of 51
7/22/2019 LEMAG Catalogue
1/51
LEHMANN & MICHELSLEHMANN & MICHELSSafety - Accuracy - Experience
Optimum use of power
Measuring instruments for
the Marine industry
Product Catalog
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
2/51
PREMET
PREMET I ndicators PREMET Indicators PREMET Indicators
are designed and manufactured
for use on diesel and gas engine
applications for the marine
market and mobile and stationary
power stations.The equipment is not affected or
restricted by heavy fuel oil.
Main applications:
Combustion engines
Compressors
Hydraulic-equipments
Steam piston engines
Integral motors
Since 1911MeasuringInstruments
Type L, LS and XLElectronic Indicators
PREMETIndicators
robust
precise
reliable
easy handling
approved quality
are measuring and recording
precisely with the highest
resolution
Peak of pressure-pmax Course of pressure p/alpha
Max. increase in pressure dp/da
You can analyse:
Indicated power (KW/hp)
Mean indicated pressure (MIP)
Power distribution
Ignition-pressure distribution
Revolution (rpm)
meet the highest
Quality performances:
GL-Type approved
CE-approval Approval according to
ISO 9001 (LRQA Lloyds)
Quality with the experience of
15 years development and
manufacturing of electronic
indicators, 90 years experience
of mechanical indicators.
Standard versionwith integrated pressure
sensor Optional version:Pressure sensor with armoured wire.
NEWF
EATURES!
Higherresolut
ion
Optional
vibrationmoni
toring
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
3/51
PREMET
PREMET software offers several diagrams to
analyse combustion and pressure changes in
the cylinders. By using the cursor it is possible
to move along any curve and to receive the
exact measured values shown in the table. A
series of measurements is comparable to any
other series of measurements without any
restrictions. The PREMET software includes acompression program to send data files per
e-mail or satellite fast and effectively.
NEW! The PREMET indicators now have even
higher resolution and feature an optional
vibration diagram. In order to measure
vibration an ACL-sensor (acceleration sensor
measuring the transfer of energy within and
through a conductor) is needed.
A vibration diagram displaying valve opening,
combustion and valve closing is providedto ease identifying of malfunctions. Some
common problems like broken piston rings,
liners or valves can easily be indicated.
Since 1911MeasuringInstruments
Combustion + Injections Diagram Reference comparison 3-D Diagram
Pressure vs. crank angle Pressure rise vs. crank angle Power diagram
Vibration diagram Pmax Pressure vs. time
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
4/51
PREMET
Since 1911MeasuringInstruments
PREMET L L(h) LS LS(h) XL XL(h) XL-MS XL-MS(h)
Power diagram vs. crankangle curve
Comparison withreference measurements
Pmax
Revolution
Measurement of injection
pressure (fuel)
Acceleration monitoring(ACL)
Pressure vs. time
Deviation of pressurepeak vs. crank angle
Compensation of torsionalforce
Compensation of torsional
vibration
Units in differentlanguages
Pressure sensor witharmoured cable (h)
TDC-Sensor
TDC-Sensor with 360resolution impulse sensor
TDC-Control by software
Keylegend: Standard Optional
Analyse software Printer Order no. Model (h) witharmoured cable,
order no.
PREMET L Not available Not available 28040005 28040006
PREMET LS DOS/Win 95 up to XP Optional 28040003 28040078
PREMET XL DOS/Win 95 up to XP Optional 28040016 28042055
PREMET XL-MS DOS/Win 95 up to XP Optional 28040325 28040326
PREMET XL-**/Fuel DOS/Win 95 up to XP Optional On request On request
PREMET XL-**/ACL DOS/Win 95 up to XP Optional On request On request
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
5/51
PREMET
Since 1911MeasuringInstruments
100
/05/2005/E
Subject to change without notice
Technical Data L LS XL XL-MS XL-**(fuel)
Range ofignition pressure
0 to 250 bar 0 to 250 bar 0 to 250 bar 0 to 250 bar 0 to 250 bar
Range ofinjection pressure
not included not included not included not included to 1600 bar
Range of revolutions(rpm)
40 to > 1.800 40 to > 1.800 40 to > 1.800 40 to > 1.800 40 to > 1.800
Max. no. of cylinders20 20 20 20 20
Max. no. ofmeasurements/cylinder
20 20 20 20 20
GL type approval
Manufactured acc. ISO 9001
CE - approval
Compensation of temperature
Type of accumulator Ni-MH Ni-MH Ni-MH Ni-MH Ni-MH
Max. battery capacity ca. 120 Cyl. ca. 120 Cyl. ca. 120 Cyl. ca. 120 Cyl. ca. 120 Cyl.
PC-interface
Software incl. incl. incl. incl.
Direct print Option Option Option Option Option
Stainless steel-housing withisolated thermogrip
Display backlight
Temperature changecorrected pressure sensor
Accuracy better than better than better than better than better than
1,6 1,6 1,6 1,6 1,6
Your support service:
Keylegend: yes no
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
6/51
7/22/2019 LEMAG Catalogue
7/51
PREMET online
Subject to change without notice
The drawingshows anexample systemarrangement for asix cylinder main
engine. TheMultiscan SensorWheel and theMS-Sensor arepictured on theleft side of theengine.
LEMAG PREMET online for the main engine
The picture shows the torsionalvibration pattern of the crankshaftduring 720 (two complete revolu-tions).
The limits to measure torsionalvibration change can be individu-ally defined in the software.
The system warns automaticallyif the vibration change exceedsthe given limits.
PREMET Multiscan Sensor Wheel
The MS-Sensor measures crankshaft rotation in 1 steps. The informationis further analysed by the software of the engine sampling unit.The advantage to tooth profile resolution on the flywheel is more directrecording of engine angular velocities.
Expenditure on installation is minimised by manufacturing the MS-SensorWheel according to the shafts diameter. Drilling of the flywheel or shaftfor installation is not necessary.
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
8/51
PREMET online
The information gathered from the pressure sensors is collected by the PREMET engine samplingunit to be further analysed by PREMET online software. This software gives you a wide variety ofdiagrams delivering important and accurate information relating to the engines performance.
By using PREMET online you are now in a position to recognise the most common problems ondiesel and gas engines before they cause major break downs, expensive repairs or time schedule
delays. After a brief look at the PC screen you are in most cases able to tell immediately why theengine, or some of its cylinders, are not producing the expected power.
Subject to change without notice
PREMET online offers you the possibility to control your engineperformance continuously
p-alpha diagram single cylinder p/V diagram single cylinder Bargraphs
p-alpha diagram all cylinders Torsional vibration spectrum Engine data table
Engine performance diagram Trend function Alarm set up
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
9/51
108/
12/2004/E
PREMET online
Cylinder Pressure SensorPREMET online type 250/2/IC/1AA:
Measuring range: Up to 250 bar
Measuring time: Up to 2 h daily, 24 h once a month in heavy fuel working
Precision: Class 1,6 % fs
Mounting: Indicator valve (other applications on request)
Engine Sampling UnitPREMET online type 250/2-24/230/1AA:
Type: High speed industrial calculator
Temperature: 60 C max.
Multiscan sensorPREMET online:
Type: Custom made Crank Angle Sensor
Precision: Real 1 resolutionMeasuring type: Opto-electronic
Pscav SensorPREMET online type 05/2-24/XX/1AA (optional):
Type: 4-20 mA Pressure Sensor
Precision: Class 1,6 % fs
Measuring range: 0-4 bar
Fuel Pressure SensorPREMET online type 2000/FC/1AA (optional):
Measuring range: Up to 2000 barConnection: Cone connection
Torsional vibration measurement:
Type: Multiscansensor PREMET online
Engine Type: under 300 rpm, other engine types on request
Measuring time: 24 hours a day
Technical data of system components:
Subject to change without notice
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
10/51
7/22/2019 LEMAG Catalogue
11/51
Art. No.PREMET printer
PREMET printer, 110-240 V, complete, ready to use
Printer paper, big roll
Printer paper, small roll
Spare ribbon cassette, black
Spare ribbon cassette, blue
For PREMET L, LS, XL
Inductive TDC-Sensor (without holder)
Holder for TDC-SensorLaser TDC-Sensor, without holder
Holder for laser sensor
Reflective tape for laser, 1 meter roll
PREMET, general accessories
Wrench for connecting nut
Interference filter
Spare service case with lining (please, mention the PREMET model number)
Spare charger for PREMET 110-240 V (please, mention the wall socket type)
PREMET Multiscansensor with 360 real single signals
MS-Sensor, complete (please, mention the crankshaft diameter)
MS-Sensor, spare Multiscan impulse pick up
MS-Sensor, holder for Multiscan impulse pick up
PREMET Multiscansensor cable
Cable 20: MS Connecting cable, 10 meter
Cable 21: MS Connecting cable, 40 meter
Cable 22: MS Connecting cable inclusive junction box, 10 meter
Cable 23: MS Connecting cable inclusive junction box, 40 meter
Cable 99: MS Connecting cable, optinal halogen free cable
2802 4300
2802 4211
2802 4212
2804 0082
2802 4111
2804 0027
2804 00172804 0035
2804 0036
2804 0038
2604 5092
2802 0130
2604 0006
2804 0037
2804 0040
2804 0039
2804 0134
2804 0041
2804 0042
2804 0043
Art. No.
Art. No.
Art. No.
Art. No.
Printer Laser with holder TDC-Sensor MS-Sensor wheel
PREMET
Accessories
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
12/51
PREMET
Accessories
Please, contact
Subject to change without notice101/07/2005/E
Art. No.PREMET software and upgrades
Upgrade from PREMET L to PREMET LS
Upgrade from PREMET L to PREMET XL
Upgrade from PREMET L to PREMET XL-MS
Upgrade from PREMET LS to PREMET XL
Upgrade from PREMET LS to PREMET XL-MS
Upgrade from PREMET XL to PREMET XL-MS
Upgrade to PREMET XL** fuel (please mention the serial number)A yearly calibration with software updating, inclusive Certificate according to ISO 9001
PREMET special edition for test banks
PREMET software for WIN 95 to NT, inclusive operation and installation manual
PREMET software for DOS, inclusive operation and installation manual
PREMET Data and Printer cables
Cable 1: Data transfer cable PREMET PC 9 poles
Cable 2: Data transfer cable / printer cable PREMET PC 25 poles
Cable 3: TDC connecting cable, 10 m
Cable 4: TDC connecting cable, 40 mCable 5: TDC connecting cable inclusive junction box, 10 m
Cable 6: TDC connecting cable inclusive junction box, 40 m
Cable 99: TDC connecting cable, optional halogen free cable
Adapter 1 = from 9 poles to 25 poles (serial) for cable 1
Adapter 2 = from 25 poles to 9 poles (serial) for cable 2
Adapter 3 = from 25 poles to 25 poles, transposed for cable 2 and adapter 1 for printer connection
PREMET additional operation and installation manuals
Additional operation and installation manual for PREMET, in English (please, always
mention model and serial number)
Additional operation and installation manual for Software, in English (please, always
mention model and serial number)
PREMET injection pressure measuring
Spare fuel sensor with cable (please, mention the serial number)
Spare high pressure valve, 2000 bar, complete (please, mention the model number)
2804 2257
2804 2258
2804 2259
2804 2260
2804 2257
2804 2256
2804 22612804 0001
2804 0014
2802 4247
2802 4347
Art. No.
2802 4112
2802 4113
2804 0028
2804 00292804 0128
2804 0129
2804 0043
2802 4114
2802 4117
Art. No.
2804 2262
2804 2263
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
13/51
7/22/2019 LEMAG Catalogue
14/51
7/22/2019 LEMAG Catalogue
15/51
7/22/2019 LEMAG Catalogue
16/51
7/22/2019 LEMAG Catalogue
17/51
7/22/2019 LEMAG Catalogue
18/51
7/22/2019 LEMAG Catalogue
19/51
7/22/2019 LEMAG Catalogue
20/51
7/22/2019 LEMAG Catalogue
21/51
INDICATOR VALVES
Indicator valves for al l engine indicators and peak pressure indicators
Correct and reliable connection of the indicator
to the engine is a basic requirement for accurate
measurement. This can only be achieved by
using the right indicator valves between the
engine and the indicator.
The indicator valves are available with two-part
spring loaded spindles or alternatively withservo-operated spindles. Both types are
equipped with a back seat. The valve can be
opened and closed in all temperatures without
using brute force.
The spring loading of the indicator valve spindle
cone prevents any unwanted opening of the
valve, even by unfavorable vibration frequencies.
Therefore a counter nut on the spindle is not
necessary.
Valve with a straight design and flexible spindle
(picture A)
Indicator valve with a connection to the measuring indicator
straight at the top of the valve. Several different threads are
available for the engine connection e.g. 3/4 Wh, M20 * 1,5,
M20 * 2, M20 * 2,5, etc.
LEMAG
valve with a straight design and servo-operated spindle (picture B)
The valve has a small turning radius and is therefore
suitable for use in the most restricted installation spaces.
The valve opens against engine pressure and closes with
engine pressure. Engine connection 3/4 Wh (numerous
adaptors available).
Valve with a 90 design and flexible spindle (picture C)
Indicator valve with a connection to the measuring indicator
in 90 angle (optional 45 angle) Several different threads
are available for the engine connection.
Since 1911MeasuringInstruments
Subject to change without notice
WITH A FLEXIBLE SPINDLE
Max. 250 bar operating pressure
Stainless steel spindle, seat andstem
Connection to the indicator;
standard W27 * 1/10female cone
Connection to the engine;several different lengths, angles
and threads available
Straight and angled extensions
Also special models, ask for
more information
A
B
C
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
22/51
7/22/2019 LEMAG Catalogue
23/51
INDICATOR VALVES
Indicator valves for al l engine indicators and peak pressure indicators
Correct and reliable connection of the indicator
to the engine is a basic requirement for accurate
measurement. This can only be achieved by
using the right indicator valves between the
engine and the indicator.
The indicator valves are available with two-part
spring loaded spindles or alternatively withservo-operated spindles. Both types are
equipped with a back seat. The valve can be
opened and closed in all temperatures without
using brute force.
The spring loading of the indicator valve spindle
cone prevents any unwanted opening of the
valve, even by unfavorable vibration frequencies.
Therefore a counter nut on the spindle is not
necessary.
Valve with a straight design and servo-operated
spindle (picture A)
Indicator valve with a connection to the measuring
indicator straight at the top of the valve. Engines:
Caterpillar, Wrtsil.
Valve with a straight design and servo-operated
spindle (picture B)Indicator valve with a connection to the measuring
indicator straight at the top of the valve. Connection
to the engine through a long pressure canal.
Engines: Catepillar, Wrtsil.
Valve with a 45 angle and spring loaded spindle
(picture C)
Indicator valve with a connection to the measuring
indicator in 45 angle. Connection to the engine
through a short pressure canal. Engines: General Electric.
Since 1911MeasuringInstruments
Subject to change without notice
Indicator valves
USA
Max. 170 - 200 bar operatingpressure
Stainless steel spindle
Connection to the indicator;
Standard W27 * 1/10
Connection to the engine;several different length,
angles and threads available
B
CA
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
24/51
Thread 1/2BSP 3/4Wh R 1/2
Art. No. 21610120 21610013 21610014
INDICATOR VALVESSince 1911Measuring
Instruments
Subject to change without notice133/
07/2005/E
Indicator valve with a straight design and servo-
operated spindle
Max. operating pressure: 200 bar
Test pressure: 300 bar
Art. No. 21910111
Indicator valve with a straight design and servo-
operated spindle
Max. operating pressure: 200 bar
Test pressure 300 bar
Indicator valve with a 45 angle and springloaded spindle
Max. operating pressure: 170 bar
Test pressure: 240 bar
Art. No. 21617022
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
25/51
INDICATORAccessories
Please, contact
Subject to change without notice
Indicator valve cock kits and accessories
LEMAG cock kit in case, complete
Nut for indicator valves with steel cone sealing
Nut for indicator valves with copper sealing
Die nut for indicator valves
Reamer for indicator cocks with guidingLEMAG closing valve for leaking indicator valves
Steel made extensions between the cylinder and indicator valve
Extension, solid, 67 mm, 3/4 Wh
Extension, solid, (please, advice the required length and thread)
Extension, turnable, to straighten indicator valves, 3/4 Wh
Extension, turnable, to straighten indicator valves, (please, advice the required
lenght and thread)
Soft iron sealing, 10 piece/pack (please, advice the required thread of
the indicator cock)
Copper sealing, 10 piece/pack (please, advice the required thread of the indicator cock)
2604 0024
2606 4455
2161 0011
2190 0001
2604 00382904 0001
2162 0311
2162 0313
2606 0455
2606 0457
2102 0002
2164 0227
LEMAG cock kit Die nut Lock nut Extension, turnable
Art. No.
Art. No.
Since 1911MeasuringInstruments
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
26/51
INDICATORAccessories
Please, contact
Art. No.Steel made extensions between indicator valves and measuring instrument
Extension 1 = straight, 150 mm
Extension 2 = straight, 150 mm, insulated
Extension 3 = straight, special length (please, advice the required length)
Extension 4 = straight, special length (please, advice the reguired length), insulated
Angle connection 1 = 15, 150 mm
Angle connection 2 = 15, 150 mm, insulated
Angle connection 3 = 15, special length (please, advice the required length)
Angle connection 4 = 15, special length (please, advice the required length), insulatedAngle connection 5 = 45, 150 mm
Angle connection 6 = 45, 150 mm, insulated
Angle connection 7 = 45, special length (please, advice the required length)
Angle connection 8 = 45, special length (please, advice the required length), insulated
Angle connection 9 = 90, 150 mm
Angle connection 10 = 90, 150 mm, insulated
Angle connection 11 = 90, special length (please, advice the required length)
Angle connection 12 = 90, special length (please, advice the required length), insulated
Angle connection 13 = special angle, 150 mm (please, advice the required angle)Angle connection 14 = special angle, 150 mm, insulated (please, advice the
required angle)
Angle connection 15 = special angle and length (please, send a sketch)
Angle connection 16 = special angle and length (please, send a sketch), insulated
2607 0310
2807 0320
2607 8310
2607 8311
2807 0316
2807 0315
2607 8312
2607 83132807 0317
2807 0318
2607 8318
2607 8319
2607 0320
2807 0310
2607 8320
2607 8321
2807 0322
2808 0323
2807 0324
2807 0325
Extension, straight Extension, 90insulated
Subject to change without notice
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
Since 1911MeasuringInstruments
7/22/2019 LEMAG Catalogue
27/51
Since191' lMeasur inglnstrumentsHeatProtection over
Partnumber:29040011
Protective oversor Indicator alvesFixingEyeletsHeat-Resistant lothPressButton FasteningStandard ype ex stock availableGL Approved,cert. no. 15285H
A revised version of SOLAS Chapter l l-2( Construction FireProtection, ireDetectionand Fire Extinction ) entered into force on1stJuly 2002. This regulation states hat nocomponents insta l led in machinery spacesmay exceeda maximum surface emperatureof 220 C.Indicator a lves n par t icu lar an reach em-peraturesof above 220 C. The LEMAG HeatProtectionCover s a simpleand cost-effectivesolut ion o th is problem.Designmodi f icat ionso indicatorva lvesarenot necessary,rovided hat insulatingcoversare fi tted. lndicatorvalves an continue o beoperatedusingLEMAGHeatProtectionCovers.LEMAGHeat ProtectionCovers re availablenstandard sizesof '160mm @ x 220 mm and160mm @x 400mm. Covers an n addition beta i lor -made ccord ingo your speci f icat ions.
Subject o changewithout notice
7/22/2019 LEMAG Catalogue
28/51
LEMAG
Since 1911MeasuringInstruments
Subject to change without notice116/05/2005/E
robust
precise
reliable
for all speed ranges
GL type approved
incl. ISO 9001 certificate
available ranges:
0-140 bar; 0-180 bar;
0-220 bar; 0-250 bar;All models are fully type approved by Germanischen Lloyd (GL) & incl. ISO 9001 certificate
LEMAG
LS Peak PressureIndicators are measuringthe firing pressure ofinternal-combustion engi-nes. In order to be free ofresidues, the indicatorvalve should be shortly
blown through beforestarting the measurement.To take readings theinstrument has to beconnected to the indicatorvalve by means of a stan-darized connecting nut.
The LEMAG-LS Peak
Pressure Indicator is nowready for use. When theindicator valve is open thepressure gauge will riseand will remain on themaximum. By notice this
value, this indicator valvemust be closed and theinstrument has to bereseted by using the ventscrew fixed at the side.After that, the LEMAG
LS is ready for taking newreadings.
LEMAG
LS Peak PressureIndicators are designed
for single measurements
only (not for continuousoperation). The respectivemeasuring period shouldnot exceed 30 sec. This isnot a problem in normalpractise, as peak pressureis being indicated after
5 sec.
Remarks for order:LEMAG
LS 140
0-140 Bar, Art. No.: 26040001
LEMAG
LS 180
0-180 Bar, Art. No.: 26040002
LEMAG
LS 220
0-220 Bar, Art. No.: 26040004
LEMAG
LS 250
0-250 Bar, Art. No.: 26040015
Peak Pressure Indicator Type LS
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
29/51
LEMAG PEAKmag
LEMAG PEAKmag
A safe solution for peak pressure measurements
LEMAG PEAK mag Indicators measurethe maximal firing pressure of internalcombustion engines.
The measurement:The indicator valve should be blownthrough briefly before starting themeasurement to make sure there areno residues.
Connect the indicator on the
appropriate cylinder and open theassociated indicator valve.
The maximum pressure can now beread on the gauge. After measure-ment close the indicator valve.
The indicator has to be vented usingthe vent screw fitted before the nextmeasurement.
Please, note that the measuringperiod should never exceed30 seconds per cylinder. In normal
practice a peak pressure is indicatedafter 5 seconds measuring time.
Since 1911MeasuringInstruments
Subject to change without notice10
6/07/2005/E
PEAK PRESSUREINDICATOR Safe to use
Pressure range up to 250 bar
(3000 PSI)
Easy to handle
Ready to use package with a case
German precision technology
PEAKmag PEAKmag PEAKmag PEAKmag PEAKmag PEAKmag
140 180 220 250 2000 3000
Double Scale Double Scale
Pressure range 0-140 0-180 0-220 0-250 0-2000 Psi 0-3000 Psi
bar bar bar bar 0-150 bar 0-225 bar
Article number 26040019 26040037 26040036 26040221 26040223 26040224
SAFE TO USEThe LEMAG PEAKmag has beendesigned to protect its user in caseof excessive cylinder pressure.
It features:A) Safety glass gaugeB) Blow out back wallC) Fully safety pattern
Scope of supply
LEMAG PEAKmag
Indicator
Calibration Certificate
according to ISO 9001
standard
Instrument Case
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
30/51
LEMAG
A safe solution for pressure drop measurement
The LEMAG DELTA-PREMET is designed to
measure cylinder pressure drop to highlight worn
valves and piston rings at a very early stage. This
is achieved by measuring the individual pressure
drop of each cylinder. It is a simple, convenient
check and can prevent major damage to the
engine.
NOTE: The instrument is for use on engines that
are not running.
How to measure: Stop the engine and open all
indicator cocks. Turn the engine into firing TDC-
position and connect the DELTA-PREMET to the
relevant cylinder. Make sure to lock the engine in
this position. Inject compressed air through the
DELTA-PREMET into the cylinder up to 6 bar
(max.). Close the ball valve on the instrument and
measure the time taken for the pressure to fall to
1 bar (using the stop watch included). Repeat
these steps for the next cylinder. In the case of an
unexpected pressure drop turn the engine by 720
to release the residues from the valve seats.
Please ensure that the DELTA-PREMET is not sub-
jected to more that 9 bar during the measurement.
The Instrument is equipped with a high quality
stainless steel safety pressure gauge. In case of an
over pressure due to incorrect handling the
instrument includes a replaceable bursting disc to
protect the user and the instrument.
For safety reasons it is recommended that any
replacement of a disc be undertaken by Lehmann& Michels GmbH & Co. KG.
Scope of supplyDELTA-PREMET
Air coupling system for flexible hose
Wrench for connecting nut
Stop watch
Pad (50 sheets)
Delivered in a wooden instrument case
Art. No. 26042001
Since 1911MeasuringInstruments
Subject to change without notice107/05/2005/E
DELTA-PREMET
CYLINDER PRESSURE DROPMEASURING INSTRUMENT
Professional and safe design
Easy to use For all diesel engines
Ready to use package with case
German precision technology
Patent pending
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
31/51
7/22/2019 LEMAG Catalogue
32/51
since 1911measuring
instruments
LEHMANN & M ICHELS GmbH & Co. KG Marlow ring 4 D-22525 Ham burg / Germany
Tel. +49 (0) 40 850 00 61 Fax +49 (0) 40 85118 88 E-mail: [email protected]
LEMAG
Indicator Type 30-M2
robust
precise
rel iable
speedrange up t o 400 rpm
(600 rpm )
t ype app roved (GL)
in cl. ISO 9001 cert if ikat e
All models are fully type approved by Germanischer Lloyd (GL) &incl. ISO 9001 certificate
LEMAG
IndicatorType30-M2 are w ell know nworldwide.
The y are f o r use a nd
applica t ion t o d raw dia-
gra ms on medium speed
Diesel-Engines ( 400 (600)
Rpm).
The LEMAG
IndicatorType 30-M2 is a vaila ble fo rpressure rang es up to
250 ba r. The pre ssure
rang e a re acc. to current
la test eng ine d evelop-
ments.
The sta nda rd instrumen t is
eq uipped w ith a 30 mm
diamet er paper drum, on
req uest a 40 mm d rum is
available.
LEMAG
Indicator Type30-M2 ha s a completesco pe of supply incl. a ll
a ccesso ries co mplet e in a
w ood en case .
Please note: This indicatoris designed to take singlereadings at a max. of 30
sec. per cylinder.
Spring schedu le LEMAG
Indicator Type 30-M2
P ist o n Sp rin g -No . M ea su rin g ra n g e
1/5 0,1 30 ba r
1/5 0,6 50 ba r
1/5 0,5 60 ba r1/5 0,45 70 ba r
1/5 0,4 80 ba r
1/5 0,3 100 ba r
1/5 0,24 125 ba r
1/5 0,2 150 ba r
1/5 0,18 175 ba r
1/5 0,16 200 ba r
1/5 0,12 250 ba r
Other ranges on request availablePisto n d iame ter 1/5 = 9,06Spring no. = scale in mm /1 Bar
Subject to change w i thout not ice112/09/2000
/E
7/22/2019 LEMAG Catalogue
33/51
7/22/2019 LEMAG Catalogue
34/51
7/22/2019 LEMAG Catalogue
35/51
LEMAG
An High-End product for the highest accuracy requirements
Temperature calibration
The dry block principleexcludes the use of oil orother liquids. Heating ofliquids is not needed. Theconstruction is based on a
proven rugged temperaturewell controlled by specialdesigned controller.
The internal micro-processor changes thecontroller parametersdepending of the set pointand temperature of theinternal sensor. The valuesare shown at the internalLCD display with a
resolution of 0,1 C.
Since 1911MeasuringInstruments
12
1/07/2005/E
Temperature calibratorTEMPmag 600
Temperature range
50 C - 600 C
Accuracy 0,8 C
Stability 0,05 C
Low weight and compact design
Complete with all accessories
Interchangeable insertiontubes (optional) withvarious diameters ensurethermal contact to thesensor being tested.
The unit is equipped with
an RS-232 serial interfaceand can easily be connectedto a PC to allow automaticcalibration.
Each calibrator iscalibrated againstprecision equipment,which is according tonational standards.Calibration certificate is
supplied with each unit.
MEETS THE HIGHEST QUALITYREQUIREMENTS
DNV Approval
Approval according to
ISO 9001
TEMPmag
600Temperature range 50 C - 600 C
Resolution (display) 0,1 C
Accuracy 0,8 C
Stability 0,05 C
Heating time 18 min.
Well depth 155 mm
Well diameter 26 mm
Power supply 230 VAC / 50 Hz
(optional 110 VAC/60 Hz)
Weight app. 7,3 kg
Art. No. 21900125
Subject to change without notice
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
36/51
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
since 1911measuring
instruments
Subject to change without notice124/07/2005/E
LEMAG
Pressure testerType CB 250
robust
precise
reliable
incl. ISO 9001
certifikat
pressure range:
up to 250 bar
(other ranges on request)
Complete with all accesoiries, incl. ISO 9001 certifikate
LEMAG-Pressure Tester
Type CB 250 the portable
measuring device forcheck the accuracy of yourindicators and many otherapplications.
No problem any longer toconnect and test yourindicators.
Operation of the LEMAG-
Pressure Tester Type CB
250 can be done eitherwith liquids or gas.
Simply connect your pres-sure pump and checkmechanical indicators aswell as electr. MIP systems.
Technische Daten:Measuringrange: 0-250 bar(other ranges on request)connectingthread: 1/2 ZollTestconnection: Standard-indicator cone,
W 27 x 10
How to order:LEMAG
-
Pressure Tester CB 250
Art. No.: 280 244 00
7/22/2019 LEMAG Catalogue
37/51
118
/07/2005/E
LEMAG
Pressure CalibratorType Pressotest
robust
precise
reliable
incl. ISO 9001 certificate
Measuring range: -1 up to 40 Bar
one hand operation
Of course complete with all accessories incl. ISO 9001 certificate
LEMAG-Pressotest
The pneumatic pressurecalibrator with 4 differentgauges as a complete unit.
Check the setpoint ofpressure switches & trans-mitters and/or the calibrationof the gauges by usingonly one tool.
LEMAG-Pressotest
Can simulate dropping andraising pressure.
Checking the pressurehysteresis is no problemany longer.
The dual operating pneumaticpump is able to create eitherpressure or vacuum.
Technical details:Pump pressure range: -1 up to 40 Bar
Measuring range: -1 up to 40 BarAccuracy: 0,1 % FSNumber of gauges: 4 pieces
(-1 up to 0 Bar;0 up to 11 Bar;0 up to 25 Bar;0 up to 40 Bar)
Number of adaptors: 8 piecesIncl. set of washers, seals & flexibletestpipe
Art. No. 21900016
Since 1911MeasuringInstruments
Subject to change without notice
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
38/51
Subject to change without notice120
/07/2005/E
LEMAG
robust
precise
reliable
incl. ISO 9001 certificate
Measuring range: -1 up to 30 Bar
one hand operation
Complete with all accessories incl. ISO 9001 certificate
LEMAG
-Pressotest (digital)The pneumatic pressurecalibrator with electronicdigital gauge as a completeunit.
Check the setpoint ofpressure switches & trans-mitters and/or the calibrationof the gauges by usingonly one tool.
LEMAG
-Pressotest (digital)can simulate dropping andraising pressure.
Checking the pressurehysteresis is no problemany longer.
The dual operating pneumaticpump is able to create eitherpressure or vacuum.
Technical details:Pump pressure range: -1 up to 40 BarMeasuring range: -1 up to 30 BarAccuracy: 0,1 % FSNumber of adaptors: 8 piecesIncl. set of washers, seals & flexibletestpipe
Art. No. 21900017
Pressure CalibatorType Pressotest(digital)
Since 1911MeasuringInstruments
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
39/51
LEMAGPressotest HP
LEMAG
A sol id, easy to use pressure test system for oi l , water a nd other l iquids
The LEMAG Pressotest HP is
lightweight, easy to use and
can generate pressures up to
700 bar (1000 bar option).
It is well suited to calibration of
pressure transmitters, pressuretransducers, pressure switches
and pressure gauges.
The system offers optional
adjustable over pressure
protection, fine control and
a unique selector switch to
move from priming to high
pressure generation.
Scope of supply
Hand pump
Digital Manometer
A set of adapters
A flexible hose with fast
couplings
A robust carrying case
Subject to change without notice119
/05/2005/E
PRESSOTEST HP
Sealed construction
Up to 1000 bar
Lightweight, hand held
Optional over pressure protection system
High pressure / Priming selector
Large see-through reservoir
Compatible with many different liquids
Calibration certificate according to
ISO 9001 standard
Digital Digital Digital
manometer manometer manometer
Pressure range 0-300 bar 0-700 bar 0-1000 bar
Art. No. 21900021 21900026 21900039
The test pump and all manometers can also be ordered separately
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
40/51
DEFLECTION GAUGECRANKSHAFT
An easy to use device to measure crankshaft deflect ion
A deflection gauge for checking distortion
of crankshafts. The use of LEMAG
CONTROLmag I and II enables you to
check the bearing alignment and
deflection of the crankshaft.
The robust construction and the hardened
measuring tips make it possible to usethe instrument for all kinds of engines.
The LEMAG CONTROLmag I and II can
also be used to measure and indicate
cylinder wear. To measure cylinder wear
the hardened tips can be replaced with
rounded tips that are available as an
option.
Scope of supply
CONTROLmag I
Measuring range 60 300 mm
A set of extensions
Instrument case
Art. No. 21900002
CONTROLmag II
Measuring range 60 500 mm
A set of extensions
Instrument case
Art. No. 21900042
Optional rounded tips
Art. No. 21900008
Since 1911MeasuringInstruments
Subject to change without notice10
9/02/2005/E
CONTROLmag I & II
To check alignment and deflection on alltypes of engine
Easy adjustment of gauge
position
Compact and robust
construction
Measuring range; 60 300 mm or
60 500 mm
Ready to use package with case
Precision technology
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
41/51
7/22/2019 LEMAG Catalogue
42/51
7/22/2019 LEMAG Catalogue
43/51
MEASUREMENTMETALTHICKNESS
All models are accepted by major c lassif icat ion societ ies, including IACS
The advantages CYGNUS MULTIPLE
ECHO SYSTEM:
Single echo technology measures the time
taken for a single back wall echo to pass through
the material under test as well as the surface
coating.
MULTIPLE ECHO MEASUREMENT MEANS IN
PRACTICE:
Coatings do not have to be removed only
the metal thickness will be measured
No grinding minimum surface preparation
Measures on rough, uneven surfaces
Fast accurate reliable
Easy to use minimum operator training
Greately reduces inspection
time and cost
Since 1911MeasuringInstruments
Subject to change without notice114/05/2005/E
CYGNUS 1-250 mm measuring range
Complete ready to use kits
Choice of probes
Stable calibration Linearaccuracy No zero adjustment
Two year warranty
Includes a robust carry case
for underwater, hazardous areas, land
and see. Please, contact us for more
information
With multiple echo,
readings are taken bymeasuring the time
delay between any
three consecutive
back wall echos
which means that the
coating thickness is
completely ignored.
The gauge does not
need to be zeroed
and no re calibration
is needed at switch
on.
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
44/51
ULTRASONIC
THICKNESS GAUGE
Ultrasonic thickness gauge designed special ly for use on absorbing materials
GRP hull inspection of leisure craft andworkboats
Quality control in manufacturing of GRP andplastic products
Maintenace and safety checks on chemical and
petroleum storage tanks
Pipeline wall thickness measuring
Inspection of components
Quality assurance checks for insurancecompanies
Thickness measurements on material withpoor sound properties such as high mangane-se steel
Single echo metal thickness measurement
Measures most engineering plastics,
GRP, fiber glass and metal
Accurate and fast measurements
No false readings - repeatable
Easy to use - minimum operator training
Reduces inspection time
Including a robust carry case
2 year warranty
Subject to change without notice
CYGNUS SE
APPLICATIONS
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
45/51
115/05/2005/E
Head officeLEHMANN & MICHELS GmbH Co. KG P.O.B. 540 661 22506 Hamburg Germany
Sales & Service Center RellingenLEHMANN & MICHELS GmbH Co. KGSiemensstrae 9 25264 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
ULTRASONIC
THICKNESS GAUGE
Subject to change without notice
Rugged construction - shock proof
Environmentally sealed to IP65
Stable calibration - linear accuracy
Single crystal probe to ensure accuratemeasurements on curved back walls, with nospecific orientation of the probe required
Various probe options and settings
Displays sound velocity settings
Backlit digital display for easy viewing frombright sunlight to complete darkness
Calibrates to a known thickness or to a knownvelocity of sound
Low battery warning
Metric / Imperial switchable
SPECIFICATIONS
Material Sound velocities between 1000 m/s and9995 m/s
Range 0,9 mm - 750 mm depending on the
material under test
Accuracy 0,1 mm 0,05 mmResolution 0,1 mm
OR0,05 mm
Probes Single crystal hard faced compressionremote probe
1 Mhz, 13 mm - to use in GRP5 Mhz, 13mm or 6 mm - to use in plasticand metal thickness measuring
Power 2 x AA alkaline batteries
Display Large clear LCD with switchable backlight
Size 150mm x 33mm x 82 mm
Weight 295 gms
Ambient Temp. 0C to +50C
FEATURES
KIT CONTENTS
SE Gauge, remote hard faced probe, probe lead, acrylictest block, couplant, operation manual and carry case.
Art. No. 21904443
BS EN ISO 9002: 1994
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
46/51
THERMOMETERLASER
To measure quickly and safely al l hot, hazardous or hard-to-reach objects
LEMAG Thermometer
The LEMAG handheld non-contact thermometer is a
compact, rugged and easy-to-use device for all
temperature measurements on hot, hazardous or hard to
reach objects.
Simply aim, pull the trigger and read the temperature in
less than a second. To help aiming the instrument is
equipped with laser sighting. The laser light shows you
the area where the measurement will be made.
How it Works
Infrared thermometers measure
the surface temperature of
objects. The units optics sense
emitted, reflected and transmit-
ted energy, which are collected
and focused onto a detector.
The units electronics translate
the information into a tempe-
rature reading which is
displayed on the unit. The laser is
used only for aiming purposes.
Since 1911MeasuringInstruments
Subject to change without notice127
/05/2005/E
Laser sighting
Temperature range-32 C to +400 C
(optional to +600 C)
Accurate and fast
Durable, ergonomic construction
Compact, easy to use
Other ranges also available
LEMAG non-contact thermometer
Temperature -32 C to 400 C -32 C to 600 C
range
Article 21900214 21900215
number
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
47/51
THERMOMETERLASER
To measure al l hot, hazardous or hard-to-reach objects quickly and safely
LEMAG MS Laser Thermometer
Infrared thermometers measure the object surface
temperature without touching it. They determine
the temperature on the basis of the emitted
infrared radiation from an object.
Because of the ability to measure the surface
temperature without touching it, these thermome-
ters enable the user to detect the temperature of
inaccessible of moving objects without difficulties.
The LEMAG MS infrared thermometer can follow
you wherever you are as it is lightweight and fits
easily into your shirt pocket.
Infrared thermometers combine a convenient
operation with precise measurement and an
informative display. They can be used in ambient
temperatures ranging from 0 up to 50 C. Laser
sighting helps to aim at objects.
Since 1911MeasuringInstruments
Subject to change without notice155
/10/2005/E
Laser sighting
Temperature range-32 C to +420 C
(optional to +530 C)
Accurate and fast
Backlit display
Compact, easy to use
Other ranges also available
LEMAG MS non-contact thermometer
Temperature-32 C to 420 C -32 C to 530 C
range
Article21900228 21900229
number
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
MS 40 MS 60
Various measurements functions like minimum
and maximum value, hold function, high
and low alarm provide you with all necessary
information on a three line backlit display.
7/22/2019 LEMAG Catalogue
48/51
Head office
LEHMANN & MICHELS GmbH & Co. KG P.O.B. 540 661 22506 Hamburg GermanySales & Service Center Rellingen
LEHMANN & MICHELS GmbH & Co. KGSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
FUELmag
200
Developed according to Danish Marit ime Authority technical guidance
Fuel valve testing at test bench
The indication of correct or incorrectatomizing can be clearly seen in thetransparent Perspex container.
Since 1911MeasuringInstruments
Subject to change without notice129/01/2003/E
Aerosol suction devicefor fuel injectiontest benches For collection of oil mist and other aerosols
relesed when testing fuel injection valves
Works as a closed unit
Eliminates the use of ships ventilation system
Developed for use on vessels and on shore
testing areas
Ready to use package
This device is developed foruse at test benches tocollect all aerosolsproduced when testing fuelinjection valves on shoreand onboard vessels. Itreplaces the connection tothe ships existing
ventilation system. Thedevice functions as aclosed unit, and uses re-circulation of the air. Oilaerosols are effectivelysucked out in thetransparent acrylic
container by using avacuum. The aerosolsare saturated andcollected for draining andrecycling in the filter.
Scope of supply
Aerosol suction device Filter with ejector
Assembly kit with fittings &
hoses
Container and fixture plate
Cover plate
Ready to use package
Art. No. 30002020
FUELmag/01/2003 E 12.03.2004 14:46 Uhr Seite 1
7/22/2019 LEMAG Catalogue
49/51
Subject to change without notice122
/05/2005/E
LEMAG
robust
precise reliable
very short delivery time
custom made
stainless steel
capilary extension possible
housing glycerin filed
glycerin / silicon filled housing
All types are manufactured acc. to customers requirements (type of scale, threads etc.) with shortest delivery
LEMAG-Dial Type
Thermometer & Exhaust-Gas Pyrometer are availa-ble with capillary exten-sions or fixed stem. Veryshort time of delivery isguaranted even if typeof instrument is non stan-dard.
Please advise on thefollowing when placing anorder:
range of temperature type of scale length of stem diameter of stem size of thread case diameter special requirements
Range of temperatureavailable:-200 C up to 800 C(-328 F up to 1472 F)
Dial Type ThermometerExhaust Gas Pyrometer
Since 1911MeasuringInstruments
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
7/22/2019 LEMAG Catalogue
50/51
Sales & Service Center RellingenLEHMANN & MICHELS GmbHSiemensstrae 9 25462 Rellingen GermanyTel. +49 4101 5880 0 Fax +49 4101 5880 129 www.lemag.de [email protected]
PLANIMETER
For accurate measurement of indicator p/v diagrams
Planimeters types PT1 and PT2 are perfect
tools for accurate measurement of
indicator diagrams by simply tracing the
lens along the diagram.
You only need to set the centre of the
tracing lens on the engines P/V diagram
and trace it along the curve.
After completing that you can easily
calculate the indicated power.
The Planimeters are delivered in solid
instrument cases to ensure safe handling
and maintain
accuracy.
Planimeter Type PT1 Mechanical
For metric system
For measuring areas at different scales
with a fixed value of the vernier unit of
0,1 cm2
Working area up to 50 cm x 50 cm or
70 cm diameter circle
Art. No. 21960001
Planimeter Type PT2
Mechanical
For metric and imperial system For measuring areas at different scales
with a variable value of the vernier unit
of 0,1cm2 or 0,05 cm2 for small areas Working area up to 70 cm x 70 cm or
100 cm diameter circle
Art. No. 21960002
Since 1911MeasuringInstruments
Subject to change without notice105
/07/2005/E
Type PT1 & PT2 Available as metric or imperial
Available as mechanical or digital
Accurate
Delivered in an instrumentcase
Ready to use package
German precision technology
7/22/2019 LEMAG Catalogue
51/51
ACTUmagPressure connectionfor Indicator Cocks
ACTUmag
Threaded connections withHexagon nut SW 32
Threaded connections withSteel-crutch-nut
Scaled steel cone, 330(Standard for Indicator Cocks)
Inside thread G 1/4
Special inside thread forexample M 14 x 1 forPiezo electric sensor
Ball valve G 1/410 bar, brass-cromium plated
Compress. air connection 12 mm
max. Pressure PN in bar
Order No.:
incl. incl.
incl. incl.
10 10 250 250 250 250
2607 8322 2607 8323 2607 8324 2607 8325 2607 8326 2607 8327
Type A B C D E F
Keylegend: yes no
Your support service:
since 1911measuring
instruments