.70 0.014 5 18" Nozzle - 150 # A 105 1 1 29.00 0.029 6 38" Nozzle - 150 # A 105 1 1 250.00 0.250 7 42" Nozzle - 150 # A 105 1 1 400.00 0.400
Total w.t (B+C+D) for 1 Tank 196.834 Mt
Grand total (A+B+C+D) 1 Tank 2716.118 Mt
With 5% margin 1 Tank 2851.924 Mt
Pipe Lenth (mm) Qty
No of tanks
API 620 J60-D-0-0114 Page 177 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
50 kPa
Total PriceRemarks
USD
API 620 J60-D-0-0114 Page 178 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
50 kPa
API 620 J60-D-0121 Page 179 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0121 Tank Dia 35000 mm MDMT
PRODUCT Light naptha Tank Ht 22000 mm Des. Tem.
Type: IFR with dome Specific gravity 0.615 Des. Pres.
Corrosion allowance 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 537 Cl.2 12000 2500 40.00 10.00 1 10.00 94.200 2 Tank shell 2nd course SA 516 Gr.70 12000 2500 38.00 10.00 1 10.00 89.490 3 Tank shell 3rd course SA 516 Gr.70 12000 2500 36.00 10.00 1 10.00 84.780 4 Tank shell 4th course SA 516 Gr.70 12000 2500 32.00 10.00 1 10.00 75.360 5 Tank shell 5th course SA 516 Gr.70 12000 2500 28.00 10.00 1 10.00 65.940 6 Tank shell 6th course SA 516 Gr.70 12000 2500 25.00 10.00 1 10.00 58.875 7 Tank shell 7th course SA 516 Gr.70 12000 2500 22.00 10.00 1 10.00 51.810 8 Tank shell 8th course SA 516 Gr.70 12000 2500 18.00 10.00 1 10.00 42.390 9 Tank shell 9th course (Top) SA 516 Gr.70 12000 2000 14.00 10.00 1 10.00 26.376
10 Tank Bottom Plate SA 516 Gr.70 12000 2500 8.00 31.00 1 31.00 58.404 11 Annular plates SA 516 Gr.70 12000 2500 14.00 6.00 1 6.00 19.782 12 Dome roof SA 516 Gr.70 12000 2500 8.00 30.00 1 30.00 56.520 13 Compression plate SA 516 Gr.70 12000 2500 22.00 6.00 1 6.00 31.086 14 Plate for RF pad of Nozzles & Manways SA 537 Cl.2 12000 2500 40.00 1.50 1 1.50 14.130 15 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 8.00 1.00 1 1.00 1.884 16 Plate for Nozzle neck SA 537 Cl.2 12000 2500 16.00 1.00 1 1.00 3.768 17 Plate for manway cover / bolting flange SA 537 Cl.2 12000 2500 20.00 0.15 1 0.15 0.707 18 Plate for wind girder A 36 12000 2500 8.00 2.00 1 2.00 3.768 19 Miscellaneous - Platform & Stair A 36 12000 2500 5.00 3.00 1 3.00 3.533
Total w.t (A) for 1 Tanks 782.802
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
API 620 J60-D-0121 Page 180 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0121 Tank Dia 35000 mm MDMT
PRODUCT Light naptha Tank Ht 22000 mm Des. Tem.
Type: IFR with dome Specific gravity 0.615 Des. Pres.
Corrosion allowance 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 109956 1 17.70 1.946 2 Stairways and platform A 36 23.00 1 23.000 3 Top wind girder / walkway A 36 19.24 1 19.240 4 Roof structure A 36 49.00 1 49.000 5 Miscellaneous w.t A 36 5.00 1 5.000
C Pipe1 2" Pipe SA106 Gr B 70000 - - 1.00 1 7.47 0.523 2 4" Pipe SA106 Gr B 10000 - - 1.00 1 22.30 0.223 3 6" Pipe SA106 Gr B 1000 - - 1.00 1 42.50 0.043 4 8" Pipe SA106 Gr B 23500 - - 1.00 1 64.57 1.517
D Flange1 2" Nozzle - 150 # A 105 6 1 2.30 0.014 2 4" Nozzle - 150 # A 105 1 1 5.90 0.006 3 6" Nozzle - 150 # A 105 5 1 8.60 0.043 4 8" Nozzle - 150 # A 105 1 1 13.70 0.014 5 10" Nozzle - 150 # A 105 1 1 19.50 0.020 6 12" Nozzle - 150 # A 105 6 1 29.00 0.174
Total w.t (B+C+D) for 1 Tank 100.762 Mt
Grand total (A+B+C+D) 1 Tank 883.564 Mt
With 5% margin 1 Tank 927.742 Mt
Pipe Lenth (mm) Qty
No of tanks
API 620 J60-D-0121 Page 181 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0121 Tank Dia 35000 mm MDMT
PRODUCT Light naptha Tank Ht 22000 mm Des. Tem.
Type: IFR with dome Specific gravity 0.615 Des. Pres.
Corrosion allowance 1.6 mm
API 620 J60-D-0121 Page 182 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
50 kPa
Total PriceRemarks
USD
API 620 J60-D-0121 Page 183 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
50 kPa
API 620 J60-D-0121 Page 184 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
50 kPa
API620 J60-D-0241 242 Page 185 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0241 & 0242 Tank Dia 29000 mm MDMT
PRODUCT Isomerate Tank Ht 22000 mm Des. Tem.
Type: IFR with dome Specific gravity 0.618 Des. Pres.
Corrosion allowance 3.2 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.70 12000 2500 36.00 8.00 2 16.00 135.648 2 Tank shell 2nd course SA 516 Gr.70 12000 2500 34.00 8.00 2 16.00 128.112 3 Tank shell 3rd course SA 516 Gr.70 12000 2500 32.00 8.00 2 16.00 120.576 4 Tank shell 4th course SA 516 Gr.70 12000 2500 28.00 8.00 2 16.00 105.504 5 Tank shell 5th course SA 516 Gr.70 12000 2500 25.00 8.00 2 16.00 94.200 6 Tank shell 6th course SA 516 Gr.70 12000 2500 22.00 8.00 2 16.00 82.896 7 Tank shell 7th course SA 516 Gr.70 12000 2500 20.00 8.00 2 16.00 75.360 8 Tank shell 8th course SA 516 Gr.70 12000 2500 16.00 8.00 2 16.00 60.288 9 Tank shell 9th course (Top) SA 516 Gr.70 12000 2000 14.00 8.00 2 16.00 42.202
10 Tank Bottom Plate SA 516 Gr.70 12000 2500 10.0 21.00 2 42.00 98.910 11 Annular plates SA 516 Gr.70 12000 2500 14.0 6.00 2 12.00 39.564 12 Dome roof SA 516 Gr.70 12000 2500 10.0 21.00 2 42.00 98.910 13 compression plate SA 516 Gr.70 12000 2500 22.0 6.00 2 12.00 62.172 14 Plate for RF pad of Nozzles & Manways SA 537 Cl.2 12000 2500 40.0 1.50 2 3.00 28.260 15 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 8.0 1.00 2 2.00 3.768 16 Plate for Nozzle neck SA 537 Cl.2 12000 2500 16.0 1.00 2 2.00 7.536 17 Plate for manway cover / bolting flange SA 537 Cl.2 12000 2500 20.0 0.15 2 0.30 1.413 18 Plate for wind girder A 36 12000 2500 8.0 2.00 2 4.00 7.536 19 Miscellaneous - Platform & Stair A 36 12000 2500 5.0 3.00 2 6.00 7.065
Total w.t (A) for 2 Tanks 1199.920
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
API620 J60-D-0241 242 Page 186 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0241 & 0242 Tank Dia 29000 mm MDMT
PRODUCT Isomerate Tank Ht 22000 mm Des. Tem.
Type: IFR with dome Specific gravity 0.618 Des. Pres.
Corrosion allowance 3.2 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 91106 2 17.70 3.225 2 Stairways and platform A 36 20.00 2 40.000 3 Top wind girder / walkway A 36 16.00 2 32.000 4 Roof structure A 36 45.00 2 90.000 5 Miscellaneous w.t A 36 5.00 2 10.000
C Pipe1 2" Pipe SA106 Gr B 925000 - - 1.00 2 7.47 13.820 2 4" Pipe SA106 Gr B 10500 - - 1.00 2 22.30 0.468 3 6" Pipe SA106 Gr B 1000 - - 1.00 2 42.50 0.085 4 8" Pipe SA106 Gr B 24000 - - 1.00 2 64.57 3.099
D Flange1 2" Nozzle - 150 # A 105 6 2 2.30 0.028 2 3" Nozzle - 150 # A 105 3 2 3.70 0.022 3 4" Nozzle - 150 # A 105 3 2 5.90 0.035 4 6" Nozzle - 150 # A 105 3 2 8.60 0.052 5 8" Nozzle - 150 # A 105 2 2 13.70 0.055 6 12" Nozzle - 150 # A 105 1 2 29.00 0.058 7 18" Nozzle - 150 # A 105 1 1 59.00 0.059
Total w.t (B+C+D) for 2 Tanks 193.006 Mt
Grand total (A+B+C+D) 2 Tanks 1392.926 Mt
With 5% margin 2 Tanks 1462.572 Mt
Pipe Lenth (mm) Qty
No of tanks
API620 J60-D-0241 242 Page 187 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
50 kPa
Total PriceRemarks
USD
API620 J60-D-0241 242 Page 188 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
50 kPa
API620 J60-D-0243 Page 189 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0243 Tank Dia 44000 mm MDMT
PRODUCT Isomerate / MTBE Tank Ht 22000 mm Des. Tem.
Type: IFR with CS dome Specific gravity 0.736 Des. Pres.
Corrosion allowance 3.2 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 537 Cl.2 12000 2500 58.00 12.00 1 12.00 163.908 2 Tank shell 2nd course SA 537 Cl.2 12000 2500 54.00 12.00 1 12.00 152.604 3 Tank shell 3rd course SA 537 Cl.2 12000 2500 50.00 12.00 1 12.00 141.300 4 Tank shell 4th course SA 537 Cl.2 12000 2500 45.00 12.00 1 12.00 127.170 5 Tank shell 5th course SA 537 Cl.2 12000 2500 42.00 12.00 1 12.00 118.692 6 Tank shell 6th course SA 537 Cl.2 12000 2500 38.00 12.00 1 12.00 107.388 7 Tank shell 7th course SA 516 Gr.70 12000 2500 38.00 12.00 1 12.00 107.388 8 Tank shell 8th course SA 516 Gr.70 12000 2500 34.00 12.00 1 12.00 96.084 9 Tank shell 9th course (Top) SA 516 Gr.70 12000 2000 30.00 12.00 1 12.00 67.824
10 Tank Bottom Plate SA 516 Gr.70 12000 2500 10.0 49.50 1 49.50 116.573 11 Annular plates SA 516 Gr.70 12000 2500 14.0 8.00 1 8.00 26.376 12 Dome roof SA 516 Gr.70 12000 2500 14.0 50.00 1 50.00 164.850 13 Compression plate SA 516 Gr.70 12000 2500 38.0 8.00 1 8.00 71.592 14 Plate for RF pad of Nozzles & Manways SA 537 Cl.2 12000 2500 40.0 1.50 1 1.50 14.130 15 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 8.0 1.00 1 1.00 1.884 16 Plate for Nozzle neck SA 537 Cl.2 12000 2500 15.0 1.00 1 1.00 3.533 17 Plate for manway cover / bolting flange SA 537 Cl.2 12000 2500 20.0 0.15 1 0.15 0.707 18 Plate for wind girder A 36 12000 2500 8.0 2.50 1 2.50 4.710 19 Miscellaneous - Platform & Stair A 36 12000 2500 5.0 3.00 1 3.00 3.533
Total w.t (A) for 1 Tanks 1490.244
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
API620 J60-D-0243 Page 190 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0243 Tank Dia 44000 mm MDMT
PRODUCT Isomerate / MTBE Tank Ht 22000 mm Des. Tem.
Type: IFR with CS dome Specific gravity 0.736 Des. Pres.
Corrosion allowance 3.2 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 138230 1 17.70 2.447 2 Stairways and platform A 36 22.20 1 22.200 3 Top wind girder / walkway A 36 24.00 1 24.000 4 Roof structure A 36 110.00 1 110.000 5 Miscellaneous w.t A 36 5.00 1 5.000
C Pipe1 2" Pipe SA106 Gr B 925000 - - 1.00 1 7.47 6.910 2 4" Pipe SA106 Gr B 10500 - - 1.00 1 22.30 0.234 3 6" Pipe SA106 Gr B 1000 - - 1.00 1 42.50 0.043 4 8" Pipe SA106 Gr B 24000 - - 1.00 1 64.57 1.550
D Flange1 2" Nozzle - 150 # A 105 6 1 2.30 0.014 2 3" Nozzle - 150 # A 105 3 1 3.70 0.011 3 4" Nozzle - 150 # A 105 3 1 5.90 0.018 4 6" Nozzle - 150 # A 105 3 1 8.60 0.026 5 8" Nozzle - 150 # A 105 2 1 13.70 0.027 6 12" Nozzle - 150 # A 105 1 1 29.00 0.029 7 18" Nozzle - 150 # A 105 1 1 59.00 0.059
Total w.t (B+C+D) for 1 Tanks 172.567 Mt
Grand total (A+B+C+D) 1 Tanks 1662.811 Mt
With 5% margin 1 Tanks 1745.951 Mt
Pipe Lenth (mm) Qty
No of tanks
API620 J60-D-0243 Page 191 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
100 kPa
Total PriceRemarks
USD
API620 J60-D-0243 Page 192 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
100 kPa
API620 J60-D-00901 902 905 Page 193 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0901 &0902 & 0905 Tank Dia 18000 mm MDMT
PRODUCT Light slops Tank Ht 22000 mm Des. Tem.
Type: IFR with Cone Specific gravity 0.858 Des. Pres.
Corrosion allowance 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) SA 516 Gr.70 12000 2500 25.00 5.00 3 15.00 88.313 2 Tank shell 2nd course SA 516 Gr.70 12000 2500 22.00 5.00 3 15.00 77.715 3 Tank shell 3rd course SA 516 Gr.70 12000 2500 20.00 5.00 3 15.00 70.650 4 Tank shell 4th course SA 516 Gr.70 12000 2500 18.00 5.00 3 15.00 63.585 5 Tank shell 5th course SA 516 Gr.70 12000 2500 25.00 5.00 3 15.00 88.313 6 Tank shell 6th course SA 516 Gr.70 12000 2500 14.00 5.00 3 15.00 49.455 7 Tank shell 7th course SA 516 Gr.70 12000 2500 12.00 5.00 3 15.00 42.390 8 Tank shell 8th course SA 516 Gr.70 12000 2500 10.00 5.00 3 15.00 35.325 9 Tank shell 9th course (Top) SA 516 Gr.70 12000 2000 8.00 5.00 3 15.00 22.608
10 Tank Bottom Plate SA 516 Gr.70 12000 2500 8.0 7.50 3 22.50 42.390 11 Annular plates SA 516 Gr.70 12000 2500 14.0 4.00 3 12.00 39.564 12 Cone roof SA 516 Gr.70 12000 2500 24.0 7.00 3 21.00 118.692 13 Compression Plate SA 516 Gr.70 12000 2500 32.0 4.00 3 12.00 90.432 14 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 25.0 1.50 3 4.50 26.494 15 Plate for RF pad of Nozzles & Manways SA 516 Gr.70 12000 2500 8.0 1.00 3 3.00 5.652 16 Plate for Nozzle neck SA 516 Gr.70 12000 2500 16.0 1.00 3 3.00 11.304 17 Plate for manway cover / bolting flange SA 516 Gr.70 12000 2500 20.0 0.15 3 0.45 2.120 18 Plate for wind girder A 36 12000 2500 8.0 1.00 3 3.00 5.652 19 Miscellaneous - Platform & Stair A 36 12000 2500 5.0 3.00 3 9.00 10.598
Total w.t (A) for 3 Tanks 891.250
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos)
Wt. (MT)Length
(mm)
API620 J60-D-00901 902 905 Page 194 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
TANK TAG NO . J60-D-0901 &0902 & 0905 Tank Dia 18000 mm MDMT
PRODUCT Light slops Tank Ht 22000 mm Des. Tem.
Type: IFR with Cone Specific gravity 0.858 Des. Pres.
Corrosion allowance 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle ( 100 x 100 x 12) A 36 56549 3 17.70 3.003 2 Stairways and platform A 36 16.00 3 48.000 3 Top wind girder / walkway4 Roof structure A 36 35.00 3 105.000 5 Miscellaneous w.t A 36 5.00 3 15.000
C Pipe1 2" Pipe SA106 Gr B 90000 - - 1.00 3 7.47 2.017 2 4" Pipe SA106 Gr B 16000 - - 1.00 3 22.30 1.070 3 6" Pipe SA106 Gr B 1000 - - 1.00 3 42.50 0.128 4 8" Pipe SA106 Gr B 23200 - - 1.00 3 64.57 4.494
D Flange1 2" Nozzle - 150 # A 105 12 3 2.30 0.083 2 4" Nozzle - 150 # A 105 4 3 5.90 0.071 3 6" Nozzle - 150 # A 105 2 3 8.60 0.052 4 8" Nozzle - 150 # A 105 6 3 13.70 0.247 5 18" Nozzle - 150 # 1 59.00
Total w.t (B+C+D) for 3 Tanks 179.163 Mt
Grand total (A+B+C+D) 3 Tanks 1070.413 Mt
With 5% margin 3 Tanks 1123.934 Mt
Pipe Lenth (mm) Qty
No of tanks
API620 J60-D-00901 902 905 Page 195 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
120 Deg. C
50 kPa
Total PriceRemarks
USD
API620 J60-D-00901 902 905 Page 196 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
120 Deg. C
50 kPa
EPC- 5 Page 197 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
EPC - 5
MTO FOR STEEL STORAGE TANKS
GENERAL NOTES & ASSUMPTIONS1 The plate thicknesses are calculated as per Design Code API 650 11th Edition Add 3 and API 620 as specified in data sheet.
2 All instrument connection nozzles are assumed as 2" size for MTO.
3 Nozzles above 10" are assumed as plate fabricated.
4 All tanks with diameter > 25m, 5% margin considered on total weight .
5 All tanks with diameter < 25m, 5-10% margin considered on total weight and 2.5% margin considered for Spherical tanks.
6
7 Material supplier shall consider exact thickness specified in MTO and if order quantity is less, nearest standard thickness at higher side may be considered.
8 Aluminum Dome roof weight is not included in MTO and cost of Al Dome shall be obtained from the supplier / vendor.
9 Insulation material quantity not included.
10 All internal & external painting quantity and cost to be considered separatly .
11 Floating roof primary & secondary seals, roof deck drain, bleeder vent, flame arrester, tank mixer etc… are not included in the MTO, the same shall be considered for quote purpose.
12 Tank farm area stand alone platform and connecting platform between the tanks are not included in MTO.
13 Assumption for Platform steel weights : 250 kg/m for spiral Stair way, 50 kg/m for caged ladder, 150 kg/m for roof top platform and 175kg/m for top wind Girder walkway.
Calculated shell, bottom, roof plate thickness are rounded to nearest standard plate thickness (In MTO, the thickness that are revised to standard thickness is highlighted in yellow)
EPC- 5 Page 198 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
EPC- 5 Page 199 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
Floating roof primary & secondary seals, roof deck drain, bleeder vent, flame arrester, tank mixer etc… are not included in the MTO, the same shall be considered for quote purpose.
EPC- 5 Page 200 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
EPC5 J60-D-0101 to 0107 Page 201 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
Tank Tag No. J60-D-0101 to 107 Tank Dia 106000 mm MDMT
Product Crude Oil Storage tanks Tank Ht 23500 mm Des. Tem.
Type External Floating roof Specific gravity 0.873 Des. Press.
Corrosion Allowa. 1.6 mm
MTO
S.No. Description MaterialSize (All Dim. in mm) Unit Price
Width (mm) Thk (mm) USD
A PLATES1 Tank shell 1st course (Bottom) A537 Cl 2 12000 3000 45.00 28.00 7 196.00 2492.5322 Tank shell 2nd course A537 Cl 2 12000 3000 42.00 28.00 7 196.00 2326.3633 Tank shell 3rd course A537 Cl 1 12000 2500 36.00 28.00 7 196.00 1661.6884 Tank shell 4th course A537 Cl 1 12000 2500 30.00 28.00 7 196.00 1384.7405 Tank shell 5th course A 516 Gr 70 12000 2500 30.00 28.00 7 196.00 1384.7406 Tank shell 6th course A 516 Gr 70 12000 2500 20.00 28.00 7 196.00 923.1607 Tank shell 7th course A 36 12000 2500 16.00 28.00 7 196.00 738.5288 Tank shell 8th course A 36 12000 2500 10.00 28.00 7 196.00 461.5809 Tank shell 9th course (Top) A 36 12000 2500 10.00 28.00 7 196.00 461.580
10 Tank Bottom Plate A 36 12000 2500 8.00 300.00 7 2,100.00 3956.40011 Annular plates A 516 Gr 70 12000 2500 22.00 15.00 7 105.00 544.005
12 Plate for RF pad of Nozzles & Manways A537 Cl 2 12000 2500 45.00 1.50 7 10.50 111.27413 Plate for RF pad of Nozzles & Manways A 36 12000 2500 5.00 1.00 7 1.00 1.17814 Plate for Nozzle neck A537 Cl 2 12000 2500 14.00 2.00 7 14.00 46.15815 Plate for manway cover / bolting flange A537 Cl 2 12000 2500 22.00 0.10 7 0.70 3.62716 Plate for wind girder A 36 12000 2500 6.00 6.00 7 42.00 59.34617 Miscellaneous - Platform & stair A 36 12000 2500 5.00 3.00 7 21.00 24.728
Double Deck Floating roof18 Plate for deck bottom A 36 12000 2500 8.00 292.00 7 2,044.00 3850.89619 Plate for deck top A 36 12000 2500 5.00 292.00 7 2,044.00 2406.81020 Plate for Rim outside A 36 12000 2500 14.00 13.82 7 96.74 318.95221 Plate for Rim inside A 36 12000 2500 5.00 20.11 7 140.77 165.75722 Plate for Rim inside A 36 12000 3000 5.00 21.54 7 150.78 213.05223 Compartment plate A 36 12000 2500 5.00 14.64 7 102.48 120.67024 Plate for foam dam rim A 36 12000 2500 5.00 18.43 7 129.01 151.90925 Leg wear plate A 36 12000 2500 5.00 1.60 7 11.20 13.18826 Compartment manhole A 36 12000 2500 8.00 5.94 7 41.58 78.337
Total w.t for 7 Tanks 23901.196
Plate QTY(Nos)
No. of Tanks
No. Tanks x Plate QTY(Total Nos of plates)
Wt. (MT)Length
(mm)
EPC5 J60-D-0101 to 0107 Page 202 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
Tank Tag No. J60-D-0101 to 107 Tank Dia 106000 mm MDMT
Product Crude Oil Storage tanks Tank Ht 23500 mm Des. Tem.
Type External Floating roof Specific gravity 0.873 Des. Press.
Corrosion Allowa. 1.6 mm
S.No Description Material W.t (MT) Unit W.t (kg/m) Total w.t(MT)
B Structurals1 Curb Angle (100 x 100 x 12) A 36 333009 7 17.70 41.2602 Stairways and platform A 36 6.60 7 46.2003 Top wind girder / walkway A 36 58.28 7 407.9604 Roof structure - 0.00 - 0.0005 Floating roof structurals A 36 32.00 7 224.0006 Rolling ladder A 36 1.02 7 7.1407 Miscellaneous attachments, pipe support etc. A 36 10.000
C Pipe1 2" Pipe SA106 Gr.B 3000 - - 1.00 7 7.47 0.1572 4" Pipe SA106 Gr.B 91000 1.00 7 22.30 14.2053 6" Pipe SA106 Gr.B 124000 - - 1.00 7 42.50 36.8904 8" Pipe SA106 Gr.B 46000 - - 1.00 7 64.57 20.7925 Deck supports ( 4" sleeve & 3" support) SA106 Gr.B 9.40 1.00 7 65.800
D Flange1 2" Nozzle - 150 # A 105 19 7 2.30 0.3062 4" Nozzle - 150 # A 105 9 7 5.90 0.3723 6" Nozzle - 150 # A 105 12 7 8.60 0.7224 8" Nozzle - 150 # A 105 4 7 13.70 0.3845 14" Nozzle - 150 # A 105 2 7 59.00 0.8266 36" Nozzle - 150 # A 105 4 7 205.00 5.7407 48" Nozzle - 150 # A 105 1 7 428.00 2.9968 Fittings, Bolts & Nuts A 105 2 7 14.000
Total w.t (B+C+D) for 7 Tanks 899.749 Mt
Grand total (A+B+C+D) 7 Tanks 24800.945 Mt
With 5% margin 7 Tanks 26040.993 Mt
Pipe Lenth (mm) Qty
No of tanks
EPC5 J60-D-0101 to 0107 Page 203 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
MTOTotal Price
RemarksUSD
EPC5 J60-D-0101 to 0107 Page 204 of 206
JAZAN REFINERY AND MARINE TERMINAL PROJECT, SAUDI ARABIA
16 Deg.C
75 Deg. C
3 kPa
NA
AKAZ 2 x 125 MW 9E GAS POWER PLANTAL ANBAR PROVENCE, IRAQ
Consolidated MTO for Plates Date :
S.No. Description MaterialSize (all dim. in mm)
RemarksThk (mm)
1 Plates ASTM A36 12000 2500 12 28 79.128
2 Plates ASTM A36 12000 2500 10 107 251.985
3 Plates ASTM A36 12000 2500 8 131 246.804
4 Plates ASTM A36 12000 2200 8 13 21.553
5 Plates ASTM A36 12000 2000 8 18 27.130
6 Plates for shell Manways flange & cover plate ASTM A36 8000 2000 18 1 2.261
7 Plates for anchor chair ASTM A36 8000 2500 30 1
7 Plates for anchor chair ASTM A36 8000 2500 36 1 5.652
8 Plates for Anchor chair Gusset ASTM A36 12000 2500 16 1 3.768
Following plate quantaties are newly added
9 Plates for Nozzles ASTM A36 12000 2500 14 1 3.297
10 Plates for Nozzles ASTM A36 12000 2500 12 1 2.826
11 Plates for Nozzles ASTM A36 12000 2500 10 2 4.710
12 Plates for Nozzles ASTM A36 12000 2500 8 3 5.652
13 Plates for Roof Structure ASTM A36 12000 2500 28 1 6.594
14 Plates for Roof Structure ASTM A36 12000 2500 22 1 5.181
15 Plates for Roof Structure ASTM A36 12000 2500 18 1 4.239
16 Plates for Roof Structure ASTM A36 12000 2500 16 3 11.304
17 Plates for Roof Structure ASTM A36 12000 2500 12 12 33.912
18 Plates for Roof Structure ASTM A36 12000 2500 8 2 3.768
Total weight = 719.763 Metric Tons
Note :
1. This MTO is for Plates which includes Tank Shell Plates, Bottom Plates, Roof Plates and RF Pads for Nozzles / Manways.
2. Nozzles Pipes, Nozzle Flanges, Bolts & Nuts and other miscellaneous items are not considered, please refer detail drawings for the MTO.
3. Thickness of Plates are calculated as per Design Code and Corrosion Allowance 3.0 mm considered as per NIT requirement.4. Negative tolerance of plate size and thickness are not acceptable.5. For required thickness > 13mm, Material shall be impact tested considering MDMT.
QTY(Nos)
Wt. (MT)Length
(mm)Width (mm)
Anchor chair top plate thickness revised to 36 mm
17-March-12
Remarks
Metric Tons
Page 1 of 6
Anchor chair top plate thickness revised to 36 mm