Date post: | 20-Feb-2017 |
Category: |
Technology |
Upload: | anna-wang |
View: | 417 times |
Download: | 0 times |
www.smthelp.com
Email: [email protected]
Skype: annawangh
MP: +86-13509636260
Prepare by: Anna Wang
S7000 Eagle-eye LED inserter
S7000 Eagle-eye Odd Form LED inserter
Definition of Odd Form Components
Odd shape through-hole components that cannot be automatically placed using standard through-hole insert machines due to the component’s height, shape or weight.
Odd Form Component Examples
Advantages of Odd Form Components
– Drive to reduce defects
– Increase throughput
– Saving of manual labor cost
– Reduce cost of manufacturing
• Challenges and advantages of odd form components for PCB assembly
– Market Challenges
• Irregular packaging
• Conversion from Hand assembly
• Competing in low cost markets
• No industry standards for assembly process
• Large / heavy components
• High force requirements
– Advantages of our S7000 machine
• Most flexible head in the market
• Vision inspection on components enables applications
of use in Pin in Paste
• Vision component inspection finds quality problems
before insertion
• Data driven programming and component database bridge the gap between custom automation and Surface Mount assembly machine
2015/12/1 Tuesday
Automatic Odd Form Inserter Demonstration
2015/12/1 Tuesday
Machine Parameter
1.Revolutionary new generation control software, use the advanced touch technology, finger tap can get into the coordinates or determine the insert location.
A skilled engineer was complete a new insertion program only 3~5 minutes, profit from the latest research for touch technology.
2.Auto Inspection: Realize automatic detection and auto add insert when insert error, improve the machine efficient.
3. Loader/Unloader PCB time: 3s.
4.Components available: 1. Terminal size: Max. Width: 20mm, Height: 20mm
2、Tact switch: 6.0*6.0*4.5~11.0*11.0*4.5
3、Connector: 2 pin ~9 pin
4、Eagle-eye LED: 4 Pin
5、Others Odd Form component can base on componen's shape
and size to special order body pallet.
5.Production packaging: Tube, Tape, Bulk , Trays.
6.Avalable PCB Size: Max. 480mm*390mm; Min. 50*50mm
7.Insertion Range: Max. 460mm*360mm
2015/12/1 Tuesday
Compatible for odd form components:Tube, Tape, Bulk,Trays, etc.
2015/12/1 Tuesday
Pictures of Odd Form Component Insertion Product
2015/12/1 Tuesday
Thank you very much for reading.
To know more about us, please visit www.smthelp.com
Email: [email protected]
Skype: annawangh
Tel: +86-755-83203237
Fax: +86-755-23240492
Mobile: +86-13509636260