Operating Instructions Coffee MachineGreen coffee beans are very hard and still contain a certain...

Operating InstructionsCoffee Machine

To prevent accidents and machine damage, you absolutely must readthese instructions before installation or use.

en – US, CA M.-Nr. 10 608 760

Packaging material / Disposal of old machine

2

Packaging materialThe packing materials protect theappliance during shipping.

The original box and polystyrene piecescan be saved to transport the appliancein the future.

The original packaging should also bekept in case the appliance ever needsto be returned to Miele for servicing.

Disposal of your old applianceElectrical and electronic appliancescontain valuable materials. They alsocontain certain substances, compoundsand components which were essentialfor the proper functioning and safe useof the equipment. Handling thesematerials improperly by disposing ofthem in your household waste can beharmful to your health and theenvironment. Therefore, please do notdispose of your old appliance withregular household waste and followlocal regulations on proper disposal.

Consult with local authorities, dealers orMiele in order to dispose of and recycleelectrical and electronic appliances.Miele assumes no responsibility fordeleting any personal data left on theappliance being disposed. Pleaseensure that your old appliance is keptaway from children until removal.Observe safety requirements forappliances that may tip over or pose anentrapment hazard.

Contents

3

Packaging material / Disposal of old machine .................................................. 2

IMPORTANT SAFETY INSTRUCTIONS ................................................................ 6

Guide to the appliance ....................................................................................... 16

Controls and display ........................................................................................... 17

Accessories ......................................................................................................... 18

Before using for the first time ............................................................................ 19Before using for the first time................................................................................ 19Turning on for the first time ................................................................................... 19Water hardness ..................................................................................................... 20

Operation.............................................................................................................. 22

Filling the water tank........................................................................................... 23

Filling the coffee bean container ....................................................................... 24

Turning the machine On and Off ........................................................................ 25

Cup heating.......................................................................................................... 26

Adjusting the coffee dispensers to the cup height .......................................... 27

Preparing beverages ........................................................................................... 28Making a coffee drink............................................................................................ 28Canceling preparation ........................................................................................... 29Double portion....................................................................................................... 29Making coffee drinks from ground coffee ............................................................. 30Drinks with milk ..................................................................................................... 31

Milk flask .......................................................................................................... 31Using milk cartons or bottles ........................................................................... 32Preparing drinks with milk ................................................................................ 32

Preparing the hot water (CM 6310) ....................................................................... 33Preparing user profile drinks ................................................................................. 33

Grinder setting ..................................................................................................... 34

Amount of coffee, brew temperature and pre-brewing ................................... 35Amount of coffee................................................................................................... 35Brewing temperature ............................................................................................. 35Pre-brewing ground coffee.................................................................................... 36

Portion size .......................................................................................................... 37

Contents

4

User profiles......................................................................................................... 40Accessing a user profile ........................................................................................ 40Creating a user profile ........................................................................................... 40Selecting a user profile.......................................................................................... 41Changing the name ............................................................................................... 41Deleting a user profile............................................................................................ 41Changing a user profile ......................................................................................... 41

Settings ................................................................................................................ 42Accessing the "Settings" menu............................................................................. 42Changing and saving settings ............................................................................... 42Setting options ...................................................................................................... 43Language............................................................................................................... 45Time of day............................................................................................................ 45Timer ..................................................................................................................... 45Eco mode .............................................................................................................. 46Lighting.................................................................................................................. 46Info (displaying information) .................................................................................. 47Locking the coffee system (System lock ) ......................................................... 47Water hardness ..................................................................................................... 48Display brightness................................................................................................. 48Volume................................................................................................................... 48Cup heating........................................................................................................... 48Factory default setting........................................................................................... 48Showroom program (Demo mode) ........................................................................ 49

Cleaning and care ............................................................................................... 50Overview................................................................................................................ 50Clean by hand or in dishwasher............................................................................ 51Drip tray and grounds container............................................................................ 53Drip tray cover ....................................................................................................... 54Water container ..................................................................................................... 54Stainless steel water intake valve filter.................................................................. 55Main dispenser with cappuccinatore .................................................................... 55Stainless steel milk flask ....................................................................................... 57Milk pipework ........................................................................................................ 57Bean container and ground coffee chute.............................................................. 58Housing ................................................................................................................. 58Care programs....................................................................................................... 59

Accessing the "Maintenance" menu ................................................................ 59Rinsing the coffee system ..................................................................................... 59Rinsing the milk pipework ..................................................................................... 60Degreasing the brew unit and cleaning inside ...................................................... 61

Contents

5

Descaling the machine ....................................................................................... 65

Frequently Asked Questions .............................................................................. 67Messages in the display........................................................................................ 67Unusual performance of the coffee system .......................................................... 70Unsatisfactory results............................................................................................ 75

Transport .............................................................................................................. 77Evaporating the coffee system.............................................................................. 77Packaging.............................................................................................................. 77

Technical Service................................................................................................. 78

Saving energy ...................................................................................................... 79

Electrical connection .......................................................................................... 80

Installation............................................................................................................ 81

Appliance dimensions......................................................................................... 82

Technical data...................................................................................................... 84

IMPORTANT SAFETY INSTRUCTIONS

6

Please read these instructions carefully to prevent accidents andappliance damage.

This appliance complies with current safety requirements.Improper use of the appliance can cause personal injury andmaterial damage. Read this safety information carefully beforeoperating the appliance.They contain important information on the safe installation,operation, and care of your coffee system. To avoid the risk ofpersonal injury or damage to the coffee system, it is important thatyou carefully read the instructions. Miele cannot be held liable fordamage caused by non-compliance with these IMPORTANTSAFETY INSTRUCTIONS.

Keep these instructions in a safe place and pass them on to anyfuture user.


7

Intended use

Use this coffee system only in standard household environmentsfor making coffee beverages such as espresso, cappuccino, lattemacchiato, etc. Any other type of use is not permitted.

The coffee system is not suitable for outdoor use.

The machine is intended only for the preparation of coffee-baseddrinks such as espresso, cappuccino, latte macchiato etc. Any otherusage is not supported.

Persons which lack physical, sensory or mental abilities orexperience with the machine should not use it without supervision orinstruction by a responsible person.


8

Safety with children

Caution! Danger of burning and scalding on the dispensingdispensers.Children's skin is far more sensitive to high temperatures than thatof adults.

Ensure children do not touch hot surfaces of the coffee system orplace parts of their body under the dispensing dispensers.

Keep the coffee system out of reach of children.

Keep children away from the appliance, the power cord andoutlet.

Children should be supervised when they are near the coffeesystem. Do not allow them to play with it or to use the controls.

Remember that coffee and espresso are not suitable drinks forchildren.

Danger of suffocation!Keep children away from any packing material.


9

Technical safety

Before installing the coffee system, check for externally visibledamage. If the coffee system is damaged, it may pose a safetyhazard and must not be used under any circumstances.

Before connecting the coffee system, check the voltage andfrequency indicated on the data plate against the voltage andfrequency of the household electrical supply.This data must correspond in order to prevent damage to the coffeesystem. If in doubt, consult a qualified electrician.

Be certain your appliance is properly installed and grounded by aqualified technician. To guarantee the electrical safety of thisappliance, continuity must exist between the appliance and aneffective grounding system. It is imperative that this basic safetyrequirement be met. If there is any doubt, have the electrical systemof the house checked by a qualified electrician.

Reliable and safe operation of the coffee system can only beguaranteed if it is connected to the electrical supply.

Do not connect the machine to the electrical supply using anextension cord or power bar.

The coffee system may not be used in mobile installations such asships.

Unplug the appliance from the power supply immediately if younotice any damage or smell.

Do not operate any appliance with a damaged cord or plug orafter the appliance malfunctions, or has been damaged in anymanner. Return appliance to the nearest authorized service facilityfor examination, repair or adjustment.

Ensure that the power cord will not be pinched or damaged byany sharp edges.


10

The power cord should not hang down. Someone could trip overit with the risk of injury and the appliance could be damaged.

Do not let cord hang over edge of table or counter, or touch hotsurfaces.

Do not place on or near a hot gas or electric burner, or in a heatedoven.

Only use the coffee system in rooms where the ambienttemperature is between +50°F (10°C) and +100°F (38°C).

Danger of overheating! Ensure that there is sufficient ventilationaround the coffee system. Do not cover it with tea towels etc. while itis in use.

If the coffee system is installed behind a cabinet door, it may onlybe used with the door open. This will prevent the formation of heatand humidity and subsequent damage to the appliance and/orhousing unit. Do not close the cabinet door while the coffee systemis in use. Ensure the coffee system has cooled down completelybefore closing the door.

Protect the coffee system from water and water spray. Do notimmerse the appliance in water.

Repairs and other work by unqualified persons to the applianceand the power cord could be dangerous. The manufacturer cannotbe held liable for unauthorized work. Repairs may only be carried outby a Miele-authorized service technician.

Repairs must only be performed by a trained technician inaccordance with national and local safety regulations. Repairs andother work by unauthorized persons could be dangerous and mayvoid the warranty.

Defective components should be replaced by Miele original partsonly. Only with original Miele parts can the manufacturer guaranteethe safety of the appliance.


11

For repairs, the coffee system must be disconnected from theelectrical power supply.The coffee system is only disconnected from the power supply if

– The power cord has been unplugged.Unplug the cord by pulling on the plug, not on the cord.

– The fuses to the household power supply are turned off.

– Any screw-in fuses in the household supply are fully unscrewed.

Never open the outer casing of the machine. Tampering withelectrical connections or components and mechanical parts is highlydangerous to the user and can cause operational faults or electricshock.

To protect against fire, electric shock and injury to persons do notimmerse cord, plugs, or coffee machine in water or other liquid.

To disconnect, turn main switch to "0", then remove plug fromwall outlet.

Disconnect the coffee system from the power supply if it is notgoing to be used for some time.

Use only genuine original Miele parts. If parts or accessories fromother manufacturers are used, the warranty may become void.The use of accessory attachements not recommended by Miele mayresult in fire, electric shock or injury to persons.


12

Proper use

Danger of burning and scalding from the dispensers.The liquids and steam dispensed are very hot.

Please note:

– Keep away from the area underneath the dispensers when hotliquids and steam are being dispensed.

– Do not touch hot components.

– Hot liquid or steam could spatter from the dispensers. Ensure thatthe main dispenser is clean and fitted correctly.

– Water in the drip tray can also be very hot. Take care whenemptying it.

CM 6310: Danger of injury to the eyes!

Never look directly at the lighting or use optical instruments (e.g.magnifying glass) to look at it.

Please note the following regarding water:

– Fill the water tank only with fresh, cold tap water. Hot or warmwater or other liquids could damage the coffee system.

– Change the water every day to prevent a build-up of bacteria.

– Do not use mineral water. Mineral water will cause lime scaledeposits to build up in your machine and damage it.

– Do not use water from a reverse osmosis unit in this machine.This would damage it.

Only fill the bean container with roasted espresso or coffee beans.Do not fill the bean container with coffee beans that have beentreated with additives or with ground coffee.

Do not pour liquids into the bean container.


13

Do not use green (unroasted) coffee beans or mixtures of coffeebeans which contain green coffee beans. Green coffee beans arevery hard and still contain a certain amount of residual moisture.These can damage the coffee system grinder as soon as grindingbegins.

Do not use coffee beans that have been treated with caramel,sugar or other substances. Sugar will damage the coffee system.

Only add ground coffee or cleaning tablets to the ground coffeechute.

Do not use any caramelized ground coffee. The sugar in thecoffee will stick to and block the brew unit of the coffee system. Thecleaning tablets for degreasing the brew unit will not remove thistype of deposit.

Only use plain milk. Most sugary additives can clog the milk lines.and damage the machine.

If using dairy milk make sure that it has been pasteurized.

Do not place any alcohol mixtures which are alight underneath themain dispenser. The flames could ignite plastic components andcause them to melt.

Do not place any open flame, e.g. a candle, on or near the coffeesystem. The coffee system could catch fire.

Do not use the coffee system to clean objects.


14

Cleaning and care

Turn the coffee system off at the main switch before cleaning.

Clean the coffee machine and the milk flask (supplied as standard,depending on model) daily, particularly before using for the first time(see "Cleaning and care").

All parts of the milk system need to be cleaned thoroughly andregularly.

Do not use a steam cleaner to clean this machine. Steam couldreach electrical components and cause a short circuit.

Descale the coffee system regularly depending on the waterhardness level in your area. Descale the machine more frequently inareas with very hard water. Miele cannot be held liable for damagearising from insufficient descaling, the use of incorrect descalingagent or the use of descaling agent that is not of the appropriateconcentration.

Degrease the brew unit regularly with Miele cleaning tablets.Depending on the natural oil content of the coffee used, the brewunit can become blocked quite quickly.

Rinsing coffee grounds down the drain can cause the sink to clog.Instead, dispose of your coffee grounds appropriately asbiodegradable waste (where facilities exist) or by composting.


15

For machines with stainless steel surfaces:

Do not use sticky notes, transparent adhesive tape, masking tapeor other types of adhesive on stainless steel surfaces. Thesedamage the surface, causing it to lose its dirt repellent protectivecoating.

The finish on stainless steel surfaces is susceptible to scratching.Even magnets can cause scratching.

Guide to the appliance

16

1

3

5 6 7

8

9

10

11

12

13

14

2

4

15

a Main switch (bottom left)

b Hot water spout

c Controls and display

d Cup heating

e Water container

f Ground coffee chute

g Coffee bean container

h Grinder setting(behind the service panel)

i Brew unit (behind the service panel)

j Main dispenser with cappuccinatore

k Park position for milk pipework(behind the service panel)

l Drip tray with lid and groundscontainer

m Milk tube opening

n Lower panel with drip tray cover

o Stainless steel milk flask

Controls and display

17

a On / Off button For turning the appliance On and Off

b Drink buttonsFor making Espresso ,Coffee , Cappuccino or Latte macchiato

c DisplayFor showing information on currentactivity or status

d Back For returning to the previous menu,canceling unwanted actions

e Arrow buttons For showing more selection optionsin the display and highlighting aselection

f OKFor confirming display messages andsaving settings

g Optical interface(for Miele Technical Service only)

h LEDFlashes when the appliance is turnedon and the display is black

i Settings For displaying the "Settings" menuand changing settings

j Parameters For displaying and changing drinksettings

k User profiles For creating and managing profiles

l Double portion For preparing two portions of a drink

m Additional programs other drinks: Ristretto, long coffee,caffè latte, hot milk, milk froth, hotwater *Maintenance programs

* CM 6310

Accessories

18

These products and other usefulaccessories can be ordered via theMiele Webstore, from Miele Service orfrom your Miele dealer.

Included accessories– Measuring scoop

For ground coffee

– Stainless steel milk flask MB-CMFor keeping milk cool longer(capacity approx. 2 cups / 0.5 l)

The stainless steel milk flask is notsupplied with the CM 6110.

– Descaling tabletsFor descaling the water pipework(starter set)

– Cleaning tabletsFor degreasing the brew unit (starter set)

– Test stripsFor determining the water hardnesslevel

– Cleaning brushFor cleaning the milk pipework

Optional accessoriesMiele also offers a range of optionalaccessories, as well as cleaning andconditioning products for your coffeesystem.

– Cleaning agent for milk pipeworkfor cleaning the milk system

– Cleaning tabletsfor degreasing the brew unit

– Descaling tabletsfor descaling the water pipework

– Stainless steel milk flask MB-CMFor keeping milk cool longer(capacity approx. 2 cups / 0.5 l)

Before using for the first time

19

Before using for the first time Remove any protective coverings and

notices from the machine.

Insert the drip tray into the lowerpanel.

Place the coffee machine on a flatsurface that is not sensitive to water(see "Installation").

Clean the appliance thoroughlybefore filling it with water and coffeebeans (see "Cleaning and care").

Plug in the coffee machine (see"Electrical connection").

Remove the water container and fill itup to the "max." mark with fresh coldwater. Replace the water container(see "Filling the water container").

Remove the bean container lid, fill itwith roasted coffee beans andreplace the lid (see "Filling the beancontainer").

Turning on for the first timeSet the main switch on the left-handside of the appliance to the "I" position.

When you turn the appliance on for thefirst time, the following message willappear in the display: "Miele - Welcome."


20

Selecting a language

Use the arrow keys to highlightthe desired language. Then tap OK.

Use the arrow keys to highlightthe desired country. Then tap OK.

The setting is now saved.

Setting the time of day

Use the arrow keys until the timeof day appears. Then tap OK.


The coffee system is now successfullyset up for use.

Fill the water reservoir with cold, freshtap water.

Water hardnessThe water hardness level indicates howmuch calcium is dissolved in the water.The higher the calcium content, theharder the water, and the harder thewater, the more often the coffee systemwill need to be descaled.

The coffee system measures theamount of water used and steam made.Depending on the level of waterhardness set, more or fewer drinks canbe dispensed before the applianceneeds to be descaled.

Program the coffee system to the waterhardness level of your area so that itfunctions correctly and does not getdamaged. At the correct time a promptwill then appear in the display todescale the appliance.

You can program four hardness levelson the appliance:

Water hardness Waterhardnesslevel inyour area

Setting (waterhardnesslevel)

0 - 8.7 gr/gal(0 - 8.4 °dH)

Soft Soft 1

8.7 - 14.6 gr/gal(8.4 - 14 °dH)

Medium Medium 2

14.6 - 21.9 gr/gal(14 - 21 °dH)

Hard Hard 3

> 21.9 gr/gal( 21 °dH)

Hard Very hard 4

The appliance is programmed ex-worksto hardness level 3.


21

Determining the water hardness

You can measure the water hardnessyourself using the enclosed test strip.Alternatively, your local water authoritywill be able to tell you the hardness ofwater in your area.

Dip the test strip in your drinkingwater for approximately one second,then shake off any excess water. Theresult will be evident after abouta minute.

Setting the water hardness level

Tap Settings.

Use the arrow keys to selectWater hardness and tap OK.

Use the arrow keys to select therequired water hardness. Then tapOK.


Operation

22

To operate the coffee machine, tap thesensor buttons with your finger.

When the following appears in thedisplay you are in the drinks menu:

Miele

Select drink

To make a coffee drink, tap one of thedrink buttons.

You can find more drinks in theAdditional programs menu.

Selecting a menu andnavigating within a menuTo select a menu, tap the relevantbutton. You will then be able to start anaction or change settings in the menu.

Settings

TimeTimer

Language

A scroll bar at the right of the displayshows that additional options or textare available. Use the arrow keys todisplay them.

The setting which is currently selectedwill have a checkmark beside it.

To select a setting use the arrow keys until the setting you want ishighlighted.

To confirm the selection, tap OK.

Leaving the menu or cancelingan actionTo exit the current menu, tap Back.

Filling the water tank

23

Change the water every day toprevent a build-up of bacteria.

Only use cold, fresh tap water to fillthe water tank.Hot or warm water or other liquidscan damage the coffee system.

Do not use mineral water. Mineralwater will cause serious limescaledeposits to build up in your machineand damage it.

Press the lid on the right-hand side.

Pull the water reservoir up by the lidto remove it.

Fill the water reservoir with fresh, coldtap water up to the "max." marker.

Replace the water reservoir.

If the water reservoir is a little high orat a slant, check whether the surfacethat the water reservoir sits on isdirty. If the water reservoir is notsitting correctly, the drain valve willnot be sealed.Clean the surface if necessary.

Filling the coffee bean container

24

Fill the coffee bean container withroasted coffee or espresso beans if youwant to use freshly ground coffee beansfor each cup of espresso or coffee.

Alternatively, you can make coffee orespresso with ground coffee (see"Making coffee drinks from groundcoffee").

Important! Risk of damage to thegrinder.Only put roasted coffee or espressobeans in the container. Anythingelse, including ground coffee, willdamage the grinder.Do not pour liquids in the beancontainer.

Important! Sugar damages the coffeesystem.Do not use coffee beans that havebeen treated with sugar, caramel, orother substances containing sugar inthe coffee bean container.Do not use green (unroasted) coffeebeans or mixtures of coffee beanswhich contain green coffee beans.Green coffee beans are very hardand still contain a certain amount ofresidual moisture. These candamage the coffee system grinder assoon as grinding begins.

Tip: You can use a nut or seed grinderto grind green coffee beans. Thesetypes of grinder generally have arotating stainless steel blade. You canthen add the ground green coffeeportion by portion to the ground coffeechute and make the desired coffeedrink (see "Making coffee drinks fromground coffee").

Take the lid off the coffee beancontainer.

Fill the container with roasted coffeebeans.

Replace the lid.

Tip: Tip: Only add enough beans to lastfor a few daysas contact with air causes coffee beansto lose their aroma.

Turning the machine On and Off

25

Turning onSet the main switch on the left-handside of the appliance to the "I" position.

Tap the On / Off button .

The appliance will begin rinsing afterthe heating-up phase. Hot water willcome out of the main dispenser.

When Select drink appears in the display,you can make drinks.

If the coffee system still has anoperating temperature higher than140°F (60°C), rinsing will not takeplace.

If you do not touch any buttons or run amaintenance program, the display willswitch itself off after approx. 7 minutesto save energy.The right hand LED will flash on and offas long as the appliance is switched on.

Tap any one of the buttons to wakethe appliance up again to make adrink.

Deactivation Tap the On / Off button .

After a coffee drink has beendispensed, the pipework will be rinsedbefore the appliance turns off.

If you have made a drink using milk,Place milk pipe in drip tray will appear inthe display.

Insert the end of the milk pipe into theaperture in the drip tray, and then tapOK.

If the milk system is not rinsed outbefore turning off, it will have to berinsed the next time the appliance isturned on.

Turning off for longer periodsof timeIf the coffee machine is not going to beused for a longer period of time, e.g. ifyou are going on vacation:

Empty the drip tray, the waste unitand the water reservoir.

Clean all parts thoroughly, includingthe brew unit.

Turn the appliance off using the mainswitch.

The time of day will not be saved. Itwill have to be reset next time theappliance is turned on.

Cup heating

26

(CM 6310)

Cups should always be pre-heated toallow the flavor of the coffee to developand be retained.The smaller the volume of the coffee/espresso and the thicker the cup, themore important it is to pre-heat the cup.

You can pre-heat cups or glasses onthe cup heating surface on the top ofthe coffee machine.

The cup heating function must first beswitched on.

The cup heating surface will be heatedcontinually until the coffee system isturned off.

To turn cup heating on or off

Tap .

Select Cup heating and tap OK.

Select the required option and tapOK.


Pre-heating cups

Arrange the cups or glasses on thecup heating surface on the top of thecoffee system.

Adjusting the coffee dispensers to the cup height

27

You can adjust the main dispenser tosuit the height of the cup you are usingso that the coffee or espresso will notcool down as quickly and the crema willhave a better consistency.

Pull the main dispenser down until itis at the same level as the rim of thecup.Alternatively, push the maindispenser up until there is enoughroom to fit a larger cup or mugunderneath.

Preparing beverages

28

You can choose from a variety ofspecialty coffees:

– Ristretto is a concentrated, strongespresso. The same quantity ofcoffee powder as for an espresso isprepared with very little water.

– Espresso is a strong, aromaticcoffee with a thick hazelnut-browncream layer – the crema – on top. Use espresso-roasted coffee beansfor preparing espresso.

– Coffee differs from espresso bythe increased amount of water andthe roast of the beans.Use coffee beans of the correct roastto make coffee.

– Lungo coffee is a coffee withsignificantly more water.

Danger of burning and scaldingfrom the dispensers.The liquids and steam dispensed arevery hot.Keep away from the area underneaththe dispensers when hot liquids andsteam are being dispensed.Do not touch hot components.

Making a coffee drink

Place a cup under the maindispenser.

Select a drink.

– Espresso

– Coffee

– in Additional programs :Ristretto, Long Coffee

Dispensing will start.

To ensure that any residues from thefactory testing process are removedfrom the brewing system, pleasediscard the first two cups of coffeewhen using the appliance for the firsttime.

Preparing beverages

29

Canceling preparationTo cancel preparation:

Tap the drinks button or for drinksfrom Additional programs again.

Drink preparation will be canceled.

Tip: You can cancel making a drink bytapping OK as soon as Stop appears inthe display.

When making coffee with milk or twoportions of a drink you can canceleach stage individually.

Tap OK.


Double portionYou can dispense two portions into onecup or dispense two portions into twocups at the same time.

To fill two cups at the same time,place a cup under each coffee spout.

Tap .

Select a drink.

Two portions of the desired drink will bedispensed from the main dispenser.

Tip: Tip: If, after a while, you have nottapped one of the drink buttons, the"Double portion" option will revertback to single portions.

Preparing beverages

30

Making coffee drinks fromground coffeeTo make espresso or coffee usingground coffee, add a portion of groundcoffee to the ground coffee chute.This gives you the option of preparing acup of decaffeinated coffee, forexample, even though the coffee beancontainer is filled with roasted coffeebeans.

The coffee system will automaticallyrecognize that ground coffee has beenplaced in the chute.

Only one portion of coffee or espressocan be prepared at a time when usingground coffee.

Adding ground coffee

Add a maximum of two scoops ofground coffee to the coffee chute. Iftoo much is added, the brew unit willnot be able to process the coffee.

The coffee system will use all theground coffee that has been added tothe chute to make the next coffee.

Use the scoop supplied with theappliance to ensure the correct amountof ground coffee is used.

Open the ground coffee chute.

Use the measuring spoon to addready ground coffee to the chute.

Add a maximum of two level spoonsof coffee to the ground coffee chute.

Close the coffee chute.

Use ground coffee appears on thedisplay.

Making coffee with ground coffeeIf you want to make a drink with pre-ground coffee:

select Yes and tap OK.

You can now choose which coffee drinkto make with ground coffee.


Select a drink.

The coffee machine will now preparethe desired drink.

If you select No and confirm with OK,the ground coffee is emptied unusedinto the waste container. The appliancewill rinse itself.

Preparing beverages

31

Drinks with milk

Caution! Danger of burning andscalding from the main dispenser.Liquids and steam dispensed will bevery hot.

Only use plain milk. Most sugaryadditives can clog the milk lines. anddamage the appliance.

As soon as you select a drinkcontaining milk the appliance will startto heat up. The milk will be drawn upinto the central spout where it is heatedby steam and also frothed for drinksrequiring milk froth.

If you have not made any milk drinksfor a while, rinse the milk systemthoroughly before making the firstdrink to ensure any bacteria isflushed out.

The following drinks with milk can bemade:

– Cappuccino consists of approx.2/3 milk froth and 1/3 espresso.

– Latte macchiato consists of 1/3each of hot milk, milk froth andespresso.

– Caffè latte consists of hot milkand espresso.

Hot milk and milk froth can also bemade.

Tip: Using cold milk (< 50°F/10°C) willproduce the perfect milk froth.You can select milk with a fat contentaccording to preference. With wholemilk (at least 3.5% fat), the milk frothwill be slightly creamier.

Milk flask

(Supplied with CM 6310)

The stainless steel flask keeps milk coolfor longer. Good milk froth can be madewith cold milk (< 50°F/10°C).

Connect the stainless steel suctiontube to the inside of the lid. Makesure that the slanted end is pointingdownwards as shown.

Fill the milk flask up to max. 3/4" (2cm) below the rim with milk. Seal themilk flask with the lid.

Connect the milk tube to the top ofthe lid. Make sure that the connectingpiece clicks into position.

Preparing beverages

32

Place the milk flask on the right-handside of the coffee system. Connectthe other end of the milk tube to themain dispenser.

Using milk cartons or bottles

The milk tube for cartons and othersuitable containers is located behindthe appliance front.

Connect the milk pipe to the aperturein the main dispenser.

Place a container with sufficient milkbeside the coffee machine.

Place the end of the milk tube in thecontainer making sure that it issufficiently immersed in the milk.

Preparing drinks with milk

Place a suitable container under themain dispenser.

Select a drink.

– Cappuccino

– Latte macchiato

– in Additional programs: Caffè Latte, HotMilk, Milk Froth

The drink will now be made.

Preparing beverages

33

Preparing the hot water (CM6310)

Caution! Danger of burning andscalding. The water dispensed isvery hot.

Place a suitable container under thehot water spout.

Tap .

Select Hot water and tap OK.

Hot water will run into the containerunder the hot water spout.

To cancel preparation

tap OK.


Preparing user profile drinksYou can enter individual profiles to caterfor different tastes and preferences.

If you have already created your ownprofile (see "User Profiles"), you canselect this to make a drink according toyour own taste.

Tap .

Select the profile with the arrowbuttons and tap OK.

The name of the selected user profilewill appear in the top of the display.

You can now make your drink.

Grinder setting

34

When the beans are ground correctly,the coffee or espresso will flow evenlyinto the cup with a good crema.The crema should have an evennutbrown colour.

The grinder setting you select will beused for all coffee drinks.

There are various ways to tell whetherthe coffee grinder is set correctly.

The coffee is ground too coarse, if

– espresso or coffee flows into the cuptoo quickly.

– the crema is very pale and uneven.

Set a finer grinder setting.

The coffee is ground too fine, if

– espresso or coffee flows into the cupvery slowly.

– the crema is dark brown.

Set a coarser grinder setting.

To avoid damaging the grinder,please note the following:Only adjust the grinder one setting ata time.Grind the coffee beans again if youwant to adjust the grinder to the nextsetting.

Open the appliance door.

Push the slide control one setting tothe left (for finer grinding) or onesetting to the right (for coarsergrinding).

Close the appliance door.

Opening the appliance resets theinternal counter for emptying the driptray and the grounds container.

Empty the drip tray and groundscontainer.

Prepare a coffee drink.

After that, you can adjust the grindersetting again.

The altered grinder setting will not beused until after the second coffee hasbeen dispensed.

Amount of coffee, brew temperature and pre-brewing

35

You can adjust the amount of coffee,the brew temperature and pre-brewingindividually for each coffee drink. To dothis, first select the drink from theParameters menu and then adjust thedrink parameters.

Tap .

Select the drink you want and tapOK.

The current settings for the amount ofcoffee, brewing temperature and pre-brewing will be displayed for this drink.

Select Amount of coffee, Brewtemperature or Pre-brewing.

Select the setting you want andtap OK.


Amount of coffeeThe coffee system can grind and brew6-14 g of coffee beans per cup. Thegreater the quantity, the stronger thecoffee.

There are various ways to tell whetherthe amount of coffee is set correctly.

The amount of coffee is too low, if

– espresso or coffee flows into the cuptoo quickly.

– the crema is very pale and uneven.

– the espresso or coffee lacks body.

Increase the amount of coffee so thatmore ground coffee is brewed.

The amount of coffee is too high, if

– espresso or coffee flows into the cupvery slowly.

– the crema is dark brown.

– the espresso or coffee tastes bitter.

Decrease the amount of coffee so thatless ground coffee is brewed.

Tip: If the coffee is too strong for you orit tastes bitter, try a different type ofbean.

Brewing temperatureThe ideal brewing temperature willdepend on:

– the type of coffee,

– whether an espresso or a coffee isbeing prepared, and

– the altitude of the region.

If the coffee system is located at morethan 6562 ft. (2000 meters) above sealevel, the brewing temperature needs tobe set lower due to the change inpressure. This is because the boilingpoint for water at a high altitude abovesea level is lower than the boiling pointfor water at sea level.

Tip: Not all types of coffee canwithstand high temperatures. Certaintypes are too delicate - the crema ontop would not be as good and the tastewould be impaired.

Amount of coffee, brew temperature and pre-brewing

36

Pre-brewing ground coffeeWhen the pre-brewing function isturned on, the freshly ground coffee isfirst moistened with a little hot water.Then the remaining water is forcedthrough the moistened coffee at highpressure. This helps release the flavorof the coffee.

You can set pre-brewing for a normallength of time or an extra long length oftime. Alternatively, you can turn off the"Pre-brewing" function. The machine is supplied with the "Pre-brewing" function turned off.

Portion size

37

The flavor of the coffee produceddepends not just on the type of coffeeused, but also on the amount of waterused. You can program the amount of waterto suit the size of your cups and thetype of coffee you are using.

For coffee drinks that use milk you canalso set the amount of milk or milk frothto be dispensed with these drinks.Additionally, you can set the portionsizes for hot milk and milk froth alone.

Each type of drink has a maximumportion size that can be programmedinto the appliance. The coffee machinehalts preparation of the coffee once thisportion size has been reached. Themaximum possible portion size for thistype of drink is then saved in theappliance.

If the water container becomes emptywhile making a drink, the appliancewill stop programming the portionsize. The portion size will not besaved.

There are two ways of initiating theprogramming of the portion size:

– By tapping the drink button when youare preparing a coffee; or

– by selecting Portion size in theParameters menu.

The changed portion size is alwayssaved in the current User profile. Thename of the current profile appears inthe top left-hand side of the display.

Changing the portion sizeduring drink preparation

Portion sizes for Espresso andCoffee


Tap or until Change appears inthe display.

Dispensing will start.

You can set the portion size as soonas Save appears in the display.

When the cup is filled up to thedesired level, tap OK.

From now on the programmed portionsize will be dispensed for this drink.

Portion size

38

Portion sizes for cappuccino andlatte macchiato


Tap or until the ingredients forthat drink are shown in the display.

– Cappuccino: milk froth, espresso

– Latte macchiato: hot milk, milk froth,espresso

Select all the components you wantto change with the arrow buttons.Confirm them individually with OK.

A check mark placed in front of aningredient indicates that its quantitywill be changed.

Select Start and tap OK.

The coffee machine will startdispensing.You can now set the portion size foreach ingredient selected as soon asSave appears in the display.

When the quantity for each ingredientreaches the desired level, tap OK.

Save the required portion size for theselected components.

The programmed mix of ingredients andportion sizes will now be dispensedevery time that particular drink isselected.

Portion sizes for ristretto, coffeeAmericano, caffé latte, hot milk andmilk froth


Tap .

Select a drink.

Select Portion size and tap OK.

You can change the amount of eachcomponent for caffè latte (hot milk,coffee) as described under "Portionsizes for cappuccino and lattemacchiato".

For ristretto, coffee Americano milkfroth and hot milk, proceed asdescribed under "Setting portion sizesfor espresso and coffee".

Portion size

39

Selecting portion size in theParameters menu Tap .

Select the drink with the arrowbuttons and tap OK.

Use the arrow buttons to selectPortion size and tap OK.

From this point onwards the procedureis identical to programming the portionsize during drink preparation.

Changing the portion size fordifferent user profilesYou can set the portion size forindividual drinks for each user profile.

Tap .

Select the user profile.

The name of the current user profile isshown at the top left of the display.

Now you can change the portion size asdescribed previously (see "Selectingportion size in the"Parameter" menu"or "Changing the portion size whilemaking a drink").

User profiles

40

If the coffee system is used by severalpeople with different coffeepreferences, you can create individualuser profiles in addition to the Mieleprofile.

In each user profile, you can makesettings for individual drinks (portionsize, amount of ground coffee, brewingtemperature and pre-brewing).


Accessing a user profile Tap .

You can now create a user profile.

If you have allocated a profile inaddition to the Miele standard userprofile, you have the following options:

– Select profile from the user profilesthat have already been allocated.

– Change name if the name of a userprofile needs to be changed.

– Delete profile if you want to delete auser profile.

– Change profile to set whether thecoffee system automatically alwaysreverts to the Miele standard userprofile or retains the last selecteduser profile.

Tip: Tap or "Profile" to return tothe main menu.

Creating a user profile Use the arrow buttons to select

Create profile and tap OK.

Letters will appear in the display thatyou can select with the arrow buttons.You can use the arrow buttons to selectfrom numbers, upper case and lowercase letters.

Tap arrow buttons to select thecharacter and then tap OK.

The character will then appear in theline above.

Repeat the process until the desiredname appears in the display lineabove.

Tip: You can delete the last characterentered by tapping .

When you have finished entering aname and want to save it,

use the arrow keys to highlightthe check and tap OK.

If you do not want to save what youhave entered,

tap and hold until all charactershave been deleted and the coffeesystem jumps back to the previousmenu.

The last created profile is selected asthe current profile.

User profiles

41

Selecting a user profile

This selection is only possible if aprofile has been allocated in additionto the Miele standard user profile.

Use the arrow buttons to selectSelect profile and tap OK.

Select the profile with the arrowbuttons and tap OK.


Changing the name


Use the arrow buttons to selectChange name and tap OK.

Proceed the same as with "Createprofile":

– Select to delete a character.

– To enter new characters, highlight therelevant character and confirm withOK,

– Save the new name by selecting inthe display and tapping OK.

Deleting a user profile


Use the arrow buttons to selectDelete profile and tap OK.

Select the profile you wish to delete.

Tap OK.

A check will appear after the nameand the user profile will be deleted aftera short time.

Changing a user profileYou can program the coffee system sothat it changes back to the Mielestandard profile automatically after eachdrink is dispensed, so that the Mieleprofile is always active when theappliance is switched on or so that itretains the most recently selectedprofile.

Select Change profile and tap OK.

You now have the following options:

– Manually: The selected user profileremains active until you selectanother user profile.

– After each use: The appliance willchange back to the Miele standarduser profile automatically after a drinkis dispensed.

– When turned on: Each time theappliance is switched on it willautomatically select the Mielestandard user profile regardless ofwhich user profile was set before theappliance was last switched off.

Select the required option and tapOK.

Settings

42

Accessing the "Settings" menu Tap Settings.

Now you can check or change anysettings.

The check next to the individual entryshows you which setting is currentlyactive.

Tap Back if you want to access theprevious menu. Tap Settings to return to Select drink.

Changing and saving settings Tap Settings.

Select the setting you wish to changewith the arrow keys and tap OK.

Use the arrow keys to highlightthe required option. Then tap OK.


Settings

43

Setting optionsThe factory default for each option is indicated by *.

Menu item Available settings

Language German*, English and other languages

Country

Time Clock format

– 12 h / 24 h*

Set

Timer Set : Turn on at / Turn off after (12:30)* / Turn off at

Activate : Turn on at (Yes / No*) / Turn off at (Yes / No*)

Eco mode On* / Off

Lighting Set the brightness

Info Number of drinks

– Total no. of uses / Espresso / Coffee / Coffee Americano /Cappuccino / Latte macchiato / Caffè latte / Milk froth / Hotmilk / Hot water

No. of uses until appliance needs descaling:

No.of uses until brew unit needs degreasing:

System lock On / Off*

Water hardness Soft

Medium

Hard*

Very hard

Settings

44

Menu item Available settings

Display brightness Set the brightness

Volume Buzzer tones

Keypad tone

Cup heating On / Off*

Showroom program Demo mode (On / Off*)

Factory default Do not reset

Reset

The lighting, cup heating and volume functions are only available on the CM6310.

Settings

45

LanguageYou can select the language (andcountry variant of that language) for alldisplay text.

Tip: If you select the wrong languageby mistake, you can find the"Language" option by following the flagsymbol .

Time of dayYou can set the clock display and thetime of day.

Clock Format

Available options are:

– 24-hour display (24 h)

– 12-hour display (12 h)

Setting

Use the arrow keys to set the hoursand minutes.

TimerThe timer offers the following options:

The coffee system:

– switches on at a particular time, e.g.in the morning for breakfast (Turn onat).

– switches off at a particular time (Turnoff at),

– switches off after a particular lengthof time if no buttons have beenpressed (Turn off after).

For Turn on at and Turn off at to be set,the timer must be activated.

Turn on at:

Please note that the coffee system willnot turn on at the time specified if youhave activated the system lock.


If the coffee system has turned itself onthree times via the Turn on at timerfunction and no drinks have beendispensed, the machine will not switchitself on again automatically. Thisprevents the coffee system fromswitching itself on unnecessarily, forexample, while you are away onvacation.The programmed times will, however,remain in memory and will bereactivated after manually switching themachine on again.

Settings

46

Turn off at


In the event of a longer absence theprogrammed times will remain inmemory and will be reactivated aftermanually switching the machine onagain (see "Turn on at").

Turn off after

If none of the keys have been pressedor no drink has been prepared, thecoffee system will turn itself off after 30minutes to save energy.

You can change this pre-setting usingthe arrow buttons to a timebetween 15 minutes and 9 hours.

Activating and deactivating the timer

When the system lock is activated, theTurn on at option for the timer cannotbe selected.

Select the timer function you want touse.

The selected option will have a nextto it.

Tap the arrow button repeatedlyuntil Accept is highlighted. Then tapOK.

Eco modeEco mode is an energy-saving mode.

If Eco mode is switched on, the coffeemachine will heat up anew every time adrink is made, so that making a drinktakes longer.

If Eco mode is turned off, significantlymore energy is used. The coffeemachine heats up for the first drinkpreparation after being switched on.After that the appliance remains heatedup and drinks can be prepared withouthaving to wait very long.

The coffee machine will indicate thatthe energy consumption has beenaltered.

Lighting(CM 6310)

Change the brightness using the arrowbuttons .

If no keys are touched or maintenanceprograms carried out, the lighting willturn off after approximately 7 minutesto save energy.

Tip: To switch off the lights, touch thearrow buttons until no moresegments are filled in and Turned offappears.

Settings

47

Info (displaying information)Under the Info menu option, you canchoose to display the number ofportions made for each type of drink.

You can also see whether there aremore than 50 portions before the nextdescaling or degreasing of the brew unit(No. of uses until).

Tip: To return to the previous display,tap OK.

Locking the coffee system(System lock )You can lock the coffee system toprevent it being used without yourknowledge, by children, for example.

Activating and deactivating thesystem lock

When the system lock is activated, thetimer settings for Turn on at aredeactivated. The coffee system willnot switch on at the time set.

Temporarily overriding the systemlock

While the message Press and hold the OKbutton for 6 seconds to unlock is in thedisplay,

tap OK for 6 seconds.

As soon as the coffee system isturned off, the system is locked again.

Settings

48

Water hardnessSee "Before using for the first time" forinformation about water hardness.

Display brightnessChange the display brightness usingthe arrow keys .

Volume(CM 6310)

The volume of the alarm and the sensorbuttons can be set using the arrowbuttons .

Tip: To switch off the tones, touch thearrow buttons until no moresegments are filled in and Turned offappears.

Cup heating(CM 6310)

See "Cup heating" for moreinformation.

Factory default settingYou can reset the settings back to theones which were set when the coffeesystem was delivered - the factorydefault settings.

The number of drinks and the appliancestatus (No. of drinks until ...) cannot bereset.

Please refer to the "Setting options"chart for the factory settings that areshown in bold.

The following settings will not bereset:

– Language

– Time of day

Settings

49

Showroom program (Demomode)

Do not activate this setting fordomestic use.

The coffee system can be presented inMiele Showrooms of retail stores withthe Showroom program function. Thelighting will come on, but drinks cannotbe dispensed and other actions cannotbe carried out.

If you activate the Demo mode, youcannot turn the appliance off with theOn / Off button .

Cleaning and care

50

The coffee system must be cleaned regularly to prevent a build-up ofbacteria.

Overview

Recommended frequency What do I have to clean / maintain?

Daily (at the end of the day)

Water container

Grounds container

Drip tray and drip tray cover

Stainless steel milk flask

Once a week (more often if heavily soiled)

Main dispenser with cappuccinatore

Brew unit

Area underneath the brew unit

Housing (particularly important immediately after descalingthe appliance)

Once a month Bean container and ground coffee chute

When prompted Milk pipework

Brew unit (degrease with the cleaning tablets)

Descaling the appliance

Cleaning and care

51

Clean by hand or indishwasherThe following must be cleaned by handonly:

– Stainless steel central spout cover

– Brew unit

– water reservoir lid

– Bean container lid

– Stainless steel milk flask

– Lower panel

Some components of the coffeesystem are dishwasher-safe.However, cleaning these in thedishwasher frequently can causethem to become discolored due toregular contact with food residues(e.g. tomatoes) in the dishwasher.The surface of these componentscan also become damaged.

The following parts are dishwasher-safe:

– Drip tray and lid

– Drip tray cover

– Waste unit

– Water container

– Central spout (without stainless steelcover)

Danger of burning and scaldingon hot components or by hot liquids!Always allow the coffee machine tocool down before cleaning it.Caution: Water in the drip tray can bevery hot.

Do not use a steam cleaner toclean this machine. Steam couldcause a short circuit.

It is important to clean the machineregularly as used coffee grounds gomouldy quickly. Milk residue can spoiland clog the milk pipework.

Cleaning and care

52

All external surfaces are susceptibleto scratching. Scratches on glasssurfaces could even cause abreakage. Contact with unsuitablecleaning agents can discolor theexternal surfaces. Wipe up anyspillages or splashes of descalingagent immediately.

To better maintain your applianceavoid the following:

– Cleaning products containing soda,ammonia, acid, or chloride

– Cleaners containing solvents

– Lime removers

– Stainless steel cleaners

– dishwasher detergent,

– Oven cleaners

– Abrasive cleaning agents, e.g.powder cleaners and cream cleaners

– Scouring pads, such as potscrubbers and brushes, or usedsponges that still contain abrasivecleanser residue

– Eraser sponges

– Metal scrapers

Glass cleaners may be used to cleanthe exterior. However do not allowthem to sit or "puddle", this can causedamage to the surface.Remove the cleaner promptly.

Cleaning and care

53

Drip tray and groundscontainer

Clean the drip tray and groundscontainer every day every day toavoid unpleasant smells and mildew.

The grounds container is located in thedrip tray. Water from rinsing alsocollects in the grounds container.

A prompt will appear in the coffeesystem display when the drip tray and/or the grounds container is full andneeds to be emptied. Empty the driptray and the grounds container.

Danger of burns.If the rinsing process has justfinished, wait a while beforeremoving the drip tray as the waterused for rinsing will run out of thecoffee spouts.

Push the main dispenser up as far asit will go.

�

��

Then pull the drip tray carefully out ofthe appliance. Take the lid off.

Empty the drip tray and groundscontainer.

Remove the drip tray cover andthe lower panel .

Clean all parts thoroughly.

Clean the lower panel by hand onlyusing warm water and a littlewashing-up liquid.All other parts are dishwasher safe.

Clean the inside of the applianceunderneath the drip tray.

Reassemble all parts and place thedrip tray back in the coffee system.

Make sure the drip tray has beenpushed into its niche as far as it willgo.

Cleaning and care

54

Drip tray cover Remove the drip tray cover.

The drip tray cover can be cleaned inthe dishwasher or by hand usingwarm water and dishwashing liquid.

Dry the drip tray cover thoroughly.

Refit the drip tray cover making surethat it is correctly fitted (seeillustration).

Water container

Clean the water reservoir lid by handonly using warm water anddishwashing liquid.

Press the lid on the right-hand side.

Pull the water reservoir up by the lidto remove it.

Take the lid off the container andwash it by hand.

The water reservoir can be cleaned inthe dishwasher, or by hand usingwarm water and dishwashing liquid.After cleaning, dry the water reservoir.

Carefully clean the surface the waterreservoir sits on, particularly the slots.

Fit the lid back on the container.

Make sure that the valve, theunderside of the water reservoir andthe surface the water reservoir sits onare clean. Otherwise the waterreservoir will not sit correctly.

Cleaning and care

55

Stainless steel water intakevalve filterThe stainless steel water intake valvefilter is located in the recess for thewater container.

Particles in the water can collect on thefine mesh in the filter. Therefore thestainless steel filter should be checkedmonthly for soiling.

Remove the water container.

Clean the stainless steel filter withwater only without detergent in orderto avoid possible unpleasant flavors.

Check the stainless steel filter forsoiling and clean it if necessary, e.g.with a damp cotton swab.

Replace the water container.

Main dispenser withcappuccinatore

Clean the main dispenser cover byhand only using warm water anddishwashing liquid.

All other components are dishwashersafe.

Push the main dispenser right downand remove the stainless steel coverby pulling it off towards you.

Pull the dispensing unit off towardsyou.

Cleaning and care

56

Twist the upper section with theholder for the milk pipework and pullit off. Then pull the Y-shaped piece off. Remove the dispensing spouts.

Clean all parts thoroughly.

Clean the surfaces of the maindispenser with a damp cloth.

If the milk pipe is blocked, clean itunder running water with the brushsupplied:

Insert the brush in the tube and moveit back and forth as far as it will gountil all milk residue has beenremoved.

Fit the dispensing unit back together.

Push the dispensing unit back ontothe main dispenser. Press firmly toensure the spouts at the bottomconnect correctly with the edge of thedispenser.

Replace the stainless steel cover andconnect the milk pipe if applicable.

Cleaning and care

57

Stainless steel milk flask(CM 6310)

The milk flask should be taken apartand cleaned every day.

Clean all parts by hand only usingwarm water and dishwashing liquid.Use the cleaning brush supplied toremove milk residue from the milkpipework if necessary.

Rinse all parts carefully under runningwater.

Residual dishwashing liquid can affectthe taste of milk from the applianceand the quality of the milk froth.

Dry all parts thoroughly.

Reassemble the milk flask.

Milk pipework

Make sure that the milk pipeworkis cleaned regularly and thoroughly.Milk contains natural bacteria thatwill multiply if the pipework is notsufficiently clean. Contamination inthe coffee machine can be a healthhazard.

The milk pipework must be cleaned atleast once a week. A message in thedisplay will prompt you when this needsto be done.

Confirm the message with OK.

When you confirm the message Cleanmilk pipework with OK, the internalcounter for the cleaning interval will bereset. You will not be reminded again.

There are two options for cleaning themilk pipework:

– You can remove and dismantle thecentral spout with its integratedcappuccinatore and either wash it inthe dishwasher or by hand with hotwater and a little washing-up liquid(see "Central spout with integratedcappuccinatore").

– Or you can clean the milk pipeworkusing the Clean milk pipeworkmaintenance program together withthe Miele cleaning agent for milkpipework (see "Maintenance program- Cleaning the milk pipework").

Cleaning and care

58

Bean container and groundcoffee chute

Danger of injury from the grinder.Turn the coffee system off at themain switch before cleaning.

Coffee beans contain oils which candeposit on the walls of the beancontainer and hinder the flow of thebeans. Therefore, clean the beancontainer regularly with a soft cloth.

Tip: Use a vacuum cleaner to removeany coffee residues from the beancontainer and the ground coffee chute.

Open the bean container.

Remove any coffee beans.

Clean the bean container with a dry,soft cloth.

The coffee bean container can now berefilled.

If necessary, clean the ground coffeechute:

Open the ground coffee chute andremove any ground coffee residue.

Housing

If soiling is not removed promptly, itcould cause the surface of theappliance to alter or discolor.Remove any soiling immediately.Make sure that water cannot getbehind the display.The surfaces are susceptible toscratching. Contact with unsuitablecleaning agents can alter or discolorthe surfaces.Ensure that any splashes ofdescaling solution are wiped upimmediately.

Turn the coffee system off.

Clean the front of the appliance witha clean sponge and a solution ofwarm water and dishwashing liquid.Dry using a soft cloth.

Cleaning and care

59

Care programsThe following maintenance programsare available:

– Rinsing the coffee system

– Rinsing the milk pipework

– Cleaning the milk pipework

– Degreasing the brew unit

– Descaling the machine

Perform the respective maintenanceprogram when prompted to do so in thedisplay. You will find more information inthe following pages.

Accessing the "Maintenance" menu

Tap .

With the arrow key , selectMaintenance. Then tap OK.

Now you can select a maintenanceprogram.

Rinsing the coffee systemYou can rinse the water and coffeepipework of the coffee machinemanually.

After a coffee has been dispensed, theappliance is rinsed before it turns off.This removes any residual coffeegrounds.

Tap .

Select Maintenance and tap OK.

Select Rinse appliance and tap OK.

The piping will now be rinsed through.

You may also be prompted to insert theend of the milk pipe into the drip tray.

Cleaning and care

60

Rinsing the milk pipeworkMilk residue can clog up the milk pipesand so the milk pipework should berinsed regularly. If a drink has beenmade using milk, the prompt to insertthe end of the milk tube into the driptray will appear at the latest when youswitch the appliance off.

You can also rinse the milk pipeworkmanually.

Tap .


Select Rinse milk pipework and tap OK.

When prompted, place the end of themilk tube into the right-hand aperturein the drip tray.

Tap OK.

The milk pipework will now be rinsed.

Cleaning the milk pipeworkwith the maintenance programWe recommend using the Miele milkpipework cleaning agent for cleaningthe milk pipework. This has beenspecially developed for use with Mielecoffee machines and preventssubsequent damage.

It is available from Miele dealers, MieleService or www.miele-store.com

The maintenance program Clean milkpipework lasts about 15 minutes.

Tap .


The cleaning process cannot becancelled once it has started. Theprocess has to be completedthrough to the end.

Select Clean milk pipework and tap OK.

The process will start.

Follow the instructions in the display.

Place milk pipe in cleaning agent appearson the display.

Making a cleaning solution:

Dissolve the powder in a containerwith approx. 1 cup (200 ml) oflukewarm water. Stir the solution witha spoon until it has fully dissolved.

Cleaning and care

61

Carrying out the cleaning process:

Place the container next to theappliance and hang the milk pipe inthe solution. Make sure it is placedfar enough into the cleaning solution.

Tap OK.

Follow the further instructions givenin the display.

The cleaning process is complete whenrinsing has finished.

Degreasing the brew unit andcleaning insideDepending on the natural oil content ofthe coffee used, the brew unit canbecome blocked quite quickly. It mustbe degreased regularly in order toensure aromatic coffee and trouble-freeoperation of the coffee machine.

For optimum cleaning we recommendMiele cleaning tablets. These cleaningtablets are specially designed for Mielebuilt-in coffee machines and will protectyour machine from subsequentdamage.They are available from the MieleWebstore, Miele Technical Service orfrom your Miele dealer.

The "Degrease brew unit" maintenanceprogram lasts about 15 minutes.

After 200 portions have beendispensed, Degrease the brew unit andclean inside of the machine will appear inthe display.


This notification appears at regularintervals. Once the maximum possiblenumber of beverage preparations hasbeen reached, the coffee machine islocked.

You can turn off the coffee machine ifyou do not want to carry out thecleaning program at this time. However,you will be not be able to make anymore drinks until the brew unit has beendegreased.

Start "Degrease brew unit"

Tap .


Cleaning and care

62

Select Degrease the brew unit.

The cleaning process cannot becancelled once it has started. Theprocess has to be completed throughto the end.

Tap OK.



Cleaning the brew unit and inside it

Clean the brew unit by hand onlyusing warm water. Do not use liquiddish soap. The moving parts of thebrew unit are lubricated. Liquid dishsoap will damage the brew unit.For good tasting coffee and toprevent germs from forming, removeand clean the brew unit underrunning water once a week.

Rinse the brew unit by hand and clean insidethe machine appears on the display.

Open the appliance door.

Press the button on the end of thehandle of the brew unit and whiledoing so turn the handlecounterclockwise .

Carefully pull the brew unit out of thecoffee machine.

If you cannot remove the brew unit orcan only do so with difficulty, the brewunit is not in the correct position (See"Frequently asked questions").

When you have removed the brewunit, do not change the position ofthe handle on the brew unit.

Clean the brew unit by hand underhot running water without usingdetergent or liquid dish soap.

Cleaning and care

63

Wipe any remaining coffee off the twofilters (see arrows).

Dry the funnel to prevent groundcoffee sticking to it the next time acoffee is prepared.

Make sure to remove moist groundcoffee remnants regularly to preventbacteria from forming.

Clean the inside of the coffeemachine. Make sure that the areashighlighted in the illustration arecleaned extremely carefully.

Tip: Use your vacuum cleaner toremove dry coffee grounds.

Place a cleaning tablet in the brew unit,place it in the machine and close themachine door. appears on the display.

Drop a cleaning tablet into the top ofthe brew unit (arrow).

Push the brew unit with cleaningtablet back into the coffee machine,making sure it is straight.

Press the button on the end of thehandle of the brew unit and whiledoing so turn the handle clockwise.

Close the appliance door.

Follow the further instructions givenin the display.

The cleaning process is complete whenrinsing has finished.

Cleaning and care

64

Degrease the brew unit followingdisplay reminder

No drinks can be made and Degreasethe brew unit appears in the display.

The maintenance program cannot becancelled. The process has to becarried through to the end.

Tap OK.

The maintenance program will thenstart.

Descaling the machine

65

Important! When descaling theappliance, cover delicate surfacesand natural flooring to preventdamage from splashes of descalingsolution.Ensure that any splashes ofdescaling solution are wiped upimmediately.

Lime scale builds up in the coffeesystem through use. How often theappliance needs to be descaled willdepend on the water hardness level inyour area. It should be descaledregularly to ensure that it functionscorrectly.

The appliance will guide you throughthe descaling process. Variousmessages will appear in the display,e.g. you will be prompted to empty thedrip tray or fill the water reservoir.

The descaling process is required andtakes approx. 12 minutes.

The coffee machine prompts you whenit needs to be descaled. "No. ofportions until appliance needsdescaling: No. of uses until applianceneeds descaling: 50 appears in thedisplay. Each time a drink is made thecoffee machine displays the number ofportions remaining until descaling mustbe carried out.


When the number of remaining portionsreaches 0, the system will lock.

You can turn off the coffee machine ifyou do not want to descale it at thistime. However, you will be not be ableto make any more drinks until descalinghas been carried out.

Descaling following displayreminderDescale the appliance appears in thedisplay.

The descaling process cannot becancelled once you have tapped"OK." The process has to becompleted through to the end.

Tap OK.



When Fill the water container with descalingagent and lukewarm water up to thedescaling symbol and place in applianceappears in the display, proceed asfollows.

Preparing the descaling solution

We recommend using Miele descalingtablets for optimum results.These have been specially developedfor use with Miele coffee machines andprevent subsequent damage.

Other descaling agents, whichcontain other acids besides citricacid and/or other undesirablesubstances, such as chlorides forexample, could damage the coffeemachine. Moreover, the descalingeffect required may not beguaranteed if the descaling solutionis not of the appropriateconcentration.

Miele descaling tablets are available toorder via the Miele Webstore, fromMiele Service or from your Miele dealer.

Descaling the machine

66

You will need 1 descaling tablet todescale the appliance.

Fill the water reservoir to the markwith lukewarm water.

Place 1 descaling tablet in the water.

Follow the instructions for the mixingratio carefully. It is important that youdo not fill the water reservoir with toomuch or too little water. Otherwisethe descaling process will becancelled prematurely.

Performing a descale

Replace the water reservoir.

Follow the instructions given in thedisplay.

When Rinse the water container and fill withfresh tap water up to the descaling symbol appears in the display:

Carefully rinse the water reservoirwith clean water. Ensure that nodescaling solution residue remains inthe water reservoir. Fill the waterreservoir to the mark with fresh tapwater.

The descaling program is finished at theend of the rinsing cycle and drinks canbe made again.

To protect the appliance andsurrounding surfaces from damage,make sure you wipe up any spills orsplashes of descaling agentimmediately.

Descaling when not promptedby a message Tap .


Select Descale the appliance.

The descaling process cannot becancelled once you have tapped"OK." The process has to becompleted through to the end.

Tap OK.

The descaling process will begin.

Frequently Asked Questions

67

Most problems that occur during daily use can be easily corrected. With the helpof the following guide, you will be able to find the causes of problems and rectifythem. However, please note:

Important! Never open the casing of the appliance.Repairs and other work by unqualified persons could be dangerous. Themanufacturer cannot be held responsible for unauthorized work.Repairs to electrical appliances should only be carried out by a suitablyqualified person in accordance with local and national safety regulations.

If you cannot remedy the problem yourself, please contact Miele.

Messages in the display

Fault messages must be confirmed with OK, otherwise the message canreappear in the display even though the problem has been remedied.

To address the fault, follow the instructions on the display.

If the fault message appears in the display again, contact Miele.

Message Possible cause and solution

F1, F2,F80, F82

There is an internal fault. Switch the coffee machine off with the On/Off

button . Wait for approx. one hour beforeswitching it back on again.

F41, F42, F74, F77, F235,F236

There is an internal fault. Turn the appliance off with the On / Off button .

Wait for 2 minutes before turning it back on again.


68


F73 orCheck the brew unit

The brew unit cannot be positioned correctly. Turn the appliance off with the On / Off button. Remove and clean the brew unit (see "Removing

the brew unit and cleaning it by hand").

Push the coffee ejector of the brew unit into thecorrect position (see diagram).

Do not insert the brew unit. Close the appliancedoor and turn the appliance on with the On/Offbutton .

This will initialize the brew unit motor and put in backinto the start position. When Insert the brew unit appears in the display,

open the appliance door and put the brew unitback in the appliance. Then close the door.


69


Too much ground coffee There is too much ground coffee in the coffee chute.If more than two level scoops of ground coffee isadded to the coffee chute, the brew unit cannotprocess the coffee. The ground coffee will be directedinto the waste unit and the fault message will appearin the display. Turn the appliance off with the On / Off button. Remove and clean the brew unit (see "Removing

the brew unit and cleaning it by hand"). Remove the ground coffee inside the coffee

system, e.g. with a vacuum cleaner. Use the coffee scoop supplied to add ground

coffee to the ground coffee chute. Add only amaximum of two portions of ground coffee to thechute.


70

Unusual performance of the coffee system

Problem Possible cause and solution

The display remainsdark when the coffeesystem is turned onusing the On / Off button.

The On / Off button was not touched for longenough. Tap the On / Off button and keep it pressed for

at least 3 seconds.The main switch is set to "0". Set the main switch to the "I" position.

The plug is not properly plugged into the electricaloutlet. Insert the plug into the electrical outlet.

The fuse has tripped because the coffee system,voltage or another appliance is defective. Reinsert the plug.. Contact a qualified electrician or Miele Service for

assistance.

CM 6310:The lighting remains offafter the coffeemachine has beenturned on.

The lighting has been turned off. Turn the lighting on (see "Settings - Lighting").

The lamp is defective. Contact Miele Technical Service.

The coffee system turnsoff suddenly.

The switch-off time programmed using the timer hasbeen reached. If required, you can select a new switch-off time

(see "Settings - Timer").The plug is not properly plugged into the electricaloutlet. Insert the plug into the electrical outlet.

CM 6310:The coffee machine isswitched on. Thelighting switches offsuddenly.

This is not a fault. The lighting turns off approximately7 minutes after the coffee machine was last used.

The buttons do notreact to touch.The appliance cannotbe operated.

There is an internal fault. Set the main switch to the "0" position. Disconnect the power supply by switching off at

the wall socket and withdrawing the plug, orswitching off the circuit breaker.


71


The coffee system doesnot switch itself on,although the timersetting Turn on at hasbeen activated.

The system lock feature has been activated. You need to deactivate the system lock (see

"Settings - System lock").The appliance was not used after being switched onautomatically three times in succession. Switch the appliance on and dispense a drink.

The display is hard tosee or not legible.

The display brightness has been set too low. Change this setting (see "Settings").

Fill and replace the watercontainer appears in thedisplay even though thewater container is fulland is in the appliance.

The water container is not sitting properly in theappliance. Remove the water container and replace it. Check the stainless steel water intake valve filter

and clean if necessary (see "Stainless steel waterintake valve filter").

The water container was not correctly filled up andinserted during descaling. Fill the water container to the descaling mark°

and restart the descaling program.

Fill and replace the watercontainer appears afterswitching on eventhough the container isfilled and fitted in theappliance. Theappliance does notrinse.

The coffee system needs to be descaled. Turn the coffee system off with the On / Off button

. Wait approx. 1 hour. Then switch the appliance on again. As soon as

PreHeating appears in the display, tap andselect Descale the appliance.

Descale the coffee system.

After switching on theappliance the messageEmpty the drip tray and thewaste container appearseven though they areboth empty.

This is not a fault.The drip tray and grounds container was probably notemptied after making the last coffee, or the internalcounter was not reset. Remove the drip tray and grounds container from

the appliance and empty them.

Neither milk nor milkfroth comes out of thecentral spout.

The milk pipework is blocked. Clean the main dispenser, taking particular care to

clean the cappuccinatore and milk pipes carefullywith the cleaning brush.


72


Empty the drip tray and thewaste container appearsin the display, eventhough the drip tray isempty.

The drip tray is not positioned correctly in theappliance. Push the drip tray in as far as it will go. Make sure that the lower panel is sitting on the

drip tray correctly.

Insert the drip tray and thewaste container appearsin the display eventhough both are fitted.

The drip tray is not correctly fitted and is therefore notdetected. Empty the drip tray and the grounds container.

Reassemble all parts and place the drip tray andthe grounds container back in the coffee system.

The service is open. Close the service door. If necessary, empty the drip tray and the grounds

container. Reassemble all parts and place the driptray and the grounds container back in the coffeesystem.

The drip tray or thegrounds container istoo full or runs overalthough the drip trayand the groundscontainer were emptiedafter each message onthe display.

This is not a fault.The drip tray and grounds container were probablyremoved or the appliance was opened without thedrip tray and grounds container being emptied. Whenthe drip tray is removed or the appliance opened, theinternal counter for emptying the drip tray andgrounds container is automatically reset. Remove the drip tray and grounds container from

the appliance and empty them.

Fill the beancontainer appears in thedisplay even though thebean container has justbeen filled.

This is not a fault. Confirm the message with OK.

The coffee system doesnot rinse itself whenturned on.

This is not a fault.If the coffee system still has an operatingtemperature higher than 140°F (60°C), rinsing will nottake place.


73


Drink preparation hasbeen cancelled.

If the grounds container becomes empty while adrink is being made, the message Continuepreparation? will appear in the display after thegrounds container has been refilled and put back inthe appliance. If you do not confirm this messagewith Yes within five minutes, preparation will becancelled.

Coffee dispensing isrepeatedly interruptedand the message Fill thebean container appears inthe display.

This is not a fault.The brew unit does not sense the ground coffee.Withparticular types of coffee, it can happen that too littlecoffee is ground or the ground coffee is too fine.Usually the grinding – fine and the ground coffeequantity – are set too low.


Tip: If the coffee is too strong for you or it tastesbitter, try another type of bean.

If the message appears during the preparation of allcoffee specialties: Set the grinder to a coarser setting (see "Grinder

setting"). Check the settings for the amount of coffee for all

coffee specialties (see "Amount of coffee"). Ifnecessary, select a larger amount of coffee.

Also consider any changed drinks in "User profiles".If the message only appears during the preparation ofselected coffee specialties: Check the settings for the amount of coffee for this

coffee specialty (see "Amount of coffee"). Select aamount of coffee.

You may also need to set a slightly coarser grindersetting.


74


The descaling programwas startedunintentionally.

The descaling program cannot be stopped once theOK button has been tapped.Descaling must be continued through to completion.This is a safety precaution to make sure the machineis descaled correctly. This is important for thelongevity and functional efficiency of your coffeesystem.

Descale the coffee system (see "Descaling").

Coffee is not flowingout of the central spout,or is only beingdispensed via onespout.

The main dispenser has a blockage. Clean the coffee pipework (see "Cleaning and care

- Rinsing the machine").

If there is still no coffee coming out, or coffee is onlycoming out of one side Dismantle the main dispenser and clean all parts

carefully (see "Cleaning and care - Main dispenserwith integrated cappuccinatore").

Make sure all parts are reassembled correctly.

Milk is dripping out ofthe cappuccinatoreeven though no milk isbeing dispensed.

The level of milk in the milk flask is higher than thecappuccinatore. Push the main dispenser up as far as it will go.

The display lights upbut the coffee machinedoes not heat up and nodrinks are made.The coffee machinecannot be turned offwith the On/Off button.

The Demo mode of the coffee system has beenactivated. Deactivate the Demo mode (see "Settings - Demo

mode").


75

Unsatisfactory results


The coffee is not hotenough.

The cup has not been pre-heated.The smaller the cup and the thicker its walls, the moreimportant it is to pre-heat it.

Pre-heat the cups, e.g. using the cup heating(according to model).

The brewing temperature is set too low. Set a higher brewing temperature (see "Brewing

temperature").The brew unit filters are blocked. Remove and clean the brew unit by hand (see

"Removing the brew unit and cleaning it by hand"). Degrease the brew unit (see "Brew unit").

Heating-up is takinglonger. The amount ofwater is no longercorrect and the coffeemachine is notperforming properly.Coffee flows into thecup very slowly.

The coffee machine needs to be descaled. Descale the coffee machine.

The consistency of themilk froth isunsatisfactory.

The milk temperature is too high. Good milk froth canbe achieved when cold milk (< 50°F/10°C) is used. Check the temperature of the milk in the milk flask.

The milk pipework is blocked. Clean the central spout with integrated

cappuccinatore and the milk pipework with thecleaning brush supplied.

The coffee grindermakes a louder noisethan usual.

The coffee bean container has become empty duringthe grinding process. Fill the coffee bean container with fresh beans.

There may be stones in among the coffee beans. Turn the coffee system off immediately. Contact

Miele.


76


The coffee flows tooquickly into the cup.

The grind level is too coarse. Set the grinder to a finer setting (see "Setting the

coffee grinder").

The coffee trickles tooslowly into the cup.

The grind level is too fine. Set the grinder to a coarser setting (see "Grinder

setting").

The crema on thecoffee or espresso is"not right".

The grinder setting is not correct. Set the grinder to a finer or coarser setting (see

"Grinder setting").The brew temperature is too high for the type ofcoffee being used. Set a lower brewing temperature (see "Brewing

temperature").The coffee beans are no longer fresh. Add fresh beans to the coffee bean container.

Transport

77

If the coffee system will not be used foran extended period of time, e.g.vacation, or will be transported over along distance, the appliance should beprepared as follows.

– Empty and clean the coffee beancontainer

– Empty and clean the water reservoir

– Evaporating the coffee system

– Clean the drip tray and groundscontainer

– Pack the appliance securely

Evaporating the coffee systemThe coffee system should beevaporated before it is stored for a longperiod of time or transported anydistance - particularly at temperaturesbelow freezing.

Evaporating the appliance involvesremoving all traces of water from thesystem to prevent the risk of water andfrost damage.

Turn the coffee system off with theOn / Off button .

Tap .

Tap twice.

Empty the system? appears on thedisplay.

Select Yes and tap OK.


Caution! Hot steam will berelease from the hot water dispenser- Danger of burns!

The evaporation process is finishedwhen Program finished appears in thedisplay.

Set the main switch to the "0"position.

Clean the drip tray and groundscontainer.

The coffee system is now ready to bepacked.

PackagingThe coffee system should only bepacked when it is clean and dry.Residues of coffee grounds can causescratches on surfaces. Coffee and milkresidues or water can cause a build-upof bacteria.

Use the original packaging includingStyrofoam to pack the coffee system.

Also pack the operating instructions sothat they are available when the coffeesystem is next used.

Technical Service

78

After sales serviceIn the event of a fault that you cannotcorrect yourself, please contact

– Your Miele dealer

or

– Miele Technical Service

The telephone number for Miele islisted at the back of these instructions.

Miele Technical Service requires themodel and serial number of yourcoffee machine. This information can be found on thedata plate:

WarrantyFor more information, please refer to theincluded warranty.

MieleCare (USA only)

MieleCare, our Extended ServiceContract program, gives you theassurance of knowing that yourappliance investment is covered by 5years of worry free ownership.

MieleCare is the only Extended ServiceContract in the industry that guaranteesrepairs by a Miele Authorized ServiceProvider using genuine Miele parts.Only genuine Miele parts installed byfactory trained professionals canguarantee the safety, reliability, andlongevity of your Miele appliance.Please note that unless expresslyapproved in writing by Miele’s Servicedepartment, Extended ServiceContracts offered by other providers forMiele products will not be recognizedby Miele. Our goal is to preventunauthorized (and untrained) servicepersonnel from working on your Mieleproducts, possibly doing furtherdamage to them, you and/or yourhome.

To learn more about MieleCareExtended Service Contracts, pleasecontact your appliance dealer or visit usonline at:http://mieleusa.com

Saving energy

79

If the default settings for the "Ecomode" or "Timer" functions have beenaltered, the coffee system's energyconsumption will increase.

This setting uses more energy appears inthe display.

Pre-heating cups with hotwaterIf you only want to pre-heat your cupsoccasionally, you can switch cupheating off (CM 6310).

You can then use hot water to pre-heatthe cups.

Turning the coffee system offwith the main switchIf the coffee machine is not going to beused for a longer period of time, set themain switch to "0".

Electrical connection

80

All electrical work should beperformed by a qualified electricianin strict accordance with nationaland local safety regulations.Installation, repairs and other workby unqualified persons could bedangerous.

Verify that the voltage, load and circuitrating information found on the dataplate match the household electricalsupply. This data must match toprevent damage to the coffee system. Ifin doubt, consult a licensed electrician.

The data plate can be found behind thedrip tray inside the coffee system.

The appliance is supplied with a powercable ready for connection to an AC120 V 60 Hz supply.

Connect the coffee system only to aproperly installed outlet with groundingcontact.Fuse rating must be at least 15 A.

The socket should be next to theappliance and easily accessible.

To reduce the risk of injury, do notdrape cord over the counter top or tabletop where it can be pulled on bychildren or tripped over unintentionally.

Do not connect the appliance to apower inverter or directly to powerproduced outside of the normalelectrical grid (i.e. direct solar or windpower source).

Direct connection to such powersources can cause power surges andtripped breakers when the appliance isturned on, and could damage theappliance.

Do not connect the appliance to energysaving plugs or outlets. The reductionof power to the appliance caused bythese devices will cause the applianceto run hot and may damage it and/orshorten its usable life.

Do not operate any appliance with adamaged cord or plug. Contact MieleTechnical Service.

If there is any question concerningthe electrical connection of thisappliance to your power supply,please consult a licensed electricianor contact Miele’s Technical ServiceDepartment.

WARNING: THIS APPLIANCE MUSTBE GROUNDED

Tip: If the power cord is too long, pushit up through the opening at the back ofthe appliance.

Installation

81

Danger of overheating!Please ensure that there is adequateventilation around the appliance.Do not cover the appliance with dishtowels or similar objects while it is inuse.

Danger of overheatingIf the coffee machine is installedbehind a kitchen furniture door, itmay only be used with the furnituredoor open.Do not close the furniture door whilethe coffee machine is in use.

Please observe the following installationinstructions:

– The location of the appliance must bedry and well ventilated.

– The ambient temperature of the roomin which the appliance is used mustbe between +50°F and +100°F(+10°C and +38°C).

– The coffee system must be set up ona level surface. The surface must bewater resistant.

If the coffee system is installed in aniche, the niche must provide thefollowing minimum dimensions:

Height 20" 508 mm

Width 17 11/16" 450 mm

Depth 21 7/8" 555 mm

When setting up the appliance: makesure that the front of the appliancecan be fully opened so that the brewunit can be removed with ease whenrequired.

The appliance must be set up in theniche such that it sits flush with thefront edge of the niche.

Appliance dimensions

82

Appliance dimensions

83

Technical data

84

Current draw in standby mode (default setting):

<0.5 watt

Pump pressure: max. 217 psi (15 bar)

Through-flow heater: 1 stainless steel thermo block

Dimensions (W x H x D): 10" x 14 1/8" x 16 3/4" (251 x 359 x427mm)

Net weight: 22 lbs (9.9 kg)

Power cord length: 4' 7" (140 cm)

Water reservoir capacity:

approx. 7 1/2 cups (1.8 l)

Bean container capacity:

approx. 0.6 lbs (300 g)

Stainless steel milk flask capacity*:

approx. 7 1/2 cups (0.5 l)

Grounds container capacity:

max. 10 portions of coffee grounds

Main dispenser: Height adjustable from 3 1/8"-51/2" (80-140 mm)

Grinder: Stainless steel mill

Grinder setting: Adjustable in 5 settings

Ground coffee amount: max. approx. 0.4 ounces (12 g)

(The stainless steel milk flask is supplied with the CM 6310).

9 Independence WayPrinceton, NJ 08540Phone:Fax:www.mieleusa.com

U.S.A.Miele, Inc.

National Headquarters

Please have the model and serial numberof your appliance available before contacting Technical Service.

CanadaImporterMiele Limited

Headquarters and Miele Centre

800-843-7231609-419-4298

Technical Service & SupportNationwidePhone:Fax:[email protected]

161 Four Valley DriveVaughan, ON L4K 4V8www.miele.ca

800-999-1360888-586-8056

Customer Care CentrePhone:

[email protected]

800-565-6435905-532-2272

International HeadquartersMiele & Cie. KGCarl-Miele-Straße 2933332 GüterslohGermany

M.-Nr. 10 608 760 / 00en – US, CA

CM6110, CM6310

Date post:	06-Oct-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Operating Instructions Coffee MachineGreen coffee beans are very hard and still contain a certain...

Documents