Date post: | 19-Jan-2018 |
Category: |
Documents |
Upload: | maud-atkins |
View: | 217 times |
Download: | 0 times |
PSB Injection Overview + Specification changesABT LIU Project Review 2015
20-11-2015
Wim Weterings
ABT components and related elements(Small reminder)
Vertical Septum BI.SMVBeam slices are further
deflected by BI.SMV septa into the BI.BVT vertical dipole
to achieve the required booster beam level
separation of 360mm between each ring.
Proton Distributor BI.DISSystem of pulsed magnets, which kick slices of the 160 MeV H- beam from LINAC4
to different vertical positions at the vertical
septum BI.SMV.
H- Charge-Exchange SystemThe beam is injected through a graphite stripping foil BI.STR to convert ~98% of the beam to H+,
using 4 magnets BI.BSW creating the injection bump and a 4 horizontal kickers KSW, outside
the injection region, producing the painting bump.
PSB Injection Region
Related Control systems for all Equipment
ABT components and related elements(Small reminder)
Vertical Septum BI.SMVBeam slices are further
deflected by BI.SMV septa into the BI.BVT vertical dipole
to achieve the required booster beam level
separation of 360mm between each ring.
Proton Distributor BI.DISSystem of pulsed magnets, which kick slices of the 160 MeV H- beam from LINAC4
to different vertical positions at the vertical
septum BI.SMV.
H- Charge-Exchange SystemThe beam is injected through a graphite stripping foil BI.STR to convert ~98% of the beam to H+,
using 4 magnets BI.BSW creating the injection bump and a 4 horizontal kickers KSW, outside
the injection region, producing the painting bump.
PSB Injection Region
Related Control systems for all Equipment
Luc ThierryRemy
CedricLuis
Roger & Gregor
Chiara: Beam dynamics
BI line and Injection region
KSW
BI Line
Injection Region
New Injection Region design For each ring:• 4 BSW chicane magnets• Undulated Inconel
vacuum chambers• 4 Ion pumps• BTV with Camera• Stripping foil unit• Vacuum sectorisation• Beam loss monitors• Internal H0H- dump
Planning
Wim Weterings, LIU 2013, April 12, 2013
LIU-PSB timeline for H- injection agreed by the
LIU project.77th IEFC meeting
INDICO event 212744
Stripping foil Test Stand installation Q1 2015
Half Sector Test
Stripping foil Test Stand installation Q1 2016
Building 355Mock-up assembly
Foil lab space near the PSB
Ghislain Roy has found lab space in building 37 that BE can loan to TE/ABT for a few years (up to LS2).
Office 37/R-023
List of all LIU-PSB specificationsList of all LIU-PSB specifications, make sure available and in EDMS Tony
INDICO 357135, ABT LIU project review follow up 10-12-2014
Updated list of all LIU-PSB specifications
NewNew
NewNew
New
New
TDR
TDR
TDR
TDR
TDR
Nearly completed PSB-MSMIB-EC-0001
TotalSchedule Variance
Planned Value
Earned Value
Actual Cost
Total Planned Value
65730 LIU-PSB - injection distributor (BI.DIS) 0 562000 562000 437743 562000
65731 LIU-PSB injection septum (BI.SMV) -157290 1197390 1040100 1143310 1264000
65732 LIU-PSB H- injection stripping foil unit -227905 328546 100641 263273 468000
65733 LIU-PSB Injection Zone Support Structure -85586 161699 76113 105510 242000
65734 LIU-PSB - injection distributor pulse generator (BI.DIS) -371995 1593290 1221295 910653 2255000
65735 LIU-PSB injection bumpers (BI.BS) -863873 1263147 399274 448356 2127000
65736 LIU-PSB - PSB injection painting bumpers (BI.KSW) -30449 331182 300732 334428 346000
65737 LIU-PSB injection kicker electronics & controls -93038 161038 68000 30548 414000
65738 LIU-PSB injection septa electronics & controls -20724 28724 8000 4571 125000
65739 LIU-PSB - injection stripping foil & absorber blocks E+C -46938 134938 88000 39585 266000
65740 LIU-PSB injection paint bump (BI.KSW) electr. & contr. -31093 137093 106000 88661 601000
LIU-PSB 9.2 Total -1928892 5899048 3970156 3812175 8670000
Nov-15
THANK YOU FOR YOUR ATTENTION!