VIGILANT - DUAL MEDICAL TOURNIQUET CONTROL PANEL

Operating Theatre Specialists introduce the new MGTQCP

www.escoindustries.com.au

®

ESCO Medicon MGSTCPFL - Medical Surgical Tool Air Control Panel designed to compliment the Alphamax MSP system, or Sigma Pendants

and match perfectly the Tourniquet Control Panel

MGSTCPFLESCO Sigma Medical Pendants

Medicon Vigilant - Dual Tourniquet Control PanelTo view our complete range - download a copy of our latest Catalogue or visit our website - www.escomedicon.com.au

The MGTQCP Dual Tourniquet Monitor is designed to set tourniquet pressure

applied to two independent tourniquet systems, then monitor the pressures and sound an alarm should the pressures rise or fall outside preset limits

Minute timers are also run for each system with an audible reminder every15 minutes of operation

The audio system of the MGTQCP uses four different combinations of beeps and mixed frequency tones to indicate various events. The four combinations are:- 1 beep, 2 beeps, 3 beeps and a continuous

triple mixed frequency signal as the alarm sounds

The alarm condition has both an audible and visual componentwhile the 15 minute reminder has an audible component only

Both audible alarms share a common sound systemThe volume of the alarms can be set to 1 of 8 levels

(this is done internally at the time of installation)

The Dual Tourniquet Monitor displays pressure in kPaSelection is done internally and is set at the time of installation

A green LED’s on the front panel indicates kPa has been selected

All timing is done via a “realtime clock” that runs even when the unit is turned OFF. When the unit is off, the clock is powered by an

internal battery. This battery is constantly monitored when the unit is powered up and a red LED is provided on the front panel to indicate

when the battery is considered too low to function properlyAt this point the battery requires replacing

The MGTQCP Tourniquet Control Panel can also be used to regulate remote mounted

Tourniquet outlets CUFF A (MGOTQA), CUFF B (MGOTQB) or both, remote outlets are typically installed on Services Pendants (booms) for ease of use of Patient Cuffs

at the operating site and assists in removing draping Air supply lines through the operating field (remote piping to pendants by others during installation)

Other products in the Medicon range of Surgical Control Panels include the Surgical Tool Air Control MGSTCPFL and the MGSTCPFL-P (for remote outlet control)

ESCO - MGTQCP Tourniquet Control Panel

escomedTCP01.v1

Medicon - Medical Gas - Terminal Units, Hoses and FittingsAlso available in Panel Mount or Pendant Appllications

i n d u s t r i e s

PMS 314 Uncoated

PMS 7468 (C=100 M=10 Y=0 K=28)

PMS 187

PMS 430 �(support colour if required)

PMS 314 Uncoated

PMS 7468 (C=100 M=10 Y=0 K=28)

PMS 187

PMS 430 �(support colour if required)

medicon medical systems

m e d i c o n

m e d i c o n

m e d i c o n

m e d i c o n

m e d i c o n

1. Esco Industries Logo

2. Esco Medicon Medical Systems Logo

3. Esco Typeface

4. Esco Acceptable Logo Usage

5. Esco 'Web Safe' Colours

Eurostile Medium Eurostile Demi Eurostile Bold

i n d u s t r i e s

i n d u s t r i e s

i n d u s t r i e s i n d u s t r i e s

i n d u s t r i e s

White�

50% Black�

100% Black

The ESCO logo should be allowed space from other graphic elements or page edges.This space should be no less than the height of the inside of the 'C'.

50% Black�

White

PMS 430

xx x

P#006699 #990033 #999999 (support colour if required)

6. Esco Logo File Usage

3 files are available for reproduction, these can be used as follows:.eps - use this file to supply to printers (high resolution, works at any size)�.jpeg - use this file for low resolution in-house prints (eg: For Powerpoint or Word)�.gif - use this for web and email (eg: to supply as a logo to be placed on a website)

Vigilant Tourniquet Control Panel

HEAD OFFICEUnit 37, Slough Business Park Holker Street, SilverwaterNSW 2128, Australia E: customer.service@escoindustries.com.au www.escoindustries.com.au

THE ESCO GROUP OF COMPANIES

T: 1300 879 363 F: 1300 879 364

MEDICON MEDICAL SYSTEMS

available in any configuration or style to suitESCO Medicon has a full offer of gas fittings designed for performance

under strict conditions. For the complete range or to discuss yourneeds contact your local ESCO sales specialist

Medical Gas range for Hospital Applications

MED

ICON

VIGI

LANT

MGTQCPESCO Medicon MGTQCP - Dual Tourniquet Control Panel

for setting and monitoring of Tourniquet Cuff Air Supply Monitored Air Supply Warnings are Visual & Audible alerts

Rear Panel View

Specifications!Power ConsumptionOperating Voltage 12 Volts DC +/- 10% Current Consumption 0.3 Amps Power Consumption 3.6 Watts

Environmental ConditionsOperating Temperature Range 0 - 45 Deg C Operating Humidity Range 95% R.H. (non-condensing)Pressure SensorsMaximum Pressure 100 kPaConnecting Tube 6mmNominal Working Pressure Pressure range 5-55kPa (37.5 - 412.5 mmHg)

Pressure DisplaysThree Digit 0 – 100 kPa (0–750 mmHg)

Timers DisplaysTwo Digit 0 – 99 Minutes

Alarm Volume Adjustable in 8 steps

Audio Signals1 Beep Acceptance of a button or operation2 Beeps 15 Minute audible reminder 3 Beeps Rejection of an operation3 Tones Mixed Continuously Alarm signal

Battery LifeUpto 18-24 months Low Battery reading <2.2v

Battery TypeCR2032 Nominal 3V

Wall Box ESCO ES24-B 381mm W x 300mm H x 76mm D (supplied separately)

! Front Panel View