Turn
in
g Your
Assets into Dollars
Public AuctionEQUIPME
NT
LIQUID
ATION
EVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
301 Post Office Drive, Suite CIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
Asset Sales (Canada) Inc.4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z 1L5Tel 902.852.5331 Fax 704.821.4325
EQUIPMENT LIQUIDATION
PLANO MACHINE & INSTRUMENT INC.LATE MODEL CNC & MANUAL MACHINES
4807 E. Hwy 82 - Gainesville, TX 76240 THURSDAY, OCTOBER 6TH @ 10:00 A.M. CDT
Inspection: Monday, October 3rd - Wednesday, October 5th, From 8:00 A.M. - 4:00 P.M. CDT
MAZAK QTN-400IIM CNC TURNING CENTER
MAZAK NEXUS HCN 6800-II 4-AXIS CNC HORIZONTAL MACHINING CENTER
(4) KITAMURA HX630i 4-AXIS CNC HORIZONTAL MACHINING CENTERS
LEADWELL MCV-1500i 5-AXIS (4+1) VERTICAL MACHINING CENTER
20122010
2008 20114AVAIL.
105214_Plano.indd 1 8/17/16 1:47 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, OCTOBER 3RD - WEDNESDAY, OCTOBER 5TH FROM 8:00 A.M. - 4:00 P.M. CDT
2
(5) CNC HORIZONTAL MACHINING CENTERS(4) KITAMURA Model HX630i 4-Axis (2 wired for 5-Axis) CNC Horizontal Machining Centers with (2) 24.75” Pallets, .001° 4th Axis, 39” X-Axis Travel, 31” Y-Axis, 32” Z-Axis, #50 Taper Spindle Speed to 12,000 RPM, 50 Position ATC, Thru-Spindle Coolant, Fanuc 16iMB CNC Controls, sn:45381 (wired for 5th Axis), mfg.2011 ● sn:45404, mfg.2011 ● sn:45408, mfg.2011 ● sn:45369 (wired for 5th Axis), mfg.2011
(2) KOMA 12” Diameter 4th Axis Model RBA320K(used in conjunction for 5th), sn:101097 ● sn:100035
MAZAK NEXUS Model HCN 6800-II 4-Axis CNC Horizontal Machining Center with (2) 24” x 24” Pallets, .001° 4th Axis, 41” X-Axis Travel, 35” Y-Axis, 38” Z-Axis, #50 Taper Spindle Speeds to 10,000 RPM, 120 Position ATC, Hi-Pressure Thru-Spindle Coolant, Renishaw Probing, Matrix Nexus CNC Control, sn:223727, mfg.11/2010, Installed New 2011
(4) KITAMURA HX630i 4-AXIS (1 WIRED FOR 5-AXIS) CNC HORIZONTAL MACHINING CENTERS
MAZAK NEXUS HCN6800-II 4-AXIS CNC HORIZONTAL MACHINING CENTER
2011
2011
(2) KOMA 12" DIAMETER 4TH AXIS & TOOLING
4AVAIL.
105214_Plano.indd 2 8/17/16 1:47 PM
AUCTION SALE DATE & TIME – THURSDAY, OCTOBER 6TH @ 10:00 A.M. CDT
3
LEADWELL MCV-1500i 5-AXIS (4+1) VERTICAL MACHINING CENTER
5 AXIS VERTICAL MACHINING CENTERLEADWELL Model MCV-1500i 5-Axis (4 + 1) Vertical Machining Center with 30” x 50” Worktable, 20” Diameter Rotary Trunnion with 8” Thru-Hole, 50” X-Axis Travel, 29” Y-Axis, 28” Z-Axis, #50 Taper Spindle Speeds to 10,000 RPM, 30 Position Side Head ATC, Fanuc Series Oi-MD CNC Control, Approximately 500 Run Hours, sn:L2TAA0328, mfg.2012, Installed New 7/2013
(5) VERTICAL MACHINING CENTERSLEADWELL Model V80i 4-Axis CNC Vertical Machining Center with 39” x 83” Worktable, 80.25” X-Axis Travel, 39.2” Y-Axis, 28.37” Z-Axis, #50 Taper Spindle Speeds to 12,000 RPM, 30 Position ATC, Thru-Spindle Coolant, Fanuc OiMC CNC Control & Chip Conveyor, 15” 4th Axis Rotary Table (may be sold separate), sn:L2TJD0905, mfg.2008
(2) LEADWELL Model MV-40 4-Axis CNC Vertical Machining Centers with 20” x 47” Tables, 40” X-Axis Travel, 20” Y-Axis, 20” Z-Axis, #40 Taper Spindle Speed to 12,000 RPM, 24 Position ATC, Thru-Spindle Coolant, Fanuc 18i-MB/Oi CNC Controls & Chip Conveyors, 10” 4th Axis Rotary Table (may be sold separate), sn:L2TJD0905, mfg.2006 ● sn:L2TJD0906, mfg.2006
LEADWELL Model V-40 4-Axis CNC Vertical Machining Centers with 20” x 47” Tables, 40” X-Axis Travel, 20” Y-Axis, 20” Z-Axis, #40 Taper Spindle Speed to 10,000 RPM, 24 Position ATC, Thru-Spindle Coolant, Fanuc 18i-MB/Oi CNC Controls & Chip Conveyors, 10” 4th Axis Rotary Tables (may be sold separate), sn: L2TJE0301, mfg.2005
LEBLOND MAKINO Model FNC-128 Heavy Duty CNC Vertical Machining Center with 70” x 31” Worktable, 49” X-Axis Travel, 32” Y-Axis, 27” Z-Axis, #50 Taper Spindle Speeds to 3,500 RPM, 50 Position ATC, Fanuc OM CNC Pendant Control, sn:LM3064
LEADWELL V80i 4-AXIS CNC VERTICAL MACHINING CENTER
(2) LEADWELL MV-40 4-AXIS CNC VERTICAL MACHINING CENTERS
LEBLOND MAKINO FNC-128 HEAVY DUTY CNC VERTICAL MACHINING CENTER
LEADWELL V-40 4-AXIS CNC VERTICAL MACHINING CENTER
2012
2008
2006
20052AVAIL.
105214_Plano.indd 3 8/17/16 1:47 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, OCTOBER 3RD - WEDNESDAY, OCTOBER 5TH FROM 8:00 A.M. - 4:00 P.M. CDT
4
(2) HIGH SPEED TAPPING / MILLING CENTERS
(2) FANUC RoboDrill Mate CNC High Speed Tapping & Milling Centers with 16” x 25-1/2” Worktables, 16” X-Axis Travel, 12” Y-Axis, 13” Z-Axis, #30 Taper Spindle Speeds to 10,000 RPM, 14 Position ATC, Full Enclosure, Fanuc Series OiMC CNC Controls, sn:P06VN134, mfg.12/2006 ● sn:PO6VN135, mfg.12/2006, Both Installed NEW 2007
LARGE CAPACITY CNC TURNING CENTERSLEADWELL Model LTC-35DXXL CNC Turning Center with 21” 3-Jaw Hydraulic Chuck x 122” Maximum Distance to Tailstock, 31.5” Maximum Swing, 23.6" Maximum Turning Diameter, Spindle Speeds to 2,000 RPM, 12 Position Turret, Chip Conveyor, Fanuc OiTD CNC Control, sn:L2TAA0482, mfg.2012
(2) LEADWELL Model LTC-50CL CNC Turning Centers with 21” 3-Jaw Power Chucks x 78” Maximum Turning Length, 40” Maximum Swing, Spindle Speeds to 15,000 RPM, 12 Position Turrets, Chip Conveyors, Fanuc Oi-TD CNC Controls, sn:L2TAA0131, mfg.2012 ● sn:L2TAJ0996, mfg.2011
DMG ECO 210 MICROSET TOOL PRESETTER
(2) FANUC ROBODRILL MATE CNC HIGH SPEED TAPPING & MILLING CENTERS
2006
LEADWELL LTC-35DXXL CNC TURNING CENTER
LEADWELL LTC-50CL CNC TURNING CENTERS
TOOL PRESETTER & ACCESSORIES
DMG ECO 210 Microset Computerized Tool Presetter with #40 / #50 Taper Adaptors, Computer Controls & Cabinet, sn:99510014598, mfg.2008
MARKING & ENGRAVING MACHINES
SIC Computer Parts Marking System Model E9-P62 with 4th Axis Rotary, sn:05946
TECHNIFOR Model CN200SP Engraving Machine, sn:00-10-1816
Download a lot book at www.asset-sales.com
2AVAIL.
2011
2AVAIL.
2008
2012
105214_Plano.indd 4 8/17/16 1:47 PM
AUCTION SALE DATE & TIME – THURSDAY, OCTOBER 6TH @ 10:00 A.M. CDT
5
(2) MAZAK NEXUS QTN-350-MY-II CNC TURNING CENTERS
(2) CNC TURNING CENTERS WITH Y-AXIS
(2) MAZAK Nexus Model QTN-350-MY-II CNC Turning Centers with 15” 3-Jaw Power Chucks x 60” Distance to Tailstock, 29” Maximum Swing, Spindle Speeds to 2,500 RPM, Y-Axis & Milling, 12 Position Turrets, Chip Conveyors, Mazatrol Matrix Nexus CNC Controls, sn:204910, mfg.2008 ● sn:205033, mfg.2008
(5) CNC TURNING CENTERS, MILLING
MAZAK Nexus Model QTN-400-IIM CNC Turning Center with 17-1/2” 3-Jaw Power Chuck x 80” Distance to Tailstock, 33” Maximum Swing, Spindle Speeds to 4,800 RPM, Milling, 12 Position Turret, Chip Conveyor, Mazatrol Matrix Nexus CNC Controls, sn:205143, mfg.9/2008
MAZAK Nexus Model QTN-350-II CNC Turning Center with 15” 3-Jaw Power Chuck, 60” Distance to Tailstock, 26” Maximum Swing, Spindle Speeds to 3,300 RPM, Milling, 12 Position Turret, Chip Conveyor, Matrix CNC Control, sn:240869, mfg.9/2012
MAZAK Nexus Model QTN-300-IIM CNC Turning Center with 10” 3-Jaw Power Chuck, 48” Distance to Tailstock, 29” Maximum Swing, Spindle Speeds to 4,000 RPM, Milling, 12 Position Turret, Chip Conveyor, Mazatrol Matrix Nexus CNC Control, sn:192558, mfg.9/2007
(2) MAZAK Nexus Model QTN-250-II CNC Turning Centers with 10” 3-Jaw Power Chucks, 20” Distance to Tailstocks, 24” Maximum Swing, Spindle Speed to 4,000 RPM, 12 Position Turret, Chip Conveyor, Mazatrol Matrix Nexus CNC Control, sn:248014, mfg.2013 ● sn:248040, mfg.2013
CONTINUED ON NEXT PAGE
2AVAIL.
2008
MAZAK NEXUS QTN-400-IIM CNC TURNING CENTER
MAZAK NEXUS QTN-350-II CNC TURNING CENTER
2012
Can’t Attend the Sale? Still Want to Bid? Visit Our
Website atwww.asset-sales.com
For More Bidding Options.Check Out Our Upcoming
Auction Calendar! You Can Also Sign Up to
Receive Email Notifications by Joining Our Mailing List!
2008
105214_Plano.indd 5 8/17/16 1:47 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, OCTOBER 3RD - WEDNESDAY, OCTOBER 5TH FROM 8:00 A.M. - 4:00 P.M. CDT
6
HORIZONTAL BORING MILLLUCAS Model 30T117 5” Table Type CNC 4-Axis Horizontal Boring Mill with 60” x 132” Table, 132” X-Axis Travel, 84” Y-Axis, 36” Z-Axis, 48” W-Axis, #50 Taper Spindle Speed to 1400 RPM, Allen Bradley Series 9 CNC Control with Full Edit, mfg.1980 Retro 1992
VERTICAL MILLS(3) PASMA Model TUM-20VS Vertical Knee Milling Machines with R-8 Spindle Speeds Variable to 4200 RPM, 9” x 42” Power Feed Tables, Newall 2-Axis Digital Readouts, sn:329680, mfg.1995 ● sn:329668, mfg.1995 ● sn:329704, mfg.1995
CROSS SLIDING TURRET LATHESWARNER & SWASEY #4A Model M-3350 Square Head Turret Lathe with 20” 3-Jaw Chuck, Power Wrench, 9-1/2” Thru-Hole, Cross Sliding Turret, Threading, Dual Digital Readouts, Coolant, sn:2837931
WARNER & SWASEY #3A Model M3500 Square Head Turret Lathe with 20” 3-Jaw Chuck, Power Wrench, 6” Thru-Hole, Cross Sliding Turret, Threading, Digital Readouts, Taper Attachment, Coolant, sn:3051262
WARNER & SWASEY #2A Model M-3470 Square Head Turret Lathe with 18” 3-Jaw Chuck, 4-1/2” Thru-Hole, Cross Sliding Turret, Threading, Taper Attachment, Coolant, sn:2432318MAZAK NEXUS QTN-300-IIM CNC TURNING CENTER
MAZAK NEXUS QTN-250-II CNC TURNING CENTERS
2AVAIL.
2007
(3) PASMA TUM-20VS VERTICAL KNEE MILLING MACHINES WARNER & SWASEY #4A M-3350 SQUARE HEAD TURRET LATHE
3AVAIL.
2013
CST
105214_Plano.indd 6 8/17/16 1:47 PM
AUCTION SALE DATE & TIME – THURSDAY, OCTOBER 6TH @ 10:00 A.M. CDT
7
WARNER & SWASEY #3A M3500 SQUARE HEAD TURRET LATHE WARNER & SWASEY #2A M3470 SQUARE HEAD TURRET LATHE
Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items. Buyers May Pick Up Their Items at the Auction Location or Can Arrange for a Third Party Logistics Firm to Manage the Removal Process for Them.
ENGINE LATHESMAZAK 24” x 120” Engine Lathe with 24” 4-Jaw Chuck, 4” Thru-Hole, Spindle Speeds to 12-1200 RPM, Inch/Metric Threading, Taper Attachment, Rapid Travels, Steady Rest, sn:35290W, mfg.2010
MONARCH 25” x 192” Heavy Duty Engine Lathe with 21” 4-Jaw Chuck, Spindle Speeds to 12-1500 RPM, Threading, Taper Attachment, Steady Rest, sn:47157
MONARCH 21” x 96” Heavy Duty Engine Lathe with 15” 4-Jaw Chuck, Spindle Speeds to 19-1750 RPM, Threading, Taper Attachment, Steady Rest, sn:46363
CLAUSING COLCHESTER 15” x 50” Engine Lathe with 8” 3-Jaw Chuck, Spindle Speeds to 25-2000 RPM, Inch / Metric Threading, Chip Pan, Coolant & 2-Axis Digital Readouts, sn:TG0214, mfg.2009
MAZAK 24" X 120" ENGINE LATHE
MONARCH 25" X 192" HEAVY DUTY ENGINE LATHE
2010
MONARCH 21" X 96" HEAVY DUTY ENGINE LATHE
CST CST
105214_Plano.indd 7 8/17/16 1:47 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, OCTOBER 3RD - WEDNESDAY, OCTOBER 5TH FROM 8:00 A.M. - 4:00 P.M. CDT
8
HORIZONTAL & VERTICAL BANDSAWS
HEM Model 105A Automatic Horizontal Bandsaw with 14” x 14” Capacity, 14” Rounds, Automatic Feed with Stroke to 24”, Muti-Index, Adjustable Blade Speeds, Feeds, Discharge Table, sn:388093
COSEN Model C-300NC Automatic Horizontal Bandsaw with 11.8” x 13” Capacity, 11.8” Rounds, Programmable Automatic Feed with Stroke to 24”, Adjustable Blade Speed, Feeds, Chip Auger, Discharge Table, sn:C9913752, mfg.12/2010
DO-ALL Model 2612-H Vertical Bandsaw with 24” x 30-1/2” Tilt Worktable, Variable Blade Speeds to 25-6000 RPM, Blade Welder / Grinder, sn:290-701926
HYDRAULIC PRESSDAKE 75 Ton Hydraulic Straightening Press Model 25-292 with 20” x 84” Table, sn:133624
DAKE 50 Ton H-Frame Elec-Draulic Shop Press with 32” Between Uprights, Adjustable Rail, sn:150732
PARTS WASHERBETTER ENGINEERING Parts Washer Purifier Model F3000P-ZX with 30” Diameter Table, 36” Work Height, Timer & Controls, sn:20260, mfg.2006
CARLTON 5' ARM X 11" COLUMN RADIAL ARM DRILL
MEGA ELDORADO SINGLE SPINDLE GUN DRILLMEGA MOLLART SINGLE SPINDLE GUN DRILL
CLAUSING COLCHESTER 15" X 50" ENGINE LATHE
2009
HEM 105A AUTOMATIC HORIZONTAL BANDSAWCOSEN C-300NC AUTOMATIC HORIZONTAL BANDSAW
RADIAL ARM DRILLCARLTON 5’ Arm x 11” Column Radial Arm Drill with Power Elevation & Clamping, Spindle Speeds to 30-3000 RPM, Coolant, 20” x 20” T-Slot Base, Box & Rotary Worktables, sn:1A-4430
GUN DRILLSMEGA-MOLLART 40” Single Spindle Gun Drill with Approximately 40” Stroke x 1-1/2” Drill Capacity, 20” x 24” Power Infeed Table, Mega Flo High Pressure Coolant, Chip Conveyor
MEGA-ELDORAO 20” Single Spindle Gun Drill Model M75-1049 with Approximately 20” Stroke x 1-1/2” Drill Capacity, 16” x 16” Power Cross Feeding Table, High Pressure Coolant, sn:538
2010
105214_Plano.indd 8 8/17/16 1:47 PM
AUCTION SALE DATE & TIME – THURSDAY, OCTOBER 6TH @ 10:00 A.M. CDT
9
<(3) BROWN & SHARPE TESA-HITE GAGES
>JONES & LAMSON OPTICAL
COMPARATOR
DAKE 75 TON HYDRAULIC STRAIGHTENING PRESS
ZEISS CONTURA G2RDS CNC COORDINATE MEASURING MACHINE
BETTER ENGINEERING PARTS WASHER
MISCELLANEOUS(2) INEX ZERO Bead Blast / Sand Blast Machines
BURR-BENCH Vibratory Finishing Mill
DAREX Model XT-3000 Drill Sharpener
Double End Grinders ● Cutter Master End Mill Grinder
3/4” Universal Bench Type Cutter / Grinder
HARDINGE DV59 Second OP Polishing Lathe
Huge Assortment of Tilt Hoppers ● Racking ● Cabinets ● Plant Support ● Work Benches ● Perishable Tooling ● End Mills ● Taps ● Reamers ● Drills ● Carbide ● #50 / #40 Taper Toolholders ● MT Toolholders ● Clamps ● Etc….
INSPECTIONZEISS Contura Model G2RDS CNC Coordinate Measuring Machine with 49” W x 60” L Table Capacity, M5R 6-Station Tip Changer, Zeiss Vast XXT Motorized, Multi-Axis Probe, Dual Joystick Control, PCDMIS Software & Computer
GAGEMAKER Mic Trac Super Mic & Measurement Center Model MT-3000, Mic Trac Controls & Readout, sn:MT-3024-50, mfg.2012
JONES & LAMSON Model PC-14A Optical Comparator with 16” Screen & Work Table, sn:E46308
(3) BROWN & SHARPE Tesa-Hite 700 28” Elecronic Height Gages with PLC Controls, sn:2Q341-01 ● sn:2S336-01 ● sn:2T35501
BROWN & SHARPE Micro-Hite 900 36” Electronic Height Gage with PLC Controls, sn:2D004512
BROWN & SHARPE Micro-Hite Model 3Y10JJ409
Numerous Granite Tables from 36” x 36” to 60” x 36”
GAGEMAKER MIC TRAC SUPER MIC & MEASUREMENT CENTER
DAREX XT-3000 DRILL SHARPENER
(2) INEX ZERO BEAD BLAST / SAND BLAST MACHINES
HARDINGE POLISHING LATHE
Download a lot book at www.asset-sales.com
105214_Plano.indd 9 8/17/16 1:47 PM
MACHINERY INSPECTION DATE & TIME – MONDAY, OCTOBER 3RD - WEDNESDAY, OCTOBER 5TH FROM 8:00 A.M. - 4:00 P.M. CDT
10
FORKLIFTS(2) KOMATSU 30 Model FG30HT-16 6,000lb Propane Forklifts with 3-Stage Mast. 57” Forks, 190” Reach, Sideshift, Threaded Tires, sn:203520A, mfg.2006
KOMATSU Model FD30T-14 5,000lb Capacity Diesel Forklift with 48” Forks, 146” Reach, Solid Tires, Side Shift, sn:586247A
SNORKEL Scissor Lift with 24” x 90” Platform Type, 20' Lift Height
CATERPILLAR Model GP25K 4650lb Propane Forklift with 2-Stage Mast, 42” Forks, Rotating, Threaded Tires, sn:AT27C01212
KOMATSU Model FD60-3 13,000lb Capacity Outdoor Forklift with 2-Stage x 10’ Mast, 8” Forks, 169” Reach, Gas Engine, Dual Front Pneumatic Tires, sn:40691
CRANESABELL-HOWE 1 & 2 Ton Freestanding Jib Cranes with Electric Hoists & Pendant Controls
KOMATSU 13,000LB OUTDOOR FORKLIFT & CATERPILLAR 4650LB PROPANE FORKLIFT
INTERNATIONAL 24' BOX TRUCK & FORD 24' FLAT BED TRUCK
(2) KOMATSU 30 6,000LB PROPANE FORKLIFTS
CHEVROLET KODIAK 12' FLAT BED TRUCK
FORD E-350XLT SUPER DUTY VAN SNORKEL SCISSOR LIFT
TRUCKSINTERNATIONAL 4700 DT466E 24’ Box Truck with Dual Rear Tires, Automatic Transmission, Diesel, VIN#1HTSCAAM7XH620138, mfg. 1998
FORD F650 Flat Bed Truck with Dual Rear Tires, Automatic Transmission, 24’ Bed, Inline 6 Diesel Engine, VIN#3FRNX65224V606561, mfg.2000
CHEVROLET Kodiak 12’ Flat Bed Truck with CAT J126 Engine, Auto Transmission, Diesel, VIN#1GBL7H1JJTJ103351, Approx. 79,500 Miles, mfg.1996
FORD E-350XLT Super Duty Van, VIN#1FBSS31S0XHAJ9854, mfg.1998
ATTENDING THE AUCTION IN PERSON?What you need to bring.....
• Your Driver’s License• Business Card
• Tax Exempt Form if Non Taxable• Bank Letter of Guarantee if Paying
via Company Check
105214_Plano.indd 10 8/18/16 4:24 PM
AUCTION SALE DATE & TIME – THURSDAY, OCTOBER 6TH @ 10:00 A.M. CDT
11
ABELL-HOWE 1 & 2 TON FREESTANDING JIB CRANES
www.asset-sales.com
105214_Plano.indd 11 8/17/16 1:47 PM
Turn
ing Y
our Assets into Dollars Asset Sales, Inc.
Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – Texas License #13968
(4) KITAMURA HX630i 4-AXIS CNC HORIZONTAL MACHINING CENTER
DIRECTIONS From Dallas Fort Worth Airport:Exit Airport onto TX-121 BUS toward Lewisville. Continue onto TX-121 BUS N. Turn left onto S. Stemmons Fwy, use the left lane for ramp onto I-35E N / I-35N for 46 miles. Take exit 498 for US.82 toward Wichita Falls / Sherman. Merge onto I-35 Frontage Rd for .8 miles. Turn right onto US-82E / Summitt Ave. for 4 miles. Plant will be on the right. Follow the Auction Signs.
HOTELSHOLIDAY INN EXPRESS GAINESVILLE 320 I-35 Frontage Rd. - Gainesville, TX 76240 (940) 665-0505
HILTON GARDEN INN LAS COLINAS 7516 Las Colinas Blvd. - Irving, TX 75063 (972) 444-8434
UPCOMING AUCTIONSTUESDAY, SEPTEMBER 27th - McCoy GlobalLate Model Haas & Mazak CNC Machining & Manual Machine ShopOnsite / OnlineBroussard (Lafayette), LA 70518
PUBLIC AUCTIONEQUIPMENT LIQUIDATION
PLANO MACHINE & INSTRUMENT INC.
LATE MODEL CNC & MANUAL MACHINESGAINESVILLE, TX
THURSDAY, OCTOBER 6TH @ 10:00 A.M. CDT
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes.
Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.
ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 13% Buyer’s Premium will apply to all onsite purchases and a 16% Buyer’s Premium for online purchases.
REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by As-set Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
PresortedFirst Class Mail
U.S. PostagePAID
Kokomo, INPermit No. 154
4AVAIL.2011
105214_Plano.indd 12 8/17/16 1:47 PM