MP1700 Install Manual En

MP1700E Series Installation Manual V1.4

Maipu Confidential & Proprietary Information Page 1 of 49

MP1700E Series Routers

Installation Manual V1.4

Maipu Communication Technology Co., Ltd No. 16, Jiuxing Avenue Hi-tech Park Chengdu, Sichuan Province People’s Republic of China - 610041 Tel: (86) 28-85148850, 85148041 Fax: (86) 28-85148948 URL: http:// www.maipu.com Email: [email protected]



All rights reserved. Printed in the People’s Republic of China. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written consent of Maipu Communication Technology Co., Ltd. Maipu makes no representations or warranties with respect to this document contents and specifically disclaims any implied warranties of merchantability or fitness for any specific purpose. Further, Maipu reserves the right to revise this document and to make changes from time to time in its content without being obligated to notify any person of such revisions or changes. Maipu values and appreciates comments you may have concerning our products or this document. Please address comments to: Maipu Communication Technology Co., Ltd No. 16, Jiuxing Avenue Hi-tech Park Chengdu, Sichuan Province People’s Republic of China - 610041 Tel: (86) 28-85148850, 85148041 Fax: (86) 28-85148948 URL: http:// www.maipu.com Email: [email protected] All other products or services mentioned herein may be registered trademarks, trademarks, or service marks of their respective manufacturers, companies, or organizations.

Document History

Date Revision No. Description

20/09/2007 R1.0 The MP1700E Series Installation Manual V1.4 provides information about the installation of routers designed and developed by Maipu Communication Technology Co., Ltd



Maipu Feedback Form Your opinion helps us improve the quality of our product documentation

and offer better services. Please fax your comments and suggestions to

(86) 28-85148948, 85148139 or email to [email protected].

Document Title MP1700E SERIES INSTALLATION MANUAL V1.4

Product Version

Document Revision Number

1.0

Presentation: (Introductions, procedures, illustrations, completeness, arrangement, appearance)

Good Fair Average Poor

Accessibility: (Contents, index, headings, numbering)


Evaluate this document

Editorial: (Language, vocabulary, readability, clarity, technical accuracy, content)


Your suggestions to improve the document

Please check suggestions to improve this document: Improve introduction Make more concise Improve Contents Add more step-by-step procedures/tutorials Improve arrangement Add more technical information Include images Make it less technical Add more detail Improve index

If you wish to be contacted, complete the following:

Name Company

Postcode Address

Telephone Email



Contents

Installation Manual ....................................................................................7

Purpose .................................................................................................................7

How to Get in Touch ...............................................................................................7

Customer Support...................................................................................................................7

Documentation Support...........................................................................................................7

Overview.....................................................................................................8

Product Features........................................................................................9

Hardware Features.................................................................................. 11

MP1700E Router Appearance.................................................................................11

MP1700E Front Panel ............................................................................................11

MP1700E Back Panel.............................................................................................13

MP1700E System .................................................................................................14

Product Functions .................................................................................................15

MP1700E Main Board ............................................................................................17

Modules.................................................................................................... 19

Sync/Async Serial Interface Module (SAE) Series.....................................................19

1-port High-speed V.24/V.35 Serial Module (1SAE).................................................................19

1SAE Interface Module ..........................................................................................................20

1SAE interface module connected cable..................................................................................20

1SAE Interface Attributes.......................................................................................................20

Channelized E1 Module (CE1) Series ......................................................................21

1-port channelized E1 Module (1CE1).....................................................................................21

1CE1 Interface & Indicator.....................................................................................................21

1CE1 Interface Module Connected Cable ................................................................................21

Non-channelized E1 Series ....................................................................................22



1-port Non-channelized E1 (1E1) ...........................................................................................22

Frequency-band MODEM M336 Series ....................................................................23

1-port 33.6K Frequency-band MODEM (1M336) .....................................................................23

Base-band MODEM (M128) Series..........................................................................25

1-port 128K Base-band MODEM (1M128)...............................................................................25

ISDN (U) Series....................................................................................................26

1-port ISDN U Module (1U)....................................................................................................26

IP Module (VOP/VOS) Series..................................................................................28

1-port VoIP Module (1VOP)....................................................................................................28

2-port VoIP Module (2VOP)....................................................................................................29

1-port Switch VoIP Module (1VOS).........................................................................................30

2-port Switch VoIP Module (2VOS).........................................................................................31

Ethernet Module (ETE) Series ................................................................................33

1-port Ethernet Module (1ETE) ..............................................................................................33

ISDN S/T Module (ST) Series.................................................................................34

1-port ISDN S/T Module (1ST)...............................................................................................34

System Installation................................................................................. 35

Preparation ..........................................................................................................35

Environment Requirements....................................................................................................35

Check Router & Accessories...................................................................................................36

Chassis Installation ...............................................................................................37

Tools & Equipment ................................................................................................................37

Machine Installation...............................................................................................................38

Connecting Power Supply ......................................................................................................38

Main Control Board Cable Connection.....................................................................................39

Console Port Connection........................................................................................................39

Grounding Wire Connection ...................................................................................................39

Module Installation ................................................................................................................40

Rack/Desk ............................................................................................................................40

Panel Wire Connection...........................................................................................................40

Hardware Installation ............................................................................................................41



Module Interface Cable Connection ........................................................................42

1SA Module Cable Connection................................................................................................42

1CE1/1E1 Module Cable Connection.......................................................................................44

1M336 Module Cable Connection............................................................................................44

1M128 Module Interface Cable Connection .............................................................................45

1U Module Interface Cable Connection ...................................................................................45

1VOP/2VOP Module Cable Connection....................................................................................45

1VOS/2VOS Module Cable Connection....................................................................................45

1ETE Module Cable Connection ..............................................................................................46

1ST Module Cable Connection................................................................................................46

Interface Cable Signal............................................................................. 47

Ethernet Interface Cable........................................................................................47

Console Port Cable................................................................................................48

RM2-1E1 & RM2-1CE1 Uses RJ45-RJ45 Cross-cable.................................................49



Installation Manual

Purpose The MP1700E Series Installation Manual V1.4 provides technical

information to understand the installation issues of the routers. The

document provides right answers to your technical queries.

How to Get in Touch The following sections provide information on how to obtain support for

the Maipu English documentation and products.

Customer Support If you have problems or questions regarding your product, please contact

us by e-mail at [email protected]. You can also call our International

Business Department over +86–28-85148850, 85148041, 85148050,

85148750, and 85148997.

Documentation Support Maipu Communication Technology Co., Ltd welcomes comments and

suggestions on the document usefulness. For further queries or

suggestions, contact us by e-mail [email protected] or fax comments

to +86-28-85148948. You can visit our website at http://www.maipu.com,

which comprises interesting subjects such as product knowledge base,

sales & support, and the Maipu news.



Overview

MP1700E router is highly beneficial for finance, telecom, tax, and public

security industries and large & medium enterprises. The routers provide a

series of highly efficient and low cost network interconnection solution for

integration and powerful functions.

The router supports:

Internet connection

Multi-service data integration

Branch dialup & backup service

Internet & Extranet access



Product Features

High performance & reliability – The MP1700E series router’ CPU

provides high performance and RISC communication processor. The

software adapts high performance and reliable RTOS and network

program design. High port integration - The MP1700E series router has two fixed

10/100M fast Ethernet ports, one high-speed asynchronous interface

(1SAE), and voice card and MIM slots. It has powerful multi-port

access performance, which provides high price-performance ratio

network solution.

Modular system structure - The MP1700E series router adapts

modular system, which provides different interface configuration. They

support various optional interface modules and interface cards, and

customers choose different extending interfaces and modules such as

Ethernet interface, sync/async interface, asynchronous interface,

E1/CE1 interface, ISDN-U IST interface, baseband MODEM, frequency

band MODEM and VOP/VOS interface. They also support the site

upgrade of all core software and modular components.

Routing/transmission integration - The MP1700E series router

integrates CSU/DSU, sync 33.6K MODEM, asynchronous 33.6K MODEM,

ISDN NT1 and ISDN TE into router to provide required solutions.

Universality - The MP1700E series router supports a series of Internet

protocol standard (RFC) and international communication network

standard.



Structure - The hardware design adapts lower power consumption

design and integrated structure design, which has powerful

performance on radiation and EMC.



Hardware Features

MP1700E Router Appearance

MP1700E router

MP1700E Front Panel

MP1700E front panel



Indicators from left to right:

SYS & PWR (system and power supply indicator)

SYS - System status indicator. It shines fast when system is loading, and

after that it shines slowly

PWR - System power supply indicator, and it is on after power on.

SLOT1 (slot 1 status indicator)

ACT - voice card module data indicator

RDY - voice card module link status indicator

SLOT 0 (slot 0 status indicator)

ACT - inserted module data indicator

RDY - inserted module link status indicator

SA (fixed sync/async serial status indicator)

ACT - sync/async serial data indicator

LINK - sync/async serial link status indicator

CONSOLE (console port)

TXD - console port data sending indicator

RXD - console port data receiving indicator

ETHERNET1 (Ethernet interface1)

100M - 10/100M Ethernet interface data rate indicator. On: 100M，off:

10M

ACT - Ethernet interface data indicator

ETHERNET0 (Ethernet interface 0)

100M - 10/100M Ethernet interface data rate indicator. On: 100M/off: 10M

ACT - Ethernet interface data indicator



MP1700E Back Panel

MP1700E back panel interface configuration

MP1700E back panel interface:

Interface Form Description Application

ON/OFF Power supply switch, right is OFF; left is ON

INPUT AC 100-240V 1A input

SLOT1 Bus slot VOP/VOS module

SLOT0 Decided by interface module

High-speed serial, bus slot

MIM module

S/A DB25 pin High-speed serial High-speed fixed sync/async interface

SLOT1 is voice card module slot for VOP/VOS series module; SLOT0 is MIM

slot, adopting modularization design, and its function can be realized

according to different interface card and relevant software modules.



MP1700E System MP1700E router basic configuration and working environment:

Item Description

Console port One fixed, async DTE working mode (RJ45)

Ethernet interface Two fixed 10/100Mbps fast Ethernet (RJ45)

SA interface One fixed high-speed async/sync interface (DB25)

Voice card slot One voice card SLOT1

MIM slot MIM SLOT0, supports various modules

Processor High performance PowerPC processor

FLASH 8MB

SDRAM 64MB

Dimension (W×D×H)

340×230×44 (mm)

Power supply input voltage

AC: 100 – 240V 50/60HzDC: －40～－57V - only MP1700E supports. AC/DC.

Environment Temperature

0-40℃

Environment humidity

10-90%. Non-condensing

Power supply rating power

45W

Maximum power consumption

15W

MP1700E router doesn’t have asynchronous interfaces with modular and

clip design.



Product Functions MP1700E functions, supported protocols & services:

Supported protocols & Services

Description

Network protocol WAN supports: PPP PPP compression SLIP CSLIP Frame relay Frame relay switching X.25 X.25 switching HDLC LAPB ISDN LAN is Ethernet network, and it supports two kinds of link layer frame format: Ethernet-II Ethernet-SNAP

Dialup network MODEM dialup（call in/call out）

CALLBACK Dialup on demand Dialup backup

Routing protocol Static routing Dynamic routing: RIPv1 RIPv2 OSPF BGP IRMP (compatible with CISCO EIGRP protocol) SNSP (compatible with CISCO ODR protocol) Dial-on-demand routing (DDR) Policy routing Multicast: IGMP PIM-SM PIM－DM

DVMRP Hot backup: VRRP VBRP (compatible with CISCO HSRP protocol)

Network service ARP



Proxy ARP L2TP Configuration command protection IP packet filtering firewall IP UNNUMBERED IP policy routing DHCP relay PAP/CHAP check EASY IP NAT network concealing RADIUS check IPSEC data encryption IKE GRE Load balance MPLS

QoS service PQ CQ WFQ CBWFQ LLQ WRED CAR

Network management SNMPv1, SNMPv2, SNMPv3 Supporting standard network management (fully compatible with CISCO) Configuration via Console port Local or remote login via local Telnet Configuration command security isolation function Chinese/English prompting and help information Debugging information, for troubleshooting. Login and managing other products via Telnet Download and upload configuration file and application program by FTP Download and upload configuration file and application program by TFTP Colorful distributing debugging information Log function

Security IP packet filtering firewall, PAP/CHAP, MD5, NAT, RADIUS, TACACS, IPsec data encryption



MP1700E Main Board

The MP1700E main board includes 12/4/4 fixed interface, one voice card

slot, one MIM slot, eight indicators and power supply slots.

Fixed interface

The MP1700E provides fixed console port, Ethernet interface, high-speed

sync/async interface and asynchronous serial, which is totally 12/4/4 fixed

interfaces.

Console port

Console port attributes:

Attributes Description

Converter type RJ45

Interface standard RS232

BR 9600bps - 115200bps

Supported service Connect to character terminal Connect to local PC serial, and operate terminal emulation program command line interface on PC

Ethernet interface

Ethernet interface attributes:


Converter type RJ45

Interface number 2

Supported frame format Ethernet_II Ethernet_SNAP IEEE 802.2 IEEE 802.3

Working mode 10M/100M adaptive Full/half-duplex Auto across

Supported network protocol IP Novell IPX



Fixed high-speed sync/async interface

Fixed high-speed sync/async interface attributes:

Description Attributes

Synchronous Asynchronous

Converter type DB25 DB25

V.24 V.35 Interface standard and working mode DTE

DCE DTE DCE

EIA/TIA-232

Minimum (bps) 1200 1200 300

Maximum (bps) 128K 8M 115.2K

Dialup Backup

Supported protocols & Services

X25 HDLC PPP SLIP FR LAPB

HDLC PPP SLIP

Slot

MP1700E series router has two slots: SLOT0 and SLOT1. SLOT0 is MIM

module slot, and it supports Ethernet interface module, sync/async

interface module, asynchronous interface module, E1/CE1 interface

module, U interface module, ST interface module, baseband MODEM

interface module, frequency band MODEM module, VOP/VOS module. It is

compatible with MP17XX，MP26XX series router function module.

SLOT1 is voice card slot for VOP/VOS card module, which can access any

telephone via dialup or second dialup; you can realize free phone call in

network by IP network.



Modules

MP1700E router is modular router and provides two slots. SLOT1 is voice

card slot for VOP and VOS series voice modules. SLOT0 is MIM slot

compatible with all serial interface modules. Supported modules are 1SAE,

1CE1, 1E1, 1M336, 1M128, 1U, 1VOP, 2VOP, 1VOS, 2VOS, 1ETE, 1ST and

8AX.

Sync/Async Serial Interface Module (SAE) Series 1-port High-speed V.24/V.35 Serial Module (1SAE) 1SAE module is applied for MP1700E router, and its main function is to

complete the processing of 1port sync/async serial data flow. For

synchronization, DCE working mode is 2.048Mbps; DTE working mode is

8Mbps.

For Asynchronization, it is 115.2Kbps. The MP1700E router serial interface

default working mode is in synchronous mode. Synchronous serial

interface works in DTE or DCE mode. In DTE mode, it receives external

DCE clock, such as external modem; while in the mode of DCE, router

provides clock. V24/V35 mode switch is through panel.



1SAE Interface Module

1-port high-speed V.24/V.35 serial module（1SAE）

1SAE interface module connected cable 1SAE module interface cable is V35 DTE cable and V24 connected DTE

cable.

1SAE Interface Attributes 1SAE module interface attributes:

1-port high-speed V.24/V.35 serial module (1SAE) attributes:

Description Attributes

Sync Async

Tie-in DB25-DB25 DB25-DB25

V.24 V.35 Interface standard and working mode DTE

DCE DTE DCE

EIA/TIA-232

Minimum baud rate (bps) 1200 1200 300

Maximum baud rate (bps) 128K 8M 115.2K

Dialup Backup

Supported protocols & services

X25 HDLC PPP SLIP FR LAPB

HDLC PPP SLIP



Channelized E1 Module (CE1) Series 1-port channelized E1 Module (1CE1) 1-port channelized E1 module main function is to provide 1984K multi-

timeslot data flow receiving and sending and processing port. As CE1

interface, it divides slot 1-31 to different groups, and each group timeslot

after binding can be used as one interface.

1CE1 Interface & Indicator 1CE1 interface:

1-port channelized E1 (1CE1)

1-port channelized E1 (1CE1) indicator:

LOS On: Can not check frame sync signal Off: After sync

1CE1 Interface Module Connected Cable 1CE1 and BNC pin coaxial cable and RJ45-RJ45 straight connected twisted-

pair cable.



1CE1 Interface Module Attr ibutes

1-port channelized E1 (1CE1) attributes:


Interface BNC

Interface number 1 group

Interface standard G.703

Supported protocol PPP X.25 HDLC FR

Non-channelized E1 Series 1-port Non-channelized E1 (1E1) 1port non-channelized E1 module provides a data transmission port with

2.048Mbit/s bandwidth. E1 is same as CE1, it can be divided into 32

timeslots, and timeslot 0 of E1 can be used to transmit data in unframed

mode, to realize 2M transparent transmission.

1E1 Interface Module & Indicator

1E1 interface module:

1-port non-channelized E1（1E1）

1-port non-channelized E1（1E1）indicator:

LOS On: transparent 2M transmission; on: non-transparent and cannot check frame synch signal; off: after synch.



1E1 Interface Connected Cable

1E1 and BNC pin coaxial cable and RJ45-RJ45 straight connected twisted-

pair cable.

1E1 Interface Attributes

1E1 interface attributes:

1-port non-channelized E1 (1E1) attributes:


Interface BNC

Interface number 1 group

Interface standard G.703

Supported service X.25 FR

Supported protocol PPP HDLC

Frequency-band MODEM M336 Series 1-port 33.6K Frequency-band MODEM (1M336) 1-port 33.6K frequency-band MODEM is same as out-built or inbuilt

MODEM. Its interface works in the mode of synch or async. It also

supports leased line or dialup line working mode.



1M336 Interface Module & DIP Switch

1M336 interface module:

1-port 33.6K frequency-band MODEM (1M336)

DIP switch:

1-port 33.6K frequency-band MODEM (1M336) DIP switch:

DIP switch Mode

1 2

Description

Frequency-band MODEM mode

OFF OFF LINE is used as inbuilt frequency-band MODEM interface.

Console port mode ON OFF LINE is used as CONSOLE port.

1M336 Interface Module Connected Cable

1M336 module connected cable is RJ45 (4, 5 signal line) or RJ11line.

1M336 Module Interface Attr ibutes

1-port 33.6K frequency-band MODEM (1M336) interface:


Tie-in RJ45

Interface number 1

Supported link protocol

PPP FR X.25 HDLC

Supported network protocol

IP



Base-band MODEM (M128) Series 1-port 128K Base-band MODEM (1M128)

1M128 Interface Module, Indicator & DIP

Switch

1M128 interface module:

1-port 128K baseband MODEM (1M128)

Indicator description:

1-port 128K base-band MODEM (1M128) indicator:

ACT On: Link established.

B1 B1 channel indicator LED on: When using channel B1, and rate is 64K

B2 B2 channel indicator LED on: When using channel B2, and the rate is 128K

DIP switch:

1-port 128K baseband MODEM (1M128) DIP switch:

DIP switch Mode

1 2

Description

Loopback ON Reserved



1M128 Interface Connected Cable

1M336 module connected cable is RJ45 (4, 5 signal line) or RJ11 telephone

line.

1M128 Interface Attributes

1M128 interface attributes:

1-port 128K base-band MODEM (1M128) interface:


Tie-in RJ45

Interface number 1


PPP ·frame relay ·X.25 ·HDLC

Supported network protocol ·IP

ISDN (U) Series 1-port ISDN U Module (1U) 1port ISDN U module connects DDN network and ISDN network, and not

to connect modem.

1U Module & Indicator

1U module:




1-port ISDN U module (1U) indicator:

ACT The LED on after link established

B1 B1 channel indicator LED on: when using channel B1, and rate is 64K

B2 B2 channel indicator LED on: when using channel B2, and the rate is 128K

1-port ISDN U module (1U) DIP switch:

DIP switch Mode

1 2

Description

Loopback ON Reserved

1U Module Connected Cable

1U module connected cable RJ45 (4, 5 signal line) or RJ11 telephone line.

1U Interface Attributes

1U interface attributes:

1-port ISDN U module (1U) interface attributes:


Tie-in RJ45

Interface number 1


PPP

Supported network protocol

IP



IP Module (VOP/VOS) Series 1-port VoIP Module (1VOP) 1-port VoIP module accesses any telephone through IP network; You can

easily realize free phone call through IP network.

1VOP Module Indicator

1VOP interface module:

1-port VoIP module (1VOP)

1-port VoIP module (1VOP) indicator:

V1 VoIP module indicator. The LED is on during the call.

V2 1VOP module may not have this LED, and if it has, the LED will be not on.

1VOP Module Connected Cable

1VOP module connected cable is RJ45 (4, 5 signal line) and RJ11 telephone line.



1VOP Interface Attributes

1-port Voice module (1VOP) interface attributes:


Interface RJ45 jack

Interface number 1

Supported protocol

H.225 H.245 RTP RTCP G.711 G.723 G.729

2-port VoIP Module (2VOP) 2-port VoIP module may access any call in IP network via dialup; you can realize

free phone call via IP network.

2VOP Module & Indicator

2VOP module:

2-port VoIP module (2VOP)

2-port VoIP module (2VOP) indicators:

V1 VoIP module indicator. LED on: after pickup, during the call.

V2 VoIP module indicator. LED on: after pickup, during the call.

2VOP Module Connected Cable

2VOP module connected cable is RJ45 external cable.



2VOP Module Interface Attributes

2VOP interface attributes:

2-port VoIP module (2VOP) interface attributes:


Interface RJ45 jack (two RJ11 plugs)

Interface number

2 (RJ11)

Supported protocol

H.225 H.245 RTP RTCP G.711 G.723 G.729

1-port Switch VoIP Module (1VOS) 1-port switch VoIP module may access any phone in IP network through dialup or

second dialup; you can easily realize free phone call through IP network.

1VOS Module & Indicator

1VOS module:

1-port switch VoIP module (1VOS)


1-port switch VoIP module (1VOS) indicator:

V1 VoIP module indicator. LED on: During the phone call.

V2 1VOS module may not have this LED. Otherwise, the LED will never be on.



1VOS Module Connected Cable

1VOS module connected cable is RJ45 (4, 5 signal line) and RJ11 cable.

1VOS Interface Attributes

1-port switch VoIP module (1VOS) interface attributes:


Interface RJ45 jack

Interface number 1

Supported protocol

H.225 H.245 RTP RTCP G.711 G.723 G.729

2-port Switch VoIP Module (2VOS) 2-port switch VoIP module access any phone in IP network via dialup or second

dialup; you can easily realize free phone call via IP network.

2VOS Interface Module & Indicator

2VOS interface module:

2-port switch VoIP module (2VOS)




2-port switch VoIP module (2VOS) indicator:

V1 VoIP module indicator. LED on: during the phone call

V2 VoIP module indicator. LED on: during the phone call

2VOS Module Connected Cable

2VOS module connected cable is RJ45 external cable.

2VOS Module Interface Attributes

2-port switch VoIP module (2VOS) interface attributes:


Interface RJ45 jack

Interface number 2 (RJ11)

Supported protocol H.225 H.245 RTP RTCP G.711 G.723 G.729



Ethernet Module (ETE) Series

1-port Ethernet Module (1ETE) 1-port Ethernet module realizes Ethernet connection.

1ETE Module & Indicator

1ETE module:

1-port Ethernet module (1ETE)

1-port switch VoIP module (1ETE) indicator:

LINK On: link connected

Tx LED Blinking: data transmit

Rx LED Blinking: data receive

1ETE Module Connected Cable

RJ45 cable.

1ETE Module Interface Attributes

1ETE module interface attributes:

1-port Ethernet port (1ETE) attributes:


Tie-in RJ45

Tie-in number 1

Supported protocol 802.3



ISDN S/T Module (ST) Series 1-port ISDN S/T Module (1ST) 1port ISDN S/T module.

1ST Module & Indicator

1ST module:

1-port ISDN S/T module (1ST) indicator:

ACT Active indicator, and it is on when it operates normally.

B1 B1 channel indicator. The indicator on when using Channel B1, B1=64K or B1+B2=128K

B2 B2 channel indicator. The indicator on when using Channel B2, B2=64K or B1+B2=128K

1ST Module Connected Cable

1ST cable is RJ45 straight connected Ethernet cable.

1ST Module Interface Attributes

1-port ISDN S/T module (1ST) interface attributes:


Tie-in RJ45

Number 1

Supported protocol PPP



System Installation

Preparation

Read the manual

Place router on a safe flat surface

Do not put heavy material on router

Use UPS

Ensure proper grounding

Environment Requirements

Operat ing Environment

To ensure good working of router, maintain stable temperature and

humidity. Always place router in the equipment room. The environment

requirements are:

Environment temperature: 0～40°C

Humidity: 10～90%. Non-condensing

Around the ventilation, the space should be no less than10cm. We suggest

installing router on 19-inch standard rack.



Temperature & Humidi ty

Maintain stable temperature and humidity in the equipment room.

Temperature Relevant humidity

Long-term Short-term Long-term Short-term

15°C ~ 30°C 0 ~ 40℃ °C 40％ ~ 65% 0% ~ 90%

Dust- f ree Environment

Dust is harmful for router operation. Dust causes static absorption. Dust

damages the router especially when the temperature and humidity are

lower.

Check Router & Accessories Before installation, check the router and its accessories.

Router Conf igurat ion & Accessor ies Item Name No Description

1 MP1700Echassis 1 Router chassis

2 Power supply cable 1 220V10A

3 Console port cable 1 RJ45-DB9 crossing cable

4 Ethernet cable 2 Straight Connected Ethernet cable

5 Sync/async DTE cable 1 V35 DTE cable (1)

6 Technical documents 1 Installation manual configuration Manual (CD)

7 Installation fittings 1 Feet mat and installation bolt 1 set.

8 Product packaging 1 Including foam anti-shocking material and external packing box, plastic bag etc.



Chassis Installation Tools & Equipment Tools:

Screwdriver

Anti-static equipment

Connected cables:

Console port cable

Ethernet cable (MP1700E Ethernet cable is configured according to the

number of Ethernet modules)

Modular interface cable

Equipment:

Ethernet 10 BASE-T HUB

Configuring terminal (can be PC)

Equipment relevant to optional module



Machine Installation The dimension of MP1700E is 340mm x 230mm x 44mm（W×D×H）and

its installation process is:

Step 1: Fix angle iron on front panel or back panel sides with bolts

Step 2: Place router on empty slot

Step 3: Fix angle iron to slots with bolts

Step 4: Bracket and fixed angle iron will be fixed on the rack

Connecting Power Supply MP1700E router adapts stable power supply switch system and have

different power supply system.

Input power supply (AC): 100～240V，50/60Hz

Input power supply (DC): -40～-57V only MP1700E supports

Power consumption: 15W±10%

Always use the power supply jack or MIM PC power supply jack. Ensure

reliable grounding.

Ground wire

Live wireNaught wire

Power supply jack



Connecting power supply:

Put power supply switch to OFF, and then connect one side of power

supply cable to the entry of back panel of router, and another side to

power supply jack（AC: 220V 50Hz/60Hz, DC: -48V）, only MP1700E

supports

Put power supply switch to ON

Check whether the power supply lamp of front panel is on, if not,

please repeat step one and two.

Main Control Board Cable Connection The section explains the method of connecting MP1700E router control

board cable to network including connecting router console port.

Console Port Connection Routers provide one EIA/TIA-232 async serial console port. The user

configures router via the port by adopting RS-232 serial character terminal

(normally a PC).

Step 1: Find a character terminal – a standard terminal with RS-232

serial or normal PC.

Step 2: Ensure that router or terminal is out of power supply and

connect RS-232 serial and console port with cables.

Grounding Wire Connection MP1700E connecting to the ground guarantees of anti-thunder and

malfunctioning of routers. For external network connection, such as E1

interface, PSTN are protected by the grounding cable.

Connect this point and ground by a thick cable, with the resistance no

bigger than 4Ω. If the router is installed on 19-inch standard rack, the

rack should be grounding.



Module Installation The routers adapt modular system structure and different kinds of

interface configuration.

Module installation steps:

Step 1: Choose the module and interface.

Step 2: Inset the module to slot. Insert the module circuit board into

interface card slot.

Step 3: Push in the module close to back panel.

Step 4: Tighten the screw.

Rack/Desk Installing routers to 19-inch standard rack:

Front-end installation method:

Step 1: Install ear bracket to both sides of front-end of MP1700E and

fix with screw.

Step 2: Place router on standard rack and connect bracket and metal

frame with screw.

Panel Wire Connection Panel wire connection includes Ethernet interface cable, WAN sync/async

cable connection.



Hardware Installation

Complete machine installation according to the details, and make sure

the power supply switch is OFF

Connect one side of AC power supply cable to router power supply, and

another side to power supply jack

Configure the router through console port after first power on

Insert one side of configuration cable to console port, and another side

to PC or terminal serial

Insert one side of Ethernet cable to LAN interface, and another side to

LAN

Connect sync/async communication cable to router WAN Interface

MP1700E sync/async interface can work in the mode of V.24/V.35, and

these two modes are completed by V.24/V.35 button

In V.24 mode, interface adopts standard RS232 cable connection

In V.35 mode, interface adopts special V.35DTE cable

V.24/V.35 cable



Module Interface Cable Connection 1SA Module Cable Connection Before connecting sync/async serial, ensure the following two points:

Equipment type: The equipment type connecting sync/async serial,

which is sync/async or DTE/DCE. Access equipment requires signal

standard, baud rate and sync clock.

DTE/DCE: Sync/async serial accesses external Modem or TA (terminal

adapter) as dialup interface. Sync serial has two modes - DTE and DCE.

Router is used as DTE equipment.

DTE and DCE equipment:

Equipment type Interface type Equipment

DTE Pin type PC Router

DCE Hole type MODEM Multiplexer CSU/DSU

Rate and transmission distance: Sync/async serial supports

different signal standards and baud rates in different working modes.

Choose cables as per prevailing conditions.



V.24 cable rate and transmission distance:

Baud rate (bps) Maximum transmission distance (m)

2400 60

4800 60

9600 30

19200 30

38400 20

64000 20

115200 10

V.35 cable rate and transmission distance:

Baud rate (bps) Maximum transmission distance (m)

2400 1250

4800 625

9600 312

19200 156

38400 78

56000 60

64000 50

2048000 30



1SAE Module Cable Connect ion

Step 1: Insert one side of DB-25 to 1SAE module DB-25 interface and

screw down fixed knob.

Step 2: Connect another DB25 interface to V.24-V.35 (DB-25, M-34)

cable and then connect the following equipment:

- If WAN is DDN line, connect (V.35 cable) to digital Modem V.35

interface.

- If WAN is dialup line, connect (V.24 cable) to analog Modem serial.

Step 3: After power on, check indicator status on 1SA module panel.

- DCD on: Link connected

1CE1/1E1 Module Cable Connection

Step 1: Connect one side of BNC plug to BNC interface of 1CE1/E1

module. Connect another side to equipment. Connect TX to RX

equipment. Connect RX TX line.

Step 2: After power on, check LOS status of 1CE1/E1 module.

Indicator on means malfunction and signal loses sync. Then check the

line.

1M336 Module Cable Connection Insert RJ11 plug of 1M336 module cable to LINE jack.



1M128 Module Interface Cable Connection Step 1: Insert RJ11 plug of 1M128 module cable to LINE jack.

Step 2: After power on, please check ACT status of 1M128 interface

module. If the indicator is off, please check the line.

1U Module Interface Cable Connection Step 1: Insert RJ11 plug of 1U module cable to external line;

Step 2: After power on, please check ACT status of 1M128 interface

module. If the indicator is off, please check the line.

1VOP/2VOP Module Cable Connection Connect VOP module cable according to the following steps:

Step 1: insert telephone line to RJ11/RJ45 interface of 1VOP/2VOP,

and another side to telephone.

Step 2: when having the phone call, pay attention to the indicator of

1VOP/2VOP card back panel: the indicator and Active LED should be on.

1VOS/2VOS Module Cable Connection Connect VOS module cable according to the following steps:

Step 1: Insert telephone line to RJ11/RJ45 interface of 1VOS/2VOS,

and another side to small switch or external junction box.

Step 2: When having the phone call, pay attention to the indicator of

1VOS/2VOS card back panel: the indicator and Active LED should be

on.



1ETE Module Cable Connection Please connect 1ETE module cable according to following steps:

Step 01: Insert one end of RJ45 cable into 1ETE module to the jack

Step 02: Connect another end of RJ45 to relevant equipment line

1ST Module Cable Connection Connect 1ST module cable according to following steps:

Step 01: Insert one end of RJ45 cable into 1ST module

Step 02: Connect another end of RJ45 to relevant equipment line



Interface Cable Signal

Ethernet Interface Cable MP1700E router Ethernet interface cable is 8-pin unshielded twisted-pair.

Pin 1,2 is transmit and pin 3,6 is receive. They can be connected with HUB.

RJ45 Signal Direction RJ45 Length 1 TX+ —> 1 2 TX- —> 2 3 RX+ <— 3 6 RX- <— 6 4 --- --- 4 5 --- --- 5 7 --- --- 7 8 --- --- 8

2m

RJ45 cross cable (type-5 twisted-pair) pin configuration

RJ45 Signal Direction RJ45 Length 1 TX+ —> 3 2 TX- —> 6 3 RX+ <— 1 6 RX- <— 2 4 --- --- 7 5 --- --- 8 7 --- --- 4 8 --- --- 5

2m



Console Port Cable MP1700E router console port cable is connected with . One side RJ45 plug and the

other is DB9 female.

RJ45 jack standard DB9 interface

CONSOLE PORT CABLE PIN CONFIGURATION

RJ45 Signal Direction DB9 Length

1 CTS —> 8

2 DSR —> 6

3 RXD —> 2

4 GND --- 5

5 --- --- ---

6 TXD <— 3

7 DTR <— 4

8 RTS <— 7

--- --- 1

--- --- 9

3m

5 4 3 2 1

9 8 7 6



RM2-1E1 & RM2-1CE1 Uses RJ45-RJ45 Cross-cable

PIN CONFIGURATION FOR RJ-45 CROSS-CABLE

RJ45 Signal Direction RJ45

1 RX+ <— 4

2 RX- <— 5

3 --- --- 7

6 --- --- 8

4 TX+ —> 1

5 TX- —> 2

7 --- --- 3

8 --- --- 6

Date post:	22-Apr-2015
Category:	Documents
Upload:	yadi-rudi
View:	109 times
Download:	0 times

MP1700 Install Manual En

Documents