Architectural Fittings & Components

product focus

NEWCable Railing Range

Architectural Fittings & Componentsproduct focus

Slim, sleek & sophisticated. Finally a cable railing system that not only works well and is easy to install, but looks great too! A cable system that is designed specifically for balustrading, not adapted from marine rigging. Cable connections & tensioning devices can be hidden within the posts. Swageless fitting for easy installation. Good idea? We think so. White Metal are pleased to announce that we have been selected as UK distributor for Ultra-Tec Cable Railing Systems…..

Clevis AdjusterA small ferrule is swaged to the cable to provide an attachment to this unique tensioner. Ideal for use on stairs or ramps.

Clevis EndShaped to match the Clevis Adjuster, the Clevis End provides a cost effective fixed end.

Recently completed work - Elliott Street Bridge

Hanger Bolt AdjusterAs per the Clevis Adjuster, however can be mounted directly into wood ,concrete or metal on level runs.

Eye AdjusterSimilar to the Clevis Adjuster, however offering an eye in place of the clevis – the eye is tapped to M6, so can be bolted directly to pre-welded lugs.

ACCESSORIES

DID YOU KNOW

Hidden AdjusterA male threaded stud is swaged to the cable to provide this totally hidden tensioning device. Simply insert the Hidden Adjuster into a pre-drilled hole in the end post and rotate with an allen key to the required tension!

Hidden EndUsed in conjunction with the Hidden Adjuster, this fitting is also hidden inside the end post. Swaged directly onto the cable, this is the most economical way to achieve a non-adjustable end. Once installed it looks identical to the Hidden Adjuster.

No more Unsightly Rigging

Screws!

Cable can be cut and swaged to your

requirements

We also stock a range of Balustrade fittingsDID YOU

KNOW

7-9 Cooke RoadLowestoft Suffolk NR33 7NA

t 0845 108 7770f 0845 108 7771

e sales@whitemetal.co.uk

www.whitemetal.co.ukArchitectural Fittings & Components

pRODUCt fOCUS 0411

push & pull-Lock fittingsCables no longer need to be pre-cut to the exact length! Simply insert the cable into the fitting by hand, pull through the excess cable & cut off! Place the stainless cap in place to complete. Or alternatively use a Push-Lock terminal that doesn’t allow the cable to pass all the way through.

push-Lock with EyeFor cables to stairs or ramps – push onto the end of the cable and you’re away , it is that simple!

push-Lock with StudAs per the Push-Lock fitting, however this fitting comes complete with a male threaded section. When used with a Hidden Adjuster it is the perfect solution for a swageless tensioning device!

Swageless push & pull-Lock fittingsfittings attach directly to the cable by hand. No special tools required!

Call 0845 108 7770 For Further Details

PUSH... ...LOCK

COUNTERBORED FOR PIPE