Power Factor Correction -...

www.epcos.com

EPCOS Product Brief 2017

Power Factor CorrectionPower Quality Solutions

PQS key components from EPCOS cover the entire rangeof products needed for success-ful power factor correction.All parts are carefully matchedto each other. With this uniqueport folio, EPCOS is more thana sup plier of products:Power Quality Solu tions is thestrategy that has been devel-oped to fulfill the demand of themarket to offer solutions ratherthan single components. This product brief gives anoverview of all PQS productsfor power factor correction. For detailed information, pleaserefer to the PFC Product Profileand data sheets, available in theInternet at www.epcos.com/pfc,or contact our local sales office.

PQS key components•PFC capacitors

– PhaseCap Energy/Premium/Compact/HD, DeltaCap,PhiCap, PoleCap

•Power factor controllers andmeasuring devices– BR604, BR6000, BR7000,

BR7000-I– MMI6000, MMI7000 and

MMI8003– Grid analysis tool MC7000-3

•Capacitor contactors– J230/N230 series

•Thyristor modules for dynamic PFC– TSM-LC and TSM-HV series

•Active harmonic filter– PQSine P-series

•Reactors– Antiresonance harmonic filter– Discharge reactor

•Accessories

EPCOS_Product_Brief_PFC_161123 23.11.16 11:56 Seite 1

2 © EPCOS AG 2017

Power Factor Correction:Capacitors

Technical data

Series PhaseCap Energy PhaseCap Premium PhaseCap Compact PhaseCap HD

Two versions of power Premium power Compact power High-density power capacitors for low-voltage capacitors for low-voltage capacitors for low-voltage capacitors for low-voltage power factor correction power factor correction power factor correction power factor correction

Features

Technology MKK MKK MKK MKK

Inrush current High pulse current High pulse current High pulse current High pulse current withstand capability withstand capability withstand capability withstand capability up to 500 · IR depending up to 300 · IR up to 400 · IR up to 300 · IRon the type; best in class

Discharge resistor/ Ceramic discharge Ceramic discharge Ceramic discharge External discharge module resistor pre-mounted resistor pre-mounted resistor pre-mounted; module pre-mounted

up to 525 V AC; up to 660 V AC; external dischargeexternal discharge external discharge module for types ≥690 Vmodule ≥600 V AC module ≥690 V AC

Safety system B25674: triple Triple: Dual: Triple:B25675: dual • Self healing • Self healing • Self healing

• Overpressure • Overpressure • Overpressure disconnector disconnector disconnector

• Dry technology • Dry technology

Impregnation B25674: gas filled, dry type Inert gas, dry, non-PCB Semi dry biodegradable Inert gas, dry, non-PCBB25675: soft resin resin, non-PCB

Rated voltage VR 230 … 690 V AC 230 … 800 V AC 230 … 1000 V AC 400 … 525 V AC

Power QR 5 … 33 kvar 5 … 33 kvar 5 … 37.1 kvar 40 … 60 kvar

Rated frequency fR 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz

Winding Stacked Concentric Concentric Stacked(S-types stacked)

Mounting position Upright/horizontal Upright/horizontal Upright/horizontal1) Upright

Ordering code B25674* B25667C* B25673A* B25669*B25675* B25673S*

Applications

• Automatic PFC • Automatic PFC • Automatic PFC • Automatic PFC equipment, equipment equipment equipmentcapacitor banks • Individual fixed PFC • Individual fixed PFC • Individual fixed PFC

• Individual fixed PFC • Fixed PFC • Fixed PFC • Fixed PFC(e.g. motors, • Tuned and detuned • Tuned and detuned • Detuned capacitor bankstransformers, lighting) capacitor banks capacitor banks

• Group fixed PFC • 690 and 800 V AC series • 690 to 1000 V AC series • Tuned and detuned for usage in harsh for usage in harsh

capacitor banks application conditions, application conditions, • Dynamic PFC e. g. industrial e. g. industrial

applications with heavy applications with heavy harmonic loads harmonic loads

1) PhaseCap Compact S-types and DeltaCap: when mounting in horizontal position, additional mechanical support is recommended to prevent breaking of mounting bolt in case of mechanical shock or vibrations. This support should be placedat short distance below the bead at the top end of the capacitor.


3© EPCOS AG 2017

Power Factor Correction:Capacitors

Technical data

Series DeltaCap PhiCap PoleCap

Power capacitors for Power capacitors for Power capacitors for outdoorlow-voltage power factor correction low-voltage power factor correction applications or harshin industrial applications environmental conditions

Features

Technology MKD MKP MKP/MKK

Inrush current High pulse current withstand High pulse current withstand High pulse current withstandcapability up to 200 · IR capability up to 200 · IR capability up to 200 · IR

Discharge resistor/ Discharge module included Ceramic discharge resistor Integrated discharge resistormodule in delivery, integrated in pre-mounted for B32344E series;

terminal for B32304A****A***-series discharge resistors included in delivery for other series

Safety system Dual: Dual: Triple:• Self healing • Self healing • Self healing• Overpressure disconnector • Overpressure disconnector • Overpressure disconnector

• Dry technology

Impregnation Semi-dry biodegradable soft resin, Semi-dry biodegradable soft resin, Inert gas, non-PCBnon-PCB non-PCB

Rated voltage VR 230 … 525 V AC 220 … 660 V AC 400 … 525 V AC

Power QR 0.5 … 33.7 kvar 0.5 … 30 kvar 0.5 … 30 kvar

Rated frequency fR 50/60 Hz 50/60 Hz 50/60 Hz

Winding Stacked Stacked MKP: stackedMKK: concentric

Mounting position Upright/horizontal1) Upright/horizontal1) Upright/horizontal

Ordering code B32300C*/B32303* series: B32340C* series: B25671A*Single phase/three phase, Single-phase, fast-on terminalsfast-on terminals B32343C* series:B32301C*/B32304* series: Three-phase, fast-on terminalsSingle phase/three phase, B32344E* series: screw terminals Three-phase, optimized capacitor

safety terminals

Applications

• Automatic capacitor banks • Fixed PFC• Detuned PFC systems

• Automatic capacitor banks• Fixed PFC applications, e. g.

motor compensation• AC power electronics• Tuned and detuned PFC

systems• Approvals: VDE-approval

• Pole mounted PFC, i.e.outdoor applications

• Fixed PFC inside or outside acabinet in surroundings with highdust or moisture concentrations

• Automatic PFC systems toreduce labor costs

1) PhaseCap Compact S-types, DeltaCap and PhiCap: when mounting in horizontal position, additional mechanical support is recommended to prevent breaking of mounting bolt in case of mechanical shock or vibrations. This support should be placedat short distance below the bead at the top end of the capacitor.


4 © EPCOS AG 2017

Power Factor Correction:Accessories

Accessories

Plastic Protective Case Plastic Protective Terminal Cover Discharge Resistors and ModulesModules for Capacitor Series

Features

Ordering code

Protection class IP54

PhaseCap Premium capacitors

Protection class IP54

PhaseCap PremiumPhaseCap Compact(n/a for Ø 100 mm)

Capacitor d x h116 x 164 mm: B44066X9122116 x 200 mm: B44066X9142136 x 200 mm: B44066X9142

PhaseCapCapacitor d x h116 x 164 mm: B44066K0135A000116 x 200 mm: B44066K0160A000136 x 200 mm: B44066K0210A000

PhiCapCapacitor Ø53 mm: B44066K0530A0001)

63.5 mm: B44066K0635A0001)

75 mm: B44066K0795A00085 mm: B44066K0895A000

Available on request for PhaseCapPremium, PhaseCap Compact,PhaseCap HD, PhiCap B32344series.

On request

1) Protection class IP20


5© EPCOS AG 2017

Power Factor Correction:Key Components

Technical data

Series Power Factor Controllers Power Factor Controllers BR604 and BR6000 BR7000 and BR7000-T

Features

Technical data

• Supply voltage:BR604: 230 V AC, 50/60 Hz BR6000: 110 … 230 V AC, 50/60 Hz

• Measuring voltage: BR604: = supply voltage 230 V AC BR6000: 30 … 525 V AC (L-N) or (L-L)

• Sensitivity: 50 mA/10 mA

• Measuring current BR6000: X:5 A / X:1 A

• Versions BR6000-HD6 and BR6000-HD12 with OLED display

Ordering code

BR604 (4 steps) B44066R6004E230

BR6000-R6 (6 steps) B44066R6006E230

BR6000-R12 (12 steps) B44066R6012E230

BR6000-HD6 B44066R6506E230

BR6000-HD12 B44066R6512E230

BR6000-T6 B44066R6106E230(6 steps for dynamic PFC)

Three-phase measuring

Three-phase display of numerous parameters as real value and in %

Controlling three-phase, single-phase, mixed mode

2 isolated interfaces

Illuminated graphic display, 128 x 64 dots, 8 lines

Menu driven handling (plain language)

HELP-button for interactive help text

BR7000 for conventional PFC systems

BR7000-T for dynamic PFC systems

• Supply voltage: 110 … 230 V AC, ±15%, 50/60 Hz

• Measuring voltage:3 · 30 … 440 V AC (L-N);3 · 50 … 760 V AC (L-L)

• Measuring current: 3 · X:5 A / X:1 A, selectable

• Operating ambient temperature: –20 … +60 °C

BR7000: • 15 relay outputs• 3 additional alarm/message relays• 2 independent interfaces

BR7000-T:• 15 transistor outputs• 3 additional alarm/message relays• 2 independent interfaces

Evaluation software BR7000-SOFT incl. in the delivery

Versions BR7000-HD and BR7000-T-HD with OLED display

BR7000 B44066R7415E230

BR7000-HD B44066R7515E230

BR7000-T B44066R7615E230

BR7000-T-HD B44066R7715E230

PC software BR7000-SOFT see page 6.

Large and multifunctional display(2 x 16 characters, backlight for BR6000 series)BR6000-HD with OLED display


Self-optimizing control capability

Recall function of recorded values

Automatic initialization possible for BR6000


6 © EPCOS AG 2017


Technical data

Series Power Factor Controllers Power Factor ControllersBR7000-I and BR7000-I/S485 BR7000-I-TH and BR7000-I-TH/S485

Features

Technical data

Supply

Ordering code

PC software BR7000-SOFT

Single-phase measuring




BR7000-I standard version

BR7000-I/S485 with interface RS485

Measuring device mode for simultaneous display of 3 parameters (large display also)

3-digit display of the power factor (cos f) / switchable display as tan f

Display of values as bargraph-diagram possible

• Supply voltage: 110 … 440 V AC, ±15%, 50/60 Hz

• Measuring voltage:30 … 440 V AC (L-N); 50 … 760 V AC (L-L)

• Measuring current: X:5 A / X:1 A, selectable

• Operating ambient temperature: –20 … +60 °C

• 12 relay outputs for capacitor

• 1 relay output (message/alarm/fan)

• Standard system interface (e.g. for firmware update)

BR7000-I/S485: • Additional external input

• Additional message relay

• Serial interface RS485

• Evaluation software BR7000-SOFT incl. in the delivery

BR7000-I B44066R7012E230

BR7000-I/S485 B44066R7112E230

Single-phase measuring




Suitable for dynamic and mixed compensation

Direct triggering of up to 32 thyristor switches seriesTSM-LC-S (version S485) at the bus

Measuring of important grid parameters

Measuring of distortion factor THD-V/THD-I

Display of harmonics up to 33rd

Display of values as bargraph-diagram possible

• Supply voltage: 110 … 230 V AC ±15%, 50/60 Hz

• Measuring voltage: 30 … 440 V AC (L-N)50 … 760 V AC (L-L)

• Measuring current: X:5 A / X:1 A, selectable

• 12 relay outputs

• 12 transistor outputs

• 1 relay output (message/alarm/fan)

• Standard system interface (e.g. for firmware update)

BR7000-I-TH/S485: • Additional external input

• Additional message relay

• Serial interface RS485

• Evaluation software BR7000-SOFT incl. in the delivery

BR7000-I-TH B44066R7412E230

BR7000-I-TH/S485 B44066R7612E230

Connection to RS485 of BR7000, BR7000-I/S485 and BR7000-I-TH/S485

Administration of several PF controllers possible

Comfortable analysis of recorded values

Direct connection to USB port of a PC via USB-adapter

Included in the delivery of BR7000, BR7000-I/S485 and BR7000-I-TH/S485


7© EPCOS AG 2017


Technical data

Series

Features

Technical data

Ordering code

Multi Measuring InterfaceMMI7000

Three-phase measuring and display of numerous parameters: V, I, P, Q, S, cos f, f, W, T, THD-V, THD-I

Display of harmonics as bar chart: harmonic of voltage up to 51st and harmonic of current up to 51st

Oscilloscope mode: for graphic display of a completeoscillation incl. harmonics

Display editor: for free programming of display formeasured values

Scan mode: for rotating display of selected values

Display and recording of minimum and maximum values with time stamp

Panel mounting instrument

Graphical menu (DE/E/ES/RU/TR)

Integrated help function

Display of date and time

• Supply voltage: 110 … 230 V AC ±15%

• Measuring voltage (3-phase):3 · 30 … 440 V AC (L-N)3 ·50 … 760 V AC (L-L)

• Measuring current: X:5 A / X:1 A

• Rated frequency fR: 50/60 Hz

• Power consumption: <5 VA• Sensitivity: 50 mA/10 mA• Illuminated full graphic LCD display,

128 x 64 dots

MMI7000-B (basic version): B44066M7100E230

MMI7000-S (incl. 2 interfaces RS485): B44066M7200E230

MMI7000-E (extended version with RS485 interface,memory card and additional in- and outputs):B44066M7300E230


Single-phase measuring of V, I, P, Q, S, cos f,f, W, T (read out via RS485)

Coupling with PF controller BR7000, BR7000-I/S485 and BR7000-I-TH/S485 via interface for determination of real capacitor current

Capacitor protection by step switch-off at current limit

Fast trigger for dynamic PFC

Independent switching of a single capacitor step

Stand-alone measuring device with interface for read-out

Panel mounting instrument

Recording of maximum values

• Supply voltage: 230 V AC

• Measuring voltage: 230 V AC ±15%

• Measuring current: X:5 A / X:1 A

• Rated frequency fR: 50/60 Hz

• Power consumption: <4 VA• Sensitivity: 40 mA• LCD display 2 x 16 characters; alphanumeric

MMI6000-R (version with relay output):B44066M6000E230

MMI6000-T (version with optocoupler output):B44066M6100E230


8 © EPCOS AG 2017


Technical data

Series

Features

Technical data

Ordering code

Grid Analysis ToolMC7000-3

Measuring, display and storage of numerous parameters

Illuminated full graphic display, 128 x 64 dots

Comfortable programming of recording interval

Display and internal storage of max. values with time stamp

Display of date and time

Large number of display options

Fast and easy evaluation of measured values,with PC software included in the delivery

Automatic calculation of required kvar

Recommendation for design of customized PFC system

• Supply voltage (auxiliary voltage): 110 … 230 V AC

• Measuring voltage (3-phase):3 · 30 … 440 V AC (L-N)3 · 50 … 760 V AC (L-L)

• Power consumption: <5 A

• Large number of accessories included:3 safety measuring cables1 safety measuring line4 safety dolphin clipsWindows-based software on CD-ROM1 memory SD-Card 1 power lead

B44066M7777E230

Ordering code for flexible current clamps (not included in the delivery, but mandatory for operation): please refer to page 11.


Three-phase grid measuring device in panels, e. g.feed-ins (V, I, P, Q, S, cos f, f, W, T, THD-V, THD-I)

Measuring of power and harmonics

For integration into existing networks via interfaceRS485 (MODBUS-RTU)

Compatible with software MMI-energy for storage, display and evaluation of power and energy data

Voltage harmonics up to 39th order

Current harmonics up to 39th order

Additional internal 24-hrs-ring buffer for the 15-min active energy values

Internal storage for cumulated energy values

Ring buffer for daily meter reading active power

System clock for time stamp

System interface RS485 (MODBUS-RTU) for processing of measured values

• Supply voltage: 24 V DC (external via terminal)

• Measuring voltage: 3 · 30 … 440 V~ (L-N), 50/60 Hz (10 … 80 Hz)3 · 50 … 690 V~ (L-L), 50/60 Hz (10…80 Hz)

• Measuring current (3-phase): 3 · X:5 A / X:1 A, selectable

• Power consumption: <5 A

• Sensivity: 50 mA/10 mA

• RS485 system interface

B44066M8003E024


9© EPCOS AG 2017


Technical data

Series Capacitor Contactors Thyristor Modules forJ230/N230 Dynamic PFC

Features

Technical data

Ordering code

J230 series B44066S****J230

N230 series B44066S****N230

TSM-LC-I: B44066T1022E520

TSM-LC*: B44066T****E402

TSM-LC-N1: B44066T3850E402

TSM-LC-S: B44066T1050E402

TSM-LC-N690: B44066T3050E690

TSM-HV200: B44066T0200E690

• Voltage: 400 … 690 V

• Output: 12.5 … 100 kvar

• Auxiliary contacts: included (normally open)

• Mounting: integrated DIN-rail

• Approval: cUL, CCC (up to 75 kvar)

Series J230: with pre-charge resistors

Excellent damping of inrush current

Soft switching of capacitors to increase the life expectancy of PFC systems, contactors and capacitors

Reduced ohmic losses

High safety standards

Reduction of voltage sags and transients

Series N230: without pre-charge resistors

Easy installation: usage similar to a contactor

Ultra-short reaction time, almost no inrush current

Switching time: approx. 5 ms

Permanent self controlling of various parameters:• Voltage• Phase sequence• Capacitor output

Display of:• Operation• Faults• Activation

• Maintenance-free• Long service life• No switching noise

TSM-LC-I for single-phase

• Voltage range:TSM-LC-I: 230 … 525 VTSM-LC*: 380 … 440 VTSM-LC-S: 200 … 440 VTSM-LC-N690: 380 … 690 VTSM-HV: 690 V

• Output range:TSM-LC-I: 10 … 22 kvar,depending on voltageTSM-LC: 10, 25, 50, 100, 200 kvar,depending on the voltageTSM-HV: 200 kvar


10 © EPCOS AG 2017

Data Logger DataLOG SD USB to RS485 Converter RJ45 Adapter Touch Panel VIP-3-TPPF controller PF controller PF controller PF controller BR7000, BR7000-I/S485 BR7000, BR7000-I/S485 BR7000, BR7000-I/S485 BR7000-I/S485and BR7000-I-TH/S485 and BR7000-I-TH/S485 and BR7000-I-TH/S485

Multi Measuring InterfaceMMI6000/MMI7000

Features

Ordering code

B44066R1311E230 B44066R3333E230 B44066R1703E230


Accessories

Usage for PF-controllers, BR7000, BR7000-I/S485and BR7000-I-TH/S485

• Recording of all gridparameters as well asof all relevant parame-ters of a compensationsystem, includingswitching sequences,switching-on time of allsteps and temperature

• Direct connection to the controller interfacevia Ethernet cable ispossible; 0.5 m cable is included

• Recording time up toseveral weeks

• Ready to use with aplastic casing

• Dimensions 66 x 28 x 66 mm

• Recording of measuredvalues on SD-card (included)

• Evaluation of valueswith Windows basedsoftware, included in the delivery

For connection ofBR7000, BR7000-I/S485and BR7000-I-TH/S485with interface RS485 toPC with USB-interface

• Connection of severaldevices at RS485 possible

• For usage of software BR7000-SOFT on PC

3 versions available:• Connection to the

interface terminals of BR7000, BR7000-I/S485 andBR7000-I-TH/S485,MMI6000 or MMI7000via LAN cable

• Simple connection of several devices via the RS485 bus, for example:– Connection of several

BR7000, BR7000-I/S485 or MMI7000 to a PC with BR7000-SOFT software

– Interconnection of severalMMI6000/MMI7000

Suitable for: 1x RJ45 for BR7000, BR7000-I/S485, BR7000-I-TH/S485, MMI7000

Suitable for:2x RJ45 for BR7000, BR7000-I/S485, BR7000-I-TH/S485, MMI7000

Suitable for: 2x RJ45 for MMI6000

Comfortable control device for intelligent coupling of 3 compensa-tion systems. Enablesoperation of compensa-tion systems in parallelfor three coupled feedingtransformers without anyretroactivity. The controldevice „VIP-3-TP“ realizes the coupling with PF-controllersBR7000-I/S485 and atthe same time offers acomfortable visualizationof the measuring values,switching states and ofthe actual system state.

All possibilities of coupling are supported:

• Coupling with 2 coupling switches

• Ring coupling (3 coupling switches)

• Coupling via separatecoupling bus bars (3 coupling switches)

1x RJ45 for BR7000,BR7000-I/S485,BR7000-I-TH/S485,MMI7000:B44066R1611E230

2x RJ45 for BR7000, BR7000-I-TH/S485,MMI7000:B44066R1711E230

2x RJ45 for MMI6000:B44066R1811E230


11© EPCOS AG 2017


UCM-5, MMI-energy EW-22 BD-xxx ESP-24 Flexible current clampsPF controller Thyristor modules Grid analyzing tool BR6000/BR7000 TSM series MC7000-3Multi Measuring InterfaceMMI6000/MMI7000/MMI8003

Features

Ordering code

UCM-5: B44066R1411E230

Accessories

Discharge resistor block EW-22Discharge resistor for all types ofTSM-LC to achieve fastdischarging. At least one pieceper step required.

Current limitation reactor BD-xxx(not suitable for TSM-HV)Protection of thyristor modules inPFC systems without reactorTSM-LC-I: 1x BD-50*)

TSM-LC10: 2x BD-50*) or 2x BD-100

TSM-LC100: 2x BD-200TSM-LC-N: 2x BD-100TSM-LC-S : 2x BD-100

Feed-in module ESP-24Required for voltage supply ofTSM-LC-S (one per 10 switches) for feed-in of power pack 24 V DC

1x Flexible current clamp“Mini-Flex MMI7000-3”

3x Flexible current clamps“Mini-Flex MMI7000-3”

Discharge resistor block EW-22:B44066T0022E400Current limitation reactor BD-xxx:B44066T0***E400Feed-in module ESP24:B44066T0002E400

1x Flexible current clamp:B44066M1301E2303x Flexible current clamps:B44066M1303E230

Recording and evaluation of counter values for processing (via RS485 interface) to PF controllerBR6000/BR7000.Bus compatible S0-impulse module for software MMI-energyand BR6000/BR7000 for conversion of counter impulses(Q+, Q–, P+, P–, synchronic) onRS485 (MODBUS-RTU protocol)Accessory for the processing of counter values in the PF-controller (controlling of reactivepower related to counter impulsesinstead of current transformer)Allows processing of counter values via Windows-software MMI-energy (included in the delivery): cost centre management,visualization and evaluationCross-linking of up to 32 devices(UCM-5, MMI6000, MMI7000) atMODBUSEvaluation software MMI-energyfor PC (Windows-compatible, included in the delivery)• Storage, display and evaluation

of power and energy data on PC• Single user and network solution

available• Graphical and numerical cost

centre evaluation• Supports UCM-5, MMI6000,

MMI7000, MMI8003, BR6000,BR7000 at one bus (up to max. 32 devices possible)

• Zoom function, print function• Parameterization of the device

*) BD-50 production only after ordering


12 © EPCOS AG 2017


Technical data

Series Reactors – Reactors – Antiresonance Harmonic Filter Discharge Reactor

Features

Technical data

Ordering code

B44066D* B44066E9900L001

• Voltage: 400, 440, 690 V

• Frequency: 50 or 60 Hz

• Output: 10 … 100 kvar

• Harmonics (duty cycle = 100%):V3 = 0.5% VRV5 = 6.0% VRV7 = 5.0% VRV11 = 3.5% VRV13 = 3.0% VR

• Effective current: Irms = ß®(I12+l32 ... l132)

• Fundamental current: I1 = 1.06 · IR(50 Hz or 60 Hz current of capacitor)

• Temperature protection: microswitch (NC)

• Detuning factor: 5.67%, 7%, 14%

• Voltage: 230 … 690 V

• Frequency: 50/60 Hz

• Discharge time (t):

230 V:up to 25 kvar <10 sup to 50 kvar <20 sup to 100 kvar <40 s

400 … 525 V:up to 25 kvar <5 sup to 50 kvar <10 sup to 100 kvar <20 s

525 … 690 V:up to 25 kvar <3 sup to 50 kvar <6 sup to 100 kvar <12 s

High harmonic loading capability, very low losses

High linearity to avoid choke tilt, low noise emission

Fast discharge for fast reconnection of capacitors

Reduced losses

Shockproof case for DIN-rail mounting


13© EPCOS AG 2017

Power Quality Solutions:Key Components, Systems and Modules

Technical data

Series Active Harmonic Filter, Systems and ModulesPQSine P-series

Features

Harmonic compensation up to 50th harmonic (selectable)

Flicker compensation

Ultra-fast reactive power compensation (inductive and capacitive)

Active load balancing

Compact design

60 Amps modules or modular systems extendable from 60 to 600 A

Grid resonance detection

Advanced digital control with SDC (Selective Direct Control) algorithm

High performance and reliability

User-friendly menu operation

Simple installation

Technical data

Ordering code

B44066F****N***

Applications

• System input / number of phases: 3-phase / 3-wire; 3-phase / 4-wire

• Input voltage (min. / max.): 3P3W device: 180 V … 528 V, 3P4W device: 180 V … 460 V

• Inverter technology: Three-level NPC topology, IGBT

• Frequency: 50/60 Hz ±3 Hz

• Reaction time: 21 µs (immediate load change reaction)

• Steady state response time: <300 µs (steady state response time to full steady state compensation)

• Switching frequency: 24 kHz

• Control frequency: 48 kHz

• Interface: Ethercat 100 Mbit/s, USB, active sensor bus, display bus, Modbus TCP/IP

• Ambient temperature: –10 … +40 °C full performance, up to +55 °C derating 2%/K

• Protection class: IP20 for module and wall mounted panels, IP33 for floor mounted panels (IP54 for floor mounted panels is optionally available on request)

• Datacenters, UPS systems, Green energy power generation(e. g. photovoltaic and wind turbines),

• Industrial production facilities, office buildings and shopping center


14 © EPCOS AG 2017

Power Quality Solutions:Key Components and Accessories

PQSine P-series – accessories

TFT Color Control/Display Touch Screen Unit1) TFT Color Control/Display Touch Screen Unit1)

(7”/12.1”) in rugged equipment case (7”/12.1”)

Features

Ordering code

For mounting in the panel front

• Protection class: IP65

• LED backlight

• Intensity: 450 cd/m²

• Input: touch screen 4-wire resistive

• For parameter setting, status indication, alarm setting, monitoring, event logging

• Operating system: embedded Linux

• Communication: Ethercat Master, Ethernet TCP/IP

• Interface: USB, 3x opto-insulated input, 2-relay output display bus

• Operating temperature: –20 … + 55 °C

• Firmware update via SD card possible

• Weight: 1 kg (7”); 2 kg (12.1”)

7" TFT color control/display unit, touch screen:B44066F9007N230

12.1" TFT color control/display unit, touch screen:B44066F9012N230

Needed for parameterization of PQSine modules ordered without the 7” / 12.1” TFT color control / display touch screen unit, for instance

For mounting in the panel front

• Protection class: IP65

• LED backlight

• Intensity: 450 cd/m²

• Input: touch screen 4-wire resistive

• For parameter setting, status indication, alarm setting, monitoring, event logging

• Operating system: embedded Linux

• Communication: Ethercat Master, Ethernet TCP/IP

• Interface: USB, 3x opto-insulated input, 2-relay output display bus

• Operating temperature: –20 … + 55 °C

• Firmware update via SD card possible

7" TFT: for parameterization of the PQSine moduleswithout display, including power supply:B44066F9907N230

12.1" TFT: for parameterization of the PQSine moduleswithout display, including power supply:B44066F9912N230

Important information: Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products. We expressly point out that these statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. It is incumbent on the customer to check and decide whether a product is suitable for use in a particular application.This publication is only a brief product survey which may be changed from time to time. Our products are described in detail in our data sheets. The Important notes(www.epcos.com/ImportantNotes) and the product-specific Cautions and warnings must be observed. All relevant information is available through our sales offices.

Display of ordering codes for EPCOS products: The ordering code for one and the same EPCOS product can be represented differently in data sheets, data books, other publications, on the EPCOS website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet underwww.epcos.com/orderingcodes

1) Only needed for modules


15© EPCOS AG 2017

Get in ContactSales Worldwide

EUROPE AustriaTDK Austria GesmbHWienT +43 1 25 63 630 56 39F +43 1 25 63 630 56 [email protected], Greece, MacedoniaTDK Austria GesmbHWienT +43 1 25 63 630 56 30F +43 1 25 63 630 56 [email protected] RepublicTDK Czech s.r.o.Praha T +420 2 33 03 22 81F +420 2 33 03 22 [email protected], EstoniaTDK NORDIC OYEspooT +358 9 54 80 70 00F +358 9 54 80 70 [email protected], Belgium, Luxembourg, MaltaTDK Electronics France SASPantinT +33 1 49 46 67 89F +33 1 49 46 67 [email protected], Liechtenstein,Netherlands, SwitzerlandTDK Europe GmbHMünchenCustomer ServiceT (D) 0180 500 33 48

(0.14 Euro/min.)T (NL) +31 70 33 10 611T (CH) +49 89 54020 2691F +49 89 54020 [email protected] Electronics Hungary Ltd.BudapestT +36 1 436 07 20F +36 1 436 07 [email protected] Italy S.r.lMilanT +39 02 50 99 54 25F +39 02 50 99 54 [email protected], Latvia, LithuaniaTDK Polska Sp. z o.o.WarszawaT +48 22 24 60 409F +48 22 24 60 [email protected] Electronics Spain S.L.U.BarcelonaT +34 93 480 42 94F +34 93 480 42 [email protected] Sales ContactBrasovT +40 724 58 84 [email protected]

Russia, Belarus, Kazakhstan,Moldavia, UkraineTDK CIS LLCMoscowT +7 495 663 21 00F +7 495 663 21 [email protected] Sales ContactDoln y KubinT +421 435 82 36 [email protected] Sales ContactŠkofljicaT +386 59 95 63 [email protected] and Herzegovina, Croatia, Montenegro, Serbia,SloveniaTDK Austria GesmbHWienT +43 1 25 63 630 56 30F +43 1 25 63 630 56 [email protected] Electronics Spain S.L.U.Getafe (Madrid)T +34 91 514 71 62F +34 91 514 70 [email protected], Iceland, Denmark,NorwayTDK NORDIC ABKistaT +46 8 4 77 27 00F +46 8 4 77 27 [email protected] Europe GmbHLiaison Office TurkeyKozyatagi IstanbulT +90 216 5 69 81 00F +90 216 4 64 07 [email protected] Kingdom, IrelandTDK UK LimitedBracknell, BerkshireT +44 13 44 38 15 10F +44 13 44 38 15 [email protected]

ASIAAfghanistan, Iran, Iraq, Jordan,Lebanon, Pakistan, SyriaTDK Europe GmbHLiaison Office TurkeyKozyatagi IstanbulT +90 216 5 69 81 00F +90 216 4 64 07 [email protected] (Shanghai) Ltd.Shanghai T +86 21 22 19 15 00F +86 21 22 19 15 [email protected] EPCOS LimitedHong KongT +852 36 69 82 00F +852 36 69 82 [email protected], Bahrain, Bangladesh,Kuwait, Nepal, Oman, Qatar,Saudi Arabia, Sri Lanka, United Arab EmiratesEPCOS India Private Ltd.Bangalore T +91 80 40 39 06 16F +91 80 40 39 06 [email protected] Sales RepresentativeKibbutz Givat-HashloshaT +972 73 2676 [email protected] CorporationTokyoT +81 3 68 52 71 [email protected] Korea LLCSeoul T +82 2 21 56 68 18F +82 2 21 56 68 [email protected] RDC SDN. BHD.c/o TDK (M) SDN BHDNilaiT +60 6 797 8827F +60 6 797 [email protected]/o TDK Electronics PhilippinesCorporationBinan, LagunaT +63 49 541 31 41 66 30 / 31F +63 49 541 31 [email protected], Indonesia, Thailand, VietnamEPCOS Pte., Ltd.Singapore T +65 68 41 20 11F +65 67 44 69 [email protected] Taiwan Co. Ltd.TaipeiT +886 2 26 55 76 76F +886 2 27 82 03 [email protected]

AMERICASUSA, Canada, MexicoEPCOS Inc.Iselin, NJ T +1 732 9 06 43 00F +1 732 9 06 43 [email protected]

SOUTH AMERICABrasilEPCOS do Brasil Ltda.São Paulo T +55 11 32 89 95 99 Ext. 6851F +55 11 32 89 99 [email protected]

AUSTRALIAAustralia, New ZealandElectronic Component SolutionsPty LtdMelbourneT +61 3 95 66 72 17F +61 3 95 66 72 [email protected]

AFRICAEgyptTDK Europe GmbHLiaison Office TurkeyKozyatagi IstanbulT +90 216 5 69 81 00F +90 216 4 64 07 [email protected], TunisiaTDK Electronics France SASPantinT +33 1 49 46 67 89F +33 1 49 46 67 [email protected]

11/16


© EPCOS AG · A TDK Group CompanyEdition 2017 · Ordering No. EPC:26054-7600 · Printed in Germany · PB 12161.5

Get in ContactDistributors and Sales Contact Worldwide

The addresses of our worldwide distributors and regional sales offices are available at www.epcos.com/sales

© EPCOS AG, Corporate Communications, P.O.Box 80 17 09, 81617 Munich, GermanyReproduction, publication and dissemination of this publication and the information contained therein without EPCOS’ prior express consent is prohibited.

11/16

EUROPE Croatia, SerbiaERG d.o.o.VarazdinT +385 42 35 17 77F +285 42 35 17 [email protected] Republic EL-INSTA ENERGO s.r.o.Hrusovany u BrnaM +420 7 76 74 82 39 T +420 5 47 23 62 70 [email protected] A.E.Amaroussio/AthensT +30 210 68 64 148F +30 210 68 64 562ItalyTrendfin s.r.l.Limena (PD)T +39 049 88 48 011F +39 049 88 48 [email protected] LTDVilniusT +370 5 265 26 89F +370 5 265 08 [email protected] Sp. Z o.o.GdanskT +48 58 554 08 00F +48 58 554 08 [email protected] ELECTRONICS Sp. Z o.o.GdanskT +48 58 554 29 11F +48 58 554 24 [email protected] Plus d.o.o.Novi BeogradT +381 11 22 843 22www.greenplus.co.rsMontprojekt d.o.o.BeogradT +381 11 71 29 [email protected] ELEKTRONIK LTD. STI.IstanbulT +90 216 463 39 01F +90 216 463 39 [email protected] Kingdom, IrelandEuropower Components Ltd.Lincoln (UK)T +44 15 22 51 42 31Alcorn Energy SystemsDown (Northern Ireland)T +44 2844 821197Demesne Electrical Sales LimitedDublin (Ireland)T +353 1 404 7700

ASIABangladeshS.A. Traders & Co.DhakaT +880 2 955 83 40F +880 2 956 57 26 Indonesia PT Industrindo NiagatamaJakarta UtaraT +62 21 65 30 26 58F +62 21 65 30 26 [email protected] Khazen Co.TehranT +98 21 88 88 90 13F +98 21 88 77 20 [email protected] Headquarter / BaghdadT (IQ) +96 47 80 91 75 [email protected] Dubai BranchT (AE) +97 14 33 77 [email protected] Electricity & Electronics Ltd.Tel AvivT +972 37 65 71 00F +972 37 65 71 10MalaysiaAlpha Automation (Selangor) Sdn. Bhd.SelangorT +60 3 55 69 36 98F +60 3 55 69 40 [email protected] Industrial Network, INC Manila T +63 2 563 83 38 to 42 F +63-2 563 25 29 [email protected]@asiaphil.comSaudi ArabiaPowerline Solutions TradingDammam T +966 38 30 36 11 Ext. 106F +966 38 32 40 [email protected] Electric Technologies Pte LtdSingaporeT +65 62 98 85 50F +65 62 99 60 [email protected] LankaK.I.K. Engineering Co. (Pvt) Ltd.Mount LaviniaT +94 11 271 74 13F +94 11 271 50 [email protected] CO.AleppoT +963 21 21 22 234F +963 21 21 22 [email protected] Capacitors Co. Ltd.Samut PrakamT +66 2 336 11 16F +66 2 336 11 [email protected]

United Arab Emirates, QatarGama Electrical CO. LLCSharjahT +971 65 33 54 53F +971 65 33 81 [email protected] Tech Co. LtdHo Chi Minh CityT +84 8 35 15 89 60F +84 8 35 15 89 [email protected]

SOUTH AMERICAArgentinaELECOND CAPACITORES S.ABuenes AiresT +54 11 43 03 12 03F +54 11 43 03 12 [email protected] Mundial S. R. LCharcasT +59 13 33 32 90 91F +59 13 33 32 [email protected] S.A.Santa Cruz de la SierraT +59 13 31 10 011 Ext. 7013F +59 13 31 12 [email protected] ELETROMECANICA LTDAGravataíT +55 51 34 88 25 65F +55 51 34 31 38 [email protected] de JaneiroT +55 21 38 99 35 33F +55 21 38 99 35 [email protected] LTDASão PauloT +55 11 38 33 48 38F +55 11 38 33 48 [email protected] ELETRONICA LTDASão PauloT +55 11 39 76 95 35F +55 11 39 78 21 [email protected] Indústria e ComércioImportação e Exportação LTDASão PauloT +55 11 21 55 55 29F +55 11 21 55 55 [email protected] S. A.Santiago de ChileT +56 2 477 14 85F +562 4 77 10 [email protected] ELÉCTRICASS.A.CallíT +572 3 81 51 81F +572 4 46 44 [email protected] S. A.BogotaT +57 1 4 25 32 90F +57 1 2 94 23 [email protected]

Costa RicaSIEMENS S.ASan JoseT +506 22 87 51 72F +506 22 33 58 [email protected] S.AGuayaquilT +593 2 25 82 60F +593 2 294 39 [email protected] SalvadorSIEMENS S. A.San SalvadorT +503 22 78 02 [email protected] GuatemalaSIEMENS S. A.Ciudad de GuatemalaT +502 2 423 13 72F +502 2 379 23 [email protected]íonT +595 22 49 23 87F +595 21 60 65 [email protected] S. A.LimaF +51 1 421 92 92 [email protected] S.AMontevideoT +598 29 24 70 80 Ext. [email protected] – EUIPOS Y SISTEMASCaracasT +582 1 22 43 64 01F +582 1 22 43 64 [email protected] +582 4 3 55 44 878 Ext. 6F +582 4 3 55 44 [email protected]

AUSTRALIAAustralia, New Zealand Electronic Component SolutionsPty LtdMelbourne (VIC)T +61 3 95 66 72 17F +61 3 95 66 72 [email protected]

AFRICAEgyptEgyelectronics Maadi, HelwanT +202 27 51 51 08F +202 27 51 51 [email protected] of South AfricaElectrocomp (PTY) Ltd.SandtonT +27 11 458 90 00F +27 11 458 90 [email protected]


Date post:	18-Jul-2018
Category:	Documents
Upload:	buituong
View:	228 times
Download:	0 times

Power Factor Correction -...

Documents