www.veko.com www.veko.com IP65 72.1 mm PROFILE PWR-05500-B The profile type PWR-05500-B is the perfect fit for use in rooms with stringent requirements for protection against water and dust ingress. For example, swimming pools, damp industrial areas or areas for processing foodstuffs. Veko supplies the profile with 7 + 3 x 2.5 mm² or 7 + 2 x 3 x 2.5 mm² flat cable, suspension brackets, connecting pieces and end partitions. It is also possible to integrate 2 light groups in 1 flat cable, for example for emergency lighting. By using aluminium, it is almost unnecessary to align the light line: only 2 suspension points are needed per line section. As the luminaires and covers have already been installed in the profiles, Veko supplies these coded and almost without packaging. Therefore, the profile can be assembled and disassembled very quickly. Veko’s unique coupling system means it can be reused many times without any problems. Measurements Accessories for assembly Initial power feed PWR-05500-B IP65 Order code • Aluminium profile with plastic inlay B-PS65-CG-05500-B IP65 • Supplied complete, including glands, connectors and connecting piece K6-R (2-part) • Length: 230 mm Initial power feed PWR-05500-B IP65 Order code • Aluminium profile with plastic inlay B-PS65-05500-B IP65 • 4 possible Wieland combinations, 1 x 5-pole, 1 x 2-pole (DALI), 2 x 3-pole • Initial power feed has Wieland Male connection • Length: 230 mm Technical information Material Untreated extruded aluminium Length A multiple of the luminaire Number of luminaire places 2 or 3 Anodized On request RAL colours On request Halogen free flat cables On request Special measurements On request, up to 6 m Technical data subject to change. Profiles - EN v1.3 24/03/19 69.5 mm 73.7 mm
The information hereon is the property of Veko Lightsystems B.V and/or its subsidiaries. Without written permission, any copying, transmittal to others, and any use except that for wich it is loaned is prohibited.
Title:
- Aluminium extrusion profiles: NEN-EN 755-9- Thermoplastics extruded profiles: DIN 16941- Plastics mouldings: DIN 16901 Revision:
Surface Finish:
General Tolerances unless otherwise specified: Date:Chk'd:
Appv'd: Date:
C1
20-8-2018thomas.simon
72.1
mm
PROFILE PWR-05500-B
The profile type PWR-05500-B is the perfect fit for use in rooms with stringent requirements for protection against water and dust ingress. For example, swimming pools, damp industrial areas or areas for processing foodstuffs. Veko supplies the profile with 7 + 3 x 2.5 mm² or 7 + 2 x 3 x 2.5 mm² flat cable, suspension brackets, connecting pieces and end partitions. It is also possible to integrate 2 light groups in 1 flat cable, for example for emergency lighting.
By using aluminium, it is almost unnecessary to align the light line: only 2 suspension points are needed per line section. As the luminaires and covers have already been installed in the profiles, Veko supplies these coded and almost without packaging. Therefore, the profile can be assembled and disassembled very quickly. Veko’s unique coupling system means it can be reused many times without any problems.
Measurements
Accessories for assembly
Initial power feed PWR-05500-B IP65 Order code
• Aluminium profile with plastic inlay B-PS65-CG-05500-B IP65
• Supplied complete, including glands, connectors and connecting piece K6-R
(2-part)
• Length: 230 mm
Initial power feed PWR-05500-B IP65 Order code
• Aluminium profile with plastic inlay B-PS65-05500-B IP65
• 4 possible Wieland combinations, 1 x 5-pole, 1 x 2-pole (DALI), 2 x 3-pole
• Initial power feed has Wieland Male connection
• Length: 230 mm
Technical information
Material Untreated extruded aluminium
Length A multiple of the luminaire
Number of luminaire places 2 or 3
Anodized On request
RAL colours On request
Halogen free flat cables On request
Special measurements On request, up to 6 m
Technical data subject to change.
Profi
les
- EN
v1.
3 24
/03/
19
69.5 mm
73.7
mm
www.veko.com
IP65
www.veko.com
PROFILE PWR-05500-B
Accessories for assembly Wieland central power feed PWR-05500-B IP65 Order code
• Aluminium profile with plastic inlay C-PS65-CG-05500-B IP65
• 4 possible Wieland combinations, 1 x 5-pole, 1 x 2-pole (DALI), 2 x 3-pole
• Central power feed has Wieland Male connection
• Length: 460 mm
Wieland central power feed PWR-05500-B IP20/IP40/IP54 Order code
• Aluminium profile with plastic inlay C-PS65-05500-B IP65
• 4 possible Wieland combinations, 2 x 5-pole, 1 x 2-pole (DALI), 4 x 3-pole
• Central power feed has Wieland Male connection
• Length: 460 mm
Wieland end power feed PWR-05500-B IP65 Order code
• Aluminium profile with plastic inlay E-PS65-05500-B IP65
• 4 possible Wieland combinations, 1 x 5-pole, 1 x 2-pole (DALI), 2 x 3-pole
• End power feed has Wieland Female connection
• Length: 230 mm
Connecting piece PWR-5500-B IP65 Order code
• Used when coupling line sections K3R
K3R-300• Included in the price
• With spans between 2 and 4 metres, an extended connecting piece K6-R/300
must be used, which can be supplied at an additional cost
The information hereon is the property of Veko Lightsystems B.V and/or its subsidiaries. Without written permission, any copying, transmittal to others, and any use except that for wich it is loaned is prohibited.
Title:
- Aluminium extrusion profiles: NEN-EN 755-9- Thermoplastics extruded profiles: DIN 16941- Plastics mouldings: DIN 16901 Revision:
Surface Finish:
General Tolerances unless otherwise specified: Date:Chk'd:
The information hereon is the property of Veko Lightsystems B.V and/or its subsidiaries. Without written permission, any copying, transmittal to others, and any use except that for wich it is loaned is prohibited.
Title:
- Aluminium extrusion profiles: NEN-EN 755-9- Thermoplastics extruded profiles: DIN 16941- Plastics mouldings: DIN 16901 Revision:
Surface Finish:
General Tolerances unless otherwise specified: Date:Chk'd:
The information hereon is the property of Veko Lightsystems B.V and/or its subsidiaries. Without written permission, any copying, transmittal to others, and any use except that for wich it is loaned is prohibited.
Title:
- Aluminium extrusion profiles: NEN-EN 755-9- Thermoplastics extruded profiles: DIN 16941- Plastics mouldings: DIN 16901 Revision:
Surface Finish:
General Tolerances unless otherwise specified: Date:Chk'd:
The information hereon is the property of Veko Lightsystems B.V and/or its subsidiaries. Without written permission, any copying, transmittal to others, and any use except that for wich it is loaned is prohibited.
Title:
- Aluminium extrusion profiles: NEN-EN 755-9- Thermoplastics extruded profiles: DIN 16941- Plastics mouldings: DIN 16901 Revision:
Surface Finish:
General Tolerances unless otherwise specified: Date:Chk'd:
The information hereon is the property of Veko Lightsystems B.V and/or its subsidiaries. Without written permission, any copying, transmittal to others, and any use except that for wich it is loaned is prohibited.
Title:
- Aluminium extrusion profiles: NEN-EN 755-9- Thermoplastics extruded profiles: DIN 16941- Plastics mouldings: DIN 16901 Revision:
Surface Finish:
General Tolerances unless otherwise specified: Date:Chk'd:
The information hereon is the property of Veko Lightsystems B.V and/or its subsidiaries. Without written permission, any copying, transmittal to others, and any use except that for wich it is loaned is prohibited.
Title:
- Aluminium extrusion profiles: NEN-EN 755-9- Thermoplastics extruded profiles: DIN 16941- Plastics mouldings: DIN 16901 Revision:
Surface Finish:
General Tolerances unless otherwise specified: Date:Chk'd:
Appv'd: Date:
C1
thomas.simon 20-8-2018
PROFILE PWR-05500-B
Installation brackets
Suspension bracketchain*
Suspension bracketwire-end stud**
Suspension bracketwire-end stud**
* Standard suspension brackets included in the price.** Steel wire suspension brackets supplied with steel wire in lengths of 1, 2, 3 and 5 metres.
