Series KJ One-Touch Mini Fittings
Fittings & Tubing
1412
One-Touch Mini Fittings
Applicable Tubing
Series KJ
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread: M3, M5, R1/8
Fluid
Max. operating pressure
Operating vacuum pressure
Proof pressure
Ambient and fluid temperature
Thread
Thread label (Standard)For application requiring copper-free material (Standard)
Air, Water Note1)
1.0MPa
–100kPa
3.0MPa
–5 to 60˚C, In case of water: 0 to 40˚C (with no condensation)
JIS B0203 (Taper thread for piping)JIS B0209, Class 2 (Metric coarse thread)
JIS B0211, Class 2 (Metric fine thread)
With sealant
Brass parts are all electroless nickel plated.
Mounting
Nut
Note1) Applicable to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure.
Tubing material
Tubing O.D.
Nylon, Soft nylon, Polyurethane
ø2, ø3.2, ø4, ø6
PAT.
ChuckApplicable to nylon and polyurethane.Large retaining force.Secure engagement and large retaining force with chuck.
Compatible with low vacuum to 1.0 MPa of pressure.The special shape ensures sealing and reduces resistance of tubing insertion.
Requires little force for removal.Releases the chuck to remove the tubing.Prevents the chuck from biting too deeply into the tubing.Tubing removal is easier.
Enables piping in a narrower space.Body and thread can be rotated (For positioning).Electroless nickel plated.R1/8 thread with sealant.
Packing
Stud
Release bush (Light grey)
O-ringBody (White)Tubing
Gasket
Guide 2Guide 1
Outside diameter reduced by 20%(Compared with series KQ), allowing piping in a narrower space.
Thread sealant as standard.
For application requiring copper-free material. (Electroless nickel plating)
Compatible with vacuum to –100 kPa of pressure.
ø2 One-touch MiniSeries KJ
One-Touch Mini Fittings Series KJ
Fitti
ngs
& T
ubin
g
1413FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
M3M5
2
M3M5
2
2M3M5
2M5M3
KJH Male Connector
Tubing Female thread hole
3.2
4
6
M5
M3
M3
M5
M5
KJH02-M3 -M5KJH23-M3
-M5 -01S
KJH04-M3 -M5 -01S
KJH06-M5 -01S
Most common style used to pipe from female thread in the same direction.
<M3, M5>
<R1/8>
<R1/8>
The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space.
Applicabletubing O.D.
mm
3.2
6
4
Connecting thread
M3
M3
M5
M5
M5
Applicabletubing O.D.
mm
Connecting thread Model
KJS02-M3KJS23-M3
-M5KJS04-M3
-M5 -01S
KJS06-M5 -01S
Model
<R1/8>
To branch the line from the female thread at 90˚ in each direction.
<M3, M5>
Applicabletubing O.D.
mm
M3
M3
M5
M5
3.2
4
6
Connecting thread
M5
KJT02-M3 -M5
KJT23-M3 -M5 -01S
KJT04-M3 -M5 -01S
KJT06-M5 -01S
Model
<M3, M5>
<R1/8>
Most common style used to pipe from female thread at a right angle.
Applicabletubing O.D.
mm
3.2
6
4
Connecting thread
M3
M3
M5
M5
M5
KJL02-M3 -M5
KJL23-M3 -M5 -01S
KJL04-M3 -M5 -01S
KJL06-M5 -01S
Model
<M3, M5>
<R1/8>
To branch the line from the female thread in the same direction and at 90˚.
<M3, M5>
Applicabletubing O.D.
mm
M3
M3
M5
M5
3.2
4
6
Connecting thread
M5
KJY02-M3 -M5
KJY23-M3 -M5 -01S
KJY04-M3 -M5 -01S
KJY06-M5 -01S
Model
3.2
4
6
M5
M5
M5
KJU23-M5 -01S
KJU04-M5 -01S
KJU06-M5 -01S
To branch a tubing in the same direction.
<M5>
<R1/8>
Applicabletubing O.D.
mm
Connecting thread Model
R1/8
R1/8
R1/8
R1/8
R1/8
R1/8
R1/8
R1/8
R1/8
R1/8
R1/8
R1/8
R1/8
R1/8
R1/8
R1/8
R1/8
KJS Hex Socket head Male ConnectorKJT Male Branch Tee
KJL Male Elbow KJY Male Run Tee
KJU Branch “Y”
2 M3
<R1/8>
Basically used in the same way as a male elbow.But also used in 3 dimensional piping to prevent interference of fittings.
<M3, M5>
Applicabletubing O.D.
mm
M3
M3
M5
M5
3.2
4
6
Connecting thread
M5
KJW02-M3 -M5KJW23-M3
-M5 -01S
KJW04-M3 -M5 -01S
KJW06-M5 -01S
Model
R1/8
R1/8
R1/8
KJW Extended Male Elbow
M3M5
2
Series KJ One-Touch Mini Fittings
Fittings & Tubing
1414
KJH Straight Union
Tubing Tubing
KJH Different Diameter Straight
KJE Bulkhead Union KJT Dfferent Diameter Tee
KJL Union Elbow KJU Different Diameter Union “Y”
KJT Union Tee
To connect tubing in the same direction.
Applicable tubing O.D.mm
3.246
KJH02-00KJH23-00KJH04-00KJH06-00
Model
To connect tubing through a panel.
Applicable tubing O.D.mm
23.246
KJE02-00KJE23-00KJE04-00KJE06-00
Model
3.246
To connect tubing at right angles to each other.
Applicable tubing O.D.mm Model
KJL23-00KJL04-00KJL06-00
23.246
To branch tubing into 2 directions each at 90˚ to the original one.
Applicable tubing O.D.mm Model
KJT02-00KJT23-00KJT04-00KJT06-00
23.246
To branch tubing in the same direction.
Applicable tubing O.D.mm Model
KJU02-00KJU23-00KJU04-00KJU06-00
To connect tubing of different diameters.
Applicable tubing O.D.mm
2
3.2
4
b3.24466
KJH02-23 -04KJH23-04
-06KJH04-06
Model
To branch the tubing into two at a right angle and reduce the resulting branches in size.
Applicable tubing O.D.mm
a3.24
b46
KJT23-04KJT04-06
Model
2- a b
ba
To branch tubing into 2 smaller tubing in the same direction as the original one.
Applicable tubing O.D.mm
a22
3.24
b3.2446
KJU02-23KJU02-04KJU23-04KJU04-06
Model
2- a
b
a
KJU Union “Y”
2
One-Touch Mini Fittings Series KJ
Fitti
ngs
& T
ubin
g
1415FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
KJL Plug-In Elbow
Tubing One-touch fittings
KJU Plug-In “Y”
KJR Plug-In Reducer KJX Reducer Union Plug-In “Y”
KJL Reducer Elbow
KJF Female Connector
To change the tubing direction from a one-touch fitting by 90˚.
Applicabletubing O.D.
mm3.246
Aplicablefitting size
3.246
KJL23-99KJL04-99KJL06-99
Model
To connect to a smaller one-touch fitting.
Applicabletubing O.D.
mm
Applicablefitting size
3.2
4
4466
KJR02-04KJR23-04
-06KJR04-06
Model
To change the tubing direction from a one-touch fitting by 90˚ as well as to connect to a tubing of a smaller diameter.
Applicabletubing O.D.
mm
Applicablefitting size
3.2
4
466
KJL23-04 -06
KJL04-06
Model
To branch the line from a one-touch fitting into tubing in the same direction.
Applicabletubing O.D.
mm
Applicablefitting size
3.246
3.246
KJU23-99KJU04-99KJU06-99
Model
To branch the line from a one-touch fitting into smaller diameter in the same direction.
Applicabletubing O.D.
mm
Applicablefitting size
3.24
46
KJX23-04KJX04-06
Model
To pipe from the male threaded portion of a pressure gauge, etc.
Applicabletubing O.D.
mm
3.2
6
4
Connecting thread
KJF23-M3 -M5
KJF04-M3 -M5
KJF06-M5
Model
Tubing
M3M5M3M5M5
Male thread
2
KJP PlugTo plug unused one-touch fittings.
Applicablefitting size
2 KJP-02
Model
Series KQ2 One-Touch Fittings
Fittings & Tubing
1416
Applicable tubing diameter: Metric Size Connecting thread: M, R, Rc
Fluid
Max. operating pressure
Operating vacuum pressure
Proof pressure
Ambient and fluid temperature
Thread
Sealant (Thread portion)
Air, Water Note 1)
1.0MPa
–100kPa
3.0MPa
–5 to 60˚C, In case of water: 0 to 40˚C (With no condensation)
JIS B0203 (Taper thread for piping)JIS B0209, Class 2 (Metric coarse thread)
JIS B0211, Class 2 (Metric fine thread)
With / Without sealant
Mounting
Nut
Note 1) Applicable to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure.
ChuckApplicable to nylon and polyurethaneLarge retaining forceSecure engagement with chuck and large retaining force with collet.
Compatible with a wide range of pressure, from low vacuum to 1.0 MPa.The special shape ensures sealing and reduces resistance in tubing insertion.
Series KQ2: Light greySeries KQ : BlueRequires little force for removalReleases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing.
Effective for piping in confined spaceThe body and thread portion can be rotated. (For positioning)
Packing
Stud
Release button
O-ringBody
Tubing
M, R, RcThread
ColletGuide
Series
Series KQ2Series KQ
Body
White
Black
Release button
Light grey
Blue
Tubing material
Tubing outside O.D.
Nylon, Soft Nylon, Polyurethane
ø3.2, ø4, ø6, ø8, ø10, ø12, ø16
Series KQ2: White bodySeries KQ : Black body
PAT.
KQ2/White body
One-Touch Fittings
Applicable Tubing
Series KQ2
Colour
Specifications
Wide range of pressures - Low vacuum (10 Torr) to 10 Bar (1.0MPa) pressure
Wide range of tube systems (3.2mm - 16mm OD tube)
Minimised resistance to air flow
Widest range of configuration available
Choice of body colour to suit customer application
Features
Uni-fitting seriesUniversal application to G, Rc and NPT areas
Also available
Imperial sizes
Contact SMC for details of these types.
A full range of SMC fittings is available tosuit imperial size tubing from 1/8 to 1/2”,with either European standard Metric and Rthreads or American standard UNF andNPT threads.
One-Touch Fittings Series KQ2
Fitti
ngs
& T
ubin
g
1417FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
3.2
4
6
8
10
12
16
M5
M5M6
M5M6
KQ2H23-M5 -01S -02SKQ2H04-M5 -M6 -01S -02SKQ2H06-M5 -M6 -01S -02S -03SKQ2H08-01S -02S -03SKQ2H10-01S -02S -03S -04SKQ2H12-02S -03S -04SKQ2H16-03S -04S
KQH23-M5 -01S -02SKQH04-M5 -M6 -01S -02SKQH06-M5 -M6 -01S -02S -03SKQH08-01S -02S -03SKQH10-01S -02S -03S -04SKQH12-02S -03S -04SKQH16-03S -04S
Most common style used to pipe from female thread in the same direction.
<M5, M6>
<R>
Applicabletubing O.D.
mm
Connecting thread
Model
Most common style used to pipe from female thread at aright angle.
<M5>
<M6>
<R>
KQ2H( ) KQH( )
For piping at 45˚ from female thread.Intermediate model between male connector and male elbow.
<M5, M6>
<R>
Applicabletubing O.D.
mmM5M6
M5M6
4
6
8
10
12
16
Connecting thread
KQ2K04-M5 -M6 -01S -02SKQ2K06-M5 -M6 -01S -02S -03SKQ2K08-01S -02S -03SKQ2K10-01S -02S -03S -04SKQ2K12-02S -03S -04SKQ2K16-03S -04S
KQK04-M5 -M6 -01S -02SKQK06-M5 -M6 -01S -02S -03SKQK08-01S -02S -03SKQK10-01S -02S -03S -04SKQK12-02S -03S -04SKQK16-03S -04S
Applicabletubing O.D.
mm
Connecting thread
3.2M5
M5M6
M5M6
4
6
8
10
12
16
KQ2L23-M5 -01S -02SKQ2L04-M5 -M6 -01S -02SKQ2L06-M5 -M6 -01S -02S -03SKQ2L08-01S -02S -03SKQ2L10-01S -02S -03S -04SKQ2L12-02S -03S -04SKQ2L16-03S -04S
KQL23-M5 -01S -02SKQL04-M5 -M6 -01S -02SKQL06-M5 -M6 -01S -02S -03SKQL08-01S -02S -03SKQL10-01S -02S -03S -04SKQL12-02S -03S -04SKQL16-03S -04S
Model
KQ2K (White) KQK (Black)
Model
KQ2L (White) KQL (Black)
R1/8R1/4
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2
R1/8R1/4
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2
Release Button, Light grey
Release ButtonBlue
3.2
4
6
8
10
12
16
M5
M5
M5
Basically used in the same way as a male elbow.But also used in 3 dimensional piping to prevent interference of fittings.
<M5>
<R>
Applicabletubing O.D.
mm
Connecting thread
Model
KQ2W (White) KQW (Black)KQ2W23-M5 -01S -02SKQ2W04-M5 -01S -02SKQ2W06-M5 -01S -02S -03SKQ2W08-01S -02S -03SKQ2W10-02S -03S -04SKQ2W12-02S -03S -04SKQ2W16-03S -04S
KQW23-M5 -01S -02SKQW04-M5 -01S -02SKQW06-M5 -01S -02S -03SKQW08-01S -02S -03SKQW10-02S -03S -04SKQW12-02S -03S -04SKQW16-03S -04S
R1/8R1/4
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2
KQ2H/KQH Male Connector KQ2L/KQL Male Elbow
Tubing Female thread hole
KQ2K/KQK 45 Male Elbow KQ2W/KQW Ext. Male Elbow
Series KQ2 One-Touch Fittings
Fittings & Tubing
1418
Tubing Female thread hole
Hexagon Socket Head Male ConnectorThe hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space.
<M5, M6>
<R>
Applicabletubing O.D.
mm
4
6
8
10
12
16
Connecting thread
M5M6
M5M6
KQ2S04-M5 -M6 -01SKQ2S06-M5 -M6 -01S -02SKQ2S08-01S -02S -03SKQ2S10-01S -02S -03S -04SKQ2S12-02S -03S -04SKQ2S16-03S -04S
KQS04-M5 -M6 -01SKQS06-M5 -M6 -01S -02SKQS08-01S -02S -03SKQS10-01S -02S -03S -04SKQS12-02S -03S -04SKQS16-03S -04S
Model
KQ2S( )KQS( )
R1/8
R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2
Release Button, Light grey
Release ButtonBlue
KQ2S/KQS
M5
M5<M5>
<R>
Hex. Socket Head Universal Male Elbow
The hexagon socket in the head is used to tighten the body with a hexagon wrench. Useful in a confined space.
Applicabletubing O.D.
mm
4
6
8
10
12
Connecting thread
KQ2VS04-M5 -01SKQ2VS06-M5 -01S -02SKQ2VS08-01S -02S -03SKQ2VS10-02S -03SKQ2VS12-03S -04S
KQ2VS (White)
R1/8
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2
KQ2VS/KQVS
M5
<M5>
<R>
The hexagon head of the body is used to tighten the body with a box wrench in a confined space.
Applicabletubing O.D.
mm
4
6
8
10
12
16
Connecting thread
KQ2V04-M5 -01SKQ2V06-M5 -01S -02SKQ2V08-01S -02S -03SKQ2V10-02S -03SKQ2V12-03S -04SKQ2V16-03S -04S
KQV04-M5 -01SKQV06-M5 -01S -02SKQV08-01S -02S -03SKQV10-02S -03SKQV12-03S -04SKQV16-03S -04S
Model
KQ2V (White) KQV (Black)
R1/8
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2R3/8R1/2
M5
KQ2V/KQV Universal Male ElbowTo branch the line from the female thread at 90˚ in each direction.
3.2
4
6
8
10
12
16
M5
M5M6
M6M5
<M6>
<R>
Applicabletubing O.D.
mm
Connecting thread
Model
KQ2T (White) KQT (Black)KQ2T23-M5 -01S -02SKQ2T04-M5 -M6 -01S -02SKQ2T06-M5 -M6 -01S -02S -03SKQ2T08-01S -02S -03SKQ2T10-01S -02S -03S -04SKQ2T12-02S -03S -04SKQ2T16-03S -04S
KQT23-M5 -01S -02SKQT04-M5 -M6 -01S -02SKQT06-M5 -M6 -01S -02S -03SKQT08-01S -02S -03SKQT10-01S -02S -03S -04SKQT12-02S -03S -04SKQT16-03S -04S
R1/8R1/4
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2
KQ2T/KQT Male Branch Tee
One-Touch Fittings Series KQ2
Fitti
ngs
& T
ubin
g
1419FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Tubing Female thread hole
To branch the line from the female thread in the same direction and at 90˚.
3.2
4
6
8
10
12
16
M5
M5M6
M6M5
<M5, M6>
Applicabletubing O.D.
mm
Connecting thread
Model
KQ2Y (White) KQY (Black)KQ2Y23-M5 -01S -02SKQ2Y04-M5 -M6 -01S -02SKQ2Y06-M5 -M6 -01S -02S -03SKQ2Y08-01S -02S -03SKQ2Y10-01S -02S -03S -04SKQ2Y12-02S -03S -04SKQ2Y16-03S -04S
KQY23-M5 -01S -02SKQY04-M5 -M6 -01S -02SKQY06-M5 -M6 -01S -02S -03SKQY08-01S -02S -03SKQY10-01S -02S -03S -04SKQY12-02S -03S -04SKQY16-03S -04S
<R>
R1/8R1/4
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2
KQ2Y/KQY Male Run Tee KQ2U/KQU Union “Y”
3.2
4
6
8
10
12
16
M5
M5M6
M5M6
To branch tubing in the same direction.
<M5, M6>
<R>
Applicabletubing O.D.
mm
Connecting thread
Model
KQ2U (White) KQU (Black)KQ2U23-M5 -01S -02SKQ2U04-M5 -M6 -01S -02SKQ2U06-M5 -M6 -01S -02S -03SKQ2U08-01S -02S -03SKQ2U10-02S -03S -04SKQ2U12-02S -03S -04SKQ2U16-03S -04S
KQU23-M5 -01S -02SKQU04-M5 -M6 -01S -02SKQU06-M5 -M6 -01S -02S -03SKQU08-01S -02S -03SKQU10-02S -03S -04SKQU12-02S -03S -04SKQU16-03S -04S
R1/8R1/4
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2
KQ2VD/KQVD Double Uni. Male Elbow
To branch the line from the female thread at right angles. 2 individual parts rotate freely.
Applicabletubing O.D.
mm
Connecting thread
4
6
8
10
12
Model
KQ2VD (White) KQVD (Black)KQ2VD04-01S -02S -03SKQ2VD06-01S -02S -03SKQ2VD08-01S -02S -03S -04SKQ2VD10-02S -03S -04SKQ2VD12-02S -03S -04S
KQVD04-01S -02S -03SKQVD06-01S -02S -03SKQVD08-01S -02S -03S -04SKQVD10-02S -03S -04SKQVD12-02S -03S -04S
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2
Triple Universal Male ElbowKQ2VT/KQVT
4
6
8
10
12
KQ2VT04-01S -02S -03SKQ2VT06-01S -02S -03SKQ2VT08-01S -02S -03S -04SKQ2VT10-02S -03S -04SKQ2VT12-02S -03S -04S
KQVT04-01S -02S -03SKQVT06-01S -02S -03SKQVT08-01S -02S -03S -04SKQVT10-02S -03S -04SKQVT12-02S -03S -04S
To branch line from the female thread into 3 directions at right angles.3 individual parts rotate freely.
Applicabletubing O.D.
mm
Connecting thread
Model
KQ2VT (White) KQVT (Black)
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2
Branch Universal Male Elbow KQ2Z/KQZThe hexagon head of the body is used to tighten the body with a box wrench. Used to branch the line. Elbow union for piping.
<M5>
<R>
Applicabletubing O.D.
mm
4
6
8
10
12
Connecting thread
M5 KQ2Z04-M5 -01SKQ2Z06-01S -02S -03SKQ2Z08-01S -02S -03SKQ2Z10-02S -03SKQ2Z12-03S -04S
KQZ04-M5 -01SKQZ06-01S -02S -03SKQZ08-01S -02S -03SKQZ10-02S -03SKQZ12-03S -04S
Model
KQ2Z (White) KQZ (Black)
R1/8R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R3/8R1/2
To branch the line from the female thread into 4 tubes in the same direction.
KQ2UD/KQUD Delta Branch “Y”
4
6
Applicabletubing O.D.
mm
Connecting thread
Model
KQ2UD (White) KQUD (Black)KQ2UD04-01S -02SKQ2UD06-01S -02S
KQUD04-01S -02SKQUD06-01S -02S
R1/8R1/4R1/8R1/4
Series KQ2 One-Touch Fittings
Fittings & Tubing
1420
Tubing Female thread hole
KQ2LU/KQLU KQ2ZD/KQZD
KQ2ZT/KQZT KQ2D/KQD Male Delta Union
4
6
8
10
12
M5
M5M6
M6KQ2LU04-M5 -M6 -01S -02SKQ2LU06-M5 -M6 -01S -02S -03SKQ2LU08-01S -02S -03SKQ2LU10-02S -03S -04SKQ2LU12-02S -03S -04S
KQLU04-M5 -M6 -01S -02SKQLU06-M5 -M6 -01S -02S -03SKQLU08-01S -02S -03SKQLU10-02S -03S -04SKQLU12-02S -03S -04S
To branch tubing at a right angle from the female thread.
<M5, M6>
<R>
Applicabletubing O.D.
mm
Connecting thread
Model
KQ2LU (White) KQLU (Black)
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
Branch Union ElbowTo branch the line from the female thread into 4 tubes at right angles. 2 individual parts rotate freely.
Applicabletubing O.D.
mm
Connecting thread
4
6
8
10
12
KQ2ZD04-01S -02S -03SKQ2ZD06-01S -02S -03SKQ2ZD08-01S -02S -03S -04SKQ2ZD10-02S -03S -04SKQ2ZD12-02S -03S -04S
KQZD04-01S -02S -03SKQZD06-01S -02S -03SKQZD08-01S -02S -03S -04SKQZD10-02S -03S -04SKQZD12-02S -03S -04S
Model
KQ2ZD (White) KQZD (Black)
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2
Double Branch Universal Male Elbow
4
6
8
10
12
To branch the line from the female thread into 6 tubes at right angles. 3 individual parts rotate freely.
Applicabletubing O.D.
mm
Connecting thread
Model
KQ2ZT (White) KQZT (Black)KQ2ZT04-01S -02S -03SKQ2ZT06-01S -02S -03SKQ2ZT08-01S -02S -03S -04SKQ2ZT10-02S -03S -04SKQ2ZT12-02S -03S -04S
KQZT04-01S -02S -03SKQZT06-01S -02S -03SKQZT08-01S -02S -03S -04SKQZT10-02S -03S -04SKQZT12-02S -03S -04S
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2
Triple Branch UniversalMale Elbow
To branch the line from the female thread into 2 directions at right angles.
4
6
8
10
12
M5
M5M6
M6
<M5, M6>
Applicabletubing O.D.
mm
Connecting thread
Model
KQ2D (White) KQD (Black)KQ2D04-M5 -M6 -01S -02SKQ2D06-M5 -M6 -01S -02S -03SKQ2D08-01S -02S -03SKQ2D10-02S -03S -04SKQ2D12-02S -03S -04S
KQD04-M5 -M6 -01S -02SKQD06-M5 -M6 -01S -02S -03SKQD08-01S -02S -03SKQD10-02S -03S -04SKQD12-02S -03S -04S
<R>
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
One-Touch Fittings Series KQ2
Fitti
ngs
& T
ubin
g
1421FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Tubing Tubing
Bulkhead Union
KQ2H/KQH Straight Union KQ2LE/KQLE
KQ2E/KQE KQ2T/KQT Union Tee
KQ2L/KQL Union Elbow KQ2U/KQU Union “Y”
KQ2H/KQH KQ2T/KQT Diff. Dia. Tee
Bulkhead Male ElbowTo connect tubings in the same direction.
Applicable tubing O.D.mm
3.2468
101216
KQ2H23-00KQ2H04-00KQ2H06-00KQ2H08-00KQ2H10-00KQ2H12-00KQ2H16-00
KQH23-00KQH04-00KQH06-00KQH08-00KQH10-00KQH12-00KQH16-00
Model
KQ2H (White) KQH (Black)
To connect tubings through a panel and change the tubing entry by 90˚.
Applicable tubing O.D.mm
468
1012
KQ2LE04-00KQ2LE06-00KQ2LE08-00KQ2LE10-00KQ2LE12-00
KQLE04-00KQLE06-00KQLE08-00KQLE10-00KQLE12-00
Model
KQ2LE (White) KQLE (Black)
To connect tubing through a panel.
Applicable tubing O.D.mm
3.2468101216
KQ2E23-00KQ2E04-00KQ2E06-00KQ2E08-00KQ2E10-00KQ2E12-00KQ2E16-00
KQE23-00KQE04-00KQE06-00KQE08-00KQE10-00KQE12-00KQE16-00
Model
KQ2E( ) KQE( )Release button,Light grey
Release buttonBlue
To branch tubing into 2 directions each at 90˚ to the original one.
Applicable tubing O.D.mm
3.2468101216
KQ2T23-00KQ2T04-00KQ2T06-00KQ2T08-00KQ2T10-00KQ2T12-00KQ2T16-00
KQT23-00KQT04-00KQT06-00KQT08-00KQT10-00KQT12-00KQT16-00
Model
KQ2T (White) KQT (Black)
3.2468
101216
To connect tubing at right angles to each other.
Applicable tubing O.D.mm
Model
KQ2L (White) KQL (Black)KQ2L23-00KQ2L04-00KQ2L06-00KQ2L08-00KQ2L10-00KQ2L12-00KQ2L16-00
KQL23-00KQL04-00KQL06-00KQL08-00KQL10-00KQL12-00KQL16-00
To branch tubing in the same direction.
Applicable tubing O.D.mm
3.2468
101216
KQ2U23-00KQ2U04-00KQ2U06-00KQ2U08-00KQ2U10-00KQ2U12-00KQ2U16-00
KQU23-00KQU04-00KQU06-00KQU08-00KQU10-00KQU12-00KQU16-00
Model
KQ2U (White) KQU (Black)
Different Dia. Straight
To connect tubings of different diameters.
Applicable tubing O.D.mm
3.2468
1012
b468
101216
KQ2H23-04KQ2H04-06KQ2H06-08KQ2H08-10KQ2H10-12KQ2H12-16
KQH23-04KQH04-06KQH06-08KQH08-10KQH10-12KQH12-16
Model
KQ2H (White) KQH (Black)ba a
To branch the tubing into two at a right angle and reducethe resulting branches in size.
Applicable tubing O.D.mm
a3.24681012
b468
101216
KQ2T23-04KQ2T04-06KQ2T06-08KQ2T08-10KQ2T10-12KQ2T12-16
Model
KQ2T (White)
KQT23-04KQT04-06KQT06-08KQT08-10KQT10-12KQT12-16
KQT (Black)
2- a
b
Series KQ2 One-Touch Fittings
Fittings & Tubing
1422
Tubing Tubing
KQ2LU/KQLUTo connect tubing in the same direction as well as to branch it into another smaller tubing at 90˚.
Applicable tubing O.D.mm
a681012
b46810
KQ2T06-04KQ2T08-06KQ2T10-08KQ2T12-10
Model
KQ2T (White)
2- a
b
To branch tubing into 2 smaller tubes in the same direction as the original one.
Applicable tubing O.D.mm
a3.24681012
b468101216
KQ2U23-04KQ2U04-06KQ2U06-08KQ2U08-10KQ2U10-12KQ2U12-16
KQU23-04KQU04-06KQU06-08KQU08-10KQU10-12KQU12-16
Model
KQ2U (White) KQU (Black)a a
b
Different Dia. DoubleUnion "Y"
To branch tubing into 4 smaller tubes in the same direction as the original one.
Applicable tubing O.D.mm
a46
b68
KQ2UD04-06KQ2UD06-08
KQUD04-06KQUD06-08
Model
KQ2UD (White) KQUD (Black)
4- a
b
4681012
Applicable tubing O.D.mm
To branch a tube at a right angle into two tubes.
Model
KQ2LU (White) KQLU (Black)KQ2LU04-00KQ2LU06-00KQ2LU08-00KQ2LU10-00KQ2LU12-00
KQLU04-00KQLU06-00KQLU08-00KQLU10-00KQLU12-00
To connect 3 tubes at right angles with each other.
Applicable tubing O.D.mm
468
1012
KQ2D04-00KQ2D06-00KQ2D08-00KQ2D10-00KQ2D12-00
KQD04-00KQD06-00KQD08-00KQD10-00KQD12-00
Model
KQ2D (White) KQD (Black)
To branch tubing into 4 directions.
Applicable tubing O.D.mm
4681012
KQ2TW04-00KQ2TW06-00KQ2TW08-00KQ2TW10-00KQ2TW12-00
Model
KQ2TW (White)
To connect 4 tubes at right angles with 2 smaller tubes on both sides.Applicable tubing O.D.
mma6810
b8
1012
KQ2TX06-08KQ2TX08-10KQ2TX10-12
Model
KQ2TX (White)
b ba
a
KQT (Black) is manufactured as a made to order.
This model is not available with black body specifications.
This model is not available with black body specifications.
To branch tubing into smaller tubing in 3 directions.Applicable tubing O.D.
mma6810
b81012
KQ2TY06-08KQ2TY08-10KQ2TY10-12
Model
KQ2TY (White)
3- a
b
This model is not available with black body specifications.
Branch Union Elbow KQ2T/KQT
KQ2D/KQD Delta Union KQ2U/KQU
Different Diameter Tee
Diff. Dia. Union “Y”
KQ2TW Cross KQ2UD/KQUD
KQ2TX Different Diameter Cross KQ2TY Different Diameter Cross
One-Touch Fittings Series KQ2
Fitti
ngs
& T
ubin
g
1423FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Ext. Plug-in Elbow
KQ2L/KQL Plug-in Elbow
KQ2L/KQL Reducer Elbow
Tubing
KQ2W/KQW
KQ2U/KQU Plug-in “Y”
KQ2R/KQR Plug-in Reducer KQ2X/KQX Diff. Dia. Plug-in “Y”
One-touch fittings
To change the tubing direction from a one-touch fitting by 90˚.
Applicabletubing O.D.
mm3.2468101216
Fitting size
3.2468101216
KQ2L23-99KQ2L04-99KQ2L06-99KQ2L08-99KQ2L10-99KQ2L12-99KQ2L16-99
KQL23-99KQL04-99KQL06-99KQL08-99KQL10-99KQL12-99KQL16-99
Model
KQ2L (White) KQL (Black)
To change the tubing direction from a one-touch fitting by 90˚. Applicable to 3 dimensional piping when used with a plug-in elbow.
Applicabletubing O.D.
mm3.24681012
Fitting size
3.24681012
KQ2W23-99KQ2W04-99KQ2W06-99KQ2W08-99KQ2W10-99KQ2W12-99
KQW23-99KQW04-99KQW06-99KQW08-99KQW10-99KQW12-99
Model
KQ2W (White) KQW (Black)
To connect to a smaller one-touch fitting.
Applicabletubing O.D.
mmFitting size
3.2
4
12
10
8
6
468
1048
10121012121616
KQ2R23-04KQ2R04-06 -08 -10KQ2R06-04 -08 -10 -12KQ2R08-10 -12KQ2R10-12 -16KQ2R12-16
KQR23-04KQR04-06 -08 -10KQR06-04 -08 -10 -12KQR08-10 -12KQR10-12 -16KQR12-16
Model
KQ2R (White) KQR (Black)
To change the tubing direction from a one-touch fitting by 90˚ as well as to connect to tubing of a smaller diameter.
Applicabletubing O.D.
mm3.2
4
6
8
1012
Fitting size
46881010121216
KQ2L23-04KQ2L04-06 -08KQ2L06-08 -10KQ2L08-10 -12KQ2L10-12KQ2L12-16
KQL23-04KQL04-06 -08KQL06-08 -10KQL08-10 -12KQL10-12KQL12-16
Model
KQ2L (White) KQL (Black)
To branch the line from a one-touch fitting into tubing in the same direction.
Applicabletubing O.D.
mmFitting size
3.2468
101216
3.2468101216
KQ2U23-99KQ2U04-99KQ2U06-99KQ2U08-99KQ2U10-99KQ2U12-99KQ2U16-99
KQU23-99KQU04-99KQU06-99KQU08-99KQU10-99KQU12-99KQU16-99
Model
KQ2U (White) KQU (Black)
To branch the line from a one-touch fitting into tubing of a smaller diameter in the same direction.
Applicabletubing O.D.
mmFitting size
46810
681012
KQ2X04-06KQ2X06-08KQ2X08-10KQ2X10-12
KQX04-06KQX06-08KQX08-10KQX10-12
Model
KQ2X (White) KQX (Black)
To branch the line from a one-touch fitting into 4 tubes of a smaller diameter in the same direction.
Applicabletubing O.D.
mmFitting size
46
68
KQ2XD04-06KQ2XD06-08
KQXD04-06KQXD06-08
Model
KQ2XD (White) KQXD (Black)
KQ2XD/KQXD Double Branch “Y”
Series KQ2 One-Touch Fittings
Fittings & Tubing
1424
Tubing Male Thread
To pipe from the male threaded portion of a pressure gauge, etc.
Applicabletubing O.D.
mm
4
6
8
10
12
16
Connecting thread
KQ2F04-01 -02KQ2F06-01 -02 -03KQ2F08-01 -02 -03KQ2F10-02 -03KQ2F12-02 -03 -04KQ2F16-03 -04
KQF04-01 -02KQF06-01 -02 -03KQF08-01 -02 -03KQF10-02 -03KQF12-02 -03 -04KQF16-03 -04
Model
KQ2F( ) KQF( )
3.2
4
6
8
10
12
16
Used for trunk connection between tubing and a male thread installed through a panel.
Applicabletubing O.D.
mm
Model
KQ2E( )KQE( )KQ2E23-02KQ2E04-01 -02KQ2E06-01 -02 -03KQ2E08-01 -02 -03KQ2E10-02 -03KQ2E12-03 -04KQ2E16-03 -04
KQE23-02KQE04-01 -02KQE06-01 -02 -03KQE08-01 -02 -03KQE10-02 -03KQE12-03 -04KQE16-03 -04
Connecting thread
To pipe from the male threaded at the right angle.
<M5, M6>
<Rc>
Applicabletubing O.D.
mmM5M6
M5M6
4
6
8
10
12
Connecting thread
KQ2LF04-M5 -M6 -01 -02KQ2LF06-M5 -M6 -01 -02 -03KQ2LF08-01 -02 -03KQ2LF10-02 -03 -04KQ2LF12-02 -03 -04
KQLF04-M5 -M6 -01 -02KQLF06-M5 -M6 -01 -02 -03KQLF08-01 -02 -03KQLF10-02 -03 -04KQLF12-02 -03 -04
Model
KQ2LF (White) KQLF (Black)
4
6
8
10
12
M5
M5
To connect a line from a male and female thread in the same direction as well as to branch it into 2 pipes at a right angle. Multiplex connections possible.
<M5>
<R, Rc>
Applicabletubing O.D.
mm
Connecting thread
Model
KQ2VF (White) KQVF (Black)KQ2VF04-M5 -01SKQ2VF06-M5 -01S -02SKQ2VF08-01S -02S -03SKQ2VF10-02S -03SKQ2VF12-03S -04S
KQVF04-M5 -01SKQVF06-M5 -01S -02SKQVF08-01S -02S -03SKQVF10-02S -03SKQVF12-03S -04S
Rc1/8Rc1/4Rc1/8Rc1/4Rc3/8Rc1/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/2Rc3/8Rc1/2
Rc1/4Rc1/8Rc1/4Rc1/8Rc1/4Rc3/8Rc1/8Rc1/4Rc3/8Rc1/4Rc3/8Rc3/8Rc1/2Rc3/8Rc1/2
Rc1/8Rc1/4
Rc1/8Rc1/4Rc3/8Rc1/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/2Rc1/4Rc3/8Rc1/2
R/Rc1/8
R/Rc1/8R/Rc1/4R/Rc1/8R/Rc1/4R/Rc3/8R/Rc1/4R/Rc3/8R/Rc3/8R/Rc1/2
To branch a line from a male or female thread in the same direction and at a right angle. Multiplex connections possible.
<M5>
Applicabletubing O.D.
mmM5
4
6
8
10
12
Connecting thread
KQ2ZF04-M5 -01SKQ2ZF06-01S -02SKQ2ZF08-01S -02SKQ2ZF10-02S -03SKQ2ZF12-03S -04S
KQZF04-M5 -01SKQZF06-01S -02SKQZF08-01S -02SKQZF10-02S -03SKQZF12-03S -04S
Model
KQ2ZF (White) KQZF (Black)
<R, Rc>
R/Rc1/8R/Rc1/8R/Rc1/4R/Rc1/8R/Rc1/4R/Rc1/4R/Rc3/8R/Rc3/8R/Rc1/2
Release button, Light grey
Release buttonBlue
Release button, Light grey
Release buttonBlue
KQ2F/KQF Female Connector KQ2LF/KQLF Female Elbow
KQ2E/KQE Bulkhead Female Conn. KQ2VF/KQVF Uni. Female Elbow
KQ2ZF/KQZF Branch Uni. Female Elbow
One-Touch Fittings Series KQ2
Fitti
ngs
& T
ubin
g
1425FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Accessories
4
3.2
6
8101216
Attached to release buttons for various applications to distinguish them by colour.
Applicabletubing O.D.
mmModel Application
To connect 2 one-touch fittings.
Applicable fitting size
468101216
KQ2N04-99KQ2N06-99KQ2N08-99KQ2N10-99KQ2N12-99KQ2N16-99
KQN04-99KQN06-99KQN08-99KQN10-99KQN12-99KQN16-99
Model
KQ2N (White) KQN (Black)
KQ2C-04m
KQ2C-04A-m
KQ2C-04B-m
KQ2C-06m
KQ2C-06A-m
KQ2C-06B-m
KQ2C-08mKQ2C-10mKQ2C-12mKQ2C-16m
KQ2C-01mKQ2C-01A-m
KQ2C-01B-m
KQH, KQ2H04-M5, M6KQS, KQ2S04-M5, M6
KQH, KQ2H23-M5
KQL, KQ2L04-M5, M6KQT, KQ2T04-M5, M6KQY, KQ2Y04-M5, M6
KQL, KQ2L23-M5KQT, KQ2T23-M5KQY, KQ2Y23-M5
KQH, KQ2H06-M5, M6KQS, KQ2S06-M5, M6
KQL, KQ2L06-M5, M6KQT, KQ2T06-M5, M6KQY, KQ2Y06-M5, M6
To connect one-touch fittings of different sizes.
Applicable fitting size
a468
1012
b68
101216
KQ2N04-06KQ2N06-08KQ2N08-10KQ2N10-12KQ2N12-16
KQN04-06KQN06-08KQN08-10KQN10-12KQN12-16
Model
KQ2N (White) KQN (Black)
To plug unused tubing.
Applicable tubing O.D.mm
468
101216
KQ2C04-00KQ2C06-00KQ2C08-00KQ2C10-00KQ2C12-00KQ2C16-00
KQC04-00KQC06-00KQC08-00KQC10-00KQC12-00KQC16-00
Model
KQ2C (White) KQC (Black)
To plug unused one-touch fittings KQ2P (White), KQP (Blue).
Applicable fitting size
3.2468
101216
KQ2P-23KQ2P-04KQ2P-06KQ2P-08KQ2P-10KQ2P-12KQ2P-16
KQP-23KQP-04KQP-06KQP-08KQP-10KQP-12KQP-16
Model
KQ2P (White) KQP (Black)
(m) in the above table is the colour of the cap.See list bellow:B (Black), R (Red), YR (Orange), BR (Brown), Y (Yellow),G (Green), CB (Sky blue), GR (Gray), W (White), BU (Blue)
Connecting thread
To connect a one-touch fitting and R female thread.
Applicablefittingsize
4
6
8
10
KQ2N04-M5 -01SKQ2N06-M5 -01S -02SKQ2N08-02S -03SKQ2N10-03S
KQN04-M5 -01SKQN06-M5 -01S -02SKQN08-02S -03SKQN10-03S
Model
KQ2N (White) KQN (Black)
M5
M5
ba
R1/8
R1/8R1/4R1/4R3/8R3/8
KQ2P/KQP Plug KQ2C/KQC Tubing Cap
KQ2N/KQN Nipple
KQ2C Colour Cap
KQ2N/KQN Diff. Dia. Nipple
KQ2N/KQN Adapter
Series KQ2 One-touch fittings with G Type Connection Threads
Fittings & Tubing
1426
One-touch Fittings (Whith G Type Connection Threads)Series KQ2
Applicable tubing: Dimensions mmWith cylindrical threading/tapping: G1/8’’, G1/4’’, G3/8’’, G1/2’’
Features
G
Gasket
Female thread
Male thread
G Thread.
One-touch connection and release.
Possible to use in vacuum to -100kPa.
The male thread for piping drasticallycuts piping manhours.
Suitable foe use with port thrads conformingto ISO1179 and ISO16030.
The seal gasket on the male thread for piping eliminates the need for pipe tape.
Fluid
Max. operating pressure
Operating vacuum pressure
Proof pressure
Ambient and fluid temperature
Thread
Air, Water Note 2)
1.0 MPa Note 3)
–100 kPa
3.0 MPa
–5 to 60C, In case of water: 0 to 40C (No freezing)
JIS B0207 (EN ISO228)
JIS B0211, Class 2 (Metric fine thread)
Mounting
Nut
Applicable Tubing
Specifications
Note 2) The surge pressure must be under the maximum operating pressure.Note 3) The amount of leakage is not zero, and so the use for holding vacuum such as a leak tester should be avoided.
Principal Parts Material
Tubing material
Tubing O.D.
Body C3604BD, PBTC3604BD (Thread portion)
Stainless steel 304Stainless steel 304, C3604BD, PBT
POMNBR
StudChuckGuideCollet, Release buttonSeal, O-ring
Stainless steel 304, NBRGasket
Note 1) The soft nylon tube is not available with water.
FEP,PFA, Nylon, Soft nylon (Note1), Polyurethane
ø4, ø6, ø8, ø10, ø12, ø16
Product’s Color
Series Body Release buttonSeries KQ2 White Light grey
Raco
ords
et t
ubes
/A
uxili
aire
s de
lign
e
One-touch fittings with G Type Connection Threads Series KQ2
Fitti
ngs
& T
ubin
g
1427FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
4
6
8
10
12
16
1 8
1 8
1 81 4
1 43 8
1 43 8
KQ2H04-G01
KQ2H06-G01
KQ2H08-G01KQ2H08-G02
KQ2H10-G02KQ2H10-G03
KQ2H12-G02KQ2H12-G03
1 4 KQ2H04-G02
1 8 KQ2H10-G01
1 4
3 8
KQ2H06-G02
KQ2H08-G03
3 8 KQ2H06-G03
1 2 KQ2H10-G04
1 2 KQ2H12-G043 8 KQ2H16-G031 2 KQ2H16-G04
4
6
8
10
12
16
1 8
1 8
1 81 4
1 43 8
3 8
1 43 8
KQ2L04-G01
KQ2L06-G01
KQ2L08-G01KQ2L08-G02
KQ2L10-G02KQ2L10-G03
KQ2L12-G02KQ2L12-G03
1 4 KQ2L04-G02
1 8 KQ2L10-G01
1 4
3 8
KQ2L06-G02
KQ2L08-G03
3 8 KQ2L06-G03
1 2 KQ2L10-G04
1 2
1 2
KQ2L12-G04KQ2L16-G03KQ2L16-G04
Male Branch Tee:
KQ2T
4
6
8
10
12
16
1 8
1 8
1 81 4
1 43 8
1 43 8
KQ2T04-G01
KQ2T06-G01
KQ2T08-G01KQ2T08-G02
KQ2T10-G02KQ2T10-G03
KQ2T12-G02KQ2T12-G03
1 4 KQ2T04-G02
1 8 KQ2T10-G01
1 4
3 8
KQ2T06-G02
KQ2T08-G03
3 8 KQ2T06-G03
1 2 KQ2T10-G04
1 2 KQ2T12-G043 8 KQ2T16-G031 2 KQ2T16-G04
Male Connector:
KQ2HMale Elbow:
KQ2L
Male Run Tee:
KQ2Y
4
6
8
10
12
16
1 8
1 8
1 81 4
1 43 8
1 43 8
KQ2Y04-G01
KQ2Y06-G01
KQ2Y08-G01KQ2Y08-G02
KQ2Y10-G02KQ2Y10-G03
KQ2Y12-G02KQ2Y12-G03
1 4 KQ2Y04-G02
1 8 KQ2Y10-G01
1 4
3 8
KQ2Y06-G02
KQ2Y08-G03
3 8 KQ2Y06-G03
1 2 KQ2Y10-G04
1 2 KQ2Y12-G043 8 KQ2Y16-G031 2 KQ2Y16-G04
Female Connector:
KQ2F
4
6
8
10
12
1 8
1 8
1 81 4
1 43 81 4
3 8
KQ2F04-G01
KQ2F06-G01
KQ2F08-G01KQ2F08-G02
KQ2F10-G02KQ2F10-G03
KQ2F12-G03KQ2F12-G04
1 4 KQ2F04-G02
1 4
3 8
KQ2F06-G02
KQ2F08-G03
3 8 KQ2F06-G03
1 2
KQ2F12-G02
1 2
KQ2F16-G03KQ2F16-G04
Extended Male Elbow:
KQ2W
4
6
8
10
12
1 8
1 8
1 81 4
1 43 8
1 43 8
KQ2W04-G01
KQ2W06-G01
KQ2W08-G01KQ2W08-G02
KQ2W10-G02KQ2W10-G03
KQ2W12-G02KQ2W12-G03
1 4 KQ2W04-G02
1 4
3 8
KQ2W06-G02
KQ2W08-G03
3 8 KQ2W06-G03
1 2 KQ2W10-G04
1 2 KQ2W12-G0416
3 8
3 81 2
KQ2W16-G03KQ2W16-G0416
Hexagon Socket Head Male Connector:KQ2S
4
6
8
10
12
1 8
1 81 4
1 43 8
1 43 8
KQ2S08-G01KQ2S08-G02
KQ2S10-G02KQ2S10-G03
KQ2S12-G02KQ2S12-G03
1 8 KQ2S04-G01
1 8 KQ2S10-G01
1 4
3 8
KQ2S06-G01
KQ2S08-G03
KQ2S06-G02
1 2 KQ2S10-G04
1 2 KQ2S12-G04
Bulkhead Connector: KQ2E
4
6
8
10
12
1 8
1 8
1 81 4
3 8
3 8
KQ2E04-G01
KQ2E06-G01
KQ2E08-G01KQ2E08-G02
KQ2E10-G03KQ2E12-G03
KQ2E16-G03KQ2E16-G04
1 4 KQ2E04-G02
KQ2E10-G02
1 4
3 8
KQ2E06-G02
KQ2E08-G03
3 8 KQ2E06-G03
1 2 KQ2E12-G04
Universal Male Elbow:
KQ2V4
6
8
10
12
1 81 8
1 81 4
1 43 83 8
KQ2V04-G01KQ2V06-G01
KQ2V08-G01KQ2V08-G02
KQ2V10-G03KQ2V12-G03
KQ2V10-G02
1 4
3 8
KQ2V06-G02
KQ2V08-G03
1 2 KQ2V12-G04
3 81 2
KQ2S16-G03KQ2S16-G04
16
1 43 8
1 2
3 8 KQ2V16-G03KQ2V16-G04
161 2
ModelConnection
threadG
Applicable tubing O.D.
(mm)Model
Connection thread
G
Applicable tubing O.D.
(mm)Model
Connection thread
G
Applicable tubing O.D.
(mm)ModelConnection
threadG
Applicable tubing O.D.
(mm)
ModelConnection
threadG
Applicable tubing O.D.
(mm)Model
Connection thread
G
Applicable tubing O.D.
(mm)Model
Connection thread
G
Applicable tubing O.D.
(mm)Model
Connection thread
G
Applicable tubing O.D.
(mm)
ModelConnection
threadG
Applicable tubing O.D.
(mm)
Series KS/KX Rotary One-Touch Fittings
Fittings & Tubing
1428
Rotary One-Touch Fittings
Applicable Tubing
Series KS/KX
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread: M,R
Fluid
Max. operating pressure
Operating vacuum pressure
Proof pressure
Ambient and fluid temperature
Thread
Air
1.0MPa
–100kPa
3.0MPa
–5 to 60˚C (With no condensation)
JIS B0203 (Taper thread for piping)JIS B0209, Class 2 (Metric coarse thread)
HolderElectroless nickel plating allows copper-free applications.
The special rotary seal minimizes rotating torque and friction.
Low-torque, low-friction operation with oil containing slide bearing.
The ball bearing ensures low-torque rotation.
Series KS: BlueSeries KX: Light greyThe male connector is provided with a tubing rotation prevention mechanism.
Ball bearing
Cassette
Electroless nickel plating allows copper-free applications.Thread sealant is standardized.
Stud
Rotary seal
Slide bearing
Tubing material
Tubing O.D.
Nylon, soft nylon, Polyurethane
ø4, ø6, ø8, ø10, ø12
Applicable tubing O.D.
Rotating torque N·m
Allowable number of rotations S-1
PAT.
Rotary one-touch fittings for low-torque rotation.
Applicable to oscillating and rotating sections of robots etc.
For application requiring copper-free material (Electroless nickel plated)
R1/8 thread sealant is standardized.
Note1)
Rotary sealX ring shape minimizes friction while providing an excellent seal. Seal is fire and shock proof fluorine rubber. It proves against high friction heat in high speed rotation and longer life.
ScraperPrevents chips from entering the bearing parts.
Ball bearingThe ball bearing ensures low-torque rotation. SUS440C improves corrosion resistance.
Series KX (High speed type) construction
Series KS(Standard) * Other specifications are same as those of series KS.
Note1) Take precautions regarding the maximum operating pressure with soft nylon and polyurethane.
ø8
0.0146.7
20
ø6
0.0128.4
20
ø4
0.0068.4
25
ø10
0.0205
16.7
ø12
0.0224.2
16.7Series KS
Series KX
Note1)
Note1) Rotating torque at a 0.5 MPa pressure.
Male Connector
Male Elbow
Rotating Torque / Allowable Number of Rotations
Series KX (Construction)
Rotary One-Touch Fittings Series KS/KX
Fitti
ngs
& T
ubin
g
1429FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
KSH Male Connector
Standard Series KS
KSL Male Elbow
KXH Male Connector KXL Male Elbow
4
6
8
10
12
M5
M5M6
M6
Most common style used to pipe from female thread in the same direction.
<M5, M6>
<R>
Applicabletubing O.D.
mm
Connecting thread
Model
Most common style used to pipe from female thread at a right angle.
<M5, M6>
<R>
Applicabletubing O.D.
mmM5M6
M5M6
4
6
8
10
12
Connecting thread
KSL04-M5 -M6 -01S
KSL06-M5 -M6 -01S -02SKSL08-01S
-02S -03SKSL10-02S
-03S -04SKSL12-03S
-04S
Model
KSH04-M5 -M6 -01S
KSH06-M5 -M6 -01S -02SKSH08-01S
-02S -03SKSH10-02S
-03S -04SKSH12-03S
-04S
4
6
8
10
12
M5
M5M6
M6
Most common style used to pipe from female thread in the same direction.
<M5, M6>
<R>
Applicabletubing O.D.
mm
Connecting thread
Model
Most common style used to pipe from female thread at a right angle.
<M5, M6>
<R>
Applicabletubing O.D.
mmM5M6
M5M6
4
6
8
10
12
Connecting thread
KXL04-M5 -M6 -01S
KXL06-M5 -M6 -01S -02S
KXL08-01S -02S -03S
KXL10-02S -03S -04S
KXL12-03S -04S
Model
KXH04-M5 -M6 -01S
KXH06-M5 -M6 -01S -02SKXH08-01S
-02S -03SKXH10-02S
-03S -04SKXH12-03S
-04S
R1/8
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2
R1/8
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2
R1/8
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2
R1/8
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2
High Speed Type Series KX
Series KM One-Touch Fitting Manifold
Fittings & Tubing
1430
One-Touch Fitting Manifold
Applicable Tubing
Series KM
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread: R, Rc
Model
Fluid
Max. operating pressure
Proof pressure
Ambient and fluid temperature
Thread
Accessory
Air, Water Note1)
1.0MPa
3.0MPa
–5 to 60˚C, In case of water: 0 to 40˚C (With no condensation)
KM11
—
No
KM12
JIS B0203 (Taper thread for piping)
Hexagon socket head plug: 1 pc
KM13
—
No
KM14
JIS B0203 (Taper thread for piping)
No
KM15
—
No
KM16
—
No
Note1) Applicable to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure.
Tubing material
Tubing O.D.
Nylon, Soft nylon, Polyurethane
ø4, ø6, ø8, ø10, ø12
Model
KM11
ø8
ø10
ø12
Rc1/4
Rc3/8
ø6
ø8
ø10
ø6, R1/8
ø6, R1/4
ø6, R3/8
ø8, R1/8
ø8, R1/4
ø8, R3/8
ø10, R1/4
ø10, R3/8
ø10, R1/2
ø6
ø8
ø10
ø4
ø6
One-touch fitting
Port A
One-touch fitting
Port B
Porting
6, 10
KM12 One-touch fitting Rc female thread 6, 10
KM13 One-touch fitting One-touch fitting 3
KM14 One-touch fitting One-touch fittingR male thread 3
KM16 One-touch fitting One-touch fitting 3
KM15 One-touch fittingOne-touch fitting
rod 3
Number of port APort A port sizePort B
Port size ø8
ø6
ø4
Compact and lightweight.
Centralized piping possible.
Rich variation of 40 styles.
One-touch installation.
Threaded or one-touch fitting inlet or plug-in stem.
3,6 or 10 way manifold.
Model
One-Touch Fitting Manifold Series KM
Fitti
ngs
& T
ubin
g
1431FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
KM11
One Touch Fittings Manifold
KM14Applicable tubing O.D.
mmA
4
6
8
B
8
10
12
KM11-04-08-6 -10
KM11-06-10-6 -10
KM11-08-12-6 -10
Model
6106
106
10
Number of port A
A
B
Applicable tubing O.D.mm
A
4
6
8
B6881010
KM13-04-06-3 -08-3KM13-06-08-3 -10-3KM13-08-10-3
Model
33333
Number of port AA
Applicable tubing O.D.
mmConnecting
thread
4
6
8
KM12-04-02-6 -10
KM12-06-02-6 -10
KM12-08-03-6 -10
Model
6106
106
10
Number of port A
A
Applicable tubingO.D. mmA
4
4
6
6
8
B
6
8
8
10
10
KM14-04-06-01S-3 -02S-3 -03S-3KM14-04-08-01S-3
-02S-3 -03S-3KM14-06-08-01S-3
-02S-3 -03S-3KM14-06-10-02S-3
-03S-3 -04S-3KM14-08-10-02S-3
-03S-3 -04S-3
Model
333333333333333
Number of port A
A
B
B
Applicable tubing O.D.mm
A446
B466
KM16-04-04-3KM16-04-06-3KM16-06-06-3
Model
333
Number of port AA
Connecting thread
Applicable tubingO.D. mmA
4
6
8
B6881010
6881010
KM15-04-06-3 -08-3KM15-06-08-3 -10-3KM15-08-10-3
Model
33333
Number of port A
A
B
Applicablefitting size
B
A
Rc1/4
Rc1/4
Rc3/8
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
KM12
KM13
KM15
KM16
Series KF Insert Fittings
Fittings & Tubing
1432
Insert Fittings, Resin sleeve and Brass Sleeve types
Series KF
Specifications
Features
Applicable Tubing
Material / Body, Union nut: BrassMaterial / Sleeve: Resin or Brass
Fluid temperature /
–5 to 15°C (Brass sleeve)
–5 to 60°C (Resin sleeve)
Can be used with steam. (For brass sleeve)
Grease-free
Applicable tubing material / FEP, PFA, Nylon, Soft nylon, Polyurethane, Polyolefin
The insert mechanism provides a reliable retaining force on the tube. Sleeve
Body
Tube can be connected without fully removing the nut.Prevents the tube from disconnecting during piping. Light tightening
torque
Union nut
Note) Please avoid using in a vacuum holding application such as a leak tester, as leakage may occur.
Sleeve materialFluidAmbient and fluid temperatureMaximum operating pressureOperating vacuum pressure Note)
Proof pressureLubricantSeal (Thread portion)
1.0 MPa–101.3 kPa
7.0 MPa (at 60C)Grease-free
None or with sealant
BrassAir, Steam
–5 to 150°C (No freezing)
ResinAir
–5 to 60°C (No freezing)
Series Tubing O.D. Tubing O.D. x I.D. (mm)ø10 x ø6.5 ø10 x ø7.5 ø12 x ø8 ø12 x ø9ø8 x ø6ø8 x ø5ø6 x ø4ø4 x ø2.5
TTSTUTPTPSTHTL
NylonSoft nylon
PolyurethanePolyolefin
Soft polyolefinFEP
Super PFA
Insert Fittings Series KF
Fitti
ngs
& T
ubin
g
1433FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
O.D. I.D.
Connec-tion
thread
ModelApplicabletubing size (mm)
Resin sleeve Brass sleeveR1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2
KFH04-01SKFH04-02SKFH06-01SKFH06-02SKFH06-03SKFH08U-01SKFH08U-02SKFH08U-03SKFH08N-01SKFH08N-02SKFH08N-03SKFH10U-02SKFH10U-03SKFH10U-04SKFH10N-02SKFH10N-03SKFH10N-04SKFH12U-02SKFH12U-03SKFH12U-04SKFH12N-02SKFH12N-03SKFH12N-04S
KFH04B-01SKFH04B-02SKFH06B-01SKFH06B-02SKFH06B-03S
———
KFH08B-01SKFH08B-02SKFH08B-03S
———
KFH10B-02SKFH10B-03SKFH10B-04S
———
KFH12B-02SKFH12B-03SKFH12B-04S
O.D. I.D.
Model
Resin sleeve Brass sleeveR1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2
KFL04-01SKFL04-02SKFL06-01SKFL06-02SKFL06-03SKFL08U-01SKFL08U-02SKFL08U-03SKFL08N-01SKFL08N-02SKFL08N-03SKFL10U-02SKFL10U-03SKFL10U-04SKFL10N-02SKFL10N-03SKFL10N-04SKFL12U-02SKFL12U-03SKFL12U-04SKFL12N-02SKFL12N-03SKFL12N-04S
KFL04B-01SKFL04B-02SKFL06B-01SKFL06B-02SKFL06B-03S
———
KFL08B-01SKFL08B-02SKFL08B-03S
———
KFL10B-02SKFL10B-03SKFL10B-04S
———
KFL12B-02SKFL12B-03SKFL12B-04S
O.D. I.D.
Model
Resin sleeve Brass sleeveR1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2
KFT04-01SKFT04-02SKFT06-01SKFT06-02SKFT06-03SKFT08U-01SKFT08U-02SKFT08U-03SKFT08N-01SKFT08N-02SKFT08N-03SKFT10U-02SKFT10U-03SKFT10U-04SKFT10N-02SKFT10N-03SKFT10N-04SKFT12U-02SKFT12U-03SKFT12U-04SKFT12N-02SKFT12N-03SKFT12N-04S
KFT04B-01SKFT04B-02SKFT06B-01SKFT06B-02SKFT06B-03S
———
KFT08B-01SKFT08B-02SKFT08B-03S
———
KFT10B-02SKFT10B-03SKFT10B-04S
———
KFT12B-02SKFT12B-03SKFT12B-04S
O.D. I.D.
Model
Resin sleeve Brass sleeveR1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2
KFY04-01SKFY04-02SKFY06-01SKFY06-02SKFY06-03SKFY08U-01SKFY08U-02SKFY08U-03SKFY08N-01SKFY08N-02SKFY08N-03SKFY10U-02SKFY10U-03SKFY10U-04SKFY10N-02SKFY10N-03SKFY10N-04SKFY12U-02SKFY12U-03SKFY12U-04SKFY12N-02SKFY12N-03SKFY12N-04S
KFY04B-01SKFY04B-02SKFY06B-01SKFY06B-02SKFY06B-03S
———
KFY08B-01SKFY08B-02SKFY08B-03S
———
KFY10B-02SKFY10B-03SKFY10B-04S
———
KFY12B-02SKFY12B-03SKFY12B-04S
ø2.5
ø4
ø5
ø6
ø6.5
ø7.5
ø8
ø9
ø2.5
ø4
ø5
ø6
ø6.5
ø7.5
ø8
ø9
ø2.5
ø4
ø5
ø6
ø6.5
ø7.5
ø8
ø9
ø2.5
ø4
ø5
ø6
ø6.5
ø7.5
ø8
ø9
ø4
ø6
ø8
ø10
ø12
ø4
ø6
ø8
ø10
ø12
ø4
ø6
ø8
ø10
ø12
ø4
ø6
ø8
ø10
ø12
KFL Male ElbowUsed to pipe tube at right angles to a female thread. Most general type
KFY Male Run TeeUsed to pipe a branch line at right angles and in the same direction from a female thread.
Connec-tion
thread
Applicabletubing size (mm)
Connec-tion
thread
Applicabletubing size (mm)
Connec-tion
thread
Applicabletubing size (mm)
KFH Male ConnectorUsed to pipe tube in the same direction as a female thread. Most general type
KFT Male Branch TeeUsed to pipe a branch line at right angles in both directions from a female thread.
Insert Fittings
Series KF Insert Fittings
Fittings & Tubing
1434
Insert Fittings
O.D. I.D.
Model
Resin sleeve Brass sleeveR1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2
KFV04-01SKFV04-02SKFV06-01SKFV06-02SKFV06-03SKFV08U-01SKFV08U-02SKFV08U-03SKFV08N-01SKFV08N-02SKFV08N-03SKFV10U-02SKFV10U-03SKFV10U-04SKFV10N-02SKFV10N-03SKFV10N-04SKFV12U-02SKFV12U-03SKFV12U-04SKFV12N-02SKFV12N-03SKFV12N-04S
KFV04B-01SKFV04B-02SKFV06B-01SKFV06B-02SKFV06B-03S
———
KFV08B-01SKFV08B-02SKFV08B-03S
———
KFV10B-02SKFV10B-03SKFV10B-04S
———
KFV12B-02SKFV12B-03SKFV12B-04S
O.D. I.D.
ModelApplicabletubing size (mm)
Resin sleeve Brass sleeve
ø6ø6.5
KFH04-00KFH06-00KFH08U-00KFH08N-00KFH10U-00KFH10N-00KFH12U-00KFH12N-00
KFH04B-00KFH06B-00
—KFH08B-00
—KFH10B-00
—KFH12B-00
O.D. I.D.
ModelApplicabletubing size (mm)
Resin sleeve Brass sleeveKFT04-00KFT06-00KFT08U-00KFT08N-00KFT10U-00KFT10N-00KFT12U-00KFT12N-00
KFT04B-00KFT06B-00
—KFT08B-00
—KFT10B-00
—KFT12B-00
ø2.5
ø4
ø5
ø6
ø6.5
ø7.5
ø8
ø9
ø2.5ø4ø5
ø7.5ø8ø9
ø2.5ø4ø5ø6
ø6.5ø7.5ø8ø9
ø4
ø6
ø8
ø10
ø12
ø4ø6
ø8
ø10
ø12
ø4ø6
ø8
ø10
ø12
Swivel Elbow Used to pipe tube at right angles to a female thread. Can be swiveled in any direction.
Union TeeUsed to pipe tubes in both 90 directions.
Straight UnionUsed to pipe tubes in the same direction.
Connec-tion
thread
Applicabletubing size (mm)
O.D. I.D.
Model
Resin sleeve Brass sleeveR1/4R1/4R3/8
R1/4
R1/4
R1/4
KFF04B-02KFF06B-02KFF06B-03
—KFF08B-02
—KFF10B-02
—KFF12B-02
O.D. I.D.
Model
Resin sleeve Brass sleeveø2.5
ø4
ø5ø6
ø6.5ø7.5ø8ø9
ø4ø5ø6
ø6.5ø7.5ø8ø9
ø4
ø6
ø8
ø10
ø12
ø6
ø8
ø10
ø12
R1/4
R3/8
R3/8
R3/8
KFE06-02KFE08U-03KFE08N-03KFE10U-03KFE10N-03KFE12U-03KFE12N-03
KFE06B-02—
KFE08B-03—
KFE10B-03—
KFE12B-03
KFF Female ConnectorUsed to pipe tube from a male thread such as pressure gauge.
KFE Bulkhead Connector Used to pipe tube to a male thread.
KFF04-02KFF06-02KFF06-03KFF08U-02KFF08N-02KFF10U-02KFF10N-02KFF12U-02KFF12N-02
Connec-tion
thread
Applicabletubing size (mm)
Connec-tion
thread
Applicabletubing size (mm)
Insert Fittings Series KF
Fitti
ngs
& T
ubin
g
1435FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Insert Fittings
O.D. I.D.
Model
Resin sleeve Brass sleeveR1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2
KFV04-01SKFV04-02SKFV06-01SKFV06-02SKFV06-03SKFV08U-01SKFV08U-02SKFV08U-03SKFV08N-01SKFV08N-02SKFV08N-03SKFV10U-02SKFV10U-03SKFV10U-04SKFV10N-02SKFV10N-03SKFV10N-04SKFV12U-02SKFV12U-03SKFV12U-04SKFV12N-02SKFV12N-03SKFV12N-04S
KFV04B-01SKFV04B-02SKFV06B-01SKFV06B-02SKFV06B-03S
———
KFV08B-01SKFV08B-02SKFV08B-03S
———
KFV10B-02SKFV10B-03SKFV10B-04S
———
KFV12B-02SKFV12B-03SKFV12B-04S
O.D. I.D.
ModelApplicabletubing size (mm)
Resin sleeve Brass sleeve
ø6ø6.5
KFH04-00KFH06-00KFH08U-00KFH08N-00KFH10U-00KFH10N-00KFH12U-00KFH12N-00
KFH04B-00KFH06B-00
—KFH08B-00
—KFH10B-00
—KFH12B-00
O.D. I.D.
ModelApplicabletubing size (mm)
Resin sleeve Brass sleeveKFT04-00KFT06-00KFT08U-00KFT08N-00KFT10U-00KFT10N-00KFT12U-00KFT12N-00
KFT04B-00KFT06B-00
—KFT08B-00
—KFT10B-00
—KFT12B-00
ø2.5
ø4
ø5
ø6
ø6.5
ø7.5
ø8
ø9
ø2.5ø4ø5
ø7.5ø8ø9
ø2.5ø4ø5ø6
ø6.5ø7.5ø8ø9
ø4
ø6
ø8
ø10
ø12
ø4ø6
ø8
ø10
ø12
ø4ø6
ø8
ø10
ø12
Swivel Elbow Used to pipe tube at right angles to a female thread. Can be swiveled in any direction.
Union TeeUsed to pipe tubes in both 90 directions.
Straight UnionUsed to pipe tubes in the same direction.
Connec-tion
thread
Applicabletubing size (mm)
O.D. I.D.
Model
Resin sleeve Brass sleeveR1/4R1/4R3/8
R1/4
R1/4
R1/4
KFF04B-02KFF06B-02KFF06B-03
—KFF08B-02
—KFF10B-02
—KFF12B-02
O.D. I.D.
Model
Resin sleeve Brass sleeveø2.5
ø4
ø5ø6
ø6.5ø7.5ø8ø9
ø4ø5ø6
ø6.5ø7.5ø8ø9
ø4
ø6
ø8
ø10
ø12
ø6
ø8
ø10
ø12
R1/4
R3/8
R3/8
R3/8
KFE06-02KFE08U-03KFE08N-03KFE10U-03KFE10N-03KFE12U-03KFE12N-03
KFE06B-02—
KFE08B-03—
KFE10B-03—
KFE12B-03
KFF Female ConnectorUsed to pipe tube from a male thread such as pressure gauge.
KFE Bulkhead Connector Used to pipe tube to a male thread.
KFF04-02KFF06-02KFF06-03KFF08U-02KFF08N-02KFF10U-02KFF10N-02KFF12U-02KFF12N-02
Connec-tion
thread
Applicabletubing size (mm)
Connec-tion
thread
Applicabletubing size (mm)
Insert Fittings
O.D. I.D.
Model
Resin sleeve Brass sleeveR1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2
KFW04-01SKFW04-02SKFW06-01SKFW06-02SKFW06-03SKFW08U-01SKFW08U-02SKFW08U-03SKFW08N-01SKFW08N-02SKFW08N-03SKFW10U-02SKFW10U-03SKFW10U-04SKFW10N-02SKFW10N-03SKFW10N-04SKFW12U-02SKFW12U-03SKFW12U-04SKFW12N-02SKFW12N-03SKFW12N-04S
KFW04B-01SKFW04B-02SKFW06B-01SKFW06B-02SKFW06B-03S
———
KFW08B-01SKFW08B-02SKFW08B-03S
———
KFW10B-02SKFW10B-03SKFW10B-04S
———
KFW12B-02SKFW12B-03SKFW12B-04S
O.D. I.D.
ModelApplicabletubing size (mm)
Resin sleeve Brass sleeve
ø2.5
ø4
ø5
ø6
ø6.5
ø7.5
ø8
ø9
ø2.5ø4ø5ø6
ø6.5ø7.5ø8ø9
ø4
ø6
ø8
ø10
ø12
ø4ø6
ø8
ø10
ø12
KFE04-00KFE06-00KFE08U-00KFE08N-00KFE10U-00KFE10N-00KFE12U-00KFE12N-00
KFE04B-00KFE06B-00
—KFE08B-00
—KFE10B-00
—KFE12B-00
Swivel Extended ElbowUsed to pipe tube at right angles to a female thread. Can be swiveledat any direction. Solid section moves fittings up above a workpiece.
Bulkhead UnionUsed to pipe tubes through a panel.
Connec-tion
thread
Applicabletubing size (mm)
ø4ø6ø8
ø10ø12
ModelApplicabletubing size (mm)
KFP-04KFP-06KFP-08KFP-10KFP-12
PlugUsed to plug unused fittings.
Series M Miniature Fittings
Fittings & Tubing
1436
Miniature Fittings
Series M
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread : M3, M5, R1/8
Applicable tubing material
Max. operating pressure (at 20C)Connection sizeThread
Hose Nipple
Barb Fittings
Compact piping space.The hose nipple has a large holding force, allowing easy connection and removal.
A wide variety of models is available.Piping in the same direction is possible at different heights.
Hose nipple, Hose elbow.Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing.
Nylon Soft nylon
M3, M5, R1/81.0MPa
JIS B0209 Class 2 (Metric thread), JIS B0203 (Taper thread for piping)
Polyurethane
ø4/ø2.5ø6/ø4
ø3.18/ø2.18 ø4/ø2.5ø6/ø4
ø2, ø3.18/ø2ø4/ø2.5, ø6/ø4
1.5MPa 0.8MPa
Tubing
Barb fittingsThe tube allows easy tubing insertion as well as secure tubing holding.
BodyWith electroless nickel plated
BodyWith electroless nickel plated
Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing.
Cap nutSecure holding is achieved by manual tightening.Easy disconnection of tubing by loosening.Electroless nickel plated.
GasketSmall tightening torque.Secure sealing.
Barb fittingsThe tube allows easy tubing insertion as well as secure tubing holding.
GasketSmall tightening torque.Secure sealing.
Tubing
—M3
M5-R1/8
ø4/ø2.5 ø2, ø3.18/ø2, ø4/ø2.5
PAT.
Applicabletubing
ø2 Miniature FittingsSeries M
Miniature Fittings Series M
Fitti
ngs
& T
ubin
g
1437FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Miniature Fittings
Series M5
ModelDescriptionBarb fittings for nylon tubing
To pipe nylon tubing.
Application
M-5AN-4
M-5AN-6
Extension fitting For 3D piping to
prevent interference between fittings.
M-5J
Barb fittings for soft tubing
Barb elbow for nylon tubing
To pipe soft nylon tubing.
To pipepolyurethane tubing.
To pipe soft nylon tubing.
To pipepolyurethane tubing.
To pipe soft nylon, polyurethane tubing.
M-5AU-3
M-5AU-4
M-5AU-6
• To pipe nylon tubing• Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
M-5ALN-4
M-5ALN-6
Barb elbow for soft tubing
ModelDescription Application
To pipe soft nylon,polyurethane tubing.
Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
To pipe soft nylon tubing.
To pipepolyurethane tubing.
To pipe soft nylon,polyurethane tubing.
Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
Remark(s)
ø6/4 X M5
ø4/2.5 X M5ø4/2.5 X M5
ø3.18/2.18 X M5
ø3.18/2 X M5
ø3.18/2 X M5
ø4/2.5 X M5
ø6/4 X M5
ø4/2.5 X M5
ø6/4 X M5
ø3.18/2.18 X M5
ø6/4 X M5
ø4/2.5 X M5
M-5ALU-3
Barb elbow for nylon tubing (H)
Barb elbow for soft tubing (H)
• To pipe nylon tubing• Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
M-5ALHN-4
ø6/4 X M5 M-5ALHN-6
NippleTo connect fittings and equipment or to connect 2 fittings.
M-5N
Universal tee
M-5UT
Universal elbowBody rotates 360˚ around the stud axis. Position can be fixed after alignment.
Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
M-5UL
TeePerpendicular piping in both directions.M-5T
Elbow
Perpendicular piping.M-5L
Hose elbow(H)
Hose elbow• To pipe nylon, soft nylon, polyurethane tubing.• Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
Hose nipple To pipe nylon, soft nylon, polyurethane tubing.
M-5H-4
ø6/4 X M5 M-5H-6
ø4/2.5 X M5 M-5HL-4
ø6/4 X M5 M-5HL-6
ø4/2.5 X M5 M-5HLH-4
ø6/4 X M5 M-5HLH-6
M-5ALU-6
ø4/2.5 X M5 M-5ALU-4
ø3.18/2 X M5
ø3.18/2.18 X M5
ø6/4 X M5
M-5ALHU-3
ø4/2.5 X M5 M-5ALHU-4
M-5ALHU-6
Remark(s)
M5 female X M5 femaleX M5 male
M5 male X M5 female
M5 male X M5 male
Universal nippleBody rotates 360˚ around the stud axis.M-5UN
M5 male X M5 male
PAT.
Bulkhead unionPanel mount connection
M-5EM5 X M5female – female
Bulkhead Reducer Reduction from Rc1/8 to M5. Panel mounting is possible.
M-5ERRc1/8 X M5 female
M5 female X M5 female X M5 female
M5 femaleX M5 male
M5 female X M5 female
Manifold Rc1/8 can be diverted in up to nine M5 stations. Panel mounting is possible.
M-5MRc1/8
X M5 female(9 port )
Gasket (H) M-5ALm-6M-5ALHm-6M-5HL-4, 6M-5HLH-4, 6.
M-5GH
Gasket
M5 thread labelMaterial:PVC
Material:Nylon 66.GF 30%
M-5G1
Plug To plug unused M5 port.
Bushing
M-5B
M-5P
Connection from R1/8 piping to M5 fittings.
R1/8 X M5 female
M-5AU-2To pipepolyurethane tubing.ø2/1.2 X M5
To pipepolyurethane tubing.M-5ALHU-2ø2/1.2 X M5
M-3ALU-2ø2/1.2 X M3
M-5ALHU-2ø2/1.2 X M5
Series M Miniature Fittings
Fittings & Tubing
1438
Miniature Fittings
Series M3 Series R1/8
ModelDescription
Barb fittings for soft tubing
To pipe soft nylon tubing.
Application
To pipepolyurethane tubing.
To pipe soft nylon, polyurethane tubing.
M-3AU-3
M-3AU-4
Barb elbow for soft tubing
Universal elbow
To pipe soft nylon tubing.
To pipepolyurethane tubing.
To pipe soft nylon,polyurethane tubing.
M-3ALU-3
M-3ALU-4
Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
M-3UL
Universal tee
ModelDescription ApplicationRemark(s)
ø3.18/2.18X M3
ø3.18/2 X M3
ø4/2.5 X M3
ø3.18/2.18X M3
ø3.18/2 X M3
ø4/2.5 X M3
M3 femaleX M3 male
M3 maleX M3 male
M3 female X M3 femaleX M3 male
M-3UT
NippleTo connect fittings and equipment or to connect 2 fittings.
M-3N
PlugTo plug unused M3 port.M-3P
GasketSealant (Thread portion)M-3G
M-04R-2
Plug-in reducer
To pipe polyurethane tubing.
M-32R-2
M-01AU-6
Barb fittings for soft tubing
To pipe soft nylon, polyurethane tubing.
M-01AU-4
Barb fittings for nylon tubing
To pipe nylon tubing.
M-01AN-4
Remark(s)
ø4/2.5 X R1/8
M-01AN-6ø6/4 X R1/8
ø4/2.5 X R1/8
ø6/4 X R1/8
ø2/1.2 X 3.2 mm
ø2/1.2 X 4 mm
Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
M-3AU-2ø2/1.2 X M3To pipepolyurethane tubing.
M-3ALU-2ø2/1.2 X M3To pipepolyurethane tubing.
M-01H-6
Hose nipple
To pipe nylon, soft nylon, polyurethane tubing.
M-01H-4ø4/2.5 X R1/8
ø6/4 X R1/8
M-04F-2
Hose nipple
To pipe polyurethane tubing.
M-32F-2ø2/1.2
X 3.2 mmone-touch
ø2/1.2 X 4 mmone-touch
MaterialPVC
Self Align Fittings Series H, DL, L, LL
Fitti
ngs
& T
ubin
g
1439FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Self Align Fittings
Series H, DL, L, LL
Specifications
Features
Main Parts Material
Prevents tubing from deforming inwards.
Prevents tubing sliding during installation.The tubing holding mechanism gives the strong feeling when inserting the tubing and prevents the tubing from sliding when screwing in the tubing.
Flared inside diameter
Tubing holder
Large holding force by metal ferrule.Applicable to soft copper.(Not applicable to urethane tubing.)
Ferrule
Body
Union nut
Tubing
PAT.
Applicable tubing material
Applicable tubing O.D.
Max. operating pressure
Proof pressure
Fluid
Sealant (Thread portion) Note)
Nylon tubing, Soft nylon tubing, Soft copper tubing (C1220T-O)
ø4, ø6, ø8, ø10, ø12
1.0MPa
10MPa
Air
JIS B 0203 (Taper thread for piping)
JIS B 0211 Class 2 (Metric fine thread)
None or with sealant
Thread portionNut part
Body
Nut
Ferrule
C3604BD, C3771BE
C3604BD
C2700T
Thread
Ferrule with no orientation.The non-oriented construction is free from mistakes and consequent working loss or accidents when inserting the ferrule into the fitting body are reduced.
Hardened ridge ferrule.The single bite construction with a strong ridge prevents breakage of ferrule when tightening.
Small pressure loss.A large flow rate is achieved with small flow resistance due to the construction without an insert.
Wide variety of styles and sizes.10 models including swivel styles and 5 tubing O.D. provide a wide range of fittings that will fit any application.
Note) The male elbow, male branch tee and service tee union with sealant are manufactured upon receipt of order.
Applicable tubing O.D.: Metric Size Connecting thread: R, Rc
Series H, DL, L, LL Self Align Fittings
Fittings & Tubing
1440
Self Align Fittings
H Male Connector L Swivel Elbow
4
6
8
10
12
H04-01 -02H06-01 -02 -03H08-01 -02 -03H10-02 -03 -04H12-02 -03 -04
Most common style used to pipe from female thread in the same direction.
Applicable tubingmm
Connecting thread
Model
4
6
8
10
12
L04-01 -02L06-01 -02 -03L08-01 -02 -03L10-02 -03 -04L12-02 -03 -04
To pipe from the female threaded at the right angle.Swiveled at any direction.
4
6
8
10
12
DL04-01 -02DL06-01
-02 -03DL08-01
-02 -03DL10-02
-03 -04DL12-02
-03 -04
Most common style used to pipe from female thread at a right angle.
4
6
8
10
12
LL04-01 -02LL06-01
-02 -03LL08-01
-02 -03LL10-02
-03 -04LL12-02
-03 -04
To pipe from the female threaded at a right angle.Swiveled at any direction. Solid piece moves fittings up from work piece.
R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
Applicable tubingmm
Connecting thread Model
Applicable tubingmm
Connecting thread Model
Applicable tubingmm
Connecting thread Model
DL Male Elbow LL Swivel Extended Elbow
Self Align Fittings Series H, DL, L, LL
Fitti
ngs
& T
ubin
g
1441FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Self Align Fittings
DT Male Branch Tee DT Union Tee
4
6
8
10
12
DT04-01 -02DT06-01
-02 -03DT08-01
-02 -03DT10-02
-03 -04DT12-02
-03 -04
To branch the line from the female thread at 90˚ in each direction.
4
6
8
10
12
DY04-01 -02DY06-01 -02 -03DY08-01 -02 -03DY10-02 -03 -04DY12-02 -03 -04
To branch the line from the female thread in the same direction and at 90˚.
468
1012
DE04-00DE06-00DE08-00DE10-00DE12-00
To connect tubing through a panel.
4681012
DT04-00DT06-00DT08-00DT10-00DT12-00
To branch tubing into 2 directions each at 90˚ to the original one.
4
6
81012
DHF04-02DHF06-02
-03DHF08-02DHF10-02DHF12-02
To pipe from the male threaded portion of a pressure gauge, etc.
681012
DEF06-02DEF08-03DEF10-03DEF12-03
Used for trunk connection between tubing and a male thread installed through a panel.
ø4ø6ø8ø10ø12
DP-04DP-06DP-08DP-10DP-12
To plug unused self-align fittings.
Applicable fitting size
Model
R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
Rc1/4Rc3/8Rc3/8Rc3/8
Rc1/4Rc1/4Rc3/8Rc1/4Rc1/4Rc1/4
Applicable tubing
mm
Connecting thread Model
Applicable tubing
mm
Connecting thread Model
Applicable tubing mm
Model
Applicable tubing
mm
Connecting thread Model
Applicable tubing
mm
Connecting thread Model
Applicable tubing mm Model
DHF Female Connector
DEF Bulkhead Female Connector
DP Plug
DY Male Run Tee
DE Bulkhead Union
Series KC Self - sealing fittings
Fittings & Tubing
1442
Self - sealing fittings
Applicable Tubing
Series KC
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread: M, R, Rc
Fluid
Max. operating pressure
Proof pressure
Ambient and fluid temperature
Thread label (Standard)
Copper-free specifications (Standard)
Air
1.0MPa
3.0MPa
–5 to 60˚C (With no condensation)
JIS B0203 (Taper thread for piping)
JIS B0211, Class 2 (Metric fine thread)
With sealant
All brass parts with electroless nickel plated.
MountingNut
Tubing material
Tubing O.D.
Nylon, Soft Nylon, Polyurethane
ø4, ø6, ø8, ø10, ø12
Thread
Built-in self seal mechanism.No air leakage even when the tubing is removed.
Effective for piping in confined space.The body and thread portion rotate separately.
No need of a sealant tape.Stud
Body
Guide
CushionStopper
O-ringRetainer
Spring
Valve
Release button
ColletChuck
With sealant
O-ring
Tubing
One-touch fitting with built-in self seal mechanism to prevent air exhaust when removing the tubing.
Electroless nickel plated for copper-free applications.
Without tubing With tubing
PAT.
Self - sealing fittings Series KC
Fitti
ngs
& T
ubin
g
1443
FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
KCH Male Connector
Tube Coupler
KCE Bulkhead Union
4
6
8
10
12
M5
M5
KCH04-M5 -01S
KCH06-M5 -01S -02SKCH08-01S
-02S -03SKCH10-02S
-03SKCH12-03S
-04S
For piping in the same direction from the female thread.
To pipe from the female thread at the right angle.
Applicabletubing O.D.
mm
4
6
8
10
12
Connecting thread
M5
M5
Applicabletubing O.D.
mm
Connecting thread Model
KCL04-M5 -01S
KCL06-M5 -01S -02S
KCL08-01S -02S -03S
KCL10-02S -03S
KCL12-03S -04S
To connect tubing through a panel.One of 2 ports has a check valve.
Applicable tubing O.D.mm
4681012
KCE04-00KCE06-00KCE08-00KCE10-00KCE12-00
Model
Model
To branch tubing into 2 directions each at 90˚ to the original one.
Applicable tubing O.D.mm
4681012
KCT04-00KCT06-00KCT08-00KCT10-00KCT12-00
Model
To branch tubing in the same direction. Only branches have integral check valves.
Applicable tubing O.D.mm
468
1012
KCU04-00KCU06-00KCU08-00KCU10-00KCU12-00
Model
To connect tubing in the same direction. One of 2 ports has a check valve.
Applicable tubing O.D.mm
468
1012
KCH04-00KCH06-00KCH08-00KCH10-00KCH12-00
Model
To be connected to a series KQ one-touch fitting to provide tube coupler function.
Applicable tubing O.D.mm
4681012
KCJ04-99KCJ06-99KCJ08-99KCJ10-99KCJ12-99
Model
R1/8
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2
R1/8
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2
KCT Union Tee
KCL Male Elbow
KCH Straight Union
KCU Union “Y”
KCJ Check Adaptor
Series KC Self - sealing fittings
Fittings & Tubing
1444
Tube Coupler
468
1012
KCH04-99KCH06-99KCH08-99KCH10-99KCH12-99
To save tube cutting labor in cases where tubing is frequently connected and removed.To connect tubing in the same direction as the tube coupler.
Applicable tubing O.D.mm
Model
4681012
KCL04-99KCL06-99KCL08-99KCL10-99KCL12-99
To save tube cutting labor in cases where tubing is frequently connected and removed.To connect a tubing at a right angle to the tube coupler.
Applicable tubing O.D.mm
Model
468
1012
KCE04-02KCE06-02KCE08-03KCE10-03KCE12-03
Used for trunk connection between tubing and a male thread installed through a panel.
Applicabletubing O.D.
mmModelConnecting
thread
1/41/43/83/83/8
KCH Straight Plug for Frequent Use KCE Bulkhead Female Union
KCL Elbow Plug for Frequent Use
Multi-Connector with One-Touch Fittings Series DMK
Fitti
ngs
& T
ubin
g
1445
FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
With cover
Multi-Connector with One-Touch Fittings
Series DMK
Specifications
Features
Applicable tubing O.D.: Metric Size No. of connecting tubing: 6 or12
Applicable tubing material
Applicable tubing O.D.
Fluid
Max. operating pressure
Ambient and fluid temperature
Nylon, Soft Nylon, Polyurethane
ø3.2, 4
Air
1.0MPa
–5 to 60˚C (With no condensation)
With one-touch fitting.Applicable to nylon, soft nylon and polyurethane tubing.
Installation processes are considerably reduced.Simpler installation and less labour compared with use of numerous bulkhead unions for panel mounting.
Secure tubing retention.Tubing can be firmly connected to the multiconnector in one-step operation (with one-touch fitting).
No. of connecting tubesTwo types, with 6 and 12 connecting tubing, are available.
6
ModelApplicable
tubingO.D. mm
No. ofconnecting
tubingMulti-
connector Plug side Socketside
12
DMK6
DMK12
ModelApplicable
tubingO.D. mm
No. ofconnecting
tubingMulti-
connector Plug side Socketside
046
3.2mm4mm
2304
Tubing O.D.
612
612
No. of connecting tubing
Multi connectorPlug side
Socket side
—PS
Configuration
Accessories (Optional)Nil
Single side cover (1 pc.)Both sides cover (2 pcs.)
-C1C2
DMKHow to Order
SocketSocket case
U-ringSecure sealing.
Plug casePlug
The protrusion and recession on both surfaces can be fit for engagement at the prescribed position.
Clamp ringConnects the socket and plug.
PlateSpacer
Cover
Holder
PAT.
3.2
4
DMK6-23
DMK6-04
DMK6P-23
DMK6P-04
DMK6S-23
DMK6S-04
DMK12-23
DMK12-04
DMK12P-23
DMK12P-04
DMK12S-23
DMK12S-04
3.2
4
Series KDM Rectangular Multi-Connector
Fittings & Tubing
1446
Rectangular Multi-Connector
Applicable Tubing
Series KDM
Specifications
Features
Applicable tubing O.D.: Metric Size No. of connecting tubing: 10 or 20
Fluid
Max. operating pressure
Operating vacuum pressure
Proof pressure
Ambient and fluid temperature
Air
1.0MPa
–100kPa
1.5MPa
–5 to 60˚C (With no condensation)
Tubing material
Tubing O.D.
Nylon, Soft nylon, Polyurethane
ø3.2, ø4, ø6, ø8
Substantial reduction of mounting space.Requires less installation space compared with use of numerous bulkhead unions for panel mounting.
One-touch installation and removal of connector.Numbers of pipes can be connected and disconnected instantly without connection errors, saving substantial labour in installation.
One-touch tubing connection.One-touch fittings substantially cut down man hours for piping.
Plug caseEngagement in the prescribed position can be achieved by fitting both surfaces.
With one-touch fittingTubing of different diameters can be used together.Metric size ø3.2, ø4, ø6, ø8For application requiring copper-free material (Electroless nickel plated)Two types, with 10 and 20 connecting tubing are available.
PackingCompatible with vacuum of -100kPa to 1 MPa
Clamp bolt
Panel mounting bracket (Standardized)Mounting only requires operation on the panel front. No need to make mounting screw holes. (Allows up to 5 mm of panel thickness) Plug connector
Socket connector
Plate
Screw for bracketE type snap ring
Socket casePAT.PEND
3.2468
KDM10-23 -04 -06 -08
No. of connecting
tubing
10
Applicabletubing O.D.
mmModel
3.2468
KDM20-23 -04 -06 -08
No. of connecting
tubing
20
Applicabletubing O.D.
mmModel
KDM10
KDM20
Flame Resistant One-Touch Fittings Series KR
Fitti
ngs
& T
ubin
g
1447FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Flame Resistant One-Touch Fittings
Applicable Tubing
Series KR
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread: R, Rc
Push-in collet type
For flame resistant soft nylon tube
ø6, ø8, ø10, ø12mm tube
Sealant on threaded portion
For air and water, vacuum or pressure applications
Low disconnecting force (prevents biting)
Flame resistance equivalent to UL-94 standard V-0
ChuckApplicable to soft nylon.Large retaining force.Secure engagement with chuck and large retaining force with collet.
Compatible with a wide range of pressure, from low vacuum to 1.0 MPa.The special shape ensures sealing and reduces resistance of tubing insertion.
Series KR: Black body.Requires little force for removal.Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing.
Effective for piping in confined space.The body and thread portion can be rotated. (For positioning)
Packing
Stud
Release button
O-ringBody
Tubing
Prevents releasing of the tubing due to spatter invasion or adhesion.
Cover (Option)
No need of a sealant tape.
With sealant
ColletGuide
PAT.
Series KR: Black body.Series KR-W2: White Body - See Best Pneumatics
Fluid
Max. operating pressure
Proof pressure
Ambient and fluid temperature
Thread
Sealant (Thread portion)
Air, Water Note1)
1.0MPa
3.0MPa
–5 to 60˚C, In case of water: 0 to 60˚C (With no condensation)
JIS B0203 (Taper thread for piping)
JIS B0211, Class 2 (Metric fine thread)
With sealant (Standard)
MountingNut
Note1) Applicable to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure.
Tubing material
Tubing O.D.
Flame resistant double layer, flame resistant soft nylon
ø6, ø8, ø10, ø12
Series KR Flame Resistant One-Touch Fittings
Fittings & Tubing
1448
Flame Resistant One-Touch Fittings
KRH Male Connector KRK 45˚ Male Elbow
6
8
10
12
KRH06-01S -02S -03SKRH08-01S
-02S -03SKRH10-01S
-02S -03S -04SKRH12-02S
-03S -04S
Most common style used to pipe from female thread in the same direction.
Most common style used to pipe from female thread at a right angle.
Applicabletubing O.D.
mm
6
8
10
12
Connecting thread
Applicabletubing O.D.
mmConnecting
thread
Model
KRL06-01S -02S -03S
KRL08-01S -02S -03S
KRL10-01S -02S -03S -04S
KRL12-02S -03S -04S
KRH( )
For piping at 45˚ from female thread.Intermediate model between male connector and male elbow.
Applicabletubing O.D.
mm
6
8
10
12
Connecting thread
KRK06-01S -02S -03S
KRK08-01S -02S -03S
KRK10-01S -02S -03S -04S
KRK12-02S -03S -04S
Model
KRL(Black)
Model
KRK (Black)
Basically used in the same way as a male elbow.But also used in 3 dimensional piping to prevent interference of fittings.
Applicabletubing O.D.
mm
6
8
10
12
Connecting thread
KRW06-01S -02S -03SKRW08-01S
-02S -03SKRW10-02S
-03S -04SKRW12-02S
-03S -04S
Model
KRW(Black)
The hexagon head of the body is used to tighten the body with a box wrench in a confined space.
Applicabletubing O.D.
mm
6
8
10
12
Connecting thread
KRV06-01S -02SKRV08-01S
-02S -03SKRV10-02S
-03SKRV12-03S
-04S
Model
KRV(Black)
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2
Release button,Green
KRL Male Elbow KRW Extended Male Elbow
KRV Universal Male Elbow
6
8
10
12
Used for trunk connection between tubing and a male thread installed through a panel.
Applicabletubing O.D.
mm
Model
KRE-W2 (White)
KRE06-01W2 -02W2 -03W2
KRE08-01W2 -02W2 -03W2
KRE10-02W2 -03W2
KRE12-02W2 -03W2 -04W2
Connecting thread
Rc1/8Rc1/4Rc3/8Rc1/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/2
This model is not available with black body specifications.
KRE-W2 Bulkhead Female Union
Flame Resistant One-Touch Fittings Series KR
Fitti
ngs
& T
ubin
g
1449FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Flame Resistant One-Touch Fittings
KRT Branch Tee KRU Union “Y”
6
8
10
12
KRT06-01S -02S -03S
KRT08-01S -02S -03S
KRT10-01S -02S -03S -04S
KRT12-02S -03S -04S
To branch the line from the female thread at 90˚ in each direction.
To branch the line from the female thread in the same direction and at 90˚.
Applicabletubing O.D.
mm
6
8
10
12
Connecting thread
Applicabletubing O.D.
mm
Connecting thread
Model
KRY06-01S -02S -03S
KRY08-01S -02S -03S
KRY10-01S -02S -03S -04S
KRY12-02S -03S -04S
KRT (Black)
To branch tubing in the same direction.
Applicabletubing O.D.
mm
6
8
10
12
Connecting thread
KRU06-01S -02S -03S
KRU08-01S -02S -03S
KRU10-02S -03S -04S
KRU12-02S -03S -04S
Model
KRY (Black)
Model
KRU(Black)
To connect tubing in the same direction.
Applicable tubing O.D.mm
68
1012
KRH06-00KRH08-00KRH10-00KRH12-00
Model
KRH (Black)
To connect tubing through a panel.
Applicable tubing O.D.mm
681012
KRE06-00KRE08-00KRE10-00KRE12-00
Model
KRE( )
To connect tubing at right angles to each other.
Applicable tubing O.D.mm
681012
KRL06-00KRL08-00KRL10-00KRL12-00
Model
KRL (Black)
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2
Release button,Green
KRY Male Run Tee KRH Straight Union
KRE Bulkhead Union
KRL Union Elbow
Series KR Flame Resistant One-Touch Fittings
Fittings & Tubing
1450
Flame Resistant One-Touch Fittings
KRT Union Tee KRP Plug
68
1012
KRT06-00KRT08-00KRT10-00KRT12-00
To branch tubing into 2 directions each at 90˚ to the original one.
To branch tubing in the same direction.
Applicable tubing O.D.mm
681012
Applicable tubing O.D.mm
Model
KRU06-00KRU08-00KRU10-00KRU12-00
KRT (Black)
To plug unused one-touch fittings.
68
1012
KRP-06KRP-08KRP-10KRP-12
Model
KRU (Black)
Model
To connect to a smaller one-touch fitting.
Applicabletubing O.D.
mm
Fitting size
Fitting size
6
8
10
810101212
KRR06-08 -10
KRR08-10 -12
KRR10-12
Model
KRR (Black)
To branch the line from a one-touch fitting into tubing in the same direction.
Applicabletubing O.D.
mm
Fitting size
68
1012
681012
KRU06-99KRU08-99KRU10-99KRU12-99
Model
KRU (Black)
Prevents releasing of the tubing due to spatter invasion or adhesion.KR (Applicable tubing: FR soft nylon)
681012
KR-06CKR-08CKR-10CKR-12C
ModelFitting size
Prevents releasing of the tubing due to spatter invasion or adhesion.KR (Applicable tubing: FR soft nylon, FR2 layer)
681012
KR-06C1KR-08C1KR-10C1KR-12C1
ModelFitting size
KRU Union “Y” KR Spatter Cover 1
KRR Plug-In Reducer
KRU Plug-In “Y”
KR Spatter Cover 2
Flame Resistant One-Touch Fitting Manifold Series KRM
Fitti
ngs
& T
ubin
g
1451FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Flame Resistant One-Touch Fitting Manifold
Applicable Tubing
Series KRM
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread: Rc
Tubing material
Tubing O.D.
FR double layer, FR soft nylon
ø6, ø8, ø10, ø12
One-touch tubing manifold.
Flame resistance equivalent to UL-94 standard V-0.
6-10 outlets.
For air and water.
For vacuum or pressure applications.
Model
Fluid
Max. operating pressure
Proof pressure
Ambient and fluid temperature
ThreadAccessory
Air, Water Note 1)
1.0MPa
3.0MPa
–5 to 60˚C,In case of water: 0 to 60˚C (With no condensation)
Note 1) Applicable to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure.
Port AConnection size
Number of port A
PortingPort A Port B
Model
KRM11
KRM12
One-touch fitting
One-touch fitting
One-touch fitting
Rc female thread
6, 10
6, 10
ø6 tubing
ø8 tubing
ø6 tubing
ø8 tubing
Port BConnection size
ø10 tubing
ø12 tubing
Rc1/4
Rc3/8
JIS B0203 (Taper thread for piping)
Hexagon socket head plug: 1 pc
—
None
KRM12KRM11
Model
KRM11 KRM12
Construction
Series KRM Flame Resistant One-Touch Fitting Manifold
Fittings & Tubing
1452
Flame Resistant One-Touch Fittings Manifold
KRM11
KRM12
6
A
8
10
B
12
6106
10
KRM11-06-10-6 -10
KRM11-08-12-6 -10
Connectionthread
Applicable tubing O.D. mm Numberof port A
ModelA
B
6
8
610610
KRMC-06-6 -10
KRMC-08-6 -10
Applicable tubing O.D.
mmN Model
6
8
6106
10
KRM12-06-02-6 -10
KRM12-08-03-6 -10
Applicable tubing O.D.
mm
Numberof port A
ModelAA
Rc1/4
Rc3/8
KRMC (Applicable tubing: FR soft nylon)
KRMC Spatter Cover 3
Stainless Steel One-Touch Fittings Series KG
Fitti
ngs
& T
ubin
g
1453
FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Stainless Steel One-Touch Fittings
Applicable Tubing
Series KG
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread: M5, R, Rc
Tubing material
Tubing O.D.
Nylon, Soft nylon, Polyurethane
ø4, ø6, ø8, ø10, ø12, ø16
Stainless steel specification compatible with corrosive environment.
303 stainless steel used for metal parts.
Suitable for use in CRT production lines for copper free environment,for food processing machine washing to endure water or salt splashes and for use in clean rooms to prevent particle generation resulting from corrosion.
Tube sizes Ø4 - 16mm
Fluid
Max. operating pressure
Operating vacuum pressure
Proof pressure
Ambient and fluid temperature
Thread
Sealant (Thread portion)
Air, Water Note1)
1.0MPa
–100kPa
3.0MPa
–5 to 60˚C, In case of water: 0 to 40˚C (With no condensation)
JIS B0203 (Taper thread for piping)
JIS B0211, Class 2 (Metric fine thread)
With / Without sealant Note2)
MountingNut
Note1) Applicable to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure.Note2) Suffix "S" to part number if sealant is desired.
PAT.
ChuckApplicable to nylon and polyurethane.Large retaining force.Secure engagement with chuck and large retaining force with collet.
Compatible with a wide rangeof pressure, from low vacuum to 1.0MPa.The special shape ensures sealing and reduces resistance in tubing insertion.
Requires little force for removal.Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing.
Effective for piping in confined space.The body and thread portion can be rotated.
Packing
Stud
Release button (White)
O-ringBody (White)Tubing
ColletGuide
Series KG Stainless Steel One-Touch Fittings
Fittings & Tubing
1454
KGH Male Connector
Stainless Steel One-Touch Fittings
KGL Male Elbow
4
6
8
10
12
16
M5
M5
KGH04-M5 -01 -02KGH06-M5 -01 -02 -03KGH08-01 -02 -03KGH10-01 -02 -03 -04KGH12-02 -03 -04KGH16-03 -04
Most common style used to pipe from female thread in the same direction.
<M5>
<R>
The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space.
<M5>
<R>
Applicabletubing O.D.
mm
4
6
8
10
12
Connecting thread
M5
M5
Applicable tubing O.D.
mm
Connecting thread Model
KGS04-M5 -01KGS06-M5 -01 -02KGS08-01 -02 -03KGS10-01 -02 -03 -04KGS12-02 -03 -04
Basically used in the same way as a male elbow.But also used in 3 dimensional piping to prevent interference of fittings.
<M5>
<R>
Most common style used to pipe from female thread at a right angle.
<M5>
<R>
Applicabletubing O.D.
mmM5
M5
4
6
8
10
12
16
Connecting thread
KGL04-M5 -01 -02KGL06-M5 -01 -02 -03KGL08-01 -02 -03KGL10-01 -02 -03 -04KGL12-02 -03 -04KGL16-03 -04
Applicable tubing O.D.
mm
Connecting thread
4M5
M5
6
8
10
12
KGW04-M5 -01 -02KGW06-M5 -01 -02 -03KGW08-01 -02 -03KGW10-02 -03 -04KGW12-02 -03 -04
Model
Model
Model
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8
R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2
KGS Hex. Socket Head Male Connector KGW Extended Male Elbow
To plug unused tubing.
Applicable tubing O.D.mm
468
101216
KGC04-00KGC06-00KGC08-00KGC10-00KGC12-00KGC16-00
Model
KGC Tubing CapTo change the tubing direction from a one-touch fitting by 90.
Applicabletubing O.D.
mm4681012
Fitting size
468
1012
KGL04-99KGL06-99KGL08-99KGL10-99KGL12-99
Model
KGL Plugin Elbow
Stainless Steel One-Touch Fittings Series KG
Fitti
ngs
& T
ubin
g
1455
FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
KGV Universal Male Elbow
Stainless Steel One-Touch Fittings
KGY Male Run Tee
KGT Male Branch Tee
KGU Union “Y”
4
6
8
10
12
M5
M5
KGV04-M5 -01KGV06-M5 -01 -02KGV08-01
-02 -03KGV10-02
-03KGV12-03
-04
The hexagon head of the body is used to tighten the body with a box wrench in a confined space.
<M5>
<R>
To branch the line from the female thread at 90˚ in each direction.
<M5>
<R>
Applicabletubing O.D.
mm
4
6
8
10
12
16
Connecting thread
M5
M5
Applicabletubing O.D.
mmConnecting
threadModel
KGT04-M5 -01 -02KGT06-M5 -01 -02 -03KGT08-01
-02 -03KGT10-01
-02 -03 -04KGT12-02
-03 -04KGT16-03
-04
To branch tubing in the same direction.
<M5>
<R>
To branch the line from the female thread in the same direction and at 90˚.
<M5>
<R>
Applicabletubing O.D.
mmM5
M5
4
6
8
10
12
16
Connecting thread
KGY04-M5 -01 -02KGY06-M5 -01 -02 -03KGY08-01
-02 -03KGY10-01
-02 -03 -04KGY12-02
-03 -04KGY16-03
-04
Applicabletubing O.D.
mm
Connecting thread
4M5
M5
6
8
10
12
KGU04-M5 -01 -02KGU06-M5 -01 -02 -03KGU08-01
-02 -03KGU10-02
-03 -04KGU12-02
-03 -04
Model
Model
Model
R1/8
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2
To connect to a smaller one-touch fitting.
Applicabletubing O.D.
mm
4
6
8
10
12
Fitting size
68
1048
10121012121616
KGR04-06 -08 -10KGR06-04 -08 -10 -12KGR08-10 -12KGR10-12 -16KGR12-16
Model
KGR Plug-In Reducer
Series KG Stainless Steel One-Touch Fittings
Fittings & Tubing
1456
KGLU Male Branch Connector
Stainless Steel One-Touch Fittings
KGUD Double Branch
KGD Delta Union
KGH Straight Union
4
6
8
10
12
M5
M5
KGLU04-M5 -01 -02KGLU06-M5 -01 -02 -03KGLU08-01 -02 -03KGLU10-02 -03 -04KGLU12-02 -03 -04
To branch the line from the female thread at a right angle.
<M5>
<R>
To branch the line from the female thread into 4 tubes in the same direction.
Applicabletubing O.D.
mm
4
6
Connecting thread
Applicabletubing O.D.
mmConnecting
threadModel
KGUD04-01 -02KGUD06-01 -02
To connect tubing in the same direction.
To branch the line from the female thread into 2 directions at right angles.
<M5>
<R>
Applicabletubing O.D.
mmM5
M5
4
6
8
10
12
Connecting thread
KGD04-M5 -01 -02KGD06-M5 -01 -02 -03KGD08-01 -02 -03KGD10-02 -03 -04KGD12-02 -03 -04
Applicable tubingO.D. mm
4681012
KGH04-00KGH06-00KGH08-00KGH10-00KGH12-00
Model
Model
Model
To connect tubing through a panel.
Applicable tubingO.D.mm
468
101216
KGE04-00KGE06-00KGE08-00KGE10-00KGE12-00KGE16-00
Model
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
R1/8R1/4R1/8R1/4
R1/8R1/4
R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
KGE Bulkhead UnionKGL Union Elbow
To connect tubing at right angles to each other.
Applicable tubing O.D.mm
468
101216
KGL04-00KGL06-00KGL08-00KGL10-00KGL12-00KGL16-00
Model
To branch tubing into 2 directions each at 90˚ to the original one.
Applicable tubing O.D.mm
468101216
KGT04-00KGT06-00KGT08-00KGT10-00KGT12-00KGT16-00
ModelTo branch tubing in the same direction.
Applicable tubing O.D.mm
468
1012
KGU04-00KGU06-00KGU08-00KGU10-00KGU12-00
Model
KGT Union TeeKGU Union “Y”
Stainless Steel One-Touch Fittings Series KG
Fitti
ngs
& T
ubin
g
1457
FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
KGH Different Dia. Straight
Stainless Steel One-Touch Fittings
KGLU Branch Union Elbow
KGT Different Dia. Tee
KGU Different Dia. Union “Y”To branch a tube at a right angle into two tubes.
Applicable tubing O.D.mm
468
1012
KGLU04-00KGLU06-00KGLU08-00KGLU10-00KGLU12-00
Model
To connect tubing of different diameters.
Applicable tubing O.D.mm
KGH04-06KGH06-08KGH08-10KGH10-12
Modela468
10
b68
1012
To branch the tubing into two at a right angle and reduce the resulting branches in size.
Applicable tubing O.D.mm
KGT04-06KGT06-08KGT08-10KGT10-12
Modela468
10
b68
1012
To branch tubing into 2 smaller tubes in the same direction as the original one.
Applicable tubing O.D.mm
KGU04-06KGU06-08KGU08-10KGU10-12
Modela46810
b68
1012
To branch tubing into 4 smaller tubes in the same direction as the original one.
Applicable tubing O.D.mm
KGUD04-06KGUD06-08
Modela46
b68
a b
4- a
b
2- a b
2- a
b
KGUD Different Dia. Double Union “Y”
To pipe from the male threaded portion of a pressure gauge, etc.
Applicabletubing O.D.
mm
4
6
8
10
12
Connecting thread
KGF04-01 -02KGF06-01 -02 -03KGF08-01 -02 -03KGF10-02 -03KGF12-02 -03 -04
Model
Rc1/8Rc1/4Rc1/8Rc1/4Rc3/8Rc1/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/2
KGF Female Connector
Used for trunk connection between tubing and a male thread installed through a panel.
Applicabletubing O.D.
mm
4
6
8
10
12
16
Connecting thread
KGE04-01 -02KGE06-01 -02 -03KGE08-01 -02 -03KGE10-02 -03KGE12-03 -04KGE16-03 -04
Model
Rc1/8Rc1/4Rc1/8Rc1/4Rc3/8Rc1/8Rc1/4Rc3/8Rc1/4Rc3/8Rc3/8Rc1/2Rc3/8Rc1/2
KGE Bulkhead Female Connector
To connect 3 tubes at right angles with each other.
Applicable tubing O.D.mm
468
1012
KGD04-00KGD06-00KGD08-00KGD10-00KGD12-00
Model
KGD Delta Union
Series KQG Stainless Steel 316 One-Touch Fittings
Fittings & Tubing
1458
Stainless Steel 316 One-Touch Fittings
Series KQG316 Stainless Steel one-touch fittings.
Grease free with FKM seals.
Suitable for air, water or steam up to 150˚C.
Wide variety of tubing can be used.
Optional inner sleeve for softer tubing.
Features
Tubingmaterial
Tubing O.D.
FEP, PFA, Nylon, Soft nylon, Polyurethane, Polyolefin
ø4, ø6, ø8, ø10, ø12
Applicable Tubing
Optional Inner Sleeves
Construction
How to OrderSee part number listing on next page.
No.123456789
DescriptionRelease bushingGuideChuckSealMale connector bodyMale elbow bodyO-ringStopper ringStud
Stainless steel 316Stainless steel 316Stainless steel 316
Special FKMStainless steel 316Stainless steel 316
Special FKMStainless steel 316Stainless steel 316
Material
Tube size
040204250403060408050806106510751008120812091210
TJ-0402TJ-0425TJ-0403TJ-0604TJ-0805TJ-0806TJ-1065TJ-1075
TJ-1208
TJ-1209TJ-1210
Tubing model (Material)
TU(Polyurethane)
TUS(Soft polyurethane)
TH(FEP)
TL(PFA)
Applicable inner sleeve
Model
1818181920.520.52323
24
2424
Length
Operating fluid
Operating pressure range Note 1)
Proof pressure
Ambient and Operating fluid temperature Note 2)
Lubricant
Seal on the threads
Air, Water, Steam Note 4)
–100 kPa to 1MPa
3.0 MPa
–5 to 150°C (No freezing)
Grease-free specification
With sealantNote 1) Please avoid using in a vacuum holding application such as a leak tester, since there is leakage. Note 2) When using at 120°C or higher, for an extended period of time, we recommend that an inner sleeve be
used. Note 3) In the event of using polyurethane tubing, we recommend the use of an inner sleeve in cases where the
tubing is strained.Note 4) Special FKM that is resistant even when steam is used.
Specifications
Stainless Steel 316 One-Touch Fittings Series KQG
Fitti
ngs
& T
ubin
g
1459FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Applicable tubingO.D. (mm)
Connectionthread Model
M5R1/8M5
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2
KQGH04-M5KQGH04-01SKQGH06-M5KQGH06-01SKQGH06-02SKQGH08-01SKQGH08-02SKQGH08-03SKQGH10-02SKQGH10-03SKQGH12-03SKQGH12-04S
ø4
ø6
ø8
ø10
ø12
Applicable tubingO.D. (mm)
Connectionthread Model
M5R1/8M5
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2
KQGT04-M5KQGT04-01SKQGT06-M5KQGT06-01SKQGT06-02SKQGT08-01SKQGT08-02SKQGT08-03SKQGT10-02SKQGT10-03SKQGT12-03SKQGT12-04S
ø4
ø6
ø8
ø10
ø12
Applicable tubing O.D. (mm) ModelKQGH04-00KQGH06-00KQGH08-00KQGH10-00KQGH12-00
ø4ø6ø8ø10ø12
Applicable tubing O.D. (mm) ModelKQGT04-00KQGT06-00KQGT08-00KQGT10-00KQGT12-00
ø4ø6ø8
ø10ø12
Applicable tubing O.D. (mm) ModelKQGU04-00KQGU06-00KQGU08-00KQGU10-00KQGU12-00
ø4ø6ø8ø10ø12
Applicable tubingO.D. (mm)
Connectionthread Model
M5R1/8M5
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2
KQGL04-M5KQGL04-01SKQGL06-M5KQGL06-01SKQGL06-02SKQGL08-01SKQGL08-02SKQGL08-03SKQGL10-02SKQGL10-03SKQGL12-03SKQGL12-04S
ø4
ø6
ø8
ø10
ø12
Applicable tubingO.D. (mm)
Connectionthread Model
M5R1/8M5
R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2
KQGS04-M5KQGS04-01SKQGS06-M5KQGS06-01SKQGS06-02SKQGS08-01SKQGS08-02SKQGS08-03SKQGS10-02SKQGS10-03SKQGS12-03SKQGS12-04S
ø4
ø6
ø8
ø10
ø12
Applicable tubing O.D. (mm) ModelKQGL04-00KQGL06-00KQGL08-00KQGL10-00KQGL12-00
ø4ø6ø8ø10ø12
Applicable tubing O.D. (mm) ModelKQGE04-00KQGE06-00KQGE08-00KQGE10-00KQGE12-00
ø4ø6ø8ø10ø12
KQGT Male Branch Tee
KQGH Straight Union
KQGT Union Tee
KQGU Union “Y”
KQGL Male Elbow
KQGS Hexagon Socket Head Male Connector
KQGL Union Elbow
KQGE Bulkhead Union
KQGH Male Connector
Series KFG Stainless Steel 316 Insert Fittings
Fittings & Tubing
1460
Specifications
Stainless Steel 316 Insert Fittings
Series KFGFeatures
Operating fluid
Operating pressure range Note 1)
Proof pressure
Ambient and Operating fluid temperature Note 2)
Lubricant
Seal on the threads
Air, Water, Steam
–100 kPa to 1MPa
3.0 MPa
–5 to 150°C (No freezing)
Grease-free specification
With sealant
Material: Stainless Steel 316.
Operating fluid temperature –5 to 150°C.
Applicable tubing material: FEP, PFA, Nylon,
Soft nylon, Polyurethane, Polyolefin
Can be used with steam.
Grease-free.
Applicable tubing
Series Tubing O.D.
THTLTTSTUTPHTPS
Tubing O.D. x I.D.
ø4 x ø2,5 ø6 x ø4 ø8 x ø6 ø10 x ø7,5 ø12 x ø9FEPPFA
NylonSoft nylon
PolyurethanePolyolefin
Soft polyolefin
The insert mechanismprovides a reliable retaining force on the tube.
Fastens lightly.Adhesion or bindingalso prevented.
Sleeve
Union nut
Guide
Body
Prevents the tube from disconnecting during piping.
Tube can be connected without fully removing the nut.
Stainless Steel 316 Insert Fittings Series KFG
Fitti
ngs
& T
ubin
g
1461FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Male Connector: KFGH Male Branch Tee: KFGT
Male Elbow: KFGL
O.D. I.D.
Connectionthread
R1/8R1/4R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
KFGH0425-01SKFGH0425-02SKFGH0604-01SKFGH0604-02SKFGH0806-01SKFGH0806-02SKFGH0806-03SKFGH1075-02SKFGH1075-03SKFGH1075-04SKFGH1209-02SKFGH1209-03SKFGH1209-04S
ø2.5
ø4
ø6
ø7.5
ø9
ø4
ø6
ø8
ø10
ø12
Applicabletubing size Model
Applicabletubing size
O.D. I.D.
Connectionthread
R1/8R1/4R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
KFGT0425-01SKFGT0425-02SKFGT0604-01SKFGT0604-02SKFGT0806-01SKFGT0806-02SKFGT0806-03SKFGT1075-02SKFGT1075-03SKFGT1075-04SKFGT1209-02SKFGT1209-03SKFGT1209-04S
ø2.5
ø4
ø6
ø7.5
ø9
ø4
ø6
ø8
ø10
ø12
Model
O.D. I.D.
Connectionthread Model
R1/8R1/4R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2
KFGL0425-01SKFGL0425-02SKFGL0604-01SKFGL0604-02SKFGL0806-01SKFGL0806-02SKFGL0806-03SKFGL1075-02SKFGL1075-03SKFGL1075-04SKFGL1209-02SKFGL1209-03SKFGL1209-04S
ø2.5
ø4
ø6
ø7.5
ø9
ø4
ø6
ø8
ø10
ø12
Applicabletubing size
Straight Union: KFGH
Applicable tubing sizeO.D. I.D.
ø2.5ø4ø6
ø7.5ø9
KFGH0425-00KFGH0604-00KFGH0806-00KFGH1075-00KFGH1209-00
ø4ø6ø8
ø10ø12
Applicable tubing sizeO.D. I.D.
ø2.5ø4ø6
ø7.5ø9
KFGT0425-00KFGT0604-00KFGT0806-00KFGT1075-00KFGT1209-00
ø4ø6ø8
ø10ø12
Model
Model
Union Tee: KFGT
Most common style used to pipe from female thread in the same direction.
Most common style used to pipe from female thread at a right angle.
To branch the line from the female thread at 90° in each direction.
To connect tubing in the same direction.
To branch tubing into 2 directions each at 90° to the original one.
Series MS Stainless Steel Miniature Fittings
Fittings & Tubing
1462
Stainless Steel Miniature Fittings
Series MS
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread : M5
Applicable tubing material
Applicable tubing diameter
Max. operating pressure (At 20˚C)
Connection size
Material
Hose Nipple
Barb Fittings
Can be used in corrosive applications.
Stainless steel material (SUS316).
Compact piping space.The hose nipple has a large holding force, allowing easy connection and removal.
A wide variety of models is available.Piping in the same direction is possible at different heights.
Hose Nipple, Hose elbow.Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing.
Nylon Soft nylon
M5(JIS B0209, Class 2: Metric coarse thread)
1.0MPa
SUS316SUS 304, Aluminium
Polyurethane
ø4/ø2.5ø6/ø4
ø3.18/ø2.18 ø4/ø2.5ø6/ø4
ø3.18/ø2ø4/ø2.5, ø6/ø4
1.5MPa 0.8MPa
Body
Gasket
BarbThe tube allows easy tubing insertion as well as secure tubing holding.
BodyStainless steel 316
BodyStainless steel 316
TubingHose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing.
Cap nutSecure holding is achieved by manual tightening.Easy disconnection of tubing by loosening.Stainless steel 316
GasketSmall tightening torque.Secure sealing.
BarbThe tube allows easy tubing insertion as well as secure tubing holding.
Gasket
Tubing
Small tightening torque.Secure sealing.
Stainless Steel Miniature Fittings Series MS
Fitti
ngs
& T
ubin
g
1463FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Stainless Steel Miniature Fittings
Series MS
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread : M5
Applicable tubing material
Applicable tubing diameter
Max. operating pressure (At 20˚C)
Connection size
Material
Hose Nipple
Barb Fittings
Can be used in corrosive applications.
Stainless steel material (SUS316).
Compact piping space.The hose nipple has a large holding force, allowing easy connection and removal.
A wide variety of models is available.Piping in the same direction is possible at different heights.
Hose Nipple, Hose elbow.Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing.
Nylon Soft nylon
M5(JIS B0209, Class 2: Metric coarse thread)
1.0MPa
SUS316SUS 304, Aluminium
Polyurethane
ø4/ø2.5ø6/ø4
ø3.18/ø2.18 ø4/ø2.5ø6/ø4
ø3.18/ø2ø4/ø2.5, ø6/ø4
1.5MPa 0.8MPa
Body
Gasket
BarbThe tube allows easy tubing insertion as well as secure tubing holding.
BodyStainless steel 316
BodyStainless steel 316
TubingHose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing.
Cap nutSecure holding is achieved by manual tightening.Easy disconnection of tubing by loosening.Stainless steel 316
GasketSmall tightening torque.Secure sealing.
BarbThe tube allows easy tubing insertion as well as secure tubing holding.
Gasket
Tubing
Small tightening torque.Secure sealing.
Stainless Steel Miniature Fittings
Series M5ModelDescription
Barb fittings for soft tubing
To pipe soft nylon tubing.
Application
To pipepolyurethane tubing.
To pipe soft nylon, polyurethane tubing.
MS-5AU-3
MS-5AU-4
MS-5AU-6
Universal tee for soft tubing
MS-5ATHU-3
MS-5ATHU-4
MS-5ATHU-6
Barb elbow for soft tubing
Hose nipple
MS-5ALHU-3
MS-5ALHU-4
MS-5ALHU-6
To pipe nylon, soft nylon, polyurethane tubing.
MS-5H-4
MS-5H-6
Hose elbow
ModelDescription Application
• To pipe nylon, soft nylon, polyurethane tubing.• Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
Remark(s)
ø3.18/2.18X M5
ø3.18/2 X M5
ø4/2.5 X M5
ø6/4 X M5
ø3.18/2.18 X M5
ø3.18/2 X M5
ø4/2.5 X M5
ø6/4 X M5
ø4/2.5 X M5
ø6/4 X M5
ø4/2.5 X M5
ø6/4 X M5
Material:PVC
MS-5HLH-4
GasketSealant (M5 thread portion)M-5G1
Gasket (H)
M-5GH
Universal nippleBody rotates 360˚ around the stud axis.
MS-5UN
NippleTo connect fittings and equipment or to connect 2 fittings.
MS-5N
Extension fittingFor 3D piping to prevent interference between fittings.
MS-5J
PlugTo plug unused M5 port.MS-5P
BushingConnection from R1/8 piping to M5 fittings.
MS-5B
Universal tee
MS-5UT
Universal elbow Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
MS-5UL
MS-5HLH-6
ø3.18/2.18 X M5
ø3.18/2 X M5
ø4/2.5 X M5
ø6/4 X M5
Material:Nylon 66GF 30%
Only for MS-5ALHU-6, MS-5HLH-4, MS-5HLH-6 and MS-5ATHU-6.
Remark(s)
M5 male X M5 male
PAT
M5 male X M5 female
M5 male X M5 male
R1/8 X M5 female
M5 female X M5 female X M5 male
M5 female X M5 male
To pipe soft nylon tubing.
To pipepolyurethane tubing.
To pipe soft nylon,polyurethane tubing.
Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
To pipe soft nylon tubing.
To pipepolyurethane tubing.
To pipe soft nylon,polyurethane tubing.
Body rotates 360˚ around the stud axis. Position can be fixed after alignment.
Series KA Antistatic One-Touch Fittings
Fittings & Tubing
1464
Antistatic One-Touch Fittings
Applicable Tubing
Series KA
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread: M, Uni-thread
Air
1.0MPa
–100kPa
3.0MPa
0 to 40˚C
Unithread, screw
JIS B0209, Class 2 (Metric coarse thread)
Gasket
Brass parts are all electroless nickel plated.
104 to 107Ω
Tubing material
Tubing O.D.
Antistatic soft nylon, Antistatic polyurethane
ø3.2, ø4, ø6, ø8, ø10, ø12
Fluid
Max. operating pressure
Operating vacuum pressure
Proof pressure
Ambient and fluid temperature
Sealant (Thread portion)
Copper-free specifications
Surface resistance
One-touch collet mechanism.
Compatible with vacuum to 100 kPa of pressure.
Can be used for copper-free applications.
Flame resistant (Equivalent to UL-94 Standards V-0).
Conductive resin is used for the body sealant of fittings
Mounting thread
PackingCompatible with a wide range of pressure, from low vacuum to 1.0 MPa.The special shape ensures sealing and reduces resistance of tubing insertion.
ChuckLarge retaining force.Secure engagement with chuck and large retaining force with collet.
Effective for piping in confined space.The body and thread portion can be rotated. (For positioning)
Requires little force for removal.Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing.
ColletGuide
Tubing
Release button (Black)
Body
O-ring
Stud
Gasket
Uni thread
Antistatic One-Touch Fittings Series KA
Fitti
ngs
& T
ubin
g
1465FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Antistatic One-Touch Fittings
KAH Male Connector
3.2
4
6
8
10
12
M5 M6
M6 M5
M6 M5
KAH23-M5 -M6
-U01KAH04-M5
-M6 -U01 -U02
KAH06-M5 -M6
-U01 -U02 -U03KAH08-U01
-U02 -U03KAH10-U01
-U02 -U03 -U04KAH12-U02
-U03 -U04
Most common style used to pipe from female thread in the same direction.
Applicabletubing O.D.
mmConnecting
threadModel
3.2
4
6
8
10
12
M5 M6
M6 M5
M6 M5
KAL23-M5 -M6
-U01KAL04-M5
-M6 -U01 -U02
KAL06-M5 -M6
-U01 -U02 -U03KAL08-U01
-U02 -U03KAL10-U01
-U02 -U03 -U04KAL12-U02
-U03 -U04
Most common style used to pipe from female thread at a right angle.
Applicabletubing O.D.
mm
Connecting thread Model
3.2
4
6
8
10
12
M5 M6
M6 M5
M6 M5
KAT23-M5 -M6
-U01KAT04-M5
-M6 -U01 -U02
KAT06-M5 -M6
-U01 -U02 -U03KAT08-U01
-U02 -U03KAT10-U01
-U02 -U03 -U04KAT12-U02
-U03 -U04
To branch the line from the female thread at 90˚ in each direction.
Applicabletubing O.D.
mm
Connecting thread Model
3.2
4
6
8
10
12
M5 M6
M6 M5
M6 M5
KAY23-M5 -M6
-U01KAY04-M5
-M6 -U01 -U02
KAY06-M5 -M6
-U01 -U02 -U03KAY08-U01
-U02 -U03KAY10-U01
-U02 -U03 -U04KAY12-U02
-U03 -U04
To branch the line from the female thread in the same direction and at 90˚.
Applicabletubing O.D.
mm
Connecting thread
Model
Uni 1/8
Uni 1/8Uni 1/4
Uni 1/8Uni 1/4Uni 3/8Uni 1/8Uni 1/4Uni 3/8Uni 1/8Uni 1/4Uni 3/8Uni 1/2Uni 1/4Uni 3/8Uni 1/2
Uni 1/8
Uni 1/8Uni 1/4
Uni 1/8Uni 1/4Uni 3/8Uni 1/8Uni 1/4Uni 3/8Uni 1/8Uni 1/4Uni 3/8Uni 1/2Uni 1/4Uni 3/8Uni 1/2
Uni 1/8
Uni 1/8Uni 1/4
Uni 1/8Uni 1/4Uni 3/8Uni 1/8Uni 1/4Uni 3/8Uni 1/8Uni 1/4Uni 3/8Uni 1/2Uni 1/4Uni 3/8Uni 1/2
Uni 1/8
Uni 1/8Uni 1/4
Uni 1/8Uni 1/4Uni 3/8 Uni 1/8Uni 1/4Uni 3/8Uni 1/8Uni 1/4Uni 3/8Uni 1/2Uni 1/4Uni 3/8Uni 1/2
KAT Male Branch Tee
KAL Male Elbow KAY Male Run Tee
Series KA Antistatic One-Touch Fittings
Fittings & Tubing
1466
Antistatic One-Touch Fittings
KAU Union “Y” KAT Branch Tee
3.2
4
6
8
10
12
M5 M6
M6 M5
M6 M5
KAU23-M5 -M6
-U01KAU04-M5
-M6 -U01 -U02
KAU06-M5 -M6
-U01 -U02 -U03KAU08-U01
-U02 -U03KAU10-U02
-U03 -U04KAU12-U02
-U03 -U04
To branch tubing in the same direction.
Applicabletubing O.D.
mmConnecting
threadModel
3.24681012
KAH23-00KAH04-00KAH06-00KAH08-00KAH10-00KAH12-00
To connect tubing in the same direction.
Applicable tubing O.D.mm
Model
3.24681012
KAL23-00KAL04-00KAL06-00KAL08-00KAL10-00KAL12-00
To connect tubing at right angles to each other.
Applicable tubing O.D.mm
Model
3.24681012
KAT23-00KAT04-00KAT06-00KAT08-00KAT10-00KAT12-00
To branch a tubing into 2 directions each at 90˚ to the original one.
Applicable tubing O.D.mm
Model
3.2468
1012
KAU23-00KAU04-00KAU06-00KAU08-00KAU10-00KAU12-00
To branch tubing in the same direction.
Applicable tubing O.D.mm
Model
KAH23-04KAH04-06KAH06-08KAH08-10KAH10-12
To connect tubing of different diameters.
Applicable tubing O.D.mm Model
3.2468
10
b4681012
Uni 1/8
Uni 1/8Uni 1/4
Uni 1/8Uni 1/4Uni 3/8Uni 1/8Uni 1/4Uni 3/8Uni 1/4Uni 3/8Uni 1/2Uni 1/4Uni 3/8Uni 1/2
aa b
KAR23-04KAR04-06
-08 -10KAR06-08
-10 -12KAR08-10
-12KAR10-12
To connect to a smaller one-touch fitting.
Applicabletubing O.D.
mm
Fitting size Model
3.2
4
6
8
10
4681081012101212
KAU Union “Y”
KAH Different Dia. Straight
KAR Plug-In Reducer
KAH Straight Union
KAL Union Elbow
Clean One-Touch Fittings Series KP
Fitti
ngs
& T
ubin
g
1467FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Clean One-Touch Fittings (For Air Blow Applications)
Recommended Applicable Tubing
Series KP
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread: R
Particle generation grade
Fluid
Max. operating pressure (20˚C)
Operating vacuum pressure
Proof pressure (20˚C)
Ambient and fluid temperature
Thread
Grade 1Air, Nitrogen gas, Water (Pure water)
1MPa–100kPa
3MPa–5 to 80˚C (With no condensation)JIS B0203 (Taper thread for piping)
Tubing material
Tubing O.D.
Polyolefin: Series TPHSoft polyolefine: Series TPS
ø4, ø6, ø8, ø10, ø12
Completely oil free.Tube sizes 4mm to 12mm avaiable.Liquid contact parts are non-metal.Components are washed, assembled and double packed in a clean room.Compatible with vacuum pressure (-100kPa).
Polyurethane tubing: Series TU, Nylon tubing: Series T, Soft nylon tubing: Series TS also can be used though with lower degree of cleanliness.
Note 1) Refer to the particle generation grade classifications.Note 2) Contact SMC for other types of fluids.Note 3) The max. operating pressure is one at 20˚C.Note 4) When water is used as the operating fluid, do not allow the surge pressure to exceed the max. operating pressure.
Series KP is designed for clean blow and use in washing lines. Consult SMC for use in other applications.
Sealant material: EPDM does not have sufficient resistance to mineral oil and is not suitable for piping of general pneumatic equipment.
Note 1)
Note 2)
Note3)
Particle GenerationGrade Classifications
0.1 0.2Particle Diameter m or less
Aver
age
parti
cle
conc
entra
tion
parti
cles
/ft3
0.3 0.5 1
10-1
100
101
102
103
104
Grade 4
Grade 3
Grade 2
Grade 1Caution
Polyolefin resin
SUS304 stainless steelThe chuck provides a secure bite, while holding force isincreased by the collet.
EPDMHolds the cushion and secures the seal.Suppresses sliding of the seal to prevent generation of particulates.
SUS304stainlesssteel
Polypropylene resin
EPDMSpecial configuration for reliable sealing and low resistance when inserting tube.
SUS304 stainless steelThe body can be rotated to position the piping entry (For positioning purpose).
Releases the chuck collet when tubing is removed. Also prevents the chuck from biting excessively into the tubing.
Release button
Stopper dust check
GuideCollet
Polypropylene resinBody
Polypropylene resinStud
Seal (Oil free)
EPDMO-ring (Oil free)
EPDMCushion (Oil free)
Drive bushing Chuck
Clean tubing
PolypropyleneLight force for removal
PAT.
Series KP Clean One-Touch Fittings
Fittings & Tubing
1468
KPH Male Connector
Clean One-Touch Fittings
KPY Male Run Tee
KPL Male Elbow KPU Union “Y”
KPT Male Branch Tee KPH Straight Union
4
6
8
10
12
KPH04-01 -02KPH06-01
-02KPH08-01
-02KPH10-02
-03KPH12-03
-04
Most common style used to pipe from female thread in the same direction.
Applicabletubing O.D.
mmConnecting
threadModel
4
6
8
10
12
KPL04-01 -02
KPL06-01 -02
KPL08-01 -02
KPL10-02 -03
KPL12-03 -04
Most common style used to pipe from female thread at a right angle.
Applicabletubing O.D.
mmConnecting
threadModel
4
6
8
10
12
KPT04-01 -02
KPT06-01 -02
KPT08-01 -02
KPT10-02 -03
KPT12-03 -04
To branch the line from the female thread at 90 in each direction.
Applicabletubing O.D.
mmConnecting
threadModel
4
6
8
10
12
KPY04-01 -02
KPY06-01 -02
KPY08-01 -02
KPY10-02 -03
KPY12-03 -04
To branch the line from the female thread in the same direction and at 90˚.
Applicabletubing O.D.
mmConnecting
threadModel
4
6
8
10
12
KPU04-01 -02KPU06-01
-02KPU08-01
-02KPU10-02
-03KPU12-03
-04
To branch tubing in the same direction.
Applicabletubing O.D.
mmConnecting
threadModel
4681012
KPH04-00KPH06-00KPH08-00KPH10-00KPH12-00
To connect tubing in the same direction.
Applicable tubing O.D.mm
Model
R1/8R1/4R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2
R1/8R1/4R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2
R1/8R1/4R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2
R1/8R1/4R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2
R1/8R1/4R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2
Clean One-Touch Fittings Series KP
Fitti
ngs
& T
ubin
g
1469FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
KPL Union Elbow
Clean One-Touch Fittings
KPR Plug In Reducer
4
6
8
10
KPR04-06 -08
KPR06-08 -10
KPR08-10 -12
KPR10-12
To connect to a smaller one-touch fitting.
Applicabletubing O.D.
mmModel
4681012
KPL04-00KPL06-00KPL08-00KPL10-00KPL12-00
To connect tubing at right angles to each other.
Applicable tubing O.D.mm
Model
4681012
KPT04-00KPT06-00KPT08-00KPT10-00KPT12-00
To branch tubing into 2 directions each at 90˚ to the original one.
Applicable tubing O.D.mm
Model
4681012
KPP-04KPP-06KPP-08KPP-10KPP-12
To plug unused one-touch fittings.
Fitting size Model
468
1012
KPU04-00KPU06-00KPU08-00KPU10-00KPU12-00
To branch tubing in the same direction.
Applicable tubing O.D.mm
Model
Fitting size
688
10101212
KPT Union Tee KPP Plug
KPU Union “Y”
Series KPQ/KPG Clean One-Touch Fittings
Fittings & Tubing
1470
PAT.
MDriving air piping system
Drain pipingPiping for regulator breathing
Exhaust piping for solenoid valve
Relief port piping
Inside clean roomClean fittings KPQ/KPG
In case of half union
KPQ: Light greyKPG: Light blue
Release ButtonPolypropylene
StudKPQ: Brass (Electroless nickel plated)KPG: Stainless (SUS304)
BodyPolypropylene Body
KPQ: Brass (Electroless nickel plated)KPG: Stainless (SUS304)
Clean One-Touch Fittings
Series KPQ/KPG
Specifications
Features
Applicable tubing O.D.: Metric Size Connecting thread: M, R
Particle generation grade
Fluid
Max. operating pressure (20˚C)
Operating vacuum pressure
Proof pressure (20˚C)
Ambient and fluid temperature
Thread
Grade 1Air
1MPa–100kPa
3MPa–5 to 60˚C (With no condensation)JIS B0203 (Taper thread for piping)
Wide range of port sizes of M5 to 1/2”
Use of Polypropylene for resin parts.
Tube size Ø 4mm - 12mm available.
Low particle generation suitable for clean room application.
Note 1) Refer to the particle generation grading chart. Internal parts are not included in the grading because of greasing on sealant.Note 2) The max. operating pressure is one at 20˚C.
Note 1)
Note 2)
Particle Generation Grading
0.1 0.2Particle Diameter µm or less
Aver
age
parti
cle
conc
entra
tion
parti
cles
/ft3
0.3 0.5 1
10-1
100
101
102
103
104
Grade 4
Grade 3
Grade 2
Grade 1
Recommended Applicable Tubing
Tubing material
Tubing O.D.
Polyurethane: Series 10-Nylon tubing: Series T, Soft nylon tubing: Series T and Series TS soft nylon tubing can also be used through with lower degree of cleanliness.
ø4, ø6, ø8, ø10, ø12
Series KPGStainless steel 304Release button: Light blue
Series KPQBrass (electroless nickel plated)Release button: Light gray
Polypropylene resin
Stainless steel 304
Polypropylene resinNBR
Brass (Electroless nickel plated)
Brass (Electroless nickel plated)
Stainless steel 304
Stainless steel 304
Series KPQ Series KPGModelBodyStudChuckGuide, StopperCollet, Release buttonSeal, O-ring, Bumper
Principal Parts Material
Clean One-Touch Fittings Series KPQ/KPG
Fitti
ngs
& T
ubin
g
1471FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
KPQH/KPGH Male Connector
Clean One-Touch Fittings
KPQT/KPGT Union Tee
KPQL/KPGL Male Elbow KPQY/KPGY Male Run Tee
4
6
8
10
12
KPQH04-M5KPQH04-01KPQH04-02KPQH06-M5KPQH06-01KPQH06-02KPQH08-01KPQH08-02KPQH10-02KPQH10-03KPQH12-03KPQH12-04
KPGH04-M5KPGH04-01KPGH04-02KPGH06-M5KPGH06-01KPGH06-02KPGH08-01KPGH08-02KPGH10-02KPGH10-03KPGH12-03KPGH12-04
Most common style used to pipe from female thread in the same direction.
Applicabletubing O.D.
mmConnecting
threadModel
Most common style used to pipe from female thread at a right angle.
To branch the line from the female thread in the same direction and at 90˚.
KPQH KPGH
4
8
10
12
6
KPQL04-M5KPQL04-01KPQL04-02KPQL06-M5KPQL06-01KPQL06-02KPQL08-01KPQL08-02KPQL10-02KPQL10-03KPQL12-03KPQL12-04
KPGL04-M5KPGL04-01KPGL04-02KPGL06-M5KPGL06-01KPGL06-02KPGL08-01KPGL08-02KPGL10-02KPGL10-03KPGL12-03KPGL12-04
Applicabletubing O.D.
mmConnecting
threadModel
KPQL KPGL
4
8
10
12
6
KPQY04-M5KPQY04-01KPQY04-02KPQY06-M5KPQY06-01KPQY06-02KPQY08-01KPQY08-02KPQY10-02KPQY10-03KPQY12-03KPQY12-04
KPGY04-M5KPGY04-01KPGY04-02KPGY06-M5KPGY06-01KPGY06-02KPGY08-01KPGY08-02KPGY10-02KPGY10-03KPGY12-03KPGY12-04
Applicabletubing O.D.
mmConnecting
threadModel
KPQL KPGL
To branch a tubing into 2 directions each at 90˚ to the original one.
4
8
10
12
6
KPQT04-M5KPQT04-01KPQT04-02KPQT06-M5KPQT06-01KPQT06-02KPQT08-01KPQT08-02KPQT10-02KPQT10-03KPQT12-03KPQT12-04
KPGT04-M5KPGT04-01KPGT04-02KPGT06-M5KPGT06-01KPGT06-02KPGT08-01KPGT08-02KPGT10-02KPGT10-03KPGT12-03KPGT12-04
Applicabletubing O.D.
mmConnecting
threadModel
KPQT KPGT
<M5>
<R>
<M5>
<R>
<M5><M5>
<R><R>
M5
M5
R1/8R1/4
R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2
M5
M5
R1/8R1/4
R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2
M5
M5
R1/8R1/4
R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2
M5
M5
R1/8R1/4
R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2
Series KPQ/KPG Clean One-Touch Fittings
Fittings & Tubing
1472
KPQU/KPGU Union “Y” KPQT/KPGT Union Tee
KPQH/KPGH Straight Union
KPQU/KPGU Union “Y”
4681012
KPQH04-00KPQH06-00KPQH08-00KPQH10-00KPQH12-00
KPGH04-00KPGH06-00KPGH08-00KPGH10-00KPGH12-00
To connect tubing in the same direction.
Applicable tubing O.D.mm
Model
To branch tubing in the same direction.
4
8
10
12
6
KPQU04-M5KPQU04-01KPQU04-02KPQU06-M5KPQU06-01KPQU06-02KPQU08-01KPQU08-02KPQU10-02KPQU10-03KPQU12-03KPQU12-04
KPGU04-M5KPGU04-01KPGU04-02KPGU06-M5KPGU06-01KPGU06-02KPGU08-01KPGU08-02KPGU10-02KPGU10-03KPGU12-03KPGU12-04
Applicabletubing O.D.
mmConnecting
threadModel
KPQU KPGU
KPQH KPGH
4681012
KPQL04-00KPQL06-00KPQL08-00KPQL10-00KPQL12-00
KPGL04-00KPGL06-00KPGL08-00KPGL10-00KPGL12-00
Applicable tubing O.D.mm
Model
KPQL KPGL
To connect tubing at right angles to each other.
468
1012
KPQT04-00KPQT06-00KPQT08-00KPQT10-00KPQT12-00
KPGT04-00KPGT06-00KPGT08-00KPGT10-00KPGT12-00
Applicable tubing O.D.mm
Model
KPQT KPGT
To branch a tubing into 2 directions each at 90˚ to the original one.
468
1012
KPQU04-00KPQU06-00KPQU08-00KPQU10-00KPQU12-00
KPGU04-00KPGU06-00KPGU08-00KPGU10-00KPGU12-00
Applicable tubing O.D.mm
Model
KPQU KPGU
To branch tubing in the same direction.
4
6
8
10
68810101212
Model
KPQR KPGR
To connect to a smaller one-touch fitting.
Applicabletubing O.D.
mm
Fitting size
KPQR04-06KPQR04-08KPQR06-08KPQR06-10KPQR08-10KPQR08-12KPQR10-12
KPGR04-06KPGR04-08KPGR06-08KPGR06-10KPGR08-10KPGR08-12KPGR10-12
4681012
KPP-04KPP-06KPP-08KPP-10KPP-12
To plug unused one-touch fittings.
Fitting size Model
<M5>
<R>
M5
M5
R1/8R1/4
R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2
KPQL/KPGL Elbow
KPQR/KPGR Plug In Reducer
KPP Plug
Clean One-Touch Fittings
Nylon Tubing Series T
Fitti
ngs
& T
ubin
g
1473FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Nylon Tubing
Series TFeatures
Suitable for piping in confined space.
20m and 100m coils
6 colour options.
T 04 25 B 20Length per roll
Symbol Length20100
20m roll100m roll (Black & White only)
Colour indicationSymbol Colour
BWR
BUYG
BlackWhiteRedBlue
YellowGreen
Tubing I.D.
Tubing O.D.
Model/Specifications
How to Order
Burst Pressure Characteristics and Operating Pressure Curve
Model
Air/Water
1.5 MPa
Refer to the burst pressure characteristics curve.
–20˚C to +60˚C (Water: 0 to 40˚C) (No freezing)
Nylon 12
Fluid
Max.operatingpressure(at 20˚C)
Burstpressure
Min.bendingradius (mm)
OperatingtemperatureMaterial
Metric size (Series T)Tubing size
T042542.5
T040343
T060464
T064564.5
T080686
T1075107.5
T1209129
T16131613
Tubing O.D. (mm)Tubing I.D. (mm)
White (W)
Red (R)
Blue (BU)
Yellow (Y)
Green (G)
Black (B)
75604836242513 100
5 32" 5 16"
Note) Imperial sizes also available on request.
Series TS Soft Nylon Tubing
Fittings & Tubing
1474
Soft Nylon Tubing
Series TSFeatures
Tubing Size: Metric Size
20m and 100m coils
6 colour options
Pliable for tighter bend radii
TS 06 04 W 100Length per roll
Symbol Length20100
20m roll100m roll (Black & White only)
Colour indicationSymbol Colour
BWR
BUYG
BlackWhiteRedBlue
YellowGreen
Tubing I.D.
Tubing O.D.
Model/Specifications
How to Order
Burst Pressure Characteristics and Operating Pressure Curve
Model
Air
1.0 MPa
Refer to the burst pressure characteristics curve.
–20˚C to +60˚C (No freezing)
Nylon 11, Nylon 12
Metric size (Series TS)Tubing size
TS04254 2.5
TS060464
TS080686
TS107510 7.5
TS120912
9
TS16121612
Tubing O.D. (mm)Tubing I.D. (mm)
White (W)
Red (R)
Blue (BU)
Yellow (Y)
Green (G)
Black (B)
12 15 23 27 31 60
5 32" 5 16"
— 20 m roll — 100 m roll (TS1612 is reel.)
Fluid
Max. operatingpressure (at 20˚C)
Burst pressure
Min. bending radius (mm)
Operating temperatureMaterial
Note) Imperial sizes also available on request.
Polyurethane Tubing Series TU
Fitti
ngs
& T
ubin
g
1475FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Polyurethane Tubing
Series TU
Model/Specifications
Features
Tubing Size: Metric Size
Flexible Tubing sizes 2mm to 16mm OD
For general industrial air and water applications.
20m and 100m coils.
29 colour options.
Available in metric size (TU).
Imperial sizes available on request.
TU 04 25 BU 20Length per roll
Symbol Length20
10020m roll
100m rollColour indicationSymbol Colour
BWR
BUYGCYR
BlackWhiteRedBlue
YellowGreen
TransparentOrange
Tubing I.D.Tubing O.D.
How to Order
Model
Fluid Air/Water
0.8 MPa
Refer to the burst pressure characteristics curve.
–20 to +60˚C (Water: 0 to 40˚C) (No freezing)
Polyurethane
Max. operating pressure at 20˚CBurst pressureMin. bending radius (mm)
Operating temperatureMaterial
Metric size (Series TU)Tubing size
TU04254 2.5
TU060464
TU080585
TU106510 6.5
TU120812 8
TU16101610
Tubing O.D. (mm)Tubing I.D. (mm)
Black (B)
White (W)
Red (R)
Blue (BU)
Yellow (Y)
Green (G)
Clear (C)
Orange (YR)
10 15 20 27 35 45
5 32" 5 16"
— 20 m roll — 100 m roll (TU1610 is reel.)
Burst Pressure Characteristics and Operating Pressure Curve
4
TU02122 1.2
ø2 Polyurethane TubingSeries TU
Extra colours
Black (B)
Yellow (Y)
Green (G)
Clear (C)
Orange (YR)
Solid blue (BU1)
Clear blue (BU2)
Medium blue (BU3)
Brown (BR1)
Solid green (G1)
Clear green (G2)
Red (R)
White (W)
Blue (BU)
Neon green (G3)
Neon yellow (Y3)
Solid purple (PU1)
Clear purple (PU2)
Solid yellow (Y1)
Clear yellow (Y2)
Solid red (R1)
Clear red (R2)
Clear orange (YR1)
Neon or ange (YR2)
Silver (S1)
Gray (GR1)
Dark green (G4)
Light gray (GR2)
Neon pink (P1)
Series TUS Soft Polyurethane Tubing
Fittings & Tubing
1476
Soft Polyurethane Tubing
Series TUS
Series
Features
Tubing Size: Metric Size
Suitable for piping in confined space.
20m and 100m coils
8 colour options.
TUS 10 65 B 100Length per roll
Symbol Length20
10020m roll
100m roll (Black & blue only)
Colour indicationSymbol Colour
BWR
BUYGNYB
BlackWhiteRedBlue
YellowGreen
TranslucentYellow brown
Tubing I.D.
Tubing O.D.
Specifications
How to Order
Burst Pressure Characteristics and Operating Pressure Curve
ModelO.D. mmI.D. mm
FluidMax. operating pressure (20˚C)Burst pressureApplicable fittingMin. bending radius mmOperating temperatureMaterial
Metric sizeTubing
TUS04254
2.5
TUS060464
TUS080585
TUS1065106.5
TUS1208128
Black (B)
White (W)
Red (R)
Blue (BU)
Yellow (Y)
Green (G)
Translucent (N)
Yellow brown (YB)
–20m roll –100m reel
Inner SleeveSeries TJReinforces soft polyurethane tubing connected to one-touch fitting.Insert an inner sleeve into soft polyurethane tubing.
Model Length1819
20.52324
TJ-0425TJ-0604TJ-0805TJ-1065TJ-1208
Applicabletubing model
TUS0425TUS0604TUS0805TUS1065TUS1208Tubing drawing
strength N(with one-touch fitting)
Without inner sleeve
With inner sleeve
Air0.6MPa
Refer to burst pressure characteristics curve.One-touch fitting, insert fittings, hose nipple
–20 to 60˚C (With no freezing)Polyurethane
8 15 15 22 29
15 60 60 85 110
80 230 250 300 480
Note 1) Not transparent but translucent owing to the material.
Note 1)
Model
TUS Related Accessories
Soft Polyurethane Tubing Series TUS
Fitti
ngs
& T
ubin
g
1477
FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Wear Resistant Tubing
Series TUZFeatures
Made of special polyurethane.
Sliding motion abration reduction to aprox. 1/3of the TU Series.
Flexible tubing sizes 4mm to 12mm OD.
6 Colour variations
How to Order
TUZ0425 BU 20Tubing model
ModelTUZ0425TUZ0604TUZ0805TUZ1065TUZ1208
O.D. x I.D. (mm) 4 x 2.5 6 x 4 8 x 510 x 6.512 x 8
ColourSymbol
BWR
BUYG
ColourBlackWhiteRedBlue
YellowGreen
Length per rollSymbol20
100
Length20 m roll
100 m roll
Burst Pressure Characteristics Curve and Operating Pressure
Temperature (C)
0–20
4.0
3.0
2.0
1.0
0
Pres
sure
(MPa
)
20 40 60
Burst pressure
Maximum operating pressure
Note 1) The minimum bending radius means the value measured by the method shown in the figure at the right at the temperature of 20C when the tube is bent. The minimum bending radius assumes static piping. If the tube is used in a moving part, provide extra length to the tube. Check the bending radius recommended by the flexible protection tube manufacturer to assure that the tube is used in the flexible protection tube.
Note 2) Not clear, but opaque due to material.
TUZ1208 — 20 m roll — 100 m roll
Model128
TUZ1065106.5
TUZ080585
TUZ060464
TUZ04254
2.5Tubing O.D. (mm)Tubing I.D. (mm)
Black (B)
White (W)
Red (R)
Blue (BU)
Yellow (Y)
Green (G)
Fluid
Burst pressureMin. bending radius (mm)Operating temperatureMaterial
Applicable fittings
Max. operating pressure
20C60C
Air
0.8 MPa0.4 MPa
Refer to the burst pressure characteristics curve.
–20 to +60CSpecial polyurethane
10 15 20 27 35
One-touch fittings KQ/KJ series,Insert fittings KF series, Stainless steel 316 insert fittings KFG series,Miniature fittings M/MS series (hose nipple type)
Specifications
Model
Series TUH Hard Polyurethane Tubing
Fittings & Tubing
1478
Hard Polyurethane Tubing
Series TUH
Series
Features
Tubing Size: Metric Size
2 variants, high pressure and standard.
4 colour choices.
Smaller bending radii than nylon tubing.
Improved maximum operating pressures above 0°C compared to standard polyurethane.
TUH 06 04 B 20Length per roll
Symbol Length20100
20m roll100m roll
Colour indicationSymbol Colour
BWBUN
BlackWhiteBlue
Translucent
Tubing I.D.
Tubing O.D.
Specifications
How to Order
Note 1) Consult SMC regarding other fluids. Water cannot be used because of occurrence of hydrolysis.Note 2) The maximum operating pressure is the value at 20˚C. Refer to the burst pressure characteristics and
operating pressure curve for other temperatures. Abnormal temperature rises due to adiabatic compression can cause tubing to burst.
Note 3) The minimum bending radius is measured at 20˚C based on the method shown in the figure at the left. At higher temperatures, breakage or flattening may occur even with a value larger than the minimum bending radius.
Model O.D. mmI.D. mmModel
O.D. mmI.D. mm
Standard
High pressure
Fluid
Burst pressureOperating temperatureMaterial
Metric sizeTubing
TUH04284
2.8TUH0425
42.5
TUH060464
TUH080585
TUH1065106.5
TUH1208128
TUH06446
4.4
TUH08588
5.8
TUH1073107.3
TUH1288128.8
Black (B)Opal (W)Blue (BU)Translucent (N)
–20m roll –100m
Air Note 1)
0.8MPa Note 2)
1.0MPa Note 2)
Refer to burst pressure characteristics curve.–20 to 60˚CPolyurethane
10 18 24 30 3610 15 20 27 35
Max. operating pressure (20˚C)
Min. bending radius mm
Standard typeHigh pressure typeStandard typeHigh pressure type
Standard type
High pressure type
Burst Pressure Characteristics and Operating Pressure Curve
5
4
3
2
1
0-20 0 20
Operating temperature ˚C
Burs
t pre
ssur
e M
Pa
40 60
Max. operating pressure
5
6
7
4
3
2
1
0-20 0 20
Operating temperature ˚C
Burs
t pre
ssur
e M
Pa
40 60
Max. operating pressure
Standard type
High pressure type
Polyurethane Coil Tubing Series TCU
Fitti
ngs
& T
ubin
g
1479FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Polyurethane Coil Tubing
Series TCU
Coil Tubing
Features
Tubing Size: Metric SizeSpecifications
Model
O.D.
4
6
8
I.D.
1231231
1.5
12
1.512
Max. operating length mNumber of rolls Model
2.5
4
5
colour
Black (B)Black (B)Black (B)Black (B)Black (B)Black (B)Black (B)
TCU0425B-1
1
TCU0425B-2
24
2.5
TCU0425B-3
3
TCU0604B-1
1
Air Note 1)
0.8MPaRefer to burst pressure characteristics curve.
–20 to 60˚CPolyurethane
Black
TCU0604B-2
264
TCU0604B-3
3
TCU0805B-1
185
Note 1) Consult SMC regarding other fluids.Note 2) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid
abnormal temperature rises due to adiabatic compression.
Number of coresTubing O.D. mmTubing I.D. mmFluidMax. operating pressure (20˚C)Burst pressureOperating temperatureMaterialcolour
TCU0425B-1TCU0425B-2TCU0425B-3TCU0604B-1TCU0604B-2TCU0604B-3TCU0805B-1
Burst Pressure Characteristics and Operating Pressure Curve
Note 2)
Single or multi-core option.
For flexible piping applications.
For compact piping.
Series TFU Polyurethane Flat Tubing
Fittings & Tubing
1480
Polyurethane Flat Tubing
Series TFU
10m Roll
Features
Tubing Size: Metric SizeSpecifications
2 or 3 core flat tubing for neat presentation.
For flexible piping applications.
For compact piping.
TFU 04 25 B 2Number of cores
Symbol Number of cores23
23
Colour indicationSymbol Colour
B BlackTubing I.D.
Tubing O.D.
Model
2 3 2 3 2
TFU0425B-2
TFU0425B-3
TFU0604B-2
TFU0604B-3
TFU0805B-2
TFU0805B-3
34
2.5
10
64
Air Note 1)
0.8 MPaRefer to burst pressure characteristics curve.
–20 to 60˚C (With no condensation)Polyurethane
Black1510
85
20
Number of coresTubing O.D. mmTubing I.D. mmFluidMax. operating pressure (20˚C)Burst pressureOperating temperatureMaterialColourMin. bending radius mmTubing length per roll (m)
Note 1) Consult SMC regarding other fluids. Avoid abnormal temperature rises due to adiabatic compression.
TFU0425B-2TFU0425B-3TFU0604B-2TFU0604B-3TFU0805B-2TFU0805B-3
O.D. I.D. Number of rollsColour (Colour symbol) ModelBlack (B)Black (B)Black (B)Black (B)Black (B)Black (B)
4
6
8
2.5
4
5
232323
How to Order
FR Soft Nylon Coil Tubing Series TRS
Fitti
ngs
& T
ubin
g
1481
FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Flame Resistant Soft Nylon TubingSeries TRS
Series
Features
Tubing Size: Metric Size
Specifications
Burst Pressure Characteristics and Operating Pressure Curve
How to Order TRS 10 65 B 100Length per roll
Symbol Length20
10020m roll
100m on reel
Colour indication
Tubing I.D.
Tubing O.D.Symbol Colour
BWR
BUG
BlackWhiteRedBlue
Green
ModelO.D. mmI.D. mm
FluidMax. operating pressure (20˚C)Burst pressureMin. bending radius mmOperating temperatureMaterial
Metric sizeTubing
TRS060363
TRS080585
TRS1065106.5
TRS1208128
Black (B)White (W)Red (R)Blue (BU)Green (G)
Air, Water1.2MPa
Refer to burst pressure characteristics curve.
–20 to 60˚C, Water: 0 to 60˚C (With no condensation)Flame resistant nylon (Equivalent to UL-94 Standards V-0)
17 19 27 32
Flame resistant tubing(equivalent to UL-94 Standards V-0).
Applicable to general pneumatic and water piping in a spark atmosphere such as in spot welding.
–20m roll –100m on reel
Series TRB FR Double Layer Tubing
Fittings & Tubing
1482
Flame Resistant Double Layer Tubing
Series TRB
Series
Features
Tubing Size: Metric Size
Specifications
Burst Pressure Characteristics and Operating Pressure Curve
How to Order
TRB 10 75 B 100Length per roll
Symbol Length20100
20m roll100m on reel
Colour indication
Tubing I.D.
Tubing O.D.Symbol Colour
BWR
BUYG
BlackWhiteRedBlue
YellowGreen
Flame resistant (equivalent to UL-94 Standards V-0)
Applicable to general pneumatic and water piping in a spark atmosphere such as in spot welding.
Double layer design using flame resistant resin (equivalent to UL-94 Standard V-0) for outer layer.
FluidMax. operating pressure (20˚C)Burst pressure
Air, Water Note 2)
1.0MPaRefer to burst pressure characteristics curve.
Nylon 11PVC (Equivalent to V-0 in UL-94 Standards)
–20 to 60˚C, Water: 0 to 60˚C (With no condensation)
Inner tubing O.D. mmInner tubing I.D. mmOuter layer thickness mm
Min. bending radius mm
Metric sizeTubing
TRB0604641
15 28 35 45
TRB0806861
TRB1075107.51
TRB12091291
Black (B)White (W)Red (R)Blue (BU)Yellow (Y)Green (G)
–20m roll –100m on reel
Note 1)
Operating temperatureInner tubingOuter layer
Note 1) The inner tubing are all black.Note 2) Applicable to general industrial water. Consult SMC for use of other types of fluids. Keep the surge pressure below the maximum operating temperature.Note 3) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression.
Material
Tool to peel off outer layer tubing.
Inner tubingSoft Nylon
Outer layer
FR double layer tubing (Sectional view)
Out
er la
yer c
olou
r
Model
Note 3)
Related Accessories
Tubing Cutter Series TKS
FR Double Layer Polyurethane Tubing Series TRBU
Fitti
ngs
& T
ubin
g
1483FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Flame Resistant Double Layer Polyurethane Tubing
Series TRBU
Series
Features
Tubing Size: Metric Size
Specifications
Burst Pressure Characteristics and Operating Pressure Curve
How to Order
TRBU 10 65 B 100Length per roll
Symbol Length20100
20m roll100m on reel
Colour indication
Tubing I.D.
Tubing O.D.Symbol Colour
BWR
BUYG
BlackWhiteRedBlue
YellowGreen
Flame resistant (equivalent to UL-94 Standards V-0)
Applicable to general pneumatic and water piping in a spark atmosphere such as in spot welding.
Double layer design using flame resistant resin (equivalent to UL-94 Standard V-0) for outer layer.
Inner tubing material: Polyurethane
FluidMax. operating pressure (20˚C)Burst pressure
Air, Water Note 2)
0.8MPaRefer to burst pressure characteristics curve.
PolyurethanePolyolefin resin (Equivalent to V-0 in UL-94 Standards)
–20 to 60˚C, Water: 0 to 40˚C (With no condensation)
Inner tubing O.D. mmInner tubing I.D. mmOuter layer thickness mm
Min. bending radius mm
Metric sizeTubing
TRBU0604641
15 20 27 35
TRBU0805851
TRBU1065106.51
TRBU12081281
Black (B)White (W)Red (R)Blue (BU)Yellow (Y)Green (G)
–20m roll –100m on reel
Note 1)
Operating temperatureInner tubingOuter layer
Note 1) The inner tubing are all black.Note 2) Applicable to general industrial water. Consult SMC for use of other types of fluids. Keep the surge pressure below the maximum operating temperature.Note 3) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression.Note 4) The value at a temperature of 20˚C.
Material
Tool to peel off outer layer tubing.
Inner tubingPolyurethane
Outer layer
FR double layer polyurethane tubing (Sectional view)
5.0
4.0
3.0
2.0
1.0
0-20 0 20
Operating temperature ˚C
Burs
t pre
ssur
e M
Pa
40 60
Burst pressure
Max. operating pressure
Out
er la
yer c
olou
r
Model
Note 3)
Note 4)
Related Accessories
Tubing Cutter Series TKS
Series TAU Antistatic Polyurethane Coil Tubing
Fittings & Tubing
1484
Antistatic Polyurethane Tubing
Series TAU
Series
Features
Tubing Size: Metric Size
Specifications
Burst Pressure Characteristics andOperating Pressure Curve
TAU 10 65 B 100
ModelO.D. mm I.D. mm
Burst pressure Min. bending radius mm Operating temperature MaterialSurface resistance
Metric size Tubing
TAU3220 3.22
TAU0425 4
2.5
TAU0604 64
TAU0805 85
TAU1065 106.5
TAU1208 128
Black (B)
–20m roll –100m on reel
Length per roll Symbol Length20100
20m roll 100m on reel
Colour indication Symbol Colour
B Black
Tubing I.D.
Tubing O.D.
Refer to burst pressure characteristics curve.
0 to 40˚C Conductive polyurethane
104 to 107
10 10 15 20 27 35
For pneumatic piping system requiring anti static measures.
Flexible tubing
Note 1) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. Note 2) The value at a temperature of 20˚C.
Note 1)
Note 2)
0.9MPaMax. operatingpressure (20˚C)
How to Order
Antistatic Soft Polyurethane Coil Tubing Series TAS
Fitti
ngs
& T
ubin
g
1485
FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Antistatic Soft Polyurethane Tubing
Series TAS
Series
Features
Specifications
Burst Pressure Characteristics and Operating Pressure Curve
TAS 10 65 B 100
ModelO.D. mmI.D. mm
Burst pressureMin. bending radius mmOperating temperatureMaterialSurface resistance
Metric sizeTubing
TAS32223.22.2
TAS04254
2.5
TAS060464
TAS080585
TAS1065106.5
TAS1208128
Black (B)
–20m roll –100m on reel
Length per rollSymbol Length20100
20m roll100m on reel
Colour indicationSymbol Colour
B Black
Tubing I.D.
Tubing O.D.
Refer to burst pressure characteristics curve.
0 to 40˚CConductive polyurethane + flame resistant nylon (equivalent to UL-94 standards V-0)
104 to 107
12 12 15 19 27 32
Note 1) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression.Note 2) The value at a temperature of 20˚C, with a 10% or less O.D. variable rate.
Note 1)
Note 2)
1.2MPaMax. operating pressure (20˚C)
How to Order
20m Roll 100m on Reel
For pneumatic piping system requiring anti static measures.
Flame resistant tubing(Equivalent to UL-94 Standards V-0)
TAS3222B-20TAS0425B-20TAS0604B-20TAS0805B-20TAS1065B-20TAS1208B-20
Colour (Colour symbol) Model
Black (B)Black (B)Black (B)Black (B)Black (B)Black (B)
3.2468
1012
2.22.545
6.58
TAS3222B-100TAS0425B-100TAS0604B-100TAS0805B-100TAS1065B-100TAS1208B-100
O.D. I.D. Colour (Colour symbol) Model
Black (B)Black (B)Black (B)Black (B)Black (B)Black (B)
3.24681012
2.22.545
6.58
O.D. I.D.
Series TH FEP Tubing (Fluoropolymer)
Fittings & Tubing
1486
FEP (Fluoropolymer) Tubing
Series TH
Series
Features
Tubing Size: Metric Size
How to Order
Heat resistance: 200˚C
4 Colour variations
General pneumatic piping applications (Food, Semiconductor, Medical care and Automotive)
Model
Tubing O.D. (mm)
Tubing I.D. (mm)
Metric size
Translucent
Red (Translucent)
Blue (Translucent)
Black (Opaque)
NR
BUB
Color Symbol
TH0402
4
2
-20m roll -100m roll
TH0425
4
2.5
TH0604
6
4
TH0806
8
6
TH1075
10
7.5
TH1008
10
8
TH1209
12
9
TH1210
12
10
5/32"
Inch nominal size
5/16"
Inch nominal size
TH0604 N 20
ColourSymbolNR
BUB
Colour indication
Indication of tubing model
Metric size
Roll size20m roll100m roll
Symbol20100
Length per roll
TranslucentRed (Translucent)Blue (Translucent)Black (Opaque)
dne dexiF
2R
At a temperature of 20°C, bend the tubing into a U shape. Fix one end and gradually move the other end closer. Measure 2R at the point where the outside diameter's rate of change is 5%.
How to measure the minimum bending radius.
aPM erusserP gnitar ep
O .xaM
Operating Temperature °C
1
0.5
0-20 0 20 40 60 80 100120140160180200
2
3
TH0402
TH0604
TH0425
TH1008/TH1210
TH0806/TH1075/TH1209
Note) The maximum operating pressure varies dependant on the I.D. bore size even if the O.D. is the same.
Fluid
Applicablefittings
Max. operating pressure
Operating temperatureMaterial
One-touch fittings: Series KQ, KJ Insert fittings: Series KFFluoropolymer fittings: Series LQMiniature fittings: Series M, MS (Hose nipple type)
Refer to below “Max. Operating Pressure.”Min. bending radius (mm) 15
Air, Inert gas: -20 to 200° °C (No freezing)
FEP (Fluorinated Ethylene Propylene Resin)
Air, Water Note 1), Inert gasNote 4)
Note 2)
Note 3)
Note 4)
20 35 60 95 100 130
Note 1) When using a fluid in liquid form, the surge pressure must not exceed the maximum operating pressure. A surge pressure higher than the maximum operating pressure can cause breakage of the fittings, or rupture of the tubing.Furthermore, an abnormal temperature increase due to adiabatic compression can also result in ruptured tubing.
Note 2) Do not use in locations where the FEP tubing will move.Be sure to operate under the maximum operating pressure conditions using the lower maximum operating specification of either the tubing or fittings.After long term use or under high temperatures, some fittings leakage may occur due to material deterioration with age. Perform periodic inspections, and if any leakage is detected, replace with a new product immediately.For High Purity Fluoropolymer, refer to the precautions of CAT.ES70-17, "High Purity Fluoropolymer Fittings & Tubing."
Note 3) Minimum bending radius is measured as shown left as representative values.Allow extra length when piping since the tubing may crush if bent more than the min. bending radius.
Note 4) Consult SMC if using any other fluids.
Max. Operating PressureSpecifications
Soft Fluoropolymer Tubing Series TD
Fitti
ngs
& T
ubin
g
1487
FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Soft Fluoropolymer Tubing
Series TDFeatures
Tubing Size: Metric Size
Conforms to Food Sanitation Law.
Material: Denatured PTFEOperating temperature max. 260°C.
Flexibility: Approx. 20% improved.
How to Order
Maximum Operating Pressure
Note 1) When using a liquid fluid, the surge pressure must be under the maximum operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to fittings and tubes. Furthermore, abnormal temperature rise caused by adiabatic compression may result in the tube bursting.
Note 2) Do not use this product in a manner in which the tube is not fixed.Observe the lesser value of the maximum operating pressure between the tube and fitting.A material change over a long duration or due to high-temperature may cause leakage. Perform periodic
maintenance and replace with a new product immediately when abnormalities are detected.Refer to the “Maintenance” precautions in the TD/TID tubing.For other precautions, see the “Fittings & Tubing” precautions in the “Best Pneumatics catalogue". When using the fluoropolymer fittings, please refer to the precautions in the relevant catalogue CAT. ES70-17.Note 3) The minimum bending radius is the representative value measured as shown below.
• Use a tube above the recommended minimum bending radius.• The tube may be bent if used under the recommended minimum bending radius. Therefore, refer to the refraction value and make sure that the tube is not bent or flattened.
• Please note that the refraction value is not warranted because of the value when 2R is measured by the method shown above on the left if the tube is bent or flattened, etc.
Model/Specifications
Metric size
Insert fitting KF seriesStainless steel 316 insert fitting KFG series
Miniature fittings M, MS series (Hose nipple type)Fluoropolymer fitting LQ2 series
ModelSize
TD0425Tubing O.D. (mm)Tubing I.D. (mm)
Roll
ColorFluid Note 1)
Max. operating temperature (fixed usage)Material
Max. operating pressure (MPa)
Min. bending radius (mm) Note 3)
Applicable fittings Note 2)
10 m20 m
20°C100°C200°C260°C
Recommended radiusRefraction value
42.5
1.6 0.9 0.450.2315 8
1.4 0.7 0.350.2 2516
0.9 0.5 0.250.154531
0.9 0.5 0.250.155535
0.9 0.5 0.250.157541
TD060464
TD080686
Translucent (material colour)Air, Water, Inert gas
260°CDenatured PTFE (Polytetrafluoroethylene resin)
TD1075107.5
TD1209129
TD0425
Tubing model
10Length per roll
Symbol1020
Length10 m roll20 m roll
Metric size
Bend the tube into the U-form at a temperature of 20°C. Fix one end and close loop gradually. Measure 2R when the deformed ratio of the tube diameter at bending reaches 5%.
How to measure theminimum bending radius
Fixe
d en
d
2R
–20 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Operating temperature (°C)
Max
. ope
ratin
g pr
essu
re (M
Pa)
TD0425
TD0604
TD0806/TD1075/TD1209
Series TL High Purity Fluoropolymer Tubing
Fittings & Tubing
1488
High Purity Fluoropolymer Tubing
Series TL
Series/Specifications
Features
How to Order
Outstanding corrosion resistance.
Compatable with max fluid temperature up to 200˚C.
High purity and low particulate generation.
+0.2–0.1
10.1
0.1
Metric sizes (Series TL)
20 40
Tubing modelNominal diameter
Tubing size
O.D.(mm)
Thickness(mm)
Bundle
Straight pipe
ColourApplicable fluidMax. operating pressure (at 20˚C)Burst pressure(at 20˚C) Min. bending radius (mm)Max. operating temperature (Fixed use)
Material
Basicdiameter
Basicdiameter
Tolerance
10 m20 m50 m100 m50 Ft. (16 m)100 Ft. (33 m)2 m
Tolerance
TL0403–
ø4 x ø3
4
0.50.05–––
4.9 MPa
TL0604–
ø6 x ø4
6
–––
6.9 MPa
TL0806–
ø8 x ø6
8
–––
4.7 MPa
65
TL1008–
ø10 x ø8
10
––
3.6MPa
110
TL1210–
ø12 x ø10
12
––
2.9 MPa
1 MPa 0.9MPa 0.7 MPa
160
TL1916–
ø19 x ø16
19
1.50.15––
2.6 MPa
0.6 MPa
Translucent (colour of material)Please refer to the applicable fluid chart.
260˚C
Super PFA
Tubing Model
Eluting fluorine ion amount (ng/g)
Type
Eluting amount
Fluorine ion
0.1 or less
Eluting metal ion amount (ng/cm2)
Type
Eluting amount
Al
4.5
Fe
0.3
Ni
0.2
Na
7.1
Ca
1.3
Length
Symbol102050100
Type
Roll
Length10 m20 m50 m
100 m
Applicable to both metric and inch size
Straight 2 m2S
20TL0604Metric sizes
2R
Note 4) Note 4)
Note 1)
Note 2)
Note 1) • The maximum operating pressure is the value at 20˚C. For other temperatures, calculate from the burst pressure drop coefficient.
Furthermore, an abnormal temperature increase due to adiabatic compression can cause tubing to burst.To operate at a temperature other than 20˚C, the operating pressure must be no more than the value calculated using the equation below: When the value (calculated using the formula below) exceeds 1 MPa, the Max. operating pressure is 1 MPa.(Max. operating pressure) = 1/4 x (burst pressure drop coefficient) x (burst pressure at 20˚C)
• When using a fluid in liquid form, the surge pressure must be no more than the maximum operating pressure.
A surge pressure higher than the maximum operating pressure can cause breakage of the fitting or bursting of the tubing.
Note 2) The minimum bending radius is measured using the method shown in the figure at the right.Note 3) It is connectable with LQ Series (3/4"size). As for other commercial items, there are some cases it is not able to connect due to tolerance of dimensions.
Fixe
d sid
e
At a temperature of 20˚C bend the tubing into a U shape. Then with one side fixed, gradually close the other side and measure 2R at the point where the tubing folds or flattens, etc.
A 15 g piece of fluororesin tubing is cut off, washed in deionized water and immersed in 15 ml of 25% methyl alcohol extract at room temperature for 24 hours. Then the extract is diluted with deionized water to be subjected to a quantitative analysis of fluorine ions.
The interior of the fluororesin tubing is washed with super deionized water. Approximately 20g of super high purity hydrofluoric acid (48%) is measured and injected into the tubing. The interior wall of the tubing is immersed at normal temperature for one week with both ends of the tubing plugged. Then the extract was diluted with super deionized water to be subjected to a quantitative analysis on Al, Fe, Ni, Na and Ca by the stripping method.
+- +- +-
High Purity Fluoropolymer Tubing Series TL
Fitti
ngs
& T
ubin
g
1489FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
The material and fluid compatibility check list provides reference values as a guide only.Note 1) Since static electricity may be generated, implement suitable countermeasures.
• Compatibility is indicated for fluid temperatures of 200˚C or less.• The material and fluid compatibility check list provides reference values as a guide only, therefore we do not guarantee the application to our product.• The data above is based on the information presented by the material manufacturers.• SMC is not responsible for its accuracy and any damage happened because of this data.
Table symbol can be used.
Acetic acid
Acetone
Ammonium fluoride
Ammonium hydroxide
Butyl acetate
Methylne chloride
Hydrochloric acid
Hydrofluoric acid
Hydrogen peroxide
Methanol
Methyl ethyl Ketone
Nitric acid
Phosphoric acid
Caustic potash
Sulfuric acid
Toluene
Xylene
Sodium hydroxide
1.1.1-Trichloroethane
Rhosphorus pentachloride
Isobutyl alcohol
Isopropyl alcohol
Ozone
Ethyl acetate
Deionized water
Nitrogen
Ultrapure water
Tmah
100%
100%
40%
30%
100%
100%
38%
50%
60%
100%
—
70%
86%
85%
100%
—
—
100%
100%
—
—
—
—
—
—
—
—
—
Chemical Compatibility
Note 1)
Note 1)
Note 1)
Note 1)
Note 1)
Material and fluid compatibility check list for high purity fluoropolymer fittings
Burst pressure drop curve1.0
0.8
0.6
0.4
0.2
020 40 60 80 100 120 140 160 180 200 220 240 260
Temperature ˚C
Burs
t pre
ssur
e dr
op c
oeffi
cien
t
Series TPH Clean Tubing: Polyolefin Tubing
Fittings & Tubing
1490
Clean Tubing: Polyolefin Tubing
Series TPH
Series
Features
Tubing Size: Metric Size
Suitable for clean room blowing systems.
6 colour options.
Clean tubing.
TPH 06 04 B 20Length per roll
Symbol Length20
10020m roll100m roll
Colour indicationSymbol Colour
BWR
BUYG
BlackWhiteRedBlue
YellowGreen
Tubing I.D.
Tubing O.D.
How to Order
Burst Pressure Characteristics and Operating Pressure Curve
SpecificationsFluidMax. operating pressure (20˚C)Min. bending radius mmBurst pressureOperating temperatureMaterial
Air, Nitrogen gas, Water (Pure water) Note 1)
35Refer to burst pressure characteristics curve.
–20 to 80˚C, Water: 5 to 80˚CPolyolefine resin
ModelO.D. mmI.D. mm
Metric sizeTubing
TPH04254
2.5
TPH060464
TPH080686
TPH1075107.5
TPH1209129
White (W)Black (B)Red (R)Blue (BU)Yellow (Y)Green (G)
–20m roll –100m roll
15 25 45 551.0MPa 0.7MPa
Note 1) Contact SMC regarding other fluids.Note 2) The maximum operating pressure is the value at 20˚C. Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Abnormal temperature rises due to adiabatic compression can cause tubing to burst.Note 3) The minimum bending radius is measured at 20˚C based on the method shown in the figure at the left. At higher temperatures, breakage or flattening may occur even with a value larger than the minimum bending radius.
Note 2)
Operating temperature ˚C
Max. operating pressure (TPH0425,TPH0604)
TPH0806,TPH1075,TPH1209
Burst pressure
TPH0425,TPH0604
Burst pressure
Max. operating pressure(TPH0806,TPH1075,TPH1209)
Burs
t pre
ssur
e M
Pa
–20 00
1
2
3
4
5
20 40 60 80
Series TP has less resistance to lithium grease and is not suitable for piping of pneumatic equipment using lithium grease.
Caution
Clean Tubing: Soft Polyolefin Tubing Series TPS
Fitti
ngs
& T
ubin
g
1491FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Clean Tubing: Soft Polyolefin Tubing
Series TPS
Series
Features
Tubing Size: Metric Size
Suitable for clean room blowing systems.
6 colour options.
Clean tubing.
Pliable for tight bend radii
TPS 06 04 B 20Length per roll
Symbol Length20100
20m roll100m roll
Colour indicationSymbol Colour
BWR
BUYG
BlackWhiteRedBlue
YellowGreen
Tubing I.D.
Tubing O.D.
How to Order
Burst Pressure Characteristics and Operating Pressure Curve
SpecificationsFluidMax. operating pressure (20˚C)Min. bending radius mmBurst pressureOperating temperatureMaterial
Air, Nitrogen gas, Water (Pure water) Note 1)
25Refer to burst pressure characteristics curve.
–20 to 80˚C, Water: 5 to 80˚CPolyolefine resin
ModelO.D. mmI.D. mm
Metric sizeTubing
TPS04254
2.5
TPS060464
TPS080585
TPS1065106.5
TPS1208128
White (W)Black (B)Red (R)Blue (BU)Yellow (Y)Green (G)
–20m roll –100m roll
10 20 30 400.7MPa
Note 1) Contact SMC regarding other fluids.Note 2) The maximum operating pressure is the value at 20˚C. Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Abnormal temperature rises due to adiabatic compression can cause tubing to burst.Note 3) The minimum bending radius is measured at 20˚C based on the method shown in the figure at the left. At higher temperatures, breakage or flattening may occur even with a value larger than the minimum bending radius.
Note 2)
Series TP has less resistance to lithium grease and is not suitable for piping of pneumatic equipment using lithium grease.
Caution
Operating temperature ˚C
Max. operating pressureBurs
t pre
ssur
e M
Pa
–20 00
1
2
3
4
5
20 40 60 80
Burst pressure
Series TB/TBR/TK Tubing Related Equipment
Fittings & Tubing
1492
Tubing Stand & Reels
Series TB/TBRFeatures
Compact size with a small footprint.
Installation can be easily completed by putting the tubing reels on the stand.
Easy replacement of tubing
One-touch snap fit operation
Locked Unlock condition
Tubing Cutter
Tubing Reels Tubing Stand: TB-2
TK-1 TK-2
Applicable tubing size mm Model
TBR-1TBR-2TBR-3TBR-4
4, 68
1012
Note) Do not use the cutter to cut metal such as wires.
Applicable tubing O.D.: 13mm or less
Applicable tubing O.D.: 18mm or less
TK-3 (Simple type)Applicable tubing O.D.: 12mm or less
Tubing reel
Tubing stand
40060
0750
Movement is easy with attached casters. A reel support is
provided, which can be moved according to the number of reels.
Series TK
Tubing Related Equipment Series TM/TG/TKS
Fitti
ngs
& T
ubin
g
1493FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Multiple Tubing Holder
Series TMFeatures
Double Layer Tubing Stripper
The outer layer of double layer tubing is peeled off easily.
ModelApplicable tubing sizeApplicable tubing materialHandle colourWeight
TG-1ø4, ø6
Nylon, Soft nylon, PolyurethaneBlue33g
ModelTKS-06TKS-08TKS-10TKS-12
Tip colourOrangeYellowBlue
Green
Applicable tubing*
TRB0604, TRBU0604TRB0806, TRBU0805TRB1075, TRBU1065TRB1209, TRBU1208
Can be separated at any position depending on the number of tubing. Adopts flame resistant resin (Equivalent to UL-94 Standards V-0).
To remove tubing in a confined space or from manifolded one-touch fittings.
* Inner tubing material/TRB: soft nylon, TRBU: polyurethane
TM-04TM-06TM-08TM-10TM-12
468
1012
Model6
12
8
Number of tubing (MAX.) Accessory: Phillips countersunk tapping screwSize: nominal size X length Number of pieces
4
2 X 6
2.6 X 8
3 X 8
Applicable tubing O.D.
Align the cutter with the cutting groove and cut the holder.
Cautionq The multiple tubing holder can be cut apart according to
the number of tubing to be connected.
<Cutting method>
w Cut the multiple tubing holder at a desired position and mount it on the equipment with the attached phillips countersunk tapping screws.
e Align the tube with the holding position and push down to fit it into the holding part.
r Pull up a tubing to remove it from the holder.
How to Use
Model
Tubing Release Tool
Series TG
Double Layer Tubing Stripper
Series TKS
Variations
Series MQR Rotary Joint
Fittings & Tubing
1494
Low Torque Metal Seal Type Rotary Joint
Series MQR
Specifications
How to Order
FeaturesStart-up torque unaffected by supply pressure and temperature fluctuations.Use of metal seals prevents the spool from sticking to the rotating surface even after a long period of non-operation.Operating pressure - 100kPa - 1MPa.Piping ports are aligned in a spiral line for easy piping.
Ball bearing
Spool(Metal seal)
Sleeve(Metal seal)
Body
Adapter plate
Construction
1 circuit, 2 circuits, 4 circuits, 8 circuits, 12 circuits, 16 circuits1 circuit, 2 circuits, 4 circuits, 8 circuits, 12 circuits
16 circuits
Connection diameter
Number of circuits
Low torquerotary joint(Metal seal type)
Options
Note: No flange type in 1 circuit system
Nil StandardF Note) Flange
1 circuit2 circuits4 circuits8 circuits12 circuits
Number of circuits Flange part number2 circuits MQR2-F4 circuits MQR4-F8 circuits MQR8-F12 circuits MQR12-F16 circuits MQR16-F
Model MQR1-M5 MQR2-M5 MQR4-M5 MQR8-M5 MQR12-M5Number of circuits (Number of ports) 1 2 4 8 12Fluid Air / Inert gasSeal structure Metal sealGuide structure Bearing supported Bearing supported at both ends
Port size Male R1/8Female M5
M5
Flow ratecharacteristics
C[dm3/(s.bar)] b Cv0.50 0.40 0.17
Lubrication Not requiredMin. operating pressure –100kPaMax. operating pressure 1.0MPa
–10 to 80°C
Max. start-up rotation torque Note 2) 0.003 N·m or less 0.03 N·m or less 0.05 N·m or less 0.10 N·m or less 0.20 N·m or lessAllowable rotation number 3000 min-1 (r.p.m.) or less Note 3) 2000 min-1 (r.p.m.) or less 1500 min-1 (r.p.m.) or less 900 min-1 (r.p.m.) or less 600 min-1 (r.p.m.) or less
1N or less 15N or less 30N or less 40N or less 50N or less
WeightAllowable axial load
0.025kg 0.16kg 0.39kg 0.76kg 1.26kg
MQR16-M516
0.50 N·m or less200 min-1 (r.p.m.) or less
50N or less
2.80kg
Ambient temperature and operating fluidtemperature Note 1)
Allowable radial load(allowable coupling axisreaction) Note 4)
M5
MQR F 4 M5M5
12481216
Note 1) The temperature 80 °C includes temperature rise during rotation.Note 2) The rotational torque does not change with the supply pressure or with non-use (remains within allowable torque), but it does change with the rotational
speed.Note 3) If using at a speed above 600 min-1 (r.p.m.), ensure rotation is in the direction in which the joint is fastened.Note 4) Rubber / resin couplings are recommended due to their excellent absorption of off center, shocks, and vibrations.
Options/Mounting Bracket
Rotary Joint Series MQR
Fitti
ngs
& T
ubin
g
1495
FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
MQR1-M5
MQR4-M5
MQR2-M5
M4thread length 8
2-M3 thread length 6P.C.D.29
4-M5ø10 counter bore depth 1.5
∗ Flange: MQR2-F (for MQRF2-M5)
∗ 4-ø3.5 mounting hole
∗ 35∗ 29
ø3+0.1 0 depth 10
±3 0.0
5.4
2.862
5.65.3
1
1
2
2
)43( 052
ø15h8
ø35h8(10 from end)
ø15H8
41∗ 5
1 2
(6)
32 2-M3 thread length 8P.C.D.29
∗ Flange: MQR4-F(for MQRF4 - M5)
ø3+0.1 0 depth 10
M5 thread length 10
±0.03
ø20h8ø44h8
(10 from end)
2-M4 thread length 8P.C.D.38
5.5 2-M3 thread length 6P.C.D.38
∗ 4-ø3.5 mounting hole
∗5 4
∗73
207
∗ 5)55(
31
72
1
32
4
5.65.3
6.42 = 3 x 2.82.8 = P
8-M5ø10 counter bore depth 1.5
ø20H8(ø8)
1
2
341
4
4º5
∗ Symbol indicates flange dimensionsDimensions: Standard Type/Flange Type
ssorca htdiW
41 :stalf
ssorca htdiW
7 :stalf
(16.2)M5
ø14
ø7.6
512 43
)8(
R1/8M5
MQR8-M5
M6 thread length 10 4-M3thread length 6P.C.D.43
∗ Flange: MQR8-F(for MQRF8 - M5)
∗ 4-ø4.5 mounting hole
∗50
∗41
ø4.1 0.05 depth 10
0.037
ø49h8 0
0.033ø25h816-M5 ø10 counter bore depth 1.5
378 501
51∗
5
(10 from end)
12
43
56
87
5.75.4
922.8
74.75
P2 .8
ø25H810
12
3
45
6
7
8
462-M4thread length 8P.C.D.43
P54 º
22.5
Series MQR Rotary Joint
Fittings & Tubing
1496
∗ Symbol indicates flange dimensionsDimensions: Standard Type/Flange Type
4-M3thread length 6P.C.D.48
∗ Flange: MQR12-F(for MQRF12-M5)
+0.05ø4.1
±0.038
∗ 4-ø8 counter bore 5.5ø4.5 mounting hole
M6thread length 10
∗55
∗5 4
depth10
24 x M5ø10 counter bore depth1.5
0- 0.033
ø54h8
ø30h8(10 from end)
3021 041
71∗ 7
(10)ø30H8
5.5
139
2.09 = 11 x 2.82.8 = P
12
345
67
89
1011
12
º54 º54
4-M3thread length 8 P.C.D.4851
P=30º
1 23
4
5
6789
10
11
12
MQR12-M5
ø5.1±0.05±0.03depth 8
MQR16-M5
P=225. °
(ø19)5.01 ø40H8
34° 34°
7361
61
10
∗65
∗55
65 ° 65 °
5 .781∗7
5.71
321=51 x 2.8 2.8=P5.73
5.5
ø64h8
ø45h8
16-M5ø10 counter bore 1.5
∗ Flange: MQR16-F(for MQRF16-M5)
1312
54
1615
14
1312
1110 9 8
7654
321
4-ø8 counter bore 5.5ø4.5 mounting hole
M8 thread length 10
8-M3thread length 6P.C.D.54
(10 from end)
1615
14
1110
98
7 6
32
1
16-M5 ø13.5 counter bore 1
4-M3thread length 6P.C.D.58
Blow Gun Series VMG
Fitti
ngs
& T
ubin
g
1497FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Blow Gun
Series VMG
Specifications
FeaturesSpecial valve design and construction saves energy.
Choice of bottom or top piping.
Selection of nozzles can be added (see KN section).
Threaded or one-touch connection.
Typical pressure loss is less than 1%.
Effective sectional area 30mm². (Without Nozzle)
Provides constant trigger force irrespective of the supply pressure.
How to Order
Blow gun Nozzle
Nil010203041112132122232431323334
Type Nozzle modelWithout nozzleKN-R02-100KN-R02-150KN-R02-200KN-R02-250
KNH-R02-100KNH-R02-150KNH-R02-200
KNS-R02-075-4KNS-R02-090-8KNS-R02-100-4KNS-R02-110-8KNL3-06-150KNL3-06-200KNL6-06-150KNL6-06-200
ø1ø1.5ø2
ø2.5ø1
ø1.5ø2
ø0.75 x 4ø0.9 x 8ø1 x 4
ø1.1 x 8ø1.5ø2
ø1.5ø2
Nozzle size
VMG 1
Series
Piping entry
Body colour
01W
1 Resin body lever type
1 BottomTop2
Standard type
W Urban whiteDark blueBU
Connection size
F02F0311
Piping connection system
Screw-in type
With S coupler plug
Port size
Plug part no.
Size and part no.1/43/8
KK4P-02MS
Note 1)
Male thread nozzle
High efficiency nozzle
Low noise nozzlewith male thread
Copperextensionnozzle
Length 300mmLength 600mm
Fluid
Operating pressure range
Proof pressure
Ambient and fluid temperature
Effective area
Port size
Piping entry
Nozzle port size
Weight
Operational force (when the valve is fully open)
Air
0 to 1.0MPa
1.5MPa
5 to 60 C (With no freezing)
30mm2 (without nozzle)
1/4, 3/8
Rc1/4
180g
7N
TopBottom
Note 1) One piece of H06-02 self-align fitting is attached.
Bottom Piping Top Piping
When a copper extension nozzle is ordered separately, a self-align fitting will also be required for connection. Order one with the above part number in addition to the nozzle.
F03
Series VMG Blow Gun
Fittings & Tubing
1498
Dimensions
Provides constant operational force irrespective of the supply pressure Pressure loss
0 1.0
Conventional product
Ope
ratio
nal f
orce
Supply pressure (MPa)
Larg
eSm
all
Blow Gun VMG
0
0.01
0.02
0.03
0.04
0.05
0 0.2 0.4 0.6 0.8 1 1.2Supply pressure (MPa)
Pres
sure
loss
(MPa
)
∗Male thread nozzle ø2.5
0.005MPa pressure loss at 0.5 MPa
23
23
A
172.
5
34.2
30
147
117.5102
A
30
156
117.5102
S coupler plug mounting
1/4, 3/8
Width across flats 22
1/4, 3/8
Width across flats22
VMG12/Piping entry: Top
VMG11/Piping entry: Bottom
S coupler plug mounting
1/4
1/4
Type Nozzle modelKNS-R02-075-4KNS-R02-090-8KNS-R02-100-4KNS-R02-110-8KNL3-06-150KNL3-06-200KNL6-06-150KNL6-06-200
Low noise nozzle with male thread
Copper extension nozzle(with self align fitting H06-02)
Nozzle sizeø0.75 x 4ø0.9 x 8ø1 x 4
ø1.1 x 8ø1.5ø2
ø1.5ø2
A12121212
305.3305.3605.3605.3
Type Nozzle modelKN-R02-100KN-R02-150KN-R02-200KN-R02-250
KNH-R02-100KNH-R02-150KNH-R02-200
Male thread nozzle
High efficiency nozzle
Nozzle sizeø1
ø1.5ø2
ø2.5ø1
ø1.5ø2
A23.423
22.522.1444444
34.2
Note 1) Note 1)
Note 1) Reference dimensions after installation
mm mm
Nozzle
Nozzle
Not
e 1)
Not
e 1)
Nozzles for Blowing Series KN
Fitti
ngs
& T
ubin
g
1499
FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Specifications Nozzle (KN, KNK, KNH, KNS, KNL)
Nozzles for Blowing
Series KNNozzle system for air blowing and back pressure sensing.
Complete range of delivery nozzles with different fittings.
Lower air consumption for dramatic cost savings in use.
Deliver a controlled amount of air where needed.
Consistent performance for assured results.
Easier to set up than improvised nozzles and jets.
Features
Sensing head (KNP)Applicable tubing materialApplicable piping O.D. mmFluidMax. operating pressureAmbient and fluid temperature
Seal for R threads
Threads MountingNut
Nylon, Soft nylon, Flexible copper pipe (C1220T), OST pipeø4, ø6, ø8, ø10, ø12, ø16, ø20
Air, Coolant1.0MPa (0.3MPa with SGP pipe)
-5 to 60˚C (with no freezing)JISB0203 (taper threads for piping)
JISB0211, class 2 (taper threads for piping)None
Applicable fitting sizeFluidMax. operating pressure (at 20˚C)Ambient and fluid temperature
ø4Air
0.8MPa-5 to 60˚C (with no freezing)
(mm)
KN-04-100KN-04-150KN-06-100KN-06-150KN-06-200KN-08-150KN-08-200KN-10-250KN-10-300KN-10-350KN-10-400KN-10-600KN-12-350KN-12-400KN-12-600KN-16-400KN-16-600KN-20-400KN-20-600
ø1ø1.5ø1ø1.5ø2ø1.5ø2ø2.5ø3ø3.5ø4ø6ø3.5ø4ø6ø4ø6ø4ø6
ø4ø4ø6ø6ø6ø8ø8ø10ø10ø10ø10ø10ø12ø12ø12ø16ø16ø20ø20
10101212121414141414141417171722222626
10101212121414171717171719191924242727
27 27.730.130.831.533.834.635.636.337.129.527.740.441.331.240.138.445.643.9
15151616161616171717171717171717171717
L 1 L 2H1 H2
L2
L1
øDH2H1
Nozzle with self-align fitting/KN
Model D
KN-R01-100KN-R01-150KN-R02-100KN-R02-150KN-R02-200KN-R02-250KN-R02-600KN-R03-400KN-R03-600KN-R04-400KN-R04-600KN-R06-600KN-R06-800KN-R10-800
ø1ø1.5ø1ø1.5ø2ø2.5ø6ø4ø6ø4ø6ø6ø8ø8
R1/8R1/8R1/4R1/4R1/4R1/4R1/4R3/8R3/8R1/2R1/2R3/4R3/4R1
1010141414141417172222272736
21.42131.43130.530.127.131.830.141.840.149.647.862.8
17.41725.42524.524.121.125.423.733.631.840.13852.4
(mm)
Model Nozzle sizeD
Connectionsize L 1 A
Width across flatsH1
A
L1
øD
H1
Connection thread
Nozzle with male thread/KN
Nozzle size Connectionsize
Width across flats
Series KN Nozzles for Blowing
Fittings & Tubing
1500
KNL3-06-150KNL3-06-200KNL3-08-200KNL3-08-250KNL3-10-250KNL3-10-300KNL6-06-150KNL6-06-200KNL6-08-200KNL6-08-250KNL6-10-250KNL6-10-300
ø1.5ø2ø2ø2.5ø2.5ø3ø1.5ø2ø2ø2.5ø2.5ø3
ø6ø6ø8ø8ø10ø10ø6ø6ø8ø8ø10ø10
300300300300300300600600600600600600
Copper extension nozzle/KNL(mm)
Model D Outside diameter L 1
øD L1
O.D
.
Low noise nozzle with male thread: KNS
Model Nozzle sizeD L 1 AWidth across flats
H1KNS-R02-075-4KNS-R02-090-8KNS-R02-100-4KNS-R02-110-8
ø0.75 x 4ø0.9 x 8ø1 x 4ø1.1 x 8
R 1/4R 1/4R 1/4R 1/4
14141414
20202020
14141414
(mm)
Model DConnection
thread L 1 AWidth across flatsH1
KNH-R02-100KNH-R02-150KNH-R02-200
ø1ø1.5ø2
R 1/4R 1/4R 1/4
141414
525252
464646
(mm)
AL1
øDH1
Connection thread
Self-align fitting (For copper extension nozzle connection).
Half unioneg: H06-02
The air blow thrust isimproved by 10%.
High efficiency nozzle:KNH
øD
2
A
L1
ConnectionthreadH1
KN-Q06-100KN-Q06-150KN-Q06-200KN-Q08-150KN-Q08-200KN-Q10-200KN-Q10-250KN-Q12-250KN-Q12-300
ø1ø1.5ø2ø1.5ø2ø2ø2.5ø2.5ø3
ø6ø6ø6ø8ø8ø10ø10ø12ø12
3535353939434345.545.5
18181820.520.522222424
Nozzle for One-touch fitting/KN (mm)
Model D L 1 A
øD
L1
A
10
Note) Applicable only for use with SMC KQ fittings.
(mm)
Model DConnection
size L 1 L 2Width across flatsH1 H2
KNK-10-400KNK-10-600KNK-12-400KNK-12-600KNK-16-400KNK-16-600KNK-20-400KNK-20-600
ø4ø6ø4ø6ø4ø6ø4ø6
ø10ø10ø12ø12ø16ø16ø20ø20
1717171717171717
1717191924242727
41.741.741.241.241.841.843.843.8
1717171717171717
35°
L1L2
øD
8.5H2
Pivoting nozzle with self-align fitting/KNK
Nozzle size
Nozzle size
Connectionsize
Connectionsize
Nozzle size
Nozzle size
Nozzles for Blowing Series KN
Fitti
ngs
& T
ubin
g
1501
FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION
Model Nozzle sizeD
Connectionsize L 1 A
Width across flatsH1 H2
Model Nozzle sizeD
Connectionsize L 1 L 2
Width across flatsH1 H2
KNK-R02-400KNK-R02-600KNK-R03-400KNK-R03-600KNK-R04-400KNK-R04-600
ø4ø6ø4ø6ø4ø6
R1/4R1/4R3/8R3/8R1/2R1/2
171717171717
171717172222
3838393942.242.2
31.931.932.432.434.134.1
KNS-08-075-4KNS-08-100-4KNS-10-075-4KNS-10-090-8KNS-10-100-4
ø0.75 x 4ø1 x 4ø0.75 x 4ø0.9 x 8ø1 x 4
ø8ø8ø10ø10ø10
1212141414
1414171717
24.324.3242424
1616171717
(mm)
(mm)
L2
L1
øD
2H2H1
35°
øD
L1A
8.5
Connection thread
H2H1
Pivoting nozzle with male thread/KNK
Low noise nozzle with self-align fitting/KNS
Sensing Heads
H2H1
øD
L1 L2
øDA
L1L3
L2
L 1 L 2H1 H2
KNP-1 ø2.5 ø4 5 8 63.7 1000
L 1 L 2H1
KNP-2 ø0.7 ø4 5 41
A
12.7 1000
L 3
23
(mm)
(mm)
Model
Model
D
D
Standard sensing head
Needle sensing head
Polyurethane tubing
Cas
sette
siz
e
Polyurethane tubing
Connectionsize
Connectionsize
Nozzle size
Nozzle size