SBC6045 Single Board Computer • 400MHz Atmel AT91SAM9G45 ARM926EJ-S Microcontroller • On Board 256MB DDR2 SDRAM + 256MB Nand Flash + 4MB Data Flash • 5 UARTs, High-speed USB Host/OTG, Ethernet, CAN, LCD/TSP, SD, TF, … • Extended Precise RTC, RS485 with Isolation • Ready-to Run Linux 2.6.30 and WinCE 6.0 OS SBC6045 Single Board Computer SBC6045 Single Board Computer with 7” LCD Description Embest SBC6045 is a high-performance ARM embedded single board computer (SBC) provided versatile communication interfaces to meet a wide variety of applications such as industrial control, automation, equipment monitoring, data logging, medical equipment, embedded web server etc. It is based on the 400MHz Atmel AT91SAM9G45 microprocessor and features wide input range from 12V to 36V with isolated power. The SBC6045 board uses Mini6045 processor card as the CPU core board which has 256MB (2*128MByte) DDR2 SDRAM, 256MB Nand Flash, 4MB Data Flash, 2Kbit EEPROM and integrates UART, Ethernet, USB OTG, LCD, Touch screen, RTC and TF card slot on board. It connects to the expansion board through two 2.0mm pitch 80-pin connectors which enables the expansion board to access to all the core board's I/O through on-board connectors. The SBC6045 also has expansion blocks such as CAN and SD card slot as well as a Mini-PCI slot and SIM card slot which has integrated UART and USB signals. Customer can attach 3G module, GPRS module and other Mini-PCI devices to this interface. The board is capable of supporting Linux 2.6.30 open source operating system. Embest provides BSP package, user manual and some other tools and documents to help customer with their development. It would be a stand along platform ideal for your evaluation and early development work. It can be also used directly for your next product design. Hardware Features The AT91SAM9G45 embedded microprocessor is based on the integration of an ARM926EJ-S processor with fast SRAM, and a wide range of peripherals. It is designed to provide a high performance processor solution with a high flexibility for general and multimedia oriented applications. The internal multi-layer bus architecture associated with a multi-port DDR2, a 32-bit External Bus Interface and 64 KBytes of internal SRAM allows the SAM9G45 to sustain the high bandwidth required by its high speed peripherals. The AT91SAM9G45 power management (APMC) features an efficient clock gating which, associated with the ARM926EJ-S low power modes, greatly reduces power consumption under all conditions of use.
Transcript
SBC6045 Single Board Computer
• 400MHz Atmel AT91SAM9G45 ARM926EJ-S Microcontroller • On Board 256MB DDR2 SDRAM + 256MB Nand Flash + 4MB Data Flash • 5 UARTs, High-speed USB Host/OTG, Ethernet, CAN, LCD/TSP, SD, TF, … • Extended Precise RTC, RS485 with Isolation • Ready-to Run Linux 2.6.30 and WinCE 6.0 OS
SBC6045 Single Board Computer SBC6045 Single Board Computer with 7” LCD Description Embest SBC6045 is a high-performance ARM embedded single board computer (SBC) provided versatile communication interfaces to meet a wide variety of applications such as industrial control, automation, equipment monitoring, data logging, medical equipment, embedded web server etc. It is based on the 400MHz Atmel AT91SAM9G45 microprocessor and features wide input range from 12V to 36V with isolated power. The SBC6045 board uses Mini6045 processor card as the CPU core board which has 256MB (2*128MByte) DDR2 SDRAM, 256MB Nand Flash, 4MB Data Flash, 2Kbit EEPROM and integrates UART, Ethernet, USB OTG, LCD, Touch screen, RTC and TF card slot on board. It connects to the expansion board through two 2.0mm pitch 80-pin connectors which enables the expansion board to access to all the core board's I/O through on-board connectors. The SBC6045 also has expansion blocks such as CAN and SD card slot as well as a Mini-PCI slot and SIM card slot which has integrated UART and USB signals. Customer can attach 3G module, GPRS module and other Mini-PCI devices to this interface. The board is capable of supporting Linux 2.6.30 open source operating system. Embest provides BSP package, user manual and some other tools and documents to help customer with their development. It would be a stand along platform ideal for your evaluation and early development work. It can be also used directly for your next product design. Hardware Features
The AT91SAM9G45 embedded microprocessor is based on the integration of an ARM926EJ-S processor with fast SRAM, and a wide range of peripherals. It is designed to provide a high performance processor solution with a high flexibility for general and multimedia oriented applications. The internal multi-layer bus architecture associated with a multi-port DDR2, a 32-bit External Bus Interface and 64 KBytes of internal SRAM allows the SAM9G45 to sustain the high bandwidth required by its high speed peripherals. The AT91SAM9G45 power management (APMC) features an efficient clock gating which, associated with the ARM926EJ-S low power modes, greatly reduces power consumption under all conditions of use.
To reduce the overall system cost, the AT91SAM9G45 integrates many hardware peripherals such as
High Speed (480 Mbps) USB Device and Host with transceivers, a 10/100 Mbps Ethernet controller, a High Speed Multimedia Card interface, an LCD controller supporting STN and TFT displays up to 1280*860, a camera interface and several communication peripherals such as USARTs, Serial Synchronous Controllers and Two Wire Interface. All these peripherals are DMA oriented, reducing the CPU overload.
The SBC6045 has a CPU board Mini6045 integrated with AT91SAM9G45 microcontroller, Nand
Flash, DataFlash, EEPROM and DDR2 SDRAM on it, which exposes many of these features to the user in support of developing specific solutions. The CPU board can be mounted directly onto the expansion board through two 2.0mm pitch 80-pin expansion connectors. This board is characterized as follows:
Mechanical Parameters • Dimensions: 185 x 125mm (expansion board), 82 x 67mm (CPU board) • Working temperature: -10~70 Celsius • Power supply: +5V (CPU core Board), +12V~+36V (Expansion Board, provides +12V power
adapter as default, with isolation power) The SBC6045 CPU Core Board (Mini6045)
Processor • Atmel AT91SAM9G45 ARM926EJ-S Core Microprocessor - 32 KBytes Data Cache, 32 KBytes Instruction Cache, MMU - One 64-kbyte internal SRAM and One 64-kbyte internal ROM - Can work at up to 400MHz Memory • 128MByte*2 DDR2 SDRAM • 256MBbyte NAND Flash • 4MByte Data Flash • 2Kbit EEPROM Signals Routed to Pins • Precise RTC (extended through DS3231SN) • Watchdog timer, supported with the microprocessor • One 40-pin LCD interface with 4-wire resistive touch screen interface (24-bit color LCD) • One LVDS interface (Supports 8-bit LCD resolution up to 1280*860) • One TF Card Slot • One 10/100M Ethernet interface
• One High-speed USB OTG 2.0 port (480Mps) • One power indicator • One system working status indicator • Two 2.0mm pitch 80-pin expansion connectors (UART 0-3, Debug serial port, Ethernet, USB
OTG, LVDS, 2 SPI, 2 TWI, SDIO, PWM, ISI, AC97, Touch Screen, JTAG and all IOs are led out via the two connectors.)
The SBC6045 Expansion Board
Audio/Video Interfaces • Audio output port (supports playing MP3) • 24-bit LVDS signal interface (for large size LCD panel displays, supports resolution up to
Data Transfer Interfaces • 4-wire resistive touch screen interface • Buzzer • Serial Port
One 3-wire RS232 Debug serial port (Debug) One 3-wire RS232/RS485 (with isolation) serial port (COM0) One 5-wire RS232 serial port (COM1) One 3-wire RS232/RS485 (with isolation) serial port (COM2) One 3-wire RS232/TTL serial port (COM3)
• Two CAN 2.0 interfaces (extended through 2 SPI, with power and signal isolation) • One High-speed USB 2.0 Host port, 480Mbps • One 10/100Mbps Ethernet port (RJ45) • One SDHC card slot (Hot plug-and-play) • One TWI interface with speeds up to 400kbps • One SPI interface
Input Interfaces • One DC Power input port • One Standard 20-pin JTAG interface • One IO Button • One Reset Button
Layout Diagram (including the Mother board and the Daughter board)
CPU core board
Expansion Board
Function Block Diagram
Software Features
OS Item Feature Description Version u-boot 1.3.4 Boot Mode Support booting from Nandflash Bootloader Download Mode Support download kernel from SAM-BA or
Ethernet Version Linux 2.6.30 LED LED driver Serial Serial ports drivers RTC RTC driver Ethernet 10/100M Ethernet driver () RS485 RS485 driver CAN CAN driver Buzzer Buzzer driver MMC/SD MMC mode driver USB Host USB Host driver, Hot plug-and-play USB Device USB Device driver EEPROM Provide EEPROM read and write driver GPIO Provided with driver LCD&TSP TFT LCD and touch screen driver Audio Audio out driver NandFlash Provided with driver
Kernel
DataFlash Provided with driver File system File system yaffs2 file system, can be read and written
Network protocol and applications
TCP/IP Complete TCP/IP protocol
System configuration and service
Network Ping Ping command, used in checking system
Ifconfig, route, inetd Used in network configuration and relative service program
Kernel WinCE6.0 RAM and ROM File System Hive-based Registry
WinCE
Driver
Nand Flash, Debug, Serial ports, RS485, CAN, RTC, NET, LCD, Touch Screen, USB Host, USB Device, SD, EEPROM, Audio, LED, Keypad, Buzzer
160-pin Expansion Connector The CPU core board of the SBC6045 is connected to the expansion board via two 2.0mm space 80-pin connectors are as following:
Order Information Order No. T6010117 Item Embest SBC6045 Single Board Computer Hardware SBC6045 board (including the CPU board Mini6045 and the expansion
board) 1 serial cable 1 net cable 1 USB cable 12V power adapter 1 CD with product reference
Software and Documents
Documents (user manual, schematic drawing in PDF format, Datasheet) Linux 2.6.30 BSP WinCE 6.0 BSP
Price Please contact us for detailed information. Optional hardware 4.3” TFT LCD (resolution: 480*272)
7"LCD (resolution: 800*480) Detailed information about the SBC6045 Single Board Computer, please refer to Embest website: http://www.embedinfo.com/english/Product/sbc6045.asp
