1
Pressure Vessels & Piping Division Newsletter Spring 2013
The American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016‐5990
expansion. For an example, one can look
at our annual PVP Conferences.
Our PVP Conferences have long been rec‐
ognized as outstanding international fo‐
rums for the exchange of knowledge and
information in the pressure technologies
disciplines. At the upcoming 2013 PVP
Conference in Paris, France, we will wel‐
come attendees from at least 46 different
countries representing all regions of the
globe. Such an exceptional global gather‐
ing of the engineering community pro‐
vides an excellent opportunity for potential
new members to experience our Confer‐
ence and get to know what the PVPD has
to offer. This extensive international repre‐
sentation also provides us with opportuni‐
ties to gain further knowledge and under‐
standing of regional topics on which future
conferences could focus and other ways in
which our PVPD can provide service to the
engineering community. As has always
been the case, the continued success of the
PVPD directly depends on the commit‐
ment, dedication, and active participation
of our members. As our membership con‐
tinues to grow and become even more in‐
ternational, so will our opportunities to
serve the engineering community.
I encourage you to read all the reports in
this newsletter to get the broadest sense of
all that is happening within our very active
division. Preparations for the 2013 PVP
(Continued on page 2)
SME’s March, 2013
membership report
shows our Pressure Ves‐
sels & Piping Division
(PVPD) ranks as the sixth
largest of the 32 technical
divisions within the soci‐
ety. During the nine months thus far into
this membership year, we have added 819
new members — this growth places us
second in the number of new members
added. We warmly welcome these new
members into our PVPD family and en‐
courage them to actively participate in Di‐
vision activities because it is the commit‐
ment and dedication of all our members
that keeps our division strong and enables
us to plan and execute events such as our
annual PVP Conferences.
At the recent Leadership Training Confer‐
ence, ASME Executive Director, Mr. Tom
Loughlin, discussed the Society’s plans for
global outreach and membership growth
— details can be found at http: //
strategy.asme.org/home.cfm. These plans
include significantly increasing global
membership. Since the PVPD includes a
significant percentage of members from
outside the USA, our division is in an excel‐
lent position to potentially play an impor‐
tant role in helping ASME achieve the Soci‐
ety’s goals in international membership
NON‐PROFIT ORG
U.S. POSTAGE
P A I D American Society
of
Mechanical
Engineers
M. B. Ruggles‐Wrenn, Editor
ur upcoming 2013 PVP Conference
in Paris, France will be spanning
five, very busy days from July 14–18. Situ‐
ated in downtown Paris, the four‐star Paris
Marriott Rive Gauche Hotel & Conference
Center will be the center of our many Con‐
ference activities. The Conference is spon‐
sored by the ASME Pressure Vessels &
Piping (PVP) Division with additional par‐
ticipation by the ASME Nondestructive
Examination (NDE) Division. The theme
of the 2013 PVP Conference is The Interna‐
tional Scene of Pressure Vessels & Piping.
Authors from 46 international countries
will be presenting papers in Paris, and the
2013 PVP Conference is expected to have
approximately 190 technical and panel
discussion sessions, two workshops, three
technical tutorials, two special tutorials,
and our outstanding Rudy Scavuzzo Stu‐
dent Paper Symposium and 21st Annual
PVPD Student Paper Competition. Our
traditional NDE and Software Demonstra‐
(Continued on page 2)
O
A
Ronald S. Hafner Michael E. Nitzel
A Message from the
Conference Co‐Chairs
Michael E. Nitzel
A Message from the
PVP Division Chair
2
Conference Co‐Chairs Message (Continued from page 1)
Division Chair Message (Continued from page 1)
Conference in Paris are rapidly being com‐
pleted and all indications are for another
outstanding event. My congratulations
and thanks go out to all the authors and
organizers for their hard work and com‐
mitment. Thanks also go out to the Con‐
ference sponsors — their contributions to
our success are very much appreciated.
Most importantly, I look forward to greet‐
ing the “PVP family” when we meet again
in Paris — see you there!
Mike Nitzel
Chair, PVP Division
mittees will also meet during the lunch
breaks on Monday and Tuesday. Confer‐
ence attendees are encouraged to attend
one or more of these Technical Committee
meetings and become active members in
these outstanding groups.
A key component of every PVP Conference
is the opportunity to socialize with old
friends and make new friends, and our
Conference in Paris offers several great
possibilities. The Conference‐Wide Recep‐
tion on Monday evening presents an excel‐
lent opportunity for meeting and interact‐
ing with all the attendees and their guests.
Two separate daytime tours have been ar‐
ranged for families and guests. On Mon‐
day, we will have the Paris City Tour.
Driving by all the famous spots of Paris,
you will get into the heart of the secrets of
the city: The Sun King, the French revolu‐
tion, Napoleon Bonaparte, many important
people and famous events have made Paris
the beautiful city it is now. During the
tour, two stops will be arranged for taking
pictures and stretching legs — the Tro‐
cadéro, facing the Eiffel Tower, and Notre‐
Dame, where a coffee break will be offered.
Among Parisian famous spots, you will
also discover the bustling Opera Square,
the spectacular Concorde Square, with its
famous obelisk, the Invalides, and the
Champs Elysee, with the famous Arc de
Triomphe.
On Tuesday, we will be offering a tour
through the Orsay Museum. The Gare
d’Orsay was inaugurated on the 14th of
July, in 1900, as a train station, for the Paris
World Exposition, and was considered a
masterpiece of industrial architecture at the
time. But soon the platforms had become
too short for the now much longer trains,
and, as early as 1939, the Gare d’Orsay was
out of use as a train station.
The train station had been completely
abandoned since 1961 when it was saved
from demolition by then French President
Pompidou. In 1978 French President Gis‐
card d’Estaing decided to use the gare in‐
side the museum d’Orsay as a museum for
19th and 20th century art. In November
1986, the museum was inaugurated by then
French president, François Mitterrand.
tion Forums are also included in the Con‐
ference schedule. Don’t miss out on any
of these perennial attractions.
PVP Conferences have had a long tradi‐
tion for providing an excellent venue for
exchanging state‐of‐the‐art technical infor‐
mation, and, over the years, they have
provided many social and networking
activities. The Conference will begin on
Sunday, July 14th, with the opening of on‐
site registration, both workshop sessions,
and the first of our two Special Tutorials.
Technical paper sessions begin on Mon‐
day morning. We are fortunate that
ASME President, Marc W. Goldsmith, and
incoming ASME President, Madiha M.
Kotb, will both be in attendance in Paris.
Each will provide opening remarks at the
Plenary Session. Presentations by Ms.
Anne Chaudouet, Senior Consulting Engi‐
neer at the Technical Centre for the Me‐
chanical Industry, and by Mr. Richard
Barnes, Principal Engineer of ANRIC En‐
terprises, Inc., will complete an interesting
and informative Plenary Session. In addi‐
tion to the numerous technical paper ses‐
sions, the popular NDE Demonstration
Forum and Software Forum will be pre‐
sented on Monday and Tuesday, respec‐
tively. Three technical tutorials will also
be presented during the Conference— one
each on Monday, Tuesday, and Wednes‐
day. The PVP Division Technical Com‐
The museum contains 2,300 paintings,
1,500 sculptures and more than 1,000 other
objects. It covers a period from mid 19th
century through the mid 20th centuries,
and contains works from Monet, Manet,
Renoir, Cezanne, Van Gogh, and others.
The Conference website address is http://
www.asmeconferences.org/PVP2013/. The
website is continually being updated as the
Conference plans progress. Please visit the
website to complete your Conference regis‐
tration, to make hotel reservations, to view
preliminary program information, and to
obtain the latest new information.
Our final note is to offer our sincere thanks
to all of you who have provided your tre‐
mendous dedication, commitment, and
countless hours in the preparation for this
Conference. Likewise, our thanks go out to
all of the Conference sponsors. Our spon‐
sors’ support is a much appreciated com‐
ponent in assuring the continued success of
our Conference.
Please join us for a great Conference in the
beautiful international setting that is Paris!
We look forward to seeing you there!
Michael E. Nitzel
2013 PVP Conference Co‐Chair
Ronald S. Hafner
2013 PVP Conference Co‐Chair
To subscribe to Journal of Pressure Vessel Technology, please contact:
E‐mail: [email protected], Phone: 1‐800‐843‐2763 or 1‐973‐882‐1170, Fax : 1‐973‐882‐1717
he main role of the
PVP Senate is to
support the Executive
Committee (EC) of the
PVP Division. One of the
major Senate functions is
to organize the Student
Paper Competitions and Symposium at
every annual PVP Conference. As a result,
the Rudy Scavuzzo Student Paper Sympo‐
sium and 21st Annual PVPD Student Paper
Competition are being prepared for the
2013 PVP Conference to be held in Paris,
France. In response to the Call‐for‐Papers,
68 abstracts were submitted to the Student
(Continued on page 3)
A Message from the
PVP Division Senate
T
Young W. Kwon
3
reparations for the
2013 ASME Pres‐
sure Vessels & Piping
Conference are almost
complete. The Conference
will be held in Paris,
France, at the Marriott
Rive Gauche Hotel, July 14–18, 2013. The
PVP Conference Co‐Chairs are Michael
Nitzel from M. E. Nitzel Engineering Ser‐
vices, and Ron Hafner from Lawrence Liv‐
ermore National Laboratory. The Techni‐
cal Program Chair for the Conference is
Daniel T. Peters. Approximately 190 paper
and panel sessions are planned, as well as
Tutorials, the NDE and Software Demon‐
stration Forums, and the Student Paper
Symposium & Competition.
The 2014 ASME Pressure Vessels & Piping
Conference is currently being planned for
Anaheim, California, USA at the Hyatt
Regency Orange County Hotel. The Con‐
ference dates will be July 20–24, 2014. The
PVP 2014 Conference Chair will be Daniel
T. Peters, and the PVP‐2014 Technical Pro‐
gram Chair will be Marina Ruggles‐Wrenn.
The Short‐Form Call for Papers has been
issued, and is presented on Page 12 of this
Newsletter. The Long‐Form Call for Papers
is still being prepared, and will soon be
available on the PVP Website at http://
www.asmeconferences.org/PVP2014.
Daniel T. Peters
Chair, PVPD Programs
oluntary contribu‐
tions to the Soci‐
ety, the PVP Division, and
the pressure vessels and
piping industry are recog‐
nized through a number
of ASME Society and Di‐
vision honors and awards.
Historically, the Honors & Awards Lunch‐
eon, held during the annual ASME Pres‐
sure Vessels & Piping Conference, is an
opportunity to recognize prominent mem‐
bers of the Division.
The ASME S. Y. Zamrik Pressure Vessels &
Piping Medal for 2012 was presented to Dr.
M. K. Au‐Yang. Dr. Au‐Yang is one of the
Paper Sessions. Among them, 45 draft pa‐
pers were submitted on or before the dead‐
line. To be eligible for competition each
paper submission must meet the deadlines.
The qualified papers represented 14 coun‐
tries from all over the world including
Asia, Europe, North and South Americas.
About one third of the total draft papers,
i.e. 16 papers, have been submitted to the
BS/MS category while the remaining pa‐
pers, i.e. 29 papers, have been applied to
the PhD category. We plan to invite eight
Finalists from BS/MS and PhD categories
each, for a total of 16 Finalists. Addition‐
ally, 16 Honorable Mentions will be in‐
vited. Because the number of PhD level
papers is much greater than that of the BS/
MS level papers, 12 Honorable Mentions
are likely to be selected from the PhD level
candidates while four Honorable Mentions
will be selected from the BS/MS level appli‐
cants. The Senate members contribute to
the selection process through their reviews
of the student papers as well as evaluations
of the students’ presentations.
I look forward to seeing you at the Student
Paper Competition and Symposium in
Paris!
Young W. Kwon
PVP Division Senate President
Message from Senate President (Continued from page 2)
Recognition were also presented to Honor‐
able Mentions, Finalists and Winners of the
Rudy Scavuzzo Student Paper Symposium
and 20th Annual Student Paper Competi‐
tion. Conference awards were presented to
the developers of the Outstanding Techni‐
cal Session and Outstanding International
Technical Session of the 2011 PVP Confer‐
ence. The ASME Journal of Pressure Vessel
Technology G.E.O. Widera Literature
Award and Editor’s Choice Award for 2011
were also presented.
Douglas A. Scarth
Chair, PVPD Honors and Awards Committee
most internationally renowned engineers
in the field of flow‐induced vibrations. Dr.
Au‐Yang spent the vast majority of his
professional career with various divisions
of the Babcock & Wilcox Company and
Framatome Technologies advancing the
state of the art in flow‐induced vibrations.
Dr. Au‐Yang served as the PVP Division
Fluid‐Structures Interaction Technical
Committee Chair, the Honors & Awards
Committee Chair, and the PVP Division
Chair. Dr. Au‐Yang also served as an As‐
sociate Editor of the ASME Journal of Pres‐
sure Vessel Technology. Through Dr. Au‐
Yang’s contributions, the nuclear power
industry has benefited from his publica‐
tions and direct leadership on numerous
international panels and committees. Dr.
Au‐Yang has also contributed significantly
to various ASME Codes dealing with flow‐
induced vibration analysis and with heat
exchanger testing.
ASME Dedicated Service Awards were
presented at the 2012 PVP Conference to
Poh‐Sang Lam and Ronald Hafner.
Ronald Hafner, outgoing Chair of the PVP
Division for 2011−2012, was also presented
the ASME Board of Governors Award.
The PVP Division was pleased to recognize
Gregory Anderson, Denis Demichael, Nar‐
endra Gupta, Jan Keltjens, Robert
McLaughlin, Peter Molvie, Clay Rodery,
Susumu Terada and Xian‐Kui Zhu as new
ASME Fellows. The PVP Division con‐
gratulates all of these outstanding mem‐
bers in their elevation to ASME Fellow
grade membership.
The S. S. Chen PVP Outstanding Service
Award was presented to Dr. William
Koves for his dedication and exemplary
service to the Division. Certificates of Ap‐
preciation were presented to individuals
for services including the PVP Senate
President, outgoing Technical Committee
Chairs, Plenary Speakers at the 2012 PVP
Conference, presenting a tutorial or work‐
shop at the 2012 PVP Conference, and au‐
thoring an Outstanding Technical Paper.
Certificates of Appreciation were also pre‐
sented to out‐going Associate Editors of
the ASME Journal of Pressure Vessel Tech‐
nology. Certificates of Recognition were
presented to individuals for their role as
Technical Program Representative for the
2012 PVP Conference and for services to
the Technical Committees. Certificates of
Awards Presented at
PVP‐2012 Conference
in Toronto, ON, Canada
V
Doug Scarth
PVPD Programs Report
P
Daniel T. Peters
4
s I have taken over
the editorship of
the Journal of Pres‐
sure Vessel Technology
(JPVT) in January, I would
like to express my sincere
gratitude to Prof. Widera
for his excellent leadership and dedication
to the JPVT during the past years. During
his tenure as editor, the JPVT has grown
steadily with the publication of the journal
increasing to six issues per year with a total
of 900 publication pages.
There has also been cooperation with the
editor of the Applied Mechanics Review
(AMR) Transactions ASME. One of the fu‐
ture issues of AMR will be dedicated to‐
ward the Pressure Vessel Technology
(PVT). I am also planning a special issue
this year on the topic of Fluid‐Structure
Interaction in honor of the late Dr. Frank
Eisinger (Guest Editor: Njuki Mureithi).
Two special issues were published last
year: the February 2012 issue for Codes and
Standards (Guest Editor: Doug Scarth) and
the June 2012 issue for the 2011 Gun Tube
Conference (Guest Editor: Mordecai Perl).
There are two outgoing Associate Editors
(Continued on page 5)
he PVPD is com‐
mitted to the de‐
velopment of the engineer‐
ing profession in general
and in the pressure vessel
and piping area in particu‐
lar. As part of this continu‐
ing commitment, the division is arranging
two workshops, two special tutorials and
three technical tutorials for the PVP 2013
Conference. Attendees of the technical tuto‐
rials receive an attendance certificate.
The Microwave NDE Techniques for Rub‐
ber Expansion Joints and HDPE Butt Fu‐
sions in Power Plants workshop provides
an overview of the theory and operation of
the technique. This NDE technique is cur‐
rently in use on these materials in indus‐
tries worldwide. The lead presenter is Bob
Stakenborghs, the general manager of Evi‐
sive, Inc.
The NDT Workshop is arranged by the
European Federation for Non Destructive
Testing. Members of ECEC, ICNDT WG1
and ICEC are also contributing. This work‐
shop covers the EFNDT/ICNDT strategy on
certification. It covers an overview of sec‐
ond party qualification, and a comparison
with key criteria for third party qualifica‐
tion and certification. It covers the certifica‐
tion of personnel and assessment of certifi‐
cation bodies. The leader of this workshop
is John Thompson, Consulting Engineer,
Director, Multiple Support Systems Ltd.
The first special tutorial, titled
“Perspectives on Engineering Career Path
Development – What It Takes and Where It
Leads,” will be conducted in a panel dis‐
cussion format. Panelists will describe de‐
velopment paths that engineers take in
their professional life. Characteristics of
different career paths, expectations, respon‐
sibilities, tools needed as well as the mental
disposition generally useful for success will
be discussed, and the skills which can be
developed over the course of an engineer‐
ing career will be highlighted. The panel
will be led by Ike Ezekoye, Westinghouse
Electric Company with panelists, drawn
from the USA, Belgium, and Japan.
The second special tutorial covers the bene‐
France and USA.
The third technical tutorial is titled
“Computational Weld Modeling”. This
tutorial provides an overview, with exam‐
ples of the methods used to computation‐
ally model the weld process and experi‐
mentally measure the residual stress. The
engineering analysts will learn simple fun‐
damentals on how to calculate weld resid‐
ual stresses (WRS) and weld distortions,
and include them in life assessments and
techniques that can be used to manage
weld distortions. Project managers can
learn how control of WRS can greatly re‐
duce fabrication costs and improve service
performance, leading to fewer service prob‐
lems. This tutorial is lead by Dr. David
Rudland (US NRC), with a group of pio‐
neers and specialists in computational weld
modeling.
Maher Y. A. Younan
Chair, PVPD Professional Development
fits of participation in ASME Codes &
Standards development activities. This
tutorial covers the overall process used in
development of ASME Codes & Standards,
and specifically those in the area of Pres‐
sure Technology Codes & Standards. It
discusses the various types, and benefits of
participation in the Codes & Standards
Committees, qualifications, and the expec‐
tations of the participants. Mahendra Rana
of BPTCS and Bill Bees are the leaders of
this tutorial.
The first technical tutorial, Bolted Joint
Design, Analysis, and Code Compliance,
provides the design engineer with the nec‐
essary background for the design, analysis,
assembly, and ASME Code compliance of
Bolted Joint Systems. The first half of the
tutorial reviews and examines the basic
principles of bolted joint systems used in
structural, mechanical, or pressure bound‐
ary applications. This part emphasizes a
systems approach to the design, analysis,
and assembly of bolted joint systems. The
second half of the tutorial examines how
pressure boundary bolted joints are ad‐
dressed in ASME codes. Particular empha‐
sis is placed on the new guidance and cal‐
culations provided in ASME PCC‐1‐2010
and the upcoming changes in ASME PCC‐
1‐2013. Sayed A. Nassar, the Founding
Director, Fastening and Joining Research
Institute (FAJRI), Oakland University, and
Warren Brown, Managing Director of In‐
tegrity Engineering Solutions are the lead
developers and presenters of this tutorial.
The second technical tutorial is titled
“Application of Fitness‐for‐Service Codes
to Nuclear Installations”. The evaluation of
the fitness for service of structural compo‐
nents is a key aspect for developing safety
justifications for continued operation in
many industries concerned with pressur‐
ised piping and vessels, and in particular
for safety in nuclear power plants. This
tutorial focuses on the application of three
procedures commonly used in the nuclear
industry to evaluate structural integrity of
piping and vessels containing crack‐like
flaws. These are: RSEM/RCCMR Fitness
for Service Code / France, ASME Boiler
and Pressure Vessel Code, Section XI /
USA, and R6 Rev.4 Fitness for Service pro‐
cedure / UK. Bostjan Bezensek, Hunting
Energy Services Ltd. is the leader for this
tutorial with lead experts from the UK,
PVPD Professional
Development Report
Maher Younan
T
Journal of Pressure
Vessel Technology
A
Young W. Kwon
5
he PVP technical
division serves
engineers from around
the globe. This is rooted
in the nature of our
business with compa‐
nies operating world‐
wide. It shows in the
statistics of the participants at our annual
Conference. We also recognize it in the
LinkedIn forum online of international
discussions, job offers, and event promo‐
tions. PVP serves the global community
by providing information, by developing,
maintaining, and improving standards,
and by keeping people informed about the
latest developments in the industry.
(Continued on page 6)
this year: S. Chattopadhyay representing
Codes & Standards and S. Mokhatab repre‐
senting Pipeline. Their services and contri‐
butions to JPVT are greatly appreciated.
Those AE positions will be replaced
shortly.
Over time, more and more PVP Conference
papers have been submitted to JPVT. For
example, during the Calendar Year 2012,
approximately 30 percent of the total sub‐
mitted papers were previous Conference
papers. Maintaining high standards for the
PVP Conference papers is considered as
one of the contributing factors for the in‐
crease of the submitted Conference papers.
Please feel free to contact me for any sug‐
gestions to further improve the quality and
widest possible dissemination of JPVT.
Young W. Kwon
Journal Editor
JPVT (Continued from page 4)
VPD membership
remained solid
over the past year as 4,364
members are now associ‐
ated with our Division.
These numbers relate to
the PRIMARY Technical
Interest of members in the ASME database.
By comparison, our Division counted 4,391
members for same time in 2012. Therefore,
membership numbers remained essentially
constant. With 5.2% of the total member‐
ship within ASME our Division continues
to be the sixth largest of the 32 technical
divisions and institutes based on member‐
ship numbers. It should be noted that
ASME as a whole has increased its mem‐
bership by nearly 3% to almost 84,000 over
the last year, and hence, the PVPD portion
has dropped to 5.2% from 5.4%. In fact, the
records indicate that growth in PVPD
membership has ceased as 4,050 PVPD
members were recorded in 2010, 4,363 in
2011, and 4,391 for 2012. PVPD member‐
ship last grew by a significant margin of
about 8% annually between 2009 and 2011.
While our Division continues its strong
position in ASME it is of growing impor‐
tance to intensify our efforts in recruiting
new PVPD members. Please take a moment
to consider who in your organization may
be a good member, and encourage them to
become part of the ASME family. Ask your
colleagues to join ASME and mark “28 –
Pressure Vessels & Piping” as their primary
technical interest.
Since 2009 the PVP Division also maintains
a networking group on LinkedIn to foster
interaction and collaboration between PVP
members and interested non‐members.
This professional site is primarily man‐
aged by Michiel Brongers, who was the
membership chair until 2011. The
LinkedIn site enables you to create a per‐
sonal profile (resume) and share it with
others. Through creating links with your
colleagues and friends, and viewing each
other’s contacts, excellent networking op‐
portunities are given. Membership in our
LinkedIn site has continued its spectacular
growth reaching over 10,000 members,
which corresponds to an astonishing in‐
crease of nearly 100% from just a year ago.
The site also features nine subgroups,
which are ASME B31.3 International Re‐
view Group (18 members), Codes and
Standards (1,177 members), Computer
Applications/Technology & Bolted Joints
(30 members), Design and Analysis (641),
Fluid‐Structure Interaction (387 members),
High Pressure Technology (386 members),
Materials & Fabrication (804 members),
Operations, Applications, and Compo‐
nents (31 members), and Seismic Engi‐
neering (208 members). If you haven’t
tried our LinkedIn site yet, then we
strongly encourage you to do so; simply
visit www.linkedin.com. Join this truly
global community of professionals, take
part in the discussions and connect to col‐
leagues in your field.
Pierre Mertiny
Chair, PVPD Membership
ll papers pre‐
sented at the
PVP‐2012 Conference
were published on a CD
that was distributed to
the Conference atten‐
dees in their registration
packets. Seven volumes
of the PVP‐2012 Conference Proceedings
were published after the Conference:
Codes & Standards
Computer Technology & Bolted Joints
Design & Analysis
High‐Pressure Technology, Fluid‐
Structure Interaction, Nondestructive
Evaluation, Student Paper Symposium &
Competition
Materials and Fabrication
Operations, Applications, & Components
Seismic Engineering
Thank you to all who have worked so hard
to develop the PVP‐2012 program and to
all the authors for their contributions. The
CD and the volumes of the PVP‐2012 Con‐
ference Proceedings include pages recog‐
nizing the dedication and the outstanding
effort of the Track Organizers and Session
Organizers, who contribute countless hours
to the development of the PVP Conference
sessions.
The PVPD Newsletter is published every
year in the Fall/Winter and in Spring. All
articles of interest to the PVP community
are welcome. To submit an article to the
PVPD Newsletter, please contact Marina
Ruggles‐Wrenn at
Marina B. Ruggles‐Wrenn
Chair, PVPD Communications
PVPD Communications
Report
A
Marina Ruggles‐Wrenn
P
Pierre Mertiny
PVPD International
Coordination
Michiel Brongers
T
PVPD Membership
Report
6
he D&A Techni‐
cal Committee is
chartered to provide a
forum to promote the
research, development
and practical application
of design and analysis
methods for the pressure
vessel and piping industries. The D&A
Committee focus is on both the advance‐
ment of traditional methods and the devel‐
opment of new analysis methods in the
areas of: component design, fatigue, inelas‐
tic analyses, stress classification, composite
materials, thermal stresses and elevated
temperature design, fitness for service,
piping and equipment dynamics, bolted
flange joints, probabilistic methods, com‐
putational fluid dynamics, and fracture.
Dr. San Iyer was the Technical Program
Representative for the PVP‐2012 Confer‐
ence in Toronto, Ontario, Canada. The
D&A Technical Committee sponsored 34
technical sessions and one panel session in
17 technical topics. In these technical ses‐
sions, 123 technical papers were presented.
All technical sessions were well attended.
The D&A Technical Committee also had
the pleasure of sponsoring both Conference
Technical Tutorials: Use of CFD in Design,
by Sean McGuffie, Mike Porter and Tommy
Hirst, and Practical Piping Vibration, by
Charles Becht IV.
Mr. Sujay Krishnamurthy is the Technical
Program Representative for the upcoming
PVP‐2013 Conference in Paris, France. The
D&A Technical Committee is planning 31
technical sessions and two panel sessions in
14 technical topics, including two student
he Materials and
F a b r i c a t i o n
(M&F) Technical Com‐
mittee promotes re‐
search, development,
and sharing of technical
information related to
material properties, de‐
velopment and modeling, as well as fabri‐
cation and structural integrity technologies,
for piping, pipelines, components and pres‐
sure vessels. The efforts in recent years
have primarily focused on fracture meth‐
odologies and subcritical crack growth
with environmental effects including corro‐
sion, hydrogen and high temperature. Ar‐
eas of interest also include mechanistic
materials modeling, advanced materials
development including applications to
nuclear new builds, fracture toughness,
miniature mechanical testing, fabrication
processes, composite systems, non‐
destructive examination (NDE), weld integ‐
rity, creep‐fatigue interaction, integrity of
plastic pipe, fitness‐for‐service, and frac‐
(Continued on page 7)
ASME is a society of individuals represent‐
ing companies large and small, that operate
everywhere on earth. The annual Confer‐
ence in Toronto (2012) was attended by
more than 800 people. From that group,
about 300 came from the USA, 100 from
Canada, 100 from Japan, and 70 from the
UK. The remainder of the attendees repre‐
sented another 35 other countries. Wow!
In my work I regularly attend teleconfer‐
ences and other meetings with participants
from three or four continents. Email, in‐
stant messaging, on‐line meetings, and the
internet in general make this possible, and
in fact easy. Language barriers are
breached by sharing diagrams and images
of the equipment that is being discussed.
Files can be instantly shared, using the
built‐in camera on your laptop can show
the participants live.
PVP has set up a group on LinkedIn in
February of 2009 and growth has continued
rapidly. In March of 2013 we welcomed
our 10,000th member! If you are not a mem‐
ber of that group yet, I recommend you
check it out and add yourself
(www.linkedin.com). The discussions are
very interesting and it is easy to ask ques‐
tions of a broad PVP audience. You can see
and post job openings, and add or read
postings of interesting events. Some com‐
panies also provide links to their own web
sites offering their products and services.
In further recognition of PVPD’s commit‐
ment to serve globally, the PVP‐2013 Con‐
ference will be held in Paris, France. Con‐
sider bringing your family or friends and
enjoy being in France during the week of
PVP‐2013, because two major activities will
take place in Paris at that time:
Sunday July 14, 2013 is Bastille Day – a
national holiday with a parade and fire
works
Sunday July 21, 2013 is the Tour de
France finish – a cycling event control‐
ling the city
Travel to Europe/France/outside the U.S.
has some special aspects that Conference
participants should know. Make sure you
read up on some basic background about
the country, local customs, etc. Important
information to know about includes: cus‐
toms/visa requirements, currency & use of
money (checks no longer exist –debit cards
or cash are common), local transportation
(subway), language (typical French sen‐
tences), mobile connections, electrical out‐
lets, and info on Bastille Day and the Tour
de France finish.
Thanks for being part of the PVP commu‐
nity, and we are looking forward to seeing
you in Paris.
Michiel Brongers
Chair, PVPD International Coordination
paper sessions. In addition, one of our
Committee members is planned to collabo‐
rate on a technical tutorial on bolted flange
joints. Dr. Pierre Mertiny is the D&A Co‐
ordinator for the Student Paper Competi‐
tion.
The Design & Analysis Technical Commit‐
tee met on Monday, July 16, 2012 in the
Conference H Room at the Sheraton Centre
Toronto Hotel, Toronto, Ontario, Canada.
Seventeen members, one prospective
member and five visitors were in atten‐
dance. The D&A Technical Committee
welcomed one new elected member at this
meeting: Ms. Alicia Avery.
We look forward to seeing you at PVP‐
2013 in Paris, France. Anyone interested in
participating in the Committee activities is
invited to attend the D&A Committee
meeting at PVP‐2013 and/or contact Mr.
Trevor Seipp.
Trevor Seipp
Chair, Design & Analysis
International Coordination (Continued from page 5)
T
Technical Committee:
Design & Analysis
Trevor Seipp
David Rudland
T
Technical Committee:
Materials &
Fabrications
7
he Operations, Appli‐
cations & Compo‐
nents (OAC) Technical Com‐
mittee promotes applied
Pressure Vessel Technology
addressing a wide range of
topics of importance in the
power and process industries. Current
topics of particular interest include aging
and license renewal of nuclear power
plants, component inspection and degrada‐
tion of valves, piping, heat exchangers and
pumps, diagnostics and measuring meth‐
ods, applied risk analyses, and radioactive
material transportation, storage, and long
term disposition. These aspects of Pressure
Vessel Technology align with a common
theme of safe and efficient industrial op‐
erations where operating conditions in‐
volve highly hazardous materials and/or
challenging engineering environments
such as high temperatures and pressures.
For the 2013 PVP Conference, OAC has
continued its practice of encouraging pub‐
lication on a range of topics, by authors
from around the world. OAC also actively
participates in technical and special topic
tutorials. This year OAC is participating in
a tutorial on career development where a
respected group of international engineers
will share their experiences and insights.
The OAC program for PVP‐2013 includes
technical papers on the following topics:
Safety, Reliability and Risk Assessment
Qualification and Testing Monitoring, Diagnostics and Inspection
Toxic Substances: Storage and Transpor‐tation
Pumps and Valves
Operation and Maintenance of Pressure
Vessels, Heat Exchangers and Structures
Piping and Supports Aging Management and Life Extension
OAC anticipates providing more than 45
papers and presentations divided into 12
different sessions for the PVP‐2013. These
papers are important contributions to the
technology and operation for the power
and process industries which are vital to
efficiently and effectively meeting global
energy challenges in the future. The papers
presented in all sessions have been sub‐
jected to a formal review process in accor‐
dance with ASME requirements.
The OAC encourages sharing applied pres‐
sure vessel technology across industries
such as nuclear and petrochemical, across
international boundaries and continents,
and across generations. Please, join us in
Paris, and participate in an enjoyable, crea‐
tive and thought provoking atmosphere.
OAC actively seeks and encourages new
members.
Steve Hensel
Chair, OAC
topics are planned including three sessions
under the annual Student Paper Sympo‐
sium and Student Paper Competition, as
well as one panel session. These include
three joint sessions with the Codes & Stan‐
dards Technical Committee and one joint
session with the Nondestructive Evaluation
Committee. At the time of preparing this
newsletter, M&F had received 195 accepted
manuscripts. The M&F Technical Commit‐
tee will also be sponsoring the annual NDE
Demonstration Forum. We appreciate the
overwhelming response and support from
the authors and the pressure vessels and
piping community. We expect to have an‐
other successful year at the PVP Confer‐
ence in July 2013.
The M&F Technical Committee has grown
steadily through the years, and is commit‐
ted to stay current with the latest technolo‐
gies. We are proud to have a large interna‐
tional membership, which is open to all
individuals over a wide variety of disci‐
plines, and to those who are interested in
fostering research and development in
pressure vessel and piping materials and
technologies. For more information please
contact David Rudland at
David Rudland
Chair, Materials & Fabrication
If you are interested in applying for ASME Membership, please visit
http://www.asme.org/Membership/Join/ for either online or mail applications.
ture reliability. Efforts have recently been
very active in the area of dissimilar metal
welds including both numerical and ex‐
perimental predictions of weld residual
stresses to address stress corrosion crack‐
ing. The development of materials, NDE,
and fabrication technologies lead to im‐
provement in understanding of material
performance, as well as improvement in
structural design, structural integrity as‐
sessment including leak‐before‐break, plant
life management, and fitness‐for‐service
acceptance criteria for pressure vessels and
piping systems. A number of these activi‐
ties are performed in collaboration with the
Codes & Standards Technical Committee to
support international Codes and Stan‐
dards.
At the 2012 PVP Conference in Toronto,
Ontario, Canada, the M&F TPR (Track Or‐
ganizer) Dr. Chris Truman, along with the
topic/session organizers, developed 25 top‐
ics with 48 paper sessions. A total of 146
written papers from M&F topics were in‐
cluded in the Conference proceedings vol‐
ume, which was published in the 2012 PVP
Conference CD‐ROM. Because of the mul‐
tidisciplinary nature of the Materials and
Fabrication Technical Committee, three
sessions were organized in collaboration
with the Codes and Standards Technical
Committee, two sessions were organized in
collaboration with the Design and Analysis
Technical Committee, and eight sessions
were organized in collaboration with the
Operations, Applications and Components
Technical Committee and the NDE Divi‐
sion. The M&F Technical Committee also
sponsored the NDE Demonstration Forum.
The 2012 M&F Technical Committee Meet‐
ing was held during the 2012 PVP Confer‐
ence, and was attended by approximately
50 members and guests. Six new Technical
Committee members were welcomed in
2012.
For the 2013 PVP Conference to be held in
Paris France, the M&F Technical Program
is led by the M&F TPR Dr. Do‐Jun Shim. A
total of 51 paper sessions under 23 separate
Materials & Fabrication (Continued from page 6)
Technical Committee:
Operations,
Applications &
Components
Stephen J. Hensel
T
8
he Computer Tech‐
nology & Bolted
Joints (CTBJ) Technical Com‐
mittee is a group of dedi‐
cated engineers, scientists
and academia that promotes
the development and shar‐
ing of technical information
and recent developments of computer
technology and bolted joints within the
Pressure Vessel & Piping Division.
CTBJ addresses issues relating to design
and analysis of pressurized joints with and
without gaskets, fastening and joining,
stuffing box technologies and leak testing.
It also advocates engineering process capa‐
bilities, hardware development and usage,
software tools, computational algorithms,
linear and nonlinear mechanics, material
behavior modeling, modeling techniques,
fatigue, fracture and damage mechanics,
probabilistic analysis, risk assessment and
manufacturing process simulations.
The CTBJ Technical Committee presented
eleven technical sessions and organized a
software demonstration forum at the 2012
PVP Conference in Toronto, all of which
were well attended and generated a high
level of interest. Special thanks go to Tech‐
nical Program Representative (TPR) Jerry
Waterland and to the session developers
for their support and dedication and for
making the 2012 CTBJ sessions a great
success. During the 2013 PVP Conference
in Paris, France, the CTBJ Technical Com‐
mittee is looking forward to fruitful techni‐
cal exchanges with participants from Bel‐
gium, Brazil, Canada, China, France, Ger‐
many, Japan, UAE, UK, US, Saudi‐Arabia,
and Taiwan. Our 2013 TPR, Jose Carlos
Veiga and the session developers are do‐
(Continued on page 9)
he Codes & Stan‐
dards (C&S) Tech‐
nical Committee pro‐
vides a forum to promote
developments and ex‐
change of technical infor‐
mation on contemporary
topics related to the C&S
for pressure vessels and piping. There are a
multitude of consensus codes, standards,
rules and guidelines on design, construc‐
tion and fitness‐for‐service for vessels and
piping in the various industrial fields in
many countries. Although the evaluation
methodologies are different, there is a need
to have harmonization to obtain consistent
results among these different codes. The
C&S Technical Committee has supported
and offered opportunities to exchange in‐
formation of mutual interests at PVP Con‐
ference over the years.
The majority of the papers in C&S are re‐
lated to design and construction, metallic
and nonmetallic integrity methods, repair,
replacement and mitigation technologies,
in‐service inspection, high temperature
codes and new criteria for code improve‐
ment. The papers in C&S contain technical
basis documents for proposals of code
changes and introduction of new revisions
for the ASME Boiler and Pressure Vessel
Codes, API 579/ASME FFS, French Codes
RCC‐M and RSE‐M, German Guideline
FKM, British Standard BS 7910, Chinese
Code GB/T, Japanese Code JSME, etc. The
C&S Committee has become truly interna‐
tional in nature bringing together people
from many countries exchanging technol‐
ogy and sharing codes and standards de‐
velopments in their part of the world.
The 2012 PVP Conference in Toronto, Can‐
ada, was very successful. The C&S Com‐
mittee sponsored 18 major technical topics.
A total of 97 technical papers were pre‐
sented in 27 sessions at the Conference.
Some of these sessions were jointly spon‐
sored by the M&F Committee. The PVP
2012 C&S Committee meeting was at‐
tended by 37 members and visitors. During
the meeting, Honors and Awards Chair
Douglas Scarth awarded the Certificate of
Recognition to Bostjan Bezensek for the
2012 TPR (Technical Program Representa‐
tive) work and Certificate of Recognition to
Koji Takahashi for his C&S dedicated ser‐
vice, and Koji Takahashi and Reza Adibiasl
for serving as the Committee’s representa‐
tives in the Student Paper Symposium and
Competition. Steven Xu, Douglas Scarth
and Russell Cipolla received the PVP‐2012
Outstanding Technical Paper Award,
which was presented at the C&S session.
David Rudland and Gary Stevens received
the PVP Jim Farr Outstanding Conference
Session Award for organizing the ASME/
NRC Symposium on Nuclear Codes and
Standards at the PVP‐2011 Conference. The
C&S Committee has grown steadily
through the years, and we are proud to
have a large international membership.
This year’s PVP‐2013 Conference will be
held in Paris, France. Everyone involved in
the progress is working very hard to make
this a very successful conference. At the
time of preparing this newsletter, C&S has
received approximately 160 technical pa‐
pers within 34 sessions, the highest ever.
The C&S Committee sessions for this year’s
Conference are being jointly organized and
led by TPR, Jinyang Zheng from China and
Bostjan Bezensek from the UK. Coordina‐
tors from the student paper competition for
C&S are again Koji Takahashi from Japan
and Reza Adibiasl from Canada. New top‐
ics in the C&S sessions are Fatigue Moni‐
toring and Related Assessment Methods by
Juergen Rudolph, Steffen Bergholz and
Benedikt Heinz and Fracture and Mechani‐
cal Property Predictions by Sub‐Sized
Specimens for Standards by Bohumir
Strnadel, Ivo Dlouhy and Petr Dymacek.
We have high expectation for the upcom‐
ing Conference in Paris. A very unique
tutorial on Application of Fitness‐for‐
Service Procedures involving ASME Code
Sec. XI (US), RSE‐M (France), BS‐7910(UK)
and JSME (Japan) is being prepared by
Bostjan Bezensek, with summaries of code
changes, new codifications and their tech‐
nical background lectured by members
who are developing each Code. C&S Com‐
mittee also intends to hold panel sessions
on the Nuclear Code Harmonization Ac‐
tivities for Design. We believe it will be a
very successful conference.
The Committee is open to individuals who
are interested in Codes & Standards. Any‐
one interested in the C&S Technical Com‐
mittee activities is welcome to attend the
Committee meeting. For more informa‐
tion, please contact Kunio Hasegawa at
hasegawa‐[email protected].
Kunio Hasegawa Chair, Codes & Standards
Kunio Hasegawa
Technical Committee:
Codes & Standards
T
Technical Committee:
Computer Technology
& Bolted Joints
T
Hakim A. Bouzid
9
he High Pressure
Technology Com‐
mittee focuses on design,
research, development
and operation of high
pressure equipment and
systems. The end users’
experience is a key topic
during the PVP Conferences and it pro‐
vides important feedback for the develop‐
ment of ASME high pressure codes and
standards. The academia, exploring funda‐
mental, and disseminating cutting‐edge
aspects of High Pressure Technology, is
traditionally well represented.
The High Pressure Technology Committee
held its annual meeting during the PVP‐
(Continued on page 10)
he Fluid‐Structure
Interaction (FSI)
Technical Committee pro‐
motes the study and appli‐
cation of the dynamics of
fluid‐structure interaction
as they relate to the design
and operation of pressure
vessels, piping systems and components.
Emphasis is placed on the fundamental and
engineering aspects of flow‐induced vibra‐
tion, fluid‐solid interactions, shock and
wave propagation, fluid dynamics and
transient thermal hydraulics, multi‐physics,
as well as fluid‐structure dynamical sys‐
tems and their response. The Technical
Committee organizes sessions on these
topics at conferences and symposia, en‐
courages and supports publication in the
area of FSI and promotes the recognition of
outstanding engineering achievements and
significant individual contributions to pres‐
sure vessels and piping technology.
The forthcoming PVP‐2013 Conference,
which will be held in Paris, promises to be
a very interesting technical and social
event. The FSI TC is sponsoring more than
88 papers distributed over 22 sessions. A
student paper competition is also planned.
This impressive level of participation is due
to the hard work and dedication of the out‐
going Committee Chair, Jong Chull Jo, the
2013 FSI Technical Program Representa‐
tive, Arris Tijsseling, as well as the leaders
of the task groups: Njuki Mureithi, Shigeru
Itoh, Fred Moody, Howard Levine, George
Papadakis and Christina Giannopapa. In
my capacity as the new FSI Technical Com‐
mittee Chair, I thank them all for their ef‐
fort in organising such a promising event. I
also take this opportunity to strongly en‐
courage all individuals of the FSI commu‐
nity to attend the PVP 2013 Conference; I
am sure you will not be disappointed.
In honor of the late Dr. S. S. Chen who
passed away in February 2012, Young
Kwon and M. K. Au‐Yang organized a spe‐
cial session with invited speakers at the
PVP‐2012 in Toronto, Canada. Dr. Chen
made major contributions to the FSI Com‐
ing an excellent job in planning five bolted
joint sessions, three computer technology
sessions, one student paper session, a soft‐
ware demonstration forum and a special
tutorial on bolted joints organized jointly
with D&A. The CTBJ technical sessions
are: Design and Analysis of Bolted Flange
Joints, Design and Analysis of Pressure
Sealed Joints, Assembly and Tightening of
Bolted Joints, Threaded Fasteners, Ele‐
vated Temperature Behavior of Bolted
Joints, Computational Topics in Explicit
FEA, Computational Applications in Fa‐
tigue, Fracture and Damage Mechanics,
and Probabilistic and Risk Based Assess‐
ment.
The next CTBJ Technical Committee meet‐
ing to be held in conjunction with the 2013
PVP Conference in Paris, France will be
chaired by our incoming chair Wolf
Reinhardt. As the outgoing chair I would
like to thank all the CTBJ Committee mem‐
bers for their dedication and commitment
in organizing CTBJ events during the past
four years. Special thanks are also due to
the BJ group members within the CTBJ
Technical Committee for bearing with me
for the past 10 years.
The CTBJ Technical Committee is always
seeking to increase its active membership
and to facilitate individuals or groups
wishing to advance and/or promote novel
or advanced applications related to com‐
puter technology and bolted joints within
the pressure vessel industry. Those who
would like to join the Committee are in‐
vited to the Committee meeting, the time
and location of which will be listed in the
Conference final program.
Hakim A. Bouzid
Chair, Computer Technology & Bolted Joints
mittee and the flow‐induced vibration
field, especially in the area of tube bundles
vibration. Another great loss to the FSI
community is the passing away of Profes‐
sor John Fitzpatrick of Trinity College
Dublin in September 2012. In the PVP 2013
Conference, the opening session of the
Flow‐Induced Vibration Symposium will
be dedicated to his memory. A collection of
FIV papers will also be published in a spe‐
cial issue of the JPVT dedicated to his
memory.
The FSI Technical Committee has been
growing continuously over the years and
its current membership is truly interna‐
tional. The Committee welcomes new
members who are interested in promoting
research and development in the area of
FSI in general and its application to the
pressure vessel and piping technology in
particular. Those who would like to join
the FSI Committee as official members are
encouraged to send their resume to the FSI
Chair. In addition, anyone interested in the
Committee’s activities is invited to attend
the FSI Committee meeting at the PVP‐
2013, or contact the Committee Chair. The
time and location of the meeting will be
listed in the Conference program.
Samir Ziada
Chair, Fluid Structure Interaction
Computer Technology &
Bolted Joints (Continued from page 8)
Technical Committee:
Fluid Structure
Interaction
T
Samir Ziada
T
Ricky D. Dixon
Technical Committee:
High Pressure
Technology
10
he Seismic Engi‐
neering Technical
Committee (SETC) is
focused on the promo‐
tion and enhancement of
the study and applica‐
tion of seismic engineer‐
ing, as it relates to the design and operation
of pressure vessels, liquid storage tanks,
piping systems and other structural sys‐
tems and components. Encouraging partici‐
pation in the annual ASME Pressure Ves‐
sels & Piping Conference has proven to be
an effective way to achieve the SETC’s
chartered goal. The Committee organizes
sessions covering emerging research and
applications in a broad range of topics in‐
cluding seismic design, modeling and
analysis; seismic response qualification;
damping and energy dissipation; seismic
isolation and vibration control; seismic
testing and verification; high level response
of piping and vessels; seismic codes, stan‐
dards and criteria; seismic damping exami‐
nation and strength reinforcement; fluid
and solid interaction; seismic analysis and
design of liquid storage tanks and pressure
vessels; seismic analysis and design of in‐
dustrial piping; and structural reliability
and risk assessment.
For the 2012 PVP Conference in Toronto,
Canada, the Seismic Engineering Technical
Committee (SETC) developed nine paper
sessions, with 29 technical papers and two
forum sessions. The subject of the first fo‐
rum session, organized by Gerry Slagis,
was the seismic design criteria of piping
components. The second forum session
concerned the presentation of an interim
report of the Great East Japan Earthquake.
The TPR for PVP 2012 was Tomoyo Tani‐
guchi, Professor at Tottori University, Ja‐
pan.
For the PVP 2013 Conference to be held in
Paris, France, the Seismic Engineering
Technical Committee has developed 12
paper sessions. The TPR for the PVP 2013
Conference in Paris will be Tomoyo Tani‐
guchi. One session of the above is dedi‐
cated to the Rudy Scavuzzo Student Paper
Symposium and Competition, whereas two
sessions are devoted to the results of the
European Research Program INDUSE
(Seismic Safety of Tanks, Pressure Vessels
and Piping, www.mie.uth.gr/induse), spon‐
sored by the European Commission during
2009‐2012.
The SETC officers are: Chair, Spyros A.
Karamanos; Vice Chair, Tomoyo Tanigu‐
chi; and Secretary, Chong‐Shien Tsai. Spy‐
ros Karamanos and Chong‐Shien Tsai are
currently Associate Editors of the ASME
Journal of Pressure Vessel Technology.
Seismic engineering is a crosscutting disci‐
pline that interacts with many other tech‐
nical specialties. Since seismic issues are
globally important, our membership is a
truly international group that welcomes
new members. This offers an opportunity
to meet and interact with engineers and
researchers from around the world who
are working in the various topics associ‐
ated with Seismic Engineering. I encour‐
age all who may be interested in seismic
engineering issues and desire more infor‐
mation on the activities of PVP SETC to
contact me at +30 24210 74086, or via email
2012 Conference in Toronto, Canada. It is
an international committee with represen‐
tatives from nine countries and three conti‐
nents.
For the PVP 2012 Conference, the Commit‐
tee organized technical sessions that cov‐
ered various aspects of high pressure tech‐
nology. Over the last years especially, the
coverage of the field of impulsively loaded
vessels has increased strongly. This cutting
edge technology offers many new develop‐
ments which also will initiate changes in
other part of the High Pressure world. At the PVP‐2012 Conference, a special treat
was the David Kendall memorial session.
It was organized in remembrance of one of
the founding fathers of the HPT Commit‐
tee who passed away in 2011. The session
was truly moving. Special thanks goes out
to Ed Rodriguez and Jan Keltjens, the
Technical Program Representatives, ses‐
sion developers, chairmen and especially,
the authors.
In 2013 the PVP Conference will be in
Paris, France. Darren Stang and Rick
Hallman, the TPR’s, are working hard in
developing and planning sessions on vari‐
ous areas of High Pressure technology
such as Design and Analysis, Impulsively
Loaded Vessels and as session on Polyeth‐
ylene production. It promises to become a
very interesting Conference.
Anyone interested in high pressure tech‐
nology activities is invited to join us and
participate at the next Committee meeting
at PVP‐2013 in Paris, France.
Ricky D. Dixon
Chair, High Pressure Technology
High Pressure Technology (Continued from page 9)
T
Spyros Karamanos
Technical Committee:
Seismic Engineering
The ASME Digital
Library
SME is the premier professional
membership organization for more
than 127,000 mechanical engineers and
associated members worldwide. ASME
also conducts one of the worldʹs largest
technical publishing operations, offering
thousands of titles including some of the
professionʹs most prestigious journals, con‐
ference proceedings, and ASME Press
books.
The ASME Digital Library is ASMEʹs pri‐
mary repository of current and archival
literature featuring:
ASMEʹs Transaction Journals from
1970 to the present
ASMEʹs Conference Proceedings from
2002 to the present
ASME Press eBooks selected from 1998
to the present. Initially, the eBook
package will include about 50 of our
newest volumes, published from 2006
through mid‐2009, with up to 100 titles
by 2011.
Additional information can be found at:
http://asmedigitalcollection.asme.org/.
A
11
PVP 2014 Anaheim
Hyatt Regency Orange County
July 20– 24, 2014
ASME Pressure Vessels & Piping Conference Innovation and Imagination in Pressure Vessels and Piping
Join us in beautiful Anaheim, California, for the 2014 ASME Pressure Vessels and Piping Conference! PVP Conferences are known to be the outstanding international technical forum for participants to further their knowledge-base through exposure to diverse engineering topics and dissemination of cutting-edge technol-ogy. Opportunities abound to exchange opinions and ideas, both from industry and academia, in the many topical areas related to Pressure Vessel and Piping technologies for the Power and Process Industries. Par-ticipants from approximately 40 countries in Europe, Africa, the Middle East, Asia, the Americas, and the Oce-ania islands assure an interesting mixture of topics, ideas, and viewpoints. The ASME Pressure Vessels & Piping Division is the primary sponsor of the PVP-2014 Conference, with ad-ditional participation by the ASME Nondestructive Examination (NDE) Division. More than 190 paper and panel sessions are planned, as well as workshops, tutorials, NDE and Software Demonstration Forums, and our traditional Student Paper Competition and Symposium. GENERAL TOPICS: (1) Codes & Standards; (2) Computer Technology & Bolted Joints; (3) Design & Analy-sis; (4) Fluid-Structure Interaction; (5) High Pressure Technology; (6) Materials & Fabrication; (7) Operations, Applications & Components; (8) Seismic Engineering; (9) Non-Destructive Examination; and (10) our Student Paper Competition and Symposium. SCHEDULE: Abstracts are due by November 11, 2013. Authors will be notified of abstract acceptance by December 2, 2013. Draft papers are due by February 10, 2014. Paper peer review comments will be re-turned by March 10, 2014. A Copyright Agreement Form for each paper, and the final manuscripts in the standard ASME format for publication, must be received by April 7, 2014. All presented technical papers will be published as referencable documents available post-conference via hardcopy or electronic media. INFORMATION: The conference website URL is: http://www.asmeconferences.org/PVP2014/. Technical paper abstracts must be submitted electronically through the website. Visit the website for additional informa-tion.
PVP Conference Chair Daniel T. Peters
Structural Integrity Associates, Inc. 16339 Irish Road
Edinboro, PA 16412, USA Phone/Fax: 814-440-8173/330-899-9753
Email: [email protected]
PVP Technical Program Chair Marina B. Ruggles-Wrenn
Air Force Institute of Technology 2950 Hobson Way
WPAFB, OH 45433-7765, USA Phone: 937-255-3636x4641
Email: [email protected] Sponsorship Chair
Carl E. Jaske Det Norske Veritas (USA), Inc.
5777 Frantz Road Dublin, OH 43017-1386, USA
Phone: 614-761-6916/Fax: 614-761-1633 E-mail: [email protected]
12
EXECUTIVE COMMITTEE
Chair
Michael E. Nitzel
M.E. Nitzel Engineering Services
12839 Lakecrest Dr.
Nampa, ID 83686
Ph: 208‐465‐6434
E‐mail: [email protected]
Vice Chair
Daniel T. Peters
Structural Integrity Associates, Inc.
16339 Irish Road
Edinboro, PA 16412
Ph/Fax: 814‐440‐8173/330‐899‐9755
E‐mail: [email protected]
Programs
Daniel T. Peters
Structural Integrity Associates, Inc.
16339 Irish Road
Edinboro, PA 16412
Ph/Fax: 814‐440‐8173/330‐899‐9755
E‐mail: [email protected]
Communications
Marina B. Ruggles‐Wrenn
Dept. of Aeronautics and Astronautics
Air Force Institute of Technology AFIT/ENY
Wright‐Patterson AFB, OH 45433‐7765
Ph/Fax: 937‐255‐3636 ext. 4641/656‐7621
e‐mail: [email protected]
Honors and Awards
Douglas A. Scarth
Kinetrics Inc.
800 Kipling Ave
Toronto, Ontario, Canada
Ph: 416‐207‐6000 ext 6383/416‐236‐0979
E‐mail: [email protected]
Professional Development
Maher Y. A. Younan
The American University of Cairo
School of Sciences and Engineering
P.O. 74, New Cairo 11835
Cairo, Egypt
Ph: +20 2 2615 2583/+20 2 2795 7565
E‐mail: [email protected]
SENATE of PAST PVP CHAIRS
President
Young W. Kwon
Dept. of Mechanical &
Astronautical Engineering
Naval Postgraduate School
700 Dyer Road
Monterey, CA 93943
Ph/Fax: 831‐656‐3468 / 2238
E‐mail: [email protected]
J. of PRESSURE VESSEL TECHNOLOGY
Editor
Young W. Kwon
Naval Postgraduate School
700 Dyer Road
Monterey, CA 93943
Ph/Fax: 831‐656‐3468 / 2238
E‐mail: [email protected]
ADMINISTRATIVE COMMITTEES
Membership Chair
Pierre Mertiny
Department of Mechanical Engineering
University of Alberta
Edmonton, Alberta, T6G 2G8 Canada
Ph/Fax: 780‐492‐6982/2200
E‐mail: [email protected]
Publicity Chair and Newsletter Editor
Marina B. Ruggles‐Wrenn
Dept. of Aeronautics and Astronautics
Air Force Institute of Technology AFIT/ENY
Wright‐Patterson AFB, OH 45433‐7765
Ph/Fax: 937‐255‐3636 ext. 4641/937‐656‐7621
e‐mail: marina.ruggles‐[email protected]
International Coordinator
Michiel Brongers
Det Norske Veritas (U.S.A.), Inc.
5777 Frantz Road
Dublin, OH 43017‐1386
Ph/Fax: 614‐761‐1214/1633
E‐mail: [email protected]
TECHNICAL COMMITTEE CHAIRS
Codes & Standards
Kunio Hasegawa
Japan Nuclear Energy Safety Organization
Tokyo Reit Toranomon Bldg.
Toranomon 3‐17‐1, Minato‐ku
Tokyo, Japan 105‐0001
Ph/Fax: +81‐3‐4511‐1751/1897
E‐mail: hasegawa‐[email protected]
Computer Technology & Bolted Joints
Hakim Bouzid
Mechanical Engineering Department
Ecole de Technologie Superieure
1100 Notre‐Dame Quest
Montreal, Quebec H3C 1K3
Ph/Fax: 514‐396‐8563/8530
E‐mail: [email protected]
Design & Analysis
Trevor Seipp
Becht Engineering Canada, Ltd.
110‐259 Midpark Way SE
Calgary, Alberta, T2X 1M2, Canada
Ph/Fax:403‐256‐3575 / 3500
E‐mail: [email protected]
Fluid‐Structure Interaction
Samir Ziada
McMaster University
1280 Main St. W.
Hamilton, Ontario, L8S 4L7, Canada
Ph/Fax: 905‐572‐7530 / 7944
E‐mail: [email protected]
High‐Pressure Technology
Ricky Dixon
Structural Integrity Associates, Inc.
11515 Vanstory Drive, Suite 125
Huntersville, NC 28078
Ph: 704‐977‐1359 / 704‐597‐0335
E‐mail: [email protected]
Materials & Fabrication
David Rudland
United States Nuclear Regulatory Commission
21 Church Street, Room 5C14, Mail Stop CSB‐
5CA24
Rockville, MD 20853
Ph/Fax: 301‐251‐7622 / 7420
E‐mail: [email protected]
Operations, Applications, & Components
Stephen Hensel
Savannah River Nuclear Solutions
Building 705‐K
Aiken, SC 29802
Ph: 803‐557‐3523
E‐mail: [email protected]
Seismic Engineering
Spyros Karamanos
Dept. of Mechanical & Industrial Engineering
University of Thessaly
Pedio Areos
Volos 38334, Greece Ph/Fax: +30‐24210‐74086/7412
E‐mail: [email protected]
ASME STAFF
Melissa Torres
Program Manager
Engineering Research &
Technology Development
ASME
Two Park Avenue
New York, NY 10016‐5990
Ph/Fax: 212‐591‐8257/7856
E‐mail: [email protected]
Jacinta McComie‐Cates
Administrator
Knowledge & Community
ASME
Two Park Avenue, 23W2
New York, NY 10016
Ph/Fax: 212‐591‐7052/7671
E‐mail: [email protected]
********** PVPD Newsletter Committee
Marina Ruggles‐Wrenn, Editor
and Division Communications Chair
Michael E. Nitzel, Division Chair **********
To submit an article for upcoming issues
of the PVPD Newsletter, please
contact Marina Ruggles‐Wrenn at
2012–2013 Pressure Vessels & Piping Division Officers