QuickSilverUSA/// FloWell Presentation

FloWell Solutions

Dear Customer,

Thank you for taking time to look at the

FloWell Solutions Product.

We share with you a desire to improve production,

reduce operating costs, and harness one of the world’s

major fossil fuels, OIL, in an environmentally safe and

efficient manner.

Yours Faithfully,

QuickSilverUSA////TM.

www.quicksilverusa.org

Increased Production =

Increased Profit!

There are many ways to increase profits!

Increase in productivity and reduction in

production expenses are the two sure ways!

We have a product to offer you which

combines both of the goals!

We are pleased to be able to introduce to

you an application product that will assist

you to achieve all these aims.

Welcome to

QuickSilverUSA///TM.



What is FloWell?

FloWell is a non-hazardous aqueous

solution that is formulated to return

precipitated wax (Paraffin) to it’s original

oil phase in crude oil.

It is a non-flammable and non-toxic

product for use in all phases of the

oil industry.

The result from a typical application

is a marked increase in oil production,

improved oil to water mix, and

reductions in well down time

and maintenance costs.




What is paraffin wax

in oil?

Paraffin wax is a component of Crude Oil.

There are two main phases for Paraffin’s, Cloud Point and Pour Point.

Cloud point is the temperature at which

Paraffin’s start to wax and precipitate out of

the crude oil.

Pour point is the temperature at which this

waxing process becomes so prolific that the

oil ceases to flow.

FloWell remediates this Paraffin waxing

process, and returns the wax back to the oil

where it remains right through to the

refining process irrespective of temperature

considerations thereafter.




How does FloWell work?

When mixed with adequate amounts of

good crude oil and agitated, FloWell

breaks down Paraffin causing it to return

to the crude oil solution where it remains

in solution until refining takes place.

Furthermore, one of the major added

benefits for FloWell applications is a

reduction in viscosity apparent in the oil

that has been treated. This will improve all

aspects of production from the treatment

point all the way through the flow lines to

the refinery!

Not only does our product work efficiently,

it can be proven to be one of the most

cost-effective paraffin treatments available

to the industry.




Where can FloWell

be applied?

FloWell can be applied at any point in the oil

production process where Paraffin build-up

occurs. It is most effective in the following

applications:

· Down hole

· Flow line

· Tank bottom

· Pipeline

· Transportation tankers

· Tank farm facility operations




Down the well

Let us examine one of these applications!

When applied to your production wells,

FloWell disperses paraffin deposits as well as

scale-like deposits which occur in the well

bore, perforations, and pump during down

well operations.

In addition to eliminating paraffin build-up

around the tubing and pumping

components, monitoring of application will

ensure any existing and future paraffin

deposits will also be eliminated by FloWell

and prevented from accumulating in flow

lines and separators.

Additionally, by applying FloWell to down

well operations, one can increase the

effectiveness of scale and corrosion

inhibitors, plus keep waxy deposits out

of water handling facilities.


FloWell Application Study No.1

Please study this chart showing a typical case study for a well in the UK

providing the cost effectiveness and enhanced profitability available from

using FloWell.



FloWell Application

Study No.1 continued...

You can see from the chart the production

average rose from 10 BBL’s per day to just over

18 BBL’s per day!

An amazing increase in production of nearly 80%

which when valued at current oil prices equates to

increase profits around $720.00 per day! As these

figures are taken from real production trials then

even after treatment with FloWell there can be on

site issues affecting production therefore as seen

below, some negative figures can affect our data

accordingly.

It is worth noting, the chart only logs the

increased production, but does not calculate the

hidden savings from less down time, equipment

failure and breakages, reduced chemical

applications, cleaning activities along with their

respective labour costs all drastically reduced by

an application of FloWell.




FloWell Application

Study No.2

Water Reduction: The previous chart only shows the increases

achieved in production, and this was selected from

a typically good well.

It does not demonstrate the improved production

figures that can be achieved when FloWell is applied

into wells with high water content and a treatment

of FloWell is continued throughout the production

period following the initial treatment.

FloWell is unique because it is highly efficient at

separating oil from water so where a customer has

particularly high water content with their oil

production, then they will see additional production

bene ts using FloWell. This following chart

demonstrates just how effective this can be...


FloWell Application Study No.2



FloWell Application

Study No.2 continued...

You can see from the production gures above,

the average rose from nearly 5 BBL’s per day to

just over 19 BBL’s per day! An amazing increase

in production of nearly 300% which when

valued at current oil prices equates to increased

profits around $1275.00 per day!

This was achieved primarily through two factors,

one the efficient manner that the water is

separated from the oil by FloWell and secondly by

implementing a strategy of dosing the well with

FloWell throughout it’s production campaigns.

This methodology is proven to be cost efficient by

lengthening the times between well cleaning

operations and maintaining optimum levels of

well production.




Oil Viscosity Reduction

180

Figure 1 shows the typical viscosity loss for

Venezuelan Crude (API=12.2)

By decreasing the oil viscosity, there is an

increase in the amount of flow from the well.

This provides improved above ground handling

as it lowers costs due to less heating of oil to

make it flow.

160

140

120

A

B

C

D 100

By keeping the paraffin build up low, there is a

reduction in pressure increases normally resulting

80

from the plugging of formations.

Improved overall well production is obtained by

maintaining an improved degree of internal well

cleanliness.

You will see from this graph just how effective an

application of FloWell is in lowering crude oil

viscosity and the resultant flow benefits

attributable accordingly.


60

40

20

0

0 10 20 30 40 50 60

E

F

A 148,000 Cp D 2nd run (18.8ºC)

B 3cc FloWell (6% by

col.)

E Velocity loss =

90.8%

C 1st run (17.7ºC) F 12,000 Cp @ 60min



Oil Viscosity Reduction

continued...

Figure 1 shows the effect of FloWell on oil viscosity

as a function of time. The laboratories Viscometer

was run at 1.0rpm, so that no stirring was induced. The drop of viscosity (Figure 1) is therefore due to

penetration of the oil by FloWell with time. The result

of this test model was an apparent drop in viscosity

of about 90%: · Adding sequentially, 1cc of FloWell + 2cc distillate (2%

· and 4% by volume, respectively) also lowers viscosity

· to 35% of original. · Adding both together (1cc FloWell and 1cc distillate)

· seems a bit more effective. Adding 2cc of additional

· distallate lowered viscosity to 29% of original. · Further addition of 2cc of FloWell (a total of 6 volume %)

· drops the apparent viscosity to 480 cp, a value about

· 2% of original.

Remember, once FloWell has returned the Paraffin’s (wax)

back to the oil phase then they stay in the crude oil with

the lowered viscosity through a wide band of

temperature ranges to the refinery process.





Even more savings!

What we have not demonstrated are the savings that are

achieved from the following areas: · Fewer Hot Oil or Hot Water washes down wells consequently

· this will result in significant savings on well down time! · Reduction in wear on well head equipment, no string breaks

· due to precipitated wax, less wear and tear means less

· breakdowns with down time consequently equals more

· production! · Less power required to produce the oil. · Less water separation from the oil produced therefore less

· handling costs · Fewer chemical applications, this can save thousands

· of dollars! · Reduction in labour operating costs at the well head site · Improved oil flow downstream through pipelines and

· storage tanks along with their respective handling

· equipment all the way to the re ning process · More effective well extraction in terms of oil produced means

· that the site is being exploited more efficiently important

· in times of oil depletion across the globe!


It's Fast,Smart, and Green!

QuickSilverUSA////TM

our product, FloWell™, enables you to increase your bottomline, “ROI” Flow Optimization Maximized,

recover more oil, and flatten your supply chain. Oil producers, desire a smarter and faster Flow Optimization, without having to

subsidize the oil service industry's who promote practices that provide temporary relief, and worsen the problem of

Wax Precipitation, Corrosion, Ect…. Finally, there is a better Green! way.

It's Fast!

Optimizes flow rate and volume (flush rate increases up to 330%) *

Viscosity reduction by as much as 98%*

Initial treatment complete in less than 4 hours -- no more wax-related downtime! *

Reduces plugging in formations, and eliminates paraffin caking within perforations and casings Improves above-ground handling, creating a dry oil with little to no water cut Well, transport, pipeline, and storage assets are "future ready" for regulatory and compliance inspections

It's Smart!

Returns $7US for each $1US of product used *

Cuts cost to produce a barrel of oil up to 60% *

Reduces amperage up to 35%; reduces rod torque load up to 75% * Enhances mechanical reliability and increases well longevity

No more hot oil wash, pigging, harsh solvents, acids, "bugs", or ineffective dispersants

Equally effective in gasoline, diesel, kerosene, Av-gas, ethanol, methanol, or bio-fuel tanks

Effective regardless of geology, well characteristics, or water cut

It's Green!

It's non-flamable and non-hazardous

Contains no toxins, sulphates, acids, nitrates, butyl, or phosphates

Product is not a microbe or "bug"

Extremely biodegradable and no harm will come to environment if spilled

Environmentally and politically friendly -- supports international and regulatory "green initiatives"

* Based upon historical results comprised of actual user results, annual reduced expenses and realized increases in production. Actual results will vary.


Phone: 415-937-7872 Skype: quicksilverusa

Website: www.quicksilverusa.org

UNITED STATES | CANADA | LATIN AMERICA

EUROPE | SCANDINAVIA | CHINA | INDIA | PACIFIC RIM

RUSSIAN FEDERATION | MIDDLE EAST | AFRICA | AUSTRALIA

QuickSilverUSA///, QuickSilverInternational/// is an officially licensed partner of Flowell Solutions Division,

Engineering Services (Humber) Ltd, United Kingdom (est. 1955), with rights in the above listed Territories

United States, Canada, Central and South America. All marks are registered trademarks.


http://www.quicksilverusa.org/


A Division of Engineering Services (Humber) Ltd Tel: +1-415-937-7872 E-Mail: [email protected]

MATERIAL SAFETY DATA SHEET

Health & Safety Information Sheet Produced according to 2001/58/EC & Complies with ANSI Standard ANSI Z400.1-2004

th

01. IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY PRODUCT NAME: Flow W STOCK REFERENCE: 07246 Sales and Distribution by: Engineering Services (Humber) Ltd

FloWell Solutions LTD.

West Carr Road, Retford Nottinghamshire, England, DN227SW


Tel: +1-415-937-7872 / E-Mail: [email protected]

02. COMPOSITION / information of ingredients Description: FloWell is comprised of a proprietary mixture of detergents and surfactants A synthetic aqueous surfactant solution for paraffin wax remediation and cleaning in oil wells, and subsequent downstream flow lines FloWell is supplied ready to use in Steel or Plastic Drums or Plastic IBC Totes Use of the product: Should not be sold directly to the general public restricted to professional users. CHEMICAL DATA

CAS # EC Number UN Number Hazard Data Propriety synthetic surfactant preparation H2O Sodium Hydroxide Alkaline Salts

N/A 7732-18-5 1310-72-2

N/A N/A 215-185-S

N/A N/A N/A

N/A N/A ACGIH TLV 2 ppm

03. HAZARD IDENTIFICATION Irritating to eyes and prolonged contact may be irritating to the skin. 04. FIRST AID MEASURES INHALATION: Not Applicable if used correctly SKIN CONTACT: Wash off any material with warm soapy water. EYE CONTACT: Wash out thoroughly with clean water or saline solution for 15 minutes and

seek medical advice. INGESTION: Do not induce vomiting, drink plenty of water and seek medical advice.

mailto:[email protected]

05. FIRE FIGHTING MEASURE Material is non hazardous and in aqueous form is non-flammable, no flash point, no upper or lower explosion point, no ignition temperature, no hazardous combustion products, no special fire fighting procedures, no unusual fire or explosion properties or risks, and may be safely washed/poured down drains. Use fire fighting measures suitable for surrounding environment. 06. ACCIDENTAL RELEASE MEASURES Steps to be taken in Case Material is Released or Spilled: Clean up using absorbent materials, dispose of waste materials in waste receptacles/trash cans, rinse surfaces thoroughly and apply local safety spill measures as required may be safely washed or poured down drains. Aquatic Toxicity: Material is slightly alkaline and could affect the pH of receiving water. Waste Disposal: Dispose in accordance with Local Regulations. 07. HANDLING AND STORAGE HANDLING Wear suitable goggles, gloves and protective clothing when handling actual product. STORAGE Containers should be kept tightly closed when not in use. Store in dry cool conditions away from strong oxidizers and acids. Use in rotation. Protect from freezing wherever possible. 08. EXPOSURE CONTROLS AND PERSONAL PROTECTION SPECIFIC PERSONAL PROTECTIVE EQUIPMENT (PPE) SKIN PROTECTION Wear impermeable plastic or rubber gloves and suitable work clothes. Wash off splashes to skin immediately. EYE PROTECTION Wear goggles or safety glasses with side shields. Keep eye wash facilities close at hand. RESPIRATORY PROTECTION Exposure to airborne concentrations would be unlikely as supplied and when used as intended with adequate ventilation. SPECIAL PROTECTION INFORMATION Ventilation Requirements: Adequate to maintain Butyl Cello-Solve TLV below 25 ppm for employee 09. PHYSICAL AND CHEMICAL PROPERTIES PHYSICAL DATA

Boiling Point: o o 220 F (100 C)

Melting Point: N/A Specific Gravity: 0.93-0.98 Vapour Pressure: N/A Vapour Density: N/A Solubility in Water: 100 % % Volatiles By Volume: 89-90 Evaporation Rate: N/A Appearance & Odour: Yellow/Clean pH (as is): 12.9 Flash point: Non Flammable

10. STABILITY AND REACTIVITY Conditions Contributing To Instability: Stable Incompatibility: Strong oxidizers, acids. Hazardous Decomposition Products: None Conditions Contributing To Hazardous Polymerization: Will not occur 11. TOXICOLOGICAL INFORMATION PRODUCT INFORMATION:

A synthetic aqueous surfactant solution HUMAN DATA IRRITANT PROPERTIES The alkalinity of this product could cause a chemical irritation to the skin and eyes with prolonged and repeated contact. RESPIRATORY EFFECTS None expected in the normal use of the product. GASTROINTESTINAL EFFECTS Could cause Diarrhoea and other stomach and intestinal irritations, therefore ingestion should be avoided. 12. ECOLOGICAL INFORMATION Components of the preparation are not classed as a hazardous waste in their respective solutions. This material is soluble in water; contamination of watercourses should be avoided where possible as it is alkaline and could affect the pH of receiving water if disposed of in large quantities. 13. DISPOSAL CONSIDERATIONS Components of the preparation are not classed as a hazardous waste in their respective solutions. Dispose via a licensed waste disposal contractor according to local regulations. Before disposal customers are advised to evaluate any changes that may have occurred to the material. 14. TRANSPORT INFORMATION Not classified as dangerous goods under relevant international transport regulations (ADR, RID, IATA, IMDG Refer Section 16 “Definitions”). USA Federal Regulations: Non-hazardous OSHA 174 Section 1986 Packing requirements are specified in steel / plastic containers. Non-Hazardous Material Ships under US code 55 for food grade materials

15. REGULATORY INFORMATION Non Hazardous – Not Applicable 16. OTHER INFORMATION Customers are urged to ensure that the product is entirely suitable for their own purposes. It is the customer's responsibility to ensure that a suitable and sufficient assessment of the risks created by a work activity using this product is undertaken before this product is used. If the product is redistributed or reformulated for sale details and recommended methods for safe handling must be passed onto customers. Every effort has been made to ensure that this information is correct at the time of preparation. All information contained in this data sheet relates to this product and its intended usage. Every effort has been made to ensure that this information is correct and gives adequate safety margins in line with current knowledge.

Date post:	16-Jul-2015
Category:	Technology
Upload:	thomas-danford
View:	389 times
Download:	0 times

QuickSilverUSA/// FloWell Presentation

Technology