Product Specifications Fiber.pdf · ·FTTX ·Fiber interface system ·Fiber transmission system...

Product Specifications Fiber Distribution Unit

Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 1 of 5 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com

Your Partner For Network Optimization

H101710JS080

Outdoor FDU

Features and functions

- Suitable for outdoor installation with IP65 protection

- Wall mount and pole mount available

- External cable can either be loose tube cable or slotted cable

- Output cable can either be optical fiber cord or drop cable

- Fiber additional attenuation: ≤0. 1dB

- Fiber bending radius: ≥30mm

- Axes orientation tensile strength: ≥1000N

- Crush resistance: ≥2000N/100mm

- Operating temperature: -20℃～+60℃

24F Outdoor FDU 24F Outdoor FDU




H101710JS080

Outdoor FDU with Adapter Features and functions

-Suitable for outdoor installation with IP65 protection


- Various interface available SC, FC or LC



- Axes orientation tensile strength: ≥1000N

- Crush resistance: ≥2000N/100mm


4F Outdoor FDU-SC

24F Outdoor FDU-SC 12F Outdoor FDU-LC 8F Outdoor FDU-LC




H101710JS080

Indoor FDU Features and functions

- Wall mount，dust preventable

- Made of high quality steel sheet, surface plastic spray




24F Indoor FDU-SC

12F Indoor FDU-SC




H101710JS080

Part Number

P/N Description Dimension

W x H x D(mm) Splice tray

counts(Max)

N-FDU-1001012B 12F Outdoor FDU, SPCC 230 x 350 x 100 1



N-FDU-1121004D 4F Outdoor FDU,SC/APC simplex, SPCC 200 x 250 x 55 1

N-FDU-1411012D 12F Outdoor FDU,LC/UPC duplex, SPCC 230 x 290 x 70 1

N-FDU-1111024D 24F Outdoor FDU,SC/UPC simplex, SPCC 230 x 350 x 110 2



N-FDU-2001012B 12F Indoor FDU, SPCC 190 x 290 x 80 1



N-FDU-2111012D 12F Indoor FDU,SC/UPC simplex, SPCC 250 x 200 x 70 1

N-FDU-2411012D 12F Indoor FDU,LC/UPC duplex, SPCC 230 x 290 x 70 1



N-FDU-1411008A 8F Outdoor FDU,LC/UPC duplex, SPCC 240 x 290 x 70 0

N-FDU-1412024A 24F Outdoor FDU,LCD/UPC, stainless steel 240 x 290 x 80 0

N-FDU-2411024A 24F Indoor FDU,LCD/UPC, SPCC 240 x 290 x 80 0

N-FDU-2411024C 24F Indoor FDU,LCD/UPC, SPCC, with pigtail 240 x 290 x 80 2





H101710JS080

Ordering Information

Netop ID

Environment Adapter type InterfaceCabinet material

Max. capacity Splice

tray/pigtail N-FDU- X X X X XXX X

1: Outdoor 0: no adapter 0: no

adaptor

1: SPCC 002: 2cores A: no splice tray

2: Indoor 1: SC simplex 1: UPC 2: Stainless

steel

004: 4cores B: no pigtail

2: SC duplex 2: APC 3: SMC 008: 8cores C: with 0.9mm

pigtail 2m

3: LC simplex 012: 12cores D: with 2.0mm

pigtail 2m

4: LC duplex 024: 24cores E: with 3.0mm

pigtail 2m

5: FC simplex 036: 36cores

6: ST simplex 048: 48cores

7: MPO adaptor 072: 72cores

096: 96cores

Product Specifications Cross Connection Cabinet


1

F100110LZ001


NT-

TQ23

3_R

07/4

.0

Stainless Cabinet Optical Cable Cross Connecting Cabinet (hereafter named OCC) is used to connect the fiber trunk cable and the distribution cable between

the interface devices, which has the import of cable, fastness, grounding protection, welding, jumping (distribution), storage, switching and

other functions. With a high versatility in the optical route, especially for fiber optical communication system into a central office trunk

cable and distribution side, can achieve the fiber optic lines linked, distributed and transited easily.

Product feature

·Cabinet is made of high strength stainless steel, protection class IP65, high intension,corrosion‐resistant, all weatherproof and can resist

accidental damage or malignant destruction. With double‐layer structure, filled with non‐combustible and a better insulation effect of the

molding quartz glass wool in the middle, greatly enhanced the cabinet effect of heat insulation, and flame‐retardant properties

·All cabinet corners using a dedicated rounded mold forming, surface treatment using drawing or electrostatic spray, aesthetic appearance.

·The special cabinet inside and outside gas convection channel can prevent water vapor coagulation effectively

·Three‐point locking pins, safety and reliability.

·Closed cabinet structure, supply the cable terminal and distribution with physical protection, prevent the optical fiber cable from

accidental damage.

·Cable entrance from the rack at the bottom and be fixed, grounding and protection.

·Equipped with an integrated fiber‐optic splice wiring module set fiber fusion welding, pigtail to accommodate and distribution all in one,

easy to use and maintain. Card installed FC, SC adapter, the adapter was 30 ° row of cloth, which ensures that the fiber bending and a half

by ≥ 40mm, avoiding the laser burns the human eye and optical fiber connectors to be injured when scheduling the roots. with a clear

fiber‐optic distribution sign.

Applications

·FTTX

·Fiber interface system

·Fiber transmission system

Table 1 Table of Accessories configuration

Accessories name Qty. Unit OCC User manual 1 ea Certification 1 ea Expansion Screw 4 set Nylon ties 20 ea Key 1 ea Fiber protecting tube 1 set Fiber heat‐shrinkable tube 1 set 3M tape 1 ea



2

F100110LZ001


NT-

TQ23

3_R

07/4

.0

A Double‐layer stainless steel cabinet

B Optical Fiber Fusion and DistributionIntegrated Module

C Optical splice Unit

D Cable import Unit

E Double‐layer stainless steel front door

F Cabinet bottom



3

F100110LZ001


NT-

TQ23

3_R

07/4

.0

144F Stainless cabinet

Specification Comply with YD/T998‐2007

Connecter loss(including insertion, Changeability and Durability)≤0.5dB

Insert loss≤0.2dB

Return loss：PC≥40dB UPC≥50dB APC≥60dB

Connector life＞1000 times

Insulation resistance (between frame and protection grounding)＞20000MΩ/500V(DC)

Dielectric strength (between frame and protection grounding)＞3000V(DC)/1min no breakdown, no arc.

Dimension：1350×650×320(mm)

Installation dimension：600×200(mm)

Single side operation

Weight：150 Kg

Working environment:

Environment temperature：‐40℃～80℃

Relative humidity：≤85％（40℃）

Atmosphere pressure：70～106kpa

Installation

Frame, floor, wall mounted

The series OCC bottom has four φ13 holes, which can be pre‐installed into the M10 expansion bolts on the base

Put on the OCC with the fastening nuts



4

F100110LZ001


NT-

TQ23

3_R

07/4

.0


Specification

OCC standard：YD/T988‐2007

Connecter loss(including insertion, Changeability

and Durability)≤0.5dB

Insert loss≤0.2dB



Insulation resistance (between frame and

protection grounding)＞20000MΩ/500V(DC)

Dielectric strength (between frame and protection

grounding)＞3000V(DC)/1min no breakdown,

no arc



Single side operation

Weight：185 Kg





Installation


The series OCC bottom has four φ13 holes, which can be pre‐installed into the M10 expansion bolts on the base.

Put on the OCC with the fastening nut.



5

F100110LZ001


NT-

TQ23

3_R

07/4

.0


Specification

OCC standard：YD/T988‐2007

Connecter loss(including insertion,Changeability and Durability)≤0.5dB

Insert loss≤0.2dB



Insulation resistance (between frame and protection grounding)＞20000MΩ/500V(DC)

Dielectric strength (between frame and protection grounding)＞3000V(DC)/1min no breakdown, no arc



Double side operation

Weight：225 KG





Installation


The series OCC bottom has four φ13 holes, which can be pre‐installed into the M10 expansion bolts on the base. Put on the

OCC with the fastening nut.



6

F100110LZ001


NT-

TQ23

3_R

07/4

.0

N-OCC-76801B 768F Outdoor SMC Double-Side OCC Applications

The advanced design of double‐sided operation and divided management make the operation and maintenance very

easy. So it’s easy to update the network.

Features and functions 1. Cabinet material SMC reinforced thermoplastic material anti septic, anti corrosive and preservative up to 50

years. Size1450 x 750 x 360(mm)

2. Capacity ‐ 8 drawers house 2 groups of 4 splice trays per stack. Expandable to 3 groups

3. Splice tray accommodate minimum 12/24 splices

4. Cable entry from front and back for easy access and cable management

5. Both doors front and back accessible during maintenance and servicing

6. Electronic 3 point linkage locking on both doors

7. Cable entry fixed system ‐ up to minimum 32 cablesEach side 18 cables fasteners.

8. 2 group of splice tray accommodate minimum 700 fiber splices per cabinet Additional 1 group splice tray accommodate up to 350 fiber

splices (optional)

9. Sliding splice tray drawer for easy access

10. Cable entry fixed system ‐ up to minimum 32 cables Each side 18 cables fasteners

11. Suitable for outdoor installation with IP65 protection



F100110LZ001NT-

TQ23

3_R

07/4

.0


Optical Cross Connection Cabinet

Netop ID

Max.

distribution capacity

Adapter type

InterfaceBody

materialOperation

type Core number

require Pigtail Loaded

N- OCC- XXX X X X X XXX X

144 0:

Null 0:

Null 1:

SMC

A: Single face

024: 24cores

0: without pigtail

288 1: SC

Simplex 1:

UPC

2: Stainless

steel

B: Double

face

072: 72cores

1: with 0.9mm

pigtails

576 2: SC

Duplex 2:

APC 3:

SPCC

192: 192cores

customerized pigtails

768 3: FC

Simplex

384: 384cores

4:LC

duplex

Full loaded Or

customerized

Product Specifications N-ODF-XXXXXXXXX Optical Distribution Frame

Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com


Page 1 of 3 H101310GM001

Features

Long-term layout for future optical distribution system expansion

Modular design makes capacity increasing easily

Excellent fiber cord management with excess cable storage

Adapt to optic access networks cosmically with enormous core capacities

High density design with good maneuverability

Suitable for ribbon fanout or breakout cable assembly

Various interface available SC, ST, FC or LC

Empty frame with splice tray or pre-install adapters and pigtails

Critical elements control of cable bending radius, cable routing paths, cable access and physical protection

High-quality steel sheet frame with surface plastic spray

ABS plastic cable splice tray with cover

Comply with MII standard YD/T778-1999 and relevant international standards

Applications

FTTx central office

Data Center

Long-distance optical transmission network

Optical access network

Video transmission network

Data communication network

Operation Conditions

Transport and Storage temperature：-40℃ ～ +70℃

Operation temperature：-10℃ ～ +50℃

Relative humidity：≤85％(+30℃)

Atmosphere pressure：70 kPa ~106 kPa




Page 2 of 3 H101310GM001

Figures

A Type B Type

C Type D Type

E Type 12-Fiber Splice Tray




Page 3 of 3 H101310GM001

Specifications

Item Type Size（mm） Capacity（fiber） 1 N-ODF-A20XXXXXX 2000×860×320 ≤576 2 N-ODF-A22XXXXXX 2200×860×320 ≤624 3 N-ODF-A26XXXXXX 2600×860×320 ≤792 4 N-ODF-B20XXXXXX 2000×800×320 ≤696 5 N-ODF-B22XXXXXX 2200×800×320 ≤792 6 N-ODF-B26XXXXXX 2600×800×320 ≤936 7 N-ODF-C20XXXXXX 2000×600×320 ≤288 8 N-ODF-C22XXXXXX 2200×600×320 ≤288 9 N-ODF-C26XXXXXX 2600×600×320 ≤384 10 N-ODF-D20XXXXXX 2000×240×320 ≤144 11 N-ODF-D22XXXXXX 2200×240×320 ≤144 12 N-ODF-D26XXXXXX 2600×240×320 ≤192 13 N-ODF-E20XXXXXX 2000×650×320 ≤648 14 N-ODF-E22XXXXXX 2200×650×320 ≤696 15 N-ODF-E26XXXXXX 2600×650×320 ≤792


Netop ID Frame type Frame high Adapter type Interface Port counts Pigtail Loaded

X XX X X XXX X

N-ODF- A:A series 20:2000mm 0:Null 0: Null 000:Null 0: without pigtail

B:B series 22:2200mm 1:SC 1: UPC 1: with 0.9mm pigtails

C:C series 26:2600mm 2:FC 2: APC

D:D series 3:LC Duplex

E:Open Frame 4:ST

Product Specifications N-ODU-XXXXXX Optical Distribution Unit



Page 1 of 5 H101310GM006

Features

Universal installation

ODF and IDF installable

19” rack mountable

Flexible cell capacity (24F, 36F, 48F, 72F, 96F)

Optional interface (SC/PC, SC/APC, FC/PC, FC/APC, ST/PC,

LC/UPC, MU/UPC)

Sliding splice tray configuration

Cable patching guider

Easy-access design (All-front operation)

Applications

FTTx central office

Data Center

Long-distance optical transmission network

Optical aaccess network

Video transmission network

Data communication network

Operation Conditions

Transport and Storage temperature：-40℃ - +70℃

Operation temperature：-10℃ - +50℃

Relative humidity：≤85％(+30℃)

Atmosphere pressure：70 kPa -106 kPa




Page 2 of 5 H101310GM006

Figures

24-Fiber ODU

36-Fiber ODU

48-Fiber ODU




Page 3 of 5 H101310GM006

72-Fiber ODU

96-Fiber ODU

Stainless steel gemel Outlet cable Protection-slot




Page 4 of 5 H101310GM006

Side-glance figure

12-Fiber Splice Tray

Inlet cable fixer Front door locker

Cable central strength member holder




Page 5 of 5 H101310GM006

Specifications

Item P/N Size（mm） Capacity（fiber） 1 N-ODU-2024XXX 483×300×88(2HU) ≤24 2 N-ODU-3036XXX 483×300×130(3HU) ≤36 3 N-ODU-4048XXX 483×300×130(3HU) ≤48 4 N-ODU-6072XXX 483×300×175(4HU) ≤72 5 N-ODU-8096XXX 483×300×265(6HU) ≤96


Netop ID Tray counts Port counts Adapter type Interface Pigtail Loaded X XXX X X X N-ODU- 2: 2pcs 000:Null 0: Null 0: Null 0: without pigtail 3: 3pcs 1: SC 1: UPC 1: with 0.9mm pigtails 4: 4pcs 2: FC 2: APC 6: 6pcs 3: LC Duplex 8: 8pcs 4: ST

Product Specifications FBT Splitter Module



Page 1 of 3 H101710DF070N

T-TQ

233_

R07

/4.0

Product Summary

Fused splitter is built by asymmetric coupling technique. The operating bandwidth of this normal coupler is expanding

to ±40nm, and the ultra broadband coupler is expanding to ±80nm. The fused splitter has the same coupling ratio on

both 1310nm and 1550nm communication windows, and with low excess loss and low PDL. Fused splitters are

widely used for communication systems, CATV, and FTTH.

Features Low excess loss

Low PDL

Dual operating window

High stability and reliability

Multiple Splitting ratio for select

Fused Splitter Applications

Optical communication systems

DWDM Network

High-speed LAN

Optical Fiber Sensor

CATV

FTTH

Fused Splitter Module





T-TQ

233_

R07

/4.0

Specifications

SM Dual/Triple Window Fused Splitter

Grade P A

Excess Loss(Typ.)(dB) 0.10 0.15

I.L max.(dB) 3.6 3.8

Uniformity(dB) 0.7 1.0

PDL(dB) 0.10 0.15

Operating

Wavelength(nm)

1310/1550±40,1310±40&1490±10,

1310/1550±40 &1490±10

or Customized

Ratio(％) 50/50

Directivity(dB) ≥55

Operating Temp.(℃) -20~+70

Storage Temp. (℃) -40~+85

I/O Window 1x2 or 2x2

Package Size(mm) A ,B,C,D,M

A：3mm x 35mm Stainless steel tube

B：5mm x 70mm Stainless steel tube

C：3mm x 35mm Stainless steel tube

D：90mm x 20mm x 9.5mm Plastic box

E：100mm x 80mm x 10mm Plastic box

F：141mm x 115mm x 18mm Plastic box

M：3mm x 35mm Stainless steel tube

Ratio / Insertion Loss

Ratio (%) Insertion Loss(dB)

Grade P A

40/60 4.7/2.7 5.0/2.9

30/70 6.0/1.9 6.4/2.1

20/80 7.9/1.2 8.5/1.4

10/90 11.3/0.6 12.7/0.8

05/95 14.0/0.45 17.5/0.5

01/99 19~21/0.1~0.2 21.5/0.25





T-TQ

233_

R07

/4.0

Order Information

FBT Splitter

FBT Splitter Input Port Output Port _ Fiber Type Coupling Ratio Pigtail Type Fiber Length

N-FS X XX X XX X XX

1: 1port 02: 2ports 1: 50/125um 10: 10:90 1: 250um 10: 1.0m

2: 2port 03: 3ports 2: 62.5/125um 20: 20:80 2: 900um 15: 1.5m

04: 4ports 3: 9/125um 30: 30:70 Customized

08: 8ports 40: 40:60

09: 9ports 50: 50:50

10: 10ports Customized

FBT Splitter Module

FBT

Splitter

Module

Input

Port

Output

Port _ Fiber Type Wavelength

Coupling

Ratio Pigtail

Type

Fiber

Length Connector/

adaptor

Connector

Surface Module type

N-FSM X XX X XX XX X XX X X X

1:

1port

02:

2ports

1:

50/125um 08: 850nm 10: 10:90

0:

adaptor00: Null 0: Null 0: Null

A: Plastic

Module

2:

2ports

03:

3ports

2:

62.5/125um 13: 1310nm 20: 20:80

1:

900um10: 1.0m 1: SC 1: UPC

B: Metal

Module

04:

4ports

3: 9/125um 14: 1490nm 30: 30:70

2:

2.0mm15: 1.5m 2: FC 2: APC

C: 19"

rack-mount

08:

8ports

15: 1550nm 40: 40:60

3:

3.0mmCustomized 3: LC

D:

wall-mount

09:

9ports

34:

1310/1490nm45: 45:55 4: ST

10:

10ports

35:

1310/1550nm50: 50:50

Customized A: Average

Customized

Product Specifications Splitter Distribution Cabinet



Page 1 of 5 H101310XD064

Applications These series products provide a high density splitting and distribution management of optical fiber cable. The

advanced design of double-sided operation and divided management make the operation and maintenance very

easy. The modularization-design supports the splitter-module for 2x16, 2x32 and more splitting-rate module. So it’s

easy to update the network.

384F Double-Side Outdoor SDC Features and functions - Body case is made of high-quality steel sheet, surface plastic spray

- Double-sided operation(front and rear), divided management


- Whole hinge lock, fixed with three points


- Max fiber capacity: 384

- Supports up to 12pcs 1×32 (2×32) splitter modules or 24pcs 1×16 splitter modules

- Parking lot accommodates up to 288 splitter output ports

- Supports pre-connected cable or splicing cable

- Provides the fixture and grounding device for 6 outdoor cables

- Dimension(mm): 1200×600×320

SDC-111B384




Page 2 of 5 H101310XD064

192F Double-Side Outdoor SDC Features and functions - Body case is made of high-quality steel sheet, surface plastic spray

- Double-sided operation(front and rear), divided management









- Dimension(mm): 900×600×300

SDC-111B192




Page 3 of 5 H101310XD064

144F Single-Side Outdoor SDC Features and functions - Body case is made of high-quality steel sheet, surface plastic spray

- Single-sided operation with middle activity operation panel








- Provides the fixture and grounding device for 12 outdoor cables Max.

- Dimension(mm): 1000×600×300

SDC-111A144

Splitter Module

Splitter Distribution

Parking Lot

Splice Tray Box with SC Adaptors

Middle Activity Operation Panel




Page 4 of 5 H101310XD064

32F Single-Side Outdoor SDC Features and functions - Body case is made of high-quality steel sheet, surface plastic spray

- Single door, front operation, divided management





- Supports up to 1pc 1×32 (2×32) splitter modules or 2pcs 1×16 splitter modules




- Dimension(mm): 500×480×110

SDC-111A032




Page 5 of 5 H101310XD064


Netop ID Environment Adapter type

Interface Cabinet material

Operation Type

Installation Max. distribution capacity

Pigtail Loaded

N-SDC- X X X X X X XXX X

1:Outdoor 1: SC simplex

1: UPC 1:SPCC A: Single face

1: Wall mount 032 0: without pigtail

2:Indoor 2: SC duplex

2: APC 2:Stainless steel

B: Double face

2: Free-standing

072 1: with 0.9mm pigtails

3: LC simplex

3:SMC 144 With customerized pigtails

4: LC duplex

192

5: FC Simplex

288

384

Product Specifications Fast Termination Connector



Page 1 of 5 NT-

TQ23

3_R

07/4

.0

H101710DF099

Application FTTH, FTTD, FTTO

Rebuilding the wiring in optical equipment rooms

Core Splice Technology

Pluggable non-preset stub technology Coaxial aligning of precision ceramics

Axial elastically fitting of optical fiber Multi-point fastener

Inner structure




Page 2 of 5 NT-

TQ23

3_R

07/4

.0

H101710DF099

Field Assembly Connector Construction Features

Based on the unique Rosenberger pluggable non-preset tube technology

Precision ceramic components with co-axial self centering, excellent and durable optical property

Optical fiber fits axially in elastic way and avoids completely any false connect

Triple clamping through the naked fiber, tight buffer and cable, etc., can be used as patchcord

High on-line tensile strength of Optical Fast Connector after terminating, always keep connecting under the

force from cabling and drawing

Integrated protection of the casing to withstand harsh user environment

Directly connectable with ONU without any optical socket which reduces FTTH cost

High success rate and easiness in installation with average splicing time 100 sec

Lower requirement for the habit working and work environment call for to the builder

Visible Installation quality; independent from any far end light source and special device satisfying cabling

construction in any sectioned way.




Page 3 of 5 NT-

TQ23

3_R

07/4

.0

H101710DF099

SC Series

N-FC-C2SCUA N-FC-C9SCUA

N-FC-C3SCUA N-FC-SFSCUA

FC Series

N-FC-C2FCUA N-FC-C9FCUA

N-FC-SFFCUA N-FC-C3FCUA




Page 4 of 5 NT-

TQ23

3_R

07/4

.0

H101710DF099

Installation Tool

Figure -8 drop cable stripper P250 Coat Stripper

Clamp for N-FC-SFSCUA Clamp for RFT-SC

Clamp for N-FC-SFFCUA Clamp for RFT-FC




Page 5 of 5 NT-

TQ23

3_R

07/4

.0

H101710DF099

Specification

Item Technical Parameters

Fiber mode Single-mode & Multi-mode

Operation time About 120s (no fiber cut)

Insert loss ≤ 0.3dB (1310nm & 1550nm)

Return loss ≤ -40dB

Fastening strength of naked fiber > 5 N

Fastening strength of naked fiber holder > 10 N

Tensile strength > 50 N

Operating temperature -40～+75℃

On-line tensile strength (20 N) △ IL ≤ 0.2dB △ RL ≤ 5dB

Mechanical durability (500 times) △ IL ≤ 0.2dB △ RL ≤ 5dB

Drop-off test (drop-off height 4m,

once per direction, totally 3 times)

△ IL ≤ 0.2dB △ RL ≤ 5dB


Part Number Description

N-FC-C2SCUA Fast-Termination Connector, SC, for 250um buffered fiber

N-FC-C9SCUA Fast-Termination Connector, SC, for 900um buffered fiber

N-FC-SFSCUA Fast-Termination Connector, SC, for 3.1x2.0mm figure-8 drop cable

N-FC-C3SCUA Fast-Termination Connector, SC, for 3.0mm/2.0mm drop cable

N-FC-C2FCUA Fast-Termination Connector, FC, for 250um fiber

N-FC-C9FCUA Fast-Termination Connector, FC, for 900um fiber

N-FC-SFFCUA Fast-Termination Connector, FC, for 3.1x2.0mm figure-8 drop cable

N-FC-C3FCUA Fast-Termination Connector, FC, for 3.0mm/2.0mm drop cable

Product Specifications Fiber Optic Adapter/Coupler



Page 1 of 4 NT-

TQ23

3_R

07/4

.0

H101710DF043

FC Adapter

Features

Comply with IEC 61754-13

Adapter housing material:

Nickel-plated metal

Adapter C-sleeve material:

Ceramic

Installation:

Square or D-D mounting flange

Key dimension:

Wide-key (2.15mm) or narrow-key (2.05mm)

Performance

Insertion Loss:

<= 0.2dB against reference connectors

Operating Temperature:

-40℃ ~ +70℃

Square Flange

Round Flange

Hexagonal Flange




Page 2 of 4 NT-

TQ23

3_R

07/4

.0

H101710DF043


Part Number Description

N-98E-14 FC/PC simplex adapter, D-D style, round flange

N-98E-15 FC/PC simplex adapter, square flange

N-98E-39 FC/APC simplex adapter, narrow key 2.03~2.08mm

N-98E-53 FC/PC simplex adapter, D-D style, 6-sides

Square Flange

Round Flange

Hexagonal Flange




Page 3 of 4 NT-

TQ23

3_R

07/4

.0

H101710DF043

SC Adapter

Features

Comply with IEC 61754-4, 60874-14

Adapter variants:

simplex and duplex

Adapter housing material: Composite plastic or

nickel-plated metal

Adapter C-sleeve material: Ceramic

Color rule for composite plastic adapter: blue - SM,

beige – MM, green – SM APC

Installation: with or without mounting flange

Performance

Insertion Loss: <= 0.2dB against reference connectors

Operating Temperature: -40℃ ~ +70℃


Part Number Description Part Number Description

N-98E-08 SC/PC MM simplex adapter, beige 98E-36 SC SM/MM duplex adapter, metal house

N-98E-09 SC/PC MM simplex adapter, blue 98E-40 SC/APC simplex adapter, green

N-98E-10 SC/PC MM duplex adapter, beige 98E-46 SC/PC,SM duplex adapter without flange

N-98E-11 SC/PC SM duplex adapter, blue 98E-47 SC/PC,MM duplex adapter without flange

N-98E-23 SC/PC SM simplex adapter, round flange 98E-65 SC/PC simplex adapter, metal housing




Page 4 of 4 NT-

TQ23

3_R

07/4

.0

H101710DF043

LC Adapter Features

Comply with IEC 61754-20,GR-326-CORE,

Adapter variants: simplex and duplex and quad

Adapter housing material: Composite plastic or nickel-plated metal

Adapter C-sleeve material: Ceramic

Color rule for composite plastic adapter: blue - SM, beige – MM,

Green – SM APC

Installation: With or without mounting flange

Performance

Insertion Loss: <= 0.2dB against reference connectors

Operating Temperature: -40℃ ~ +75℃


Part Number Description Part Number Description

N-98E-01 LC/PC MM duplex adapter, beige 98E-48 LC/PC,SM simplex adapter, blue

N-98E-02 LC/PC SM duplex adapter, blue 98E-49 LC/PC,MM simplex adapter, beige

N-98E-32 LC MM duplex adapter, snap-latch fixing 98E-50 LC/PC,SM duplex adapter, hole fixing

N-98E-31 LC SM duplex adapter, snap-latch fixing 98E-66 LC, MM, Quad adapter

Product Specifications Fiber Optic Patchcord & Pigtail




T-TQ

233_

R07

/4.0

Features

Available for all common types of connectivity systems

Cable options:

0.9mm buffered fiber

1.6-2.0mm simplex/duplex cable

2.9mm simplex/duplex cable

Other cable adoptions upon request

Connector options: Simplex and duplex

Fiber options:

Single-mode 9/125um, multi-mode 50/125um, 62.5/125um

and OM3/OM4 (LOF 50/125um)

LC comply with IEC 61754-20

SC comply with TIA/EIA 568, IEC 874-10

FC comply with IEC 60874-7

ST comply with TIA/EIA 568, IEC 874-14

MU comply with IEC 61754-6

MTRJ comply with TIA/EIA-604-12 and IEC61754-18

DIN comply with IEC 61754-3

ESCON is a registered trademark of IBM

Insertion loss test acc. to IEC 61300-3-4

Return loss test acc. to IEC 61300-3-6

Operation temperature: -20℃ ~ +70℃

Single-Mode Connector Endface IL Typical IL Maximum RL Typical RL Maximum

SC/FC/ST/LC/MU/DIN Ultra (UPC) 0.25 dB 0.40 dB -55 dB -45dB

Angle (APC) 0.25 dB 0.40 dB -65 dB -60dB

MTRJ Ultra (UPC) 0.35 dB 0.60 dB -35dB

MTP Angle (APC) 0.25 dB 0.60 dB -55dB -55dB

Multi-Mode Connector Endface

SC/FC/ST/LC/MU/DIN Ultra (UPC) 0.25 dB 0.40 dB

MTRJ Ultra (UPC) 0.35 dB 0.60 dB

MTP Super (SPC) 0.25 dB 0.45 dB





T-TQ

233_

R07

/4.0

Delivery Form Single item in foil bag

One product ID label with measurement values per patchcord

Serial number label on patchcord

Ordering Information Netop fiber optic patchcords and pigtails are ordered with part number “N-98C” by following additional eight characters as defined by digit 1 through digit 8: Digit 1 - Fiber cable type, Digit 2 - Cable diameter, Digit 3 – Cable structure, Digit 4 - Polished connector endface for SM or core diameter for MM, Digit 5 & Digit 6 - Connector type, Digit 7 - Unit of Measurement and Digit 8 - Cable assembly length. Single-mode Patch cord or Pigtail N-98C X X X X X X X XXXX Digit1 Digit2 Digit3 Digit4 Digit5 Digit6 Digit7 Digit8

X X X X X X X XXXX

S: SM Riser 2: 2mm 0: pigtail 1: UPC-UPC 1: ST 1: ST

E: SM LSZH 3: 3mm 1: patchcord 2: Null 2: SC 2: SC M : meter

Cable length

XXX.X meter

I: SM Plenum 6: 1.6mm 2: Duplex pigtail 3: APC-APC 3: FC 3: FC

8: 1.8mm 3: Duplex patchcord 4: PC-APC 4: LC 4: LC F: feet

Cable length

XXX.X feet P: SM G655

(Riser) 9: 0.9mm 5: APC-PC 5: MU 5: MU

Z: SM G657A

(LSZH)

4: Duplex pigtail

(separately) 6: MT-RJ(F) 6: MT-RJ(F)

7: MT-RJ(M) 7: MT-RJ(M)

5: Duplex patchcord

(separately) 8: MTP(F) 8: MTP(F)

9: E2000 9: E2000

A: FSMA A: FSMA

B: MTP(M) B: MTP(M)

C: ESCON C: ESCON

D: SCDC D: SCDC

N-98C

E: DIN E: DIN





T-TQ

233_

R07

/4.0

Multi-mode Patch cord or Pigtail N-98C X X X X X X X XXXX Digit1 Digit2 Digit3 Digit4 Digit5 Digit6 Digit7 Digit8

X X X X X X X XXXX

M: MM Riser 2: 2mm 0: pigtail 5: 50/125 1: ST 1: ST

F: MM LSZH 3: 3mm 1: patchcord 6: 62.5/125 2: SC 2: SC M: meter

Cable length

XXX.X meter

J: MM Plenum 6: 1.6mm 2: Duplex pigtail 7: 100/140 3: FC 3: FC

8: 1.8mm 3: Duplex patchcord 4: LC 4: LC F: feet

Cable length

XXX.X feet G: 10G Riser

(LT=300m) 9: 0.9mm 5: MU 5: MU

4: Duplex pigtail


H: 10G LSZH

(LT=300m) 7: MT-RJ(M) 7: MT-RJ(M)

5: Duplex patchcord

(separately) 8: MTP(F) 8: MTP(F) N: 10G Plenum

(LT=300m) 9: E2000 9: E2000

A: FSMA A: FSMA Q: 10G Riser

(LT=150m) B: MTP(M) B: MTP(M)

C: ESCON C: ESCON R: 10G LSZH

(LT=150m) D: SCDC D: SCDC

N-98C

T: 10G Plenum

(LT=150m)

E: DIN E: DIN

Single-mode Patch cord or Pigtail (Multi-fiber) N-98C X X X X X X X XXXX Digit1 Digit2 Digit3 Digit4 Digit5 Digit6 Digit7 Digit8

X X X X X X X XXXX

A: SM ribbon A: 2 core 0: pigtail 1: UPC-UPC 1: ST 1: ST

C:SM breakout B: 4 core 1: patchcord 2: Null 2: SC 2: SC M: meter

Cable length

XXX.X meter

C: 6 core 2: Duplex pigtail 3: APC-APC 3: FC 3: FC

D: 8 core 3: Duplex patchcord 4: PC-APC 4: LC 4: LC F: feet

Cable length

XXX.X feet

E: 12 core 5: APC-PC 5: MU 5: MU

F: 24 core

4: Duplex pigtail


G:36 core 7: MT-RJ(M) 7: MT-RJ(M)

H:48 core

5: Duplex patchcord


9: E2000 9: E2000

A: FSMA A: FSMA

B: MTP(M) B: MTP(M)

C: ESCON C: ESCON

D: SCDC D: SCDC

N-98C

E: DIN E: DIN





T-TQ

233_

R07

/4.0

Multi-mode Patch cord or Pigtail (Multi-fiber) N-98C X X X X X X X XXXX Digit1 Digit2 Digit3 Digit4 Digit5 Digit6 Digit7 Digit8

X X X X X X X XXXX

B: MM ribbon A: 2 core 0: pigtail 5: 50/125 1: ST 1: ST

D:MM breakout B: 4 core 1: patchcord 6: 62.5/125 2: SC 2: SC M: meter

Cable length

XXX.X meter

C: 6 core 2: Duplex pigtail 7: 100/140 3: FC 3: FC

D: 8 core 3: Duplex patchcord 4: LC 4: LC F: feet

Cable length

XXX.X feet

E: 12 core 5: MU 5: MU

F: 24 core

4: Duplex pigtail


G:36 core 7: MT-RJ(M) 7: MT-RJ(M)

H:48 core

5: Duplex patchcord


9: E2000 9: E2000

A: FSMA A: FSMA

B: MTP(M) B: MTP(M)

C: ESCON C: ESCON

D: SCDC D: SCDC

N-98C

E: DIN E: DIN

Product Specifications Fixed Fiber Optic Attenuator



Page 1 of 2 H101710DF044

Properties

Stable attenuation

High return loss

Environmentally stable

Easy installation

Customer designed attenuation specifications

All fiber construction

Build-out and in-line type available

Low attenuation tolerance

Low wavelength dependency

Performance

Plug type Attenuator Male/Female Type

Return loss: UPC>55dB, APC>65dB

Attenuation Tolerance: ±0.45dB(<5dB) / ±9%(≥5dB)

Operating Wavelength: Dual-window 1310/1550±25nm

Connector type: FC, SC, ST, MU, LC

In-line Attenuator (Attenuated Patch Cord) Fiber Type: Single Mode

Attenuation: 5～20 dB

Bandwidth: ±40nm(at 1310nm and 1550nm window)

Attenuation tolerance (without connectors):

±0.5dB(5-10dB) at 1310nm and 1550nm window

±0.8dB(11-20dB) at 1310nm and 1550nm window

Connector loss: 0.20dB typical

Return loss (without connectors): ≥50dB

Connector Type: FC, SC, ST, LC, MU

Cable type: 250um, 900um, 2.0mm, 3.0mm PVC or LSZH

Cable Length: Customer specified

Metal tube dimension: Diameter≤4mm, Length≤80mm.

Product Specifications Fixed Fiber Optic Attenuator



Page 2 of 2 H101710DF044


X X X X XXX - XXX

Part Type Cable type Wavelength Connector Cable Length Attenuation

0= Plug type

0=

Build-out-attenuator

0=

Build-out-attenuator 1=SC/UPC XX.X Meter 001=1 dB

1= In-line type 1=250um SM 1=850nm 2=FC/UPC 002=2 dB

2=900um SM 2=1310nm 3=ST/UPC 003=3 dB

3=2.0mm SM 3=1550nm 4=FC/APC 004=4 dB

4=3.0mm SM 4=1310/1550nm 5=SC/APC 005=5 dB

5=250um 50u 6=D4/UPC 006=6 dB

6=900um 50u 7=LC/APC 007=7 dB

7=2.0mm 50u 8=LC/UPC 008=8 dB

8=3.0mm 50u 9=MU/UPC 009=9 dB

9=250um 62.5u 010=10 dB

A=900um 62.5u ……

B=2.0mm 62.5u

N-98D

C=3.0mm 62.5u 015= 15 dB

Eg: N-98D0001-001 is the Order Number for 1dB SC/UPC Build-out-attenuator

Product Specifications N-10xabc-1A Fiber Distribution Panel



H101310JS021NT-

TQ23

3_R

07/4

.0

Features

Suitable for all common types of factory or

on-site assembled OF cables with excellent

performance and easy installation

Compatible with all factory assembled

PREConnect® cabling system

High reliability

High flexibility

High integrated design

Applications

ISO / IEC 8802-3: FOIRL

ISO / IEC 8802-3: 10BASE-FL, FP & FB

ISO / IEC TR 11802-4: 4 & 16 Mbit/s Token Ring

ISO / IEC 8802-5t: 100 Mbit/s Token Ring

ISO / IEC 8802-12: Demand Priority

ATM at 52Mbit/s

ATM at 155Mbit/s

ATM at 622Mbit/s

DIS 14165-111: Fibre Channel (FC-PH) at 133 Mbit/s




ISO / IEC 8802-3: 1000BASE-SX

ISO / IEC 8802-3: 1000BASE-LX

ISO / IEC 9314-9: FDDI LCF-PMD

ISO / IEC 9314-4: FDDI SMF-PMD

EN ISO / IEC 9314-3: FDDI PMD

ISO / IEC 8802-3: 100BASE-FX

IEEE 802.3: 10GBASE-LX4

IEEE 802.3: 10GBASE-ER/EW

IEEE 802.3: 10GBASE-SR/SW

IEEE 802.3: 10GBASE-LR/LW




H101310JS021NT-

TQ23

3_R

07/4

.0

Specifications

Dimensions:

1HU Fixed Distribution Panel 483 x 250 x 1HU

2HU Fixed Distribution Panel 483 x 250 x 2HU

1HU Telescopic Distribution Panel 483 x 300 x 1HU

2HU Telescopic Distribution Panel 483 x 300 x 2HU

Twist and pull secure cable supports for PREConnect® trunk cable dividers

2 PG21 (29mm) cable inputs

Cable guidance 45°slant backwards and lead-way choice

4 cable clamping slot cap and divider slot cap

2 universal supports for simplex, duplex and break-out-cables mountable

Mountable Screen print front plate labeling:

1 to 4 or 1 to 12 or 1 to 16 or 1 to 24 or 1 to 32 or 1 to 48 for 1HU

1 to 24 or 1 to 32 or 1 to 36 or 1 to 48 or 1 to 64 for 2HU Outline Drawing

Fixed Distribution Panel Telescopic Distribution Panel




H101310JS021NT-

TQ23

3_R

07/4

.0

Ordering Information Fixed Distribution Panel

N-101165-1A 1 HU Fixed Distribution Panel, SC/SC simplex SM, 8 Fibers, Black





Telescopic Distribution Panel

N-103165-1A 1 HU Telescopic Distribution Panel, SC/SC simplex SM, 8 Fibers, Black



N-103G65-1A 1 HU Telescopic Distribution Panel, SC/SC/APC simplex SM, 8 Fibers, Black




N-107G45-1A 1 HU Telescopic Distribution Panel, SC/SC/APC simplex SM, 48 Fibers, Black Part Number Options: N-10xabc-1A x-Height 1 - 1HU Fixed, 3 - 1HU Telescopic, 5 - 2HU Fixed, 7 - 2HU Telescopic

a-Adaptor

1: SC/SC Simplex SM, 2: ST/ST Simplex SM, 3: ST/ST Duplex SM, 4: SC/SC Simplex MM,

5: SC/SC Duplex SM, 6: SC/SC Duplex MM, 7: SC/ST Duplex SM, 8: SC/ST Duplex MM,

9: ESCON/ST MM, A: MT-RJ/MT-RJ SM, B: MT-RJ/MT-RJ MM, C: LC/LC Duplex SM,

D: LC/LC Duplex MM, E: FC/FC Simplex, G: SC/APC Simplex, H: DIN/DIN, K: E2000/APC

b-Fibers

1: 0 Fiber, 2: 12 Fibers, 3: 24 Fibers, 4: 48 Fibers, 5: 16 Fibers, 6: 8 Fibers, 7: 32 Fibers, 8: 4 Fibers,

9: 256 Fibers, A: 288 Fibers, B: 512 Fibers, C: 6 Fibers, D: 36 Fibers, E: 72 Fibers, F: 96 Fibers

c-Color 5: Black

1A-Meterial Steel body & front plate structure

Product Specifications N-10xabc-1A Fiber Splice Panel



H101310JS022NT-

TQ23

3_R

07/4

.0

Features

Suit for all common types of factory or on-site assembled OF

cables with excellent performance and easy installation

High reliability

High flexibility

High integrated design

Applications

ISO / IEC 8802-3:FOIRL

ISO / IEC 8802-3:10BASE-FL, FP & FB




ATM at 52Mbit/s

ATM at 155Mbit/s

ATM at 622Mbit/s

DIS 14165-111:Fibre Channel (FC-PH) at 133 Mbit/s




ISO / IEC 8802-3:1000BASE-SX


ISO / IEC 9314-9:FDDI LCF-PMD

ISO / IEC 9314-4:FDDI SMF-PMD







Specifications

Dimensions:

1HU Fixed Splice Panel 483 x 250 x 1HU


1HU Telescopic Splice Panel 483 x 300 x 1HU

2HU Telescopic Splice Panel 483 x 300 x 2HU

Twist secure supports for max. 2 splice cassettes (1HU)

Twist secure supports for max. 4 splice cassettes (2HU)

4 cable clamping slot cap and divider slot cap

2 PG21 (29mm) cable inputs

Cable guidance 45°slant backwards and lead-way choice

2 universal supports for simplex, duplex and break-out-cables

Mountable Screen print front plate labeling:

1 to 4 or 1 to 12 or 1 to 16 or 1 to 24 or 1 to 32 or 1 to 48 for 1HU

1 to 24 or 1 to 32 or 1 to 36 or 1 to 48 or 1 to 64 for 2HU,




H101310JS022NT-

TQ23

3_R

07/4

.0

Outline Drawing

Fixed Splice Panel Telescopic Splice Panel




H101310JS022NT-

TQ23

3_R

07/4

.0

Ordering Information Fixed Splice Panel

N-102165-1A 1 HU Fixed Splice Panel, SC/SC simplex SM, 8 Fibers, Black





Telescopic Splice Panel

N-104165-1A 1 HU Telescopic Splice Panel, SC/SC simplex SM, 8 Fibers, Black



N-104G65-1A 1 HU Telescopic Splice Panel, SC/SC/APC simplex SM, 8 Fibers, Black




N-108G45-1A 1 HU Telescopic Splice Panel, SC/SC/APC simplex SM, 48 Fibers, Black Part Number: N-10xabc-1A

x-Height 2: 1HU Fixed, 4: 1HU Telescopic, 6: 2 HU Fixed, 8: 2HU Telescopic, A: 3 HU Fixed, H: 4HU Fixed

a-Adaptor

1: SC/SC Simplex SM, 2: ST/ST Simplex SM, 3: ST/ST Duplex SM, 4: SC/SC Simplex MM,

5: SC/SC Duplex SM, 6: SC/SC Duplex MM, 7: SC/ST Duplex SM, 8: SC/ST Duplex MM,


D: LC/LC Duplex MM, E FC/FC Simplex, F: Blank, G: SC/APC Simplex, H: DIN/DIN, K: E2000/APC

b-Fibers

1: 0 Fiber, 2: 12 Fibers, 3: 24 Fibers, 4: 48 Fibers, 5: 16 Fibers, 6: 8 Fibers, 7: 32 Fibers, 8: 4 Fibers,

9: 256 Fibers, A: 288 Fibers, B: 512 Fibers, C: 6 Fibers, D: 36 Fibers, E: 72 Fibers, F: 96 Fibers

c-Color 5: Black

1A-Meterial 1A: Steel body & front plate

Product Specifications Ultra-Flexible Fiber Patch Cord



Page 1 of 2

NT-

TQ23

3_R

07/4

.0

H101310DF110

Overview

Netop ultra-flexible fiber patch cord features small bending radius and super flexible and durable cables, which is specifically

suitable for FTTH applications.

Cable Sstructure

Mechanical and Transmission Data

Product Specifications Ultra-Flexible Fiber Patch Cord



Page 2 of 2

NT-

TQ23

3_R

07/4

.0

H101310DF110

Connector Performance

LC comply with IEC 61754-20

SC comply with TIA/EIA 568, IEC 874-10

Insertion loss tested acc. to IEC 61300-3-4

Return loss tested acc. to IEC 61300-3-6

Operation temperature: -25℃ ~ +70℃

Single Mode IL Typical IL Maximum RL Typical RL Maximum

SC, LC Ultra (UPC) < 0.20 dB 0.30 dB < -55 dB -45 dB

Angle (APC) < 0.20 dB 0.30 dB < -65 dB -60 dB

Delivery Form

Single item in foil bag

One product ID label with measurement values per patch cord

Serial number label on patch cord


Netop ID Fiber Type Fiber Cable Diameter Product Type Interface A Interface B Units Length

N-SPC- X X X X X X XXX

A: G652D A: 2.0mm armorerd cable 1: pigtail 0: Null 0: Null M: meter XX.X

B: G657A B: 3.0mm armorerd cable 2: patchcord 1: SC/APC 1: SC/APC F: feet

C: G657B C: 4.0mm Ultru-flexible cable 2: SC/UPC 2: SC/UPC

D: figure-8 drop cable 3: LC/APC 3: LC/APC

E: figure-8 aerial drop cable 4: LC/UPC 4: LC/UPC

5: FC/APC 5: FC/APC

6: FC/UPC 6: FC/UPC

Netop Fttx-oDN techNologies

Design, manufacture and deploy worldwide RF and fiber optic total solutions • for telecommunication networksCreate value for our customers through innovative products, customized • services and cost effective solutionsHighest quality standards, state-of-the-art manufacturing facilities and reliable • supply chain management to achieve and exceed customer expectationsSocially responsible to our community and environment we do business in • and committed to employee's personnel development

Value Innovation•

Customer Focus•

Sustainable Growth•

Social Responsibility•

MISSION STATEMENT

CORE VALUE

NETOP COMPANY OVERVIEW

Netop is an international company devoted to providing the total "end-to-end" solution for enabling wireless coverage & optimizing telecommunication networks. We are a modern and dynamic company involved in both site and in-building wireless coverage business, as well as the fiber optic infrastructure business. Netop has capabilities in R&D, manufacturing, logistics and on-site services.

Netop provides both off-the-shelf and customized products for our customers.

Our major offerings include:1) Total Site Solutions 2) In-building Wireless Coverage Solutions3) Customized Components for OEM Customers4) Microwave and Satellite Communication Systems5) Netop Cable Systems6) FTTx-ODN Technologies7) Telecom/OSP Fiber Solutions

Our technical competencies are protected with patents and our products adhere to the highest technical standards.

Netop production base is located in Qingpu Industrial Park, Shanghai. The factory has over 14,000 sqm production facilities with more than 800 employees.

To keep up with technological advancements, our R&D center in the United States is at the heart of technical innovations. We strive to be at the forefront of technology.

Netop also has an expansive sales and marketing network throughout the world. We have over 20 subsidiaries covering Asia Pacific, the Middle East, Africa, Europe and the Americas. Hence, we are able to be in constant contact with our local customers providing them with timely and quality services.

CONTENT

Netop eNd-to-eNd Fttx-odN SolutioN 6

CeNtral oFFiCe SyStem 8Optical Distribution Frame 9

Fiber Splicing and Distribution Patch Panel 13

Feeder CaBle SyStem 16Feeder Cable 17

Fiber Joint Enclosure 24

Fiber Joint Enclosure for Splitter 28

Optical Cable Cross Connecting Cabinet 32

FiBer diStriButioN SyStem 36Splitter Distribution Cabinet 37

Distribution Cable 41

drop CaBle SyStem 46Optical Fiber Distribution Unit 47

Drop Cable for FTTH 51

FiBer termiNatioN SyStem 56Outdoor Optical Terminal Box 57

Fiber Faceplate Box 59

Field-installable Fiber Optic Connector 62

paSSiVe optiCal CompoNeNt 64Optical Splitter 65

Optical Fiber Patch Cord 68

Optical Fiber Adapter and Connector 71

NETOP ENd-TO-ENd FTTx-OdN SOLUTION

Along with the fast deployment of fiber-to-the-x technology and its application worldwide Netop Technology offers an end-to-end infrastructure solution for central office (CO), optical distribution network (ODN) and last-mile architecture. Netop’s broad selection of optical fiber products and end-to-end EPON, BPON and GPON solutions can be customized for your specific next-generation network requirements. Netop’s structural and modular products and configurations can not only meet your present demand, but also support your future life needs in a cost-effective way.

Optical Distribution Network (ODN) is a physical connectivity platform for next-generation broadband and gigabit access network. Netop Technology provides diversified products to build an ODN of high performance and reliability, as well as to provide service of network planning and consultation, and installation supports. Netop offers the highest quality products including Netop fiber optical cables, optical distribution frames (ODF), splitter distribution cabinets (SDC), passive splitters and fiber optic jumpers, specialized drop fiber cable and customer interface box.

End-to-end FTTx-ODN Solutions

End-to-end FTTx-ODN Solutions

The System of Central Office Includes the Following Products:Optical Distribution Frame 9Fiber Splicing and Distribution Patch Panel 13

CENTRAL OFFICE SYSTEM

OPTICAL dISTRIbUTION FRAME

The optical distribution frame (ODF) is applied in the center office, optical cross connection point and network access point in fiber access network projects. It provides such functions as leading in, fixing and splicing, protecting optical cables, storing and managing pigtails, fixing and cross-connecting optical fibers, Meanwhile, enabling safe and reliable routing for connection, distribution and scheduling between optical systems in telecom networks.

Order Information

Netop id Frame type Frame Height Adapter Type Interface Port Count Pigtail LoadedX XX X X XXX X

N-ODF- A:A series 20:2000mm 0:Null 0: Null 000:Null 0: Without pigtail

B:B series 22:2200mm 1:SC 1: UPC 1: With 0.9mm pigtail

C:C series 26:2600mm 2:FC 2: APC

D:CⅡ series 3:LC

E:Open frame

Product Overview1

10

Net

op F

TTx-

OD

N T

echn

olog

ies

Optical Distribution Frame A

FeatureSuit for connect outside optical cables with optical transmission equipment• Convenient operation, double side operating• Ability to reconfigure and expand your network• Various interface available SC, FC or LC•

Structural Drawing

SpecificationHigh termination density, maximum 792 fibers• Superior cable management ensure 40mm minimum bend radius• Connector life>1000 times• Connector loss (including Insertion, Change ability and Durability) ≤0.5dB• Change ability≤0.2dB• Durability≤0.1dB• Return loss: PC≥40dB, UPC≥50dB, APC≥60dB• Insulation resistance (between frame and protection • grounding)>1000MΩ/500V (DC)Dielectric strength (between frame and protection grounding)>3000V (DC) /• min, no spark-over and no flashoverOperation temperature: -5• ℃~+40℃

Relative humidity: 85% (+30• ℃)Atmosphere pressure: 70kPa~106kPa•

item type Size mm Capacity fiber

1 N-ODF-A26XXXX 2600×860×300 ≤792

2 N-ODF-A22XXXX 2200×860×300 ≤648

3 N-ODF-A20XXXX 2000×860×300 ≤576

11

Netop FTTx-O

DN

Technologies

Optical Distribution Frame B

FeatureSuit for central offices and cross connection points in the OAN• Convenient operation, double side operating• Ability to reconfigure and expand your network• Various interface available SC, FC or LC•

SpecificationHigh termination density, maximum 936 fibers• Superior cable management ensure 40mm minimum bend radius• Connector life>1000 times• Connector loss (including Insertion, Change ability and Durability) ≤0.5dB• Change ability≤0.2dB• Durability≤0.1dB• Return loss: PC≥40dB, UPC≥50dB, APC≥60dB• Insulation resistance (between frame and protection • grounding)>1000MΩ/500V (DC)Dielectric strength (between frame and protection grounding)>3000V (DC) /• min, no spark-over and no flashoverOperation temperature: -5• ℃~+40℃



1 N-ODF-B26XXXX 2600×800×300 ≤936

2 N-ODF-B22XXXX 2200×800×300 ≤792

3 N-ODF-B20XXXX 2000×800×300 ≤660

12

Net

op F

TTx-

OD

N T

echn

olog

ies

Optical Distribution Frame C

FeatureSuit for trunk transmission and cross connection points of • lower capacity all front accessConvenient operation, double side operating• Ability to reconfigure and expand your network• Various interface available SC, FC or LC•

SpecificationHigh termination density, maximum 384 fibers• Superior cable management ensure 40mm minimum bend • radiusConnector life>1000 times• Connector loss (including Insertion, Change ability and • Durability) ≤0.5dBChange ability≤0.2dB• Durability≤0.1dB• Return loss: PC≥40dB, UPC≥50dB, APC≥60dB• Insulation resistance (between frame and protection • grounding)>1000MΩ/500V (DC)Dielectric strength (between frame and protection • grounding)>3000V (DC) /min, no spark-over and no flashoverOperation temperature: -5• ℃~+40℃



1 N-ODF-C26XXXX 2600×600×300 ≤384

2 N-ODF-C22XXXX 2200×600×300 ≤288

3 N-ODF-C20XXXX 2000×600×300 ≤288

Optical Distribution Frame CⅡ

FeatureSuit for trunk transmission and cross connection points of • lower capacityConvenient operation, double side operating• Ability to reconfigure and expand your network• Various interface available SC, FC or LC•

SpecificationHigh termination density, maximum 192 fibers• Superior cable management ensure 40mm minimum bend • radiusConnector life>1000 times• Connector loss (including Insertion, Change ability and • Durability) ≤0.5dBChange ability≤0.2dB• Durability≤0.1dB• Return loss: PC≥40dB, UPC≥50dB, APC≥60dB• Insulation resistance (between frame and protection • grounding)>1000MΩ/500V (DC)Dielectric strength (between frame and protection • grounding)>3000V (DC) /min, no spark-over and no flashoverOperation temperature: -5• ℃~+40℃



1 N-ODF- CⅡ26XXXX 2600×240×300 ≤192

2 N-ODF- CⅡ22XXXX 2200×240×300 ≤144

3 N-ODF- CⅡ20XXXX 2000×240×300 ≤144

FIbER SPLICING ANd dISTRIbUTION PATCH PANEL

Fiber splicing and distribution patch panel supports the splicing connection, termination and storage of fiber optic cables. Netop supplies various patch panel in both telescopic-type and fixed-type structure by the same time providing all industry-standard coupler interface including SC, FC, ST, LC, MU, MT-RJ, E2000, DIN and etc. The Netop fiber optic patch panel can be integrated into the EIA 19” rack or multi-media cabinet.

Product Overview2

Netop id X-Height and Type Adapter Type Fiber Count panel Color Structure CodeN-10 X X X X X

1: 1HU fixed distribution panel 1: SC/SC simplex SM 1: 0 fiber 0: Metal 1A: Steel body & front

2: 1HU fixed splice panel 2: ST/ST simplex SM 2: 12 fibers 2: Grey

3: 1HU telescopic distribution panel 3: ST/ST duplex SM 3: 24 fibers 3: White 　

4: 1HU telescopic splice panel 4: SC/SC simplex MM 4: 48 fibers 4: Beige 　

5: 2HU fixed distribution panel 5: SC/SC duplex SM 6: 8 fibers 5: Black 　

6: 2HU fixed splice panel 6: SC/SC duplex MM 7: 32 fibers 　　

7: 2HU telescopic distribution panel 7: SC/ST duplex SM 8: 4 fibers 　　

8: 2HU telescopic splice panel 8: SC/ST duplex MM 9: 256 fibers 　　

A: 3HU telescopic splice panel 9: ESCON/ST MM A: 288 fibers 　　

B: 3HU modular splice panel A: MT-RJ/MT-RJ SM B: 512 fibers 　　

C: 1HU modular distribution panel B: MT-RJ/MT-RJ MM, C: 6 fibers 　　

D: 1HU modular splice panel C: LC/LC duplex SM D: 36 fibers 　　

E: 1HU modular splice panel w/label D: LC/LC duplex MM E: 72 fibers 　　

F: 2HU modular splice panel w/label E: FC/FC simplex F: 96 fibers 　　

G: SC/APC simplex 　　

H: DIN/DIN 　　

　 K: E2000/APC 　　　

Order Information

14

Net

op F

TTx-

OD

N T

echn

olog

ies

SpecificationDimensions: •

1HU Fixed Splice panel 483 x 250 x 1HU


1HU Telescopic Splice panel 483 x 300 x 1HU


Twist and pull secure cable supports for Pre-terminated trunk • cable dividers 2 PG21 (29mm) cable inputs• Cable guidance 45°slant backwards, lead-way choice• 4 cable clamping slot cap and divider slot cap• 2 universal supports for simplex, duplex and break-out-cables • Screen print front plate labeling•

ApplicationISO / IEC 8802-3: FOIRL• ISO / IEC 8802-3: 10BASE-FL, FP & FB• ISO / IEC TR 11802-4: 4 & 16 Mbit/s Token Ring• ISO / IEC 8802-5t: 100 Mbit/s Token Ring• ISO / IEC 8802-12: Demand Priority• ATM at 52Mbit/s• ATM at 155Mbit/s• ATM at 622Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 133 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 266 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 531 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 1062 Mbit/s• ISO / IEC 8802-3:1000BASE-SX• ISO / IEC 8802-3: 1000BASE-LX• ISO / IEC 9314-9: FDDI LCF-PMD• ISO / IEC 9314-4: FDDI SMF-PMD• EN ISO / IEC 9314-3: FDDI PMD• ISO / IEC 8802-3: 100BASE-FX• IEEE 802.3: 10GBASE-LX4 • IEEE 802.3: 10GBASE-ER/EW• IEEE 802.3: 10GBASE-SR/SW• IEEE 802.3: 10GBASE-LR/LW•

Fixed Distribution Panel

Telescopic Distribution Panel

Outline Drawing

FeatureCompatible with all factory assembled Pre-terminated cabling • systemHigh reliability• High flexibility• Maximally integrated designing•

Fiber Distribution Panel

15

Netop FTTx-O

DN

Technologies

FeatureSuit for all common types of factory or on-site assembled OF • cables with excellent performance and easy installation High reliability• High flexibility• Maximally integrated designing•

SpecificationDimensions: •





Twist secure supports for max. 2 splice cassettes (1HU)• Twist secure supports for max. 4 splice cassettes (2HU)• 4 cable clamping slot cap and divider slot cap• 2 PG21 (29mm) cable inputs• Cable guidance 45°slant backwards, lead-way choice• 2 universal supports for simplex, duplex and break-out-cables • Screen print front plate labeling•

ApplicationISO / IEC 8802-3: FOIRL• ISO / IEC 8802-3: 10BASE-FL, FP & FB• ISO / IEC TR 11802-4: 4 & 16 Mbit/s Token Ring• ISO / IEC 8802-5t: 100 Mbit/s Token Ring• ISO / IEC 8802-12: Demand Priority• ATM at 52Mbit/s• ATM at 155Mbit/s• ATM at 622Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 133 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 266 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 531 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 1062 Mbit/s• ISO / IEC 8802-3: 1000BASE-SX• ISO / IEC 8802-3: 1000BASE-LX• ISO / IEC 9314-9: FDDI LCF-PMD• ISO / IEC 9314-4: FDDI SMF-PMD• EN ISO / IEC 9314-3: FDDI PMD• ISO / IEC 8802-3: 100BASE-FX• IEEE 802.3: 10GBASE-LX4 • IEEE 802.3: 10GBASE-ER/EW• IEEE 802.3: 10GBASE-SR/SW• IEEE 802.3: 10GBASE-LR/LW•

Fixed Splice Panel

Telescopic Splice Panel

Outline Drawing

Fiber Splice Panel

The System of Feeder Cable Includes the Following Products:Feeder Cable 17Optical Fiber Joint Enclosure 24Fiber Joint Enclosure for Splitter 28Optical Cable Cross Connecting Cabinet 32

FEEdER CAbLE SYSTEM

1FEEdER CAbLE

Feeder fiber optical feeder cable is usually used to connect the optical distribution frame (ODF) in central office (CO) and the splitter distribution cabinet (SDC). The feeder cable can be direct burial, duct installable or aerial fiber optical cable according to different installation and environment conditions. Netop designs, manufactures and supplies all kinds of standard feeder fiber optic cables or per specific customer requirements.

Order Information

Product Overview

Netop id FO Cable Type Fiber Structure

typeSequence No.

Cable Structure Information

Fiber No. Fiber Type Extended Information

N- X X XXX Detail according to catalogue XXX XXXXX

Detail according to customer's request

F: Fiber 1: 250μm bunchy fiber 001 002: 2 cores 9OS1B: SM 9/125

A: Outdoor 2: Ribbon fiber 002 004: 4 cores 9OS2D: G.652D

U: Outdoor & Indoor 3: Buffered fiber 003 012: 12 cores 62OM1: MM62.5/125

I: Indoor 4: No fiber … 024: 24 cores 50OM2: MM50/125

S:Special 192: 192 cores …

…

Other see <Netop Cable Systems>

18

Net

op F

TTx-

OD

N T

echn

olog

ies

a-WSQ(ZN)(l)2yW2y

FeatureLight armored stranded gel-filled loose tube cable• With dual plastic steel tape• Comply with DIN VDE 0888-3 and IEC 60794-1• Application: • Duct or cable trays Aerial (Lashed) Direct buriedHigher mechanical properties and other options on request• LSZH jacket or dielectric strength member is available on request•

Armored Direct-burial Fiber Optical Cable

19

Netop FTTx-O

DN

Technologies

Fiber Count

Tube Count

Max. Fiber per Tube

Nominal Cable Diameter mm

Nominal Cable Weight Kg/Km

Tensile Strength Long/Short N

Crush Resistance Long/Short N/10cm

2~36 6 6 14.0 210 1000/3000 1000/3000

38~72 6 12 15.7 250 1000/3000 1000/3000

74~96 8 12 17.4 290 1000/3000 1000/3000

98~120 10 12 19.0 345 1000/3000 1000/3000

122~144 12 12 20.0 420 1000/3000 1000/3000


Loose Tube Standard loose tube size with color-coated fibers and gel-filled results in economical use and facilitates installation

Central Member Steel wire or FRP as the dielectric member for central strength element with no bonding

Cable Core Central member with loose tube SZ stranded and if necessary fillers isolates fibers from installation

Waterproof Element The filling compound around the cable core and if necessary water-swellable tape

Aluminum Tape Excellent humidity-resistant

Corrugated Steel Tape Provide rodent resistance for direct buried application

Ripcord Easily ripping the cable jacket and aluminum tape and steel tape

Cable Jacket Double PE jacket strengths the mechanical capability and excellent UV-resistance and provides superior protection against abrasion

Color of Jacket Black

Specification

1 product typeNA1005 = Product No.

2 Center Strength member0 = FRP Strength Member1 = Steel Wire Strength Member

3 Water-Swellable tape0 = No Water-Swellable Tape1 = Water-Swellable Tape

4 Jacket ColorBK = Black…See Netop Color Code on Page 6 of <Netop Cable Systems>

5 Jacket material01 = PE02 = LSZH

6 length markingM = Markings in Meters (Standard)F = Markings in Feet

7 Fiber Count002 = 2 Cores…Others (004 to 144)

8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>

NA1005 - □ □ - □□ □□ - □ - □□□ - □□□□□

1 2 3 4 5 6 7 8

20

Net

op F

TTx-

OD

N T

echn

olog

ies

a-WSQ(ZN)2y

FeatureNon-armored stranded gel-filled loose tube cable• Fig-8 type• With stranded steel wires as the self-support unit• Comply with IEC 60794-1• Application: • Aerial with self-supportHigher mechanical properties and other options on request • Dielectric strength member is available on request•

Figure-8 Type Aerial Fiber Optical Cable

21

Netop FTTx-O

DN

Technologies

Fiber Count

Tube Count

Max. Fiber per Tube





2~36 6 6.0 9.6*17.8 150 1000/3000 300/1000

38~60 12 6.0 10.2*18.2 157 1000/3000 300/1000

62~72 12 6.0 10.7*18.7 167 1000/3000 300/1000

74~96 12 6.0 12.0*20.0 198 1000/3000 300/1000

98~120 12 6.0 13.7*21.7 229 1000/3000 300/1000

122~144 12 6.0 15.1*23.1 269 1000/3000 300/1000

*Provide different size steel wires (1.0mm, 1.2mm, 1.6mm) according to client different mechanical request.

Loose Tube Standard loose tube size with color-coated fibers and gel-filled results in economical use and facilitates installation




Self-Support Unit Stranded steel wires with different size

Ripcord Easily ripping the cable jacket

Cable Jacket PE jacket and excellent UV-resistance and provides superior protection against abrasion


Specification



2 Center Strength member0 = FRP Strength Member1 = Steel Wire Strength Member







NA1011 - □ □ - □□ □□ - □ - □□□ - □□□□□

1 2 3 4 5 6 7 8

22

Net

op F

TTx-

OD

N T

echn

olog

ies

a-WQ(ZN)2y

FeatureNon-armored stranded gel-filled loose tube cable• Ribbon fiber cable• Comply with IEC 60794-1• Application: • Duct or cable Trays Aerial (Lashed)Ribbons are individually numbered for easy identification• Higher mechanical properties and other options on request• LSZH jacket or dielectric strength member is available on request• Can provide ribbon with 4 or 8 fibers structure cable•

Ribbon Fiber Cable

23

Netop FTTx-O

DN

Technologies

Loose Tube Standard loose tube size with color-coated ribbon fibers and gel-filled results in economical use and facilitates installation





Cable Jacket PE jacket and excellent UV-resistance and provides superior protection against abrasion


Specification

Fiber Count

Tube Count

Fiber Count per Tube





2～36 6 6 10.8 91 600/1500 300/1000

38～72 6 12 12.6 114 600/1500 300/1000

74～96 8 12 13.2 132 1000/3000 300/1000

98～120 10 12 15.6 170 1000/3000 300/1000

122～144 12 12 17.5 185 1000/3000 300/1000

146～192 16 12 17.8 200 1000/3000 300/1000

194～216 18 12 18.1 225 1000/3000 300/1000

218～240 20 12 19.5 253 1000/3000 300/1000

242～288 24 12 22.2 302 1000/3000 300/1000



2 Center Strength member0 = FRP Strength Member







NA1001 - 0 □ - □□ □□ - □ - □□□ - □□□□□

1 2 3 4 5 6 7 8

2Order Information

Netop id Shape Sealing Structure of Box Cable Type entry type Max. Inlet Cable Port Max. Outlet Cable Port Max Tray Capacity Splicing Tray Count Splicing Tray TypeN-98G X X X X X(<10) X(<10) X X XX

1: Horizontal 1: Sticky cincture 1: Bunchy 0: Standard 1: 1 inlet port 1: 1 outlet port 2: 2 trays 1: 1 tray 06: 6 cores

2: Dome 2: Silicon gum 2: Ribbon 1: Multi-cables/ per entry 2: 2 inlet ports 2: 2 outlet ports 4: 4 trays 2: 2 trays 12: 12 cores

3: Mussel 3: 3 inlet ports 3: 3 outlet ports 5: 5 trays 3: 3 trays 16: 16 cores

4: 4 inlet ports 4: 4 outlet ports 8: 8 trays … 24: 24 cores

… … A: 40 trays A: 10 trays 4R: 4c ribbon

… B: 12 trays 8R: 8c ribbon

C: 14 trays AR: 12c ribbon

D: 16 trays

E: 18 trays

F: 20 trays

…

H: 24 trays

…

M: 30 trays

…

K: 36 trays

…

S: 40 trays

FIbER JOINT ENCLOSURE

Fiber joint enclosure is used for jointing the fiber optical cables which are laid directly underground, in duct or aerial. Netop supplies various types of joint enclosure in different structure and with highest-quality mechanical and environment performance.

Product Overview

Netop id Shape Sealing Structure of Box Cable Type entry type Max. Inlet Cable Port Max. Outlet Cable Port Max Tray Capacity Splicing Tray Count Splicing Tray TypeN-98G X X X X X(<10) X(<10) X X XX

1: Horizontal 1: Sticky cincture 1: Bunchy 0: Standard 1: 1 inlet port 1: 1 outlet port 2: 2 trays 1: 1 tray 06: 6 cores

2: Dome 2: Silicon gum 2: Ribbon 1: Multi-cables/ per entry 2: 2 inlet ports 2: 2 outlet ports 4: 4 trays 2: 2 trays 12: 12 cores

3: Mussel 3: 3 inlet ports 3: 3 outlet ports 5: 5 trays 3: 3 trays 16: 16 cores

4: 4 inlet ports 4: 4 outlet ports 8: 8 trays … 24: 24 cores

… … A: 40 trays A: 10 trays 4R: 4c ribbon

… B: 12 trays 8R: 8c ribbon

C: 14 trays AR: 12c ribbon

D: 16 trays

E: 18 trays

F: 20 trays

…

H: 24 trays

…

M: 30 trays

…

K: 36 trays

…

S: 40 trays

26

Net

op F

TTx-

OD

N T

echn

olog

ies

FeatureFor aerial, direct burial and duct installation• Sealing structure: silicon gum or sticky cincture• Ribbon and loose tube fiber splicing• High mechanical strength against impact and compression• Level of protect: IP68•

SpecificationFiber additional attenuation: ≤0.1dB• Fiber bending radius: ≥30mm• Axes orientation tensile strength: ≥1000N• Crush resistance: ≥2000N/100mm (Direct burial), • ≥1000N/100mm (Aerial and duct)Operating temperature: -40• ℃~+85℃

max tray Capacity

Splicing Tray type

Inlet/Outlet port

Cable Diameter mm

Outside Dimension(l×W×H) mm Sealing Structure

2 12 cores/tray 4 in 4 out Φ5-Φ14 390x180x88 Sticky cincture or silicon gum

5 12 cores/tray 2 in 2 out Φ7-Φ18 460x180x108 Sticky cincture or silicon gum

544

12 cores/tray24 cores/tray72c ribbon/tray

2 in 2 out Φ7-Φ25 492x202x104 Sticky cincture


4 in 4 out Φ7-Φ25 492x200x175 Sticky cincture

In-line Type Fiber Joint Enclosure

27

Netop FTTx-O

DN

Technologies

FeatureFor aerial, and duct installation• Sealing structure: silicon gum or sticky cincture• Ribbon and loose tube fiber splicing• High mechanical strength against impact and compression• Level of protect: IP68•

SpecificationFiber additional attenuation: ≤0.1dB• Fiber bending radius: ≥30mm• Axes orientation tensile strength: ≥1000N• Crush resistance:≥1000N/100mm (Aerial and duct)• Operating temperature: -40• ℃~+85℃

max tray Capacity

Splicing Tray type

Inlet/Outlet port

Cable Diameter mm

Outside Dimension(l×W×H) mm Sealing Structure

2 6 cores/tray 2 in 2 out Φ7-Φ18 Φ85x330 Silicon gum

2 12 cores/tray 2 in 3 out Φ7-Φ18 Φ100x340 Silicon gum


3 in 3 out Φ7-Φ22 Φ210x440 Silicon gum

4 12 cores/tray24 cores/tray 3 in 3 out Φ7-Φ22 Φ210x440 Silicon gum

Dome Type Fiber Joint Enclosure

3Order Information

Netop id Shape Sealing Structure of Box Cable Type entry type Max. Inlet Cable Port Max. Outlet Cable Port Max Tray Capacity Splicing Tray Count Splicing Tray Type Function Core NumberN-98G X X X X X(<10) X(<10) X X XX X XX

1: Horizontal 1: Sticky cincture 1: Bunchy 0: Standard 1: 1 inlet port 1: 1 outlet port 2: 2 trays 1: 1 tray 06: 6 cores A: Optical distribute with SC/APC adaptors 02: 2 cores

2: Dome 2: Silicon gum 2: Ribbon 1: Multi-cables/ per entry 2: 2 inlet ports 2: 2 outlet ports 3: 3 trays 2: 2 trays 12: 12 cores B: With 1pc 1x8 splitter and splice 04: 4 cores

3: Mussel 3: 3 inlet ports 3: 3 outlet ports 4: 4 trays 3: 3 trays 16: 16 cores C: With 1pc 1x8 splitter and SC/APC distribution 08: 8 cores

4: 4 inlet ports 4: 4 outlet ports 5: 5 trays … 24: 24 cores D: With 2pcs 1x8 splitter and splice 16: 16 cores

… … 6: 6 trays A: 10 trays 4R: 4c ribbon E: With 2pcs 1x8 splitter and SC/APC distribution 18: 18 cores

8: 8 trays B: 12 trays 8R: 8c ribbon F: With 1pc 1x16 splitter and splice 20: 20 cores

A: 40 trays C: 14 trays AR: 12c ribbon G: With 1pc 1x16 splitter and SC/APC distribution …

B: 20 trays D: 16 trays H: Splice and SC/APC distribution

C: 16 trays E: 18 trays K: Optical distribute with SC/UPC adaptors

F: 20 trays L: With 1pc 1x8 splitter and splice

… M: With 1pc 1x8 splitter and SC/UPC distribution

H: 24 trays M: With 2pcs 1x8 splitter and splice

… P: With 2pcs 1x8 splitter and SC/UPC distribution

M: 30 trays Q: With 1pc 1x16 splitter and splice

… R: With 1pc 1x16 splitter and SC/UPC distribution

Q: 36 trays S: Splice and SC/UPC distribution

…

S: 40 trays

FIbER JOINT ENCLOSURE FOR SPLITTER

Splitter joint enclosure is pre-assembled and tested with optical splitters inside enclosure for distributing the power transmitted from feeder cable to distribution cables. Netop’s unique design includes the features of high capacity and easy installation.

Product Overview

Netop id Shape Sealing Structure of Box Cable Type entry type Max. Inlet Cable Port Max. Outlet Cable Port Max Tray Capacity Splicing Tray Count Splicing Tray Type Function Core NumberN-98G X X X X X(<10) X(<10) X X XX X XX

1: Horizontal 1: Sticky cincture 1: Bunchy 0: Standard 1: 1 inlet port 1: 1 outlet port 2: 2 trays 1: 1 tray 06: 6 cores A: Optical distribute with SC/APC adaptors 02: 2 cores

2: Dome 2: Silicon gum 2: Ribbon 1: Multi-cables/ per entry 2: 2 inlet ports 2: 2 outlet ports 3: 3 trays 2: 2 trays 12: 12 cores B: With 1pc 1x8 splitter and splice 04: 4 cores

3: Mussel 3: 3 inlet ports 3: 3 outlet ports 4: 4 trays 3: 3 trays 16: 16 cores C: With 1pc 1x8 splitter and SC/APC distribution 08: 8 cores

4: 4 inlet ports 4: 4 outlet ports 5: 5 trays … 24: 24 cores D: With 2pcs 1x8 splitter and splice 16: 16 cores

… … 6: 6 trays A: 10 trays 4R: 4c ribbon E: With 2pcs 1x8 splitter and SC/APC distribution 18: 18 cores

8: 8 trays B: 12 trays 8R: 8c ribbon F: With 1pc 1x16 splitter and splice 20: 20 cores

A: 40 trays C: 14 trays AR: 12c ribbon G: With 1pc 1x16 splitter and SC/APC distribution …

B: 20 trays D: 16 trays H: Splice and SC/APC distribution

C: 16 trays E: 18 trays K: Optical distribute with SC/UPC adaptors

F: 20 trays L: With 1pc 1x8 splitter and splice

… M: With 1pc 1x8 splitter and SC/UPC distribution

H: 24 trays M: With 2pcs 1x8 splitter and splice

… P: With 2pcs 1x8 splitter and SC/UPC distribution

M: 30 trays Q: With 1pc 1x16 splitter and splice

… R: With 1pc 1x16 splitter and SC/UPC distribution

Q: 36 trays S: Splice and SC/UPC distribution

…

S: 40 trays

30

Net

op F

TTx-

OD

N T

echn

olog

ies

FeatureFor aerial, direct burial and duct installation• Sealing structure: silicon gum or sticky cincture• Ribbon and loose tube fiber splicing• High mechanical strength against impact and compression• Level of protect: IP68•

SpecificationFiber additional attenuation: ≤0.01dB• Fiber bending radius: ≥30mm• Axes orientation tensile strength: ≥1000N• Crush resistance:≥1000N/100mm (Aerial and duct)• Outside dimension: Φ278 x560mm• Suitable for Ф7-Ф25mm cable• Compatible with 2pcs 1×8 splitter or 1pc 1×16 splitter• 6 cable entry ports• 6 cores and 12 cores splicing tray available• Max. tray capacity: 20 • Up to splice 240 fiber counts•

Typical Product Description

98G221166C-D12E18 192F, Dome, Fiber Joint Closure, with 1x8 splitter*2 & 18pcs SC/APC adapters

98G221166C-D12G18 192F, Dome, Fiber Joint Closure, with 1x16 splitter*1 & 18pcs SC/APC adapters

98G221166C-D12H18 192F, Dome, Fiber Joint Closure, with 20xSC/APC termination panel

Dome Fiber Joint Enclosure for Splitter

31

Netop FTTx-O

DN

Technologies

FeatureFor aerial, direct burial and duct installation• Sealing structure: silicon gum or sticky cincture• Ribbon and loose tube fiber splicing• High mechanical strength against impact and compression• level of protect: IP68•

Typical Product Description

SpecificationFiber additional attenuation: ≤0.01dB• Fiber bending radius: ≥30mm• Axes orientation tensile strength: ≥1000N• Crush resistance: ≥2000N/100mm (Direct burial), • ≥1000N/100mm (Aerial and duct)Operating temperature: -40• ℃~+60℃

Outside dimension: 490x200x140mm• Suitable for Ф7-Ф25mm cable• Compatible with 2pcs 1×8 splitter or 1pc 1×16 splitter• 6 cable entry ports• 6 cores and 12 cores splicing tray available• Max. tray capacity: 6 • Up to splice 72 fiber counts•

98G1211663-324E18 72F, Horizontal, Fiber Joint Closure, with 1x8 splitter*2 & 18pcs SC/APC adapters

98G1211663-324G18 72F, Horizontal, Fiber Joint Closure, with 1x16 splitter*1 & 18pcs SC/APC adapters

98G1211663-324H18 72F, Horizontal, Fiber Joint Closure, with 20xSC/APC termination panel

In-line Fiber Joint Enclosure for Splitter

4N-Netop id Max. Distribution Capacity Adapter Type Interface Body Material Operation Type Core Number Require Pigtail LoadedOCC- XXX X X X X XXX X

144 0: Null 0: Null 1: SMC A: Single face 024: 24 cores 0: Without pigtail

288 1: SC simplex 1: UPC 2: Stainless steel B: Double face 072: 72 cores 1: With 0.9mm pigtails

576 2: SC duplex 2: APC 3: SPCC 192: 192 cores 2: With customerized pigtails

768 3: FC simplex 384: 384 cores

4: LC duplex Full loaded or customerized

Order Information

OPTICAL CAbLE CROSS CONNECTING CAbINET

Optical Cable Cross Connecting Cabinet (hereafter named OCC) is used to connect the fiber trunk cable and the distribution cable between the interface device, which has the import of cable, fastness, grounding protection, welding, jumping (distribution), storage, switching and other functions. With a high versatility in the optical route, especially for fiber optical communication system into a central office trunk cable and distribution side, can achieve the fiber optic lines linked, distributed and transited easily.

Product Overview

N-Netop id Max. Distribution Capacity Adapter Type Interface Body Material Operation Type Core Number Require Pigtail LoadedOCC- XXX X X X X XXX X

144 0: Null 0: Null 1: SMC A: Single face 024: 24 cores 0: Without pigtail

288 1: SC simplex 1: UPC 2: Stainless steel B: Double face 072: 72 cores 1: With 0.9mm pigtails

576 2: SC duplex 2: APC 3: SPCC 192: 192 cores 2: With customerized pigtails

768 3: FC simplex 384: 384 cores

4: LC duplex Full loaded or customerized

34

Net

op F

TTx-

OD

N T

echn

olog

ies

FeatureCabinet is made of high strength stainless steel, protection • class IP65, high intension, corrosion-resistant, all-weather protection and can resist accidental damage or malignant destruction. Closed cabinet structure, supply the cable terminal and • distribution with physical protection, prevent the optical fiber cable from accidental damage. Cable entrance from the rack at the bottom and be fixed, • grounding and protection. The series OCC bottom has four φ13 holes, which can be • pre-installed into the M10 expansion bolts on the base. Put on the OCC with the fastening nut.

SpecificationOCC standard: YD/T988-2007 • Connecter loss(including insertion, Changeability and • Durability)≤0.5dB Insert loss≤0.2dB • Return loss: PC≥40dB UPC≥50dB APC≥60dB • Connector life＞1000 times • Insulation resistance (between frame and protection • grounding)＞20000MΩ/500V(DC) Dielectric strength (between frame and protection grounding)• ＞3000V(DC)/1min no breakdown, no arc Dimension: 1450×750×320 mm • Installation dimension: 700mm×200 mm • Single side operation • Weight: 185 Kg•

FeatureCabinet is made of high strength stainless steel, protection • class IP65, high intension, corrosion-resistant, all-weather protection and can resist accidental damage or malignant destruction. Closed cabinet structure, supply the cable terminal and • distribution with physical protection, prevent the optical fiber cable from accidental damage. Cable entrance from the rack at the bottom and be fixed, • grounding and protection. The series OCC bottom has four φ13 holes, which can be • pre-installed into the M10 expansion bolts on the base. Put on the OCC with the fastening nut.

SpecificationComply with YD/T998-2007 • Connecter loss(including insertion, Changeability and • Durability)≤0.5dB Insert loss≤0.2dB • Return loss: PC≥40dB UPC≥50dB APC≥60dB • Connector life＞1000 times • Insulation resistance (between frame and protection • grounding)＞20000MΩ/500V(DC) Dielectric strength (between frame and protection grounding)• ＞3000V(DC)/1min no breakdown, no arc. Dimension: 1350×650×320 mm • Installation dimension: 600×200 mm • Single side operation • Weight: 150 Kg•

288F Stainless Cabinet144F Stainless Cabinet

35

Netop FTTx-O

DN

Technologies

A: Double-layer stainless steel cabinetB: Optical Fiber Fusion and Distribution Intergrated ModuleC: Optical splice UnitD: Cable import UnitE: Double-layer stainless steel front doorF: Cabinet bottom

Accessories Name Qty UnitOcc User Manual 1 ea

Proved Certification 1 ea

Expansion Screw 4 set

Nylon Ties 20 ea

Key 1 set

Fiber Protecting Tube 1 set

Fiber Heat-shrinkable Tube 1 set

3M Tape 1 ea

FeatureCabinet is made of high strength stainless steel, protection class IP65, high intension, corrosion-resistant, all-weather protection and • can resist accidental damage or malignant destruction. Closed cabinet structure, supply the cable terminal and distribution with physical protection, prevent the optical fiber cable from • accidental damage. Cable entrance from the rack at the bottom and be fixed, grounding and protection. • The series OCC bottom has four φ13 holes, which can be pre-installed into the M10 expansion bolts on the base. Put on the OCC • with the fastening nut.

SpecificationOCC standard: YD/T988-2007 • Connecter loss(including insertion, Changeability and • Durability)≤0.5dB Insert loss≤0.2dB • Return loss: PC≥40dB UPC≥50dB APC≥60dB • Connector life＞1000 times • Insulation resistance (between frame and protection • grounding)＞20000MΩ/500V(DC) Dielectric strength (between frame and protection grounding)• ＞3000V(DC)/1min no breakdown, no arc Dimension: 1450×750×320 mm • Installation dimension: 700×460 mm • Double side operation • Weight: 225 Kg•

576F Stainless Cabinet

FIbER dISTRIbUTION SYSTEM

The system of Fiber Distribution Includes the Following Products:Splitter Distribution Cabinet 37Distribution Cable 41

1SPLITTER dISTRIbUTION CAbINET

Netop splitter distribution cabinet (SDC) can provide extreme-high distribution capacity by applying high split-ratio components and state-of-art mechanical design techniques. The double-sided operation and modular design make the SDC installation and maintenance very easily, as well that it is convenient for future system expansion.

Order Information

Product Overview

Netop id Envirement Adapter

type Interface Cabinet Material

Operation type Installation

max. Distribution Capacity

Pigtail Loaded

N-SDC- X X X X X X XXX X

　 1: Outdoor 1: SC simplex 1: UPC 1: SPCC A: Single face 1: Wall mount 032 0: Without pigtail

　 2: Indoor 2: SC duplex 2: APC 2: Stainless steel B: Double face 2: Free-standing 072 1: With 0.9mm pigtails

　　 3: LC simplex 　 3: SMC 　　 144With customerized pigtails

　　 4: LC duplex 　　　　 192 　

　　 5: FC Simplex 　　　　 288 　

　　　　　　　 384 　

38

Net

op F

TTx-

OD

N T

echn

olog

ies

FeatureBody case is made of high-quality steel sheet, surface plastic spray• Double-sided operation(front and rear), divided management• Suitable for outdoor installation with IP65 protection• Whole hinge lock, fixed with three points• Various interface available SC, FC or LC•

SpecificationMax fiber capacity: 384• Suitable for Ф7-Ф25mm cable• Fiber bending radius: ≥30mm• Provides the fixture and grounding device for 6 outdoor cables• Supports up to 12pcs 1×32 (2×32) splitter modules or 24pcs 1×16 splitter modules• Parking lot accommodates up to 288 splitter output ports• 6 cores and 12 cores splicing tray available• Max. tray capacity: 6 • Supports pre-terminated cable or splicing cable• Dimension mm: 1200×600×320• Operating temperature: -40• ℃~+60℃

Front Rear


Cable Distribution

Earthing Sheet Copper

Pre-terminated Cable

Splitter Module

Splice Tray

Parking Lot

384-fiber Splitter Distribution Cabinet

39

Netop FTTx-O

DN

Technologies

FeatureBody case is made of high-quality steel sheet, surface plastic spray• Double-sided operation(front and rear), divided management• Suitable for outdoor installation with IP65 protection• Whole hinge lock, fixed with three points• Various interface available SC, FC or LC•

SpecificationMax fiber capacity: 192• Suitable for Ф7-Ф25mm cable• Fiber bending radius: ≥30mm• Provides the fixture and grounding device for 6 outdoor cables• Supports up to 6pcs 1×32 (2×32) splitter modules or 12pcs • 1×16 splitter modulesParking lot accommodates up to 144 splitter output ports• 6 cores and 12 cores splicing tray available• Max. tray capacity: 6 • Supports pre-terminated cable or splicing cable• Dimension mm: 900×600×300• Operating temperature: -40• ℃~+60℃

192-fiber Splitter Distribution Cabinet


Splitter Module

Parking Lot

Pre-terminated Cable

Cable Distribution

Splice Tray

40

Net

op F

TTx-

OD

N T

echn

olog

ies

FeatureBody case is made of high-quality steel sheet, surface plastic • spraySingle-sided operation, divided management• Suitable for outdoor installation with IP65 protection• Whole hinge lock, fixed with three points•

SpecificationMax fiber capacity: 144• Suitable for Ф7-Ф25mm cable• Fiber bending radius: ≥30mm• Provides the fixture and grounding device for 6 outdoor cables• Supports up to 6pcs 1×32 (2×32) splitter modules or 12pcs • 1×16 splitter modulesParking lot accommodates up to 64 splitter output ports• Modular structure: 12pcs termination and splicing modules• Supports pre-terminated cable or splicing cable• Dimension mm: 1000×600×300• Operating temperature: -40• ℃~+60℃

32-fiber Splitter DistributionCabinet

FeatureBody case is made of high-quality steel sheet, surface plastic • spraySingle door, front operation, divided management• Wall mount and pole mount available• Suitable for outdoor installation with IP65 protection• Various interface available SC, FC or LC•

SpecificationMax fiber capacity: 32• Suitable for Ф7-Ф25mm cable• Fiber bending radius: ≥30mm• Provides the fixture and grounding device for 4 outdoor cables• Supports up to 1pc 1×32 (2×32) splitter modules or 2pcs • 1×16 splitter modulesParking lot accommodates up to 32 splitter output ports• 6 cores and 12 cores splicing tray available• Modular structure: 12pcs termination and splicing modules• Dimension mm: 500×480×110• Operating temperature: -40• ℃~+60℃

144-fiber Splitter DistributionCabinet

Left area for Splicing and cabling

Right area for splitting and parking

Outlet Cable

Inlet Cable

Earthing Sheet Copper

Splitter Module

Splice Tray

Parking Lot

2dISTRIbUTION CAbLE

Fiber optic distribution cable can be made of indoor or outdoor sheathed jackets for different environment conditions, and which function is to get the splitter distribution cabinet (SDC) and fiber distribution (FDU) linked. Netop is able to design and make it to the specific configuration requirements.

Order Information

Product Overview

Netop id

FO Cable type

Fiber Structure type

Sequence No.

Cable Structure Information Fiber No. Fiber Type Extended

Information

N- X X XXX Detail according to catalogue XXX XXXXX Detail according to

customer's request



U: Outdoor &Indoor 3: Buffered fiber 003 012: 12 cores 62OM1: MM62.5/125

I: Indoor 4: No Fiber … 024: 24 cores 50OM2: MM50/125

S: Special 192: 192 cores …

…

Detail according to Catalogue

　　　　　(Other see <Netop Cable Systems>)

42

Net

op F

TTx-

OD

N T

echn

olog

ies

I-V(ZN)HH -L-Distribution

Feature Large cores distribution indoor cableWith aramid yarn as strength member

Halogen-free jacket

Comply with DIN VDE 0888-6 and IEC 60794-2• Application: • Premises distribution system Horizontal backbone cabling Indoor LAN InterconnectHigher mechanical properties and other options on request • Dielectric strength member is available on request•

0.9mm Distribution Cable

43

Netop FTTx-O

DN

Technologies

Buffer 0.9mm tight buffer or semi-tight buffer

Buffer Color The standard color refer to color code on page 6 of <Netop Cable Systems>

Strength Member Aramid yarn

Subunit 6 cores of 0.9mm buffers

Subunit Jacket Flame-retardant and low smoke halogen-free jacket

Central Member FRP as the dielectric member for central strength element with no bonding


Cable Jacket Flame-retardant and low smoke halogen-free jacket and excellent UV-resistance

Color of Jacket and Subunit Jacket

Yellow for single modeOrange for multi modeAqua for OM3Other standard color on request on page 6 of <Netop Cable Systems>

Specification

Fiber Count Subunit Count





24 4 10.4 85 400/1300 300/1000

36 6 13.5 95 400/1300 300/1000

42 7 14.6 185 400/1300 300/1000

48 8 15.7 265 400/1300 300/1000

60 10 18.2 320 400/1300 300/1000

72 12 20.5 440 400/1300 300/1000


1 product typeNI3013 = Product No.

2 Jacket ColorYL = Yellow…See Netop Color Code on Page 6 of <Netop Cable Systems>

3 Jacket material02 = LSZH04 = PVC <OFNR>05 = PVC <OFNP>

5 Buffer typeT = Tight BufferS = Semi-Tight BufferL = Loose Buffer




NI3013 - □□ 0 2 - RD □ - □ - □□□ - □□□□□

1 2 3 4 5 6 7 8

4 Fan-out unit diameterRD = Round Cable

44

Net

op F

TTx-

OD

N T

echn

olog

ies

Buffer 0.9mm tight buffer or semi-tight buffer

Buffer Color White or other standard color on page 6 of <Netop Cable Systems>

Strength Member Aramid yarn

Subunit 2.0mm or 3.0mm

Subunit Jacket Flame-retardant and Low Smoke Halogen-free jacket

Central Member FRP as the dielectric member for central strength element with no bonding


Cable Jacket Flame-retardant and Low Smok Halogen-free jacket and excellent UV-resistance

Color of Jacket and Subunit Jacket

Yellow for Single ModeOrange for Multi ModeAqua for OM3Other standard color on request on page 6 of <Netop Cable Systems>

I-V(ZN)HH -BREAK-OUT

Specification

FeatureMulti cores breatout cable with 2.0mm and 3.0mm subunits• With aramid yarn as strength member• Halogen-free jacket• Comply with DIN VDE 0888-6 and IEC 60794-2• Application: • Premises distribution system Horizontal backbone cabling Indoor LAN InterconnectHigher mechanical properties and other options on request • Dielectric strength member is available on request•

2.0mm Distribution Cable

45

Netop FTTx-O

DN

Technologies

Fiber Count Subunit Count Diameter mm





2 2.0 5.9 28 250/800 300/1000

4 2.0 5.9 39 250/800 300/1000

6 2.0 8.3 70 250/800 300/1000

8 2.0 8.1 76 300/1000 300/1000

12 2.0 10.4 80 300/1000 300/1000

16 2.0 11.3 103 500/1500 300/1000

24 2.0 13.9 160 500/1500 300/1000

2 3.0 7.7 50 250/800 300/1000

4 3.0 7.7 59 250/800 300/1000

6 3.0 10.4 88 250/800 300/1000

8 3.0 12.3 122 300/1000 300/1000

12 3.0 13.5 128 300/1000 300/1000

16 3.0 15.5 185 500/1500 300/1000

24 3.0 19.3 288 500/1500 300/1000


1 product typeNI3014 = Product No.

2 Jacket ColorYL = Yellow…See Netop Color Code on Page 6 of <Netop Cable Systems>

3 Jacket material02 = LSZH04 = PVC <OFNR>05 = PVC <OFNP>

5 Buffer typeT = Tight BufferS = Semi-Tight BufferL = Loose Buffer




NI3014 - □□ 0 2 - □□ □ - □ - □□□ - □□□□□

1 2 3 4 5 6 7 8

4 Sub unit diameter20 = 2.0mm30 = 3.0mm

dROP CAbLE SYSTEM

The System of Drop Cable Includes the Following Products:Optical Fiber Distribution Unit 47Drop Cable for FTTH 51

1OPTICAL FIbER dISTRIbUTION UNIT

Distribution cable and drop cable is connected in between the optical fiber distribution unit (FDU), which is an important part of the whole optical distribution network (ODN). Netop’s FDU is very flexible on capacity and coupling interface configuration requirements. Both indoor and outdoor applicable FDU are available from Netop Technologies.

Order Information

Product Overview

Envirement Adapter Type Interface Cabinet Material Max. Capacity Splice Tray/PigtailN-FDU- X X X X XXX X

　 1: Outdoor 0: No adapter 0: No adaptor 1: SPCC 002: 2 cores A: No splice tray

　 2: Indoor 1: SC simplex 1: UPC 2: Stainless steel 004: 4 cores B: No pigtail

　　 2: SC duplex 2: APC 3: SMC 008: 8 cores C: With 0.9mm pigtail 2m

　　 3: LC simplex 　　 012: 12 cores D: With 2.0mm pigtail 2m

　　 4: LC duplex 　　 024: 24 cores E: With 3.0mm pigtail 2m

　　 5: FC simplex 　　 036: 36 cores 　

　　 6: ST simplex 　　 048: 48 cores 　

　　 7: MPO adaptor 　　 072: 72 cores 　

　　　　 096: 96 cores 　

48

Net

op F

TTx-

OD

N T

echn

olog

ies

Splice Tray

Inlet Cable

Drop Cable

FeatureBody case is made of high-quality steel sheet, surface plastic spray• Wall mount and pole mount available• Inlet cable can either be loose tube cable or slotted cable• Outlet cable can either be optical fiber cord or drop cable•

SpecificationMax fiber capacity: 72• Fiber bending radius: ≥30mm• Suitable for Ф7-Ф25mm cable• 6 cores and 12 cores splicing tray available• Modular structure: 6pcs termination and splicing modules• Suitable for outdoor installation with IP65 protection • Operating temperature: -40• ℃~+85℃

Outdoor FDU

49

Netop FTTx-O

DN

Technologies



Outdoor FDU with Adapter

50

Net

op F

TTx-

OD

N T

echn

olog

ies



P/N Description Dimension W x H x D mm Splice Tray Counts Max.N-FDU-1001012B 12F Outdoor FDU, SPCC 230 x 350 x 100 1







N-FDU-1411008A 8F Outdoor FDU,LC/UPC duplex, SPCC 240 x 290 x 70 0

N-FDU-1411012D 12F Outdoor FDU,LC/UPC duplex, SPCC 230 x 290 x 70 1

N-FDU-1412024A 24F Outdoor FDU,LCD/UPC, stainless steel 240 x 290 x 80 0







N-FDU-2411012D 12F Indoor FDU,LC/UPC duplex, SPCC 230 x 290 x 70 1

N-FDU-2411024A 24F Indoor FDU,LCD/UPC, SPCC 240 x 290 x 80 0



Indoor FDU

Splice Tray

Inlet Cable

Drop Cable

2dROP CAbLE FOR FTTH

Netop offers the compact, durable and self-supporting micro FTTH fiber cable in full-dry construction, and which supports the last-mile of the passive optical distribution network (ODN). The Netop micro FTTH cable can be for direct burial, duct or aerial installation as options.

Product Overview

Order Information

Netop id FO Cable Type Fiber Structure

typeSequence No.

Cable Structure Information

Fiber No. Fiber Type Extended Information

N- X X XXX Detail according to catalogue XXX XXXXX

Detail according to customer's request



U: Outdoor & Indoor 3: Buffered fiber 003 012: 12 cores 62OM1: MM62.5/125

I: Indoor 4: No fiber … 024: 24 cores 50OM2: MM50/125

S:Special 192: 192 cores …

…

Other see <Netop Cable Systems>

52

Net

op F

TTx-

OD

N T

echn

olog

ies

i-(ZN)H -drop

Feature Micro cable for FTTHWith FRP as strength member

Halogen-free jacket

Comply with IEC 60794-2• Application: • Installation in small bending environment indoor FTTx project for Indoor cableBending radius can be achieved up to 15mm• G.657 fiber is recommended for this cable• Higher mechanical properties and other options on request • Dielectric strength member is available on request•

Drop Cable

53

Netop FTTx-O

DN

Technologies

Fiber Count

Nominal Cable Diameter mm Fiber Structure Nominal Cable

Weight Kg/KmTensile Strength Long/Short N


1 2.0*3.0 0.25mm 8.1 30/60 300/1000

2 2.0*3.4 0.25mm*2 8.5 30/60 300/1000

4 2.0*4.0 Ribbon fiber 9.8 30/60 300/1000

Fiber Type 250μm fiber or ribbon fiber

Fiber Color Standard color on page 6 of <Netop Cable Systems>

Strength Member Two parallel FRPs as the dielectric members for strength element with no bonding

Cable Jacket Flame-retardant and Low Smoke Halogen-free jacket and excellent UV-resistance

Color of Jacket Black or other standard color on request on page 6 of <Netop Cable Systems>

Specification


1 product typeNS1001 = Product No.


3 Jacket material02 = LSZH

4 Strength member0 = FRP Strength Member1 = Steel Wire Strength Member

5 Buffer typeF = FiberR = Ribbon Fiber


7 Fiber Count001 = 1 Core…Others (002 to 004)


NS1001 - □□ 02 - □ □ - □ - □□□ - □□□□□

1 2 3 4 5 6 7 8

54

Net

op F

TTx-

OD

N T

echn

olog

ies

i-(ZN)H –Fly

Feature Drop micro cable for FTTH with steel for dragWith FRP as strength member

Helogen-free jacket

Comply with IEC 60794-2• Application: • Installation in small bending environment indoor/outdoor FTTx project for indoor cableG.657 fiber is recommended for this cable• Higher mechanical properties and other options on request • Dielectric strength member is available on request•

Aerial Drop Cable

55

Netop FTTx-O

DN

Technologies

Fiber Count

Nominal Cable Diameter mm Fiber Structure Nominal Cable

Weight Kg/KmTensile Strength Long/Short N


1 2.0*5.0 0.25mm 19.1 60/120 300/1000

2 2.0*5.0 0.25mm*2 20.1 60/120 300/1000

4 2.0*5.6 Ribbon fiber 22.5 60/120 300/1000

Fiber Type 250μm fiber or ribbon fiber

Fiber Color Standard color on page 6 of <Netop Cable Systems>

Strength Member Two parallel FRPs as the dielectric members for strength element with no bonding

Drag Member Steel

Cable Jacket Flame-retardant and Low Smoke and Halogen-free jacket and excellent UV-resistance

Color of Jacket Black or other standard color on request on page 6 of <Netop Cable Systems>

Specification


1 product typeNS1002 = Product No.


3 Jacket material02 = LSZH

4 Strength member0 = FRP Strength Member1 = Steel Wire Strength Member

5 Buffer typeF = FiberR = Ribbon Fiber


7 Fiber Count001 = 1 Core…Others (002 to 004)


NS1002 - □□ 02 - □ □ - □ - □□□ - □□□□□

1 2 3 4 5 6 7 8

FIbER TERMINATION SYSTEMThe System of Fiber Termination Includes the Following Products:Outdoor Optical Terminal Box 57Fiber Faceplate Box 59Fast Field-assembly Splicing and Connecting Product 62

1OUTdOOR OPTICAL TERMINAL bOx

Outdoor optical terminal box is used for terminating drop cable in outdoor environment. Working as the customer FTTH application interface, Netop optical terminal box is applicable for site-splicing, field-installable connector termination or mechanical splice installation.

Order Information

Product Overview

Envirement Adapter Type Interface Cabinet Material Max. Capacity Splice Tray/PigtailN-FDU- X X X X XXX X

　 1: Outdoor 0: No adapter 0: No adaptor 1: SPCC 002: 2 cores A: No splice tray

　 2: Indoor 1: SC simplex 1: UPC 2: Stainless steel 004: 4 cores B: No pigtail

　　 2: SC duplex 2: APC 3: SMC 008: 8 cores C: With 0.9mm pigtail 2m

　　 3: LC simplex 　　 012: 12 cores D: With 2.0mm pigtail 2m

　　 4: LC duplex 　　 024: 24 cores E: With 3.0mm pigtail 2m

　　 5: FC simplex 　　 036: 36 cores 　

　　 6: ST simplex 　　 048: 48 cores 　

　　 7: MPO adaptor 　　 072: 72 cores 　

　　　　 096: 96 cores 　

58

Net

op F

TTx-

OD

N T

echn

olog

ies

Splice Tray

Hinge

FeatureSuitable for the protective connection between cables and pigtails• Suitable for simplex and duplex different adapter.• Lockable door providing good security•

SpecificationSuitable for 4 fibers indoor drop cable• Fiber bending radius: ≥30mm• Products classification: pole mounted, wall mount. • IP65 protection for outdoor environment• Dimension: 200 x 250 x 55• Operating temperature: -40• ℃~+85℃

Outdoor Optical Terminal Box

2FIbER FACEPLATE bOx

Netop fiber faceplate box works as the customer Fiber To The Desk (FTTD) application interface, which is specially designed to adopt the drop cable installations by having unique structure inside for excessive cable storage by maintaining good bending radius of the cable. The box is applicable for site-splicing, field-installable connector termination or mechanical splice installation.

Order Information

Product Overview

Netop id Adapter Type Fiber Number Series Customer IDN-FFB- X X X X: First letter of customer's name

1: SC/APC simplex 0: without pigtail A: A type N: Netop standard

2: SC/UPC simplex 1: 1 fiber B: B type

3: SC/APC duplex 2: 2 fiber C: C type

4: SC/UPC duplex 4: 4 fiber

5: LC/APC duplex

6: LC/UPC duplex

7: FC/APC simplex

8: FC/UPC simplex

60

Net

op F

TTx-

OD

N T

echn

olog

ies

FeatureTop and bottom cable entry hold available• With hinge and lock protection• Compatible with three connect methods • a. Directly connect drop cable with field assembled fast connector b. Connect drop cable and pigtail with mechanical splice unit c. Connect drop cable and pigtail by using heat splicing method

SpecificationSuitable for 2 fibers indoor drop cable• Dimension: 160mmX96mmX30mm•

1

5

2 3 4

FeatureTop and bottom cable entry hold available• Compatible with three connect methods • a. Directly connect drop cable with field assembled fast connector b. Connect drop cable and pigtail with mechanical splice unit c. Connect drop cable and pigtail by using heat splicing method


Fiber Entry HoleFixing Slot for Fusion Splicer Protection Tube

Drop Cable

Wall Installation Hole

Spring Shutter

1. Fixing slot for fusion splicer protection tube: 2 places2. Wall installation hole: 4 places3. Fiber entry hole: 2 places4. Fiber holder: 2 places5. Fixing slot for adaptor: 2 places

Fiber Faceplate Box -Type A Fiber Faceplate Box- Type B

61

Netop FTTx-O

DN

Technologies

FeatureFFB type C are used to connect workplace computers with the horizontal • fiber-optic installationConnectivity system ST, SC-duplex, LC-duplex and MT-RJ are supported• Fit with standard 86x86mm wall back box • 45 degree angled outlet without coupler / keystone attached • Fiber optic adapters or modules available • Delivered with installation screws and labeling system•


Fiber Faceplate Box- Type C

FIELd-INSTALLAbLE FIbER OPTIC CONNECTOR

Netop field-installable fiber optic Connector includes both SC and FC types, which take the advantage of the latest Netop rapid ready-termination technology. The Netop field-installable fiber optic connector provides high-quality mechanical and optical performance which meet or exceed the factory-installed fiber optic connectors.

Product Overview3

Order Information

Netop id Fiber Type Cable Type Connector Type Interface Type SeriesN-FC- X X XX X X

C: SingleMode & MultiMode 2: 250 µm SC: SC connector U: UPC A: A type

S: SigleMode 9: 900 µm FC: FC connector A: APC

M: MultiMode 3: 2.0 mm & 3.0 mm LC: LC connector

F: 3.1x2.0mm figure-8 drop cable

63

Netop FTTx-O

DN

Technologies

N-FC-CxSCUA

Figure -8 drop cable stripper

ClampField Assembly Connector Construction

Coat Stripper

Clamp for N-FC-CxSCUA

N-FC-CxFCUA

item Technical ParametersFiber Mode Single & multi mode

Operation Time About 120s(no fiber cut)

Insert Loss ≤ 0.3dB(1310nm & 1550nm)

Return Loss ≤ -40dB

Fastening Strength of Naked Fiber >5 N

Fastening Strength of Naked Fiber Holder >10 N

Tensile Strength >50 N

Using Temperature -40~+75℃

On-line Tensile Strength (20 N) △ IL ≤ 0.2dB △ RL ≤ 5dB

Mechanical Durability (500 Times) △ IL ≤ 0.2dB △ RL ≤ 5dB

Drop-off Test (Drop-off Height 4m, Once per Direction, Totally 3 Times) △ IL ≤ 0.2dB △ RL ≤ 5dB

FeatureBased on the unique Netop pluggable non-preset tube • technology.Precision ceramic components with co-axial self centering, • excellent and durable optical property.Optical fiber fits axially in elastic way and avoids completely • any false connect.Triple clamping through the naked fiber, tight buffer and cable, • etc., can be used as patchcord.High on-line tensile strength of optical fast connector after • terminating, always keep connectingUnder the force from cabling and drawing.• Integrated protection of the casing to withstand harsh user • environment.Directly connectable with ONU without any optical socket, • which reduces FTTH cost.High success rate and easiness in installation with average • splicing time 100 sec.Lower requirement for the habit working and work environment • call for to the builder .Visible Installation quality; independent from any far end light • source and special device satisfyingCabling construction in any sectioned way•

Specification

SC series:

Related tools:

FC series:

Fast Termination Connector

PASSIVE OPTICAL COMPONENTThe System of Passive Optical Component Includes the Following Products:Optical Splitter 65Optical Fiber Patch Cord 68Optical Fiber Adapter and Connector 71

Order Information

Netop id Input Port Output Port Fiber Length Grade Fiber TypeN-RPS X XX XX X X

1: 1 port 02: 2 ports 10: 1.0m 1: Grade P 1: 250μm

2: 2 port 03: 3 ports 15: 1.5m 2: Grade S 2: 900μm

04: 4 ports Customized

06: 6 ports

08: 8 ports

12: 12 ports

16: 16 ports

24: 24 ports

32: 32 ports

64: 64 ports

0A: 128 ports

1

Netop id Input Port Output Port Fiber Type Fiber Length Connector/Adapter Type

Connector Surface Module type

N-PSM X XX X XX X X X

1: 1 port 02: 2 ports 0: Adapter 00-Null 0: Null 0: Null A: Plastic module

2: 2 port 03: 3 ports 1: 900μm 10: 1.0m 1: SC 1: UPC B: Metal module

04: 4 ports 2: 2.0mm 15: 1.5m 2: FC 2: APC C: 19" rack-mount

06: 6 ports 3: 3.0mm Customized 3: LC D: Wall-mount

08: 8 ports 4: ST

12: 12 ports

16: 16 ports

24: 24 ports

32: 32 ports

64: 64 ports

0A: 128 ports

OPTICAL SPLITTER

Netop fiber optical splitter can be supplied in different forms, and which provides function of distributing down-link data and converge up-link data. It adopts TDM technology on the down-link and implements RDM-related access protocols on the up-link. To satisfy the requirements of the different application scenarios Netop designs, produces and supplies 19” rack-mountable, modular or individual packed splitter products by applying the most compact integration techniques.

Product Overview

66

Net

op F

TTx-

OD

N T

echn

olog

ies

parameter 1x4 1x8 1x16 1x32 1x641 Operating Wavelength nm 1260-1650

2 Insertion Loss dB Max. 7.2 10.5 13.5 16.5 20

3 Loss Uniformity dB Max. 0.6 0.8 1.2 1.7 2.5

4 Return Loss dB Min. 55 55 55 55 50

5 PDL dB Max. 0.2 0.3 0.3 0.3 0.4

6 Directivity dB Min. 55 55 55 55 55

7 Operating Temperature ℃ -40~85

8 Storage Temperature ℃ -40~85

Specification

Note: All measurements were done at room temperature and specifications exclude connectors.

FeatureLow insertion loss and PDL• FBT and PLC technology• Wide operation wavelength and temperature• High reliability and stability • 1 or 2 input channel • 4, 8, 16, 32 and 64 output channel available• Flexible fanout length and various connector type available•

Optical Splitter

67

Netop FTTx-O

DN

Technologies

parameter 1x4 1x8 1x16 1x32 1x641 Operating Wavelength nm 1260-1650

2 Insertion Loss dB Max. 7.2 10.7 13.7 16.9 21

3 Loss Uniformity dB Max. 0.6 0.8 1.2 1.7 2.5

4 Return Loss dB Min. 55 55 55 55 50

5 PDL dB Max. 0.2 0.3 0.3 0.3 0.4

6 Directivity dB Min. 55 55 55 55 55

7 Operating Temperature ℃ -40~85

8 Storage Temperature ℃ -40~85

9 Packaging Size(L x W x H) mm 40x4x4 40x4x4 40x4x4 50x7x4 60x12x4

Specification

Note: All measurements were done at room temperature and specifications exclude connectors.

FeatureMade of high quality steel sheet or ABS, surface plastic spray• Modularized design, convenient for installation and maintenance • Fiber additional attenuation: ≤0. 1dB• Coiling radius of internal ribbon fiber: >30mm• Operating temperature: -40• ℃~+80℃

Fiber riveted by crimp body at root• Fiber protected by strain relief at root• 1 or 2 input channel• 4, 8, 16, 32 and 64 output channel available• Multi-interface and length to be chosen•

Splitter Module

2Order Information

Single-mode Patch cord or Pigtail

Netop id Fiber Type Diameter Product Type Interface A Interface A Interface B Unit LengthN-98C X X X X X X X XXXX

S: SM riser 2: 2mm 0: Pigtail 1: UPC-UPC 1: ST 1: STM: Meter

Cable length

E: SM LSZH 3: 3mm 1: Patchcord 2: Null 2: SC 2: SC XXX.X meter

I: SM plenum 6: 1.6mm 2: Duplex pigtail 3: APC-APC 3: FC 3: FCF: Feet

Cable length

P: SM G655 riser 8: 1.8mm 3: Duplex patchcord 4: PC-APC 4: LC 4: LC XXX.X feet

Z: SM G657A LSZH 9: 0.9mm 4: Duplex pigtail (separately) 5: APC-PC 5: MU 5: MU 　

5: Duplex patchcord (separately) 6: MT-RJ(F) 6: MT-RJ(F)

7: MT-RJ(M) 7: MT-RJ(M)

8: MTP(F) 8: MTP(F)

9: E2000 9: E2000

A: FSMA A: FSMA

B: MTP(M) B: MTP(M)

C: ESCON C: ESCON

D: SCDC D: SCDC

E: DIN E: DIN

OPTICAL FIbER PATCH CORd

Netop fiber optic patchcord and pigtails, in simplex, duplex or other customized forms are mainly used to link up patch panels and to interconnect the work outlets. Netop supplies all industry-standard connector and cable assemblies which comply with and tested to TIA/IEC standards. The products are 100% tested and individually packed.

Special Patch Cord & Pigtail

Product Overview

Netop id Fiber Type Diameter Product Type Interface A Interface B Unit LengthN-SPC- X X X X X X XXX

A: G.652D A: 2.0mm armorerd cable 1: Pigtail 0: Null 0: Null M: Meter XX.X meter

B: G.657A B: 3.0mm armorerd cable 2: Patchcord 1: SC/APC 1: SC/APC F: Feet XX.X feet

C: G.657B C: 4.0mm Ultru-flexible cable 2: SC/UPC 2: SC/UPC

D: Figure-'8' drop cable 3: LC/APC 3: LC/APC

E: Figure-'8' aerial drop cable 4: LC/UPC 4: LC/UPC

5: FC/APC 5: FC/APC

6: FC/UPC 6: FC/UPC

70

Net

op F

TTx-

OD

N T

echn

olog

ies

Number of fiber 1 2 2Cable Construction Simplex Duplex Mini-Zip-Cord

Cable Cross Section 2.9mm 5.8*2.9mm 1.8*3.7mm

Max. Tensile Strength 400 400 400

Max. Crush Resistance N/cm 15 30 30

Min. Bending Radius mm 30 30 30

Temperature Range

Storage -25 ~ +70

In Operation -5 ~ +70

Specification

FeatureAvailable for all common types of • connectivity systemsCable option: • 0.9mm buffered fiber 1.6-2.0mm simplex/duplex cable 3.0mm simplex/duplex cable Other cable type upon request

Fiber option: • SM G.652D, G.657A and G.657BConnector option: • LC, FC, SC, ST, MU, MT-RJ, MTPUPC & APC polishing available• OFNR, OFNP, LSZH outer sheath • available

Single Mode IL Typical IL Maximum RL Typical RL Maximum

SC; LCUltra UPC 0.20 dB 0.30 dB -55 dB -45dB

Angle APC 0.20 dB 0.30 dB -70 dB -60dB

type Outer Diameter Weight Max.Tensile Strength N Max.Crush

Resistance N/10cm Min Bending Radius

GJFJH-1 4.0mm 19Kg/KmShort term Long term short term Long term Installation Working

200 100 3000 1000 60mm 30mm

Working Temperature -20~+60

Transmission Index@1310nm @1550nm

≤ 0,38dB/Km ≤ 0,25dB/Km

Specification

Feature15mm and 7.5mm small bending radius• No permanent deformation after bending• LC comply with IEC 61754-20• SC comply with TIA/EIA 568, IEC 874-10• The insertion loss test acc.to IEC 61300-3-4• The return loss test acc.to IEC 61300-3-6• SC/UPC and SC/APC connector available•

Optical Fiber Patch Cord / Pigtail

Ultra-flexible patch cord

OPTICAL FIbER AdAPTER ANd CONNECTOR

The fiber-optic couplers are used to link fiber-optic connectors terminated on a fiber-optic cable and are usually mounted in 19” patch panels and fiber face box. Netop couplers provide a saving through low insertion loss interconnection because the fiber is precisely aligned by a ceramic sleeve. The metal body ST- and SC-couplers guarantee a high mechanical long-term stability and reproducible mating. The Small-Form-Factor LC and MT-RJ-coupler enable an increase of density by 100% through interconnecting two fibers provided by the referring MT-RJ and LC-duplex connector.

Product Overview3

72

Net

op F

TTx-

OD

N T

echn

olog

ies

FeatureFC specification according to IEC60874-7 • Twist protection pin • End face geometry ferrule: convex • Materials: • Ferrule: zirconia ceramic Connector body: brass, nickel plated

FeatureComply with international standards • Low coupling loss • Single mode or multimode or both • Metal or plastic housing • Bronze or ceramic alignment sleeves • Simplex or duplex • Flange-less or w/ flange • Hybrids•

SpecificationAdapter C-sleeve material: • CeramicColor rule for composite plastic adapter: • Blue: SM, Beige: MM, Green: SM APCInstallation: • With or without mounting flange/ square or D-D mounting flangeInsertion loss: • <= 0.2dB against reference connectorsOperating temperature: • -40℃ ~ +75℃

Optical Fiber Adapter

FeatureEN 50173 recommended connector • With push-pull-locking mechanism • SC specification according to TIA/EIA 568 AND IEC874-14• Materials: • Ferrule: zirconia ceramic Connector body: composite plastic

SpecificationInsertion loss (typical): 0.20dB• Fiber types: G62.5/125um, G50/125um,E9/125um • Cable adaption: 0.9mm, 2.0mm, 2.9mm • Other cable adaptions upon request•

SpecificationInsertion loss (typical): 0.20dB• Fiber types: G62.5/125um, G50/125um,E9/125um • Cable adaption: 0.9mm, 2.0mm, 2.9mm • Other cable adaptions upon request•

SC Fiber Optic Connector FC Fiber Optic Connector

Fiber Optic Connector

73

Netop FTTx-O

DN

Technologies

FeatureSmall form factor connectivity system, high end cabling for telecomand LAN, within single-mode application• Materials: • Ferrule: zirconia ceramic, diameter 1.25mm Connector body: composite plastic

SpecificationInsertion loss (typical) : 0.1dB• Cable adaption: • 0.9mm buffered fiber 1.6 ~ 2.0mm simplex/duplex cable 2.9mm simplex/duplex cable Other cable adaptions upon request• Other fiber optic connector•

LC Fiber Optic Connector

Other Connector Can Be Provided upon Request.

FC Fiber Optic Connector

74

Net

op F

TTx-

OD

N T

echn

olog

ies

NETOP SERVICENetop offers professional services that improve network design, reliability, scalability and efficiency.

Our service core competences include:Network optimization • Technical consultation • Customized product design • Installation & commissioning • Onsite training & supervision • System troubleshooting• After-sales services•

In addition, we also offer professional training, technical support and workshops for distributors and agents. We are committed to offering our services in anyway, anywhere and at anytime.

Netop is much more than just a supplier – Netop is a valued development partner and we will strive to devote all effort to meet new challenges in order to scale to new heights.

75

Netop FTTx-O

DN

Technologies

Netop Technology Co., Ltd.B2, No. 303, Xinke Road, QingpuIndustrial Zone, Shanghai, ChinaPost Code: 201707Tel: (+8621) 69214567Fax: (+8621) 69214018www.netop-technology.com

Product Specifications N-10xabc-1A 3HU Fiber Optic Splice Panel



H103410JS023NT-

TQ23

3_R

07/4

.0

Features

Suit for all common types of factory or on-site assembled OF cables

with excellent performance and easy installation

High reliability, High flexibility, High integrated design

Integration cable management panel, easy to support and fix fiber

optic cables

Modular design, detachable front plate, with good versatility

Simultaneity satisfies 9 indoor or outdoor cable entry by using new

cable entry structure Applications

ISO / IEC 8802-3:FOIRL

ISO / IEC 8802-3:10BASE-FL, FP & FB




ATM at 52Mbit/s

ATM at 155Mbit/s

ATM at 622Mbit/s





ISO / IEC 8802-3:1000BASE-SX


ISO / IEC 9314-9:FDDI LCF-PMD

ISO / IEC 9314-4:FDDI SMF-PMD







Specifications

Dimensions:


3HU Sliding Splice Panel 520 x 400 x 3HU

Twist secure supports for max. 8 splice cassettes

Simultaneity satisfies for 9 cables clamping

Inputs cables protected by soft plastic bellows

Replaceable front plate, easy for various of adaptors

Support up to 96 fibers for FC, ST simplex adaptors

Support up to 96 fibers for SC simplex adaptors

Support up to 96 fibers for SC duplex adaptors

Support up to 192 fibers for LC duplex adaptors

Support up to 96 fibers for DIN simplex adaptors




H103410JS023NT-

TQ23

3_R

07/4

.0

Outline Drawing

Label panel

Replaceable front plate

Cable management panel

19" Frame mounting hole

Cable fixed panel

Cable entrance




H103410JS023NT-

TQ23

3_R

07/4

.0

Ordering Information Fixed Splice Panel

Examples

N-10A574-1A 3 HU Fixed Splice Panel, SC/SC Duplex SM, 32 Fibers, Beige

N-10A5D4-1A 3 HU Fixed Splice Panel, SC/SC Duplex SM, 36 Fibers, Beige

N-10A5G4-1A 3 HU Fixed Splice Panel, SC/SC Duplex SM, 64 Fibers, Beige

N-10A5E4-1A 3 HU Fixed Splice Panel, SC/SC Duplex SM, 72 Fibers, Beige

N-10A5F4-1A 3 HU Fixed Splice Panel, SC/SC Duplex SM, 96 Fibers, Beige

Sliding Splice Panel

Examples

N-10G574-1A 3 HU Sliding Splice Panel, SC/SC Duplex SM, 32 Fibers, Beige

N-10G5D4-1A 3 HU Sliding Splice Panel, SC/SC Duplex SM, 36 Fibers, Beige

N-10G5G4-1A 3 HU Sliding Splice Panel, SC/SC Duplex SM, 64 Fibers, Beige

N-10G5E4-1A 3 HU Sliding Splice Panel, SC/SC Duplex SM, 72 Fibers, Beige

N-10G5F4-1A 3 HU Sliding Splice Panel, SC/SC Duplex SM, 96 Fibers, Beige Part Number: N-10xabc-1A

N- x-Height A:3HU Fixed Splice Panel; B:3HU Modular Splice Panel; G: 3HU sliding splice panel;

a-Adaptor

1: SC/SC simplex SM, 2: ST/ST simplex SM, 3: ST/ST Duplex SM, 4: SC/SC simplex MM,

5: SC/SC Duplex SM,6: SC/SC Duplex MM, 7: SC/ST Duplex SM, 8: SC/ST Duplex MM,


D: LC/LC Duplex MM, E FC/FC simplex, F: Blank, G: SC/APC simplex; H: DIN/DIN;

K: E2000/APC; L: MPO/MPO

b-Fibers 4: 48 Fibers, 7: 32 Fibers; D: 36 Fibers. E: 72 Fibers. F: 96 Fibers. G: 64 Fibers;

c-Color 0: Metal, 2: Grey, 3: White, 4: Beige, 5: Black

1A-Meterial 1A: Steel body & front plate

Product Specifications N-10xabc-d Swing Splice Fiber Optic Panel



Page 1 of 3 H103410CP024

Main Features

Integration cable management panel, easy to support and fix fiber optic cables

Changeable adaptor panel (FC, SC, LC)

Modular design, detachable front plate, has good versatility

Simultaneity satisfies 36 fibers or 48 fibers outdoor cable

entry by using new cable entry structure

Swing structure is better protected in coming cable and

out-going cable

Application

FTTH

Central office

Broadband fiber-optics network

Technical Performance

The outer shape of CPL (Center Patching Location) patch panel complies with standard 19” Integration cable

management panel, easy to support and fix fiber optic cables

Beige powder coating for CPL patch panel meets RoHS requirements

Storage temperature：-40℃～+70℃

Operation temperature: -20℃～+60℃

Relative humidity：≤85%（+30℃）

Atmospheric pressure：70kPa～106kPa

NT-

TQ23

3_R

07/4

.0




Page 2 of 3 H103410CP024

Mechanical Performance

Fixed installation with 19” EIA rack

Dimensions: 436x 310x 2HU (2HU Swing Splice panel)

Max capacity of different types：

1HU 2HU 3HU 4HU

FC, ST simplex 24 48 72 96

SC simplex 12 32 48 64

SC duplex 24 64 96 128

LC duplex/MT-RJ 48 96 144 192

DIN simplex 24 64 96 128

Outline Drawing

NT-

TQ23

3_R

07/4

.0




Page 3 of 3 H103410CP024

Part Number Options:

x-Height K:1HU Swing Splice panel; L:2HU Swing Splice Panel; M:3HU Swing Splice Panel;

N:4HU Swing Splice Panel

a-Adaptor

1: SC/SC simplex SM, 2: ST/ST simplex SM, 3: ST/ST Duplex SM, 4: SC/SC simplex MM, 5: SC/SC

Duplex SM,6: SC/SC Duplex MM, 7: SC/ST Duplex SM, 8: SC/ST Duplex MM, 9: ESCON/ST MM,

A: MT-RJ/MT-RJ SM, B: MT-RJ/MT-RJ MM, C: LC/LC Duplex SM, D: LC/LC Duplex MM, E FC/FC

simplex, F: Blank, G: SC/APC simplex; H: DIN/DIN; K: E2000/APC; L: MPO/MPO

b-Fibers

1: 0 Fiber, 2: 12 Fibers, 3: 24 Fibers, 4: 48 Fibers, 6: 8 Fibers, 7: 32 Fibers, 8: 4 Fibers,

C: 6 Fibers; D: 36 Fibers. E: 72 Fibers. F: 96 Fibers. G: 64 Fibers. H: 144 Fibers.

c-Color 0: Metal, 2: Grey, 3: White, 4: Beige, 5: Black

d-Material 1: Aluminum body & front plate, 1A: Steel body & front plate

NT-

TQ23

3_R

07/4

.0

Product Specifications Fiber Faceplate Box



Page 1 of 4 NT-

TQ23

3_R

07/4

.0

H110130YW08

Fiber Optic Faceplate Box- Type A

Features

Suitable for 1-4 cores indoor drop cable

Various connector interface available

Top and bottom cable entry hold available

With hinge and lock protection

Dimension: 160mm x 96mm x 30mm

Compatible with three connection methods

Directly terminate drop cable with field installable FO connector

Connect drop cable and FO pigtail with mechanical splice kit

Connect drop cable and FO pigtail by fusion splicing

As option a 0.5 meter length Singlemode FO pigtail can be included

Installation Instruction

1 2 3 4

1. Fixing slot for fusion splice

protection tube: 2 places

2. Wall mounting hole: 4 places

3. Fiber entry hole: 2 places

4. Fiber holder: 2 places

5. Fixing slot for adapter: 2 places

3 5




Page 2 of 4 NT-

TQ23

3_R

07/4

.0

H110130YW08

Fiber Optic Faceplate Box- Type B

Features


Various interface available

Rear and bottom cable entry hold available

Dimension: 86mm x 86mm x 27.5mm

Compatible with three connect methods

Directly connect drop cable with field installable FO connector




Installation Instruction




Page 3 of 4 NT-

TQ23

3_R

07/4

.0

H110130YW08

Fiber Optic Faceplate Box- Type C

Features

Suitable for 1-2 cores indoor drop cable and various FO interfaces

available. With exchangeable port adapter, clear concise labeling

makes 45 degree faceplates more flexible and professional, together

with attached mounting screws, individual package and standard beige

color provide you the excellent solution for the working area.

Fiber Optic Faceplate Box- Type D

Features


Various interface available

Dimension: 150mm x 30mm x 110mm

Compatible with three connect methods

Directly connect drop cable with field installable FO connector







Page 4 of 4 NT-

TQ23

3_R

07/4

.0

H110130YW08


Adapter Type Connectivity Ports Pigtail Type Series

N-FFB- X X X X

0: Without adapter 0: Null 0: without pigtail A: A Type

1: SC/APC simplex 1: 1 port and 1 pigtail 1: Φ2.0mm, G.652D pigtail B: B Type

2: SC/UPC simplex 2: 2 ports and 2 pigtails 2: Φ2.0mm, G.657A pigtail C: C Type

3: LC/APC duplex 4: 4 ports and 4 pigtails 3: Φ0.9mm, G.652D pigtail D: D Type

4: LC/UPC duplex 4: Φ0.9mm, G.657A pigtail

Customized

Date post:	23-Aug-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Product Specifications Fiber.pdf · ·FTTX ·Fiber interface system ·Fiber transmission system...

Documents