MAGNETICS - Peacocke & Simpson - for mineral...

� �30 Innes Road (Cnr Graniet Rd), Jet Park Ext. 66, Boksburg, �� 30089 Jet Park 1469

��+27 11 444 9160 - �+27 11 444 9166 ��:[email protected] - Web site:http://www.eriez.com

Sample Preparation Equipment

MAGNETICS

SOUTH AFRICA (PTY) LTD INCORPORATING MACSA / MACSALAB

MAGNETICS

Jaw Crusher

Crushing

• Jaw Crushers

• Rolls Crushers

Laboratory Pulveriser

Milling

• Lab Mills • Impact Hammer Mills • Industrial Hammer Mills • Top Discharge Hammer

Mills

Pot Barrel Mill (Swing) Mill

Fine Grinding

• Pot Barrel Mills / Disc Mills

• Ball / Rod Mills

• Vertical Disc Pulverisers

Finger Crusher

Disintegrating / Lump Breaking

• Finger Crushers • Lump Breakers

Cascade Splitter

Splitting / Sampling / Dividing

• Cascade Splitters

• Micro Splitters

• Jones Rifflers • Tube Dividers

Sieve Shaker

Screening / Particle Size Analysis

• 200mm dia. Sieve Shakers



• Test Sieves

Vee Blender

Blending / Mixing

• Drum Mixers

• Tumble Mixers

• Cone Blenders • Vee Blenders

Filter Press

Filtering / Dewatering

• Filter Presses

Marcy Scale

SG / Pulp Density Determination

• Marcy Scales & Buckets

Magna Chute

Magnetic Separation

• Magna Chutes

• Tailings Test Magnets

CONTENTS

MACSALAB JAW CRUSHERS

MACSALAB ROLLS CRUSHERS

MACSALAB 200 CROSS BEATER LAB MILLS (PULVERISERS)

MACSA 300 OVERHUNG HAMMER MILLS (DISINTEGRATORS)

Inlet Size: Max Feed Size: Adjustable Discharge Opening:

60 x 100 60 x 100 mm 45 mm 3 - 10 mm

100 x 150 100 x 150 mm 80 mm 10 -30 mm

150 x 250 150 x 250 mm 125 mm 10 - 40 mm

250 x 400 250 x 400 mm 210 mm 20 - 60 mm

Model Roll Size

Dia. x Width

Capacity* Weights (kg) Overall Size (mm)

L W H

‘O’ 300 x 200 Max feed 10mm 4:1 reduction 700 1500 700 900

‘I’ 400 x 200 Max feed 20mm 4:1 reduction 750 1550 630 910

The range of MACSALAB Jaw Crushers is ideal for primary crushing of samples of moderately hard materials for example: • Coal • Limestone • Ore • Minerals • Bricks & Rubble Units are sturdily constructed in Cast Iron and utilise reversible hardwearing Manganese Steel jaws. Units are simple to operate and easy to maintain. Larger sizes are available on request.

Unit available to test your product at our Jet Park test facility

MACSALAB Rolls Crushers are designed for secondary reduction after jaw crushing. These smooth roll crushers will rapidly reduce coal, ore and hard rock from a maximum feed size of 20mm to fine sand. Ruggedly constructed & easy to operate. Breakage of material is by nipping action with minimal fines generated. Fluted rolls are also available for both units.


The 200 Cross Beater Lab Mill is used for crushing: - Coal - Chemicals - Spices - Bricks - Soil - Grain - Ores & Minerals - Concrete and many more materials in the medium hard range. Once the material is fed into the feed chute, it quickly flows into the mill grinding chamber where it is pulverised against the chamber lining by impact with the fast moving hardened hammers. Once the particles reach the required size they are discharged through interchangeable screens into the collection bag or receptacle.


The MACSA 300 Overhung Hammermill (Disintegrator Mills) have been introduced to satisfy the needs of laboratories, research institutions and industry requiring size reduction on a semi production scale. The standard unit is powered by a 4kW drive with a 380/525 Volt motor. MACSA 300 Overhung Hammermills have been successfully installed in the following industries: • Coal • Minerals & Ore • Sugar • Food • Chemicals • Friable Grain

TECHNICAL SPECIFICATIONS

Rotor diameter: 300mm

Rotor speed: 450 rpm nom

Inlet feed size of machine: 120mm x 76mm

Feed hopper: 12 litre capacity

Discharge: Cloth bag or 50 litre drum

MILLING

CRUSHING

MACSA IMPACT HAMMER MILLS

MACSA INDUSTRIAL HAMMER MILLS

MACSA TOP DISCHARGE HAMMER MILLS also available

MODEL MOTOR SIZE (kW) OVERALL SIZE (mm) (± W x L x H) MASS (± kg)

300 x 300 7.5 600 x 1700 x 700 500

Standard 18.5 / 22 / 30 / 37 800 x 2300 x 1180 1650

Hi-Cap 37 / 55 / 75 1000 x 2500 x 1550 2750

MODEL INLET

THROAT

MOTOR SIZE (kW) CAPACITY MAIZE (TPH) (4mm screen) SIZE (mm) ± W x L x H MASS (kg)

450 460 x 300 30 / 37 / 55 9.6 2600 x 1300 x 1480 790

600 610 x 330 55 / 90 18 2700 x 1300 x 1485 800

900 930 x 330 90 / 132 26 2700 x 1300 x 1485 870

MACSA Impact Hammer Mills are specially designed and fabricated for the reduction of medium to hard friable materials. Machines can be designed & manufactured with different combinations of hammers, screens, motors & housings to suit your specific application and requirements. Test work can be conducted on your product sample at our on-site facility. Test work is used to select and size appropriate machines and can include through-put tests, milling tests and particle size distribution analysis. Final product size is defined by product, feed rate, fixed rotor speed and screen size. The dynamically balanced rotors can be fitted with the following beater configurations:

• Three replaceable hard-faced swing beaters mounted on swinger plates

• Multiple replaceable hard-faced swing hammers mounted on three separate beater pins The mill housing is fully lined with replaceable liner plates.

MACSA Impact Hammer Mills are available in several sizes and have been successfully installed in the following industries:

• Coal • Fertilizer • Abattoir by-products

• Hard Chemicals • Minerals & Ore • Hard rubber / plastics

• Lime • Brick & Tiles • Friable grains

• Quarries • Wood chips • Particle board

The MACSA Industrial Hammer Mills are robustly constructed for use with animal feed, abattoirs, chemical plants or for processing of waste products. It is normally used with 6mm thick hammers. The top housing can be supplied with liners or cutting plates for fine grinding. Bases are available for either gravity or suction pneumatic discharge. Suction pneumatics are recommended for product size of 3mm or less. Rotors are dynamically balanced and can run at 1450 to 3000 RPM. The MACSA Industrial Hammer Mills feature easily removable beater pins and screens.

MACSALAB SINGLE POT BARREL MILLS SIX POT BARREL MILLS

MACSALAB ROD & BALL MILLS COMPLETE WITH DRIVE ROLLS

MACSALAB VERTICAL DISC PULVERISERS also available

MODEL INLET/OUTLET (mm) ±

9 x 9 230 x 230

12 x 9 300 x 230

18 x 12 460 x 300

21 x 12 530 x 300

24 x 12 610 x 300 27 x 12 686 x 300

30 x 12 762 x 300

39 x 12 990 x 300

MODEL WEIGHT (± kg) DIMENSIONS (± mm L x W x H)

1614-B 290 1120 x 840 x 490

2214-B 350 1200 x 910 x 490

2615-B 400 1250 x 1060 x 490

3414-B 550 1360 x 1250 x 700

3636-D 1370 2190 x 1582 x 730

4048-D 2450 2200 x 1600 x 800

5048-D 3200 2300 x 1600 x 810

Variously known as a Barrel Mill, a Swing-Mill, a Ring Mill or a Stone & Disc Mill, this highly efficient grinding machine comprises a steel vessel containing a solid steel bar (stone) and one or two steel rings which oscillate with a rotary motion to grind materials from approximately 10mm lumps down to powders finer than 50 microns. A particular feature of the MACSALAB Barrel Mill is that operation is dust free and, due to its ease of cleaning, the ground product can be fully recovered.

The 100cc & 250cc vessels are quickly and securely clamped to the machine by means of cam-action levers and swing-arms, and the oscillating motion is imparted to the vessels by mean s of a specially designed out-of-balance drive mechanism The unit is supplied with a sound-proof cabinet, which also contains a motor starter and timer.

A Six-pot Barrel Mill utilizing 6 x 100cc grinding vessels is also available.

MACSA LUMP BREAKERS The MACSA Lumpbreaker is a single- or double rotor crusher designed and manufactured in various sizes with replaceable grid screens. Lumpbreakers are used for general crushing and fragmenting of compact materials and are also ideal for easily breaking up lumpy and caked materials.


Unit available to test your product at our Jet Park test facility Applications:

• Wax • Candy Bars • Caustic Soda • Dry Sludge • Ammonium Nitrate • Salt • Charcoal • Dry Prills • Detergents • Yeast Flakes • Magnesium Chlorite • Sugar • Soya Bean Meal • Flaked Resins

MACSA FINGER CRUSHERS MACSA Finger Crushers are of the double rotor type designed for breaking lumps of moderately hard materials, especially those tending to agglomerate in storage. Stainless Steel models are also available for food handling. Unit can be supplied with hardened wear parts when crushing harder, abrasive materials. Various sizes are available.

Grinding vessels can be supplied in Chrome Steel or Carbon Steel as standard, with Tungsten Carbide vessels being available on special order.

MACSALAB Rod / Ball Mill Vessels are available in 304 & 316 Stainless Steel, Rubber-liner Mild Steel as well as Ceramic (Alumina). Rods are available in Stainless Steel and Arlicite. Grinding Spheres (balls) are available in Zirconia, Alumina and Arlicite. Quantity and sizes to clients’ specifications. MACSALAB Drive Rolls for Rod / Ball Mills are rubber coated and manufactured in Double Roll models. The rolls are 120mm diameter x 1200mm long and powered by a 0.37 kW 220 V motor with variable speed controller.

SIZES: Rod / Ball Mills are available in 5, 7, 10, 15, 20 & 30 litre capacities.

Applications:

• Bulk or bagged chemicals • Fertilizer

• Expeller or filter cake • Glass Bottles • Friable plastics • Charcoal • Coal lumps

GRINDING TO ANALYTICAL FINENESS

DISINTEGRATING AND LUMP BREAKING

*Capacity given as guide ** other sizes also available

MACSA

Single Rotor

Lump Breakers**

MACSA

Double Rotor

Lump

Breakers**

MACSA

Double Rotor Finger Crushers**

Model

9 x 9

Model

9 x 12

Model

24 x 12

Model

27 x 12

Working

principle

Crushing Crushing Crushing Crushing Crushing Crushing

Material

Type

Lumps, granules, or flakes of moderately hard material

Lumps, granules or flakes of moderately hard material





Maximum

throughput

/hr*

2-6tph Depending on Application

16-20 tph Depending on Application

1 to 2tph Depending on Application

1 to 5tph Depending on Application



Sample

Volume

Continuous/ Controlled






Screen

Aperture

Size

1,2,3,4,5,6,8,10, 12, 24,25 or 48mm gaps or no screen



1,2,3,4,5,6,,8,10, 12, 24,25 or 48mm gaps or no screen


1,2,3,4,5,6,8,10, 12, 24,25 or 48mm gaps Or no screen

Minimum

Final

Particle Size

Defined by choice of screen






Grinding

parts

Material

Carbon Steel, Stainless Steel and Tungsten Carbide Coated






Applications

Ammonium Nitrate, Blood Meal, Candy Bars, Carbon Black, Caustic Soda, Charcoal, Chocolates, Detergents, Dry Sludge, Dry Prills, Filter Cake, Flaked Resins, Granola Bars, Magnesium Chloride, Milk Powder, Noodles, Pharmaceuticals, Plastics, Salt, Soap, Spices, Sugar, Various Chemicals, Vials, Yeast Flakes etc.






MACSA/MACSALAB SIZE REDUCTION EQUIPMENT REFERENCE TABLES

MACSA

300 Overhung

Hammer Mills

MACSA

300X300

Impact

Hammer Mills

MACSA Standard

Impact Hammer

Mills

MACSA

Hi Cap Impact

Hammer Mills

MACSA

Industrial

Hammer Mills

Working principle

Impact/grinding Impact/grinding Impact/grinding Impact/grinding Impact/grinding

Material Type

Hard, Medium hard, Soft, Friable

Hard, Medium Hard, Soft, Friable



Medium Hard, Soft, Friable

Maximum Feed

Size

~20mm ~75mm ~100mm ~150mm ~25mm

Maximum

throughput/hr

120kg/hr (gold ore) Depending on

Application

½-3tph Depending on

Application

1-20tph Depending on

Application

5-50tph Depending on

Application

9,6; 18; 26 tph (Maize)

Depending on Application

Sample Volume

Batch feeding (50 Litre collection drum) /

Controlled


Continuous /

Controlled


Continuous /Controlled

Screen Aperture

Size

0.5-5mm (1.5, 3, 4,6,8,10,15 and 20mm)

4,6,8,10,15 and 20,25mm

4,6,8,10,15 and 20,25mm

2.5,3,12,19mm

Minimum Final

Particle Size

Defined by rotor speed and choices of screen

Defined by rotor speed and choices

of screen

Defined by rotor speed and choices of

screen

Defined by rotor speed and choices of screen

Defined by rotor speed and choices of

screen

Grinding parts

Material






Applications

Maize Meal, corn starch, nickel/ copper ore, gold containing ore, cobalt carbonate,

Coal, hard chemicals, Lime, Quarries, Fertilizers, Mineral Ores, slag material, calcite, Bricks, Dry wood chips, abattoir by-products, Hard rubber, friable grain, gypsum boards



Animal feed, saw dust, chips, abattoir, chemical plants, waste products processing, food industry.

MACSALAB

Jaw Crushers

MACSALAB

Rolls Crushers

MACSALAB 200

Cross Beater Lab

Mills

MACSALAB Pot

Barrel Mills

MACSALAB Rod &

Ball Mills c/w

Drive Rolls

Working principle

Crushing Crushing Impact / Grinding Crushing Milling

Material Type Hard, Medium Hard, Hard, Medium hard, friable

Hard, Medium Hard, Soft

Medium Hard, Brittle, Soft

Medium Hard Brittle, soft

Maximum Feed

Size

+/-210mm +/-20mm (‘I’) +/-10mm (‘0’)

+/- 12mm +/-12mm +/-50mm

Maximum

throughput/hr

5-15tph +/-2 tph Batch wise Batch wise Batch wise

Sample Volume

Continuous Controlled Feed

5 Litre collection bag 250/100ml 5/7/10/15/30 litres

Screen Aperture

Size

No screen No screen 350um-3mm No screen No screen

Minimum Final

Particle Size

+/-3mm <500micron <300micron <50micron <50micron

Grinding parts

Material

Manganese Jaws Hardened Carbon Steel

High Wear Resistant Fabrication

Chrome Steel, Carbon Steel Tungsten carbide

Rubber-lined Carbon steel, 304/316 Stainless steel vessel. Alumina balls and stainless Steel rods

Applications

Coal, limestone, minerals, brick, concrete, rubble, ores, glass, etc

Secondary reduction After Jaw crusher for ores, coal, hard rock, etc

Bench top lab unit for Coal, bricks, ores & minerals, soil, glass, concrete, spices, grain, chemicals, etc

Grinding to analytical fineness of ores, soil, grain, plant material, etc

Grinding to analytical fineness of Gold, lead, zinc, silver, nickel, alumina ore, etc

MACSALAB 6, 8 & 10 WAY CASCADE SPLITTERS

MACSALAB 8 & 16 WAY MICRO SPLITTERS MACSALAB 12 WAY SLURRY SPLITTERS also available

MACSALAB JONES RIFFLERS (SAMPLE SPLITTERS)

MACSALAB ROTARY TUBE DIVIDERS also available

MACSALAB SIEVE SHAKERS

MACSALAB DRUM MIXERS

MACSALAB Cascade Splitters are widely used in mining laboratories and refineries for free flowing material. The Cascade Splitter comprises a Stainless Steel feed hopper (i.e. 20, 10 or 5 litre capacity to client’s choice), vibrating feeder with variable speed control, Steel sample cutter and Stainless Steel 1 litre collection cups, as standard. Material contact parts are of Stainless Steel to ensure a smooth flow of material with no hang-ups and minimum sample segregation. Vibrating feeder provides an accurately controlled feed rate from zero to maximum setting and the dividing spider ensures precise separation from cup to cup with no spillage. The carrier table rotates at a constant speed and is provided with a slip clutch for operator safety. The base is of powder coated Carbon Steel. Specially designed units with larger hoppers & collection cups as well as different amounts of cups can be supplied on request.

For use in laboratories needing to split small samples. MACSALAB Micro Splitter comprises a 500ml hopper, vibratory feeder tray and 8-way or 16-way rotary Aluminium sample cutter using thick wall glass tubes, 50ml capacity. The Mild Steel base of the unit is powder coated. Feed rate and rotational speed are both adjustable to suit the product being sampled.

The MACSALAB ranges of low cost manual Rifflers (Jones Type) are easy to operate and designed for use in general laboratory work for bulk material. Rifflers are constructed from Mild Steel and are supplied with a stand and 3 collection bins as standard. Select unit with slot width at least 3 times maximum particle size. Variations are also made to order and include special materials like Stainless Steel and multiple stack units.

MACSALAB ES-200 ELECTROMAGNETIC SHAKERS The unit is designed to handle 200 mm diameter test sieves (8 full height or 16 half height) plus the necessary lid and receiver. Features include quick release knobs, variable amplitude, intermittent or continuous operation facilities and a 0-99 minute push button timer. A wet washing kit is also available including a lid fitted with a spray nozzle, wet washing receiver and rubber ‘o’ rings. MACSALAB MS-300 MECHANICAL SHAKERS Able to handle 200 mm & 300 mm diameter test sieves. This unit employs a unique shaking action. The intermittent rotary action, combined with vertical movement and angular mounting, imparts a rotary as well as a rolling action to particles. The bottom knock helps clear the screen and lifts the particles, especially on the finer screens.

MACSALAB MS-450 GYRATORY SIEVE SHAKERS Able to handle 300 mm & 450 mm diameter test sieves. The unit is driven by a vertically mounted off-balance electric motor, which has eccentric weights attached to the motor shaft-end. The position of the weight can be adjusted to accelerate the sieving action. An extensive range of SABS approved 200, 300 & 450 mm diameter Test Sieves are available with various wire mesh & square hole perforated plate apertures.

MS-450 ES-200 MS-300 Test Sieve

SCREENING AND PARTICLE SIZE ANALYSIS

SPLITTING, SAMPLING AND DIVIDING

MACSALAB CONE BLENDERS MACSALAB VEE BLENDERS Bigger sizes available on request

MACSALAB TUMBLE MIXERS also available

MACSALAB FILTER PRESSES

MODEL WORKING CAP (L)

MOTOR (kW)

SPEED (RPM)

OVERALL DIMENSION (MM)

H W L

V 10 10 0.18 36 1050 400 1200

V 20 20 0.37 30 1200 450 1400 V 40 40 0.75 26 1400 550 1700

The MACSALAB Drum Mixer has been developed to meet increasing demand for a low cost batch mixer for homogenising, dyeing, etc., particularly in smaller industries or for frequent product changes as required. Advantages of a drum mixer compared to a conventional mixer are:-

• Avoids undue handling of dusty or tonic products

• Hoop can be used for transporting drum

• Accepts 100 and 220 litre drums

• Very little physical effort is required to change drum

• No need for drum hoists, cradles, etc.

• No time or materials lost when changing products

MACSALAB Cone Blenders are designed for gentle mixing of dry, powdered and granular materials, specifically where cones are loaded and discharged after mixing at various locations within the manufacturing plant. Cones can be lifted from the drive unit and transported on specially designed trolleys to and from the blender unit. The unit is also useful for product storage. Applications: Pharmaceutical, Food, Chemical, Ceramic Industries, PGM Refineries & Sampling Systems Features: • Minimal cleaning time – each unit may be repeatedly used for same product. • Available in 100, 200, 350, 500 and 750 litre units.

MACSALAB Vee Blenders have been designed with the laboratory environment in mind. The Vee-shaped mixing chamber is of grade 304 Stainless Steel. Supports and stand is of Mild Steel. Mixing chamber can also be supported between two Mild Steel cabinets finished in high-gloss enamel. The drive and electrical equipment are totally inclosed in the cabinets, presenting a neat, easy to clean appearance.

The Filter Presses comprise a fabricated steel base and yoke with a Grade 304 Stainless Steel vessel as standard. Vessels of Grade 316 Stainless Steel are available on special order. A quick release air coupling is supplied as standard as is a filling / pressure release valve. MACSALAB Filter Presses are extensively used in mining and metallurgical laboratories for dewatering slurries, separating solids from liquids, etc. In operation the sample is placed in the vessel, the lid clamped shut and compressed air applied at approximately 600 kPa. The liquid drains through a discharge nozzle in the base of the vessel, leaving the dry solid inside. Variations include: 1) Stands for single or multiple Filter Presses, with or without piping etc. 2) Swivel stands with larger sizes utilizing worm-gear operated gearboxes for easy discharge Available sizes are 1.0, 2.4, 5.5, 9.7, 15.2, and 21.9 litres but Special designs can also be manufactured to customers’ requirements.

Drum mixers find applications in the following industries: - Minerals, Chemicals, Plastics, Pharmaceuticals, Paints, Pigments, Cosmetics, Clothing, Leather, Food stuffs, etc.

The MACSALAB Drum Mixer comprises a drive unit with roll-on/roll-off ramp and foot switch or timer. The hoop cradle can be specially modified to accept the clients drum

BLENDING AND MIXING

FILTERING AND DEWATERING

MACSALAB MARCY

® PULP DENSITY & SPECIFIC GRAVITY SCALES

ERIEZ MAGNA CHUTES (MAGNETIC SEPARATION)

ERIEZ TAILINGS TEST MAGNETS (MAGNETIC SEPARATION)

APPLICATIONS

Use Marcy® Scales to obtain the following direct readings:

1) Weight of sample in grams or kilograms

2) Specific gravity of liquid or pulp

3) Percentage solids contained in the pulp of any given specific gravity

4) Specific gravity of dry solids

SPECIFICATIONS

Complete scale and 12 off interchangeable dial faces (outside diameter of scale 10”)

Easy to follow calibration instructions are also provided in the operating manual.

1 Litre Capacity Flasks in Aluminium, Acrylic, Stainless Steel & Polyurethane sold separately

Eriez Magnetic Hand Test Samplers are manufactured in Stainless Steel. A sliding magnet permits quick and easy separation for laboratory as well as on-plant tests. Units are available with the following magnets:

• BaFe

• R.E. INSTRUCTIONS

• With magnet fully inserted in housing, place end in tailings stream for ± 10 seconds

• Remove unit and examine magnetic particles adhering to the unit.

• Extract plunger to remove magnetic particles.

SG AND PULP DENSITY DETERMINATION

MAGNETIC SEPARATION

FEATURES

-Greater Sensitivity

-Solid Construction

-Accuracy

-Ease of Operation

-Compatibility

The Eriez Magna Chute is used for the determination of Magnetite or Ferro-Silicon losses in Wet Drum Separator Tailings. Units are available with the following magnets:

• BaFe

• R.E. INSTRUCTIONS

• Pour 1 litre of W.D.S. Tailings over the tray when flat and in contact with the magnet.

• Carefully wash off Coal / Non-Mags that become entrapped in Mags (magnetic particles)

• Raise tray to upper position away from magnet

• Wash off Mags

• Collect, dry and weigh Mags

Optional extras for the unit include Adjustable Stainless Steel Feed Hoppers (as shown in picture)

Beaters, Hammers, Rolls ERIEZ Beaters hammers and rolls for several different makes of mills. Different materials and designs to suite client’s requirements. Screens ERIEZ manufactures mill screens fabricated from wedge wire, perforated or conidure plate. Screens are available in many different materials and aperture sizes. Rotors ERIEZ manufactures new rotors and beater pins using high tensile steel shafts and fully balanced rotor plates for several different makes of mills. Other Spares A wide variety of spare parts are available for our product range as well as refurbishment / repair of our equipment in our workshop.

SPARES AND REFURBISHING

MACSA / MACSALAB EQUIPMENT A - Z

BALANCES MAGNA-CHUTES SAMPLE SHAKERS

BALL MILLS MAGNETIC SEPARATORS SAMPLE SPLITTERS

BELT CLEANERS - ROTARY BRUSH MAGNETIC STIRRERS SAMPLING SYSTEMS

BLENDERS MARCY PULP DENSITY SCALES SAMPLE RIFFLERS

CONDUCTIVITY METER MICRO SPLITTERS SCALES

CONE BLENDERS MILLS SCREENS

CONE CRUSHERS MIXERS SHAKERS

CRUSHERS MOISTURE METERS SIEVES

DAVIS TUBE TESTER MUFFLE FURNACES SPLITTERS

DIGITAL THERMOMETERS OVENS SWING MILLS

DISINTEGRATOR MILLS PARTICLE SIZING TACHOMETERS

DIVIDERS pH METERS TAILINGS TEST MAGNETS

DRUM MIXERS PILOT PLANT EQUIPMENT TEMPERATURE PROBES

DRYING TRAYS PLATFORM SCALES THERMOMETERS

FILTER PRESSES POT BARREL MILLS - SINGLE & SIX POT TROLLEYS

FINE GRINDING SYSTEMS PRESSURE FILTERS TUMBLE MIXERS

FINGER CRUSHERS PULP DENSITY SCALES ULTRASONIC CLEANERS / BATHS

FLOTATION MACHINES PULVERIZERS VACUUM PUMPS

FORCED CIRCULATION OVENS RIFFLER SAMPLE SPLITTERS VACUUM FILTERS

FURNACES RING MILLS VEE BLENDERS

GRINDING VESSELS RING & STONE MILLS VIBRATING DISCS MILLS

HAMMERMILLS ROD MILLS VIBRATORY FEEDERS

HOTPLATES ROLLER MILLS VISCOMETERS

IMPACT HAMMERMILLS ROLLS CRUSHERS WATERBATHS

INCUBATORS ROTARY CASCADE SPLITTERS WATERSTILLS

JAW CRUSHERS ROTARY TUBE DIVIDERS WET WASHING SIEVES

LAB MILLS ROTARY BELT CLEANERS WET WASHING SHAKERS

LABORATORY INSTRUMENTS SAMPLE DIVIDERS

LUMP BREAKERS SAMPLE PREPARATION EQUIPMENT

ERIEZ MAGNETICS the “world authority" in advanced

technology for magnetic, vibratory and metal detection applications.

MACSA /MACSALAB

Macsa/Macsalab was formed in 1980 and is, since 1989, an incorporation of

Eriez Magnetics (South Africa) (Pty) Limited. It specializes in design, fabrication

and manufacture of process plant and laboratory equipment for the mining,

chemical, food, pharmaceutical, recycling, agriculture and animal feed

industries.

It offers size reduction, screening, splitting/sampling, mixing/blending and

testing/measuring equipment to the mining, metallurgical, recycling, chemical,

food and agricultural industries. We design, manufacture and supply Jaw

crushers, Hammer mills, Pulverizers, Rolls crushers, Ball/Rod mills, Lump

breakers/Finger crushers, Test Sieves and Sieve shakers, Drum/Tumble

mixers, Cone/V-blenders, Filter presses, SG/ Pulp density scales, Magnetic

separators (Tailings test magnets, Magna chutes, Drum/Roll separators) and

Davis tube tester. We also have an in-house testing facility and selected

equipment available on a free loan basis for demonstration purposes.

Complimentary equipment is sourced from reputable suppliers locally and

abroad.

All Macsa/Macsalab equipment carries a 12 months warranty.

CONTACT DETAILS: TEL: +27 11 444 9160 FAX: +27 11 444 9166

30 INNES RD (CNR GRANIET RD) JET PARK EXT 66, BOKSBURG,

JOHANNESBURG Website: www.eriez.com

Email: [email protected]

Date post:	09-Apr-2018
Category:	Documents
Upload:	ngoduong
View:	215 times
Download:	2 times

MAGNETICS - Peacocke & Simpson - for mineral...

Documents