Power Plant Codes & Standard

7/27/2019 Power Plant Codes & Standard

1/15

CODE STANDARD

PTC-6 ASME Performance Test Codes for Steam Turbines

IEC:34-1 Specification for rotating electrical machines

IEC:34-3 Specific requirement for turbine-type synchronous machines.

IS:7132 Guide for testing synchronous machines

IEC:34-2 Method for determining losses and efficiency of Rotating electrical machinery from test.

IEC:34-4 Methods of determining synchronous machine quantities from testIEC:34-5 Classification of degree of protection provided by enclosures for rotating machines.

IEC:34-6 Methods of cooling rotating machinery.

IEC:34-8 Terminal marking and direction of rotation for rotating machines.

IS:3003 Specification for carbon brushes of electrical machine.

ASME-TDP1 Prevention of water damage to steam turbines.

IEC:38 IEC standard voltages


2/15

IEC STANDARD DESCRIPTIONIEC 60038 Standard voltages

IEC 60076-2 Power transformers - Temperature rise

IEC 60076-3Power transformers - Insulation levels, dielectric tests and external

clearances in air

IEC 60076-5 Power transformers - Ability to withstand short-circuit

IEC 60076-10 Power transformers - Determination of sound levels

IEC 60146Semiconductor convertors - General requirements and line

commutated convertors

IEC 60255 Electrical relays

IEC 60265-1High-voltage switches - High-voltage switches for rated voltages

above 1 kV and less than 52 kV

IEC 60269-1 Low-voltage fuses - General requirements

IEC 60269-2

Low-voltage fuses - Supplementary requirements for fuses for use

by unskilled persons (fuses mainly for household and similar

applications)

IEC 60282-1 High-voltage fuses - Current-limiting fuses

IEC 60287-1-1Electric cables - Calculation of the current rating - Current rating

equations (100% load factor) and calculation of losses - General

IEC 60364 Electrical installations of buildings

IEC 60364-1 Electrical installations of buildings - Fundamental principles

IEC 60364-4-41Electrical installations of buildings - Protection for safety - Protection

against electric shock


against thermal effects


against overcurrent


against electromagnetic and voltage disrurbance

IEC 60364-5-51Electrical installations of buildings - Selection and erection of

electrical equipment - Common rules


electrical equipment - Wiring systems


electrical equipment - Isolation, switching and control


electrical equipment - Earthing arrangements


electrical equipment - Other equipments

IEC 60364-6-61Electrical installations of buildings - Verification and testing - Initial

verification

IEC 60364-7-701

Electrical installations of buildings - Requirements for special

installations or locations - Locations containing a bath tub or showerbasin

IEC 60364-7-702Electrical installations of buildings - Requirements for special

installations or locations - Swimming pools and other basins


installations or locations - Locations containing sauna heaters

IEC 60364-7-704


installations or locations - Construction and demolition site

installations


3/15

IEC 60364-7-705


installations or locations - Electrical installations of agricultural and

horticultural premises


installations or locations - Restrictive conducting locations

IEC 60364-7-707


installations or locations - Earthing requirements for the installationof data processing equipment

IEC 60364-7-708


installations or locations - Electrical installations in caravan parks

and caravans


installations or locations - Marinas and pleasure craft


installations or locations - Medical locations


installations or locations - Exhibitions, shows and stands

IEC 60364-7-712


installations or locations - Solar photovoltaic (PV) power supplysystems


installations or locations - Furniture


installations or locations - External lighting installations


installations or locations - Extra-low-voltage lighting installations


installations or locations - Mobile or transportable units

IEC 60364-7-740


installations or locations - Temporary electrical installations for

structures,amusement devices and booths at fairgrounds,

amusement parks and circuses

IEC 60427 High-voltage alternating current circuit-breakers

IEC 60439-1Low-voltage switchgear and controlgear assemblies - Type-tested

and partially type-tested assemblies

IEC 60439-2Low-voltage switchgear and controlgear assemblies - Particular

requirements for busbar trunking systems (busways)

IEC 60439-3

Low-voltage switchgear and controlgear assemblies - Particular

requirements for low-voltage switchgear and controlgear

assemblies intended to be installed in places where unskilled

persons have access for their use - Distribution boards

IEC 60439-4Low-voltage switchgear and controlgear assemblies - Particular

requirements for assemblies for construction sites (ACS)

IEC 60446Basic and safety principles for man-machine interface, marking and

identification - Identification of conductors by colours or numerals

IEC 60439-5

Low-voltage switchgear and controlgear assemblies - Particular

requirements for assemblies intended to be installed outdoors in

public places

IEC 60479-1 Effects of current on human beings and livestock - General aspects


4/15

IEC 60479-2 Effects of current on human beings and livestock - Special aspects

IEC 60479-3 Effects of current on human beings and livestock - Effects of currents

passing through the body of livestock

IEC 60529 Degrees of protection provided by enclosures (IP code)

IEC 60644Spcification for high-voltage fuse-links for motor circuit

applications

IEC 60664 Insulation coordination for equipment within low-voltage systems

IEC 60715

Dimensions of low-voltage switchgear and controlgear.

Standardized mounting on rails for mechanical support of electrical

devices in switchgear and controlgear installations.

IEC 60724Short-circuit temperature limits of electric cables with rated voltages

of 1 kV (Um = 1.2 kV) and 3 kV (Um = 3.6 kV)

IEC 60755General requirements for residual current operated protective

devices

IEC 60787Application guide for the selection of fuse-links of high-voltage

fuses for transformer circuit application

IEC 60831Shunt power capacitors of the self-healing type for AC systemshaving a rated voltage up to and including 1000 V - General -

Performance, testing and rating - Safety requirements - Guide for

installation and operation

IEC 60947-1 Low-voltage switchgear and controlgear - General rules

IEC 60947-2 Low-voltage switchgear and controlgear - Circuit-breakers

IEC 60947-3Low-voltage switchgear and controlgear - Switches, disconnectors,

switch-disconnectors and fuse-combination units

IEC 60947-4-1Low-voltage switchgear and controlgear - Contactors and motor-

starters - Electromechanical contactors and motor-starters

IEC 60947-6-1Low-voltage switchgear and controlgear - Multiple function

equipment - Automatic transfer switching equipment

IEC 61000 Electromagnetic compatibility (EMC)

IEC 61140Protection against electric shocks - common aspects for installation

and equipment

IEC 61557-1

Electrical safety in low-voltage distribution systems up to 1000 V AC

and 1500 V DC - Equipment for testing, measuring or monitoring of

protective measures - General requirements

IEC 61557-8


and 1500 V DC - Equipment for testing, measuring or monitoring of

protective measures

IEC 61557-9


and 1500 V DC - Equipment for insulation fault location in IT

systems

IEC 61557-12

Electrical safety in low-voltage distribution systems up to 1000 V ACand 1500 V DC - Equipment for testing, measuring or monitoring of

protective measures. Performance measuring and monitoring

devices (PMD)

IEC 61558-2-6

Safety of power transformers, power supply units and similar -

Particular requirements for safety isolating transformers for general

use

IEC 62271-1Common specifications for high-voltage switchgear and controlgear

standards


5/15

IEC 62271-100High-voltage switchgear and controlgear - High-voltage alternating-

current circuit-breakers

IEC 62271-102High-voltage switchgear and controlgear - Alternating current

disconnectors and earthing switches

IEC 62271-105High-voltage switchgear and controlgear - Alternating current switch-

fuse combinations

IEC 62271-200High-voltage switchgear and controlgear - Alternating current metal-enclosed switchgear and controlgear for rated voltages above 1 kV

and up to and including 52 kV

IEC 62271-202 High-voltage/low voltage prefabricated substations


6/15

S.NO IEC STANDARD

1 IEC 60027

2 IEC 60038

3 IEC 60050

4 IEC 60071

5 IEC 60073

6 IEC 60085

7 IEC 60270

8 IEC 60309

9 IEC 60317

10 IEC 60417

11 IEC 60617

12 IEC 60446

13 IEC 60479

14 IEC 60529

15 IEC 61892

16 IEC 60664

17 IEC 60721

18 IEC 61286

19 IEC 61326

20 IEC 61355

21 IEC 61364

22 IEC 61588

23 IEC 61968

24 IEC 61970


7/15

25 IEC 62262

26 IEC 62270

27 IEC 60079

28 IEC 60092

29 IEC 60335

30 IEC 60364

31 IEC 62325

32 IEC 60034

33 IEC 60308

34 IEC 60545

35 IEC 60805

36 IEC 60994

37 IEC 61400

38 IEC 60076

39 IEC 60214

40 IEC 60296

41 IEC 60726

42 IEC 61378

43 IEC 61558

44 IEC 62041

45 IEC 60044

46 IEC 60269


8/15

47 IEC 60298

48 IEC 60439

49 IEC 60694

50 IEC 60715

51 IEC 60898

52 IEC 60947

53 IEC 61439

54 IEC 61992

55 IEC 62271

56 IEC 60265

57 IEC 60282

58 IEC 60427

59 IEC 60644

60 IEC 60099

61 IEC 60137

62 IEC 60233

63 IEC 60815

64 IEC 61334

65 IEC 61643

66 IEC 61850

67 IEC 62305

68 IEC 60086

69 IEC 62040

Surge


9/15

70 IEC 60146

71 IEC 61642

72 IEC 61800

73 IEC 61803

74 IEC 60183

75 IEC 60228

76 IEC 60245

77 IEC 60287

78 IEC 60724

79 IEC 60331

80 IEC 60502

81 IEC 60728

82 IEC 60874

83 IEC 61156

84 IEC 61158

85 IEC 61238

86 IEC 61280

87 IEC 61537

88 IEC 61784

89 IEC 60793

90 IEC 60255

91 IEC 60812

92 IEC 61025


10/15

93 IEC 62351

95 IEC 60598

96 IEC 60921

97 IEC 60929

98 IEC 61347

99 IEC 61009

100 IEC 60906

101 IEC 60884

102 IEC 61058

103 IEC 62301

104 IEC 61345

105 IEC 61646

106 IEC 61215

107 IEC 61701

108 IEC 61724

109 IEC 61727

110 IEC 61730

111 IEC 61829

112 IEC 62108

113 IEC 61277


11/15

DESCRIPTION

Letter symbols to be used in electrical technology

IEC Standard Voltages

International Electrotechnical Vocabulary

Insulation Co-ordination

Basic Safety principles for man-machine interface, marking and identification

Electrical insulation

High-Voltage Test Techniques Partial Discharge Measurements

Plugs, socket-outlets and couplers for industrial purposes

Specifications for particular types of winding wires

Graphical symbols for use on equipment

Graphical symbols for diagrams

Wiring colours

Effects of current on human beings and livestock

Degrees of protection provided by enclosures (IP Code)

Mobile and fixed offshore units, electrical installations

Insulation coordination for equipment within low-voltage systems

Classification of environmental conditions

Character set with electrotechnical symbols

Electrical equipment for measurement, control and laboratory use EMC requirements

Classification and designation of documents for plants, systems and equipment

Nomenclature for hydroelectric powerplant machinery

Precision clock synchronization protocol for networked measurement and control systems (GPS)

Application integration at electric utilities System interfaces for distribution management

Application integration at electric utilities Energy management system application program

interface (EMS-API)

General


12/15

Degrees of protection provided by enclosures for electrical equipment against external mechanical

impacts (IK code)

Hydroelectric power plant automation Guide for computer-based control

Parts 114 Electrical Installations in Hazardous Areas

Electrical installations on ships

Safety of electrical household appliances

Electrical installations of buildings

Standards related to energy market models & communications

Rotating electrical machinery

Hydraulic turbines - Testing of control systems

Guide for commissioning, operation and maintenance of hydraulic turbines

Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines

operating as pumpsGuide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage

pumps and pump-turbines)

Wind turbines

Power transformers

On-load tap changers

Mineral Insulating oils for transformers & switchgear

Dry type power transformers

Converter Transformers

Safety of power transformers, power supplies, reactors and similar products

EMC requirements for power transformers, power supplies, reactors and similar products

Instrument transformers

Low voltage fuses

Rotation Machines

Transformers

Instrument Transformers

Switchgears / Fuses


13/15

high voltage switchgear in metallic enclosure

Low voltage switchgear and controlgear assemblies

Common Specifications For High-Voltage Switchgear and Controlgear Standards

Dimensions of low-voltage switchgear and controlgear. Standardised mounting on rails formechanical support of electrical devices in switchgear and controlgear installations.

Electrical accessories. Circuit breakers for overcurrent protection for household and similar

installations.

Standards for low-voltage switchgear and controlgear

Low-Voltage switchgear and controlgear assemblies

Railway applications - Fixed installations - DC switchgear

Standards for high-voltage switchgear and controlgear

High-voltage switches

High-voltage fuses

High-voltage alternating current circuit-breakers

Spcification for high-voltage fuse-links for motor circuit applications

Surge arresters

Bushings for alternating voltages above 1000V

Tests on Hollow Insulators for use in Electrical Equipment

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions

Distribution automation using distribution line carrier systems - a standard for low-speed reliable

power line communications by electricity meters, water meters and SCADA.

Surge protective devices connected to low-voltage power distribution systems

Communication Networks and Systems in Substations

Protection Against Lightning

Primary batteries

Uninterruptible power systems

arrestor / Bushings / Insulators & Switchyard regarding

UPS / Batteries

VFD / Converters / Excitation


14/15

Semiconductor Converters

Industrial a.c. Networks Affected by Harmonics Application of Filters and Shunt Capacitors

Adjustable speed electrical power drive systems

Determination of power losses in high-voltage direct current (HVDC) converter stations

Guide to the selection of high voltage cables

Conductors of insulated cables

Rubber-Insulated Cables

Calculation of permissible current in cables at steady state rating

Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1.2 kV) and 3

kV (Um = 3.6 kV)

Tests for Electric Cables under Fire Conditions

Power cables with extruded insulation and their accessories for rated voltages from 1KV up to

30KV

Cable networks for television signals, sound signals and interactive services

Connectors for optical fibres

Multicore and symmetrical pair/qud cables for digital communications

Industrial communication networks Fieldbus specifications

Compression and mechanical connectors for power cables for rated voltages up to 30 kV

Field testing method for measuring single mode fibre optic cable

Cable management Cable tray systems and cable ladder systems

Industrial communication networks Profiles

Optical fibres

Electrical Relays

International Standard on Fault Mode and Effects Analysis

Fault tree analysis

Cables

Relays

Power system / Electrical Protection


15/15

Power System Control and Associated Communications Data and Communication Security

Luminaires

Ballasts for tubular fluorescent lamps Performance requirements

AC-supplied electronic ballasts for tubular fluorescent lamps Performance requirements

Lamp Controlgear

Residual current operated circuit breakers with integral overcurrent protection for household and

similar uses (RCBO's)

IEC system of plugs and socket-outlets for household and similar purposes

Plugs and socket-outlets for household and similar purposes

Switches for Appliances

Household electrical appliances Measurement of standby power

UV test for photovoltaic (PV) modules

Thin-film terrestrial photovoltaic (PV) modules Design qualification and type approval

Crystalline silicon terrestrial photovoltaic (PV) modules Design qualification and type approval

Salt mist corrosion testing of photovoltaic (PV) modules

Photovoltaic system performance monitoring Guidelines for measurement

Photovoltaic (PV) systems Characteristics of the utility interface

Photovoltaic modules

Crystalline silicon photovoltaic (PV) array On-site measurement of I-V characteristics

Concentrator photovoltaic (CPV) modules and assemblies Design qualification and type

approval

Terrestrial photovoltaic (PV) power generating systems General and guide

Solar cells

Lighting

Hosehold

Date post:	02-Apr-2018
Category:	Documents
Upload:	mithun46
View:	225 times
Download:	0 times

Power Plant Codes & Standard

Documents