Home > Documents > LED - Zumtobel the right place for LED multicoloured luminaires – whether LEDOS RGB, PHAOS...

LED - Zumtobel the right place for LED multicoloured luminaires – whether LEDOS RGB, PHAOS...

Date post: 18-Jun-2018
Category:
Author: duongtuong
View: 213 times
Download: 0 times
Share this document with a friend
Embed Size (px)
of 47 /47
Transcript
  • www.zumtobelstaff.com/phaos

    LEDMulticoloured luminaires

  • LEDMulticoloured luminaires

  • Reception area at the headquarters of an

    international company. This is where visitors

    get their first impression of a companys

    philosophy, brand content and image:

    just the right place for LED multicoloured

    luminaires whether LEDOS RGB, PHAOS

    lighting tiles, lighting tubes or XENO LED

    spotlights. Thanks to the latest LED tech-

    nology and sophisticated electronic control

    systems, PHAOS can be used to design

    fascinating plays of light colour in a creative

    manner: for illuminated walls in dynamic

    colours, impressive lighting accents, or to

    set room scenes which are full of atmosphere.

    LED multicoloured luminaires can make

    a room uniquely easily-remembered and

    unmistakably different.

  • 3M U L T I C O L O U R E D L U M I N A I R E S F O Y E R

  • Competence focused on LEDsA new technology for dynamic light

    Up-to-date technology and manufacturing

    As a leading luminaire manufacturer, Zumtobel Staff

    is investing heavily in the potential of innovative LED

    technology. As well as carrying out intensive research

    and development work, it has established a separate

    ultra-modern high-performance production division for

    manufacturing LED systems. Enthusiastic, highly pro-

    fessional experts at workstations which are protected

    against electrostatic discharge (ESD) use state-of-the-

    art laboratory equipment to ensure the very highest

    quality level.

    Varied product range

    As a result of this commitment, users can now benefit

    from a perfected LED product line which is capable of

    creating an extremely diverse range of lighting effects:

    from static lighting points through to dynamically

    changing colour scenes. The full potential of this tech-

    nology still remains largely untapped. This explains why

    Zumtobel Staff is determined to stay on the ball and to

    turn the latest developments in LED technology into

    innovative products which are opening up new horizons

    for lighting design.

    Fast delivery, flexibly preassembled units

    Zumtobel Staff gives high priority to LED systems

    even as far as logistics are concerned. Deliveries are

    correspondingly fast, and consignments are complete.

    In addition, the well-thought-out modular design of

    the LED luminaire components enables of delivery

    customised, project-specific lighting solutions at short

    notice.

    E S D S E C T I O N

    M A N U F A C T U R I N G

    T E S T I N G

  • Colour and dynamism

    The functional strengths of LEDs include compactness, long service life, minimal maintenance, low energy consumption,

    electronic controllability, low surface temperature, positional flexibility and variable angles of radiation. Zumtobel Staff

    LED multicoloured luminaires add dynamic interplay of colours to these features.

    RGB technology is the magic concept which makes these colour shows possible. RGB stands for the electronically

    controlled interplay of red, green and blue LEDs which

    is theoretically capable of generating 16.7 million

    colour hues. This can be achieved not just statically

    but also in an extremely wide range of dynamic sequences: suddenly like a moving wave of light, perceptibly changing

    like a chameleon or almost imperceptibly changing, like changes in daylight. Intervals between changes can vary from

    3 seconds to 3 hours. Different LED designs are used in the luminaires depending on the lighting system: wired radial

    LEDs, SMD LEDs or LEDs which use chip-on-board technology.

    5M U LT I C O L O U R E D L U M I N A I R E S LED multicoloured luminairesFascinating interplay of colours

    Controlled colour sequences

    Zumtobel Staffs diverse multicoloured luminaire

    product lines offer three levels of dynamic interplay

    between light and colour:

    LEDOS RGB

    A preset programmed chip-controlled light-colour

    sequence within 15 seconds.

    PHAOS ANALOG

    Lighting modules controlled via an analog BUS for a

    coordinated light-colour show from various PHAOS

    ANALOG systems.

    PHAOS DIGITAL

    The sophisticated solution controlled over a digital

    lighting management BUS, with plenty of scope for

    designing complex, dynamic light-colour scenarios

    using several PHAOS DIGITAL systems. The sequence

    is programmed by using a lighting management input

    unit, a touch-panel screen or a PC.

    Note: Because of technical control incompatibilities,

    products in the LEDOS RGB, PHAOS ANALOG and

    PHAOS DIGITAL ranges cannot be used in combination

    with each other. LEDOS RGB synchronised by identical phase relation

    Farb

    e

    tf (50 Hz)

    Col

    our

  • The coloured light shows which can be produced using LED

    multicoloured luminaires are truly eye-catching. It is not by chance

    that their traditional applications include presentation and retail,

    shops, showrooms and shop windows. Wherever there is a need

    to attract the publics attention, these luminaires are in their

    element. Their effect is best exploited in restrained conventional

    ambient lighting.

    LED light showsThe magic of staging attractive settings

  • 7L E D M U LT I C O L O U R E D L U M I N A I R E S

    The real strengths of LED multicoloured luminaires come into play

    in many application areas: as decorative architectural features, as

    lighting accents and creating a sense of direction in museums and

    art galleries, to set the mood in hotels, restaurants and bars, to

    provide spiritual invigoration in health and therapy treatment areas,

    or as a magnet to draw public attention to trade fair stands. This

    comprehensive system portfolio offers a vast amount of creative

    scope ranging from individual accent lighting through to large-scale

    concepts.

    The idea

    The aim is to make a specific motor cycle model the centre of

    attention in a dealers showroom.

    The concept

    Three XENO LED spotlights from the PHAOS ANALOG range are

    spaced 1.20 m apart and directed towards the motor cycle. Each

    luminaire produces light-colour sequences and sets the scene in

    its own sector independently of the other two luminaires.

    The effect

    The dynamic colour changes in the way the three sectors are lit

    alternately emphasise individual details of the motor cycle, and

    the different material properties of its different components ensure

    additional effects.

    This catches the observers attention; colour and dynamism set

    the stage for an exciting visual experience.

  • Even LEDOS RGB compact recessed lumi-

    naires provide plenty of dynamism. They

    contain a chip which delivers a fixed pro-

    grammable colour sequence to run the de-

    sired range of colours within 15 seconds with

    gradual transitions between colours. These

    luminaires are available in a square or a

    round design, and are suitable for providing

    accent lighting as well as guidance. Electrical

    installation is straightforward and fast the

    luminaire is directly connected to the mains

    supply. All luminaires connected to a par-

    ticular line are clocked and synchronised via

    the power-line frequency; the programmed

    sequence is preset.

    LEDOS RGB is suitable for a wide range

    of uses. Its high degree of protection

    (IP 67), high load-bearing capacity of up to

    1,000 kg and suitability for installation in

    concrete, brickwork or cavity walls means

    that LEDOS RGB can be used outdoors as

    well as indoors. Whether used as a single

    luminaire or as a synchronised group of

    luminaires LEDOS RGB provides impressive

    lighting and is therefore at home wherever

    light is used to set the stage for rooms or

    interior decor: in shops, hotels, restaurants,

    bars, cinemas, theatres, etc.

    Please also refer to pages 36 and 37 for product details, installation, mounting tips and

    specification text.

    LEDOS RGBBreak into the dynamic world of colour

  • 9L E D O S R G B L I G H T A N D D Y N A M I S M

  • Guide

    Along access routes, in

    prestigious circulation areas or

    corridors, dynamic light-colour

    shows produced by LEDOS

    RGB lead people along the right

    path and create a secure sense

    of direction in areas which are

    dark. This is all possible without

    high energy consumption, with

    little maintenance effort, and

    provides plenty of scope for

    attractively designed floors and

    walls.

    Embellish

    With its lively colour changes,

    LEDOS RGB brings vitality and

    character to any room. Lighting

    points become eye-catching

    interior design features. Not just

    in hotel suite bathrooms but

    wherever there is a need to

    create a sense of well being,

    invite guests to linger or attract

    attention.

    Guiding, embellishing, accentuating with LEDOS RGB

  • 11L E D O S R G B L I G H T I N G A C C E N T S

    Accentuate

    LEDOS RGB uses constantly

    changing lighting accents to

    turn even boring floor surfaces

    into the focus of visual attention.

    Benefits: more attractive look

    and improved safety.

  • PHAOS ANALOGSpectacular lighting programs for any situation

    See refer to pages 3235 for PHAOS DIGITAL lighting.

    1417

    2225

    2629

    3031P H A O S C O N T R O L U N I T A N A L O G

    P H A O S L I N E L E D A N A L O G

    P H A O S L I G H T I N G T U B E L E D A N A L O G

    P H A O S L I G H T I N G T I L E L E D A N A L O G

    Programming

    Combinations

    Bus networking

    PHAOS ANALOG is a product range that comprises various luminaire models which have

    one common feature: they are controlled over an analog BUS.

    The range includes components for wide-areas as well as pinpoint coloured light which can

    be used as stand-alone devices or in association with other systems from the same product

    range in a coordinated way.

    1821P H A O S X E N O L E D A N A L O G

  • 13P H A O S A N A L O G L I G H T I N G P R O G R A M S

    Hymer all-in-one-car research project

    Concept study for a futuristic motorhome

    Innovative lighting featuring Zumtobel Staff

    LED multicoloured luminaires, among other

    fittings

    PHAOS lighting tiles create a leisure-

    oriented atmosphere

    Extremely wide range of lighting scenes

    from sunset to blue sky can be conjured

    up at the users whim or chosen to match

    a particular season, destination or weather

    Low surface temperature and compact

    mounting dimensions for maximum crea-

    tive scope

  • Depending on requirements, the PHAOS

    lighting tile LED ANALOG can, as a presen-

    tation surface or illuminated wall with dy-

    namically changing colours, set the stage

    for itself or for a specific object. Its brightly

    and evenly lit square surface spreads light;

    the colours of the light can be changed over

    the entire surface or be accentuated at the

    press of a button. There are practically no

    limits on the choice of colours, and the pace

    and transition speed of colour changes are

    always variable.

    Technical details

    PHAOS lighting tiles LED ANALOG

    measure 228 x 228 mm and can be used

    as stand-alone units or, alternatively,

    can be driven and programmed using an

    analog BUS

    They can be installed in a variety of

    positions. A special mounting frame is

    available for wall mounting

    The titanium coloured die-cast aluminium

    housing ensures optimum heat dissipation

    for safety and a long service life

    Rugged sandwich construction with rear

    and front reflector sheets and high-grade

    acrylic diffuser panel

    When fitted with optional special power

    supply unit, the luminaire meets protection

    class III specifications (SELV)

    Please also refer to pages 36 and 37 for

    further product details, installation and

    mounting tips and specification text.

    PHAOS lighting tileLED ANALOGA wealth of colours in one square

  • 15P H A O S A N A L O G L I G H T I N G T I L E

  • Plenty of creative scopeLight as the link between stressand stress relief

    The lighting tile is versatile, has a wide

    range of possible applications and opens

    up vast scope for creative design. The

    PHAOS lighting tile LED ANALOG, like the

    digital version, is mounted on beams, walls

    or other surfaces or simply placed in a room

    on its own or with several others in a

    group formation. Depending on the colour

    program, it provides light which has a calm-

    ing or stimulating effect. It can also be used

    as an eye-catching feature in shops and

    restaurant and catering areas.

    Its design and technical options always

    seem to inspire creative use. Individually

    devised arrangements and colour shows

    produce exhibits which, in counter and

    reception halls, exude spectacular flair.

    The user interface ensures programs are

    easy to handle in any application.

    Just like their digital counterparts, PHAOS

    lighting tiles LED ANALOG are highly effec-

    tive tools for setting the stage for objects in

    a pleasing manner. In both sales spaces

    and museums, glass objects produce an

    impressive succession of colours and cap-

    ture the spellbound observers attention.

    Lighting tiles can act as a presentation

    platform or serve as decorative items in

    their own right. The option to determine

    the best colour mix and appropriate pace

    for a sequence as required ensures a high

    level of flexibility.

  • 17P H A O S A N A L O G W E L L N E S S

    Just like the digital model, PHAOS lighting tiles LED ANALOG encourage interesting

    design in areas such as wellness centres and medical treatment rooms. The effect of the

    light they produce can be defined so that the lighting scene obtained encourages stress

    relief and relaxation. They can be used to produce a simple, changing image which distracts

    and calms patients in a waiting room, they can be an integral part of colour therapy, or an

    interior design feature in a fitness gym they have a large number of possible uses.

  • 19P H A O S A N A L O G X E N O L E D

    The X-joint lends the

    spotlight its distinctive,

    unmistakeable character.

    The PHAOS XENO LED ANALOG spotlight

    is easily programmed at the rear of the

    unit or can be programmed via a separate

    control unit (art. no. 60 810 440).

    Technical details

    This striking design in titanium grey and black is the

    work of internationally famous French designer Jean-

    Michel Wilmotte

    Rugged design using aluminium and die-cast metal

    as well as a durable controller made of high impact

    resistant polycarbonate

    Luminaires can be rotated through 365 and pivoted

    through 90; this enables them to be positioned as

    flexibly as possible

    The built-in SELV safety transformer ensures safe

    operation

    Light-colour sequences can be programmed on the

    actual luminaire when used as a stand-alone unit or

    can be programmed via an analog BUS

    Wall- and ceiling-mounting are made easy by a

    wall-mounting bracket

    The possibility of dynamically spotlighting millions of colour shades with pre-programmed sequences and dissolve speeds makes

    the XENO LED spotlight (created by designer Jean-Michel Wilmotte) the specialist in setting dramatic lighting stages. If the

    stage setting changes, often a single key press is enough to change the colour sequence. The light produced has no IR or UV

    components and exhibits can therefore be lit in a manner which meets the need for careful conservation.

    PHAOS XENO LEDANALOG Putting the spotlighton colour changes

    Please also refer to page 38 for further product details,

    installation and mounting tips and specification text.

  • The XENO LED spotlights capabilities mean that it is inevitably

    used for highly effective presentations in shops, museums, art

    galleries and exhibition areas. It also creates exciting, richly

    varied lighting scenes in foyers, bars, restaurants and many other

    prestigious areas where it achieves maximum effect when used

    in restrained ambient lighting.

    XENO LEDThe specialist in setting dramatic lighting scenes

  • 21P H A O S A N A L O G P R E S E N T A T I O N

    Showing off products and brands in shops, and exhibits in art

    galleries and museums highly effectively with dynamic light in

    variable colours like its digital brother, PHAOS XENO LED

    ANALOG showcases objects in the right light in an innovative,

    non-damaging manner.

  • PHAOS lighting tube LED ANALOGVaried colours all the way along the line

    Guiding, accompanying or creating a background the PHAOS

    lighting tube LED ANALOG is designed for indirect light distribution

    and can handle many tasks and accomplish them creatively

    thanks to a selectively variable, wide variety of colours. Sometimes

    concealed in coves, sometimes deliberately installed in a prominent

    position, the emphasis is always clearly on the lighting tubes effect.

    Colours bring a room to life, regardless whether they change

    randomly or colour changes are coordinated along the line of

    lighting tubes. Shops, bars, restaurants and wellness areas are

    transformed into visually rich landscapes. The lighting tube can

    be rotated through 355 to ensure maximum flexibility in terms of

    distribution position. Continuous lines of light over virtually un-

    limited distances can be implemented straightforwardly without

    significant installation effort.

    Spectacular effects can be achieved by deploying linear waves

    of colours controlled by lighting management systems.

    The PHAOS ANALOG control unit is needed

    in order to program the PHAOS lighting tube

    LED ANALOG and PHAOS LINE, and is also

    the perfect device for conveniently controlling

    the PHAOS lighting tile LED ANALOG and

    PHAOS XENO LED ANALOG.

  • 23

    Technical details

    The PHAOS lighting tube LED ANALOG has a diameter of

    40 mm and is available in lengths of 310 and 900 mm fitted

    with 100 or 300 LEDs depending on design size

    Lighting tube can be rotated through 355

    Housing made of titanium grey aluminium extrusion with

    plastic end pieces, robust construction

    Controller made of high impact resistant transparent

    polycarbonate to protect against impact

    Two possible installation methods: surface-mounted or

    wall-mounted with flush socket and through-wiring in the wall;

    both methods enable horizontal as well as vertical installation

    Lighting tube with 24 V DC supply and a separate 25 W power

    supply unit meets protection class III specifications (SELV)

    Controlled/programmed via separate control unit

    (art. no. 60 810 440)

    Please also refer to pages 38 and 39 for further product details,

    installation and mounting tips and order wording as well as to

    page 43 for installation and mounting tips.

    P H A O S A N A L O G L I G H T I N G T U B E

    Pure fascination: dynamic indirect lighting using the PHAOSlighting tube

    Schematic view of illustrated light window16 x lighting tube 60 810 427

    1200

    1200

    1100

    1100

  • catering areas, and in theatres

    or cinemas.

    Besides the creative freedom

    they give to users when

    programming colour changes,

    the most striking differences

    between these lighting tubes

    and conventional tubular

    lighting systems are their low

    surface temperature and long

    service life.

    Like the digital version, PHAOS

    lighting tubes LED ANALOG

    can be used individually or as

    a flexibly arranged continuous

    row of light whose length can

    be varied in 30 cm increments.

    Framing, cove lighting or linear

    backlighting achieve interesting

    effects in shops, edging round

    mirrors in beauty salons or hair-

    dressers, hotels, restaurant and

    PHAOS ANALOGThe latest-generation lighting tube

  • 25P H A O S A N A L O G C R E A T I N G E F F E C T S

  • The dynamically coloured LED

    strips of light of PHAOS LINE

    LED ANALOG surface-mounted

    and recessed luminaires bring

    floors and walls to life. Impres-

    sive effects and public attention

    are guaranteed in shops, shop-

    ping malls, hotels, cinemas,

    museums and restaurants.

    Two different lengths are availa-

    ble to build continuous rows of

    almost unlimited length which

    can be configured as required.

    Colour changes are possible

    with an extremely wide variety of

    compositions and sequences

    even waves of coloured light

    running along the entire length

    of the row a wealth of possibi-

    lities is waiting to be exploited.

    Because of the materials used,

    PHAOS LINE is a high-quality,

    durable product: V4A special

    steel, die-cast or extruded alu-

    minium sections, and frosted

    safety glass.

    PHAOS LINE LED ANALOG surface-mounted luminaire

    PHAOS LINE LED ANALOG recessedluminaire

    PHAOS LINE LED ANALOGDynamically coloured strips of light

    PHAOS LINE LED ANALOG will be available in November 2002.

  • 27P H A O S A N A L O G L I N E L E D

    Because it can be flexibly sur-

    face-mounted, PHAOS LINE can

    be used to illuminate facades in

    an uplight or downlight position.

    It is equally suitable for use as

    a continuous row system in out-

    door areas or in damp locations.

    The adjustable wall support

    enables unevenness to be com-

    pensated.

    It can also be used to alter the

    distribution of light. A straight-

    line design and compact size

    also ensure that it blends unob-

    trusively into the overall archi-

    tectural scheme.

  • PHAOS LINE LED ANALOG recessed luminaires

    Ideal application areas for PHAOS LINE recessed luminaires

    include prestigious circulation areas where they do an impressive

    job of directing and guiding when embedded in the floor. By

    producing uniformly illuminated surfaces, they make an equally

    strong impression as decorative effective lighting in counters,

    furniture or shop interiors. When used to light staircase steps,

    they even make a valuable contribution towards safety.

    Technical details

    PHAOS LINE LED ANALOG recessed luminaires are available

    in lengths of 380 and 1,000 mm. They can be combined into

    continuous rows of practically infinite length without any

    significant installation effort.

    Rugged housing made of extruded aluminium section, end

    pieces are made of die-cast aluminium, the entire luminaire is

    powder-coated in titanium grey. Equally rugged: frosted 10 mm

    safety glass. The design is completed by a cover frame made

    of V4A special steel.

    The number of LEDs in the luminaire depends on its length:

    380 mm size has 100 LEDs, 1,000 mm size has 300 LEDs.

    A special casting box enables installation in cavity walls

    (minimum recessed depth 85 mm) and in concrete/brickwork.

    Two PG 13.5 cable glands for through-wiring.

    Luminaires meet the following specifications: IP 67, protection

    class II, load-bearing capacity up to 500 kg.

    Controlled via a separate analog control unit

    (art. no. 60 810 440).

    PHAOS LINE LED ANALOGRecessed and surface-mounted luminaires

    PHAOS LINE LED ANALOG surface-mounted luminai-

    res

    Large faades and walls of the kind encountered in airports, trade

    fair and sales halls, sports stadiums and department stores can be

    given an individual touch by colour shows provided by PHAOS

    LINE surface-mounted luminaires. They are equally at home in

    situations where coves and roof structures of architecturally sophi-

    sticated buildings need to be emphasised. Their ability to with-

    stand moisture makes this continuous row system a safe and

    almost maintenance-free solution. Their optic designed for indirect

    lighting ensures that the desired surfaces are brightly illuminated.

    Technical details

    PHAOS LINE modules are available in lengths of 360 and

    980 mm. They can be installed either horizontally or vertically in

    order to build continuous row systems without any significant

    installation effort.

    The luminaire is extremely compact (dimensions: 80 x 80 mm).

    Robust design consisting of extruded aluminium section with end

    pieces made of die-cast aluminium, powder-coated in titanium

    grey, and high impact resistant controller made of polycarbonate.

    The number of LEDs depends on the length of the luminaire:

    360 mm size has 100 LEDs, 980 mm size has 300 LEDs.

    An adjustable ( 20) graduated mounting base ensures easy

    installation.

    PHAOS LINE LED ANALOG meets specifications of the following

    standards: IP 65 and protection class II, and is also impact

    resistant (6 joules).

    Controlled via a separate control unit (art. no. 60 810 440).

    Please also refer to page 39 for further product details and order

    wording.

    PHAOS LINE products are also available for use with a T5

    compact fluorescent lamp 8 W (compact version), 21 and 39 W.

  • 29P H A O S A N A L O G P A S S A G E

    Dynamic lighting in variable colours, can be walked on,

    protected against moisture, as lighting accent or continuous

    row system PHAOS LINE.

  • PHAOS ANALOG programming

    Products are generally supplied with a default program

    Up to 10 colours can be mixed and stored

    Program steps are detected by monitoring LEDs in various modes

    Time setting for individual colours

    Definable dissolve/fading times

    Special setting for white colour

    Program is stored in EEPROM in the event of power failure

    Easy-to-define master controls the slaves (all slaves operate identically)

    Master can be selected on the product itself or by using a separate analog

    control unit in the case of PHAOS lighting tile and PHAOS XENO LED

    Separate control unit must be used for PHAOS lighting tube and PHAOS LINE

    Master and slave principleControlled synchronised sequences

    PHAOS lighting tile LED ANALOG

    230 V AC max. 1 master, 9 slaves

    Power supplyunit 25 W

    Bus line 60 800 117

    Power supplyunit 25 W

    Power supplyunit 25 W

    Power supplyunit 25 W

    PHAOS ALED LKmaster

    PHAOS ALED LK

    PHAOS ALED LK

    PHAOS ALED LK

    230 V AC

    1 master (separate analog control unit)9 slaves

    Bus line 60 800 117

    Power supplyunit 25 W

    Power supplyunit 25 W

    Power supplyunit 25 W

    PHAOS ACTRL

    60 810 440

    PHAOS ALED LK

    PHAOS ALED LK

    PHAOS ALED LK

    PHAOS lighting tile LED ANALOGwith separate analog control unit

    PHAOS lighting tile LED ANALOG

    230 V AC

    Use signal amplifierif more than 10 PHAOSLED luminaires (lightingtiles, lighting tube, PHAOSLINE) are networked overanalog bus

    Bus line 60 800 117

    Power supplyunit 25 W

    Power supplyunit 25 W

    PHAOS ALED LK

    No. 10 resp.No. 20 resp.No. 30 etc.

    Signal amplifier60 810 441

    PHAOS ALED LK

    No. 11 resp.No. 21 resp.No. 31 etc.

    PHAOS lighting tube LED ANALOG 310 mm

    230 V AC Bus line 60 800 117

    Power supplyunit 25 W

    Power supplyunit 25 W

    PHAOS ACTRL

    60 810 440

    PHAOS ALED lighting

    tube 310 mm

    PHAOS ALED lighting

    tube 310 mm

    PHAOS ALED lighting

    tube 310 mm

    PHAOS ALED lighting

    tube 310 mm

    1 master (separate analog control unit 60 810 440 must be used); up to 9 slaves (310or 900 mm lighting tube); 1 power supply unit drives up to two 310 mm lighting tubes

  • 31P H A O S A N A L O G C O N F I G U R A T I O N S

    PHAOS ANALOG BUS

    Up to 10 luminaires per group; one luminaire acts as the master

    Separate control is possible using PHAOS A CTRL (art. no. 60 810 440).

    Analog control unit performs master function, connected luminaires operate

    in slave mode

    Up to 10 networked systems can be mixed. Prerequisite: all systems are part

    of the PHAOS ANALOG product family. Luminaires groups comprising more

    than 10 luminaires require signal amplifier (art. no. 60 810 441)

    24 V control voltage for control unit (art. no. 60 810 440) and for signal

    amplifier is tapped from the nearest PHAOS ANALOG luminaire installed;

    for PHAOS XENO LED ANALOG, a compact DC power supply unit

    (e.g. art. no. S7 003 150) provides the 24 V

    PHAOS lighting tube LED ANALOG and PHAOS LINE LED ANALOG are

    programmed and switched using the PHAOS A CTRL analog control unit

    (art. no. 60 810 440)

    Bus wiring between PHAOS ANALOG luminaires uses an 8-core telephone

    cable with RJ45 telephone socket/connector

    PHAOS A XENO without separate control unit

    230 V AC 1 master, 9 slaves

    PHAOS AXENO

    master

    Bus line 60 800 117

    PHAOS AXENO

    PHAOS AXENO

    PHAOS AXENO

    Power supplyunit 8 W

    230 V AC 1 master, 9 slaves

    PHAOS A CTRL60 810 440

    PHAOS AXENO

    PHAOS AXENO

    PHAOS AXENO

    PHAOS A XENO with separate control unit

    PHAOS lighting tube LED ANALOG 900 mm

    230 V AC

    1 master (separate analog control unit 60 810 440 must be used),up to 9 slaves (310 or 900 mm lighting tube)

    Bus line 60 800 117

    Power supplyunit 25 W

    Power supplyunit 25 W

    Power supplyunit 25 W

    PHAOS ACTRL

    60 810 440

    PHAOS ALED lighting

    tube 900 mm

    PHAOS ALED lighting

    tube 900 mm

    PHAOS ALED lighting

    tube 900 mm

    Power supplyunit 25 W

    PHAOS ANALOG, mixed group

    230 V AC

    Typical mixed group consisting of 1 master (separate analog control unit) and 9 slaves(in this case, the first LED lighting tile could also function as a master)

    Bus line 60 800 117

    Power supplyunit 25 W

    Power supplyunit 25 W

    Power supplyunit 25 W

    Power supplyunit 25 W

    PHAOS ACTRL

    60 810 440

    PHAOS ALED LK

    PHAOS ALED LK

    PHAOS ALED LK

    PHAOS ALED lighting

    tube 900 mm

    PHAOS ALED lighting

    tube 310 mm

    PHAOS ALED lighting

    tube 310 mm

    PHAOS AXENO

    PHAOS AXENO

    PHAOS AXENO

    PHAOS ANALOG

    230 V AC

    Use signal amplifier if morethan 10 PHAOS A XENO LEDspotlights are networked overanalog bus. In this case, aseparate power supply unit(e.g. S7 003 150) is neededin order to provide the 24 Vbus supply voltage

    Bus line 60 800 117

    Power supplyunit 8 W

    Signal amplifier60 810 441

    PHAOS AXENO LED

    No. 10 resp.No. 20 resp.No. 30 etc.

    PHAOS AXENO LED

    No. 11 resp.No. 21 resp.No. 31 etc.

  • Products are generally supplied with a default program

    Up to 14 colours can be mixed and stored

    (stand-alone mode)

    Almost unlimited programming options via digital bus

    Program steps are detected via display

    Time setting for individual colours from 3 s to 3 hrs

    Defined dissolve/fading times for dynamic light

    (fast, medium, slow)

    Program is stored in the event of a power failure

    Stand-alone function in the case of PHAOS lighting tile

    and PHAOS XENO LED

    Generally decentralised programming for PHAOS

    lighting tube

    Various decentralised programming options using

    LUXMATE components

    Please also refer to pages 40 to 42 for further

    product details and order wording, and to page 43

    for installation and mounting tips.

    PHAOS DIGITALHigh-end dynamic lighting in variable colours

  • 33P H A O S D I G I T A L B U S - C O N T R O L L E D

    Stand-Alone

    Easy-to-program PHAOS lighting tile LED DIGITAL

    and PHAOS XENO LED DIGITAL spotlight. The desired

    program steps are clearly visible on the rear display.

    PHAOS DIGITAL

    The digital bus enables control individual luminaires

    separately and independently.

    All PHAOS DIGITAL luminaires can be configured

    as a group

    No limit using a 2-wire digital bus

    PHAOS XENO LED DIGITAL PHAOS lighting tile LED DIGITAL

    PHAOS lighting tube LED DIGITAL

  • Please contact your nearest Zumtobel Staff representative if you have any queries regarding programming. We

    will be glad to advise you on the extensive design options available using PHAOS DIGITAL.

    Touch panel for control and

    programming of several PHAOS

    DIGITAL luminaire groups. It is

    possible to retrieve and display

    the settings of up to 20 lighting

    scenarios for 30 groups of

    luminaires.

    Selectively creating lighting scenes by controlled changes in the colour,

    intensity and direction of light PHAOS DIGITAL opens up an entirely

    new world of design possibilities.

    Project-specific solutions available on request

    LUXMATE engineer uses a

    PC to carry out programming

    PC interface

    LM-BV (bus power supply,

    max. 100 bus devices)

    LM-ZSQ (sequencer)

    Active Light perfectionCreative freedom thanks to separatecontrol of individual bus devices

  • 35P H A O S D I G I T A L C O N F I G U R A T I O N S

    PHAOS DIGITAL, mixed group

    230 V AC LUXMATE 2-wire BUS

    Power supplyunit 25 W

    Power supplyunit 25 W

    Power supplyunit 25 W

    PHAOS DLED LK

    PHAOS DLED LK

    PHAOS DLED LK

    PHAOS DLED lighting

    tube 310 mm

    PHAOS DLED lighting

    tube 310 mm

    PHAOS DXENO

    PHAOS DXENO

    Power supplyunit 25 W

    30 or 95 PHAOS luminaires can

    be connected depending on the

    bus power supply used.

    PHAOS XENO LED DIGITAL

    230 V AC

    PHAOS DXENO

    LUXMATE 2-wire BUS

    PHAOS DXENO

    PHAOS DXENO

    PHAOS DXENO

    PHAOS lighting tile LED DIGITAL

    230 V AC LUXMATE 2-wire BUS

    Power supplyunit 25 W

    Power supplyunit 25 W

    Power supplyunit 25 W

    PHAOS DLED LK

    PHAOS DLED LK

    PHAOS DLED LK

    PHAOS lighting tube LED DIGITAL 310 mm

    230 V AC LUXMATE 2-wire BUS

    Power supplyunit 25 W

    Power supplyunit 25 W

    PHAOS DLED lighting

    tube 310 mm

    PHAOS DLED lighting

    tube 310 mm

    PHAOS DLED lighting

    tube 310 mm

    PHAOS DLED lighting

    tube 310 mm

  • LEDOS RGB recessed floor and wall luminaires

    LEDOS RGB round c Cat. no. kg Order no.

    Luminaire housingBEH D120 H Deep version, can be driven over* 0,8 S7 710 660

    Board unitPLR 230V RGB S7 711 050* Screw-fastened cover.

    LEDOS RGB square c Cat. no. kg Order no.

    Luminaire housingBEH Q120 H Deep version, can be driven over* 0,6 S7 710 670

    Board unitPLR 230V RGB S7 711 050* Screw-fastened cover.

    Recessed floor and wall luminaire With screws in stainless-steel ring for cavity-wall/plaster fixing or floor mounting

    as drive-over version Housing made of die-cast aluminium, titanium powder-coated Cover ring made of special steel Frosted cover glass Load carrying capacity up to 1000 kg/20 km/h Board unit must be ordered separately Can be installed in cavity or concrete wall Kit for cavity installation included in scope of supply IP 67 for installation in floor Protection class I Installed load: approx. 2.0 W

    LEDOS concrete casting surround, round Cat. no. kg Order no.

    AccessoriesFloor concrete casting surround D111 (deep design) for S7710660 0,1 S7 710 640

    Concrete casting surround Casting surround made of polypropylene For installation of LEDOS RGB round (S7 710 660) in concrete or masonry

    115

    111

    S7 710 640

    LEDOS concrete casting surround, square Cat. no. kg Order no.

    AccessoriesFloor concrete casting surround Q111 (deep design) for S7710670 0,1 S7 710 650

    Concrete casting surround Casting surround made of polypropylene For installation of LEDOS RGB square (S7 710 670) in concrete or masonry

    115

    111x111

    S7 710 650

    113

    2 120

    110

    Recessed floor and wall luminaire With screws in stainless-steel ring for cavity-wall/plaster fixing or floor mounting

    as drive-over version Housing made of die-cast aluminium, titanium powder-coated Cover ring made of special steel Frosted cover glass Load carrying capacity up to 1000 kg/20 km/h Board unit must be ordered separately Can be installed in cavity or concrete wall Kit for cavity installation included in scope of supply IP 67 for installation in floor Protection class I Installed load: approx. 2.0 W

    113

    2 120x120

    110 x 110

    To specify e.g.: LEDOS RGB round BEH D120 H Deep version S7 710 660

  • 37L E D O S R G B I N S T A L L A T I O N

    Installation in the floor

    Installation in a veriety of different floor

    types: concrete, tiles, carpet, wood.

    When installing LEDOS RGB in floors, we

    recommend star-shaped circuits.

    Truly water resistant for exterior

    installation

    At least 30 cm of gravel under the reces-

    sing box for good drainage

    Use flexible rubber sheathed cable, suita-

    ble for damp areas

    Tightly close PG gland

    Secure opposite screws of luminaire

    frame

    Secure installation

    Secure installation in carity walls (wood,

    plaster) with swivel brackets

    Installation in ceilings and walls

    (concrete/brick)

    Vertical adjustment of recessed box in the

    wall to define the position of the luminaire

    housing.

    LEDOS RGB Floor recessed (interior)

    LEDOS RGB Ground recessed (ex-terior)

    Wall thicknesses and recessed depthof 230 mm

    Installation/wiring for wall-mounting

    Level installation

    Secure installation in carity walls

    115 mm

    230 mm

  • PHAOS ANALOG

    PHAOS LED ANALOG lighting tile xc Cat. no. kg Order no.

    Lighting tilePHAOS A LED-LK 2,1 60 810 426PHAOS Wall-mounted frame titanium 0,3 60 800 070

    AccessoriesElectronic transformer ETR 230V-AC/24V-DC/25 W 0,15 S7 003 2305 m bus line with RJ 45 coupling 0,2 60 800 117

    LED luminaire (ANALOG) with variable colours Homogeneous light distribution Individually programmable and bus-compatible Protective low voltage: 24 V-DC Wattage: max. 16 W Surface mounting Variable installation position Wall and group mounting with mounting frame, titanium colour High impact resistant polycarbonate diffuser Low surface temperature Protection class III Electronic transformer S7 003 230 must be ordered separately

    228 x 22831

    PHAOS LED ANALOG lighting tube xc Cat. no. kg Order no.

    Lighting tube for surface-mountingPHAOS A LED-LR 310 AN 0,7 60 810 427PHAOS A LED-LR 900 AN 60 810 429

    Lighting tube for flush-mountingPHAOS A LED-LR 310 UP 0,7 60 810 428PHAOS A LED-LR 900 UP 60 810 430

    AccessoriesElectronic transformer ETR 230V-AC/24V-DC/25 W 0,15 S7 003 2305 m bus line with RJ 45 coupling 0,2 60 800 117For cavity-wall or flush mounting, please order UP55 flush sockets separately at your specia-list electrical supplier.

    LED luminaire (ANALOG) with variable colours Homogeneous light distribution Direct and indirect lighting effects thanks to flexible fastening Bus-compatible Protective low voltage: 24 V-DC Wattage: max. of 12 W (310 mm) or max. of 36 W (900 mm) Housing made of anodised aluminium High impact resistant polycarbonate diffuser Length: 310 mm resp. 900 mm Variable installation position Surface or flush mounting Low surface temperature Protection class III Electronic transformer S7 003 230 must be ordered separately

    310/

    900

    23

    355

    150

    40

    2222

    8282

    PHAOS XENO LED ANALOG c Cat. no. kg Order no.

    Spotlight for surface mountingPHAOS A XENO LED AN 1,9 60 810 4315 m bus line with RJ 45 coupling 0,2 60 800 117

    LED spotlight (ANALOG) with variable colours For floodlighting Individually programmable and bus-compatible Wattage: max. of 22 W Rotates through 365 Housing made of die-cast aluminium Colour: titanium High impact resistant polycarbonate diffuser Universal joint, pivots through 90 Can be installed on ceiling and on wall Low surface temperature

    299

    282

    12

    5

    To specify e.g.: PHAOS LED ANALOG lighting tile PHAOS A LED-LK 60 810 426

  • 39L E D M U L T I C O L O U R L U M I N A I R E S

    P H A O S A N A L O G

    PHAOS LINE E LED ANALOG c Cat. no. Order no.

    Surface-mounted luminairePHAOS-L A A360 60 810 434PHAOS-L A A965 60 810 435

    Recessed luminairePHAOS-L A E360 60 810 432PHAOS-L A E965 60 810 433

    PHAOS LINE concrete casting box Cat. no. Order no.

    AccessoriesConcrete floor casting surround L = 380 mm* 60 810 436Concrete floor casting surround L = 1,000 mm* 60 810 437

    Concrete casting surround Material: special steel With cover for sealing casting surround during concrete work

    120

    85

    ca.380/1000*

    PHAOS transformer w Cat. no. kg Order no.

    TransformerElectronic transformer ETR 230V-AC/24V-DC/25 W 0,2 S7 003 230

    Transformer Electronic transformer for LED modules High light output ratio Short-circuit breaking with automatic restart Overload protection with power feedback control Electrical connections: primary side: 2-pole plug-in terminal strip; secondary

    side: 2x2-pole plug-in terminal strip Only for use in typical interior applications

    34

    120

    72

    S7 003 230

    PHAOS control unit, ANALOG Cat. no. kg Order no.

    Accessories5 m bus line with RJ 45 coupling 0,1 60 800 117Analog control unit 0,1 60 810 440Signal amplifier* 0,1 60 810 441

    Control unit (ANALOG) For programming and control of PHAOS ANALOG luminaires Required for PHAOS lighting tube LED ANALOG and PHAOS LINE LED ANALOG Optionally PHAOS XENO LED ANALOG and PHAOS lighting tile LED ANALOG Voltage supply: 24 V-DC Bus connection via 8-pole bus line with RJ 45 coupling Can be installed in double UP55 flush socket Upright installation position Only for use in typical interior applications

    160

    80

    * Signal amplifier needed if more than 10 PHAOS ANALOG products per group.

    Available Nov. 2002

    * For exact dimensions, please contact your Zumtobel Staff representative.

    LED surface mounted luminaire (ANALOG) with variable colours Technical lighting features designed

    for indirect lighting With wall-mounted fitting, pivots

    through 20 Horizontal or vertical installation

    Cover frame made of V4A specialsteel

    Frosted safety glass Maximum load: 500 kg Wattage: max. of 12 W (360 mm) /

    max. of 36 W (965 mm) Protection type IP 67 Protection class II Two PG13.5 cable glands (for looping) Controlled via 60 810 440 analog

    control unit (please order separately)

    Housing: aluminium extrusion/die-cast aluminium

    Colour: titanium High impact resistant polycarbonate

    diffuser Wattage: max. of 12 W (360 mm)/

    max. of 36 W (965 mm)

    Protection type IP65 Protection class II Two PG13.5 cable glands (for looping) Controlled via 60 810 440 analog

    control unit (please order separately)

    LED recessed floor/wall luminaire(ANALOG) with variable colours Homogeneous light distribution Housing: aluminium extrusion/die-

    cast aluminium Colour: titanium

  • PHAOS LED DIGITAL lighting tile Cat. no. kg Order no.

    Lighting tilePHAOS D LED-LK 2,1 60 810 296PHAOS Wall-mounted frame titanium 0,3 60 800 070

    AccessoriesElectronic transformer ETR 230V-AC/24V-DC/25 W 0,15 S7 003 230

    228 x 22831

    PHAOS LED DIGITAL lighting tube Cat. no. kg Order no.

    Lighting tube for surface-mountingPHAOS D LED-LR 310 AN 0,7 60 810 297

    Lighting tube for flush-mountingPHAOS D LED-LR 310 UP 0,7 60 810 298

    AccessoriesElectronic transformer ETR 230V-AC/24V-DC/25 W 0,15 S7 003 230

    For cavity-wall or flush mounting, please order UP55 flush sockets separately at your specia-list electrical supplier.

    310

    23

    355

    150

    40

    2222

    8282

    PHAOS XENO LED DIGITAL Cat. no. kg Order no.

    Spotlight for surface mountingPHAOS D XENO LED AN 1,9 60 710 028

    299

    282

    12

    5

    PHAOS transformer Cat. no. kg Order no.

    TransformerElectronic transformer ETR 230V-AC/24V-DC/25 W 0,2 S7 003 230

    Transformator Electronic transformer for LED modules High light output ratio Short-circuit breaking with automatic restart Overload protection with power feedback control Electrical connections: primary side: 2-pole plug-in terminal strip; secondary

    side: 2x 2-pole plug-in terminal strip Only for use in typical interior applications

    PHAOS DIGITAL

    c

    c

    c

    w

    LED luminaire (DIGITAL) with variablecolours Homogeneous light distribution Individually programmable and bus-

    compatible Protective low voltage: 24 V-DC Wattage: max. 16 W Surface mounting Variable installation position

    Wall and group mounting with moun-ting frame, titanium colour

    High impact resistant polycarbonatediffuser

    Low surface temperature Protection class III Electronic transformer S7 003 230

    must be ordered separately

    LED luminaire (DIGITAL) with variablecolours Homogeneous light distribution Direct and indirect lighting effects

    thanks to flexible fastening Bus-compatible Protective low voltage: 24 V-DC Wattage: max. 9 W Housing made of anodised aluminium

    High impact resistant polycarbonatediffuser

    Length: 310 mm Variable installation position Surface or flush mounting Low surface temperature Protection class III Electronic transformer S7 003 230

    must be ordered separately

    LED spotlight (DIGITAL) with variable colours For floodlighting Individually programmable and bus-compatible Wattage: max. 16 W Rotates through 365 Housing made of die-cast aluminium Colour: titanium High impact resistant polycarbonate diffuser Universal joint, pivots through 90 Can be installed on ceiling and on wall Low surface temperature

    To specify e.g.: PHAOS LED DIGITAL lighting tile PHAOS D LED-LK 60 810 296

    34

    120

    72

  • 41L E D M U L T I C O L O U R L U M I N A I R E S

    L U X M A T E P R O F E S S I O N A L

    Time-automation dynamism Cat. no. Order no.

    LM-ZSQ 20 975 720

    For dynamic lighting sequences and for time-based control of LUXMATE system For all dynamic sequences, without PC programming Automatic change of lighting scenes Adjustable dissolve speeds Automatic switch-on/off times Installation: on 35 mm rail

    90 35

    70 59

    Control and programming touch panel Cat. no. Order no.

    LM-CPA Colour display 22 146 153LM-MPA Monochrome display 22 146 166

    Touch panel for programming and control of the LUXMATE system in individualrooms

    ON/OFF 20 lighting scenes can be called up Further control of the lighting, blinds, air conditioning services etc. Optional: Additional momentary-action switches for ON/OFF and scenes

    120 45

    4

    20015

    690 13

    5

    Bus supply room/switch cabinet Cat. no. Order no.

    LM-BVS35 22 115 026

    Zur Spannungsversorgung eines Busbezirks mit maximal 30 PHAOS DIGITAL Produkten

    Montage: auf 35-mm-Hutschiene

    90 35

    35 59

    Alternatively Order no. 20 975 247 LM-BV EO2 for 100 Bus components (95 PHAOS)

  • 163

    229

    229

    95

    20

    Cable outlet

    Drilled holes for screws 4 for wall plugs

    A A

    71

    Lighting tile wall-mounting

    The PHAOS lighting tile LED ANALOG or DIGITAL can

    be easily wall-mounted using the wall mounting frame

    (art. no. 60 800 070).

    Installing a lighting tube using wall

    mounting bracket

    Allow for distance to power outlet when installing the

    wall mounting bracket.

    Direct installation without a wall

    mounting bracket

    Dimensions for flush and cavity-wall sockets for fixing

    LED lighting tube: 310 mm (A = 239 mm) and 900 mm

    (A = 829 mm).

    146

    60

    Notes on installation

    355

  • 43P H A O S A N A L O G + D I G I T A L I N S T A L L A T I O N

    PHAOS ANALOG control unit

    (art. no. 60 810 440)

    Installed using double UP 55 flush socket

    in brickwork or cavity walls

    Control voltage 24 V DC, 2-wire

    RJ 45 socket for 8-core control line

    IP 20 when installed indoors

    Upright mounting position

    PHAOS ANALOG

    No-tool bus connection with 8-core

    telephone cable and RJ 45 connector

    PHAOS DIGITAL

    2-wire bus line

  • Throughout the world, Zumtobel Staff

    is the competent reliable partner for

    innovative lighting solutions in all areas

    of application of professional interior

    lighting:

    Industry and Engineering

    Sport and Leisure

    Transit areas and Car parks

    Offices and Education

    Presentation and Retail

    Hotels and Catering

    Art and Culture

    Health & Care

    Orientation and Safety

    Active Light

    With production plants in Austria,

    Germany, Australia and the USA, and

    sales organisations in all major Euro-

    pean markets as well as commercial

    agencies in most regions of the world,

    Zumtobel Staff is one of the biggest

    international enterprises in the lighting

    sector.

    As a leader in innovation, we guarantee

    our customers global competence in

    lighting consulting and design assist-

    ance, superior product quality and

    future-proof technologies from indivi-

    dual luminaires to electronic lighting

    management systems.

    Corporate goal: We want to use light

    to create worlds of experience, make

    work easier and improve communica-

    tions and safety while remaining fully

    aware of our responsibility to the envi-

    ronment.

    P R E S E N T A T I O NA N D R E T A I L

    A R T A N D C U L T U R E

    H O T E L S A N D C A T E R I N G

    S P O R T A N D L E I S U R E

    H E A L T H & C A R E

    T R A N S I T A R E A SA N D C A R P A R K S

    O F F I C E S A N D E D U C A T I O N

    I N D U S T R Y A N D E N G I N E E R I N G

  • Art.-No. 04 797 310-UK 10/02 Zumtobel StaffTechnical data was correct at time of going to press. We reserve the right to make technical changes without notice. Please contact your local sales office for further information. Printed on environmentally-friendly chlorine-free paper. Printed on Luxosamt Offset.

    United Kingdom

    Zumtobel Staff Lighting Ltd.

    Unit 4 - The Argent Centre,

    Pump Lane

    Hayes/Middlesex UB3 3BL

    Tel. +44/(0)20 8589 1800

    Fax +44/(0)20 8756 4800

    USA/Canada/Mexico

    Zumtobel Staff Lighting

    3300 Route 9W

    Highland, New York 12528

    Tel. +1/(0)845/691 62 62

    Fax +1/(0)845/691 62 89

    http://www.zumtobelstaffusa.com

    Australia

    Zumtobel Staff (Australia) Pty. Ltd.

    2 Wella Way

    2250 AUS-Somersby, NSW

    Tel. +612/(0)43/402 140

    Fax +612/(0)43/402 108

    Head offices

    Zumtobel Staff GmbH

    Schweizer Strasse 30

    Postfach 72

    A-6851 Dornbirn, AUSTRIA

    Tel. +43/(0)5572/390-0

    Fax +43/(0)5572/22 826

    Zumtobel Staff GmbH & Co. KG

    Grevenmarschstr. 74-78

    D-32657 Lemgo, GERMANY

    Tel. +49/(0)5261/2 12-0

    Fax +49/(0)5261/2 12-9000

    International Freephone/fax numbers:

    Tel. 00800 THE LIGHT

    or 00800 843 54448

    Fax 00800 0843 5444

    E-Mail: [email protected]

    http://www.zumtobelstaff.com

    Track and spots

    Lighting systems

    Downlights/uplights

    Recessed luminaires

    Surface-mounted and pendant luminaires

    Wallwashers

    Uplights, wall lights and task lights

    Batten luminaires and continuous row luminaires

    High-bay reflector luminaires

    Luminaires of higher protection

    Lighting management

    Emergency lighting

    Hospital trunking


Recommended