CURRICULUM VITAE

Personal Information:

Name: Kamran Hassani Current Position: Faculty member (Associate Professor)

Address: Biomedical Engineering Department, Science and Research Branch of Islamic Azad University,

Tehran, IRAN.

Tel: +98(21)44868548(work),44108276(Home),88804771(work)

Fax: +98(21)88804778 Cell Phone: 09125155886

Email: K.Hasani@srbiau.ac.ir/Inspect@chagalesh.com

Google scholar site:

https://scholar.google.com/citations?user=wgHRa7YAAAAJ&hl=en&oi=ao

Citation indices All Since 2012

Citations 469 418 h-index 13 13

i10-index 14 14

EDUCATION:

B.Sc.: Mechanical Engineering, Isfahan University of

Technology, 1996. M.S.c.: Biomedical Engineering, Iran University of Science and

Technology,2001.

Ph.D.: Biomedical Engineering, Amirkabir University (Polytechnique),2006 .

RELEVANT EXPERIENCE:

2006-2009 Lecturer, Biomedical Engineering Department,

Amirkabir University of Technology (Tehran Polytechnic), Tehran.

2009-Present Associate Professor, Biomedical Engineering

Department, Science and Research Branch of

Islamic Azad University. Tehran.

2009-Present Conducting common projects with Cleveland clinic Institute with following titles:

“Color Spectrographic Phonocardiography Applied to the

Detection and Characterization of Heart Murmurs”

“Digital Subtraction Phonocardiography Applied to the Detection and Characterization of Heart Murmurs”

“Separation of S1 and S2 sounds in Systole/Diastole phases”

“Multi-Channel Acoustics Monitor for Perioperative Respiratory Monitoring” INTERNATIONAL JOURNALS PUBLICATIONS:

-ALI RAMEZANI, ALI TAVAKOLI GOLPAYGANI, KAMRAN HASSANI, Design and

Construction of a Novel Automated and Portable Chest Compression Device,

Modares Mechanical Engineering,18(1), 258-264,2018.

-Behzad Hassani, Fathallah Karimzadeh, Mohammad Hossein Enayati, Fabian Mutschlechner, Rudolf Vallant, Kamran Hassani, The effects of friction stir

processing on the wear behavior of cast AZ91C magnesium alloy,

International Journal of Materials Research Volume 109, Issue 3 (March

2018).

- Farhad Azimifar, Kamran Hassani, Amir Hossein Saveh, Farhad Tabatabai Ghomshe, Performance analysis in delayed nonlinear bilateral teleoperation

systems by force estimation algorithm, Transactions of the Institute of Measurement and Control ,DOI: 10.1177/0142331216688751 | First

Published February 1, 2017.

-,Farhad Azimifar, Kamran Hassani, Amir Hossein Saveh, Farhad Tabatabai Ghomshe, A low invasiveness patient’s specific template for spine surgery,

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine,Vol.201,Issue:2,2017.

- T Rezaee, K Hassani, Numerical investigation of the hemodynamics in the

fetal umbilical vein/ductus venosus based on experimental data. Bioscience Reports, Vol.36, 2016, BSR20160099.

-Parham Atefvahid , Kamran Hassani, Kamal Jafarian, D. John Doyle Hessam Ahmadi, Analysis of central venous pressure (CVP) signals using

mathematical methods. Journal of Clinical Monitoring and Computing,Vol.30, Number.3, 2016. DOI 10.1007/s10877-016-9882-0.

-Kamal Jafarian, Majid Amineslami, Kamran Hassani, Mahdi Navidbakhsh,

Mohammad Niakan Lahiji, D. John Doyle, A multi-channel acoustics monitor for perioperative respiratory monitoring: preliminary data. Journal of Clinical

Monitoring and Computing.Vol.30, Number.1, 2016.

-Farshid Rezaei, Kamran Hassani, Nosratollah Solhjoei, Alireza Karimi, Carbon PEEK composite materials as an alternative for stainless

steel/Titanium hip prosthesis: a finite element study. Australian Journal of

Physics and Engineering in Medicine. Vo.38, Number.4, 2015. -Ali Tavakoli,Nahid Abolpour, Kamran Hassani,Kourosh Bajelani,D.John Doyle,

Detection and Identification of S1 and S2 heart sounds using wavelet decomposition method. International Journal of Biomathematics, Vol.8,No.6,

2015.

-Hatef Sabooni , Kamran Hassani and Hamidreza Ghasemi Bahraseman,

Modeling of Iliac artery aneurysm using FSI method. Journal of Mechanics in Biology and Medicine,15(3),2015.

- Baharak Ebrahimi and Kamran Hassani , Modeling of Superior

Mesenteric Artery Aneurysm Using FSI, Journal of Mechanics in Biology and Medicine, 15(1),2015.

- A.Karimi,K.Hassani, M.Navidbakhsh, Modeling of red blood cell in a capillary using FSI method. Biocybernetic and Biomedcial Engineering

Journal.In Revision.

- Karimi A, Navidbakhsh M, Yamada H, Rezaee T, Hassani K., A comparative study on the quasilinear viscoelastic mechanical properties

of the umbilical artery and the umbilical vein, Perfusion. 2014 May 22. pii: 0267659114536761.

-M.Abdi, A.Karimi,M.Navidbakhsh,G.P.Jahromi, and Kamran Hassani, A lumped parameter mathematical model to analyze the effects of tachycardia and

bradycardia on cardiovascular system. International journal of numerical modeling: Electronic networks, devices, and fields.28:346-357, 2015.(ISI)

-Karimi A, Navidbakhsh M, Rezaee T, Hassani K., Measurement of the circumferential mechanical properties of the umbilical vein: experimental and

numerical analyses, , Vo.18, No.13, 2015,(ISI). -M.Abdi,A.Karimi,M.Navidbakhsh,M.Rahmati,K.Hassani, Modeling of coronary

artery balloon-angioplasty using equivalent electrical circuit, Biomedical

Engineering, Basis and Communication Volume 26, Issue 03, June 2014.(ISI)

- K Hassani, K Bajelani, M Navidbakhsh, DJ Doyle, and F Taherian, Heart sound segmentation based on homomorphic filtering, Perfusion ,Vol.29(4) ,2014.(ISI)

- HG Bahraseman, K Hassani, A Khosravi, M Navidbakhsh, DM Espino, N Fatouraee,

and D Kazemi-Saleh.Combining numerical and clinical methods to assess aortic valve hemodynamics during exercise. Perfusion ,Vol.29(4),2014. (ISI)

-Estimation of maximum intraventricular pressure: a three-dimensional fluid–

structure interaction model, Hamidreza Ghasemi Bahraseman, Kamran Hassani, Arezoo khosravi, Mahdi Navidbakhsh, Daniel M Espino, Davood Kazemi-Salehand Naser Fatourayee, Biomedical Engineering Online,12:122,2013(ISI).

-Modeling of cerebral aneurysm using equivalent electrical circuit(Lumped model).M.Abdi,A.Karimi,M.Navidbakhsh,K.Hassani, and S.Faghihi. Journal of Perfusion, Vo.29, No.2, 2014. (ISI)

-Kourosh Bajelani, Mahdi Navidbakhsh,Hamid Behnam, John D Doyle, Kamran

Hassani. Detection and identification of first and second heart sounds using

empirical mode decomposition. Journal of Engineering in Medicine, Part.H. Volume

227, No.9, 2013.(ISI).

-Hamidreza Ghasemi Bahraseman, Kamran Hassani, Mahdi Navidbakhsh, Daniel M. Espino, Zahra Alizadeh Sani and Nasser Fatouraeee, Effect of exercise on blood

flow through the aortic valve: a combined clinical and numerical study, Journal of Computer methods in biomechanics and biomedical engineering, Vol.17,No.16,2014

. (ISI)

-Alireza Sanati, Kamran Hassani,Mahdi Navidbakhsh, The effects of

implanting different stents on the blood hemodynamic in coronary

arteries, Biomedical Engineering, Basis and Communication, Vo.25,No:4,2013.

- Alireza Karimi, Mahdi Navidbakhsh, Ahmad Shojaei, Shahab Faghihi; Kamran Hassani, A finite element investigation on plaque vulnerability

in healthy and atherosclerotic human coronary arteries. Journal of

Engineering in Medicine, Part.H. Volume 227, No.2, 2012.(ISI). - Reza Ramezani Sarbandi, Kamran Hassani,John D. Doyle and Mahdi Navidbakhsh. Color Spectrographic Phonocardiography for the Detection

and Characterization of Pediatric Heart Murmurs: A Case Series. Biomedical Engineering, Basis and Communication, Vol.24,No.3,

2012.(ISI)

1. -R.Heydary Forushani i ,Kamran Hassani and Farhad Izadi, . Steady State

Heat Analysis of the Eye Using Finite Element Method. Biomedical

Research, 2012; 23 (1): 99-104.(ISI)

- Akbari M.ALI, Hassani K, Doyle JD, Navidbakhsh M, Sangargir M, Bajelani K and Ahmadi Z SADAT .Digital Subtraction Phonocardiography

(DSP) applied to the detection and characterization of heart murmurs , Bio Medical Engineering On Line 2011, 10:109 (ISI)

-Raya Majdani Shabestari,Kamran Hassani and Farhad Izadi. Modeling of Abdominal Aorta Aneurysm and study of The pathology using CFD

method, Biomedical Engineering, Basis and Communication, Vol.23,No.4, 2011.(ISI)

-R.Ramezani,J.D.Doyle,M.Navidbakhsh, K.Hassani, Hassan Torabiyan,

Color Spectrographic Phonocardiography Applied to the Detection

and Characterization of Heart Murmurs, Biomedical Engineering

Online,10:42,2011.(ISI)

-M.Abdolrazaghi,M.Navidbakhsh, K.Hassani, F.Izadi, Study of left

ventricle pressure-volume loops in renal stenosis case using equivalent

electrical circuit, Journal of computer science and systems

biology,Vol.3,Issue.4,2010.

-M.Abdolrazaghi, M.Navidbakhsh, K.Hassani, Mathematical Modeling of

Cardiovascular System, Journal of Cardiovascular Engineering, Volume 10,

Number 2 / June, 2010.(ISI)

-M.Abdolrazaghi, M.Navidbakhsh, K.Hassani, Analysis of Intra-Aortic

Balloon Pump Model with Ovine Myocardial infarction.Anatolian Journal

of Cardiology, 2009, 9:492-498.(ISI)

-M.Abdolrazaghi, M.Navidbakhsh , K.Hassani, Mathematical modeling of

Intra-Aortic balloon pump, Computer Methods in Biomechanics and

Biomedical Engineering Journal,Volume 13, issue 5,2010,1-10.(ISI)

-M.Abdolrazaghi, M.Navidbakhsh , K.Hassani, Abdominal and Thoracic

Aortic Aneurysm Modeling, American Journal of Applied Sciences 5 (8):

1052-1058, 2008.

-K. Hassani, M. Navidbakhsh, M. Rostami, Modeling of the aorta artery

aneurysms and renal artery stenosis using cardiovascular electronic

system, Biomedical Engineering Online Journal. 6: 22, 2007.(ISI)

-K. Hassani, M. Navidbakhsh, M. Rostami,Simulation of Aorta Artery

Aneurysms Using Active Electronic Circuit, American Journal of Applied

Sciences 4 (4): 203-210, 2007.

-K. Hassani, M. Navidbakhsh, M. Rostami,Simulation of The

Cardiovascular System Using Equivalent Electronic System,Biomed Pap

Med Fac Univ Palacky Olomouc Czech Repub 150(1):105–112, 2006.(ISI)

LOCAL JOURNALS:

1- Abdi M, Karimi A, Navidbakhsh M, Rahmati M. A, Hassani K., Razmkon A, Modeling the Circle of Willis Using

Electrical Analogy Method under both Normal and Pathological Circumstances, J Biomed Phys Eng 2013;

3(2).

2- Arezoo Khosravia, Hamidreza Ghasemi Bahrasemanb, Kamran Hassanib, and Davood Kazemi-Saleha, Numerical

method to measure velocity integration, stroke volume and cardiac output while rest: using 2D fluid-solid interaction model. Engineering Solid Mechanics.2014

Presentations:

-Kamran Hassani,Taraneh Rezayee, The Effects of

Different Material Properties on the Hemodynamics of Human Fetal Umbilical Vein/Ductus Venosus: CMBBE

2018,Feburary,2018.

- Kamran Hassani, Kamal Jafarian, D John Doyle, Heart Sounds Features Usage for Classification of Ventricular

Septal Defect Size in Children, The 17th International Conference on Biomedical Engineering: ICBME 2016, 7th

to 10th December 2016, Singapore.

-K Hassani, A Karimi, AT Golpaygani, Numerical Modeling

of the Red Blood Cell Motion/Deformation in the Capillary, XIV Mediterranean Conference on Medical and Biological

Engineering and Computing,2016, Cyprus.

-K Hassani, K Jafarian, An Intelligent Method for Breast Cancer Diagnosis Based on Fuzzy ART and Metaheuristic

Optimization. XIV Mediterranean Conference on Medical and Biological Engineering and Computing,2016, Cyprus.

-K.Hassani and Farshid Rezaee,Carbon/PEEK composite

materials as an alternative for Stainless Steel/Titanium hip prosthesis, ICBT 2015,Hannover, Germany.

-K.Hassani, H.Ghasemi,D.M.Espino, Estimation of

maximum intraventricular pressure using FSI

method,CMBBE 2014,Amsterdam,Netherlands.

-K. Hassani , K. Bajelani, M.Navidbakhsh, John Doyle, Detection and Identification of S1 and S2 Heart Sounds

Using Wavelet Decomposition and

Reconstruction,MEDICON 2013,IFMBE,Sevile,Spain.

-H.R.Ghasemi Bahraseman, K.Hassani, M.Navidbakhsh, N.Fatouraee,D.M.Espino, Z.Alizadeh.Sani, Modeling of

Blood flow through a flexible aortic heart valve in different

heart rates, CMBBE 2012 Conference, Berlin, Germany.

-Kamran Hasani and Roya Heidari Forushani, Heat

Analysis of the Eye Using Finite Element Method, 5th

European Conference of the International Federation for Medical and Biological Engineering,IFMBE Proceedings,

2012, Volume 37.

- R. Ramezani, M. Navidbakhsh, J. Doyle, K. Hasani and H. Torabian, Color Spectrographic Phonocardiography (CSP) applied to the Detection

and Characterization of Heart Murmurs, International Journal of

Cardiology,Volume.147,Suppl.1,2011.

-Mona Abdolrazaghi, Mahdi Navidbakhsh and K.Hassani, Analysis of Intra-

Aortic Balloon Pump Model with Ovine Myocardial Infarction,CMBBE 2010

Conference,Valencia,Spain.

-Omid Ghasemalizadeh, Mohammad Reza Mirzaee, Bahar

Firoozabadi, K. Hassani: Exact Modeling of Cardiovascular System Using

Lumped Method.Biocomp 2008: 408-41.

-Mona Abdolrazaghi, M. Navidbakhsh and K.Hassani,Study of left

ventricle pressure- volume loops in abdominal aortic aneurysm utilizing

cardiovascular electronic modeling.The 6th IASTED international

Conference on Biomedical Engineering, Innsbruck, Austria, 13-15 Feb,

2008.

- K. Hassani, M. Navidbakhsh, M. Rostami,Simulation of Fusiform and

Saccular Aneurysm of Aorta Using Electronic System, The 13th Iranian

Conference on Biomedical Engineering, Sharif University of Technology,

Tehran, Iran,21-22 Feb, 2007.

- K.Hassani, M. Navidbakhsh, M. Rostami,Simulation of Renal Artery

Stenosis Using Cardiovascular Electronic System,MEDICON 2007,

Ljubljana, Slovenia 30 June 2007.

- K. Hassani, M. Navidbakhsh,M. Rostami,Simulation of the cardiovascular

system using equivalent electronic system, Proceedings of the 24th

IASTED international conference on Biomedical engineering Innsbruck,

Austria, pp: 103 - 107,2006.

- K. Hassani, M. Navidbakhsh,M. Rostami,Simulation of Aneurysm in

different sections of Aorta, European Conference on Computational Fluid

Dynamics, ECCOMAS CFD 2006.Netherland.

RESEARCH INTERESTS:

Cardiovascular Biomechanics, Heart Sounds

Modeling of Biological Systems/Cardiovascular system and related diseases

Arterial wall biomechanics and vascular remodeling General Biomechanics

Non Destructive Tests (RT,UT,PT,MT)

COURSES TAUGHT:

BS.C: Dynamics, Thermodynamics, Fluid Mechanics, Mechanical Design,

Heat Transfer, Statics, Vibrations, Strength of Material

Technical English Language

MS.C: Continuum Mechanics, Biofluid

Mechanics, General Biomechanics, Mechanics of Heart and Vascular System.

Ph.D: Special Topics in Cardiovascular

System, Mechanics of Circulation, Elasticity,

List of granted projects

1- Color Spectrographic Phonocardiography Applied to the

Detection and Characterization of Heart Murmurs Kamran Hassani and John D.Doyle.

Islamic Azad University grant

2- Digital Subtraction Phonocardiography Applied to the Detection

and Characterization of Heart Murmurs.

Kamran Hassani and John D.Doyle

Islamic Azad University grant

3- Separation of S1 and S2 sounds in Systole/Diastole phases.

Kamran Hassani and John.D.Doyle.

Islamic Azad University grant

4- Multi-Channel Acoustics Monitor for Perioperative Respiratory

Monitoring.

Kamran Hassani and John D.Doyle.

Islamic Azad University grant

5- Combining numerical and clinical methods to assess aortic valve

hemodynamics during exercise.

Kamran Hassani, Mahdi Navidbakhsh

Iran University of science and technology grant

6- Manufacturing the multi plax simulator.

Kamran Hassani and Ali Tavakoli Golpaygani.

Iran Technical & Vocational Training Organization grant.

7- Color Spectrographic Respiratory Monitoring from

the External Ear Canal.

Kamran Hassani and John Doyle,

Islamic Azad University,Tehran

PROJECTS:

Supervisor: 60 undergraduate Final year B.Sc. Projects

25 M.Sc. Projects majored in cardiovascular

engineering/Biological Systems, Modeling CVS and Diseases of CVS.

3 Ph.D projects majored in detection of Heart and respiratory sounds.

VOLUNTARY CONTRIBUTIONS:

Reviewer: Reviewer for the following national and international

journals and conferences:

Anatolian Journal of Cardiology. Biomedical Engineering online journal

The Internet Journal of Bioengineering Computers in Biology and Medicine

STATEMENT OF RESEARCH INTEREST

My current research interests are primarily in the areas of cardiovascular engineering, Heart/Lung sounds, and study of the

mechanical engineering applications in biomedical engineering. Under the supervision of Professor Mahdi Navidbakhsh, I have

modeled the cardiovascular system using an equivalent electronic system and studied two important pathologies including aorta

aneurysms and renal stenosis. Modeling and simulation are key tools which enable biomedical scientists to study the biological

systems. In my research, I have tried to advance existing models by increasing more segments and parameters. The model has been

validated using experimental data and it mimics the human

cardiovascular system with good precision.

I would like to continue my research of cardiovascular engineering

and heart/lung sounds by:

1-Improving the existing models in different aspects of

cardiovascular system

2- Analysis and detection of heart, lung, and other biological

sounds using signal processing method.

3- Study of different mechanical engineering applications.

4- CFD and FSI study of blood hemodynamics.

I also have interests in a number of areas of biomechanics including biofluid and heart mechanics. Although we have started to conduct new project with other labs in abroad but I think

working individually in a recognized lab would help me to learn new things. To conclude, I am highly interested in increasing the

number of persons of color who pursue Master’s and doctoral degrees in mathematics, engineering and biomedical engineering

sciences. I would like to express the interest at the level of associated professorate by writing grants and proposals that would fund programs designed to increase the number of persons of color

who pursue advanced degrees in the areas listed above. In the future I wish to gain the tools necessary to participate in an

advanced degree program in biomechanics. This may involve

developing research seminars, colloquia, or graduate courses.

TEACHING INTERESTS

Description of Teaching Interests

Teaching has been an important part of my life. I would be delighted to

have the opportunity to teach and mentor students at the university.

I have extensive teaching experience in a range of biomechanics science.

During graduate school, I was a teaching assistant for Static, Dynamics

and Thermodynamics. I have been teaching a number of students in

Thermodynamics, Fluid Mechanics, Mechanical design, Vibrations,

Dynamics, Heat transfer, Special topics in CVS, Mechanics of Circulation

and bio instrument at Science branch of Islamic Azad University, I am

advising and supervising ten graduate students in their research as well

as two Ph.D candidates. Finally, I have advised thirty undergraduate

students in their research projects at the university.

I look forward to teaching and mentoring at the university. In addition to

teaching traditional courses in biomedical engineering and biomechanics,

I

would enjoy developing new courses. I am particularly interested in

offering a new graduate and upper-level undergraduate course on

cardiovascular modeling and related pathology. This course would explore

the new methods of modeling and simulating the system and the

pathologies.

I am also interested in bringing new approaches to the teaching of

existing

courses. My goal in teaching will be to empower students to become

leaders within their chosen field. To that end, I will try to emphasize

critical thinking, creativity, collaboration and communication skills in

addition to the problem-solving skills that will make them experts in a

subject. Finally, I would like to create opportunities for undergraduate to

participate in research as early as possible.

References:

1- Professor John D.Doyle,

Professor of Anesthesiology

Cleveland Clinic Lerner College of Medicine of Case Western Reserve

University

Staff Anesthesiologist

Department of General Anesthesiology

Cleveland Clinic

9500 Euclid Avenue, E31

Cleveland, Ohio, 44195, USA

doylej@ccf.org [professional]

djdoyle@hotmail.com [personal]

Tel 216-444-1927

Fax 216-444-9247

Cell 216-312-4373

Pager 216-444-2200; ask for pager 29456

http://djdoylemd.googlepages.com

2- Dr.Daniel M.Espino,

Lecturer in Bio-medical Engineering

School of Mechanical Engineering

Telephone +44 (0) 121 414 7355

Email d.m.espino@bham.ac.uk

University of Birmingham

Edgbaston

Birmingham

B15 2TT

UK,

3- Professor Mahdi Navidbakhsh,

Mechanical Engineering Department,

Iran University of Science and Technology,

Tehran, Iran.

Tel:0098-912-1346732(Mobile)

Office:0098-021-77240540-50, Internal line:2933.

Email: mnavid@iust.ac.ir

4-Professor Ali Tavakoli Golpaygani,

Head of Standard Research Institute,

Iranian Standard Institute,

Karaj, Iran.

Tel:0098-912-3380200(Mobile)

Office: +98 26 32806031-8

Email: tavakoli.golpa@gmail.com, atavakkoli@standard.ac.ir