Product Specifications Fiber Distribution Unit
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 1 of 5 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H101710JS080
Outdoor FDU
Features and functions
- Suitable for outdoor installation with IP65 protection
- Wall mount and pole mount available
- External cable can either be loose tube cable or slotted cable
- Output cable can either be optical fiber cord or drop cable
- Fiber additional attenuation: ≤0. 1dB
- Fiber bending radius: ≥30mm
- Axes orientation tensile strength: ≥1000N
- Crush resistance: ≥2000N/100mm
- Operating temperature: -20℃~+60℃
24F Outdoor FDU 24F Outdoor FDU
Product Specifications Fiber Distribution Unit
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 2 of 5 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H101710JS080
Outdoor FDU with Adapter Features and functions
-Suitable for outdoor installation with IP65 protection
- Wall mount and pole mount available
- Various interface available SC, FC or LC
- Fiber additional attenuation: ≤0. 1dB
- Fiber bending radius: ≥30mm
- Axes orientation tensile strength: ≥1000N
- Crush resistance: ≥2000N/100mm
- Operating temperature: -20℃~+60℃
4F Outdoor FDU-SC
24F Outdoor FDU-SC 12F Outdoor FDU-LC 8F Outdoor FDU-LC
Product Specifications Fiber Distribution Unit
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 3 of 5 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H101710JS080
Indoor FDU Features and functions
- Wall mount,dust preventable
- Made of high quality steel sheet, surface plastic spray
- Fiber additional attenuation: ≤0. 1dB
- Fiber bending radius: ≥30mm
- Operating temperature: -20℃~+60℃
24F Indoor FDU-SC
12F Indoor FDU-SC
Product Specifications Fiber Distribution Unit
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 4 of 5 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H101710JS080
Part Number
P/N Description Dimension
W x H x D(mm) Splice tray
counts(Max)
N-FDU-1001012B 12F Outdoor FDU, SPCC 230 x 350 x 100 1
N-FDU-1001024B 24F Outdoor FDU, SPCC 230 x 350 x 100 2
N-FDU-1001048B 48F Outdoor FDU, SPCC 230 x 350 x 110 4
N-FDU-1121004D 4F Outdoor FDU,SC/APC simplex, SPCC 200 x 250 x 55 1
N-FDU-1411012D 12F Outdoor FDU,LC/UPC duplex, SPCC 230 x 290 x 70 1
N-FDU-1111024D 24F Outdoor FDU,SC/UPC simplex, SPCC 230 x 350 x 110 2
N-FDU-1111048D 48F Outdoor FDU,SC/UPC simplex, SPCC 350 x 380 x 110 4
N-FDU-1121096D 96F Outdoor FDU,SC/APC simplex, SPCC 500 x 480 x 200 8
N-FDU-2001012B 12F Indoor FDU, SPCC 190 x 290 x 80 1
N-FDU-2001024B 24F Indoor FDU, SPCC 190 x 290 x 80 2
N-FDU-2001048B 48F Indoor FDU, SPCC 190 x 290 x 100 4
N-FDU-2111012D 12F Indoor FDU,SC/UPC simplex, SPCC 250 x 200 x 70 1
N-FDU-2411012D 12F Indoor FDU,LC/UPC duplex, SPCC 230 x 290 x 70 1
N-FDU-2111024D 24F Indoor FDU,SC/UPC simplex, SPCC 300 x 310 x 85 2
N-FDU-2111048D 48F Indoor FDU,SC/UPC simplex, SPCC 300 x 310 x 100 4
N-FDU-1411008A 8F Outdoor FDU,LC/UPC duplex, SPCC 240 x 290 x 70 0
N-FDU-1412024A 24F Outdoor FDU,LCD/UPC, stainless steel 240 x 290 x 80 0
N-FDU-2411024A 24F Indoor FDU,LCD/UPC, SPCC 240 x 290 x 80 0
N-FDU-2411024C 24F Indoor FDU,LCD/UPC, SPCC, with pigtail 240 x 290 x 80 2
N-FDU-2411048C 48F Indoor FDU,LCD/UPC, SPCC, with pigtail 250 x 350 x 90 4
Product Specifications Fiber Distribution Unit
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 5 of 5 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H101710JS080
Ordering Information
Netop ID
Environment Adapter type InterfaceCabinet material
Max. capacity Splice
tray/pigtail N-FDU- X X X X XXX X
1: Outdoor 0: no adapter 0: no
adaptor
1: SPCC 002: 2cores A: no splice tray
2: Indoor 1: SC simplex 1: UPC 2: Stainless
steel
004: 4cores B: no pigtail
2: SC duplex 2: APC 3: SMC 008: 8cores C: with 0.9mm
pigtail 2m
3: LC simplex 012: 12cores D: with 2.0mm
pigtail 2m
4: LC duplex 024: 24cores E: with 3.0mm
pigtail 2m
5: FC simplex 036: 36cores
6: ST simplex 048: 48cores
7: MPO adaptor 072: 72cores
096: 96cores
Product Specifications Cross Connection Cabinet
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 1 of 7 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
1
F100110LZ001
Your Partner For Network Optimization
NT-
TQ23
3_R
07/4
.0
Stainless Cabinet Optical Cable Cross Connecting Cabinet (hereafter named OCC) is used to connect the fiber trunk cable and the distribution cable between
the interface devices, which has the import of cable, fastness, grounding protection, welding, jumping (distribution), storage, switching and
other functions. With a high versatility in the optical route, especially for fiber optical communication system into a central office trunk
cable and distribution side, can achieve the fiber optic lines linked, distributed and transited easily.
Product feature
·Cabinet is made of high strength stainless steel, protection class IP65, high intension,corrosion‐resistant, all weatherproof and can resist
accidental damage or malignant destruction. With double‐layer structure, filled with non‐combustible and a better insulation effect of the
molding quartz glass wool in the middle, greatly enhanced the cabinet effect of heat insulation, and flame‐retardant properties
·All cabinet corners using a dedicated rounded mold forming, surface treatment using drawing or electrostatic spray, aesthetic appearance.
·The special cabinet inside and outside gas convection channel can prevent water vapor coagulation effectively
·Three‐point locking pins, safety and reliability.
·Closed cabinet structure, supply the cable terminal and distribution with physical protection, prevent the optical fiber cable from
accidental damage.
·Cable entrance from the rack at the bottom and be fixed, grounding and protection.
·Equipped with an integrated fiber‐optic splice wiring module set fiber fusion welding, pigtail to accommodate and distribution all in one,
easy to use and maintain. Card installed FC, SC adapter, the adapter was 30 ° row of cloth, which ensures that the fiber bending and a half
by ≥ 40mm, avoiding the laser burns the human eye and optical fiber connectors to be injured when scheduling the roots. with a clear
fiber‐optic distribution sign.
Applications
·FTTX
·Fiber interface system
·Fiber transmission system
Table 1 Table of Accessories configuration
Accessories name Qty. Unit OCC User manual 1 ea Certification 1 ea Expansion Screw 4 set Nylon ties 20 ea Key 1 ea Fiber protecting tube 1 set Fiber heat‐shrinkable tube 1 set 3M tape 1 ea
Product Specifications Cross Connection Cabinet
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 2 of 7 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
2
F100110LZ001
Your Partner For Network Optimization
NT-
TQ23
3_R
07/4
.0
A Double‐layer stainless steel cabinet
B Optical Fiber Fusion and DistributionIntegrated Module
C Optical splice Unit
D Cable import Unit
E Double‐layer stainless steel front door
F Cabinet bottom
Product Specifications Cross Connection Cabinet
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 3 of 7 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
3
F100110LZ001
Your Partner For Network Optimization
NT-
TQ23
3_R
07/4
.0
144F Stainless cabinet
Specification Comply with YD/T998‐2007
Connecter loss(including insertion, Changeability and Durability)≤0.5dB
Insert loss≤0.2dB
Return loss:PC≥40dB UPC≥50dB APC≥60dB
Connector life>1000 times
Insulation resistance (between frame and protection grounding)>20000MΩ/500V(DC)
Dielectric strength (between frame and protection grounding)>3000V(DC)/1min no breakdown, no arc.
Dimension:1350×650×320(mm)
Installation dimension:600×200(mm)
Single side operation
Weight:150 Kg
Working environment:
Environment temperature:‐40℃~80℃
Relative humidity:≤85%(40℃)
Atmosphere pressure:70~106kpa
Installation
Frame, floor, wall mounted
The series OCC bottom has four φ13 holes, which can be pre‐installed into the M10 expansion bolts on the base
Put on the OCC with the fastening nuts
Product Specifications Cross Connection Cabinet
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 4 of 7 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
4
F100110LZ001
Your Partner For Network Optimization
NT-
TQ23
3_R
07/4
.0
288F Stainless cabinet
Specification
OCC standard:YD/T988‐2007
Connecter loss(including insertion, Changeability
and Durability)≤0.5dB
Insert loss≤0.2dB
Return loss:PC≥40dB UPC≥50dB APC≥60dB
Connector life>1000 times
Insulation resistance (between frame and
protection grounding)>20000MΩ/500V(DC)
Dielectric strength (between frame and protection
grounding)>3000V(DC)/1min no breakdown,
no arc
Dimension:1450×750×320(mm)
Installation dimension:700×200(mm)
Single side operation
Weight:185 Kg
Working environment:
Environment temperature:‐40℃~80℃
Relative humidity:≤85%(40℃)
Atmosphere pressure:70~106kpa
Installation
Frame, floor, wall mounted
The series OCC bottom has four φ13 holes, which can be pre‐installed into the M10 expansion bolts on the base.
Put on the OCC with the fastening nut.
Product Specifications Cross Connection Cabinet
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 5 of 7 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
5
F100110LZ001
Your Partner For Network Optimization
NT-
TQ23
3_R
07/4
.0
576F Stainless cabinet
Specification
OCC standard:YD/T988‐2007
Connecter loss(including insertion,Changeability and Durability)≤0.5dB
Insert loss≤0.2dB
Return loss:PC≥40dB UPC≥50dB APC≥60dB
Connector life>1000 times
Insulation resistance (between frame and protection grounding)>20000MΩ/500V(DC)
Dielectric strength (between frame and protection grounding)>3000V(DC)/1min no breakdown, no arc
Dimension:1450×750×320(mm)
Installation dimension:700×460(mm)
Double side operation
Weight:225 KG
Working environment:
Environment temperature:‐40℃~80℃
Relative humidity:≤85%(40℃)
Atmosphere pressure:70~106kpa
Installation
Frame, floor, wall mounted
The series OCC bottom has four φ13 holes, which can be pre‐installed into the M10 expansion bolts on the base. Put on the
OCC with the fastening nut.
Product Specifications Cross Connection Cabinet
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 6 of 7 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
6
F100110LZ001
Your Partner For Network Optimization
NT-
TQ23
3_R
07/4
.0
N-OCC-76801B 768F Outdoor SMC Double-Side OCC Applications
The advanced design of double‐sided operation and divided management make the operation and maintenance very
easy. So it’s easy to update the network.
Features and functions 1. Cabinet material SMC reinforced thermoplastic material anti septic, anti corrosive and preservative up to 50
years. Size1450 x 750 x 360(mm)
2. Capacity ‐ 8 drawers house 2 groups of 4 splice trays per stack. Expandable to 3 groups
3. Splice tray accommodate minimum 12/24 splices
4. Cable entry from front and back for easy access and cable management
5. Both doors front and back accessible during maintenance and servicing
6. Electronic 3 point linkage locking on both doors
7. Cable entry fixed system ‐ up to minimum 32 cablesEach side 18 cables fasteners.
8. 2 group of splice tray accommodate minimum 700 fiber splices per cabinet Additional 1 group splice tray accommodate up to 350 fiber
splices (optional)
9. Sliding splice tray drawer for easy access
10. Cable entry fixed system ‐ up to minimum 32 cables Each side 18 cables fasteners
11. Suitable for outdoor installation with IP65 protection
Product Specifications Cross Connection Cabinet
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 7 of 7 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
F100110LZ001NT-
TQ23
3_R
07/4
.0
Ordering Information
Optical Cross Connection Cabinet
Netop ID
Max.
distribution capacity
Adapter type
InterfaceBody
materialOperation
type Core number
require Pigtail Loaded
N- OCC- XXX X X X X XXX X
144 0:
Null 0:
Null 1:
SMC
A: Single face
024: 24cores
0: without pigtail
288 1: SC
Simplex 1:
UPC
2: Stainless
steel
B: Double
face
072: 72cores
1: with 0.9mm
pigtails
576 2: SC
Duplex 2:
APC 3:
SPCC
192: 192cores
customerized pigtails
768 3: FC
Simplex
384: 384cores
4:LC
duplex
Full loaded Or
customerized
Product Specifications N-ODF-XXXXXXXXX Optical Distribution Frame
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 1 of 3 H101310GM001
Features
Long-term layout for future optical distribution system expansion
Modular design makes capacity increasing easily
Excellent fiber cord management with excess cable storage
Adapt to optic access networks cosmically with enormous core capacities
High density design with good maneuverability
Suitable for ribbon fanout or breakout cable assembly
Various interface available SC, ST, FC or LC
Empty frame with splice tray or pre-install adapters and pigtails
Critical elements control of cable bending radius, cable routing paths, cable access and physical protection
High-quality steel sheet frame with surface plastic spray
ABS plastic cable splice tray with cover
Comply with MII standard YD/T778-1999 and relevant international standards
Applications
FTTx central office
Data Center
Long-distance optical transmission network
Optical access network
Video transmission network
Data communication network
Operation Conditions
Transport and Storage temperature:-40℃ ~ +70℃
Operation temperature:-10℃ ~ +50℃
Relative humidity:≤85%(+30℃)
Atmosphere pressure:70 kPa ~106 kPa
Product Specifications N-ODF-XXXXXXXXX Optical Distribution Frame
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 2 of 3 H101310GM001
Figures
A Type B Type
C Type D Type
E Type 12-Fiber Splice Tray
Product Specifications N-ODF-XXXXXXXXX Optical Distribution Frame
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 3 of 3 H101310GM001
Specifications
Item Type Size(mm) Capacity(fiber) 1 N-ODF-A20XXXXXX 2000×860×320 ≤576 2 N-ODF-A22XXXXXX 2200×860×320 ≤624 3 N-ODF-A26XXXXXX 2600×860×320 ≤792 4 N-ODF-B20XXXXXX 2000×800×320 ≤696 5 N-ODF-B22XXXXXX 2200×800×320 ≤792 6 N-ODF-B26XXXXXX 2600×800×320 ≤936 7 N-ODF-C20XXXXXX 2000×600×320 ≤288 8 N-ODF-C22XXXXXX 2200×600×320 ≤288 9 N-ODF-C26XXXXXX 2600×600×320 ≤384 10 N-ODF-D20XXXXXX 2000×240×320 ≤144 11 N-ODF-D22XXXXXX 2200×240×320 ≤144 12 N-ODF-D26XXXXXX 2600×240×320 ≤192 13 N-ODF-E20XXXXXX 2000×650×320 ≤648 14 N-ODF-E22XXXXXX 2200×650×320 ≤696 15 N-ODF-E26XXXXXX 2600×650×320 ≤792
Ordering Information
Netop ID Frame type Frame high Adapter type Interface Port counts Pigtail Loaded
X XX X X XXX X
N-ODF- A:A series 20:2000mm 0:Null 0: Null 000:Null 0: without pigtail
B:B series 22:2200mm 1:SC 1: UPC 1: with 0.9mm pigtails
C:C series 26:2600mm 2:FC 2: APC
D:D series 3:LC Duplex
E:Open Frame 4:ST
Product Specifications N-ODU-XXXXXX Optical Distribution Unit
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 1 of 5 H101310GM006
Features
Universal installation
ODF and IDF installable
19” rack mountable
Flexible cell capacity (24F, 36F, 48F, 72F, 96F)
Optional interface (SC/PC, SC/APC, FC/PC, FC/APC, ST/PC,
LC/UPC, MU/UPC)
Sliding splice tray configuration
Cable patching guider
Easy-access design (All-front operation)
Applications
FTTx central office
Data Center
Long-distance optical transmission network
Optical aaccess network
Video transmission network
Data communication network
Operation Conditions
Transport and Storage temperature:-40℃ - +70℃
Operation temperature:-10℃ - +50℃
Relative humidity:≤85%(+30℃)
Atmosphere pressure:70 kPa -106 kPa
Product Specifications N-ODU-XXXXXX Optical Distribution Unit
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 2 of 5 H101310GM006
Figures
24-Fiber ODU
36-Fiber ODU
48-Fiber ODU
Product Specifications N-ODU-XXXXXX Optical Distribution Unit
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 3 of 5 H101310GM006
72-Fiber ODU
96-Fiber ODU
Stainless steel gemel Outlet cable Protection-slot
Product Specifications N-ODU-XXXXXX Optical Distribution Unit
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 4 of 5 H101310GM006
Side-glance figure
12-Fiber Splice Tray
Inlet cable fixer Front door locker
Cable central strength member holder
Product Specifications N-ODU-XXXXXX Optical Distribution Unit
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 5 of 5 H101310GM006
Specifications
Item P/N Size(mm) Capacity(fiber) 1 N-ODU-2024XXX 483×300×88(2HU) ≤24 2 N-ODU-3036XXX 483×300×130(3HU) ≤36 3 N-ODU-4048XXX 483×300×130(3HU) ≤48 4 N-ODU-6072XXX 483×300×175(4HU) ≤72 5 N-ODU-8096XXX 483×300×265(6HU) ≤96
Ordering Information
Netop ID Tray counts Port counts Adapter type Interface Pigtail Loaded X XXX X X X N-ODU- 2: 2pcs 000:Null 0: Null 0: Null 0: without pigtail 3: 3pcs 1: SC 1: UPC 1: with 0.9mm pigtails 4: 4pcs 2: FC 2: APC 6: 6pcs 3: LC Duplex 8: 8pcs 4: ST
Product Specifications FBT Splitter Module
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 1 of 3 H101710DF070N
T-TQ
233_
R07
/4.0
Product Summary
Fused splitter is built by asymmetric coupling technique. The operating bandwidth of this normal coupler is expanding
to ±40nm, and the ultra broadband coupler is expanding to ±80nm. The fused splitter has the same coupling ratio on
both 1310nm and 1550nm communication windows, and with low excess loss and low PDL. Fused splitters are
widely used for communication systems, CATV, and FTTH.
Features Low excess loss
Low PDL
Dual operating window
High stability and reliability
Multiple Splitting ratio for select
Fused Splitter Applications
Optical communication systems
DWDM Network
High-speed LAN
Optical Fiber Sensor
CATV
FTTH
Fused Splitter Module
Product Specifications FBT Splitter Module
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 2 of 3 H101710DF070N
T-TQ
233_
R07
/4.0
Specifications
SM Dual/Triple Window Fused Splitter
Grade P A
Excess Loss(Typ.)(dB) 0.10 0.15
I.L max.(dB) 3.6 3.8
Uniformity(dB) 0.7 1.0
PDL(dB) 0.10 0.15
Operating
Wavelength(nm)
1310/1550±40,1310±40&1490±10,
1310/1550±40 &1490±10
or Customized
Ratio(%) 50/50
Directivity(dB) ≥55
Operating Temp.(℃) -20~+70
Storage Temp. (℃) -40~+85
I/O Window 1x2 or 2x2
Package Size(mm) A ,B,C,D,M
A:3mm x 35mm Stainless steel tube
B:5mm x 70mm Stainless steel tube
C:3mm x 35mm Stainless steel tube
D:90mm x 20mm x 9.5mm Plastic box
E:100mm x 80mm x 10mm Plastic box
F:141mm x 115mm x 18mm Plastic box
M:3mm x 35mm Stainless steel tube
Ratio / Insertion Loss
Ratio (%) Insertion Loss(dB)
Grade P A
40/60 4.7/2.7 5.0/2.9
30/70 6.0/1.9 6.4/2.1
20/80 7.9/1.2 8.5/1.4
10/90 11.3/0.6 12.7/0.8
05/95 14.0/0.45 17.5/0.5
01/99 19~21/0.1~0.2 21.5/0.25
Product Specifications FBT Splitter Module
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 3 of 3 H101710DF070N
T-TQ
233_
R07
/4.0
Order Information
FBT Splitter
FBT Splitter Input Port Output Port _ Fiber Type Coupling Ratio Pigtail Type Fiber Length
N-FS X XX X XX X XX
1: 1port 02: 2ports 1: 50/125um 10: 10:90 1: 250um 10: 1.0m
2: 2port 03: 3ports 2: 62.5/125um 20: 20:80 2: 900um 15: 1.5m
04: 4ports 3: 9/125um 30: 30:70 Customized
08: 8ports 40: 40:60
09: 9ports 50: 50:50
10: 10ports Customized
FBT Splitter Module
FBT
Splitter
Module
Input
Port
Output
Port _ Fiber Type Wavelength
Coupling
Ratio Pigtail
Type
Fiber
Length Connector/
adaptor
Connector
Surface Module type
N-FSM X XX X XX XX X XX X X X
1:
1port
02:
2ports
1:
50/125um 08: 850nm 10: 10:90
0:
adaptor00: Null 0: Null 0: Null
A: Plastic
Module
2:
2ports
03:
3ports
2:
62.5/125um 13: 1310nm 20: 20:80
1:
900um10: 1.0m 1: SC 1: UPC
B: Metal
Module
04:
4ports
3: 9/125um 14: 1490nm 30: 30:70
2:
2.0mm15: 1.5m 2: FC 2: APC
C: 19"
rack-mount
08:
8ports
15: 1550nm 40: 40:60
3:
3.0mmCustomized 3: LC
D:
wall-mount
09:
9ports
34:
1310/1490nm45: 45:55 4: ST
10:
10ports
35:
1310/1550nm50: 50:50
Customized A: Average
Customized
Product Specifications Splitter Distribution Cabinet
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 1 of 5 H101310XD064
Applications These series products provide a high density splitting and distribution management of optical fiber cable. The
advanced design of double-sided operation and divided management make the operation and maintenance very
easy. The modularization-design supports the splitter-module for 2x16, 2x32 and more splitting-rate module. So it’s
easy to update the network.
384F Double-Side Outdoor SDC Features and functions - Body case is made of high-quality steel sheet, surface plastic spray
- Double-sided operation(front and rear), divided management
- Suitable for outdoor installation with IP65 protection
- Whole hinge lock, fixed with three points
- Various interface available SC, FC or LC
- Max fiber capacity: 384
- Supports up to 12pcs 1×32 (2×32) splitter modules or 24pcs 1×16 splitter modules
- Parking lot accommodates up to 288 splitter output ports
- Supports pre-connected cable or splicing cable
- Provides the fixture and grounding device for 6 outdoor cables
- Dimension(mm): 1200×600×320
SDC-111B384
Product Specifications Splitter Distribution Cabinet
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 2 of 5 H101310XD064
192F Double-Side Outdoor SDC Features and functions - Body case is made of high-quality steel sheet, surface plastic spray
- Double-sided operation(front and rear), divided management
- Suitable for outdoor installation with IP65 protection
- Whole hinge lock, fixed with three points
- Various interface available SC, FC or LC
- Max fiber capacity: 192
- Supports up to 6pcs 1×32 (2×32) splitter modules or 12pcs 1×16 splitter modules
- Parking lot accommodates up to 144 splitter output ports
- Supports pre-connected cable or splicing cable
- Provides the fixture and grounding device for 6 outdoor cables
- Dimension(mm): 900×600×300
SDC-111B192
Product Specifications Splitter Distribution Cabinet
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 3 of 5 H101310XD064
144F Single-Side Outdoor SDC Features and functions - Body case is made of high-quality steel sheet, surface plastic spray
- Single-sided operation with middle activity operation panel
- Suitable for outdoor installation with IP65 protection
- Whole hinge lock, fixed with three points
- Various interface available SC, FC or LC
- Max fiber capacity: 144
- Supports up to 5pcs 1×32 (2×32) splitter modules or 9pcs 1×16 splitter modules
- Parking lot accommodates up to 48 splitter output ports
- Supports pre-connected cable or splicing cable
- Provides the fixture and grounding device for 12 outdoor cables Max.
- Dimension(mm): 1000×600×300
SDC-111A144
Splitter Module
Splitter Distribution
Parking Lot
Splice Tray Box with SC Adaptors
Middle Activity Operation Panel
Product Specifications Splitter Distribution Cabinet
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 4 of 5 H101310XD064
32F Single-Side Outdoor SDC Features and functions - Body case is made of high-quality steel sheet, surface plastic spray
- Single door, front operation, divided management
- Wall mount and pole mount available
- Suitable for outdoor installation with IP65 protection
- Various interface available SC, FC or LC
- Max fiber capacity: 32
- Supports up to 1pc 1×32 (2×32) splitter modules or 2pcs 1×16 splitter modules
- Parking lot accommodates up to 32 splitter output ports
- Supports pre-connected cable or splicing cable
- Provides the fixture and grounding device for 4 outdoor cables
- Dimension(mm): 500×480×110
SDC-111A032
Product Specifications Splitter Distribution Cabinet
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 5 of 5 H101310XD064
Ordering Information
Netop ID Environment Adapter type
Interface Cabinet material
Operation Type
Installation Max. distribution capacity
Pigtail Loaded
N-SDC- X X X X X X XXX X
1:Outdoor 1: SC simplex
1: UPC 1:SPCC A: Single face
1: Wall mount 032 0: without pigtail
2:Indoor 2: SC duplex
2: APC 2:Stainless steel
B: Double face
2: Free-standing
072 1: with 0.9mm pigtails
3: LC simplex
3:SMC 144 With customerized pigtails
4: LC duplex
192
5: FC Simplex
288
384
Product Specifications Fast Termination Connector
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 1 of 5 NT-
TQ23
3_R
07/4
.0
H101710DF099
Application FTTH, FTTD, FTTO
Rebuilding the wiring in optical equipment rooms
Core Splice Technology
Pluggable non-preset stub technology Coaxial aligning of precision ceramics
Axial elastically fitting of optical fiber Multi-point fastener
Inner structure
Product Specifications Fast Termination Connector
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 2 of 5 NT-
TQ23
3_R
07/4
.0
H101710DF099
Field Assembly Connector Construction Features
Based on the unique Rosenberger pluggable non-preset tube technology
Precision ceramic components with co-axial self centering, excellent and durable optical property
Optical fiber fits axially in elastic way and avoids completely any false connect
Triple clamping through the naked fiber, tight buffer and cable, etc., can be used as patchcord
High on-line tensile strength of Optical Fast Connector after terminating, always keep connecting under the
force from cabling and drawing
Integrated protection of the casing to withstand harsh user environment
Directly connectable with ONU without any optical socket which reduces FTTH cost
High success rate and easiness in installation with average splicing time 100 sec
Lower requirement for the habit working and work environment call for to the builder
Visible Installation quality; independent from any far end light source and special device satisfying cabling
construction in any sectioned way.
Product Specifications Fast Termination Connector
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 3 of 5 NT-
TQ23
3_R
07/4
.0
H101710DF099
SC Series
N-FC-C2SCUA N-FC-C9SCUA
N-FC-C3SCUA N-FC-SFSCUA
FC Series
N-FC-C2FCUA N-FC-C9FCUA
N-FC-SFFCUA N-FC-C3FCUA
Product Specifications Fast Termination Connector
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 4 of 5 NT-
TQ23
3_R
07/4
.0
H101710DF099
Installation Tool
Figure -8 drop cable stripper P250 Coat Stripper
Clamp for N-FC-SFSCUA Clamp for RFT-SC
Clamp for N-FC-SFFCUA Clamp for RFT-FC
Product Specifications Fast Termination Connector
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 5 of 5 NT-
TQ23
3_R
07/4
.0
H101710DF099
Specification
Item Technical Parameters
Fiber mode Single-mode & Multi-mode
Operation time About 120s (no fiber cut)
Insert loss ≤ 0.3dB (1310nm & 1550nm)
Return loss ≤ -40dB
Fastening strength of naked fiber > 5 N
Fastening strength of naked fiber holder > 10 N
Tensile strength > 50 N
Operating temperature -40~+75℃
On-line tensile strength (20 N) △ IL ≤ 0.2dB △ RL ≤ 5dB
Mechanical durability (500 times) △ IL ≤ 0.2dB △ RL ≤ 5dB
Drop-off test (drop-off height 4m,
once per direction, totally 3 times)
△ IL ≤ 0.2dB △ RL ≤ 5dB
Ordering Information
Part Number Description
N-FC-C2SCUA Fast-Termination Connector, SC, for 250um buffered fiber
N-FC-C9SCUA Fast-Termination Connector, SC, for 900um buffered fiber
N-FC-SFSCUA Fast-Termination Connector, SC, for 3.1x2.0mm figure-8 drop cable
N-FC-C3SCUA Fast-Termination Connector, SC, for 3.0mm/2.0mm drop cable
N-FC-C2FCUA Fast-Termination Connector, FC, for 250um fiber
N-FC-C9FCUA Fast-Termination Connector, FC, for 900um fiber
N-FC-SFFCUA Fast-Termination Connector, FC, for 3.1x2.0mm figure-8 drop cable
N-FC-C3FCUA Fast-Termination Connector, FC, for 3.0mm/2.0mm drop cable
Product Specifications Fiber Optic Adapter/Coupler
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 1 of 4 NT-
TQ23
3_R
07/4
.0
H101710DF043
FC Adapter
Features
Comply with IEC 61754-13
Adapter housing material:
Nickel-plated metal
Adapter C-sleeve material:
Ceramic
Installation:
Square or D-D mounting flange
Key dimension:
Wide-key (2.15mm) or narrow-key (2.05mm)
Performance
Insertion Loss:
<= 0.2dB against reference connectors
Operating Temperature:
-40℃ ~ +70℃
Square Flange
Round Flange
Hexagonal Flange
Product Specifications Fiber Optic Adapter/Coupler
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 2 of 4 NT-
TQ23
3_R
07/4
.0
H101710DF043
Ordering Information
Part Number Description
N-98E-14 FC/PC simplex adapter, D-D style, round flange
N-98E-15 FC/PC simplex adapter, square flange
N-98E-39 FC/APC simplex adapter, narrow key 2.03~2.08mm
N-98E-53 FC/PC simplex adapter, D-D style, 6-sides
Square Flange
Round Flange
Hexagonal Flange
Product Specifications Fiber Optic Adapter/Coupler
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 3 of 4 NT-
TQ23
3_R
07/4
.0
H101710DF043
SC Adapter
Features
Comply with IEC 61754-4, 60874-14
Adapter variants:
simplex and duplex
Adapter housing material: Composite plastic or
nickel-plated metal
Adapter C-sleeve material: Ceramic
Color rule for composite plastic adapter: blue - SM,
beige – MM, green – SM APC
Installation: with or without mounting flange
Performance
Insertion Loss: <= 0.2dB against reference connectors
Operating Temperature: -40℃ ~ +70℃
Ordering Information
Part Number Description Part Number Description
N-98E-08 SC/PC MM simplex adapter, beige 98E-36 SC SM/MM duplex adapter, metal house
N-98E-09 SC/PC MM simplex adapter, blue 98E-40 SC/APC simplex adapter, green
N-98E-10 SC/PC MM duplex adapter, beige 98E-46 SC/PC,SM duplex adapter without flange
N-98E-11 SC/PC SM duplex adapter, blue 98E-47 SC/PC,MM duplex adapter without flange
N-98E-23 SC/PC SM simplex adapter, round flange 98E-65 SC/PC simplex adapter, metal housing
Product Specifications Fiber Optic Adapter/Coupler
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 4 of 4 NT-
TQ23
3_R
07/4
.0
H101710DF043
LC Adapter Features
Comply with IEC 61754-20,GR-326-CORE,
Adapter variants: simplex and duplex and quad
Adapter housing material: Composite plastic or nickel-plated metal
Adapter C-sleeve material: Ceramic
Color rule for composite plastic adapter: blue - SM, beige – MM,
Green – SM APC
Installation: With or without mounting flange
Performance
Insertion Loss: <= 0.2dB against reference connectors
Operating Temperature: -40℃ ~ +75℃
Ordering Information
Part Number Description Part Number Description
N-98E-01 LC/PC MM duplex adapter, beige 98E-48 LC/PC,SM simplex adapter, blue
N-98E-02 LC/PC SM duplex adapter, blue 98E-49 LC/PC,MM simplex adapter, beige
N-98E-32 LC MM duplex adapter, snap-latch fixing 98E-50 LC/PC,SM duplex adapter, hole fixing
N-98E-31 LC SM duplex adapter, snap-latch fixing 98E-66 LC, MM, Quad adapter
Product Specifications Fiber Optic Patchcord & Pigtail
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 1 of 4 H101710DF031N
T-TQ
233_
R07
/4.0
Features
Available for all common types of connectivity systems
Cable options:
0.9mm buffered fiber
1.6-2.0mm simplex/duplex cable
2.9mm simplex/duplex cable
Other cable adoptions upon request
Connector options: Simplex and duplex
Fiber options:
Single-mode 9/125um, multi-mode 50/125um, 62.5/125um
and OM3/OM4 (LOF 50/125um)
LC comply with IEC 61754-20
SC comply with TIA/EIA 568, IEC 874-10
FC comply with IEC 60874-7
ST comply with TIA/EIA 568, IEC 874-14
MU comply with IEC 61754-6
MTRJ comply with TIA/EIA-604-12 and IEC61754-18
DIN comply with IEC 61754-3
ESCON is a registered trademark of IBM
Insertion loss test acc. to IEC 61300-3-4
Return loss test acc. to IEC 61300-3-6
Operation temperature: -20℃ ~ +70℃
Single-Mode Connector Endface IL Typical IL Maximum RL Typical RL Maximum
SC/FC/ST/LC/MU/DIN Ultra (UPC) 0.25 dB 0.40 dB -55 dB -45dB
Angle (APC) 0.25 dB 0.40 dB -65 dB -60dB
MTRJ Ultra (UPC) 0.35 dB 0.60 dB -35dB
MTP Angle (APC) 0.25 dB 0.60 dB -55dB -55dB
Multi-Mode Connector Endface
SC/FC/ST/LC/MU/DIN Ultra (UPC) 0.25 dB 0.40 dB
MTRJ Ultra (UPC) 0.35 dB 0.60 dB
MTP Super (SPC) 0.25 dB 0.45 dB
Product Specifications Fiber Optic Patchcord & Pigtail
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 2 of 4 H101710DF031N
T-TQ
233_
R07
/4.0
Delivery Form Single item in foil bag
One product ID label with measurement values per patchcord
Serial number label on patchcord
Ordering Information Netop fiber optic patchcords and pigtails are ordered with part number “N-98C” by following additional eight characters as defined by digit 1 through digit 8: Digit 1 - Fiber cable type, Digit 2 - Cable diameter, Digit 3 – Cable structure, Digit 4 - Polished connector endface for SM or core diameter for MM, Digit 5 & Digit 6 - Connector type, Digit 7 - Unit of Measurement and Digit 8 - Cable assembly length. Single-mode Patch cord or Pigtail N-98C X X X X X X X XXXX Digit1 Digit2 Digit3 Digit4 Digit5 Digit6 Digit7 Digit8
X X X X X X X XXXX
S: SM Riser 2: 2mm 0: pigtail 1: UPC-UPC 1: ST 1: ST
E: SM LSZH 3: 3mm 1: patchcord 2: Null 2: SC 2: SC M : meter
Cable length
XXX.X meter
I: SM Plenum 6: 1.6mm 2: Duplex pigtail 3: APC-APC 3: FC 3: FC
8: 1.8mm 3: Duplex patchcord 4: PC-APC 4: LC 4: LC F: feet
Cable length
XXX.X feet P: SM G655
(Riser) 9: 0.9mm 5: APC-PC 5: MU 5: MU
Z: SM G657A
(LSZH)
4: Duplex pigtail
(separately) 6: MT-RJ(F) 6: MT-RJ(F)
7: MT-RJ(M) 7: MT-RJ(M)
5: Duplex patchcord
(separately) 8: MTP(F) 8: MTP(F)
9: E2000 9: E2000
A: FSMA A: FSMA
B: MTP(M) B: MTP(M)
C: ESCON C: ESCON
D: SCDC D: SCDC
N-98C
E: DIN E: DIN
Product Specifications Fiber Optic Patchcord & Pigtail
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 3 of 4 H101710DF031N
T-TQ
233_
R07
/4.0
Multi-mode Patch cord or Pigtail N-98C X X X X X X X XXXX Digit1 Digit2 Digit3 Digit4 Digit5 Digit6 Digit7 Digit8
X X X X X X X XXXX
M: MM Riser 2: 2mm 0: pigtail 5: 50/125 1: ST 1: ST
F: MM LSZH 3: 3mm 1: patchcord 6: 62.5/125 2: SC 2: SC M: meter
Cable length
XXX.X meter
J: MM Plenum 6: 1.6mm 2: Duplex pigtail 7: 100/140 3: FC 3: FC
8: 1.8mm 3: Duplex patchcord 4: LC 4: LC F: feet
Cable length
XXX.X feet G: 10G Riser
(LT=300m) 9: 0.9mm 5: MU 5: MU
4: Duplex pigtail
(separately) 6: MT-RJ(F) 6: MT-RJ(F)
H: 10G LSZH
(LT=300m) 7: MT-RJ(M) 7: MT-RJ(M)
5: Duplex patchcord
(separately) 8: MTP(F) 8: MTP(F) N: 10G Plenum
(LT=300m) 9: E2000 9: E2000
A: FSMA A: FSMA Q: 10G Riser
(LT=150m) B: MTP(M) B: MTP(M)
C: ESCON C: ESCON R: 10G LSZH
(LT=150m) D: SCDC D: SCDC
N-98C
T: 10G Plenum
(LT=150m)
E: DIN E: DIN
Single-mode Patch cord or Pigtail (Multi-fiber) N-98C X X X X X X X XXXX Digit1 Digit2 Digit3 Digit4 Digit5 Digit6 Digit7 Digit8
X X X X X X X XXXX
A: SM ribbon A: 2 core 0: pigtail 1: UPC-UPC 1: ST 1: ST
C:SM breakout B: 4 core 1: patchcord 2: Null 2: SC 2: SC M: meter
Cable length
XXX.X meter
C: 6 core 2: Duplex pigtail 3: APC-APC 3: FC 3: FC
D: 8 core 3: Duplex patchcord 4: PC-APC 4: LC 4: LC F: feet
Cable length
XXX.X feet
E: 12 core 5: APC-PC 5: MU 5: MU
F: 24 core
4: Duplex pigtail
(separately) 6: MT-RJ(F) 6: MT-RJ(F)
G:36 core 7: MT-RJ(M) 7: MT-RJ(M)
H:48 core
5: Duplex patchcord
(separately) 8: MTP(F) 8: MTP(F)
9: E2000 9: E2000
A: FSMA A: FSMA
B: MTP(M) B: MTP(M)
C: ESCON C: ESCON
D: SCDC D: SCDC
N-98C
E: DIN E: DIN
Product Specifications Fiber Optic Patchcord & Pigtail
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 4 of 4 H101710DF031N
T-TQ
233_
R07
/4.0
Multi-mode Patch cord or Pigtail (Multi-fiber) N-98C X X X X X X X XXXX Digit1 Digit2 Digit3 Digit4 Digit5 Digit6 Digit7 Digit8
X X X X X X X XXXX
B: MM ribbon A: 2 core 0: pigtail 5: 50/125 1: ST 1: ST
D:MM breakout B: 4 core 1: patchcord 6: 62.5/125 2: SC 2: SC M: meter
Cable length
XXX.X meter
C: 6 core 2: Duplex pigtail 7: 100/140 3: FC 3: FC
D: 8 core 3: Duplex patchcord 4: LC 4: LC F: feet
Cable length
XXX.X feet
E: 12 core 5: MU 5: MU
F: 24 core
4: Duplex pigtail
(separately) 6: MT-RJ(F) 6: MT-RJ(F)
G:36 core 7: MT-RJ(M) 7: MT-RJ(M)
H:48 core
5: Duplex patchcord
(separately) 8: MTP(F) 8: MTP(F)
9: E2000 9: E2000
A: FSMA A: FSMA
B: MTP(M) B: MTP(M)
C: ESCON C: ESCON
D: SCDC D: SCDC
N-98C
E: DIN E: DIN
Product Specifications Fixed Fiber Optic Attenuator
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 1 of 2 H101710DF044
Properties
Stable attenuation
High return loss
Environmentally stable
Easy installation
Customer designed attenuation specifications
All fiber construction
Build-out and in-line type available
Low attenuation tolerance
Low wavelength dependency
Performance
Plug type Attenuator Male/Female Type
Return loss: UPC>55dB, APC>65dB
Attenuation Tolerance: ±0.45dB(<5dB) / ±9%(≥5dB)
Operating Wavelength: Dual-window 1310/1550±25nm
Connector type: FC, SC, ST, MU, LC
In-line Attenuator (Attenuated Patch Cord) Fiber Type: Single Mode
Attenuation: 5~20 dB
Bandwidth: ±40nm(at 1310nm and 1550nm window)
Attenuation tolerance (without connectors):
±0.5dB(5-10dB) at 1310nm and 1550nm window
±0.8dB(11-20dB) at 1310nm and 1550nm window
Connector loss: 0.20dB typical
Return loss (without connectors): ≥50dB
Connector Type: FC, SC, ST, LC, MU
Cable type: 250um, 900um, 2.0mm, 3.0mm PVC or LSZH
Cable Length: Customer specified
Metal tube dimension: Diameter≤4mm, Length≤80mm.
Product Specifications Fixed Fiber Optic Attenuator
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 2 of 2 H101710DF044
Ordering Information
X X X X XXX - XXX
Part Type Cable type Wavelength Connector Cable Length Attenuation
0= Plug type
0=
Build-out-attenuator
0=
Build-out-attenuator 1=SC/UPC XX.X Meter 001=1 dB
1= In-line type 1=250um SM 1=850nm 2=FC/UPC 002=2 dB
2=900um SM 2=1310nm 3=ST/UPC 003=3 dB
3=2.0mm SM 3=1550nm 4=FC/APC 004=4 dB
4=3.0mm SM 4=1310/1550nm 5=SC/APC 005=5 dB
5=250um 50u 6=D4/UPC 006=6 dB
6=900um 50u 7=LC/APC 007=7 dB
7=2.0mm 50u 8=LC/UPC 008=8 dB
8=3.0mm 50u 9=MU/UPC 009=9 dB
9=250um 62.5u 010=10 dB
A=900um 62.5u ……
B=2.0mm 62.5u
N-98D
C=3.0mm 62.5u 015= 15 dB
Eg: N-98D0001-001 is the Order Number for 1dB SC/UPC Build-out-attenuator
Product Specifications N-10xabc-1A Fiber Distribution Panel
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 1 of 3 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H101310JS021NT-
TQ23
3_R
07/4
.0
Features
Suitable for all common types of factory or
on-site assembled OF cables with excellent
performance and easy installation
Compatible with all factory assembled
PREConnect® cabling system
High reliability
High flexibility
High integrated design
Applications
ISO / IEC 8802-3: FOIRL
ISO / IEC 8802-3: 10BASE-FL, FP & FB
ISO / IEC TR 11802-4: 4 & 16 Mbit/s Token Ring
ISO / IEC 8802-5t: 100 Mbit/s Token Ring
ISO / IEC 8802-12: Demand Priority
ATM at 52Mbit/s
ATM at 155Mbit/s
ATM at 622Mbit/s
DIS 14165-111: Fibre Channel (FC-PH) at 133 Mbit/s
DIS 14165-111: Fibre Channel (FC-PH) at 266 Mbit/s
DIS 14165-111: Fibre Channel (FC-PH) at 531 Mbit/s
DIS 14165-111: Fibre Channel (FC-PH) at 1062 Mbit/s
ISO / IEC 8802-3: 1000BASE-SX
ISO / IEC 8802-3: 1000BASE-LX
ISO / IEC 9314-9: FDDI LCF-PMD
ISO / IEC 9314-4: FDDI SMF-PMD
EN ISO / IEC 9314-3: FDDI PMD
ISO / IEC 8802-3: 100BASE-FX
IEEE 802.3: 10GBASE-LX4
IEEE 802.3: 10GBASE-ER/EW
IEEE 802.3: 10GBASE-SR/SW
IEEE 802.3: 10GBASE-LR/LW
Product Specifications N-10xabc-1A Fiber Distribution Panel
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 2 of 3 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H101310JS021NT-
TQ23
3_R
07/4
.0
Specifications
Dimensions:
1HU Fixed Distribution Panel 483 x 250 x 1HU
2HU Fixed Distribution Panel 483 x 250 x 2HU
1HU Telescopic Distribution Panel 483 x 300 x 1HU
2HU Telescopic Distribution Panel 483 x 300 x 2HU
Twist and pull secure cable supports for PREConnect® trunk cable dividers
2 PG21 (29mm) cable inputs
Cable guidance 45°slant backwards and lead-way choice
4 cable clamping slot cap and divider slot cap
2 universal supports for simplex, duplex and break-out-cables mountable
Mountable Screen print front plate labeling:
1 to 4 or 1 to 12 or 1 to 16 or 1 to 24 or 1 to 32 or 1 to 48 for 1HU
1 to 24 or 1 to 32 or 1 to 36 or 1 to 48 or 1 to 64 for 2HU Outline Drawing
Fixed Distribution Panel Telescopic Distribution Panel
Product Specifications N-10xabc-1A Fiber Distribution Panel
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 3 of 3 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H101310JS021NT-
TQ23
3_R
07/4
.0
Ordering Information Fixed Distribution Panel
N-101165-1A 1 HU Fixed Distribution Panel, SC/SC simplex SM, 8 Fibers, Black
N-101125-1A 1 HU Fixed Distribution Panel, SC/SC simplex SM, 12 Fibers, Black
N-101135-1A 1 HU Fixed Distribution Panel, SC/SC simplex SM, 24 Fibers, Black
N-105145-1A 2 HU Fixed Distribution Panel, SC/SC simplex SM, 48 Fibers, Black
N-105175-1A 2 HU Fixed Distribution Panel, SC/SC simplex SM, 32 Fibers, Black
Telescopic Distribution Panel
N-103165-1A 1 HU Telescopic Distribution Panel, SC/SC simplex SM, 8 Fibers, Black
N-103125-1A 1 HU Telescopic Distribution Panel, SC/SC simplex SM, 12 Fibers, Black
N-103135-1A 1 HU Telescopic Distribution Panel, SC/SC simplex SM, 24 Fibers, Black
N-103G65-1A 1 HU Telescopic Distribution Panel, SC/SC/APC simplex SM, 8 Fibers, Black
N-103G25-1A 1 HU Telescopic Distribution Panel, SC/SC/APC simplex SM, 12 Fibers, Black
N-103G35-1A 1 HU Telescopic Distribution Panel, SC/SC/APC simplex SM, 24 Fibers, Black
N-107G75-1A 2 HU Telescopic Distribution Panel, SC/SC/APC simplex SM, 32 Fibers, Black
N-107G45-1A 1 HU Telescopic Distribution Panel, SC/SC/APC simplex SM, 48 Fibers, Black Part Number Options: N-10xabc-1A x-Height 1 - 1HU Fixed, 3 - 1HU Telescopic, 5 - 2HU Fixed, 7 - 2HU Telescopic
a-Adaptor
1: SC/SC Simplex SM, 2: ST/ST Simplex SM, 3: ST/ST Duplex SM, 4: SC/SC Simplex MM,
5: SC/SC Duplex SM, 6: SC/SC Duplex MM, 7: SC/ST Duplex SM, 8: SC/ST Duplex MM,
9: ESCON/ST MM, A: MT-RJ/MT-RJ SM, B: MT-RJ/MT-RJ MM, C: LC/LC Duplex SM,
D: LC/LC Duplex MM, E: FC/FC Simplex, G: SC/APC Simplex, H: DIN/DIN, K: E2000/APC
b-Fibers
1: 0 Fiber, 2: 12 Fibers, 3: 24 Fibers, 4: 48 Fibers, 5: 16 Fibers, 6: 8 Fibers, 7: 32 Fibers, 8: 4 Fibers,
9: 256 Fibers, A: 288 Fibers, B: 512 Fibers, C: 6 Fibers, D: 36 Fibers, E: 72 Fibers, F: 96 Fibers
c-Color 5: Black
1A-Meterial Steel body & front plate structure
Product Specifications N-10xabc-1A Fiber Splice Panel
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 1 of 3 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H101310JS022NT-
TQ23
3_R
07/4
.0
Features
Suit for all common types of factory or on-site assembled OF
cables with excellent performance and easy installation
High reliability
High flexibility
High integrated design
Applications
ISO / IEC 8802-3:FOIRL
ISO / IEC 8802-3:10BASE-FL, FP & FB
ISO / IEC TR 11802-4: 4 & 16 Mbit/s Token Ring
ISO / IEC 8802-5t: 100 Mbit/s Token Ring
ISO / IEC 8802-12: Demand Priority
ATM at 52Mbit/s
ATM at 155Mbit/s
ATM at 622Mbit/s
DIS 14165-111:Fibre Channel (FC-PH) at 133 Mbit/s
DIS 14165-111:Fibre Channel (FC-PH) at 266 Mbit/s
DIS 14165-111:Fibre Channel (FC-PH) at 531 Mbit/s
DIS 14165-111:Fibre Channel (FC-PH) at 1062 Mbit/s
ISO / IEC 8802-3:1000BASE-SX
ISO / IEC 8802-3: 1000BASE-LX
ISO / IEC 9314-9:FDDI LCF-PMD
ISO / IEC 9314-4:FDDI SMF-PMD
EN ISO / IEC 9314-3: FDDI PMD
ISO / IEC 8802-3: 100BASE-FX
IEEE 802.3: 10GBASE-LX4
IEEE 802.3: 10GBASE-ER/EW
IEEE 802.3: 10GBASE-SR/SW
IEEE 802.3: 10GBASE-LR/LW
Specifications
Dimensions:
1HU Fixed Splice Panel 483 x 250 x 1HU
2HU Fixed Splice Panel 483 x 250 x 2HU
1HU Telescopic Splice Panel 483 x 300 x 1HU
2HU Telescopic Splice Panel 483 x 300 x 2HU
Twist secure supports for max. 2 splice cassettes (1HU)
Twist secure supports for max. 4 splice cassettes (2HU)
4 cable clamping slot cap and divider slot cap
2 PG21 (29mm) cable inputs
Cable guidance 45°slant backwards and lead-way choice
2 universal supports for simplex, duplex and break-out-cables
Mountable Screen print front plate labeling:
1 to 4 or 1 to 12 or 1 to 16 or 1 to 24 or 1 to 32 or 1 to 48 for 1HU
1 to 24 or 1 to 32 or 1 to 36 or 1 to 48 or 1 to 64 for 2HU,
Product Specifications N-10xabc-1A Fiber Splice Panel
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 2 of 3 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H101310JS022NT-
TQ23
3_R
07/4
.0
Outline Drawing
Fixed Splice Panel Telescopic Splice Panel
Product Specifications N-10xabc-1A Fiber Splice Panel
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 3 of 3 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H101310JS022NT-
TQ23
3_R
07/4
.0
Ordering Information Fixed Splice Panel
N-102165-1A 1 HU Fixed Splice Panel, SC/SC simplex SM, 8 Fibers, Black
N-102125-1A 1 HU Fixed Splice Panel, SC/SC simplex SM, 12 Fibers, Black
N-102135-1A 1 HU Fixed Splice Panel, SC/SC simplex SM, 24 Fibers, Black
N-106175-1A 2 HU Fixed Splice Panel, SC/SC simplex SM, 32 Fibers, Black
N-106145-1A 2 HU Fixed Splice Panel, SC/SC simplex SM, 48 Fibers, Black
Telescopic Splice Panel
N-104165-1A 1 HU Telescopic Splice Panel, SC/SC simplex SM, 8 Fibers, Black
N-104125-1A 1 HU Telescopic Splice Panel, SC/SC simplex SM, 12 Fibers, Black
N-104135-1A 1 HU Telescopic Splice Panel, SC/SC simplex SM, 24 Fibers, Black
N-104G65-1A 1 HU Telescopic Splice Panel, SC/SC/APC simplex SM, 8 Fibers, Black
N-104G25-1A 1 HU Telescopic Splice Panel, SC/SC/APC simplex SM, 12 Fibers, Black
N-104G35-1A 1 HU Telescopic Splice Panel, SC/SC/APC simplex SM, 24 Fibers, Black
N-108G75-1A 2 HU Telescopic Splice Panel, SC/SC/APC simplex SM, 32 Fibers, Black
N-108G45-1A 1 HU Telescopic Splice Panel, SC/SC/APC simplex SM, 48 Fibers, Black Part Number: N-10xabc-1A
x-Height 2: 1HU Fixed, 4: 1HU Telescopic, 6: 2 HU Fixed, 8: 2HU Telescopic, A: 3 HU Fixed, H: 4HU Fixed
a-Adaptor
1: SC/SC Simplex SM, 2: ST/ST Simplex SM, 3: ST/ST Duplex SM, 4: SC/SC Simplex MM,
5: SC/SC Duplex SM, 6: SC/SC Duplex MM, 7: SC/ST Duplex SM, 8: SC/ST Duplex MM,
9: ESCON/ST MM, A: MT-RJ/MT-RJ SM, B: MT-RJ/MT-RJ MM, C: LC/LC Duplex SM,
D: LC/LC Duplex MM, E FC/FC Simplex, F: Blank, G: SC/APC Simplex, H: DIN/DIN, K: E2000/APC
b-Fibers
1: 0 Fiber, 2: 12 Fibers, 3: 24 Fibers, 4: 48 Fibers, 5: 16 Fibers, 6: 8 Fibers, 7: 32 Fibers, 8: 4 Fibers,
9: 256 Fibers, A: 288 Fibers, B: 512 Fibers, C: 6 Fibers, D: 36 Fibers, E: 72 Fibers, F: 96 Fibers
c-Color 5: Black
1A-Meterial 1A: Steel body & front plate
Product Specifications Ultra-Flexible Fiber Patch Cord
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 1 of 2
NT-
TQ23
3_R
07/4
.0
H101310DF110
Overview
Netop ultra-flexible fiber patch cord features small bending radius and super flexible and durable cables, which is specifically
suitable for FTTH applications.
Cable Sstructure
Mechanical and Transmission Data
Product Specifications Ultra-Flexible Fiber Patch Cord
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 2 of 2
NT-
TQ23
3_R
07/4
.0
H101310DF110
Connector Performance
LC comply with IEC 61754-20
SC comply with TIA/EIA 568, IEC 874-10
Insertion loss tested acc. to IEC 61300-3-4
Return loss tested acc. to IEC 61300-3-6
Operation temperature: -25℃ ~ +70℃
Single Mode IL Typical IL Maximum RL Typical RL Maximum
SC, LC Ultra (UPC) < 0.20 dB 0.30 dB < -55 dB -45 dB
Angle (APC) < 0.20 dB 0.30 dB < -65 dB -60 dB
Delivery Form
Single item in foil bag
One product ID label with measurement values per patch cord
Serial number label on patch cord
Ordering Information
Netop ID Fiber Type Fiber Cable Diameter Product Type Interface A Interface B Units Length
N-SPC- X X X X X X XXX
A: G652D A: 2.0mm armorerd cable 1: pigtail 0: Null 0: Null M: meter XX.X
B: G657A B: 3.0mm armorerd cable 2: patchcord 1: SC/APC 1: SC/APC F: feet
C: G657B C: 4.0mm Ultru-flexible cable 2: SC/UPC 2: SC/UPC
D: figure-8 drop cable 3: LC/APC 3: LC/APC
E: figure-8 aerial drop cable 4: LC/UPC 4: LC/UPC
5: FC/APC 5: FC/APC
6: FC/UPC 6: FC/UPC
Netop Fttx-oDN techNologies
Design, manufacture and deploy worldwide RF and fiber optic total solutions • for telecommunication networksCreate value for our customers through innovative products, customized • services and cost effective solutionsHighest quality standards, state-of-the-art manufacturing facilities and reliable • supply chain management to achieve and exceed customer expectationsSocially responsible to our community and environment we do business in • and committed to employee's personnel development
Value Innovation•
Customer Focus•
Sustainable Growth•
Social Responsibility•
MISSION STATEMENT
CORE VALUE
NETOP COMPANY OVERVIEW
Netop is an international company devoted to providing the total "end-to-end" solution for enabling wireless coverage & optimizing telecommunication networks. We are a modern and dynamic company involved in both site and in-building wireless coverage business, as well as the fiber optic infrastructure business. Netop has capabilities in R&D, manufacturing, logistics and on-site services.
Netop provides both off-the-shelf and customized products for our customers.
Our major offerings include:1) Total Site Solutions 2) In-building Wireless Coverage Solutions3) Customized Components for OEM Customers4) Microwave and Satellite Communication Systems5) Netop Cable Systems6) FTTx-ODN Technologies7) Telecom/OSP Fiber Solutions
Our technical competencies are protected with patents and our products adhere to the highest technical standards.
Netop production base is located in Qingpu Industrial Park, Shanghai. The factory has over 14,000 sqm production facilities with more than 800 employees.
To keep up with technological advancements, our R&D center in the United States is at the heart of technical innovations. We strive to be at the forefront of technology.
Netop also has an expansive sales and marketing network throughout the world. We have over 20 subsidiaries covering Asia Pacific, the Middle East, Africa, Europe and the Americas. Hence, we are able to be in constant contact with our local customers providing them with timely and quality services.
CONTENT
Netop eNd-to-eNd Fttx-odN SolutioN 6
CeNtral oFFiCe SyStem 8Optical Distribution Frame 9
Fiber Splicing and Distribution Patch Panel 13
Feeder CaBle SyStem 16Feeder Cable 17
Fiber Joint Enclosure 24
Fiber Joint Enclosure for Splitter 28
Optical Cable Cross Connecting Cabinet 32
FiBer diStriButioN SyStem 36Splitter Distribution Cabinet 37
Distribution Cable 41
drop CaBle SyStem 46Optical Fiber Distribution Unit 47
Drop Cable for FTTH 51
FiBer termiNatioN SyStem 56Outdoor Optical Terminal Box 57
Fiber Faceplate Box 59
Field-installable Fiber Optic Connector 62
paSSiVe optiCal CompoNeNt 64Optical Splitter 65
Optical Fiber Patch Cord 68
Optical Fiber Adapter and Connector 71
NETOP ENd-TO-ENd FTTx-OdN SOLUTION
Along with the fast deployment of fiber-to-the-x technology and its application worldwide Netop Technology offers an end-to-end infrastructure solution for central office (CO), optical distribution network (ODN) and last-mile architecture. Netop’s broad selection of optical fiber products and end-to-end EPON, BPON and GPON solutions can be customized for your specific next-generation network requirements. Netop’s structural and modular products and configurations can not only meet your present demand, but also support your future life needs in a cost-effective way.
Optical Distribution Network (ODN) is a physical connectivity platform for next-generation broadband and gigabit access network. Netop Technology provides diversified products to build an ODN of high performance and reliability, as well as to provide service of network planning and consultation, and installation supports. Netop offers the highest quality products including Netop fiber optical cables, optical distribution frames (ODF), splitter distribution cabinets (SDC), passive splitters and fiber optic jumpers, specialized drop fiber cable and customer interface box.
End-to-end FTTx-ODN Solutions
End-to-end FTTx-ODN Solutions
The System of Central Office Includes the Following Products:Optical Distribution Frame 9Fiber Splicing and Distribution Patch Panel 13
CENTRAL OFFICE SYSTEM
OPTICAL dISTRIbUTION FRAME
The optical distribution frame (ODF) is applied in the center office, optical cross connection point and network access point in fiber access network projects. It provides such functions as leading in, fixing and splicing, protecting optical cables, storing and managing pigtails, fixing and cross-connecting optical fibers, Meanwhile, enabling safe and reliable routing for connection, distribution and scheduling between optical systems in telecom networks.
Order Information
Netop id Frame type Frame Height Adapter Type Interface Port Count Pigtail LoadedX XX X X XXX X
N-ODF- A:A series 20:2000mm 0:Null 0: Null 000:Null 0: Without pigtail
B:B series 22:2200mm 1:SC 1: UPC 1: With 0.9mm pigtail
C:C series 26:2600mm 2:FC 2: APC
D:CⅡ series 3:LC
E:Open frame
Product Overview1
10
Net
op F
TTx-
OD
N T
echn
olog
ies
Optical Distribution Frame A
FeatureSuit for connect outside optical cables with optical transmission equipment• Convenient operation, double side operating• Ability to reconfigure and expand your network• Various interface available SC, FC or LC•
Structural Drawing
SpecificationHigh termination density, maximum 792 fibers• Superior cable management ensure 40mm minimum bend radius• Connector life>1000 times• Connector loss (including Insertion, Change ability and Durability) ≤0.5dB• Change ability≤0.2dB• Durability≤0.1dB• Return loss: PC≥40dB, UPC≥50dB, APC≥60dB• Insulation resistance (between frame and protection • grounding)>1000MΩ/500V (DC)Dielectric strength (between frame and protection grounding)>3000V (DC) /• min, no spark-over and no flashoverOperation temperature: -5• ℃~+40℃
Relative humidity: 85% (+30• ℃)Atmosphere pressure: 70kPa~106kPa•
item type Size mm Capacity fiber
1 N-ODF-A26XXXX 2600×860×300 ≤792
2 N-ODF-A22XXXX 2200×860×300 ≤648
3 N-ODF-A20XXXX 2000×860×300 ≤576
11
Netop FTTx-O
DN
Technologies
Optical Distribution Frame B
FeatureSuit for central offices and cross connection points in the OAN• Convenient operation, double side operating• Ability to reconfigure and expand your network• Various interface available SC, FC or LC•
SpecificationHigh termination density, maximum 936 fibers• Superior cable management ensure 40mm minimum bend radius• Connector life>1000 times• Connector loss (including Insertion, Change ability and Durability) ≤0.5dB• Change ability≤0.2dB• Durability≤0.1dB• Return loss: PC≥40dB, UPC≥50dB, APC≥60dB• Insulation resistance (between frame and protection • grounding)>1000MΩ/500V (DC)Dielectric strength (between frame and protection grounding)>3000V (DC) /• min, no spark-over and no flashoverOperation temperature: -5• ℃~+40℃
Relative humidity: 85% (+30• ℃)Atmosphere pressure: 70kPa~106kPa•
item type Size mm Capacity fiber
1 N-ODF-B26XXXX 2600×800×300 ≤936
2 N-ODF-B22XXXX 2200×800×300 ≤792
3 N-ODF-B20XXXX 2000×800×300 ≤660
12
Net
op F
TTx-
OD
N T
echn
olog
ies
Optical Distribution Frame C
FeatureSuit for trunk transmission and cross connection points of • lower capacity all front accessConvenient operation, double side operating• Ability to reconfigure and expand your network• Various interface available SC, FC or LC•
SpecificationHigh termination density, maximum 384 fibers• Superior cable management ensure 40mm minimum bend • radiusConnector life>1000 times• Connector loss (including Insertion, Change ability and • Durability) ≤0.5dBChange ability≤0.2dB• Durability≤0.1dB• Return loss: PC≥40dB, UPC≥50dB, APC≥60dB• Insulation resistance (between frame and protection • grounding)>1000MΩ/500V (DC)Dielectric strength (between frame and protection • grounding)>3000V (DC) /min, no spark-over and no flashoverOperation temperature: -5• ℃~+40℃
Relative humidity: 85% (+30• ℃)Atmosphere pressure: 70kPa~106kPa•
item type Size mm Capacity fiber
1 N-ODF-C26XXXX 2600×600×300 ≤384
2 N-ODF-C22XXXX 2200×600×300 ≤288
3 N-ODF-C20XXXX 2000×600×300 ≤288
Optical Distribution Frame CⅡ
FeatureSuit for trunk transmission and cross connection points of • lower capacityConvenient operation, double side operating• Ability to reconfigure and expand your network• Various interface available SC, FC or LC•
SpecificationHigh termination density, maximum 192 fibers• Superior cable management ensure 40mm minimum bend • radiusConnector life>1000 times• Connector loss (including Insertion, Change ability and • Durability) ≤0.5dBChange ability≤0.2dB• Durability≤0.1dB• Return loss: PC≥40dB, UPC≥50dB, APC≥60dB• Insulation resistance (between frame and protection • grounding)>1000MΩ/500V (DC)Dielectric strength (between frame and protection • grounding)>3000V (DC) /min, no spark-over and no flashoverOperation temperature: -5• ℃~+40℃
Relative humidity: 85% (+30• ℃)Atmosphere pressure: 70kPa~106kPa•
item type Size mm Capacity fiber
1 N-ODF- CⅡ26XXXX 2600×240×300 ≤192
2 N-ODF- CⅡ22XXXX 2200×240×300 ≤144
3 N-ODF- CⅡ20XXXX 2000×240×300 ≤144
FIbER SPLICING ANd dISTRIbUTION PATCH PANEL
Fiber splicing and distribution patch panel supports the splicing connection, termination and storage of fiber optic cables. Netop supplies various patch panel in both telescopic-type and fixed-type structure by the same time providing all industry-standard coupler interface including SC, FC, ST, LC, MU, MT-RJ, E2000, DIN and etc. The Netop fiber optic patch panel can be integrated into the EIA 19” rack or multi-media cabinet.
Product Overview2
Netop id X-Height and Type Adapter Type Fiber Count panel Color Structure CodeN-10 X X X X X
1: 1HU fixed distribution panel 1: SC/SC simplex SM 1: 0 fiber 0: Metal 1A: Steel body & front
2: 1HU fixed splice panel 2: ST/ST simplex SM 2: 12 fibers 2: Grey
3: 1HU telescopic distribution panel 3: ST/ST duplex SM 3: 24 fibers 3: White
4: 1HU telescopic splice panel 4: SC/SC simplex MM 4: 48 fibers 4: Beige
5: 2HU fixed distribution panel 5: SC/SC duplex SM 6: 8 fibers 5: Black
6: 2HU fixed splice panel 6: SC/SC duplex MM 7: 32 fibers
7: 2HU telescopic distribution panel 7: SC/ST duplex SM 8: 4 fibers
8: 2HU telescopic splice panel 8: SC/ST duplex MM 9: 256 fibers
A: 3HU telescopic splice panel 9: ESCON/ST MM A: 288 fibers
B: 3HU modular splice panel A: MT-RJ/MT-RJ SM B: 512 fibers
C: 1HU modular distribution panel B: MT-RJ/MT-RJ MM, C: 6 fibers
D: 1HU modular splice panel C: LC/LC duplex SM D: 36 fibers
E: 1HU modular splice panel w/label D: LC/LC duplex MM E: 72 fibers
F: 2HU modular splice panel w/label E: FC/FC simplex F: 96 fibers
G: SC/APC simplex
H: DIN/DIN
K: E2000/APC
Order Information
14
Net
op F
TTx-
OD
N T
echn
olog
ies
SpecificationDimensions: •
1HU Fixed Splice panel 483 x 250 x 1HU
2HU Fixed Splice panel 483 x 250 x 2HU
1HU Telescopic Splice panel 483 x 300 x 1HU
2HU Telescopic Splice panel 483 x 300 x 2HU
Twist and pull secure cable supports for Pre-terminated trunk • cable dividers 2 PG21 (29mm) cable inputs• Cable guidance 45°slant backwards, lead-way choice• 4 cable clamping slot cap and divider slot cap• 2 universal supports for simplex, duplex and break-out-cables • Screen print front plate labeling•
ApplicationISO / IEC 8802-3: FOIRL• ISO / IEC 8802-3: 10BASE-FL, FP & FB• ISO / IEC TR 11802-4: 4 & 16 Mbit/s Token Ring• ISO / IEC 8802-5t: 100 Mbit/s Token Ring• ISO / IEC 8802-12: Demand Priority• ATM at 52Mbit/s• ATM at 155Mbit/s• ATM at 622Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 133 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 266 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 531 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 1062 Mbit/s• ISO / IEC 8802-3:1000BASE-SX• ISO / IEC 8802-3: 1000BASE-LX• ISO / IEC 9314-9: FDDI LCF-PMD• ISO / IEC 9314-4: FDDI SMF-PMD• EN ISO / IEC 9314-3: FDDI PMD• ISO / IEC 8802-3: 100BASE-FX• IEEE 802.3: 10GBASE-LX4 • IEEE 802.3: 10GBASE-ER/EW• IEEE 802.3: 10GBASE-SR/SW• IEEE 802.3: 10GBASE-LR/LW•
Fixed Distribution Panel
Telescopic Distribution Panel
Outline Drawing
FeatureCompatible with all factory assembled Pre-terminated cabling • systemHigh reliability• High flexibility• Maximally integrated designing•
Fiber Distribution Panel
15
Netop FTTx-O
DN
Technologies
FeatureSuit for all common types of factory or on-site assembled OF • cables with excellent performance and easy installation High reliability• High flexibility• Maximally integrated designing•
SpecificationDimensions: •
1HU Fixed Splice panel 483 x 250 x 1HU
2HU Fixed Splice panel 483 x 250 x 2HU
1HU Telescopic Splice panel 483 x 300 x 1HU
2HU Telescopic Splice panel 483 x 300 x 2HU
Twist secure supports for max. 2 splice cassettes (1HU)• Twist secure supports for max. 4 splice cassettes (2HU)• 4 cable clamping slot cap and divider slot cap• 2 PG21 (29mm) cable inputs• Cable guidance 45°slant backwards, lead-way choice• 2 universal supports for simplex, duplex and break-out-cables • Screen print front plate labeling•
ApplicationISO / IEC 8802-3: FOIRL• ISO / IEC 8802-3: 10BASE-FL, FP & FB• ISO / IEC TR 11802-4: 4 & 16 Mbit/s Token Ring• ISO / IEC 8802-5t: 100 Mbit/s Token Ring• ISO / IEC 8802-12: Demand Priority• ATM at 52Mbit/s• ATM at 155Mbit/s• ATM at 622Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 133 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 266 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 531 Mbit/s• DIS 14165-111: Fibre Channel (FC-PH) at 1062 Mbit/s• ISO / IEC 8802-3: 1000BASE-SX• ISO / IEC 8802-3: 1000BASE-LX• ISO / IEC 9314-9: FDDI LCF-PMD• ISO / IEC 9314-4: FDDI SMF-PMD• EN ISO / IEC 9314-3: FDDI PMD• ISO / IEC 8802-3: 100BASE-FX• IEEE 802.3: 10GBASE-LX4 • IEEE 802.3: 10GBASE-ER/EW• IEEE 802.3: 10GBASE-SR/SW• IEEE 802.3: 10GBASE-LR/LW•
Fixed Splice Panel
Telescopic Splice Panel
Outline Drawing
Fiber Splice Panel
The System of Feeder Cable Includes the Following Products:Feeder Cable 17Optical Fiber Joint Enclosure 24Fiber Joint Enclosure for Splitter 28Optical Cable Cross Connecting Cabinet 32
FEEdER CAbLE SYSTEM
1FEEdER CAbLE
Feeder fiber optical feeder cable is usually used to connect the optical distribution frame (ODF) in central office (CO) and the splitter distribution cabinet (SDC). The feeder cable can be direct burial, duct installable or aerial fiber optical cable according to different installation and environment conditions. Netop designs, manufactures and supplies all kinds of standard feeder fiber optic cables or per specific customer requirements.
Order Information
Product Overview
Netop id FO Cable Type Fiber Structure
typeSequence No.
Cable Structure Information
Fiber No. Fiber Type Extended Information
N- X X XXX Detail according to catalogue XXX XXXXX
Detail according to customer's request
F: Fiber 1: 250μm bunchy fiber 001 002: 2 cores 9OS1B: SM 9/125
A: Outdoor 2: Ribbon fiber 002 004: 4 cores 9OS2D: G.652D
U: Outdoor & Indoor 3: Buffered fiber 003 012: 12 cores 62OM1: MM62.5/125
I: Indoor 4: No fiber … 024: 24 cores 50OM2: MM50/125
S:Special 192: 192 cores …
…
Other see <Netop Cable Systems>
18
Net
op F
TTx-
OD
N T
echn
olog
ies
a-WSQ(ZN)(l)2yW2y
FeatureLight armored stranded gel-filled loose tube cable• With dual plastic steel tape• Comply with DIN VDE 0888-3 and IEC 60794-1• Application: • Duct or cable trays Aerial (Lashed) Direct buriedHigher mechanical properties and other options on request• LSZH jacket or dielectric strength member is available on request•
Armored Direct-burial Fiber Optical Cable
19
Netop FTTx-O
DN
Technologies
Fiber Count
Tube Count
Max. Fiber per Tube
Nominal Cable Diameter mm
Nominal Cable Weight Kg/Km
Tensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
2~36 6 6 14.0 210 1000/3000 1000/3000
38~72 6 12 15.7 250 1000/3000 1000/3000
74~96 8 12 17.4 290 1000/3000 1000/3000
98~120 10 12 19.0 345 1000/3000 1000/3000
122~144 12 12 20.0 420 1000/3000 1000/3000
Ordering Information
Loose Tube Standard loose tube size with color-coated fibers and gel-filled results in economical use and facilitates installation
Central Member Steel wire or FRP as the dielectric member for central strength element with no bonding
Cable Core Central member with loose tube SZ stranded and if necessary fillers isolates fibers from installation
Waterproof Element The filling compound around the cable core and if necessary water-swellable tape
Aluminum Tape Excellent humidity-resistant
Corrugated Steel Tape Provide rodent resistance for direct buried application
Ripcord Easily ripping the cable jacket and aluminum tape and steel tape
Cable Jacket Double PE jacket strengths the mechanical capability and excellent UV-resistance and provides superior protection against abrasion
Color of Jacket Black
Specification
1 product typeNA1005 = Product No.
2 Center Strength member0 = FRP Strength Member1 = Steel Wire Strength Member
3 Water-Swellable tape0 = No Water-Swellable Tape1 = Water-Swellable Tape
4 Jacket ColorBK = Black…See Netop Color Code on Page 6 of <Netop Cable Systems>
5 Jacket material01 = PE02 = LSZH
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count002 = 2 Cores…Others (004 to 144)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NA1005 - □ □ - □□ □□ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
20
Net
op F
TTx-
OD
N T
echn
olog
ies
a-WSQ(ZN)2y
FeatureNon-armored stranded gel-filled loose tube cable• Fig-8 type• With stranded steel wires as the self-support unit• Comply with IEC 60794-1• Application: • Aerial with self-supportHigher mechanical properties and other options on request • Dielectric strength member is available on request•
Figure-8 Type Aerial Fiber Optical Cable
21
Netop FTTx-O
DN
Technologies
Fiber Count
Tube Count
Max. Fiber per Tube
Nominal Cable Diameter mm
Nominal Cable Weight Kg/Km
Tensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
2~36 6 6.0 9.6*17.8 150 1000/3000 300/1000
38~60 12 6.0 10.2*18.2 157 1000/3000 300/1000
62~72 12 6.0 10.7*18.7 167 1000/3000 300/1000
74~96 12 6.0 12.0*20.0 198 1000/3000 300/1000
98~120 12 6.0 13.7*21.7 229 1000/3000 300/1000
122~144 12 6.0 15.1*23.1 269 1000/3000 300/1000
*Provide different size steel wires (1.0mm, 1.2mm, 1.6mm) according to client different mechanical request.
Loose Tube Standard loose tube size with color-coated fibers and gel-filled results in economical use and facilitates installation
Central Member Steel wire or FRP as the dielectric member for central strength element with no bonding
Cable Core Central member with loose tube SZ stranded and if necessary fillers isolates fibers from installation
Waterproof Element The filling compound around the cable core and if necessary water-swellable tape
Self-Support Unit Stranded steel wires with different size
Ripcord Easily ripping the cable jacket
Cable Jacket PE jacket and excellent UV-resistance and provides superior protection against abrasion
Color of Jacket Black
Specification
Ordering Information
1 product typeNA1011 = Product No.
2 Center Strength member0 = FRP Strength Member1 = Steel Wire Strength Member
3 Water-Swellable tape0 = No Water-Swellable Tape1 = Water-Swellable Tape
4 Jacket ColorBK = Black…See Netop Color Code on Page 6 of <Netop Cable Systems>
5 Jacket material01 = PE02 = LSZH
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count002 = 2 Cores…Others (004 to 144)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NA1011 - □ □ - □□ □□ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
22
Net
op F
TTx-
OD
N T
echn
olog
ies
a-WQ(ZN)2y
FeatureNon-armored stranded gel-filled loose tube cable• Ribbon fiber cable• Comply with IEC 60794-1• Application: • Duct or cable Trays Aerial (Lashed)Ribbons are individually numbered for easy identification• Higher mechanical properties and other options on request• LSZH jacket or dielectric strength member is available on request• Can provide ribbon with 4 or 8 fibers structure cable•
Ribbon Fiber Cable
23
Netop FTTx-O
DN
Technologies
Loose Tube Standard loose tube size with color-coated ribbon fibers and gel-filled results in economical use and facilitates installation
Central Member Steel wire or FRP as the dielectric member for central strength element with no bonding
Cable Core Central member with loose tube SZ stranded and if necessary fillers isolates fibers from installation
Waterproof Element The filling compound around the cable core and if necessary water-swellable tape
Ripcord Easily ripping the cable jacket
Cable Jacket PE jacket and excellent UV-resistance and provides superior protection against abrasion
Color of Jacket Black
Specification
Fiber Count
Tube Count
Fiber Count per Tube
Nominal Cable Diameter mm
Nominal Cable Weight Kg/Km
Tensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
2~36 6 6 10.8 91 600/1500 300/1000
38~72 6 12 12.6 114 600/1500 300/1000
74~96 8 12 13.2 132 1000/3000 300/1000
98~120 10 12 15.6 170 1000/3000 300/1000
122~144 12 12 17.5 185 1000/3000 300/1000
146~192 16 12 17.8 200 1000/3000 300/1000
194~216 18 12 18.1 225 1000/3000 300/1000
218~240 20 12 19.5 253 1000/3000 300/1000
242~288 24 12 22.2 302 1000/3000 300/1000
Ordering Information
1 product typeNA1001 = Product No.
2 Center Strength member0 = FRP Strength Member
3 Water-Swellable tape0 = No Water-Swellable Tape1 = Water-Swellable Tape
4 Jacket ColorBK = Black…See Netop Color Code on Page 6 of <Netop Cable Systems>
5 Jacket material01 = PE02 = LSZH
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count002 = 2 Cores…Others (004 to 288)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NA1001 - 0 □ - □□ □□ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
2Order Information
Netop id Shape Sealing Structure of Box Cable Type entry type Max. Inlet Cable Port Max. Outlet Cable Port Max Tray Capacity Splicing Tray Count Splicing Tray TypeN-98G X X X X X(<10) X(<10) X X XX
1: Horizontal 1: Sticky cincture 1: Bunchy 0: Standard 1: 1 inlet port 1: 1 outlet port 2: 2 trays 1: 1 tray 06: 6 cores
2: Dome 2: Silicon gum 2: Ribbon 1: Multi-cables/ per entry 2: 2 inlet ports 2: 2 outlet ports 4: 4 trays 2: 2 trays 12: 12 cores
3: Mussel 3: 3 inlet ports 3: 3 outlet ports 5: 5 trays 3: 3 trays 16: 16 cores
4: 4 inlet ports 4: 4 outlet ports 8: 8 trays … 24: 24 cores
… … A: 40 trays A: 10 trays 4R: 4c ribbon
… B: 12 trays 8R: 8c ribbon
C: 14 trays AR: 12c ribbon
D: 16 trays
E: 18 trays
F: 20 trays
…
H: 24 trays
…
M: 30 trays
…
K: 36 trays
…
S: 40 trays
FIbER JOINT ENCLOSURE
Fiber joint enclosure is used for jointing the fiber optical cables which are laid directly underground, in duct or aerial. Netop supplies various types of joint enclosure in different structure and with highest-quality mechanical and environment performance.
Product Overview
Netop id Shape Sealing Structure of Box Cable Type entry type Max. Inlet Cable Port Max. Outlet Cable Port Max Tray Capacity Splicing Tray Count Splicing Tray TypeN-98G X X X X X(<10) X(<10) X X XX
1: Horizontal 1: Sticky cincture 1: Bunchy 0: Standard 1: 1 inlet port 1: 1 outlet port 2: 2 trays 1: 1 tray 06: 6 cores
2: Dome 2: Silicon gum 2: Ribbon 1: Multi-cables/ per entry 2: 2 inlet ports 2: 2 outlet ports 4: 4 trays 2: 2 trays 12: 12 cores
3: Mussel 3: 3 inlet ports 3: 3 outlet ports 5: 5 trays 3: 3 trays 16: 16 cores
4: 4 inlet ports 4: 4 outlet ports 8: 8 trays … 24: 24 cores
… … A: 40 trays A: 10 trays 4R: 4c ribbon
… B: 12 trays 8R: 8c ribbon
C: 14 trays AR: 12c ribbon
D: 16 trays
E: 18 trays
F: 20 trays
…
H: 24 trays
…
M: 30 trays
…
K: 36 trays
…
S: 40 trays
26
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureFor aerial, direct burial and duct installation• Sealing structure: silicon gum or sticky cincture• Ribbon and loose tube fiber splicing• High mechanical strength against impact and compression• Level of protect: IP68•
SpecificationFiber additional attenuation: ≤0.1dB• Fiber bending radius: ≥30mm• Axes orientation tensile strength: ≥1000N• Crush resistance: ≥2000N/100mm (Direct burial), • ≥1000N/100mm (Aerial and duct)Operating temperature: -40• ℃~+85℃
max tray Capacity
Splicing Tray type
Inlet/Outlet port
Cable Diameter mm
Outside Dimension(l×W×H) mm Sealing Structure
2 12 cores/tray 4 in 4 out Φ5-Φ14 390x180x88 Sticky cincture or silicon gum
5 12 cores/tray 2 in 2 out Φ7-Φ18 460x180x108 Sticky cincture or silicon gum
544
12 cores/tray24 cores/tray72c ribbon/tray
2 in 2 out Φ7-Φ25 492x202x104 Sticky cincture
812 cores/tray24 cores/tray72c ribbon/tray
4 in 4 out Φ7-Φ25 492x200x175 Sticky cincture
In-line Type Fiber Joint Enclosure
27
Netop FTTx-O
DN
Technologies
FeatureFor aerial, and duct installation• Sealing structure: silicon gum or sticky cincture• Ribbon and loose tube fiber splicing• High mechanical strength against impact and compression• Level of protect: IP68•
SpecificationFiber additional attenuation: ≤0.1dB• Fiber bending radius: ≥30mm• Axes orientation tensile strength: ≥1000N• Crush resistance:≥1000N/100mm (Aerial and duct)• Operating temperature: -40• ℃~+85℃
max tray Capacity
Splicing Tray type
Inlet/Outlet port
Cable Diameter mm
Outside Dimension(l×W×H) mm Sealing Structure
2 6 cores/tray 2 in 2 out Φ7-Φ18 Φ85x330 Silicon gum
2 12 cores/tray 2 in 3 out Φ7-Φ18 Φ100x340 Silicon gum
412 cores/tray16 cores/tray72c ribbon/tray
3 in 3 out Φ7-Φ22 Φ210x440 Silicon gum
4 12 cores/tray24 cores/tray 3 in 3 out Φ7-Φ22 Φ210x440 Silicon gum
Dome Type Fiber Joint Enclosure
3Order Information
Netop id Shape Sealing Structure of Box Cable Type entry type Max. Inlet Cable Port Max. Outlet Cable Port Max Tray Capacity Splicing Tray Count Splicing Tray Type Function Core NumberN-98G X X X X X(<10) X(<10) X X XX X XX
1: Horizontal 1: Sticky cincture 1: Bunchy 0: Standard 1: 1 inlet port 1: 1 outlet port 2: 2 trays 1: 1 tray 06: 6 cores A: Optical distribute with SC/APC adaptors 02: 2 cores
2: Dome 2: Silicon gum 2: Ribbon 1: Multi-cables/ per entry 2: 2 inlet ports 2: 2 outlet ports 3: 3 trays 2: 2 trays 12: 12 cores B: With 1pc 1x8 splitter and splice 04: 4 cores
3: Mussel 3: 3 inlet ports 3: 3 outlet ports 4: 4 trays 3: 3 trays 16: 16 cores C: With 1pc 1x8 splitter and SC/APC distribution 08: 8 cores
4: 4 inlet ports 4: 4 outlet ports 5: 5 trays … 24: 24 cores D: With 2pcs 1x8 splitter and splice 16: 16 cores
… … 6: 6 trays A: 10 trays 4R: 4c ribbon E: With 2pcs 1x8 splitter and SC/APC distribution 18: 18 cores
8: 8 trays B: 12 trays 8R: 8c ribbon F: With 1pc 1x16 splitter and splice 20: 20 cores
A: 40 trays C: 14 trays AR: 12c ribbon G: With 1pc 1x16 splitter and SC/APC distribution …
B: 20 trays D: 16 trays H: Splice and SC/APC distribution
C: 16 trays E: 18 trays K: Optical distribute with SC/UPC adaptors
F: 20 trays L: With 1pc 1x8 splitter and splice
… M: With 1pc 1x8 splitter and SC/UPC distribution
H: 24 trays M: With 2pcs 1x8 splitter and splice
… P: With 2pcs 1x8 splitter and SC/UPC distribution
M: 30 trays Q: With 1pc 1x16 splitter and splice
… R: With 1pc 1x16 splitter and SC/UPC distribution
Q: 36 trays S: Splice and SC/UPC distribution
…
S: 40 trays
FIbER JOINT ENCLOSURE FOR SPLITTER
Splitter joint enclosure is pre-assembled and tested with optical splitters inside enclosure for distributing the power transmitted from feeder cable to distribution cables. Netop’s unique design includes the features of high capacity and easy installation.
Product Overview
Netop id Shape Sealing Structure of Box Cable Type entry type Max. Inlet Cable Port Max. Outlet Cable Port Max Tray Capacity Splicing Tray Count Splicing Tray Type Function Core NumberN-98G X X X X X(<10) X(<10) X X XX X XX
1: Horizontal 1: Sticky cincture 1: Bunchy 0: Standard 1: 1 inlet port 1: 1 outlet port 2: 2 trays 1: 1 tray 06: 6 cores A: Optical distribute with SC/APC adaptors 02: 2 cores
2: Dome 2: Silicon gum 2: Ribbon 1: Multi-cables/ per entry 2: 2 inlet ports 2: 2 outlet ports 3: 3 trays 2: 2 trays 12: 12 cores B: With 1pc 1x8 splitter and splice 04: 4 cores
3: Mussel 3: 3 inlet ports 3: 3 outlet ports 4: 4 trays 3: 3 trays 16: 16 cores C: With 1pc 1x8 splitter and SC/APC distribution 08: 8 cores
4: 4 inlet ports 4: 4 outlet ports 5: 5 trays … 24: 24 cores D: With 2pcs 1x8 splitter and splice 16: 16 cores
… … 6: 6 trays A: 10 trays 4R: 4c ribbon E: With 2pcs 1x8 splitter and SC/APC distribution 18: 18 cores
8: 8 trays B: 12 trays 8R: 8c ribbon F: With 1pc 1x16 splitter and splice 20: 20 cores
A: 40 trays C: 14 trays AR: 12c ribbon G: With 1pc 1x16 splitter and SC/APC distribution …
B: 20 trays D: 16 trays H: Splice and SC/APC distribution
C: 16 trays E: 18 trays K: Optical distribute with SC/UPC adaptors
F: 20 trays L: With 1pc 1x8 splitter and splice
… M: With 1pc 1x8 splitter and SC/UPC distribution
H: 24 trays M: With 2pcs 1x8 splitter and splice
… P: With 2pcs 1x8 splitter and SC/UPC distribution
M: 30 trays Q: With 1pc 1x16 splitter and splice
… R: With 1pc 1x16 splitter and SC/UPC distribution
Q: 36 trays S: Splice and SC/UPC distribution
…
S: 40 trays
30
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureFor aerial, direct burial and duct installation• Sealing structure: silicon gum or sticky cincture• Ribbon and loose tube fiber splicing• High mechanical strength against impact and compression• Level of protect: IP68•
SpecificationFiber additional attenuation: ≤0.01dB• Fiber bending radius: ≥30mm• Axes orientation tensile strength: ≥1000N• Crush resistance:≥1000N/100mm (Aerial and duct)• Outside dimension: Φ278 x560mm• Suitable for Ф7-Ф25mm cable• Compatible with 2pcs 1×8 splitter or 1pc 1×16 splitter• 6 cable entry ports• 6 cores and 12 cores splicing tray available• Max. tray capacity: 20 • Up to splice 240 fiber counts•
Typical Product Description
98G221166C-D12E18 192F, Dome, Fiber Joint Closure, with 1x8 splitter*2 & 18pcs SC/APC adapters
98G221166C-D12G18 192F, Dome, Fiber Joint Closure, with 1x16 splitter*1 & 18pcs SC/APC adapters
98G221166C-D12H18 192F, Dome, Fiber Joint Closure, with 20xSC/APC termination panel
Dome Fiber Joint Enclosure for Splitter
31
Netop FTTx-O
DN
Technologies
FeatureFor aerial, direct burial and duct installation• Sealing structure: silicon gum or sticky cincture• Ribbon and loose tube fiber splicing• High mechanical strength against impact and compression• level of protect: IP68•
Typical Product Description
SpecificationFiber additional attenuation: ≤0.01dB• Fiber bending radius: ≥30mm• Axes orientation tensile strength: ≥1000N• Crush resistance: ≥2000N/100mm (Direct burial), • ≥1000N/100mm (Aerial and duct)Operating temperature: -40• ℃~+60℃
Outside dimension: 490x200x140mm• Suitable for Ф7-Ф25mm cable• Compatible with 2pcs 1×8 splitter or 1pc 1×16 splitter• 6 cable entry ports• 6 cores and 12 cores splicing tray available• Max. tray capacity: 6 • Up to splice 72 fiber counts•
98G1211663-324E18 72F, Horizontal, Fiber Joint Closure, with 1x8 splitter*2 & 18pcs SC/APC adapters
98G1211663-324G18 72F, Horizontal, Fiber Joint Closure, with 1x16 splitter*1 & 18pcs SC/APC adapters
98G1211663-324H18 72F, Horizontal, Fiber Joint Closure, with 20xSC/APC termination panel
In-line Fiber Joint Enclosure for Splitter
4N-Netop id Max. Distribution Capacity Adapter Type Interface Body Material Operation Type Core Number Require Pigtail LoadedOCC- XXX X X X X XXX X
144 0: Null 0: Null 1: SMC A: Single face 024: 24 cores 0: Without pigtail
288 1: SC simplex 1: UPC 2: Stainless steel B: Double face 072: 72 cores 1: With 0.9mm pigtails
576 2: SC duplex 2: APC 3: SPCC 192: 192 cores 2: With customerized pigtails
768 3: FC simplex 384: 384 cores
4: LC duplex Full loaded or customerized
Order Information
OPTICAL CAbLE CROSS CONNECTING CAbINET
Optical Cable Cross Connecting Cabinet (hereafter named OCC) is used to connect the fiber trunk cable and the distribution cable between the interface device, which has the import of cable, fastness, grounding protection, welding, jumping (distribution), storage, switching and other functions. With a high versatility in the optical route, especially for fiber optical communication system into a central office trunk cable and distribution side, can achieve the fiber optic lines linked, distributed and transited easily.
Product Overview
N-Netop id Max. Distribution Capacity Adapter Type Interface Body Material Operation Type Core Number Require Pigtail LoadedOCC- XXX X X X X XXX X
144 0: Null 0: Null 1: SMC A: Single face 024: 24 cores 0: Without pigtail
288 1: SC simplex 1: UPC 2: Stainless steel B: Double face 072: 72 cores 1: With 0.9mm pigtails
576 2: SC duplex 2: APC 3: SPCC 192: 192 cores 2: With customerized pigtails
768 3: FC simplex 384: 384 cores
4: LC duplex Full loaded or customerized
34
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureCabinet is made of high strength stainless steel, protection • class IP65, high intension, corrosion-resistant, all-weather protection and can resist accidental damage or malignant destruction. Closed cabinet structure, supply the cable terminal and • distribution with physical protection, prevent the optical fiber cable from accidental damage. Cable entrance from the rack at the bottom and be fixed, • grounding and protection. The series OCC bottom has four φ13 holes, which can be • pre-installed into the M10 expansion bolts on the base. Put on the OCC with the fastening nut.
SpecificationOCC standard: YD/T988-2007 • Connecter loss(including insertion, Changeability and • Durability)≤0.5dB Insert loss≤0.2dB • Return loss: PC≥40dB UPC≥50dB APC≥60dB • Connector life>1000 times • Insulation resistance (between frame and protection • grounding)>20000MΩ/500V(DC) Dielectric strength (between frame and protection grounding)• >3000V(DC)/1min no breakdown, no arc Dimension: 1450×750×320 mm • Installation dimension: 700mm×200 mm • Single side operation • Weight: 185 Kg•
FeatureCabinet is made of high strength stainless steel, protection • class IP65, high intension, corrosion-resistant, all-weather protection and can resist accidental damage or malignant destruction. Closed cabinet structure, supply the cable terminal and • distribution with physical protection, prevent the optical fiber cable from accidental damage. Cable entrance from the rack at the bottom and be fixed, • grounding and protection. The series OCC bottom has four φ13 holes, which can be • pre-installed into the M10 expansion bolts on the base. Put on the OCC with the fastening nut.
SpecificationComply with YD/T998-2007 • Connecter loss(including insertion, Changeability and • Durability)≤0.5dB Insert loss≤0.2dB • Return loss: PC≥40dB UPC≥50dB APC≥60dB • Connector life>1000 times • Insulation resistance (between frame and protection • grounding)>20000MΩ/500V(DC) Dielectric strength (between frame and protection grounding)• >3000V(DC)/1min no breakdown, no arc. Dimension: 1350×650×320 mm • Installation dimension: 600×200 mm • Single side operation • Weight: 150 Kg•
288F Stainless Cabinet144F Stainless Cabinet
35
Netop FTTx-O
DN
Technologies
A: Double-layer stainless steel cabinetB: Optical Fiber Fusion and Distribution Intergrated ModuleC: Optical splice UnitD: Cable import UnitE: Double-layer stainless steel front doorF: Cabinet bottom
Accessories Name Qty UnitOcc User Manual 1 ea
Proved Certification 1 ea
Expansion Screw 4 set
Nylon Ties 20 ea
Key 1 set
Fiber Protecting Tube 1 set
Fiber Heat-shrinkable Tube 1 set
3M Tape 1 ea
FeatureCabinet is made of high strength stainless steel, protection class IP65, high intension, corrosion-resistant, all-weather protection and • can resist accidental damage or malignant destruction. Closed cabinet structure, supply the cable terminal and distribution with physical protection, prevent the optical fiber cable from • accidental damage. Cable entrance from the rack at the bottom and be fixed, grounding and protection. • The series OCC bottom has four φ13 holes, which can be pre-installed into the M10 expansion bolts on the base. Put on the OCC • with the fastening nut.
SpecificationOCC standard: YD/T988-2007 • Connecter loss(including insertion, Changeability and • Durability)≤0.5dB Insert loss≤0.2dB • Return loss: PC≥40dB UPC≥50dB APC≥60dB • Connector life>1000 times • Insulation resistance (between frame and protection • grounding)>20000MΩ/500V(DC) Dielectric strength (between frame and protection grounding)• >3000V(DC)/1min no breakdown, no arc Dimension: 1450×750×320 mm • Installation dimension: 700×460 mm • Double side operation • Weight: 225 Kg•
576F Stainless Cabinet
FIbER dISTRIbUTION SYSTEM
The system of Fiber Distribution Includes the Following Products:Splitter Distribution Cabinet 37Distribution Cable 41
1SPLITTER dISTRIbUTION CAbINET
Netop splitter distribution cabinet (SDC) can provide extreme-high distribution capacity by applying high split-ratio components and state-of-art mechanical design techniques. The double-sided operation and modular design make the SDC installation and maintenance very easily, as well that it is convenient for future system expansion.
Order Information
Product Overview
Netop id Envirement Adapter
type Interface Cabinet Material
Operation type Installation
max. Distribution Capacity
Pigtail Loaded
N-SDC- X X X X X X XXX X
1: Outdoor 1: SC simplex 1: UPC 1: SPCC A: Single face 1: Wall mount 032 0: Without pigtail
2: Indoor 2: SC duplex 2: APC 2: Stainless steel B: Double face 2: Free-standing 072 1: With 0.9mm pigtails
3: LC simplex 3: SMC 144With customerized pigtails
4: LC duplex 192
5: FC Simplex 288
384
38
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureBody case is made of high-quality steel sheet, surface plastic spray• Double-sided operation(front and rear), divided management• Suitable for outdoor installation with IP65 protection• Whole hinge lock, fixed with three points• Various interface available SC, FC or LC•
SpecificationMax fiber capacity: 384• Suitable for Ф7-Ф25mm cable• Fiber bending radius: ≥30mm• Provides the fixture and grounding device for 6 outdoor cables• Supports up to 12pcs 1×32 (2×32) splitter modules or 24pcs 1×16 splitter modules• Parking lot accommodates up to 288 splitter output ports• 6 cores and 12 cores splicing tray available• Max. tray capacity: 6 • Supports pre-terminated cable or splicing cable• Dimension mm: 1200×600×320• Operating temperature: -40• ℃~+60℃
Front Rear
Splitter Distribution
Cable Distribution
Earthing Sheet Copper
Pre-terminated Cable
Splitter Module
Splice Tray
Parking Lot
384-fiber Splitter Distribution Cabinet
39
Netop FTTx-O
DN
Technologies
FeatureBody case is made of high-quality steel sheet, surface plastic spray• Double-sided operation(front and rear), divided management• Suitable for outdoor installation with IP65 protection• Whole hinge lock, fixed with three points• Various interface available SC, FC or LC•
SpecificationMax fiber capacity: 192• Suitable for Ф7-Ф25mm cable• Fiber bending radius: ≥30mm• Provides the fixture and grounding device for 6 outdoor cables• Supports up to 6pcs 1×32 (2×32) splitter modules or 12pcs • 1×16 splitter modulesParking lot accommodates up to 144 splitter output ports• 6 cores and 12 cores splicing tray available• Max. tray capacity: 6 • Supports pre-terminated cable or splicing cable• Dimension mm: 900×600×300• Operating temperature: -40• ℃~+60℃
192-fiber Splitter Distribution Cabinet
Splitter Distribution
Splitter Module
Parking Lot
Pre-terminated Cable
Cable Distribution
Splice Tray
40
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureBody case is made of high-quality steel sheet, surface plastic • spraySingle-sided operation, divided management• Suitable for outdoor installation with IP65 protection• Whole hinge lock, fixed with three points•
SpecificationMax fiber capacity: 144• Suitable for Ф7-Ф25mm cable• Fiber bending radius: ≥30mm• Provides the fixture and grounding device for 6 outdoor cables• Supports up to 6pcs 1×32 (2×32) splitter modules or 12pcs • 1×16 splitter modulesParking lot accommodates up to 64 splitter output ports• Modular structure: 12pcs termination and splicing modules• Supports pre-terminated cable or splicing cable• Dimension mm: 1000×600×300• Operating temperature: -40• ℃~+60℃
32-fiber Splitter DistributionCabinet
FeatureBody case is made of high-quality steel sheet, surface plastic • spraySingle door, front operation, divided management• Wall mount and pole mount available• Suitable for outdoor installation with IP65 protection• Various interface available SC, FC or LC•
SpecificationMax fiber capacity: 32• Suitable for Ф7-Ф25mm cable• Fiber bending radius: ≥30mm• Provides the fixture and grounding device for 4 outdoor cables• Supports up to 1pc 1×32 (2×32) splitter modules or 2pcs • 1×16 splitter modulesParking lot accommodates up to 32 splitter output ports• 6 cores and 12 cores splicing tray available• Modular structure: 12pcs termination and splicing modules• Dimension mm: 500×480×110• Operating temperature: -40• ℃~+60℃
144-fiber Splitter DistributionCabinet
Left area for Splicing and cabling
Right area for splitting and parking
Outlet Cable
Inlet Cable
Earthing Sheet Copper
Splitter Module
Splice Tray
Parking Lot
2dISTRIbUTION CAbLE
Fiber optic distribution cable can be made of indoor or outdoor sheathed jackets for different environment conditions, and which function is to get the splitter distribution cabinet (SDC) and fiber distribution (FDU) linked. Netop is able to design and make it to the specific configuration requirements.
Order Information
Product Overview
Netop id
FO Cable type
Fiber Structure type
Sequence No.
Cable Structure Information Fiber No. Fiber Type Extended
Information
N- X X XXX Detail according to catalogue XXX XXXXX Detail according to
customer's request
F: Fiber 1: 250μm bunchy fiber 001 002: 2 cores 9OS1B: SM 9/125
A: Outdoor 2: Ribbon fiber 002 004: 4 cores 9OS2D: G.652D
U: Outdoor &Indoor 3: Buffered fiber 003 012: 12 cores 62OM1: MM62.5/125
I: Indoor 4: No Fiber … 024: 24 cores 50OM2: MM50/125
S: Special 192: 192 cores …
…
Detail according to Catalogue
(Other see <Netop Cable Systems>)
42
Net
op F
TTx-
OD
N T
echn
olog
ies
I-V(ZN)HH -L-Distribution
Feature Large cores distribution indoor cableWith aramid yarn as strength member
Halogen-free jacket
Comply with DIN VDE 0888-6 and IEC 60794-2• Application: • Premises distribution system Horizontal backbone cabling Indoor LAN InterconnectHigher mechanical properties and other options on request • Dielectric strength member is available on request•
0.9mm Distribution Cable
43
Netop FTTx-O
DN
Technologies
Buffer 0.9mm tight buffer or semi-tight buffer
Buffer Color The standard color refer to color code on page 6 of <Netop Cable Systems>
Strength Member Aramid yarn
Subunit 6 cores of 0.9mm buffers
Subunit Jacket Flame-retardant and low smoke halogen-free jacket
Central Member FRP as the dielectric member for central strength element with no bonding
Ripcord Easily ripping the cable jacket
Cable Jacket Flame-retardant and low smoke halogen-free jacket and excellent UV-resistance
Color of Jacket and Subunit Jacket
Yellow for single modeOrange for multi modeAqua for OM3Other standard color on request on page 6 of <Netop Cable Systems>
Specification
Fiber Count Subunit Count
Nominal Cable Diameter mm
Nominal Cable Weight Kg/Km
Tensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
24 4 10.4 85 400/1300 300/1000
36 6 13.5 95 400/1300 300/1000
42 7 14.6 185 400/1300 300/1000
48 8 15.7 265 400/1300 300/1000
60 10 18.2 320 400/1300 300/1000
72 12 20.5 440 400/1300 300/1000
Ordering Information
1 product typeNI3013 = Product No.
2 Jacket ColorYL = Yellow…See Netop Color Code on Page 6 of <Netop Cable Systems>
3 Jacket material02 = LSZH04 = PVC <OFNR>05 = PVC <OFNP>
5 Buffer typeT = Tight BufferS = Semi-Tight BufferL = Loose Buffer
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count024 = 24 Cores…Others (036 to 072)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NI3013 - □□ 0 2 - RD □ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
4 Fan-out unit diameterRD = Round Cable
44
Net
op F
TTx-
OD
N T
echn
olog
ies
Buffer 0.9mm tight buffer or semi-tight buffer
Buffer Color White or other standard color on page 6 of <Netop Cable Systems>
Strength Member Aramid yarn
Subunit 2.0mm or 3.0mm
Subunit Jacket Flame-retardant and Low Smoke Halogen-free jacket
Central Member FRP as the dielectric member for central strength element with no bonding
Ripcord Easily ripping the cable jacket
Cable Jacket Flame-retardant and Low Smok Halogen-free jacket and excellent UV-resistance
Color of Jacket and Subunit Jacket
Yellow for Single ModeOrange for Multi ModeAqua for OM3Other standard color on request on page 6 of <Netop Cable Systems>
I-V(ZN)HH -BREAK-OUT
Specification
FeatureMulti cores breatout cable with 2.0mm and 3.0mm subunits• With aramid yarn as strength member• Halogen-free jacket• Comply with DIN VDE 0888-6 and IEC 60794-2• Application: • Premises distribution system Horizontal backbone cabling Indoor LAN InterconnectHigher mechanical properties and other options on request • Dielectric strength member is available on request•
2.0mm Distribution Cable
45
Netop FTTx-O
DN
Technologies
Fiber Count Subunit Count Diameter mm
Nominal Cable Diameter mm
Nominal Cable Weight Kg/Km
Tensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
2 2.0 5.9 28 250/800 300/1000
4 2.0 5.9 39 250/800 300/1000
6 2.0 8.3 70 250/800 300/1000
8 2.0 8.1 76 300/1000 300/1000
12 2.0 10.4 80 300/1000 300/1000
16 2.0 11.3 103 500/1500 300/1000
24 2.0 13.9 160 500/1500 300/1000
2 3.0 7.7 50 250/800 300/1000
4 3.0 7.7 59 250/800 300/1000
6 3.0 10.4 88 250/800 300/1000
8 3.0 12.3 122 300/1000 300/1000
12 3.0 13.5 128 300/1000 300/1000
16 3.0 15.5 185 500/1500 300/1000
24 3.0 19.3 288 500/1500 300/1000
Ordering Information
1 product typeNI3014 = Product No.
2 Jacket ColorYL = Yellow…See Netop Color Code on Page 6 of <Netop Cable Systems>
3 Jacket material02 = LSZH04 = PVC <OFNR>05 = PVC <OFNP>
5 Buffer typeT = Tight BufferS = Semi-Tight BufferL = Loose Buffer
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count002 = 2 Cores…Others (004 to 024)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NI3014 - □□ 0 2 - □□ □ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
4 Sub unit diameter20 = 2.0mm30 = 3.0mm
dROP CAbLE SYSTEM
The System of Drop Cable Includes the Following Products:Optical Fiber Distribution Unit 47Drop Cable for FTTH 51
1OPTICAL FIbER dISTRIbUTION UNIT
Distribution cable and drop cable is connected in between the optical fiber distribution unit (FDU), which is an important part of the whole optical distribution network (ODN). Netop’s FDU is very flexible on capacity and coupling interface configuration requirements. Both indoor and outdoor applicable FDU are available from Netop Technologies.
Order Information
Product Overview
Envirement Adapter Type Interface Cabinet Material Max. Capacity Splice Tray/PigtailN-FDU- X X X X XXX X
1: Outdoor 0: No adapter 0: No adaptor 1: SPCC 002: 2 cores A: No splice tray
2: Indoor 1: SC simplex 1: UPC 2: Stainless steel 004: 4 cores B: No pigtail
2: SC duplex 2: APC 3: SMC 008: 8 cores C: With 0.9mm pigtail 2m
3: LC simplex 012: 12 cores D: With 2.0mm pigtail 2m
4: LC duplex 024: 24 cores E: With 3.0mm pigtail 2m
5: FC simplex 036: 36 cores
6: ST simplex 048: 48 cores
7: MPO adaptor 072: 72 cores
096: 96 cores
48
Net
op F
TTx-
OD
N T
echn
olog
ies
Splice Tray
Inlet Cable
Drop Cable
FeatureBody case is made of high-quality steel sheet, surface plastic spray• Wall mount and pole mount available• Inlet cable can either be loose tube cable or slotted cable• Outlet cable can either be optical fiber cord or drop cable•
SpecificationMax fiber capacity: 72• Fiber bending radius: ≥30mm• Suitable for Ф7-Ф25mm cable• 6 cores and 12 cores splicing tray available• Modular structure: 6pcs termination and splicing modules• Suitable for outdoor installation with IP65 protection • Operating temperature: -40• ℃~+85℃
Outdoor FDU
49
Netop FTTx-O
DN
Technologies
FeatureBody case is made of high-quality steel sheet, surface plastic spray• Wall mount and pole mount available• Inlet cable can either be loose tube cable or slotted cable• Outlet cable can either be optical fiber cord or drop cable•
SpecificationMax fiber capacity: 24• Fiber bending radius: ≥30mm• Suitable for Ф7-Ф25mm cable• 6 cores and 12 cores splicing tray available• Modular structure: 6pcs termination and splicing modules• Suitable for outdoor installation with IP65 protection • Operating temperature: -40• ℃~+85℃
Outdoor FDU with Adapter
50
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureBody case is made of high-quality steel sheet, surface plastic spray• Wall mount and pole mount available• Inlet cable can either be loose tube cable or slotted cable• Outlet cable can either be optical fiber cord or drop cable•
SpecificationMax fiber capacity: 72• Fiber bending radius: ≥30mm• Suitable for Ф7-Ф25mm cable• 6 cores and 12 cores splicing tray available• Modular structure: 6pcs termination and splicing modules• Suitable for outdoor installation with IP65 protection • Operating temperature: -40• ℃~+85℃
P/N Description Dimension W x H x D mm Splice Tray Counts Max.N-FDU-1001012B 12F Outdoor FDU, SPCC 230 x 350 x 100 1
N-FDU-1001024B 24F Outdoor FDU, SPCC 230 x 350 x 100 2
N-FDU-1001048B 48F Outdoor FDU, SPCC 230 x 350 x 110 4
N-FDU-1111024D 24F Outdoor FDU,SC/UPC simplex, SPCC 230 x 350 x 110 2
N-FDU-1111048D 48F Outdoor FDU,SC/UPC simplex, SPCC 350 x 380 x 110 4
N-FDU-1121004D 4F Outdoor FDU,SC/APC simplex, SPCC 200 x 250 x 55 1
N-FDU-1121096D 96F Outdoor FDU,SC/APC simplex, SPCC 500 x 480 x 200 8
N-FDU-1411008A 8F Outdoor FDU,LC/UPC duplex, SPCC 240 x 290 x 70 0
N-FDU-1411012D 12F Outdoor FDU,LC/UPC duplex, SPCC 230 x 290 x 70 1
N-FDU-1412024A 24F Outdoor FDU,LCD/UPC, stainless steel 240 x 290 x 80 0
N-FDU-2001012B 12F Indoor FDU, SPCC 190 x 290 x 80 1
N-FDU-2001024B 24F Indoor FDU, SPCC 190 x 290 x 80 2
N-FDU-2001048B 48F Indoor FDU, SPCC 190 x 290 x 100 4
N-FDU-2111012D 12F Indoor FDU,SC/UPC simplex, SPCC 250 x 200 x 70 1
N-FDU-2111024D 24F Indoor FDU,SC/UPC simplex, SPCC 300 x 310 x 85 2
N-FDU-2111048D 48F Indoor FDU,SC/UPC simplex, SPCC 300 x 310 x 100 4
N-FDU-2411012D 12F Indoor FDU,LC/UPC duplex, SPCC 230 x 290 x 70 1
N-FDU-2411024A 24F Indoor FDU,LCD/UPC, SPCC 240 x 290 x 80 0
N-FDU-2411024C 24F Indoor FDU,LCD/UPC, SPCC, with pigtail 240 x 290 x 80 2
N-FDU-2411048C 48F Indoor FDU,LCD/UPC, SPCC, with pigtail 250 x 350 x 90 4
Indoor FDU
Splice Tray
Inlet Cable
Drop Cable
2dROP CAbLE FOR FTTH
Netop offers the compact, durable and self-supporting micro FTTH fiber cable in full-dry construction, and which supports the last-mile of the passive optical distribution network (ODN). The Netop micro FTTH cable can be for direct burial, duct or aerial installation as options.
Product Overview
Order Information
Netop id FO Cable Type Fiber Structure
typeSequence No.
Cable Structure Information
Fiber No. Fiber Type Extended Information
N- X X XXX Detail according to catalogue XXX XXXXX
Detail according to customer's request
F: Fiber 1: 250μm bunchy fiber 001 002: 2 cores 9OS1B: SM 9/125
A: Outdoor 2: Ribbon fiber 002 004: 4 cores 9OS2D: G.652D
U: Outdoor & Indoor 3: Buffered fiber 003 012: 12 cores 62OM1: MM62.5/125
I: Indoor 4: No fiber … 024: 24 cores 50OM2: MM50/125
S:Special 192: 192 cores …
…
Other see <Netop Cable Systems>
52
Net
op F
TTx-
OD
N T
echn
olog
ies
i-(ZN)H -drop
Feature Micro cable for FTTHWith FRP as strength member
Halogen-free jacket
Comply with IEC 60794-2• Application: • Installation in small bending environment indoor FTTx project for Indoor cableBending radius can be achieved up to 15mm• G.657 fiber is recommended for this cable• Higher mechanical properties and other options on request • Dielectric strength member is available on request•
Drop Cable
53
Netop FTTx-O
DN
Technologies
Fiber Count
Nominal Cable Diameter mm Fiber Structure Nominal Cable
Weight Kg/KmTensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
1 2.0*3.0 0.25mm 8.1 30/60 300/1000
2 2.0*3.4 0.25mm*2 8.5 30/60 300/1000
4 2.0*4.0 Ribbon fiber 9.8 30/60 300/1000
Fiber Type 250μm fiber or ribbon fiber
Fiber Color Standard color on page 6 of <Netop Cable Systems>
Strength Member Two parallel FRPs as the dielectric members for strength element with no bonding
Cable Jacket Flame-retardant and Low Smoke Halogen-free jacket and excellent UV-resistance
Color of Jacket Black or other standard color on request on page 6 of <Netop Cable Systems>
Specification
Ordering Information
1 product typeNS1001 = Product No.
2 Jacket ColorBK = Black…See Netop Color Code on Page 6 of <Netop Cable Systems>
3 Jacket material02 = LSZH
4 Strength member0 = FRP Strength Member1 = Steel Wire Strength Member
5 Buffer typeF = FiberR = Ribbon Fiber
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count001 = 1 Core…Others (002 to 004)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NS1001 - □□ 02 - □ □ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
54
Net
op F
TTx-
OD
N T
echn
olog
ies
i-(ZN)H –Fly
Feature Drop micro cable for FTTH with steel for dragWith FRP as strength member
Helogen-free jacket
Comply with IEC 60794-2• Application: • Installation in small bending environment indoor/outdoor FTTx project for indoor cableG.657 fiber is recommended for this cable• Higher mechanical properties and other options on request • Dielectric strength member is available on request•
Aerial Drop Cable
55
Netop FTTx-O
DN
Technologies
Fiber Count
Nominal Cable Diameter mm Fiber Structure Nominal Cable
Weight Kg/KmTensile Strength Long/Short N
Crush Resistance Long/Short N/10cm
1 2.0*5.0 0.25mm 19.1 60/120 300/1000
2 2.0*5.0 0.25mm*2 20.1 60/120 300/1000
4 2.0*5.6 Ribbon fiber 22.5 60/120 300/1000
Fiber Type 250μm fiber or ribbon fiber
Fiber Color Standard color on page 6 of <Netop Cable Systems>
Strength Member Two parallel FRPs as the dielectric members for strength element with no bonding
Drag Member Steel
Cable Jacket Flame-retardant and Low Smoke and Halogen-free jacket and excellent UV-resistance
Color of Jacket Black or other standard color on request on page 6 of <Netop Cable Systems>
Specification
Ordering Information
1 product typeNS1002 = Product No.
2 Jacket ColorBK = Black…See Netop Color Code on Page 6 of <Netop Cable Systems>
3 Jacket material02 = LSZH
4 Strength member0 = FRP Strength Member1 = Steel Wire Strength Member
5 Buffer typeF = FiberR = Ribbon Fiber
6 length markingM = Markings in Meters (Standard)F = Markings in Feet
7 Fiber Count001 = 1 Core…Others (002 to 004)
8 Fiber Symbol9OS2D = Fiber G.652D…See Fiber Indicate Symbol on Page 12 of <Netop Cable System>
NS1002 - □□ 02 - □ □ - □ - □□□ - □□□□□
1 2 3 4 5 6 7 8
FIbER TERMINATION SYSTEMThe System of Fiber Termination Includes the Following Products:Outdoor Optical Terminal Box 57Fiber Faceplate Box 59Fast Field-assembly Splicing and Connecting Product 62
1OUTdOOR OPTICAL TERMINAL bOx
Outdoor optical terminal box is used for terminating drop cable in outdoor environment. Working as the customer FTTH application interface, Netop optical terminal box is applicable for site-splicing, field-installable connector termination or mechanical splice installation.
Order Information
Product Overview
Envirement Adapter Type Interface Cabinet Material Max. Capacity Splice Tray/PigtailN-FDU- X X X X XXX X
1: Outdoor 0: No adapter 0: No adaptor 1: SPCC 002: 2 cores A: No splice tray
2: Indoor 1: SC simplex 1: UPC 2: Stainless steel 004: 4 cores B: No pigtail
2: SC duplex 2: APC 3: SMC 008: 8 cores C: With 0.9mm pigtail 2m
3: LC simplex 012: 12 cores D: With 2.0mm pigtail 2m
4: LC duplex 024: 24 cores E: With 3.0mm pigtail 2m
5: FC simplex 036: 36 cores
6: ST simplex 048: 48 cores
7: MPO adaptor 072: 72 cores
096: 96 cores
58
Net
op F
TTx-
OD
N T
echn
olog
ies
Splice Tray
Hinge
FeatureSuitable for the protective connection between cables and pigtails• Suitable for simplex and duplex different adapter.• Lockable door providing good security•
SpecificationSuitable for 4 fibers indoor drop cable• Fiber bending radius: ≥30mm• Products classification: pole mounted, wall mount. • IP65 protection for outdoor environment• Dimension: 200 x 250 x 55• Operating temperature: -40• ℃~+85℃
Outdoor Optical Terminal Box
2FIbER FACEPLATE bOx
Netop fiber faceplate box works as the customer Fiber To The Desk (FTTD) application interface, which is specially designed to adopt the drop cable installations by having unique structure inside for excessive cable storage by maintaining good bending radius of the cable. The box is applicable for site-splicing, field-installable connector termination or mechanical splice installation.
Order Information
Product Overview
Netop id Adapter Type Fiber Number Series Customer IDN-FFB- X X X X: First letter of customer's name
1: SC/APC simplex 0: without pigtail A: A type N: Netop standard
2: SC/UPC simplex 1: 1 fiber B: B type
3: SC/APC duplex 2: 2 fiber C: C type
4: SC/UPC duplex 4: 4 fiber
5: LC/APC duplex
6: LC/UPC duplex
7: FC/APC simplex
8: FC/UPC simplex
60
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureTop and bottom cable entry hold available• With hinge and lock protection• Compatible with three connect methods • a. Directly connect drop cable with field assembled fast connector b. Connect drop cable and pigtail with mechanical splice unit c. Connect drop cable and pigtail by using heat splicing method
SpecificationSuitable for 2 fibers indoor drop cable• Dimension: 160mmX96mmX30mm•
1
5
2 3 4
FeatureTop and bottom cable entry hold available• Compatible with three connect methods • a. Directly connect drop cable with field assembled fast connector b. Connect drop cable and pigtail with mechanical splice unit c. Connect drop cable and pigtail by using heat splicing method
SpecificationSuitable for 2 fibers indoor drop cable• Dimension: 86mmX86mmX30mm•
Fiber Entry HoleFixing Slot for Fusion Splicer Protection Tube
Drop Cable
Wall Installation Hole
Spring Shutter
1. Fixing slot for fusion splicer protection tube: 2 places2. Wall installation hole: 4 places3. Fiber entry hole: 2 places4. Fiber holder: 2 places5. Fixing slot for adaptor: 2 places
Fiber Faceplate Box -Type A Fiber Faceplate Box- Type B
61
Netop FTTx-O
DN
Technologies
FeatureFFB type C are used to connect workplace computers with the horizontal • fiber-optic installationConnectivity system ST, SC-duplex, LC-duplex and MT-RJ are supported• Fit with standard 86x86mm wall back box • 45 degree angled outlet without coupler / keystone attached • Fiber optic adapters or modules available • Delivered with installation screws and labeling system•
SpecificationSuitable for 2 fibers indoor drop cable• Dimension: 86mmX86mmX30mm•
Fiber Faceplate Box- Type C
FIELd-INSTALLAbLE FIbER OPTIC CONNECTOR
Netop field-installable fiber optic Connector includes both SC and FC types, which take the advantage of the latest Netop rapid ready-termination technology. The Netop field-installable fiber optic connector provides high-quality mechanical and optical performance which meet or exceed the factory-installed fiber optic connectors.
Product Overview3
Order Information
Netop id Fiber Type Cable Type Connector Type Interface Type SeriesN-FC- X X XX X X
C: SingleMode & MultiMode 2: 250 µm SC: SC connector U: UPC A: A type
S: SigleMode 9: 900 µm FC: FC connector A: APC
M: MultiMode 3: 2.0 mm & 3.0 mm LC: LC connector
F: 3.1x2.0mm figure-8 drop cable
63
Netop FTTx-O
DN
Technologies
N-FC-CxSCUA
Figure -8 drop cable stripper
ClampField Assembly Connector Construction
Coat Stripper
Clamp for N-FC-CxSCUA
N-FC-CxFCUA
item Technical ParametersFiber Mode Single & multi mode
Operation Time About 120s(no fiber cut)
Insert Loss ≤ 0.3dB(1310nm & 1550nm)
Return Loss ≤ -40dB
Fastening Strength of Naked Fiber >5 N
Fastening Strength of Naked Fiber Holder >10 N
Tensile Strength >50 N
Using Temperature -40~+75℃
On-line Tensile Strength (20 N) △ IL ≤ 0.2dB △ RL ≤ 5dB
Mechanical Durability (500 Times) △ IL ≤ 0.2dB △ RL ≤ 5dB
Drop-off Test (Drop-off Height 4m, Once per Direction, Totally 3 Times) △ IL ≤ 0.2dB △ RL ≤ 5dB
FeatureBased on the unique Netop pluggable non-preset tube • technology.Precision ceramic components with co-axial self centering, • excellent and durable optical property.Optical fiber fits axially in elastic way and avoids completely • any false connect.Triple clamping through the naked fiber, tight buffer and cable, • etc., can be used as patchcord.High on-line tensile strength of optical fast connector after • terminating, always keep connectingUnder the force from cabling and drawing.• Integrated protection of the casing to withstand harsh user • environment.Directly connectable with ONU without any optical socket, • which reduces FTTH cost.High success rate and easiness in installation with average • splicing time 100 sec.Lower requirement for the habit working and work environment • call for to the builder .Visible Installation quality; independent from any far end light • source and special device satisfyingCabling construction in any sectioned way•
Specification
SC series:
Related tools:
FC series:
Fast Termination Connector
PASSIVE OPTICAL COMPONENTThe System of Passive Optical Component Includes the Following Products:Optical Splitter 65Optical Fiber Patch Cord 68Optical Fiber Adapter and Connector 71
Order Information
Netop id Input Port Output Port Fiber Length Grade Fiber TypeN-RPS X XX XX X X
1: 1 port 02: 2 ports 10: 1.0m 1: Grade P 1: 250μm
2: 2 port 03: 3 ports 15: 1.5m 2: Grade S 2: 900μm
04: 4 ports Customized
06: 6 ports
08: 8 ports
12: 12 ports
16: 16 ports
24: 24 ports
32: 32 ports
64: 64 ports
0A: 128 ports
1
Netop id Input Port Output Port Fiber Type Fiber Length Connector/Adapter Type
Connector Surface Module type
N-PSM X XX X XX X X X
1: 1 port 02: 2 ports 0: Adapter 00-Null 0: Null 0: Null A: Plastic module
2: 2 port 03: 3 ports 1: 900μm 10: 1.0m 1: SC 1: UPC B: Metal module
04: 4 ports 2: 2.0mm 15: 1.5m 2: FC 2: APC C: 19" rack-mount
06: 6 ports 3: 3.0mm Customized 3: LC D: Wall-mount
08: 8 ports 4: ST
12: 12 ports
16: 16 ports
24: 24 ports
32: 32 ports
64: 64 ports
0A: 128 ports
OPTICAL SPLITTER
Netop fiber optical splitter can be supplied in different forms, and which provides function of distributing down-link data and converge up-link data. It adopts TDM technology on the down-link and implements RDM-related access protocols on the up-link. To satisfy the requirements of the different application scenarios Netop designs, produces and supplies 19” rack-mountable, modular or individual packed splitter products by applying the most compact integration techniques.
Product Overview
66
Net
op F
TTx-
OD
N T
echn
olog
ies
parameter 1x4 1x8 1x16 1x32 1x641 Operating Wavelength nm 1260-1650
2 Insertion Loss dB Max. 7.2 10.5 13.5 16.5 20
3 Loss Uniformity dB Max. 0.6 0.8 1.2 1.7 2.5
4 Return Loss dB Min. 55 55 55 55 50
5 PDL dB Max. 0.2 0.3 0.3 0.3 0.4
6 Directivity dB Min. 55 55 55 55 55
7 Operating Temperature ℃ -40~85
8 Storage Temperature ℃ -40~85
Specification
Note: All measurements were done at room temperature and specifications exclude connectors.
FeatureLow insertion loss and PDL• FBT and PLC technology• Wide operation wavelength and temperature• High reliability and stability • 1 or 2 input channel • 4, 8, 16, 32 and 64 output channel available• Flexible fanout length and various connector type available•
Optical Splitter
67
Netop FTTx-O
DN
Technologies
parameter 1x4 1x8 1x16 1x32 1x641 Operating Wavelength nm 1260-1650
2 Insertion Loss dB Max. 7.2 10.7 13.7 16.9 21
3 Loss Uniformity dB Max. 0.6 0.8 1.2 1.7 2.5
4 Return Loss dB Min. 55 55 55 55 50
5 PDL dB Max. 0.2 0.3 0.3 0.3 0.4
6 Directivity dB Min. 55 55 55 55 55
7 Operating Temperature ℃ -40~85
8 Storage Temperature ℃ -40~85
9 Packaging Size(L x W x H) mm 40x4x4 40x4x4 40x4x4 50x7x4 60x12x4
Specification
Note: All measurements were done at room temperature and specifications exclude connectors.
FeatureMade of high quality steel sheet or ABS, surface plastic spray• Modularized design, convenient for installation and maintenance • Fiber additional attenuation: ≤0. 1dB• Coiling radius of internal ribbon fiber: >30mm• Operating temperature: -40• ℃~+80℃
Fiber riveted by crimp body at root• Fiber protected by strain relief at root• 1 or 2 input channel• 4, 8, 16, 32 and 64 output channel available• Multi-interface and length to be chosen•
Splitter Module
2Order Information
Single-mode Patch cord or Pigtail
Netop id Fiber Type Diameter Product Type Interface A Interface A Interface B Unit LengthN-98C X X X X X X X XXXX
S: SM riser 2: 2mm 0: Pigtail 1: UPC-UPC 1: ST 1: STM: Meter
Cable length
E: SM LSZH 3: 3mm 1: Patchcord 2: Null 2: SC 2: SC XXX.X meter
I: SM plenum 6: 1.6mm 2: Duplex pigtail 3: APC-APC 3: FC 3: FCF: Feet
Cable length
P: SM G655 riser 8: 1.8mm 3: Duplex patchcord 4: PC-APC 4: LC 4: LC XXX.X feet
Z: SM G657A LSZH 9: 0.9mm 4: Duplex pigtail (separately) 5: APC-PC 5: MU 5: MU
5: Duplex patchcord (separately) 6: MT-RJ(F) 6: MT-RJ(F)
7: MT-RJ(M) 7: MT-RJ(M)
8: MTP(F) 8: MTP(F)
9: E2000 9: E2000
A: FSMA A: FSMA
B: MTP(M) B: MTP(M)
C: ESCON C: ESCON
D: SCDC D: SCDC
E: DIN E: DIN
OPTICAL FIbER PATCH CORd
Netop fiber optic patchcord and pigtails, in simplex, duplex or other customized forms are mainly used to link up patch panels and to interconnect the work outlets. Netop supplies all industry-standard connector and cable assemblies which comply with and tested to TIA/IEC standards. The products are 100% tested and individually packed.
Special Patch Cord & Pigtail
Product Overview
Netop id Fiber Type Diameter Product Type Interface A Interface B Unit LengthN-SPC- X X X X X X XXX
A: G.652D A: 2.0mm armorerd cable 1: Pigtail 0: Null 0: Null M: Meter XX.X meter
B: G.657A B: 3.0mm armorerd cable 2: Patchcord 1: SC/APC 1: SC/APC F: Feet XX.X feet
C: G.657B C: 4.0mm Ultru-flexible cable 2: SC/UPC 2: SC/UPC
D: Figure-'8' drop cable 3: LC/APC 3: LC/APC
E: Figure-'8' aerial drop cable 4: LC/UPC 4: LC/UPC
5: FC/APC 5: FC/APC
6: FC/UPC 6: FC/UPC
70
Net
op F
TTx-
OD
N T
echn
olog
ies
Number of fiber 1 2 2Cable Construction Simplex Duplex Mini-Zip-Cord
Cable Cross Section 2.9mm 5.8*2.9mm 1.8*3.7mm
Max. Tensile Strength 400 400 400
Max. Crush Resistance N/cm 15 30 30
Min. Bending Radius mm 30 30 30
Temperature Range
Storage -25 ~ +70
In Operation -5 ~ +70
Specification
FeatureAvailable for all common types of • connectivity systemsCable option: • 0.9mm buffered fiber 1.6-2.0mm simplex/duplex cable 3.0mm simplex/duplex cable Other cable type upon request
Fiber option: • SM G.652D, G.657A and G.657BConnector option: • LC, FC, SC, ST, MU, MT-RJ, MTPUPC & APC polishing available• OFNR, OFNP, LSZH outer sheath • available
Single Mode IL Typical IL Maximum RL Typical RL Maximum
SC; LCUltra UPC 0.20 dB 0.30 dB -55 dB -45dB
Angle APC 0.20 dB 0.30 dB -70 dB -60dB
type Outer Diameter Weight Max.Tensile Strength N Max.Crush
Resistance N/10cm Min Bending Radius
GJFJH-1 4.0mm 19Kg/KmShort term Long term short term Long term Installation Working
200 100 3000 1000 60mm 30mm
Working Temperature -20~+60
Transmission Index@1310nm @1550nm
≤ 0,38dB/Km ≤ 0,25dB/Km
Specification
Feature15mm and 7.5mm small bending radius• No permanent deformation after bending• LC comply with IEC 61754-20• SC comply with TIA/EIA 568, IEC 874-10• The insertion loss test acc.to IEC 61300-3-4• The return loss test acc.to IEC 61300-3-6• SC/UPC and SC/APC connector available•
Optical Fiber Patch Cord / Pigtail
Ultra-flexible patch cord
OPTICAL FIbER AdAPTER ANd CONNECTOR
The fiber-optic couplers are used to link fiber-optic connectors terminated on a fiber-optic cable and are usually mounted in 19” patch panels and fiber face box. Netop couplers provide a saving through low insertion loss interconnection because the fiber is precisely aligned by a ceramic sleeve. The metal body ST- and SC-couplers guarantee a high mechanical long-term stability and reproducible mating. The Small-Form-Factor LC and MT-RJ-coupler enable an increase of density by 100% through interconnecting two fibers provided by the referring MT-RJ and LC-duplex connector.
Product Overview3
72
Net
op F
TTx-
OD
N T
echn
olog
ies
FeatureFC specification according to IEC60874-7 • Twist protection pin • End face geometry ferrule: convex • Materials: • Ferrule: zirconia ceramic Connector body: brass, nickel plated
FeatureComply with international standards • Low coupling loss • Single mode or multimode or both • Metal or plastic housing • Bronze or ceramic alignment sleeves • Simplex or duplex • Flange-less or w/ flange • Hybrids•
SpecificationAdapter C-sleeve material: • CeramicColor rule for composite plastic adapter: • Blue: SM, Beige: MM, Green: SM APCInstallation: • With or without mounting flange/ square or D-D mounting flangeInsertion loss: • <= 0.2dB against reference connectorsOperating temperature: • -40℃ ~ +75℃
Optical Fiber Adapter
FeatureEN 50173 recommended connector • With push-pull-locking mechanism • SC specification according to TIA/EIA 568 AND IEC874-14• Materials: • Ferrule: zirconia ceramic Connector body: composite plastic
SpecificationInsertion loss (typical): 0.20dB• Fiber types: G62.5/125um, G50/125um,E9/125um • Cable adaption: 0.9mm, 2.0mm, 2.9mm • Other cable adaptions upon request•
SpecificationInsertion loss (typical): 0.20dB• Fiber types: G62.5/125um, G50/125um,E9/125um • Cable adaption: 0.9mm, 2.0mm, 2.9mm • Other cable adaptions upon request•
SC Fiber Optic Connector FC Fiber Optic Connector
Fiber Optic Connector
73
Netop FTTx-O
DN
Technologies
FeatureSmall form factor connectivity system, high end cabling for telecomand LAN, within single-mode application• Materials: • Ferrule: zirconia ceramic, diameter 1.25mm Connector body: composite plastic
SpecificationInsertion loss (typical) : 0.1dB• Cable adaption: • 0.9mm buffered fiber 1.6 ~ 2.0mm simplex/duplex cable 2.9mm simplex/duplex cable Other cable adaptions upon request• Other fiber optic connector•
LC Fiber Optic Connector
Other Connector Can Be Provided upon Request.
FC Fiber Optic Connector
74
Net
op F
TTx-
OD
N T
echn
olog
ies
NETOP SERVICENetop offers professional services that improve network design, reliability, scalability and efficiency.
Our service core competences include:Network optimization • Technical consultation • Customized product design • Installation & commissioning • Onsite training & supervision • System troubleshooting• After-sales services•
In addition, we also offer professional training, technical support and workshops for distributors and agents. We are committed to offering our services in anyway, anywhere and at anytime.
Netop is much more than just a supplier – Netop is a valued development partner and we will strive to devote all effort to meet new challenges in order to scale to new heights.
75
Netop FTTx-O
DN
Technologies
Netop Technology Co., Ltd.B2, No. 303, Xinke Road, QingpuIndustrial Zone, Shanghai, ChinaPost Code: 201707Tel: (+8621) 69214567Fax: (+8621) 69214018www.netop-technology.com
Product Specifications N-10xabc-1A 3HU Fiber Optic Splice Panel
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 1 of 3 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H103410JS023NT-
TQ23
3_R
07/4
.0
Features
Suit for all common types of factory or on-site assembled OF cables
with excellent performance and easy installation
High reliability, High flexibility, High integrated design
Integration cable management panel, easy to support and fix fiber
optic cables
Modular design, detachable front plate, with good versatility
Simultaneity satisfies 9 indoor or outdoor cable entry by using new
cable entry structure Applications
ISO / IEC 8802-3:FOIRL
ISO / IEC 8802-3:10BASE-FL, FP & FB
ISO / IEC TR 11802-4: 4 & 16 Mbit/s Token Ring
ISO / IEC 8802-5t: 100 Mbit/s Token Ring
ISO / IEC 8802-12: Demand Priority
ATM at 52Mbit/s
ATM at 155Mbit/s
ATM at 622Mbit/s
DIS 14165-111:Fibre Channel (FC-PH) at 133 Mbit/s
DIS 14165-111:Fibre Channel (FC-PH) at 266 Mbit/s
DIS 14165-111:Fibre Channel (FC-PH) at 531 Mbit/s
DIS 14165-111:Fibre Channel (FC-PH) at 1062 Mbit/s
ISO / IEC 8802-3:1000BASE-SX
ISO / IEC 8802-3: 1000BASE-LX
ISO / IEC 9314-9:FDDI LCF-PMD
ISO / IEC 9314-4:FDDI SMF-PMD
EN ISO / IEC 9314-3: FDDI PMD
ISO / IEC 8802-3: 100BASE-FX
IEEE 802.3: 10GBASE-LX4
IEEE 802.3: 10GBASE-ER/EW
IEEE 802.3: 10GBASE-SR/SW
IEEE 802.3: 10GBASE-LR/LW
Specifications
Dimensions:
3HU Fixed Splice Panel 520 x 400 x 3HU
3HU Sliding Splice Panel 520 x 400 x 3HU
Twist secure supports for max. 8 splice cassettes
Simultaneity satisfies for 9 cables clamping
Inputs cables protected by soft plastic bellows
Replaceable front plate, easy for various of adaptors
Support up to 96 fibers for FC, ST simplex adaptors
Support up to 96 fibers for SC simplex adaptors
Support up to 96 fibers for SC duplex adaptors
Support up to 192 fibers for LC duplex adaptors
Support up to 96 fibers for DIN simplex adaptors
Product Specifications N-10xabc-1A 3HU Fiber Optic Splice Panel
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 2 of 3 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H103410JS023NT-
TQ23
3_R
07/4
.0
Outline Drawing
Label panel
Replaceable front plate
Cable management panel
19" Frame mounting hole
Cable fixed panel
Cable entrance
Product Specifications N-10xabc-1A 3HU Fiber Optic Splice Panel
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Page 3 of 3 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
H103410JS023NT-
TQ23
3_R
07/4
.0
Ordering Information Fixed Splice Panel
Examples
N-10A574-1A 3 HU Fixed Splice Panel, SC/SC Duplex SM, 32 Fibers, Beige
N-10A5D4-1A 3 HU Fixed Splice Panel, SC/SC Duplex SM, 36 Fibers, Beige
N-10A5G4-1A 3 HU Fixed Splice Panel, SC/SC Duplex SM, 64 Fibers, Beige
N-10A5E4-1A 3 HU Fixed Splice Panel, SC/SC Duplex SM, 72 Fibers, Beige
N-10A5F4-1A 3 HU Fixed Splice Panel, SC/SC Duplex SM, 96 Fibers, Beige
Sliding Splice Panel
Examples
N-10G574-1A 3 HU Sliding Splice Panel, SC/SC Duplex SM, 32 Fibers, Beige
N-10G5D4-1A 3 HU Sliding Splice Panel, SC/SC Duplex SM, 36 Fibers, Beige
N-10G5G4-1A 3 HU Sliding Splice Panel, SC/SC Duplex SM, 64 Fibers, Beige
N-10G5E4-1A 3 HU Sliding Splice Panel, SC/SC Duplex SM, 72 Fibers, Beige
N-10G5F4-1A 3 HU Sliding Splice Panel, SC/SC Duplex SM, 96 Fibers, Beige Part Number: N-10xabc-1A
N- x-Height A:3HU Fixed Splice Panel; B:3HU Modular Splice Panel; G: 3HU sliding splice panel;
a-Adaptor
1: SC/SC simplex SM, 2: ST/ST simplex SM, 3: ST/ST Duplex SM, 4: SC/SC simplex MM,
5: SC/SC Duplex SM,6: SC/SC Duplex MM, 7: SC/ST Duplex SM, 8: SC/ST Duplex MM,
9: ESCON/ST MM, A: MT-RJ/MT-RJ SM, B: MT-RJ/MT-RJ MM, C: LC/LC Duplex SM,
D: LC/LC Duplex MM, E FC/FC simplex, F: Blank, G: SC/APC simplex; H: DIN/DIN;
K: E2000/APC; L: MPO/MPO
b-Fibers 4: 48 Fibers, 7: 32 Fibers; D: 36 Fibers. E: 72 Fibers. F: 96 Fibers. G: 64 Fibers;
c-Color 0: Metal, 2: Grey, 3: White, 4: Beige, 5: Black
1A-Meterial 1A: Steel body & front plate
Product Specifications N-10xabc-d Swing Splice Fiber Optic Panel
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 1 of 3 H103410CP024
Main Features
Integration cable management panel, easy to support and fix fiber optic cables
Changeable adaptor panel (FC, SC, LC)
Modular design, detachable front plate, has good versatility
Simultaneity satisfies 36 fibers or 48 fibers outdoor cable
entry by using new cable entry structure
Swing structure is better protected in coming cable and
out-going cable
Application
FTTH
Central office
Broadband fiber-optics network
Technical Performance
The outer shape of CPL (Center Patching Location) patch panel complies with standard 19” Integration cable
management panel, easy to support and fix fiber optic cables
Beige powder coating for CPL patch panel meets RoHS requirements
Storage temperature:-40℃~+70℃
Operation temperature: -20℃~+60℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70kPa~106kPa
NT-
TQ23
3_R
07/4
.0
Product Specifications N-10xabc-d Swing Splice Fiber Optic Panel
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 2 of 3 H103410CP024
Mechanical Performance
Fixed installation with 19” EIA rack
Dimensions: 436x 310x 2HU (2HU Swing Splice panel)
Max capacity of different types:
1HU 2HU 3HU 4HU
FC, ST simplex 24 48 72 96
SC simplex 12 32 48 64
SC duplex 24 64 96 128
LC duplex/MT-RJ 48 96 144 192
DIN simplex 24 64 96 128
Outline Drawing
NT-
TQ23
3_R
07/4
.0
Product Specifications N-10xabc-d Swing Splice Fiber Optic Panel
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 3 of 3 H103410CP024
Part Number Options:
x-Height K:1HU Swing Splice panel; L:2HU Swing Splice Panel; M:3HU Swing Splice Panel;
N:4HU Swing Splice Panel
a-Adaptor
1: SC/SC simplex SM, 2: ST/ST simplex SM, 3: ST/ST Duplex SM, 4: SC/SC simplex MM, 5: SC/SC
Duplex SM,6: SC/SC Duplex MM, 7: SC/ST Duplex SM, 8: SC/ST Duplex MM, 9: ESCON/ST MM,
A: MT-RJ/MT-RJ SM, B: MT-RJ/MT-RJ MM, C: LC/LC Duplex SM, D: LC/LC Duplex MM, E FC/FC
simplex, F: Blank, G: SC/APC simplex; H: DIN/DIN; K: E2000/APC; L: MPO/MPO
b-Fibers
1: 0 Fiber, 2: 12 Fibers, 3: 24 Fibers, 4: 48 Fibers, 6: 8 Fibers, 7: 32 Fibers, 8: 4 Fibers,
C: 6 Fibers; D: 36 Fibers. E: 72 Fibers. F: 96 Fibers. G: 64 Fibers. H: 144 Fibers.
c-Color 0: Metal, 2: Grey, 3: White, 4: Beige, 5: Black
d-Material 1: Aluminum body & front plate, 1A: Steel body & front plate
NT-
TQ23
3_R
07/4
.0
Product Specifications Fiber Faceplate Box
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 1 of 4 NT-
TQ23
3_R
07/4
.0
H110130YW08
Fiber Optic Faceplate Box- Type A
Features
Suitable for 1-4 cores indoor drop cable
Various connector interface available
Top and bottom cable entry hold available
With hinge and lock protection
Dimension: 160mm x 96mm x 30mm
Compatible with three connection methods
Directly terminate drop cable with field installable FO connector
Connect drop cable and FO pigtail with mechanical splice kit
Connect drop cable and FO pigtail by fusion splicing
As option a 0.5 meter length Singlemode FO pigtail can be included
Installation Instruction
1 2 3 4
1. Fixing slot for fusion splice
protection tube: 2 places
2. Wall mounting hole: 4 places
3. Fiber entry hole: 2 places
4. Fiber holder: 2 places
5. Fixing slot for adapter: 2 places
3 5
Product Specifications Fiber Faceplate Box
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 2 of 4 NT-
TQ23
3_R
07/4
.0
H110130YW08
Fiber Optic Faceplate Box- Type B
Features
Suitable for 1-4 cores indoor drop cable
Various interface available
Rear and bottom cable entry hold available
Dimension: 86mm x 86mm x 27.5mm
Compatible with three connect methods
Directly connect drop cable with field installable FO connector
Connect drop cable and FO pigtail with mechanical splice kit
Connect drop cable and FO pigtail by fusion splicing
As option a 0.5 meter length Singlemode FO pigtail can be included
Installation Instruction
Product Specifications Fiber Faceplate Box
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 3 of 4 NT-
TQ23
3_R
07/4
.0
H110130YW08
Fiber Optic Faceplate Box- Type C
Features
Suitable for 1-2 cores indoor drop cable and various FO interfaces
available. With exchangeable port adapter, clear concise labeling
makes 45 degree faceplates more flexible and professional, together
with attached mounting screws, individual package and standard beige
color provide you the excellent solution for the working area.
Fiber Optic Faceplate Box- Type D
Features
Suitable for 1-4 cores indoor drop cable
Various interface available
Dimension: 150mm x 30mm x 110mm
Compatible with three connect methods
Directly connect drop cable with field installable FO connector
Connect drop cable and FO pigtail with mechanical splice kit
Connect drop cable and FO pigtail by fusion splicing
As option a 0.5 meter length Singlemode FO pigtail can be included
Product Specifications Fiber Faceplate Box
Netop Technology Co., Ltd. No. 303, XinKe Rd, Qingpu Industrial Zone, Shanghai, China P.C.: 201707 Tel: +86 21 6921 4567 Fax: +86 21 6921 3655 www.netop-technology.com
Your Partner For Network Optimization
Page 4 of 4 NT-
TQ23
3_R
07/4
.0
H110130YW08
Ordering Information
Adapter Type Connectivity Ports Pigtail Type Series
N-FFB- X X X X
0: Without adapter 0: Null 0: without pigtail A: A Type
1: SC/APC simplex 1: 1 port and 1 pigtail 1: Φ2.0mm, G.652D pigtail B: B Type
2: SC/UPC simplex 2: 2 ports and 2 pigtails 2: Φ2.0mm, G.657A pigtail C: C Type
3: LC/APC duplex 4: 4 ports and 4 pigtails 3: Φ0.9mm, G.652D pigtail D: D Type
4: LC/UPC duplex 4: Φ0.9mm, G.657A pigtail
Customized