JCB Inc. - Pricelist December 2013 STS # 800126 Inc. - Pricelist December 2013 STS # 800126 Please...

JCB Inc. - PricelistDecember 2013STS # 800126

Please note: All Contract terms and conditions shall supersede any terms provided in the contractor

price catalog. All shipments under the contract are FOB Destination – Prepaid.

SSL/CTL Discount Mini-Excavators Discount

135 15% 8008 20%

150T 15% 8018 22%

155 15% 8025 20%

175 15% 8030 22%

190 15% 8035 22%

190T 15% 8040 22%

205 15% 8045 30%

205T 15% 8055 20%

225 15% 8065 20%

225T 15% 8085 28%

260 15% Excavators Discount

260T 15% JS145 23%

280 15% JS160 23%

300 15% JS190 23%

300T 15% JS220 21%

320T 15% JS260 23%

330 15% JS330 20%

Telescopic Handlers Discount JS360 20%

515-40 15% Backhoe Discount

520-40 26% Midi CX 18%

520-50 29% 2CX-12 25%

524-50 26% 3CX-14 20%

527-55 26% 3CX-14 Super 31%

531-70 26% 3CX-15 Super 32%

531-70T 23% 3CX-17 Super 40%

535-140 25% 4CX-14 Super 28%

541-70T 22% 4CX-15 Super 32%

550-140 27% 4CX-17 Super 40%

550-170 25% Compaction Discount

506-36 20% VM1500 25%

507-42 20% VMT160-90 20%

509-42 20% VMT260-100 30%

510-56 22% VMT260-120 30%

512-56 22% VM75D 28%

514-56 22% VM75PD 28%

Wheel Loaders Discount VM115D 30%

406 27% VM115PD 30%

409 27% VM132D 30%

411 30% VM132PD 30%

416 30% Fastrac Discount

417 30% 3230 XTRA 22%

427HT 30% 8280 22%

427ZX 30% 8310 22%

STS# 800126 - 2013 JCB Pricing Structure

437HT 30% RTFL Discount

437ZX 30% 930-2 30%

457HT 30% 930-4 32%

457ZX 30% 940-2 26%

TM320 15% 940-4 28%

Workmax Discount 950-4 32%

800D 20%

Backhoe Loader

JCB BACKHOE LOADER

MIDI CX

JCB Inc. North American

MACHINE PRICE LIST

in U.S. Dollars

CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR. PLEASE REFER TO THE

"WHAT'S NEW" SECTION FOR A COMPLETE LIST OF UPDATES.

EFFECTIVE: MAY 1, 2013

MIDI CX U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GAEFFECTIVE: MAY 1, 2013

STANDARD EQUIPMENT

SAFETY Four post Roll Over Protection structure (ROPS), Falling Objects Protective Structure (FOPS).

Retractable seat belt. Equipped with independent over center park brake and loader service safety strut.

Fuel and Hydraulic tank fitted with lockable caps. Backhoe is equipped with, boom lock activated from

the operator area as well as a swing lock. Front and rear horn. Automatic reverse alarm.

ENGINE Water cooled, 4 cylinder, direct injection Tier III diesel engine with 2 valves per cylinder. Equipped with cold

start aid. Hand and foot operated throttle, 50 gross hp. Duel element dry type air cleaner.

Full flow pressure engine oil lubrication with spin on oil filter. Separately serviceable air to fluid radiator.

Fuel system with two stage filtration, utilizing water/sediment separator and spin on secondary fuel filter.

TRANSMISSION Separate unit mounted to the engine, Switchable 2 speed hydrostatic unit, connected to the front and rear

axles via drive shafts. 2 Speeds in forward and reverse, column mounted electrical forward / reverse

shuttle (no clutch required to change direction). Air to fluid transmission cooler, Pressure lubrication with spin on

spin on oil filter.

FRONT AXLE 4 WD front axle. Industrial duty with outboard planetary final reduction drives. Hydrostatic power

steering with priority valve steering cylinder is located high and behind the axle for maximum protection.

REAR AXLE Separate heavy duty axle mounted to the frame of the machine and connected to the transmission via

drive shafts. Final drives out board mounted planetary gear design. JCB Max-Trac limited slip differentials.

BRAKES Sealed wet multi disc type service brakes independent of the park brake, brakes can be independently

operated or locked together via a lock bar mounted on the brake peddles. Over center actuation

mechanical park brake that disconnects the transmission.

STEERING Hydrostatic power steering with priority valve. Steering wheel lock to lock is 2.5 turns. Steering cylinder is

mounted high and behind the front axle for protection. Turning circle 11'8"

BACKHOE AND Removable centermount 10' dig depth backhoe with fixed dipper including fabricated boom and dipper,

MAINFRAME stabilizers mounted to the rear frame. All hoses routed through the king post. Dipper breakout 4,548 lbs

and bucket breakout capable of 6,025 lbs.

LOADER Equipped with an integrally mounted front end loader using two lift cylinders and two bucket cylinders.

Standard skid steer quick attach system, mechanical anti spill design. Loader pin height is 9' 6".

Lift capacity 3,478 lbs and bucket breakout of 5,830 lbs.

All prices and specifications subject to change without notice page 2 of 6 MIDI CX USD Price Page

MIDI CX U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT (CONT.)

ELECTRICAL SYSTEM 12 volt system with 65 amp alternator all electrical connections are to IP69 standards. Single

maintenance free battery rated at 680 cold cranking amps. Two halogen work lights front and rear

including turn signals, equipped with four way hazards as standard. Backlit instrumentation panel

mounts on the side dash consisting of tachometer, fuel gauge and digital hour meter. Warning lights

for battery charge, coolant temperature, engine oil pressure, transmission oil temperature, transmission

oil pressure, air cleaner restriction, water in fuel, parking brake engaged. Battery isolator as standard.

OPERATORS FOPS (Falling Objects Protection) and ROPS (Roll Over Protection) open canopy, entry from both sides,

ENVIRONMENT full floor mat , interior rear view mirror, static vinyl seat with adjustment for leg support, back angle,

forward and back with turn around. Two inch retractable seatbelt. cup holder.

HYDRAULIC SYSTEM Three hydraulic pumps, one transmission charge pump, one transmission hydrostatic pump and one

hydraulic gear pump for services. Externally mounted hydraulic pannier tank with lockable cap. Structural

steel pipes where possible and hoses have burst pressure 4 times higher than working pressure. Service

pump output is 19.8 gpm.

SERVICEABILITY All service check points are done at ground level, engine oil check and top off, transmission check and

AND MAINTENANCE top off, brake fluid check, windshield check, fuel fill and hydraulic check and top off. Easy opening one

piece hood, with lockable grill.

SECTIONS ARE ORGANIZED AS FOLLOWS:

Section 1 - PACKAGE BUILD

Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS

Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS

Section 4 - ATTACHMENTS - NOT CURRENTLY OFFERED

DEALER FIT - BACKHOE LOADERS (LISTED SEPARATELY FOR ALL BACKHOES)


U.S. DOLLAR

PRICE PAGES

F.O.B.


SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS

CANOPY PACKAGE BUILD CODE: 2920A 2920B

SALES 3 PT HITCH

CODE ITEM PTO

2920 MIDI CX 10ft removable centermount backhoe, 50Hp diesel engine

100A503 Centermount 10ft fixed dipper with bi-directional / hammer pipework

100A506

100B501 10 x 16.5 Front tires and 17.5 x 24 rear tires - Industrial traction tires

100C502 Open ROPS and FOPS Canopy with front windshield and fixed vinyl Seat

100D302 12" Backhoe bucket

100E501 GP bucket - 0.46 cu.yd.

100F528 Operator Manual Pack - English

100R501 Loader Auxilary circuit for non PTO builds

100R503 Loader Auxilary circuit for PTO builds

100X501 Reverse Alarm

100P501 Bolt on cutting edge

SUGGESTED LIST PRICE $55,250 $58,092

CAB PACKAGE BUILD CODE: 2920C 2920D

SALES 3 PT HITCH

CODE ITEM PTO

2920 MIDI CX 10ft removable centermount backhoe, 50Hp diesel engine

100A523 Centermount 10ft fixed dipper with bi-directional / hammer pipework

100A526

100B501 10 x 16.5 Front tires and 17.5 x 24 rear tires - Industrial traction tires

100C503 ROPS and FOPS Cab with suspension seat

100D302 12" Backhoe bucket

100E501 GP bucket - 0.46 cu.yd.


100R501 Loader Auxilary circuit for non PTO builds

100R503 Loader Auxilary circuit for PTO builds

100X501 Reverse Alarm

100P501 Bolt on cutting edge


MIDI CX

Centermount 10ft fixed dipper with bi-directional / hammer pipework, three point hitch, PTO

and creep speed

Centermount 10ft fixed dipper with bi-directional / hammer pipework, three point hitch, PTO

and creep speed

Select one of the following machine PACKAGE BUILD codes. Package build configurations cannot normally be changed. If

a Package Build does not meet your requirements please order a machine using the Custom Build Section, Options &

Attachments Sections following.


U.S. DOLLAR

PRICE PAGES

F.O.B.


SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS:

SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)

2920 MIDI CX 10ft removable centermount backhoe, 50Hp diesel engine $41,875

100A501 $1,137

100A502 $3,411

100A503 $1,707

100A504 $3,980

100A505 $3,980

100A506 $4,549

100A509 ($6,002)

100A521 $1,137

100A522 $3,411

100A523 $1,707

100A524 $3,980

100A525 $3,980

100A526 $4,549

100A509 ($6,002)

WHEELS AND TIRES (E)

100B501 10 x 16.5 Front tires and 17.5 x 24 rear tires - Industrial traction tires $3,298

100B502 10 x 16.5 Front tires and 17.5 x 24 rear tires - Turf tires $3,866

OPERATOR'S ENCLOSURE (E)

100C502 Open ROPS and FOPS Canopy with front windshield and fixed vinyl Seat $4,485

100C503 ROPS and FOPS Cab with suspension seat $5,980

BACKHOE BUCKETS (E)

100D300 NO Excavator Bucket $0

100D301 9" Backhoe bucket $625

100D302 12" Backhoe bucket $740

100D303 14" backhoe bucket $967

100D304 16" backhoe bucket $1,137

100D305 18" Backhoe bucket $1,251

100D306 24" Backhoe bucket $1,535

FRONT BUCKETS (E)

100E500 No Loader bucket $0

100E501 GP bucket - 0.46 cu.yd. $1,707

100E502 6 in 1 bucket - 0.46 cu. Yd. $3,298

OPERATOR'S MANUAL (E)

100F528 Operator Manual Pack - English $0

100F517 Operator Manual Pack - French $0

100F521 Operator Manual Pack - Spanish $0

HYDRAULIC CIRCUIT (E)

100R501 Loader Auxilary circuit for non PTO builds $700

100R502 Loader Auxilary circuit with detent for non PTO builds $796

100R503 Loader Auxilary circuit for PTO builds $700

REVERSE ALARM (E)

100X501 Reverse Alarm $227

BACKHOE FOR CAB BUILDS (E)

Centermount 10ft fixed dipper

MIDI CX

CHOOSE THE CORRECT 'A' CODE DEPENDENT ON THE OPERATOR ENCLOSURE TYPE

BACKHOE FOR CANOPY BUILDS (E)

Centermount 10ft fixed dipper

Centermount 10ft fixed dipper with bi-directional / hammer pipework, three point hitch, PTO and creep speed

"No Backhoe" with three point hitch, PTO and creep speed

"No Backhoe" with three point hitch, PTO and creep speed

Centermount 10ft fixed dipper and three point hitch

Centermount 10ft fixed dipper with bi-directional / hammer pipework

Centermount 10ft fixed dipper with bi-directional / hammer pipework and three point hitch

Centermount 10ft fixed dipper, three point hitch, PTO and creep speed

Centermount 10ft fixed dipper with bi-directional / hammer pipework, three point hitch, PTO and creep speed

Centermount 10ft fixed dipper and three point hitch

Centermount 10ft fixed dipper with bi-directional / hammer pipework

Centermount 10ft fixed dipper with bi-directional / hammer pipework and three point hitch

Centermount 10ft fixed dipper, three point hitch, PTO and creep speed

If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code

from each E (Essential) category below. Select Options from Section 3 if necessary.

JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit

Section to change existing machines.


U.S. DOLLAR

PRICE PAGES

F.O.B.


SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:

SALES U.S.

CODE ITEM LIST

ADDITIONAL BACKHOE BUCKETS

100K302 Bucket - 12" wide 2.0 cu. ft. $740

100K303 Bucket - 14" Wide $967

100K306 Bucket - 24" wide 4.25 cu. ft. $1,535

100K323 Bucket - 18" wide 3.17 cu. ft. $1,252

MISCELLANEOUS OPTIONS

100P501 Bolt on cutting edge $512

STABILIZER RAM GUARDS

100Y501 Stabilizer ram guards $569

OPERATORS AREA

100Z501 Air Conditioning for cab builds $3,738

QUICKHITCH

100K310 Quick Coupler for Backhoe Bucket - MECHANICAL (not compatible w/ Cemetery Buckets) $1,259

MIDI CX

Select Optional Equipment as desired within limitations if indicated.


JCB BACKHOE LOADER

2CX 12FT




JCB, Inc. North American

MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

SAFETY & SECURITY Four post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and

retractable seat belt. Equipped with independent park brake and loader service strut. Rear boom

lock activated from operator's compartment; boom swing lock. Vandalism protection with key lock-

able cab, fuel cap, and steel instrument vandal cover . Front and rear horn buttons. Automatic reversing

alarm.

ENGINE Water-cooled, 4 cyl, direct injection diesel, 268 CID (4.4 liter). Hand and foot throttle.

75 gross hp @ 2200 rpm. Dual element air filter, dry type with cleanable outer element and

replaceable inner element. Full flow pressure engine oil lubrication with spin-on filter

cartridge. Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil

coolers. Two stage fuel filtering system utilizing a water/sediment separator and spin-on type

filter element.

TRANSMISSION Separate unit mounted to engine containing 2.78:1 torque converter and all transmission

components. Connected to rear axle via drive shaft. Manual gear selection with 4 Fwd / 4 Rev

speeds. Synchronized shifts in all gears. Electrically operated shuttle control on column. Electrically

operated transmission disconnect on gear shift and loader levers. Pressure lubrication with spin on

cartridge filter.

FRONT AXLE 4WD - JCB Max-Trac steer drive torque proportioning, outboard planetary reduction axle, steering

cylinder located behind front axle. 13200 lb. Static load rating: 6600 lb. Dynamic load rating;

10487 lb. SAE J43.

REAR AXLE Separate, rigidly mounted to mainframe & connected to transmission via drive shaft. Heavy duty

double reduction, outboard planetary gear final reduction. 4WD - JCB Max-Trac drive

torque proportioning, outboard planetary reduction axle, steering cylinder located in front of rear

axle. 13200 lb. Static load rating; 6600 lb. Dynamic load rating; 10220 lb. SAE J43.

BRAKES Sealed wet multiple disc. Brake pedals can be independently operated or locked together.

Hydraulically actuated with 5 discs per brake. Over center actuation 11" disc type park brake.

Transmission shifts to neutral when park brake is activated.

STEERING Hydrostatic power, with priority valve. Steering wheel lock to lock equals 4 turns Unbraked

turning circle 23' 9".

BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sideshift frame with 3' 3"

MAINFRAME kingpost offset capability and vertical stabilizers. Mainframe and stabilizers within loader bucket

width. Fabricated equal length boom and dipper. SAE Maximum dig depth: 12'; Rear Auxiliary

hydraulics (1-way flow); All backhoe hoses routed through king post with junction plate.

LOADER Equipped with integrally mounted front end loader using two lift cylinders and two bucket dump

cylinders. Parallel lift standard using mechanical self leveling during loader raise and lower functions.

Dump height: 7' 11", Load over height - 9' 10". Auxiliary loader hydraulics and hydraulic quickhitch

standard. Dump reach at full height: 33". Lift capacity to full height: 4850 lbs.

2CX 12FT BACKHOE LOADER

All prices and specifications subject to change without notice page 2 of 7 2CX 12FT USD Price Page

U.S. DOLLAR

PRICE PAGES

F.O.B.



ELECTRICAL SYSTEM 12 volt system with 95 amp alternator std. Wiring harness & outside cab connectors meet IP69

standard for protection against ingress of dust, and pressure spray of 4.23 gpm at 1450 psi.

Inside cab connectors meet IP67 standard for protection against ingress of dust, and water

when submerged. Single, maintenance free battery rated at 900 cold cranking amps. Four

halogen work lights in front and two separate halogen work lights in the rear. Stop lights,

turn signals, and four way hazards standard. Backlit gauges and readouts consisting of a

tachometer, fuel gauge, engine coolant temperature gauge and digital hour meter. Light and

alarm for battery charge condition, coolant temp., engine oil pressure, transmission

oil pressure, transmission oil temp., air cleaner restriction, and park brake engaged. Light

indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt

outlet for powered accessories. Battery isolator as standard.

OPERATORS Suspension seat with adjustments for weight, seat angle, back angle and retractable seat belt.

ENVIRONMENT standard. Left side entry, full floor mat, fixed steering column, exterior mirrors, pre-wired for

beacon, cup holders, storage compartment. Cab also incl. operable right side window, one piece rear

window to open overhead. Operator ear noise level at 78 dba at rated speed no load. Heater with

defogger vents. SAE Backhoe controls

HYDRAULIC SYSTEM Open center system with one engine driven gear pump. Separate oil reservoir not shared with

other systems, externally mounted to mainframe for ground level servicing. Abrasion protection of

valve to boom hoses. Hoses have burst pressure of 4 times working pressure. Structural steel pipes to

withstand minor impacts. Pump output 17 gpm @ 3335psi.

SERVICEABILITY Check for engine and transmission oil, brake fluid, engine coolant, and windshield washer levels.

AND MAINTENANCE Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid, fuel, and engine

coolant. Tilt engine hood with fine mesh front grill. 22 gallon fuel tank.

15.3 gallon hydraulic tank with 10 micron filter. 500 hr engine oil and filter service

interval. 2000 hour hydraulic oil and 500 hour hydraulic filter service interval.



Section 1 - PACKAGE BUILDS



Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS

DEALER FIT - BACKHOE LOADERS (LISTED SEPARATELY FOR ALL BACKHOES)


F.O.B.



PACKAGE BUILD CODE: 0282A 0282BSALES 2CX 12FT 2CX 12FT

CODE ITEM CAB CANOPY

0282 2CX 12FT, Sideshift Backhoe Base Machine

100A350 Four Wheel Steer Tire Indicator

100B324 Goodyear Traction Tire 12.5 x 18

100C325 CAB - Deluxe, left side entry ROPS/FOPS

100Y102 Floormat for Cab builds (order with C325)

100X314 Block Heater (for use w/ CAB machines only)

100C327 CANOPY with front windshield and floor mat

100Y100 Floormat for Canopy builds (order with C327)


100D300 NO Excavator Bucket

100E413 Loader Bucket - General Purpose, 1.0 yard, 77 " wide

100P306 Bolt-On Cutting Edge (for 1.0 cu. yd. 77" bucket)

100Y321 ISO Excavator



Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) from the section at the bottom of this

sheet. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements

please order a machine using the Custom Build, Options & Attachments Sections following.


F.O.B.



SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)

0282 2CX 12FT, Sideshift Backhoe Base Machine $71,103

TIRES (E) Order "100A350" and one "100B" code.

100A350 Four Wheel Steer Tire Indicator $0

100B324 Goodyear Traction Tire 12.5 x 18 $2,751

100B323 Michelin XMCL Radial Traction Tire 340/80 x 18 $3,937

100B332 Goodyear Turf Tire 340 / 65 x 18 $4,379

OPERATORS AREA Order one 100C and one 100Y code.

100C325 CAB - Deluxe, left side entry ROPS/FOPS $6,836

100C327 CANOPY with front windshield and floor mat $4,379

100Y102 Floormat for Cab builds (order with C325) $0

100Y100 Floormat for Canopy builds (order with C327) $0

BACKHOE BUCKETS

100D300 NO Excavator Bucket $0

100D320 Bucket - 9" wide 1.5 cu.ft. $669

100D321 Bucket - 12" wide 2.0 cu. ft. $741

100D323 Bucket - 18" wide 3.17 cu. ft. $1,156

100D324 Bucket - 24" wide 4.25 cu. ft. $1,503

LOADER BUCKETS

100E300 No Loader bucket $0

100E411 Loader Bucket - General Purpose, 0.8 yard, 73 " wide $1,486

100E413 Loader Bucket - General Purpose, 1.0 yard, 77 " wide $1,733

100E415 Loader Bucket - 6 in 1 - 0.8 yard, 73" wide $4,425

OPERATORS HANDBOOK (E)

100F328 Operator Manual Pack - English $0


BACKHOE CONTROLS

100Y321 ISO Excavator $106



from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.




U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

POWERTRAIN OPTIONS

100X314 Block Heater (for use w/ CAB machines only) $154

100Y401 Pre-Cleaner $174

100W304 Axles - Limited Slip Front and Rear $1,447

100Y329 Front wheel fenders for 18in wheels ( NEW FACTORY BUILT ORDERS:) $651

OPERATORS AREA

100X313 Fan - Face Level $161

100Z006 Air Conditioning w/ Vandal Cover (NEW FACTORY BUILT ORDERS ONLY) $4,547

100X323 Driving Lamps and Rear Indicator Lamps - Mid Level $281

HYDRAULICS OPTIONS

100R304 Loader Valve Block - 3 Spool w/ loader bucket return-to-dig $460

100R306 Loader Valve Block - 3 Spool w/ double detent and loader bucket return-to-dig $1,647

100Y419 Smooth Ride System (NEW FACTORY BUILT ORDERS ONLY) $1,693

100V316 $1,146


Hand Held Tool Circuit (NEW FACTORY BUILT ORDERS ONLY)



F.O.B.


SECTION 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS:

SALES U.S.

CODE ITEM LIST

LOADER ATTACHMENTS - For loader Quickhitch

100P304 Bolt-On Cutting Edge (for 0.8 cu. yd. 73" bucket) $543

100P306 Bolt-On Cutting Edge (for 1.0 cu. yd. 77" bucket) $591

100P402 Pallet Forks and Frame - 48" long forks $2,646

100Q107 Quick Hitch Blank (use with JCB approved allied attachments) $863

100Q103 Truss Boom - 2' w/ Hydraulic Winch (uses Quickhitch circuit to operate) $8,117

BACKHOE BUCKETS

100Q117 Cemetery bucket - 30", 6.0 cu. ft. capacity -LESS teeth $1,456

100Q119 Cemetery bucket - 36", 7.4 cu. ft. capacity -LESS teeth $2,240

100K308 Bucket - Grading - 48" wide 2.1 cu. ft. $1,364

BACKHOE BUCKET QUICK COUPLER

100K310 Quick Coupler for Backhoe Bucket - MECHANICAL (not compatible w/ Cemetery Buckets) $1,259

BACKHOE BUCKET LINKS

100Y313 Tipping Link w/ Lift Hook $216

STABILIZER PADS

100Y319 Stabilizer Pad - Street (rubber) $427


Select Attachments as desired within limitations if indicated.


JCB BACKHOE LOADER

3CX-14CENTERMOUNT


MACHINE PRICE LIST

in U.S. Dollars




U.S. DOLLAR PRICE

PAGESF.O.B. SAVANNAH, GA EFFECTIVE: JANUARY 1, 2013

STANDARD EQUIPMENT

SAFETY & SECURITY Two post Roll Over Protective Structure (ROPS), Falling Objects Protective Structure (FOPS) and



able cab, hydraulic fill, fuel cap. All locks operate with ignition key. Front and rear horn buttons.

Automatic backup alarm.

ENGINE 74 HP Turbocharged, water-cooled, 4 cyl, direct injection diesel, 268 CID (4.4 liter) T4i engine.

Hand and foot throttle. Full flow pressure engine oil lubricant with spin-on filter cartridge.

Air to fluid coolers. Separately serviceable radiator, hydraulic and transmission oil coolers.

Two stage fuel filtering system utilizing a water/sediment separator and spin-on type filter element.

Dual element air filter, dry type with cleanable outer element, replaceable inner element and under

hood pre-cleaner.

TRANSMISSION Separate unit mounted to engine containing torque converter and all transmission components.

Pressure lubrication with spin on filter. Electrically operated Fwd / Rev lever on steering column.

Electrically operated transmission. disconnect on gear shift and loader levers. with 4 forward and

4 reverse speeds.

FRONT AXLE 2WD - Industrial duty bar with steering cylinder located behind front axle.

4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD

shift-on-the-go; steering cylinder located behind front axle.


double reduction, outboard planetary gear final reduction. Limited slip differential to provide

automatic equalization of wheel spin under conditions of unequal footing.


Power assisted, hydraulic brakes. Independent over center actuation, park brake.

Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2WD activated by

switch.

STEERING Hydrostatic power, with priority valve. Three steering wheel turns (lock to lock). Unbraked

turning circle 2WD - 26'5", 4WD - 27'2".

BACKHOE AND Unitized, one piece heavy duty mainframe with integral backhoe. Sealed swing post pins and swing

MAINFRAME cylinder pins, 2" top & bottom rear frame plates (centermount). Fabricated boom and dipper.

SAE maximum dig depth: Std dipper - 14' 7", Extradig dipper - 14' 7" - 18' 6". Two lever, JCB (SAE)

backhoe controls. Fabricated stabilizer legs with anti-drift valves.


cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 9' 0".

Bucket return-to-dig standard. Dump reach at full height - 32".


All prices and specifications subject to change without notice page 2 of 8 3CX-14FT USD Price Pages

U.S. DOLLAR PRICE

PAGES

F.O.B. SAVANNAH,

GAEFFECTIVE: JANUARY 1, 2013






halogen work lights in front and four separate halogen work lights in the rear. Stop lights,


tachometer, fuel gauge, engine coolant temperature gauge, digital hour meter and digital clock.

Light and alarm for battery charge condition, coolant temp., engine oil pressure, transmission

oil pressure, transmission oil temp, air cleaner restriction, water in fuel indicator and park brake

engaged. Light indicators for hazard flashers on, turn signals, steering mode, and lights on. 12 volt

outlet for powered accessories. Common fuses and relays located in an easy access panel.

Main circuit breakers at battery positive terminal for added circuit protection.

Battery Isolator as standard.

OPERATORS Fixed vinyl seat standard. Two door entry with deluxe trim. Composite sure grip molded floor,

ENVIRONMENT tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,

interior rear view mirror, pre-wired for beacon, cup holders, storage compartment. Cab also

includes door ajar stays, 14 adj. vents, operable side windows, one piece rear window with

wiper and washer that acts as a shield during inclement weather, heater with defogger vents,

and radio pre-wire with speakers in-cabs.

HYDRAULIC SYSTEM Open center system, triple gear pumps, engine driven, 39 gpm @ 3650 psi. Separate oil

reservoir not shared with other systems, externally mounted to mainframe for ground level

servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times

working pressure. Structural steel pipes to withstand minor impacts.

SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshield

AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, fuel,

and engine coolant. Tilt engine hood and lockable front grill. 15 second

engine manifold preheat (activated through ignition switch). 42.2 gallon fuel tank. 22 gallon

hydraulic tank with 10 micron filter. 500 hour engine oil and filter service interval. 1000 hour trans-

mission oil and 500 hour transmission filter service interval. 2000 hour hydraulic oil and 500 hour

hydraulic filter service interval. External Toolbox.







DEALER FIT - BACKHOES (LISTED SEPARATELY FOR ALL BACKHOES)








U.S. DOLLAR PRICE

PAGESF.O.B. SAVANNAH, GA

EFFECTIVE:

JANUARY 1, 2013

SECTION 1 - PACKAGE BUILDSECTION 1 - PACKAGE BUILDS 3CX (2WS)

PACKAGE BUILD CODE:

Environment: CANOPY CANOPY

Dipper: FIXED EXTRADIG

SALES Drive: 4WD 4WD

CODE ITEM Horse Power: 74HP 74HP

0795 3CX-14, 4WD, CM, 74HP, MAN TRANS. MANUAL CONTROLS

200A003 CANOPY

200B61B 14 x17.5 & 19.5Lx24, R4 Industrial- GALAXY- MANUAL TRANSMISSION WITH LSD

200C710 USA ONLY - for Manual Controls - Canopy

200D314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth

200E308 88" GP Bucket - fixed dipper only

200F072 Operator Manual Pack - American English

200G450 North American Legislation

200H407 Extending Dipper for CM, Manual control 14FT machines

200Y470 400 Lbs. CWT



Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a

machine using the Custom Build, Options & Attachments Sections following.




SECTION 2 - NEW CUSTOM FACTORY BUILT ORDERS: ESSENTIAL FEATURES:

SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)

0794 2WD 74HP FIXED 100 lbs $58,657

0795 4WD 74HP FIXED 100 lbs $60,318

SEAT TYPE

200A003 VINYL, FIX $3,966

200A009 VINYL, FIX $11,071

200A010 VINYL, FIX $15,806

200C710 $0

200C712 $0

200W63H $0

200B60B $4,741

200B61B $6,380

200V096 $0

200V097 $0

200D200 $0

200D311 $1,123

200D312 $1,289

200D314 $1,326

200D315 $1,492

200D316 $1,812

200D317 $2,132

USA ONLY - for Manual Controls - Canopy

HEATER

HEATER & AC

CAB

NO

CAB

3CX-14, 2WD, CM, 74HP, MAN TRANS. MANUAL

3CX-14, 4WD, CM, 74HP, MAN TRANS. MANUAL

ELECTRICAL PACKAGES FOR CAB/CANOPY (E)

NOTE: Prices include AC/Heater. For AC be sure to also order the appropriate Z code.

CAB/CANOPY PACKAGES (E)

HEATER / AC

CANOPY

EFFECTIVE: JANUARY 1,

2013

DRIVEHORSE

POWERDIPPER TYPE

COUNTER

WEIGHT

GALAXY TIRE SETS - 2WD

GALAXY TIRE SETS - 4WD

3CX 14FT BACKHOE LOADER U.S. DOLLAR PRICE PAGES F.O.B. SAVANNAH, GA

11Lx16 & 19.5Lx24, R4,Industrial- GALAXY - MANUAL TRANSMISSION WITH LSD

UPGRADE - To change from fixed dipper to extending dipper , please see H codes below in Section 3- options

Backhoe Bucket - 36" heavy duty, 11.3 cu. Ft.

EXCAVATOR BUCKETS (E) - PICK ONE, for additional buckets, please see K codes in Section 4

No Excavator Bucket



Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth

USA ONLY - for Manual Controls - Cab


BACKHOE RAM SETS (E)

Standard Lift Ram set for Fixed dipper - 14 FT machines

Standard Lift Ram set for ExtraDig dipper - 14 FT machines


14 x17.5 & 19.5Lx24, R4 Industrial- GALAXY- MANUAL TRANSMISSION WITH LSD

DRIVE CONTROLS (E)

Drive controls for 74HP Manual Transmission

TIRES ( E )

If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting a code from each

E (Essential) category below. Select Options and/or Attachments from Section 3 or 4. JCB cannot normally modify existing

factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.

If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from



EFFECTIVE:

JANUARY 1, 2013

SECTION 2 - ESSENTIAL FEATURES CONTINUED.

U.S.

LIST

200E200 $0

200E250 $0

200E308 $2,468

200E309 $2,468

200E205 $6,202

200E219 $8,085

200F072 Operator Manual Pack - American English $0



200G450 $0

88" GP Bucket - fixed dipper only

92" 6 IN 1 Bucket

92" 6 IN 1 Bucket with Forks

88" GP Bucket - ExtraDig dippers or hammer pipework

NORTH AMERICAN LEGISLATION (E)

North American Legislation

MANUAL PACK (E)

LOADER BUCKETS (E)

Direct Mount

No Front Loader Bucket - for fixed dipper

No Front Loader Bucket - for ExtraDig dipper

3CX 14FT

BACKHOE LOADER

U.S. DOLLAR

PRICE PAGESF.O.B. SAVANNAH, GA

If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one

code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.




EFFECTIVE:

JANUARY 1, 2013


U.S.

LIST

ITEM

BACKHOE DIPPERSTICK TO CHANGE STANDARD FIXED DIPPER TO EXTENDING DIPPER

200H407 Extending Dipper for CM, Manual control 14FT machines $6,823

STABILIZER FEET

200Y418 Street Feet $150

200Y419 Flip Feet $465

COUNTERWEIGHTS

200Y428 220 Lbs. CWT (must be ordered with 2WS extending dipper or hammer) $310

200Y470 400 Lbs. CWT $542

200Y472 750 Lbs. CWT w/ Cast Insert $953

ENGINE COMPARTMENT

200Y115 Coolant Heater - Eberspacher Diesel Fueled $2,500

200X256 Engine block heater $120

OPERATOR'S AREA

200Y289 3" Seat belt $90

AIRCONDITIONING

200Z530 Air Conditioning for 74HP $0

LOADER AUXILIARY HYDRAULICS

200R270 3/8 Loader Arm Pipework for Manual controls $1,085

SMOOTH RIDE

200Y465 JCB Smooth Ride - Loader Suspension $2,082

HYDRAULIC OPTIONS

HAMMER PIPEWORK FOR 14FT MACHINES

200H432 Hammer Pipework for Manual machines with fixed dipper - 14FT $3,039

200H433 Hammer Pipework AND extending dipper for Manual Control - 14FT (do not need to order H108) $9,862

HAMMER & BI-DIRECTIONAL CIRCUITS FOR 14FT MACHINES

200L109 Hammer & Bi-Directional Circuit for Manual Controls 14' fixed dipper $5,423

200L110 Hammer & Bi-Directional Circuit for Manual Controls 14' extending dipper $5,423

HAND HELD TOOL CIRCUIT

200V227 Hydraulic Hand Held Tool Circuit for Easycontrol $2,039

3CX 14FT

BACKHOE LOADER

U.S. DOLLAR


Select Optional Equipment as desired within limitations if indicated. Select Optional Equipment as desired within limitations if indicated.


EFFECTIVE:

JANUARY 1, 2013


U.S.

LIST

ITEM

MISCELLANEOUS ITEMS

200Y109 Stabilizer Cylinder Guards $603

200Y113 Canopy Roof (must be selected with any canopy 'A' code) $0

200Y240 Mirrors (L & R) - Exterior Rear View $222

200Y216 Front Fenders $460

200X266 Driving Lights - Mid level (mounted to cab) $273

200Y130 #N/A #N/A

200Y285 Lifting Point on backhoe bucket link $140

BOLT ON CUTTING EDGE

200P208 Bolt-on Cutting Edge for Loader Bucket - 92" $400


MECHANICAL COUPLER - Fits JCB Buckets Only

200K260 Backhoe Quick Hitch - Mechanical with Lift Point & Shackle $2,189

200K560 Pivot Pins Kit (use with quickhitch and std excavator bucket) $155


200K311 Backhoe Bucket - 12" heavy duty, 2.8 cu. Ft. $1,123


200K314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth $1,326




NOTE Up to 4 backhoe buckets may be ordered and shipped with each machine. Combined width of extra buckets, up to

3, must not exceed 72 inches. Additional buckets and attachments are located in the Dealer Fit Section of the

Backhoe Loader Price List

3CX 14FT BACKHOE LOADERU.S. DOLLAR




JCB BACKHOE LOADER

3CX-14 SUPERCENTERMOUNT


MACHINE PRICE LIST

in U.S. Dollars




U.S. DOLLAR PRICE

PAGESF.O.B. SAVANNAH, GA EFFECTIVE: MAY 1, 2013

STANDARD EQUIPMENT






ENGINE 91 HP gross, turbocharged, water-cooled,4 cyl, direct injection diesel, T4i compliant engine.

Hand and foot throttle. Full flow pressure engine oil lubrication with spin-on filter cartridge.




hood pre-cleaner.



Electrically operated transmission. disconnect on gear shift and loader levers. Powershift gear selection

with 4 forward & 4 reverse speeds.

FRONT AXLE 4WD - Industrial duty JCB Max-Trac torque proportioning, outboard planetary reduction axle, 4WD



double reduction, outboard planetary gear final reduction. Limited slip differential to provide auto-

matic equalization of wheel spin under conditions of unequal footing.



Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2 wheel drive activated by

switch.


turning circle 26' 5".



SAE maximum dig depth: Std dipper - 14' 7", Extradig dipper - 14' 7" - 18' 6". Two lever, JCB

manual backhoe controls. Fabricated stabilizer legs with anti-drift valves.



Bucket return-to-dig and third spool loader valve standard. Dump reach at full height - 32".

3CX-14 SUPER BACKHOE LOADER

All prices and specifications subject to change without notice page 2 of 12 3CX-14 USD Price Pages

U.S. DOLLAR PRICE

PAGES

F.O.B. SAVANNAH,

GAEFFECTIVE: MAY 1, 2013










oil pressure, transmission oil temp., air cleaner restriction, water in fuel indicator, and park brake




Battery Isolator as standard.

OPERATORS Suspension seat with adjustments for weight, seat angle, and back angle. Armrests and

ENVIRONMENT retractable seat belt standard. Two door entry with deluxe trim. Composite sure grip molded floor,

tilt steering column, front windshield with 2 speed plus intermittent wiper and washer,





HYDRAULIC SYSTEM Open center system, variable displacement pison pump, engine driven, 44 gpm @ 3650 psi.

Separate oil reservoir not shared with other systems, externally mounted to mainframe for ground

level servicing. Abrasion protection of valve to boom hoses. Hoses have burst pressure of 4 times



AND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,

fuel, and engine coolant. Tilt engine hood and lockable front grill. 15 second



















U.S. DOLLAR PRICE


EFFECTIVE: MAY 1,

2013


PACKAGE BUILD CODE: 0597B 0608B 0710B

Environment: CAB - AC CAB - AC CAB - AC

Controls: MANUAL EASY ADV. EASY

Drive 4WD 4WD 4WD

SALES Horse Power: 91HP 91HP 91HP

CODE ITEM Dipper: ExtraDig ExtraDig ExtraDig

0797 3CX-14 SUPER, 4WD, CM, 91HP, P/SHIFT, MANUAL CONTROLS

0808 3CX-14 SUPER, 4WD, CM, 91HP, P/SHIFT, EASYCONTROL

0831 3CX-14 SUPER, 4WD, CM, 91HP, P/SHIFT, ADVANCED EASYCONTROL

200A037 CAB with Air Conditioning (MANUAL CONTROLS)

200A077 CAB with Air Conditioning (EASYCONTROL)

200A190 CAB with Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)

200B61M

200C833 USA ONLY - for Manual Controls - Cab

200C750 USA ONLY - for Easycontrol -Cab

200C786 USA ONLY for Advanced Easycontrol


200E243 92" GP Bucket - for ExtraDig dipper or Hammer Pipework


200F832 Operator Manual Pack - American English - for Advanced Easycontrol

200V331


200H408 ExtraDig Dipper for Manual controls

200H508 ExtraDig Dipper for Easycontrol

200H308 ExtraDig Dipper for Advanced Easycontrol

200V099 Heavy Lift Ram set for ExtraDig dipper - 14 FT machines

200R621 5/8 Loader Arm Pipework for Manual controls

200R723 5/8 Loader Arm Pipework for Easycontrol

200R240 5/8 Loader Arm Pipework for Advanced Easycontrol

200W64P Drive controls for Powershift

200Y428 220 Lbs. CWT (must be ordered with 2WS extending dipper or hammer)

200P208 Bolt-on Cutting Edge for Loader Bucket - 92"

200Z541 Air Conditioning for 91HP

200Z551 Air Conditioning for 91HP & Advanced Easycontrol

200Y419 Flip Feet

SUGGESTED LIST PRICE $111,650 $115,248 $117,795

3CX-14 SUPER

BACKHOE LOADER

14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD for

91HP

Adjustment Kit - Advanced Easycontrol - for Hammer, Hammer

Bi/Directional & Loader arm pipework







SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)

0797 4WD MANUAL FIXED 100 lbs $76,600

0799 4WD MANUAL FIXED 100lbs $80,360

0808 4WD EASY FIXED 100 lbs $80,198

0809 4WD EASY FIXED 100 lbs $83,958

0831 4WD ADV. EASY FIXED 100 lbs $81,698

0832 4WD ADV. EASY FIXED 100 lbs $85,458

Manual Controls

200A016 CANOPY (MANUAL CONTROLS) NO $3,966

200A036 CAB (MANUAL CONTROLS) HEATER $11,071

200A037 CAB with Air Conditioning (MANUAL CONTROLS) HEATER & AC $15,806

Easycontrol

200A065 CANOPY (EASYCONTROL) NO $3,966

200A075 CAB (EASY CONTROL) HEATER $11,071

200A077 CAB with Air Conditioning (EASYCONTROL) HEATER & AC $15,806

200A093 CAB with Air Ride Seat (EASYCONTROL) HEATER $12,118

200A095 CAB with Air Conditioning & Air Ride Seat (EASYCONTROL) HEATER & AC $16,853

200A189 CAB with Air Ride Seat (ADVANCED EASYCONTROL) HEATER $12,118

200A190 CAB with Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL) HEATER & AC $16,853

U.S. DOLLAR PRICE PAGES

3CX-14 SUPER, 4WD, CM, 109HP, P/SHIFT,

MANUAL CONTROLS

DRIVE


MANUAL CONTROLS

3CX-14 SUPER

BACKHOE LOADER

UPGRADE - To change from fixed dipper to extending dipper , please see H codes below in Section 3- options


EASYCONTROL


Advanced Easycontrol

NOTE: Prices include AC/Heater and Seat options shown. For AC be sure to also order the appropriate Z code.


COUNTER

WEIGHTCONTROLS

HEATER / AC


ADVANCED EASYCONTROL




EASYCONTROL

DIPPER TYPE

If a Package Build machine from Section 1 will not meet your requirements, please order a machine by

selecting a code from each E (Essential) category below. Select Options and/or Attachments from Section 3

or 4. JCB cannot normally modify existing factory inventory. Dealers should order and install items from

the Dealer Fit Section to change existing machines.


SECTION 2 (CONTINUED) - ESSENTIAL FEATURES:

200C831 $0

200C833 $0

200C834 $325

200C835 $1,000

200C836 $1,325

Easycontrol

200C748 $0

200C750 $0

200C751 $325

200C752 $1,000

200C753 $1,325

200C786 $0

200C787 $325

200C788 $1,000

200C789 $1,325

200B61M $6,380

200B61P $6,875

200B61T $7,875

200B61V $6,875

200B61Z $7,875

200B63M $9,074

200B63P $9,569

200B63T $10,569

200B63V $9,569

200B63Z $10,569

MICHELIN TIRES

200B26M $7,485

200B26P $7,980

200B26T $8,980

200B26V $7,980

200B26Z $8,980

EFFECTIVE: MAY 1, 2013U.S. DOLLAR PRICE PAGES

USA ONLY - for Manual Controls - Canopy

COFFEE MACHINE - for Manual Controls

3CX-14 SUPER

BACKHOE LOADER

Manual Control

HEATED WINDSHIELD - for Advanced Easycontrol


COFFEE MACHINE AND HEATED WINDSHIELD - for Manual Controls

COFFEE MACHINE AND HEATED WINDSHIELD - for Easycontrol

USA ONLY - for Manual Controls - Cab

USA ONLY - for Easycontrol -Canopy

COFFEE MACHINE - for Easycontrol

HEATED WINDSHIELD - for Easycontrol

USA ONLY - for Easycontrol -Cab

HEATED WINDSHIELD - for Manual Controls

340 x 18 & 440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD for 91HP

14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP

TIRES ( E )


COFFEE MACHINE for Advanced Easycontrol

USA ONLY for Advanced Easycontrol

14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP

12.5 x 18 & 21L x 24 Industrial- GALAXY - POWERSHIFT & LSD for 91HP

12.5 x 18 & 21L x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 91HP

12.5 x 18 & 21L x 24 Industrial- GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 91HP

12.5 x 18 & 21L x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP

12.5 x 18 & 21L x 24 Industrial- GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP

COFFEE MACHINE AND HEATED WINDSHIELD - for Advanced Easycontrol

340 x 18 & 440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD & TORQUELOCK for 91HP

340 x 18 & 440 X 28 XMCL Radial - MICHELIN - AUTOSHIFT & LSD & TORQUELOCK for 91HP

340 x 18 & 440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD & TORQUELOCK for 109HP

340 x 18 & 440 X 28 XMCL Radial - MICHELIN - AUTOSHIFT & LSD & TORQUELOCK for 109HP

GALAXY TIRES - 21L x 24

GALAXY TIRES - 19.5 x 24

14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD for 91HP

14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD & TORQUELOCK for 91HP

14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 91HP

If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each




U.S.

LIST

200W64P Drive controls for Powershift $0

200W64F $0

200W64S $0

200V098 $0

200V099 Heavy Lift Ram set for ExtraDig dipper - 14 FT machines $0

EXCAVATOR BUCKETS (E) - PICK ONE - for additional buckets, please see K codes in Section 4

200D200 $0

200D311 $1,123

200D312 $1,289

200D314 $1,326

200D315 $1,492

200D316 $1,812

200D317 $2,132

200E200 $0

200E250 $0

200E202 $2,468

200E232 $3,024

200E243 $2,468

200E244 $3,024

200E205 $6,202

200E219 $8,085

200E233 $7,068

200E234 $8,731

200E321 $3,041

200E322 $5,569

200E323 $6,146

200E324 $8,908Toolcarrier and 92" 6 IN 1 Bucket

Toolcarrier and 96" GP Bucket

F.O.B. SAVANNAH, GA

Toolcarrier

Heavy Lift Ram set for Fixed dipper - 14 FT machines

92" GP Bucket - for ExtraDig dipper or Hammer Pipework


Toolcarrier (Q-Fit) no Bucket



92" 6 IN 1 Bucket

92" GP Bucket - for fixed dipper


LOADER BUCKETS (E)


U.S. DOLLAR

PRICE PAGES

3CX-14 SUPER

BACKHOE LOADER






96" 6 IN 1 Bucket


Direct Mount


DRIVE CONTROLS (E)

Drive controls for Powershift & Torquelock

Drive controls for Autoshift & Torquelock


No Excavator Bucket




U.S.

LIST

200F072 $0

200F073 $0

200F075 $0


200F832 $0

200F833 $0

200F835 $0

Adjustment Kits - Advanced Easy Control ONLY

200V330 $0

200V331 Adjustment Kit - Advanced Easycontrol - for Hammer, Hammer Bi/Directional & Loader arm pipework $0

200G450 $0

U.S. DOLLAR

PRICE PAGES

EFFECTIVE: MAY 1,

2013

3CX-14 SUPER

BACKHOE LOADERF.O.B. SAVANNAH, GA


MANUAL PACK (E)

Operator Manual Pack - French

Operator Manual Pack - American English


Adjustment Kit - Advanced Easycontrol - No additional hydrauic circuits

Operator Manual Pack - Spanish

Operator Manual Pack - American English - for Advanced Easycontrol

Operator Manual Pack - French - for Advanced Easycontrol

Operator Manual Pack - Spanish - for Advanced Easycontrol




U.S.

LIST

ITEM


200H408 ExtraDig Dipper for Manual controls $6,823

200H508 ExtraDig Dipper for Easycontrol $6,823

200H308 ExtraDig Dipper for Advanced Easycontrol $6,823

STABILIZER FEET



COUNTERWEIGHTS


200Y470 400 Lbs. CWT $542


ENGINE COMPARTMENT



OPERATOR'S AREA

200Y701 Air Suspension Seat, Cloth, Armrests, Heated for Manual controls $1,047

200Y289 3" Seat belt $90

AIRCONDITIONING



200Z551 Air Conditioning for 91HP & Advanced Easycontrol $0



Manual Control

200R621 5/8 Loader Arm Pipework for Manual controls $1,073

200R623 5/8 Loader Arm Pipework with Detent for Manual controls $1,073

200R625 5/8 Loader Arm Pipework with Lever Locks for Manual controls & Coffee Machine $1,073

Easycontrol

200R723 5/8 Loader Arm Pipework for Easycontrol $1,073

200R724 5/8 Loader Arm Pipework for Easycontrol & Bi-Directional Circuit $1,073

200R726 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Coffee Machine $1,073

200R728 5/8 Loader Arm Pipework with Lever Locks for Easycontrol & Bi-Directional Circuit & Coffee Machine $1,073


200R240 5/8 Loader Arm Pipework for Advanced Easycontrol $1,073

F.O.B. SAVANNAH, GA 3CX-14 SUPER

BACKHOE LOADER

U.S. DOLLAR

PRICE PAGES





U.S.

ITEM LIST

SMOOTH RIDE

Manual & Easycontrol Control


200Y496 JCB Smooth Ride - Loader Suspension with Hammer Bi/directional circuit $2,082


200Y810 JCB Smooth Ride - Loader Suspension for Advanced Easycontrol $2,082

HEAVY LIFT LOADER

200V400 Heavy-Lift Loader Cylinders $645

HAMMER PIPEWORK

Manual Control

200H435 Hammer Pipework for Manual controls - fixed dipper $3,039

200H436 Hammer Pipework AND ExtraDig Dipper for Manual controls $9,862

Easycontrol

200H535 Hammer Pipework for Easycontrol - fixed dipper $3,039

200H536 Hammer Pipework AND ExtraDig Dipper for Easycontrol $9,862


200L401 Hammer Pipework for Advanced Easycontrol - fixed dipper $3,039

200L403 Hammer Pipework for Advanced Easycontrol - ExtraDig dipper $3,039

HAMMER & BI-DIRECTIONAL CIRCUITS

Manual Control

200L340 Hammer & Bi-Directional Circuit for Manual Control 14' fixed dipper $5,423

200L341 Hammer & Bi-Directional Circuit for Manual Contol 14' ExtraDig dipper $5,423

Easycontrol

200L301 Hammer & Bi-Directional Circuit for EasyControl 14' fixed dipper $5,423

200L302 Hammer & Bi-Directional Circuit for EasyContol 14' ExtraDig dipper $5,423


200L406 Hammer & Bi-Directional Circuit for Advanced EasyControl 14' fixed dipper $5,423

200L408 Hammer & Bi-Directional Circuit for Advanced EasyContol 14' ExtraDig dipper $5,423

F.O.B. SAVANNAH, GA3CX-14 SUPER

BACKHOE LOADER

U.S. DOLLAR

PRICE PAGES




U.S.

ITEM LIST


Manual Control

200V546 Hydraulic Hand Held Tool Circuit for Manual Control with Fixed dipper $2,039

200V547 Hydraulic Hand Held Tool Circuit for Manual Control with ExtraDig dipper $2,039

Easycontrol

200V402 Hydraulic Hand Held Tool Circuit for EasyControl with Fixed dipper $2,039

200V512 Hydraulic Hand Held Tool Circuit for EasyControl with ExtraDig dipper $2,039


200V229 Hydraulic Hand Held Tool Circuit for Advanced Easycontrol $2,039

200V543 Hydraulic Hand Held Tool Circuit for Advanced Easycontrol with Hammer Bi/Directional circuit $2,039

AUXILIARY ELECTRICS

Manual Control

200X374 Auxiliary Electrics - Manual Control with Loader Toolcarrier $0

200X372 Auxiliary Electrics - Manual Control with Hammer Circuit $0

200X373 Auxiliary Electrics - Manual Control with Hammer/ Bi-directional Circuit & Cab $0

200X376 Auxiliary Electrics - Manual Control with Hammer/ Bi-directional Circuit & Canopy $0

200X371 Auxiliary Electrics - Manual Control with Hand Held Tool Circuit $0

Easycontrol

200X365 Auxiliary Electrics - Easycontrol with Loader Toolcarrier $0

200X361 Auxiliary Electrics - Easycontrol with Hammer Circuit $0

200X362 Auxiliary Electrics - Easycontrol with Hammer / Bi-directional Circuit $0


200X351 Auxiliary Electrics - Advanced Easycontrol $0

200X356 Auxiliary Electrics - Advanced Easycontrol with Hammer / Bi-directional Circuit $0

200X354 Auxiliary Electrics - Advanced Easycontrol with Loader Toolcarrier $0

200X355 Auxiliary Electrics - Advanced Easycontrol with Hammer Circuit $0

3CX-14 SUPER


U.S. DOLLAR PRICE

PAGESEFFECTIVE: MAY 1, 2013





U.S.

ITEM LIST

MISCELLANEOUS ITEMS






200Y131 Front Grill Bumpers $190





Q- FIT FORKS

200P212 Pallet Forks and Frame (ITA ) 48" forks - must be ordered with a toolcarrier code $2,521

MECHANICAL EXCAVATOR QUICK COUPLER - Fits JCB Buckets Only



HYDRAULIC EXCAVATOR QUICK COUPLER - Fits JCB Buckets Only

Manual Control - EXTRDIG ONLY

200G15H Hydraulic Excavator Quickhitch with lifting shackle - Manual controls (order G511) $4,650

Easycontrol - EXTRADIG ONLY

200G25H Hydraulic Excavator Quickhitch with lifting shackle - Easycontrol (order G511) $4,650

200G26H Hydraulic Excavator Quickhitch with lifting shackle - Easycontrol with Hammer Circuit (order G511) $4,650

200G27H Hydraulic Excavator Quickhitch with lifting shackle - Easycontrol with Hammer/Bi-Di circuit (order G511) $4,650

Advanced Easycontrol - EXTRADIG ONLY

200G35K Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol (order G511) $4,650

200G35M Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol with AC (order G511) $4,650

200G36K $4,650

200G36M $4,650

ALL

200G511 No Lifting Adjustments - MUST order with Hydraulic Quick Coupler $0








NOTEUp to 4 backhoe buckets may be ordered and shipped with each machine. Combined width of extra buckets, up to 3, must not exceed 72 inches.

Additional buckets and attachments are located in the Dealer Fit Section of the Backhoe Loader Price List

3CX-14 SUPER

BACKHOE LOADER

U.S. DOLLAR


Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol with Hammer/Bi-Di circuit (order G511)

Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol with Hammer/Bi-Di circuit & AC (order

G511)



JCB BACKHOE LOADER

3CX-15 SUPERCENTERMOUNT


MACHINE PRICE LIST

in U.S. Dollars




U.S. DOLLAR PRICE

PAGES

EFFECTIVE: MAY 1,

2013

STANDARD EQUIPMENT






ENGINE 109HP gross, turbocharged, water-cooled,4 cyl, direct injection diesel, T4i compliant engine.





hood pre-cleaner.



Electrically operated transmission. disconnect on gear shift and loader levers. Powershift gear selection

with 4 Fwd / 4 Rev speeds.








Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2 wheel drive activated

by switch.


turning circle - 26' 5".



SAE maximum dig depth: Extradig dipper - 16' 3" - 20' 1". Easycontrol backhoe controls.

Fabricated stabilizer legs with anti-drift valves.




3CX-15 SUPER BACKHOE LOADER F.O.B. SAVANNAH, GA

All prices and specifications subject to change without notice Page 2 of 10 3CX-15 USD Price Pages

U.S. DOLLAR PRICE

PAGES

EFFECTIVE: MAY 1,

2013














Battery Isolator fitted as standard.

































U.S. DOLLAR

PRICE PAGES

EFFECTIVE: MAY 1,

2013


PACKAGE BUILD CODE: 0602A 0610A

Environment: CAB - AC CAB - AC

Controls: EASY ADV. EASY

Drive: 4WD 4WD

SALES Horse Power: 109HP 109HP

CODE ITEM Dipper: ExtraDig ExtraDig





200B61V







200V331


200V107 Heavy Lift Ram set for Extending dipper - 15 FT machines



200W64F Drive controls for Powershift & Torquelock




200Y419 Flip Feet



14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD & TORQUELOCK for

109HP

Adjustment Kit - Advanced Easycontrol - for Hammer, Hammer Bi/Directional & Loader arm

pipework

Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine

using the Custom Build, Options & Attachments Sections following.

Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine

using the Custom Build, Options & Attachments Sections following.


F.O.B. SAVANNAH, GAEFFECTIVE: MAY 1,

2013


SALES DRIVE CONTROLSHORSE

POWERDIPPER TYPE

COUNTER

WEIGHTU.S.

CODE ITEM LIST

BASE MACHINE (E)

0810

4WD EASY 109HP EXTRADIG 400 lbs $98,008

0835

4WD ADV. EASY 109HP EXTRADIG 400 lbs $99,508


HEATER / AC

200A065 NO $3,966

200A075 HEATER $11,071








Easycontrol

200C748 USA ONLY - for Easycontrol -Canopy $0

200C750 USA ONLY - for Easycontrol -Cab $0

200C751 COFFEE MACHINE - for Easycontrol $325

200C752 HEATED WINDSHIELD - for Easycontrol $1,000

200C753 COFFEE MACHINE AND HEATED WINDSHIELD - for Easycontrol $1,325


200C786 USA ONLY for Advanced Easycontrol $0

200C787 COFFEE MACHINE for Advanced Easycontrol $325

200C788 HEATED WINDSHIELD - for Advanced Easycontrol $1,000

200C789 COFFEE MACHINE AND HEATED WINDSHIELD - for Advanced Easycontrol $1,325

3CX-15 SUPER, 4WD, CM, 109HP,

P/SHIFT, EASYCONTROL


P/SHIFT, ADVANCED EASYCONTROL

3CX-15 SUPER

BACKHOE LOADERU.S. DOLLAR PRICE PAGES

CANOPY (EASYCONTROL)

CAB (EASY CONTROL)


Easycontrol

If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.

JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.

If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements,




200B61V 14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP $6,875

200B61Z 14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP $7,875


200B63V 12.5 x 18 & 21L x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP $9,569

200B63Z 12.5 x 18 & 21L x 24 Industrial- GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP $10,569

MICHELIN TIRES

200B26V 340 x 18 & 440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD & TORQUELOCK for 109HP $7,980

200B26Z 340 x 18 & 440 X 28 XMCL Radial - MICHELIN - AUTOSHIFT & LSD & TORQUELOCK for 109HP $8,980

200W64F Drive controls for Powershift & Torquelock $0

200W64S Drive controls for Autoshift & Torquelock $0

200V107 $0

200D200 $0

200D311 $1,123

200D312 $1,289

200D314 $1,326

200D315 $1,492

200D316 $1,812

200D317 $2,132

Heavy Lift Ram set for Extending dipper - 15 FT machines

DRIVE CONTROLS (E)



TIRES (E)

3CX-15 SUPER BACKHOE LOADER EFFECTIVE: MAY 1, 2013F.O.B. SAVANNAH, GA


EXCAVATOR BUCKETS (E)- PICK ONE, for any additional buckets, please see K codes in Attachments section




No Excavator Bucket




EFFECTIVE: MAY 1,

2013

SECTION 2 - ESSENTIAL FEATURES CONT.

200E250 No Front Loader Bucket - for ExtraDig dipper $0

200E243 92" GP Bucket - for ExtraDig dipper or Hammer Pipework $2,468


200E205 92" 6 IN 1 Bucket $6,202

200E219 92" 6 IN 1 Bucket with Forks $8,085

200E233 96" 6 IN 1 Bucket $7,068


Toolcarrier

200E321 Toolcarrier (Q-Fit) no Bucket $3,041

200E322 Toolcarrier and 92" GP Bucket $5,569


200E324 Toolcarrier and 92" 6 IN 1 Bucket $8,908

Easycontrol





200F832 Operator Manual Pack - American English - for Advanced Easycontrol $0

200F833 Operator Manual Pack - French - for Advanced Easycontrol $0

200F835 Operator Manual Pack - Spanish - for Advanced Easycontrol $0

ADJUSTMENT KITS - Advanced Easyconrol ONLY

200V330 Adjustment Kit - Advanced Easycontrol - No additional hydrauic circuits $0


200G450 $0

LOADER BUCKETS (E)

3CX-15 SUPER

BACKHOE LOADER

U.S. DOLLAR



Direct Mount


MANUAL PACK (E)


EFFECTIVE: MAY 1,

2013


U.S.

ITEM LIST


Easycontrol







SMOOTH RIDE




HAMMER PIPEWORK

200H540 Hammer Pipework for Easycontrol - 15' ExtraDig dipper $3,039

200L404 Hammer Pipeworkt for Advanced EasyContol 15' ExtraDig dipper $3,039

HAMMER & BI-DIRECTIONAL PIPEWORK


200L308 Hammer & Bi-Directional Circuit for EasyContol 15' ExtraDig dipper & Coffee Machine $5,423



200V548 Hydraulic Hand Held Tool Circuit for EasyControl - 15' ExtraDig dipper $2,039











AUXILIARY ELECTRICS

Easycontrol









F.O.B. SAVANNAH, GA3CX-15 SUPER

BACKHOE LOADER

U.S. DOLLAR

PRICE PAGES



EFFECTIVE: MAY 1,

2013


U.S.

ITEM LIST

STABILIZER FEET



COUNTERWEIGHTS


ENGINE COMPARTMENT



OPERATOR'S AREA

200Y289 3" Seat belt $90

AIR CONDITIONING



3CX-15 SUPER

BACKHOE LOADER

U.S. DOLLAR




EFFECTIVE: MAY 1,

2013


U.S.

ITEM LIST




Q- FIT FORKS


MECHANICAL EXCAVATOR QUICK COUPLER - Fits JCB Buckets Only



HYDRAULIC EXCAVATOR QUICK COUPLER - Fits JCB Buckets Only

Easycontrol

200G25H Hydraulic Excavator Quickhitch with lifting shackle - Easycontrol (order G511) $4,650

200G26H Hydraulic Excavator Quickhitch with lifting shackle - Easycontrol with Hammer Circuit (order G511) $4,650

200G27H Hydraulic Excavator Quickhitch with lifting shackle - Easycontrol with Hammer/Bi-Di circuit (order G511) $4,650


200G35K Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol (order G511) $4,650

200G35M Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol with AC (order G511) $4,650

200G36K $4,650

200G36M $4,650

Easycontrol & Advanced Easycontrol

200G511 No Lifting Adjustments - MUST order with Hydraulic Quick Coupler $0









Up to 4 backhoe buckets may be ordered and shipped with each machine. Combined width of extra buckets, up to 3, must not

exceed 72 inches. Additional buckets and attachments are located in the Dealer Fit Section of the Backhoe Loader Price List

3CX-15 SUPER

BACKHOE LOADER

U.S. DOLLAR


Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol with Hammer/Bi-Di circuit (order

G511)

Hydraulic Excavator Quickhitch with lifting shackle - Advanced Easycontrol with Hammer/Bi-Di circuit & AC

(order G511)



JCB BACKHOE LOADER

3CX-17 SUPER CENTERMOUNT


MACHINE PRICE LIST

in U.S. Dollars




U.S. DOLLAR PRICE

PAGES

EFFECTIVE: MAY 1,

2013

STANDARD EQUIPMENT











hood pre-cleaner.



Electrically operated transmission. disconnect on gear shift and loader levers. Powershift gear

selection with 4 Fwd / 4 Rev speeds.








Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2 wheel drive

activatedby switch.


turning circle 4WD - 26' 5".



SAE maximum dig depth: Extradig dipper - 17' 7" - 21' 6". Easycontrol backhoe controls.

Fabricated stabilizer legs with anti-drift valves.





All prices and specifications subject to change without notice Page 2 of 9 3CX-17 USD Prices Pages

U.S. DOLLAR PRICE

PAGESF.O.B. SAVANNAH, GA EFFECTIVE: MAY 1, 2013


























SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshieldAND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,




















U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GA


PACKAGE BUILD CODE: 0611A 0611B

Environment: CAB - AC CAB - AC


Drive: 4WD 4WD


CODE ITEM Dipper: ExtraDig ExtraDig





200B61V 14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP

200C748 USA ONLY - for Easycontrol -Canopy






200V331 Adjustment Kit - Advanced Easycontrol - for Hammer, Hammer Bi/Directional & Loader arm pipework


200R744 5/8 Loader Arm Pipework for Easycontrol & Bi-Directional Circuit



200Y419 Flip Feet





EFFECTIVE: MAY 1, 20133CX 17FT BACKHOE LOADER




F.O.B. SAVANNAH, GAEFFECTIVE: MAY 1,

2013



POWERDIPPER TYPE

COUNTER

WEIGHTU.S.

CODE ITEM LIST

BASE MACHINE (E)

0811

4WD EASY 109HP EXTRADIG 750 lbs $134,380

0836

4WD ADV. EASY 109HP EXTRADIG 750 lbs $135,880


HEATER / AC

200A065 CANOPY (EASYCONTROL) NO $3,966

200A075 CAB (EASY CONTROL) HEATER $11,071








Easycontrol

200C748 USA ONLY - for Easycontrol -Canopy $0

200C750 USA ONLY - for Easycontrol -Cab $0

200C751 COFFEE MACHINE - for Easycontrol $325

200C752 HEATED WINDSHIELD - for Easycontrol $1,000

200C753 COFFEE MACHINE AND HEATED WINDSHIELD - for Easycontrol $1,325


200C786 USA ONLY for Advanced Easycontrol $0

200C787 COFFEE MACHINE for Advanced Easycontrol $325

200C788 HEATED WINDSHIELD - for Advanced Easycontrol $1,000

200C789 COFFEE MACHINE AND HEATED WINDSHIELD - for Advanced Easycontrol $1,325



3CX-17 SUPER

BACKHOE U.S. DOLLAR PRICE PAGES




Easycontrol

If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from

each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.

JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to

change existing machines.

If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your If a Package Build machine from Section 1 will not meet your







200B61V 14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP $6,875

200B61Z 14 x 17.5 & 19.5L x 24, R4 Industrial - GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP $7,875


200B63V 12.5 x 18 & 21L x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP $9,569

200B63Z 12.5 x 18 & 21L x 24 Industrial- GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP $10,569

MICHELIN TIRES

200B26V 340 x 18 & 440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD & TORQUELOCK for 109HP $7,980

200B26Z 340 x 18 & 440 X 28 XMCL Radial - MICHELIN - AUTOSHIFT & LSD & TORQUELOCK for 109HP $8,980

200W64F $0


200D200 No Excavator Bucket $0

200D311 $1,123

200D312 $1,289

200D314 $1,326

200D315 $1,492

200D316 $1,812

200D317 $2,132



EXCAVATOR BUCKETS (E)- PICK ONE, for any additional buckets, please see K codes in Attachments






F.O.B. SAVANNAH, GA

AXLES AND TRANSMISSIONS (E)

TIRES ( E )



3CX-17 SUPER BACKHOE

LOADER


EFFECTIVE: MAY 1,

2013


U.S.

LIST




200E205 92" 6 IN 1 Bucket $6,202


200E233 96" 6 IN 1 Bucket $7,068


Toolcarrier






MANUAL PACK (E)

Easycontrol








ADJUSTMENT KITS - Advanced Easyconrol ONLY

200V330 Adjustment Kit - Advanced Easycontrol - No additional hydrauic circuits $0



200G450 North American Legislation $0

F.O.B. SAVANNAH, GA

Direct Mount

LOADER BUCKETS (E)

3CX-17 SUPER

BACKHOE LOADER

U.S. DOLLAR

PRICE PAGES










3CX-17 SUPER

BACKHOE LOADER

EFFECTIVE: MAY 1,

2013

SECTION 3 - OPTIONS - NEW FACTORY BUILT ORDERS:U.S.

ITEM LIST

STABILIZER FEET



ENGINE COMPARTMENT



OPERATOR'S AREA

200Y289 3" Seat belt $90

AIR CONDITIONING




Easycontrol







SMOOTH RIDE




HYDRAULIC OPTIONS

HAMMER PIPEWORK NOT AVAILABLE ON 17FT MACHINES

BI- DIRECTIONAL CIRCUITS NOT AVAILABLE ON 17FT MACHINES


200V548 Hydraulic Hand Held Tool Circuit for EasyControl - 15' ExtraDig dipper $2,039











AUXILIARY ELECTRICS

Easycontrol









U.S. DOLLAR




EFFECTIVE: MAY 1,

2013


U.S.

ITEM LIST




Q- FIT FORKS














3CX 17FT SUPER BACKHOE

LOADER

U.S. DOLLAR




JCB BACKHOE LOADER

4CX-14 SUPER

CENTERMOUNT


MACHINE PRICE LIST

in U.S. Dollars




All prices and specifications subject to change without notice page 1 of 10 4CX-14FT USD Price Page

U.S. DOLLAR PRICE

PAGES

EFFECTIVE: MAY 1,

2013

STANDARD EQUIPMENT











hood pre-cleaner.



Electrically operated transmission. disconnect on gear shift and loader levers.

Powershift gear selection with 4 Fwd / 4 Rev speeds.

FRONT AXLE 4WS - Industrial duty 4WD Limited Slip Differential, outboard planetary reduction,

4WD shift-on-the-go.



matic equalization of wheel spin under conditions of unequal footing. Steering axle with 3

modes - 2WS, 4WS, and "crab" steer.



Transmission shifts to neutral when park brake is activated. 4 wheel braking in 2WD activated by switch.


turning circle 4WS - 30'2".



SAE maximum dig depth: Std dipper - 14' 7", Extradig dipper - 14' 7" - 18' 6". Two lever, JCB (SAE)

backhoe controls. Fabricated stabilizer legs with anti-drift valves. Front fenders standard


cylinders. Parallel lift standard during loader raise and lower functions. Dump height: 8' 10"


Heavy Lift loader arms standard

4CX-14 SUPER



U.S. DOLLAR PRICE

PAGES

F.O.B.

SAVANNAH, GA

EFFECTIVE: MAY 1,

2013














Battery isolator fitted as standard.



















4CX-14 SUPER

BACKHOE LOADER








U.S. DOLLAR PRICE


EFFECTIVE: MAY 1,

2013



Environment: CAB CAB


Gearbox: Powershift Powershift

Dig Depth: 14FT 14FT


CODE ITEM 4wd-XDIG 4wd-XDIG




200A197 CAB With Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)

200B64Q 16.9 x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP








200H508 ExtraDig Dipper for Easycontrol

200H308 ExtraDig Dipper for Advanced Easycontrol

200V099 Heavy Lift Ram set for ExtraDig dipper - 14 FT machines




200Y428 220 Lbs. CWT (must be ordered with 2WS extending dipper or hammer)





4CX-14 SUPER

BACKHOE LOADER







SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)

0812 4WD EASY 109HP FIXED 100 lbs 95,972

0837 4WD ADV. EASY 109HP FIXED 100 lbs 97,472

200A070 $3,966

200A084 $11,071

200A086 $15,806

200A102 $12,118

200A104 $16,853

200A196 $12,118

200A197 $16,853




U.S. DOLLAR PRICE PAGES 4CX-14 SUPER


DIPPER TYPECOUNTER

WEIGHT


EASYCONTROL



CAB with Air Conditioning (EASYCONTROL)

CAB with Air Ride Seat (EASYCONTROL)

CAB With Air Conditioning & Air Ride Seat (EASYCONTROL)

CAB with Air Ride Seat (ADVANCED EASYCONTROL)

Easycontrol


CONTROLSHORSE

POWERDRIVE

CAB With Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)

NO

HEATER

HEATER & AC

HEATER

HEATER & AC

HEATER

HEATER & AC


CAB (EASYCONTROL)

If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting a code from each E

(Essential) category below. Select Options and/or Attachments from Section 3 or 4. JCB cannot normally modify existing factory

inventory. Dealers should order and install items from the Dealer Fit Section to change existing machines.



200C748 $0

200C750 $0

200C751 $325

200C754 $1,000

200C755 $1,325

200C786 $0

200C787 $325

200C790 $1,000

200C791 $1,325

DRIVE CONTROLS (E)

200W84F $0

200W84S $0

200V098 Heavy Lift Ram set for Fixed dipper - 14 FT machines $0

200V099 $0

200B64Q $5,907

200B64W $7,402

200B29Q $7,857

200B29W $9,352

200D200 $0

200D311 $1,123

200D312 $1,289

200D314 $1,326

200D315 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 5 teeth $1,492

200D316 Backhoe Bucket - 30" heavy duty, 9.2 cu. Ft. $1,812

200D317 $2,132



COFFEE MACHINE AND HEATED WINDSHIELD for Advanced Easycontrol

16.9 x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP

16.9 x 24 Industrial- GALAXY - AUTOSHIFT & LSD & TORQUELOCK for 109HP

440 X 28 XMCL Radial - MICHELIN - POWERSHIFT & LSD & TORQUELOCK for 109HP

TIRES ( E )





GALAXY TIRE SETS


MICHELIN TIRE SETS

No Excavator Bucket


440 X 28 XMCL Radial - MICHELIN - AUTOSHIFT & LSD & TORQUELOCK for 109HP

Easycontrols



F.O.B. SAVANNAH, GA EFFECTIVE: MAY 1, 2013 4CX-14 SUPER

BACKHOE LOADER




Heavy Lift Ram set for ExtraDig dipper - 14 FT machines






HEATED WINDSHIELD for Advanced Easycontrol







EFFECTIVE: MAY 1,

2013


U.S.

LIST

200E200 $0

200E202 $2,468

200E205 $6,202

200E232 $3,024

200E233 $7,068

200E234 $8,731

200E243 $2,468

200E244 $3,024

200E250 $0

200E321 $3,041

200E322 $5,569

200E323 $6,146

200E324 $8,908


Easycontrol

200F072 $0

200F073 $0

200F075 $0

200F832 $0

200F833 $0

200F835 $0

200G450 $0

F.O.B. SAVANNAH, GA

LOADER BUCKETS (E)

U.S. DOLLAR

PRICE PAGES

4CX-14 SUPER

BACKHOE LOADER





92" 6 IN 1 Bucket


Operator Manual Pack - American English


Operator Manual Pack - Spanish


96" 6 IN 1 Bucket




Toolcarrier and 92" 6 IN 1 Bucket

Toolcarrier (Q-Fit) no Bucket

Toolcarrier


Operator Manual Pack - French - for Advanced Easycontrol

Operator Manual Pack - French

MANUAL PACK (E)

Operator Manual Pack - Spanish - for Advanced Easycontrol



Direct Mount


EFFECTIVE: MAY 1,

2013

I'


U.S.

LIST

ITEM


Easycontrol

200H508 ExtraDig Dipper for Easycontrol $6,823


200H308 ExtraDig Dipper for Advanced Easycontrol $6,823

STABILIZER FEET



COUNTERWEIGHTS


200Y471 400 Lbs. CWT $542

200Y476 560 Lbs. CWT w/ Cast Insert (4WS builds only) $645

ENGINE COMPARTMENT



OPERATOR'S AREA

200Y289 3" Seat belt $90

AIR CONDITIONING




Easycontrol





200R239 $1,0735/8 Loader Arm Pipework for Advanced Easycontrol



BACKHOE LOADER

U.S. DOLLAR

PRICE PAGES



EFFECTIVE: MAY 1,

2013


U.S.

LIST

ITEM

SMOOTH RIDE

Easycontrol




HAMMER PIPEWORK

200H535 Hammer Pipework for Easycontrol - fixed dipper $3,039

200H536 Hammer Pipework AND ExtraDig Dipper for Easycontrol $9,862


Easycontrol

200L301 Hammer & Bi-Directional Circuit for EasyControl 14' fixed dipper $5,423




200L401 Hammer Pipework for Advanced Easycontrol - fixed dipper $3,039

200L403 Hammer Pipework for Advanced Easycontrol - ExtraDig dipper $3,039

200L406 Hammer & Bi-Directional Circuit for Advanced EasyControl 14' fixed dipper $5,423









BACKHOE LOADER

U.S. DOLLAR

PRICE PAGES



EFFECTIVE: MAY 1,

2013


U.S.

LIST

ITEM




Q- FIT FORKS












Up to 4 backhoe buckets may be ordered and shipped with each machine. Combined width of extra buckets, up to 3, must not exceed

72 inches. Additional buckets and attachments are located in the Dealer Fit Section of the Backhoe Loader Price List

4CX-14 SUPER

BACKHOE LOADER

U.S. DOLLAR




JCB BACKHOE LOADER

4CX-15 SUPER

CENTERMOUNT


MACHINE PRICE LIST

in U.S. Dollars




U.S. DOLLAR PRICE

PAGES

EFFECTIVE: MAY 1,

2013

STANDARD EQUIPMENT











hood pre-cleaner.





FRONT AXLE 4WS - Industrial duty 4WD Limited Slip Differential; outboard planetary reduction,

4WD shift-on-the-go.












SAE maximum dig depth: Extradig dipper - 16' 3" - 20' 1". Two lever, JCB (SAE)

backhoe controls. Fabricated stabilizer legs with anti-drift valves. Front fenders standard




Heavy Lift Loader arms standard

4CX-15 SUPER



U.S. DOLLAR PRICE

PAGES

EFFECTIVE: MAY 1,

2013

































4CX-15 SUPER















U.S. DOLLAR

PRICE PAGES

EFFECTIVE: MAY 1,

2013



Environment: CAB CAB


Gearbox: Powershift Powershift

Dig Depth: 15FT 15FT


CODE ITEM 4wd-XDIG 4wd-XDIG




200A197 CAB With Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)

200B64Q 16.9 x 24 Industrial- GALAXY - POWERSHIFT & LSD & TORQUELOCK for 109HP








200V107 Heavy Lift Ram set for Extending dipper - 15 FT machines









LOADERF.O.B. SAVANNAH, GA




F.O.B. SAVANNAH,

GA

EFFECTIVE: MAY 1,

2013



POWERDIPPER TYPE

COUNTER

WEIGHTU.S.

CODE ITEM LIST

BASE MACHINE (E)

0813 4WD EASY 109HP EXTRADIG 750 lbs $113,149

0838 4WD ADV. EASY 109HP EXTRADIG 750 lbs $114,649


200A070 $3,966

200A084 $11,071

200A086 $15,806

200A102 $12,118

200A104 $16,853


200A196 $12,118

200A197 $16,853CAB With Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)

HEATER & AC

HEATER

HEATER & AC


4CX-15 SUPER


Easycontrol


CAB (EASYCONTROL) HEATER







NO

HEATER & AC

HEATER






If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements, If a Package Build machine from Section 1 will not meet your requirements,



Easycontrol

200C748 $0

200C750 $0

200C751 $325

200C754 $1,000

200C755 $1,325

200C786 $0

200C787 $325

200C790 $1,000

200C791 $1,325

DRIVE CONTROLS (E)

200W84F $0

200W84S $0

200V107 $0

200B64Q $5,907

200B64W $7,402

200B29Q $7,857

200B29W $9,352


200D200 $0



200D314 Backhoe Bucket - 24" heavy duty, 7.1 cu. Ft.- 4 teeth $1,326

200D315 $1,492

200D316 $1,812

200D317 $2,132


No Excavator Bucket

Heavy Lift Ram set for Extending dipper - 15 FT machines

MICHELIN TIRE SET

TIRES ( E )

GALAXY TIRE SETS


















COFFEE MACHINE AND HEATED WINDSHIELD for Advanced Easycontrol

EFFECTIVE: MAY 1, 2013F.O.B. SAVANNAH, GA 4CX-15 SUPER



NOTE: Hammer and/or BiDirectional Circuits are not included in prices shown and should be ordered from Options

under an H or L code. Heated Screen and Coffee Maker are not included in prices shown and should be ordered

from Options under an X code





EFFECTIVE: MAY 1,

2013

SECTION 2 - (Continued) ESSENTIAL FEATURES

LIST


200E205 92" 6 IN 1 Bucket $6,202

200E232 96" GP Bucket - for fixed dipper $3,024

200E233 96" 6 IN 1 Bucket $7,068



Toolcarrier






MANUAL PACK (E)

Easycontrol










LOADER BUCKETS (E)

4CX-15 SUPER

BACKHOE LOADER

U.S. DOLLAR


Direct Mount


EFFECTIVE: MAY 1,

2013


U.S.

ITEM LIST

STABILIZER FEET



COUNTERWEIGHTS

200Y476 560 Lbs. CWT w/ Cast Insert (4WS builds only) $645

ENGINE COMPARTMENT



OPERATOR'S AREA

200Y289 3" Seat belt $90

AIR CONDITIONING

Easycontrol





Easycontrol








BACKHOE LOADER

U.S. DOLLAR

PRICE PAGES



EFFECTIVE: MAY 1,

2013

SECTION 3 - (continued) OPTIONS - NEW FACTORY BUILT ORDERS:

U.S.

LIST

ITEM

SMOOTH RIDE

Easycontrol





Easycontrol




200L404 Hammer Pipeworkt for Advanced EasyContol 15' ExtraDig dipper $3,039



200V227 Hydraulic Hand Held Tool Circuit for Easycontrol $2,039







4CX-15 SUPER

BACKHOE LOADER

U.S. DOLLAR




EFFECTIVE: MAY 1,

2013


U.S.

LIST

ITEM




Q- FIT FORKS














4CX-15 SUPER

BACKHOE LOADER

U.S. DOLLAR




JCB BACKHOE LOADER

4CX-17 SUPER

CENTERMOUNT


MACHINE PRICE LIST

in U.S. Dollars




U.S. DOLLAR PRICE

PAGES

EFFECTIVE: MAY

1, 2013

STANDARD EQUIPMENT











hood pre-cleaner.





FRONT AXLE 4WS - Industrial duty 4WD Limited

Slip Differential; outboard planetary reduction, 4WD shift-on-the-go.






Power assisted, hydraulic brakes. Independent over center actuation park brake.






SAE maximum dig depth: Extradig dipper - 17' 7" - 21' 6". Two lever, JCB (SAE)

backhoe controls. Fabricated stabilizer legs with anti-drift valves. Front Fenders standard




Heavy Lift loader arms standard

4CX-17 SUPER



U.S. DOLLAR PRICE

PAGES

F.O.B. SAVANNAH,

GAEFFECTIVE: MAY 1, 2013


























SERVICEABILITY Ground level check for engine and transmission oil, brake fluid, engine coolant, and windshieldAND MAINTENANCE washer levels. Ground level top off of engine oil, transmission oil, hydraulic fluid, brake fluid,







LOADER














U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GA


PACKAGE BUILD CODE: 0614A

Environment: CAB

Controls: ADV. EASY

Gearbox: Autoshift

Dig Depth: 17FT

SALES Horse Power: 109HP

CODE ITEM 4wd-XDIG

0839

200A197

200B64Q

200C786

200D314

200E244

200F832

200G450

200R239

200W84F

200Y428

200P209

200Z557

SUGGESTED LIST PRICE $184,471

Bolt-on Cutting Edge for Loader Bucket - 96"

Air Conditioning for 109HP & Advanced Easycontrol


5/8 Loader Arm Pipework for Advanced Easycontrol







4CX-17 SUPER

BACKHOE LOADER

4CX-17 SUPER, 4WD, CM, 109HP, P/SHIFT, ADVANCED EASYCONTROL

CAB With Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)


220 Lbs. CWT (must be ordered with 2WS extending dipper or hammer)




F.O.B. SAVANNAH, GA

SECTION 2 - ESSENTIAL FEATURES:


POWERDIPPER TYPE

COUNTER

WEIGHTU.S.

CODE ITEM LIST

BASE MACHINE (E)

0814 4WD EASY 109HP EXTRADIG 750 lbs $154,078

0839 4WD ADV. EASY 109HP EXTRADIG 750 lbs $155,578


200A070 $3,966

200A084 $11,071

200A086 $15,806

200A102 $12,118

200A104 $16,853


200A196 $12,118

200A197 $16,853CAB With Air Conditioning & Air Ride Seat (ADVANCED EASYCONTROL)


CAB (EASYCONTROL)





HEATER

HEATER & AC

HEATER

HEATER & AC

HEATER

HEATER & AC


NO






4CX-17 SUPER

BACKHOE LOADER

Easycontrol








200C750 $0

200C751 $325

200C754 $1,000

200C755 $1,325

200C786 $0

200C787 $325

200C790 $1,000

200W84F $0


200B64Q $5,907

200B64W $7,402

200B29Q $7,857

200B29W $9,352

200D200 No Excavator Bucket $0

200D311 $1,123

200D312 $1,289

200D314 $1,326

200D315 $1,492

200D316 $1,812

200D317 $2,132




EFFECTIVE: MAY 1, 2013F.O.B. SAVANNAH, GA






Easycontrol


TIRES ( E )



DRIVE CONTROLS (E)



U.S. DOLLAR PRICE PAGES 4CX-17 SUPER

BACKHOE LOADER

GALAXY TIRE SETS

MICHELIN TIRE SET









If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code


EFFECTIVE: MAY 1,

2013


LIST


200E232 96" GP Bucket - for fixed dipper $3,024

200E233 96" 6 IN 1 Bucket $7,068



Toolcarrier






MANUAL PACK (E)

Easycontrol










LOADER BUCKETS (E)

4CX-17 SUPER

BACKHOE LOADER

U.S. DOLLAR


Direct Mount


EFFECTIVE: MAY 1,

2013


U.S.

LIST

ITEM

STABILIZER FEET



ENGINE COMPARTMENT



OPERATOR'S AREA

200Y289 3" Seat belt $90

AIR CONDITIONING

Easycontrol





Easycontrol







SMOOTH RIDE

Easycontrol




HYDRAULIC OPTIONS

HAMMER PIPEWORK NOT AVAILABLE ON 17FT MACHINES

BI- DIRECTIONAL CIRCUITS NOT AVAILABLE ON 17FT MACHINES






4CX-17 SUPER

BACKHOE LOADER

U.S. DOLLAR




EFFECTIVE: MAY 1,

2013


U.S.

LIST

ITEM




Q- FIT FORKS














4CX-17 SUPER

BACKHOE LOADER

U.S. DOLLAR




COMPACTION

VIBRATORY SINGLE DRUM ROLLER

VM115





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE JCB 444 TA, Tier III compliant, 130 hp, JCB Dieselmax turbo-charged diesel engine, Dry cartridge

air cleaner plus safety cartridge. Water separator, spin-on oil filter, antifreeze protection to

-30 degrees Fahrenheit.

TRANSMISSION Hydrostatic drive to front drum and rear wheels with traction control.

PARKING BRAKE Spring applied, hydraulic release disk brakes on the drum and rear axle.

ELECTRICAL 12 volt with 95 amp alternator and 540 CCA battery. Fuses and relays are centrally located under

operator's platform.

TIRES 115D: 23.1 - 26 / 8 PR AWT

115PD: 23.1 - 26 / 12 PR Tractor Tread

DRUMS Width: 82.7"

Diameter 115D: 59.1"

Diameter 115PD: 55.1" (63.0" over pads)

COMPACTION VM115D VM115PD

1 2 1 2

Frequency: 1860 vpm 2160 vpm 1860 vpm 2160 vpm

Amplitude: 0.077 in 0.035 in 0.077 in 0.035 in

Centrifugal force: 58675 lbf 36644 lbf 63396 lbf 39566 lbf

OPERATOR'S ROPS, hand rails, adjustable cushioned seat with seatbelt, automatic vibration control,

PLATFORM instrument panel cover, horn. Option: EROPS cab, hand rails, adjustable cushioned seat

with seatbelt, wipers, defroster fan and front and rear worklights

INSTRUMENTATION Gauges: Fuel, Hourmeter and Engine temperature, Indicator lights for engine oil pressure,

alternator charge, hydraulic oil filter, air filter, neutral start position and parking brake.

VM115






Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - NOT CURRENTLY OFFERED

DEALER FIT - VM115 SINGLE DRUM ROLLER (LISTED SEPARATELY)

All prices and specifications subject to change without notice page 2 of 4 VM115 Single Dr. USD Price Page

U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES PACKAGE BUILD CODE: 3062A 3062B 3063A 3063BCODE ITEM VM115D VM115D VM115PD VM115PD

3022 VM115D Smooth drum roller Tier III (JCB Dieselmax 130

hp turbo-charged diesel engine)

3023 VM115PD Padfoot drum roller Tier III (JCB Dieselmax 130

hp turbo-charged diesel engine)

300A003 ROPS Frame VM75/115

300L006 FOPS for ROPS equipped machines VM75/115/132

300A002 Cab, with wipers and defroster fan, factory fit, front & rear worklights, (no heat) VM75/115/132

300L013 Heater and A/C for factory installed cab VM75/115/132

300B001 Operator's manual - English All VM

300L003 Instrument panel cover All VM

Shipping Weight - Lbs. 25,299 25,463 25,961 26,125

Shipping Weight - Kgs. 11,476 11,550 11,776 11,850

SUGGESTED LIST PRICE $131,806 $147,310 $139,672 $155,176

VM115


Select one of the following machine PACKAGE BUILD codes.



U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES WEIGHT U.S.

CODE ITEM (lbs.) (kgs.) LIST

BASE MACHINE (E)

3022 VM115D Smooth drum roller Tier III (JCB Dieselmax 130 hp turbo-charged diesel engine) 24,912 11,324 $127,970

3023 VM115PD Padfoot drum roller Tier III (JCB Dieselmax 130 hp turbo-charged diesel engine) 25,574 11,625 $135,836

MANUALS (E)

300B001 Operator's manual - English All VM 0 0 $0

OPERATOR'S AREA (E)

300A003 ROPS Frame VM75/115 0 0 $2,912

300L006 FOPS for ROPS equipped machines VM75/115/132 386 175 $924

VANDAL COVER (E)

300L003 Instrument panel cover All VM 1 0 $0


SALES WEIGHT U.S.


CAB CONDITIONING SYSTEMS

300A002 Cab, with wipers and defroster fan, factory fit, front & rear worklights, (no heat) VM75/115/132 550 250 $12,761

300L028 Heater for factory installed cab VM75/115/132 0 0 $1,422

300L013 Heater and A/C for factory installed cab VM75/115/132 0 0 $6,579

DRUMS

300K013 Polyurethane scrapers (D) VM115/132 20 9 $1,134

300K017 Padfoot shell and scraper bar-factory install VM115/132 3,400 1,545 $17,978

300K019 Padfoot shell and scraper bar-loose VM115/132 3,400 1,545 $20,478

OTHER MACHINE OPTIONS

300H002 Roadlights for ROPS equipped machines VM115/132 20 9 $1,288

300H004 Rotating Beacon VM115/132 0 0 $357

300H010 Roadlights for Cab equipped machines VM115/132 20 9 $1,288

300L002 Compactronic Compaction Meter (factory fitted) VM75/115/132 0 0 $4,872

300L055 Parts Book VM115 0 0 $88

300L020 Sunshade kit for ROPS (NOT compatible with 300L006) VM75/115/132 0 0 $1,316

300K009 Leveling blade kit (not compatible with smooth drum or shell kit) 1,100 500 $13,171

VM115



each E (Essential) category below. Select Options from Section 3 as needed.






VM132





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE JCB 444 TCA, Tier III compliant, 145 hp, turbo-charged diesel engine with charged

air cooler, Dry cartridge air cleaner plus safety cartridge. Water separator, spin-on oil filter, antifreeze

protection to -30 degrees Fahrenheit.





TIRES: 132D: 23.1 - 26 / 8 PR AWT

132PD: 23.1 - 26 / 12 PR Tractor Tread

DRUMS Width: 82.7"

Diameter 132D: 59.1"



1 2 1 2





PLATFORM instrument panel cover, horn. Option: EROPS cab, hand rails, adjustable cushioned seat

with seatbelt, wipers, defroster fan and front and rear worklights



VM132









U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES PACKAGE BUILD CODE: 3068A 3069A 3069BCODE ITEM VM132D VM132PD VM132PD

3026

3027

300A004 ROPS Frame VM132


300A002Cab, with wipers and defroster fan, factory fit, front & rear

worklights, (no heat) VM75/115/132

300L013 Heater and A/C for factory installed cab VM75/115/132






$168,098

VM132


VM132D Smooth drum roller Tier III (JCB 444, 145 hp turbo-charged

diesel engine with charged air cooler)

VM132PD Padfoot drum roller Tier III (JCB 444, 145 hp turbo-charged

diesel engine with charged air cooler)

3068BVM132D



U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

3026 28,660 13,027 $148,759

3027 29,542 13,428 $156,769

MANUALS (E)


OPERATOR'S AREA (E)

300A004 ROPS Frame VM132 0 0 $3,058


VANDAL COVER (E)



SALES WEIGHT U.S.






DRUMS

300K013 Polyurethane scrapers (D) VM115/132 20 9 $1,134

300K017 Padfoot shell and scraper bar-factory install VM115/132 3,400 1,545 $17,978

300K019 Padfoot shell and scraper bar-loose VM115/132 3,400 1,545 $20,478


300H002 Roadlights for ROPS equipped machines VM115/132 20 9 $1,288


300H010 Roadlights for Cab equipped machines VM115/132 20 9 $1,288



300K022 Leveling blade kit (not compatible with smooth drum or shell kit) 1,100 500 $14,922

VM132


VM132D Smooth drum roller Tier III (JCB 444, 145 hp turbo-charged diesel

engine with charged air cooler)

VM132PD Padfoot drum roller Tier III (JCB 444, 145 hp turbo-charged diesel

engine with charged air cooler)

If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E

(Essential) category below. Select Options from Section 3 as needed.

JCB cannot normally modify existing factory inventory. Dealers should order and install items from the Dealer Fit Section to change

existing machines.



VIBRATORY TRENCH COMPACTOR

VM1500





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE Kubota 23.5 hp, Tier IV, water-cooled diesel engine. Dry cartridge air cleaner and

cartridge type fuel filter.

TRANSMISSION Hydrostatic drive to all four drums.

PARKING BRAKE Hydraulically released multi-disk brake on rear drums.

ELECTRICAL 12 volt, with 40 amp alternator.

DRUMS Width: 24.8" or 33.5"

Diameter: 19.7"

EXCITER Single shaft frame mounted exciter with manual reverse.

COMPACTION Frequency: 1,860 vpm

Amplitude: 0.09 in

Centrifugal force: 18,880 lbf

CONTROLS Radio remote control ("R" model) or manual control ("M" model)

INSTRUMENTATION Gauges: Hourmeter, Indicator lights for engine oil pressure, engine temperature indicator,

alternator charge and pre-heating.

VM1500




Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS - NOT CURRENTLY OFFERED



DEALER FIT - VM1500 TRENCH COMPACTORS (LISTED SEPARATELY)

All prices and specifications subject to change without notice page 2 of 3 VM1500 Trencher USD Price Page

U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES PACKAGE BUILD CODE: 3205A 3206A 3207A 3208ACODE ITEM VM1500 VM1500 VM1500 VM1500

3205 VM1500R24 Trench Roller with 24.8" drums and Remote controls

3206 VM1500R33 Trench Roller with 33.5" drums and Remote controls

3207 VM1500M24 Trench Roller with 24.8" drums and Manual controls

3208 VM1500M33 Trench Roller with 33.5" drums and Manual controls

320A001 Operator's manual - English



SUGGESTED LIST PRICE $42,822 $43,261 $39,520 $39,959


SALES WEIGHT U.S.


DRUM OPTIONS

320H001 Drum conversion kit from 24.8" to 33.5" 1,090 495 $3,924

320H003 Anti- Vandalism Kit - - $342

VM 1500





All prices and specifications subject to change without notice page 3 of 3 VM1500 Trencher USD Price Page


VM75





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE JCB 444TA, Tier III compliant, 84 hp, diesel engine, air cleaner with dual elements.

Water separator, spin-on oil filter, antifreeze protection to -30 degrees Fahrenheit.





TIRES 75D: 14.9 - 24 6 ply AWT

75PD:14.9 - 24 8 ply Dyna Torque II

DRUMS Width: 68.9"

Diameter 75D: 48"



1 2 1 2





PLATFORM instrument panel cover, horn. Option: Enclosed ROPS cab, hand rails, adjustable cushioned

seat, seatbelt, wipers, defroster fan.



VM75








All prices and specifications subject to change without notice page 2 of 4 VM75 Single Drum USD Price Page

U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES PACKAGE BUILD CODE: 3070A 3071A 3071BCODE ITEM VM75D VM75PD VM75PD

3017 VM75D Smooth drum roller (JCB 444TA Tier III 84 hp diesel engine)

3018 VM75PD Padfoot drum roller (JCB 444TA Tier III 84 hp diesel engine)

300A003 ROPS Frame VM75/115


300A002 Cab, with wipers and defroster fan, factory fit, front & rear worklights, (no heat) VM75/115/132



Shipping Weight - Lbs. 16,481 17,142 17,305

Shipping Weight - Kgs. 7,476 7,776 7,850


VM75


3070BVM75D

$125,212

16,645

7,550




U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

3017 VM75D Smooth drum roller (JCB 444TA Tier III 84 hp diesel engine) 16,094 7,315 $105,873

3018 VM75PD Padfoot drum roller (JCB 444TA Tier III 84 hp diesel engine) 16,755 7,616 $112,671

MANUALS (E)


OPERATOR'S AREA (E)

300A003 ROPS Frame VM75/115 0 0 $2,912


VANDAL COVER (E)



SALES WEIGHT U.S.






DRUMS

300K006 Polyurethane scrapers (D) VM75 20 9 $794

300K007 Padfoot shell and scraper bar-factory install VM75 0 0 $12,760

300K008 Padfoot shell and scraper bar-loose VM75 2,300 1,045 $15,260


300H022 Roadlights for ROPS equipped machines VM75 20 9 $1,288

300H023 Roadlights for Cab equipped machines VM75 20 9 $1,288



300L010 Parts Book VM75 0 0 $108


300K038 Leveling blade kit (not compatible with smooth drum or shell kit) 790 359.1 $12,358

VM75








VIBRATORY TANDEM ROLLER

VMT160





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE Kubota 23 hp Tier IV, 3-cylinder diesel engine. 12 gallon fuel tank.

TRANSMISSION Hydrostatic drive to both drums.

PARKING BRAKE SAHR / Hydrostatically released multi-disc brake on both drums.

ELECTRICAL 12 volt with 40 amp alternator and 300 CCA battery. Auxillary socket for rotating beacon. Reverse alarm.

DRUMS Dual drum vibration with independent front/rear shut-off.

Dual, spring loaded, retractable, polyurethane scrapers on each drum.

VMT160-90 VMT160-90TSC

Drum Width: 35.4" 35.4"

Working Width: 35.4" 39.4"

Diameter: 22.8" 22.8"

COMPACTION

Frequency:

Amplitude:

Centrifugal force:

SPRAY SYSTEM 33 gallon watertank, pressurized water filtering sprinkler system with solid copper spray bars and adjustable

nozzles. Spray nozzles are removable for easy, on site cleaning. Operator controlled variable flow rate.

OPERATOR'S ROPS, hand rails, cup holder, adjustable cushioned seat with armrests and seatbelt, emergency shutdown button.

PLATFORM Seat is equipped with engine shut- off safety switch

INSTRUMENTATION Gauges: Hourmeter, indicator lights for fuel level, alternator charge, vibration, sprinkler system,

parking brake, engine oil pressure, air and hydraulic oil filter condition and neutral start position.

2,068…4,047 lbf

VMT 160


VMT160 - ALL MODELS

3000…3960 vpm

0.02 in






DEALER FIT - LISTED SEPARATELY FOR ALL TANDEM ROLLERS

All prices and specifications subject to change without notice page 2 of 4 VMT 160 USD Price Page

U.S. DOLLAR

PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 3154A 3160AVMT160-90 VMT160-90

SALES TSC ROPS

CODE ITEM ROPS

3154 VMT160-90TSC Tandem Drum Vibratory Roller fixed center joint with 35.4" drums - 23HP ENGINE

3160 VMT160-90TSC Tandem Drum Vibratory Roller with 35.4" drums - 23HP ENGINE

310A017 Fixed ROPS Frame

310B018 Operator's manual - English

310L044 Instrument panel cover

310C011 North American Build

Shipping Weight - Lbs. 3,650 3,650

Shipping Weight - Kgs. 1,656 1,656

SUGGESTED LIST PRICE $38,355 $866

VMT 160


Select ONE of the following machine PACKAGE BUILD codes.



U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

3154 VMT160-90TSC Tandem Drum Vibratory Roller fixed center joint with 35.4" drums - 23HP ENGINE 3,650 1,659 $37,489

3160 VMT160-90TSC Tandem Drum Vibratory Roller with 35.4" drums - 23HP ENGINE 3,650 1,659 $0

MANUALS (E)

310B018 Operator's manual - English 0 - $0

OPERATOR'S AREA (E)

310A017 Fixed ROPS Frame 0 - $866

310L044 Instrument panel cover 0 0 $0

NORTH AMERICAN ESSENTIAL CODE (E)

310C011 North American Build 0 - $0


SALES WEIGHT U.S.



310A015 Folding ROPS frame 0 - $1,264

310H019 Road Travel Lights 0 - $638

310H021 Rotating Beacon 0 - $193

310L052 Parts Book TSC 0 - $88

310L042 Tool Bag 0 - $88

310L066 Canopy VMT160 0 0 $1,244

VMT 160









VMT260





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE Kubota 32 hp Interim Tier IV, 3-cylinder diesel engine. 25 gallon fuel tank

TRANSMISSION Hydrostatic drive to both drums.

PARKING BRAKE SAHR / Hydrostatically released multi-disc brake on both drums.

ELECTRICAL 12 volt with 40 amp alternator and 510 CCA battery. Auxillary socket for beacon. Reverse alarm.

DRUMS Dual drum vibration with independent front/rear shut-off. 80mm manual drum offset

Dual, spring loaded, retractable, polyurethane scrapers on each drum.

VMT260-100 VMT260-120

Drum Width: 39.4 in 47.2 in

Diameter: 27.5 in 27.5 in

COMPACTION VMT260

Frequency: 3000…3960 vpm

Amplitude: 0.02 in

Centrifugal force: 5,845…10,116 lbf

SPRAY SYSTEM 33 gallon watertank, pressurized water filtering sprinkler system with solid copper spray bars and adjustable

nozzles. Spray nozzles are removable for easy, on site cleaning. Operator controlled variable flow rate.

OPERATOR'S ROPS, hand rails, cupholder, worklights, adjustable cushioned seat with armrests and seatbelt, emergency

PLATFORM shutdown button. Seat equipped with an engine shut-off safety switch

INSTRUMENTATION Gauges: Hourmeter, indicator lights for fuel level, alternator charge, vibration, sprinkler system,

parking brake, engine oil pressure, air and hydraulic oil filter condition and neutral start position.

VMT 260







DEALER FIT - LISTED SEPARATELY FOR ALL TANDEM ROLLERS

All prices and specifications subject to change without notice page 2 of 4 VMT260 USD Price Page

U.S. DOLLAR

PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 3164A 3165AVMT260-100 VMT260-120

SALES 32 HP 32 HP

CODE ITEM ROPS ROPS

3151 VMT260-100 Tandem Drum Vibratory Roller offset with 39.4" drums - 32HP ENGINE

3152 VMT260-120 Tandem Drum Vibratory Roller offset with 47.2" drums - 32HP ENGINE

310A018 Fixed ROPS Frame

310B018 Operator's manual - English

310C011 North American Build

310L045 Instrument panel cover




VMT 260


Select ONE of the following machine PACKAGE BUILD codes.



U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

3151 VMT260-100 Tandem Drum Vibratory Roller offset with 39.4" drums - 32HP ENGINE 5,732 2,605 $49,409

3152 VMT260-120 Tandem Drum Vibratory Roller offset with 47.2" drums - 32HP ENGINE 5,952 2,705 $50,164

MANUALS (E)

310B018 Operator's manual - English 0 - $0

OPERATOR'S AREA (E)

310A018 Fixed ROPS Frame 0 - $1,145

310L045 Instrument panel cover 0 - $1,535

ESSENTIAL CODE (E)

310C011 North American Build 0 - $0


SALES WEIGHT U.S.



310A019 Folding ROPS frame 0 - $1,535

310H021 Rotating Beacon 0 - $193

310H027 Road Travel Lights 0 - $720

310L046 Parts Books 0 - $88

310L047 Tool Bag 0 - $88

310L063 Sunroof mounted on ROPS VMT260 0 - $1,532

VMT 260








COMPACT EXCAVATOR

JCB MINI EXCAVATOR

8008MICRO EXCAVATOR



MACHINE PRICE LIST

in U.S. Dollars

8008 MICRO EXCAVATOR U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE 0.8 liter (46.5 CID), Interim Tier IV compliant 12 SAE net horsepower Perkins engine,

centrifugal dry type air cleaner. Water separator, spin on oil filter, thermostart assist,

antifreeze protection to -35 degrees F.

TRANSMISSION Independent left and right track control. Hydraulic pumps drive integral track motors

and gearbox. High torque 1.1 mph travel speed.

TRACKS 7 inch rubber tracks with 2 rollers per side result in 3.3 psi ground pressure.

5.0"of ground clearance. Hydraulically acuated expanding undercarriage providing

a machine width of 28" retracted and 35" expanded.

EXCAVATOR 5' 6" Max. dig depth with standard 2'10" dipper. Mechanical controls, with selectable DPC - Dual

Pattern Control (SAE and ISO) changed by electric toggle switch.

Auxiliary circuit provides 5.0 GPM for JCB hydraulic breakers and other approved attachments.

Boom swing left 70 degree, right 70 degree. Single acting hydraulics fit as standard.

CANOPY Meets SAE TOPS/FOPS/FOGS requirements. Dual side entry into operator's station.

Vinyl operators seat is adjustable forward and aft. Slew lock prevents movement during travel.

Excavator controls are low lever effort - mechanically activated. All models are equipped

with safety interlock to prevent inadvertent boom/bucket movement. Hand operated

tracking levers. Instrument panel contains: ignition switch, fuses, auxiliary switches,

engine audio and visual warning indicators and fuel guage.

Foot pedals activiate auxiliary hydraulics and boom offset.






DEALER FIT - COMPACT (LISTED SEPARATELY FOR ALL COMPACT MINI / MIDI / MICRO)

All prices and specifications subject to change without notice page 2 of 5 8008 MICRO USD Price Page

8008 MICRO EXCAVATOR U.S. DOLLAR

PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 8092BSALES 8008

CODE ITEM CANOPY

8093 8008 Micro excavator with 12 hp diesel engine, dozer blade and 5' 6" dig depth

820A003 Rear mounted TOPS frame with front handrail

820B001 Rubber Tracks - 7 inch width

820C002 Dual Pattern Control (DPC) system - ISO to SAE

820D002 High back vinyl seat

820E614 American language pack

820F001 Standard Dipper 34.9" (887mm)

820G002 Grease tensioner for tracks

820H001 Single acting auxiliary hydraulic circuit

820J003 Boom mounted worklight

Shipping Weight - Lbs. 1,929

Shipping Weight - Kgs. 875


Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4.

Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements

please order a machine using the Custom Build, Attachments & Options Sections following.


8008 MINI EXCAVATOR U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

8093 8008 Micro excavator with 12 hp diesel engine, dozer blade and 5' 6" dig depth 1,929 877 $20,249

OPERATOR'S AREA (E)

820A001 Front mounted TOPS frame 25 11 $442

820A003 Rear mounted TOPS frame with front handrail 29 13 $746

820A004 Front handrail 4 2 $130

UNDERCARRIAGE (E)

820B001 Rubber Tracks - 7 inch width 250 114 $0

CONTROLS (E)

820C002 Dual Pattern Control (DPC) system - ISO to SAE 10 5 $442

SEATS (E)

820D002 High back vinyl seat 35 16 $166


820E614 American language pack 1 0 $0

820E615 French language pack 1 0 $0

DIPPER (E)

820F001 Standard Dipper 34.9" (887mm) 400 182 $365

TRACK TENSIONER (E)

820G002 Grease tensioner for tracks 2 1 $0

HYDRAULIC CIRCUIT & PIPEWORK OPTIONS

820H001 Single acting auxiliary hydraulic circuit 15 7 $151







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


OPERATORS COMPARTMENT OPTIONS **

820J003 Boom mounted worklight 2 1 $105

820L003 Toolkit 10 5 $67


SALES WEIGHT U.S.


BUCKET OPTIONS

820M001 6" Standard duty - .30 cu. Ft capacity 70 32 $429



820M004 28" Standard duty - 2.0 cu. Ft capacity 160 73 $553

820M005 16" Heavy duty - 1.0 cu. Ft capacity 110 50 $533

820M006 Bucket - 12 inch (300mm) with Additional Tooth 100 45 $509


** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB

AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO

TECHWEB BULLETIN 3441.



JCB MINI EXCAVATOR

8018





MACHINE PRICE LIST

in U.S. Dollars


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE 1.13 L (69.0 CID ), Interim Tier IV compliant, 19 net hp, Perkins engine, centrifugal dry type air cleaner.

Water separator, spin - on oil filter, thermostart assist, anti-freeze protection to -35 degrees F.

New 500 hour service interval - twice as long as previous model.

TRANSMISSION Independent track control. Hydraulic pumps drive integral track motors and gearbox.

Two speed travel - 1.24 mph in low and 2.36 mph in high. Auto kickdown feature allows machine to

automatically change from high to low when needed, maximizing power and productivity.

TRACKS Rubber or steel track options hydraulically adjusted. Under carriage rollers 3 per side. Track width 9 inches.

Ground pressure 4.55 lb. per square inch. Ground clearance 6". The 8018 features a hydraulically actuated

expanding undercarriage providing a machine width of 38.18" retracted and 53.15" expanded. Track tension

is maintained through a grease cylinder

ELECTRICAL 12 volt, 60 Ah battery, with 40 amp alternator. Waterproof wire harness connectors meet/exceed

IP67 electrical system rating.

EXCAVATOR Max. dig depth with standard 45.7" dipper is 8'1". New tubular boom design provides increased strength,

visibility and improved hose and tube protection vs. conventional steel box structure design.

Dual Pattern Controls (DPC) easily changes controls from ISO (Excavator) to SAE (Backhoe).


Boom swing left 55 degrees, right 75 degrees. Bucket rotation 198 degrees. Less excavator bucket.

CANOPY Meets SAE TOPS/FOPS/FOGS requirements, left side entry. Canopy and optional cab tilts up for improved

access to mid-ship of the machine for service and maintenance. Vinyl operators seat, adjustable forward

and aft. FOGS Guard added for extra level of safety and protection. Cab swing lock pin and lockable

tool box. Excavator controls are servo operated (hydraulic) . All models equipped with safety

interlock. Hand operated independent track drive levers. Instrument panel contains: ignition switch, fuses,

auxiliary switches and engine audio visual warning indicators. Foot pedals for boom swing and auxiliary circuit.

OPTIONAL CAB AREA Meets SAE TOPS/FOPS/FOGS requirements. Same equipment as canopy with fabric seat, heater,

front and side opening windows. Left side cab entry and exit. Optional cab tilts up for improved access

to mid-ship of the machine for service and maintenance.







All prices and specifications subject to change without notice page 2 of 5 8018 USD Prices Page


PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 8046A 8046BSALES 8018 8018


8062 8018 base m/c, servo controls, 2 speed, expanding undercarriage (19.7 Gross/19 hp Net)

800A041 TOPS/FOPS/FOGS cab, heater windshield wiper and fabric seat

800A038 TOPS/FOPS/FOGS canopy, vinyl seat

800B017 9" (230mm) Rubber Tracks

800C026 DPC - Dual pattern controls change from ISO (Excavator) to SAE (Backhoe)

800D010 Vinyl static seat

800D012 Fabric static seat

800E698 American operator handbook

800F016 Standard dipper - 45.7" (1161mm) Provides a dig depth of 8'-1"

800G012 Standard Dozer Blade

800K012 FOGS Guard Kit

800H044

800J012 Worklights - For Cab Only

800L045 Track Lever Pedals




Double acting hydraulics to dipper end (suitable for thumb attachment or auger) (not compatible

w/Gravemaster Dipper)

Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build

configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using

the Custom Build, Attachments & Options Sections following.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

8062 8018 base m/c, servo controls, 2 speed, expanding undercarriage (19.7 Gross/19 hp Net) 3,554 1,615 $26,148

OPERATORS AREA (E)

800A038 TOPS/FOPS/FOGS canopy, vinyl seat - - $770

800A041 TOPS/FOPS/FOGS cab, heater windshield wiper and fabric seat 196 89 $3,644

UNDERCARRIAGE (E)

800B013 9" (230mm) Steel Tracks 313 142 $2,178

800B017 9" (230mm) Rubber Tracks 220 100 $1,463

CONTROLS (E)

800C026 DPC - Dual pattern controls change from ISO (Excavator) to SAE (Backhoe) 40 18 $2,767

SEATS (E)

800D010 Vinyl static seat - - $0

800D012 Fabric static seat - - $0

800D011 Vinyl suspension seat 5 2 $436

800D013 Fabric suspension seat 5 2 $436


800E698 American operator handbook - - $40

DIPPER (E)

800F016 Standard dipper - 45.7" (1161mm) Provides a dig depth of 8'-1" 68 31 $282

800F017 Long Dipper - 49.6" (1261mm) Provides a dig depth of 8'-5" 70 32 $338

800F018 75 34 $676

DOZER (E)

800G012 Standard Dozer Blade 70 32 $0

OPERATORS COMPARTMENT (E)

800K012 FOGS Guard Kit 44 20 $0


800H044 15 7 $406

Grave Master Dipper - 59" (1500mm) Provides a dig depth of 9'-2.5" (not compatible with auxiliary

hydraulic pipework)

Double acting hydraulics to dipper end (suitable for thumb attachment or auger) (not compatible

w/Gravemaster Dipper)







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


OTHER HYDRAULIC OPTIONS

800H050 Variable displacement hydraulic pump 15 7 $1,014

800L035 Travel Alarm 5 2 $478

800L022 Panolin biodegradeable hydraulic oil - - $592

OPERATORS COMPARTMENT OPTIONS

800J012 Worklights - For Cab Only 10 5 $144

800J015 Worklights - For Canopy Only 10 5 $144

800L017 Exterior mirror - For Cab Only 5 2 $82

800L409 Exterior mirror - For Canopy Only 5 2 $82

800L045 Track Lever Pedals 1 0 $67

800L024 Sun Blind 2 1 $141

BUCKET OPTIONS

800M010 6" Standard duty - 0.33 cu. Ft. capacity heaped 80 36 $421





800M015 18" High Breakout Performance - 1.14 cu. Ft. capacity

heaped (Incompatible with mechanical quick hitch)

140 64 $592



800M018 30" Square hole bucket - 1.77 cu. Ft. capacity heaped 170 77 $620

800M019 35" Ditching - 2.75 cu. Ft. capacity heaped 180 82 $585

800M020 39" Ditching - 3.07 cu. Ft capacity heaped 190 86 $684

800M021 Trapezoidal Bucket 180 82 $1,464

OTHER OPTIONS

800J013 Rotating Beacon 2 1 $85

800L015 Parts Book - North American Builds 2 1 $85

800L019 Tool kit including grease gun and spanner wrenches 10 5 $85

800L025 Battery Isolator 2 1 $113

EXCAVATOR QUICK HITCH

800M023 Mechanical Quick Hitch for dipper mounted attachments 150 68 $1,438

800M024 Pin set required to connect attachment to Quick Hitch 10 5 $44

SECTION 4 - ATTACHMENTS


*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8018


AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER

TO TECHWEB BULLETIN 3441.


JCB MINI EXCAVATOR

8025Z



MACHINE PRICE LIST

in U.S. Dollars

8025Z MINI EXCAVATOR U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE 1.49 liter (92 CID), Interim Tier IV compliant 28 gross/26.8 SAE net horsepower, Perkins engine,




and gearbox. Two speed travel 1.5 mph and 2.7 mph.

TRACKS 10 inch rubber tracks (optional steel tracks) with 3 rollers per side result in 4.5 psi

ground pressure. 12 inches of ground clearance

ELECTRICAL 12 volt system with 65 amp alternator, 475 CCA heavy duty battery. Waterproof

wire harness connectors

EXCAVATOR

Pattern Control (JCB Plus and ISO) activated via electric toggle switch. Auxiliary circuit

provides 15.3 GPM for JCB hydraulic breakers and other approved attachments.

Boom swing left 45 degree, right 60 degree. Less excavator bucket. Single Acting

Hydraulics Standard fit.

CANOPY Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.

Vinyl suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box

Left control pod rotates 90 degrees to provide easy access to the operators compartment

and locks the excavator controls to prevent inadvertent boom/bucket movement.

Hand operated tracking levers with flip over foot pedals. Instrument panel contains:

ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge.

Single foot pedal to activate aux hydraulics and boom offset. Pedal operation is changed

via electric switch on the left joystick. Zero tailswing allows for operation in tight confining areas.

CAB (OPTIONAL) Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.

Cloth suspension operators seat, adjustable forward and aft. Slew lock and lockable tool box

Enclosed cab is equipped with heater/defroster, windshield wiper, front and side opening windows.







8' 5" Max. dig depth with standard 3'7" dipper. Servo controls, with selectable DPC - Dual







All prices and specifications subject to change without notice page 2 of 5 8025Z MINI USD Price Page


PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 8425A 8425BSALES 8025Z 8025Z


8428 8025Z Base machine (3 cylinder 1.5 liter Perkins diesel engine, 28 hp gross / 26.8 hp net)

800A405 Cab TOPS/FOPS/FOGS certified with Heater

800A407 Canopy TOPS/FOPS/FOGS certified

800B418 Rubber Tracks - 10 inch width, Bridgestone


800D404 Suspension seat - Vinyl

800D405 Suspension seat - Fabric



800G402 Long dozer blade (Extends dozer blade reach by 9 inches)

800H407 Double acting auxiliary hydraulic circuit with change over valve

800J407 Front work lights (cab mounted)

800J409 Front work lights (canopy mounted)

800K403 FOGS guard kit




Select one of the following machine PACKAGE BUILD codes. Package build configurations cannot normally be changed. If a

Package Build does not meet your requirements please order a machine using the Custom Build Section. Attachments &

Options Sections following.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

8428 8025Z Base machine (3 cylinder 1.5 liter Perkins diesel engine, 28 hp gross / 26.8 hp net) 4,359 2,002 $34,136

OPERATOR'S AREA (E)

800A405 Cab TOPS/FOPS/FOGS certified with Heater 524 238 $3,036

800A407 Canopy TOPS/FOPS/FOGS certified 313 142 $1,413

UNDERCARRIAGE (E)

800B418 Rubber Tracks - 10 inch width, Bridgestone 175 80 $386

800B419 Steel Tracks - 10 inch width 241 110 $1,352

CONTROLS (E)


SEATS (E)

800D404 Suspension seat - Vinyl 48 22 $259

800D405 Suspension seat - Fabric 48 22 $259


800E426 American language pack - - $0

800E420 Spanish language pack - - $0

DIPPER (E)


DOZER BLADE (E)

800G400 Standard dozer blade (5' 1" wide) 350 159 $0

800G402 Long dozer blade (Extends dozer blade reach by 9 inches) 400 182 $310


800K403 FOGS guard kit 42 19 $0


800H407 Double acting auxiliary hydraulic circuit with change over valve 18 8 $324







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



800L416 Panolin 46 Biodegradable Oil 30 14 $764

800J407 Front work lights (cab mounted) 2 1 $143

800J409 Front work lights (canopy mounted) 2 1 $143

800J405 Beacon - Amber rotating - 12v 2 1 $204

800L413 External mirror - cab mounted 1 0 $84


800L419 Toolkit 5 2 $59


EXCAVATOR & BUCKET OPTIONS (not compatible with Quickhitch)






800M415 39" Ditching Bucket - 5.07 cu. Ft capacity 170 77 $733

EXCAVATOR & BUCKET OPTIONS (Quickhitch compatible)







800M409 Mechanical quick hitch 100 84 $1,182

800M426 Pin set required to connect attachments to the quick hitch (840M409) 30 14 $78






*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8025Z


JCB MINI EXCAVATOR

8029

EFFECTIVE: NOVEMBER 1, 2013


MACHINE PRICE LIST

in U.S. Dollars


PRICE PAGES

F.O.B.

SAVANNAH, GAEFFECTIVE: NOVEMBER 1, 2013

STANDARD EQUIPMENT










EXCAVATOR

Pattern Control (JCB Plus and ISO) activated via electric toggle switch. Auxiliary circuit




















via electric switch on the left joystick. Convention tailswing allows for operation in tight areas.









PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 8429A 8429BSALES 8029 8029


8429 8029 Base machine (3 cylinder 1.5 liter Perkins diesel engine, 28 hp gross / 26.8 hp net)



800B418 Rubber Tracks - 10 inch width, Bridgestone






800G402 Long dozer blade (Extends dozer blade reach by 9 inches)









Package Build does not meet your requirements please order a machine using the Custom Build Section. Attachments &



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

8428 8029 Base machine (3 cylinder 1.5 liter Perkins diesel engine, 28 hp gross / 26.8 hp net) 4,359 2,002 $34,136

OPERATOR'S AREA (E)



UNDERCARRIAGE (E)

800B418 Rubber Tracks - 10 inch width, Bridgestone 175 80 $386


CONTROLS (E)


SEATS (E)






DIPPER (E)


DOZER BLADE (E)


800G402 Long dozer blade (Extends dozer blade reach by 9 inches) 400 182 $310










PRICE PAGES

F.O.B.



SALES WEIGHT U.S.









800L419 Toolkit 5 2 $59
























JCB MINI EXCAVATOR

8030Z



MACHINE PRICE LIST

in U.S. Dollars


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT










EXCAVATOR

Pattern Control (SAE and ISO) activated via electric toggle switch. Auxiliary circuit






























PRICE PAGES

F.O.B.





8432 8030Z Base machine (3 cylinder 1.5 liter Perkins diesel engine, 28 hp gross / 26.8 hp net)

800A408 Cab TOPS/FOPS/FOGS certified with Heater and Air Conditioning








800G401 Standard dozer blade (5' 1" wide)








Select one of the following machine PACKAGE BUILD codes. Package Build configurations cannot normally be changed. If a

Package Build does not meet your requirements please order a machine using the Custom Build Section, Attachments &




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

8432 8030Z Base machine (3 cylinder 1.5 liter Perkins diesel engine, 28 hp gross / 26.8 hp net) 5,697 2,590 $37,526

OPERATOR'S AREA (E)



800A408 Cab TOPS/FOPS/FOGS certified with Heater and Air Conditioning 385 175 $6,294

UNDERCARRIAGE (E)



CONTROLS (E)


SEATS (E)






DIPPER (E)


DOZER BLADE (E)












PRICE PAGES

F.O.B.



SALES WEIGHT U.S.









800L419 Toolkit 5 2 $59

























JCB MINI EXCAVATOR

8035Z



MACHINE PRICE LIST

in U.S. Dollars


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE 1.66 liter (101 CID), Interim Tier IV compliant 31.6 gross/30.4 SAE net horsepower, Perkins engine,









EXCAVATOR

Pattern Control (SAE and ISO) activated via electric toggle switch. Auxiliary circuit



Hydraulics Standard fit with optional double acting auxiliary hydraulics.


















10' 5" Max. dig depth with standard 5' dipper. Servo controls, with selectable DPC - Dual









PRICE PAGES

F.O.B.




SALES 8035Z 8035Z


8436 8035Z Base Machine (3 cylinder 1.7 liter Perkins Diesel engine, 31.6 HP Gross / 30.4 HP Net)








800F406 Standard Dipper 60" (1530mm)








SUGGESTED LIST PRICE ** $47,006 $45,383

Select one of the following machine PACKAGE BUILD codes. Package Build configurations cannot normally be changed. If a

Package Build does not meet your requirements please order a machine using the Custom Build Section, Attachments &




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

8436 8035Z Base Machine (3 cylinder 1.7 liter Perkins Diesel engine, 31.6 HP Gross / 30.4 HP Net) 6,230 2,832 $42,416

OPERATOR'S AREA (E)



800A414 Cab TOPS/FOPS/FOGS certified with Heater and Air Conditioning 575 261 $6,293

UNDERCARRIAGE (E)



CONTROLS (E)


SEATS (E)






DIPPER (E)

800F406 Standard Dipper 60" (1530mm) 524 238 $0

DOZER BLADE (E)












PRICE PAGES

F.O.B.



SALES WEIGHT U.S.









800L419 Toolkit 5 2 $59

























JCB MINI EXCAVATOR

8040Z





MACHINE PRICE LIST

in U.S. Dollars


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE 2.2 liter (134 CID), Interim Tier IV compliant 45 SAE net horsepower, Perkins engine, centrifugal dry

type air cleaner. Water separator, spin on oil filter, thermostart assist, antifreeze protection

to -35 degrees F.




ground pressure. 13.5 inches of ground clearance



EXCAVATOR 10' 11" Max. dig depth with standard 5' thumb compatible dipper. Servo controls, with

selectable DPC - Dual Pattern Control (SAE and ISO) activated via electric toggle switch.


Boom swing left 60 degree, right 65 degree. Less excavator bucket. Thumb mounting bracket

Single Acting Hydraulics Standard fit.
























All prices and specifications subject to change without notice page 2 of 5 8040 MINI USD Price Page


PRICE PAGES

F.O.B.





8441 8040 Base machine (4 cylinder Perkins diesel engine, 46.4 hp gross / 45 hp net)

840A005 Cab TOPS/FOPS/FOGS certified with Air Conditioning


840B001 Rubber Tracks - 16" width

840C002




840F003 Standard Dipper 60" (1525mm) - Thumb ready


840H001 Double acting auxiliary hydraulic circuit

840J001 Front work lights (2 each - cab and canopy mounted)

840J003 Rear worklight (1 each - cab and canopy mounted)





Dual Pattern Control (DPC) system - ISO to SAE - mechanical foot controlled

proportional auxiliary

Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package build





PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

8441 8040 Base machine (4 cylinder Perkins diesel engine, 46.4 hp gross / 45 hp net) 6,669 3,031 $50,195

OPERATOR'S AREA (E)

840A001 Cab TOPS/FOPS/FOGS certified 760 345 $4,955


840A005 Cab TOPS/FOPS/FOGS certified with Air Conditioning 782 345 $7,517

UNDERCARRIAGE (E)

840B001 Rubber Tracks - 16" width 457 207 $393

840B002 Steel Tracks - 16" width 336 152 $1,381

CONTROLS (E)

840C002 40 18 $368

840C006 40 18 $1,898

840C010 40 18 $1,898

SEATS (E)






DIPPER (E)

840F003 Standard Dipper 60" (1525mm) - Thumb ready 365 166 $0

DOZER BLADE (E)





840H001 Double acting auxiliary hydraulic circuit 30 14 $473

Dual Pattern Control (DPC) system - ISO to SAE - mechanical foot controlled proportional auxiliary

Dual Pattern Control (DPC) system - one joystick mounted electronic proportional auxiliary (cab

builds)

Dual Pattern Control (DPC) system - one joystick mounted electronic proportional auxiliary

(canopy builds)







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



840L007 Panolin Biodegradable Oil 7 3 $1,970

840J001 Front work lights (2 each - cab and canopy mounted) 10 5 $146


840J003 Rear worklight (1 each - cab and canopy mounted) 3 1 $71


840L015 Yellow roof moulding 15 7 $1,070

840L009 Toolkit 2 1 $60

840L003 Travel alarm 0 1 $378

840L017 Battery isolator 0 1 $320







840M006 47" Ditching bucket - 4.20 cu. Ft capacity 190 86 $749











JCB MINI EXCAVATOR

8045Z





MACHINE PRICE LIST

in U.S. Dollars



PRICE PAGES

F.O.B.

SAVANNAH, GA

EFFECTIVE: MAY 1,

2013

STANDARD EQUIPMENT

ENGINE 2.2 liter (134 CID), Interim Tier IV compliant 45 SAE net horsepower, Perkins engine, centrifugal dry

type air cleaner. Water separator, spin on oil filter, thermostart assist, antifreeze protection

to -35 degrees F.

TRANSMISSIONIndependent left and right track control. Hydraulic pumps drive integral track motors



ground pressure. 13.5 inches of ground clearance

ELECTRICAL12 volt system with 65 amp alternator, 410 CCA heavy duty battery. Waterproof


EXCAVATOR11' 7" Max. dig depth with standard 5'8" thumb compatible dipper. Servo controls, with selectable

DPC - Dual Pattern Control (SAE and ISO) activated via electric toggle switch. Auxiliary circuit

provides 23.8 GPM for JCB hydraulic breakers and other approved attachments. Boom swing

left 60 degree, right 65 degree. Less excavator bucket. Thumb mounting bracket; Single Acting










CAB (OPTIONAL)Meets SAE TOPS/FOPS/FOGS requirements. Left side entry into operator's station.

















PRICE PAGES

F.O.B.




SALES 8045Z 8045Z


8446 8045 Base machine (4 cylinder Perkins diesel engine, 46.4 hp gross / 45 hp net)


840A005 Cab TOPS/FOPS/FOGS certified with Air Conditioning

840B003 Rubber Tracks - 16" width

840C004




840F004 Standard Dipper 68" (1725mm) - Thumb ready


840H001 Double acting auxiliary hydraulic circuit

840J001 Front work lights (2 each - cab and canopy mounted)

840J003 Rear worklight (1 each - cab and canopy mounted)





Dual Pattern Control (DPC) system - ISO to SAE - mechanical foot controlled

proportional auxiliary

Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4.

Package build configurations cannot normally be changed. If a Package Build does not meet your requirements




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

8446 8045 Base machine (4 cylinder Perkins diesel engine, 46.4 hp gross / 45 hp net) 7,981 $55,652

OPERATOR'S AREA (E)

840A001 Cab TOPS/FOPS/FOGS certified 760 $4,955

840A002 Canopy TOPS/FOPS/FOGS certified 640 $1,801

840A005 Cab TOPS/FOPS/FOGS certified with Air Conditioning 782 $7,517

UNDERCARRIAGE (E)

840B003 Rubber Tracks - 16" width 457 $393

840B004 Steel Tracks - 16" width 336 $1,381

CONTROLS (E)

840C004 40 $368

840C008 40 $1,898

840C012 40 $1,898

SEATS (E)

840D001 Suspension seat - Fabric 125 $0

840D002 Suspension seat - Vinyl 125 $0




DIPPER (E)

840F004 Standard Dipper 68" (1725mm) - Thumb ready 365 $0

DOZER BLADE (E)

840G001 Standard dozer blade (6' 6" wide) 600 $0


840K002 FOGS guard kit 79 $0


840H001 Double acting auxiliary hydraulic circuit 30 $473

Dual Pattern Control (DPC) system - ISO to SAE - mechanical foot controlled proportional

auxiliary


(cab builds)


(canopy builds)


(Essential) category below. Select Options and/or Attachments from Section 3 or 4.


existing machines.



PRICE PAGES

F.O.B.



SALES WEIGHTU.S.

CODE ITEM (lbs.) (kgs.)LIST


840L007 Panolin Biodegradable Oil 7 $1,970

840H002 Bucket to Grab change over 0 $658


840J001 Front work lights (2 each - cab and canopy mounted) 10 $146

840J002 Beacon - Amber rotating - 12v 5 $213

840J003 Rear worklight (1 each - cab and canopy mounted) 3 $71

840L004 External mirror - cab mounted 2 $86

840L015 Yellow roof moulding 15 $1,070

840L009 Toolkit 2 $60

840L003 Travel alarm 0 $378

840L017 Battery isolator 0 $320


840M001 9" Standard duty - 1.08 cu. Ft capacity 90 $597





840M006 47" Ditching bucket - 4.20 cu. Ft capacity 190 $749


840M007 Mechanical quick hitch 185 $1,657

840M011 Pin set required to connect attachments to the quick hitch (840M007) 30 $104



** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH

JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS

AND REFER TO TECHWEB BULLETIN 3441.



JCB MIDI EXCAVATOR

8055





MACHINE PRICE LIST

in U.S. Dollars

8055 MIDI EXCAVATOR U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE Isuzu 2.2L (128 CID), interim Tier IV compliant 46 SAE net hp diesel engine, centrifugal dry type air cleaner.

Water separator, spin-on oil filter, thermostart assist, antifreeze protection to -35 degrees F.

TRANSMISSION Independent left and right track control. Hydraulic pumps drive integral track motors and gearbox.

Two speed travel 1.7 mph and 3.2 mph.

TRACKS Rubber (optional steel) grease adjusted. Under carriage rollers 5 per side. Track width 15.75".

Ground pressure 4.7 lb. per square inch. Ground clearance 13.0".

ELECTRICAL 12 volt, with 80 amp alternator, 410 CCA heavy duty battery. Waterproof wire harness connectors.

EXCAVATOR Max. dig depth with standard 6'3" dipper 12' 4". Servo controls, SAE and ISO patterns both

available on 8055 Midi Excavator with DPC - Dual Pattern Control system. Auxiliary circuit

provides 37 GPM for JCB hydraulic breakers and other approved attachments. Dozer control.



CAB Meets SAE TOPS/FOPS/FOGS requirements, left side entry Cab equipped with fabric suspension seat

and is adjustable forward and aft comes equipped with heater, wiper, front and side opening windows.

8055 MIDI is available as RTS with 1.5" minimal tailswing for operation in very tight, confining areas.

This design does not compromise serviceability or ergonomics of operator compartment.







All prices and specifications subject to change without notice page 2 of 5 8055 MIDI USD Price Page


PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 8550ASALES 8055 RTS

CODE ITEM CAB

8551 8055RTS Midi Base Machine ( 46 hp net, 4cyl. engine)

850A157 Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning

850B500 Rubber tracks 16" wide

850C103 DPC - Dual Pattern Control System - ISO to SAE - mechanical foot controlled proportional auxiliary

850D110 Suspension seat fabric


850F104 Standard dipper 74.8" (1900mm) dig depth 13' 1"

850G100 Standard dozer blade

850H501 Double acting hyd. circuit (suitable for jaw bucket or auger)

850J110 Cab front work lights

850J111 Cab rear work lights

850K521 FOGS Guard kit


Shipping Weight - Kgs. 5,026







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

8551 8055RTS Midi Base Machine ( 46 hp net, 4cyl. engine) 10,238 4,654 $60,878

OPERATOR'S AREA (E)

850A157 Cab TOPS/FOPS/FOGS certified, fully glazed, with heater, wiper and air conditioning 250 114 $4,457

UNDERCARRIAGE (E)

850B500 Rubber tracks 16" wide 210 95 $1,672

850B510 Steel tracks 16" wide 290 132 $2,230

850B532 Bridgestone Geogrip Rubber Tracks 16" wide 290 132 $7,161

CONTROLS (E)

850C103 50 23 $0

850C105 50 23 $1,671

SEATS (E)

850D110 Suspension seat fabric 8 4 $0


850E152 American operator handbook 0 0 $0

DIPPER (E)

850F104 Standard dipper 74.8" (1900mm) dig depth 13' 1" 0 0 $1,045

850F105 Short dipper 59" (1900mm) dig depth 11' 9" 0 0 $940

DOZER BLADE (E)

850G100 Standard dozer blade 275 125 $0


850H501 Double acting hyd. circuit (suitable for jaw bucket or auger) 30 14 $473

DPC - Dual Pattern Control System - ISO to SAE - mechanical foot controlled proportional auxiliary

DPC - Dual Pattern Control System - ISO to SAE - one joystick mounted electronic proportional

auxiliary (for cab with A/C)







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



850H509 Bucket to Grab changeover 5 2 $658

850M128 5 2 $373

850L527 Panolin biodegradable oil 5 2 $1,970


850J110 Cab front work lights 10 5 $146

850J111 Cab rear work lights 10 5 $122


850K521 FOGS Guard kit 25 11 $391

850L520 Exterior mirror (left hand) 5 2 $86

850L532 Toolkit 4 2 $109


EXCAVATOR & BUCKET OPTIONS

850M120 9" Standard duty - 1.05 cu Ft. capacity heaped 185 84 $909

850M121 12" Standard duty - 1.8 cu. Ft. capacity heaped 154 70 $1,036




850M125 47" Ditching Bucket - 5.5 cu. Ft. capacity heaped 325 147 $1,214


850M126 Mechanical Quick Hitch for dipper mounted attachments 185 84 $1,238

850M127 Pin set required to connect attachment to Quick Hitch 30 14 $123


Bucket pin conversion (45mm bush kit) allows pickup of 3CX backhoe loader bucket (derates

machine)







JCB MIDI EXCAVATOR

8065





MACHINE PRICE LIST

in U.S. Dollars


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE Isuzu 2.2L (132 CID), interim Tier IV compliant 51.1 SAE net hp (54.3). Isuzu diesel engine, centrifugal dry type

air cleaner. Water separator, spin-on oil filter, thermostart assist, antifreeze protection to -35 degrees F.

and protective guard.

TRANSMISSION Independent left and right track control. Hydraulic pumps drive integral track motors and gearbox.

Two speed travel 1.8 mph and 3.3 mph.

TRACKS Rubber (optional steel) grease adjusted. Under carriage rollers 5 per side. Track width 15.75".

Ground pressure 5.6 lb. per square inch. Ground clearance 13.0".


EXCAVATOR Max. dig depth with standard 6'3" dipper 13' 4". Servo controls, SAE and ISO patterns both

available on 8065 Midi Excavator with DPC - Dual Pattern Control system. Auxiliary circuit

provides 25 GPM for JCB hydraulic breakers and other approved attachments. Dozer control.

Boom swing left 60 degree, right 65 degree. Less excavator bucket. Double Acting


CAB (OPTIONAL) Meets SAE TOPS/FOPS/FOGS requirements, left side entry Cab equipped with fabric suspension seat

and is adjustable forward and aft comes equipped with heater, wiper, front and side opening windows.

8065 MIDI is available as RTS with 1.5" minimal tailswing for operation in very tight, confining areas.

This design does not compromise serviceability or ergonomics of operator compartment.









PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 8565ASALES 8065 RTS

CODE ITEM CAB

8565 8065RTS Midi Base Machine ( 51.1 hp net, Isuzu Diesel 4cyl. engine)


850B520 Rubber tracks 16" wide

850C160 DPC - Dual Pattern Control System - ISO to SAE - mechanical foot controlled proportional auxiliary

850D110 Suspension seat fabric



850G100 Standard dozer blade

850H516 Double acting hyd. circuit (suitable for jaw bucket or auger). Not compatable with 850C166

850J110 Cab front work lights

850J111 Cab rear work lights

850K521 FOGS Guard kit









PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

8565 8065RTS Midi Base Machine ( 51.1 hp net, Isuzu Diesel 4cyl. engine) 14,300 6,486 $71,115

OPERATOR'S AREA (E)


UNDERCARRIAGE (E)

850B520 Rubber tracks 16" wide 240 109 $1,709

850B530 Steel tracks 16" wide 290 132 $2,335


CONTROLS (E)

850C160 50 23 $0

850C162 50 23 $1,671

850C166 60 27 $4,238

SEATS (E)

850D110 Suspension seat fabric 8 4 $0



DIPPER (E)


DOZER BLADE (E)

850G100 Standard dozer blade 275 275 $0


850H516 Double acting hyd. circuit (suitable for jaw bucket or auger). Not compatable with 850C166 30 30 $737

DPC - Dual Pattern Control System - ISO to SAE - mechanical foot controlled proportional auxiliary

DPC - Dual Pattern Control System - ISO to SAE - one joystick mounted electronic proportional

auxiliary

DPC - Dual Pattern Control System - ISO to SAE - double acting and low flow pipework. One

joystick mounted electronic proportional auxiliary and one mechanical foot controlled auxiliary

(includes 850H516)







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



850L527 Panolin biodegradable oil 0 0 $1,970

850J110 Cab front work lights 10 5 $146

850J111 Cab rear work lights 10 5 $122


850K521 FOGS Guard kit 25 11 $391

850L520 Exterior mirror (left hand) 5 2 $86

850L532 Toolkit 4 2 $109


EXCAVATOR & BUCKET OPTIONS





850M204 18" Standard duty - 3.6 cu. ft. capacity heaped 250 114 $1,035


850M206 36" Standard bucket - 8.8 cu. Ft. capacity heaped 360 164 $1,351

850M207 60" Grading Bucket - 7.7 cu. Ft. capacity heaped 325 148 $1,140


850M111 Mechanical Quick Hitch for dipper mounted attachments (pin set included) 220 100 $1,710

850M113 Pivot Pins Kit for use with Quick Hitch 2 1 $111








JCB HYDRAULIC EXCAVATOR

8085





MACHINE PRICE LIST

in U.S. Dollars

8085 HYDRAULIC EXCAVATOR U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE 57.7 SAE net (59.6 gross) hp, Interim Tier IV compliant Isuzu Diesel engine, centrifugal dry type

air cleaner. Water separator, spin-on oil filter, thermostart assist, antifreeze protection to -35 degrees

F. and protective fan guard.

HYDRAULICS One variable displacement axial-type pump yields 45 gpm. Independent left and right track

control. Hydraulic pumps drive integral track motors and gearbox. Two speed travel 2.3 mph

and 2.6 mph.

TRACKS Rubber (optional steel) grease adjusted. Under carriage provides (1) upper and (5) lower rollers per

side. Track width 18" inches. Ground pressure 5.97 lb. per square inch. Ground clearance 14".


Advanced Management System (AMS) provides extra control, fuel efficiency and diagnostics at the

operator's fingertips. AMS provides three digging modes (standard, light and heavy), auto-idle

function with manual override, and a programmable intermittent windshield wiper/washer.

EXCAVATOR Max. dig depth with standard 79" dipper 13' 10". Servo controls, SAE and ISO patterns both

available on 8080 Midi Excavator with DPC - Dual Pattern Control system.

Dozer control. Single Acting Hydraulics fitted as Standard.

OPERATORS AREA Meets SAE TOPS/FOPS/FOGS requirements, left side entry. Fabric suspension operators seat,

adjustable forward and aft. Swing lock pin and lockable tool box. Excavator servo controls, with safety

interlock. Hand operated track levers with foot pedals fitted as standard. Instrument panel contains:

ignition switch, fuses, auxiliary switches, engine warning indicators and fuel gauge. Foot pedal for

swing. Joystick buttons control boom auxiliary circuit. Comes equipped with Airconditioning, heater,

wiper, and front and side opening windows. 8085 MIDI has a "ZERO TAILSWING DESIGN", in which the

rear of the machine (counterweight) does not extend beyond the width of the tracks.

OPERATING WEIGHT Equipped with standard boom dipper and 18" rubber tracks and bucket. Aprx. Operating Weight is 17,634 lbs.






DEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)

MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO &

OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS

DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.



PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 8585ASALES 8080

CODE ITEM CAB

8586 8085 Midi Base Machine ( 57.6 hp net, Isuzu Diesel 4cyl. engine)


850B550 Rubber tracks 18" wide (450 mm)

850C308 DPC - Dual Pattern Control System - ISO to SAE - mechanical proportional with foot controlled auxiliary

850D306 Cloth mechanical suspension seat



850G303 Standard dozer blade, for use with 18" wide tracks (450mm)

850H605 Single to Double acting pipework for 9 spool valve block

850K600 FOGS Guard kit 1




Select the following machine PACKAGE BUILD code and OPTIONS and/or ATTACHMENTS as required from Section 3 and 4.

Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a

machine using the Custom Build, Attachments & Options Sections following.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

8586 8085 Midi Base Machine ( 57.6 hp net, Isuzu Diesel 4cyl. engine) 11,768 5,349 $87,772

OPERATOR'S AREA (E)


UNDERCARRIAGE (E)

850B550 Rubber tracks 18" wide (450 mm) 240 109 $2,990

850B551 Steel tracks 18" wide (450 mm) 290 132 $3,251

850B552 Steel tracks 24" wide (600 mm) 325 148 $3,900


CONTROLS (E)

850C308 50 23 $587

850C309 50 23 $1,671

850C310 0 0 $4,238

850C312 0 0 $5,411

SEATS (E)

850D306 Cloth mechanical suspension seat 8 4 $0

850D308 Cloth high back, heated, air suspension seat 0 0 $1,078



850E218 French operator handbook 0 0 $0

DIPPER (E)


DOZER BLADE (E)

850G303 Standard dozer blade, for use with 18" wide tracks (450mm) 300 136 $0

850G304 Dozer blade, for use with 24" wide tracks (600mm) 350 159 $0


850H605 Single to Double acting pipework for 9 spool valve block 81 37 $587

DPC - Dual Pattern Control System - ISO to SAE with joystick mounted electronic proportional

auxiliary

DPC - Dual Pattern Control System - ISO to SAE - with joystick mounted electronic proportional

auxiliary controls and one mechanical proportional foot control. Includes 850H605 double acting and

low flow pipework

DPC - Dual Pattern Control System - ISO to SAE - twin joystick mounted electronic proportional

auxiliary controls. Includes 850H605 double acting and low flow pipework

DPC - Dual Pattern Control System - ISO to SAE - mechanical proportional with foot controlled

auxiliary







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



850H606 Bucket to Grab changeover 0 0 $716

850L611 Hydraulic biodegradable oil 0 0 $1,970



850K600 FOGS Guard kit 1 25 11 $910

850K601 FOGS Guard kit 2 (Heavy Duty) 25 11 $1,107

850K603 Fan Guard Kit 3 1 $271

850L622 Headrest 5 2 $78

850L623 Refuelling Pump 8 4 $717

850L607 Toolkit 10 5 $71

850J536 Battery isolator 0 0 $356


EXCAVATOR & BUCKET OPTIONS (SAME AS 8065 EXCAVATOR BUCKETS)





850M204 18" Standard duty - 3.6 cu. ft. capacity heaped 250 114 $1,035


850M206 36" Standard bucket - 8.8 cu. Ft. capacity heaped 360 164 $1,351

850M207 60" Grading Bucket - 7.7 cu. Ft. capacity heaped 325 148 $1,140




850M211 Pivot Pins Kit for use with Quick Hitch 2 1 $111






*SEE DEALER FIT SECTION FOR ALL OTHER AVAILABLE ATTACHMENTS FOR 8080/8085


EXCAVATOR


JS145


MACHINE PRICE LIST

in U.S. Dollars



EFFECTIVE: July 1, 2013

JS145 HYDRAULIC EXCAVATOR U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GAEFFECTIVE: July 1, 2013

STANDARD EQUIPMENT

ENGINE JCB Ecomax 444, 109 HP at 2,050 RPM. Four-cylinder water cooled common rail direct injection

diesel engine. Low emission engine, EPA Tier 4 interim compliant. Dual element air cleaner.

HYDRAULICS Variable flow load sensing system with on demand and servo operated multi function open center

control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 70.7

GPM. Servo pump flow: 5.5 GPM.

OPERATOR'S AREA Air conditioned cab, noise and vibration isolated by six hydraulically damped resilient mountings.

Opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully

adjustable suspension seat with seatbelt, headrest, armrests, and backrest recline.

Cigarette lighter and ashtray. Auto AMS Control System

CONTROLS Excavator controls are ISO pattern, servo operated, with in cab change over switch to SAE. Tracks

are individually operated by foot pedal or hand lever. Speed selection via joystick operated switch.

Control isolation by gate lock lever at cab entrance and a console mounted switch.

UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No reinforcing required for

hammer operations. Boom: 15' 5" (4.7m). Dippers: 8' 2" (2.5m), 9' 10" (3.0m).


UNDERCARRIAGE The undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage

center cover, engine undercover and travel drive motor, cover and shields. Twin top and seven

bottom rollers are heat-treated, sealed and lubricated. Track idler is sealed and lubricated and

incorporates spring cushion recoil.

TRACK DRIVE Full hydrostatic, 3 speed, driven by two axial piston motors. Motors are guarded in undercarriage

frame for protection from debris. Final drives are planetary reduction type with bolt on sprockets.

Maximum track speed is 3.0 MPH, low speed is 1.4 MPH. Parking brake is disc type, spring applied,

hydraulic release.

ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 55 amp output alternator

with 12 volt in-cab supply.

OPERATING WEIGHT Equipped w/standard boom, dipper, 24" track shoes and excavator bucket: aprx. 31,914 lbs.







MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO

& OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR

PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.

All prices and specifications subject to change without notice page 2 of 5 JS145 USA Price Page


PRICE PAGES

F.O.B.


SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILDS

PACKAGE BUILD CODE: 9037A 9037BSALES JS145 JS145

CODE ITEM Monoboom Monoboom

9421 Model JS145 Primary Build Tier Satge 3B / 4i

900A112 Long Undercarriage. Overall length: 11'9"

900B521 24", 3 bar - 44 link tracks

900C261 Monoboom with 8' 2" (2.5 m) dipper. No HBCV


900D396 Tipping Link with lifting shackle

900K261 Hammer and Auxiliary Combined for 8' 2" (2.5 m) dipper


900E495 American Manual pack

EFFECTIVE: July 1, 2013 Shipping Weight - Lbs. 32,143 32,293



ATTACHMENTS FOR PACKAGE BUILD:

SALES U.S.

CODE LIST

EXCAVATOR BUCKETS (E)

HEAVY DUTY PLATE LIP

900XB06 24" Wide, 0.57 cu.yd. $4,023

900XB07 30" Wide, 0.73 cu.yd. $4,529

900XB08 36" Wide, 0.89 cu.yd. $4,972

900XB09 42" Wide, 1.048 cu.yd. $5,302

900XB05 48" Wide,1.2 cu.yd. $5,554

DITCHING

900XB11 60" Wide, 0.75 cu.yd. Ditching bucket $5,224

Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at the

bottom of this sheet. Package build configurations cannot normally be changed. If a Package Build does not meet your

requirements please order a machine using the Custom Build, Attachments & Options Sections following.



PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

BASE UNIT (E)

9421 Model JS145 Primary Build Tier Satge 3B / 4i $145,545

UNDERCARRIAGE (E)

900A112 Long Undercarriage. Overall length: 11'9" In Base

TRACK PADS (E)

900B521 24", 3 bar - 44 link tracks $2,856

900B522 28", 3 bar - 44 link tracks $3,529

900B523 32", 3 bar -44 link tracks $3,961

EFFECTIVE: July 1, 201324", 3 bar - 44 link steel tracks with bolt-on rubber pads (extended lead time) $11,809

MONO BOOM AND DIPPERS (E) Includes brackets for all attachment pipework

900C261 Monoboom with 8' 2" (2.5 m) dipper. No HBCV $1,012


TIPPING LINK (E)

900D396 Tipping Link with lifting shackle $459

MANUAL PACK (E)

900E495 American Manual pack In Base







PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

HYDRAULIC ATTACHMENT PIPEWORK NEW FACTORY BUILT ORDERS ONLY

900K261 Hammer and Auxiliary Combined for 8' 2" (2.5 m) dipper In Base


NOTE: For additional factory installed hydraulic pipework options call JCB Product Marketing.

Shut-off ball valve for hammer and auxiliary pipework available through JCB Parts Dept.

OPTIONS NEW FACTORY BUILT ORDERS ONLY

900S030 Additional work lights $537

900S040 Rotating Beacon $223

900S001 Fire Extinguisher $333

900R010 Heated Air Suspension Seat $529

900R030 Lower Windshield Wiper $440

900X040 Electric re-fueling pump $645

EFFECTIVE: July 1, 2013Central track guide $832

900S010 Vandal Cover Kit $3,079

900X232 Quickhitch Installation Kit $1,276

900X280 Fuel Cooler (Recommended for ambient environments over 104 deg. F) $246

900R001 AM/FM Radio $163

900S060 Rear View Camera $2,329

900S020 FOPS level 2 Guard - Front Windshield and Roof $6,488

900S025 Mesh screen guard for front windshield $1,724

900X802 HP32 Hydraulic oil - For cold climate operation $0

900X803 HP68 Hydraulic oil - For hot climate operation $0

900X890 Turbo 2 Pre-cleaner $1,716


SALES U.S.

CODE ITEM LIST

EXCAVATOR BUCKETS


900XB06 24" Wide, 0.57 cu.yd. $4,023

900XB07 30" Wide, 0.73 cu.yd. $4,529

900XB08 36" Wide, 0.89 cu.yd. $4,972

900XB09 42" Wide, 1.048 cu.yd. $5,302

900XB05 48" Wide,1.2 cu.yd. $5,554

DITCHING






JS145 WITH BLADE


MACHINE PRICE LIST

in U.S. Dollars



EFFECTIVE: May 1, 2013

JS145 WITH BLADE HYDRAULIC EXCAVATOR

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GA EFFECTIVE: May 1, 2013

STANDARD EQUIPMENT

ENGINE JCB Ecomax 444, 109 HP at 2,050 RPM. Four-cylinder water cooled common rail direct injection

diesel engine. Low emission engine, EPA Tier 4 interim compliant. Dual element air cleaner.


control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 70.7



Opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully

adjustable suspension seat with seatbelt, headrest, armrests, and backrest recline.

Cigarette lighter and ashtray. Auto AMS Control System






UNDERCARRIAGE The undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage

center cover, engine undercover and travel drive motor, cover and shields. Twin top and seven






hydraulic release.




SECTIONS ARE ORGANIZED AS FOLLOWS: Section 1 - PACKAGE BUILDS Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS

Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS DEALER FIT - EXCAVATORS (LISTED SEPARATELY FOR ALL EXCAVATORS)

MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES.

CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN

3441.

All prices and specifications subject to change without notice page 2 of 5 JS145 BLADE USA Price Page


U.S. DOLLAR

PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 9038A 9038BSALES JS145/Blade JS145/Blade

CODE ITEM Monoboom Monoboom

9422 Model JS145 with Blade Primary Build Stage 3B / Tier 4i

900A113 Dozer Undercarriage

900B526 24", 3 bar - 44 link tracks











SALES U.S.

CODE LIST



900XB06 24" Wide, 0.57 cu.yd. $4,023

900XB07 30" Wide, 0.73 cu.yd. $4,529

900XB08 36" Wide, 0.89 cu.yd. $4,972

900XB09 42" Wide, 1.048 cu.yd. $5,302

900XB05 48" Wide,1.2 cu.yd. $5,554

DITCHING


Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at

the bottom of this sheet. Package build configurations cannot normally be changed. If a Package Build does not meet

your requirements please order a machine using the Custom Build, Attachments & Options Sections following.



U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

BASE UNIT (E)

9422 Model JS145 with Blade Primary Build Stage 3B / Tier 4i $163,378

UNDERCARRIAGE (E)

900A113 Dozer Undercarriage In Base

TRACK PADS (E)

900B526 24", 3 bar - 44 link tracks $2,857

900B527 28", 3 bar - 44 link tracks $3,528

900B593 24", 3 bar - 44 link steel tracks with bolt-on rubber pads (extended lead time) $11,809




TIPPING LINK (E)


MANUAL PACK (E)



code from each E (Essential) category below. Select Attachments and/or Options from Section 3 or 4.





U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST













900X513 Central track guide $832



900X280 Fuel Cooler (Recommended for ambient environments over 104 deg. F) $246









SALES U.S.

CODE ITEM LIST

EXCAVATOR BUCKETS


900XB06 24" Wide, 0.57 cu.yd. $4,023

900XB07 30" Wide, 0.73 cu.yd. $4,529

900XB08 36" Wide, 0.89 cu.yd. $4,972

900XB09 42" Wide, 1.048 cu.yd. $5,302

900XB05 48" Wide,1.2 cu.yd. $5,554

DITCHING






JS160


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.

SAVANNAH, GAEFFECTIVE: May 1, 2013

STANDARD EQUIPMENT

ENGINE JCB Dieselmax 4x4x4, 130 net HP at 2200 RPM, Tier III. Four-cylinder water cooled direct injection

diesel with glow plugs for cold starting. Low emission engine designed to comply with US EPA

emission standard. Dual element air cleaner. Combined single face radiator and hydraulic oil

cooler.


control. Independent servo gear pump. Two main axial piston pumps yield combined flow of 86


OPERATOR'S AREA Climate controlled, noise and vibration isolated by six hydraulically damped resilient mountings

Full opening door window. Fan forced fresh air ventilation with defogger and washer/wiper. Fully

adjustable, high back suspension seat with seatbelt, headrest, armrests, and backrest recline.

Cigarette lighter and ashtray.





hammer operations. Boom: 16' 11" (5.15m). Dippers: 7' 4" (2.25m), 8' 10" (2.7m), 10' 0" (3.05m).

UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage

center cover, engine undercover and travel drive motor, cover and shields. Two top and seven






hydraulic release.














U.S. DOLLAR

PRICE PAGES

F.O.B.




CODE ITEM 8' 10" DIPPER 10' DIPPER

9432 Model JS160 NLC Primary Build Tier 4i

900A477 Narrow long Undercarriage. Use with primary build 9432

900B531 24" (600mm), 3 bar - 43 link chain

900C120 Monoboom with 8' 10" (2.7 m) dipper

900C121 Monoboom with 10' (3.05 m) dipper


900K054 Hammer and Auxiliary Combined for 8' 10" (2.7m) dipper

900K055 Hammer and Auxiliary Combined for 10' (3.05m) dipper






SALES U.S.

CODE LIST

EXCAVATOR BUCKETS


900XB18 24" Wide, 0.678 cu.yd. $3,941

900XB19 30" Wide, 0.847 cu.yd. $4,445

900XB20 36" Wide, 1.017 cu.yd. $4,981

900XB21 42" Wide, 1.186 cu.yd. $5,364

900XB17 48" Wide, 1.36 cu.yd. $5,720

DITCHING

900XB25 60" Wide 1.283 cu.yd. $5,223

JS160 HYDRAULIC EXCAVATOR

Select one of the following machine PACKAGE BUILD codes and ATTACHMENT(S) if required from the section at

the bottom of this sheet. Package Build configurations cannot normally be changed. If a Package Build does not meet

your requirements please order a machine using the Custom Build, Attachments & Options Sections following.


U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

BASE UNIT (E)

9432 Model JS160 NLC Primary Build Tier 4i $160,855

9431 Model JS160 LC Primary Build Tier 4i $160,855

UNDERCARRIAGE (E)

900A476 Long Undercarriage. Use with primary build 9431 In Base

900A477 Narrow long Undercarriage. Use with primary build 9432 In Base

TRACK PADS (E)

900B531 24" (600mm), 3 bar - 43 link chain $2,799


900B533 32" (800mm) 3 bar - 43 link chain. *Only available on LC Primary Build* $3,885


900C120 Monoboom with 8' 10" (2.7 m) dipper $993

900C121 Monoboom with 10' (3.05 m) dipper $993

TIPPING LINK (E)


MANUAL PACK (E)








U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST


900K054 Hammer and Auxiliary Combined for 8' 10" (2.7m) dipper In Base

900K055 Hammer and Auxiliary Combined for 10' (3.05m) dipper In Base







900X055 Heated Air Suspension Seat $529


900X532 Twin Track Guides $1,574











SALES U.S.

CODE ITEM LIST

EXCAVATOR BUCKETS


900XB18 24" Wide, 0.678 cu.yd. $3,941

900XB19 30" Wide, 0.847 cu.yd. $4,445

900XB20 36" Wide, 1.017 cu.yd. $4,981

900XB21 42" Wide, 1.186 cu.yd. $5,364

900XB17 48" Wide, 1.36 cu.yd. $5,720

DITCHING

900XB25 60" Wide 1.283 cu.yd. $5,223





JS190


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT \

ENGINE JCB 160 Net HP at 1800 RPM, Tier4i. Four-cylinder water cooled direct injection diesel

with glow plugs for cold starting. Low emission engine designed to comply with US EPA Tier 4i

emission standard. Dual element air cleaner. Combined single face radiator and hydraulic oil cooler.


control. Two variable displacement axial piston pumps yield combined flow of 84 GPM.

Independent servo gear pump delivers 4.6 GPM.


and lower windows. Full opening door window. Fan forced fresh air ventilation with defogger and

Fully adjustable, high back suspension seat with seatbelt, headrest, armrests, and backrest recline







UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X-frame type with undercarriage

center cover, engine undercover and travel drive motor, cover and shields. Two top and seven


incorporates spring cushion recoil. Two track guides per side




hydraulic release.











OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR



U.S. DOLLAR

PRICE PAGES

F.O.B.




CODE ITEM 8' 10" DIPPER 10' DIPPER

9452 JS190NLC MONOBOOM Stage 3B/Tier 4i

900A420 Narrow Long Undercarriage. Use with 9452

900B507 24" (600mm), 3 bar - 46 link chain, offset.


900C127 Monoboom with 10' (3.05 m) dipper


900K075 Hammer and Auxiliary Combined for 8' 10" (2.7m) dipper

900K076 Hammer and Auxiliary Combined for 10' (3.05m) dipper






SALES U.S.

CODE LIST

EXCAVATOR BUCKETS


900XB18 24" Wide, 0.678 cu.yd. $3,941

900XB19 30" Wide, 0.847 cu.yd. $4,445

900XB20 36" Wide, 1.017 cu.yd. $4,981

900XB21 42" Wide, 1.186 cu.yd. $5,364

900XB17 48" Wide, 1.36 cu.yd. $5,720

DITCHING

900XB25 60" Wide 1.283 cu.yd. $5,223



bottom of this sheet. Package Build configurations cannot normally be changed. If a Package Build does not meet your



U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

BASE UNIT (E)

9452 JS190NLC MONOBOOM Stage 3B/Tier 4i $176,736

9451 JS190LC MONOBOOM Stage 3B/Tier 4i $176,737

UNDERCARRIAGE (E)

900A418 Standard Undercarriage. Use with 9451 In Base

900A420 Narrow Long Undercarriage. Use with 9452 In Base

TRACK PADS (E)

900B507 24" (600mm), 3 bar - 46 link chain, offset. $2,799

900B542 24" (600mm), 3 bar - 46 link chain. $2,799




900C126 Monoboom with 8' 10" (2.7 m) dipper $993

900C127 Monoboom with 10' (3.05 m) dipper $1,029

TIPPING LINK (E)


MANUAL PACK (E)








U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST


900K075 Hammer and Auxiliary Combined for 8' 10" (2.7m) dipper In Base

900K076 Hammer and Auxiliary Combined for 10' (3.05m) dipper In Base

















900X048 Widecore Radiator - Note - this will reduce cooling performance $2,620




SALES U.S.

CODE ITEM LIST

EXCAVATOR BUCKETS


900XB18 24" Wide, 0.678 cu.yd. $3,941

900XB19 30" Wide, 0.847 cu.yd. $4,445

900XB20 36" Wide, 1.017 cu.yd. $4,981

900XB21 42" Wide, 1.186 cu.yd. $5,364

900XB17 48" Wide, 1.36 cu.yd. $5,720

DITCHING

900XB25 60" Wide 1.283 cu.yd. $5,223






JS220


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE Isuzu model 4HKIX, 172 Net HP at 2000 RPM, Tier III. Four-cylinder water cooled direct injection

diesel with glow plugs for cold starting. Low emission engine designed to comply with US EPA

Tier III emission standard. Dual element air cleaner. Combined single face radiator and

hydraulic oil cooler.





Full opening door window. Fan forced fresh air ventilation with defogger and washer/wiper.

Fully adjustable, high back suspension seat with seatbelt, headrest, armrests and backrest recline.





UPPER Monoboom with choice of dipper arms to suit dig depth requirements. No dipper reinforcing

required for hammer operations. Boom: 18' 8" (5.70m). Dipper Arms: 7' 10" (2.40m) or 9' 10"

(3.0m). Electric refueling pump is situated in tool box.

UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X-frame type with flush fitted, heavy duty

swing turret cover and heavy duty undercover. Two top and eight bottom rollers are sealed and lubricated.

Track idler is sealed and lubricated and incorporates spring cushion recoil.

TRACK DRIVE Full hydrostatic, 3 speed, driven by two axial piston motors. Flush fitted heavy duty track motor

guards. Final drives are planetary reduction type with bolt on sprockets. Maximum track speed is

3.4 MPH, low speed is 1.4 MPH. Parking brake is disc type, spring applied, hydraulic release.

ELECTRICAL 24 volt electrical system. 2 x 12 volt heavy duty batteries, 24 volt, 40 amp output alternator with

12 volt in-cab supply.









OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS

DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.


U.S. DOLLAR

PRICE PAGES

F.O.B.


SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD

PACKAGE BUILD CODE: 9107ASALES JS220

CODE Monoboom

9107 Model JS220 Long Undercarriage Primary Build

900A462 Long Undercarriage.

900B505 32" (800mm) 3 bar - 49 link chain


900D371 Tipping link with lifting shackle

900K006 Hammer and Auxiliary Combined Pipework for 9' 10" (3.0m) dipper






SALES U.S.

CODE LIST

EXCAVATOR BUCKETS


900XB33 24" Wide, 0.787 cu.yd. $5,429

900XB34 30" Wide, 0.984 cu.yd. $5,994

900XB35 36" Wide, 1.180 cu.yd. $6,286

900XB36 42" Wide, 1.377 cu.yd. $6,679

900XB37 48" Wide, 1.574 cu.yd. $7,169

900XB38 54" Wide, 1.771 cu.yd. $7,735

DITCHING

900XB47 66" Wide, 1.417 cu.yd. $6,348

ITEM






U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES U.S.

CODE LIST

BASE MACHINE (E)

9107 Model JS220 Long Undercarriage Primary Build $181,372

UNDERCARRIAGE (E)

900A462 Long Undercarriage. In Base

TRACK PADS (E)


900B505 32" (800mm) 3 bar - 49 link chain $5,862



900C011 Monoboom with 7' 10" (2.4 m) dipper $1,029


TIPPING LINK (E)

900D371 Tipping link with lifting shackle $451

MANUAL PACK (E)


ITEM







U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES U.S.

CODE LIST


900K005 Hammer and Auxiliary Combined Pipework for 7' 10" (2.4 m) Dipper In Base

900K006 Hammer and Auxiliary Combined Pipework for 9' 10" (3.0m) dipper In Base









900P001 Fuel Cooler (Recommended for ambient environments over 104 deg. F $583

900M200 Quickhitch Installation Kit $1,314



900P120 Widecore Radiator - Note - this will reduce cooling performance $2,356


900V001 HP32 Hydraulic oil - For cold climate operation $0

900V002 HP68 Hydraulic oil - For hot climate operation $0


900X236 Hammer Pipework Shut-off Valves - 7' 10" dipper $639

900X235 Hammer Pipework Shut-off Valves - 9' 10" dipper $670


SALES U.S.

CODE LIST

EXCAVATOR BUCKETS


900XB33 24" Wide, 0.787 cu.yd. $5,429

900XB34 30" Wide, 0.984 cu.yd. $5,994

900XB35 36" Wide, 1.180 cu.yd. $6,286

900XB36 42" Wide, 1.377 cu.yd. $6,679

900XB37 48" Wide, 1.574 cu.yd. $7,169

900XB38 54" Wide, 1.771 cu.yd. $7,735

DITCHING

900XB47 66" Wide, 1.417 cu.yd. $6,348

ITEM

ITEM






JS260


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE Isuzu model 4HKIX, 197 gross HP at 2000 RPM, Tier 4i. Four-cylinder water cooled direct injection

diesel w/glow plugs for cold starting. Low emission engine designed to comply with US EPA Tier 4i

emission standard. Dual element air cleaner. Combined single face radiator and hydraulic oil cooler.





Full opening door window. Fan forced fresh air ventilation, with defogger and washer/wiper

Fully adjustable suspension seat with seatbelt, headrest, armrests, and backrest recline.






required for hammer operations. Boom: 19' 2" (5.85m). Dippers: 6' 6" (2.0 m) 8' 0" (2.44m), 10' 2"

(3.09m), 11' 7" (3.53m). Electric refueling pump is situated in tool box.

UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X frame type with undercarriage

center cover, engine undercover, and travel drive motor shields. Two top and 9 bottom rollers are

heat-treated, sealed, and lubricated. Track idler is sealed and lubricated and incorporates spring

cushion recoil.




hydraulic release.



OPERATING WEIGHT Equipped w/standard boom, dipper, 32" track shoes and excavator bucket: 59,000 lb.












PRICE PAGES

F.O.B.




SALES JS260

CODE Monoboom

9225

900A472

900B008 32" (800mm), 3 bar track plates - 51 link chain








SALES U.S.

CODE LIST



900XB54 24" Wide, 0.902 cu.yd. $6,989

900XB55 30" Wide, 1.128 cu.yd. $7,865

900XB56 36" Wide, 1.354 cu.yd. $8,255

900XB57 42" Wide, 1.579 cu.yd. $9,099

900XB58 48" Wide, 1.805 cu.yd. $9,592

900XB59 54" Wide, 2.03 cu.yd. $10,219

DITCHING

900XB68 66" Wide, 1.417 cu.yd. $6,908

ITEM

Model JS260 Primary Build Tier 4i

Long Undercarriage






PRICE PAGES

F.O.B.



SALES U.S.

CODE LIST

BASE MACHINE (E)

9225 Model JS260 Primary Build Tier 4i $234,272

UNDERCARRIAGE (E)

900A472 Long Undercarriage In Base

TRACK PADS (E)

900B005 28" (700mm), 3 bar track plates- 51 link chain $4,975

900B008 32" (800mm), 3 bar track plates - 51 link chain $5,862

900B010 36" (900mm), 3 bar track plates - 51 link chain $7,972




TIPPING LINK (E)


MANUAL PACK (E)


ITEM







PRICE PAGES

F.O.B.



SALES U.S.

CODE LIST


900K156 Hammer pipework for 10' 2" (3.09 m) dipper $5,762

900K159 Hammer and Auxiliary pipework for 10' 2" (3.09m) dipper $9,668

900K736 Hammer and Auxiliary and Low flow pipework (7-11 gpm) for 10' 2" (3.09 m) dipper $11,005












900P015 Turbo 2 Pre-cleaner $2,089





SALES U.S.

CODE LIST

EXCAVATOR BUCKETS


900XB54 24" Wide, 0.902 cu.yd. $6,989

900XB55 30" Wide, 1.128 cu.yd. $7,865

900XB56 36" Wide, 1.354 cu.yd. $8,255

900XB57 42" Wide, 1.579 cu.yd. $9,099

900XB58 48" Wide, 1.805 cu.yd. $9,592

900XB59 54" Wide, 2.03 cu.yd. $10,219

DITCHING

900XB68 66" Wide, 1.417 cu.yd. $6,908

ITEM

ITEM





JS330


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE Isuzu model AH-6HKIX, 282 Gross HP at 2000 RPM, Tier 4i. Six-cylinder water cooled common rail direct

injection diesel w/glow plugs for cold starting. Low emission engine designed to comply with US EPA

Tier 4i emission standard. Dual element air cleaner. Heavy duty cooling via large capacity engine

radiator with anti-block fin design.



GPM. Servo pump flow: 8 GPM.


Full opening door window. Fan forced fresh air ventilation, with defogger and washer/wiper.

Fully adjustable suspension seat with seatbelt, headrest, armrests and backrest recline.

Cigarette lighter.





required for hammer operations. Boom: 21'2" (6.45m). Dippers: 7' 3" (2.21m) 8' 7" (2.63m), 10' 7"


UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X frame type with undercarriage center

cover, engine undercover, and travel drive motor shields. Two top and nine bottom rollers are heat-

treated, sealed, and lubricated. Track idler is sealed, lubricated and incorporates spring cushion recoil.



Maximum track speed is 3.0 MPH, low speed is 1.5 MPH. Parking brake is disc type, spring

applied, hydraulic release.










MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND

REFER TO TECHWEB BULLETIN 3441.



PRICE PAGES

F.O.B.




CODE Monoboom

9770 Model JS330 Primary Build 4i

900A800 Long Undercarriage

900B802 32" (800mm) 3 bar - 50 link chain








SALES U.S.

CODE LIST



900XB75 30" Width, 1.258 cu.yd. $11,182

900XB76 36" Width, 1.537 cu.yd. $12,481

900XB77 42" Width, 1.816 cu.yd. $13,473

900XB78 48" Width, 2.096 cu.yd. $14,217

900XB79 54" Width, 2.375 cu.yd. $15,057

900XB80 60" Width, 2.655 cu.yd. $15,856

ITEM






PRICE PAGES

F.O.B.



SALES U.S.

CODE LIST

BASE MACHINE (E)

9770 Model JS330 Primary Build 4i $296,546

UNDERCARRIAGE (E)


TRACK PADS (E)


900B802 32" (800mm) 3 bar - 50 link chain $6,437

900B803 36" (900mm), 3 bar -50 link chain $9,663





TIPPING LINK (E)


MANUAL PACK (E)


ITEM







PRICE PAGES

F.O.B.



SALES U.S.

CODE LIST




900K866 Hammer / Auxiliary merged pump pipework for 8' 7" (2.63 m) dipper $12,185











900X560 Additional Reinforcement Plates for 8' 7" dipper (Heavy Duty Applications) $1,385

900X571 Additional Reinforcement Plates for 10' 7" dipper (Heavy Duty Applications) $1,437



900X208 FOPS level 2 Guard - Front Windshield and Roof $6,488


SALES U.S.

CODE LIST

EXCAVATOR BUCKETS


900XB75 30" Width, 1.258 cu.yd. $11,182

900XB76 36" Width, 1.537 cu.yd. $12,481

900XB77 42" Width, 1.816 cu.yd. $13,473

900XB78 48" Width, 2.096 cu.yd. $14,217

900XB79 54" Width, 2.375 cu.yd. $15,057

900XB80 60" Width, 2.655 cu.yd. $15,856

ITEM

ITEM





JS360


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE Isuzu model AH-6HKIX, 282 Gross HP at 2000 RPM, Tier 4i. Six-cylinder water cooled common rail direct

injection diesel w/glow plugs for cold starting. Low emission engine designed to comply with US EPA

Tier 4i emission standard. Dual element air cleaner. Heavy duty cooling via large capacity engine

radiator with anti-block fin design.



GPM. Servo pump flow: 8 GPM.


windows. Full opening door window. Fan forced fresh air ventilation, with defogger and washer/wiper.

Fully adjustable suspension seat with seatbelt, headrest, armrests and backrest recline.

Cigarette lighter.





required for hammer operations. Boom: 21' 2" (6.45m). Dippers: 7' 3" (2.21m) 8' 8" (2.63m), 10' 7"


UNDERCARRIAGE The long undercarriage gives excellent stability, is a fully welded X frame type with undercarriage center

cover, engine undercover, and travel drive motor shields. Two top and nine bottom rollers are heat-

treated, sealed, and lubricated. Track idler is sealed, lubricated and incorporates spring cushion recoil.




hydraulic release.










MACHINE IS NO LONGER FITTED WITH RADIO STANDARD. A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS

IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND

REFER TO TECHWEB BULLETIN 3441.



PRICE PAGES

F.O.B.




CODE Monoboom

9781 Model JS360 Primary Build Tier 4i

900A006 Long Undercarriage

900B021 32" (800mm), 3 bar- 50 link chain


900D003 Tipping link with lifting shackle






SALES U.S.

CODE LIST



900XB75 30" Width, 1.258 cu.yd. $11,182

900XB76 36" Width, 1.537 cu.yd. $12,481

900XB77 42" Width, 1.816 cu.yd. $13,473

900XB78 48" Width, 2.096 cu.yd. $14,217

900XB79 54" Width, 2.375 cu.yd. $15,057

900XB80 60" Width, 2.655 cu.yd. $15,856

ITEM






PRICE PAGES

F.O.B.



SALES U.S.

CODE LIST

BASE MACHINE (E)

9781 Model JS360 Primary Build Tier 4i $340,654

UNDERCARRIAGE (E)


TRACK PADS (E)

900B020 28" (700mm), 3 bar- 50 link chain $4,052







TIPPING LINK (E)

900D003 Tipping link with lifting shackle $577

MANUAL PACK (E)


ITEM







PRICE PAGES

F.O.B.



SALES U.S.

CODE LIST


















900P041 Turbo 2 Pre-Cleaner $2,089



0 ATTACHMENTS - NEW FACTORY BUILT ORDERS $0


SALES U.S.

CODE LIST

EXCAVATOR BUCKETS


900XB75 30" Width, 1.258 cu.yd. $11,182

900XB76 36" Width, 1.537 cu.yd. $12,481

900XB77 42" Width, 1.816 cu.yd. $13,473

900XB78 48" Width, 2.096 cu.yd. $14,217

900XB79 54" Width, 2.375 cu.yd. $15,057

900XB80 60" Width, 2.655 cu.yd. $15,856

ITEM

ITEM




WHEEL LOADER

COMPACT WHEEL LOADER

406B


MACHINE PRICE LIST

in U.S. Dollars




406B WHEEL LOADER U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL Front and rear unitized mainframe coupled by heavy duty articulation point

Front and rear fenders. One piece rear engine cover, all keys alike

Articulation locking strut, counterweight mounted tow hitch with locking pin.

ENGINE 3.6 L (220 CID) Industrial 4 -cylinder air cooled direct injection with 62 gross/ 58 net HP

Tier III engine, dual element air cleaner, spin on filter, water separator, thermostart assist.

TRANSMISSION Hydrostatic transmission incorporating a speed inhibitor and modulation for smooth directional

changes featuring automatic braking effect for ease of operation and high and low operating range.

Direction change on joystick and switchable high/low range.

TIRES Several types available. See section 2

FRONT/REAR AXLE Standard front differential and limited slip rear axle.

Optional limited slip differentials in both axles for superior traction

BRAKES Inboard wet disc brakes on rear axle

Park brake in center casing of rear axle

ELECTRICS 12 volt, IP 67 water and dust resistant connectors with numerical coded wiring

80 amp alternator with heavy duty low maintenance battery rated at 870 CCA

Audible back up alarm, turn signals, and battery isolator

INSTRUMENTS Audible and visual engine and powertrain warning system monitoring engine oil pressure

engine coolant temperature, air filter condition, alternator charge, hand brake applied, transmission

oil temperature, oil filter blocked, turn indicators, hazard warning, head lamp main beam

CAB UNIT SAE certified ROPS/FOPS fully enclosed cab. Low line one piece windshield and side windows

Fully adjustable cloth suspension seat, retractable 2 inch seat belt, front windshield washer/ wiper

Loader control lockout mechanism. Operators manual

Canopy - Open frame with vinyl seat.

HYDRAULICS Single gear pump with 16 GPM flow. Single lever control for lift and tilt functions with direction control

switch. Priority steering valve for accurate handling and safety

LOADER Loader arms with general purpose bucket (see options, Section 3). Parallel fork lift with the use of JCB

pallet forks. One hydraulic circuit with diverter valve for use with hydraulic attachments.






DEALER FIT - LISTED SEPARATELY FOR ALL WHEEL LOADERS

All prices and specifications subject to change without notice page 2 of 6 406 USD Price Page


PRICE PAGES

F.O.B.



SALES PACKAGE BUILD CODE: 6614A 6614BCODE ITEM CANOPY CAB

6614 406B Compact WL Base Machine (58 hp net, 4 cyl engine)

406A605 Michelin 335/80 R18 XZSL

406A608 Dunlop 365/70 R18 SPT9

406B604 CAB - High spec with sliding door window

406B605 CANOPY - Four pillars, no glass

406C601 NO Heater - (for use with Canopy 406B605 only)

406C602 HEATER and AIR CONDITIONING (for use with 406B604 only)

406D600 12.5 mph Standard Front Differential and Limited Slip Rear Axles

406E600 3 Spool Servo Control (must use Servo Control if A/C fitted)

406E602 3 Spool Manual, Joystick Control (not compatible with 406C602)

406F606 Operators Handbook / Manual pack - ENGLISH

406G600 Quickhitch - JCB Hydraulic

406H702 G.P. Bucket 1.0 cu. yd - c/w Bolt-on Edge

406N607 Reverse Lights (Counter weight mounted) x2

406R601 Radio Installation Kit (excludes radio)

406R604 Full Instrumentation

406R606 Tilt and Slide Steering Column

406R620 In-Cab Quickhitch Isolator- SERVO controls only

406T609 Auxiliary relief valve 3 spool MANUAL control

406T611 Auxiliary relief valve 3 spool SERVO control





Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options

Sections following.

NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be

fitted to Package Builds. Notification will be given if an alternate tire is fitted.



PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)

6614 406B Compact WL Base Machine (58 hp net, 4 cyl engine) $39,244

MANUALS (E)

406F606 Operators Handbook / Manual pack - ENGLISH $0


406A605 Michelin 335/80 R18 XZSL $5,664

406A608 Dunlop 365/70 R18 SPT9 $4,571

406A603 Solid Deal 12.5 x 18 $2,612

OPERATORS AREA (E)

406B604 CAB - High spec with sliding door window $7,297

406B605 CANOPY - Four pillars, no glass $4,508

HEATER (E)

406C602 HEATER and AIR CONDITIONING (for use with 406B604 only) $2,411

406C600 HEATER (for use with 406B604 only) $755

406C601 NO Heater - (for use with Canopy 406B605 only) $0

AXLES (E)

406D600 12.5 mph Standard Front Differential and Limited Slip Rear Axles $9,842

406D601 12.5 mph Limited Slip Differential Front and Rear Axles $10,232

AUXILIARY HYDRAULICS (E)

406E602 3 Spool Manual, Joystick Control (not compatible with 406C602) $3,095

406E600 3 Spool Servo Control (must use Servo Control if A/C fitted) $4,034

406E601 4 Spool Servo Control (must use Servo Control if A/C fitted) $5,059

HYDRAULIC QUICKHITCH (E)

406G600 Quickhitch - JCB Hydraulic $1,904

406G601 No Quickhitch - Transport Linkage Only $1,194







PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST


406N605 Rotating Beacon $98

406N600 Worklights FRONT x 2 $98

406N607 Reverse Lights (Counter weight mounted) x2 $98

406N608 Worklights - REAR x 2 for machines equipped with cab heater only. $124

406N610 Worklights - REAR x 2 for machines equipped with Air Conditioning. $124

406R600 Fire Extinguisher (5.5lb capacity) $131

406R601 Radio Installation Kit (excludes radio) $100

406R604 Full Instrumentation $240

406R606 Tilt and Slide Steering Column $280

406R608 Air Suspension Seat $1,216

406R609 Mech. Suspension, vinyl, 3" seatbelt $269

406R610 Mech. Suspension, fabric, 3" seatbelt $269

406R613 Seat backrest extension (only available for mech. Suspension seat) $142

406R617 Face Level Fan for CANOPY only $224


406R614 In-Cab Quickhitch Isolator- MANUAL controls only $509

406R620 In-Cab Quickhitch Isolator- SERVO controls only $509

406R615 Smooth Ride - MANUAL controls only (for use with 406E602) $1,206

406R618 Smooth Ride - SERVO control only (for use with 406E600 or 406E601) $1,206

406R616 Creep Speed CAB w/Heater, NO AC build only $1,379

406R621 Creep Speed CANOPY build only $1,215

406R624 Creep Speed CAB with AC build only $1,379

406S606 Front Screen Guard $2,465

406T609 Auxiliary relief valve 3 spool MANUAL control $107

406T610 Auxiliary relief valve 4 spool MANUAL control $210

406T611 Auxiliary relief valve 3 spool SERVO control $107

406T612 Auxiliary relief valve 4 spool SERVO control $210

406T530 Bucket Level Indicator $115

406S708 Front Light Guards $204



406BWHEEL LOADER U.S. DOLLAR

PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

JCB QUICKHITCH LOADER BUCKETS

406H701 G.P. Bucket 1.0 cu. yd - c/w Teeth $2,988

406H702 G.P. Bucket 1.0 cu. yd - c/w Bolt-on Edge $3,104

406H706 Multipurpose bucket (6 in 1) 1.0 cu. Yd. c/w front & rear 74" toeplate $7,009

406H720 1.8 cu. Yd. Bucket - Light duty with Bolt-on Edge $3,778

OTHER QUICKHITCH ATTACHMENTS

406H710 47 in Forks and Fork Frame (53 in wide) $1,835

406S607 Adapter Frame 406 to 409 $3,350



COMPACT WHEEL LOADER

409B


MACHINE PRICE LIST

in U.S. Dollars




409B COMPACT WHEEL LOADER U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL Front and rear unitized mainframe modules coupled by an extreme service articulation joint.

Front & rear fenders. One piece rear engine cover, cab door and ignition keyed alike.

Articulation locking strut, counterweight mounted tow hitch with locking pin.

ENGINE 3.6 L (220 CID) Industrial 4-cylinder oil-cooled turbo charged with 75 gross/72 net HP, Tier III,

dual element air cleaner, spin-on filters, water separator, thermostart assist.

TRANSMISSION Hydrostatic transmission incorporating a speed inhibitor and modulation for smooth directional

changes featuring automatic braking effect for ease of operation and high and low operating range.

Direction change on joystick and switchable high/low range.

TIRES Several types available. See Section 2.

FRONT/REAR AXLES Standard front differential and rear limited slip axles, optional high speed 25mph standard front axle

or high speed limited slip differential 25mph axles. Optional front and rear limited slip differentials available

for superior traction.

BRAKES Inboard wet disc brakes on rear axle. Park brake in center casing of rear axle

ELECTRICS 12 volt, IP 67 water and dust resistant connectors with numerical coded wiring.

80 amp alternator with heavy duty low maintenance battery rated at 870 CCA.

Audible back-up alarm, turn signals and battery isolator.

INSTRUMENTS Audible and visual engine and powertrain warning system monitoring engine oil pressure,

engine coolant temperature, air filter condition, alternator charge, hand brake applied, transmission

oil temperature, oil filter blocked, turn indicators, hazard warning, head lamp main beam.

CAB UNIT SAE certified ROPS/FOPS fully enclosed cab. Low line one-piece windshields and side windows.

Fully adjustable cloth suspension seat, retractable 2 inch seat belt, front windshield washer/ wiper

Loader control lockout mechanism. Operators manual.

CANOPY - Open frame with vinyl seat

HYDRAULICS Single gear pump with 20 GPM (78 LPM) flow. Single servo control lever for lift and tilt functions with direction

control switch. Priority steering valve for accurate handling and safety.

LOADER Loader arm with a general purpose bucket (see Options, Section 3). Parallel fork lift with the use of JCB

pallet forks. One hydraulic circuit with diverter valve for use with hydraulic attachments.






DEALER FIT - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)



PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 6587A 6587BCab & AC Canopy

LSD F&R SD F & LS R

SALES Radial Tires Radial Tires

CODE ITEM Tilt Steering Tilt Steering

6587 409B Compact WL Base Machine (72 hp net, 4 cyl. Turbo Charged engine)

406A542 Goodyear 16.0/70-20 SGL

406B303 CAB - High spec with sliding door window

406B304 CANOPY - Four pillars, no glass

406C701 HEATER and AIR CONDITIONING (for use with 406B303 only)

406C702 NO Heater - Canopy 406B304 only

406D551 12.5 mph Limited Slip Differential Front and Rear Axles

406D550 12.5 mph Standard Front Differential and Limited Slip Rear Axles

406E530 3 Spool Servo Joystick Control (w/detented flow for attachments)

406F209 Operator's Handbook / Manual Pack - ENGLISH

406G508 Quickhitch - JCB Hydraulic Locking

406H794 G.P. Loader Bucket 1.3 cu. yd - with Bolt-on Edge 76.5 in wide

406N702 Worklights (2) - Front

406N706 Rotating Beacon

406R700 Full Instrumentation

406R702 Seat - Mech Suspension, Cloth, 3 in Seat Belt

406R703 Seat - Mech Suspension, Vinyl, 3 in Seat Belt

406R707 Radio Installation Kit - Cab machines only, excludes radio.

406R712 In-Cab Quickhitch Isolator

406R701 Tilt and Slide Steering Column

406T522 Auxiliary Relief Valve for 3 Spool controls (406E530)





Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options

Sections following.





PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)

6587 409B Compact WL Base Machine (72 hp net, 4 cyl. Turbo Charged engine) $60,947

See cover sheet for items included in base machine

MANUALS (E)

406F209 Operator's Handbook / Manual Pack - ENGLISH $0

TIRES INCLUDING RIMS (E)

406A542 Goodyear 16.0/70-20 SGL $4,222

406A546 Michelin 405/70 R20 XZSL $6,350

406A547 Michelin 400/70 R20 XMCL $5,956

OPERATORS AREA (E)

406B303 CAB - High spec with sliding door window $8,123

406B304 $5,334

CAB CONDITIONING SYSTEMS (E)

406C701 HEATER and AIR CONDITIONING (for use with 406B303 only) $2,515

406C700 HEATER for use with 406B303 only $880

406C702 NO Heater - Canopy 406B304 only $0

TRANSMISSION AND AXLES (E)

406D550 12.5 mph Standard Front Differential and Limited Slip Rear Axles $7,933

406D551 12.5 mph Limited Slip Differential Front and Rear Axles $8,534

406D552 25 mph (40kph) Standard Axles (includes full instrumentation R700) $11,629

406D553 25 mph (40kph) Limited Slip Differential Axles (includes full instrumentation R700) $12,230


406E530 3 Spool Servo Joystick Control (w/detented flow for attachments) $2,268

406E531 4 Spool Servo Joystick Control (w/detented flow for attachments) $3,649

HYDRAULIC QUICKHITCH (E)

406G508 Quickhitch - JCB Hydraulic Locking $2,256

406G509 No Quickhitch - Transport Linkage Only $1,930

CANOPY - Four pillars, no glass







PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST


406N706 Rotating Beacon $129

406N702 Worklights (2) - Front $122

406N703 Worklights (2) - Rear for CAB w/heater (NON AC build) $122

406N709 Worklights (2) - Rear for CAB machines with AC. $122

406R708 Fire Extinguisher $199

406R707 Radio Installation Kit - Cab machines only, excludes radio. $133

406R700 Full Instrumentation $280

406R701 Tilt and Slide Steering Column $549

406R702 Seat - Mech Suspension, Cloth, 3 in Seat Belt $316

406R703 Seat - Mech Suspension, Vinyl, 3 in Seat Belt $316

406R705 Seat backrest extension (only available for mech. Suspension seat) $215

406R706 Air Suspension Seat $1,439

406R709 Fan - Face Level for CAB only $175

406R710 Fan - Face Level for CANOPY only $175


406R712 In-Cab Quickhitch Isolator $724

406R713 Smooth Ride System - Loader Control $1,144

406T522 Auxiliary Relief Valve for 3 Spool controls (406E530) $120

406T523 Auxiliary Relief Valve for 4 Spool controls (406E531) $238

406R716 Creep Speed for cab, heater only builds $1,379

406R717 Creep Speed for canopy builds $1,215

406R718 Creep Speed for cab, heater and air conditioning builds $1,379

406S702 Front Screen Guard $2,465

406S708 Front Light Guards $204

406T527 Bucket Level Indicator $115

Select Optional Equipment as desired within limitations if indicated



PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

QUICKHITCH LOADER BUCKETS

406H793 General Purpose Loader Bucket 1.3 cu. yd - with Teeth. 76.5 in wide $2,971

406H794 G.P. Loader Bucket 1.3 cu. yd - with Bolt-on Edge 76.5 in wide $3,253

406H803 Multipurpose Loader Bucket (6 in 1) 1.2 cu. yd. Teeth (BOE on rear jaw) 76.5 in wide $7,145

406H810 Bucket - Light duty (1.8 cu yd.) with Bolt-on Edge $3,906

OTHER ATTACHMENTS



Note: Capacity for buckets is for heaped material and does not

include additional capacity with edges or teeth



JCB WHEEL LOADER

411 HT


MACHINE PRICE LIST

in U.S. Dollars




411 HT WHEEL LOADER U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic and

fuel tanks with convenient cleanout ports. Full fender coverage that accommodate all tire options.

assisted struts. Articulation locking strut for transporting.

ENGINE JCB Ecomax 4.4 L (269 CID) 4-cylinder turbo-charged engine, water-cooled, direct high pressure injection

with 108 gross HP TIER4i engine,cyclonic air pre-cleaner with scavenge system, single element airfilter,

spin-on filters, water separator, variable speed cooling fan, wide core radiators, single faced cooling pack, thermostart assist and antifreeze to -33 degrees. No serviceable after treatment of exhaust gas.

TRANSMISSION Fully automatic powershift transmission with torque converter. Four forward and three reverse gears

with a speed inhibitor and modulation for smooth directional changes. Twist grip for manual gear

selection with transmission kickdown button. Forward and reverse control switch on hydraulics

control lever. Selectable transmission disconnect on brake pedal and hydraulics control lever.

Transmission underbelly guard for added protection.


FRONT/REAR AXLES Torque proportioning differentials with outboard planetaries. Optional limited slip differentials available

for superior traction performance.

SERVICE BRAKES Oil immersed and inboard mounted multi-disc design. Dual circuit design with accumulator backup to

provide stopping ability in all conditions. Mechanical disc parking brake operating on the transmission

output shaft.EFFECTIVE: NOVEMBER 6, 2013


60 amp alternator with 2 heavy duty low maintenance batteries rated at 850 CCA. Battery isolator

switch located at cab steps. Electrical circuit test button. Back-up Alarm.

INSTRUMENTS Center mounted instrument panel, with analogue/digital display gauges (speedometer, fuel, coolant

temperature, transmission temperature, hydraulic temeprature) along with full colour LCD screen

including selectable machine and operator menus along with service diagnostic screens.

Parking brake "on" warning light.

CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 71 dB(a) internal noise level

(SAE J2105) Dual exterior side view heated mirrors, interior rear view mirror, headrest

and sun visor. Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest.

Heater/defroster, windshield wiper/washer, radio provision with speakers. Lighting package includes

two headlights, two front and two rear worklights, two tail lights, reverse light, turn signals and

cab mounted flashing beacon. Operator's manual. Roof mounted switch bank for accessory controls.

HYDRAULICS Double gear pump providing an efficient responsive distribution of power with 32.4 GPM.

Load sensing hydraulics. Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic

circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for

improved handling and safety and emergency steer back-up

LOADER Four cylinder geometry for high torque and capacity. Two lift and two tilt cylinders.

Return to dig and height kickout. Lift ram safety strut.

LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and

modernized fleet control.






DEALER FIT SECTION - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)

All prices and specifications subject to change without notice page 2 of 6 411 HT USA Price Page

411 HT WHEEL LOADER (TIER IlI) U.S. DOLLAR

PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 6306A 6306B411HT 411HT

Std Axles Lim. Slip

SALES Bias Tires Radial Tires

CODE ITEM A/C A/C

6650 411 HT Base machine (TIER 4 INTERIM EMISSIONS COMPLIANT)*

600A610 GOODYEAR SGL 15.5 X 25, 12 PLYWITH FENDERS TO SUIT

600A612 MICHELIN XHA 15.5 X 25WITH FENDERS TO SUIT

600B360 FULL CAB:, SLIDING / TINTEDGLASS, FABRIC SUSPENSION SEAT

600C391 FULL CAB HEATER

600D430 STANDARD AXLES, AUTOTRANSMISSION

600D431 LSD AXLES, AUTO TRANSMISSION

600E900 Std. Arms, One Aux. Hyd. Service, 3 spool

600F820 LANGUAGE PACK: NORTH AMERICAN

600J540 Quickhitch - JCB Hydraulic includes Couplings

EFFECTIVE: NOVEMBER 6, 2013GP Bucket - 1.8 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount

600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab)

600T562 Auxiliary Relief Valve for 3 spool (for hydraulic attachments)

600N398 Engine Block Heater, 110 Volt

600N395 Folding Beacon

600S434 Front Headlight Box Protection


Shipping Weight - Kgs 8,596 8,756


Select one of the following machine PACKAGE BUILD codes, which include an Attachment.







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

6650 411 HT Base machine (TIER 4 INTERIM EMISSIONS COMPLIANT)* 11,356 5,162 $102,741

MANUALS (E)

600F820 LANGUAGE PACK: NORTH AMERICAN 1 0 $0

600F826 Operators Handbook and Manual Pack, French 1 0 $0


600A610 GOODYEAR SGL 15.5 X 25, 12 PLYWITH FENDERS TO SUIT 1,128 513 $6,217

600A302 Goodyear HRL 15.5-25 12 ply, L3 1,208 549 $7,996

600A613 MICHELIN XTLA 15.5 X 25WITH FENDERS TO SUIT 1,375 625 $8,137

600A612 MICHELIN XHA 15.5 X 25WITH FENDERS TO SUIT 1,481 673 $8,920

OPERATORS AREA (E)

600B360 FULL CAB:, SLIDING / TINTEDGLASS, FABRIC SUSPENSION SEAT 1,320 600 $4,559

600B361 CANOPY CAB OPEN 600 273 $2,191


600C391 FULL CAB HEATER 45 20 $1,780

600C390 NO HEATER BUILD 1 0 $281

600C392 FULL HEATER & AIR CONDITIONING 85 39 $4,654

EFFECTIVE: NOVEMBER 6, 2013TRANSMISSION AND AXLES (E)

STANDARD AXLES, AUTOTRANSMISSION 2,950 1,341 $10,707

600D431 LSD AXLES, AUTO TRANSMISSION 2,950 1,341 $13,790

LOADER ARMS & AUXILIARY HYDRAULICS (E)

600E900 Std. Arms, One Aux. Hyd. Service, 3 spool 30 14 $1,641

600E902 STANDARD HEIGHT ARM, 3 SPOOLMULTI LEVER CONTROLS, // LIFT 60 27 $3,799

600E903 STANDARD HEIGHT ARM, 4 SPOOLMULTI LEVER CONTROLS, // LIFT 60 27 $3,394

600E905 60 27 $4,864

FOR PRICE AND AVAILABILITY.

STANDARD HEIGHT ARM, 4 SPOOL

PROPORTIONAL CONTROLS, // LIFT

* NOTE: FOR HIGH LIFT AND MULTI-LEVER OPTIONS CONTACT JCB PRODUCT MARKETING







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



600N364 Converter - Electric w/ Receptacle (24v to 12v in Cab) 1 0 $283

600R410 Sun Visor 1 0 $31

600R412 Fire Extinguisher 2 1 $258

600R362 Additional Worklights - cab mounted (provides a total of 2 Front/2 Rear) 8 4 $741

600R372 Carbon Filter - Cab Air Intake 0 0 $211

600R421 Seat - Air Suspension, Heated (if LH armrest is needed, order 600R375) 20 9 $1,177

MACHINE PROTECTION OPTIONS

600N393 Electrical Connectors - Epoxy Sealed 2 1 $963

600R363 Windshield Guard - Front & Side 71 32 $2,216

600S434 Front Headlight Box Protection 0 0 $142

600S431 Front Roadlight Guards 0 0 $1,518

600B362 0 0 $7,581

NOTE: For corrosion protection options, contact Product Marketing for sales special pricing.

NOTE: For corrosion protection options, contact Product Marketing for sales special pricing.OTHER MACHINE OPTIONS

600M339 Hydraulic Oil (Bio-degradable ) 0 0 $2,015

EFFECTIVE: NOVEMBER 6, 2013Reverse Smart Alarm (82-112dba, 5 dba above ambient) 0 0 $247

600N398 Engine Block Heater, 110 Volt 2 1 $243

600N395 Folding Beacon 0 0 $167

600T562 Auxiliary Relief Valve for 3 spool (for hydraulic attachments) 1 0 $439

600T563 Auxiliary Relief Valve for 3 & 4 spool (for hydraulic attachments) 2 1 $882

600T560 JCB Smooth Ride System (Load Suspension) 305 139 $4,444

WASTEMASTER FULL CAB: LOWER

GLASS REPLACED WITH METAL




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


HYDRAULIC QUICKHITCH (FOR USE WITH QUICKHITCH ATTACHMENTS)

600J540 Quickhitch - JCB Hydraulic includes Couplings 620 282 $3,619

600J541 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve 620 282 $4,628

JCB QUICKHITCH LOADER BUCKETS - Require 600J371 or 600J435 hydraulic quickhitch

Note: Capacity for buckets is for heaped material and does not include additional capacity with edges or teeth.

600J346 GP Bucket - 1.6 cu.yd. w/ Teeth - Quickhitch Mount 1,162 528 $5,750

600J347 GP Bucket - 1.6 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 1,219 554 $4,805



JCB DIRECT MOUNTED LOADER BUCKETS (NOT for use with Quickhitch)


600H343 GP Bucket - 1.6 cu.yd. w/ Teeth 1,183 538 $5,750

600H344 GP Bucket - 1.6 cu.yd. w/ Bolt-on Cutting Edge 1,241 564 $4,805

600H347 GP bucket - 1.8 cu.yd. w/ Bolt-on Cutting Edge 1,499 681 $5,590

OTHER ATTACHMENTS, QUICKHITCH

600J378 Fork Frame and Forks - ITA Class III 59" wide (48" x 4" x 2") 1,063 483 $6,054

EFFECTIVE: NOVEMBER 6, 2013Forks for ITA Carriages 580 264 $2,311

600WA14 Carriage - 72 inch w/ 48" x 5" x 2" Pin-on Floating Forks 1,000 455 $5,566

600WA79 Carriage - 72 inch w/ 48" x 5" x 2" Pin-on HI-BACK Floating Forks 1,045 475 $6,050

600WB06 Carriage - 72 inch w/ 60" x 5" x 2" Pin-on Floating Forks 1,110 505 $5,773

600WB07 Carriage - 72 inch w/ 60" x 5" x 2" Pin-on HI-BACK Floating Forks 1,155 525 $5,913

600WB33 Carriage - 74 inch w/ 48" Forks and SINGLE Top Clamp 1,627 740 $11,674

600WA69 Bucket - 6-in-1- 1.25 cu. yd. w/ Bolt-on Cutting Edge 2,150 977 $11,041

600WA70 Bucket - Scrap Grapple - 2 cu. yd. 2,250 1,023 $11,110

600WB36 Trash Clamp - 1.75 cu.yd. 1,850 841 $9,843

600WA15 Lifting Arm - 3-Stage 1,000 455 $3,945

600WA16 Blank Plate for JCB HT Quickhitch 353 160 $1,726



JCB WHEEL LOADER

417 HT


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted hydraulic

and fuel tanks with convenient cleanout ports. Front and rear fenders with coverage that

accommodate all tire options. One piece rear bonnet with gas assisted struts provides excellent

service acces to engine bay. Articulation locking strut for transporting.

ENGINE JCB Ecomax 4.4 L (269 CID) 4-cylinder turbo-charged engine, water-cooled, direct high pressure

125 gross HP (Tier 4i), cyclonic air pre-cleaner with scavenge system, single element airfilter,

spin-on filters, injection with water separator, variable speed cooling fan, wide core radiators, single

faced cooling pack, thermostart assist and antifreeze to -33 degrees. No serviceable after treatment of

exhaust gas.

TRANSMISSION Full powershift automatic transmission with torque converter. Four forward and three reverse gears




Transmission underbelly guard for added protection.


FRONT/REAR AXLES Torque proportioning differentials with outboard planetaries. Optional limited slip differentials available

for superior traction performance.

SERVICE BRAKES Oil immersed and inboard mounted multi-disc design. Dual circuit design with accumulator backup to


output shaft.


60 amp alternator with 2 heavy duty low maintenance batteries rated at 850 CCA. Battery isolator

located at cab steps. Electrical circuit test button. Back-up Alarm.

INSTRUMENTS Center mounted instrument panel, with analogue/digital display gauges (speedometer, fuel, coolant

temperature, transmission temperature, hydraulic temeprature) along with full colour LCD screen

including selectable machine and operator menus along with service diagnostic screens.

Parking brake "on" warning light.


(SAE J2105) Dual exterior side view heated mirrors, interior rear view mirror, headrest,



two headlights, two front and two rear worklights, two tail lights, reverse light, turn signals and

cab mounted flashing beacon. Operator's manual. Roof mounted switch bank for accessory controls.

HYDRAULICS Variable displacement piston pump providing an efficient distribution of power with 41 GPM. Load

sensing hydraulics . Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic

circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for improved

handling and safety. Electrically driven emergency steer pump.

LOADER Parallel lift loader end with a general purpose bucket (see Options, Section 3). Four cylinder geometry

for high torque and capacity. Two lift and two tilt cylinders. Return to dig and height kickout. Lift

cylinder safety strut.

LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and

modernized fleet control.






DEALER FIT SECTION - WHEEL LOADERS (LISTED SEPARATELY FOR ALL WHEEL LOADERS)



PRICE PAGES

F.O.B.

SAVANNAH, GA EFFECTIVE: NOVEMBER 6, 2013



416HT 416HT

Std Axles Lim. Slip

SALES Radial Tires Radial Tires

CODE ITEM A/C A/C

6654 417 HT Base machine (TIER 4 INTERIM EMISSIONS COMPLIANT) *

600A624 Michelin XTLA 17.5- R25, L2

600B360 FULL CAB:, SLIDING / TINTEDGLASS, FABRIC SUSPENSION SEAT

600C400 FULL HEATER & AIR CONDITIONING

600D435 25 MPH STANDARD AXLES, AUTOTRANSMISSION

600D436 25 MPH LSD AXLES, AUTOTRANSMISSION

600E955 STANDARD HEIGHT ARM, 3 SPOOLSTD CONTROLS, NON //

600F824 Operators Handbook and Manual Pack, English

600J368 GP Bucket - 2.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount

600J540 Quickhitch - JCB Hydraulic includes Couplings

600N398 Engine Block Heater, 110 Volt



600S434 Front Headlight Box Protection



Shipping Weight - Kgs 10,288 10,288









PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

6654 417 HT Base machine (TIER 4 INTERIM EMISSIONS COMPLIANT) * 14,405 6,534 $112,962

MANUALS (E)

600F824 Operators Handbook and Manual Pack, English 1 0 $0



600A621 GOODYEAR SGL 17.5 X 25 12 PLYWITH FENDERS TO SUIT 1,516 689 $7,588

600A622 GOODYEAR HRL 17.5 X 25 16 PLYWITH FENDERS TO SUIT 1,790 814 $9,514

600A624 Michelin XTLA 17.5- R25, L2 1,684 765 $10,796

600A623 MICHELIN XHA 17.5 R25WITH FENDERS TO SUIT 1,887 858 $12,370

OPERATORS AREA (E)

600B360 FULL CAB:, SLIDING / TINTEDGLASS, FABRIC SUSPENSION SEAT 1,320 600 $4,559

600B361 CANOPY CAB OPEN 600 273 $2,191


600C398 NO HEATER BUILD 35 16 $366

600C399 FULL CAB HEATER 45 20 $1,780

600C400 FULL HEATER & AIR CONDITIONING 85 39 $4,654


600D435 25 MPH STANDARD AXLES, AUTOTRANSMISSION 2,950 1,341 $11,135

600D436 25 MPH LSD AXLES, AUTOTRANSMISSION 2,950 1,341 $14,344


Standard

600E955 STANDARD HEIGHT ARM, 3 SPOOLSTD CONTROLS, NON // 30 14 $1,775

600E956 STANDARD HEIGHT ARM, 3 SPOOLPROPORTIONAL CONTROLS, NON // 60 27 $4,248

600E957 STANDARD HEIGHT ARM, 4 SPOOLMULTI LEVER CONTROLS, NON // 60 27 $3,661

600E959 60 27 $4,692

Super High-Lift

600E967 HIGH LIFT ARM, 3 SPOOL STDCONTROLS, NON // 300 136 $9,842

600E966 HIGH LIFT ARM, 3 SPOOL MULTILEVER CONTROLS, NON // 330 150 $11,004

* NOTE: FOR MULTI-LEVER CONTROL OPTION CONTACT JCB PRODUCT MARKETING


STANDARD HEIGHT ARM, 4 SPOOL

PROPORTIONAL CONTROLS, NON //







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


OTHER OPERATORS COMPARTMENT OPTIONS


600R410 Sun Visor 1 0 $31








600S434 Front Headlight Box Protection 0 0 $142

600S431 Front Roadlight Guards 0 0 $1,518

600B362 0 0 $7,581

NOTE: For corrosion protection options, contact Product Marketing for sales special pricing.


600N390 Reverse Smart Alarm (82-112dba, 5 dba above ambient) 0 0 $247




600T569 Transmission Cooler Bypass System (Quick heat of Transmission oil) 0 0 $839



WASTEMASTER FULL CAB: LOWER

GLASS REPLACED WITH METAL




PRICE PAGES

F.O.B.

SAVANNAH, GAEFFECTIVE: OCTOBER 11, 2013


SALES WEIGHT U.S.


HYDRAULIC QUICKHITCH (for use with Quickhitch Attachments)

600J540 Quickhitch - JCB Hydraulic includes Couplings 620 282 $3,619

600J543 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve 620 282 $4,715

JCB QUICKHITCH LOADER BUCKETS - Requires 600J371 or 600J444 hydraulic quickhitch






JCB DIRECT MOUNTED LOADER BUCKETS (NOT for use with Quickhitch)


600H347 GP bucket - 1.8 cu.yd. w/ Bolt-on Cutting Edge 1,499 681 $5,590



OTHER ATTACHMENTS, QUICKHITCH


600WB42 Forks for ITA Carriages 580 264 $2,311






600WA86 Bucket - 6-in-1 - 1.75 cu. yd. w/ Bolt-on Cutting Edge 2,200 1,000 $12,322

600WB37 Trash Clamp - 2.25 cu.yd. 2,350 1,068 $10,501





JCB WHEEL LOADER

427 HT


MACHINE PRICE LIST

in U.S. Dollars



EFFECTIVE: OCTOBER 11, 2013


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT


fuel tanks with convenient cleanout ports. Front fenders. Side panels and rear engine access with gas

assisted struts. Articulation locking strut for transporting

ENGINE 6.7 L (409 CID) 6-cylinder, 6.7 liter Cummins QSB diesel, variable geometry turbocharger,

diesel oxidation catalyst, exhaust gas reciruculation, air scavenge system, low idle feature

Tier IV Interm, dual element air cleaner, spin-on filters, water separator, thermostart assist and

antifreeze to -33 degrees.





Transmission underbelly guard for added protection

TIRES Several types available, see section 2.

FRONT/REAR AXLE Open differential with outboard planetaries. Optional limited slip differentials available

for superior traction performance. Optional open differentials with automatic differential locking.

All axle types include sinter-lined pads to provide increased resistance to heat

and wear with the multi-disc brake system.

SERVICE BRAKES Oil immersed hub mounted multi-disc design. Dual circuit design with accumulator backup to


output shaft.


70 amp alternator with 2 heavy duty low maintenance batteries rated at 850 CCA. Battery disconnect

switch located in battery compartment. Electrical circuit test button. Back-up Alarm.

INSTRUMENTS Audible and visual engine and powertrain warning system with front mounted instrument panel

including speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature

gauge, clock and automatic emergency engine shut-down system.


(SAE J2105) Dual heated exterior side view mirrors, two interior rear view mirrors, headrest



two headlights, two front worklights, two rear worklights, two tail lights, reverse light, turn signals

and cab mounted flashing beacon. Operator's manual.

HYDRAULICS Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and responsive

distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary hydraulic

circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for improved handling and

safety and an electric emergency steering pump.


for high torque and capacity. Two lift and two tilt cylinders. Return to dig and height kickout. Lift ram

safety strut.

WARRANTY 2 Year full coverage warranty (please see the machine warranty certificate for details)








427 HT WHEEL LOADER U.S. DOLLAR PRICE PAGES F.O.B.



*JCB BRANDED RADIAL FITTED TO PACKAGE BUILDS "B" AND "C"

PACKAGE BUILD CODE: 6751A 6751B 6751C

427HT 427HT 427HT

HD Axles LSD LSD

Bias Tires Radial Tires Radial Tires

SALES Rear Fenders Rear Fenders

CODE ITEM SRS

6751 427 HT Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT)*

600A392 Goodyear SGL 20.5-25 12 ply, L2

600A484 JCB Radial GPR 20.5 R25 L3

600B348 CAB, ROPS/FOPS - includes 3 inch seatbelt

600C385 A/C and Heater System w/ Radiator Debris Guard

600D412

600D413 Heavy Duty Limited Slip Axles with Automatic Powershift




600J500 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (Standard height loader arms)


600N371 #N/A

600S421 Fenders - Wide Rear

600T507 JCB Smooth Ride System (Load suspension)


600T419 Additional Counterwieght - additional 860lbs

Shipping Weight - Lbs. #N/A #N/A #N/A

Shipping Weight - Kgs. #N/A #N/A #N/A

SUGGESTED LIST PRICE #N/A #N/A #N/A

Heavy Duty Standard Axles - Open Differential with Automatic Powershift


Package build configurations cannot normally be changed. If a Package Build does not meet your requirements


NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be fitted

to Package Builds. Notification will be given if an alternate tire is fitted.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

6751 427 HT Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT)* 19,046 8,657 $149,490

MANUALS (E)




600A392 Goodyear SGL 20.5-25 12 ply, L2 1,877 853 $9,912

600A394 Michelin XTLA 20.5 - R25, L2 1,648 749 $11,531

600A395 Michelin XHA 20.5 - R25, L3 2,020 918 $13,815

600A397 Michelin XLDD2A 20.5 X 25 3,400 1,545 $22,753

600A472 JCB Sitemaster Crossply 20.5, 16ply, L2 1,640 745 $8,099

600A484 JCB Radial GPR 20.5 R25 L3 2,020 918 $9,338

OPERATORS AREA (E)

600B348 CAB, ROPS/FOPS - includes 3 inch seatbelt 1,320 600 $4,496

600B349 CAB - Wastemaster - ROPS/FOPS - Lower glass panels replaced with metal panels 1,320 600 $4,496

600B352 CANOPY - Open ROPS/FOPS - includes 3 inch seatbelt 600 273 $2,204


600C385 A/C and Heater System w/ Radiator Debris Guard 85 39 $4,587

600C387 Automatic Claimate Control - A/C and Heater System 85 39 $4,690


600D412 Heavy Duty Standard Axles - Open Differential with Automatic Powershift 0 0 $9,794

600D413 Heavy Duty Limited Slip Axles with Automatic Powershift 0 0 $12,597

600D425 Heavy Duty Standard Axles with Automatic Differential Lock on Front Axle 3,200 1,455 $12,340


STANDARD


600E835 Std. Arms, One Aux. Hyd. Service, 3rd spool w/ Joystick-Mounted Proportional Buttons 60 27 $4,698

600E837 Std. Arms, Two Aux. Hyd. Services, 3 & 4 spool with changeover switch 60 27 $4,466

600E838 60 27 $5,035

HIGH LIFT

600E840 High lift loader arms, One Aux Hyd service, 3 spool 655 298 $10,390

600E841 High lift loader arms, One Aux Hyd Ssrvice, 3 spool w/ joystick mounted proportional buttons 655 298 $11,975

600E843 High lift loader arms, Two Aux Hyd service, 3 & 4 spool with changeover switch 655 298 $11,295

600E844 655 298 $12,848



Std. Arms, Two Aux. Hyd. Services, 3 & 4 spool w/ Joystick-Mounted Proportional Button Control

w/ Changeover Switch for 4th spool

High lift loader arms, Two Aux Hyd service, 3& 4 spool w/ joystick mounted proportional buttons

and changeover switch







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.





600R365 Sun Visor 1 0 $30



600R375 LH Armrest for air suspension seat 1 0 $0



600M627 Widecore Radiator / Heat and AC builds only 0 0 $1,225

600M628 Widecore Radiator / Automatic Climate Control Builds Only 0 0 $1,225

600M629 Epoxy Coated Cooling Pack for Heat and A/C builds Only 0 0 $1,168

600M634 0 0 $2,552

600N346 #N/A #N/A #N/A #N/A


NOTE: For additional corrosion protection options contact Product Marketing for sales special pricing.



600N343 #N/A #N/A #N/A #N/A

600N371 #N/A #N/A #N/A #N/A

600S421 Fenders - Wide Rear 0 0 $1,325

600T507 JCB Smooth Ride System (Load suspension) 305 139 $5,113



600T426 Cooling Fan - Auto Reverse 1 0 $1,385

600T419 Additional Counterwieght - additional 860lbs 837 380 $1,488


600M687 5 Speed Transmission With Lock up Torque Converter (Standard Arms) 0 0 $7,957

600M690 5 Speed Transmission With Lock up Torque Converter (High Lift Arms) 0 0 $7,957

Epoxy Coated Widecore Radiator for Heat and A/C builds Only




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


HYDRAULIC QUICKHITCH - FOR USE WITH QUICKHITCH ATTACHMENTS

600J500 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (Standard height loader arms) 638 290 $5,319

600J501 638 290 $5,319

JCB QUICKHITCH MOUNTED LOADER BUCKETS - Require 600J385 or 600J432 hydraulic quickhitch

Note: Capacity for buckets is for heaped material and does not include additional capacity with edges or teeth





600J358 GP Bucket - 3.0 cu.yd. w/ Teeth - Quickhitch Mount 2,394 1,088 $10,245

600J362 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge - Quickhitch Mount 2,451 1,114 $8,409

JCB DIRECT MOUNT LOADER BUCKETS (NOT for use w/ 600J385 or 600J432 Quickhitch)





600H357 GP Bucket - 3.0 cu.yd. w/ Teeth 2,453 1,115 $10,235

600H361 GP Bucket - 3.1 cu.yd. w/ Bolt-on Cutting Edge 2,529 1,150 $8,401

OTHER ATTACHMENTS, QUICKHITCH MOUNTED (Require 600J385 or 600J432)






600WB38 Carriage - 96 inch w/ 72" x 6" x 2" Pin-on Floating Forks. 1,400 636 $8,298

600WB39 Carriage - 96 inch w/ 72" x 6" x 2" Pin-on HI-BACK Forks. 1,155 525 $8,511


600WB40 Carriage - 74 inch w/ 48" HI-BACK Forks and SINGLE Top Clamp 1,680 764 $11,429

600WB08 Carriage - 74 inch w/ 48" Forks and DUAL Top Clamp 1,627 740 $12,872

600WB41 Carriage - 74 inch w/ 48" HI-BACK Forks and DUAL Top Clamp 1,680 764 $13,013

600WB18 Bucket - 6-in-1 - 2.75 cu. yd. 3,200 1,455 $16,315

600WA98 Bucket - 6-in-1 - 2.25 cu. yd. 2,600 1,182 $12,515

600WB02 Bucket - Scrap Grapple - 3.0 cy, 107" wide Quickhitch Mounted 2,950 1,341 $13,356



Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (For High Lift Loader arms)



JCB WHEEL LOADER

427 ZX


MACHINE PRICE LIST

in U.S. Dollars




427 ZX WHEEL LOADER U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GAEFFECTIVE OCTOBER 11, 2013

STANDARD EQUIPMENT



assisted struts. Articulation locking strut for transporting

ENGINE 6.7 L (409 CID) 6-cylinder, 6.7 liter Cummins QSB diesel, variable geometry turbocharger,

diesel oxidation catalyst, exhaust gas reciruculation, air scavenge system, low idle feature

Tier IV Interm, dual element air cleaner, spin-on filters, water separator, thermostart assist and






Transmission underbelly guard for added protection

TIRES Several types available, see section 2.

FRONT/REAR AXLE Open differential with outboard planetaries. Optional limited slip differentials available






EFFECTIVE: OCTOBER 11, 2013 output shaft.






gauge, clock and automatic emergency engine shut-down system. Parking brake "on" warning light.


(SAE J2105) Dual heated exterior side view mirrors, two interior rear view mirrors, headrest,









LOADER Z-bar loader end with a general purpose bucket (see buckets, section 2). Z-bar geometry for high

breakout torque and capacity. Two lift and one tilt cylinders. Return to dig and height kickout.

Lift ram safety strut.







All prices and specifications subject to change without notice page 2 of 6 426 ZX USA Price Page


PRICE PAGES

F.O.B.




PACKAGE BUILD CODE: 6754A 6754B 6754C427ZX 427ZX 427ZX

HD Axles LSD LSD



CODE ITEM SRS

6754 427ZX Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT)

600A392 Goodyear SGL 20.5-25 12 ply, L2



600C387 Automatic Claimate Control - A/C and Heater System

600D412


EFFECTIVE: OCTOBER 11, 2013Std. Arms, One Aux. Hyd. Service, 3 spool


600H379 GP Bucket - 2.6 cu.yd. w/ Bolt-on Cutting Edge










Heavy Duty Standard Axles - Open Differential with Automatic Powershift








PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

6754 427ZX Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT) 19,049 8,659 $143,688

MANUALS (E)




600A392 Goodyear SGL 20.5-25 12 ply, L2 1,877 853 $9,912

600A394 Michelin XTLA 20.5 - R25, L2 1,648 749 $11,531

600A395 Michelin XHA 20.5 - R25, L3 2,020 918 $13,815

600A397 Michelin XLDD2A 20.5 X 25 3,400 1,545 $22,753



OPERATORS AREA (E)



EFFECTIVE: OCTOBER 11, 2013CANOPY - Open ROPS/FOPS - includes 3 inch seatbelt 600 273 $2,270





600D412 Heavy Duty Standard Axles - Open Differential with Automatic Powershift 0 0 $9,794

600D413 Heavy Duty Limited Slip Axles with Automatic Powershift 0 0 $12,597













PRICE PAGES

F.O.B.



SALES WEIGHT U.S.





600R365 Sun Visor 1 0 $29


600R372 Carbon filter - Cab air intake 0 0 $199







600M634 Epoxy Coated Widecore Radiator for Heat and A/C builds Only 0 0 $2,552



EFFECTIVE: OCTOBER 11, 2013Front Roadlight guards 4 2 $1,483

600T375 Auto Lube (Installed) 30 14 $6,459




600N343 #N/A #N/A #N/A #N/A









600M691 5 Speed Transmission With Lock up Torque Converter 0 0 $7,957




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.




JCB QUICKHITCH MOUNTED LOADER BUCKETS - Require 600J403 or 600J433 hydraulic quickhitch








JCB DIRECT MOUNT LOADER BUCKETS - NOT FOR USE WITH 600J403 OR 600J433 QUICKHITCH


600H375 GP Bucket - 2.3 cu.yd. w/ Teeth - 98 in. wide 1,887 858 $8,096


600H378 GP Bucket - 2.6 cu.yd. w/ Teeth - 98 in. wide 1,966 894 $8,567

EFFECTIVE: OCTOBER 11, 2013GP Bucket - 2.6 cu.yd. w/ Bolt-on Cutting Edge 1,893 860 $7,249





JCB WHEEL LOADER

437 HT


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT




ENGINE 6.7 L (409 CID) 6-cylinder turbo-charged, water-cooled direct injection with 173hp gross

Tier 4 Interim, dual element air cleaner, spin-on filters, water separator, thermostart assist and






Transmission underbelly guard added for protection.


FRONT/REAR AXLES Open differential with outboard planetaries. Optional limited slip differentials available






output shaft.




INSTRUMENTS Audible and visual engine and powertrain warning system with side mounted instrument panel














for high torque and capacity. Two lift and two tilt cylinders. Return to dig and height kickout. Lift ram

safety strut.

LIVELINK 3 year subscription allows for enhanced machine security, improved service monitoring, and modernized

fleet control








437 HT WHEEL LOADER U.S. DOLLAR PRICE PAGES F.O.B.





437HT 437HT 437HT

HD Axles LSD LSD



CODE ITEM SRS

6755 437HT Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT)

600A352 Goodyear SGL 20.5 X 25, 12 PLY




600D414 Heavy Duty Standard Axles with Automatic Powershift




600J503 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (Standard height loader arms)


















PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

6755 437HT Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT) 21,845 9,930 $175,238

MANUALS (E)




600A352 Goodyear SGL 20.5 X 25, 12 PLY 1,877 853 $9,911


600A355 Michelin XHA 20.5- R25, L3 2,020 918 $13,816

600A357 Michelin XMine D2 20.5- R25, L5 3,244 1,475 $22,753



OPERATORS AREA (E)








600D414 Heavy Duty Standard Axles with Automatic Powershift 3,200 1,455 $10,416

600D415 Heavy Duty Limited Slip Axles with Automatic Powershift 3,200 1,455 $13,399



STANDARD



600E791 Std. Arms, Two Aux. Hyd. Services, 3 & 4 spool with changeover switch 60 27 $4,510

600E792 60 27 $5,081

HIGH LIFT

600E794 High lift loader arms, One Aux Hyd service, 3 spool 1,140 518 $10,550

600E795 High lift, One Aux. Hyd. - 3 spool w/ joystick mounted proportional buttons 1,140 518 $11,941

600E797 High Lift, Two Aux. Hyd. Service - 3 & 4 spool with changeover switch 1,140 518 $11,457

600E798 1,140 518 $12,818

SUPER HIGH LIFT

600E812 Super High Lift Arms, One Aux. Hyd. Service, 3 spool 2,610 1,186 $13,546

600E813 Super High Lift Arms, One Aux. Hyd. Service 3 spool 2,610 1,186 $13,340

600E815 Super High Lift Arms, Two Aux. Hyd. Services 3 & 4 spool with changeover switch 2,610 1,186 $15,360

600E816 2,610 1,186 $17,550



High Lift, Two Aux. Hyd. Service - 3 & 4 spool w/ joystick mounted proportional buttons;

changeover switch

Super High Lift Arms, Two Aux. Hyd. Services 3 & 4 spool joystick mounted proportional buttons;

changeover switch

Std. Arms, Two Aux. Hyd. Services, 3 & 4 spool w/ Joystick-Mounted Proportional Button Control

w/ Changeover Switch for 4th spool







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.





600R365 Sun Visor 1 0 $29












600S380 Front Roadlight guards 4 2 $1,483

600S383 Rear Roadlight guards 4 2 $966













600M689 5 Speed Transmission With Lock up Torque Converter (Standard Arms) 0 0 $7,725

600M693 5 Speed Transmission With Lock up Torque Converter (High Lift Arms) 0 0 $7,957

600M694 5 Speed Transmission With Lock up Torque Converter (Super High Lift Arms) 0 0 $7,957




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.




600J504 Quickhitch - JCB Hydraulics w/ Couplings and Electric Pin Isolator Valve (For High Lift loader arms) 639 290 5,321 0

JCB QUICKHITCH LOADER BUCKETS - require 600J385 or 600J432 quickhitch






JCB DIRECT MOUNT LOADER BUCKETS - NOT for use with quickhitch




OTHER ATTACHMENTS, QUICKHITCH MOUNTED (Require 600J385 or 600J432 Quickhitch)








600WB38 Carriage - 96 inch w/ 72" x 6" x 2" Pin-on Floating Forks. 1,400 636 $8,298

600WB39 Carriage - 96 inch w/ 72" x 6" x 2" Pin-on HI-BACK Forks. 1,155 525 $8,511


600WB40 Carriage - 74 inch w/ 48" HI-BACK Forks and SINGLE Top Clamp 1,680 764 $11,429

600WB08 Carriage - 74 inch w/ 48" Forks and DUAL Top Clamp 1,627 740 $12,872

600WB41 Carriage - 74 inch w/ 48" HI-BACK Forks and DUAL Top Clamp 1,680 764 $13,013

600WB18 Bucket - 6-in-1 - 2.75 cu. yd. 3,200 1,455 $16,315





JCB WHEEL LOADER

437 ZX


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT




ENGINE 6.7 L (409 CID) 6-cylinder turbo-charged, water-cooled direct injection with 173hp gross

Tier 4 Interim, dual element air cleaner, spin-on filters, water separator, thermostart assist and






Transmission underbelly guard added for protection.


FRONT/REAR AXLES Open differential with outboard planetaries. Optional limited slip differentials available






output shaft.

















LOADER Z-Bar loader end with a general purpose bucket (see buckets, Section 2). Z-Bar geometry for high




fleet control.










PRICE PAGES

F.O.B.





437ZX 437ZX 437ZX

HD Axles LSD LSD



CODE ITEM SRS

6753 437ZX Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT)

600A352 Goodyear SGL 20.5 X 25, 12 PLY




600D414




600H370 GP Bucket - 3.5 cu.yd. w/ Bolt-on Cutting Edge










Heavy Duty Standard Axles with Automatic Powershift




NOTE: Tires are subject to availability from manufacturers and, due to the current tire shortage; alternative options may be fitted to

Package Builds. Notification will be given if an alternate tire is fitted.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

6753 437ZX Base Machine (TIER 4 INTERIM EMISSIONS COMPLIANT) 21,845 9,930 $166,018

MANUALS (E)




600A352 Goodyear SGL 20.5 X 25, 12 PLY 1,877 853 $9,911


600A355 Michelin XHA 20.5- R25, L3 2,020 918 $13,816

600A357 Michelin XMine D2 20.5- R25, L5 3,244 1,475 $22,753



OPERATORS AREA (E)






















PRICE PAGES

F.O.B.



SALES WEIGHT U.S.





600R365 Sun Visor 1 0 $29
















600N358 Camera - Reverse - remote w/ Color LCD in Cab (must order 24v to 12v converter) 18 8 $2,877









600M695 5 Speed Transmission With Lock up Torque Converter 0 0 $7,725





PRICE PAGES

F.O.B.



SALES WEIGHT U.S.




JCB QUICKHITCH LOADER BUCKETS - require 600J403 or 600J433 quickhitch






JCB DIRECT MOUNT LOADER BUCKETS - NOT for use with quickhitch








JCB WHEEL LOADER

457 HT


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted

hydraulic and fuel tanks with convenient cleanout ports. Steel front and rear fenders, side panels and

rear engine access with gas assisted struts. Articulation locking strut for transporting.

ENGINE 8.9 L (543 CID) 6-cylinder turbo-charged, water-cooled direct injection with 250 gross/249 net HP

Tier 4i, dual element air cleaner, spin-on filters, water separator thermostart assist and antifreeze

to -33 degrees. Integral oil cooler and water pump and self tensioning fan belt. Mesh air intake screens



selection with transmission kickdown button. Forward and reverse control lever on steering column

and an FNR switch on hydraulic control lever. Automatic transmission disconnect activated by

braking. Transmission underbelly guard for added protection.


FRONT/REAR AXLES Standard differentials with outboard planetaries. Optional limited slip differentials available for

superior traction performance. Optional automatic locking differential on front axle also available.


provide stopping ability in all conditions and emergency. Parking brake, electro-hydraulic disc type

operating on transmission output shaft. Applies when engine is shutdown.




INSTRUMENTS Audible and visual engine and powertrain warning system with front mounted instrument panel including

speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature gauge,

clock and auto emergency engine shut-down system. Parking brake "on" warning light & audible alarm.

CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 71 dB(a) internal noise level (SAE J2105)

Dual heated exterior side view mirrors, two interior rear view mirrors, headrest and sun visor.

Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest. Heater/defroster,

windshield wiper/washer, radio provision with speakers. Lighting package includes two headlights, two

front worklights, two rear worklights, two tail lights, reverse light, turn signals and cab mounted

flashing beacon. Ceiling mounted switch bank for accessory controls. Operator's and service manuals

HYDRAULICS Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and

responsive distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary

hydraulic circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for

improved handling and safety. Electric emergency steering pump.

LOADER Parallel lift loader end with a general purpose bucket (see buckets, Section 2). Four cylinder geometry

for high attachment torque and capacity. Two lift and two tilt cylinders. Return to dig

and height kickout. Lift cylinder safety strut.


fleet control









PRICE PAGES

F.O.B.



*JCB BRANDED RADIAL FITTED TO ALL PACKAGE BUILDS

PACKAGE BUILD CODE: 6926A 6926B 6926C457HT 457HT 457HT

SALES Std Axles Lim. Slip Lim. Slip

CODE ITEM SRS

6926 457 HT Base Machine (250 gross, 249 net hp, 6 cyl. TIER 4i engine)




600D423 Heavy Duty Standard Axles with Automatic Differential Lock on Front Axle




600J491 Quickhitch - JCB Hydraulic includes Couplings and electric pin isolator

600J425 GP Bucket - 4.6 cu.yd. w/ Bolt-on Cutting Edge



600T411 JCB Smooth Ride System (Load Suspension)












PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

6926 457 HT Base Machine (250 gross, 249 net hp, 6 cyl. TIER 4i engine) 33,399 15,181 $245,533

MANUALS (E)





600A377 Michelin XMine D2 23.5 - R25, L5 1,887 858 $22,800

600A374 Michelin XHA 23.5 - R25 L3 1,648 749 $10,093

OPERATORS AREA (E)





600C383 Automatic Climate Control - A/C and Heater System 85 39 $5,511


600C381 Heat System - Full w/ Radiator Debris Guard 45 20 $1,948

600C384 NO Heater or Blower w/ Radiator Debris Guard (CANOPY only) 34 15 $811






Standard


600E587 Std. Arms, Two Aux. Hyd. Service, 3 & 4 spool with changeover switch 60 27 $11,219


600E588 60 27 $13,090

600E590 Super High Lift Arms, One Aux. Hyd. Service, 3 spool 200 91 $18,440

600E593 Super High Lift Arms, Two Aux. Hyd. Service, 3 & 4 spool with changeover switch 200 91 $18,883

600E591 Super High Lift Arms, One Aux. Hyd. Service, 3rd spool w/ Joystick-Mounted Proportional Buttons 200 91 $19,804

600E594 200 91 $20,039



Std. Arms, Two Aux. Hyd. Service, 3 & 4 spool with JoyStick Mounted Proportional buttons;

changeover switch

Super High Lift Arms, Two Aux. Hyd. Service, 3 & 4 spool with Joystick Mounted Proportional

buttons; changeover switch

Super High-Lift







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.





600R365 Sun Visor 1 0 $29






600M680 Radiator - Wide Core (For use in ambient temperatures below 104°F) 10 5 $1,697

600M681 Radiator and Oil Cooler - Epoxy Coated 10 5 $1,675

600M682 Radiator, Oil Cooler and A/C Condenser - Epoxy Coated 10 5 $1,584

600M684 Radiator - Wide Core and A/C Condenser - Epoxy Coated 10 5 $3,366






600T422 Auto Lube (Installed)- Super high lift arm only 30 14 $7,136

600W010 320 145 $8,952



600M671 5 Speed Tranmission with Lock-up Torque Converter 0 0 $7,866












Wastemaster Package - 457 models (Front/Rear Roadlight Guards, Carbon Cab Air Filter, Screen

Guard, Widecore Radiator, full Wastemaster Belly Guards and Mesh Air Intake Screens.


A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB





PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



600J491 Quickhitch - JCB Hydraulic includes Couplings and electric pin isolator 706 321 $7,406

JCB QUICKHITCH LOADER BUCKETS - Require 600J491 Hydraulic Quickhitch

Note: Capacity for buckets is for heaped material

600J424 GP Bucket - 4.3 cu.yd. w/ Teeth 3,371 1,532 $15,728

600J425 GP Bucket - 4.6 cu.yd. w/ Bolt-on Cutting Edge 3,636 1,653 $13,769



JCB HT DIRECT MOUNT LOADER BUCKETS (NOT for use with 600J491 Quickhitch)




600H420 GP Bucket - 3.9 cu.yd. w/ Teeth & Segmented Cutting Edge 3,636 1,653 $16,029




600H428 GP Bucket - 4.4 cu. yd. w/ Teeth 3,627 1,649 $15,728

600H429 GP Bucket - 4.6 cu. yd. w/ Bolt-on Cutting Edge 3,892 1,769 $13,769

600H430 GP Bucket - 4.6 cu. yd. w/ Teeth & Segmented Cutting Edge 3,892 1,769 $17,239



JCB WHEEL LOADER

457 ZX


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL Front and rear unitized mainframe modules with a componentized driveline. Frame mounted

hydraulic and fuel tanks with convenient cleanout ports. Steel front and rear fenders, side panels and

rear engine access with gas assisted struts. Articulation locking strut for transporting.

ENGINE 8.9 L (543 CID) 6-cylinder turbo-charged, water-cooled direct injection with 250 gross/249 net HP

Tier 4i, dual element air cleaner, spin-on filters, water separator thermostart assist and antifreeze

to -33 degrees. Integral oil cooler and water pump and self tensioning fan belt. Mesh air intake screens



selection with transmission kickdown button. Forward and reverse control lever on steering column

and an FNR switch on hydraulic control lever. Automatic transmission disconnect activated by

braking. Transmission underbelly guard for added protection.


FRONT/REAR AXLES Standard differentials with outboard planetaries. Optional limited slip differentials available for

superior traction performance. Optional automatic locking differential on front axle also available.


provide stopping ability in all conditions and emergency. Parking brake, electro-hydraulic disc type

operating on transmission output shaft. Applies when engine is shutdown.




INSTRUMENTS Audible and visual engine and powertrain warning system with front mounted instrument panel including

speedometer, hourmeter, fuel gauge, coolant temperature gauge, transmission temperature gauge,

clock and auto emergency engine shut-down system. Parking brake "on" warning light & audible alarm.

CAB UNIT SAE certified ROPS/FOPS fully enclosed pressurized cab with 71 dB(a) internal noise level (SAE J2105)

Dual heated exterior side view mirrors, two interior rear view mirrors, headrest and sun visor.

Fully adjustable cloth suspension seat with 3 inch seat belt and left hand armrest. Heater/defroster,

windshield wiper/washer, radio provision with speakers. Lighting package includes two headlights, two

front worklights, two rear worklights, two tail lights, reverse light, turn signals and cab mounted

flashing beacon. Ceiling mounted switch bank for accessory controls. Operator's and service manuals

HYDRAULICS Twin variable displacement piston pumps feed a "load sensing" system, providing an efficient and

responsive distribution of power. Two spool loader circuit with accumulator backup. 3rd spool auxiliary

hydraulic circuit as standard. Single control lever for lift and tilt functions. Priority steering valve for

improved handling and safety. Electric emergency steering pump.

LOADER Z-Bar loader end with a general purpose bucket (see buckets, Section 2). Z-Bar geometry for high




fleet control.









PRICE PAGES

F.O.B.



*JCB BRANDED RADIAL FITTED TO ALL PACKAGE BUILDS

PACKAGE BUILD CODE: 6922A 6922B 6922C457ZX 457ZX 457ZX

SALES Std Axles Lim. Slip Lim. Slip

CODE ITEM SRS

6922 457 ZX Base Machine (250 gross, 249 net hp, 6 cyl. TIER 4i engine)




600D423 Heavy Duty Standard Axles with Automatic Differential Lock on Front Axle




600H414 GP Bucket - 4.6 cu. yd. w/ Bolt-on Cutting Edge



600T411 JCB Smooth Ride System (Load Suspension)

600T410 XD Counter weight












PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

6922 457 ZX Base Machine (250 gross, 249 net hp, 6 cyl. TIER 4i engine) 30,578 13,899 $239,116

MANUALS (E)





600A377 Michelin XMine D2 23.5 - R25, L5 1,887 858 $22,800

600A374 Michelin XHA 23.5 - R25 L3 1,648 749 $10,093

OPERATORS AREA (E)





600C383 Automatic Climate Control - A/C and Heater System 85 39 $5,511


600C381 Heat System - Full w/ Radiator Debris Guard 45 20 $1,948

600C384 NO Heater or Blower w/ Radiator Debris Guard (CANOPY only) 34 15 $811








600E665 High lift loader arms, One Aux Hyd service, 3 spool 745 339 $15,751









PRICE PAGES

F.O.B.



SALES WEIGHT U.S.





600R365 Sun Visor 1 0 $29






600M680 Radiator - Wide Core (For use in ambient temperatures below 104°F) 10 5 $1,697

600M681 Radiator and Oil Cooler - Epoxy Coated 10 5 $1,675

600M682 Radiator, Oil Cooler and A/C Condenser - Epoxy Coated 10 5 $1,584

600M684 Radiator - Wide Core and A/C Condenser - Epoxy Coated 10 5 $3,366






600T493 Hose Guards (3 - spool machines only) - Steel wrapped hoses on lift and bucket cylinders 0 0 $1,312

600W010 320 145 $8,952



600M671 5 Speed Tranmission with Lock-up Torque Converter 0 0 $7,866








600T410 XD Counter weight 1,764 802 $2,276




Wastemaster Package - 457 models (Front/Rear Roadlight Guards, Carbon Cab Air Filter, Screen

Guard, Widecore Radiator, full Wastemaster Belly Guards and Mesh Air Intake Screens.




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



600J490 Quickhitch - JCB Hydraulic includes Couplings and electric pin isolator 706 321 $7,406

JCB QUICKHITCH LOADER BUCKETS - Require 600J490 Hydraulic Quickhitch






JCB DIRECT MOUNT ZX LOADER BUCKETS - 110 in. wide (NOT for use with 600J490 Quickhitch)








600H413 GP Bucket - 4.3 cu. yd. w/ Teeth 3,627 1,649 $15,726

600H414 GP Bucket - 4.6 cu. yd. w/ Bolt-on Cutting Edge 3,892 1,769 $13,769

600H415 GP Bucket - 4.6 cu. yd. w/ Teeth & Segmented Cutting Edge 3,892 1,769 $17,239



TM 320JCB ARTICULATED TELESCOPIC HANDLER

TIER 4i


MACHINE PRICE LIST

in U.S. Dollars

ECCECTIVE July 1st 2013

TM 320 - TIER 4i U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GA1st July 2013

STANDARD EQUIPMENT

GENERAL

ENGINE

TRANSMISSION

AXLES

BRAKES

ELECTRICAL

INSTRUMENTS

CAB UNIT

TIRES Michelin 460/70 R24 XMCL Agricultural Traction Floatation Radials

TELESCOPIC BOOM

CARRIAGE

HYDRAULICS

Two piece unitized mainframe with rigid frame and componentized driveline.

Heavy duty axles with outboard planetary drive. Front axle with optional limited slip differential and rear axle with

torque proportioning differential

12 volt, Meets IP67 water ingress test standard, 85 amp alternator, 780 CCA, 92 AH low maintenance battery.

Two section, 17ft 1in lift height with hydraulic parallel lift, 6390 lbs maximum lift capacity. With hydraulic boom

suspension

48" wide, "Q-Fit" for easy attachment changes, includes 2" fork shaft.

Meets SAE J231 FOPS/SAE J1040 ROPS requirements, air suspension seat with seat belt, tilt steering column, air

conditioning and heater with defroster vent system, windshield wipers and washers for front/rear and roof glass, rear

view mirror, front worklights, horn, in cab storage, backup alarm meets SAE J994, operators manual

Cab Mounted Single lever Servo joystick with "loader" pattern control and proportional boom extend and auxiliary

functions, Piston Pump load sensing system with 37 GPM, single auxiliary hydraulic service.

TIER 4i JCB EcoMAX turbo intercooled, 125 hp. Dual element air cleaner, spin-on fuel filter, fuel/water separator,

thermo start assist, anti-freeze protection to -35 deg F, reverse drive cooling fan.

Audible and visual warning system, tachometer, hourmeter, fuel gauge, coolant temp gauge, warning lights for battery

charge, air cleaner restriction, engine oil pressure, engine coolant temp, trans oil pressure, parking brake, lift-extend

and tilt on single lever control.

Internal mounted inboard on front axle, multi disc, oil immersed, servo assisted hydraulic actuation, self adjusting,

independent disc type parking brake with brake on alarm and transmission disconnect.

JCB 6 speed autoshift transmission, Powershift direction change, 25 mph travel speed, 12 inch torque converter,

transmission disconnect on foot brake.

SECTIONS ARE ORGANIZED AS FOLLOWS:Section 1 - PACKAGE BUILDSSection 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERSSection 3 - ATTACHMENTS - NEW FACTORY BUILT ORDERSSection 4 - OPTIONS - NEW FACTORY BUILT ORDERS

All prices and specifications subject to change without notice page 2 of 6 TM 320 USD


PRICE PAGES

F.O.B.

SAVANNAH, GA

SALES PACKAGE BUILD CODE: 6270ACODE ITEM CAB

6270 12467 87059 √

406A128 Michelin 460/70 R24 XMCL Agricultural Traction Radials 600 5407 √

406B122 2000 8367 √

406C111 Heater and air conditioning 50 2591 √406D182 Axles - limited slip differential in the front axle and torque proportioning in the rear 2000 8790 √406E131 4 spool valve proportional block with servo Joystick and Smooth ride boom suspension 150 4942 √406F192 Operators manual - American English Language 1 0 √406G114 JCB Q-Fit carriage with fork shaft and hydraulic disconnect 150 2376 √406N154 Rear work lights 2 additional 5 258 √406N155 Front work lights 2 additional 5 258 √406N156 Boom work lights 5 309 √406P145 Engine block heater 5 232 √406R182 Exterior mirrors - deluxe 5 283 √406R202 Sliding door glass 2 567 √406R204 Air suspension seat 150 1133 √406R209 Aux circuit pressure release 5 515 √




SECTION 1 - PACKAGE BUILD

TM320 articulated telescopic handler, 6390lb maximum lift capacity, Tier 4i JCB EcoMAX 125hp turbo

intercooled engine, 4 wheel drive and 6 speed transmission

1st July 2013

Cab - deluxe trim, mechanical suspension seat, full instrumentation and adjustable steer column

Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 3. Package build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.



PRICE PAGES

F.O.B.

SAVANNAH, GA


SALES U.S.


BASE MACHINE (E)

6270 12,467 5,667 87,059$

TIRES (E)

406A128 600 273 5,407$

406A129 673 306 8,652$

406A140 702 319 9,785$

OPERATOR'S AREA (E)

406B122 2,000 909 8,367$

CAB CONDITIONING (E)406C111 Heater and air conditioning 50 23 2,591$

AXLE AND DIFFERENTIAL (E)

406D180 Axles - torque proportioning in the front and rear 1,950 886 8,171$

406D182 Axles - limited slip differential in the front axle and torque proportioning in the rear 2,000 909 8,790$

AUXILIARY HYDRAULICS (E)406E131 4 spool valve proportional block with servo Joystick and Smooth ride boom suspension 150 68 4,942$

OPERATORS MANUAL (E)406F192 Operators manual - American English Language 1 0 -$

CARRIAGE (E)406G114 JCB Q-Fit carriage with fork shaft and hydraulic disconnect 150 68 2,376$

1st July 2013

WEIGHT

Cab - deluxe trim, mechanical suspension seat, full instrumentation and adjustable steer column

TM320 articulated telescopic handler, 6390lb maximum lift capacity, Tier 4i JCB EcoMAX 125hp

turbo intercooled engine, 4 wheel drive and 6 speed transmission

Michelin 460/70 R24 XMCL Agricultural Traction Radials

Michelin 500/70 R24 XMCL Agricultural Traction Floatation Radials

Michelin 15.5 R25 Industrial Traction L2 radials

If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Attachments and/or Options from Section 3 or 4.




PRICE PAGES

F.O.B.

SAVANNAH, GA


SALES WEIGHT U.S.


OPERATOR'S COMPARTMENT OPTIONS

406R182 Exterior mirrors - deluxe 5 2 283$

406R183 Screen guard - front 20 9 824$

406R184 Screen guard - top 20 9 824$

406R202 Sliding door glass 2 1 567$

406R204 Air suspension seat 150 68 1,133$

ELECTRICAL OPTIONS

406N154 Rear work lights 2 additional 5 2 258$

406N155 Front work lights 2 additional 5 2 258$

406N156 Boom work lights 5 2 309$

406P145 Engine block heater 5 2 232$

HYDRAULIC OPTIONS

406R209 Aux circuit pressure release 5 2 515$

406R213 2nd boom auxiliary circuit 10 5 592$

406S146 Rear Hydraulic trailer hitch with rear aux. hydraulics, mirror and trailer brakes 100 45 4,600$

1st July 2013




PRICE PAGES

F.O.B.

SAVANNAH, GA


SALES WEIGHT U.S.


ATTACHMENTS

406H150 Bucket - 1.4 cu yard with bolt on cutting edge 1350 614 3,813$

406L130 1.75 cu. yd, 96" wide GP bucket with edge 1005 457 3,813$

406P105 2.25 cu. yd, 96" wide light material bucket 905 411 3,850$

406L804 2.5 cu. yd, 96" wide light material bucket 1310 595 4,818$

406L817 4.0 cu. yd. Light Material Bucket (Q-Fit Mount) 1725 784 7,527$

406L821 3.0 cu. yd. Bucket - 96" WIDE 1700 773 4,926$

406L823 3.25 cu. yd. Bucket - 102" Wide 1875 852 5,805$

406L824 Cutting Edge - 102" Wide (3-piece) 185 84 694$

FORK SETS

406H132 48" pallet forks - for Q-Fit carriage 550 250 1,335$

406H162 ITA forks 48" and frame, for Q-Fit carriage 1250 568 2,391$

OTHER ATTACHMENTS

406Q806 Q-Fit blank 100 45 709$

1st July 2013

All Q-Fit mount attachments from the Agri range of loadalls (except 550-80) will fit the TM320 and may be ordered from parts using the part numbers listed in

the dealer fit section



SKID STEER ANDCOMPACT TRACK LOADER

JCB SKID STEER LOADER

135NEW GENERATION

CHANGES TO INDIVIDUAL PRICE PAGES MAY OCCUR.

EFFECTIVE: October 1, 2013


MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GAEFFECTIVE: October 1, 2013

STANDARD EQUIPMENT

Engine

Transmission

Tires: Front & Rear

Brakes

Electrical

Instruments

Cab or Canopy

Hydraulics

Loader

Serviceability

JCB 135 SKID STEER LOADER

Rated Operating Capacity of 1350 lbs, Radial Lift Loader Design provides for

maximum loader lift breakout force for superior digging performance.

Auxiliary circuit is standard for operation of hydraulic powered attachments.

Choice of Standard Mechanical or Optional Powered Quick Hitch. Hydraulic

float standard on all models. Loader options include: Parallel Lift in raise only.

Machine braking provided through the hydrostatic transmission. Parking

brake consists of multiple disc, oil immersed, spring applied hydraulic release

that provides a fail safe with engine off. Electrically activated through a

switch on the instrument panel or by raising seat bar.

Servo Controls with hydrostatic transmission. Optional Creep Speed

provides operation from 0 to 1/2 of full speed for special applications.

10 x 16.5 8 ply, Heavy Duty JCB Tires providing 59.8" width.

1.9L (113.5CID) 48 SAE Gross hp, Kohler KDI 1903 TCR engine,

centrifugal dry type dual stage air cleaner. Fuel filter with water separator;

1000 CCA battery; variable speed hydraulically driven fan.

Cab tilts forward to provide further access to the hydraulic components. Rear

door provides class leading access to engine bay and daily maintenance and

check points.

Meets IP69 water ingress standard. Worklights, 2 Front and 1 Rear, Reverse

Alarm, Horn, and 12V Accessory Socket.

Audible and visual warning systems, right and left side mounted instrument

panels. Standard electronic throttle control with optional foot throttle.

SAE certified ROPS/FOPS, left side entry. Vinyl seat with retractable

seatbelt and operator restraint interlock for drive and loader functions. Cab

units are pressurized and available with heat, sliding left window, and full side

door. Right Hand glass as standard on canopy and cab builds.

18.5gpm @ 3335psi standard flow.

All prices and specifications subject to change without notice Page 2 of 10 JCB 135 Skid Steer USD Price Page

JCB 135 SKID STEER LOADER U.S. DOLLAR

PRICE PAGES

F.O.B.



PACKAGE BUILD CODE: 8600A 8600BSALES CANOPY CAB

CODE ITEM STD FLOW HIGH FLOW

8600 JCB 135 Tier 4 Wheeled, Radial Lift, New Generation, Skid Steer Loader

881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width)

881B204

881B224

881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics

881D301 GP Bucket - 66" - 14.1 cu-ft

881E418 North American English Manual - for Cab machine

881E419 North American English Manual - for Canopy machine

881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR)

881G305 Block Heater - 110V Kohler Engine

881G201 Foot Throttle (for JCB Servo Controls)

881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155,150T)

881G218 Vinyl Air Suspension Seat with Adjustable Control Pods


Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm

Float and Mechanical Quickhitch. - 3 CYL

Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical

Quickhitch. - 3 CYL

Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build Sections following.


F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)

8600 JCB 135 Tier 4 Wheeled, Radial Lift, New Generation, Skid Steer Loader $29,954

TIRE SETS (E) pick one

881A201 10 x 16.5 8PR HD Tires & Wheels (provides 59.8" width) $0

881A202 10 x 16.5 8PR HD Wide Track Tires & Wheels (provides 63" width) $46

881A205 10x 16.5 10PR Lifemaster Industrial Pneumatic Tires & Wheels (provides 59.8" width) $721

881A206 10x 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Tire & Wheels (provides 63" width) $747

881A207 31.5/13 x 16.5 8PR SK Hauler High Floatation Tires & Wheels (provides 64.7" width) $901

881A208 7x 15 Solid Industrial Tires and Wheels (provides 54.3" width) $1,442

881A209 10 x 16.5 Brawler Solid Flex Industrial Tires & Wheels (provides 59.8" width) $1,803

881A213 7 x 15 14PR Pneumatic Tires and Wheels (provides 53.9" width) $824

881A216 33 x 6 x 10 Slick Brawler Solid Flex Industrial $1,937

OPERATOR ENCLOSURES (E) pick one

Canopy Packages

881B203 $642

881B204 $709

Cab with Heater Packages

881B213 $2,561

881B214 $2,627

MACHINE CONTROLS (E)

881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics $1,061

Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and

Mechanical Quickhitch. - 3 CYL

JCB 135 SKID STEER LOADER EFFECTIVE: October 1, 2013


Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual Pattern

Control, Reversing Fan and Roadlights) - 3 CYL


Mechanical Quickhitch. (Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual

Pattern Control, Reversing Fan and Roadlights) - 3 CYL


Quickhitch. - 3 CYL

To complete a machine order, select one code from each E (Essential) feature category below. Select Options and Attachments as required.


F.O.B.

SAVANNAH,

GA

U.S. LIST

BUCKETS (E) pick one - see H codes for bucket accessories

GP Buckets

881D346 GP Bucket - 54" - 12.5 cu-ft $863

881D347 GP Bucket - 60" - 12.7 cu-ft $947

881D301 GP Bucket - 66" - 14.1 cu-ft $962

Landscape Buckets

881D348 Landscape Bucket - 54" - 14.2 cu-ft $825



6 in 1 Buckets

881D365 6 In 1 Multipurpose Bucket - 60" - 12.2cu-ft $3,420


Pallet Forks

881D313 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632


U.S. DOLLAR PRICE PAGES JCB 135 SKID STEER LOADER EFFECTIVE: October 1, 2013

To complete a machine order, select one code from each E (Essential) feature category below. Select Options and/or Attachments from pages 5 to 9.


F.O.B.

SAVANNAH,

GA

U.S. LIST

OPERATOR HANDBOOKS (E) pick one

881E417 Spanish Export (American) Manual $0

881E418 North American English Manual - for Cab machine $0

881E419 North American English Manual - for Canopy machine $0

881E420 French/Canadian Manual $0

HYDRAULIC SYSTEMS (E)

881F207 Standard Auxiliary Hydraulics - 18 gpm at 3335 psi (68 lpm /230 BAR) $0

MACHINE OPTIONS (do not need to order if included in operator enclosure packages)

Electrical Options

881G213 Roadlight Kit with Brake lights for non A/C Machines Right Hand DIP $889

881G305 Block Heater - 110V Kohler Engine $134

881G231 Rotating Beacon and Socket $140

881G254 Worklights with 2 rear lights for non A/C machines $134

881G295 ISO & Dual Hand Control Pattern $558

881G301 Creep Speed $125

881G304 White Noise Reverse Alarm $189

881G282 Powered Quick Hitch $782

Loader Options

881G313 Parallel Lift (Raise Only) - 135 $494

Hydraulic Options

881G221 Biodegradable Oils $303

Operators Compartment Options

881G201 Foot Throttle (for JCB Servo Controls) $196

881G205 Keyless Start/ JCB Immobilizer for Cab Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402

881G211 Key Start/ Key Immobilizer- All machine configurations $402

881G217 Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402

881G234 Keyless Start/ JCB Immobilizer for Canopy Builds with Options (if ordering HF, SRS, Hyd QH or Roadlights) $402

881G238 Keyless Start/ JCB Immobilizer for Cab Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights) $402

881G208 Impact Protection - Laminated Glass - for Canopy builds $536

881G302 Impact Protection - For Canopy Builds - Front Laminated Glass with Wiper $857

881G303 Laminate Glass to replace tempered as standard on cab builds $123

881G300 Front Mesh Guard for Canopy Machines (No front glass required) $673

881G279 Vinyl Mechanical Suspension Seat $240

881G218 Vinyl Air Suspension Seat with Adjustable Control Pods $616

881G219 Cloth Air Suspension Seat with Adjustable Control Pods $696

881G220 3 inch wide Seatbelt $59

881G242 3 inch wide, 3 Point Seat Belt - Recommended for 2 Speed Option $268


881G222 Radio with Speakers, Aerial and MP3 cable $300

881G236 $670

881G310 Additional Soundproofing (for special applications) $438

881G258 Right Hand Mesh to Replace Glass as Standard $187

881G212 Hardide Pivot Pins (For Severe Heavy Duty Applications) $694

881G296 Spark Arrestor Muffler - 3 CYL $231

881G229 Twine Cutter - Wheeled Machines Only $134

Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the

full left side door

U.S. DOLLAR

PRICE PAGES JCB 135 SKID STEER LOADER EFFECTIVE: October 1, 2013

Select Optional Equipment as desired within limitations (if indicated).


F.O.B.

SAVANNAH,

GA

U.S. LIST

MACHINE OPTIONS CONTINUED ( - do not need to order if included in operator enclosure packages)

881G287 Reversing Fan $840

881G288 Tool Kit, Basic $322

881G289 Tool Kit, Full $478

881G290 Canopy Wheeled Fender - LH $119

881G291 Cab Wheeled Fender - LH $119

881G294 External Anolog Engine Hourmeter $135

881G308 Pre-cleaner T4 $465

APPLICATION PACKAGES

881G214 $2,009

881G215 $3,348

881G216 $3,014

881G251 $2,281

881G252 $996

881G261 $1,906

881G262 $3,240

881G263 $2,903

881G264 $2,785

881G265 $4,178

881G266 $3,851

881G267 $1,106

881G307 $514

BUCKET ACCESSORIES

881H319 Bolt on Edge for 54" bucket (1372mm) $254


881H301 Bolt on Edge for 66" Bucket (1676mm) $293

881H321 Tooth Bar for 54" bucket - Over bucket (1372mm) $581


881H305 Tooth Bar for 66" Bucket - Over Bucket (1676mm) $619

881H323 Tooth Bar for 54" bucket - Over bolt on edge (1372mm) $581


881H309 Tooth Bar for 66" Bucket - Over Bolt on Edge (1676mm) $619

881H313 66" - 84" Adjustable Tooth Guard (fits over Tooth Bar for safe transport) $129

881H314 Pallet Fork Frame, Load Backrest (LBR) With 42" Tines $1,632


Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines

Only

Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen,

Heavy Duty Rear Bars - Cab Machines Only

Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines

Only

Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy

Machines Only

Heavy Duty Rear Bars Protective Bars for Adverse Applications, as a stand alone option

Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen,

Heavy Duty Rear Bars - Canopy Machines Only

A/C FOPS Guard

Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy

machines must order G208

Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand

Steel Mesh to provide protection over laminated cab glass (Not for Canopy Builds)

Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide

protection over laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection

Packages have been ordered

JCB 135 SKID STEER LOADERU.S. DOLLAR

PRICE PAGES

Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard,

Heavy Duty Rear Bars - Canopy machines must order G208


Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy


Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy

Machines Only



F.O.B.

SAVANNAH,

GA

ADDITIONAL MACHINE ATTACHMENTS PART NUMBER U.S. LIST

Snow Removal Attachments

881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,474

881U533 60" Snow Blade - Manual Angle 333/L8499 $1,666

881U534 60" Snow Blade - Hydraulic Angle 333/L8498 $2,020

881U535 60" Snow Blower - Standard Flow 333/L6154 $6,327

Grapple Attachments

881U209 60" Heavy Duty Brush Grapple 333/L5021 $3,749


881U211 60" Heavy Duty Scrap Grapple (solid floor) 333/L1085 $2,668


Hydraulic Brooms/Sweepers

881U303 Angle broom - 60" with manual angle adjustment link 332/X2465 $4,997

881U302 Hydraulic angle kit for Angle Broom 332/L3983 $1,358

Hammers

881U354 HM266Q (includes Chisel & Moil) - *881U355 Mounting Bracket required* 980/A7456 $12,278

881U355 Mounting Bracket - Required for HM266Q Hammer 980/28400 $964

Auger Drive Units

881U400 Planetary Drive Auger - Standard Flow - (includes mounting bracket & hoses) 332/L3978 $2,430

Auger Bits - Standard Duty

881U450 6" X 4' Standard Auger 2" Hex 980/A2019 $256







881U457 36" X 4' Standard Auger 2" Hex 980/A2030 $1,197

EFFECTIVE: October 1, 2013 JCB 135 SKID STEER LOADER U.S. DOLLAR PRICE PAGES

Note: Machine Width Is Dependent On Tire / Track Specification. Confirm Overall Machine Width With Specific Tires / Tracks For Correct Bucket Sizing.


F.O.B.

SAVANNAH,

GA


Auger Bits - Heavy Duty

881U458 6" X 4' Heavy Duty Auger 2" Hex 980/A3001 $472



881U461 15" X 4' Heavy Duty Auger 2" Hex 980/A2034 $1,066





Auger Bits - Tree & Shrub

881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7251 $579



881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex 980/L7270 $1,164

Auger Extensions

881U470 Hex. Drive Extension - 12" 980/L7271 $168



Landscape Development Tools

881U473 60" Landscape Power Rake with Manual Angle 333/L6180 $7,923

881U474 60" Landscape Power Rake with Hydraulic Angle 333/L6126 $8,335

881U526 52" Tiller - 6 inch tines - Standard Flow 333/L8191 $4,391




F.O.B.

SAVANNAH,

GA


Agricultural Attachments

881U530 60" Manure Forks with Top Grapple 333/L6079 $2,424


881U532 Bale Spear 333/L5627 $821

Trenchers

881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow 333/L8251 $4,900


Stump Grinders

881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow 332/X4294 $8,349

Cold Planers

881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow 332/X4382 $13,549

EFFECTIVE: October 1, 2013 JCB 135 SKID STEER LOADERU.S. DOLLAR

PRICE PAGES



JCB COMPACT TRACK LOADER

150TNEW GENERATION




MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH,

GA

STANDARD EQUIPMENT

Engine

Transmission

Rubber Tracks:

Brakes

Electrical

Instruments

Cab or Canopy

Hydraulics

Loader

Serviceability

18.5gpm @ 3335psi standard flow. Optional 26.4gpm @ 3335psi available.

Fitted with 12.6" (320mm) wide tracks provide a machine with of 66" and a

ground bearing pressure of 6.75 psi.

Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 5.6

mph in both forward and reverse. Optional Creep Speed provides operation

from 0 to 50% of full speed for special applications. An optional two (2)

speed transmission is available providing a low range of 0 - 5.6 mph and a

high range of 0 - 7.8 mph.

EFFECTIVE: OCTOBER 1,

2013


brake consists of multiple disc, oil immersed, spring applied hydraulic

release that provides a fail safe with engine off. Electrically activated

through a switch on the instrument panel or by raising seat bar.

JCB 150T COMPACT TRACK LOADER

Rated Operating Capacity of 1500 lbs, Radial Lift Loader Design provides

for maximum loader lift breakout force for superior digging performance.


Choice of Standard Mechanical or Optional Powered Quick Hitch.

Hydraulic float standard on all models. Loader options include: Parallel Lift

in raise only and SRS (smooth ride system).

Cab tilts forward to provide further access to the hydraulic components.

Rear door provides class leading access to engine bay and daily

maintenacne and check points.




Meets IP69 water ingress standard. Worklights, 2 Front and 1 Rear,

Reverse Alarm, Horn, and 12V Accessory Socket.



SAE certified ROPS/FOPS, left side entry. Mechancial vinyl suspension

seat with retractable seatbelt and operator restraint interlock for drive and

loader functions. Cab units are pressurized and available with heat or heat

and A/C, sliding left window, and full side door. Right Hand glass as

standard on canopy and cab builds.

All prices and specifications subject to change without notice Page 2 of 10 JCB 150T Compact Tracked USD Price Page

JCB 150T SKID STEER LOADER U.S. DOLLAR

PRICE PAGES

F.O.B.





8610 JCB 150T Tier 4 Tracked, Radial Lift, New Generation, Compact Tracked Loader

881A221 320 mm Wide Rubber Track Set - 3 Roller (provides 66" width)

881B234

881B254


881C205

881D301 GP Bucket - 66" - 14.1 cu-ft




881F208




881G281 2 Speed - Tracked

881G286 SRS, Smooth Ride System - Radial Lift (For machines with parallel lift)




JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.

Required with High Flow Hydraulics

High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function

Joystick Option)


Quickhitch. - 3 CYL


All prices and specifications subject to change without notice Page 3 of 10 JCB 150T Skid Steer USD Price Page

F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)

8610 JCB 150T Tier 4 Tracked, Radial Lift, New Generation, Compact Tracked Loader $41,342

TRACKS (E)

881A221 320 mm Wide Rubber Track Set - 3 Roller (provides 66" width) $0


Canopy Packages

881B233 $618

881B234 $684


881B243 $2,495

881B244 $2,561

Cab with Heater and A/C Packages

881B253 $4,246

881B254 $4,312


881C202 $1,061

881C205 $1,618



Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and


JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics

U.S. DOLLAR PRICE

PAGES JCB 150T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013

JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required

with High Flow Hydraulics

Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch.

(Cannot order options with this package - High Flow, SRS, Powered Quickhitch, Dual Pattern Control,

Reversing Fan and Roadlights) - 3 CYL







Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Mechanical Quickhitch.

- 3 CYL



F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D301 GP Bucket - 66" - 14.1 cu-ft $962

881D340 GP Bucket - 68" - 14.3 cu-ft $1,004

881D302 GP Bucket - 72" - 15.4 cu-ft $1,043

881D315 GP Bucket - 66" - 14.1 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,593






Landscape Buckets


881D306 Landscape Bucket - 72" - 19.2 cu-ft $1,056

881D319 Landscape Bucket - 66" - 17.5 cu-ft with Pallet Fork Frame, LBR, 42" Tines $2,590




6 in 1 Buckets



881D323 6 In 1 Multipurpose Bucket - 66" - 15.8cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,132




Pallet Forks



U.S. DOLLAR PRICE PAGES JCB 150T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013



F.O.B.

SAVANNAH,

GA

U.S. LIST






HYDRAULIC SYSTEMS (E) pick one


881F208 $1,052


Electrical Options

881G210 Roadlight Kit with Brake lights for A/C Machines Right Hand Dip $881









Loader Options

881G285 SRS, Smooth Ride System - Radial $1,005

881G286 SRS, Smooth Ride System - Radial Lift (For machines with parallel lift) $1,005

881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155,150T) $494

881G312 Parallel Lift (Raise Only) - Radial Lift - High Flow (155,150T) $494

Hydraulic Options

881G281 2 Speed - Tracked $1,502



















881G237 $569

881G310 $438

881G258 $187

881G212 $694

881G296 $231

Right Hand Mesh to Replace Glass as Standard

Hardide Pivot Pins (For Severe Heavy Duty Applications)

Spark Arrestor Muffler - 3 CYL

Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the

full left side door

U.S. DOLLAR

PRICE PAGES JCB 150T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013

High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option)

Additional Soundproofing (for special applications)



F.O.B.

SAVANNAH,

GA

U.S. LIST

MACHINE OPTIONS CONTINUED (do not need to order if included in operator enclosure packages)









881G214 $2,009

881G215 $3,348

881G216 $3,014

881G251 $2,281

881G252 $996

881G261 $1,906

881G262 $3,240

881G263 $2,903

881G264 $2,785

881G265 $4,178

881G266 $3,851

881G267 $1,106

881G307 $514

BUCKET ACCESSORIES













JCB 150T COMPACT TRACK LOADERU.S. DOLLAR

PRICE PAGESEFFECTIVE: October 1, 2013


Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines Only

Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order

G208

Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars -

Canopy machines must order G208

Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order

G208

Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide

protection over laminated cab glass (Not for Canopy Builds)

Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated

cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been ordered

Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars -

Cab Machines Only

Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab Machines Only

Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines Only

A/C FOPS Guard


Canopy Machines Only

Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab Machines Only



F.O.B.

SAVANNAH,

GA

ADDITIONAL MACHINE ATTACHMENTS U.S. LIST

High Capacity / Light Material Buckets

881U690 75" High Capacity / Light Material Bucket - 21 cu. ft. Capacity 332/L1829 $1,376

Snow Buckets


881U650 72" Snow Blade - Manual Angle 332/X4347 $1,817


881U653 72" Snow Blade - Hydraulic Angle 332/X4350 $2,363


881U663 72" Snow Blower - Standard Flow 332/X4383 $7,085


881U660 72" Snow Blower - HIGH FLOW 332/X4399 $9,640


881U670 72" Snow Push 333/L5629 $3,054

Grapple Attachments





881U213 76" Bolt on edge for Scrap Grapple (solid floor) 334/L7904 $723




Hammers



Auger Drive Units











EFFECTIVE: October 1, 2013 JCB 150T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES

PART NUMBER


Attachments designated as High Flow require Essential code 881F208


F.O.B.

SAVANNAH,

GA
















Auger Extensions








881U527 66" Vibratory Roller - Smooth Drum 332/X4709 $9,725

881U528 66" Vibratory Roller - Padded Drum 332/X4710 $10,551




PART NUMBER




F.O.B.

SAVANNAH,

GA





881U532 Bale Spear 333/L5627 $821

Trenchers



881U521 48" Trencher with 6" wide chain, crumber and hoses - Standard Flow 332/X4289 $5,656

Stump Grinders


881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW 332/X4295 $9,518

Cold Planers


881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/X4299 $17,409


881U608 24" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW 332/L7272 $21,413

EFFECTIVE: October 1, 2013 JCB 150T COMPACT TRACK LOADERU.S. DOLLAR

PRICE PAGES

PART NUMBER





155NEW GENERATION




MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GA


2013

STANDARD EQUIPMENT

ENGINE

TRANSMISSION

TIRES: Front & Rear

BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

LOADER

SERVICEABILITY


Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2

Front and 1 Rear, Reverse Alarm, Horn, and 12V Accessory Socket.

Cab tilts forward to provide further access to the hydraulic components.

Rear door provides class leading access to engine bay and daily

maintenance check points.


maximum loader lift breakout force for superior digging performance.


Choice of Standard Mechanical or Optional Powered Quick Hitch. Hydraulic

Float standard on all models. Loader Options include: Parallel Lift in raise

only and SRS (smooth ride system).



brake consists of multiple disc, oil immersed, spring applied hydraulic release

that provides a fail safe with the engine off. Electrically activated through a

switch on the instrument panel or by raising seat bar.






Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 7.5

mph in both forward and reverse. Optional Creep speed provides operation

from 0 - 1/2 of full speed for special applications. An optional two speed

transmission is available providing a low range of 0 - 7.5 mph and a high

range of 0 - 11.5 mph

10 x 16.5 8 ply, Heavy Duty WIDE TRACK JCB Tires providing 63" width.

SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and

operator restraint interlock for drive and loader functions. Cab units are

pressurized and available with heat or heat and A/C, sliding left window and

full side door. Right Hand glass as standard on canopy and cab builds.



PRICE PAGES

F.O.B.





8601 JCB 155 Tier 4 Wheeled, Radial Lift, New Generation, Skid Steer Loader


881B204

881B224


881C205

881D301 GP Bucket - 66" - 14.1 cu-ft




881F208





881G280 2 Speed Motors - Wheeled

881G286 SRS, Smooth Ride System - Radial Lift (For machines with parallel lift)







Joystick Option)


Quickhitch. - 3 CYL



F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)

8601 JCB 155 Tier 4 Wheeled, Radial Lift, New Generation, Skid Steer Loader $31,099












Canopy Packages

881B203 $642

881B204 $709


881B213 $2,561

881B214 $2,627


881B223 $4,246

881B224 $4,312


881C202 JCB Servo Controls- 3 way Joysticks with Auxiliary Hydraulics $1,061

881C205 $1,618








Quickhitch. - 3 CYL













F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D346 GP Bucket - 54" - 12.5 cu-ft $863

881D347 GP Bucket - 60" - 12.7 cu-ft $947

881D301 GP Bucket - 66" - 14.1 cu-ft $962

881D340 GP Bucket - 68" - 14.3 cu-ft $1,004





Landscape Buckets






6 in 1 Buckets





Pallet Forks






F.O.B.

SAVANNAH,

GA

U.S. LIST








881F208 $1,052


Electrical Options










Loader Options

881G285 SRS, Smooth Ride System - Radial $1,005

881G286 SRS, Smooth Ride System - Radial Lift (For machines with parallel lift) $1,005

881G299 Parallel Lift (Raise Only) - Radial Lift - Standard Flow (155,150T) $494

881G312 Parallel Lift (Raise Only) - Radial Lift - High Flow (155,150T) $494

Hydraulic Options

881G280 2 Speed Motors - Wheeled $1,502






881G217 $402














881G236 $670






Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when

getting the full left side door

Keyless Start/ JCB Immobilizer for Canopy Builds with No Options (cannot order HF, SRS, Hyd QH or Roadlights)

U.S. DOLLAR


High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option)



F.O.B.

SAVANNAH,

GA

U.S. LIST










881G214 $2,009

881G215 $3,348

881G216 $3,014

881G251 $2,281

881G252 $996

881G261 $1,906

881G262 $3,240

881G263 $2,903

881G264 $2,785

881G265 $4,178

881G266 $3,851

881G267 $1,106

881G307 $514

BUCKET ACCESSORIES
















A/C FOPS Guard

Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection

over laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been

ordered


Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty

Rear Bars - Cab Machines Only


Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy Machines

Only



Rear Bars - Canopy Machines Only

Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy Machines

Only

Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel

Mesh to provide protection over laminated cab glass (Not for Canopy Builds)

Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty

Rear Bars - Canopy machines must order G208

Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines

must order G208


PRICE PAGES

Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines

must order G208




F.O.B.

SAVANNAH,

GA



881U536 54" Medium Duty Snow Bucket - 25.7 cu. ft. Capacity 332/X2435 $1,474






881U670 72" Snow Push 333/L5629 $3,054

Grapple Attachments








Hammers



Auger Drive Units












PART NUMBER


Attachments designated High Flow require Essential code 881F208


F.O.B.

SAVANNAH,

GA



881U458 6" X 4' Heavy Duty Auger 2" Hex $472



881U461 15" X 4' Heavy Duty Auger 2" Hex $1,066






881U466 18" X 4' Tree & Shrub Planting Auger 2" Hex $579



881U469 36" X 4' Tree & Shrub Planting Auger 2" Hex $1,164

Auger Extensions

881U470 Hex. Drive Extension - 12" $168




881U526 52" Tiller - 6 inch tines - Standard Flow $4,391

881U473 60" Landscape Power Rake with Manual Angle $7,923

881U474 60" Landscape Power Rake with Hydraulic Angle $8,335

333/L8191

333/L6180

333/L6126

980/L7273

980/L7251

980/L7257

980/L7267

980/L7270

980/L7271

980/L7272

JCB 155 SKID STEER LOADER U.S. DOLLAR PRICE PAGES

PART NUMBER


980/A2039

980/A2032

980/A3001

980/A2031

980/A2034

980/A2035

980/A2037

980/A2038




F.O.B.

SAVANNAH,

GA



881U530 60" Manure Forks with Top Grapple $2,424

881U531 66" Manure Forks with Top Grapple $2,725

881U532 Bale Spear $821

Trenchers

881U529 30" Trencher with 6" wide chain, crumber and hoses - Standard Flow $4,900

881U520 36" Trencher with 6" wide chain, crumber and hoses - Standard Flow $5,152

Stump Grinders

881U600 Stump Grinder - 26" Wheel Diameter / Standard Flow $8,349

881U601 Stump Grinder - 30" Wheel Diameter / HIGH FLOW $9,518

Cold Planers

881U605 12" Cold Planer - Hyd. Side Shift / Tilt / Depth - Standard Flow $13,549

881U606 16" Cold Planer - Hyd. Side Shift / Tilt / Depth - HIGH FLOW $17,409



333/L8251


332/X4299

332/X4300

332/L7272

332/L7251

332/X4294

332/X4295

332/X4382


PRICE PAGES

PART NUMBER

333/L6079

333/L6106

333/L5627





175NEW GENERATION




MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GA

STANDARD EQUIPMENT

ENGINE

TRANSMISSION

TIRES: FRONT AND REAR

BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

SERVICEABILITY



LOADER Rated Operating Capacity of 1750 lbs, Vertical Lift Loader Design provides vertical lift path and

increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of

hydraulic powered attachments. Choice of Standard Mechanical or Optional Powered Quick Hitch.

Hydraulic Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS

(smooth ride system).

Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple

disc, oil immersed, spring applied hydraulic release that provides a fail safe with the engine off.

Electrically activated through a switch on the instrument panel or by raising seat bar.







check points.

Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 7.5 mph in both forward and

reverse. Optional Creep speed provides operation from 0 to 1/2 of full speed for special applications.

An optional two (2) speed transmission is available providing a low range of 0 - 7.5 mph and a high

range of 0 - 11.5 mph.

SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and operator

restraint interlock for drive and loader functions. Cab units are pressurized and

available with heat or heat and A/C, sliding left window and full side door. Right

Hand glass as standard on canopy and cab builds.

Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear,


1.9L (113.5CID) 56 SAE Gross hp, Kohler KDI 1903 TCR engine, centrifugal dry type dual stage air

cleaner. Fuel filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.



PRICE PAGES

F.O.B.





8602 JCB 175 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader


881B204

881B224


881C205

881D301 GP Bucket - 66" - 14.1 cu-ft




881F206




881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 190, 205, 190T, 205T)


881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift)







Joystick Option)


Quickhitch. - 3 CYL



F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)

8602 JCB 175 Tier 4 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $32,653












Canopy Packages

881B203 $642

881B204 $709


881B213 $2,561

881B214 $2,627


881B223 $4,246

881B224 $4,312


881C202 $1,061

881C205 $1,618






Quickhitch. - 3 CYL
















F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D347 GP Bucket - 60" - 12.7 cu-ft $947

881D301 GP Bucket - 66" - 14.1 cu-ft $962

881D340 GP Bucket - 68" - 14.3 cu-ft $1,004





Landscape Buckets





6 in 1 Buckets





6 in 1 Buckets






F.O.B.

SAVANNAH,

GA

U.S. LIST








881F206 High Flow Hydraulics - 26.4 gpm at 3335 psi (100 lpm/230 BAR) (Requires 7 way Multi-Function Joystick Option) $1,052


Electrical Options










Loader Options

881G283 SRS, Smooth Ride System - Vertical Lift $1,005

881G284 SRS, Smooth Ride System - Vertical Lift (For machines with parallel lift) $1,005

881G298 Parallel Lift (Raise Only) - Vertical Lift - Standard Flow (175, 190, 205, 190T, 205T) $494

881G311 Parallel Lift (Raise Only) - Vertical Lift - High Flow (175, 190, 205, 190T, 205T) $494

Hydraulic Options





















881G236 $670








U.S. DOLLAR




F.O.B.

SAVANNAH,

GA

U.S. LIST


Other Options









881G214 $2,009

881G215 $3,348

881G216 $3,014

881G251 $2,281

881G252 $996

881G261 $1,906

881G262 $3,240

881G263 $2,903

881G264 $2,785

881G265 $4,178

881G266 $3,851

881G267 $1,106

881G307 $514

BUCKET ACCESSORIES













A/C FOPS Guard


Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear

Bars - Canopy Machines Only





Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must

order G208

Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear

Bars - Canopy machines must order G208

Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must

order G208

Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to

provide protection over laminated cab glass (Not for Canopy Builds)

Enclosed Cab Additional Protection Package - Includes Left Hand and Right Hand Steel Mesh to provide protection over

laminated cab glass - Can only be ordered if 881G214, 881G215 or 881G216 Protection Packages have been ordered


Bars - Cab Machines Only





F.O.B.

SAVANNAH,

GA








881U670 72" Snow Push 333/L5629 $3,054

Grapple Attachments








Hammers



Auger Drive Units












PART NUMBER




F.O.B.

SAVANNAH,

GA
















Auger Extensions









PART NUMBER




F.O.B.

SAVANNAH,

GA





881U532 Bale Spear 333/L5627 $821

Trenchers



Stump Grinders



Cold Planers






PRICE PAGES

PART NUMBER





190NEW GENERATION




MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH,

GA

STANDARD EQUIPMENT

ENGINE

TRANSMISSION


BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

SERVICEABILITY



hydraulic powered attachments. Choice of Standard Mechanical or Optional Powered Quick

Hitch. Hydraulic Float standard on all models. Loader Options include: Parallel Lift in raise only

and SRS (smooth ride system).


door provides class leading access to engine bay and daily maintenance

check points.

Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front

and 1 Rear, Reverse Alarm, Horn, and 12V Accessory Socket.

Machine braking provided through the hydrostatic transmission. Parking brake consists of

multiple disc, oil immersed, spring applied hydraulic release that provides a fail safe with the

engine off. Electrically activated through a switch on the instrument panel or by raising seat

bar.





full side door. Right Hand glass as standard on canopy and cab builds.




JCB 190 SKID STEER LOADEREFFECTIVE: OCTOBER 1,

2013

Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 7.5 mph in both forward

and reverse. Optional Creep speed provides operation from 0 - 1/2 of full speed for special

applications. An optional two speed transmission is available providing a low range of 0 - 7.5

mph and a high range of 0 - 11.5 mph.

2.5L (151.4CID) 62 SAE Gross hp, Kohler KDI 2504 TCR engine, centrifugal dry type dual

stage air cleaner. Fuel filter with water separator; 1000 CCA battery; variable speed

hydraulically driven fan.



PRICE PAGES

F.O.B.







881B206

881B226


881C205

881D301 GP Bucket - 66" - 14.1 cu-ft




881F206













Joystick Option)


Quickhitch. - 4 CYL



F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)













Canopy Packages

881B205 $642

881B206 $709


881B215 $2,561

881B216 $2,627


881B225 $4,246

881B226 $4,312


881C202 $1,061

881C205 $1,618








Enclosed Cab, Heater w A/C, Wiper & Sliding LH Window (Cannot order options with this package - High

Flow, SRS, Powered Quickhitch, Dual Pattern Control, Reversing Fan and Roadlights) - 4 CYL


Quickhitch. - 4 CYL










F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D347 GP Bucket - 60" - 12.7 cu-ft $947

881D301 GP Bucket - 66" - 14.1 cu-ft $962

881D340 GP Bucket - 68" - 14.3 cu-ft $1,004





Landscape Buckets





6 in 1 Buckets





Pallet Forks






F.O.B.

SAVANNAH,

GA

U.S. LIST










Electrical Options










Loader Options





Hydraulic Options





















881G236 $670

881G310 $438

881G258 $187

881G212 $694

881G297 $231

881G229 $134



Twine Cutter - Wheeled Machines Only



U.S. DOLLAR






F.O.B.

SAVANNAH,

GA

U.S. LIST


881G240 Tool Kit- Basic $322

881G241 Tool Kit- Full $478







881G214 $2,009

881G215 $3,348

881G216 $3,014

881G251 $2,281

881G252 $996

881G261 $1,906

881G262 $3,240

881G263 $2,903

881G264 $2,785

881G265 $4,178

881G266 $3,851

881G267 $1,106

881G307 $514

BUCKET ACCESSORIES
















order G208








order G208

Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh

to provide protection over laminated cab glass (Not for Canopy Builds)







A/C FOPS Guard




F.O.B.

SAVANNAH,

GA




Snow Buckets






881U670 72" Snow Push 333/L5629 $3,054

Grapple Attachments








Hammers



Auger Drive Units












PART NUMBER




F.O.B.

SAVANNAH,

GA
















Auger Extensions









PART NUMBER




F.O.B.

SAVANNAH,

GA





881U532 Bale Spear 333/L5627 $821

Trenchers




Stump Grinders



Cold Planers






PRICE PAGES

PART NUMBER





190TNEW GENERATION




MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH,

GA

STANDARD EQUIPMENT

ENGINE

TRANSMISSION

RUBBER TRACKS

BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

LOADER

SERVICEABILITY


2013 JCB 190T COMPACT TRACK LOADER




bar.

2.5L (151.4CID) 62 SAE Gross hp, Kohler KDI 2504 TCR engine, centrifugal dry type dual

stage air cleaner. Fuel filter with water separator; 1000 CCA battery; variable speed



Cab tilts forward to provide further access to the hydraulic components. Rear door provides

access to engine bay and daily maintenance and check points.





Rated Operating Capacity of 1900 lbs, Vertical Lift Loader Design provides vertical lift path and





SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat

with seatbelt and operator restraint interlock for drive and loader functions.

Cab units are pressurized and available with heat or heat and A/C, sliding left

window and full side door. Right Hand glass as standard on canopy and cab

builds.


and reverse. Optional Creep speed provides operation from 0 to 1/2 of full speed for special

applications. An optional two (2) speed transmission is available providing a low range of 0 -

5.6 mph and a high range of 0 - 7.8 mph

Fitted with 12.6" (320mm) wide tracks provide a machine with of 66" and a ground bearing

pressure of 6.2 psi.



PRICE PAGES

F.O.B.





8611 JCB 190T Tier 4 Tracked, Vertical Lift, New Generation, Compact Tracked Loader


881B236

881B256


881C205

881D301 GP Bucket - 66" - 14.1 cu-ft




881F206












Joystick Option)


Quickhitch. - 4 CYL



F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)

8611 JCB 190T Tier 4 Tracked, Vertical Lift, New Generation, Compact Tracked Loader $45,479

TRACKS (E)



Canopy Packages

881B235 $618

881B236 $684


881B245 $2,495

881B246 $2,561


881B255 $4,246

881B256 $4,312


881C202 $1,061

881C205 $1,618





JCB 190T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013










Quickhitch. - 4 CYL







F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D301 GP Bucket - 66" - 14.1 cu-ft $962

881D340 GP Bucket - 68" - 14.3 cu-ft $1,004

881D302 GP Bucket - 72" - 15.4 cu-ft $1,043







Landscape Buckets







6 in 1 Buckets







Pallet Forks






F.O.B.

SAVANNAH,

GA

U.S. LIST










Electrical Options










Loader Options





Hydraulic Options




















881G237 $569

881G310 $438

881G258 $187

881G212 $694

881G297 $231



Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting

the full left side door

U.S. DOLLAR






F.O.B.

SAVANNAH,

GA

U.S. LIST










881G214 $2,009

881G215 $3,348

881G216 $3,014

881G251 $2,281

881G252 $996

881G261 $1,906

881G262 $3,240

881G263 $2,903

881G264 $2,785

881G265 $4,178

881G266 $3,851

881G267 $1,106

881G307 $514

BUCKET ACCESSORIES

















Only


must order G208




must order G208





ordered





Only

A/C FOPS Guard






F.O.B.

SAVANNAH,

GA




Snow Buckets










881U670 72" Snow Push 333/L5629 $3,054

Grapple Attachments









Hammers



Auger Drive Units












PART NUMBER




F.O.B.

SAVANNAH,

GA
















Auger Extensions













PART NUMBER




F.O.B.

SAVANNAH,

GA





881U532 Bale Spear 333/L5627 $821

Trenchers




Stump Grinders



Cold Planers





EFFECTIVE: October 1, 2013 JCB 190T COMPACT TRACK LOADERU.S. DOLLAR

PRICE PAGES

PART NUMBER





205NEW GENERATION


EFFECTIVE: OCTOBER, 2013


MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH,

GA

STANDARD EQUIPMENT

ENGINE

TRANSMISSION


BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

SERVICEABILITY


2.5L (151.4CID) 62 SAE Gross hp, Kohler KDI 2504 TCR engine, centrifugal

dry type dual stage air cleaner. Fuel filter with water separator; 1000 CCA

battery; variable speed hydraulically driven fan.

EFFECTIVE: OCTOBER, 2013


and reverse. Optional Creep speed provides operation from 0 - 1/2 of full speed for special

applications. An optional two speed transmission is available providing a low range of 0 - 7.5

mph and a high range of 0 - 11.5 mph.




bar.













full side door. Right Hand glass as standard on canopy and cabs.



check points.



LOADER



PRICE PAGES

F.O.B.

SAVANNAH, GAEFFECTIVE: OCTOBER, 2013






881B206

881B226


881C205

881D301 GP Bucket - 66" - 14.1 cu-ft




881F206













Joystick Option)


Quickhitch. - 4 CYL



F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)













Canopy Packages

881B205 $642

881B206 $709


881B215 $2,561

881B216 $2,627


881B225 $4,246

881B226 $4,312


881C202 $1,061

881C205 $1,618JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness.




Quickhitch. - 4 CYL












Enclosed Cab, Heater w A/C, Wiper & Sliding LH Window (Cannot order options with this package - High

Flow, SRS, Powered Quickhitch, Dual Pattern Control, Reversing Fan and Roadlights) - 4 CYL



F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D347 GP Bucket - 60" - 12.7 cu-ft $947

881D301 GP Bucket - 66" - 14.1 cu-ft $962

881D340 GP Bucket - 68" - 14.3 cu-ft $1,004





Landscape Buckets





6 in 1 Buckets





Pallet Forks






F.O.B.

SAVANNAH,

GA

U.S. LIST










Electrical Options










Loader Options





Hydraulic Options





















881G236 $670








U.S. DOLLAR




F.O.B.

SAVANNAH,

GA

U.S. LIST










881G214 $2,009

881G215 $3,348

881G216 $3,014

881G251 $2,281

881G252 $996

881G261 $1,906

881G262 $3,240

881G263 $2,903

881G264 $2,785

881G265 $4,178

881G266 $3,851

881G267 $1,106

881G307 $514

BUCKET ACCESSORIES

















Only


must order G208




must order G208





ordered





Only

A/C FOPS Guard






F.O.B.

SAVANNAH,

GA




Snow Buckets






881U670 72" Snow Push 333/L5629 $3,054

Grapple Attachments








Hammers



Auger Drive Units












PART NUMBER




F.O.B.

SAVANNAH,

GA
















Auger Extensions









PART NUMBER




F.O.B.

SAVANNAH,

GA





881U532 Bale Spear 333/L5627 $821

Trenchers




Stump Grinders



Cold Planers






PRICE PAGES

PART NUMBER





205TNEW GENERATION




MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH,

GA

STANDARD EQUIPMENT

ENGINE

TRANSMISSION

RUBBER TRACKS

BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

LOADER

SERVICEABILITY



SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat

with seatbelt and operator restraint interlock for drive and loader functions.

Cab units are pressurized and available with heat or heat and A/C, sliding left

window and full side door. Right Hand glass as standard on canopy and cab

builds.




bar.

Fitted with 12.6" (320mm) wide tracks provide a machine with of 66" and a ground bearing

pressure of 6.5 psi.


and reverse. Optional Creep speed provides operation from 0 to 1/2 of full speed for special

applications. An optional two (2) speed transmission is available providing a low range of 0 -

5.6 mph and a high range of 0 - 7.8 mph





2.5L (151.4CID) 62 SAE Gross hp, Kohler KDI 2504 TCR engine, centrifugal

dry type dual stage air cleaner. Fuel filter with water separator; 1000 CCA

battery; variable speed hydraulically driven fan.


access to engine bay and daily maintenance and check points.









PRICE PAGES

F.O.B.





8612 JCB 205T Tier 4Tracked, Vertical Lift, New Generation, Compact Tracked Loader


881B236

881B256


881C205

881D301 GP Bucket - 66" - 14.1 cu-ft




881F206

881G225 Engine Block Heater- 110V











Joystick Option)


Quickhitch. - 4 CYL



F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)

8612 JCB 205T Tier 4Tracked, Vertical Lift, New Generation, Compact Tracked Loader $48,615

TRACKS (E)



Canopy Packages

881B235 $618

881B236 $684


881B245 $2,495

881B246 $2,561


881B255 $4,246

881B256 $4,312


881C202 $1,061

881C205 $1,618








JCB 205T COMPACT TRACK LOADER EFFECTIVE: October 1, 2013










Quickhitch. - 4 CYL




F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D301 GP Bucket - 66" - 14.1 cu-ft $962

881D340 GP Bucket - 68" - 14.3 cu-ft $1,004

881D302 GP Bucket - 72" - 15.4 cu-ft $1,043







Landscape Buckets







6 in 1 Buckets







Pallet Forks






F.O.B.

SAVANNAH,

GA

U.S. LIST










Electrical Options










Loader Options





Hydraulic Options




















881G237 $569





Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G258 (Right Hand Mesh) also be ordered when getting the full

left side door

U.S. DOLLAR




F.O.B.

SAVANNAH,

GA

U.S. LIST












881G214 $2,009

881G215 $3,348

881G216 $3,014

881G251 $2,281

881G252 $996

881G261 $1,906

881G262 $3,240

881G263 $2,903

881G264 $2,785

881G265 $4,178

881G266 $3,851

881G267 $1,106

881G307 $514

BUCKET ACCESSORIES


















order G208




order G208

Enclosed Cab Additional Protection Package - Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to

provide protection over laminated cab glass (Not for Canopy Builds)




Bars - Cab Machines Only



A/C FOPS Guard


Bars - Canopy Machines Only




F.O.B.

SAVANNAH,

GA














881U670 72" Snow Push 333/L5629 $3,054

Grapple Attachments









Hammers



Auger Drive Units












PART NUMBER




F.O.B.

SAVANNAH,

GA
















Auger Extensions













PART NUMBER




F.O.B.

SAVANNAH,

GA





881U532 Bale Spear 333/L5627 $821

Trenchers




Stump Grinders



Cold Planers





EFFECTIVE: October 1,


U.S. DOLLAR

PRICE PAGES

PART NUMBER





225NEW GENERATION



EFFECTIVE: MAY, 2013


MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GAEFFECTIVE: MAY, 2013

STANDARD EQUIPMENT

Engine

Transmission

Tires: Front & Rear

Brakes

Electrical

Instruments

Cab or Canopy

Hydraulics

Loader

Serviceability


Servo Controls with hydrostatic transmission. Optional Creep Speed provides operation from 0

to 1/2 of full speed for special applications. An optional two (2) speed transmission is available

providing a low range of 0 - 6.8 mph and a high range of 0 - 12.4 mph.

4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner.

Fuel filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.

12 x 16.5 10 ply, Heavy Duty JCB Tires providing 67.9" width.

Rated Operating Capacity of 2225 lbs, Radial Lift Loader Design provides for maximum loader lift

breakout force for superior digging performance. Auxiliary circuit is standard for operation of

hydraulic powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch.

Hydraulic float standard on all models. Loader options include: Parallel Lift in raise only, SRS

(smooth ride system) left hand auxiliary pipework.

Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple

disc, oil immersed, spring applied hydraulic release that provides a fail safe with engine off.

Electrically activated through a switch on the instrument panel or by raising seat bar.


class leading access to engine bay and daily maintenacne and check points.

Meets IP69 water ingress standard. Worklights, 2 Front and 1 Rear, Reverse Alarm, Horn, and

12V Accessory Socket.

Audible and visual warning systems, right and left side mounted instrument panels. Standard

electronic throttle control with optional foot throttle.

SAE certified ROPS/FOPS, left side entry. Vinyl seat with retractable seatbelt and operator

restraint interlock for drive and loader functions. Cab units are pressurized and available with

heat or heat and A/C, sliding left window, and full side door. Right Hand glass standard on canopy

and cab builds.

24gpm @ 3335psi standard flow. Optional 33gpm @ 3335psi available.



PRICE PAGES

F.O.B.





8605 JCB 225 Wheeled, Radial Lift, New Generation, Skid Steer Loader

881A302 12 X 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width)

881B309 Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch

881B329

881C311 JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics

881C312

881D302 GP Bucket - 72" - 15.4 cu-ft



881F307 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR)

881F308


881G084 Foot Throttle

881G091 Vinyl Air Suspension Seat

881G095 Parallel Lift Radial Lift Models - 225 & 225T

881G073 2 Speed - Wheeled Machines

881G077 Smooth Ride System (SRS)



Manual Lock Quickhitch


Required if High Flow ordered.

High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option

881C312)

Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page

does not meet your requirements, please order a machine using the Custom Build Sections following.


F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)

8605 JCB 225 Wheeled, Radial Lift, New Generation, Skid Steer Loader $38,022


881A301 12 X 16.5 10PR HD Tires and Wheels (provides 67.9" width) $0

881A302 12 X 16.5 10PR HD Wide Track Tires and Wheels (provides 71.7" width) $54

881A305 12 X 16.5 10PR Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 67.9" width) $814

881A306 12 X 16.5 10PR Wide Track Lifemaster Industrial Pneumatic Track Tires and Wheels (provides 71.7" width) $857

881A307 33/15.5 X 16.5 14PR SK Hauler High Floatation Tires and Wheels (provides 72" width) $1,018

881A308 8 X 16 Solid Industrial Tires and Wheels (provides 63" width) $1,607

881A309 12 X 16.5 Brawler Solid Flex Industrial Tires and Wheels (provides 66" width) $2,410

881A316 12 X 16.5 Slick Brawler Solid Flex Industrial $2,544


Canopy Packages

881B308 $804

881B309 $872


881B318 $2,756

881B319 $2,823


881B328 $4,576

881B329 $4,645


881C311 JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics $1,070

881C312 $1,616


JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required if

High Flow ordered.


Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch.

(Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)

Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual Lock

Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)

Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual

Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and Roadlights)

Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock Quickhitch

Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock

Quickhitch

Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock

Quickhitch



F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D301 GP Bucket - 66" - 14.1 cu-ft $962

881D340 GP Bucket - 68" - 14.3 cu-ft $1,004

881D302 GP Bucket - 72" - 15.4 cu-ft $1,043

881D341 GP Bucket - 75" - 15.8 cu-ft $1,093

881D303 GP Bucket - 78" - 16.7 cu-ft $1,135

881D304 GP Bucket - 84" - 18.1 cu-ft $1,506













Landscape Buckets




881D308 Landscape Bucket - 84" 22.7 cu-ft $1,402









6 in 1 Buckets



881D311 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft $4,295




881D325 6 In 1 Multipurpose Bucket - 78" - 21.7 cu-ft with Pallet Fork Frame, LBR, 42" Tines $5,927






Pallet Forks



U.S. DOLLAR PRICE PAGES JCB 225 SKID STEER LOADER EFFECTIVE: MAY, 2013

To complete a machine order, select one code from each E (Essential) feature category below.

Select Options and/or Attachments from pages 5 to 9.


F.O.B.

SAVANNAH,

GA

U.S. LIST







881F307 Standard Auxiliary Hydraulics - 24gpm at 3335 psi (87.1 lpm /230 BAR) $0

881F308 $1,232


Electrical Options

881G078 Roadlight Kit with Brake lights for non A/C machines $889

881G079 Roadlight Kit with Brake lights for A/C machines $889

881G089 Grid Heater for Canopy builds (Starting aid) $129

881G025 Engine Block Heater- 110V $134




881G096 ISO & Dual Hand Control Pattern Changeover $558


Loader Options

881G077 Smooth Ride System (SRS) $1,005

881G095 Parallel Lift Radial Lift Models - 225 & 225T $514

Hydraulic Options

881G073 2 Speed - Wheeled Machines $1,517


881G102 $525

881G103 $525

881G075 Electric Quick Hitch $803


881G084 Foot Throttle $204







881G009 Impact Protection - Lexan Screen - for Canopy or Cab builds $1,692

881G106 Impact Protection - Laminated Glass with windshield wiper - for Canopy builds - Tier 4 $857

881G107 Laminate glass to replace tempered glass as standard on cab builds ONLY - Tier 4 $124

881G071 Front Mesh Guard for canopy machines (NO front glass required) $673

881G091 Vinyl Air Suspension Seat $616

881G019 Cloth Air Suspension Seat $696

881G105 Mechanical Suspension Seat $240

881G020 3 inch Seatbelt $59

881G042 3 inch, 3 Point Seat Belt. Recommended for 2 Speed Option $268


881G022 Radio with Speakers and Aerial $300

881G036 $670


Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting

the full left side door.

Auxiliary Hydraulic Coupler Placement- Left Hand Side (Not compatible with High Flow Option)

Auxiliary Coupler Placement Left hand Side with 14 Pin Connector - Compatible with Multi-function Joysticks (not compatible with High Flow)

U.S. DOLLAR

PRICE PAGES JCB 225 SKID STEER LOADER EFFECTIVE: MAY, 2013

High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312)



F.O.B.

SAVANNAH,

GA

U.S. LIST



881G029 Twine Cutter - wheeled machines only $134

881G083 Tool Kit - Basic $322

881G098 Tool Kit - Full $478


881G087 Canopy Wheeled Fender & Fuel Cap Protection $120

881G088 Cab Wheeled Fender & Fuel Cap Protection $120


881G014 $2,009

881G015 $3,348

881G016 $3,014

881G051 $2,281

881G052 $996

881G061 $1,906

881G062 $3,240

881G063 $2,903

881G064 $2,785

881G065 $4,178

881G066 $3,851

881G070 $1,005

881G072 $514

BUCKET ACCESSORIES

881H301 Bolt on Edge For 66" Bucket (1676mm) $293






881H305 Tooth Bar for 66" Bucket - over Bucket (1676mm) $619



881H317 Tooth Bar for 75" bucket - over bucket (1905mm) $664



881H309 Tooth Bar for 66" Bucket - over Bolt on Edge (1676mm) $619



881H318 Tooth Bar for 75" bucket - over bolt on edge (1905mm) $664





PRICE PAGES




Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Front Screen Guard - Canopy machines must order G008

Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Canopy machines only

Forestry Package - Includes Level 2 FOPS Guard, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines must order G008

Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide

protection over laminated cab glass.

Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over

laminated cab glass.

Waste and Recycling Protection Package - Includes Level 2 FOPS Guard, Lexan Front Screen - Cab machines only


Cab machines only

Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only

A/C FOPS Guard


Canopy machines only

Forestry Package - Includes Level 2 FOPS Guard, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines only

Heavy Duty Rear Bars for Adverse Applications



F.O.B.

SAVANNAH,

GA



881U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 332/L1830 $1,949

881U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 332/L1831 $1,817

881U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 332/L1834 $2,120

881U217 Bolt on Edge for 96" Extra High Capacity / Light Material Buckets (2438mm) 334/L5922 $438

Snow Buckets

881U680 84" Medium Duty Snow Bucket / 30.8 cu. ft. Capacity 332/X4311 $1,776


881U682 96" Heavy Duty Snow Bucket / 49.4 cu. ft. Capacity 332/X4313 $2,952


881U215 Bolt on Edge for 96" Snow Bucket (2438mm) 334/L5920 $573


Grapple Attachments







881U248 72" Pick-Up Sweeper 334/P2836 $6,775


881U300 Angle broom - 72" with manual angle adjustment link 332/L3992 $6,124


881U302 Hydraulic angle kit for 72" or 84" Angle Broom 332/L3983 $1,358

Hammers


881U353 Mounting Bracket - Required for HM386Q Hammer 980/68700 $1,829

Auger Drive Units


881U401 Planetary Drive Auger - HIGH FLOW - (includes mounting bracket & hoses) 332/L3979 $5,548










EFFECTIVE: MAY, 2013 JCB 225 SKID STEER LOADER U.S. DOLLAR PRICE PAGES


Attachments designated as High Flow require Essential code 881F306, 882F308 or 881F310


F.O.B.

SAVANNAH,

GA
















Auger Extensions











881U506 66' Landscape Preparator - Standard Flow 332/L7252 $9,840

881U507 76" Landscape Preparator - Standard Flow 332/L3954 $13,152

881U508 66" Auto Rake - Standard Flow 332/L7253 $10,676


881U510 66" Tiller - 6 inch tines - HIGH FLOW 332/X4380 $5,450






Forestry Cutters

881U516 60" Forestry Cutting Head - HIGH FLOW 334/L8351 $26,416

Dozer Blades

881U518 84" Dozer Blade - 6 Way Hydraulic 332/X4285 $7,635





F.O.B.

SAVANNAH,

GA





881U552 96" Silage Defacer - Standard Flow 332/X4338 $6,055

881U532 Bale Spear 333/L5627 $821

Trenchers



881U522 48" Trencher with 6" wide chain, crumber and hoses - HIGH FLOW 332/X4290 $7,493

Brush Cutters

881U523 72" Brush Cutter - Standard Flow 332/X4291 $7,095

881U524 72" Brush Cutter - HIGH FLOW 332/X4292 $7,238

881U525 78' Brush Cutter - HIGH FLOW 332/X4293 $7,569

Stump Grinders



Cold Planers





Saws

881U611 Rock Saw - 18" Depth - HIGH FLOW 332/L7244 $19,952








881U656 96" Heavy Duty Snow Blade - Hydraulic Angle 332/L3915 $5,093







881U670 72" Snow Push 333/L5629 $3,054

881U671 84" Snow Push 333/L5640 $3,147

881U672 96" Snow Push 333/L5646 $3,548

EFFECTIVE: MAY, 2013 JCB 225 SKID STEER LOADERU.S. DOLLAR

PRICE PAGES





225TNEW GENERATION





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH,

GA

STANDARD EQUIPMENT

Engine

Transmission

Rubber Tracks:

Brakes

Electrical

Instruments

Cab or Canopy

Hydraulics

Loader

Serviceability


Fitted with 12.6" (320mm) wide tracks provide a machine with of 73" and a

ground bearing pressure of 4.8 psi. Optional 17.7' (450mm) wide tracks reduce

ground bearing pressure to 4.36 psi.

Servo Controls with hydrostatic transmission. Travel Speeds of 0 to 6.8 mph in

both forward and reverse. Optional Creep Speed provides operation from 0 to

50% of full speed for special applications. An optional two (2) speed

transmission is available providing a low range of 0 - 6.8 mph and a high range of

0 - 12.4 mph.

EFFECTIVE: MAY 1, 2013 JCB 225T COMPACT TRACK LOADER


door provides class leading access to engine bay and daily maintenacne and

check points.

4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual

stage air cleaner. Fuel filter with water separator; 1000 CCA battery; variable

speed hydraulically driven fan.

Meets IP69 water ingress standard. Worklights, 2 Front and 1 Rear, Reverse




SAE certified ROPS/FOPS, left side entry. Mechancial vinyl suspension seat with

retractable seatbelt and operator restraint interlock for drive and loader

functions. Cab units are pressurized and available with heat or heat and A/C,

sliding left window, and full side door. Right Hand glass standard on canopy and

cab builds.

Machine braking provided through the hydrostatic transmission. Parking brake

consists of multiple disc, oil immersed, spring applied hydraulic release that

provides a fail safe with engine off. Electrically activated through a switch on the

instrument panel or by raising seat bar.


maximum loader lift breakout force for superior digging performance. Auxiliary

circuit is standard for operation of hydraulic powered attachments. Choice of

Standard Mechanical or Optional Electric Quick Hitch. Hydraulic float standard

on all models. Loader options include: Parallel Lift in raise only, SRS (smooth

ride system) left hand auxiliary pipework.



PRICE PAGES

F.O.B.





8613 JCB 225T Tracked, Radial Lift, New Generation, Compact Tracked Loader

881A321 12.6 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 73"


881B359

881C311

881C312

881D341




881F308

881G025


881G095 Parallel Lift Radial Lift Models - 225 & 225T

881G074 2 Speed - Tracked Machines



JCB Servo Controls - 3 way Joysticks with Auxiliary Hydraulics

GP Bucket - 75" - 15.8 cu-ft

Engine Block Heater- 110V






881C312)




F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)

8613 JCB 225T Tracked, Radial Lift, New Generation, Compact Tracked Loader $50,276

TRACKS (E)

881A321 12.6 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 73" In Base

881A322 17.7 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 78" $803


Canopy Packages

881B338 $804

881B339 $872


881B348 $2,756

881B349 $2,823


881B358 $4,576

881B359 $4,645


881C311 $1,070

881C312 $1,616

JCB 225T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013

JCB Servo Controls - 7 way Multi-Function Joysticks with Auxiliary Hydraulics & Attachment Harness. Required if High

Flow ordered.










Quickhitch


Quickhitch



F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D341 GP Bucket - 75" - 15.8 cu-ft $1,093

881D303 GP Bucket - 78" - 16.7 cu-ft $1,135

881D304 GP Bucket - 84" - 18.1 cu-ft $1,506







LANDSCAPE BUCKETS







6 IN 1 Buckets





Pallet Forks



U.S. DOLLAR PRICE PAGES JCB 225T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013




F.O.B.

SAVANNAH,

GA

U.S. LIST








881F308 $1,232


Electrical Options










Loader Options


881G095 Parallel Lift Radial Lift Models - 225 & 225T $514

Hydraulic Options

881G074 2 Speed - Tracked Machines $1,517


881G102 $525

881G103 $525




















881G037 $569


Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side

door.



U.S. DOLLAR

PRICE PAGES JCB 225T COMPACT TRACK LOADER EFFECTIVE: MAY, 2013




F.O.B.

SAVANNAH,

GA

U.S. LIST






881G100 Canopy Tracked Fender & Fuel Cap Protection $120

881G101 Cab Tracked Fender & Fuel Cap Protection $120


881G014 $2,009

881G015 $3,348

881G016 $3,014

881G051 $2,281

881G052 $996

881G061 $1,906

881G062 $3,240

881G063 $2,903

881G064 $2,785

881G065 $4,178

881G066 $3,851

881G070 $1,005

881G072 $514

BUCKET ACCESSORIES











Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines

only


Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide protection over


Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass.

A/C FOPS Guard


Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Canopy

machines only





PRICE PAGES

Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars - Canopy







F.O.B.

SAVANNAH,

GA



881U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 332/L1829 $2,176





Snow Buckets







Grapple Attachments










Hammers



Auger Drive Units












EFFECTIVE: MAY, 2013 JCB 225T COMPACT TRACK LOADER U.S. DOLLAR PRICE PAGES

PART NUMBER




F.O.B.

SAVANNAH,

GA
















Auger Extensions




















Forestry Cutters


Dozer Blades


881U519 96" Dozer Blade - 6 Way Hydraulic 332.X4287 $7,637


PART NUMBER




F.O.B.

SAVANNAH,

GA





881U532 Bale Spear 333/L5627 $821

Trenchers




Brush Cutters




Stump Grinders



Tree Spades

881U602 Tree Spade with Blades / 25 degree cutting angle / 18" - 26" ball diameter 332/X4296 $10,962



Cold Planers





Saws










881U670 72" Snow Push 333/L5629 $3,054

881U671 84" Snow Push 333/L5640 $3,147

881U672 96" Snow Push 333/L5646 $3,548

EFFECTIVE: MAY, 2013 JCB 225T COMPACT TRACK LOADERU.S. DOLLAR

PRICE PAGES

PART NUMBER





260NEW GENERATION





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE

TRANSMISSION


BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

SERVICEABILITY


Meets IP69 (external) IP67 (internal) water ingress standard. Worklights, 2 Front and 1 Rear, Reverse



Audible and visual warning systems, right and left side mounted instrument panels. Standard electronic

throttle control with optional foot throttle.

Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc, oil

immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically activated

through a switch on the instrument panel or by raising seat bar.

Rated Operating Capacity of 2600 lbs, Vertical Lift Loader Design provides vertical lift path and increased

reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic powered

attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic Float standard on

all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride system), left hand auxiliary

pipework.

LOADER

4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner; Fuel

filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.


reverse. Optional Creep speed provides operation from 0 - 1/2 of full speed for special applications. An

optional two speed transmission is available providing a low range of 0 - 6.8 mph and a high range of 0 -

12.4 mph


SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and operator restraint interlock for

drive and loader functions. Cab units are pressurized and available with heat or heat and A/C, sliding left

window and full side door. Right Hand glass standard on canopy and cab builds.

Cab tilts forward to provide further access to the hydraulic components. Rear door provides class

leading access to engine bay and daily maintenance and check points.



PRICE PAGES

F.O.B.





8606 JCB 260 Wheeled, Vertical Lift, New Generation, Skid Steer Loader



881B329


881C312

881D302 GP Bucket - 72" - 15.4 cu-ft




881F306




881G094 Parallel Lift Vertical Lift Models - 260 & 280









881C312)




F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)

8606 JCB 260 Wheeled, Vertical Lift, New Generation, Skid Steer Loader $39,227











Canopy Packages

881B308 $804

881B309 $872


881B318 $2,756

881B319 $2,823


881B328 $4,576

881B329 $4,645



881C312 $1,616

JCB 260 SKID STEER LOADER EFFECTIVE: MAY, 2013


Flow ordered.







Quickhitch




Quickhitch


Select Options and Attachments as required.


F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D302 GP Bucket - 72" - 15.4 cu-ft $1,043

881D341 GP Bucket - 75" - 15.8 cu-ft $1,093

881D303 GP Bucket - 78" - 16.7 cu-ft $1,135

881D304 GP Bucket - 84" - 18.1 cu-ft $1,506









Landscape Buckets










6 IN 1 Buckets










Pallet Forks







F.O.B.

SAVANNAH,

GA

U.S. LIST








881F306 High Flow Hydraulics - 33gpm at 3335 psi (135 lpm/230 BAR)(requires 7 way Multi-Function Joystick option 881C312) $1,232


Electrical Options










Loader Options


881G094 Parallel Lift Vertical Lift Models - 260 & 280 $514

Hydraulic Options



881G102 $525

881G103 $525





















881G036 $670


Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be

ordered when getting the full left side door.

U.S. DOLLAR


Auxiliary Coupler Placement Left hand Side with 14 Pin Connector - Compatible with Multi-function Joysticks (not

compatible with High Flow)




F.O.B.

SAVANNAH,

GA

U.S. LIST










881G014 $2,009

881G015 $3,348

881G016 $3,014

881G051 $2,281

881G052 $996

881G061 $1,906

881G062 $3,240

881G063 $2,903

881G064 $2,785

881G065 $4,178

881G066 $3,851

881G070 $1,005

881G072 $514

BUCKET ACCESSORIES














Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to

provide protection over laminated cab glass.


PRICE PAGES




G008


G008






Bars - Cab machines only



A/C FOPS Guard


Bars - Canopy machines only





F.O.B.

SAVANNAH,

GA








Snow Buckets







Grapple Attachments












Hammers



Auger Drive Units













PART NUMBER




F.O.B.

SAVANNAH,

GA
















Auger Extensions











881U506 66' Landscape Preparator - Standard Flow $9,840

881U507 76" Landscape Preparator - Standard Flow $13,152

881U508 66" Auto Rake - Standard Flow $10,676

881U509 76" Auto Rake - Standard Flow $10,067

881U510 66" Tiller - 6 inch tines - HIGH FLOW $5,450

881U511 78" Tiller - 6 inch tines - HIGH FLOW $6,510

881U512 73" Vibratory Roller - Smooth Drum $10,018

881U513 84" Vibratory Roller - Smooth Drum $10,604

881U514 73" Vibratory Roller - Padded Drum $10,825

881U515 84" Vibratory Roller - Padded Drum $11,375

Forestry Cutters

881U516 60" Forestry Cutting Head - HIGH FLOW $26,416

Dozer Blades

881U518 84" Dozer Blade - 6 Way Hydraulic $7,635332/X4285

332/L7237

332/L3951

332/L7247

332/L7248

332/X4282

332/L3939

332/L3960

332/L7252

332/L3954

332/L7253

980/L7251

980/L7257

332/X4284

334/L8351

980/L7271

980/L7272

332/X4283

980/A3001

980/A2031

980/A2034

332/L3947

332/X4281

332/X4380

980/A2035

980/A2037

980/A2038

332/X4381

980/L7267

980/L7273

980/L7270

JCB 260 SKID STEER LOADER U.S. DOLLAR PRICE PAGES

PART NUMBER


980/A2039

980/A2032




F.O.B.

SAVANNAH,

GA






881U532 Bale Spear 333/L5627 $821

Trenchers




Brush Cutters




Stump Grinders



Cold Planers





Saws
















881U670 72" Snow Push 333/L5629 $3,054


PRICE PAGES

PART NUMBER





260TNEW GENERATION





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH,

GA

STANDARD EQUIPMENT

ENGINE

TRANSMISSION

RUBBER TRACKS

BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

LOADER

SERVICEABILITY


increased reach at full lift vs. Radial Lift Designs. Auxiliary circuit is standard for operation of hydraulic

powered attachments. Choice of Standard Mechanical or Optional Electric Quick Hitch. Hydraulic

Float standard on all models. Loader Options include: Parallel Lift in raise only, SRS (smooth ride

system), left hand auxiliary pipework.

EFFECTIVE: MAY 1, 2013 JCB 260T COMPACT TRACK LOADER


Cab tilts forward to provide further access to the hydraulic components. Rear door provides access

to engine bay and daily maintenance and check points.

Audible and visual warning systems, right and left side mounted instrument panels.

Standard electronic throttle control with optional foot throttle.



SAE certified ROPS/FOPS, left side entry. Mechanical vinyl suspension seat with

seatbelt and operator restraint interlock for drive and loader functions. Cab units

are pressurized and available with heat or heat and A/C, sliding left window and full

side door. Right Hand glass standard on canopy and cab builds.

Fitted with 17.7" wide tracks provide a machine width of 78" and a ground bearing pressure

of 4.6 psi.

Machine braking provided through the hydrostatic transmission. Parking brake consists of multiple disc,

oil immersed, spring applied hydraulic release that provides a fail safe with the engine off. Electrically

activated through a switch on the instrument panel or by raising seat bar





4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner. Fuel

filter with water separator, 1000 CCA battery; variable speed hydraulically driven fan.



PRICE PAGES

F.O.B.





8614 JCB 260T Tracked, Vertical Lift, New Generation, Compact Tracked Loader



881B359

881C311

881C312

881D303




881F306

881G025


881G097 Parallel Lift Vertical Lift Model - 260T











881C312)





F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)

8614 JCB 260T Tracked, Vertical Lift, New Generation, Compact Tracked Loader $53,065

TRACKS (E)

881A321 12.6 in. Wide Solideal Rubber Tracks - provides an overall Machine width of 73" In Base



Canopy Packages

881B338 $804

881B339 $872


881B348 $2,756

881B349 $2,823


881B358 $4,576

881B359 $4,645


881C311 $1,070

881C312 $1,616


Quickhitch



Quickhitch



Flow ordered.











F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D303 GP Bucket - 78" - 16.7 cu-ft $1,135

881D304 GP Bucket - 84" - 18.1 cu-ft $1,506





Landscape Buckets







6 IN 1 Buckets







Pallet Forks







F.O.B.

SAVANNAH,

GA

U.S. LIST










Electrical Options










Loader Options


881G097 Parallel Lift Vertical Lift Model - 260T $514

Hydraulic Options



881G102 $525

881G103 $525




















881G037 $569


Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side door.

U.S. DOLLAR






F.O.B.

SAVANNAH,

GA

U.S. LIST









881G014 $2,009

881G015 $3,348

881G016 $3,014

881G051 $2,281

881G052 $996

881G061 $1,906

881G062 $3,240

881G063 $2,903

881G064 $2,785

881G065 $4,178

881G066 $3,851

881G070 $1,005

881G072 $514

BUCKET ACCESSORIES








Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Cab

machines only




Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated

cab glass.

A/C FOPS Guard








PRICE PAGES








F.O.B.

SAVANNAH,

GA







Snow Buckets







Grapple Attachments










Hammers



Auger Drive Units













PART NUMBER




F.O.B.

SAVANNAH,

GA
















Auger Extensions




















Forestry Cutters


Dozer Blades




PART NUMBER




F.O.B.

SAVANNAH,

GA





881U532 Bale Spear 333/L5627 $821

Trenchers




Brush Cutters




Stump Grinders



Tree Spades




Cold Planers





Saws










881U670 72" Snow Push 333/L5629 $3,054

881U671 84" Snow Push 333/L5640 $3,147

881U672 96" Snow Push 333/L5646 $3,548


PRICE PAGES

PART NUMBER





280NEW GENERATION





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH,

GA

STANDARD EQUIPMENT

ENGINE

TRANSMISSION


BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

SERVICEABILITY



activated through a switch on the instrument panel or by raising seat bar.
















SAE certified ROPS/FOPS, left side entry. Vinyl seat with seatbelt and operator



Hand glass standard on canopy and cab builds.

Cab tilts forward to provide further access to the hydraulic components. Rear door

provides class leading access to engine bay and daily maintenance and check points.

4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage

air cleaner; Fuel filter with water separator; 1000 CCA battery; variable speed


JCB 280 SKID STEER LOADER EFFECTIVE: MAY 1, 2013



PRICE PAGES

F.O.B.








881B329


881C312

881D302 GP Bucket - 72" - 15.4 cu-ft




881F306




881G094 Parallel Lift Vertical Lift Models - 260 & 280









881C312)

Select one of the following machine PACKAGE BUILD codes. If the Package Build combination shown on this page does not

meet your requirements, please order a machine using the Custom Build Sections following.


F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)












Canopy Packages

881B308 $804

881B309 $872


881B318 $2,756

881B319 $2,823


881B328 $4,576

881B329 $4,645



881C312 $1,616

Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual

Lock Quickhitch






Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock


Enclosed Cab Package - Includes Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a Manual

Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and

Roadlights)

Enclosed Cab Package - Includes A/C, Heater, Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and a

Manual Lock Quickhitch. (Cannot order options with this package - High Flow, SRS, Hydraulic Quickhitch and

Roadlights)

Canopy Package - Includes Vinyl Seat, Reverse Alarm, Hydraulic Loader Arm Float and Manual Lock

Quickhitch



F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D302 GP Bucket - 72" - 15.4 cu-ft $1,043

881D341 GP Bucket - 75" - 15.8 cu-ft $1,093

881D303 GP Bucket - 78" - 16.7 cu-ft $1,135

881D304 GP Bucket - 84" - 18.1 cu-ft $1,506









Landscape Buckets










6 in 1 Buckets










Pallet Forks







F.O.B.

SAVANNAH,

GA

U.S. LIST










Electrical Options










Loader Options


881G094 Parallel Lift Vertical Lift Models - 260 & 280 $514

Hydraulic Options



881G102 $525

881G103 $525





















881G036 $670


Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left

side door.



U.S. DOLLAR




F.O.B.

SAVANNAH,

GA

U.S. LIST


Other Options









881G014 $2,009

881G015 $3,348

881G016 $3,014

881G051 $2,281

881G052 $996

881G061 $1,906

881G062 $3,240

881G063 $2,903

881G064 $2,785

881G065 $4,178

881G066 $3,851

881G070 $1,005

881G072 $514

BUCKET ACCESSORIES















Cab machines only






A/C FOPS Guard








PRICE PAGES








F.O.B.

SAVANNAH,

GA








Snow Buckets







Grapple Attachments












Hammers



Auger Drive Units













PART NUMBER




F.O.B.

SAVANNAH,

GA
















Auger Extensions





















Forestry Cutters


Dozer Blades



PART NUMBER




F.O.B.

SAVANNAH,

GA






881U532 Bale Spear 333/L5627 $821

Trenchers




Brush Cutters




Stump Grinders



Cold Planers






Saws
















881U670 72" Snow Push 333/L5629 $3,054


PRICE PAGES

PART NUMBER





300NEW GENERATION





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH,

GA

STANDARD EQUIPMENT

ENGINE

TRANSMISSION


BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

SERVICEABILITY


















4.4L (268CID) 74 SAE Gross hp, JCB Ecomax engine, centrifugal dry type dual stage air cleaner; Fuel

filter with water separator; 1000 CCA battery; variable speed hydraulically driven fan.

SAE certified ROPS/FOPS, left side entry. Vinyls seat with seatbelt and operator



Hand glass standard on canopy and cab builds.




EFFECTIVE: MAY 1, 2013 JCB 300 SKID STEER LOADER



PRICE PAGES

F.O.B.








881B329


881C312

881D302 GP Bucket - 72" - 15.4 cu-ft




881F310




881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T, 320T









881C312)




F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)












Canopy Packages

881B308 $804

881B309 $872


881B318 $2,756

881B319 $2,823


881B328 $4,576

881B329 $4,645



881C312 $1,616


Quickhitch


Quickhitch



Flow ordered.











F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D302 GP Bucket - 72" - 15.4 cu-ft $1,043

881D341 GP Bucket - 75" - 15.8 cu-ft $1,093

881D303 GP Bucket - 78" - 16.7 cu-ft $1,135

881D304 GP Bucket - 84" - 18.1 cu-ft $1,506









Landscape Buckets










6 IN 1 Buckets










Pallet Forks







F.O.B.

SAVANNAH,

GA

U.S. LIST










Electrical Options










Loader Options


881G093 Parallel Lift Vertical Lift Models - 300, 330, 300T, 320T $514

Hydraulic Options



881G102 $525

881G103 $525





















881G036 $670


Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full

left side door.



U.S. DOLLAR




F.O.B.

SAVANNAH,

GA

U.S. LIST










881G014 $2,009

881G015 $3,348

881G016 $3,014

881G051 $2,281

881G052 $996

881G061 $1,906

881G062 $3,240

881G063 $2,903

881G064 $2,785

881G065 $4,178

881G066 $3,851

881G070 $1,005

881G072 $514

BUCKET ACCESSORIES















Cab machines only






A/C FOPS Guard








PRICE PAGES








F.O.B.

SAVANNAH,

GA








Snow Buckets







Grapple Attachments












Hammers



Auger Drive Units













PART NUMBER




F.O.B.

SAVANNAH,

GA
















Auger Extensions





















Forestry Cutters


Dozer Blades




PART NUMBER




F.O.B.

SAVANNAH,

GA






881U532 Bale Spear 333/L5627 $821

Trenchers




Brush Cutters




Stump Grinders



Cold Planers






Saws













881U670 72" Snow Push 333/L5629 $3,054


PRICE PAGES

PART NUMBER





300TNEW GENERATION





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH,

GA

STANDARD EQUIPMENT

ENGINE

TRANSMISSION

RUBBER TRACKS

BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

LOADER

SERVICEABILITY












air cleaner. Fuel filter with water separator, 1000 CCA battery; variable speed


Fitted with 17.7" wide tracks provide a machine width of 78" and a ground bearing pressure of 4.8 psi.


















PRICE PAGES

F.O.B.








881B359

881C311

881C312

881D303




881F310

881G025













881C312)





F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)


TRACKS (E)



Canopy Packages

881B338 $804

881B339 $872


881B348 $2,756

881B349 $2,823


881B358 $4,576

881B359 $4,645


881C311 $1,070

881C312 $1,616


Quickhitch


Quickhitch




Flow ordered.











F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D303 GP Bucket - 78" - 16.7 cu-ft $1,135

881D304 GP Bucket - 84" - 18.1 cu-ft $1,506





Landscape Buckets







6 in 1 Buckets







Pallet Forks







F.O.B.

SAVANNAH,

GA

U.S. LIST










Electrical Options










Loader Options



Hydraulic Options



881G102 $525

881G103 $525




















881G037 $569


Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left

side door.

U.S. DOLLAR






F.O.B.

SAVANNAH,

GA

U.S. LIST









881G014 $2,009

881G015 $3,348

881G016 $3,014

881G051 $2,281

881G052 $996

881G061 $1,906

881G062 $3,240

881G063 $2,903

881G064 $2,785

881G065 $4,178

881G066 $3,851

881G070 $1,005

881G072 $514

BUCKET ACCESSORIES








A/C FOPS Guard


PRICE PAGES










Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated

cab glass.

Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Cab

machines only








F.O.B.

SAVANNAH,

GA







Snow Buckets







Grapple Attachments










Hammers



Auger Drive Units













PART NUMBER




F.O.B.

SAVANNAH,

GA















Auger Extensions




















Forestry Cutters


Dozer Blades




PART NUMBER




F.O.B.

SAVANNAH,

GA





881U532 Bale Spear 333/L5627 $821

Trenchers




Brush Cutters




Stump Grinders



Tree Spades




Cold Planers






Saws











881U670 72" Snow Push 333/L5629 $3,054

881U671 84" Snow Push 333/L5640 $3,147

881U672 96" Snow Push 333/L5646 $3,548


PRICE PAGES

PART NUMBER





320TNEW GENERATION





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH,

GA

STANDARD EQUIPMENT

ENGINE

TRANSMISSION

RUBBER TRACKS

BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

LOADER

SERVICEABILITY












air cleaner. Fuel filter with water separator, 1000 CCA battery; variable speed


Fitted with 17.7" wide tracks provide a machine width of 78" and a ground bearing pressure of 4.9 psi.


















PRICE PAGES

F.O.B.








881B359

881C311

881C312

881D303

881E118



881F310

881G025













881C312)


North American English Manual - for Cab machine




F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)


TRACKS (E)



Canopy Packages

881B338 $804

881B339 $872


881B348 $2,756

881B349 $2,823


881B358 $4,576

881B359 $4,645


881C311 $1,070

881C312 $1,616


Quickhitch


Quickhitch




Flow ordered.











F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D303 GP Bucket - 78" - 16.7 cu-ft $1,135

881D304 GP Bucket - 84" - 18.1 cu-ft $1,506





Landscape Buckets







6 in 1 Buckets







Pallet Forks







F.O.B.

SAVANNAH,

GA

U.S. LIST








881F310 $1,232


Electrical Options










Loader Options



Hydraulic Options



881G102 $525

881G103 $525




















881G037 $569


Canopy Tracked Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side

door.



U.S. DOLLAR





F.O.B.

SAVANNAH,

GA

U.S. LIST









881G014 $2,009

881G015 $3,348

881G016 $3,014

881G051 $2,281

881G052 $996

881G061 $1,906

881G062 $3,240

881G063 $2,903

881G064 $2,785

881G065 $4,178

881G066 $3,851

881G070 $1,005

881G072 $514

BUCKET ACCESSORIES








A/C FOPS Guard

Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars

- Cab machines only


Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to

provide protection over laminated cab glass.




Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars

- Canopy machines only





PRICE PAGES





G008


G008



F.O.B.

SAVANNAH,

GA







Snow Buckets







Grapple Attachments










Hammers



Auger Drive Units













PART NUMBER




F.O.B.

SAVANNAH,

GA
















Auger Extensions




















Forestry Cutters


Dozer Blades




PART NUMBER




F.O.B.

SAVANNAH,

GA





881U532 Bale Spear 333/L5627 $821

Trenchers




Brush Cutters




Stump Grinders



Tree Spades




Cold Planers







Saws











881U670 72" Snow Push 333/L5629 $3,054

881U671 84" Snow Push 333/L5640 $3,147

881U672 96" Snow Push 333/L5646 $3,548


PRICE PAGES

PART NUMBER





330NEW GENERATION





MACHINE PRICE LIST

in U.S. Dollars

U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH,

GA

STANDARD EQUIPMENT

ENGINE

TRANSMISSION


BRAKES

ELECTRICAL

INSTRUMENTS

CAB OR CANOPY

HYDRAULICS

SERVICEABILITY



















reverse are obtained with standard two (2) speed transmission with a low range of 0 - 7.3 mph and a

high range of 0 - 13.5 mph. Standard creep speed provides operation from 0 - 1/2 of full speed for

special applications.

SAE certified ROPS/FOPS, left side entry. Vinyl mechanical suspension seat with





air cleaner; Fuel filter with water separator; 1000 CCA battery; variable speed





PRICE PAGES

F.O.B.






881A311 14 X 17.5 12 PR Heavy Duty Pneumatic Tires (provides 73.4" width)


881B329


881C312

881D341 GP Bucket - 75" - 15.8 cu-ft




881F310












881C312)




F.O.B.

SAVANNAH, GA

U.S. LIST

BASE MACHINE (E)



881A311 14 X 17.5 12 PR Heavy Duty Pneumatic Tires (provides 73.4" width) $696

881A312 14 X 17.5 12 Brawler Solid Flex Industrial Tire and Wheels (provides 73.4" width) $3,053


Canopy Packages

881B308 $804

881B309 $872


881B318 $2,756

881B319 $2,823


881B328 $4,576

881B329 $4,645



881C312 $1,616


Quickhitch


Quickhitch


Flow ordered.












F.O.B.

SAVANNAH,

GA

U.S. LIST


GP Buckets

881D341 GP Bucket - 75" - 15.8 cu-ft $1,093

881D303 GP Bucket - 78" - 16.7 cu-ft $1,135

881D304 GP Bucket - 84" - 18.1 cu-ft $1,506







Landscape Buckets







6 IN 1 Buckets







Pallet Forks







F.O.B.

SAVANNAH,

GA

U.S. LIST










Electrical Options









Loader Options



Hydraulic Options


881G102 $525

881G103 $525




















881G036 $670


Canopy Wheeled Full Door With Mesh (Replaces 1/2 Door) - It is suggested that 881G054 (Right Hand Mesh) also be ordered when getting the full left side

door.

U.S. DOLLAR






F.O.B.

SAVANNAH,

GA

U.S. LIST










881G014 $2,009

881G015 $3,348

881G016 $3,014

881G051 $2,281

881G052 $996

881G061 $1,906

881G062 $3,240

881G063 $2,903

881G064 $2,785

881G065 $4,178

881G066 $3,851

881G070 $1,005

881G072 $514

BUCKET ACCESSORIES











Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Cab machines only


Enclosed Cab Additional Protection Package. Includes Level 2 FOPS Guard and Left Hand and Right Hand Steel Mesh to provide protection over


Enclosed Cab Additional Side Screen Protection. Includes Left Hand and Right Hand Steel Mesh to provide protection over laminated cab glass.

A/C FOPS Guard


Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Lexan Front Screen, Heavy Duty Rear Bars - Canopy machines

only





PRICE PAGES

Demolition Package - Includes Fire Extinguisher, Level 2 FOPS Guard, Twine Cutter, Front Screen Guard, Heavy Duty Rear Bars - Canopy machines

must order G008






F.O.B.

SAVANNAH,

GA








Snow Buckets







Grapple Attachments












Hammers



Auger Drive Units













PART NUMBER




F.O.B.

SAVANNAH,

GA
















Auger Extensions





















Forestry Cutters


Dozer Blades




PART NUMBER




F.O.B.

SAVANNAH,

GA






881U532 Bale Spear 333/L5627 $821

Trenchers




Brush Cutters




Stump Grinders



Cold Planers







Saws












881U670 72" Snow Push 333/L5629 $3,054


PRICE PAGES

PART NUMBER




TELESCOPIC HANDLER / LOADALL

JCB LOADALL

506-36


MACHINE PRICE LIST

in U.S. Dollars



EFFECTIVE: JULY 9, 2013

506-36 LOADALL U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GAEFFECTIVE: JULY 9, 2013

STANDARD EQUIPMENT

GENERAL One piece main frame with sway control and componentized driveline

ENGINE JCB Dieselmax Turbo charged 4.4 L (269 in³) 74 HP Tier 4i, dual element air

cleaners, spin-on fuel filter, fuel/water separator, spin on vertical oil filter,

antifreeze protection down to - 30° F

TRANSMISSION JCB Powershift transmission incorporating torque converter, bevel box and a 4

speed Powershift gearbox in one resiliently mounted unit.

A combined steering column mounted switch incorporating directional control

and 4 forward and 4 reverse Powershift gears. Travel speed 15.5mph (25kph).

AXLES Front and rear drive axles: JCB epicyclic hub reduction, drive/steer axles with

JCB Max-Trac torque proportioning differentials. Permanent 4 wheel drive.

BRAKES Service brakes: Servo-assisted-hydraulically activated, self-adjusting, oil-

immersed multi-disc type on front axle.

Parking brake: Hand operated disc brake on output of gearbox.

ELECTRICAL 12 v negative earth, 130 AH battery. 95 amp alternator. Reverse alarm.

INSTRUMENTS Audio-visual warning system for, coolant temperature, engine oil pressure, air

cleaner, battery charge, transmission oil temperature and pressure, water in

fuel. Engine speed indicator, engine temperature, fuel gauge, clock and lateral

inclinometer. All time display hour meter, visible from outside the cab

STEERING Hydrostatic power steering.

Three steer mode options: front wheel steer; all wheel steer; crab steer:

operated from in the cab by a selection lever

CAB/ CANOPY Quiet, safe and comfortable cab/canopy conforms to ROPS ISO 3471 and FOPS

ISO 3449. Available as safety frame or fully enclosed. (Right hand side and rear

window as standard on canopy. )

Oil servo joystick to lift, extend and tilt. Direct acting mechanical levers on sway

and auxiliary. Tilt adjustable steer column with stalk control of Powershift

change and forward/reverse shuttle. Throttle and brake pedal. Adjustable seat

with adjacent park brake.

BOOM 3 section boom with a max lift height of 36’ 4”, hydraulic parallel lift, max lift

capacity of 6,000lbs to full height. ‘U’ pressing design, made from high tensile

steel. Low maintenance, hard wearing pads.

HYDRAULICS Two stage gear pump, open center system, 29 gpm, 3,770 psi operating

pressure. Single auxiliary hydraulic service on boom.






DEALER FIT - LOADALLS and AG (LISTED SEPARATELY FOR ALL LOADALLS & AG MACHINES)

All prices and specifications subject to change without notice page 2 of 6 506-36 USD Price Page


PRICE PAGES

F.O.B.



SALES PACKAGE BUILD CODE: 5021A 5021B

CODE ITEM CANOPY CAB

5071

500A010

500B032

500C044

500C045 Cab fully glazed with front, roof and rear wipers, including heater

500D004

500D006 Fabric suspension seat with adjustable back with 2" seatbelt

500E021

500F211

500H091

500K478

EFFECTIVE: MAY 1, 2013 SUGGESTED LIST PRICE $89,176 $93,335

Operators Manual - English

Engine block heater

Face level fan

506-36, 4 Wheel Steer, Sway control, 74HP Turbo engine and powershift

transmission

13.00 x 24 Industrial tread - Air filled

Servo controls - 2 lever placing pattern - One auxiliary service

Canopy with side and rear glass

Vinyl suspension seat, fixed back with 2" seatbelt (For canopy)

Toolcarrier quickhitch


configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using t he

Custom Build, Attachments & Options Sections following.



PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)

5071 506-36, 4 Wheel Steer, Sway control, 74HP Turbo engine and powershift transmission $75,654

TIRES (E)

500A010 13.00 x 24 Industrial tread - Air filled $6,469

500A013 13.00 x 24 Industrial tread - Air filled with puncture sealant $7,728

CONTROLS (E)

500B032 Servo controls - 2 lever placing pattern - One auxiliary service $3,009

OPERATORS AREA (E)

500C044 Canopy with side and rear glass $2,233

500C045 Cab fully glazed with front, roof and rear wipers, including heater $6,392

SEATS (E)

500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For canopy) $613


500D006 Fabric suspension seat with adjustable back with 2" seatbelt $613


EFFECTIVE: MAY 1, 2013QUICK COUPLER (E)

500E021 Toolcarrier quickhitch $692

OPERATORS MANUAL (E)

500F211 Operators Manual - English $161

500F212 Operators Manual - French $161




existing machines.



PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

ELECTRICAL OPTIONS

500G129 Front work lights $139

500G130 Front and rear work lights $225

500G018 Road lights - Headlights, turn signals, stop / tail lights and reverse lights $698

500G402 Strobe light $157

ENGINE OPTIONS

500H083 Fuel tank protection (Guard on rear of tank - Between tire and tank) $447

500H091 Engine block heater $145

OPERATORS AREA OPTIONS

500K080 Air Conditioning $2,981

500K041 Radio ready - Speakers, antenna, wiring - NO RADIO $491

500K042 Sun shade $227

500K050 Front screen guard $480

500K051 Front screen and roof guards $828

500K043 Fire Extinguisher $243

500K478 Face level fan $200







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


CARRIAGES Standard

500M232 48" Carriage, 2.25" Shaft, 12K Capacity 460 209 $1,955



CARRIAGES Side Tilt

500Q903 48" Side Tilt Carriage, 2.25" Shaft, 10K Capacity 732 332 $4,583


CARRIAGES Side Shift

500Q905 48" Side Shift Carriage, 2.25" Shaft, 10K Capacity 831 377 $5,256


CARRIAGES Swing

500Q907 72" Swing Carriage, 2.25" Shaft, 10K Capacity 1,050 476 $8,739

FORKS

500M224 48" x 5" x 2" Pallet forks (2) for 2.25" fork shaft 318 144 $1,337


500M803 72" x 5" x 2" Pallet forks (2) for 2.25" fork shaft (6,200 lbs capacity at 36" load center) 474 215 $1,815

500M229 48" x 4" x 2.5" Pallet forks (2) for 2.25" fork shaft 318 144 $1,733

EFFECTIVE: MAY 1, 2013OTHER ATTACHMENTS

500L803 1 cu. Yd. 96" wide utility bucket 775 352 $2,337

500T815 12' Truss boom (1,400 lbs capacity) 205 93 $2,979

500T816 Coupler blank 85 39 $776



JCB LOADALL

507-42


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL One piece main frame with sway control and componentized driveline,

automatic rear axle stabilization system.

ENGINE JCB Ecomax Turbo charged 4.4 L (269 in³) 74 HP, Tier 4i, dual element air










immersed multi-disc type on front and rear axles.

















BOOM 3 section boom with a max lift height of 42’ , hydraulic parallel lift, max lift

capacity of 7,000lbs. ‘U’ pressing design, made from high tensile steel. Low

maintenance, hard wearing pads.











PRICE PAGES

F.O.B.





5449 507-42, 4 Wheel Steer, Sway control, RAS, 74HP Turbo engine and powershift transmission

500A031 14.00 x 24 Industrial tread - Air filled

500B032 Servo controls - 2 lever placing pattern - One auxiliary service

500C044 Canopy with side and rear glass


500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For canopy)


500E021 Toolcarrier quickhitch

500F211 Operators Manual - English

500H091 Engine block heater

500K478 Face level fan







PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)

5449 507-42, 4 Wheel Steer, Sway control, RAS, 74HP Turbo engine and powershift transmission $82,507

TIRES (E)



CONTROLS (E)


OPERATORS AREA (E)



SEATS (E)





QUICK COUPLER (E)








existing machines.



PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

ELECTRICAL OPTIONS





ENGINE OPTIONS

















PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


CARRIAGES Standard




CARRIAGES Side Tilt






CARRIAGES Swing


FORKS





OTHER ATTACHMENTS






JCB LOADALL

509-42


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT


automatic rear axle stabilization system.

ENGINE JCB Dieselmax Turbo charged 4.4 L (269 in³) 109 HP, Tier 4i, dual element air








































PRICE PAGES

F.O.B.





5070 509-42, 4 Wheel Steer, Sway control, RAS, 109HP Turbo engine and powershift transmission

















PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)

5070 509-42, 4 Wheel Steer, Sway control, RAS, 109HP Turbo engine and powershift transmission $87,808

TIRES (E)



CONTROLS (E)


OPERATORS AREA (E)



SEATS (E)





QUICK COUPLER (E)








existing machines.



PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

ELECTRICAL OPTIONS





ENGINE OPTIONS

















PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


CARRIAGES Standard




CARRIAGES Side Tilt






CARRIAGES Swing


FORKS





OTHER ATTACHMENTS






JCB LOADALL

510-56


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT


automatic rear axle stabilization system, axle mounted front stabilizers.

ENGINE JCB Dieselmax Turbo charged 4.4 L (269 in³) 109 HP, Tier 4i, dual element air








































PRICE PAGES

F.O.B.




CODE ITEM CAN/4WS CAB/4WS

5223


500B033


500C046

500D004

500D006






Fabric suspension seat with adjustable back with 2" seatbelt

510-56, Sway control, Front stabilizers, RAS, 109HP Turbo engine and powershift

transmission

Servo controls - 2 lever placing pattern - One auxiliary service

Cab fully glazed with front, roof and rear wipers, including heater

Vinyl suspension seat, fixed back with 2" seatbelt (For canopy)




All prices and specifications subject to change without notice page 3 of 6 510-56USD Price Page


PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)

5223 510-56, Sway control, Front stabilizers, RAS, 109HP Turbo engine and powershift transmission $119,532

TIRES (E)



CONTROLS (E)


OPERATORS AREA (E)



SEATS (E)





QUICK COUPLER (E)








existing machines.



PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

ELECTRICAL OPTIONS





ENGINE OPTIONS

















PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


CARRIAGES Standard




CARRIAGES Side Tilt






CARRIAGES Swing


FORKS





OTHER ATTACHMENTS






JCB LOADALL

512-56


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT



ENGINE JCB ECOMAXTurbo charged 4.4 L (269 in³) 109 HP, Tier 4i, dual element air








































PRICE PAGES

F.O.B.





5232




500C046









512-56, Sway control, Front stabilizers, RAS, 109HP Turbo engine and powershift transmission




All prices and specifications subject to change without notice page 3 of 6 512-56USD Price Page


PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)


TIRES (E)



CONTROLS (E)


OPERATORS AREA (E)



SEATS (E)





QUICK COUPLER (E)








existing machines.



PRICE PAGES

F.O.B.

SAVANNAH, GA


SALES U.S.

CODE ITEM LIST

ELECTRICAL OPTIONS





ENGINE OPTIONS


















PRICE PAGES

F.O.B.

SAVANNAH, GA


SALES WEIGHT U.S.


CARRIAGES Standard




FORKS




OTHER ATTACHMENTS







JCB LOADALL

514-56


MACHINE PRICE LIST

in U.S. Dollars



EFFECTIVE: September 30, 2013


PRICE PAGES

F.O.B.

SAVANNAH, GA EFFECTIVE: SEPTEMBER 30, 2013

STANDARD EQUIPMENT



ENGINE JCB ECOMAX Turbo charged 4.4 L (269 in³) 109 HP, Tier 4i, dual element air
































SECTIONS ARE ORGANIZED AS FOLLOWS: Section 1 - PACKAGE BUILDS Section 2 - CUSTOM BUILD - NEW FACTORY BUILT ORDERS Section 3 - OPTIONS - NEW FACTORY BUILT ORDERS Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS


PRICE PAGES

F.O.B.

SAVANNAH, GAEFFECTIVE: SEPTEMBER 30, 2013




5603

500A042 17.25x 25 TITAN 20PLY (UNBALLASTED)

500B033 Servo controls - 2 lever placing pattern - One auxiliary

service


500C046

500D004 Vinyl suspension seat, fixed back with 2" seatbelt (For

canopy)

500D006 Fabric suspension seat with adjustable back with 2"

seatbelt

500E489 72" Side Tilt Carriage





514-56, Sway control, Front stabilizers, RAS, 109HP Turbo engine and powershift transmission


Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS as required from Section 4. Package Build configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine using the Custom Build, Attachments & Options Sections following.


PRICE PAGES

F.O.B.

SAVANNAH, GA EFFECTIVE: SEPTEMBER 30, 2013


SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)


TIRES (E)

500A042 17.25x 25 TITAN 20PLY (UNBALLASTED) $9,609

500A043 17.25x 25 TITAN 20PLY (UNBALLASTED WITH SEALANT) $10,040

500A044 17.25x 25 TITAN 20PLY (FOAM BALLASTED) $13,784

CONTROLS (E)


OPERATORS AREA (E)



SEATS (E)





CARRIAGES (E)

500E489 72" Side Tilt Carriage $0




If a Package Build machine from Section 1 will not meet your requirements, please order a machine by selecting one code from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.



PRICE PAGES

F.O.B.

SAVANNAH, GA


SALES U.S.

CODE ITEM LIST

ELECTRICAL OPTIONS





ENGINE OPTIONS











FORKS

500M240 Forks 60 x 130 x1829 15,700lb $2,157

EFFECTIVE: SEPTEMBER 30, 2013


** A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN 3441.

JCB LOADALL

515-40COMPACT TELESCOPIC HANDLER


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE 2.3 liter Industrial diesel, 4 -cylinder, liquid cooled, direct injection with 50 HP

Tier III engine, pre cleaner, dual element air cleaner, spin on filter, water separator thermostart

assist.

TRANSMISSION Hydrostatic Transmission, maximum travel speed 12.4mph. Full-time four-wheel drive and four-wheel steer.

TIRES Option of Industrial or Semi- Turf tread pattern tires

AXLES Beam type axles with two hub mounted drive motors on each axle.

BRAKES Hydraulically activated drum brake on front motors: Parking Brake, manually operated in front hubs.

ELECTRICAL 12 volt, meets IP67 water ingress test standard.

INSTRUMENTATION Visual warning system for coolant temperature, engine oil pressure, air cleaner, battery charge,

fuel gauge, hour meter, high speed and park brake.

CANOPY UNIT ROPS/FOPS certified. RH side glass, roof and rear glass, vinyl covered suspension seat with seat belt,

5' 11" OVERALL HEIGHT horn, in-cab storage. Single lever control for boom lift/lower and rollback/dump with integral

forward/reverse switch. Operator manual.


CAB UNIT ROPS/FOPS certified. Fabric covered suspension seat with seat belt, heater with defroster vent

5' 11" OVERALL HEIGHT system, front windshield wiper and washer, horn, in-cab storage. Single lever control for

boom lift and dump incorporating forward/reverse switch. Operator manual

TELESCOPIC BOOM Two section, 13' 3" lift height with hydraulic parallel lift, 3300 lb. max lift capacity.

ATTACHMENT Universal Skid Steer Loader Quick Attach with manual locking levers.

MOUNTING

HYDRAULICS Open center 12.5 GPM system. Single lever joystick with "Loader" control pattern (boom/raise/lower,

bucket rollback/dump). Single auxiliary hydraulic service with detent to allow use with continuous

flow applications.









PRICE PAGES

F.O.B.



SALES PACKAGE BUILD CODE: 2900A 2900B 2900CCODE ITEM CANOPY CAB CAB A/C

2911

290A002

290B001

290C012

290C013

290D001

290D002 Fabric suspension seat - for cab

290E001 Universal skidsteer quick attach coupler

290F002 Operators manual - American English

290G002

290G005 Face level fan

EFFECTIVE: MAY 1, 2013Air Conditioning and Face Level Fan

290G012 Work lights - 2 front and 1 rear




Radio installation kit, includes speakers - EXCLUDES radio

515-40 Telescopic Handler, 4WS/4WD 50 hp, 3,300 lb max. lift capacity, 13'2"

max. lift height

10.0/75-15.3 10PR Industrial wheel and tire

One auxiliary hydraulic circuit with joystick control of loader functions.

Cab with heater and front wiper with washer

Canopy with no heater

Vinyl suspension seat - for canopy

Select one of the following machine PACKAGE BUILD codes and ATTACHMENTS from Section 4. Package Build

configurations cannot normally be changed. If a Package Build does not meet your requirements please order a machine

using the Custom Build, Attachments & Options Sections following.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

2911 515-40 Telescopic Handler, 4WS/4WD 50 hp, 3,300 lb max. lift capacity, 13'2" max. lift height 5,851 2,660 $54,064

TIRES (E)

290A002 10.0/75-15.3 10PR Industrial wheel and tire 400 182 $659

290A003 10.0/75-15.3 14PR Semi turf wheel and tire 400 182 $649


290B001 One auxiliary hydraulic circuit with joystick control of loader functions. 15 7 $1,034

OPERATORS AREA (E)

290C012 Cab with heater and front wiper with washer 1,150 523 $2,274

290C013 Canopy with no heater 900 409 $0

SEATS (E)

290D001 Vinyl suspension seat - for canopy 50 23 $0

290D002 Fabric suspension seat - for cab 50 23 $204

EFFECTIVE: MAY 1, 2013ATTACHMENT COUPLER OPTIONS (E)

290E001 Universal skidsteer quick attach coupler 180 82 $583


290F002 Operators manual - American English 5 2 $0







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


GENERAL MACHINE OPTIONS

290G002 12 5 $176

290G003 25 11 $973

290G005 1 0 $183

290G115 2 1 $2,665

290G012 15 7 $303

290R001 15 7 $466

290R004 15 7 $306

290R017 5 2 $1,711

Radio installation kit, includes speakers - EXCLUDES radio

Road Lights and Mirrors

Face level fan

Chaff Guard

3 Point Lifting points

Front Screen Guard

Air Conditioning and Face Level Fan

Work lights - 2 front and 1 rear




PRICE PAGES

F.O.B.


SECTION 4 - ATTACHMENTS - FACTORY BUILT ORDERS

SALES WEIGHT U.S.


FORKS - PALLET

290L015 Floating Forks and Frame 427 194 $2,142

290L014 ITA Forks and Frame 420 191 $2,142

BUCKETS - DIRT / GENERAL PURPOSE

290U670 66" Dirt/GP Bucket / 14.1 cu. ft. Capacity 440 200 $1,184




BUCKETS - LANDSCAPE

290U680 66" Landscape Bucket / 17.5 cu. ft. Capacity 500 227 $1,180




BUCKETS - HIGH CAPACITY / LIGHT MATERIAL

290U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 633 288 $1,588

290U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 749 340 $1,887

290U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 740 336 $2,096

EFFECTIVE: MAY 1, 201396" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 880 400 $2,446

BUCKET ACCESSORIES

290H301 Bolt on Edge for 66" bucket 107 49 $359




290H305 Tooth Bar for 66" bucket - Over bucket 90 41 $762




290H309 Tooth Bar for 66" bucket - Over bolt on edge 112 51 $762




GRAPPLES - BRUSH

290U200 72" Heavy Duty Brush Grapple 925 420 $4,615


290U202 84" Heavy Duty Brush Grapple 1,054 479 $5,158

AG ATTACHMENTS

290U550 72" Manure Forks with Top Grapple 655 298 $3,494

290U551 84" Manure Forks with Top Grapple 805 366 $4,193

290U001 49" Bale Spear 225 102 $1,381

** ATTACHMENTS FOR USE WITH SKIDSTEER QUICK ATTACH COUPLER **


JCB LOADALL

520-40COMPACT TOOL CARRIER


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE 2.2L, 48.8 hp engine, Tier III compliant, Two stage dry-type air cleaner, spin-on fuel

filter with integral water trap, Anti freeze protection to -35 degrees Fahrenheit.

TRANSMISSION Two speed Hydrostatic Transmission. Full-time four-wheel drive and four-wheel steer.

TIRES Option of Industrial or Agriculture tread pattern tires

AXLES JCB Max-Trac with torque proportioning and outboard planetary drive.

BRAKES Service Brake: Hydrostatic braking is assisted by a hydraulically activated, single disc

brake on the transmission output shaft. Parking Brake, manually operated single-disc caliper brake on

the transmission output shaft.

ELECTRICAL 12 volt, meets IP67 water ingress test standard. 55 amp alternator, 95 AH heavy duty battery.

INSTRUMENTS Visual warning system for coolant temperature, engine oil pressure, air cleaner, battery charge,

transmission oil pressure and temperature, fuel gauge and hour meter.

CANOPY UNIT Meets SAE J231 FOPS and SAE J1040 ROPS requirements. Metal side screen, roof and rear glass,

6' 6" OVERALL HEIGHT vinyl covered suspension seat with seat belt, horn, in-cab storage. Single lever control for boom

lift/lower and rollback/dump with integral forward/reverse switch. Operator manual and operation video.

Optional canopy components: dual outside mirrors, front canopy guard, work lights, road lights.

CAB UNIT Meets SAE J231 FOPS and SAE J1040 ROPS requirements. Fabric covered suspension seat with

6' 6" OVERALL HEIGHT seat belt, heater with defroster vent system, front windshield wiper and washer, horn,

in-cab storage. Single lever control for boom lift and dump incorporating forward/reverse switch.

Operator manual and operation video. Optional cab components: dual outside mirrors,

front cab guard, work lights, road lights.

TELESCOPIC BOOM Two section, 13' 2" lift height with hydraulic parallel lift, 4000 lb. Lift capacity to full height.

ATTACHMENT Option of either Universal Skid Steer Loader Quick Attach or Compact Tool Carrier Coupler.

MOUNTING

HYDRAULICS Open center 16 GPM system. Single lever joystick with "Loader" control pattern (boom/raise/lower,

bucket rollback/dump). Float function on boom circuit. Single auxiliary hydraulic service with detent

to allow use with continuous flow applications.









PRICE PAGES

F.O.B.



SALES PACKAGE BUILD CODE: 5817A 5817B 5817FCODE ITEM CANOPY/4WS CAB/4WS CAB/4WS

5817

540A004

540A005

540B004

540C003 Canopy with roof and rear glass

540C001 Cab with heater and front wiper with washer

540D004 Vinyl suspension seat - for CANOPY or CAB

540D001 Fabric suspension seat - for CAB machines

540E001 Universal Skid Steer Loader (SSL) Quick Attach coupler

540F010

540G005

540G020 Face Level Fan

540G004 Exterior Mirrors

540G006 Back-up Alarm (SAE J994 compliant)

540G013

540G014 Front windshield guard - for use with either canopy or cab

540H002




Operators Manual - American English

Limited Slip Differentials - in BOTH front and rear axles (not recommended for

continuous use on paved surfaces where wheels do not slip)

Radio ready - Includes speakers, antenna and harness to install radio - radio

NOT included

Work Lights 2 front top of cab and 2 rear-mounted in counterweight

520-40 4 wheel drive, 4 wheel steer telescopic handler, 48.8 hp, 4000 lb lift

capacity

11.5/80-15.3, 8 ply Solideal TractionMaster - R-1 Agriculture Style Tread

Pattern

12.00 x 16.5, 10 ply Solideal Hauler® SKS - R4 Industrial Style Tread Pattern

One aux. hyd. service with detent for continuous flow applications






PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

5817 520-40 4 wheel drive, 4 wheel steer telescopic handler, 48.8 hp, 4000 lb lift capacity 9,700 4,409 $63,853

TIRES (E)

540A003 10.00 X 16.5, 12 ply Solideal Hauler® SKS - R4 Industrial Style Tread Pattern 400 182 $515

540A005 12.00 x 16.5, 10 ply Solideal Hauler® SKS - R4 Industrial Style Tread Pattern 450 205 $944

540A007 12,00 x 16.5 10-ply Solideal LifeMaster SKZ - Non-Directional Tread Pattern 1,150 523 $3,378

540A004 11.5/80-15.3, 8 ply Solideal TractionMaster - R-1 Agriculture Style Tread Pattern 520 236 $684

540A006 33 x 15.5 x 16.5, 10 ply Solideal TractionMaster - R-1, Agriculture Style Tread Pattern 850 386 $1,444


540B004 One aux. hyd. service with detent for continuous flow applications 15 7 $268

OPERATORS AREA (E)


540C003 Canopy with roof and rear glass 1,100 500 $684

540C004 Cab with heater and Air Conditioning, front wiper with washer 1,350 614 $5,926

SEATS (E)

540D001 Fabric suspension seat - for CAB machines 50 23 $0

540D004 Vinyl suspension seat - for CANOPY or CAB 50 23 $0

ATTACHMENT COUPLER OPTIONS (E)

540E001 Universal Skid Steer Loader (SSL) Quick Attach coupler 180 82 $572

540E002 Compact Tool Carrier coupler with MANUAL locking of the retaining pin 200 91 $342

540E003 Compact Tool Carrier coupler with HYDRAULIC locking of the retaining pin 240 109 $1,341


540F010 Operators Manual - American English 5 2 $0

540F019 Operators Manual - French 5 2 $0

540F018 Operators Manual - Spanish 5 2 $0







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


DRIVE TRAIN OPTIONS

540H002 Limited Slip Differentials - in BOTH front and rear axles (not 20 9 $756


540G005 Work Lights 2 front top of cab and 2 rear-mounted in counterweight 15 7 $301

540G004 Exterior Mirrors 55 25 $169

540G002 Front Head Lights with High/Low beam, Rear Lamps, LH/RH turn signals, Hazard Flashers 20 9 $690

540G006 Back-up Alarm (SAE J994 compliant) 2 1 $109

540G008 Roof Wiper for use with CAB 7 3 $248

540G009 Roof and Rear Wiper for use with CAB 35 16 $469

540G013 Radio ready - Includes speakers, antenna and harness to install radio - radio NOT included 12 5 $172

540G017 Arm Rest - Left Hand rear folding 10 5 $66

540G020 Face Level Fan 7 3 $180

540G015 Chaff guard - Screen covers the fan shroud to min. entry of chaff/debris into radiator 25 11 $301

540G014 Front windshield guard - for use with either canopy or cab 15 7 $466




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


** ATTACHMENTS FOR USE WITH COMPACT TOOL CARRIER COUPLER **BUCKETS - Attach to Compact Tool Carrier Coupler

540L001 General Purpose bucket, 0.92 yd³, 69 in wide 620 282 $2,357

FORK CARRIAGE WITH FLOATING SHAFT - Attach to Compact Tool Carrier Coupler

540L003 Fork Frame and 42" pallet forks with 1.75" fork shaft 482 219 $1,925

SPECIALIZED FORK CARRIAGES WITH FLOATING SHAFT - Attach to Compact Tool Carrier

540T800 Side Tilt carriage with 1.75" fork shaft, includes load guard (Requires 540M810 or 540M615 forks) 446 203 $3,276

FLOATING SHAFT FORK SETS - For use on Carriages fitted with 1.75" fork sets listed above

540M810 48" Pallet forks (2), 48" x 4" x 1-3/4", for 1.75" fork shaft, (For use on 540T800) 229 104 $1,106

540M615 48" Block tines (6), 48" x 2" x 1-1/2", for 1.75" fork shaft, (For use on 540T800) 318 145 $3,368

ITA CLASS II FORK CARRIAGE - Attach to Compact Tool Carrier Coupler

540LA04 Class II ITA carriage, (Requires 540L114 forks) 326 148 $1,802

ITA CLASS II FORKS - Attach to Compact Tool Carrier Coupler

540L114 48" Class II ITA Forks (2), 48" x 4" x 1-3/4", (For use on 540LA04) 269 122 $1,122

AGRICULTURAL ATTACHMENTS - Attach to Compact Tool Carrier

540LA13 Heavy Duty Manure fork and grab, 75" wide 794 361 $5,982

540LA06 Round bale spike 176 80 $1,430

540LA07 One ton bale fork, includes hoses 992 451 $4,446

OTHER ATTACHMENTS for use with Compact Tool Carrier Coupler

540T803 12'6" truss boom, 800 lbs capacity 209 95 $1,809

540T802 Bucket Sweeper broom, 60" wide with 24" diameter brush 794 361 $9,167

540T805 1200EH Auger includes hoses and coupler 421 191 $3,454

540T806 9" Auger bit 75 34 $507

540T807 12" Auger bit 101 46 $568

540T808 18" Auger bit 163 74 $767

540T809 24" Auger bit 200 91 $874

ADAPTER FOR FITTING SSL ATTACHMENTS TO COMPACT TOOL CARRIER COUPLER

540T804 Weld-on adapter - converts non - compact tool carrier attachments to CTC hitch 300 136 $616

540T801 Adapter coupler - allows skid steer loader attachments to be used w/Compact Tool Carrier hitch 300 136 $1,783

Select Attachments as desired within limitations if indicated. NOTE: SSL (Skid Steer Loader) Coupler and CTC (Compact

Tool Carrier) Couplers are different and attachments are not interchangeable between the couplers unless an adapter is used.



PRICE PAGES

F.O.B.


SECTION 4 - ATTACHMENTS - FACTORY BUILT ORDERS (Cont):

SALES WEIGHT U.S.


** ATTACHMENTS FOR USE WITH SKID STEER LOADER QUICK ATTACH **

FORKS - PALLET

540L006 Fork Frame with 1.75" Floating Shaft, Integral Load Guard, 42" Forks 427 194 $2,142

540L005 ITA Class II Fork Frame, Integral Load Guard, 42" Forks 420 191 $2,142

BUCKETS - DIRT / GENERAL PURPOSE





BUCKETS - LANDSCAPE





BUCKETS - HIGH CAPACITY / LIGHT MATERIAL

540U690 75" High Capacity / Light Material Bucket / 21 cu. ft. Capacity 633 288 $1,588

540U691 84" High Capacity / Light Material Bucket / 26.8 cu. ft. Capacity 749 340 $1,887

540U692 84" Extra High Capacity / Very Light Material Bucket / 43.9 cu. ft. Capacity 740 336 $2,096

540U693 96" Extra High Capacity / Very Light Material Bucket / 54 cu. ft. Capacity 880 400 $2,446

BUCKET ACCESSORIES













GRAPPLES - BRUSH




JCB LOADALL

520-50


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL One piece unitized mainframe and componentized driveline

ENGINE 4.4L (268 CID), 83.8 SAE GROSS HP, Tier III, Air pre-cleaner, Dual element air cleaner, spin-on fuel filter,

Fuel/water separator, Thermostart assist, Anti-freeze protection to -35 deg. F.

TRANSMISSION JCB 4x4 Powershuttle, Synchronized shifting in all gears, permanent 4WD, transmission disconnect

switch on loader and transmission levers.

AXLES JCB MAX-TRAC with torque proportioning and outboard planetary drive

BRAKES Front and rear axle, multi disc, oil immersed, power assisted self-adjusting. Electrohydraulically

operated oil immersed multi disc type parking brake with brake on alarm and

transmission disconnect.

ELECTRICAL 12 volt, Meets IP67 water ingress test standard, 65 amp alternator, 92 AH heavy duty battery.

Road lights and indicators fitted as standard.

INSTRUMENTS Audible and visual warning system, Tachometer, Hourmeter, Fuel Gauge, Coolant temp. gauge,

Warning light for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp.,

trans oil pressure, parking brake, Indicators for lights, hazard lights, turn signals (if fitted).

CANOPY UNIT Meets SAE J231 FOPS/ SAE J1040 ROPS requirements, metal side screen, vinyl seat with

7' 2.5" OVERALL HEIGHT seat belt, rear view mirror, front worklights, horn, in-cab storage, single lever control

for boom lift and dump, backup alarm meets SAE J994. Operation and parts manuals,

operation video. OPTIONAL 6' 6.5" OVERALL HEIGHT CANOPY.

CAB UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, deluxe trim, suspension seat with

7' 2.5" OVERALL HEIGHT seat belt, heater with defroster vent system, windshield wipers and washers for front and

rear, rear view mirror, front worklights, windshield guard, horn, in-cab storage. Single lever

control for boom lift and dump, back-up alarm meets SAE J994. Operation and parts

manuals, operation video. OPTIONAL 6' 6.5" OVERALL HEIGHT CAB.

TIRES Choice of industrial or agricultural tread pattern tires to suit a variety of applications.

TELESCOPIC BOOM Two section, 16' 5" lift height with hydraulic parallel lift, 4000 lbs. Capacity to full height.

CARRIAGE Choice of tool carrier with manual pin locking or hydraulic pin-locking.

HYDRAULICS Single lever joystick with "Loader" pattern control. Open center system with 17 GPM.

Single auxiliary hydraulic service.









PRICE PAGES

F.O.B.



5329A 5329B 5329FSALES PACKAGE BUILD CODE: CANOPY STD. CAB LOW CAB

CODE ITEM 4WS 4WS 4WS

5329

540A101 10.5/80-18 (10 ply) Firestone, Industrial tread, 5' 11" overall width.

540A103 15.0/55-17 (10 ply) Continental Traction tread, 6' 3" overall width

540B101 One auxiliary hydraulic service, Manual pin locking, (For use on 540E101)

540B103 One auxiliary hydraulic service, Hydraulic pin locking, (For use on 540E102)

540C110 Canopy (7' 2.5" overall height with 540A101 Firestone tires) with roof glass

540C113 Cab (7' 2.5" overall height with 540A101 Firestone tires) heater, tinted glass, roof & rear wiper

540C116 LOW Cab (6' 6.5" overall height with 540A103 Continental tires) heater, tinted glass, roof & rear wiper

540D101 Vinyl Suspension Seat (for use with 540C110 canopy)

540D102 Cloth Suspension Seat (for use with 540C103 cab)

540D105 Cloth Static Seat (for use with LOW cab 540C106)

540E101 Compact Toolcarrier with MANUAL pin locking, (Requires 540B101)

540E102 Compact Toolcarrier with HYDRAULIC pin locking, (Requires 540B103)

540F113 Operators Manual - American English

540G123 No Roadlights - Canopy

540G106 No Roadlights - Enclosed Cab

540K101 Front windshield guard for standard cab

540K103 Front windshield guard for LOW Cab

540H101 Limited Slip axles

540H105 Engine block heater, 110-120 volt, 850 Watt (Cab build only)

540G104 Face level fan




520-50 4 wheel drive, 4 wheel steer telescopic handler, 83.8 hp diesel engine,

4000 lb lift capacity, road lights






PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

5329 7,863 3,574 $69,116

TIRES (E)

540A101 10.5/80-18 (10 ply) Firestone, Industrial tread, 5' 11" overall width. 600 273 $209

540A103 15.0/55-17 (10 ply) Continental Traction tread, 6' 3" overall width 700 318 $947


540B101 One auxiliary hydraulic service, Manual pin locking, (For use on 540E101) 15 7 $989

540B103 One auxiliary hydraulic service, Hydraulic pin locking, (For use on 540E102) 60 27 $1,113

OPERATORS AREA (E)

540C113 Cab (7' 2.5" overall height with 540A101 Firestone tires) heater, tinted glass, roof & rear wiper 1,150 523 $3,919

540C116 LOW Cab (6' 6.5" overall height with 540A103 Continental tires) heater, tinted glass, roof & rear wiper 1,150 523 $4,814

540C109 LOW Canopy (6' 6.5" overall height with 540A103 Continental tires) with roof glass 1,100 500 $2,799

540C110 Canopy (7' 2.5" overall height with 540A101 Firestone tires) with roof glass 1,100 500 $2,577

SEATS (E)

540D101 Vinyl Suspension Seat (for use with 540C110 canopy) 50 23 $68

540D102 Cloth Suspension Seat (for use with 540C103 cab) 50 23 $209

540D105 Cloth Static Seat (for use with LOW cab 540C106) 50 23 $209

540D106 Vinyl Static Seat (for use with LOW canopy 540C109) 50 23 $68

TOOLCARRIER (E)

540E101 Compact Toolcarrier with MANUAL pin locking, (Requires 540B101) 200 91 $0

540E102 Compact Toolcarrier with HYDRAULIC pin locking, (Requires 540B103) 200 91 $1,341


540F113 Operators Manual - American English 5 2 $0


520-50 4 wheel drive, 4 wheel steer telescopic handler, 83.8 hp diesel engine, 4000 lb lift capacity,

road lights


from each E (Essential) category below. Select Options and/or Attachments from Section 3 or 4.





PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


CAB & ELECTRICAL OPTIONS

540G103 Rear worklight 2 1 $104

540G104 Face level fan 2 1 $185

540G106 No Roadlights - Enclosed Cab 0 0 -$492

540G123 No Roadlights - Canopy 0 0 -$492

540G111 #N/A #N/A #N/A #N/A

540G112 Speaker Installation Kit (No radio supplied) 2 1 $172

540H105 Engine block heater, 110-120 volt, 850 Watt (Cab build only) 3 1 $222

540K101 Front windshield guard for standard cab 10 5 $466

540K103 Front windshield guard for LOW Cab 10 5 $466

540K104 Roof wiper (For standard cab only) 6 3 $238

540G117 Air conditioning 30 14 $4,791

OTHER BASE MACHINE OPTIONS

540H101 Limited Slip axles 0 0 $1,035




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BUCKETS

540L105 General Purpose bucket, 0.92 cu. yd., 78" wide 653 297 $2,478

540LA01 Light material bucket, 1.4 cu. yd, 78" wide 869 395 $3,333

540L801 #N/A #N/A #N/A #N/A

540L108 Tooth kit for 540L105 GP Bucket 30 14 $336

540L112 78" wide Cutting Edge for 540L105 GP bucket 119 54 $500

CARRIAGES (Include fork shaft)

540L101 Fork Frame and 42" pallet forks with 1.75" fork shaft 482 219 $1,925

540L109 Fork Frame with 1.75" fork shaft (Requires 540M810 or 540M615 forks) 253 115 $1,161

540T819 Loadguard for Fork Frame 540L101 and 540L109 20 9 $405


540T812 48" wide Side-Shifting Carriage, Class II ITA w/ Loadguard 475 216 $4,845



FORK SETS (Do not include fork shaft)




540LA21 42" Pallet forks (2), 42" x 4" x 1-3/4", for 1.75" fork shaft, (For use on 540L101, 540L109, or 540T800) 229 104 $768

AGRICULTURAL ATTACHMENTS




OTHER ATTACHMENTS






JCB LOADALL

524-50


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE 73.7 hp Turbo charged engine, Tier III compliant, Two stage dry-type air cleaner, spin-on fuel filter


TRANSMISSION Variable -Two Speed - Hydrostatic Transmission - 18.6 mi/hr travel speed.

Full-time four-wheel drive. Three Steering Modes - Two Wheel, Four Wheel and Crab.

TIRES Option of Industrial or Agriculture tread pattern tires

AXLES JCB Max-Trac with torque proportioning and outboard planetary drive.

BRAKES Service Brake: Hydrostatic braking is assisted by a hydraulically activated, single disc brake on

the transmission output shaft. Parking Brake, manually operated single-disc caliper brake on


ELECTRICAL 12 volt system, 95 amp alternator, 110 AH battery (735 CCA @ 0° F). Electrical connections tested to IP69.

Roadlights and indicators fitted as standard

INSTRUMENTS Indicator light / audible alarm monitoring of coolant and transmission oil temperature, engine

and transmision oil pressure, air cleaner restriction, battery charge and parking brake engagement.

Visual display of fuel level, steering mode selection and hour meter.




Back-up alarm (SAE J994 compliant). Optional Canopy Components: exterior mirrors,

front canopy guard, work lights




Operator manual and operation video. Back-up alarm (SAE J994 compliant). Optional Cab

Components: exterior mirrors, front cab guard, work lights

TELESCOPIC BOOM Two section, 16' 5" lift height with hydraulic parallel lift, Lift Capacity: 5,000 lb to full height.

BOOM HITCH Option of Compact Tool Carrier Coupler.

HYDRAULICS Open center 16 gal/min system. Joystick with "Loader" control pattern (boom/raise/lower,


to allow use with continuous flow applications. Three quarter inch flat face hydraulic couplers on auxiliary

service.







All prices and specifications subject to change without notice page 2 of 6 524-50 USA Price Page


PRICE PAGES

F.O.B.




5818 524-50 Telescopic Hander, 73.7 hp, 4WD with 3 steering modes, 5000 lb lift cap.

540A010 12.5/80 X 18, 12 ply SL R4 Solideal - R4 Industrial Style Tread Pattern

540A011 12.5-18, 12 ply Solideal N.H.S. 4L-R1 TractionMaster, R-1

Agricultural Style Tread Pattern

540B011 Triple Lever Hydraulic Controls

540B013 Single Lever Hydraulic Controls


540C009 Cab with heater and Air Conditioning, front wiper with washer




540E006 Compact Tool Carrier Hitch - Compatible with 520-style Attachments

540E011 Compact Tool Carrier Hitch w/ Hyd. Pin Locking (compatible w/ 520-style attachments)


540G024 Front and Rear Mounted Worklights



540G013 Radio ready - Includes speakers, antenna and harness to install radio - radio NOT included


540G034 Chaff Guard

540H006 Limited Slip Differentials - Front and Rear

540H020 Wide core cooling pack









PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

5818 524-50 Telescopic Hander, 73.7 hp, 4WD with 3 steering modes, 5000 lb lift cap. 10,630 4,832 $71,068

TIRES (E)

540A010 12.5/80 X 18, 12 ply SL R4 Solideal - R4 Industrial Style Tread Pattern 600 273 $1,681

540A011 12.5-18, 12 ply Solideal N.H.S. 4L-R1 TractionMaster, R-1 Agricultural Style Tread Pattern 600 273 $1,819

540A013 400/70 R18 Goodyear Agricultural Traction (Factory Fit Only) 625 284 $3,710


540B011 Triple Lever Hydraulic Controls 30 14 $260

540B013 Single Lever Hydraulic Controls 40 18 $2,322

OPERATORS AREA (E)




SEATS (E)




540E006 Compact Tool Carrier Hitch - Compatible with 520-style Attachments 240 109 $665

540E011 Compact Tool Carrier Hitch w/ Hyd. Pin Locking (compatible w/ 520-style attachments) 240 109 $1,488


540F029 Operators Manual - English 5 2 $0









PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


DRIVE TRAIN OPTIONS

540H006 Limited Slip Differentials - Front and Rear 65 30 $729

540H020 Wide core cooling pack 15 7 $1,214







540G022 Roof and Rear Wipers - CANOPY 35 16 $368

540G023 Front Mounted Worklights 25 11 $292

540G024 Front and Rear Mounted Worklights 25 11 $292

540G034 Chaff Guard 15 7 $357

540G027 Battery Isolator Disconnect Switch 5 2 $158


540G012 Engine block heater, 110-120 volt, 850 Watt (Cab build only) 3 1 $222

540R024 Belly Guard and soundproofing 65 30 $1,004




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BUCKETS - Attach to Compact Tool Carrier Coupler

540L010 General Purpose Bucket - 1.3 cubic yard - 82" Wide 670 305 $3,568


540L015 Fork Frame and 42" Long Forks w/ 2" Floating Fork Shaft 500 227 $3,240

540L016 Fork Frame and 47" Long Forks w/ 1.75" Floating Fork Shaft 550 250 $3,131






















JCB LOADALL

527-55


MACHINE PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE 4.4L, 73.7 hp Turbo charged engine, Tier III compliant, Two stage dry-type air cleaner, spin-on fuel filter


TRANSMISSION Variable -Two Speed - Hydrostatic Transmission - 18.6 mi/hr travel speed.

Full-time four-wheel drive. Three Steering Modes - Two Wheel, Four Wheel and Crab.

TIRES Option of Industrial Agricultural Tread Pattern Tires

AXLES JCB Max-TRAC with torque proportioning and outboard planetary drive.

BRAKES Service Brake: Hydrostatic braking is assisted by a hydraulically activated, single disc

brake on the transmission output shaft. Parking Brake, manually operated single-disc caliper brake on


ELECTRICAL 12 volt system, 95 amp alternator, 110AH battery (735 CCA @ 0° F). Electrical connections tested to IP69.

Road lights and indicators fitted as standard

INSTRUMENTS Indicator light / audible alarm monitoring of coolant and transmission oil temperature, engine

and transmission oil pressure, air cleaner restriction, battery charge and parking brake engagement.

Visual display of fuel level, steering mode selection and hour meter.




Back-up alarm (SAE J994 compliant). Optional Canopy Components: exterior mirrors,

front canopy guard, work lights




Operator manual and operation video. Back-up alarm (SAE J994 compliant). Optional Cab

Components: exterior mirrors, front cab guard, work lights

TELESCOPIC BOOM Two section, 18' 0" lift height with hydraulic parallel lift, Lift Capacity: 6,000 lb to full height.

BOOM HITCH Option of Compact Tool Carrier Coupler.

HYDRAULICS Open center 16 gal/min system. Joystick with "Loader" control pattern (boom/raise/lower,


to allow use with continuous flow applications. Three quarter inch flat face hydraulic couplers on auxiliary

service.










PRICE PAGES

F.O.B.




5819 527-55 Telescopic Hander, 73.7 hp, 4WD with 3 steering modes, 6000 lb lift cap.

540A012 12.5/80 X 18, 14 ply SL R4 Solideal - R4 Industrial Style Tread Pattern

540B011 Triple Lever Hydraulic Controls

540B013 Single Lever Hydraulic Controls



540C009 Cab with heater and Air Conditioning, front wiper with washer



540E006 Compact Tool Carrier Hitch - Compatible with 520-style Attachments

540E011 Compact Tool Carrier Hitch w/ Hyd. Pin Locking (compatible w/ 520-style attachments)


540G024 Front and Rear Mounted Worklights



540G013 Radio ready - Includes speakers, antenna and harness to install radio - radio NOT included


540G034 Chaff Guard

540H006 Limited Slip Differentials - Front and Rear

540H020 Wide core cooling pack









PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

5819 527-55 Telescopic Hander, 73.7 hp, 4WD with 3 steering modes, 6000 lb lift cap. 10,910 4,959 $75,403

TIRES (E)

540A012 12.5/80 X 18, 14 ply SL R4 Solideal - R4 Industrial Style Tread Pattern 650 295 $1,856

540A013 400/70 R18 Goodyear Agricultural Traction (Factory Fit Only) 625 284 $3,710


540B011 Triple Lever Hydraulic Controls 30 14 $260

540B013 Single Lever Hydraulic Controls 40 18 $2,322

OPERATORS AREA (E)




SEATS (E)




540E006 Compact Tool Carrier Hitch - Compatible with 520-style Attachments 240 109 $665

540E011 Compact Tool Carrier Hitch w/ Hyd. Pin Locking (compatible w/ 520-style attachments) 240 109 $1,488


540F029 Operators Manual - English 5 2 $0









PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


DRIVE TRAIN OPTIONS

540H006 Limited Slip Differentials - Front and Rear 65 30 $729

540H020 Wide core cooling pack 15 7 $1,214








540G022 Roof and Rear Wipers - CANOPY 35 16 $368

540G023 Front Mounted Worklights 25 11 $292

540G024 Front and Rear Mounted Worklights 25 11 $292

540G034 Chaff Guard 15 7 $357

540G027 Battery Isolator Disconnect Switch 5 2 $158

540G012 Engine block heater, 110-120 volt, 850 Watt (Cab build only) 3 1 $222

540R024 Belly Guard and soundproofing 65 30 $1,004



Brian.Dean

Sticky Note

now H021


PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BUCKETS - Attach to Compact Tool Carrier Coupler

540L010 General Purpose Bucket - 1.3 cubic yard - 82" Wide 670 305 $3,568


540L015 Fork Frame and 42" Long Forks w/ 2" Floating Fork Shaft 500 227 $3,240

540L016 Fork Frame and 47" Long Forks w/ 1.75" Floating Fork Shaft 550 250 $3,131






















JCB LOADALL

531-70


MACHINE PRICE LIST

in U.S. Dollars




Tier 4i


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL One piece unitized mainframe with sway control and componentized driveline

ENGINE 74 GROSS HP, T4i, Dual element air cleaner, spin-on fuel filter,

Fuel/water separator, Anti-freeze protection to -35 deg. F.

TRANSMISSION JCB 4x4 Powershift, Powershuttle direction change, 2.2:1 ratio torque converter, transmission

disconnect on loader lever.


BRAKES Internal mounted inboard on front axle, multi disc, oil immersed, Hydraulic actuation, self adjusting.

Independent disc type park brake with brake on alarm and transmission disconnect.

ELECTRICAL 12 volt, Meets IP67 water ingress test standard, 95 amp alternator, 850 CCA low maintenance battery.



trans oil pressure, parking brake.

CAB UNIT Meets SAE J231 FOPS/ SAE J1040 ROPS requirements, suspension seat with seat belt, tilt

steering column, heater with defroster vent system, windshield wipers and washers for front/rear

and roof glass, rear view mirror, horn, in-cab storage. Backup alarm meets SAE J994

Operation and Parts manuals, operation video.

CANOPY UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, suspension seat with seat belt, tilt steering

column, rear view mirror, horn, in-cab storage, backup alarm meets SAE J994, operation and

parts manuals. Operation video.

TIRES Choice of Options (none standard)

TELESCOPIC BOOM Two section, 23' lift height with hydraulic parallel lift, 6000 lbs. maximum lift capacity to full height.

CARRIAGE Choice of Options (none standard)

HYDRAULICS Dual lever joystick with "Forklift" pattern control. Open center system with 21.6 GPM.

Single auxiliary hydraulic service with 3rd lever control.









PRICE PAGES

F.O.B.





5621

500A408 15.5-25 SGL(12 ply) Industrial tread bias ply

500B401 One auxiliary hydraulic service

500C072 Canopy with clear right hand side glass

500C065 Cab with heater, tinted glass, front and rear wiper

500D116 Vinyl suspension seat, includes 2" seatbelt, CANOPY ONLY

500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY

500E411 48" wide Q-Fit carriage with 2" fork shaft, (Use L409 Load Guard)

500F606 Operators manual - English Language


500H452 Engine block heater, 110-120 volt, 850 Watt

500K148 Deluxe cab trim including radio installation kit with manual steer mode selector

500G455 Front and Rear Worklights - CAB or CANOPY




531-70 4WD 4 Wheel steer, Telescopic handler with sway control, 74 hp






PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

5621 531-70 4WD 4 Wheel steer, Telescopic handler with sway control, 74 hp 12,853 5,830 $94,039

TIRES (E)

500A408 15.5-25 SGL(12 ply) Industrial tread bias ply 600 272 $6,904

500A412 Michelin X-Mine D2 12.00 R 24 700 318 $16,815


500B401 One auxiliary hydraulic service 15 7 $1,205

500B404 Two auxiliary hydraulic services 15 7 $1,792

OPERATORS AREA (E)

500C065 Cab with heater, tinted glass, front and rear wiper 1,150 522 $4,544

500C072 Canopy with clear right hand side glass 1,100 499 $2,100

SEATS (E)

500D111 Fabric suspension seat, includes 2" seatbelt, CAB ONLY 50 23 $702

500D115 Fabric suspension seat, includes 3" Seatbelt, CAB ONLY 50 23 $773

500D116 Vinyl suspension seat, includes 2" seatbelt, CANOPY ONLY 50 23 $552

500D117 Vinyl suspension seat, includes 3" Seatbelt CANOPY ONLY 50 23 $634

500D119 Air Suspension Seat -Deluxe Heated includes 2" seatbelt - CAB ONLY 77 35 $1,489

CARRIAGE (E)

500E400 No Carriage- includes mounting pins 50 23 $0

500E411 48" wide Q-Fit carriage with 2" fork shaft, (Use L409 Load Guard) 500 227 $1,955


500F606 Operators manual - English Language 5 2 $0

500F856 Operators manual - French 5 2 $0




existing machines.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



500K413 Deluxe cab trim including radio installation kit - manual steer mode selector 3 1 $520

500K465 Tilt and Telescopic Steering Column 20 9 $207

500K466 Sun blind, front windshield and roof 4 2 $226

500K470 Front windshield guard 10 5 $466

500K478 Face level fan 5 2 $194

500K507 Deluxe Cab Trim including radio installation - electrical steer mode selector 3 1 $1,299

500K543 Air conditioning 40 18 $3,535

ELECTRICAL OPTIONS

500G132 Front and Rear Worklights - CAB or CANOPY 70 32 $318

500G418 Front and Rear Roadlights (includes turn signals) - CAB 70 32 $1,043

500G438 Front and Rear Roadlights (includes turn signals) - CANOPY 70 32 $1,043

500H452 Engine block heater, 110-120 volt, 850 Watt 3 1 $231

500H500 4WD disconnect 33 15 $567

HYDRAULIC OPTIONS

500J401 Hydraulic Locking Pins for Q-Fit Carriage 14 6 $434


500H349 Limited Slip Differential (Front Axle only) 0 0 $748

500H524 Servo Assisted Brakes 40 18 $742

500L409 Loadguard (Use with Q-Fit carriage) 35 16 $537

500R401 Rear mounted 1 ton tow hitch 55 25 $211







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BUCKETS (Q-Fit mounted)

500E226 88" wide cutting edge, for use on all 88" wide buckets 150 68 PARTS

500E263 1.75 cu. yd, 96" wide scrap grapple, twin independent clamps 1,850 839 $7,768

500E422 2.25 cu. yd, 96" wide trash clamp bucket, single full width clamp 2,350 1,066 $8,914

500L118 1.1 cu. yd, 88" wide 6 in 1 Multipurpose bucket 1,630 739 $9,230

500L129 1.75 cu. yd, 96" wide GP bucket 1,005 456 $3,376

500L804 2.5 cu. yd, 96" wide light material bucket 1,310 594 $4,818

500L805 #N/A #N/A #N/A #N/A

500L810 96" wide cutting edge, for use on all 96" wide buckets 165 75 PARTS

500P105 2.25 cu. yd, 96" wide light material bucket 905 411 $3,850

CARRIAGES (Q-Fit mounted)

500Q800 48" wide side tilt carriage, 2-1/4" fork shaft 500 227 $5,817

500Q801 66" wide side tilt framers carriage with 2-1/4" fork shaft 550 249 $6,034

500Q802 48" wide side shift carriage with 2-1/4" fork shaft 500 227 $6,252

500Q803 66" wide side shift framers carriage with 2-1/4" fork shaft 550 249 $6,514

500Q804 60" wide ITA Class III industrial carriage, (Use with M808 forks) 200 91 $2,702

FORK SETS

500M106 48" x 4" x 2" pallet forks (2) for 2" fork shaft 250 113 $1,043


500M800 48" x 4" x 2" brick forks (2) for 2-1/4" fork shaft 250 113 $1,109

500M801 48" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 318 144 $1,433


500M803 72" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft, 6200lbs capacity at 36" load center 474 215 $1,945

500M804 48" x 2" x 2" block tines (6) for 2-1/4" fork shaft 462 210 $2,676

500M806 72" x 5" x 2" pallet forks (2) for 2" fork shaft, 5060lbs capacity at 36" load center 374 170 $1,685

500M807 48" x 2" x 1.5" block tines (6) for 2" fork shaft 336 152 $2,492

500M808 48" x 5" x 2" ITA class III forks 370 168 $1,589

OTHER ATTACHMENTS

500Q805 12' truss boom, 1400lbs capacity 400 181 $2,991

500Q806 Q-Fit blank 100 45 $709

500Q808 Angle broom, 96" wide 1,150 522 $10,510



JCB LOADALL

531-70T


MACHINE PRICE LIST

in U.S. Dollars




Tier 4i

531-70T LOADALL U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL One piece unitized mainframe with rigid frame and componentized driveline

ENGINE 109 HP T4i, dual element air cleaner, spin-on fuel filter,

Fuel/water separator, Anti-freeze protection to -35 degrees F.

TRANSMISSION JCB 4x4 Powershift, Powershuttle direction change, 20 mph travel speed, 2.2:1 ratio torque

converter, transmission disconnect on loader lever.

AXLES JCB MAX-TRAC with torque proportioning and outboard planetary drive.

BRAKES Internal mounted inboard on front axle, multi disc, oil immersed, self adjusting, Independent

disc type parking brake with brake on alarm and transmission disconnect.


Reverse alarm.



trans oil pressure, parking brake. Lift extend and tilt on single lever control.



and roof glass, rear view and external mirrors, horn, in-cab storage. Backup alarm meets SAE J994.


CANOPY UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, suspension seat with seat belt,

rear view mirror, horn, in-cab storage, backup alarm meets SAE J994, operation and


TIRES Choice of Options (none standard)

TELESCOPIC BOOM Two section, 23' lift height with hydraulic parallel lift, 6000 lbs. maximum lift capacity to full height.

CARRIAGE Choice of Options (none standard)

HYDRAULICS Single lever joystick with "Loader" pattern control. Open center system with 21.6 GPM.

Single auxiliary hydraulic service.







All prices and specifications subject to change without notice page 2 of 6 531-70T USD Price Page


PRICE PAGES

F.O.B.



SALES PACKAGE BUILD CODE: 5619B

CODE ITEM CAB/4WS

5619





500E411 48" wide Q-Fit carriage with 2" fork shaft, (Use L409 Load Guard)


500G422 Front and Rear Roadlights (includes turn signals) - CAB



500H349 Limited Slip Differential (Front Axle only)


500R401 Rear mounted 1 ton tow hitch





531-70T 4WD 4 Wheel steer, Telescopic handler, Rigid Frame, 109 hp Turbo, Powershift






PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

5619 531-70T 4WD 4 Wheel steer, Telescopic handler, Rigid Frame, 109 hp Turbo, Powershift 12,853 5,830 $93,025

TIRES (E)

500A407 Goodyear 17.5 LR24 Agricultural Traction Radial 600 272 $6,793



500A464 Michelin 500/70 R24 XMCL Agricultural Traction Floatation Radials 673 305 $8,045




OPERATORS AREA (E)



SEATS (E)






CARRIAGE (E)


500E411 48" wide Q-Fit carriage with 2" fork shaft, (Use L409 Load Guard) 500 227 $1,955







existing machines.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



500K148 Deluxe cab trim including radio installation kit with manual steer mode selector 3 1 $519




500K477 Fire extinguisher 10 5 $217


500K506 Deluxe cab trim including radio installation with electrical steer mode selector 3 1 $1,299


ELECTRICAL OPTIONS





500H475 Reversing Fan 10 5 $786

500H500 4WD disconnect 33 15 $567

HYDRAULIC OPTIONS




500H523 Servo Assisted Brakes 40 18 $742


TOW HITCH


500R403 Rear mounted 10 ton hydraulic tow hitch with hydraulics and electrics 250 113 $3,007







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.









500L805 #N/A #N/A #N/A #N/A









FORK SETS











OTHER ATTACHMENTS


500Q806 Q-Fit blank 100 45 $709




JCB LOADALL

535-140HiViz


MACHINE PRICE LIST

in U.S. Dollars




Tier 4i

535-140 LOADALL HiViz U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL One piece unitized mainframe with sway control, stabilizers and componentized driveline

ENGINE 109 HP T4i, Dual element air cleaner, spin-on fuel filter,

Fuel/water separator, Anti-freeze protection to -35 deg. F.




BRAKES Internal mounted multi-disc, oil immersed, Servo assisted hydraulic actuation, self adjusting,

Independent disc type parking brake with brake on alarm and transmission disconnect.







and roof glass, rear view mirror, horn, in-cab storage. Backup alarm meets SAE J994,


CANOPY UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, suspension seat with seat belt, tilt steering

column, rear view mirror, horn, in-cab storage, backup alarm meets SAE J994,

operation and parts manuals. Operation video.

TIRES Choice of Options available (none standard)

TELESCOPIC BOOM Three section, 45' 2" lift height with hydraulic parallel lift, 8000 lbs. maximum lift capacity, 2000 lbs. to

full height. Both boom sections extended by hydraulic cylinders.

CARRIAGE Choice of Options available (none standard)

HYDRAULICS Open center system with 29 GPM. Single auxiliary hydraulic service.









PRICE PAGES

F.O.B.





5678 535-140 HiViz 4WD 4WS, Sway Control and Stabilizers, 109HP

500A441 15.5-25 SGL(12 ply) Industrial tread bias ply, Calcium Chloride Ballast






500E006 48" Wide Q-Fit Carriage with 2 1/4" Fork Shaft (Use L409 Load Guard)




500K007 Deluxe Cab Trim Including Radio Installation Kit










PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

5678 535-140 HiViz 4WD 4WS, Sway Control and Stabilizers, 109HP 18,970 8,605 $125,145

TIRES (E)

500A441 15.5-25 SGL(12 ply) Industrial tread bias ply, Calcium Chloride Ballast 2,512 1,139 $6,904



OPERATORS AREA (E)



SEATS (E)






CARRIAGE (E)


500E006 48" Wide Q-Fit Carriage with 2 1/4" Fork Shaft (Use L409 Load Guard) 500 227 $1,942

500E007 66" Wide Q-Fit Framers Carriage with 2 1/4" Fork Shaft (Use L409 Load Guard) 500 227 $2,504

500P800 #N/A #N/A #N/A #N/A

500P801 #N/A #N/A #N/A #N/A







existing machines.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.






500K034 Air Conditioning 40 18 $3,535

500K007 Deluxe Cab Trim Including Radio Installation Kit 3 1 $503



ELECTRICAL OPTIONS


500H053 Electric 4WD disconnect 33 15 $581





HYDRAULIC OPTIONS

500J404 Hydraulic Pin Locking - Q-Fit Carriages 14 6 $434



500P817 Loadguard (Use with Side Tilt carriage) 35 16 $520







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.









500L805 #N/A #N/A #N/A #N/A










CARRIAGES (Boom mounted)

500P800 #N/A #N/A #N/A #N/A

500P801 #N/A #N/A #N/A #N/A

FORK SETS







OTHER ATTACHMENTS


500Q806 Q-Fit blank 100 45 $709



JCB LOADALL

541-70T


MACHINE PRICE LIST

in U.S. Dollars




Tier 4i


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL One piece unitized mainframe with rigid frame and componentized driveline

ENGINE 109 HP T4i, Dual element air cleaner,

spin-on fuel filter, Fuel/water separator, Thermostart assist, Anti-freeze protection to -35 deg. F.



AXLES JCB MAX-TRAC with torque proportioning and outboard planetary drive.

BRAKES Internal mounted inboard on front axle, multi disc, oil immersed, Servo assisted Hydraulic

actuation, self adjusting. Independent disc type parking brake with brake on alarm

and transmission disconnect.


Reverse alarm



trans oil pressure, parking brake, lift extend and tilt on single lever control.



and roof glass, rear view and external mirrors, horn, in-cab storage. Backup alarm meets SAE J994,

Operation video.

CANOPY UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, suspension seat with seat belt, rear view

mirror, horn, in-cab storage, backup alarm meets SAE J994, operation and parts manual

Operation video.


TELESCOPIC BOOM Two section, 23' lift height with hydraulic parallel lift, 9,000 lbs. Maximum lift capacity.


HYDRAULICS Single lever joystick with "Loader" pattern control. Open center system with 23.2 GPM. Single auxiliary

hydraulic service.









PRICE PAGES

F.O.B.



SALES PACKAGE BUILD CODE: 5624B 5624C

CODE ITEM CAB CAB / AC

5624 541-70T 4WD 4 Wheel steer, Telescopic handler, Rigid Frame, 109 hp Turbo, Powershift

500A463 Michelin 460/70 R24 XMCL Agricultural Traction Radials





500E415 48" wide Q-Fit carriage with 2-1/4" fork shaft, USE L409 Load Guard





500H349 Limited Slip Differential (Front Axle only)


500K547 Air Conditioning

500R401 Rear mounted 1 ton tow hitch










PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

5624 541-70T 4WD 4 Wheel steer, Telescopic handler, Rigid Frame, 109 hp Turbo, Powershift 14,485 6,570 $101,198

TIRES (E)



500A463 Michelin 460/70 R24 XMCL Agricultural Traction Radials 600 272 $7,281




OPERATORS AREA (E)



SEATS (E)






CARRIAGE (E)


500E415 48" wide Q-Fit carriage with 2-1/4" fork shaft, USE L409 Load Guard 500 227 $1,942







existing machines.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


TOW HITCH


500R403 Rear mounted 10 ton hydraulic tow hitch with hydraulics and electrics 250 113 $3,007








500K506 Deluxe cab trim including radio installation with electrical steer mode selector 3 1 $1,299


ELECTRICAL OPTIONS






500H500 4WD disconnect 33 15 $567

HYDRAULIC OPTIONS











PRICE PAGES

F.O.B.



SALES WEIGHT U.S.









500L805 #N/A #N/A #N/A #N/A










FORK SETS







OTHER ATTACHMENTS


500Q806 Q-Fit blank 100 45 $709




JCB LOADALL

550-140


MACHINE PRICE LIST

in U.S. Dollars




Tier 4i


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT


ENGINE 109 HP T4i, Dual element air cleaner, spin-on fuel

filter, Fuel/water separator, Anti-freeze protection to -35 deg. F.




BRAKES Internal mounted, multi-disc, oil immersed, Servo assisted hydraulic actuation, self adjusting.








and roof glass, rear view mirror, front worklights, horn, in-cab storage. Backup alarm meets

SAE J994, Operation and part manuals, operation video.

CANOPY UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, suspension seat with seat belt, tile steering,

rear view mirror, horn, in-cab storage, backup alarm meets SAE J994,

operation and parts manuals. Operation video.


TELESCOPIC BOOM Three section, 44' 3" lift height with hydraulic parallel lift, 10,000 lbs. Maximum lift capacity.

Boom sections extended by hydraulic cylinders.


HYDRAULICS Open center system with 29 GPM, single auxiliary hydraulic service.









PRICE PAGES

F.O.B.





5625

500A469 17.5-25 SGL(16 ply) Industrial tread bias ply, Calcium Chloride Ballast






500E414 66" wide Q-Fit Framers carriage with 2-1/4" fork shaft, (Use L409 Load Guard)









550-140 4WD 4 Wheel steer, Telescopic handler with sway control and Stabilizers, 109 hp






PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

5625 24,449 11,090 $140,080

TIRES (E)

500A469 17.5-25 SGL(16 ply) Industrial tread bias ply, Calcium Chloride Ballast 3,189 1,447 $8,441

500A473 17.5-25 SGL(12 ply) Industrial tread bias ply, NO BALLAST 3,189 1,447 $6,951



OPERATORS AREA (E)



SEATS (E)






CARRIAGE (E)


500E413 48" wide Q-Fit carriage with 2-1/4" fork shaft, (Use L409 Load Guard) 500 227 $1,942

500E414 66" wide Q-Fit Framers carriage with 2-1/4" fork shaft, (Use L409 Load Guard) 500 227 $2,504

500P800 #N/A #N/A #N/A #N/A

500P801 #N/A #N/A #N/A #N/A

500P802 72" Boom mounted swing carriage with 2-1/4" fork shaft 1,025 465 $8,467




550-140 4WD 4 Wheel steer, Telescopic handler with sway control and Stabilizers, 109 hp




existing machines.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.







500K508 Deluxe cab trim including radio installation kit with electrical steer mode selector 3 1 $1,299



ELECTRICAL OPTIONS


500H316 4WD disconnect 33 15 $581





HYDRAULIC OPTIONS

500J404 Hydraulic Pin Locking - Q-Fit Carriages 14 6 $434



500P817 Loadguard (Use with Side Tilt carriage) 35 16 $520


A COMPLETE LINE OF HIGH QUALITY RADIO & OBSERVATION SYSTEMS IS AVAILABLE THROUGH JCB AFTERMARKET

ACCESSORIES. CONTACT YOUR PARTS DEPARTMENT FOR COMPLETE DETAILS AND REFER TO TECHWEB BULLETIN

3441.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.









500L805 #N/A #N/A #N/A #N/A











500P800 #N/A #N/A #N/A #N/A

500P801 #N/A #N/A #N/A #N/A


FORK SETS







OTHER ATTACHMENTS


500Q806 Q-Fit blank 100 45 $709



JCB LOADALL

550-170


MACHINE PRICE LIST

in U.S. Dollars




Tier 4i


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT


ENGINE 109 HP T4i, Dual element air cleaner, spin-on fuel

filter, Fuel/water separator, Thermostart assist, Anti-freeze protection to -35 deg. F.




BRAKES Internal mounted, multi-disc, oil immersed, Servo assisted hydraulic actuation, self adjusting.








and roof glass, rear view mirror, horn, in-cab storage. Backup alarm meets SAE J994,

Operation and part manuals, operation video.

CANOPY UNIT Meets SAE J231 FOPS/SAE J1040 ROPS requirements, suspension seat with seat belt, tile steering,

column, rear view mirror, horn, in-cab storage, backup alarm meets SAE J994, operation and


TIRES 17.5 - 25 (16 ply) Industrial Tread Bias Ply - NO BALLAST

TELESCOPIC BOOM Three section, 54' 9" lift height with hydraulic parallel lift, 10,000 lbs. Maximum lift capacity. Boom

sections extended by hydraulic cylinders.


HYDRAULICS Open center system with 42.8 GPM, single auxiliary hydraulic service.









PRICE PAGES

F.O.B.





5626

500A435 17.5-25 (16 ply) Industrial Tread Bias ply, NO BALLAST

500B474 One servo auxiliary hydraulic service





500E400 No Carriage- includes mounting pins

500P803 66" wide Q-Fit Framers carriage with 2-1/4" fork shaft







500G471 Front and Rear Roadlights (includes turn signals) - CANOPY




550-170 4WD / 4WS Telescopic Handler with Sway Control and Stabilizers, 109hp






PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

5626 27,494 12,471 $149,866

TIRES (E)

500A435 17.5-25 (16 ply) Industrial Tread Bias ply, NO BALLAST 1,650 748 $11,384


500B474 One servo auxiliary hydraulic service 15 7 $4,473

OPERATORS AREA (E)



SEATS (E)






CARRIAGE (E)


500E425 48" wide Q-Fit carriage with 2-1/4" fork shaft, NEW FACTORY BUILT ORDERS (Use L409 Load Guard) 500 227 $1,942

500P803 66" wide Q-Fit Framers carriage with 2-1/4" fork shaft 500 227 $3,568

500P804 48" Boom mounted side tilt Q-fit carriage with 2-1/4" fork shaft, (Use P817 loadguard) 650 295 $8,039

500P805 66" Boom mounted Framers side tilt Q-fit carriage with 2-1/4" fork shaft, (Use P817 loadguard) 700 318 $8,374





550-170 4WD / 4WS Telescopic Handler with Sway Control and Stabilizers, 109hp




existing machines.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.







500K535 Deluxe cab trim including radio installation kit with electrical steer mode switch 3 1 $1,299



ELECTRICAL OPTIONS **


500H518 Electrical 4 wheel drive disconnect 35 16 $580




HYDRAULIC OPTIONS

500J405 Hydraulic Pin Locking 14 6 $434







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.









500L805 #N/A #N/A #N/A #N/A











500P804 48" Boom mounted side tilt Q-fit carriage with 2-1/4" fork shaft, (Use P817 loadguard) 650 295 $8,039

500P805 66" Boom mounted Framers side tilt Q-fit carriage with 2-1/4" fork shaft, (Use P817 loadguard) 700 318 $8,374


FORK SETS







OTHER ATTACHMENTS


500Q806 Q-Fit blank 100 45 $709



ROUGH TERRAIN FORKLIFT

JCB ROUGH TERRAIN FORKLIFT

930 RTFL


MACHINE PRICE LIST

in U.S. Dollars




930 RTFL FORKLIFT U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL One piece unitized mainframe with componentized driveline

ENGINE 4.4L (268 CID), 74 SAE GROSS HP, Turbo, Dual element air cleaner, spin-on fuel

filter, Fuel/water separator, Engine block heater, Thermostart assist, Anti-freeze protection to -35 deg. F.

TRANSMISSION - 2WD JCB 4x2 Synchroshuttle, synchronized shifting in all gears, powershuttle direction change, 2.2:1 ratio

torque converter.

TRANSMISSION - 4WD JCB 4x4 Synchroshuttle, synchronized shifting in all gears, powershuttle direction change, 2WD/4WD

Selection. 2.2:1 ratio torque converter.

AXLES - 2WD Front JCB MAX-TRAC with torque proportioning and outboard planetary drive.

AXLES - 4WD Front and rear JCB MAX-TRAC with torque proportioning and outboard planetary drive.

BRAKES Internal mounted inboard on front axle, multi disc, oil immersed, hydraulic actuation, self-adjusting



INSTRUMENTS Audible and visual warning system, hourmeter, Fuel Gauge, Coolant temp. gauge, warning lights

for battery charge, air cleaner restriction, engine oil pressure, engine coolant temp.,

trans oil pressure, parking brake, indicators for lights, hazard lights, turn signals (if fitted).

CAB UNIT Meets ANSI B56.6 FOPS, deluxe trim, fixed seat with seat belt. Heater with defroster vent system,

windshield wipers and washers for front/rear and roof glass, front worklight, horn, in-cab storage,

3" seatbelt. Backup alarm meets SAE J994, Operation manual.

CANOPY UNIT Meets ANSI B56.6 FOPS, fixed seat with seat belt, front worklights, horn, in-cab storage,

3" seatbelt, backup alarm meets SAE J994, Operation manual (no rear glass, no rear fenders).

TIRES - 2WD Front: 15.5 - 25 (8 ply) Sure Grip Lug, Rear: 14.5/75 - 16.1 (10 ply) Laborer.

TIRES - 4WD Front: 15.5 - 25 (8 ply) Sure Grip Lug, Rear: 14 - 17.5 - (10 ply) Traction.

HYDRAULICS Open center system with 14.5 GPM.






DEALER FIT - RTFL (LISTED SEPARATELY FOR ALL RTFLS)

All prices and specifications subject to change without notice page 2 of 6 930 RTFL USD Price Page


PRICE PAGES

F.O.B.

SAVANNAH,

GA


SECTION 1 - PACKAGE BUILD SECTION 1 - PACKAGE BUILD & MAST/CARRIAGE COMBINATIONS


SALES CANOPY CANOPY

CODE ITEM 2WD 4WD

7123 930 2WD 6000lb capacity Straight Mast Rough Terrain Forklift


700A111 Front: 15.5-25 (8 ply) Industrial, Rear: 14- 17.5(10 ply) Laborer

700A205 Front: 15.5-25 (12 ply) Industrial, Rear: 14-17.5 (10 ply) Traction

700B225 No Mast

700C126 Canopy with roof glass, wiper and front screen guard

700D135

700E100 No Carriage

700F116 Operators manual

700R101 Vinyl static seat for CANOPY



SUGGESTED LIST PRICE (EXCLUDES MAST AND CARRIAGE) $54,858 $64,992

Sideshift hydraulics and one auxiliary hydraulic circuit (May require hose kit depending on application.

See hose kits in Dealer Fit section)

Select one of the following machine PACKAGE BUILDS AND a Mast and Carriage COMBO code from the section 4 from page 6. To

provide Dealers with our best availability and greatest flexibility, Mast and Carriage Combinations are installed to order.

If the Package Build combination shown on this page does not meet your requirements, please order a machine using the Custom Build

Sections following.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

7123 9,380 4,264 $45,955

7124 930 4WD 6000lb capacity Straight Mast Rough Terrain Forklift 9,720 4,418 $56,279

TIRES (E)

2-Wheel Drive Tire Sets

700A111 Front: 15.5-25 (8 ply) Industrial, Rear: 14- 17.5(10 ply) Laborer 600 273 $4,950


700A205 Front: 15.5-25 (12 ply) Industrial, Rear: 14-17.5 (10 ply) Traction 700 318 $4,761

NO MAST (E)

700B225 No Mast 0 0 $0

OPERATORS AREA (E)

700C126 Canopy with roof glass, wiper and front screen guard 1,100 500 $3,187

700C123 Cab with heater, tinted glass, roof glass and rear window wiper 1,150 523 $6,077

HYDRAULICS (E)

700D134 Sideshift hydraulics 50 23 $197

700D135 50 23 $597

NO CARRIAGE (E)

700E100 No Carriage 0 0 $0


700F116 Operators manual 5 2 $0

700F117 Operators manual French 5 2 $0

SEATS (E)

700R101 Vinyl static seat for CANOPY 20 9 $169

700R103 Vinyl Suspension Seat for CANOPY 65 30 $429

700R102 Cloth Static Seat for CAB 20 9 $169

700R104 Cloth Suspension Seat for CAB 65 30 $429

Sideshift hydraulics and one auxiliary hydraulic circuit (May require hose kit depending on application.

See hose kits in Dealer Fit section)

930 2WD 6000lb capacity Straight Mast Rough Terrain Forklift




existing machines.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



700K105 Exterior Mirrors 8 4 $240

700K106 Rear View Mirror (internal) - - $32



OTHER ELECTRICAL OPTIONS

700G107 Front and Rear Roadlights including Turn Signals 42 19 $810


700R107 Engine pre cleaner 15 7 $152

700N107 Rear fenders 40 18 $445




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


MAST AND CARRIAGE COMBINATIONS

700XC05 22' Clearview, Triplex w/ 66" Floating Shaft Carriage 2,913 1,324 $13,946

700XC07 22' Clearview, Triplex w/ 60" Class III ITA Carriage 2,963 1,347 $13,470

700XC06 22' Clearview, Triplex w/ 84" Floating Shaft Carriage 2,983 1,356 $14,652

700XC08 22' Clearview, Triplex w/ 72" Class III ITA Carriage 3,037 1,380 $14,288

700XC01 15' Freelift, Triplex w/ 66" Floating Shaft Carriage 2,573 1,170 $15,730

700XC03 15' Freelift, Triplex w/ 60" Class III ITA Carraige 2,622 1,192 $15,365

700XC04 15' Freelift, Triplex w/ 72" Class III ITA Carraige 2,697 1,226 $16,688




700XC11 22' Freelift Triplex, w/ 60" Class III ITA Carriage 3,025 1,375 $17,368

700XC12 22' Freelift Triplex, w/ 72" Class III ITA Carriage 3,098 1,408 $18,531

FORK SETS



700M810 72" x 5" x 2" ITA class III forks 10,000lb cap. 500 227 $1,732

700M512 60" x 4" x 2" pallet forks (2) for 2" fork shaft 8,000lb cap. 282 128 $1,374



HOSE KITS

700XE10 Single Internal Hose Kit for 6,000lb - 22' Clearview Masts 44 20 $1,339

700XE11 Single Internal Hose Kit for 6,000lb - 15' FL Masts 25 11 $1,205

700XE12 Single Internal Hose Kit for 6,000lb - 22' FL Masts 30 14 $1,339

Select ONE mast and carriage combination and ONE fork set per machine order


SECTION 3 - DEALER FIT


940 RTFL


PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT



filter, Fuel/water separator, Thermostart assist, Engine block heater, Anti-freeze protection to -35 deg. F.

TRANSMISSION - 2WD JCB 4x2 Synchroshuttle, synchronized shifting in all gears, powershuttle direction change, 2.2:1 ratio

torque converter.



AXLES - 2WD Front JCB MAX-TRAC with torque proportioning and outboard planetary drive.











CANOPY UNIT Meets ANSI B56.6 FOPS, fixed seat with seat belt, front worklights, horn, in-cab storage, 3" seatbelt,

backup alarm meets SAE J994, Operation manual (no rear glass, no rear fenders).

TIRES - 2WD Front: 15.5 - 25 (12 ply) Sure Grip Lug, Rear: 12.5/80 - 18 (10 ply)











PRICE PAGES

F.O.B.




SALES CANOPY CANOPY

CODE ITEM 2WD 4WD



700A111 Front: 15.5-25 (8 ply) Industrial, Rear: 14- 17.5(10 ply) Laborer


700B226 No Mast

700C126 700C126

700D135

700E100 No Carriage

700F118 Operators Manual US




SUGGESTED LIST PRICE (EXCLUDES MAST AND CARRIAGE) $60,334 $70,110

Sideshift hydraulics and one auxiliary hydraulic circuit (May require hose kit depending on application. See

hose kits in Dealer Fit section)




Sections following.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)



TIRES (E)


700A111 Front: 15.5-25 (8 ply) Industrial, Rear: 14- 17.5(10 ply) Laborer 600 273 $4,950


700A205 Front: 15.5-25 (12 ply) Industrial, Rear: 14-17.5 (10 ply) Traction 700 318 $4,761

NO MAST (E)

700B226 No Mast 0 0 $0

OPERATORS AREA (E)

700C126 Canopy with roof glass, wiper and front screen guard 1,100 500 $3,187

700C123 Cab with heater, tinted glass, roof glass and rear window wiper 1,150 523 $6,077

HYDRAULICS (E)

700D202 Sideshift hydraulics 50 23 $195

700D135 50 23 $597

NO CARRIAGE (E)

700E100 No Carriage 0 0 $0


700F118 Operators Manual US 5 2 $0

700F119 Operators Manual French 5 2 $0

SEATS (E)

700R101 Vinyl static seat for CANOPY 20 9 $169

700R103 Vinyl Suspension Seat for CANOPY 65 30 $429

700R102 Cloth Static Seat for CAB 20 9 $169

700R104 Cloth Suspension Seat for CAB 65 30 $429






existing machines.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



700K105 Exterior Mirrors 8 4 $240

700K106 Rear View Mirror (internal) 0 0 $32




700G107 Front and Rear Roadlights including Turn Signals 42 19 $810


700R109 Engine pre cleaner 15 7 $152

700N107 Rear fenders 40 18 $445




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.



700XD05 22' Clearview, Triplex w/ 66" Floating Shaft Carriage 4,193 1,906 $17,544

700XD07 22' Clearview, Triplex w/ 60" Class III ITA Carriage 4,220 1,918 $17,558

700XD06 22' Clearview, Triplex w/ 84" Floating Shaft Carriage 4,268 1,940 $18,628

700XD08 22' Clearview, Triplex w/ 72" Class III ITA Carriage 4,294 1,952 $18,794

700XD01 15' Freelift, Triplex w/ 66" Floating Shaft Carriage 3,342 1,519 $18,556

700XD03 15' Freelift, Triplex w/ 60" Class III ITA Carraige 3,374 1,534 $18,929

700XD04 15' Freelift, Triplex w/ 72" Class III ITA Carraige 3,448 1,567 $19,823



700XD11 22' Freelift Triplex, w/ 60" Class III ITA Carriage 3,975 1,807 $20,647


700XD12 22' Freelift Triplex, w/ 72" Class III ITA Carriage 4,049 1,840 $22,062

FORK SETS


700M810 72" x 5" x 2" ITA class III forks 10,000lb cap. 500 227 $1,732


700M802 60" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 10,000lb cap. 362 165 $1,685



HOSE KITS

700XE13 Single Internal Hose Kit for 8,000 & 10,000lb - 22' Clearview Masts 44 20 $1,339

700XE14 Single Internal Hose Kit for 8,000 & 10,000lb - 15' FL Masts 25 11 $1,205

700XE15 Single Internal Hose Kit for 8,000 & 10,000lb - 22' FL Masts 30 14 $1,339



SECTION 3 - DEALER FIT


950 RTFL


PRICE LIST

in U.S. Dollars





PRICE PAGES

F.O.B.


STANDARD EQUIPMENT



filter, Fuel/water separator, Thermostart assist, Engine block heater, Anti-freeze protection to -35 deg. F.













CANOPY UNIT Meets ANSI B56.6 FOPS, fixed seat with seat belt, front worklights, horn, in-cab storage, 3" seatbelt,

backup alarm meets SAE J994, Operation manual (no rear glass, no rear fenders).











PRICE PAGES

F.O.B.




SALES CANOPY

CODE ITEM 4WD



700B226 No Mast

700C126 Canopy with roof glass, wiper and front screen guard

700D135

700E100 No Carriage

700F118 Operators Manual US


700R109 Engine pre cleaner

SUGGESTED LIST PRICE (EXCLUDES MAST AND CARRIAGE) $77,287






Sections following.



PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST

BASE MACHINE (E)

7227 950 4WD 10000lb capacity Straight Mast Rough Terrain Forklift $68,422

TIRES (E)


700A205 Front: 15.5-25 (12 ply) Industrial, Rear: 14-17.5 (10 ply) Traction $4,761

NO MAST (E)

700B226 No Mast $0

OPERATORS AREA (E)

700C126 Canopy with roof glass, wiper and front screen guard $3,187

700C123 Cab with heater, tinted glass, roof glass and rear window wiper $6,077

HYDRAULICS (E)

700D202 Sideshift hydraulics $195

700D135 $597

NO CARRIAGE (E)

700E100 No Carriage $0


700F118 Operators Manual US $0

700F119 Operators Manual French $0

SEATS (E)

700R101 Vinyl static seat for CANOPY $169

700R103 Vinyl Suspension Seat for CANOPY $429

700R102 Cloth Static Seat for CAB $169

700R104 Cloth Suspension Seat for CAB $429

Sideshift hydraulics and one auxiliary hydraulic circuit (May require hose kit depending on application. See hose

kits in Dealer Fit section)




existing machines.



PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST


700K105 Exterior Mirrors $240

700K106 Rear View Mirror (internal) $32




700G107 Front and Rear Roadlights including Turn Signals $810


700R109 Engine pre cleaner $152

700N119 Rear fenders $445




PRICE PAGES

F.O.B.



SALES U.S.

CODE ITEM LIST


700XF10 22' Clearview, Triplex w/ 66" Floating Shaft Carriage $19,308

700XF12 22' Clearview, Triplex w/ 60" Class III ITA Carriage $19,330

700XF11 22' Clearview, Triplex w/ 84" Floating Shaft Carriage $20,492

700XF13 22' Clearview, Triplex w/ 72" Class III ITA Carriage $20,674

700XF18 22' Freelift, Triplex w/ 66" Floating Shaft Carriage $23,275


700XF20 22' Freelift Triplex, w/ 60" Class III ITA Carriage $23,743

700XF21 22' Freelift Triplex, w/ 72" Class III ITA Carriage $24,863



700XF16 15' Freelift, Triplex w/ 60" Class III ITA Carraige $21,368

700XF17 15' Freelift, Triplex w/ 72" Class III ITA Carraige $22,377

FORK SETS

700M808 48" x 5" x 2" ITA class III forks $1,589

700M810 72" x 5" x 2" ITA class III forks 10,000lb cap. $1,732

700M801 48" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft $1,433

700M802 60" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft 10,000lb cap. $1,685

700M803 72" x 5" x 2" pallet forks (2) for 2-1/4" fork shaft, 6200lbs capacity at 36" load center $1,944

700M804 48" x 2" x 2" block tines (6) for 2-1/4" fork shaft $2,598

HOSE KITS

700XE13 Single Internal Hose Kit for 8,000 & 10,000lb - 22' Clearview Masts $1,339

700XE14 Single Internal Hose Kit for 8,000 & 10,000lb - 15' FL Masts $1,205

700XE15 Single Internal Hose Kit for 8,000 & 10,000lb - 22' FL Masts $1,339



FASTRAC

JCB FASTRAC

3230 XTRA

TIER 4i

MACHINE PRICE LIST



EFFECTIVE: MAY 1ST, 2013


in U.S. Dollars

Fastrac

3230 XTRA FASTRAC - TIER 4i U.S. DOLLAR

PRICE PAGES

F.O.B.

SAVANNAH, GAEFFECTIVE: MAY 1ST, 2013

STANDARD EQUIPMENT

GENERAL

ENGINE

TRANSMISSIONmounted joystick and 4 modes of operation. 0-43 mph.

PTO

AXLES

TIRES

STEERING

BRAKES

SUSPENSION

capacity of 551 lbs. (2500Kg).

CAB

REAR HITCH

DRAWBAR Heavy Duty Drawbar

HYDRAULICS 37 gal/min maximum oil flow @ 3000 psi. 4 rear electronic controlled spool valves. All with 4 position

double acting valves with flow and time control, float position, switchable kick out and zero leak.

In addition an optional power beyond circuit offers maximum pump flow on demand with load sensing.

LIGHTS Full road lighting including 2 front mounted halogen headlights, 4 hazard/turn signals, 8 front and

6 rear work lights, 2 rear brake/tail and reverse lights.

ELECTRICAL 12 volt electrical system to IP67 standard, two 12 volt batteries (815 CCA each), 150 amp alternator,

OTHER STANDARD Performance monitor with radar, operators handbook, 92 gallon fuel tank, 28 gallon hydraulic tank,

EQUIPMENT external rear hitch controls and PTO stop. Lockable storage compartment.

electronic transmission control, ash tray and cigar lighter, auxiliary 12 volt power socket, truck type rear view

Trelleborg 540/65 R34 TM800 front and rear tires.

Full width ROPS cab, air conditioning, heater, dust filter, tinted glass, air suspension seat,

Electro-hydraulic soft engage front and rear differential locks.

ABS air over hydraulic actuation, twin calliper outboard disc brakes on all 4 wheels, spring on air off

Front 3 link suspension with coil springs and shock absorbers, rear hydraulic self levelling with a load

Recirculating ball, power assisted. Tilt and telescope adjustable steering column

auxiliary 7 pin lighting socket (to SAE J560), in cab 12 volt socket.

parking brake, air drier element for cold climate operation.

15430 LBS / 7000Kg lift capacity category III linkage with electronic control, fender mounted remote

view mirrors, front and rear windscreen wash wipe, tilt and telescope adjustable steering column.

passenger seat, seat belts, digital instrumentation, monitoring and warning system,

190 PTO Hp, independent rear 540 and 1000 rpm., 1-3/4" 20 spline (optional) and 1-3/8" (6 and

Beam type axles with epicyclic outboard reduction hubs. Electro-hydraulic 4wd spring on pressure off.

Agricultural tractor with full suspension and 42mph (65Km/h) travel speed.

SISU 7.4 Liter TIER 4i, 220 Max Hp. 1015Nm torque @ 1500 rpm. Dual dry element air filter.

Engine block heater. Vertical 'A' post exhaust, foot and hand throttle.

JCB 4 range, 6 speed powershift with powered range changes. Electronic control with an arm rest

21 spline) PTO shafts. Electro-hydraulic actuation.





Section 4 - ATTACHMENTS - NEW FACTORY BUILT ORDERS - (NO ATTACHMENTS CURRENTLY OFFERED)

DEALER FIT - FASTRAC (NO DEALER FIT ITEMS CURRENTLY OFFERED)

All prices and specifications subject to change without notice 2 of 5 3230 XTRA FASTRAC USD Price Page


PRICE PAGES

F.O.B.



SALES PACKAGE BUILD CODE: 3687A

CODE ITEM 3230 XTRA

3687

130A606 USA Operators manual

130B684 Transmission rear PTO only (540/1000 rpm)

130C646 540/65 R34 Trelleborg TM800 Tires 80" track width

130D618 Cat 3 rear linkage with electronic control. 15430lb/7000Kg

130E657 4 Spool auxiliary hydraulics without front linkage

130F630 Heavy duty drawbar frame

130G612 Heavy duty drawbar for use with 130F630

130J607 Front weights for Fastrac without front linkage (1980 lbs.)

130K603 CAT 3 - 2 conversion balls

130L610 12volt accessory power socket

130L636 Twin Electrically Adjustable Mirrors

130L638 Worklights. 8 front and 6 rear

130L640 Performance monitor with radar

130M605 1.75" 20 spline PTO adapter

130M618 Smokers pack - ash tray and cigar lighter

130M625 Deluxe Heated Air Suspension Seat

130N669 GPS Auto Steer ready package - Trimble compatible system

130N676 Hydraulic trailer brakes




Fastrac 3230-65 XTRA 4wd tractor with 220 Hp SISU 7.4 liter TIER 4i engine,

JCB 6 X 4 Powershift transmission, 37 gal/min hyd. pump, air suspension

drivers and fixed passenger seats c/w seat belts, heater, air conditioning and

electrical block heater

Select one of the following PACKAGE BUILD codes. Selections from SECTION 4 (OPTIONS) may be added but no

deletions are allowed.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

3687 13,581 6173 $188,490

COUNTRY CODE (E)

130A606 USA Operators manual 2 1 $0

GEARBOX (E)

130B684 Transmission rear PTO only (540/1000 rpm) 0 0 $2,830

130B686 Transmission front and rear PTO - single output front PTO 275 125 $8,489

WHEELS (E)

130C631 540/65 R34 Front Tires and 600/70 R30 Rear Tires 1,158 526 $12,664

130C645 540/65 R30 Front Tires and 600/65 R28 Rear Tires 920 418 $6,129

130C646 540/65 R34 Trelleborg TM800 Tires 80" track width 1,632 742 $8,240

130C649 540/65 R30 Nokian TRI-2 Tires 920 418 $11,330

REAR LINKAGE (E)

130D618 Cat 3 rear linkage with electronic control. 15430lb/7000Kg 1,012 460 $10,659

FRONT LINKAGE & AUXILIARY HYDRAULICS

130E657 4 Spool auxiliary hydraulics without front linkage 110 50 $2,154

130E658 4 Spool auxiliary hydraulics with front linkage 7716lb/ 1,320 600 $9,140

REAR TRAILER HITCH (E)

130F624 Pick up hitch 330 150 $3,313

130F630 Heavy duty drawbar frame 330 150 $2,282

COMPLETING PACKAGE (E)

130G601 Completeing pack - for use with 130F624 0 0 $0

130G612 Heavy duty drawbar for use with 130F630 0 0 $1,030

Fastrac 3230-65 XTRA 4wd tractor with 220 Hp SISU 7.4 liter TIER 4i engine, JCB 6 X 4

Powershift transmission, 37 gal/min hyd. pump, air suspension drivers and fixed passenger seats

c/w seat belts, heater, air conditioning and electrical block heater

If not ordering a Package Build Unit from Section 1, select one code from each ESSENTIAL (E) category below. Select

FACTORY FIT Options from Section 4.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


HYDRAULIC OPTIONS

130H620 Heavy duty rear suspension cylinders - 7165lb/3250Kg capacity 11 5 $672

130H622 Front free flow return 2 1 $351

130H623 Front auxiliary hydraulics tee into spool No. 3 7 3 $704


130H625 Power beyond Load Sensing Hydraulic Circuit 9 4 $1,363

130H618 Green spool priority flow option 2 1 $1,202

130N676 Hydraulic trailer brakes 7 3 $991

ADDITIONAL WEIGHT OPTIONS

130J607 Front weights for Fastrac without front linkage (1980 lbs.) 1,980 900 $2,388

130J602 Front weights for Fastrac with front linkage (1980 lbs.) 1,980 900 $2,388

130J603 Rear deck weight - 2200lbs - Factory Installed option only 2,200 1,000 $3,167

REAR LINKAGE OPTIONS

130K601 Hook end top link 22 10 $137

130K603 CAT 3 - 2 conversion balls 2 1 $66

130K607 Heavy duty lift cylinders 3.6"/90mm (17637lbs lift capacity) 22 10 $531

OTHER OPTIONS

130L640 Performance monitor with radar 4 2 $1,806

130L634 Heated Windshield and Mirrors 6 3 $2,961

130L636 Twin Electrically Adjustable Mirrors 2 1 $529

130L629 LH forward/reverse lever 2 1 $219

130L638 Worklights. 8 front and 6 rear 20 9 $710

130L610 12volt accessory power socket 2 1 $132

130M605 1.75" 20 spline PTO adapter 2 1 $330

130L635 Xenon Worklights - 8 Front and 6 Rear Lights including 2 front xenon and 2 rear xenon lights 20 9 $3,830

130M625 Deluxe Heated Air Suspension Seat 10 5 $451

130N669 GPS Auto Steer ready package - Trimble compatible system 15 7 $2,318

Select Optional (O) equipment as desired within limitations if indicated. These items may be added to any PACKAGE BUILD

or CUSTOM BUILD machine if not already included.


JCB FASTRAC

8280

MACHINE PRICE LIST





in U.S. Dollars

Fastrac

8280 FASTRAC U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL

CAB

ENGINE

TIRES

TRANSMISSIONand high range 0 - 42 mph. Arm rest mounted joystick and touch screen control.

PTO

AXLES

REAR HITCH

BRAKES

SUSPENSION

capacity of 5,511 lbs (2,500 Kg).

STEERING

HYDRAULICS 55 gal/min maximum oil flow @ 3000 psi. 4 rear electronic controlled spool valves, all with 4 position


In addition a power beyond circuit offers maximum pump flow on demand with load sensing.







New full width ROPS cab, climate control, heater, dust filter, tinted glass, air suspension seat,

JCB V-Tronic 2 range Continually Variable Transmission with 4 modes of operation. Low range 0 - 28 mph

245 max PTO Hp, independent rear 540 and 1000 rpm., 1-3/4" 20 spline (optional) and 1-3/8" (6 and 21 spline)


22,046 LBS / 10,000 Kg lift capacity category III linkage with electronic control, fender mounted remote.

JCB Fastrac agricultural tractor with full suspension and 43mph travel speed.

SISU 8.4 Litre, 279 Max Hp. 1195 Nm torque. Powercore dry element air filter. Engine block heater. Vertical 'A'

exhaust, foot and hand throttle.


electronic transmission control, ash tray and cigar lighter, auxiliary 12 volt power socket, electrically



steering column

Trelleborg 540/65 R38 front and 650/75 R38 rear tires.

adjustable mirrors front and rear, windscreen wash wipe, tilt and telescope adjustable steering column.



Recirculating ball with hydraulic power assistance and assistor ram. Tilt and telescope adjustable

PTO shafts. Electro-hydraulic actuation. Optional front PTO available, 1000 rpm only








All prices and specifications subject to change without notice 2 of 5 8280 FASTRAC USD Price Page


PRICE PAGES

F.O.B.




CODE ITEM 8280

3802

130A828 North American operators manual

130B803 No Front PTO

130C806 Trelleborg 540/65 R38 front and 650/75 R38 rear tires.

130D808 4 rear auxiliary hydraulic spool valves - 55gpm

130E802 Heavy duty drawbar

130F801 North American completing package

130G809 GPS Auto Steer ready package - Trimble compatible system

130K802 CAT 3 - 2 linkage conversion balls

130L804 12V accessory power supply sockets

130L818 Field performance package including radar and Activ



130M802 Rear 1¾" 20 spline PTO shaft

130M808 Mirror - Interior Rear View

130M814 Single line hydraulic trailer brakes

130M816 Cab air filter, heavy duty remote mounted with inlet snorkel




Fastrac 8280 4wd tractor with 279 max Hp SISU 8.4 liter, tier 4i engine using

SCR technology, 2 range CVT transmission, air operated disc brakes with ABS

on all four wheels, air suspension driver's and fixed passenger seats c/w seat

belts, heater, air conditioning and block heater and full road lights





PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

3802 22,274 10,125 $242,794


130A828 2 1 $0

PTO (E)

130B803 0 0 $0

130B804 159 72 $7,401


130C802 0 0 $265

130C804 0 0 $530

130C805 496 225 $7,535

130C806 476 216 $5,835

REAR HYDRAULICS AND FRONT LINKAGE (E)

130D808 15 7 $3,170

130D809 810 368 $10,442

130D810 2 1 $1,105

130D811 15 7 $2,123

130D812 810 368 $9,395


130E801 110 50 $3,866

130E802 150 68 $3,866

130E810 0 0 $0


130F801 0 0 $0

AUTOSTEER (E)

130G809 45 20 $4,191

North American completing package

GPS Auto Steer ready package - Trimble compatible system

4 rear auxiliary hydraulic spool valves and front linkage - 37gpm

Pickup hitch and PTO drawbar

Heavy duty drawbar

No drawbar

3 rear auxiliary hydraulic spool valves - 37gpm


Trelleborg 540/65 R34 front and 650/65R38 rear tires.

Trelleborg 540/65 R34 front and 650/65R38 rear tires. Wide Track.



Fastrac 8280 4wd tractor with 279 max Hp SISU 8.4 liter, tier 4i engine using SCR technology, 2

range CVT transmission, air operated disc brakes with ABS on all four wheels, air suspension

driver's and fixed passenger seats c/w seat belts, heater, air conditioning and block heater and full

road lights

North American operators manual

No Front PTO

Front PTO - 1000 rpm, 13/8" 21 spline shaft rotates clockwise







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


HYDRAULIC OPTIONS

130H806 Front Auxiliary hydraulics - connected into rear spool number 3 20 9 $693


130H808 Front Auxiliary return line 10 5 $346

130H809 Power beyond, load sensing hydraulic circuit - for 55gpm hydraulic pump 25 11 $1,363


130M814 Single line hydraulic trailer brakes 10 5 $977


130J803 Front weight, 1900lbs. Front linkage mount 1,980 900 $2,599

130J804 Front weight, 3300lbs. Front linkage mount 3,300 1,500 $4,191

130J808 Rear weight - 1800lbs - Factory Installed option only 1,800 818 $5,145

130J812 Front weight, 1900lbs. Chassis mount 1,980 900 $2,599

130J813 Front weight, 3300lbs. Chassis mount 3,300 1,500 $4,191


130K801 Knuckle end top link 2 1 $160

130K802 CAT 3 - 2 linkage conversion balls 2 1 $65

CAB OPTIONS

130L804 12V accessory power supply sockets 2 1 $132

130L816 Left Hand Column Forward/Reverse lever 2 1 $219

130L818 Field performance package including radar and Activ Traction 5 2 $1,806

130L819 Heated windshield and mirrors 6 3 $2,902

130L820 Auxiliary Headlights 4 2 $796



130L826 Camera with color screen - rear drawbar and hitch view 5 2 $2,599


130M808 Mirror - Interior Rear View 2 1 $164

130M809 Monitor Mounting Rail 2 1 $530

130M812 Heat reducing glass treatment 1 0 $4,509

130M816 Cab air filter, heavy duty remote mounted with inlet snorkel 2 1 $0

OTHER OPTIONS

130M802 Rear 1¾" 20 spline PTO shaft 2 1 $326


130M804 DIN 3 plate for front linkage 60 27 $1,271

Select Optional (O) equipment as desired within limitations if indicated. These items may be added to any PACKAGE

BUILD or CUSTOM BUILD machine if not already included.


JCB FASTRAC

8310

MACHINE PRICE LIST





in U.S. Dollars

Fastrac


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL

CAB

ENGINE

TIRES


PTO

AXLES

REAR HITCH

BRAKES

SUSPENSION


STEERING



















SISU 8.4 Litre, 306 Max Hp. 1310 Nm torque. Powercore dry element air filter. Engine block heater. Vertical

A' post exhaust, foot and hand throttle.









steering column









PRICE PAGES

F.O.B.




CODE ITEM 8310

3803






















on all four wheels, air suspension driver seat and fixed passenger seat, heater,

air conditioning and block heater and full road lights





PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

3803 22,274 10,125 $265,495


130A828 2 1 $0

PTO (E)

130B803 0 0 $0

130B804 159 72 $7,401


130C805 496 225 $7,535

130C806 476 216 $5,835

130D808 15 7 $3,170

130D809 4 rear auxiliary hydraulic spool valves and front linkage - 55gpm 810 368 $10,442

130D810 2 1 $1,105

130D811 15 7 $2,123

130D812 810 368 $9,395

130E801 110 50 $3,866

130E802 Heavy duty drawbar 150 68 $3,866

130E810 0 0 $0

130F801 0 0 $0

AUTOSTEER (E)

130G809 45 20 $4,191





driver seat and fixed passenger seat, heater, air conditioning and block heater and full road

lights


No Front PTO








No drawbar









PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


HYDRAULIC OPTIONS
















CAB OPTIONS














OTHER OPTIONS







JCB FASTRAC

3230 XTRA

TIER 4i

MACHINE PRICE LIST



EFFECTIVE: MAY 1ST, 2013


in U.S. Dollars

Fastrac


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL

ENGINE

TRANSMISSIONmounted joystick and 4 modes of operation. 0-43 mph.

PTO

AXLES

TIRES

STEERING

BRAKES

SUSPENSION

capacity of 551 lbs. (2500Kg).

CAB

REAR HITCH


HYDRAULICS 37 gal/min maximum oil flow @ 3000 psi. 4 rear electronic controlled spool valves. All with 4 position


In addition an optional power beyond circuit offers maximum pump flow on demand with load sensing.






electronic transmission control, ash tray and cigar lighter, auxiliary 12 volt power socket, truck type rear view

Trelleborg 540/65 R34 TM800 front and rear tires.

Full width ROPS cab, air conditioning, heater, dust filter, tinted glass, air suspension seat,




Recirculating ball, power assisted. Tilt and telescope adjustable steering column



15430 LBS / 7000Kg lift capacity category III linkage with electronic control, fender mounted remote

view mirrors, front and rear windscreen wash wipe, tilt and telescope adjustable steering column.


190 PTO Hp, independent rear 540 and 1000 rpm., 1-3/4" 20 spline (optional) and 1-3/8" (6 and


Agricultural tractor with full suspension and 42mph (65Km/h) travel speed.

SISU 7.4 Liter TIER 4i, 220 Max Hp. 1015Nm torque @ 1500 rpm. Dual dry element air filter.

Engine block heater. Vertical 'A' post exhaust, foot and hand throttle.

JCB 4 range, 6 speed powershift with powered range changes. Electronic control with an arm rest

21 spline) PTO shafts. Electro-hydraulic actuation.









PRICE PAGES

F.O.B.




CODE ITEM 3230 XTRA

3687

130A606 USA Operators manual

130B684 Transmission rear PTO only (540/1000 rpm)

130C646 540/65 R34 Trelleborg TM800 Tires 80" track width

130D618 Cat 3 rear linkage with electronic control. 15430lb/7000Kg

130E657 4 Spool auxiliary hydraulics without front linkage

130F630 Heavy duty drawbar frame

130G612 Heavy duty drawbar for use with 130F630

130J607 Front weights for Fastrac without front linkage (1980 lbs.)

130K603 CAT 3 - 2 conversion balls

130L610 12volt accessory power socket


130L638 Worklights. 8 front and 6 rear

130L640 Performance monitor with radar

130M605 1.75" 20 spline PTO adapter

130M618 Smokers pack - ash tray and cigar lighter


130N669 GPS Auto Steer ready package - Trimble compatible system

130N676 Hydraulic trailer brakes




Fastrac 3230-65 XTRA 4wd tractor with 220 Hp SISU 7.4 liter TIER 4i engine,

JCB 6 X 4 Powershift transmission, 37 gal/min hyd. pump, air suspension

drivers and fixed passenger seats c/w seat belts, heater, air conditioning and

electrical block heater





PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

3687 13,581 6173 $188,490

COUNTRY CODE (E)

130A606 USA Operators manual 2 1 $0

GEARBOX (E)

130B684 Transmission rear PTO only (540/1000 rpm) 0 0 $2,830

130B686 Transmission front and rear PTO - single output front PTO 275 125 $8,489

WHEELS (E)

130C631 540/65 R34 Front Tires and 600/70 R30 Rear Tires 1,158 526 $12,664

130C645 540/65 R30 Front Tires and 600/65 R28 Rear Tires 920 418 $6,129

130C646 540/65 R34 Trelleborg TM800 Tires 80" track width 1,632 742 $8,240

130C649 540/65 R30 Nokian TRI-2 Tires 920 418 $11,330

REAR LINKAGE (E)

130D618 Cat 3 rear linkage with electronic control. 15430lb/7000Kg 1,012 460 $10,659

FRONT LINKAGE & AUXILIARY HYDRAULICS

130E657 4 Spool auxiliary hydraulics without front linkage 110 50 $2,154

130E658 4 Spool auxiliary hydraulics with front linkage 7716lb/ 1,320 600 $9,140


130F624 Pick up hitch 330 150 $3,313

130F630 Heavy duty drawbar frame 330 150 $2,282


130G601 Completeing pack - for use with 130F624 0 0 $0

130G612 Heavy duty drawbar for use with 130F630 0 0 $1,030

Fastrac 3230-65 XTRA 4wd tractor with 220 Hp SISU 7.4 liter TIER 4i engine, JCB 6 X 4

Powershift transmission, 37 gal/min hyd. pump, air suspension drivers and fixed passenger seats

c/w seat belts, heater, air conditioning and electrical block heater





PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


HYDRAULIC OPTIONS

130H620 Heavy duty rear suspension cylinders - 7165lb/3250Kg capacity 11 5 $672

130H622 Front free flow return 2 1 $351



130H625 Power beyond Load Sensing Hydraulic Circuit 9 4 $1,363

130H618 Green spool priority flow option 2 1 $1,202

130N676 Hydraulic trailer brakes 7 3 $991


130J607 Front weights for Fastrac without front linkage (1980 lbs.) 1,980 900 $2,388

130J602 Front weights for Fastrac with front linkage (1980 lbs.) 1,980 900 $2,388

130J603 Rear deck weight - 2200lbs - Factory Installed option only 2,200 1,000 $3,167


130K601 Hook end top link 22 10 $137

130K603 CAT 3 - 2 conversion balls 2 1 $66

130K607 Heavy duty lift cylinders 3.6"/90mm (17637lbs lift capacity) 22 10 $531

OTHER OPTIONS

130L640 Performance monitor with radar 4 2 $1,806

130L634 Heated Windshield and Mirrors 6 3 $2,961


130L629 LH forward/reverse lever 2 1 $219

130L638 Worklights. 8 front and 6 rear 20 9 $710

130L610 12volt accessory power socket 2 1 $132

130M605 1.75" 20 spline PTO adapter 2 1 $330



130N669 GPS Auto Steer ready package - Trimble compatible system 15 7 $2,318

Select Optional (O) equipment as desired within limitations if indicated. These items may be added to any PACKAGE BUILD

or CUSTOM BUILD machine if not already included.


JCB FASTRAC

8280

MACHINE PRICE LIST





in U.S. Dollars

Fastrac


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL

CAB

ENGINE

TIRES


PTO

AXLES

REAR HITCH

BRAKES

SUSPENSION


STEERING
















SISU 8.4 Litre, 279 Max Hp. 1195 Nm torque. Powercore dry element air filter. Engine block heater. Vertical 'A'

exhaust, foot and hand throttle.





steering column
















PRICE PAGES

F.O.B.




CODE ITEM 8280

3802






















on all four wheels, air suspension driver's and fixed passenger seats c/w seat

belts, heater, air conditioning and block heater and full road lights





PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

3802 22,274 10,125 $242,794


130A828 2 1 $0

PTO (E)

130B803 0 0 $0

130B804 159 72 $7,401


130C802 0 0 $265

130C804 0 0 $530

130C805 496 225 $7,535

130C806 476 216 $5,835


130D808 15 7 $3,170

130D809 810 368 $10,442

130D810 2 1 $1,105

130D811 15 7 $2,123

130D812 810 368 $9,395


130E801 110 50 $3,866

130E802 150 68 $3,866

130E810 0 0 $0


130F801 0 0 $0

AUTOSTEER (E)

130G809 45 20 $4,191





Heavy duty drawbar

No drawbar



Trelleborg 540/65 R34 front and 650/65R38 rear tires.

Trelleborg 540/65 R34 front and 650/65R38 rear tires. Wide Track.





driver's and fixed passenger seats c/w seat belts, heater, air conditioning and block heater and full

road lights


No Front PTO








PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


HYDRAULIC OPTIONS
















CAB OPTIONS














OTHER OPTIONS







JCB FASTRAC

8310

MACHINE PRICE LIST





in U.S. Dollars

Fastrac


PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

GENERAL

CAB

ENGINE

TIRES


PTO

AXLES

REAR HITCH

BRAKES

SUSPENSION


STEERING



















SISU 8.4 Litre, 306 Max Hp. 1310 Nm torque. Powercore dry element air filter. Engine block heater. Vertical

A' post exhaust, foot and hand throttle.









steering column









PRICE PAGES

F.O.B.




CODE ITEM 8310

3803






















on all four wheels, air suspension driver seat and fixed passenger seat, heater,

air conditioning and block heater and full road lights





PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

3803 22,274 10,125 $265,495


130A828 2 1 $0

PTO (E)

130B803 0 0 $0

130B804 159 72 $7,401


130C805 496 225 $7,535

130C806 476 216 $5,835

130D808 15 7 $3,170

130D809 4 rear auxiliary hydraulic spool valves and front linkage - 55gpm 810 368 $10,442

130D810 2 1 $1,105

130D811 15 7 $2,123

130D812 810 368 $9,395

130E801 110 50 $3,866

130E802 Heavy duty drawbar 150 68 $3,866

130E810 0 0 $0

130F801 0 0 $0

AUTOSTEER (E)

130G809 45 20 $4,191





driver seat and fixed passenger seat, heater, air conditioning and block heater and full road

lights


No Front PTO








No drawbar









PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


HYDRAULIC OPTIONS
















CAB OPTIONS














OTHER OPTIONS







TELETRUK

JCB TELETRUK

TLT35D4 x 4





MACHINE PRICE LIST

in U.S. Dollars

JCB TELETRUK - TLT35D (4 x 4) U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE 74HP, Kohler KD12504TCR Diesel Engine, Tier IV compliant, dry type air cleaner,

Water separator, spin - on fuel filter, thermostart assist, anti-freeze protection to -35 degrees F.

TRANSMISSION Torque Converter Response Hydrostatic drive system

2 speed Hydrostatic transmission, position 1 shovel work, position 2 general duty,

TIRES Options of Industrial or Agricultural tread patterns

ELECTRICAL 12 volt, 60 Ah battery, with 40 amp alternator. Wire harness connectors meet/exceed

IP67 electrical system rating. 2 front 1 rear worklights.

INSTRUMENTS IDC (information display center) Visual warning system for coolant temperature,

engine oil pressure, air cleaner, battery charge, transmission oil pressure and temperature,

fuel gauge and hour meter. Livelink

TELESCOPIC BOOM Two section 14' lift height with hydraulic parallel lift 7700lbs capacity to full height

HYDRAULICS One set of auxillaries, delivering 19gpm

CANOPY Meets SAE J231 FOPS and SEA J1040 ROPS requirements, left side entry. Canopy and cab tilts up for improved


and aft. Cab swing lock pin, metal side screen, single lever control for boom lift/lower and rollback/dump,

tilt control lever forward and reverse hand lever, operator manual, roof mounted strobe, back up alarm

CARRIAGE Standard class lll ITA carriage with option of 1 or 2 extra hydraulic quick disconnect couplings

OPTIONAL CAB Meets SAE J231 FOPS and SEA J1040 ROPS requirements, left side entry.

Glass in front, side, top and rear, optional side door in metal or canvas

WARRANTY 2 year full coverage warranty (please see the machine warranty certificate for details)






DEALER FIT - TELETRUK (PLEASE CONTACT JCB ATTACHMENTS)

All prices and specifications subject to change without notice page 2 of 6 TLT35D 4x4 USD Price Page


PRICE PAGES

F.O.B.




CODE ITEM CANOPY

1176 4 Wheel Drive Tier 4 TELETRUK 35D - 3.5 ton (7000lb Cap) Telescopic Industrial Forklift

250A021 27 x 10 x 12 Traction Front & Rear Foam Filled Traction

250B401 STD Height Canopy Frame Right Hand Side Glass Only

250C021 4 Spool Valve Block - 2 Levers & Button Control in Knob (STANDARD FLOW) 1/4" Hose

250D061 4WD Drive Controls for Tier IV fuel gauge and hour meter. Livelink

250E031 42" Standard Class III Industrial Carriage (3B) Long Drop

250F014 American operator handbook

250G401 Standard Vinyl Seat

250H055 Carriage Angle Indicator, includes Standard Load Guard

250H112 Quick Disconnect Side-Shift (includes load chart 250H120)

250J005 Quick Release Couplings, One Extra Service

250L008 Strobe Warning Light Roof Mounted

250L043 Reverse Alarm




Select one of the following machine PACKAGE BUILDS.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

1176 4 Wheel Drive Tier 4 TELETRUK 35D - 3.5 ton (7000lb Cap) Telescopic Industrial Forklift 9,900 4,500 $58,811

TIRES & WHEELS (E)

250A020 27 x 10 x 12 Front & Rear Pneumatic Crossply Traction 500 227 $4,174

250A021 27 x 10 x 12 Traction Front & Rear Foam Filled Traction 670 305 $5,672


250B401 STD Height Canopy Frame Right Hand Side Glass Only 180 82 $1,803

250B402 STD Height Canopy Frame Right Hand Side Mesh Only 150 68 $2,298

250B403 Low Height Canopy Frame Right Hand Side Glass Only 180 82 $1,803

250B404 Low Height Canopy Frame Right Hand Side Mesh Only 150 68 $2,298

250B405 STD Height Partial Cab 180 82 $3,360

250B406 Low Height Partial Cab 180 82 $3,360

250B407 STD Height Full Cab: Includes Heater/Demister 285 130 $6,167

250B408 Low Height Full Cab: Includes Heater/Demister 285 130 $6,167

250B409 STD Height Canopy: Includes Top Glass 316 144 $3,427

250B410 Low Height Canopy: Includes Top Glass 316 144 $3,427

250B411 STD Height Canopy: Includes Top Glass, Front Screen & Wipers 320 145 $2,709

250B412 Low Height Canopy: Includes Top Glass, Front Screen & Wipers 320 145 $2,709

HYDRAULICS (E)

250C021 40 18 $2,578

250C022 40 18 $3,735

250C023 40 18 $3,326

250C024 40 18 $4,483

250C061 40 18 $2,578

250C062 40 18 $3,735

250C063 40 18 $3,326

250C064 40 18 $4,483

TRANSMISSION (E)

250D061 4WD Drive Controls for Tier IV 0 - $1,072

FORKS (E)

250E000 No Forks Fitted 0 0 $0

250E031 42" Standard Class III Industrial Carriage (3B) Long Drop 38 17 $855


250E033 45" Standard Class III Industrial Carraige (3B) Long Drop 40 18 $884

LANGUAGE PACK (E)

250F014 American operator handbook 0 - $0

SEATS (E)

250G401 Standard Vinyl Seat 10 5 $667

250G402 Standard Fabric Seat 10 5 $710

5 Spool Valve Block - 3 Levers & Button Control in Knob (STANDARD FLOW)

1/4" Hose- CHANGEEZE SYSTEM

4 Spool Valve Block - 2 Levers & Button Control in Knob (EXTRA FLOW) 3/8"

Hose SIDE TRAY- CHANGEEZE SYSTEM


Hose Side & Top Tray- CHANGEEZE SYSTEM


1/4" Hose


1/4" Hose


Hose SIDE TRAY


Hose Side & Top Tray


1/4" Hose- CHANGEEZE SYSTEM







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


FRONT END ANCILIARY

250H014 Single Tilt Carriage Pin 0 0 $334

250H044 Load Guard Low Height 30" 35 16 $338

250H045 Load Guard Standard Height 48" 40 18 $355

250H054 Carriage Angle Indicator, includes Low Load Guard 36 16 $673

250H055 Carriage Angle Indicator, includes Standard Load Guard 41 19 $688

250H200 Wheel Protection Kit: for 4WD Models 0 0 $210 #

250H300 Greasing Kit: Includes a Grease Gun and a 400gm Cartridge of JCB High Pressure Grease 0 0 $26 0

250H444 Heavy Duty Class 3 Carriage for Heavy/Tough Applications 0 0 $528

250H582 Changezee unit: Change from forks to shovel without leaving the cab 0 0 $5,858

250H587 0 0 $10,903

SIDE-SHIFT OPTIONS

250H110 Integral Class III Side-Shift (gives 0 deration) 50 23 $1,909

250H111 Bolt on Side-Shift Class III 55 25 $1,535

250H112 Quick Disconnect Side-Shift (includes load chart 250H120) 55 25 $2,500

250H117 55 25 $5,565

250H120 Load Chart USA Build (no attachments) 0 0 $0

HYDRAULIC COUPLINGS

250J005 Quick Release Couplings, One Extra Service 3 1 $284

250J006 Quick Release Couplings, Two Extra Services 4 2 $562

250J007 Quick Release Couplings Integral/Bolt-on Side-Shift 3 1 $284

250J030 Alternative Lever Pattern: For Cabs with Side Glass $155

250J031 Alternative Lever Pattern: For Cabs with Side Mesh $155


250H005 2KG Dry Powder Fire Extinguisher 15 7 $231

250H030 Vinyl Side Door STD Height Enclosures Only 0 0 $506

250H031 Vinyl Side Door LOW Height Enclosures Only 0 0 $506

250H032 Heater - Only Available on Diesel 0 0 $754

250H034 Roof Grille Protection Kit 22 10 $616

250H036 Panoramic Mirror 0 0 $210

250K011 3.5T 4x4 Plus Valve: Switch in Cab Activates Rear Axle Diff. Lock $1,514

250L410 Face Fan for Tier IV $132

250L088 In Cab Coolant Temperature Gauge $160

Changezee System includes: Hydraulic quick disconnect unit, Changezee forkframe and Changezee shovel

(no forks)

Complete Quick Disconnect System (comes with H112 QD Side-Shift, H046 QD Shovel J005 1 Set QD

Couplings)




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BUCKET OPTIONS

250H046 General Purpose Shovel .65 cu Yard Struck Quick Disconnect (Lightweight applications) 110 50 $2,709

250H050 Bagezee Bucket Quick Disconnect 140 64 $6,144

LIGHTING OPTIONS + EXTRAS

250L006 Rotating Beacon Roof Mounted 2 1 $132

250L047 Rotating Beacon Low Mounted 2 2 $132

250L008 Strobe Warning Light Roof Mounted 2 1 $242

250L043 Reverse Alarm 0 1 $242

250L049 Strobe Warning Light Low Mounted 2 1 $242

250L026 Seat Switch for Vinyl Seat 0 0 $242

250L027 Seat Switch for Fabric Seat 0 0 $242

250L057 Radio Installation For Full or Partial Cab 0 0 $317

250L063 2 Additional Work Lights Front Low Mounted 3 1 $506

250L064 2 Additional Work Lights + Lighting Kit L069 3 1 $1,120

250L065 Road Lights Right Hand Dip For STD Height Cab 4 2 $1,587

250L066 Road Lights Right Hand Dip For LOW Height Cab 4 2 $1,587

250L069 Lighting Kit (Stop, Tail, Indicators & Hazard) 3 1 $616

250K060 CAT2 Catalytic Converter, For Low Level Exhaust: Diesel $1,807

250K061 Speed Reduction Kit: To Reduce Travel Speed by 50% $1,807

250K481 Heavy Duty Body Kit: TLT35D 4x4 Tier IV $1,519

250W004 Wastemaster Kit: Added Protection and Additional Features for Applications in Waste/Recycling $2,003

250W414 Wastemaster + Heavy Duty Body Kit for TLT35D 4x4 $3,462


JCB TELETRUK

TLT35DTCR





MACHINE PRICE LIST

in U.S. Dollars

JCB TELETRUK - TLT35D U.S. DOLLAR

PRICE PAGES

F.O.B.


STANDARD EQUIPMENT

ENGINE 74HP, Kohler KD12504TCR Diesel Engine, Tier IV compliant, dry type air cleaner,

Water separator, spin - on fuel filter, thermostart assist, anti-freeze protection to -35 degrees F.

TRANSMISSION Torque Converter Response Hydrostatic drive system

Single speed Hydrostatic transmission, power flow TCR

TIRES Options of Industrial or Agricultural tread patterns

ELECTRICAL 12 volt, 60 Ah battery, with 40 amp alternator. Waterproof wire harness connectors meet/exceed

IP67 electrical system rating. 2 front, 1 rear worklights

INSTRUMENTS IDC (information display center) Visual warning system for coolant temperature,

engine oil pressure, air cleaner, battery charge, transmission oil pressure and temperature,

fuel gauge and hour meter.

TELESCOPIC BOOM Two section 14' lift height with hydraulic parallel lift 7700lbs capacity to full height

HYDRAULICS One set of auxillaries, delivering 19gpm

CANOPY Meets SAE J231 FOPS and SEA J1040 ROPS requirements, left side entry. Canopy and cab tilts up for improved


and aft. Cab swing lock pin, metal side screen, single lever control for boom lift/lower and rollback/dump,

tilt control lever forward and reverse hand lever, operator manual, roof mounted strobe, back up alarm

CARRIAGE Standard class lll ITA carriage with option of 1 or 2 extra hydraulic quick disconnect couplings

OPTIONAL CAB Meets SAE J231 FOPS and SEA J1040 ROPS requirements, left side entry.

Glass in front, side, top and rear, optional side door in metal or canvas

WARRANTY 2 year full coverage warranty (please see the machine warranty certificate for details)






DEALER FIT - TELETRUK (PLEASE CONTACT JCB ATTACHMENTS)

All prices and specifications subject to change without notice page 2 of 6 TLT35D 2WD USD Price Page


PRICE PAGES

F.O.B.




CODE ITEM CANOPY

1177 TELETRUK 35D - 3.5 ton (7000lb Cap) Telescopic Industrial Forklift

250A015 27 x 10 x 12 Front, 23 x 9 x 10 Rear (P.P.S.) Semi Solids

250B401 STD Height Canopy Frame Right Hand Side Glass Only

250C021 4 Spool Valve Block - 2 Levers & Button Control in Knob (STANDARD FLOW) 1/4" Hose

250D051 2WD DRIVE CONTOLRS FOR TIER IV

250E046 42" Standard Class III Industrial Carriage (3B) Long Drop

250F014 American operator handbook

250G401 COMPACT VINYL SEAT

250H055 Carriage Angle Indicator, includes Standard Load Guard

250H072 Quick Disconnect Side-Shift (includes load chart 250H078)

250J005 Quick Release Couplings, One Extra Service

250L008 Strobe Warning Light Roof Mounted

250L032 Reverse Alarm




Select one of the following machine PACKAGE BUILDS.



PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BASE MACHINE (E)

1177 TELETRUK 35D - 3.5 ton (7000lb Cap) Telescopic Industrial Forklift 10,150 4,614 $50,606

TIRES & WHEELS (E)

250A015 27 x 10 x 12 Front, 23 x 9 x 10 Rear (P.P.S.) Semi Solids 500 227 $3,178

250A016 27 x 10 x 12 Traction Front, 23 x 9 x 10 Industrial Rear 425 193 $3,178

250A017 27 x 10 x 12 Traction Front, 23 x 9 x 10 Industrial Rear - Foam Filled 800 364 $4,092

250A041 27 x 10 x 12 Front, 23 x 9 x 10 Rear Michelin XZM Pneumatic Radials $5,514


250B401 STD Height Canopy Frame Right Hand Side Glass Only 180 82 $1,803

250B402 STD Height Canopy Frame Right Hand Side Mesh Only 150 68 $2,298

250B403 Low Height Canopy Frame Right Hand Side Glass Only 180 82 $1,803

250B404 Low Height Canopy Frame Right Hand Side Mesh Only 150 68 $2,298

250B405 STD Height Partial Cab 180 82 $3,360

250B406 Low Height Partial Cab 180 82 $3,360

250B407 STD Height Full Cab: Includes Heater/Demister 285 130 $6,167

250B408 Low Height Full Cab: Includes Heater/Demister 285 130 $6,167

250B409 STD Height Canopy: Includes Top Glass 316 144 $3,427

250B410 Low Height Canopy: Includes Top Glass 316 144 $3,427

250B411 STD Height Canopy: Includes Top Glass, Front Screen & Wipers 320 145 $2,709

250B412 Low Height Canopy: Includes Top Glass, Front Screen & Wipers 320 145 $2,709

HYDRAULICS (E)

250C021 4 Spool Valve Block - 2 Levers & Button Control in Knob (STANDARD FLOW) 1/4" Hose 40 18 $2,578

250C022 40 18 $3,735

250C023 40 18 $3,326

250C024 40 18 $4,483

250C061 40 18 $2,578

250C062 40 18 $3,735

250C063 40 18 $3,326

250C064 40 18 $4,483

TRANSMISSION (E)

250D051 Forward & Reverse Lever (TCR) 0 - $1,051

FORKS (E)

250E050 No Forks Fitted 0 0 $0

250E040 42" Standard Class III Industrial Carriage (3A) 38 17 $727

250E041 48" Standard Class III Industrial Carriage (3A) 44 20 $785

250E043 45" Standard Class III Industrial Carraige (3A) 40 18 $773



250E049 45" Standard Class III Industrial Carraige (3B) Long Drop 40 18 $867

LANGUAGE PACK (E)

250F014 American operator handbook 0 - $0

SEATS (E)

250G401 Standard Vinyl Seat 10 5 $667

250G402 Standard Fabric Seat 10 5 $710

4 Spool Valve Block - 2 Levers & Button Control in Knob (STANDARD FLOW) 1/4" Hose-

CHANGEEZE SYSTEM

5 Spool Valve Block - 3 Levers & Button Control in Knob (STANDARD FLOW) 1/4" Hose-

CHANGEEZE SYSTEM

4 Spool Valve Block - 2 Levers & Button Control in Knob (EXTRA FLOW) 3/8" Hose SIDE TRAY-

CHANGEEZE SYSTEM

5 Spool Valve Block - 3 Levers & Button Control in Knob (EXTRA FLOW) 3/8" Hose Side & Top Tray-

CHANGEEZE SYSTEM

5 Spool Valve Block - 3 Levers & Button Control in Knob (STANDARD FLOW) 1/4" Hose

4 Spool Valve Block - 2 Levers & Button Control in Knob (EXTRA FLOW) 3/8" Hose SIDE TRAY

5 Spool Valve Block - 3 Levers & Button Control in Knob (EXTRA FLOW) 3/8" Hose Side & Top Tray







PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


FRONT END ANCILIARY

250H005 2KG Dry Powder Fire Extinguisher 15 0 $231

250H008 Boom Stop for Any Quick Disconnect Attachment (included in all 3B forks) 15 7 $231

250H014 Single Tilt Carriage Pin 0 0 $334

250H043 Front Facing Front Wheel Mud Flaps 0 0 $116

250H044 Load Guard Low Height 30" 35 16 $338

250H045 Load Guard Standard Height 48" 40 18 $355

250H054 Carriage Angle Indicator, includes Low Load Guard 36 16 $673

250H055 Carriage Angle Indicator, includes Standard Load Guard 41 19 $688

250H201 Wheel Protection Kit for 2WD Models 0 0 $210

250H300 Greasing Kit: Includes a Grease Gun and a 400gm Cartridge of JCB High Pressure Grease 0 0 $26

250H444 Heavy Duty Class 3 Carriage for Heavy/Tough Applications 0 0 $528

250H582 Changezee unit: Change from forks to shovel without leaving the cab 0 0 $5,858

250H587 0 0 $10,903

SIDE-SHIFT OPTIONS

250H070 Integral Class III Side-Shift (gives 0 deration) 50 23 $1,871

250H071 Bolt on Side-Shift Class III 55 25 $1,517

250H072 Quick Disconnect Side-Shift (includes load chart 250H078) 55 25 $2,450

250H077 55 25 $5,553

250H078 Load Chart USA Build (no attachments) 0 0 $0

HYDRAULIC COUPLINGS

250J005 Quick Release Couplings, One Extra Service 3 1 $284

250J006 Quick Release Couplings, Two Extra Services 4 2 $562

250J007 Quick Release Couplings Integral/Bolt-on Side-Shift 3 1 $284

250J030 Alternative Lever Pattern: For Cabs with Side Glass 0 0 $155

250J031 Alternative Lever Pattern: For Cabs with Side Mesh 0 0 $155


250H030 Vinyl Side Door STD Height Enclosures Only 0 0 $506

250H031 Vinyl Side Door LOW Height Enclosures Only 0 0 $506

250H032 Heater - Only Available on Diesel 0 0 $754

250H034 Roof Grille Protection Kit 22 10 $616

250H036 Panoramic Mirror 0 0 $210

DRIVE OPTIONS & PROTECTION

250K048 CAT2 Catalytic Converter, For Low Level Exhaust: Diesel 0 0 $1,807

250K050 Hydraulic Flow Divider (Twin Wheel Drive) 6 3 $2,146

250K059 Trash Guard (For Waste Applications & Difficult Ground Conditions) 25 11 $838

250K060 Speed Reduction Kit: To Reduce Travel Speed by 50% 0 0 $1,807

250K061 No Creep Software: Gives Machine Characteristic of a Hydrostatic. Boom Hydraulics unchanged. 0 0 $985

250K480 Heavy Duty Body Kit: TLT35D 2WD Tier IV 0 0 $1,519

Changezee System includes: Hydraulic quick disconnect unit, Changezee forkframe and Changezee shovel

(no forks)

Complete Quick Disconnect Sys (comes with H072 QD Side-Shift, H046 QD Shovel J005 1 Set QD

Couplings)




PRICE PAGES

F.O.B.



SALES WEIGHT U.S.


BUCKET OPTIONS

250H046 General Purpose Shovel .65 cu Yard Struck Quick Disconnect (Lightweight applications) 110 50 $2,709

250H050 Bagezee Bucket Quick Disconnect 140 64 $6,144

LIGHTING OPTIONS + EXTRAS

250L006 Rotating Beacon Roof Mounted 2 1 $132

250L008 Strobe Warning Light Roof Mounted 2 1 $242

250L026 Seat Switch for Vinyl Seat 0 0 $242

250L027 Seat Switch for Fabric Seat 0 0 $242

250L030 Parts Book 0 0 $94

250L032 Reverse Alarm 0 0 $169

250L041 Reverse Alarm (WHITE NOISE) 0 0 $242

250L047 Rotating Beacon Low Mounted 2 2 $132

250L049 Strobe Warning Light Low Mounted 2 1 $242

250L057 Radio Installation For Full or Partial Cab 0 0 $317

250L063 2 Additional Work Lights Front Low Mounted 3 1 $506

250L064 2 Additional Work Lights + Lighting Kit L069 3 1 $1,120

250L065 Road Lights Right Hand Dip For STD Height Cab 4 2 $1,587

250L066 Road Lights Right Hand Dip For LOW Height Cab 4 2 $1,587

250L069 Lighting Kit (Stop, Tail, Indicators & Hazard) 3 1 $616

250L088 In Cab Coolant Temperature Gauge 0 0 $160

250L410 Face Fan for Tier IV 0 0 $132

250W002 Wastemaster Kit for 2WD Models 0 0 $2,649

250W412 Wastemaster + Heavy Duty Body Kit & Heavy Duty Carriage for 35D 2WD 0 0 $3,172


WORKMAX

JCB WORKMAX 800


MACHINE PRICE LIST

In U.S. Dollars

Prices and Specifications Subject To Change Without Notice

Prices Listed Are MSRP

Effective July 1, 2013

JCB Workmax 800D General Purpose BENCH SEAT – Standard Equipment

Roll Over Protective Structure (ROPS)* Basic Lights to include head lights Roof Retractable Seat Belt 4 Wheel Hydraulic Disc Brakes Manual Tipping Bed 2 Speed CVT Transmission Fenders 2 inch Tow Hitch Receiver Digital Instrumentation: Speedometer, Hourmeter, Tachometer, Odometer, Fuel Gauge, No Charge Warning Light, 4wd indicator Audible/Visible Alarms for Low Engine Oil Pressure and High Water Temperature High Beam Indicator, Turn Signal Indicator, Glow Plug Indicator Electronically Selectable 4 Wheel Drive Electronically Selectable Rear Differential Lock Independent Rear Suspension Bench Seat Warranty: 12 Months or 500 Hours

JCB Workmax 800D General Purpose BUCKET SEAT – Standard Equipment Roll Over Protective Structure (ROPS)* Basic Lights to include head lights Roof Retractable Seat Belt 4 Wheel Hydraulic Disc Brakes Manual Tipping Bed 2 Speed CVT Transmission Fenders 2 inch Tow Hitch Receiver Digital Instrumentation: Speedometer, Hourmeter, Tachometer, Odometer, Fuel Gauge, No Charge Warning Light, 4wd indicator Audible/Visible Alarms for Low Engine Oil Pressure and High Water Temperature High Beam Indicator, Turn Signal Indicator, Glow Plug Indicator Electronically Selectable 4 Wheel Drive Electronically Selectable Rear Differential Lock Independent Rear Suspension Bucket Seat – Adjustable Drivers Seat Warranty: 12 Months or 500 Hours

*Roll Over Protective Structure (ROPS) – Meets Requirements of 2003/37/EC & 2009/75/EC

Prices and Specifications subject to change without notice North American Suggested List prices Listed in U.S Dollars Effective July 1, 2013 Prices Listed Are Ex-Works Savannah

JCB Workmax 800D General Purpose Unit

JDS CODE Machine MSRP 2777 Workmax 800D - GP Yellow Bench Seat $12,399.00

2778 Workmax 800D - GP Camo Bench Seat $12,593.00

2779 Workmax 800D - GP Blue Bench Seat $12,399.00

2783 Workmax 800D – Green Bench Seat $12,399.00

2785 Workmax 800D – GP Yellow Bucket Seat $12,528.00

2786 Workmax 800D – GP Camo Bucket Seat $12,720.00

2787 Workmax 800D – GP Blue Bucket Seat $12,528.00

2788 Workmax 800D – GP Green Bucket Seat $12,528.00

Prices and Specifications subject to change without notice North American Suggested List prices Listed in U.S Dollars Effective July 1, 2013 Prices Listed Are Ex-Works Savannah

DEALER INSTALLED ACCESSORIES

Part Number Part Description 980/A7361 Glass Front Screen with Wiper and Washer

980/A7362 Rear Screen

980/A7363 Hard Door Kit (Glass)

980/A7364 Brush Guard Kit

980/A7365 Hydraulic Lift Kit

980/A7367 Heater

980/A7368 Green Bodywork (Replacement)

980/A7369 Soft Door Kit

980/A7370 Beacon Kit

980/A7372 Rear Mesh Screen

980/A7374 Front Tow Hitch

980/A7375 Versa Acrylic Front Screen

980/A7376 Load Bed Liner

980/A7377 Bench Seat Kit

980/A7378 Interior Mirror

980/A7379 Road Light Kit *

980/A7380 Lower Door Kit

980/A7381 Camo Bodywork (Replacement)

980/A7382 Yellow Bodywork (Replacement)

980/A7383 Off Road Tires Black

980/A7384 Off Road Tires Silver

980/A7385 Blue Bodywork (Replacement)

*Items necessary for a hard cab kit: Hard Door Kit (980/A7363), Rear Screen (980/A7362) and either Glass Front Screen (980/A7361) or Versa

Acrylic Front Screen (980/A7375) and optional heater (980/A7367)

*Road Light Kit includes turn signals and brake lights

For current attachment pricing please log on to JDS

Date post:	21-May-2018
Category:	Documents
Upload:	lamdiep
View:	215 times
Download:	2 times

JCB Inc. - Pricelist December 2013 STS # 800126 Inc. - Pricelist December 2013 STS # 800126 Please...

Documents