USED FOR
The PieceMaker is an automated Linear Saw that will cut, print and handle the timber you need for your truss, wall and floor manufacturing requirements. It can cut your standard and custom mitres, birdsmouths, raking plates and studs, low angles, long cuts, large timber sections and all your normal standard cutting. It’s the manufacturing centre that every truss plant needs.
FEATURES• Supports all data down loads from all the major
software suppliers• File formats (or supplier files) including but not limited
to: MWF, SSF, TRS v2 and v3• Operational software simple to use and train• Easy to calibrate
STANDARD FEATURES • Dust extraction system • Includes waste conveyor• Ink jet timber printer• Spares kit
OPTIONS• Left or right hand feed • Full perimeter fencing (rear of machine)
PieceMaker
*Specifications and design subject to change, please confirm details when ordering © Spida · 206A900 · August 2020
*Safety fence not included with machine featured, can be purchased as an option
SPECIFICATIONS Cutting heads 1
Motor size 7.5hp
Blade size 450mm
Infeed conveyor 6230mm(L) x 4060mm(W)
Outfeed conveyor 8581mm(L) x 2800mm(W)
Weight 4600kg approx.
Power requirements 63amp, 415V, 3 phase +N +E
Max. depth of cut 100mm
Min. finished length 1mm
Max. finished length 6000mm
Timber height range 35mm -100mm
Timber width range 70mm - 400mm
Minimum mitre angles 15°
Minimum cut angle 2°
Front view
Top view
15520mm
8607mm 1180mm 5733mm
4454
mm
746mm
2322
mm