Sidchrome ABW Catalogue

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00

6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599

Catalogue

WARNING: Work Safely With Tools Wear Safety Goggles.©2008 THE STANLEY WORKS: Stanley Australia, 82 Taryn Drive, Epping, Victoria 3076.

Stanley Australia National Customer Service Centre: 1800 338 002 Fax: 1800 080 898Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

www.sidchrome.com.auwww.sidchrome.com.au

Industrial & Mechanical

Tool Catalogue

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


The Stanley AustraliaNational Call CentreToll Free Phone: 1800 338 002

Sales Fax: 1800 080 898

Sales Order Enquiries:[email protected]

Stanley New ZealandToll Free Phone: 0800 4 782 653

Sales Fax: 0800 2 782 653

©2008 THE STANLEY WORKS: Stanley Australia, 82 Taryn Drive,

Epping, Victoria 3076.

In this document (“Terms and Conditions”): (a) “Application” means the application by the Customer to Stanley for commercial credit; (b) “Contract” means the contract formed between Stanley and the Customer by an Order accepted by an Order Acknowledgment;(c) “Customer” means the person placing the Order with Stanley; (d) “F.I.S” means free into store;(e) “Goods” means any goods, products, services or materials to be supplied by Stanley; (f) “MFO” means manufactured to order, being Goods not ordinarily stocked by Stanley;(g) “Order” is defined in clause 1(a);(h) “Order Acknowledgment” is defined in clause 1(b);(i) “Stanley” means the related bodies corporate (within the meaning of the Corporations Act 2001) of The Stanley Works Pty Ltd (ABN 69 009 485 170) and for each Contract means the company in this group that issues an Order Acknowledgment; (j) unless otherwise stated, an expression used or defined in the Corporations Act 2001 has the same meaning in the Terms and Conditions.1. Orders, Order Acknowledgments and Contract(a) An order or an offer to purchase can be made by the Customer in writing or verbally.(b) An Order is accepted when the Customer receives from Stanley an order acknowledgment in writing or if writing is not received, acknowledgment verbally or delivery, whichever first occurs.(c) No minimum order value:Orders over $150 delivered FISOrders less than $150 a $10.50 service fee will apply(d) Order Cut Off Time:Where orders are received by Stanley by 2pm EST, the following will apply:Under 3kg, same day despatch via air bag.Over 3kg, next day despatch(e) Urgent Orders:Same Day Despatch:3 – 5 kg $15 fee appliesOver 5 kg market freight charges will apply(f) Feedback Reports:Customers will receive feed back on all faxed and telephoned orders on the following:Price discrepanciesDeleted lines and their alternatives if applicableIncorrect pack quantities Out of stocks with an ETAMFO lines and estimated ETAOrders under $150 will be highlighted to customers and advised of the $10.50 service fee(g) Previous dealings between Stanley and the Customer shall not have any effect on the Contract.(h) Trade custom and/or trade usage is superseded by the Contract and shall not be applicable in the interpretation of the Contract.(i) A Contract constitutes the entire agreement between Stanley and the Customer with respect to the Goods supplied under the Contract, all prior negotiations, proposals and correspondence are superseded by that Contract and these Terms and Conditions will in all circumstances prevail over the Customer’s terms and conditions of purchase (if any).2. Prices (a) Unless otherwise agreed in writing, the price charged for the Goods shall be the price ruling as determined by Stanley at the date of delivery. Any price indications or price lists are subject to alteration in accordance with the price ruling at that date.(b) Where a transaction tax, including a goods and services tax, and any other transaction taxes that come into

existence after the date of these Terms and Conditions, applies to any supply made under these Terms and Conditions, the price charged for the Goods will be exclusive of that transaction tax and Stanley may recover from the Customer, at the time of payment under clause 4, an additional amount on account of that transaction tax.(c) Notwithstanding any provision in the Contract, Stanley may increase the price of Goods after an Order Acknowledgment and prior to delivery of the Goods if the price increase results from an increase in the price of any inputs which comprise part of the Goods.3. Delivery (a) Stanley will make all reasonable efforts to have the Goods delivered to the Customer or his designated agent on the date agreed between the parties, but Stanley shall not be liable for any failure to deliver or delay in delivery for any reason.(b) Stanley will deliver F.I.S anywhere in Australia to specified delivery points of listed customers providing the minimum order value is met.(c) Delivery shall be deemed to have taken place at the time of physical taking of the product by the Customer or by a carrier, whether engaged by Stanley or by the Customer 4. Payment Payment for the Goods must be made in full (without any set off) and received by Stanley by the last business day of the month following the month of invoice unless otherwise identified by Stanley on any statement of account or invoice. Payment is only received by Stanley when it receives cash or when the proceeds of other methods of payment are credited to Stanley’s bank account. 5. Title(a) The legal and equitable title to the Goods will only be transferred from Stanley to the Customer when the Customer has met and paid all that is owed to Stanley on any account whatsoever.(b) The Customer acknowledges that until the Customer has met and paid all that is owed to on any account whatsoever, the Customer holds the Goods as bailee for Stanley and that a fiduciary relationship exists between the Customer and Stanley.(c) Until Stanley receives full payment of all monies due to it from the Customer, the Customer shall keep the Goods separate and in good condition as a fiduciary of Stanley, clearly showing Stanley’s ownership of the Goods and, shall keep books recording Stanley’s ownership of the Goods and the Customer’s sale or otherwise of them in accordance with paragraphs 5(e) and 5(f). The Customer if required, shall deliver the Goods up to Stanley.(d) If the Customer defaults, in addition to clause 6(b), Stanley may take possession of the Goods wherever the Goods are located and the Customer agrees that representatives of Stanley may enter upon the Customer’s premises for that purpose.(e) Despite paragraph 5(a), the Customer may sell as fiduciary agent for Stanley the Goods to a third party in the normal course of the Customer’s business provided that where the Customer is paid by that third party, the Customer holds the proceeds of sale to the extent of the amount owing by the Customer to Stanley at the time of receipt of such proceeds on trust for Stanley . The Customer must keep those proceeds separate on trust for Stanley and not mix those proceeds with any other monies.(f) If the Customer uses the Goods in some manufacturing or construction process of its own or some third party, then the Customer shall hold such part of the proceeds of such manufacturing or construction process as related to the Goods on trust for Stanley. Such part shall be deemed to equal in dollar terms the amount owing by the Customer to Stanley at the time of the receipt of such proceeds.

The Customer must keep that part of the proceeds separate on trust for Stanley and not mix those proceeds with any other monies.Notwithstanding the above, the Customer is still required to pay Stanley for Goods already delivered and for Goods manufactured or ordered to specification and not yet delivered.6. Default(a) The Customer will be in default if:i) the Customer breaches the Terms and Conditions; ii) payment for the Goods has not been received by Stanley by the due date of payment;iii) the Customer being an individual commits an act of bankruptcy or becomes an insolvent under administration;iv) the Customer being a body corporate becomes an externally-administered body corporate or has an application for winding up filed against it;v) Stanley forms the opinion that the Customer’s credit worthiness or credit standing alters from that indicated in its Application.(b) If the Customer defaults, Stanley may:i) treat the whole of the Contract and any other Contract with the Customer as repudiated and sue for breach of contract; and/orii) refuse to supply any Goods to the Customer; and/oriii) claim the return of any Goods in the Customer’s possession where title has not passed to the Customer; and/oriv) without notice to the Customer withdraw or vary any credit Stanley has provided to the Customer; and/orv) without notice to the Customer make all monies owing by the Customer to Stanley on any account immediately due and payable.7. Risk Risk in the Goods passes to the Customer upon delivery (including all risks associated with unloading) or upon title in the Goods passing to the Customer, whichever is the earlier.8. Credit(a) Stanley may grant the Customer credit upon the Terms and Conditions on the basis of the Application and such other documents and information as may be required by Stanley.(b) Until Stanley grants the Customer credit by notice in writing, Stanley will only supply Goods to the Customer on the basis of cash in advance.(c) The granting of credit does not oblige Stanley to extend any particular amount of credit to the Customer.(d) The Customer must notify Stanley in writing if there is any change in the shareholding or ownership of the Customer or any material change in the Customer’s financial position.9. Force Majeure Stanley is not liable for failure to perform the Contract to the extent and for so long as its performance is prevented or delayed because of:(a) circumstances outside Stanley control;(b) failure of Stanley machinery; or(c) failure of a supplier to Stanley.10. Representations and Fitness for Purpose(a) Except as expressly provided to the contrary in the Contract, all representations, warranties, terms and conditions in relation to the Goods (whether implied or otherwise) are hereby excluded to the maximum extent permitted by law. (b) The Customer agrees that if it is aware (or should be aware) that the Goods, the subject of an Order, are for a particular purpose (including, but not limited to, use as a component part of another product) or are required to possess special or uniform characteristics, the Customer will clearly specify that purpose or those characteristics in any such Order.11. Limitation of Liability(a) Subject to clause 10(a), Stanley’s

liability to the Customer (and any party claiming through the Customer against Stanley) for any claim for loss or damages (including legal expenses) made in connection with the Contract for contract, tort (including negligence), under statute, in equity or otherwise shall exclude to the maximum extent permitted by law, all implied terms and statutory warranties that may apply to the Goods and shall be as follows:i) if Stanley is in breach of a Contract Stanley’s liability is strictly limited to: (A) for goods, products or materials the cost of replacement of the defective Goods as soon as reasonably practicable, or the repair of the defective Goods or the repayment (or allowance) of the invoice price of the defective Goods at the option of Stanley; (B) for services, to the provision of the services again or payment of the cost of having the relevant services provided again at the option of Stanley;ii) Stanley’s liability for breach of a Contract does not extend beyond the defective Goods to any other Goods that are part of an Order or otherwise;iii) where loss or damage is not covered by subparagraph 11(a)(i), Stanley is not liable to the Customer under statute, in equity or in tort (including negligence or otherwise) for any loss or damage to person or property arising from or caused in any way by the Goods;iv) Stanley shall not be liable for any indirect, special or consequential loss or damage of any nature whatsoever resulting from or caused in any way by the Goods;v) “indirect, special or consequential loss or damage” includes: (A) any loss of income, profit, revenue or business; (B) any loss of goodwill or reputation; (C) any loss of value of intellectual property.(b) Any claim by the Customer in respect of defective Goods or shortages must be made in writing within 21 days of the delivery of the Goods.(c) Stanley’s obligations in the event of paragraph 11(a) applying do not include: i) the cost of removal of defective Goods; ii) defects in Goods caused by improper use or maintenance of Goods or related components or normal wear and tear and damage. 12. Waiver Stanley waives a right under a Contract only by written notice that it waives that right. A waiver is limited to the specific instance to which it relates and to the specific purpose for which it is given.13. Severance If a provision of a Contract would, but for this clause, be unenforceable:(a) the provision must be read down to the extent necessary to avoid that result;(b) if the provision cannot be read down to that extent, it must be severed without altering the validity and enforceability of the remainder of the Contract.14. Variation Stanley may vary the Terms and Conditions without notice to the Customer.15. Costs The Customer must pay Stanley all costs and expenses incurred by Stanley in connection with the Contract including legal expenses (on a solicitor-client basis), stamp duty and costs incurred in the recovery of monies owing by the Customer to Stanley or in otherwise enforcing Stanley’s rights against the Customer under the Contract.16. Applicable Law This document is governed by the law of the State or Territory in which the Order is accepted by Stanley and the courts of that State or Territory have non exclusive jurisdiction in connection with this document. The Sale of Goods (Vienna Convention) Act 1986 (New South Wales) (and any similar legislation relating to the Vienna Convention in other States or Territories) does not apply to the Contract.17. Stanley may Assign Without notice to the Customer, Stanley may assign to any person this document and any Contract.

Standard terms and conditions of saleEffective 1 January 2004

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



Sales Fax: 1800 080 898



Sales Fax: 0800 2 782 653








• Thisguaranteedoesnotcovermodified,abused,neglectedorexcessivelywornproductasaresultofimproperuseorfairwear&tear.

• Forcertainitemsthataredefectivebutrepairable,itmayonlybenecessarytoreplaceaparticularpart.Wherethisisapplicableonlytherequiredpartwillbereplacedfreeofcharge.

• Thefollowingisalistofthoseitemswhicharerepairable:ratchets,flexbars,torquewrenches&airtools.

• Forratchetswherefairwearandtearhasoccurred,theonlyoptionsaretohaveitrepairedorforthecustomertopurchaseanewproduct.

• Anyproductsubjecttoaguaranteeclaim,mustbereturnedtotheplaceofpurchase.Uponacceptanceoftheclaim,theproductwillbereplacedorrepairedfreeofcharge.

• RelianceisplacedontheproductknowledgeandjudgementofStanley®distributorsandrepresentativestoapprovethereplacementofdefectiveproductshoulditoccur.

• ThisGuaranteeisofferedinadditiontoallstatutory

rightsconferredontheconsumer.Itisalsoatermofthecontract,thattothefullextentpermittedbythelaw:theliabilityofStanley®Australiaforanybreachofaconditionorguaranteeimpliedbylawislimitedtoreplacementoftheproduct.

• Sidchrome®warrantsairtoolstotheoriginalretailpurchaserthatthisproductisfreefromdefectsinmaterialandworkmanship,andagreestorepairorreplace,Sidchrome’soption,anydefectiveproductwithin2yearfromthedateofpurchase.Thiswarrantyisnottransferable.Itonlycoversdamageresultingfromdefectsinmaterialorworkmanship,anditdoesnotcoverconditionsormalfunctionsresultingfromnormalwear,neglect,abuse,accidentorrepairsattemptedormadebyotherthanourregionalrepaircentreorauthorisedwarrantyservicecentre.Vanes,gasketsando-ringsareconsiderednormallywearingparts.

THISWARRANTYISINLIEUOFALLOTHEREXPRESSWARRANTIES.ANYWARRANTYOFMERCHANTABILITYORFITNESSFORAPARTICULARPURPOSEISLIMITEDTOTHEDURATIONOFTHISWARRANTY.SIDCHROMESHALLNOTBELIABLEFORANYINCIDENTALORCONSEQUENTIALDAMAGES.

The Stanley® Works Pty Ltd Stanley®Australiamanufacturesandmarketsarangeofpremiumqualityprofessionalhandtoolsandaccessories,

undertheStanley®,Sidchrome®,andABW®brands,whichareguaranteedinaccordancewiththefollowing:Allproductisguaranteedagainstdefectsinworkmanshipandmaterialsandwillberepairedorreplacedfreeofcharge.

ToolCat09

www.sidchrome.com.au

Limited Warranty PeriodElectronicinstruments-6Months.Testinginstrumentsfittedwithameasuringmechanism-6or12Months

dependentonproduct.Proofofpurchasemustbeprovidedwithanyclaimsmadeontheseproducts.Note:Batteriesarenotawarrantableitem.

Don’t use screwdrivers

as chisels

Don’t use chrome

sockets on air impact tools

Don’t use hammers or pipes on spanners

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


In 1843 Frederick T Stanley started a bolt manufacturing business in a one story wooden building in New Britain Connecticut. The Stanley Works soon developed a reputation for innovation, quality and integrity to become the supplier of choice for hinges, bolts and door hardware.

In 1920 the growing company merged with the Stanley Rule & Level Company another New Britain institution, established in 1857 by Frederick’s distant cousin, Henry Stanley. The Stanley Rule & Level Company would become the famous Tool Division of The Stanley Works, producing some of the most innovative and practical tools ever made, including the Bailey plane, the Surform shaper and the Powerlock tape measure.

Today The Stanley Works is a sophisticated multibillion dollar global organisation. Professionals and DIYERS around the world rely on the wide variety of Stanley tools millions of times ever hour.

Even those who don’t use tools regularly rely on Stanley products in more ways than they might realise. Stanley’s wide range of products includes industrial tools, mechanics tools, air tools, hydraulic tools, mirrors, organisers, doors, gates, garage door openers, fastening equipment and of course the hardware that first made Stanley famous.

The long history and outstanding reputation of The Stanley Works has never abandoned the principles established by Frederick Stanley – providing value to customers, treating people with respect, acting with integrity and providing quality products...

The choice of Australian & NZ Mechanic’s since 1942 The Sidchrome brand is an icon in the tool industry in Australia & NZ.

Sidchrome has built its reputation on supplying mechanics with high quality products that last a lifetime. Sidchrome products carry a lifetime warranty against faulty workmanship and materials.

Sidchrome has always been the leader in introducing technology to its tool range. EG: Anti-Slip Design, introduced in 1999. As any mechanic knows, new technologies and business practices have changed the demands of the job. Sidchrome leads the introduction of new mechanics tools technology in the Australian market.

As part of the worldwide Stanley group (acquired in 1990) Sidchrome continues to be an innovator and supplier of leading edge products. With the support of Stanley’s global engineers, designers and state-of-the-art factories, Sidchrome is equipped to effectively meet the specific hand tool requirements of the 21st century mechanic. Whether they be in an Industrial or Automotive environment.

Sidchrome’s extensive range includes: Large Tool Kits, Socket Sets, Spanner/Wrench Sets, Air Tools, Sockets & Socket Accessories, Spanners & Wrenches, Pliers, Hammers, Punches & Chisels, Screwdrivers & Hex Keys, Tool Storage Products

ABW Tools was founded in Brisbane in 1965, in early 2003 Stanley acquired the ABW Company.

ABW products are professional quality specialty tools and are used in the same Industriesas Sidchrome.

ABW product range comprises of:

Automotive Service Tools range includes multimeters, compression testers, feeler gauges, etc

Specialty Tool range includes Pullers, lights, mirrors etcImpact Socket range includes a comprehensive range from 3/8” to 2-1/2”drive

By combining ABW & Sidchrome into the one catalogue we can provide a complete tool offering to the industrial & mechanical industries.

Proto tools was initially established in the USA in 1907 & produced the first ever combination wrench in 1933 - the company was acquired by the Stanley Works in 1984 & the name was changed to Stanley PROTO

The company specialises in the manufacture & supply of a range of hand tools for Industrial, engineering, mining, manufacturing & aerospace applications.

They are recognised by professionals worldwide for their outstanding quality, durability & dependability.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


In 1843 Frederick T Stanley started a bolt manufacturing business in a one story wooden building in New Britain Connecticut. The Stanley Works soon developed a reputation for innovation, quality and integrity to become the supplier of choice for hinges, bolts and door hardware.

In 1920 the growing company merged with the Stanley Rule & Level Company another New Britain institution, established in 1857 by Frederick’s distant cousin, Henry Stanley. The Stanley Rule & Level Company would become the famous Tool Division of The Stanley Works, producing some of the most innovative and practical tools ever made, including the Bailey plane, the Surform shaper and the Powerlock tape measure.

Today The Stanley Works is a sophisticated multibillion dollar global organisation. Professionals and DIYERS around the world rely on the wide variety of Stanley tools millions of times ever hour.

Even those who don’t use tools regularly rely on Stanley products in more ways than they might realise. Stanley’s wide range of products includes industrial tools, mechanics tools, air tools, hydraulic tools, mirrors, organisers, doors, gates, garage door openers, fastening equipment and of course the hardware that first made Stanley famous.

The long history and outstanding reputation of The Stanley Works has never abandoned the principles established by Frederick Stanley – providing value to customers, treating people with respect, acting with integrity and providing quality products...

The choice of Australian & NZ Mechanic’s since 1942 The Sidchrome brand is an icon in the tool industry in Australia & NZ.

Sidchrome has built its reputation on supplying mechanics with high quality products that last a lifetime. Sidchrome products carry a lifetime warranty against faulty workmanship and materials.

Sidchrome has always been the leader in introducing technology to its tool range. EG: Anti-Slip Design, introduced in 1999. As any mechanic knows, new technologies and business practices have changed the demands of the job. Sidchrome leads the introduction of new mechanics tools technology in the Australian market.

As part of the worldwide Stanley group (acquired in 1990) Sidchrome continues to be an innovator and supplier of leading edge products. With the support of Stanley’s global engineers, designers and state-of-the-art factories, Sidchrome is equipped to effectively meet the specific hand tool requirements of the 21st century mechanic. Whether they be in an Industrial or Automotive environment.

Sidchrome’s extensive range includes: Large Tool Kits, Socket Sets, Spanner/Wrench Sets, Air Tools, Sockets & Socket Accessories, Spanners & Wrenches, Pliers, Hammers, Punches & Chisels, Screwdrivers & Hex Keys, Tool Storage Products

ABW Tools was founded in Brisbane in 1965, in early 2003 Stanley acquired the ABW Company.

ABW products are professional quality specialty tools and are used in the same Industriesas Sidchrome.

ABW product range comprises of:

Automotive Service Tools range includes multimeters, compression testers, feeler gauges, etc

Specialty Tool range includes Pullers, lights, mirrors etcImpact Socket range includes a comprehensive range from 3/8” to 2-1/2”drive

By combining ABW & Sidchrome into the one catalogue we can provide a complete tool offering to the industrial & mechanical industries.

Proto tools was initially established in the USA in 1907 & produced the first ever combination wrench in 1933 - the company was acquired by the Stanley Works in 1984 & the name was changed to Stanley PROTO

The company specialises in the manufacture & supply of a range of hand tools for Industrial, engineering, mining, manufacturing & aerospace applications.

They are recognised by professionals worldwide for their outstanding quality, durability & dependability.

Featuring: Torque Plus™ Fastening System

Impact Sockets

Featuring: Torque Plus™ & AntiSlip™ Design

Featuring: Real Tool Count

Tool Kits

Featuring: ARS

Tool Storage

Featuring: Ergonomic Grip Screwdrivers

Fastening

Featuring: World Class Torque Technology

Measuring

Featuring: Heavy Duty Industrial Quality Tools

Pliers & Striking

Featuring: 2 Year Warranty

Air Tools

Featuring: Specialty Mechanical Tools for the Professional

Auto Service Tools

Featuring: PowerDrive®

Spanners & Wrenches

Sockets & Accessories

9

38

46

79

92

110

123

138

144

151

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Chest & Roll Cab Kits Page 10Roller Cabinet Kits Page 14Tool Chest Kits Page 16Tool Chest & Roll Cab Kits Page 18Tool Chest Kits Page 20Tool Chest & Roll Cab Kits Page 22Wall Cabinet Kits Page 24

Tool Chest Kits Page 26Cantilever Kits Page 33Tool Chest Kits Page 34Cantilever Kits Page 36Tool Box Kits Page 37

Wide Body Page 39Tool Chests Page 40Roller Cabinets Page 42Accessories Page 43Tool Chests Page 44Spare Parts Page 45

Socket & Spanner Sets Page 47Mixed Drive & Torx® Sets Page 481/4” Drive Sets Page 503/8” Drive Sets Page 513/8” Drive In-Hex Sets Page 531/2” Drive Sets Page 541/2” Drive In-Hex Sets Page 581/2” Drive Impact Sets Page 593/4” Drive Sets Page 60

3/4” Drive Impact Sets Page 611/4” Drive Socket Accessories Page 621/4” Drive Sockets Page 643/8” Drive Socket Accessories Page 653/8” Drive Sockets Page 681/2” Drive Socket Accessories Page 701/2” Drive Sockets Page 743/4” Drive Socket Accessories Page 763/4” Drive Sockets Page 78

3/8” Drive Impact Sockets Page 801/2” Drive Impact Sockets Page 813/4” Drive Impact Sockets Page 831” Drive Impact Sockets Page 851-1/2” Drive Impact Sockets Page 872-1/2” Drive Impact Sockets Page 88

Combination Sets Page 93Geared Wrench Sets Page 96Ring Spanner Sets Page 98Open End Spanner Sets Page 100Flare Nut Spanner Sets Page 101Combination Spanners Page 102Geared Wrenches Page 103Double Ring Spanners Page 104

Open End & Flare Nut Spanners Page 105Slugging Spanners Page 106Podger Bars Page 107Adjustable Wrenches Page 108Pipe Wrenches Page 109

Tool Kits

Tool Storage


Impact Sockets

Spanners & Wrenches

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Chest & Roll Cab Kits Page 10Roller Cabinet Kits Page 14Tool Chest Kits Page 16Tool Chest & Roll Cab Kits Page 18Tool Chest Kits Page 20Tool Chest & Roll Cab Kits Page 22Wall Cabinet Kits Page 24

Tool Chest Kits Page 26Cantilever Kits Page 33Tool Chest Kits Page 34Cantilever Kits Page 36Tool Box Kits Page 37

Wide Body Page 39Tool Chests Page 40Roller Cabinets Page 42Accessories Page 43Tool Chests Page 44Spare Parts Page 45

Socket & Spanner Sets Page 47Mixed Drive & Torx® Sets Page 481/4” Drive Sets Page 503/8” Drive Sets Page 513/8” Drive In-Hex Sets Page 531/2” Drive Sets Page 541/2” Drive In-Hex Sets Page 581/2” Drive Impact Sets Page 593/4” Drive Sets Page 60

3/4” Drive Impact Sets Page 611/4” Drive Socket Accessories Page 621/4” Drive Sockets Page 643/8” Drive Socket Accessories Page 653/8” Drive Sockets Page 681/2” Drive Socket Accessories Page 701/2” Drive Sockets Page 743/4” Drive Socket Accessories Page 763/4” Drive Sockets Page 78

3/8” Drive Impact Sockets Page 801/2” Drive Impact Sockets Page 813/4” Drive Impact Sockets Page 831” Drive Impact Sockets Page 851-1/2” Drive Impact Sockets Page 872-1/2” Drive Impact Sockets Page 88

Combination Sets Page 93Geared Wrench Sets Page 96Ring Spanner Sets Page 98Open End Spanner Sets Page 100Flare Nut Spanner Sets Page 101Combination Spanners Page 102Geared Wrenches Page 103Double Ring Spanners Page 104

Open End & Flare Nut Spanners Page 105Slugging Spanners Page 106Podger Bars Page 107Adjustable Wrenches Page 108Pipe Wrenches Page 109

Tool Kits

Tool Storage


Impact Sockets

Spanners & Wrenches

Screwdrivers Page 111Ratcheting Screwdrivers Page 112Impact Drivers & Hex Key Sets Page 113T-Handle Hex Keys Page 114Torx® Page 115Scribers, Pick & Hook Sets Page 117Inspection Mirrors & Lights Page 118

Magnetic Pick-up Tools Page 119Thread Maintenance Page 121

Pliers Page 124Locking Pliers Page 126Punch & Chisel Sets Page 129Punch Sets Page 130Hollow Punch Sets Page 133Cold Chisel Sets Page 134Punches & Chisels Page 135

Hammers Page 136Pry Bars Page 136

Micrometer & Veniers Page 139Torque Wrench – Deflecting Beam Page 142Torque Wrench – Micrometer Page 143

Drills Page 145Grinders, Sanders, Hammers Page 146Ratchets Page 147Impact Page 148

Diagnostic Instruments Page 152Tune Up & Electrical Page 157Battery Service Tools Page 162Fuel Injection Page 163Cooling System Page 166Engine Service & Repair Page 172Diesel Compression Testing Adaptors Page 176Engine Service & Repair Page 177

Brake Page 186Drive-train & Body Page 193

Fastening

Pliers & Striking

Measuring

Air Tools

Auto Service Tools

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Sidchrome Anti-Slip Design™ drives off fastener body, more easily removing

damaged fasteners.

The arched surface of the Sidchrome ASD spanner

(wrench) spreads theforce over a 400% larger contact area, prolonging

fastener life.

The Sidchrome ASD spanner (wrench) has a

locking groove to prevent slipping.

The revolutionary new Sidchrome ASD Spanner (Wrench)

Sidchrome SolutionsCommon Spanner (Wrench) Problems

Traditional spanners (wrenches) often slip,

causing fastener damage and knuckle injury.

Removing rounded fasteners is difficult due to

lack of contact.

Traditional spanners (wrenches) often damage

fasteners by concentrating forces at the corners via point-to-point contact.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Sidchrome Anti-Slip Design™ drives off fastener body, more easily removing

damaged fasteners.

The arched surface of the Sidchrome ASD spanner

(wrench) spreads theforce over a 400% larger contact area, prolonging

fastener life.

The Sidchrome ASD spanner (wrench) has a

locking groove to prevent slipping.

The revolutionary new Sidchrome ASD Spanner (Wrench)

Sidchrome SolutionsCommon Spanner (Wrench) Problems

Traditional spanners (wrenches) often slip,

causing fastener damage and knuckle injury.

Removing rounded fasteners is difficult due to

lack of contact.

Traditional spanners (wrenches) often damage

fasteners by concentrating forces at the corners via point-to-point contact.

Tool Kits

Always Wear Eye Protection Page 9

Featuring: Real Tool Count Where the only tools we count are real professional quality tools.

Sidchrome Tool KitsCan be logically and easily built up. Sidchrome Tool Kits comprise of the most popular tools in the section of the range. If a tool is lost or damaged you can buy the individual item for quick, easy replacement. Comprehensive range of combination Metric-AF sets. Multi-choice of innovative storage systems. Premium Quality Tools: forged from special alloy steel and heat treated for maximum strength and durability. The range of sets will appeal to the apprentice through to the industrial user or professional mechanic wanting to fully kit out a workshop or site.

Safety• Use safety goggles. Serious eye injury is possible.

• Do not use extenders or cheater bars.• Pull hand tools toward you. Do not push.

• Maintain your balance.• Prevent slipping. Keep tools clean.

• Do not open more than one tool box drawer at a time.• Push tool cabinets. Do not pull.

Sidchrome Real Tool CountSidchrome Tool kits feature: RTC “REAL TOOL COUNT” where the only tools that go into a kit are professional quality tools - not piece count boosters!

Sidchrome Torque PlusAll standard and deep hand sockets feature the TORQUEPLUS™ fastening system. This unique system allows greater contact with the flats of fasteners, providing greater torque to enable easier fastening.

Conventional sockets damage fasteners by concentrating forces on the corners. Sidchrome TORQUEPLUS™ sockets spread the force over a larger contact area, reducing rounding off and extending fastener life. Sidchrome TORQUEPLUS™ sockets are particularly useful on worn or rounded fasteners.

All ring spanners and the ring end of Combination Ring and Open End Spanners (up to 32mm/1-1/4”) incorporate the TORQUEPLUSTM fastening system. This unique system allows greater contact with the flats of fasteners, providing greater torque to make tightening easier.

Conventional Spanners damage fasteners by concentrating forces on the corners. Sidchrome TORQUEPLUSTM spanners spread force over a larger contact area, reducing rounding off and extending fastener life. Sidchrome TORQUEPLUSTM spanners are particularly useful on worn or rounded fasteners.

Sidchrome Anti SlipSidchrome Open End Spanners and the open end of the Combination Ring & Open End Spanners (up to 32mm/1-1/4”) feature the innovative ANTI-SLIP DESIGN™. ANTI-SLIP DESIGN™ features a locking groove to prevent slippage and knuckle injury. The unique arc design increases surface contact by over 400%. This means increased torque is applied to the fastener resulting in fewer rounded fasteners meaning the job is faster and safer.

Sidchrome Tool Selection SolutionSidchrome Tool kits feature: TSS “TOOL SELECTION SOLUTION” where the majority of your tools have a permanent place in your cabinet. This allows for easy access to your tools and also allows you to also quickly see if tools are missing from your kit.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits

Always Wear Eye ProtectionPage 10

Tool

Che

st &

Rol

l Cab

Kits

Tool Chest & Roll Cab Kits

PART No: 10100

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Tool

Che

st &

Rol

l Cab

Kits


PART No: 10100

Tool Kits



PART No: 10100

508 Piece Metric & AF Tool Kit

1/4" Drive Sockets & Accessories

20 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mmDeep: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm18 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"Deep: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"5 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmAdjustable Offset Handle, 145mmUniversal Joint

1/4 & 3/8" Drive Tru-Torque (Torx) Sockets

4 Tru-Torque Sockets 1/4" DriveS-10, S-15, S-20, S-256 Tru-Torque Sockets 3/8" DriveS-27, S-30, S-40, S-45, S-50, S-55


28 Metric SocketsStandard: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm20 AF SocketsStandard: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8"Deep: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4"Spark Plug: 5/8 & 13/16"8 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 75mmExtension, Male & Female, 150mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmUniversal JointAdaptor, 3/8" Female to 1/4" MaleAdaptor, 3/8" Female to 1/2" Male


29 Metric SocketsStandard: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm24 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4"Deep: 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”Spark Plug: 5/8 & 13/16"11 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmExtension, Male & Female, 500mmAdjustable Offset Handle, 220mmAdjustable Offset Handle, 375mmAdjustable Offset Handle, 450mmSliding T Handle, 240mmSpeed Brace, 420mmEll Handle, 190mmUniversal Joint, Ball Type

1/2" Drive Inhex & Spline Sockets

9 Metric Inhex SocketsShort: 6, 7, 8, 10, 12, 14, 17mm Long: 8 & 10mm9 AF Inhex SocketsShort: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16, 5/8”4 Spline SocketsShort: M6 Long: M8, M10, M12

1/2" Drive Impact Sockets

10 Metric Standard Impact Sockets10, 11, 12, 13, 14, 17, 19, 21, 22, 24mm10 AF Standard Impact Sockets7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4, 13/16, 7/8, 15/16, 1”

Ring & Open End Spanners

21 Metric Spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32, 36mm20 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2”

Geared Wrenches – Stubby

10 Metric Wrenches10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm7 AF Wrenches3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”

Ring Spanners

11 Metric Spanners 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27, 30 x 32mm8 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1", 1-1/8 x 1-1/4"

Half Moon Ring Spanners

11 x 13mm, 14 x 16mm, 7/16 x 1/2", 1/2 x 9/16", 9/16 x 5/8"

Open End Spanners

11 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27, 30 x 32mm9 AF Spanners1/4 x 5/16, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1", 1-1/8 x 1-1/4"

Flare Nut Spanners

5 Metric Spanners 10 x 11, 12 x 13, 13 x 14, 15 x 17, 19 x 22mm4 AF Spanners3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 3/4 x 7/8"

Screwdrivers

Phillips Tip: 75mm x #0, 75mm x #1, 40mm x #2, 100mm x #2, 200mm x #2, 150mm x #3Standard Tip: 75 x 3.2mm, 100 x 4.75mm, 150 x 4.75mm, 200 x 4.75mm, 40 x 6.35mm, 100 x 6.35mm, 250 x 6.35mm, 150 x 7.9mm, 200 x 9.5mm, 300 x 12mm

Hex Keys – Long Ball Point

9 Metric Hex Keys1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm9 AF Hex Keys5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"

T Handle Hex Keys

8 Metric T Handle Hex Keys2, 2.5, 3, 4, 5, 6, 8, 10mm8 AF T Handle Hex Keys3/32, 1/8, 5/32, 3/16, 7/32,1/4, 5/16, 3/8"

Punches & Cold Chisels

9 Centre Punches2, 2.5, 3, 4, 5, 6.5, 8, 10, 12mm6 Starter Drift Punches2, 3, 5, 6.5, 8, 10mm9 Pin PunchesShort Series: 2, 2.5, 3mmLong Series: 4 5, 6, 6.5, 8, 10mm5 Cold Chisels12, 16, 19, 22, 25mm

Adjustable Wrenches 100, 150, 200, 250, 300, 375mm

Pliers

Multigrips 165, 250, 255, 375mmCombination Pliers 160, 200mmElectricians Plier 220mmDiagonal Cutting Pliers 140, 200mmLong Nose Pliers 140, 200mmSnap Ring Pliers: Internal Straight, Internal Bent, External Straight, External Bent, Flag TipLocking 175, 240mmEnd Nipper 210mmElectronic Mini Pliers: Needle Nose, Bent Needle Nose, Round Nose, Flat Nose, Diagonal Cutting, Multi Purpose

Ball Pein Hammers 225, 450, 680g

Hacksaw 300mm

Torque Wrench 1⁄2” Drive 40-200Nm (30-150 ft/lb)

Feeler Gauge Set

Circuit Tester

Strap Wrench

Telescopic Inspection Mirror

Telescopic Magnet

Pry Bar Set – 4 Piece

Mechanics Bit Set – 42 Piece

Mini Pick & Hook Set – 4 Piece

Tape Rule 8M/26’

Trimming Knife

Precision Screwdriver Set – 6 Piece

Steel Rules 150mm/6”, 300mm/12”

10 Drawer Tool Chest

Heavy Duty, Ball Bearing Drawer SlidesW663 x D406 x H490mm

7 Drawer Roller Cabinet


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Tool

Che

st &

Rol

l Cab

Kits

PART No: 10143

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Tool

Che

st &

Rol

l Cab

Kits

PART No: 10143

Tool Kits



Feeler Gauge Set

Circuit Tester

Strap Wrench


Telescopic Magnet




Tape Rule 8M/26’

Trimming Knife


Steel Rules 150mm/6”, 300mm/12”





PART No: 10143



7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1⁄4, 9/32, 5/16, 11/32, 3/8”1 Socket AccessorySocket Driver, 150mm


8 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 17, 19mm9 AF SocketsStandard: 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”Spark Plug: 5/8 & 13/16”6 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female 75mmExtension, Male & Female 150mmAdjustable Offset Handle, 220mmUniversal JointAdaptor 3/8” Female to 1⁄4” Male


29 Metric SocketsStandard: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm24 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4"Deep: 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”Spark Plug: 5/8 & 13/16"8 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmAdjustable Offset Handle, 375mmSliding T Handle, 240mmSpeed Brace, 420mmUniversal Joint, Ball Type


9 Metric Inhex SocketsShort: 6, 7, 8, 10, 12, 14, 17mm Long: 8 & 10mm9 AF Inhex SocketsShort: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16, 5/8”4 Spline SocketsShort: M6 Long: M8, M10, M12




14 Metric Spanners6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm13 AF Spanners1⁄4, 5/16, 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4, 13/16, 7/8, 15/16, 1”


10 Metric Wrenches10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm7 AF Wrenches3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”

Ring Spanners


Open End Spanners


Flare Nut Spanners


Screwdrivers

Phillips Tip: 75mm x #0, 75mm x #1, 40mm x #2, 100mm x #2, 150mm x #3Standard Tip: 75 x 3.2mm, 100 x 4.75mm,40 x 6.35mm, 100 x 6.35mm, 150 x 7.9mm



T Handle Hex Keys

8 Metric T Handle Hex Keys2, 2.5, 3, 4, 5, 6, 8, 10mm8 AF T Handle Hex Keys3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"


5 Centre Punches2, 2.5, 3, 4, 5mm6 Starter Drift Punches2, 3, 5, 6.5, 8, 10mm9 Pin PunchesShort Series: 2, 2.5, 3mmLong Series: 4, 5, 6, 6.5, 8, 10mm3 Cold Chisels12, 19, 25mm

Adjustable Wrenches 150, 200, 300, 375mm

Pliers

Multigrips 165, 250, 375mmCombination Pliers 200mmDiagonal Cutting Pliers 200mmLong Nose Pliers 200mmSnap Ring Pliers: Internal Straight, External StraightLocking 240mm

Ball Pein Hammers 225, 680g

Hacksaw 300mm

Torque Wrench 1 ⁄ 2” Drive 40-200Nm (30-150 ft/lb)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Rolle

r Cab

inet

Kits

Roller Cabinet Kits

PART No: 10146

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Rolle

r Cab

inet

Kits

Roller Cabinet Kits

PART No: 10146

Tool Kits


Roller Cabinet Kits

PART No: 10146

343 Piece Metric & AF Tool Kit1/4" Drive Sockets & Accessories

20 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mmDeep: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm18 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"Deep: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"5 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmAdjustable Offset Handle, 145mmUniversal Joint


28 Metric SocketsStandard: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm20 AF SocketsStandard: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8"Deep: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4"Spark Plug: 5/8 & 13/16"8 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 75mmExtension, Male & Female, 150mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmUniversal JointAdaptor, 3/8" Female to 1/4" MaleAdaptor, 3/8" Female to 1/2" Male


19 Metric SocketsStandard: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4"Spark Plug: 5/8 & 13/16"8 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmAdjustable Offset Handle, 375mmSliding T Handle, 240mmSpeed Brace, 420mmUniversal Joint, Ball Type


9 Metric Inhex SocketsShort: 6, 7, 8, 10, 12, 14, 17mm Long: 8 & 10mm4 Spline SocketsShort: M6 Long: M8, M10, M129 AF Inhex SocketsShort: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16, 5/8"


14 Metric Spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm13 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1"


10 Metric Wrenches 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm7 AF Wrenches3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”

Ring Spanners


Half Moon Ring Spanners

11 x 13mm, 14 x 16mm, 7/16 x 1/2", 1/2 x 9/16", 9/16 x 5/8"

Open End Spanners


Flare Nut Spanners


Screwdrivers

Phillips Tip: 75mm x #0, 75mm x #1, 40mm x #2, 100mm x #2, 150mm x #3Standard Tip: 75 x 3.2mm, 100 x 4.75mm, 40 x 6.35mm, 100 x 6.35mm, 150 x 7.9mm




5 Centre Punches2, 2.5, 3, 4, 5mm6 Starter Drift Punches2, 3, 5, 6.5, 8, 10mm9 Pin PunchesShort Series: 2, 2.5, 3mmLong Series: 4, 5, 6, 6.5, 8, 10mm5 Cold Chisels12, 16, 19, 22, 25mm

Adjustable Wrenches 150, 200, 300mm

Pliers

Multigrips 165, 250mmCombination Pliers 200mmDiagonal Cutting Pliers 200mmLong Nose Pliers 200mmSnap Ring Pliers: Internal Straight, External StraightLocking 240mmEnd Nipper 210mm

Ball Pein Hammer 680g

Hacksaw 300mm

Feeler Gauge Set

Circuit Tester

Strap Wrench


Telescopic Magnet


Tape Rule 8M/26’

Trimming Knife

Steel Rules 150mm/6", 300mm/12”

13 Drawer Widebody Roller Cabinet


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Tool

Che

st K

its

Tool Chest Kits

PART No: 10114

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Tool

Che

st K

its

Tool Chest Kits

PART No: 10114

Tool Kits


Tool Chest Kits

PART No: 10114

343 Piece Metric & AF Tool Kit1/4" Drive Sockets & Accessories20 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mmDeep: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm18 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"Deep: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"5 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmAdjustable Offset Handle, 145mmUniversal Joint

3/8" Drive Sockets & Accessories28 Metric SocketsStandard: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm20 AF SocketsStandard: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8"Deep: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4"Spark Plug: 5/8 & 13/16"8 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 75mmExtension, Male & Female, 150mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmUniversal JointAdaptor, 3/8" Female to 1/4" MaleAdaptor, 3/8" Female to 1/2" Male

1/2" Drive Sockets & Accessoriess19 Metric SocketsStandard: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4"Spark Plug: 5/8 & 13/16"8 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmAdjustable Offset Handle, 375mmSliding T Handle, 240mmSpeed Brace, 420mmUniversal Joint, Ball Type

1/2" Drive Inhex & Spline Sockets9 Metric Inhex SocketsShort: 6, 7, 8, 10, 12, 14, 17mm Long: 8 & 10mm4 Spline SocketsShort: M6 Long: M8, M10, M129 AF Inhex SocketsShort: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16, 5/8"

Ring & Open End Spanners14 Metric Spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm13 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1"

Geared Wrenches – Stubby10 Metric Wrenches 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm7 AF Wrenches3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”

Ring Spanners11 Metric Spanners 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27, 30 x 32mm8 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1", 1-1/8 x 1-1/4"

Half Moon Ring Spanner11 x 13mm, 14 x 16mm, 7/16 x 1/2", 1/2 x 9/16", 9/16 x 5/8"

Open End Spanners11 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27, 30 x 32mm9 AF Spanners1/4 x 5/16, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1", 1-1/8 x 1-1/4"

Flare Nut Spanners5 Metric Spanners 10 x 11, 12 x 13, 13 x 14, 15 x 17, 19 x 22mm4 AF Spanners3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 3/4 x 7/8"

ScrewdriversPhillips Tip: 75mm x #0, 75mm x #1, 40mm x #2, 100mm x #2, 150mm x #3Standard Tip: 75 x 3.2mm, 100 x 4.75mm, 40 x 6.35mm, 100 x 6.35mm, 150 x 7.9mm

Hex Keys – Long Ball Point9 Metric Hex Keys1.5, 2, 2.5, 3, 4, 5, 6, 8 10mm9 AF Hex Keys5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"

Punches & Cold Chisels5 Centre Punches2, 2.5, 3, 4, 5mm6 Starter Drift Punches2, 3, 5, 6.5, 8, 10mm9 Pin PunchesShort Series: 2, 2.5, 3mmLong Series: 4, 5, 6, 6.5, 8, 10mm5 Cold Chisels12, 16, 19, 22, 25mm

Adjustable Wrench 150, 200, 300mmPliersMultigrips 165, 250mmCombination Pliers 200mmDiagonal Cutting Pliers 200mmLong Nose Pliers 200mmSnap Ring Pliers: Internal Straight, External StraightLocking 240mmEnd Nipper 210mm

Ball Pein Hammer 450gHacksaw 300mm

Feeler Gauge Set

Circuit Tester

Strap Wrench


Telescopic Magnet


Tape Rule 8M/26’

Trimming Knife



Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Tool

Che

st &

Rol

l Cab

Kits


PART No: 10144

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Tool

Che

st &

Rol

l Cab

Kits


PART No: 10144

Tool Kits



PART No: 10144



7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1⁄4, 9/32, 5/16, 11/32, 3/8”1 Socket AccessorySocket Driver, 150mm


8 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 17, 19mm9 AF SocketsStandard: 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”Spark Plug: 5/8 & 13/16”6 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female 75mmExtension, Male & Female 150mmAdjustable Offset Handle, 220mmUniversal JointAdaptor 3/8” Female to 1⁄4” Male


29 Metric SocketsStandard: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm24 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4"Deep: 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”Spark Plug: 5/8 & 13/16"5 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 375mmUniversal Joint, Ball Type




10 Metric Spanners8, 10, 11, 12, 13, 14, 16, 17, 18, 19mm10 AF Spanners1⁄4, 5/16, 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4, 15/16”

Ring Spanners

7 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm6 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4, 13/16 x 7/8"

Flare Nut Spanners

5 Metric Spanners10 x 11, 12 x 13, 13 x 14, 15 x 17, 19 x 22mm4 AF Spanners3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 3/4 x 7/8"

Screwdrivers

Phillips Tip: 75mm x #0, 75mm x #1, 40mm x #2, 100mm x #2, 150mm x #3Standard Tip: 75 x 3.2mm, 100 x 4.75mm,40 x 6.35mm, 100 x 6.35mm, 150 x 7.9mm



T Handle Hex Keys



4 Centre Punches3, 4, 5, 6.5mm 4 Long Pin Punches3, 4, 5, 6mm 2 Starter Drift Punches3 & 5mm3 Cold Chisels12, 19, 25mm


Pliers

Multigrips 250, 375mmCombination Pliers 200mmDiagonal Cutting Pliers 200mmLong Nose Pliers 200mmSnap Ring Pliers: Internal Straight, External StraightLocking 240mm


Hacksaw 300mm


Feeler Gauge Set

Circuit Tester

Strap Wrench


Telescopic Magnet




Trimming Knife


Steel Rule 300mm/12”

8 Drawer Tool Chest




Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Tool

Che

st K

its

Tool Chest Kits

PART No: 10119

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Tool

Che

st K

its

Tool Chest Kits

PART No: 10119

Tool Kits


Tool Chest Kits

PART No: 10119

265 Piece Metric & AF Tool Kit1/4" Drive Sockets & Accessories7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1⁄4, 9/32, 5/16, 11/32, 3/8”1 Socket AccessorySocket Driver, 150mm

3/8" Drive Sockets & Accessories8 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 17, 19mm9 AF SocketsStandard: 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”Spark Plug: 5/8 & 13/16”6 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female 75mmExtension, Male & Female 150mmAdjustable Offset Handle, 220mmUniversal JointAdaptor 3/8” Female to 1⁄4” Male

1/2" Drive Sockets & Accessoriess19 Metric SocketsStandard: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4"Spark Plug: 5/8 & 13/16"8 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmAdjustable Offset Handle, 375mmSliding T Handle, 240mmSpeed Brace, 420mmUniversal Joint, Ball Type

1/2" Drive Inhex & Spline Sockets9 Metric Inhex SocketsShort: 6, 7, 8, 10, 12, 14, 17mm Long: 8 & 10mm4 Spline SocketsShort: M6 Long: M8, M10, M129 AF Inhex SocketsShort: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16, 5/8"

Ring & Open End Spanners14 Metric Spanners6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm13 AF Spanners1⁄4, 5/16, 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4, 13/16, 7/8, 15/16, 1”

Geared Wrenches – Stubby10 Metric Wrenches10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm7 AF Wrenches3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”

Ring Spanners11 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27, 30 x 32mm8 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1", 1-1/8 x 1-1/4"


Flare Nut Spanners5 Metric Spanners 10 x 11, 12 x 13, 13 x 14, 15 x 17, 19 x 22mm4 AF Spanners3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 3/4 x 7/8"


Hex Keys – Long Ball Point9 Metric Hex Keys1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm9 AF Hex Keys5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"

Punches & Cold Chisels5 Centre Punches2, 2.5, 3, 4, 5mm6 Starter Drift Punches2, 3, 5, 6.5, 8, 10mm9 Pin PunchesShort Series: 2, 2.5, 3mmLong Series: 4, 5, 6, 6.5, 8, 10mm3 Cold Chisels12, 19, 25mm

Adjustable Wrench 150, 200, 300mmPliersMultigrips 165, 250mmCombination Pliers 200mmDiagonal Cutting Pliers 200mmLong Nose Pliers 200mmSnap Ring Pliers: Internal Straight, External StraightLocking 240mm


Hacksaw 300mm

Feeler Gauge Set

Circuit Tester

Tape Rule 8M/26’

Trimming Knife



Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Tool

Che

st &

Rol

l Cab

Kits


PART No: 10145

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Tool

Che

st &

Rol

l Cab

Kits


PART No: 10145

Tool Kits



PART No: 10145



7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1⁄4, 9/32, 5/16, 11/32, 3/8”4 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmUniversal Joint


25 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 27mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm20 AF SocketsStandard: 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4, 13/16, 7/8, 15/16, 1”Deep: 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”Spark Plug: 5/8 & 13/16”5 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmSliding T Handle, 240mmUniversal Joint, Ball Type




10 Metric Spanners8, 10, 11, 12, 13, 14, 16, 17, 18, 19mm10 AF Spanners1⁄4, 5/16, 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4, 15/16”

Screwdrivers

Phillips Tip: 75mm x #1, 40mm x #2, 100mm x #2Standard Tip: 75 x 3.2mm, 100 x 4.75mm, 100 x 6.35mm, 150 x 7.9mm



T Handle Hex Keys



4 Centre Punches3, 4, 5, 6.5mm 4 Long Pin Punches3, 4, 5, 6mm 2 Starter Drift Punches3 & 5mm3 Cold Chisels12, 19, 25mm


Pliers

Multigrips 250, 375mmCombination Pliers 200mmDiagonal Cutting Pliers 200mmLong Nose Pliers 200mmLocking 240mm


Hacksaw 300mm


Strap Wrench


Telescopic Magnet




Trimming Knife


Steel Rule 300mm/12”

6 Drawer Tool Chest




Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Wal

l Cab

inet

Kits

Wall Cabinet Kits

PART No: 10105

205 Piece Metric & AFTool Cabinet1/2" Drive Sockets & Accessories20 Metric SocketsStandard: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 30, 32mm17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4”Spark Plug: 5/8 & 13/16”10 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmExtension, Male & Female, 500mmAdjustable Offset Handle, 220mmAdjustable Offset Handle, 375mmSliding T Handle, 240mmSpeed Brace, 420mmUniversal Joint, Ball Type

1/2" Drive Inhex Sockets7 Metric Inhex SocketsShort: 6, 7, 8, 10, 12, 14, 17mm9 AF Inhex SocketsShort: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16, 5/8”

Ring & Open End Spanners10 Metric Spanners8, 10, 11, 12, 13, 14, 16, 17, 18, 19mm10 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 15/16”




ScrewdriversPhillips Tip: 75mm x #0, 75mm x #1, 40mm x #2, 200mm x #2Standard Tip: 75 x 3.2mm, 100 x 4.75mm,200 x 4.75mm, 40 x 6.35mm, 100 x 6.35mm


Punches & Cold Chisels4 Centre Punches3, 4, 5, 6.5mm4 Long Pin Punches3, 4, 5, 6mm2 Starter Drift Punches3, 5mm3 Cold Chisels12, 19, 25mm

Adjustable Wrench 150, 300mmPliersMultigrips 255mmCombination Pliers 200mmDiagonal Cutting Pliers 200mmLong Nose Pliers 200mmSnap Ring Pliers: Internal Straight, External StraightLocking 240mm


Hacksaw 300mm

Feeler Gauge Set

Circuit Tester

Tape Rule 8M/26’

Ratchet Screwdriver & Bit Set- 11 Piece

2 Drawer Wall Cabinet

745 x 210 x 880mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Wal

l Cab

inet

Kits

Wall Cabinet Kits

PART No: 10105

205 Piece Metric & AFTool Cabinet1/2" Drive Sockets & Accessories20 Metric SocketsStandard: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 30, 32mm17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4”Spark Plug: 5/8 & 13/16”10 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmExtension, Male & Female, 500mmAdjustable Offset Handle, 220mmAdjustable Offset Handle, 375mmSliding T Handle, 240mmSpeed Brace, 420mmUniversal Joint, Ball Type

1/2" Drive Inhex Sockets7 Metric Inhex SocketsShort: 6, 7, 8, 10, 12, 14, 17mm9 AF Inhex SocketsShort: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16, 5/8”

Ring & Open End Spanners10 Metric Spanners8, 10, 11, 12, 13, 14, 16, 17, 18, 19mm10 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 15/16”









Hacksaw 300mm

Feeler Gauge Set

Circuit Tester

Tape Rule 8M/26’

Ratchet Screwdriver & Bit Set- 11 Piece


745 x 210 x 880mm

Tool Kits


Wall Cabinet Kits

PART No: 10107

194 Piece Metric & AFTool Cabinet1/4" Drive Sockets & Accessories10 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm9 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"4 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmAdjustable Offset Handle, 145mm

1/2" Drive Sockets & Accessoriess20 Metric SocketsStandard: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 30, 32mm17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4”Spark Plug: 5/8 & 13/16”10 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmExtension, Male & Female, 500mmAdjustable Offset Handle, 220mmAdjustable Offset Handle, 375mmSliding T Handle, 240mmSpeed Brace, 420mmUniversal Joint, Ball Type

Ring & Open End Spanners14 Metric Spanners6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm10 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 15/16”


Ring Spanners7 Metric Spanners 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm6 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4, 13/16 x 7/8"

Open End Spanners8 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22mm7 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1"






Hacksaw 300mm

Feeler Gauge Set

Circuit Tester

Tape Rule 8M/26’


745 x 210 x 880mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Tool

Che

st K

its

PART No: 10115

181 Piece Metric & AF Tool Kit1/4" Drive Sockets & Accessories10 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm9 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"4 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmAdjustable Offset Handle, 145mm

1/2" Drive Sockets & Accessoriess19 Metric SocketsStandard: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4"Spark Plug: 5/8 & 13/16"5 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 375mmUniversal Joint, Ball Type

Ring & Open End Spanners10 Metric Spanners 8, 10, 11, 12, 13, 14, 16, 17, 18, 19mm10 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 15/16"







Centre: 3, 4, 5, 6.5mm Long Pin: 3, 4, 5, 6mm Starter Drift: 3 & 5mm



Hacksaw 300mm

Feeler Gauge Set

Circuit Tester

9 Drawer Tool Chest


Tool Chest Kits

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Tool

Che

st K

its

PART No: 10115

181 Piece Metric & AF Tool Kit1/4" Drive Sockets & Accessories10 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm9 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"4 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmAdjustable Offset Handle, 145mm

1/2" Drive Sockets & Accessoriess19 Metric SocketsStandard: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4"Spark Plug: 5/8 & 13/16"5 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 375mmUniversal Joint, Ball Type








Centre: 3, 4, 5, 6.5mm Long Pin: 3, 4, 5, 6mm Starter Drift: 3 & 5mm



Hacksaw 300mm

Feeler Gauge Set

Circuit Tester

9 Drawer Tool Chest


Tool Chest Kits

Tool Kits


Tool Chest Kits

PART No: 10133

176 Piece Metric & AF Apprentice Tool Kit1/4" Drive Sockets & Accessories7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1⁄4, 9/32, 5/16, 11/32, 3/8”1 Socket AccessorySocket Driver, 150mm


1/2" Drive Sockets & Accessoriess19 Metric SocketsStandard: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4" Spark Plug: 5/8 & 13/16"5 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 375mmUniversal Joint, Ball Type

Ring & Open End Spanners10 Metric Spanners 8, 10, 11, 12, 13, 14, 16, 17, 18, 19mm10 AF Spanners1⁄4, 5/16, 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3⁄4, 15/16”

Ring Spanners7 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm6 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4, 13/16 x 7/8"

Flare Nut Spanners5 Metric Spanners10 x 11, 12 x 13, 13 x 14, 15 x 17, 19 x 22mm4 AF Spanners3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 3/4 x 7/8"



Punches & Cold Chisels4 Centre Punches: 3, 4, 5, 6.5mm 4 Long Pin Punches: 3, 4, 5, 6mm 2 Starter Drift Punches: 3 & 5mm3 Cold Chisels: 12, 19, 25mm



Hacksaw 300mm

Feeler Gauge Set

Circuit Tester

8 Drawer Tool Chest


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Tool

Che

st K

its

PART No: 10121

164 Piece Metric & AF Tool Kit1/2" Drive Sockets & Accessories19 Metric SocketsStandard: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4"Spark Plug: 5/8 & 13/16"5 Socket AccessoriesRatchet, Reversible Male, 250mm Extension, Male & Female, 125mm Extension, Male & Female, 250mm Adjustable Offset Handle, 375mm Universal Joint, Ball Type


Ring Spanners11 Metric Spanners 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27, 30 x 32mm8 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/ 16 x 3/4, 13/16 x 7/8, 15/16 x 1", 1-1/8 x 1-1/4"





4 Centre Punches3, 4, 5, 6.5mm4 Long Pin Punches3, 4, 5, 6mm2 Starter Drift Punches3, 5mm3 Cold Chisels12, 19, 25mm

Adjustable Wrench 150, 200, 300mm

PliersMultigrips 165, 250mmCombination Pliers 200mmDiagonal Cutting Pliers 200mmLong Nose Pliers 200mmSnap Ring Pliers: Internal Straight, External StraightLocking 240mm


Hacksaw 300mm

Feeler Gauge Set

Circuit Tester



Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Tool

Che

st K

its

PART No: 10121



Ring Spanners11 Metric Spanners 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27, 30 x 32mm8 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/ 16 x 3/4, 13/16 x 7/8, 15/16 x 1", 1-1/8 x 1-1/4"






Adjustable Wrench 150, 200, 300mm

PliersMultigrips 165, 250mmCombination Pliers 200mmDiagonal Cutting Pliers 200mmLong Nose Pliers 200mmSnap Ring Pliers: Internal Straight, External StraightLocking 240mm


Hacksaw 300mm

Feeler Gauge Set

Circuit Tester



Tool Kits


Tool Chest Kits

PART No: 10122





ScrewdriversPhillips Tip: 75mm x #1, 40mm x #2, 100mm x #2Standard Tip: 75 x 3.2mm, 100 x 4.75mm, 100 x 6.35mm, 150 x 7.9mm




Adjustable Wrench 150, 300mm

PliersMultigrips 250mmCombination Pliers 200mmDiagonal Cutting Pliers 200mmLong Nose Pliers 200mmLocking 240mm


Hacksaw 300mm

8 Drawer Tool Chest


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Tool

Che

st K

its

PART No: 10127

126 Piece Metric & AF Tool Kit1/4" Drive Sockets & Accessories7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1⁄4, 9/32, 5/16, 11/32, 3/8”4 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmUniversal Joint

1/2" Drive Sockets & Accessories15 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 27mm13 AF SocketsStandard: 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4, 13/16, 7/8, 15/16, 1”Spark Plug: 5/8 & 13/16”5 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmSliding T Handle, 240mmUniversal Joint







Adjustable Wrench 250mm



Hacksaw 300mm

3 Drawer Tool Chest


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Tool

Che

st K

its

PART No: 10127












Hacksaw 300mm

3 Drawer Tool Chest


Tool Kits


Tool Chest Kits

PART No: 10131








Adjustable Wrench 150, 300mmPliersMultigrips 250mmCombination Pliers 200mmDiagonal Cutting Pliers 200mmLong Nose Pliers 200mmLocking 240mm


Hacksaw 300mm

6 Drawer Tool Chest


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Tool

Che

st K

its

PART No: 10212

118 Piece Metric Tool Kit1/4" Drive Sockets & Accessories20 SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mmDeep: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm4 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmUniversal Joint

3/8" Drive Sockets & Accessories27 Metric SocketsStandard: Standard: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18mm6 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 75mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmUniversal JointAdaptor 3/8”Female to ¼”Male

Ring Spanners7 Spanners 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm


10 Spanners8, 10, 11, 11, 12, 13, 14, 16, 17, 18, 19mm

Flare Nut Spanners

5 Spanners10 x 11, 12 x 13, 13 x 14, 15 x 17, 19 x 22mm



9 Hex Keys1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm





Hacksaw 300mm

6 Drawer Tool Chest


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Tool

Che

st K

its

PART No: 10212

118 Piece Metric Tool Kit1/4" Drive Sockets & Accessories20 SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mmDeep: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm4 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmUniversal Joint

3/8" Drive Sockets & Accessories27 Metric SocketsStandard: Standard: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18mm6 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 75mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmUniversal JointAdaptor 3/8”Female to ¼”Male

Ring Spanners7 Spanners 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm


10 Spanners8, 10, 11, 11, 12, 13, 14, 16, 17, 18, 19mm

Flare Nut Spanners




9 Hex Keys1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm





Hacksaw 300mm

6 Drawer Tool Chest


Tool Kits


Cantilever Kits

PART No: 10136

115 Piece Metric & AF Tool Kit1/4" Drive Sockets & Accessories7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1⁄4, 9/32, 5/16, 11/32, 3/8”1 Socket AccessorySocket Driver, 150mm


1/2" Drive Sockets & Accessories9 Metric SocketsStandard: 10, 12, 13, 14, 15, 16, 17, 18, 19mm11 AF SocketsStandard: 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4, 13/16, 7/8, 15/16, 1”Spark Plug: 5/8”4 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 300mm

Ring & Open End Spanners10 Metric Spanners8, 10, 11, 12, 13, 14, 16, 17, 18, 19mm10 AF Spanners1⁄4, 5/16, 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4, 15/16”






Heavy Duty 5-Tray Cantilever Tool Box

535L x 255W x 220Hmm

Cantilever Kits

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Tool

Che

st K

its

PART No: 10135



Ring & Open End Spanners8 Metric Spanners8, 10, 11, 12, 13, 14, 15, 17mm8 AF Spanners1⁄4, 5/16, 3/8, 7/16, 1⁄2, 9/16, 5/8, 3 ⁄4”



Punches4 Centre Punches3, 4, 5, 6.5mm4 Long Pin Punches3, 4, 5, 6mm2 Starter Drift Punches3, 5mm

Adjustable Wrench 250mmPliersMultigrips 250mmCombination Pliers 180mmDiagonal Cutting Pliers 170mmLong Nose Pliers 170mmLocking 240mm


3 Drawer Tool Chest


Tool Chest Kits

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Tool

Che

st K

its

PART No: 10135






Punches4 Centre Punches3, 4, 5, 6.5mm4 Long Pin Punches3, 4, 5, 6mm2 Starter Drift Punches3, 5mm



3 Drawer Tool Chest


Tool Chest Kits

Tool Kits


Tool Chest Kits

PART No: 10213

104 Piece Metric Tool Kit1/2" Drive Sockets & Accessories

37 SocketsStandard: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm6 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 375mmSpeed Brace, 420mmUniversal Joint, Ball Type

Ring Spanners

7 Spanners 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm


10 Spanners8, 10, 11, 12, 13, 14, 16, 17, 18, 19mm

Flare Nut Spanners


Screwdrivers

Phillips Tip: 75mm x #1, 40mm x #2, 100mm x #2Standard Tip: 75 x 3.2mm, 100 x 4.75mm, 100 x 6.35mm, 150 x 7.9mm


9 Hex Keys1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm



Adjustable Wrenches 150, 300mm

Pliers

Multigrips 250mmCombination Pliers 200mmDiagonal Cutting Pliers 200mmLong Nose Pliers 200mmLocking 240mm


Hacksaw 300mm

6 Drawer Tool Chest


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Kits


Cant

ileve

r Kits

PART No: 10137

86 Piece Metric & AF Tool Kit1/4" Drive Sockets & Accessories7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1⁄4, 9/32, 5/16, 11/32, 3/8”3 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mm

1/2" Drive Sockets & Accessories8 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17mm9 AF SocketsStandard: 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”Spark Plug: 5/8 & 13/16”3 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mm







535L x 255W x 220Hmm

Cantilever Kits

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Kits


Cant

ileve

r Kits

PART No: 10137

86 Piece Metric & AF Tool Kit1/4" Drive Sockets & Accessories7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1⁄4, 9/32, 5/16, 11/32, 3/8”3 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mm

1/2" Drive Sockets & Accessories8 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17mm9 AF SocketsStandard: 3/8, 7/16, 1⁄2, 9/16, 5/8, 11/16, 3 ⁄4”Spark Plug: 5/8 & 13/16”3 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mm







535L x 255W x 220Hmm

Cantilever Kits

Tool Kits


Tool Box Kits

PART No: 10142

66 Piece Metric & AF Tool Kit1/2" Drive Sockets & Accessories18 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 30, 32mm16 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4"Spark Plug: 13/16"6 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmSliding T Handle, 240mmUniversal Joint, Ball Type

Ring and Open End Spanners8 Metric Spanners8, 10, 11, 12, 13, 14, 15, 17mm8 AF Spanners1⁄4, 5/16, 3/8, 7/16, 1⁄2, 9/16, 5/8, 3 ⁄4”

ScrewdriversPhillips Tip: 75mm x #1, 100mm x #2Standard Tip: 100 x 4.75mm, 100 x 6.35mm

Adjustable Wrench 250mmPliersMultigrips 250mmCombination Pliers 180mmDiagonal Cutting Pliers 170mmLong Nose Pliers 170mm

Heavy Duty Cantilever Tool Box

445 x 210 x 180mm

PART No: 10141

69 Piece Metric & AF Tool Kit1/2" Drive Sockets & Accessories18 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 30, 32mm16 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1-1/8, 1-3/16, 1-1/4"Spark Plug: 13/16"6 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmSliding T Handle, 240mmUniversal Joint, Ball Type



Heavy Duty Cantilever Tool Box

445 x 210 x 180mm

Tool Box Kits

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Storage


Tool Chest Features and Benefits• ARS - Auto return ball bearing, spring-loaded slides. - Smooth drawer action even when fully loaded - Increased load capacity of drawers - Easier to remove drawers - 100% drawer extension allows full access to tools• Heavy gauge steel on critical sections of chest - Stronger and last longer• Powder coated with polyester/epoxy hybrid - Scratch resistance - Protection against coat fading due to UV rays• Side handles are chrome plated and PVC coated on flat section - Better and more comfortable grip• Each lid supported by chrome plated lid stays made from heavy gauge steel• Drawer sides have rolled edges - Greater strength and rigidity• Anodised aluminium drawer handles with provision for inserting labels• All drawers fitted with drawer liners• Top lid rubber stops - Cushions and protects chest as top lid is closed• Fits on top of existing Sidchrome Roller Cabinets

Roller Cabinets Features and Benefits• ARS - Auto return ball bearing, spring-loaded slides. - Smooth drawer action even when fully loaded - Increased load capacity of drawers - Easier to remove drawers - 100% drawer extension allows full access to tools• Heavy gauge steel on critical sections of chest - Stronger and last longer• Powder coated with polyester/epoxy hybrid - Scratch resistance - Protection against coat fading due to UV rays• Side handles are PVC coated on flat section - Better and more comfortable grip• Drawer sides have rolled edges - Greater strength and rigidity• Anodised aluminium drawer handles with provision for inserting labels• All drawers fitted with drawer liners

Safety• Do not open more than one loaded drawer at a time.

• Lock or secure all drawers before moving.

Featuring: ARS Auto Return, Ball Bearing, Spring-Loaded Slides.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Storage


Tool Chest Features and Benefits• ARS - Auto return ball bearing, spring-loaded slides. - Smooth drawer action even when fully loaded - Increased load capacity of drawers - Easier to remove drawers - 100% drawer extension allows full access to tools• Heavy gauge steel on critical sections of chest - Stronger and last longer• Powder coated with polyester/epoxy hybrid - Scratch resistance - Protection against coat fading due to UV rays• Side handles are chrome plated and PVC coated on flat section - Better and more comfortable grip• Each lid supported by chrome plated lid stays made from heavy gauge steel• Drawer sides have rolled edges - Greater strength and rigidity• Anodised aluminium drawer handles with provision for inserting labels• All drawers fitted with drawer liners• Top lid rubber stops - Cushions and protects chest as top lid is closed• Fits on top of existing Sidchrome Roller Cabinets

Roller Cabinets Features and Benefits• ARS - Auto return ball bearing, spring-loaded slides. - Smooth drawer action even when fully loaded - Increased load capacity of drawers - Easier to remove drawers - 100% drawer extension allows full access to tools• Heavy gauge steel on critical sections of chest - Stronger and last longer• Powder coated with polyester/epoxy hybrid - Scratch resistance - Protection against coat fading due to UV rays• Side handles are PVC coated on flat section - Better and more comfortable grip• Drawer sides have rolled edges - Greater strength and rigidity• Anodised aluminium drawer handles with provision for inserting labels• All drawers fitted with drawer liners

Safety• Do not open more than one loaded drawer at a time.

• Lock or secure all drawers before moving.

Featuring: ARS Auto Return, Ball Bearing, Spring-Loaded Slides.

Tool Storage


Wide Body

PART No: 50224

13 Drawer Widebody Roller CabinetWide Deep High

Cabinet

1065mm 480mm 1015mm**includes castors

Drawers

1 940mm 400mm 95mm5 570mm 400mm 70mm1 570mm 400mm 150mm5 305mm 400mm 70mm1 305mm 400mm 150mm

PART No: 50218

8 Drawer Widebody Tool ChestWide Deep High

Cabinet

1065mm 470mm 445mm

Drawers

4 335mm 400mm 60mm4 595mm 400mm 60mm

Wide Body

Widebody Tool Chest Features and Benefits• ARS - Auto return ball bearing, spring-loaded slides. • 4 Heavy duty chrome plated chest handles• Gas Lift Struts On Both Sides Of Lid• All drawers with drawer liners.• Cropped corners for safety.• Drawer sides have rolled edges for extra strength.• Innovative drawer handles with provision for labels to list contents. • Finished in tough powder coated bright red gloss

Widebody Roller Cabinet Features and Benefits• ARS - Auto return ball bearing, spring-loaded slides.• 2 Heavy duty tubular side handles• Lacquered wooden top.• All drawers with drawer liners.• Welded frame base for extra strength• Cropped corners for safety.• Large 125mm x 50mm castors, 2 fixed, 2 swivel with brake.• Centre locking.• Drawer sides have rolled edges for extra strength.• Innovative drawer handles with provision for labels to list contents. • Finished in tough powder coated bright red gloss.• Fully assembled on wooden pallet.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Storage


Tool

Che

sts

PART No: 50209

9 Drawer Tool ChestWide Deep High

Chest

665mm 305mm 435mm

Drawers

6 170mm 270mm 50mm2 570mm 270mm 50mm1 570mm 270mm 75mm

PART No: 50208


Chest

665mm 305mm 435mm

Drawers

1* 170mm 270mm 100mm4 170mm 270mm 50mm2 570mm 270mm 50mm1 570mm 270mm 75mm

*Independently Lockable

PART No: 50200

10 Drawer Extra Deep Tool ChestWide Deep High

Chest

665mm 405mm 490mm

Drawers

6 165mm 365mm 50mm2 570mm 365mm 50mm1 570mm 365mm 75mm1 170mm 365mm 150mm

Tool Chests

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Storage


Tool

Che

sts

PART No: 50209


Chest

665mm 305mm 435mm

Drawers


PART No: 50208


Chest

665mm 305mm 435mm

Drawers

1* 170mm 270mm 100mm4 170mm 270mm 50mm2 570mm 270mm 50mm1 570mm 270mm 75mm

*Independently Lockable

PART No: 50200

10 Drawer Extra Deep Tool ChestWide Deep High

Chest

665mm 405mm 490mm

Drawers

6 165mm 365mm 50mm2 570mm 365mm 50mm1 570mm 365mm 75mm1 170mm 365mm 150mm

Tool Chests

Tool Storage


Tool Chests

PART No: 50233

3 Drawer Intermediate Tool ChestFits under 3, 6, 8 and 9 drawer Tool Chests

Wide Deep High

Chest

670mm 310mm 265mmDrawers2 570mm 270mm 50mm1 570mm 270mm 75mm

PART No: 50203


Chest

600mm 260mm 325mmDrawers3 510mm 225mm 65mm

PART No: 50216


Chest

665mm 305mm 325mmDrawers3 170mm 270mm 50mm2 570mm 270mm 50mm1 570mm 270mm 75mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Storage


Rolle

r Cab

inet

s PART No: 50207

7 Drawer Roller CabinetWide Deep High

Cabinet


Drawers

5 570mm 400mm 75mm2 570mm 400mm 150mm

PART No: 50215


Cabinet


Drawers

3 570mm 400mm 75mm2 570mm 400mm 150mm

PART No: 50204


Cabinet


Drawers


Roller Cabinets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Storage


Rolle

r Cab

inet

s PART No: 50207


Cabinet


Drawers

5 570mm 400mm 75mm2 570mm 400mm 150mm

PART No: 50215


Cabinet


Drawers

3 570mm 400mm 75mm2 570mm 400mm 150mm

PART No: 50204


Cabinet


Drawers


Roller Cabinets

Tool Storage


Accessories

PART No: 50330

Side ShelfShelf secures firmly to the side of Sidchrome Roller Cabinets, using thepre-drilled side handle holesIdeal for holding tools in current use, small parts and fastenersPowder coated with polyester/epoxy hybrid- Scratch resistance- Protection against coat fading due to UV rays

Wide Deep High

Side Shelf

450mm 435mm 170mm

PART No: 50331

Side CabinetAttaches to all Sidchrome roller cabinets – 50207, 50204, 50224Heavy gauge steel on critical sections of cabinet– Stronger and last longer Powder coated with polyester/epoxy hybrid– Scratch resistance– Protection against coat fading due to UV raysAdjustable shelvesEasy attachment - no bolts required

Wide Deep High

Side Cabinet

375mm 458mm 857mm

Accessories

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Tool Storage


Tool

Che

sts PART No: 51108

Heavy Duty 5-Tray Cantilever Tool BoxWide Deep High

Tool Box

535mm 255mm 220mm

Compartments

4 530mm 120mm 50mm1 530mm 250mm 90mm

PART No: 51252

2 Drawer Wall CabinetWide Deep High

Tool Box

745mm 210mm 880mm

Drawers

2 625mm 165mm 50mm

PART No: 51251


Tool Box

745mm 210mm 880mm

Drawers

1 625mm 165mm 50mm

PART No: 51130

Heavy Duty Cantilever Tool BoxWide Deep High

Tool Box

445mm 210mm 180mm

Compartments

1 440mm 200mm 40mm1 440mm 205mm 135mm

Tool Chests

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Tool Storage


Tool

Che

sts PART No: 51108

Heavy Duty 5-Tray Cantilever Tool BoxWide Deep High

Tool Box

535mm 255mm 220mm

Compartments

4 530mm 120mm 50mm1 530mm 250mm 90mm

PART No: 51252


Tool Box

745mm 210mm 880mm

Drawers

2 625mm 165mm 50mm

PART No: 51251


Tool Box

745mm 210mm 880mm

Drawers

1 625mm 165mm 50mm

PART No: 51130

Heavy Duty Cantilever Tool BoxWide Deep High

Tool Box

445mm 210mm 180mm

Compartments

1 440mm 200mm 40mm1 440mm 205mm 135mm

Tool Chests

Tool Storage


Spare Parts

Item # Description Suits

50300 Lock & Key Assy 50217 / 50200 / 50203 / 50205 / 50209 / 50216 / 50218

50301 Lock & Key Assy 50207 / 50215 / 50233 / 50224

50325 Lock & Key Assy 50208

50302 Caster Swivel W/Brake 50207/50215

50303 Caster Fixed 50207/50215

50327 Caster Swivel W/Brake 50224

50328 Caster Fixed 50224

50304 Handle Roll Cab 50207/50215

50305 Mat Roll Cab 50207/50215

50306 Mat Add-On Chest 50233

50307 Drawer Liner Set 50215












50316 Ball Bearing Slide 50203


50318 Ball Bearing Slide 50208/50209/50216/50217/50233

50319 Ball Bearing Slide 50207/50215




50316-A ARS Ball Bearing Slide 50203

50318-A ARS Ball Bearing Slide 50208/50209/50216/50217/50233

50319-A ARS Ball Bearing Slide 50207/50215/50204

50322-A ARS Ball Bearing Slide 50200

50332-A ARS Ball Bearing Slide 50218 / 50224

* NB: Drawer Slides are in pairs

Spare Parts

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00






Socket Sets - Portable QualitySidchrome® Socket Sets give you the choice of spanner or socket you need to get the job done. Our sets have been designed with flexibility, quality and portability in mind. You can easily carry a set anywhere around the workshop of take it in a vehicle to a worksite and be assured that all your tools are secured and protected in compact, sturdy boxes.

Sockets Sets are available in combination, metric-only or AF-only sizes. Sets feature our most popular tools including a broad selection of ring andopen-ended spanners, 1/4” and 1/2” square drive sockets, spark plug sockets and socket accessories.

When you add a Sidchrome® Socket Set to your workshop or site Tool Chest you are gaining flexibility and premium quality tools, all designed to give you “The Professional Advantage”.

Single-Hex or Double-Hex?By using a single-hex (6 point) or double-hex (12 point) sockets, all sides of a hexagon nut or bolt are contacted with equal force when torque is applied. The 12 point is more popular because of easy positioning onto the head, and it gives twelve different angular positions.

Features at a glance• Build up sets with unnecessary duplication of sockets or accessories.

Sidchrome® sets have been designed so you can easily build larger sets from smaller sets.

• Sockets includes standard length (single-hex and double-hex), extra deep, spark plug and impact types.

• Drive sizes range from 1/4” to 3/4” square drives.• Exclusive TRU-TORQUE™ sets.• Broad selection of Socket Accessories – see Chapter 4: Sockets and

Socket Accessories.• Socket Sets available in a comprehensive range of combination, metric or

AF drive sizes.


• Do not use extenders or cheater bars.• Pull hand tools toward you. Do not push.• Do not strike the ratchet head or handle.


• Disconnect electricity when working on electrical parts.

StandardsSidchrome sockets, spanners & wrenches are manufactured to meet or exceed relevant ASME and DIN international quality standards. So you can be sure your Sidchrome tools are tough enough to stand up to the harshest working environments.

Featuring: Torque Plus™ Fastening System This unique system allows greater contact with the flats of fasteners, providing greater torque to enable easier fastening..

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0






Socket Sets - Portable QualitySidchrome® Socket Sets give you the choice of spanner or socket you need to get the job done. Our sets have been designed with flexibility, quality and portability in mind. You can easily carry a set anywhere around the workshop of take it in a vehicle to a worksite and be assured that all your tools are secured and protected in compact, sturdy boxes.

Sockets Sets are available in combination, metric-only or AF-only sizes. Sets feature our most popular tools including a broad selection of ring andopen-ended spanners, 1/4” and 1/2” square drive sockets, spark plug sockets and socket accessories.

When you add a Sidchrome® Socket Set to your workshop or site Tool Chest you are gaining flexibility and premium quality tools, all designed to give you “The Professional Advantage”.

Single-Hex or Double-Hex?By using a single-hex (6 point) or double-hex (12 point) sockets, all sides of a hexagon nut or bolt are contacted with equal force when torque is applied. The 12 point is more popular because of easy positioning onto the head, and it gives twelve different angular positions.

Features at a glance• Build up sets with unnecessary duplication of sockets or accessories.

Sidchrome® sets have been designed so you can easily build larger sets from smaller sets.

• Sockets includes standard length (single-hex and double-hex), extra deep, spark plug and impact types.

• Drive sizes range from 1/4” to 3/4” square drives.• Exclusive TRU-TORQUE™ sets.• Broad selection of Socket Accessories – see Chapter 4: Sockets and

Socket Accessories.• Socket Sets available in a comprehensive range of combination, metric or

AF drive sizes.


• Do not use extenders or cheater bars.• Pull hand tools toward you. Do not push.• Do not strike the ratchet head or handle.


• Disconnect electricity when working on electrical parts.


Featuring: Torque Plus™ Fastening System This unique system allows greater contact with the flats of fasteners, providing greater torque to enable easier fastening..

Page 47Always Wear Eye Protection Page 47

Socket & Spanner Sets


PART No: 10184

35 Piece Metric & AF Socket & Spanner Set1/2" Drive Sockets & Accessories10 Metric SocketsStandard: 8, 10, 12, 13, 14, 15, 16, 17, 18, 19mm9 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 15/16”4 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmSliding T Handle, 240mmUniversal Joint, Ball Type

Ring and Open End Spanners6 Metric Spanners8, 10, 12, 13, 14, 17mm6 AF Spanners3/8, 7/16, 1/2, 9/16, 5/8, 3/4”

51141 Replacement Box Only

490 x 205 x 50mm

PART No: 10175

60 Piece Metric & AF Socket & Spanner Set1/4" Drive Sockets & Accessories7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8”3 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmUniversal Joint

1/2" Drive Sockets & Accessories12 Metric SocketsStandard: 8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18, 19mm9 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4”Spark Plug: 5/8 & 13/16”4 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmSliding T Handle, 240mm

Ring and Open End Spanners10 Metric Ring & Open End Spanners8, 10, 11, 12, 13, 14, 15, 16, 17, 19mm8 AF Ring & Open End Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16”


490 x 205 x 50mm

PART No: 10236

31 Piece Metric Socket & Spanner Set1/2" Drive Sockets & Accessories14 SocketsStandard: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mmSpark Plug: 5/8 & 13/16”5 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 375mmUniversal Joint, Ball Type

Ring and Open End Spanners12 Metric Spanners8, 9, 10, 11, 12, 13, 14, 15, 16 17, 18, 19mm


490 x 205 x 50mm

Socket & Spanner Sets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



Mix

ed D

rive

& T

orx®

Set

s


PART No: 19105

38 Piece 1/4” & 3/8” Drive Socket Set- Metric & AF1/4" Drive Sockets & Accessories7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8”1 Socket AccessorySocket Driver, 150mm

3/8" Drive Sockets & Accessories8 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 17, 19mm9 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”Spark Plug: 5/8 & 13/16”6 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 75mmExtension, Male & Female, 150mmAdjustable Offset Handle, 220mmUniversal JointAdaptor, 3/8” Female to 1/4” Male


330 x 140 x 52mm

PART No: 19230

57 Piece 1/4 & 3/8” Drive Socket Set- Metric1/4" Drive Sockets & Accessories20 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mmDeep: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm4 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmUniversal Joint

3/8" Drive Sockets & Accessories27 Metric SocketsStandard: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18mm6 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 75mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmUniversal JointAdaptor, 3/8” Female to 1/4” Male


490 x 205 x 50mm

Mixed Drive & Torx® Sets

TORX® is a registered trademark of Camcar Division of Textron* These parts have no connection with the proprietors of the registered trademarks.

PART No: 19107

10 Piece 1/4 & 3/8” Drive Socket Set- Tru-Torque (TORX)10 Tru-Torque (TORX) Sockets1/4” Drive: S-10, S-15, S-20, S-253/8” Drive: S-27, S-30, S-40, S-45, S-50, S-55


240 x 70 x 43mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



Mix

ed D

rive

& T

orx®

Set

s


PART No: 19105

38 Piece 1/4” & 3/8” Drive Socket Set- Metric & AF1/4" Drive Sockets & Accessories7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8”1 Socket AccessorySocket Driver, 150mm

3/8" Drive Sockets & Accessories8 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 17, 19mm9 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”Spark Plug: 5/8 & 13/16”6 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 75mmExtension, Male & Female, 150mmAdjustable Offset Handle, 220mmUniversal JointAdaptor, 3/8” Female to 1/4” Male


330 x 140 x 52mm

PART No: 19230

57 Piece 1/4 & 3/8” Drive Socket Set- Metric1/4" Drive Sockets & Accessories20 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mmDeep: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm4 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmUniversal Joint

3/8" Drive Sockets & Accessories27 Metric SocketsStandard: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18mm6 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 75mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmUniversal JointAdaptor, 3/8” Female to 1/4” Male


490 x 205 x 50mm

Mixed Drive & Torx® Sets

TORX® is a registered trademark of Camcar Division of Textron* These parts have no connection with the proprietors of the registered trademarks.

PART No: 19107

10 Piece 1/4 & 3/8” Drive Socket Set- Tru-Torque (TORX)10 Tru-Torque (TORX) Sockets1/4” Drive: S-10, S-15, S-20, S-253/8” Drive: S-27, S-30, S-40, S-45, S-50, S-55


240 x 70 x 43mm


Mixed D

rive & Torx

® Sets


PART No: 19135

51 Piece 1/4 & 1/2” Drive Socket Set- Metric & AF1/4" Drive Sockets & Accessories7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8”4 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmUniversal Joint

1/2" Drive Sockets & Accessories15 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 27mm13 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”Spark Plug: 5/8 & 13/16”5 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmSliding T Handle, 240mmUniversal Joint, Ball Type


490 x 205 x 50mm

PART No: 19130

37 Piece 1/4 & 1/2” Drive Socket Set- Metric & AF1/4" Drive Sockets & Accessories7 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10mm7 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8”3 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mm

1/2" Drive Sockets & Accessories8 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17mm9 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”Spark Plug: 5/8 & 13/16”3 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mm


330 x 140 x 52mm

PART No. 70288

9 Piece Torx® Socket Set• 1/4” Square Drive Sockets - E-6, E-7, E-8• 3/8” Square Drive Sockets - E-10, E-12, E-14, E-16, E-18, E-20

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1/4”

Dri

ve S

ets


PART No: 12110

23 Piece 1/4” Drive Socket Set - Metric & AF10 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm9 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2”4 Socket AccessoriesRatchet, Reversible Male, 145mm Extension, Male & Female, 50mmExtension, Male & Female, 150mmAdjustable Offset Handle, 145mm


240 x 70 x 43mm

PART No: 12130

43 Piece 1/4” Drive Socket Set - Metric & AF20 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mmDeep: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm18 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2”Deep: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2”5 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmAdjustable Offset Handle, 145mmUniversal Joint


330 x 140 x 52mm

PART No: 12230

10 Piece 1/4” Drive Deep Socket Set - Metric10 Metric SocketsDeep: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mmClips & Rail

PART No: 12430

9 Piece 1/4” Drive Deep Socket Set - AF9 AF SocketsDeep: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2”Clips & Rail

1/4” Drive Sets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1/4”

Dri

ve S

ets


PART No: 12110

23 Piece 1/4” Drive Socket Set - Metric & AF10 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm9 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2”4 Socket AccessoriesRatchet, Reversible Male, 145mm Extension, Male & Female, 50mmExtension, Male & Female, 150mmAdjustable Offset Handle, 145mm


240 x 70 x 43mm

PART No: 12130

43 Piece 1/4” Drive Socket Set - Metric & AF20 Metric SocketsStandard: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mmDeep: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm18 AF SocketsStandard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2”Deep: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2”5 Socket AccessoriesRatchet, Reversible Male, 145mmExtension, Male & Female, 50mmExtension, Male & Female, 150mmAdjustable Offset Handle, 145mmUniversal Joint


330 x 140 x 52mm

PART No: 12230


PART No: 12430

9 Piece 1/4” Drive Deep Socket Set - AF9 AF SocketsDeep: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2”Clips & Rail

1/4” Drive Sets


3/8” Drive Sets


PART No: 13107

43 Piece 3/8” Drive Socket Set - Metric/AF22 Metric SocketsStandard: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm14 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”Deep: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”7 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 75mmExtension, Male & Female, 150mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmUniversal JointAdaptor, 3/8” Female to 1/4” Male


425 x 175 x 52mm

PART No: 13110

56 Piece 3/8” Drive Socket Set - Metric & AF28 Metric SocketsStandard: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm20 AF SocketsStandard: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8”Deep: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”Spark Plug: 5/8 & 13/16”8 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 75mmExtension, Male & Female, 150mmExtension, Male & Female, 250mmAdjustable Offset Handle, 220mmUniversal JointAdaptor, 3/8” Female to 1/4” MaleAdaptor, 3/8” Female to 1/2” Male


490 x 205 x 50mm

PART No: 13106

33 Piece 3/8” Drive Socket Set - Dual Ratchet - Metric & AF15 Metric SocketsStandard: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 20, 21, 22mm13 AF SocketsStandard: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8”Spark Plug: 5/8 & 13/16”5 Socket AccessoriesRatchet, Reversible Male, 195mmRatchet, Reversible Male, Fine Tooth, 205mmExtension, Male & Female, 150mmAdjustable Offset Handle, 220mmUniversal Joint


330 x 140 x 52mm

3/8” Drive Sets

S

ET CONTAINS

2 STANDARD AND FINE TOOTH

RAtCHEtS

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



3/8”

Dri

ve S

ets


PART No: 13205

21 Piece 3/8” Drive Socket Set - Metric17 SocketsStandard: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mmSpark Plug: 5/8 & 13/16”4 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 150mmAdjustable Offset Handle, 220mmUniversal Joint


330 x 140 x 52mm

PART No: 13105

32 Piece 3/8” Drive Socket Set - Metric & AF15 Metric SocketsStandard: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 20, 21, 22mm13 AF SocketsStandard: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8”Spark Plug: 5/8 & 13/16”4 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 150mmAdjustable Offset Handle, 220mmUniversal Joint


330 x 140 x 52mm

PART No: 13430

7 Piece 3/8” Drive Deep Socket Set - AF7 AF SocketsDeep: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”Clips & Rail

PART No: 13235


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



3/8”

Dri

ve S

ets


PART No: 13205

21 Piece 3/8” Drive Socket Set - Metric17 SocketsStandard: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mmSpark Plug: 5/8 & 13/16”4 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 150mmAdjustable Offset Handle, 220mmUniversal Joint


330 x 140 x 52mm

PART No: 13105

32 Piece 3/8” Drive Socket Set - Metric & AF15 Metric SocketsStandard: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 20, 21, 22mm13 AF SocketsStandard: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8”Spark Plug: 5/8 & 13/16”4 Socket AccessoriesRatchet, Reversible Male, 195mmExtension, Male & Female, 150mmAdjustable Offset Handle, 220mmUniversal Joint


330 x 140 x 52mm

PART No: 13430


PART No: 13235



3/8” Drive In-Hex Sets


PART No: 13280

9 Piece 3/8” Drive In-Hex Socket Set - Metric9 Metric In-Hex SocketsSizes: 3, 4, 5, 6, 7, 8, 9 ,10, 12mm

PART No: 13456

7 Piece 3/8” Drive In-Hex Socket Set - AF7 A/F In-Hex SocketsSizes: 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8”


PART No: J4900A

10 Piece 3⁄8” & 1/2” Drive In-Hex Bit Set - AF10 A/F In-Hex Sockets 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 1/2, 9/16, 5/8”

PART No: J4900MA

10 Piece 3⁄8” & 1/2” Drive In-Hex Bit Set - Metric10 Metric In-Hex Sockets4, 5, 6, 7, 8, 9 ,10, 12, 14, 17mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1/2”

Dri

ve S

ets


PART No: 14130

51 Piece 1/2” Drive Socket Set - Metric & AF25 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm20 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”Deep: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”Spark Plug: 5/8 & 13/16”6 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 375mmUniversal Joint, Ball Type


490 x 205 x 50mm

PART No: 14104

41 Piece 1/2” Drive Socket Set - Metric & AF19 Metric SocketsStandard: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4”Spark Plug: 5/8 & 13/16”5 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 375mmUniversal Joint, Ball Type


490 x 205 x 50mm

PART No: 14106

40 Piece 1/2” Drive Socket Set - Dual Ratchet - Metric & AF18 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 30, 32mm16 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4”Spark Plug: 13/16”6 Socket AccessoriesRatchet, Reversible Male, 250mmRatchet, Reversible Male, Fine Tooth 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmUniversal Joint, Ball Type


425 x 175 x 52mm

1/2” Drive Sets

S

ET CONTAINS


RAtCHEtS

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1/2”

Dri

ve S

ets


PART No: 14130

51 Piece 1/2” Drive Socket Set - Metric & AF25 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24mmDeep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm20 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”Deep: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”Spark Plug: 5/8 & 13/16”6 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 375mmUniversal Joint, Ball Type


490 x 205 x 50mm

PART No: 14104

41 Piece 1/2” Drive Socket Set - Metric & AF19 Metric SocketsStandard: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4”Spark Plug: 5/8 & 13/16”5 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 375mmUniversal Joint, Ball Type


490 x 205 x 50mm

PART No: 14106

40 Piece 1/2” Drive Socket Set - Dual Ratchet - Metric & AF18 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 30, 32mm16 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4”Spark Plug: 13/16”6 Socket AccessoriesRatchet, Reversible Male, 250mmRatchet, Reversible Male, Fine Tooth 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmUniversal Joint, Ball Type


425 x 175 x 52mm

1/2” Drive Sets

S

ET CONTAINS


RAtCHEtS


1/2” Drive Sets


PART No: 14110

24 Piece 1/2” Drive Socket Set - Metric & AF9 Metric SocketsStandard: 10, 12, 13, 14, 15, 16, 17, 18, 19mm11 AF SocketsStandard: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”Spark Plug: 5/8”4 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 300mm


330 x 140 x 52mm

PART No: 14105

40 Piece 1/2” Drive Socket Set - Metric & AF18 Metric SocketsStandard: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 30, 32mm16 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4”Spark Plug: 13/16”6 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 65mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmSliding T Handle, 240mmUniversal Joint, Ball Type


425 x 175 x 52mm

PART No: 14210

33 Piece 1/2” Drive Socket Set - Metric27 SocketsStandard: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32mmSpark Plug: 5/8 & 13/16”6 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmAdjustable Offset Handle, 375mmSpeed Brace, 420mmUniversal Joint, Ball Type


490 x 205 x 50mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1/2”

Dri

ve S

ets


PART No: 14208

20 Piece 1/2” Drive Socket Set - Metric17 SocketsStandard: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mmSpark Plug: 5/8 & 13/16”3 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmAdjustable Offset Handle, 220mm


330 x 140 x 52mm

PART No: 14214

20 Piece 1/2” Drive Socket Set - Metric20 Metric SocketsStandard: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 30, 32mm


330 x 140 x 52mm

PART No: 14412

21 Piece 1/2” Drive Socket Set - AF17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4”Spark Plug: 5/8 & 13/16”4 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmUniversal Joint, Ball Type


330 x 140 x 52mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1/2”

Dri

ve S

ets


PART No: 14208

20 Piece 1/2” Drive Socket Set - Metric17 SocketsStandard: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mmSpark Plug: 5/8 & 13/16”3 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmAdjustable Offset Handle, 220mm


330 x 140 x 52mm

PART No: 14214

20 Piece 1/2” Drive Socket Set - Metric20 Metric SocketsStandard: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 30, 32mm


330 x 140 x 52mm

PART No: 14412

21 Piece 1/2” Drive Socket Set - AF17 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4”Spark Plug: 5/8 & 13/16”4 Socket AccessoriesRatchet, Reversible Male, 250mmExtension, Male & Female, 125mmExtension, Male & Female, 250mmUniversal Joint, Ball Type


330 x 140 x 52mm


1/2” Drive Sets


PART No: 14414

15 Piece 1/2” Drive Socket Set - AF15 AF SocketsStandard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4”


330 x 140 x 52mm

PART No: 14451


PART No: 14252


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1/2”

Dri

ve In

-Hex

Set

s


PART No: 14275

13 Piece 1/2” Drive In-Hex & Spline Socket Set - Metric9 Metric Inhex SocketsShort: 6, 7, 8, 10, 12, 14, 17mm Long: 8 & 10mm4 Spline SocketsShort: M6 Long: M8, M10, M12


330 x 140 x 52mm

PART No: 14274

7 Piece 1/2” Drive In-Hex Socket Set - Metric7 Metric Inhex SocketsShort: 6, 7, 8, 10, 12, 14, 17mm


240 x 70 x 43mm

PART No: 14465

9 Piece 1/2” Drive In-Hex Socket Set - AF9 AF Inhex SocketsShort: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16, 5/8”


240 x 70 x 43mm


PART No. XS4H09T

Socket Set Imperial• 9 Piece• Sizes: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16, 5/8”

PART No. XS4H09MT

Socket Set Metric• 9 Piece• Sizes: 5, 6, 7, 8, 9, 10, 12, 14, 17mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1/2”

Dri

ve In

-Hex

Set

s


PART No: 14275

13 Piece 1/2” Drive In-Hex & Spline Socket Set - Metric9 Metric Inhex SocketsShort: 6, 7, 8, 10, 12, 14, 17mm Long: 8 & 10mm4 Spline SocketsShort: M6 Long: M8, M10, M12


330 x 140 x 52mm

PART No: 14274

7 Piece 1/2” Drive In-Hex Socket Set - Metric7 Metric Inhex SocketsShort: 6, 7, 8, 10, 12, 14, 17mm


240 x 70 x 43mm

PART No: 14465

9 Piece 1/2” Drive In-Hex Socket Set - AF9 AF Inhex SocketsShort: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16, 5/8”


240 x 70 x 43mm


PART No. XS4H09T

Socket Set Imperial• 9 Piece• Sizes: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16, 5/8”

PART No. XS4H09MT

Socket Set Metric• 9 Piece• Sizes: 5, 6, 7, 8, 9, 10, 12, 14, 17mm


1/2” Drive Im

pact Sets


PART No. XS410T

Socket Set Imperial• 10 Piece• Sizes: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”

PART No. XS410MT

Socket Set Metric• 10 Piece• Sizes: 10, 11, 12, 13, 14, 17, 19, 21, 22, 24mm

PART No. XS410LT

Socket Set Imperial Long• 10 Piece• Sizes: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”

PART No. 14370

6 Piece Torsion Bar Kit• No more busted wheel studs or nuts• 3 “colour coded torque control” torsion bars &

3 colour coded Protecta deep wheel nut sockets• Designed to suit most Australian & Imported

passenger and light commercial vehicles

PROTECTA SOCKETSBlue = 17mmYellow = 19mmRed = 21mm

TORSION BARSYellow = 90NM (65 ft/lb)Blue = 110NM (80ft/lb)Grey = 135NM (100ft/lb)

Note: From 2009 kit will become an 8 piece kit & include 22mm socket &120NM torsion bar.

PART No. XS410MLT

Socket Set Metric Long• 10 Piece• Sizes: 10, 11, 12, 13, 14, 17, 19, 21, 22, 24mm

PART No. XS418M

1/2”Dr Impact Socket Set• 18 Piece• Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm

1/2” Drive Impact Sets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



3/4”

Dri

ve S

ets


PART No: 15106

32 Piece 3/4” Drive Socket Set - Metric & AF12 Metric SocketsStandard: 19, 22, 24, 27, 30, 32, 36, 38, 41, 46, 50, 55mm15 AF SocketsStandard: 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-7/8”5 Socket AccessoriesRatchet, Reversible Male, 500mmExtension, Male & Female, 200mmExtension, Male & Female, 400mmAdjustable Offset Handle, 500mmUniversal Joint


510 x 295 x 85mm

PART No: 15405

19 Piece 3/4” Drive Socket Set - AF14 AF SocketsStandard: 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-7/16, 1-1/2,1-11/16, 1-3/4, 1-13/16, 1-7/8, 2”5 Socket AccessoriesRatchet, Reversible Male, 500mmExtension, Male & Female, 200mmExtension, Male & Female, 400mmAdjustable Offset Handle, 500mmUniversal Joint


490 x 205 x 85mm

PART No: 15205

17 Piece 3/4” Drive Socket Set - Metric12 Metric SocketsStandard: 19, 22, 24, 27, 30, 32, 36, 38, 41, 46, 50, 55mm5 Socket AccessoriesRatchet, Reversible Male, 500mmExtension, Male & Female, 200mmExtension, Male & Female, 400mmAdjustable Offset Handle, 500mmUniversal Joint


490 x 205 x 85mm

3/4” Drive Sets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



3/4”

Dri

ve S

ets


PART No: 15106

32 Piece 3/4” Drive Socket Set - Metric & AF12 Metric SocketsStandard: 19, 22, 24, 27, 30, 32, 36, 38, 41, 46, 50, 55mm15 AF SocketsStandard: 3/4, 13/16, 7/8, 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-7/8”5 Socket AccessoriesRatchet, Reversible Male, 500mmExtension, Male & Female, 200mmExtension, Male & Female, 400mmAdjustable Offset Handle, 500mmUniversal Joint


510 x 295 x 85mm

PART No: 15405

19 Piece 3/4” Drive Socket Set - AF14 AF SocketsStandard: 15/16, 1”, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-7/16, 1-1/2,1-11/16, 1-3/4, 1-13/16, 1-7/8, 2”5 Socket AccessoriesRatchet, Reversible Male, 500mmExtension, Male & Female, 200mmExtension, Male & Female, 400mmAdjustable Offset Handle, 500mmUniversal Joint


490 x 205 x 85mm

PART No: 15205

17 Piece 3/4” Drive Socket Set - Metric12 Metric SocketsStandard: 19, 22, 24, 27, 30, 32, 36, 38, 41, 46, 50, 55mm5 Socket AccessoriesRatchet, Reversible Male, 500mmExtension, Male & Female, 200mmExtension, Male & Female, 400mmAdjustable Offset Handle, 500mmUniversal Joint


490 x 205 x 85mm

3/4” Drive Sets


3/4” Drive Im

pact Sets


PART No. XS608M

Socket Set Metric• 8 Piece• Sizes: 21, 22, 24, 27, 30, 32, 36, 41mm

PART No. XS608

Socket Set Imperial• 8 Piece• Sizes: 1, 1-1/16, 1-1/8, 1-1/4 1-5/16, 1-3/8, 1-7/16, 1-1/2”

PART No. XS608L

Socket Set Imperial Long• 8 Piece• Sizes: 1, 1-1/16, 1-1/8, 1-1/4 1-5/16, 1-3/8, 1-7/16, 1-1/2”

PART No. XS608ML

Socket Set Metric Long• 8 Piece• Sizes: 21, 22, 24, 27, 30, 32, 36, 41mm

3/4” Drive Impact Sets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1/4”

Driv

e So

cket

Acc

esso

ries


1/4” Drive Socket Accessories

ExtensionsPART No. Description Size

12906 • Male & Female • 50mm


PART No. 12914

Rotator Ratchet• Twist action handle for tight spaces• Rotates with 0º swing• 60 Tooth gear for a small 6º arc swing• Dual Function• Male• 185mm

PART No. 12919

Microtough Ratchet• Smallest ratchet head in the industry providing access to confined areas• 72 Tooth gear for a small 5º arc swing• Reversible• Male• 140mm

PART No. 12905

Ratchet• 45 Tooth mechanism for a 8º arc swing• Reversible• Male• 145mm

PART No. J4749

Heavy Duty Ratchet• 24 Tooth mechanism for a 15º arc swing• Reversible• Male• 127mm

Note: Ratchet Mechanism must be cleaned and lubricated twice a year - failure to do so may void warranty

Continuous drive using twist action handle

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1/4”

Driv

e So

cket

Acc

esso

ries






PART No. 12914

Rotator Ratchet• Twist action handle for tight spaces• Rotates with 0º swing• 60 Tooth gear for a small 6º arc swing• Dual Function• Male• 185mm

PART No. 12919


PART No. 12905

Ratchet• 45 Tooth mechanism for a 8º arc swing• Reversible• Male• 145mm

PART No. J4749







PART No. 70272

1/4” Socket Holding Rail• Neatly stores sockets in toolbox or on workbench• Clearly shows missing sockets

PART No. 12909

Universal Joint• Link joint

PART No. 12910

Socket Driver• 150mm

PART No. 12908

Adjustable Offset Handle• 145mm

PART No. 44112

Repair Kit• Suits 12919 Microtough Ratchet

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1/4”

Dri

ve S

ocke

ts


6 Point Metric Sockets - StandardPart No. Size

12215 4mm

12216 5mm

12217 6mm

12218 7mm

12219 8mm

12220 9mm

12221 10mm

12222 11mm

12223 12mm

12224 13mm

6 Point AF Sockets - StandardPart No. Size

12415 3/16”

12416 7/32”

12417 1/4”

12418 9/32”

12419 5/16”

12420 11/32”

12421 3/8”

12422 7/16”

12423 1/2”

6 Point Metric Sockets - DeepPart No. Size

12235 4mm

12236 5mm

12237 6mm

12238 7mm

12239 8mm

12240 9mm

12241 10mm

12242 11mm

12243 12mm

12244 13mm

6 Point AF Sockets - DeepPart No. Size

12435 3/16”

12436 7/32”

12437 1/4”

12438 9/32”

12439 5/16”

12440 11/32”

12441 3/8”

12442 7/16”

12443 1/2”

Sockets Tru-Torque (Torx®)Part No. Size

12375 T-10

12376 T-15

12377 T-20

12378 T-25

1/4” Drive Sockets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1/4”

Dri

ve S

ocke

ts



12215 4mm

12216 5mm

12217 6mm

12218 7mm

12219 8mm

12220 9mm

12221 10mm

12222 11mm

12223 12mm

12224 13mm


12415 3/16”

12416 7/32”

12417 1/4”

12418 9/32”

12419 5/16”

12420 11/32”

12421 3/8”

12422 7/16”

12423 1/2”


12235 4mm

12236 5mm

12237 6mm

12238 7mm

12239 8mm

12240 9mm

12241 10mm

12242 11mm

12243 12mm

12244 13mm


12435 3/16”

12436 7/32”

12437 1/4”

12438 9/32”

12439 5/16”

12440 11/32”

12441 3/8”

12442 7/16”

12443 1/2”


12375 T-10

12376 T-15

12377 T-20

12378 T-25






PART No. 13919

Mircotough Ratchet• Smallest ratchet head in the industry providing access to confined areas• 72 Tooth gear for a small 5º arc swing• Reversible• Male• 205mm

PART No. 13914

Rotator Dual Function• Twist action handle for tight spaces• Rotates with 0º swing• 60 Tooth gear for a small 6º arc swing• Dual Function• Male• 225mm

PART No. 13904

Swivelling Head Ratchet• Head can be pre-set to desired angle for access to hard to reach places• When head is set “straight” the ratchet can be used like a screwdriver• 72 Tooth gear for a small 5º arc swing• Male• 265mm

PART No. 13906

Reversible Ratchet• 30 Tooth mechanism for a 12º arc swing• Quick-Release• Male• 195mm

PART No. J5249




Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



3/8”

Dri

ve S

ocke

t Acc

esso

ries


*Angle or Wobble extensions have a modified male end enabling you to turn a fastener with the extension at an angle of up to 17º.

PART No. J5257A

Flex Head Ratchet• 72 Tooth gear for a small 5º arc swing• Small head design for access to tight areas• Reversible with 180º flex head• Male• 216mm

PART No. 13925


PART No. 13928

Sliding T Handle• 200mm

PART No. 13930

Speed Brace• 400mm

Extensions - Wobble*PART No. Description Size

13920 • Male & Female• Allows sockets to be driven at up to 15º angle

• 75mm


• 150mm


• 250mm






Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



3/8”

Dri

ve S

ocke

t Acc

esso

ries



PART No. J5257A

Flex Head Ratchet• 72 Tooth gear for a small 5º arc swing• Small head design for access to tight areas• Reversible with 180º flex head• Male• 216mm

PART No. 13925


PART No. 13928


PART No. 13930




• 75mm


• 150mm


• 250mm









Repair kitsPart No. Description

44105 Repair Kit Suits 13906 Ratchet

44113 Repair Kit Suits 13919 Microtough Ratchet

44165 Repair Kit Suits 13925 Adjustable Offset Handle

PART No. 70274


PART No. 13932

Universal Joint• Swivel ball joint

PART No. 19155

Adaptor• 3/8” Female to 1/4” Male

PART No. 19157


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



3/8”

Dri

ve S

ocke

ts



13215 5mm

13216 6mm

13217 7mm


13415 1/4”


13240 10mm

13241 11mm

13242 12mm

13243 13mm

13244 14mm

13245 15mm

13246 16mm

13247 17mm

13248 18mm

13249 19mm


13440 3/8”

13441 7/16”

13442 1/2”

13443 9/16”

13444 5/8”

13445 11/16”

13446 3/4”


13218 8mm

13219 9mm

13220 10mm

13221 11mm

13222 12mm

13223 13mm

13224 14mm

13225 15mm

13226 16mm

13227 17mm

13228 18mm

13229 19mm

13230 20mm

13231 21mm

13232 22mm


13416 5/16”

13417 3/8”

13418 7/16”

13419 1/2”

13420 9/16”

13421 5/8”

13422 11/16”

13423 3/4”

13424 13/16”

13425 7/8”


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



3/8”

Dri

ve S

ocke

ts



13215 5mm

13216 6mm

13217 7mm


13415 1/4”


13240 10mm

13241 11mm

13242 12mm

13243 13mm

13244 14mm

13245 15mm

13246 16mm

13247 17mm

13248 18mm

13249 19mm


13440 3/8”

13441 7/16”

13442 1/2”

13443 9/16”

13444 5/8”

13445 11/16”

13446 3/4”


13218 8mm

13219 9mm

13220 10mm

13221 11mm

13222 12mm

13223 13mm

13224 14mm

13225 15mm

13226 16mm

13227 17mm

13228 18mm

13229 19mm

13230 20mm

13231 21mm

13232 22mm


13416 5/16”

13417 3/8”

13418 7/16”

13419 1/2”

13420 9/16”

13421 5/8”

13422 11/16”

13423 3/4”

13424 13/16”

13425 7/8”






13375 S-27

13376 S-30

13377 S-40

13378 S-45

13379 S-50

13380 S-55

In-Hex Socket - MetricPart No. Size

13281 3mm

13282 4mm

13283 5mm

13284 6mm

13285 7mm

13286 8mm

13287 9mm

13288 10mm

13289 12mm

In-Hex Socket - AFPart No. Size

13457 1/8”

13458 5/32”

13459 3/6”

13460 7/32”

13461 1/4”

13462 5/16”

13463 3/8”

12 Point Spark PlugsPart No. Size

13435 5/8”

13436 13/16”

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1/2”

Dri

ve S

ocke

t Acc

esso

ries


PART No. 14904

BigFella Ratchet• 36 Tooth mechanism for a 10º arc swing• Quick-Release• Male• 425mm

PART No. 14919


PART No. 14906


PART No. J5450

Heavy Duty Long Ratchet• 24 Tooth mechanism for a 15º arc swing• Reversible• Male• 406mm

PART No. J5457A

Flex Head Ratchet• 24 Tooth mechanism for a 15º arc swing• Small head design for access to tight areas• Reversible with 180º flex head• Male• 432mm


PART No. 14907

Reversible Ratchet Accessories• 60 Tooth gear for a small 6º arc swing• 180º Swivel head• T Bar handle• Male • 340mm


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1/2”

Dri

ve S

ocke

t Acc

esso

ries


PART No. 14904

BigFella Ratchet• 36 Tooth mechanism for a 10º arc swing• Quick-Release• Male• 425mm

PART No. 14919


PART No. 14906


PART No. J5450

Heavy Duty Long Ratchet• 24 Tooth mechanism for a 15º arc swing• Reversible• Male• 406mm

PART No. J5457A

Flex Head Ratchet• 24 Tooth mechanism for a 15º arc swing• Small head design for access to tight areas• Reversible with 180º flex head• Male• 432mm


PART No. 14907

Reversible Ratchet Accessories• 60 Tooth gear for a small 6º arc swing• 180º Swivel head• T Bar handle• Male • 340mm





PART No. 14949

Impact Bar - The Breaker Bar With Impact• Creates impact to shock frozen nuts loose• 8x Torque multiplication with a single hammer blow• No compressed air required• 180º+ swivel head• 440mm







• 125mm


• 250mm


• 500mm


Adjustable Offset HandlePART No. Size

14930 • 220mm

14931 • 300mm

14932 • 375mm

14933 - Extended Square Drive • 450mm

PART No. J5469

Heavy Duty Hinge Handle• 610mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1/2”

Dri

ve S

ocke

t Acc

esso

ries


PART No. 14947

Extra Long Adjustable Offset Handles• Length: 600mm• Extra long handle for increased leverage• Chrome Molybdenum Head• Soft Feel Rubber Grip

PART No. 14948


PART No. 14935


PART No. 14937


PART No. 14941

Ell Handle• 190mm

PART No. 14945

Universal Joint• Swivel Ball Joint

PART No. 14946

Universal Joint• Link Joint with spring

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1/2”

Dri

ve S

ocke

t Acc

esso

ries


PART No. 14947


PART No. 14948


PART No. 14935


PART No. 14937


PART No. 14941

Ell Handle• 190mm

PART No. 14945

Universal Joint• Swivel Ball Joint

PART No. 14946

Universal Joint• Link Joint with spring




PART No. 14925

Extension• Double Male• 40mm

PART No. 19156


Repair KitsPART No. Description

44107 Repair Kit Suits 14906/14904 Ratchets

44114 Repair Kit Suits 14919 Microtough Ratchet

44166 Repair Kit Suits 14930/14931/14932 Offset Handles

44167 Repair Kit Suits 14933 Offset Handle

70709-10 Repair Kit Suits 14947/14948 Extra Long Offset Handle

44208 Square Drive Assembly Suits 14949 Impact Bar

PART No. 70276


PART No. 19159


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1/2”

Dri

ve S

ocke

ts



14225 8mm

14226 9mm

14227 10mm

14228 11mm

14229 12mm

14230 13mm

14231 14mm

14232 15mm

14233 16mm

14234 17mm

14235 18mm

14236 19mm

14237 20mm

14238 21mm

14239 22mm

14240 23mm

14241 24mm

14242 25mm

14243 26mm

14244 27mm

14245 28mm

14246 29mm

14247 30mm

14248 31mm

14249 32mm


14425 3/8”

14426 7/16”

14427 1/2”

14428 9/16

14429 5/8”

14430 11/16”

14431 3/4”

14432 13/16”

14433 7/8”

14434 15/16”

14435 1”

14436 1-1/16”

14437 1-1/8”

14438 1-3/16”

14439 1-1/4”


14255 10mm

14256 11mm

14257 12mm

14258 13mm

14259 14mm

14260 15mm

14261 16mm

14262 17mm

14263 18mm

14264 19mm


14454 3/8”

14455 7/16”

14456 1/2”

14457 9/16”

14458 5/8”

14459 11/16”

14460 3/4”


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1/2”

Dri

ve S

ocke

ts



14225 8mm

14226 9mm

14227 10mm

14228 11mm

14229 12mm

14230 13mm

14231 14mm

14232 15mm

14233 16mm

14234 17mm

14235 18mm

14236 19mm

14237 20mm

14238 21mm

14239 22mm

14240 23mm

14241 24mm

14242 25mm

14243 26mm

14244 27mm

14245 28mm

14246 29mm

14247 30mm

14248 31mm

14249 32mm


14425 3/8”

14426 7/16”

14427 1/2”

14428 9/16

14429 5/8”

14430 11/16”

14431 3/4”

14432 13/16”

14433 7/8”

14434 15/16”

14435 1”

14436 1-1/16”

14437 1-1/8”

14438 1-3/16”

14439 1-1/4”


14255 10mm

14256 11mm

14257 12mm

14258 13mm

14259 14mm

14260 15mm

14261 16mm

14262 17mm

14263 18mm

14264 19mm


14454 3/8”

14455 7/16”

14456 1/2”

14457 9/16”

14458 5/8”

14459 11/16”

14460 3/4”





12 Point Spark PlugsPart No. Size

14445 5/8”

14446 13/16”

Metric Inhex SocketsPart No. Size

14280 6 x 60mm

14281 7 x 60mm

14282 8 x 60mm

14283 10 x 60mm

14284 12 x 60mm

14285 14 x 60mm

14286 17 x 60mm

14287 8 x 135mm

14288 10 x 135mm

AF Inhex SocketsPart No. Size

14470 3/16” x 60mm

14471 7/32” x 60mm

14472 1/4” x 60mm

14473 9/32” x 60mm

14474 5/16” x 60mm

14475 3/8” x 60mm

14476 1/2” x 60mm

14477 9/16” x 60mm

14478 5/8” x 60mm

Spline Type Inhex SocketsPart No. Size

14295 M6 x 60mm

14296 M8 x 110mm

14297 M10 x 110mm

14298 M12 x 110mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



3/4”

Dri

ve S

ocke

t Acc

esso

ries


PART No. 15950

Reversible Ratchet• 24 Tooth mechanism for a 15º arc swing• Reversible• Male• 500mm

PART No. 15954


PART No. 15955


PART No. 15956

Ell Handle• 400mm






Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



3/4”

Dri

ve S

ocke

t Acc

esso

ries


PART No. 15950

Reversible Ratchet• 24 Tooth mechanism for a 15º arc swing• Reversible• Male• 500mm

PART No. 15954


PART No. 15955


PART No. 15956

Ell Handle• 400mm









PART No. 15957

Universal Joint• Link Joint

PART No. 19158


PART No. 19160

Adaptor• 3/4” Female to 1” Male

Repair KitPART No. Description

44116 Suits 15950 Ratchet

44168 Suits 15954 Offset Handle

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



3/4”

Dri

ve S

ocke

ts



15715 19mm

15717 22mm

15718 24mm

15720 27mm

15722 30mm

15723 32mm

15725 36mm

15726 38mm

15727 41mm

15728 46mm

15729 50mm

15730 55mm


15800 3/4”

15801 13/16”

15802 7/8”

15803 15/16”

15804 1”

15805 1-1/16”

15806 1-1/8”

15807 1-3/16”

15808 1-1/4”

15809 1-5/16”

15810 1-3/8”

15811 1-7/16”

15812 1-1/2”

15813 1-5/8”

15814 1-11/16”

15815 1-3/4”

15816 1-13/16”

15817 1-7/8”

15818 2”


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



3/4”

Dri

ve S

ocke

ts



15715 19mm

15717 22mm

15718 24mm

15720 27mm

15722 30mm

15723 32mm

15725 36mm

15726 38mm

15727 41mm

15728 46mm

15729 50mm

15730 55mm


15800 3/4”

15801 13/16”

15802 7/8”

15803 15/16”

15804 1”

15805 1-1/16”

15806 1-1/8”

15807 1-3/16”

15808 1-1/4”

15809 1-5/16”

15810 1-3/8”

15811 1-7/16”

15812 1-1/2”

15813 1-5/8”

15814 1-11/16”

15815 1-3/4”

15816 1-13/16”

15817 1-7/8”

15818 2”



Impact Sockets

Impact SocketsYou’ll find Impact Sockets wherever electric or air powered tools are used to install or remove fasteners. Impact Sockets are designed to withstand higher torque and the force of impact tools in repetitive applications. ABW Impact Sockets range from 3/8” up to 2 1/2” square drives and are available in 6 and 12 point standard length, 6 point deep length, and 6 point universal. ABW offers both metric and AF size openings: metric size openings range from 7mm up to 170mm while AF sizes run from 3/16” through to 7”

Standard and Deep SocketsStandard length sockets are the most commonly used length because they are more suited for close, confined areas. Deep sockets are used on nuts with protruding bolts or to access a recessed fastener.

Power DriveOur Impact Sockets feature the PowerDrive fastening system. This system, means up to 20% more torque can be applied to the fastener. PowerDrive Impact Sockets are ideal for stubborn fasteners and also reduce the risk of fastener rounding.

This high performance design allows the socket to contact the fastener away from the corner while also dispersing stress over a larger area.

When you work with ABW Impact Sockets, you are working with premium tools designed to give you “The Professional Advantage”.

6 PointThe most commonly used Impact Sockets are 6 point (single-hex).They provide greater surface contact on a hex fastener which means more torque can be applied.


• Do not hold socket, universal joint or any other attachment whilepower tool is running.

• Do not use damaged socket. Replace.• Do not continue to hammer with an impact tool when the

fastener is tight.• Do not use hand sockets with power tools.

Featuring: PowerDrive® This system means up to 20% more torque can be applied to the fastener.

Relevant StandardsABW Impact Sockets are made of top grade chrome-molybdenum alloy steel only.

They are designed, manufactured and tested to the highest specifications to ensure unequaled quality. All Impact Sockets are made according to relevant American Federal Specifications GGC-W-600A, ANSI & DIN standards 3121 & 3129

12 Point12 point (double-hex) are only for use on fasteners that have a 12 point head. They must not be used on single hex fasteners.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



3/8”

Dri

ve Im

pact

Soc

kets

Impact Sockets

Imperial Long

MetricLong

A/F (“) PART No.5/16 X310L3/8 X312L7/16 X314L1/2 X316L9/16 X318L5/8 X320L11/16 X322L3/4 X324L

A/F (mm) PART No.7 X307ML 8 X308ML 9 X309ML 10 X310ML 11 X311ML 12 X312ML 13 X313ML 14 X314ML 15 X315ML 16 X316ML 17 X317ML 18 X318ML 19 X319ML 20 X320ML 21 X321ML 22 X322ML

Imperial Regular

MetricRegular

A/F (“) PART No.5/16 X310 3/8 X312 7/16 X314 1/2 X316 9/16 X318 5/8 X320 11/16 X322 3/4 X324 13/16 X326 7/8 X328

A/F (mm) PART No.7 X307M8 X308M9 X309M10 X310M11 X311M12 X312M13 X313M14 X314M15 X315M16 X316M17 X317M18 X318M19 X319M20 X320M21 X321M22 X322M

3/8” Drive Impact Sockets

ExtensionBars

UniversalJoint

LENGTH (mm) PART No.75 X3X-75125 X3X-125

A/F (“) PART No.3/8 X3UJB

In-Hex Drivers Adaptors

A/F (mm) PART No.4 X3H04M5 X3H05M6 X3H06M8 X3H08M10 X3H10M

SQUARE DRIVES PART No.3/8FX1/2M XAD3-4

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



3/8”

Dri

ve Im

pact

Soc

kets

Impact Sockets

Imperial Long

MetricLong

A/F (“) PART No.5/16 X310L3/8 X312L7/16 X314L1/2 X316L9/16 X318L5/8 X320L11/16 X322L3/4 X324L

A/F (mm) PART No.7 X307ML 8 X308ML 9 X309ML 10 X310ML 11 X311ML 12 X312ML 13 X313ML 14 X314ML 15 X315ML 16 X316ML 17 X317ML 18 X318ML 19 X319ML 20 X320ML 21 X321ML 22 X322ML

Imperial Regular

MetricRegular

A/F (“) PART No.5/16 X310 3/8 X312 7/16 X314 1/2 X316 9/16 X318 5/8 X320 11/16 X322 3/4 X324 13/16 X326 7/8 X328

A/F (mm) PART No.7 X307M8 X308M9 X309M10 X310M11 X311M12 X312M13 X313M14 X314M15 X315M16 X316M17 X317M18 X318M19 X319M20 X320M21 X321M22 X322M


ExtensionBars

UniversalJoint

LENGTH (mm) PART No.75 X3X-75125 X3X-125


In-Hex Drivers Adaptors

A/F (mm) PART No.4 X3H04M5 X3H05M6 X3H06M8 X3H08M10 X3H10M

SQUARE DRIVES PART No.3/8FX1/2M XAD3-4


1/2” Drive Im

pact Sockets

Impact Sockets


Imperial Regular

MetricRegular

A/F (“) PART No.5/16 X4103/8 X4127/16 X4141/2 X4169/16 X4185/8 X42011/16 X4223/4 X42413/16 X4267/8 X42815/16 X4301 X4321-1/16 X4341-1/8 X4361-3/16 X4381-1/4 X4401-5/16 X4421-3/8 X4441-7/16 X4461-1/2 X448

A/F (mm) PART No.8 X408M10 X410M11 X411M12 X412M13 X413M14 X414M15 X415M16 X416M17 X417M18 X418M19 X419M20 X420M21 X421M22 X422M23 X423M24 X424M25 X425M26 X426M27 X427M28 X428M29 X429M30 X430M32 X432M33 X433M36 X436M

Imperial Long

MetricLong

A/F (“) PART No.3/8 X412L7/16 X414L1/2 X416L9/16 X418L5/8 X420L11/16 X422L3/4 X424L13/16 X426L7/8 X428L15/16 X430L1 X432L1-1/16 X434L1-1/8 X436L1-3/16 X438L1-1/4 X440L1-5/16 X442L1-3/8 X444L1-7/16 X446L1-1/2 X448L

A/F (mm) PART No.10 X410ML11 X411ML12 X412ML13 X413ML14 X414ML15 X415ML16 X416ML17 X417ML18 X418ML19 X419ML20 X420ML21 X421ML22 X422ML23 X423ML24 X424ML25 X425ML26 X426ML27 X427ML28 X428ML29 X429ML30 X430ML32 X432ML36 X436ML

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1/2”

Dri

ve Im

pact

Soc

kets

Impact Sockets

ExtensionBars

UniversalJoint

LENGTH (mm) PART No.75 X4X-75 125 X4X-125 250 X4X-250460 X4X-460610 X4X-610


Double EndedSockets

Adaptors

A/F (“) (mm) PART No.“3/4”x13/16” X4-2426L19x21mm X4-1921ML

SQUARE DRIVES PART No.1/2Fx3/8M XAD4-3 1/2Fx3/4M XAD4-6

In-Hex DriversImperial

In-Hex DriversMetric

A/F (“) PART No.3/16 X4H067/32 X4H071/4 X4H089/32 X4H095/16 X4H103/8 X4H127/16 X4H141/2 X4H169/16 X4H185/8 X4H2011/16 X4H223/4 X4H24

A/F (mm) PART No.4 X4H04M5 X4H05M6 X4H06M7 X4H07M8 X4H08M9 X4H09M10 X4H10M12 X4H12M14 X4H14M17 X4H17M19 X4H19M

Double Hex

Double Hex

A/F (“) PART No.3/8 X412D7/16 X414D1/2 X416D9/16 X418D5/8 X420D11/16 X422D3/4 X424D13/16 X426D7/8 X428D15/16 X430D1 X432D1-1/16 X434D1-1/8 X436D1-3/16 X438D1-1/4 X440D1-5/16 X442D1-3/8 X444D1-7/16 X446D1-1/2 X448D

A/F (mm) PART No.12 X412MD13 X413MD14 X414MD15 X415MD16 X416MD17 X417MD18 X418MD19 X419MD21 X421MD24 X424MD

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1/2”

Dri

ve Im

pact

Soc

kets

Impact Sockets

ExtensionBars

UniversalJoint

LENGTH (mm) PART No.75 X4X-75 125 X4X-125 250 X4X-250460 X4X-460610 X4X-610


Double EndedSockets

Adaptors

A/F (“) (mm) PART No.“3/4”x13/16” X4-2426L19x21mm X4-1921ML

SQUARE DRIVES PART No.1/2Fx3/8M XAD4-3 1/2Fx3/4M XAD4-6



A/F (“) PART No.3/16 X4H067/32 X4H071/4 X4H089/32 X4H095/16 X4H103/8 X4H127/16 X4H141/2 X4H169/16 X4H185/8 X4H2011/16 X4H223/4 X4H24

A/F (mm) PART No.4 X4H04M5 X4H05M6 X4H06M7 X4H07M8 X4H08M9 X4H09M10 X4H10M12 X4H12M14 X4H14M17 X4H17M19 X4H19M

Double Hex

Double Hex

A/F (“) PART No.3/8 X412D7/16 X414D1/2 X416D9/16 X418D5/8 X420D11/16 X422D3/4 X424D13/16 X426D7/8 X428D15/16 X430D1 X432D1-1/16 X434D1-1/8 X436D1-3/16 X438D1-1/4 X440D1-5/16 X442D1-3/8 X444D1-7/16 X446D1-1/2 X448D

A/F (mm) PART No.12 X412MD13 X413MD14 X414MD15 X415MD16 X416MD17 X417MD18 X418MD19 X419MD21 X421MD24 X424MD


3/4” Drive Im

pact Sockets

Impact Sockets


Imperial Long

MetricLong

A/F (“) PART No.5/8 X620L3/4 X624L13/16 X626L7/8 X628L15/16 X630L1 X632L1-1/16 X634L1-1/8 X636L1-3/16 X638L1-1/4 X640L1-5/16 X642L1-3/8 X644L1-7/16 X646L1-1/2 X648L1-9/16 X650L1-5/8 X652L1-11/16 X654L1-3/4 X656L1-13/16 X658L1-7/8 X660L1-15/16 X662L 2 X664L2-1/16 X666L2-1/8 X668L

A/F (mm) PART No.17 X617ML18 X618ML19 X619ML21 X621ML 22 X622ML23 X623ML24 X624ML 25 X625ML26 X626ML 27 X627ML 28 X628ML 29 X629ML30 X630ML 31 X631ML32 X632ML 33 X633ML 34 X634ML35 X635ML 36 X636ML 37 X637ML38 X638ML 41 X641ML 42 X642ML46 X646ML 50 X650ML52 X652ML55 X655ML60 X660ML65 X665ML

Imperial Regular

MetricRegular

A/F (“) PART No.1/2 X6169/16 X6185/8 X62011/16 X622 3/4 X624 13/16 X626 7/8 X628 15/16 X630 1 X632 1-1/16 X634 1-1/8 X636 1-3/16 X638 1-1/4 X640 1-5/16 X642 1-3/8 X644 1-7/16 X646 1-1/2 X648 1-9/16 X650 1-5/8 X652 1-11/16 X654 1-3/4 X656 1-13/16 X658 1-7/8 X660 1-15/16 X662 2 X664 2-1/16 X6662-1/8 X6682-3/16 X670 2-1/4 X6722-5/16 X674 2-3/8 X676 2-7/16 X678 2-1/2 X680

A/F (mm) PART No.17 X617M18 X618M19 X619M 20 X620M 21 X621M 22 X622M 23 X623M 24 X624M 25 X625M 26 X626M 27 X627M 28 X628M 29 X629M 30 X630M31 X631M32 X632M 33 X633M 34 X634M 35 X635M 36 X636M 37 X637M38 X638M 40 X640M41 X641M 42 X642M46 X646M 48 X648M50 X650M 52 X652M54 X654M 55 X655M 56 X656M 60 X660M 63 X663M 65 X665M67 X667M

Double Hex

A/F (“) PART No.19 X619MD 24 X624MD 27 X627MD 30 X630MD 32 X632MD 36 X636MD 38 X638MD 41 X641MD

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



3/4”

Dri

ve Im

pact

Soc

kets

Impact Sockets

Extension Bars Universal Joint

LENGTH (mm) PART No.100 X6X-100 175 X6X-175 250 X6X-250 330 X6X-330


In-Hex Drivers Imperial In-Hex Drivers Metric

A/F (“) PART No.1/2 X6H16 9/16 X6H18 5/8 X6H20 3/4 X6H24 7/8 X6H28 1 X6H32

A/F (mm) PART No.10 X6H10M12 X6H12M 14 X6H14M 17 X6H17M 19 X6H19M 22 X6H22M 24 X6H24M 27 X6H27M

Adaptors

SQUARE DRIVES PART No.3/4x1/2M XAD6-43/4x1M XAD6-8

Combination Bud Wheel 4pt Bud Wheel

A/F (“) PART No.17Sqx35Hex X6B173521Sqx41Hex X6B2141M

A/F (“) PART No.17 X6B17M 19 X6B19M 20 X6B20M 21 X6B21M

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



3/4”

Dri

ve Im

pact

Soc

kets

Impact Sockets

Extension Bars Universal Joint

LENGTH (mm) PART No.100 X6X-100 175 X6X-175 250 X6X-250 330 X6X-330


In-Hex Drivers Imperial In-Hex Drivers Metric

A/F (“) PART No.1/2 X6H16 9/16 X6H18 5/8 X6H20 3/4 X6H24 7/8 X6H28 1 X6H32

A/F (mm) PART No.10 X6H10M12 X6H12M 14 X6H14M 17 X6H17M 19 X6H19M 22 X6H22M 24 X6H24M 27 X6H27M

Adaptors

SQUARE DRIVES PART No.3/4x1/2M XAD6-43/4x1M XAD6-8

Combination Bud Wheel 4pt Bud Wheel

A/F (“) PART No.17Sqx35Hex X6B173521Sqx41Hex X6B2141M

A/F (“) PART No.17 X6B17M 19 X6B19M 20 X6B20M 21 X6B21M


1” Drive Im

pact Sockets

Impact Sockets

1” Drive Impact Sockets

Imperial Long

MetricLong

A/F (“) PART No.11/16 X822L3/4 X824L13/16 X826L7/8 X828L15/16 X830L 1 X832L 1-1/16 X834L 1-1/8 X836L 1-3/16 X838L 1-1/4 X840L 1-5/16 X842L 1-3/8 X844L 1-7/16 X846L 1-1/2 X848L 1-9/16 X850L 1-5/8 X852L 1-11/16 X854L 1-3/4 X856L 1-13/16 X858L 1-7/8 X860L 1-15/16 X862L 2 X864L 2-1/16 X866L 2-1/8 X868L 2-3/16 X870L 2-1/4 X872L 2-5/16 X874L 2-3/8 X876L 2-1/2 X880L 2-9/16 X882L 2-5/8 X884L2-11/16 X886L2-3/4 X888L 2-13/16 X890L2-7/8 X892L2-15/16 X894L3 X896L3-1/8 X8100L3-1/4 X8104L3-3/8 X8108L3-1/2 X8112L3-5/8 X8116L3-3/4 X8120L3-7/8 X8124L4 X8128L4-1/8 X8132L4-1/4 X8136L4-1/2 X8144L

A/F (mm) PART No.19 X819ML20 X820ML21 X821ML 22 X822ML 23 X823ML24 X824ML 26 X826ML 27 X827ML 28 X828ML 29 X829ML 30 X830ML 32 X832ML 33 X833ML 34 X834ML 35 X835ML 36 X836ML 37 X837ML 38 X838ML 41 X841ML 42 X842ML 45 X845ML 46 X846ML 48 X848ML 50 X850ML 52 X852ML 54 X854ML 55 X855ML 58 X858ML 60 X860ML 63 X863ML 65 X865ML 70 X870ML 75 X875ML80 X880ML85 X885ML90 X890ML95 X895ML100 X8100ML105 X8105ML110 X8110ML115 X8115ML

Imperial Regular

MetricRegular

A/F (“) PART No.11/16 X8223/4 X82413/16 X8267/8 X82815/16 X8301 X8321-1/16 X8341-1/8 X8361-3/16 X8381-1/4 X8401-5/16 X8421-3/8 X8441-7/16 X8461-1/2 X8481-9/16 X8501-5/8 X8521-11/16 X8541-3/4 X8561-13/16 X8581-7/8 X8601-15/16 X8622 X8642-1/16 X8662-1/8 X8682-3/16 X8702-1/4 X8722-5/16 X8742-3/8 X8762-7/16 X8782-1/2 X8802-9/16 X8822-5/8 X8842-11/16 X8862-3/4 X8882-13/16 X8902-7/8 X892 2-15/16 X8943 X8963-1/8 X81003-1/4 X81043-3/8 X8108 3-1/2 X81123-5/8 X81163-3/4 X81203-7/8 X81244 X81284-1/8 X81324-1/4 X81364-1/2 X8144

A/F (mm) PART No.19 X819M20 X820M21 X821M22 X822M23 X823M24 X824M 25 X825M 26 X826M 27 X827M 28 X828M 29 X829M 30 X830M 31 X831M 32 X832M 33 X833M 34 X834M 35 X835M 36 X836M 37 X837M 38 X838M 39 X839M40 X840M 41 X841M 42 X842M 43 X843M 44 X844M 45 X845M 46 X846M 47 X847M 48 X848M 50 X850M 52 X852M 53 X853M 54 X854M 55 X855M 56 X856M 57 X857M 58 X858M 60 X860M 63 X863M 65 X865M 70 X870M 75 X875M 80 X880M85 X885M 90 X890M 95 X895M100 X8100M105 X8105M110 X8110M115 X8115M

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1” D

rive

Impa

ct S

ocke

ts

Impact Sockets



A/F (“) PART No.5/8 X8H20 3/4 X8H24 7/8 X8H28 1 X8H32

A/F (mm) PART No.14 X8H14M 17 X8H17M 19 X8H19M 22 X8H22M 24 X8H24M27 X8H27M30 X8H30M32 X8H32M

ExtensionBars

UniversalJoint

LENGTH (mm) PART No.175 X8X-175 250 X8X-250 330 X8X-330400 X8X-400

A/F (“) PART No.1 X8UJB

Adaptors

SQUARE DRIVES PART No.1Fx3/4M XAD8-6 1Fx1-1/2M XAD8-12 1-1/2Fx1M XAD12-8

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1” D

rive

Impa

ct S

ocke

ts

Impact Sockets



A/F (“) PART No.5/8 X8H20 3/4 X8H24 7/8 X8H28 1 X8H32

A/F (mm) PART No.14 X8H14M 17 X8H17M 19 X8H19M 22 X8H22M 24 X8H24M27 X8H27M30 X8H30M32 X8H32M

ExtensionBars

UniversalJoint

LENGTH (mm) PART No.175 X8X-175 250 X8X-250 330 X8X-330400 X8X-400

A/F (“) PART No.1 X8UJB

Adaptors

SQUARE DRIVES PART No.1Fx3/4M XAD8-6 1Fx1-1/2M XAD8-12 1-1/2Fx1M XAD12-8


1-1/2” Drive Im

pact Sockets

Impact Sockets

1-1/2” Drive Impact Sockets

ExtensionBars

UniversalJoint

LENGTH (mm) PART No.125 X12X-125 250 X12X-250 500 X12X-500

A/F (“) PART No.1-1/2 X12UJB

Imperial Regular

MetricRegular

A/F (“) PART No.1-7/16 X1246 1-1/2 X1248 1-9/16 X1250 1-5/8 X1252 1-11/16 X1254 1-3/4 X1256 1-13/16 X1258 1-7/8 X1260 1-15/16 X1262 2 X1264 2-1/16 X1266 2-1/8 X1268 2-3/16 X1270 2-1/4 X1272 2-5/16 X1274 2-3/8 X1276 2-7/16 X1278 2-1/2 X1280 2-9/16 X1282 2-5/8 X1284 2-11/16 X1286 2-3/4 X1288 2-13/16 X1290 2-7/8 X1292 2-15/16 X1294 3 X1296 3-1/16 X1298 3-1/8 X12100 3-3/16 X12102 3-1/4 X12104 3-5/16 X12106 3-3/8 X12108 3-7/16 X12110 3-1/2 X12112 3-9/16 X12114 3-5/8 X12116 3-11/16 X12118 3-3/4 X12120 4 X121284-1/16 X121304-1/8 X121324-3/16 X121344-1/4 X121364-5/16 X121384-3/8 X121404-7/16 X121424-1/2 X121444-5/8 X121484-3/4 X12152

A/F (mm) PART No.36 X1236M 38 X1238M 41 X1241M 42 X1242M 46 X1246M 50 X1250M 54 X1254M 55 X1255M 60 X1260M 63 X1263M 65 X1265M 70 X1270M 75 X1275M 77 X1277M 80 X1280M 85 X1285M 90 X1290M 95 X1295M 100 X12100M 105 X12105M 110 X12110M 115 X12115M 120 X12120M

Imperial Long

MetricLong

A/F (“) PART No.1-5/8 X1252L 1-11/16 X1254L 1-3/4 X1256L 1-13/16 X1258L 1-7/8 X1260L 1-15/16 X1262L 2 X1264L 2-1/16 X1266L 2-1/8 X1268L 2-3/16 X1270L 2-1/4 X1272L 2-5/16 X1274L 2-3/8 X1276L 2-7/16 X1278L 2-1/2 X1280L 2-9/16 X1282L 2-5/8 X1284L 2-11/16 X1286L 2-3/4 X1288L 2-13/16 X1290L 2-7/8 X1292L 2-15/16 X1294L

A/F (mm) PART No.41 X1241ML 42 X1242ML 46 X1246ML 50 X1250ML 54 X1254ML 55 X1255ML 60 X1260ML 63 X1263ML 65 X1265ML 70 X1270ML 75 X1275ML 77 X1277ML 80 X1280ML 85 X1285ML120 X12120ML

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



2-1/

2” D

rive

Impa

ct S

ocke

ts

Impact Sockets


Imperial Regular

MetricRegular

A/F (“) PART No.3 X2096 3-1/8 X20100 3-1/4 X20104 3-3/8 X20108 3-1/2 X20112 3-5/8 X20116 3-3/4 X20120 3-7/8 X20124 4 X20128 4-1/8 X20132 4-1/4 X20136 4-3/8 X20140 4-1/2 X20144 4-5/8 X20148 4-3/4 X20152 4-7/8 X20156 5 X20160 5-1/8 X20164 5-1/4 X20168 5-3/8 X20172 5-1/2 X20176 5-5/8 X20180 5-3/4 X20184 5-7/8 X20188 6 X20192 6-1/8 X20196 6-1/4 X20200 6-3/8 X20204 6-1/2 X20208 6-5/8 X20212 6-3/4 X20216 6-7/8 X20220 7 X20224

A/F (mm) PART No.75 X2075M 77 X2077M 80 X2080M 85 X2085M 90 X2090M 95 X2095M 100 X20100M 105 X20105M 110 X20110M 115 X20115M 120 X20120M 125 X20125M 130 X20130M 135 X20135M 140 X20140M 145 X20145M 150 X20150M 155 X20155M160 X20160M 165 X20165M 170 X20170M

ExtensionBars

UniversalJoint



Adaptors

SQUARE DRIVES PART No.2-1/2Fx1-1/2M XAD20-12

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



2-1/

2” D

rive

Impa

ct S

ocke

ts

Impact Sockets


Imperial Regular

MetricRegular

A/F (“) PART No.3 X2096 3-1/8 X20100 3-1/4 X20104 3-3/8 X20108 3-1/2 X20112 3-5/8 X20116 3-3/4 X20120 3-7/8 X20124 4 X20128 4-1/8 X20132 4-1/4 X20136 4-3/8 X20140 4-1/2 X20144 4-5/8 X20148 4-3/4 X20152 4-7/8 X20156 5 X20160 5-1/8 X20164 5-1/4 X20168 5-3/8 X20172 5-1/2 X20176 5-5/8 X20180 5-3/4 X20184 5-7/8 X20188 6 X20192 6-1/8 X20196 6-1/4 X20200 6-3/8 X20204 6-1/2 X20208 6-5/8 X20212 6-3/4 X20216 6-7/8 X20220 7 X20224

A/F (mm) PART No.75 X2075M 77 X2077M 80 X2080M 85 X2085M 90 X2090M 95 X2095M 100 X20100M 105 X20105M 110 X20110M 115 X20115M 120 X20120M 125 X20125M 130 X20130M 135 X20135M 140 X20140M 145 X20145M 150 X20150M 155 X20155M160 X20160M 165 X20165M 170 X20170M

ExtensionBars

UniversalJoint



Adaptors

SQUARE DRIVES PART No.2-1/2Fx1-1/2M XAD20-12


Impact Sockets

Socket Retaining Pins & O-Rings – ABW Powerdrive

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



Impact Sockets

RET-RING

RET-RING® one piece retaining rings were introduced to prevent serious injury & down-time caused by the dangers involved with the common two-piece socket retention systems.

• Suitable for use at rotational speeds of up to 5000 rpm• Solid pin section provides 75% more shear protection than previous hollow pin design• One-piece polyurethane retaining ring has a tensile strength of well over 5000psi.• Designed to allow easy installation and removal.

RET-RING* Socket Groove Diameter *Use with ABW Powerdrive Impact Sockets:

Part No. “ mm Metric Imperial

3/4” Drive: 3/4” Drive:

FLT 10005S 1-1/4” 31.75mm Std: X617M - X629MDeep: X617ML - X628ML

Std: X620 - X636Deep: X620L - X636L

FTL10032S 1-7/16” 36.51mm Std: X630M – X646MDeep: X630ML – X646ML

Std: X638 – X662Deep: X638L – X662L

FTL10034S 1-5/8” 41.27mm N/A* N/A*


Std: X664 – X680Deep: X664L – X668L

FTL18710S 2” 50.80mm N/A* N/A*

1” Drive: 1” Drive:


Std: X822 – X854Deep: X822L – X854L

FTL10010S 2” 50.80mm Std: X845M – X854MDeep: X845ML – X854ML

Std: X856 – X868Deep: X856L – X868L


Std: X870 – X892Deep: X870L – X892L

1-1/2” Drive: 1-1/2” Drive:


Std: X1246 – X12118Deep: X1252L – X1294L

RET-RING* Socket GrooveDiameter *Use with Proto Impact Sockets:

Part No. “ mm Description

JRR07523 1-5/8” 41mm PIN/RING RETAIN FOR 3/4” SKT


JRR10028 1-15/16” 49mm PIN/RING RETAIN FOR 1” SKT





JRR15046 3-1/8” 80mm PIN/RING RETAIN FOR 1-1/2” SKT




RETAINING RINGSOne piece construction with resin pin.

Retaining rings are used to help secure sockets onto drive tools. They are not intended to bear any load as the rotational forces are between the drive tool and the socket.

The resin crush gauge on the pin indicates when a socket or square drive is excessively worn and should be replaced.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



Impact Sockets

RET-RING

RET-RING® one piece retaining rings were introduced to prevent serious injury & down-time caused by the dangers involved with the common two-piece socket retention systems.

• Suitable for use at rotational speeds of up to 5000 rpm• Solid pin section provides 75% more shear protection than previous hollow pin design• One-piece polyurethane retaining ring has a tensile strength of well over 5000psi.• Designed to allow easy installation and removal.

RET-RING* Socket Groove Diameter *Use with ABW Powerdrive Impact Sockets:

Part No. “ mm Metric Imperial

3/4” Drive: 3/4” Drive:

FLT 10005S 1-1/4” 31.75mm Std: X617M - X629MDeep: X617ML - X628ML

Std: X620 - X636Deep: X620L - X636L


Std: X638 – X662Deep: X638L – X662L

FTL10034S 1-5/8” 41.27mm N/A* N/A*


Std: X664 – X680Deep: X664L – X668L

FTL18710S 2” 50.80mm N/A* N/A*

1” Drive: 1” Drive:


Std: X822 – X854Deep: X822L – X854L

FTL10010S 2” 50.80mm Std: X845M – X854MDeep: X845ML – X854ML

Std: X856 – X868Deep: X856L – X868L


Std: X870 – X892Deep: X870L – X892L

1-1/2” Drive: 1-1/2” Drive:


Std: X1246 – X12118Deep: X1252L – X1294L

RET-RING* Socket GrooveDiameter *Use with Proto Impact Sockets:

Part No. “ mm Description












RETAINING RINGSOne piece construction with resin pin.

Retaining rings are used to help secure sockets onto drive tools. They are not intended to bear any load as the rotational forces are between the drive tool and the socket.

The resin crush gauge on the pin indicates when a socket or square drive is excessively worn and should be replaced.


Impact Sockets

SOCKET HEX NEAREST SIZE ACROSS SOCKET ALTERNATIVE

FLATS (AF) SIZES SOCKET SIZE (INCHES) (BSW) (METRIC/INCHES) 0.340” 3/16” 11/32” +0.004”

0.445” 1/4” 7/16” -0.008” 0.525” 5/16” 17/32” +0.006” 0.600” 3/8” 19/32” -0.006” 0.710” 7/1 6” 18mm -0.001” 0.820” 1/2” 13/16” -0.008” 0.920” 9/16” 15/16” +0.017” 1.010” 5/8” 1” -0.010” 1.100” 11/16” 28mm +0.002” 1.200” 3/4” 31mm +0.020” 1.300” 7 8” 33mm -0.001” 1.390” 15/16” 35mm -0.012” 1.480” 1” 38mm +0.016” 1.670” 1 1/8” 1-11/16” +0.017” 1.860” 1 1/4” 1-7/8” +0.015” 2.050” 1 3/8” 52mm -0.003” 2.205” 1 1/2” 56mm +/-0.000” 2.410” 1 5/8” 2-7/16” +0.027” 2.580” 1 3/4” 2-9/16” -0.018” 2.760” 2” 70mm -0.004” 3.150” 2 1/4” 80mm +/-0.000” 3.550” 2 1/2” 90mm -0.007” 3.890” 2 3/4” 3-7/8” -0.015” 4.180” 3” 4-3/l6” +0.007” 4.530” 3 1/4” 115mm -0.003” 4.850” 31 2” 4-7/8” +0.025” 5.180” 3 3/4” 5.550” 4”

6.380” 4 1/2” 6-3/8” -0.005”

SOCKET SIZING CROSS REFERENCE CHART

IMPERIAL TO METRIC SOCKET HEX NEAREST SIZE ACROSS SOCKET ALTERNATIVE

FLATS (AF) SIZES SOCKET SIZE (INCHES) (INCHES) (METRIC) 0.187” 3/16”

0.219” 7/32” 5.5mm -0.003” 0.250” 1/4” 0.281” 9/32” 0.312” 5/16” 8mm +0.003” 0.344” 11/32” 9mm +0.010” 0.375” 3/8” 0.437” 7/16” 11mm -0.004” 0.469” 15/32” 12mm +0.003” 0.500” 1/2” 13mm +0.012” 0.531” 17/32” 0.562” 9/16” 0.594” 19/32” 15mm -0.003” 0.625” 5/8” 16mm +0.005” 0.687” 11/16” 0.750” 3/4” 19mm -0.002” 0.781” 25/32” 20mm +0.006” 0.812” 13/16” 21mm +0.015” 0.875” 7/8” 22mm -0.009” 0.937” 15/16” 24mm +0.008” 1.000” 1 1.062” 1-1/16” 27mm +0.001” 1.125” 1-1/8” 29mm +0.017” 1.187” 1-3/16” 30mm -0.006” 1.250” 1-1/4” 32mm +0.010” 1.312” 1-5/16” 33mm -0.013” 1.375” 1-3/S” 35mm +0.003” 1.437” 1-7/16” 37mm +0.020” 1.500” 1-1/2” 38mm -0.004” 1.562” 1-9/16” 40mm +0.013” 1.625” 1-5/8” 41mm -0.011” 1.687” 1-11/16” 43mm +0.006” 1.750” 1-3/4” 45mm +0.022” 1.812” 1-13/16” 46mm -0.001” 1.875” 1-7/8” 48mm +0.015” 1.937” 1-15/16” 49mm -0.008” 2.000” 2 2.062” 2-1/16” 52mm -0.015” 2.125” 2-1/8” 54mm +0.001” 2.187” 2-3/16” 56mm + 0.018” 2.250” 2-1/4” 57mm -0.006” 2.312” 2-5/16” 2.375” 2-3/8” 60mm -0.013” 2.437” 2-7/16” 62mm +0.004” 2.500” 2-1/2” 63mm -0.020” 2.562” 2-9/16” 65mm -0.003” 2.625” 2.5LB” 67mm +0.013” 2.687” 2-11/16” 2.750” 2-3/4” 70mm +0.006” 2.812” 2-13/16” 2.875” 2-7/8” 2.937” 2-15/16” 75mm +0.016” 3.000” 3 3.062” 3-1/16” 3.125” 3-1/8” 80mm +0.025” 3.187” 3-3/16” 3.250” 3-1/4” 3.312” 3-5/16” 3.375” 3-3/8” 3.437” 3-7/16” 3.500” 3/12” 3.562” 3-9/16” 90mm -0.019” 3.625” 3-5/8” 3.750” 3-3/4” 95mm -0.010” 3.812” 3-13/16” 3.875” 3-7/8” 3.937” 3-15/16” 100mm +/-0.000” 4.000” 4 4.062” 4-1/16” 4.125” 4-1/8” 105mm +0.009” 4.187” 4-3/16” 4.250” 4-1/4” 4.312” 4-5/16” 110mm +0.019” 4.375” 4-3/8” 4.437” 4-7/16” 4.500” 4-1/2” 115mm +0.027” 4.625” 4-5/8” 4.750” 4-3/4” 120mm -0.026” 4.875” 4-7/8” 5.000” 5 5.125” 5-1/8” 130mm -0.007” 5.250” 5-1/4” 5.375” 5-3/8” 5.437” 5-7/16” 5.500” 5-1/2” 140mm +0.012” 5.625” 5-5/8” 5.750” 5-3/4” 5.875” 5-7/8” 6.000” 6 6.125” 6-1/8” 150mm +0.030” 6.250” 6-1/4” 155mm -0.023” 6.375” 6-3/8” 6.500” 6-1/2” 165mm -0.004” 6.625” 6-5/8” 6.750” 6-3/4” 6.875” 6-7/8” 7.000” 7

METRIC TO IMPERIAL B.S.W. TO METRIC OR IMPERIAL SOCKET HEX NEAREST SIZE ACROSS SOCKET ALTERNATIVE

FLATS (AF) SIZES SOCKET SIZE (INCHES) (INCHES) (METRIC)

0.138” 3.5mm 0.1 57” 4mm 0.177” 4.5mm 0.197” 5mm 0.216” 5.5mm 7/32” +0.003” 0.236” 6mm 0.276” 7mm 0.315” 8mm 5/16” -0.003” 0.354” 9mm 0.394” 10mm 0.433” 11mm 7/16” +0.004” 0.472” 12mm 15/32” -0.003” 0.512” 13mm 0.551” 14mm 9/16” +0.011” 0.591” 15mm 19/32” +0.003” 0.630” 16mm 5/8” -0.005” 0.669” 17mm 0.709” 18mm 0.748” 19mm 3/4” +0.002” 0.787” 20mm 25/2” -0.006” 0.827” 21mm 0.866” 22mm 7/8” +0.009” 0.905” 23mm 0.945” 24mm 15/16” -0.008” 0.984” 25mm I” +0.016” 1.024” 26mm 1.063” 27mm 1-1/16” -0.001” 1.102” 28mm 1.142” 29mm 1.181” 30mm 1-3/16” +0.006” 1.220” 31mm 1.260” 32mm 1-1/4” -0.010” 1.299” 33mm 1-5/16” +0.013” 1.339” 34mm 1.378” 35mm 1-3/8” -0.003” 1.417” 36mm 1-7/16” +0.020” 1.457” 37mm 1.496” 38mm 1-1/2 +0.004” 1.535” 39mm 1.575” 40mm 1-9/16 -0.013” 1.614” 41mm 1-5/8 +0.011” 1.653” 42mm 1.693” 43mm 1-11/16” 0.006” 1.732” 44mm 1.772” 45mm 1.811” 46mm 1-13/16” +0.001” 1.850” 47mm 1.890” 48mm 1.929” 49mm +0.008” 1.968” 50mm 2.047” 52mm 2-1/16” +0.015” 2.126” 54mm 2-1/8” -0.001” 2.165” 55mm 2-3/16” +0.022” 2.205” 56mm 2-3/16” -0.018” 2.224” 57mm 2-1/4” +0.006” 2.283” 58mm 2.362” 60mm 2-3/8” +0.013” 2.441” 62mm 2-7/16” -0.004” 2.480” 63mm 2-1/2” +0.020” 2.559” 65mm 2-9/16” +0.003” 2.638” 67mm 2-5/8” -0.013” 2.756” 70mm 2-3/4” -0.006” 2.953” 75mm 2-15/16” -0.016” 3.150” 80mm 3.346” 85mm 3-3/8” +0.029” 3.543” 90mm 3-9/16” +0.019” 3.740” 95mm 3-3/4” +0.010” 3.937” 100mm 3-15/16” +/-.000” 4.134” 105mm 4-1/8” -0.009” 4.331” 110mm 4.527” 115mm 4-1/2” -0.027” 4.724” 120mm 4-3/4” +0.026” 4.92I” 125mm 5.116” 130mm 5-1/8” +0.007” 5.315” 135mm 5.512” 140mm 5-1/2” -0.012” 5.709” 145mm 5.905” 150mm 6.102” 155mm 6-1/8” +0.023” 6.300” 160mm 6.496” 165mm 6-1/2” +0.004” 6.693” 170mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Spanners & Wrenches


Sidchrome Torque PlusAll ring spanners and the ring end of Combination Ring and Open End Spanners (up to 32mm/1-1/4”) incorporate the TORQUEPLUSTM fastening system. This unique system allows greater contact with the flats of fasteners, providing greater torque to make tightening easier. Conventional Spanners damage fasteners by concentrating forces on the corners. Sidchrome TORQUEPLUSTM spanners spread force over a larger contact area, reducing rounding off and extending fastener life. Sidchrome TORQUEPLUSTM spanners are particularly useful on worn or rounded fasteners.

Antislip DesignTM

Sidchrome Open End Spanners and the open end of the Combination Ring & Open End Spanners (up to 32mm/1-1/4”) feature the innovative ANTI-SLIP DESIGN™. ANTI-SLIP DESIGN™ features a locking groove to prevent slippage and knuckle injury. The unique arc design increases surface contact by over 400%. This means increased torque is applied to the fastener resulting in fewer rounded fasteners meaning the job is faster and safer.


• Pull the wrench toward you. Do not push.• Do not use extenders or cheater bars.

• Tighten Adjustable Wrenches to fastener.• Strike striking/slugging wrenches squarely.

• Use correct size wrenches. Do not fractional wrenches on metric fasteners, or vice versa.

• Use the type of wrench that fits the job.• Use a box type wrench if possible.

• Maintain your balance.• Use a commercial lubricant on a corroded fastener.

• Do not use a damaged wrench. Replace.

Featuring: Torque Plus™ & AntiSlip™ Design The TORQUEPLUS™ system allows greater contact with the flats of fasteners. ANTI-SLIP DESIGN™ features a locking groove to prevent slippage and knuckle injury.


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Spanners & Wrenches


Sidchrome Torque PlusAll ring spanners and the ring end of Combination Ring and Open End Spanners (up to 32mm/1-1/4”) incorporate the TORQUEPLUSTM fastening system. This unique system allows greater contact with the flats of fasteners, providing greater torque to make tightening easier. Conventional Spanners damage fasteners by concentrating forces on the corners. Sidchrome TORQUEPLUSTM spanners spread force over a larger contact area, reducing rounding off and extending fastener life. Sidchrome TORQUEPLUSTM spanners are particularly useful on worn or rounded fasteners.

Antislip DesignTM

Sidchrome Open End Spanners and the open end of the Combination Ring & Open End Spanners (up to 32mm/1-1/4”) feature the innovative ANTI-SLIP DESIGN™. ANTI-SLIP DESIGN™ features a locking groove to prevent slippage and knuckle injury. The unique arc design increases surface contact by over 400%. This means increased torque is applied to the fastener resulting in fewer rounded fasteners meaning the job is faster and safer.


• Pull the wrench toward you. Do not push.• Do not use extenders or cheater bars.

• Tighten Adjustable Wrenches to fastener.• Strike striking/slugging wrenches squarely.

• Use correct size wrenches. Do not fractional wrenches on metric fasteners, or vice versa.

• Use the type of wrench that fits the job.• Use a box type wrench if possible.

• Maintain your balance.• Use a commercial lubricant on a corroded fastener.

• Do not use a damaged wrench. Replace.

Featuring: Torque Plus™ & AntiSlip™ Design The TORQUEPLUS™ system allows greater contact with the flats of fasteners. ANTI-SLIP DESIGN™ features a locking groove to prevent slippage and knuckle injury.


Page 93

Spanners Sets


Combination Sets

PART No: 22105

16 Piece Ring & Open End Spanner Set- Metric & AF8 Metric Spanners8, 10, 11, 12, 13, 14, 15, 17mm8 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4”

PART No: 22104

24 Piece Ring & Open End Spanner Set- Metric & AF12 Metric Spanners7, 8, 10, 11, 12, 13, 14, 15, 16, 17, 19, 22mm12 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16”

PART No: 22210

14 Piece Ring & Open End Spanner Set- Metric14 Metric Spanners6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

Combination Sets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Spanners Sets


Com

bina

tion

Sets

PART No: 22408

10 Piece Ring & Open End Spanner Set - AF10 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 15/16”

PART No: 22410

13 Piece Ring & Open End Spanner Set - AF13 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”

PART No: 22208

10 Piece Ring & Open End Spanner Set- Metric10 Metric Spanners8, 10, 11, 12, 13, 14, 16, 17, 18, 19mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Spanners Sets


Com

bina

tion

Sets

PART No: 22408

10 Piece Ring & Open End Spanner Set - AF10 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 15/16”

PART No: 22410

13 Piece Ring & Open End Spanner Set - AF13 AF Spanners1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1”

PART No: 22208

10 Piece Ring & Open End Spanner Set- Metric10 Metric Spanners8, 10, 11, 12, 13, 14, 16, 17, 18, 19mm

Page 95

Spanners Sets


Combination Sets

PART No: 22413

7 Piece Ring & Open End Spanner Set - AF7 AF Spanners1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2”

PART No: 22209

7 Piece Ring & Open End Spanner Set - Metric7 Metric Spanners21, 22, 24, 27, 30, 32, 36mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Spanners Sets


Gea

red

Wre

nch

Sets HighTorque72Tooth

mechanismdeliverslessthan5Ohandleswing,asopposedto30Oonconventionalspanners-upto45%strongerratchetmechanismthancomparableproducts.

Reversinglever(Standard&Stubbyonly)meansyoudon’thavetoturnthewrenchovertochangedirection.Thisalsoallowsustoincorporatea15Ooffsettotheringendforincreasedleverageandknuckleclearance.

PART No: 22204

5 Piece Flex-Head Geared Wrench Set - Metric5 Metric Wrenches - Reversible10, 11, 12, 13, 14mm180º flexible head

PART No: 22203

10 Piece Stubby Geared Wrench Set - Metric10 Metric Wrenches - Reversible10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

PART No: 22202

10 Piece Geared Wrench Set - Metric10 Metric Wrenches - Reversible10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

Geared Wrench Sets

Note:Do not use ring end to undo frozen/seized fasteners - this may cause damage to the ratchet mechanism and void warranty.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Spanners Sets


Gea

red

Wre

nch

Sets HighTorque72Tooth

mechanismdeliverslessthan5Ohandleswing,asopposedto30Oonconventionalspanners-upto45%strongerratchetmechanismthancomparableproducts.

Reversinglever(Standard&Stubbyonly)meansyoudon’thavetoturnthewrenchovertochangedirection.Thisalsoallowsustoincorporatea15Ooffsettotheringendforincreasedleverageandknuckleclearance.

PART No: 22204

5 Piece Flex-Head Geared Wrench Set - Metric5 Metric Wrenches - Reversible10, 11, 12, 13, 14mm180º flexible head

PART No: 22203

10 Piece Stubby Geared Wrench Set - Metric10 Metric Wrenches - Reversible10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

PART No: 22202

10 Piece Geared Wrench Set - Metric10 Metric Wrenches - Reversible10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

Geared Wrench Sets


Page 97

Spanners Sets


Geared W

rench Sets

PART No: 22403

7 Piece Stubby Geared Wrench Set - A/F7 AF Wrenches - Reversible3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”

PART No: 22402

7 Piece Geared Wrench Set - A/F7 AF Wrenches - Reversible3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”

PART No. 70526

Imperial Ratchet Ring Wrench SetContains 5 wrenches in a vinyl pouch: 1/4 x 5/16” 6pt3/8 x 7/16” 6pt1/2 x 9/16” 6pt5/8 x 11/16” 12pt3/4 x 7/8” 12pt

PART No. 70532

Metric Ratchet Ring Wrench SetContains 5 wrenches in a vinyl pouch: 7 x 8mm 6pt9 x 10mm 6pt11 x 12mm 6pt13 x 14mm 6pt15 x 17mm 12pt


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Spanners Sets


Ring

Spa

nner

Set

s

PART No: 21413

8 Piece Ring Spanner Set - AF8 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4, 13/16 x 7/8,15/16 x 1”, 1-1/8 x 1-1/4”

PART No: 21211

11 Piece Ring Spanner Set - Metric11 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23,24 x 27, 30 x 32mm

PART No: 21100

13 Piece Ring Spanner Set - Metric/AF7 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm6 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 3/4 x 7/8, 15/16 x 1”

Ring Spanner Sets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Spanners Sets


Ring

Spa

nner

Set

s

PART No: 21413

8 Piece Ring Spanner Set - AF8 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4, 13/16 x 7/8,15/16 x 1”, 1-1/8 x 1-1/4”

PART No: 21211

11 Piece Ring Spanner Set - Metric11 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23,24 x 27, 30 x 32mm

PART No: 21100

13 Piece Ring Spanner Set - Metric/AF7 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm6 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 3/4 x 7/8, 15/16 x 1”

Ring Spanner Sets

Page 99

Spanners Sets


Ring Spanner Sets

PART No: 21206

7 Piece Ring Spanner Set - Metric7 Metric Spanners 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm

PART No: 21412

6 Piece Ring Spanner Set - AF6 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4, 13/16 x 7/8”

PART No: 21202

6 Piece Flat Ring Spanner Set - Metric11 Metric Spanners - Extra Long, 0º Offset10 x 11, 12 x 14, 13 x 15, 16 x 18, 17 x 19, 22 x 24mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Spanners Sets


Ope

n En

d Sp

anne

r Set

s

PART No: 20412

7 Piece Open End Spanner Set - AF7 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8,15/16 x 1”

PART No: 20211

8 Piece Open End Spanner Set - Metric8 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22mm

PART No: 20213

11 Piece Open End Spanner Set - Metric11 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23,24 x 27, 30 x 32mm

PART No: 20411

9 Piece Open End Spanner Set - AF9 AF Spanners1/4 x 5/16, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 5/8 x 11/16, 11/16 x 3/4,13/16 x 7/8, 15/16 x 1”, 1-1/8 x 1-1/4”

Open End Spanner Sets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Spanners Sets


Ope

n En

d Sp

anne

r Set

s

PART No: 20412

7 Piece Open End Spanner Set - AF7 AF Spanners1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8,15/16 x 1”

PART No: 20211

8 Piece Open End Spanner Set - Metric8 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22mm

PART No: 20213

11 Piece Open End Spanner Set - Metric11 Metric Spanners6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23,24 x 27, 30 x 32mm

PART No: 20411

9 Piece Open End Spanner Set - AF9 AF Spanners1/4 x 5/16, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 5/8 x 11/16, 11/16 x 3/4,13/16 x 7/8, 15/16 x 1”, 1-1/8 x 1-1/4”

Open End Spanner Sets

Page 101

Spanners Sets


Flare Nut Spanner Sets

PART No: 21257

5 Piece Flare Nut Spanner Set - Metric5 Metric Spanners10 x 11, 12 x 13, 13 x 14, 15 x 17, 19 x 22mm

PART No: 21459

4 Piece Flare Nut Spanner Set - AF4 AF Spanners3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 3/4 x 7/8”

Flare Nut Spanner Sets

PART No: 13200

Crowfoot Wrenches - Metric10 piece metric set includes the following sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm.

PART No: 13400

Crowfoot Wrenches - AF7 piece A/F set includes the following sizes:3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Spanners & Wrenches


Com

bina

tion

Span

ners

Ring & Open End Spanners - Metric

PART No. Size

22215 22216 22217 22218 22219 22220 2222122222 22223 22224 22225 22226 22227 22228 22229 22230 22231 22232 22233 22236 22239 22240 22241 22242 22243 22244

6mm7mm8mm9mm10mm11mm12mm13mm14mm15mm16mm17mm18mm19mm20mm21mm22mm23mm24mm27mm30mm32mm36mm41mm46mm50mm

Ring & Open End Spanners - AF

PART No. Size

22415 22416 22417 22418 22419 22420 2242122422 22423 22424 22425 22426 2242722428 22429 22430 22431 22432 22433 22434 22435224362243722438 22439 22440

1/4”5/16”3/8”7/16”1/2”9/16”5/8”11/16”3/4”13/16”7/8”15/16”1”1-1/16”1-1/8”1-1/4”1-5/16”1-3/8”1-7/16”1-1/2”1-5/8”1-11/16”1-3/4”1-13/16”1-7/8”2”

Combination Spanners

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Spanners & Wrenches


Com

bina

tion

Span

ners

Ring & Open End Spanners - Metric

PART No. Size

22215 22216 22217 22218 22219 22220 2222122222 22223 22224 22225 22226 22227 22228 22229 22230 22231 22232 22233 22236 22239 22240 22241 22242 22243 22244

6mm7mm8mm9mm10mm11mm12mm13mm14mm15mm16mm17mm18mm19mm20mm21mm22mm23mm24mm27mm30mm32mm36mm41mm46mm50mm

Ring & Open End Spanners - AF

PART No. Size

22415 22416 22417 22418 22419 22420 2242122422 22423 22424 22425 22426 2242722428 22429 22430 22431 22432 22433 22434 22435224362243722438 22439 22440

1/4”5/16”3/8”7/16”1/2”9/16”5/8”11/16”3/4”13/16”7/8”15/16”1”1-1/16”1-1/8”1-1/4”1-5/16”1-3/8”1-7/16”1-1/2”1-5/8”1-11/16”1-3/4”1-13/16”1-7/8”2”

Combination Spanners

Page 103

Spanners & Wrenches


Geared W

renches

Reversible Geared Wrench - Metric

PART No. Size

22265222662226722268222692227022271222722227322274

10mm11mm12mm13mm14mm15mm16mm17mm18mm19mm

Reversible Geared Wrench Stubby - Metric

PART No. Size

22275222762227722278222792228022281222822228322284

10mm11mm12mm13mm14mm15mm16mm17mm18mm19mm

Geared WrenchFlex HeadPART No. Size

2228522286222872228822289

10mm11mm12mm13mm14mm

180 O f exible head

Reversible Geared Wrench - AF

PART No. Size

22462224632246422465224662246722468

3/8”7/16”1/2”9/16”5/8”11/16”3/4”

Reversible Geared Wrench Stubby - AF

PART No. Size

22469224702247122472224732247422475

3/8”7/16”1/2”9/16”5/8”11/16”3/4”

Geared Wrenches

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Spanners & Wrenches


Dou

ble

Ring

Spa

nner

s

Ring Spanners - Metric

PART No. Size

213002130121302213032130421305 2130621307213082130921310

6 x 7mm8 x 9mm10 x 11mm12 x 13mm14 x 15mm16 x 17mm18 x 19mm20 x 22mm21 x 23mm24 x 27mm30 x 32mm

Flat Ring Spanners

PART No. Size

213212132221323213242132521326

10 x 11mm12 x 14mm13 x 15mm16 x 18mm17 x 19mm22 x 24mm

Ring Spanners - AF

PART No. Size

21500215012150221503 21504 215052150621507215082150921510 21511

1/4 x 5/16”3/8 x 7/16”7/16 x 1/2”1/2 x 9/16”9/16 x 5/8”5/8 x 11/16”11/16 x 3/4”3/4 x 7/8”13/16 x 7/8”15/16 x 1”1” x 1-1/8”1-1/8 x 1-1/4”

Half Moon Ring Spanner - Metric

PART No. Size

2127221273

11 x 13mm14 x 16mm

Half Moon Ring Spanners - AF

PART No. Size

214692147021471

7/16 X 1/2”1/2 X 9/16”9/16 X 5/8”

Double Ring Spanners

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Spanners & Wrenches


Dou

ble

Ring

Spa

nner

s

Ring Spanners - Metric

PART No. Size

213002130121302213032130421305 2130621307213082130921310


Flat Ring Spanners

PART No. Size

213212132221323213242132521326

10 x 11mm12 x 14mm13 x 15mm16 x 18mm17 x 19mm22 x 24mm

Ring Spanners - AF

PART No. Size

21500215012150221503 21504 215052150621507215082150921510 21511

1/4 x 5/16”3/8 x 7/16”7/16 x 1/2”1/2 x 9/16”9/16 x 5/8”5/8 x 11/16”11/16 x 3/4”3/4 x 7/8”13/16 x 7/8”15/16 x 1”1” x 1-1/8”1-1/8 x 1-1/4”

Half Moon Ring Spanner - Metric

PART No. Size

2127221273

11 x 13mm14 x 16mm

Half Moon Ring Spanners - AF

PART No. Size

214692147021471

7/16 X 1/2”1/2 X 9/16”9/16 X 5/8”

Double Ring Spanners

Page 105

Spanners & Wrenches


Open End &

Flare Nut Spanners

Crowfoot Wrench

PART No. Size

13270 13271 13272 13273 13274 13275 13276 13277 13278 13279

10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm

Open End Spanners - AF

PART No. Size

20800208012080220803208042080520807208082080920810

1/4 x 5/16”3/8 x 7/16”7/16 x 1/2”1/2 x 9/16”5/8 x 11/16”11/16 x 3/4”13/16 x 7/8”15/16 x 1”15/16 x 1-1/16”1-1/8 x 1-1/4”

Flare Nut Spanners

PART No. Size

21700217012170221703

3/8 x 7/16”1/2 x 9/16”5/8 x 11/16”3/4 x 7/8”

Flare Nut Spanners

PART No. Size

2170421705217062170721708

10 x 11mm12 x 13mm13 x 14mm15 x 17mm 19 x 22mm

Open End Spanners - Metric

PART No. Size

2070020701207022070320704207052070620707207082070920710


Crowfoot Wrench

PART No. Size

13470 13471 13472 13473 13474 13475 13476

3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4”

Open End & Flare Nut Spanners

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Spanners & Wrenches


Slug

ging

Spa

nner

s

Super Heavy Duty 12 Point - Offset AFPART No. Description

JUSN321JUSN323JUSN326JUSN327JUSN329JUSN330JUSN332JUSN335JUSN338JUSN340JUSN341JUSN342JUSN344JUSN347JUSN348JUSN350JUSN354JUSN356JUSN360JUSN362JUSN366JUSN368JUSN372

Slugging Wrench Offset 1-5/16”Slugging Wrench Offset 1-7/16”Slugging Wrench Offset 1-5/8”Slugging Wrench Offset 1-11/16”Slugging Wrench Offset 1-13/16”Slugging Wrench Offset 1-7/8”Slugging Wrench Offset 2”Slugging Wrench Offset 2-3/16”Slugging Wrench Offset 2-3/8”Slugging Wrench Offset 2-1/2”Slugging Wrench Offset 2-9/16”Slugging Wrench Offset 2-5/8”Slugging Wrench Offset 2-3/4”Slugging Wrench Offset 2-15/16”Slugging Wrench Offset 3”Slugging Wrench Offset 3-1/8”Slugging Wrench Offset 3-3/8”Slugging Wrench Offset 3-1/2”Slugging Wrench Offset 3-3/4”Slugging Wrench Offset 3-7/8”Slugging Wrench Offset 4-1/8”Slugging Wrench Offset 4-1/4”Slugging Wrench Offset 4-1/2”

Super Heavy Duty 12 Point - Offset MetricPART No. Description

JHD032MJHD036MJHD041MJHD046MJHD050MJHD055MJHD060MJHD065MJHD070MJHD075MJHD080MJHD085MJHD090MJHD095MJHD100MJHD105MJHD110MJHD115M

Slugging Wrench Offset 32mmSlugging Wrench Offset 36mmSlugging Wrench Offset 41mmSlugging Wrench Offset 46mmSlugging Wrench Offset 50mmSlugging Wrench Offset 55mmSlugging Wrench Offset 60mmSlugging Wrench Offset 65mmSlugging Wrench Offset 70mmSlugging Wrench Offset 75mmSlugging Wrench Offset 80mmSlugging Wrench Offset 85mmSlugging Wrench Offset 90mmSlugging Wrench Offset 95mmSlugging Wrench Offset 100mmSlugging Wrench Offset 105mmSlugging Wrench Offset 110mmSlugging Wrench Offset 115mm

• Designed for heavy use in close quarters where hammer or sledge is required to loosen frozen nuts or set large fasteners.

• High strength rectangular design withstands heavy sledging; transmits power more effectively to fastener.

• Hot forged from special PROTOLOY™ alloy steel• Box opening designed to remain in place on fastener when wrench is struck.• Heavy box walls provide greater transmission of torque to fastener. • Handle design resists springing, nut turns easier. • Made in U.S.A. to Fed’l Specs: GGG-W-636E

Slugging Spanners

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Spanners & Wrenches


Slug

ging

Spa

nner

s

Super Heavy Duty 12 Point - Offset AFPART No. Description

JUSN321JUSN323JUSN326JUSN327JUSN329JUSN330JUSN332JUSN335JUSN338JUSN340JUSN341JUSN342JUSN344JUSN347JUSN348JUSN350JUSN354JUSN356JUSN360JUSN362JUSN366JUSN368JUSN372

Slugging Wrench Offset 1-5/16”Slugging Wrench Offset 1-7/16”Slugging Wrench Offset 1-5/8”Slugging Wrench Offset 1-11/16”Slugging Wrench Offset 1-13/16”Slugging Wrench Offset 1-7/8”Slugging Wrench Offset 2”Slugging Wrench Offset 2-3/16”Slugging Wrench Offset 2-3/8”Slugging Wrench Offset 2-1/2”Slugging Wrench Offset 2-9/16”Slugging Wrench Offset 2-5/8”Slugging Wrench Offset 2-3/4”Slugging Wrench Offset 2-15/16”Slugging Wrench Offset 3”Slugging Wrench Offset 3-1/8”Slugging Wrench Offset 3-3/8”Slugging Wrench Offset 3-1/2”Slugging Wrench Offset 3-3/4”Slugging Wrench Offset 3-7/8”Slugging Wrench Offset 4-1/8”Slugging Wrench Offset 4-1/4”Slugging Wrench Offset 4-1/2”

Super Heavy Duty 12 Point - Offset MetricPART No. Description

JHD032MJHD036MJHD041MJHD046MJHD050MJHD055MJHD060MJHD065MJHD070MJHD075MJHD080MJHD085MJHD090MJHD095MJHD100MJHD105MJHD110MJHD115M

Slugging Wrench Offset 32mmSlugging Wrench Offset 36mmSlugging Wrench Offset 41mmSlugging Wrench Offset 46mmSlugging Wrench Offset 50mmSlugging Wrench Offset 55mmSlugging Wrench Offset 60mmSlugging Wrench Offset 65mmSlugging Wrench Offset 70mmSlugging Wrench Offset 75mmSlugging Wrench Offset 80mmSlugging Wrench Offset 85mmSlugging Wrench Offset 90mmSlugging Wrench Offset 95mmSlugging Wrench Offset 100mmSlugging Wrench Offset 105mmSlugging Wrench Offset 110mmSlugging Wrench Offset 115mm

• Designed for heavy use in close quarters where hammer or sledge is required to loosen frozen nuts or set large fasteners.

• High strength rectangular design withstands heavy sledging; transmits power more effectively to fastener.

• Hot forged from special PROTOLOY™ alloy steel• Box opening designed to remain in place on fastener when wrench is struck.• Heavy box walls provide greater transmission of torque to fastener. • Handle design resists springing, nut turns easier. • Made in U.S.A. to Fed’l Specs: GGG-W-636E

Slugging Spanners

Page 107

Spanners & Wrenches


Podger Bars

Stubby Ratchet Podger Bars

• Dual sized ratchet head with reversible lever action• Robust construction with easy to clean ratchet assembly• Taper end for ease of bolt hole alignment

PART No. Description Length

RH1924SRH2124S

Riggers Ratchet Podger Bar Stubby BentScaffolders Ratchet Podger Bar Stubby Bent

240mm240mm

Ratchet Podger Bars

• Dual sized ratchet head with reversible lever action• Robust construction with easy to clean ratchet assembly• Taper end for ease of bolt hole alignment


RH1012RH1417RH1824RH1921RH1924RH2427RH2430RH2732RH3036RH3236RH3641RG280RG315

Ratchet Podger BarRatchet Podger BarRatchet Podger BarRatchet Podger BarRatchet Podger BarRatchet Podger BarRatchet Podger BarRatchet Podger BarRatchet Podger BarRatchet Podger BarRatchet Podger BarRubber Podger Bar Handle 3/8”Rubber Podger Bar Handle 1/2”

240mm 280mm 315mm 315mm 360mm 360mm450mm 450mm 450mm 450mm 450mm280mm315mm

Podger Bars

PART No: J712S0

Adjustable Spud Wrench—Clik-Stop®

• Large jaw opening fits all nuts and bolts up to 11⁄2 inches.• Eliminates the need for carrying several fixed size wrenches.

Structural Wrenches - Offset Head

• Long offset handle provides greater leverage and clearance for knuckles and obstructions.• Hardened tapered handle aligns bolt and rivet holes.

PART No. Size Length

JC907JC908JC908AJC912

1-1/16”1/1/4”1-5/16”2”

430mm480mm480mm580mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Spanners & Wrenches


Adj

usta

ble

Wre

nche

s All Sidchrome Adjustable Wrenches are made from Chrome Vanadium Steel for superior strength and consistent reliability. The head is offset 22.5˚ , allowing wrench to be rotated a full 45˚ when reversed. Ergonomic handle ensures comfort and ease of use.

• Improved jaw capacity - non protruding Jaw shank• Longer and thinner jaws• Four-Thread knurl• Improved performance in confined spaces• Improved torque test results• Laser etched markings

BiG Mouth

SUPERWIDE OPENING

Black Finish Wrenches

PART No. Max Opening Length

25205252062520725208252092521025211

13mm19.2mm24.05mm29mm34mm43.12mm53mm

100mm150mm200mm250mm300mm375mm450mm

PART No: 25105

Adjustable Big Mouth Wrench• Effectively a 300mm wrench head on a 200mm wrench body• 39mm rated opening – 58% more than standard 200mm wrench• 35% lighter than standard 300mm wrench • Allows access where space is tight, but high torque is not necessary • Ideal for plumbing applications

Chrome Plated Wrenches


25110251112511225113251142511525116

13mm24mm30mm34mm41mm43.12mm53mm


Perfectly parallel jaw surfaces ensure perfect grip of nut.

Ergonomic handle design makes work easier and more efficient.

Every tool is individually inspected to Guarantee Total Customer Satisfaction.

CHROME VANADIUM steel.Great resistance, minimum wear,

unbeatable durability.

Four-Thread knurl

22.5º head angle makes wrench more usable in confined spaces (conventional adjustable wrenches have a 15º head angle)

Identification code. Full traceability.

Non-protrudingjaw shank. Greataccessibility in tight spaces.

Adjustable Wrenches

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Spanners & Wrenches


Adj

usta

ble

Wre

nche

s All Sidchrome Adjustable Wrenches are made from Chrome Vanadium Steel for superior strength and consistent reliability. The head is offset 22.5˚ , allowing wrench to be rotated a full 45˚ when reversed. Ergonomic handle ensures comfort and ease of use.

• Improved jaw capacity - non protruding Jaw shank• Longer and thinner jaws• Four-Thread knurl• Improved performance in confined spaces• Improved torque test results• Laser etched markings

BiG Mouth

SUPERWIDE OPENING

Black Finish Wrenches


25205252062520725208252092521025211

13mm19.2mm24.05mm29mm34mm43.12mm53mm


PART No: 25105

Adjustable Big Mouth Wrench• Effectively a 300mm wrench head on a 200mm wrench body• 39mm rated opening – 58% more than standard 200mm wrench• 35% lighter than standard 300mm wrench • Allows access where space is tight, but high torque is not necessary • Ideal for plumbing applications

Chrome Plated Wrenches


25110251112511225113251142511525116

13mm24mm30mm34mm41mm43.12mm53mm


Perfectly parallel jaw surfaces ensure perfect grip of nut.

Ergonomic handle design makes work easier and more efficient.

Every tool is individually inspected to Guarantee Total Customer Satisfaction.

CHROME VANADIUM steel.Great resistance, minimum wear,

unbeatable durability.

Four-Thread knurl

22.5º head angle makes wrench more usable in confined spaces (conventional adjustable wrenches have a 15º head angle)

Identification code. Full traceability.

Non-protrudingjaw shank. Greataccessibility in tight spaces.

Adjustable Wrenches

Page 109

Spanners & Wrenches


Pipe Wrenches

Adjustable Hook Spanner

• Designed for servicing collars, lock nut rings, and bearings

PART No.

Diameter Capacity

Hook Thickness

Hook Depth

L Weight Ibs.

JC471JC472JC474JC474AJC474B

3/4” to 2”1-1/4” to 3”2” to 4-3/4”4-1/2” to 6-1/4”6-1/8” to 8-3/4”

11/32”13/23”15/32”15/32”15/32”

1/8”5/32”3/16”1/4”5/16”

6-3/8”8-1/8”11-3/8”12-1/8”13-3/4”

.23

.431.031.071.40

Adjustable Face Spanner

• Designed for servicing seal and packing nuts on hydraulic cylinders.

PART No.

Max Capacity

Diameter of Pin B

Lenght of Pin C

L Weight Ibs.

JC482JC483JC484

2”3”4”

3/16”1/4”5/16”

1/4”1/4”1/2”

6-3/8”8-1/4”10-3/8”

.31

.521.02

Pipe Wrenches—Heavy Duty

• Forged steel jaw provides maximum strength.• Full floating hook jaw, provides instant grip, easy release.• Large knurl and power threads provide fast, positive jaw adjustment.

PART No. Max L Weight Ibs.

J812HDJ814HDJ818HDJ824HD

2”2”3-1/2”4”

12”14”18”24”

2.753.616.029.83

PART No: J801

Universal Chain Wrench• Fits any shape pipe.• Forged steel handle has deep milled teeth.• Chain capacity rating: 6,200 lbs.

Pipe Wrenches

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Fastening


ScrewdriversSidchrome’s broad line of professional screwdrivers offers a variety of shapes, sizes, and tips configurations to handle almost any screw turning operation. Screwdrivers are available in Slotted, Cabinet, Torx®, and Phillips® tip configurations. Both round and square shanks are offered. A selection of sets and screwdrivers accessories are also available.

All screwdrivers have an alloy steel shank, heat-treated the entire length to provide strength against twisting action. Tips are precision machined to ensure proper fit. Tip edges are ground to a precise width and thickness to properly fit the screw slot. Standard and cabinet tips are cross ground for consistent fit.


• Do not use pry, punch, chisel, scrape of otherwise misuse.• Fit screwdriver tip width and thickness to fastener slot size.

• Prevent slipping by keeping tools clean and free of oil and grease.• Only use Stanley® insulated 1000V screwdriver on electrical circuits.

Always turn power off. Standard screwdrivers have no insulation.

Torx®

Available in insert bit and screwdriver styles. Suitable for Standard, Tamperproof and TS (5 Point) Torx® fasteners.

TORX ® is a registered trademark of Camcar Division of Textron

* These parts have no connection with the proprietors of the registered trademarks.

Specialty fastening tools for a multitude of applicationsScribers, Mirrors, Magnets, Screw Extractors & Thread Files.

Hex KeysAvailable in T-Handle and L-Handle styles. Hex keys are precision formed ensuring a secure fastener fit. Ball point end allows you to drive a fastener on an angle - this is particularly useful when access to the fastener is partially blocked. All shafts are heat-treated for durability.


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Fastening


ScrewdriversSidchrome’s broad line of professional screwdrivers offers a variety of shapes, sizes, and tips configurations to handle almost any screw turning operation. Screwdrivers are available in Slotted, Cabinet, Torx®, and Phillips® tip configurations. Both round and square shanks are offered. A selection of sets and screwdrivers accessories are also available.

All screwdrivers have an alloy steel shank, heat-treated the entire length to provide strength against twisting action. Tips are precision machined to ensure proper fit. Tip edges are ground to a precise width and thickness to properly fit the screw slot. Standard and cabinet tips are cross ground for consistent fit.


• Do not use pry, punch, chisel, scrape of otherwise misuse.• Fit screwdriver tip width and thickness to fastener slot size.

• Prevent slipping by keeping tools clean and free of oil and grease.• Only use Stanley® insulated 1000V screwdriver on electrical circuits.

Always turn power off. Standard screwdrivers have no insulation.

Torx®

Available in insert bit and screwdriver styles. Suitable for Standard, Tamperproof and TS (5 Point) Torx® fasteners.

TORX ® is a registered trademark of Camcar Division of Textron

* These parts have no connection with the proprietors of the registered trademarks.

Specialty fastening tools for a multitude of applicationsScribers, Mirrors, Magnets, Screw Extractors & Thread Files.

Hex KeysAvailable in T-Handle and L-Handle styles. Hex keys are precision formed ensuring a secure fastener fit. Ball point end allows you to drive a fastener on an angle - this is particularly useful when access to the fastener is partially blocked. All shafts are heat-treated for durability.


Page 111

Fastening


Screwdrivers

PART No: 29102

10 Piece Ergonomic Screwdriver Set5 Phillips Screwdrivers75mm x #0, 75mm x #1, 40mm x #2, 100mm x #2, 150mm x #35 Standard Screwdrivers75mm x 3.2mm, 100mm x 4.75mm, 40mm x 6.35mm, 100mm x 6.35mm, 150mm x 7.9mm


425 x 175 x 52mm

Screwdrivers

Ergonomic Screwdrivers - Round Blade - Phillips Tip

PART No. Description

291792918029181291822918329184

75mm x #075mm x #140mm x #2100mm x #2200mm x #2150mm x #3

Ergonomic Screwdrivers - Standard Tip


291872918829189291902919129192291932919429195

75mm x 3.2mm, Round Blade, 100mm x 4.75mm, Round Blade, 150mm x 4.75mm, Round Blade, 200mm x 4.75mm, Round Blade, 40mm x 6.35mm, Square Blade, 100mm x 6.35mm, Round Blade, 250mm x 6.35mm, Round Blade, 150mm x 7.9mm, Round Blade, 200mm x 9.5mm. Round Blade,

Parallel TipParallel TipParallel TipParallel TipFlared TipFlared Tip Parallel TipFlared TipFlared Tip

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Fastening


Ratc

hetin

g Sc

rew

driv

ers

PART No. 70598

Ratcheting Screwdriver Bits Set• Offset handle allows access to tight areas• Spinner knob for quick run-up• Fingertip reverse selector• 10 assorted bits

PART No. 70675

Long Screwdriver• Long 24” (610mm) shaft to access hard to reach areas• Chrome blade with reinforced tip• Suits No. 2 Phillips

PART No. 70676

Long Screwdriver• Long 24” (610mm) shaft to access hard to reach areas• Chrome blade with reinforced tip• Suits 9/36” (7mm) Slot

PART No: 29300

16 Piece Ratcheting Screwdriver Set• Power & Precision combined• 1/4” Hex Drive - 130mm long knurled shaft • Ergonomic comfort handle• 45 tooth ratchet mechanism• Easy Load interchangeable Bit Magazines• Bits are S2 Nickel plated inc: – Phillips®: 1, 2, 3 – Pozidrive®: 1, 2, 3 – TORX®: 15, 20, 25 – Slotted: 4, 5.5 – Hex Head: 3, 4, 5 – 1/4” hex - 1/4” Square Drive adaptor

Ratcheting Screwdrivers

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Fastening


Ratc

hetin

g Sc

rew

driv

ers

PART No. 70598

Ratcheting Screwdriver Bits Set• Offset handle allows access to tight areas• Spinner knob for quick run-up• Fingertip reverse selector• 10 assorted bits

PART No. 70675

Long Screwdriver• Long 24” (610mm) shaft to access hard to reach areas• Chrome blade with reinforced tip• Suits No. 2 Phillips

PART No. 70676

Long Screwdriver• Long 24” (610mm) shaft to access hard to reach areas• Chrome blade with reinforced tip• Suits 9/36” (7mm) Slot

PART No: 29300

16 Piece Ratcheting Screwdriver Set• Power & Precision combined• 1/4” Hex Drive - 130mm long knurled shaft • Ergonomic comfort handle• 45 tooth ratchet mechanism• Easy Load interchangeable Bit Magazines• Bits are S2 Nickel plated inc: – Phillips®: 1, 2, 3 – Pozidrive®: 1, 2, 3 – TORX®: 15, 20, 25 – Slotted: 4, 5.5 – Hex Head: 3, 4, 5 – 1/4” hex - 1/4” Square Drive adaptor

Ratcheting Screwdrivers

Page 113

Fastening


Impact D

rivers & Hex Key Sets

PART No. 70552

Impact Driver Kit• Use with a hammer to loosen tight screws and bolts• Suits any 1/2” drive impact socket or 8mm hex screwdriver bit• Supplied with: 8mm, 10mm No. 2, No. 3

PART No. 70257

Power / Impact Screwdriving Bits Sets• 8 standard length bits, Phillips and slotted• Made from tough alloy steel• Use with power tools and impact drivers

Phillips ® is a registered trademark of the Phillips Screw Company.* These parts have no connection with the proprietors of the registered trademarks.

PART No: 29540

9 Piece Long Arm Ball Point Hex Key Set - AF9 AF Long Arm Ball Point Hex Keys5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8”

PART No: 29530

9 Piece Long Arm Ball Point Hex Key Set - Metric9 Metric Long Arm Ball Point Hex Keys1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

WorkingAngle

WorkingAngle

Impact Drivers & Hex Key Sets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Fastening


T-H

andl

e He

x Ke

ys

T Handle Hex Keys - Metric

• Individual T Handle Hex Keys are CARDED


295012950229503295042950529506295072950829509

2mm2.5mm3mm4mm5mm6mm7mm8mm10mm

WorkingAngle

PART No. 29550

8 Piece T Handle Hex Key Set - Metric

• Includes: 2, 2.5, 3, 4, 5, 6, 8, 10mm• One piece hex key for additional strength and durability• Ergonomic T handle design• Long ball point driver - Short standard hex driver• Ball point end allows you to drive a fastener on an angle - this is

particularly useful when access to the fastener is partially blocked

T Handle Hex Keys - AF



2951129512295132951429515295162951729518295192952029521

5/64”3/32”7/64”1/8”9/64”5/32”3/16”7/32”1/4”5/16”3/8”

PART No. 29560

10 Piece T Handle Hex Key Set - AF

• Includes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8” • One piece hex key for additional strength and durability• Ergonomic T handle design• Long ball point driver - Short standard hex driver• Ball point end allows you to drive a fastener on an angle - this is


WorkingAngle

T-Handle Hex Keys

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Fastening


T-H

andl

e He

x Ke

ys

T Handle Hex Keys - Metric



295012950229503295042950529506295072950829509

2mm2.5mm3mm4mm5mm6mm7mm8mm10mm

WorkingAngle

PART No. 29550

8 Piece T Handle Hex Key Set - Metric

• Includes: 2, 2.5, 3, 4, 5, 6, 8, 10mm• One piece hex key for additional strength and durability• Ergonomic T handle design• Long ball point driver - Short standard hex driver• Ball point end allows you to drive a fastener on an angle - this is


T Handle Hex Keys - AF



2951129512295132951429515295162951729518295192952029521

5/64”3/32”7/64”1/8”9/64”5/32”3/16”7/32”1/4”5/16”3/8”

PART No. 29560

10 Piece T Handle Hex Key Set - AF

• Includes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8” • One piece hex key for additional strength and durability• Ergonomic T handle design• Long ball point driver - Short standard hex driver• Ball point end allows you to drive a fastener on an angle - this is


WorkingAngle

T-Handle Hex Keys

Page 115

Fastening


Torx®

PART No. 70885

Mechanics Bit Set - 43 Piece• 42 Piece kit to suit Torx®, Spline and In-Hex fastener applications as

found on brake calipers, transmissions, engines and interiors• High quality S2 Alloy Steel• 10mm Hex bits in both standard (30mm) and long (75mm) bit lengths

CONTENTS INCLUDE:In-Hex 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mmSpline M5, M6, M8, M10, M12Torx® T20, T25, T27, T30, T40, T45, T50, T55, T60Bit Holders 10mm hex x 3/8” Square Drive Adaptor 10mm hex x 1/2” Square Drive Adaptor

PART No. 70309

Bits Set To Suit Tamper-Proof Torx® Screws• 1/4” hex drive Torx bits: T10, T15, T20, T25, T27, T30 & T40• 1/4” square drive bit holder• Handy plastic bit holder

TORX ® is a registered trademark of Camcar Division of Textron* These parts have no connection with the proprietors of the registered trademarks.

Torx®

PART No. 70307

Bits Set To Suit Torx® Screws• 1/4” hex drive Torx bits: T10, T15, T20, T25, T27, T30, T40, T45 & T50• 1/4” & 3/8” square drive bit holders• Handy plastic bit holder


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Fastening


Torx

®

PART No. 70930

TS Star Bits To Suit Tamper Proof ‘5 Point’ Torx® Fasteners• 1/4” hex bits suit 5 point Torx® sizes: TS10, TS15, TS20, TS25, TS27,

TS30, TS40• 1/4” square drive bit holder• To suit 5 point tamper proof fasteners used on late model vehicles eg. air

bag retaining screws• Plastic bit holder


Screwdrivers To Suit Torx® Screws• Get a handle on your Torx® screws with these convenient, comfortable

screwdrivers

Part No. Nominal Torx® Size

70310 T-6

70313 T-8H

70316 T-10

70320 T-15

70324 T-20

70328 T-25

70336 T-30

TORX ® is a registered trademark of Camcar Division of Textron.* These parts have no connection with the proprietors of the registered trademarks.

PART No. 70288

9 Piece Torx® Socket Set• 1/4” square drive sockets – E-6, E-7, E-8• 3/8” square drive sockets – E-10, E-12, E-14, E-16, E-18, E-20


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Fastening


Torx

®

PART No. 70930

TS Star Bits To Suit Tamper Proof ‘5 Point’ Torx® Fasteners• 1/4” hex bits suit 5 point Torx® sizes: TS10, TS15, TS20, TS25, TS27,

TS30, TS40• 1/4” square drive bit holder• To suit 5 point tamper proof fasteners used on late model vehicles eg. air

bag retaining screws• Plastic bit holder


Screwdrivers To Suit Torx® Screws• Get a handle on your Torx® screws with these convenient, comfortable

screwdrivers

Part No. Nominal Torx® Size

70310 T-6

70313 T-8H

70316 T-10

70320 T-15

70324 T-20

70328 T-25

70336 T-30

TORX ® is a registered trademark of Camcar Division of Textron.* These parts have no connection with the proprietors of the registered trademarks.

PART No. 70288

9 Piece Torx® Socket Set• 1/4” square drive sockets – E-6, E-7, E-8• 3/8” square drive sockets – E-10, E-12, E-14, E-16, E-18, E-20


Page 117

Fastening


Scribers Pick & Hook Sets

PART No. 70260

Double Pointed Scriber• Straight and 90° angle points• Heat-treated high carbon needle steel points• Large knurled handle for a sure, comfortable grip

PART No. 70265

Scriber, Pick And Hook Set• Magnetic pick-up in handle• 4 attachments• Self contained in a vinyl pouch

PART No. 70673

4-Piece Mini Pick And Hook Set• Ideal to assist with “O” ring removal• Average length 5” (127mm)• Contained in plastic tray

PART No. 70973

Cushion Grip Hook & Pick Set • 4 piece straight, complex, hook, right angle picks• Extra long – 245mm• Cushioned textured grip not affected by wet or oily hands• Ideal for marking metal, removing o-rings, retrieving small objects, fuse removal, separating wires, model making & hobby applications

Scribers Pick & Hook Sets

PART No. 70262

Tungsten Tipped Scriber• Tungsten carbide tip marks almost any surface• Handy pocket clip and magnet• Complete with safety cap

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Fastening


Insp

ectio

n M

irro

rs &

Lig

hts

PART No. 56010

Bend-A-Light• Semi-rigid shaft - holds its shape• Illuminates hard to access areas• Fits into a 5mm diameter opening• Overall length 375mm

Part No 56090Spare bulb

PART No. 70178

Telescopic Inspection Mirror• Pocket clip• Ball joint head swivels to any position• Mirror diameter: 7/8” (22mm)• Telescopic from 6-7/64” (155mm) to 18-9/16” (471mm)

PART No. 70180

Small Telescopic Inspection Mirror• Pocket clip• Ball joint head swivels to any position• Mirror diameter: 1-1/4” (32mm)• Telescopic from 6-1/2” (165mm) to 18-7/8” (479mm)

Inpsection Mirrors & Lights

PART No. 70184

Magnifying Telescopic Inspection Mirror• Magnifies image for detailed inspection• Ball joint head swivels to any position• Mirror diameter: 1-1/4” (32mm)• Telescopic from 6-1/2” (165mm) to 18-7/8” (479mm)

PART No. 70188

Large Telescopic Inspection Mirror• Ball joint head swivels to any position• Large mirror diameter: 2-1/4” (57mm) • Telescopic from 10” (254mm) to 14” (356mm)

PART No. 70190

Telescopic Inspection Mirror• Ball joint head swivels to any position• Large mirror size: 2-1/8” (54mm) x 3-1/2” (89mm) • Telescopic from 11-1/4” (286mm) to 15-1/4” (387mm)

PART No. 70186

Telescopic Inspection Mirror• Pocket clip• Ball joint head swivels to any position• Mirror size: 1” (25mm) x 2” (51mm)• Telescopic from 7-1/4” (184mm) to 19-11/16” (500mm)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Fastening


Insp

ectio

n M

irro

rs &

Lig

hts

PART No. 56010

Bend-A-Light• Semi-rigid shaft - holds its shape• Illuminates hard to access areas• Fits into a 5mm diameter opening• Overall length 375mm

Part No 56090Spare bulb

PART No. 70178

Telescopic Inspection Mirror• Pocket clip• Ball joint head swivels to any position• Mirror diameter: 7/8” (22mm)• Telescopic from 6-7/64” (155mm) to 18-9/16” (471mm)

PART No. 70180

Small Telescopic Inspection Mirror• Pocket clip• Ball joint head swivels to any position• Mirror diameter: 1-1/4” (32mm)• Telescopic from 6-1/2” (165mm) to 18-7/8” (479mm)

Inpsection Mirrors & Lights

PART No. 70184

Magnifying Telescopic Inspection Mirror• Magnifies image for detailed inspection• Ball joint head swivels to any position• Mirror diameter: 1-1/4” (32mm)• Telescopic from 6-1/2” (165mm) to 18-7/8” (479mm)

PART No. 70188

Large Telescopic Inspection Mirror• Ball joint head swivels to any position• Large mirror diameter: 2-1/4” (57mm) • Telescopic from 10” (254mm) to 14” (356mm)

PART No. 70190

Telescopic Inspection Mirror• Ball joint head swivels to any position• Large mirror size: 2-1/8” (54mm) x 3-1/2” (89mm) • Telescopic from 11-1/4” (286mm) to 15-1/4” (387mm)

PART No. 70186

Telescopic Inspection Mirror• Pocket clip• Ball joint head swivels to any position• Mirror size: 1” (25mm) x 2” (51mm)• Telescopic from 7-1/4” (184mm) to 19-11/16” (500mm)

Page 119

Fastening


Magnetic Pick-up Tools

PART No. 70166

Telescopic Magnet• Pocket clip• Powerful magnet• Telescopic from 5-1/4” (133mm) to 24-1/2” (622mm)

PART No. 70170

Telescopic Magnet• Pocket clip• Extremely powerful “Alnico” magnet• Telescopic from 6-11/16” (170mm) to 24-13/32” (620mm)

PART No. 70168

Flexible Aluminium Shaft Magnetic Pick-Up Tool• Bends and holds any position• Extra-powerful Neodymium-Iron-Boron magnet• Overall length 21-3/4” (552mm)

PART No. 70476

3-In-1 Pocket Magnet• Powerful pick up magnet with long 19-11/16” (500mm) telescopic shaft• Windscreen washer jet adjusting tool• Complete with ballpoint pen

PART No. 70172

Flexible Shaft Magnetic Pick-Up Tool• Bends and holds any position• Extremely powerful “Alnico” magnet• Overall length: 21” (533mm)

PART No. 70174

Telescopic Magnetic Pick-Up Tool• Ball joint head swivels to any position• Extremely powerful “Alnico” magnet• Telescopic from 16-3/4” (425mm) to 26-3/4” (679mm)

Magnetic Pick-Up Tools

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Fastening


Mag

netic

Pic

k-up

Too

ls

PART No. 70807

Power Tip 2.5lb Telescopic Magnet• Powerful magnet can lift up to 2.5lb (1.1kg)• Telescopic from 5-1/4” (130mm) to 24-1/2” (630mm)• Handy pocket clip

PART No. 70237

Flexible Pick-Up Tool• 4 claw type• Plunger-operated, flexible shaft• Can save hours of frustration• Length: 23-1/2” (597mm)

PART No. 70176

Magnetising And Demagnetising Tool• Adds and removes magnetism to screwdrivers and similar tools

PART No. 70808

Power Tip 5lb Telescopic Magnet• Powerful magnet can lift up to 5lb (2.2kg)• Telescopic from 5-3/8” (135mm) to 25-1/2” (647mm)• Handy pocket clip

PART No. 70540

Automatic Centre Punch• No hammer required – simply press down and accurately mark steel,

plastic, wood, etc.• Hardened tip for long life

PART No. 70457

Tip Drill Set• For carby jets, circuit boards, oxy tips, etc.• Magnetic cap stores drills inside handle and keeps them together outside• 12 drill sizes 0.55 to 1.6mm

Drill Number Size (Inches)52 .063554 .055056 .046558 .042060 .040062 .038064 .036066 .033068 .031070 .028072 .025074 .0225

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Fastening


Mag

netic

Pic

k-up

Too

ls

PART No. 70807

Power Tip 2.5lb Telescopic Magnet• Powerful magnet can lift up to 2.5lb (1.1kg)• Telescopic from 5-1/4” (130mm) to 24-1/2” (630mm)• Handy pocket clip

PART No. 70237

Flexible Pick-Up Tool• 4 claw type• Plunger-operated, flexible shaft• Can save hours of frustration• Length: 23-1/2” (597mm)

PART No. 70176

Magnetising And Demagnetising Tool• Adds and removes magnetism to screwdrivers and similar tools

PART No. 70808

Power Tip 5lb Telescopic Magnet• Powerful magnet can lift up to 5lb (2.2kg)• Telescopic from 5-3/8” (135mm) to 25-1/2” (647mm)• Handy pocket clip

PART No. 70540

Automatic Centre Punch• No hammer required – simply press down and accurately mark steel,

plastic, wood, etc.• Hardened tip for long life

PART No. 70457

Tip Drill Set• For carby jets, circuit boards, oxy tips, etc.• Magnetic cap stores drills inside handle and keeps them together outside• 12 drill sizes 0.55 to 1.6mm

Drill Number Size (Inches)52 .063554 .055056 .046558 .042060 .040062 .038064 .036066 .033068 .031070 .028072 .025074 .0225

Page 121

Fastening


Thread Maintenance

PART No. 70420

Screw Extractor Set• Removes broken studs, screws, bolts, pipes, etc.• 5 piece set for 1/8” to 3/8” drill size

Spare Part: 70420-11 3/16” Extractor

Thread Maintenance

PART No: J9500A

5 Piece Screw Extractor Set• Removes broken studs, screws, bolts, pipes, etc.• 5 piece set 1/8, 3 ⁄16, 7⁄32, 5 ⁄16, 3/8”• Vinyl Pouch

PART No: J9500B

10 Piece Screw Extractor Set• Removes broken studs, screws, bolts, pipes, etc.• 10 piece set for 1⁄8, 3 ⁄16, 7⁄32, 5 ⁄16, 3 ⁄8, 7⁄16, 17⁄32, 5 ⁄8, 3 ⁄4, 1”• Blow moulded box with drill bit slots

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Fastening


Thre

ad M

aint

enan

ce

PART No. 70553 MetricPART No. 70554 Imperial

Internal / External Thread Files• Restores damaged left or right-hand internal or external threads• Also makes an ideal thread gauge• Metric Thread Pitch: .80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00• Imperial UNC - UNF: TPI 11, 12, 13, 14, 15, 18, 20, 24

PART No. 70449 ImperialPART No. 70450 Metric

External Thread Files• Restores damaged left or right-hand external threads, any diameter• Ideal as a thread gauge• Metric Thread Pitch: .80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00• Imperial UNC - UNF: TPI 11, 12, 13, 14, 15, 18, 20, 24

PART No. 70920

“Turnout” Stud Extractor Kit• Designed to remove broken studs & bots with 5 to 16mm thread size • Removes broken fasteners without breaking or jamming • High torque levels possible without expanding the broken fastener• 5 LH HSS drills: 3.2, 4.8, 6.4, 8, 8.7mm• No.1 – No.5 Fluted Stud Extractors & turn out nuts D1 -D5 • 10 Guide bushes B1 – B10, to allow accurate centred drilling of

sunken or protruding fasteners• Manufactured from C4150 Alloy Steel • Contained in moulded storage case • All individuals available as spare parts

Stud Extractor Application ChartBolt Size

Pre-Drill Size -mm

Drill Size mm

Extractor Size

Turn Out Nut Size

Wrench Size -mm

M5 3.2 No.1 D1 10

M6 3.2 No.1 D1 10

M7 3.2 4.8 No.2 D2 11

M8 3.2 4.8 No.2 D2 11

M9 4.8 6.4 No.3 D3 13

M10 4.8 6.4 No.3 D3 13

M12 4.8 8 No.4 D4 14

M14 6.4 8.7 No.5 D5 17

M16 6.4 8.7 No.5 D5 17

Guide Bush ChartGuide Size

Bolt Size mm

Drill Size mm

B1 5 3.2

B2 6 3.2

B3 7 3.2

B4 8 3.2

B5 8 4.8

B6 9 4.8

B7 10 4.8

B8 11 4.8

B9 12 6.4

B10 14 6.4

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Fastening


Thre

ad M

aint

enan

ce

PART No. 70553 MetricPART No. 70554 Imperial

Internal / External Thread Files• Restores damaged left or right-hand internal or external threads• Also makes an ideal thread gauge• Metric Thread Pitch: .80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00• Imperial UNC - UNF: TPI 11, 12, 13, 14, 15, 18, 20, 24

PART No. 70449 ImperialPART No. 70450 Metric

External Thread Files• Restores damaged left or right-hand external threads, any diameter• Ideal as a thread gauge• Metric Thread Pitch: .80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00• Imperial UNC - UNF: TPI 11, 12, 13, 14, 15, 18, 20, 24

PART No. 70920

“Turnout” Stud Extractor Kit• Designed to remove broken studs & bots with 5 to 16mm thread size • Removes broken fasteners without breaking or jamming • High torque levels possible without expanding the broken fastener• 5 LH HSS drills: 3.2, 4.8, 6.4, 8, 8.7mm• No.1 – No.5 Fluted Stud Extractors & turn out nuts D1 -D5 • 10 Guide bushes B1 – B10, to allow accurate centred drilling of

sunken or protruding fasteners• Manufactured from C4150 Alloy Steel • Contained in moulded storage case • All individuals available as spare parts

Stud Extractor Application ChartBolt Size

Pre-Drill Size -mm

Drill Size mm

Extractor Size

Turn Out Nut Size

Wrench Size -mm

M5 3.2 No.1 D1 10

M6 3.2 No.1 D1 10

M7 3.2 4.8 No.2 D2 11

M8 3.2 4.8 No.2 D2 11

M9 4.8 6.4 No.3 D3 13

M10 4.8 6.4 No.3 D3 13

M12 4.8 8 No.4 D4 14

M14 6.4 8.7 No.5 D5 17

M16 6.4 8.7 No.5 D5 17

Guide Bush ChartGuide Size

Bolt Size mm

Drill Size mm

B1 5 3.2

B2 6 3.2

B3 7 3.2

B4 8 3.2

B5 8 4.8

B6 9 4.8

B7 10 4.8

B8 11 4.8

B9 12 6.4

B10 14 6.4

Page 123

Pliers & Striking


Pliers at a GlanceSidchrome offers a comprehensive range of pliers available to meet your every need. From multigrip, slipjoint, cutting, holding, locking, snap ring and electronic, Sidchrome Pliers are manufactured from high quality alloy steel and heat treated for maximum strength and durability. The cutting edges are induction hardened to meet international standards to ensure quality and safety. With Moulded Ergonomic Grips made from crack resistant, ultra violet stabilised, anti-scuffing Cellulose Butyrate, its no wonder Sidchrome Pliers are some of the most popular tools used by professionals.

Multigrip: special pivot allows adjustment to various positions along notched leg of pliers; serrated jaws for gripping curved surfaces and small components.

Slipjoint: designed for gripping and most useful in maintenance work

Snap Ring: used for installing or removing snap rings (aka Circlips or Retaining Rings). For extended life of the ring, do not compress or expand rings more than necessary. There are five individual snap ring pliers: straight and bent nose, internal and external to suit most popular snap ring sizes; and a flag tip version used on external snap rings with flared ends rather than holes.

Combination: versatile pliers with serrated flat jaw tips for gripping and twisting; serrated pipe grip for gripping cyclindrical objects; joint cutters for shearing off mild steel wires; and side cutting jaws for general cutting.

Diagonal Cutting: jaws set at an angle to shear off wires in confined spaces. Also useful for pulling and cutting to length.

Long Nose: tapered jaws with serrated gripping surface for bending and folding narrow strips of metal; holding small objects, reaching into confined spaces; side cutter for fine wires.

Locking: portable vice for holding work; jaws close on work when pliers are gripped closed; toggle action grips work without any hand pressure; grip small work in regular or odd shapes.

Electrician: feature wire crimper, cross hatched jaws for twisting wire, finer teeth in the burn hole to limit damage to insulation and longer handles for greater leverage in gripping and cutting.

Punches & Cold ChiselsSidchrome punches and cold chisels are manufactured with superior craftsmanship, forged from high quality steel and specially heat treated for strength and durability.

Sidchrome alloy steel cold chisels can be sharpened with a file, they are ideal for use on construction sites where grinding facilities may not be available.

Made in Australia


• Keep cutting edge of chisel away from hands and body.• Do not use a damaged punch or chisel. Replace.

• Stabalize work. Maintain balance.• Select a chisel or punch size that fits the job.

• Do not use a cold chisels on stone or concrete.• Do not use a cold chisels on materials that is harder than the

cutting edge of the chisel.• The striking face of a hammer should have a diameter at least twice as

large as the struck face of the tool.

Featuring: Heavy Duty Industrial Quality Tools

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Pliers & Striking


Plie

rs

Pliers

Multigrips - Vinyl Comfort Grip


28106 28107 28108

InterlockingInterlockingInterlocking

165mm250mm375mm

Combination Pliers - Moulded Ergonomic Grip

PART No. Length

2821028211 28212

160mm180mm200mm

Combination Electricians’ Plier


28215

Features wire crimper, longer side cutters, slimmer jaw silhouette, cross-hatched inner jaw to prevent damaging wire, extra long handles.

220mm



28110 Slip Joint 255mm

Electronic Mini Pliers


Electronic Mini Pliers - Stainless Steel

477904779147792477934779447795

Needle NoseBent Needle NoseRound NoseFlat NoseDiagonal CuttingMulti-Purpose

130mm125mm120mm130mm110mm120mm

Mini Plier with Return Spring

28405 Diagonal Cutting 125mm

PART No. 28465

6 Piece Electronic Mini Plier Set• Includes: Needle Nose, Bent Needle Nose, Round Nose, Flat Nose, Diagonal Cutting, Multi-Purpose pliers

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Pliers & Striking


Plie

rs

Pliers



28106 28107 28108

InterlockingInterlockingInterlocking

165mm250mm375mm

Combination Pliers - Moulded Ergonomic Grip

PART No. Length

2821028211 28212

160mm180mm200mm

Combination Electricians’ Plier


28215

Features wire crimper, longer side cutters, slimmer jaw silhouette, cross-hatched inner jaw to prevent damaging wire, extra long handles.

220mm



28110 Slip Joint 255mm

Electronic Mini Pliers


Electronic Mini Pliers - Stainless Steel

477904779147792477934779447795

Needle NoseBent Needle NoseRound NoseFlat NoseDiagonal CuttingMulti-Purpose

130mm125mm120mm130mm110mm120mm

Mini Plier with Return Spring

28405 Diagonal Cutting 125mm

PART No. 28465

6 Piece Electronic Mini Plier Set• Includes: Needle Nose, Bent Needle Nose, Round Nose, Flat Nose, Diagonal Cutting, Multi-Purpose pliers

Page 125

Pliers & Striking


Pliers

Diagonal Cutting Pliers - Moulded Ergonomic Grip

PART No. Length

2822528226 28227

140mm170mm200mm

2 Piece Internal-External Replaceable Tip Retaining Ring Pliers Kit• Services Retaining Ring Sizes: Internal: 7mm - 51mm (1/4 - 2”) External: 3mm - 51mm (1/8 - 2”)• Replaces 10 or more of any single competitor’s limited-use pliers• Patent pending• Made in U.S.A.


28350 2 Piece Internal/External Replaceable Tip Retaining Ring Pliers Kit

28353 Circlip Tip Kit

Long Nose Pliers - Moulded Ergonomic Grip

PART No. Length

282402824128242

140mm170mm200mm

End Cutting Nippers - Vinyl Comfort Grip

PART No. Length

28232 210mm

Snap Ring Pliers

PART No. Description Length Tip Diam.

Fits Ring for Shaft Diam

Internal

2830528306

Straight NoseBent Nose

180mm165mm

1.8mm1.8mm

27 to 44.5mm27 to 44.5mm

External

283102831128312

Straight NoseBent NoseFlag Tip

175mm160mm200mm

1.8mm1.8mm

23.8 to 36.5mm23.8 to 36.5mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Pliers & Striking


Lock

ing

Plie

rs

Locking Pliers

Curved Jaw Locking Pliers

• Curved jaws for gripping round and flat materials • Wire cutter • Drop forged premium quality Chrome Vanadium steel jaws • Use the screw to adjust pressure up or down to fit work • Screw stays adjusted for repeat use • Quick-release lever for one handed release • Precision manufactured teeth for positive grip to work

PART No. Length Jaw Capacity

28406284072840828409


30mm35mm50mm65mm

Versa Jaw Locking Pliers

• Combination jaw shape for gripping flat, round, square and shaped materials

• Drop forged premium quality Chrome Vanadium steel jaws • Use the screw to adjust pressure up or down to fit work • Screw stays adjusted for repeat use • Quick-release lever for one handed release • Precision manufactured teeth for positive grip to work


2841528416

180mm250mm

35mm50mm

Straight Jaw Locking Pliers

• Straight jaws for gripping flat materials • Drop forged premium quality Chrome Vanadium steel jaws • Use the screw to adjust pressure up or down to fit work • Screw stays adjusted for repeat use • Quick-release lever for one handed release • Precision manufactured teeth for positive grip to work


2840328404

180mm250mm

35mm40mm

Long Nose Locking Pliers

• For gripping in tight and tapering spaces • Wire cutter (240mm pliers only) • Drop forged premium quality Chrome Vanadium steel jaws • Use the screw to adjust pressure up or down to fit work • Screw stays adjusted for repeat use • Quick-release lever for one handed release • Precision manufactured teeth for positive grip to work


2841028411

165mm240mm

40mm55mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Pliers & Striking


Lock

ing

Plie

rs

Locking Pliers

Curved Jaw Locking Pliers

• Curved jaws for gripping round and flat materials • Wire cutter • Drop forged premium quality Chrome Vanadium steel jaws • Use the screw to adjust pressure up or down to fit work • Screw stays adjusted for repeat use • Quick-release lever for one handed release • Precision manufactured teeth for positive grip to work


28406284072840828409


30mm35mm50mm65mm

Versa Jaw Locking Pliers

• Combination jaw shape for gripping flat, round, square and shaped materials

• Drop forged premium quality Chrome Vanadium steel jaws • Use the screw to adjust pressure up or down to fit work • Screw stays adjusted for repeat use • Quick-release lever for one handed release • Precision manufactured teeth for positive grip to work


2841528416

180mm250mm

35mm50mm

Straight Jaw Locking Pliers

• Straight jaws for gripping flat materials • Drop forged premium quality Chrome Vanadium steel jaws • Use the screw to adjust pressure up or down to fit work • Screw stays adjusted for repeat use • Quick-release lever for one handed release • Precision manufactured teeth for positive grip to work


2840328404

180mm250mm

35mm40mm

Long Nose Locking Pliers

• For gripping in tight and tapering spaces • Wire cutter (240mm pliers only) • Drop forged premium quality Chrome Vanadium steel jaws • Use the screw to adjust pressure up or down to fit work • Screw stays adjusted for repeat use • Quick-release lever for one handed release • Precision manufactured teeth for positive grip to work


2841028411

165mm240mm

40mm55mm

Page 127

Pliers & Striking


Locking Pliers

Locking Sheet Metal Tool

• Powerful locking grip – for bending sheet metal • Drop forged premium quality Chrome Vanadium steel jaws • Use the screw to adjust pressure up or down to fit work • Screw stays adjusted for repeat use • Quick-release lever for one handed release • Throat depth 45mm – Jaw width 80mm


28419 180mm 40mm

Locking Chain Clamp

• Holds & locks around objects of varying size & shape • Use the screw to adjust pressure up or down to fit work • Screw stays adjusted for repeat use • Quick-release lever for one handed release • 150mm chain extension available (# 28450)

effectively doubling capacity


28417 250mm 150mm*

Locking Welding Clamp

• Holds work in correct alignment – even if material is of varying thickness • Use the screw to adjust pressure up or down to fit work • Screw stays adjusted for repeat use • Quick-release lever for one handed release • Throat depth 60mm – Jaw depth 80mm


28418 280mm 60mm

C Clamp Locking Pliers Swivel Pad

• Locking clamp adjusts in seconds – one handed quick release lever• C design gives clearance when clamping over items• Swivel pads grip uneven surfaces and apply parallel pressure• Ideal for repetitive applications when clamping metal, wood and plastic

items


2841228413

175mm275mm

40mm90mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Pliers & Striking


Lock

ing

Plie

rs

PART No. 70806

Wire Twisting Pliers - Economy• 6” (152mm) long• Auto spring return handles• Ideal for aviation, motor sport and electrical applications

PART No. 70543

Safety / Lock-Wire Twisting Pliers• 6” (152mm)• Automatic spring return• Ideal for aviation, motor sports and industry• Meets USA standards ANI/ASME B-107.18M• 9” model includes plastic jaw inserts to retain offcuts

Safety Lock Wire• Supplied in 1-lb (0.45kg) cans which uncoil from the side to prevent

tangling• Type 302/304 Stainless• MS20995C; MIL-W-6713; QQ-W-423 PART No. 70480 0.020” (.508mm) diaPART No. 70451 0.025” (.635mm) diaPART No. 70481 0.032” (.813mm) diaPART No. 70452 0.041” (1.04mm) dia

PART No. 70213 9” (229mm)


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Pliers & Striking


Lock

ing

Plie

rs

PART No. 70806

Wire Twisting Pliers - Economy• 6” (152mm) long• Auto spring return handles• Ideal for aviation, motor sport and electrical applications

PART No. 70543


Safety Lock Wire• Supplied in 1-lb (0.45kg) cans which uncoil from the side to prevent

tangling• Type 302/304 Stainless• MS20995C; MIL-W-6713; QQ-W-423 PART No. 70480 0.020” (.508mm) diaPART No. 70451 0.025” (.635mm) diaPART No. 70481 0.032” (.813mm) diaPART No. 70452 0.041” (1.04mm) dia

PART No. 70213 9” (229mm)


Page 129

Pliers & Striking


Punch & Chisel Set

Punch & Chisel Sets

PART No: 27320

Punch & Chisel Set – 6 pceCold Chisels: 12, 19mm Long Pin Punches: 3, 5mm Centre Punch: 5mm Starter Drift Punch: 6.5mm

PART No: 27321

Punch & Chisel Set – 13 pceCold Chisels: 12, 19, 25mmLong Pin Punches: 3, 4, 5, 6mmCentre Punches: 3, 4, 5, 6.5mmStarter Drift Punches: 3, 5mm

PART No: J46

26 Piece Punch And Chisel Set

• Weight: 8.91 lbs.

Description Tip Width Body Diameter Length

Center Punch — 3⁄8” 4-7⁄8”Center Punch — 1⁄2” 5-5 ⁄8”Prick Punch — 5⁄16” 5”Drive Pin Punch 5 ⁄64” 1⁄4” 4-3 ⁄16”Drive Pin Punch 7⁄64” 5 ⁄16” 5-1⁄4”Drive Pin Punch 5 ⁄32” 5 ⁄16” 5-9 ⁄16”Drive Pin Punch 11⁄64” 3 ⁄8” 5-7⁄8”Drive Pin Punch 13 ⁄64” 7⁄16” 6-3 ⁄8”Drive Pin Punch 15 ⁄64” 1⁄2” 6-3 ⁄4”Starting Punch 3 ⁄32” 1⁄4” 4-5 ⁄8”Starting Punch 1⁄8” 5 ⁄16” 5-1⁄8”Starting Punch 3 ⁄16” 3 ⁄8” 5-5 ⁄8”Starting Punch 7⁄32” 7⁄16” 6”Starting Punch 1⁄4” 1⁄2” 6-1⁄2”Cold Chisel 1⁄4” 3 ⁄16” 5”Cold Chisel 5 ⁄16” 1⁄4” 5-1⁄8”Cold Chisel 3 ⁄8” 5 ⁄16” 5-3 ⁄8”Cold Chisel 1⁄2” 7⁄16” 6”Cold Chisel 5 ⁄8” 1⁄2” 6-3 ⁄4”Cold Chisel 3 ⁄4” 19 ⁄32” 6-7⁄8”Cold Chisel 7⁄8” 23 ⁄32” 8”Cold Chisel 1” 13 ⁄16” 8-1⁄2”Cold Chisel 13 ⁄16” 15 ⁄16” 8-3 ⁄8”Drift Punch 1⁄8” 5 ⁄16” 10”Drift Punch 3 ⁄16” 3 ⁄8” 10”Drift Punch 1⁄4” 1⁄2” 10”

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Pliers & Striking


Punc

h Se

ts

PART No: 27105

5 Piece Centre Punch SetUsed in metal working, for marking lines, hole locations and pilot drill starting points. Centre Punches: 2, 2.5, 3, 4, 5mm

PART No: 27104

4 Piece Centre Punch SetUsed in metal working, for marking lines, hole locations and pilot drill starting points.Centre Punches: 6.5, 8, 10, 12mm

PART No: 27235

7 Piece Combination Punch SetCentre Punches: 8, 12mmLong Pin Punches: 6.5, 8, 10mmStarter Drift Punches: 8, 10mm

PART No: 27241

10 Piece Combination Punch SetCentre Punches: 3, 4, 5, 6.5mmLong Pin Punches: 3, 4, 5, 6mmStarter Drift Punches: 3, 5mm

PART No: 27130

5 Piece Nail Punch SetSetting nails below surface in woodworking, inserting putty and other fillers. Nail Punches: 2, 2.5, 3, 4, 5mm

Punch Sets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Pliers & Striking


Punc

h Se

ts

PART No: 27105

5 Piece Centre Punch SetUsed in metal working, for marking lines, hole locations and pilot drill starting points. Centre Punches: 2, 2.5, 3, 4, 5mm

PART No: 27104

4 Piece Centre Punch SetUsed in metal working, for marking lines, hole locations and pilot drill starting points.Centre Punches: 6.5, 8, 10, 12mm

PART No: 27235

7 Piece Combination Punch SetCentre Punches: 8, 12mmLong Pin Punches: 6.5, 8, 10mmStarter Drift Punches: 8, 10mm

PART No: 27241

10 Piece Combination Punch SetCentre Punches: 3, 4, 5, 6.5mmLong Pin Punches: 3, 4, 5, 6mmStarter Drift Punches: 3, 5mm

PART No: 27130

5 Piece Nail Punch SetSetting nails below surface in woodworking, inserting putty and other fillers. Nail Punches: 2, 2.5, 3, 4, 5mm

Punch Sets

Page 131

Pliers & Striking


Punch Sets

PART No: 27155

6 Piece Starter Drift Punch SetFor installing and removing pins and shafts. For aligning holes. Starter Drift Punches: 2, 3, 5, 6.5, 8, 10mm

PART No: 27190

7 Piece Short Pin Punch SetShort Pin Punches: 2, 2.5, 3, 4, 5, 6, 6.5mm

PART No: 27209

9 Piece Combination Pin Punch SetDriving out pins and rivets. Short Pin Punches: 2, 2.5, 3mmLong Pin Punches: 4, 5, 6, 6.5, 8, 10mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Pliers & Striking


Punc

h Se

ts

PART No: 27205

8 Piece Long Pin Punch SetLong Pin Punches: 2.5, 3, 4, 5, 6, 6.5, 8, 10mm

PART No: J47A

7 Piece Drive Pin Punch SetTwo piece design with parabolic struck end for resistance to mushrooming and chippingPin Punches: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4”

PART No: J48007

7 Piece Super-Duty Drive Pin Punch SetOne piece design with parabolic struck end for resistance to mushrooming and chippingPin Punches: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4”

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Pliers & Striking


Punc

h Se

ts

PART No: 27205

8 Piece Long Pin Punch SetLong Pin Punches: 2.5, 3, 4, 5, 6, 6.5, 8, 10mm

PART No: J47A

7 Piece Drive Pin Punch SetTwo piece design with parabolic struck end for resistance to mushrooming and chippingPin Punches: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4”

PART No: J48007

7 Piece Super-Duty Drive Pin Punch SetOne piece design with parabolic struck end for resistance to mushrooming and chippingPin Punches: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4”

Page 133

Pliers & Striking


Hollow

Punch Sets

PART No: 27173

5 Piece Hollow Punch SetPunching holes in leather, soft plastic, rubber sheet and gasket materials. Hollow Punches: 9, 10, 11, 12, 13mm

PART No: 27174

6 Piece Hollow Punch SetPunching holes in leather, soft plastic, rubber sheet and gasket materials.Hollow Punches: 3, 4, 5, 6, 7, 8mm

Hollow Punch Sets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Pliers & Striking


Cold

Chi

sel S

ets

PART No: 27303

3 Piece Cold Chisel SetCold Chisels: 12, 19, 25mm

PART No: 27305

5 Piece Cold Chisel SetCold Chisels: 12, 16, 19, 22, 25mm

Cold Chisel Sets

PART No: J86B

7 Piece Cold Chisel SetMade of hardened shock-resistant steelCold Chisels: 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8”

PART No: J86C

5 Piece Cold Chisel SetMade of hardened shock-resistant steelCold Chisels: 5/16, 3/8, 7/16, 1/2, 5/8”


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Pliers & Striking


Cold

Chi

sel S

ets

PART No: 27303

3 Piece Cold Chisel SetCold Chisels: 12, 19, 25mm

PART No: 27305

5 Piece Cold Chisel SetCold Chisels: 12, 16, 19, 22, 25mm

Cold Chisel Sets

PART No: J86B

7 Piece Cold Chisel SetMade of hardened shock-resistant steelCold Chisels: 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8”

PART No: J86C

5 Piece Cold Chisel SetMade of hardened shock-resistant steelCold Chisels: 5/16, 3/8, 7/16, 1/2, 5/8”


Page 135

Pliers & Striking


Punches & Chisels

Centre Punches27110 2711127112271132711427115271162711727118

100mm x 2mm100mm x 2.5mm100mm x 3mm100mm x 4mm100mm x 5mm125mm x 6.5mm125mm x 8mm150mm x 10mm150mm x 12mm

Nail Punches27135 27136271372713827139

100mm x 2mm100mm x 2.5mm100mm x 3mm100mm x 4mm100mm x 5mm

Starter Drift Punches271602716127162271632716427165

115mm x 2mm140mm x 3mm150mm x 5mm165mm x 6.5mm175mm x 8mm190mm x 10mm

Short Pin Punches27195 271962719727198271992720027201

100mm x 2mm100mm x 2.5mm100mm x 3mm100mm x 4mm100mm x 5mm100mm x 6mm100mm x 6.5mm

Long Pin Punches2721027211272122721327214272152721627217

155mm x 2.5mm155mm x 3mm160mm x 4mm165mm x 5mm170mm x 6mm175mm x 6.5mm175mm x 8mm175mm x 10mm

Hollow Punches2717527176271772717827179271802718127182271842718527186

88mm x 3mm92mm x 4mm95mm x 5mm100mm x 6mm104mm x 7mm109mm x 8mm114mm x 9mm120mm x 10mm125mm x 11mm131mm x 12mm137mm x 13mm

Cold Chisels2733027331273322733327334

150mm x 12mm175mm x 16mm200mm x 19mm230mm x 22mm250mm x 25mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Pliers & Striking


Ham

mer

s &

Pry

Bar

s

Hammers & Pry Bars

PART No. 70610

4 Piece Pry Bar Set• High Quality heat treated CRV steel blades• Oversized Tang Thru, dual compound Comfort Grip handles• Ideal for prying cylinder heads, manifolds, gearbox components etc • Supplied in a moulded tray • Also available individually

PART No: 27436

Club Hammer• 1.5kg• Graphite shaft• Rubber handle

Ball Pein Hammers• Tempered and hardened forged steel head• Genuine hickory handle

Part No. Size27431 274332743427435

225g (8oz)450g (16oz)680g (24oz)900g (32oz

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Pliers & Striking


Ham

mer

s &

Pry

Bar

s

Hammers & Pry Bars

PART No. 70610

4 Piece Pry Bar Set• High Quality heat treated CRV steel blades• Oversized Tang Thru, dual compound Comfort Grip handles• Ideal for prying cylinder heads, manifolds, gearbox components etc • Supplied in a moulded tray • Also available individually

PART No: 27436

Club Hammer• 1.5kg• Graphite shaft• Rubber handle

Ball Pein Hammers• Tempered and hardened forged steel head• Genuine hickory handle

Part No. Size27431 274332743427435

225g (8oz)450g (16oz)680g (24oz)900g (32oz

Page 137

Pliers & Striking


Pry Bars

Aligning Pry Bars

• Used for prying, positioning and aligning applications.

PART No. B L Weight Ibs.

J2116J2120J2124J2125

1/2”19/32”23/32”

7/8”

16”18”24”30”

.771.232.364.72

Rolling Head Bars

• Pry and aligning bar with a long pointed taper and 90° rolling head.

PART No. B L Weight Ibs.

J2126J2130

1/2”5/8”

12”16”

1.302.40

PART No. J2100

4 Piece Pry Bar Set

• 18 & 24” Aligning Pry Bars• 12 & 16” Rolling Head Bars

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Measuring



Sidchrome® Measuring Tool RangeThis range of measuring tools was selected to complement the Sidchrome® family of high quality tools. They were specifically designed to provide engineers & mechanics with measuring instruments that meet their professional requirements of: Precision, Accuracy & Durability at a affordable price.

All tools are manufactured to the highest quality standards & offer proven world class performance.

All measuring instruments are housed in shock proof & durable blow moulded cases to protect settings & ensure ongoing accuracy.

All Verniers meet or exceed DIN standard DIN862 – Micrometers meet or exceed DIN standard DIN863 – Dial Gauges meet or exceed ANSI standard ANSI B89.1.10

All measuring tools carry a 12 month warranty - initial calibration not covered

Deflecting beam Torque Wrenches - Precision ToolsThese world famous Dual-Signal torque wrenches employ the principle of applying torque to a deflecting beam rather than a coil spring. This helps to prolong wrench life, with a greater safety margin on maximum loading and provides more consistent and accurate readings throughout the range of each wrench.

Features dual Signal, rigidity, accuracy, repeatability and durability.Meets or exceeds Australian Standard AS4115-1993 and has an accuracy

of +/- 2% of settingAll wrenches supplied in sturdy blow-moulded caseAll wrenches supplied with a traceable inspection ticket Made in Australia

Micrometer Torque WrenchesThe accuracy of Sidchrome® Micrometer Torque Wrenches exceeds all International standards, with a traceable calibration certificate supplied with each wrench to satisfy ISO9000 quality systems.

The Sidchrome® Micrometer Torque Wrenches are accurate to within ± 3% of reading and are graduated in both Nm and ft/lb (26912 - in/lb) for foolproof and accurate setting.

Finally, Sidchrome Micrometer Torque Wrenches are supplied in blow moulded boxes to protect this most valuable investment.

Torque Wrench CareBeing a precise measuring device, these products require care when being handled. Place tool back in storage box after use. Never use hammers, cheater bars or other damaging objects on these tools. Sidchrome® recommends that all Micrometer Wrenches are stored at 20% of full reading to maintain accuracy. Don’t store Torque Wrench under full pre-set load. All Torque Wrenches should be recalibrated at least once a year.

Packaging SolutionsPrecision Instruments require special care and handling to keep them from becoming damaged in their work environment. All Sidchrome® measuring tools come packaged in durable, impact resistant and shock proof blow moulded cases designed to house and protect the precision measuring instrument within.

This guarantee does not cover product that has suffered impact damage, moisture damage or been misused, abused or subjected to normal wear

SafetyUse safety goggles. Serious eye injury is possible.

Do not cheater bars, hammers or other damaging objects.Do not exceed rated torque capacity of fastener or wrench.

Do not use torque wrench to break fasteners loose.Pull wrench towards you. Do not push.

Do not use torque multipliers with impact wrenches.Place reaction bars of torque multipliers against fixed, strong object.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Measuring



Sidchrome® Measuring Tool RangeThis range of measuring tools was selected to complement the Sidchrome® family of high quality tools. They were specifically designed to provide engineers & mechanics with measuring instruments that meet their professional requirements of: Precision, Accuracy & Durability at a affordable price.

All tools are manufactured to the highest quality standards & offer proven world class performance.

All measuring instruments are housed in shock proof & durable blow moulded cases to protect settings & ensure ongoing accuracy.

All Verniers meet or exceed DIN standard DIN862 – Micrometers meet or exceed DIN standard DIN863 – Dial Gauges meet or exceed ANSI standard ANSI B89.1.10

All measuring tools carry a 12 month warranty - initial calibration not covered

Deflecting beam Torque Wrenches - Precision ToolsThese world famous Dual-Signal torque wrenches employ the principle of applying torque to a deflecting beam rather than a coil spring. This helps to prolong wrench life, with a greater safety margin on maximum loading and provides more consistent and accurate readings throughout the range of each wrench.

Features dual Signal, rigidity, accuracy, repeatability and durability.Meets or exceeds Australian Standard AS4115-1993 and has an accuracy

of +/- 2% of settingAll wrenches supplied in sturdy blow-moulded caseAll wrenches supplied with a traceable inspection ticket Made in Australia

Micrometer Torque WrenchesThe accuracy of Sidchrome® Micrometer Torque Wrenches exceeds all International standards, with a traceable calibration certificate supplied with each wrench to satisfy ISO9000 quality systems.

The Sidchrome® Micrometer Torque Wrenches are accurate to within ± 3% of reading and are graduated in both Nm and ft/lb (26912 - in/lb) for foolproof and accurate setting.

Finally, Sidchrome Micrometer Torque Wrenches are supplied in blow moulded boxes to protect this most valuable investment.

Torque Wrench CareBeing a precise measuring device, these products require care when being handled. Place tool back in storage box after use. Never use hammers, cheater bars or other damaging objects on these tools. Sidchrome® recommends that all Micrometer Wrenches are stored at 20% of full reading to maintain accuracy. Don’t store Torque Wrench under full pre-set load. All Torque Wrenches should be recalibrated at least once a year.

Packaging SolutionsPrecision Instruments require special care and handling to keep them from becoming damaged in their work environment. All Sidchrome® measuring tools come packaged in durable, impact resistant and shock proof blow moulded cases designed to house and protect the precision measuring instrument within.

This guarantee does not cover product that has suffered impact damage, moisture damage or been misused, abused or subjected to normal wear

SafetyUse safety goggles. Serious eye injury is possible.

Do not cheater bars, hammers or other damaging objects.Do not exceed rated torque capacity of fastener or wrench.

Do not use torque wrench to break fasteners loose.Pull wrench towards you. Do not push.

Do not use torque multipliers with impact wrenches.Place reaction bars of torque multipliers against fixed, strong object.

Page 139

Measuring


Microm

eter & Verniers

PART No: 26107

0-75mm 3 Piece Micrometer SetContains 0-25mm, 25-50mm and 50-75mm micrometers.Graduation: 0.01mm. Black textured frame, Satin chrome finish on sleeve and thimble. Lapped carbide measuring faces, spindle lock, ratchet stop, zero adjustment with supplied wrench, micrometers over 25mm supplied with standard. Supplied in protective blow moulded case.

PART No: 26108

0-25mm Electronic Digital MicrometerRange: 0-25mm/1”. Resolution: 0.001mm/0.00005”. Large LCD display, RS232 data output. 5 keys to set zero, shift between absolute and relative measurement, turn power on/off, shift reading between mm and inch, data output. Automatic power off. Black textured frame, lapped carbide measuring faces, spindle lock, ratchet friction thimble. Comes with spare battery. Supplied in protective blow moulded case

PART No: 26103

0-25mm MicrometerPART No: 26104



75-100mm MicrometerGraduation: 0.01mm. Black textured frame, Satin chrome finish on sleeve and thimble. Lapped carbide measuring faces, spindle lock, ratchet stop, zero adjustment with supplied wrench, micrometers over 25mm supplied with standard. Supplied in protective blow moulded case

Micrometer & Verniers

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Measuring


Mic

rom

eter

& V

erni

ers

PART No: 26110

0-10mm Dial IndicatorRange: 0-10mm. Graduation: 0.01mm. Diameter of bezel: 60mm. Shank diameter: 8mm. With back lug and tolerance index. Supplied in protective blow moulded case.

PART No: 26111

0-1” Dial IndicatorRange: 1”. Graduation: 0.001”. Diameter of bezel: 60mm. Shank diameter: 8mm. Back lug and tolerance index. Supplied in protective blow moulded case.

PART No: 26112

0-10mm/0.5” Electronic Digital IndicatorRange: 0-10mm/0-0.5”. Resolution: 0.001mm/0.0001”, RS232 data output. 3 keys: in/mm (metric/inch conversion). OFF (power off), ZERO/ON (zero setting and power on). Shank diameter: 8mm. Back lug. Comes with spare battery. Supplied in protective blow moulded case.

PART No: 26109

Magnetic BaseAccepts all dial indicators having 8mm diameter shank and/or lug back with 6.5mm diameter mounting hole. Attaches to flat surface horizontally or vertically, V-groove base mounting on cylindrical surface. 60kgs. pull magnet and on-off switch, fine adjust arm. Supplied in protective blow moulded case - case designed to also house a dial indicator.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Measuring


Mic

rom

eter

& V

erni

ers

PART No: 26110

0-10mm Dial IndicatorRange: 0-10mm. Graduation: 0.01mm. Diameter of bezel: 60mm. Shank diameter: 8mm. With back lug and tolerance index. Supplied in protective blow moulded case.

PART No: 26111

0-1” Dial IndicatorRange: 1”. Graduation: 0.001”. Diameter of bezel: 60mm. Shank diameter: 8mm. Back lug and tolerance index. Supplied in protective blow moulded case.

PART No: 26112

0-10mm/0.5” Electronic Digital IndicatorRange: 0-10mm/0-0.5”. Resolution: 0.001mm/0.0001”, RS232 data output. 3 keys: in/mm (metric/inch conversion). OFF (power off), ZERO/ON (zero setting and power on). Shank diameter: 8mm. Back lug. Comes with spare battery. Supplied in protective blow moulded case.

PART No: 26109

Magnetic BaseAccepts all dial indicators having 8mm diameter shank and/or lug back with 6.5mm diameter mounting hole. Attaches to flat surface horizontally or vertically, V-groove base mounting on cylindrical surface. 60kgs. pull magnet and on-off switch, fine adjust arm. Supplied in protective blow moulded case - case designed to also house a dial indicator.

Page 141

Measuring


Microm

eter & Verniers

PART No: 26115

0-150mm/6” Electronic Digital CaliperPART No: 26116

0-200mm/8” Electronic Digital CaliperPART No: 26117

0-300mm/12” Electronic Digital CaliperResolution: 0.01mm/0.0005”. 3 keys: ON/OFF (power on and off). Zero (zero setting). mm/in (metric/inch conversion). 4-way measurements: inside, outside, step and depth. Hardened stainless steel construction, thumb wheel and lock screw. Comes with spare battery. Supplied in protective blow moulded case.

PART No: 26118

0-150mm/6” Dual Graduation Dial CaliperRange: 0-150mm/0-6”. Graduation: 0.02mm/0.001”.Reads both in metric and inch.4-way measurements: inside, outside, step and depth.Adjustable zero set with lock.Hardened stainless steel construction, satin chrome scale, thumb wheel and lock. Supplied in protective blow moulded case

PART No: 26113

150mm/0-6” Vernier CaliperPART No: 26114

0-200mm/8” Vernier CaliperGraduation: 0.02mm/0.001”.4-way measurements: inside, outside, step and depth.Hardened stainless steel construction, satin chrome scale, auto clamp. Supplied in protective blow moulded case.

PART No: 26119

6 Piece Telescopic Bore Gauge SetRange: 8-150mm, 5/16”-6”. Hardened stainless steel self-centering plunger’s, locks on any setting by turning knob at end of handle. Size obtained by measuring over contacts with a micrometer or caliper. Supplied in protective blow moulded case.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Measuring


Torq

ue W

renc

h - D

efle

ctin

g Be

am

Deflecting Beam Torque Wrenches - Dual-signal

THE DUAL SIGNAL PROCEDURE Thedeflectionbar(A)isbentbythetorquebeingapplied,thiscarriestheadjustablewedge(B)towardsthestationaryarm(C)inwhichthetrip(D)islocated.Whenthetripisdepressed(1)theindicatorpin(E)isreleased(2).Thissignalcanbeseenandheardbytheoperator.

PART No: 26922

1/2” Drive, 10-160Nm (10-120 ft/lb)• Graduation (English): 10in/lb• Graduation (Metric): 5Nm• Torque Range (Metric): 1-16kg-m• Graduation (Metric): .5kg-m

PART No: 26921

3/8” Drive, 5-110Nm (40-80 ft/lb)• Graduation (English): 2ft/lb• Graduation (Metric): 5Nm• Torque Range (Metric): 0.5-11kg-m• Graduation (Metric): .5kg-m

PART No: 26920

3/8” Drive, 1-22Nm (10-200 in/lb)• Graduation (English): 10in/lb• Graduation (Metric): 1Nm• Torque Range (Metric): 10-220kg-cm• Graduation (Metric): 10kg-cm

PART No: 26923


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Measuring


Torq

ue W

renc

h - D

efle

ctin

g Be

am

Deflecting Beam Torque Wrenches - Dual-signal

THE DUAL SIGNAL PROCEDURE Thedeflectionbar(A)isbentbythetorquebeingapplied,thiscarriestheadjustablewedge(B)towardsthestationaryarm(C)inwhichthetrip(D)islocated.Whenthetripisdepressed(1)theindicatorpin(E)isreleased(2).Thissignalcanbeseenandheardbytheoperator.

PART No: 26922


PART No: 26921

3/8” Drive, 5-110Nm (40-80 ft/lb)• Graduation (English): 2ft/lb• Graduation (Metric): 5Nm• Torque Range (Metric): 0.5-11kg-m• Graduation (Metric): .5kg-m

PART No: 26920

3/8” Drive, 1-22Nm (10-200 in/lb)• Graduation (English): 10in/lb• Graduation (Metric): 1Nm• Torque Range (Metric): 10-220kg-cm• Graduation (Metric): 10kg-cm

PART No: 26923


Page 143

Measuring


Torque Wrench - M

icrometer

PART No: 26912

3/8" Drive, 1-20Nm (10-180 in/lb)• Length - 215mm• High Quality 72 tooth ratchet allows use in confined spaces.

PART No: 26914

3/4" Drive, 80-400Nm (60-300 ft/lb)• Length - 682mm• New 3/4" drive, 60 position ratchet. • Handle materials and lens resist all chemicals in common automotive,

industrial and aviation use.• Wrench body tube has been extensively strengthened and proven

through cycle testing to withstand prolonged use at maximum Torque value.

PART No: 26915

1/2” Drive, 40-200Nm (30-150 ft/lb)• Length - 442mm• High quality, reversible ratchets allow work in confined areas.• Handle materials and lens resist all chemicals in common automotive,

industrial and aviation use.

PART No: 26917

1/2” Drive, 60-330Nm (45-250 ft/lb)• 60 tooth ratchet (industrial push through design)• Length: 683mm• Ideal for 6 & 8 cylinder cars & light trucks eg. Commodore harmonic

balance pulley

PART No: 26916

3/8” Drive, 20-100Nm (15-80 ft/lb)• 72 tooth ratchet (industrial push through design)• Length: 353mm• Ideal for small 4 cylinder cars & motorcycles, eg. Head studs on small 4

cylinder cars

PART No: 26913

3/8" Drive, 8-60Nm (5-45 ft/lb)• Length 307mm• High quality, reversible ratchets allow work in confined areas.• Handle materials and lens resist all chemicals in common automotive,

industrial and aviation use.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Air Tools



TW

O Y

EAR WARRAN

TY

WH

EN

USED IN CONJUNCTION WITH FRESH A

IR T

OO

L O

IL.

Sidchrome Air Tool RangeIncorporating the reliable low maintenance twin hammer and jumbo mechanisms is the strength of Sidchrome’s high quality impact tools.

The twin hammer has proven to be the most reliable impact mechanism ever produced; its minimal parts deliver maximum power output, efficiency, and smoothness of operation.

Sidchrome Air Impact tools are designed to be used on the toughest of jobs; they will remove even the most stubborn bolt, when nothing else will do the job. If you want the most durable high performing impact tools on the market, you can’t go past Sidchrome, the name that has meant quality to many generations of professional mechanics.

Sidchrome Twin Hammer DesignThe twin hammer has proven to be the most reliable impact mechanism ever produced; its minimal parts deliver maximum power output, efficiency, and smoothness of operation.

Sidchrome 2 Year Limited WarrantyA two year warranty applies when used with Sidchrome Fresh Air Tool Oil; without the use of Sidchrome Fresh Air Tool Oil - the standard one year warranty applies.





• Do not use Chrome sockets on impact tools.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Air Tools



TW

O Y

EAR WARRAN

TY

WH

EN

USED IN CONJUNCTION WITH FRESH A

IR T

OO

L O

IL.

Sidchrome Air Tool RangeIncorporating the reliable low maintenance twin hammer and jumbo mechanisms is the strength of Sidchrome’s high quality impact tools.

The twin hammer has proven to be the most reliable impact mechanism ever produced; its minimal parts deliver maximum power output, efficiency, and smoothness of operation.

Sidchrome Air Impact tools are designed to be used on the toughest of jobs; they will remove even the most stubborn bolt, when nothing else will do the job. If you want the most durable high performing impact tools on the market, you can’t go past Sidchrome, the name that has meant quality to many generations of professional mechanics.

Sidchrome Twin Hammer DesignThe twin hammer has proven to be the most reliable impact mechanism ever produced; its minimal parts deliver maximum power output, efficiency, and smoothness of operation.

Sidchrome 2 Year Limited WarrantyA two year warranty applies when used with Sidchrome Fresh Air Tool Oil; without the use of Sidchrome Fresh Air Tool Oil - the standard one year warranty applies.





• Do not use Chrome sockets on impact tools.

Page 145

Air Tools


Drills

PART No: SA-R12

1/2” Reversible DrillFree Speed: 1,200 RPM. Weight: 3.2 lbs./1.45kg. Chuck Size: 1/2"/13mm. Average Air Consumption: 4 cfm/113 1/min (@90 psi)

Exceeds nearest competitor in speed by 350 RPMCompact and lightweight

PART No: SA-R38

3/8” Reversible DrillFree Speed: 2,400 RPM. Weight: 2.7 lbs./1.33kg. Chuck Size: 3/8"/10mm. Average Air Consumption: 4 cfm/113 1/min (@90 psi)

Higher quality chucksCompact and lightweightReversible drills

PART No: SATO-250

Sidchrome Air Tool Oil 250mLReduced amount of lubricant required to lubricate the air tool providing: – Less oil in exhaust - cleaner breathing air – Less chance of soiling productionImproved anti-wear and low friction characteristics offer: – Less downtime - longer service life of vanes, cylinders and valves – Reduced warranty claims – Increased torque outputNon heavy metal based oil (USDA H2 Quality) – Approved for use in close quarters application where air tool oil can be harmful to the operator.

Drills

TW

O Y

EAR WARRAN

TY

TW

O Y

EAR WARRAN

TY

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Air Tools


Gri

nder

s, S

ande

rs, H

amm

ers

PART No: SA-ADG

Angle Die GrinderFree Speed: 20,000 RPM. Weight: 1.27 lbs./0.76kg. Length: 6.75"/168mm. Average Air Consumption: 3 cfm/85 1/min (@90 psi)

Right Angled HeadLong lasting ball bearing construction

PART No: SA-DG

Die GrinderFree Speed: 27,000 RPM. Weight: 1.161 lbs./0.53kg. Length: 5.63"/143mm. Average Air Consumption: 3 cfm/85 1/min (@90 psi)

Compact Self locking throttle lever

TW

O Y

EAR WARRAN

TY

PART No: SA-R06

6” Random Orbital Sander

Free Speed: 12,000 RPM. Weight: 1.92 lbs./0.87kg. Pad Diameter: 6"/168mm. Average Air Consumption: 8 cfm/226 1/min (@90 psi)

TW

O Y

EAR WARRAN

TY

PART No: SA-AH

Air HammerWeight: 3.5 lbs./1.59kg. Stroke Length: 2 9/32"/58mm. Shank Opening: 0.401"/10.1mm. Average Air Consumption: 3 cfm/85 1/min (@90 psi)

Up to 3,000 blows per minute

TW

O Y

EAR WARRAN

TY

TW

O Y

EAR WARRAN

TY

Grinders, Sanders, Hammers

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Air Tools


Gri

nder

s, S

ande

rs, H

amm

ers

PART No: SA-ADG

Angle Die GrinderFree Speed: 20,000 RPM. Weight: 1.27 lbs./0.76kg. Length: 6.75"/168mm. Average Air Consumption: 3 cfm/85 1/min (@90 psi)

Right Angled HeadLong lasting ball bearing construction

PART No: SA-DG

Die GrinderFree Speed: 27,000 RPM. Weight: 1.161 lbs./0.53kg. Length: 5.63"/143mm. Average Air Consumption: 3 cfm/85 1/min (@90 psi)

Compact Self locking throttle lever

TW

O Y

EAR WARRAN

TY

PART No: SA-R06

6” Random Orbital Sander

Free Speed: 12,000 RPM. Weight: 1.92 lbs./0.87kg. Pad Diameter: 6"/168mm. Average Air Consumption: 8 cfm/226 1/min (@90 psi)

TW

O Y

EAR WARRAN

TY

PART No: SA-AH

Air HammerWeight: 3.5 lbs./1.59kg. Stroke Length: 2 9/32"/58mm. Shank Opening: 0.401"/10.1mm. Average Air Consumption: 3 cfm/85 1/min (@90 psi)

Up to 3,000 blows per minute

TW

O Y

EAR WARRAN

TY

TW

O Y

EAR WARRAN

TY

Grinders, Sanders, Hammers

Page 147

Air Tools


Ratchets

PART No: SA-RW38S

3/8” Heavy Duty Stubby Ratchet WrenchMax Torque: 25 ft.lbs./34 Nm. Free Speed: 270 RPM.Weight: 1.75 lbs./0.79kg. Average Air Consumption: 4 cfm/113 1/min (@90 psi)

Offers the power and speed of larger tools

PART No: SA-RW38

3/8” Heavy Duty Ratchet WrenchMax Torque: 55 ft.lbs./74Nm. Free Speed: 160 RPM.Weight: 2.61 lbs./1.18kg. Average Air Consumption: 4 cfm/113 1/min (@90 psi)

Compact design

PART No: SA-RW38SHA

3/8” Heavy Duty Air Ratchet StubbyMax Torque: 20 ft.lbs./27 Nm. Free Speed: 200RPMWeight: 1.1lbs./0.5kg. Average Air Consumption: 2.5cfm/71 l/min. At Load 425 L/min. 1/4” Air Inlet. Min hose size 3/8”.

Our smallest air ratchet, only 6.5” longLightweight

PART No: SA-RW38H

3/8” Ultra Duty Ratchet WrenchMax Torque: 60 ft.lbs./81 Nm. Free Speed: 270 RPM.Weight: 2.5 lbs./1.2kg. Average Air Consumption: 4 cfm/113 1/min (@90 psi)High level durability

PART No: SA-RW12

1/2” Heavy Duty Ratchet WrenchMax Torque: 55 ft.lbs./74Nm. Free Speed: 160 RPM.Weight: 2.61 lbs./1.18kg. Average Air Consumption: 4 cfm/113 1/min (@90 psi)

Compact design

TW

O Y

EAR WARRAN

TY

TW

O Y

EAR WARRAN

TY

TW

O Y

EAR WARRAN

TY

TW

O Y

EAR WARRAN

TY

Ratchets

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Air Tools


Impa

ct

PART No: SA-500

1/2” Drive Impact WrenchMax Torque: 425 ft.lbs./575 Nm. Free Speed: 8,000 RPM.Weight: 5.8 lbs./2.63kg. Average Air Consumption: 4.2 cfm/119 1/min (@90 psi)

Best in class durability and performanceAdjustable power regulator Maximum reverse torque: 500ft/lbs

BEST IN CLASS FORDURABILITy AND PERFORMANCE.

TW

O Y

EAR WARRAN

TY

PART No: SA-500E

1/2” Drive Impact Wrench - Extended AnvilMax Torque: 425 ft.lbs./575 Nm. Free Speed: 8,000 RPM.Weight: 5.8 lbs./2.63kg. Average Air Consumption: 4.2 cfm/119 1/min (@90 psi)

Best in class durability and performanceAdjustable power regulatorMaximum reverse torque: 500ft/lbs50mm (2”) long anvil


TW

O Y

EAR WARRAN

TY

PART No: SA-600

1/2” Drive Impact Wrench – Extra Heavy DutyMax Torque: 450 ft.lbs./612 Nm. Free Speed: 9,500 RPM.Weight: 4.5 lbs./2.04kg. Average Air Consumption: 4.8 cfm/136 1/min (@90 psi)

No-tangle 360˚ swivel inletLight weight evenly balanced unit Maximum reverse torque: 600ft/lbs

TW

O Y

EAR WARRAN

TY

Impact

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Air Tools


Impa

ct

PART No: SA-500

1/2” Drive Impact WrenchMax Torque: 425 ft.lbs./575 Nm. Free Speed: 8,000 RPM.Weight: 5.8 lbs./2.63kg. Average Air Consumption: 4.2 cfm/119 1/min (@90 psi)

Best in class durability and performanceAdjustable power regulator Maximum reverse torque: 500ft/lbs


TW

O Y

EAR WARRAN

TY

PART No: SA-500E

1/2” Drive Impact Wrench - Extended AnvilMax Torque: 425 ft.lbs./575 Nm. Free Speed: 8,000 RPM.Weight: 5.8 lbs./2.63kg. Average Air Consumption: 4.2 cfm/119 1/min (@90 psi)

Best in class durability and performanceAdjustable power regulatorMaximum reverse torque: 500ft/lbs50mm (2”) long anvil


TW

O Y

EAR WARRAN

TY

PART No: SA-600

1/2” Drive Impact Wrench – Extra Heavy DutyMax Torque: 450 ft.lbs./612 Nm. Free Speed: 9,500 RPM.Weight: 4.5 lbs./2.04kg. Average Air Consumption: 4.8 cfm/136 1/min (@90 psi)

No-tangle 360˚ swivel inletLight weight evenly balanced unit Maximum reverse torque: 600ft/lbs

TW

O Y

EAR WARRAN

TY

Impact

Page 149

Air Tools


Impact

PART No: SA-1100

3/4” Drive Impact WrenchMax Torque: 1,100 ft.lbs./1,627 Nm. Free Speed: 7,250 RPM.Weight: 12.4 lbs./5.62kg.Average Air Consumption: 9.5 cfm/269 1/min (@90 psi)

Jumbo Hammer Mechanism Trouble-free, pressure-feed lube system

PART No: SA-1200

3/4” Ultra Duty Impact ToolMax Torque: 1200 ft.lbs (reverse). Working Torque range 200-900 ft lbs Free Speed: 7,250 RPM Weight: 7lbs./3.2kg. Average Air Consumption: 9.5 cfm/269 l/min At Load 1133 L/min. 3/8” Air Inlet. Min hose size 1/2”.

TwinHammer Plus mechanism for 30 percent greater durabilityErgonomically designed trigger & handle

PART No: SA-1000

1/2” Pistol Grip Impact Tool - Extreme DutyMax Torque: 625 ft.lbs./848 Nm. Free Speed: 9,500 RPM.Weight: 4.0 lbs./1.8kg. Average Air Consumption: 5 cfm/142 l/min (@90psi)

Enhanced Twin Hammer impact mechanismFour-position power regulation control7-vane motor delivers 1,000ft.lbs. of PEAK Torque and 700 ft.lbs. of traditional torque output

TW

O Y

EAR WARRAN

TY

TW

O Y

EAR WARRAN

TY

TW

O Y

EAR WARRAN

TY

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Air Tools


Impa

ct

SA-RW38S 3/8”5-25 ft-lb7-34 Nm

25 ft-lb34 Nm

270 rpm3/8”

10mm1.75 lbs0.79 kgs

7.5”190mm

4 cfm113 l/min

21 cfm608 l/min

89/102.21/4”

1/4”6mm

SA-RW38H 3/8”10-50 ft-lb14-68 Nm

60 ft-lb81 Nm

270 rpm3/8”

10mm2.53 lbs1.2 kgs

10.75”273mm

4 cfm113 l/min

16 cfm453 l/min

98/111 1/4”5/16”8mm

SA-RW38SHA 3/8” ??20 ft-lb27 Nm

200 rpm ??1.1 lbs0.5 kgs

6.5”165mm

2.5 cfm71 l/min

?? cfm425 l/min

?? 1/4”3/8”7mm

SA-RW38 3/8”9-45 ft-lb12-60 Nm

55 ft-lb74 Nm

160 rpm3/8”

10mm2.6 lbs

1.18 kgs10.75”273mm

4 cfm113 l/min

21 cfm608 l/min

89/102.2 1/4”5/16”8mm

SA-RW12 1/2”9-45 ft-lb12-60 Nm

55 ft-lb74 Nm

160 rpm3/8”

10mm2.6 lbs

1.18 kgs10.75”273mm

4 cfm113 l/min

21 cfm608 l/min

89/102.2 1/4”5/16”8mm

Min

imum

Ho

se S

ize

Air I

nlet

NPT

F

Soun

d dB

A(P

ress

ure/

Pow

er)

@ Lo

ad

Av. A

ir Co

nsum

ptio

n

Leng

th

Wei

ght

Std

Bolt

Cp.

Free

Spe

ed

Max

imum

To

rque

Wor

king

To

rque

Ran

ge

Squa

re D

rive

SizeRATCHET

WRENCHES

SA-500 1/2”25-300 ft-lb34-408 Nm

425 ft-lb575 Nm

500 ft-lb667 Nm

1,200 8,000 rpm9/16”14mm

5.8 lbs2.63 kgs

7.3”185mm

4.2 cfm119 l/min

22 cfm623 l/min

102/115 1/4”3/8”

10mm

SA-500E 1/2”25-300 ft-lb34-408 Nm

425 ft-lb575 Nm

500 ft-lb667 Nm

1,200 8,000 rpm9/16”14mm

5.8 lbs2.63 kgs

7.3”185mm

4.2 cfm119 l/min

22 cfm623 l/min

102/115 1/4”3/8”

10mm

SA-600 1/2”50-400 ft-lb68-544 Nm

450 ft-lb612 Nm

600 ft-lb816 Nm

1,250 9,500 rpm9/16”14mm

4.5 lbs2.04 kgs

7.1”180mm

4.8 cfm136 l/min

23 cfm651 l/min

89/102 1/4”3/8”

10mm

SA-1000 1/2”50-600 ft-lb68-814 Nm

625 ft-lb848 Nm

*700 ft-lb949 Nm

1,250 9,500 rpm9/16”14mm

4.0 lbs1.8 kgs

7.34”186.4mm

5.0 cfm142 l/min

24 cfm680 l/min - 1/4”

3/8”10mm

SA-1100 3/4”200-900 ft-lb271-1100 Nm

1100 ft-lb1491 Nm

NA 1,175 7,250 rpm1”


8.8”224mm

9.5 cfm269 l/min

38 cfm1076 l/min

101/114 3/8”1/2”

13mm

SA-175 3/8”15-160 ft-lb20-217 Nm

175 ft-lb232 Nm

NA 1,800 8,000 rpm7/16”11mm

2.89 lbs1.31 kgs

6.125”156mm

3 cfm85 l/min

13 cfm368 l/min

97.5/110.51/4”

3/8”10mm

SA-1200 3/8”200-900 ft-lb271-1100 Nm

1200 ft-lb1627 Nm

NA ?? 7,250 rpm ??7 lbs

3.2 kgs??

9.5 cfm269 l/min

?? cfm1133 l/min

?? 3/8”1/2”

13mm

* PEAK Torque - This will loosen a nut tightened to 1,000 ft.-lbs. in 6 seconds.

IMPACT TOOLS

Min

imum

Ho

se S

ize

Air I

nlet

NPT

F

Soun

d dB

A(P

ress

ure/

Pow

er)

@ Lo

ad

Av. A

ir Co

nsum

ptio

n

Leng

th

Wei

ght

Std

Bolt

Cp.

Free

Spe

ed

Blow

s Pe

r Min

ute

Max

imum

Torq

ue

Max

imum

Re

vers

eTo

rque

Wor

king

To

rque

Ran

ge

Squa

re D

rive

Size

SA-AH 12,000 rpm0.20 hp0.15 kW

6”152mm

1.92 lbs0.87 kgs

8 cfm226 l/min

15.5 cfm440 l/min

78/91 1/4”5/16”8mm

Soun

d dB

A(P

ress

ure/

Pow

er)

@ L

oad

Av. A

irCo

nsum

ptio

n

Leng

th

Wei

ght

Stro

ke Le

ngth

Shan

k Op

enin

g

Blow

s Per

M

inut

e@

90 P

SI

Bore

Dia

met

erHAMMER

SA-R38 2,400 rpm3/8”

10mm0.50 hp0.37 kW

2.7 lbs1.22 kgs

7.4”188mm

4 cfm113 l/min

23 cfm651 l/min

77.8/90.8 1/4”3/8”

10mm

SA-R12 1,200 rpm1/2”

13mm0.50 hp0.37 kW

3.2 lbs1.45 kgs

8”203mm

4 cfm113 l/min

22 cfm623 l/min

80.2/93.2 1/4”3/8”

10mm

Min

imum

Ho

se S

ize

Air I

nlet

NPT

F

Soun

d dB

A(P

ress

ure/

Pow

er)

@ Lo

ad

Av. A

ir Co

nsum

ptio

n

Leng

th

Wei

ght

Rate

d Po

wer

Chuc

k Si

ze

Free

Spe

ed

DRILLS

SA-R06 12,000 rpm0.20 hp0.15 kW

6”152mm

1.92 lbs0.87 kgs

8 cfm226 l/min

15.5 cfm440 l/min

78/91 1/4”5/16”8mm

Min

imum

Ho

se S

ize

Air I

nlet

NPT

F

Soun

d dB

A(P

ress

ure/

Pow

er)

@ W

Load

Av. A

ir Co

nsum

ptio

n

Wei

ght

Pad

Diam

eter

Rate

d Po

wer

Free

Spe

ed

SANDER

SA-DG 27,000 rpm0.33 hp0.25 kW

1.16 lbs0.53 kgs

5.63”143mm

3 cfm85 l/min

20 cfm566 l/min

95.1/108.1 1/4” 1/4”3/8”

10mm

SA-ADG 27,000 rpm0.33 hp0.25 kW

1.27 lbs0.76 kgs

6.75”168mm

3 cfm85 l/min

20 cfm566 l/min

95.1/108.1 1/4” 1/4”3/8”

10mm

Min

imum

Ho

se S

ize

Colle

t Siz

e

Air I

nlet

NPT

F

Soun

d dB

A(P

ress

ure/

Pow

er)

@ Lo

ad

Av. A

ir Co

nsum

ptio

n

Leng

th

Wei

ght

Rate

d Po

wer

Free

Spe

ed

DIEGRINGERS

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Air Tools


Impa

ct

SA-RW38S 3/8”5-25 ft-lb7-34 Nm

25 ft-lb34 Nm

270 rpm3/8”


7.5”190mm

4 cfm113 l/min

21 cfm608 l/min

89/102.21/4”

1/4”6mm

SA-RW38H 3/8”10-50 ft-lb14-68 Nm

60 ft-lb81 Nm

270 rpm3/8”

10mm2.53 lbs1.2 kgs

10.75”273mm

4 cfm113 l/min

16 cfm453 l/min

98/111 1/4”5/16”8mm

SA-RW38SHA 3/8” ??20 ft-lb27 Nm

200 rpm ??1.1 lbs0.5 kgs

6.5”165mm

2.5 cfm71 l/min

?? cfm425 l/min

?? 1/4”3/8”7mm

SA-RW38 3/8”9-45 ft-lb12-60 Nm

55 ft-lb74 Nm

160 rpm3/8”

10mm2.6 lbs

1.18 kgs10.75”273mm

4 cfm113 l/min

21 cfm608 l/min

89/102.2 1/4”5/16”8mm

SA-RW12 1/2”9-45 ft-lb12-60 Nm

55 ft-lb74 Nm

160 rpm3/8”

10mm2.6 lbs

1.18 kgs10.75”273mm

4 cfm113 l/min

21 cfm608 l/min

89/102.2 1/4”5/16”8mm

Min

imum

Ho

se S

ize

Air I

nlet

NPT

F

Soun

d dB

A(P

ress

ure/

Pow

er)

@ Lo

ad

Av. A

ir Co

nsum

ptio

n

Leng

th

Wei

ght

Std

Bolt

Cp.

Free

Spe

ed

Max

imum

To

rque

Wor

king

To

rque

Ran

ge

Squa

re D

rive

SizeRATCHET

WRENCHES

SA-500 1/2”25-300 ft-lb34-408 Nm

425 ft-lb575 Nm

500 ft-lb667 Nm

1,200 8,000 rpm9/16”14mm

5.8 lbs2.63 kgs

7.3”185mm

4.2 cfm119 l/min

22 cfm623 l/min

102/115 1/4”3/8”

10mm

SA-500E 1/2”25-300 ft-lb34-408 Nm

425 ft-lb575 Nm

500 ft-lb667 Nm

1,200 8,000 rpm9/16”14mm

5.8 lbs2.63 kgs

7.3”185mm

4.2 cfm119 l/min

22 cfm623 l/min

102/115 1/4”3/8”

10mm

SA-600 1/2”50-400 ft-lb68-544 Nm

450 ft-lb612 Nm

600 ft-lb816 Nm

1,250 9,500 rpm9/16”14mm

4.5 lbs2.04 kgs

7.1”180mm

4.8 cfm136 l/min

23 cfm651 l/min

89/102 1/4”3/8”

10mm

SA-1000 1/2”50-600 ft-lb68-814 Nm

625 ft-lb848 Nm

*700 ft-lb949 Nm

1,250 9,500 rpm9/16”14mm

4.0 lbs1.8 kgs

7.34”186.4mm

5.0 cfm142 l/min

24 cfm680 l/min - 1/4”

3/8”10mm

SA-1100 3/4”200-900 ft-lb271-1100 Nm

1100 ft-lb1491 Nm

NA 1,175 7,250 rpm1”


8.8”224mm

9.5 cfm269 l/min

38 cfm1076 l/min

101/114 3/8”1/2”

13mm

SA-175 3/8”15-160 ft-lb20-217 Nm

175 ft-lb232 Nm

NA 1,800 8,000 rpm7/16”11mm

2.89 lbs1.31 kgs

6.125”156mm

3 cfm85 l/min

13 cfm368 l/min

97.5/110.51/4”

3/8”10mm

SA-1200 3/8”200-900 ft-lb271-1100 Nm

1200 ft-lb1627 Nm

NA ?? 7,250 rpm ??7 lbs

3.2 kgs??

9.5 cfm269 l/min

?? cfm1133 l/min

?? 3/8”1/2”

13mm

* PEAK Torque - This will loosen a nut tightened to 1,000 ft.-lbs. in 6 seconds.

IMPACT TOOLS

Min

imum

Ho

se S

ize

Air I

nlet

NPT

F

Soun

d dB

A(P

ress

ure/

Pow

er)

@ Lo

ad

Av. A

ir Co

nsum

ptio

n

Leng

th

Wei

ght

Std

Bolt

Cp.

Free

Spe

ed

Blow

s Pe

r Min

ute

Max

imum

Torq

ue

Max

imum

Re

vers

eTo

rque

Wor

king

To

rque

Ran

ge

Squa

re D

rive

Size

SA-AH 12,000 rpm0.20 hp0.15 kW

6”152mm

1.92 lbs0.87 kgs

8 cfm226 l/min

15.5 cfm440 l/min

78/91 1/4”5/16”8mm

Soun

d dB

A(P

ress

ure/

Pow

er)

@ L

oad

Av. A

irCo

nsum

ptio

n

Leng

th

Wei

ght

Stro

ke Le

ngth

Shan

k Op

enin

g

Blow

s Per

M

inut

e@

90 P

SI

Bore

Dia

met

erHAMMER

SA-R38 2,400 rpm3/8”

10mm0.50 hp0.37 kW

2.7 lbs1.22 kgs

7.4”188mm

4 cfm113 l/min

23 cfm651 l/min

77.8/90.8 1/4”3/8”

10mm

SA-R12 1,200 rpm1/2”

13mm0.50 hp0.37 kW

3.2 lbs1.45 kgs

8”203mm

4 cfm113 l/min

22 cfm623 l/min

80.2/93.2 1/4”3/8”

10mm

Min

imum

Ho

se S

ize

Air I

nlet

NPT

F

Soun

d dB

A(P

ress

ure/

Pow

er)

@ Lo

ad

Av. A

ir Co

nsum

ptio

n

Leng

th

Wei

ght

Rate

d Po

wer

Chuc

k Si

ze

Free

Spe

ed

DRILLS

SA-R06 12,000 rpm0.20 hp0.15 kW

6”152mm

1.92 lbs0.87 kgs

8 cfm226 l/min

15.5 cfm440 l/min

78/91 1/4”5/16”8mm

Min

imum

Ho

se S

ize

Air I

nlet

NPT

F

Soun

d dB

A(P

ress

ure/

Pow

er)

@ W

Load

Av. A

ir Co

nsum

ptio

n

Wei

ght

Pad

Diam

eter

Rate

d Po

wer

Free

Spe

ed

SANDER

SA-DG 27,000 rpm0.33 hp0.25 kW

1.16 lbs0.53 kgs

5.63”143mm

3 cfm85 l/min

20 cfm566 l/min

95.1/108.1 1/4” 1/4”3/8”

10mm

SA-ADG 27,000 rpm0.33 hp0.25 kW

1.27 lbs0.76 kgs

6.75”168mm

3 cfm85 l/min

20 cfm566 l/min

95.1/108.1 1/4” 1/4”3/8”

10mm

Min

imum

Ho

se S

ize

Colle

t Siz

e

Air I

nlet

NPT

F

Soun

d dB

A(P

ress

ure/

Pow

er)

@ Lo

ad

Av. A

ir Co

nsum

ptio

n

Leng

th

Wei

ght

Rate

d Po

wer

Free

Spe

ed

DIEGRINGERS

Always Wear Eye Protection

Auto Service Tools

Page 151

DiagnosticRange of electronic test equipment designed to help diagnose problem on today’s hi-tech vehicles includes – Multimeters, Timing lights, Photo Tachometers, Infra Red Thermometers, Electronic Stethoscope.

Tune Up & ElectricalThis range includes Vacuum gauges, Test lights, Feeler Gauges, Spare Plug testers & Battery tools.

Fuel InjectionDedicated range of equipment for testing Electronic fuel injection systems found on all modern petrol engine vehicles, includes Pressure test kits, Fuel hose removal tools & Noid lites.

Cooling SystemTo meet the demands of our extreme climate conditions cooling systems need to be tested regularly , our unique range includes Universal Radiator pressure testers, Flush guns, Coolant testing, Temperature testers & Hose tools.

Engine ServiceRange of tools for engine maintenance & repairs includes tools for testing Oil pressure, Fluid transfer, Compression Testers, Oil filter tools, Hones, Valve train tools, Pullers, Pulley tools & cleaning.

BrakeThe braking system comprises a vital safety aspect of a motor vehicle, our range of tools are designed to diagnose problems & help repair & replace components - Brake Fluid testing, Disc Rotor testing, Brake pad replacement, Piston & Caliper repairs, Bleeding equipment, Flaring tools & clamps.

Drive Train & BodyTool range designed to help replace & repair underbody components including, Clutch tools, Gear/Bearing Pullers, Coil Spring compressors, Suspension tools, Body tools, Front axle & Wheel tools.

Safety• Wear eye protection

• Keep hands & clothing clear of moving components• Do not touch hot surfaces with exposed skin

•A void contact with chemicals or hot pressurised liquids

Featuring: Mechanical Tools for the Professional

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Dia

gnos

tic In

stru

men

ts

Auto Service Tools

PART No. 70819

Minimeter Digital Multimeter

• Pocket size digital multimeter ideal for home workshop or automotive usage• Functions include: AC/DC Voltage (V), Resistance (Ω), DC Current (A), Diode Test ( )

PART No. CM1200T

Digital Multimeter With Temperature• Compact size, economical price• Complete with rubber holster• Full function with temperature• Supplied with thermocouple• Great general purpose meter• Continuity Buzzer • Diode Test

SPECIFICATIONS Voltage: 600 Volts AC/DCCurrent: 10Amps DCResistance: 0.1 to 2000KΩTemperature: O to 40deg. C via built in sensor -40 to 1000 deg.C by “K” type thermocouple TP -O1A bead “K” type thermocouple supplied

PART No. 70940

Industrial 1000v Multimeter• Professional 1000V Industrial & Electrical Multimeter • True RMS voltage measurement• Large LCD backlight screen – 6000 display counts• Analogue Bar Graph Display• Double moulded plastic housing – compact design• IP67 rated: fully dustproof - waterproof to 1 M• Auto Ranging – Auto Power off• Min/Max recording, Relative Mode & Data Hold functions• Safety Conformance to EN 61010-1 2nd Edition - CE compliant • All Inputs are protected to CATIV 600V, CAT111 1000V standards• CAT111 meters are designed to protect against transients in fixed equipment installations• Functions include Voltage AC/DC, Current AC/DC, Resistance, Temperature, Duty Cycle, Frequency, Capacitance, Diode Check, Continuity• Packaged in vinyl carry case with double moulded safety test leads, 9V battery, K type temperature probe • Size: 182H x 82W x 55mmD – weight: 360g• 12 Month limited Warranty

Diagnostic Instruments

IP67 rated: fully dustproof - waterproof

to 1 Meter

Professional 1000V Industrial & Electrical Multimeter

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Dia

gnos

tic In

stru

men

ts

Auto Service Tools

PART No. 70819

Minimeter Digital Multimeter

• Pocket size digital multimeter ideal for home workshop or automotive usage• Functions include: AC/DC Voltage (V), Resistance (Ω), DC Current (A), Diode Test ( )

PART No. CM1200T

Digital Multimeter With Temperature• Compact size, economical price• Complete with rubber holster• Full function with temperature• Supplied with thermocouple• Great general purpose meter• Continuity Buzzer • Diode Test

SPECIFICATIONS Voltage: 600 Volts AC/DCCurrent: 10Amps DCResistance: 0.1 to 2000KΩTemperature: O to 40deg. C via built in sensor -40 to 1000 deg.C by “K” type thermocouple TP -O1A bead “K” type thermocouple supplied

PART No. 70940

Industrial 1000v Multimeter• Professional 1000V Industrial & Electrical Multimeter • True RMS voltage measurement• Large LCD backlight screen – 6000 display counts• Analogue Bar Graph Display• Double moulded plastic housing – compact design• IP67 rated: fully dustproof - waterproof to 1 M• Auto Ranging – Auto Power off• Min/Max recording, Relative Mode & Data Hold functions• Safety Conformance to EN 61010-1 2nd Edition - CE compliant • All Inputs are protected to CATIV 600V, CAT111 1000V standards• CAT111 meters are designed to protect against transients in fixed equipment installations• Functions include Voltage AC/DC, Current AC/DC, Resistance, Temperature, Duty Cycle, Frequency, Capacitance, Diode Check, Continuity• Packaged in vinyl carry case with double moulded safety test leads, 9V battery, K type temperature probe • Size: 182H x 82W x 55mmD – weight: 360g• 12 Month limited Warranty

Diagnostic Instruments

IP67 rated: fully dustproof - waterproof

to 1 Meter

Professional 1000V Industrial & Electrical Multimeter

Auto Service ToolsAuto Service Tools

Page 153

Auto Service Tools


Diagnostic Instrum

ents

PART No. 70917

Deluxe Automotive Multmeter• Oversized high contrast 4000 counts with bar graph back-light LCD Display• PRM measurement for automotive engines with 1 to 12 Cylinders using the inductive pick-up • 16 Functions include DCV, ACV, DCA, ACA, Resistance, RPM(Tach), Dwell, Angle, Duty Cycle, Frequency, Period, Pulse Width + - Trigger, Temperature (°Ê/ÜV) , • Capacitance, Continuity and Diode Check • Data Hold and Relative functions • MAX Hold and MIN Hold • Auto power off • Fused current inputs and overload protection on all ranges • Complete with rubber holster,+nylon storage case, test leads, type K

temperature Probe, pick-up and 9V battery • Dimensions/Wt: 197x88.4x41.2mm/390g

SPECIFICATIONS:Functions Range Basic Accuracy(%rdg+dgts)DC Voltage(V) 400m,4,40,400,1000 ±(0.5%+2d)AC Voltage(V) 400m,4,40,400,750 ±(0.8%+4d)DC Current(A) 400µ,4000µ,40m,400m,4,20 ±(1.2%+2d) AC Current(A) 400µ,4000µ,40m,400m,4,20 ±(1.5%+4d)Resistance(Ω) 400,4k,40k,400k,4M,40M ±(0.8%+3d)RPM(Tach) 600°´4000RPM ±(2.5%+2d) 600°´12000RPM(x10RPM) ±(2.5%+2d)Dwell Angle 1CYL - 12CYL ±(2.5%+2d)Duty Cycle 0.1 ~ 99.9% ±(1.5%+2d) Period 0.1 ~ 20mS ±(3.0%+5d)Pulse Width 0.1 ~ 10mS ±(3.0%+5d)Frequency 0.001Hz ~ 9.99MHz ±(2.0%+2d)

PART No. 70919

AC/DC Current Clamp• Used to measure AC/DC current• 0 to 40 - 400 Amp range• Non invasive inductive clamp adaptor• Converts current to voltage output• Use with any 320mV input multimeter• Connects to meter via standard banana inputs• CE approval: EN61010-1 - CATII 600V• Supplied with leads & carry case• Takes 9V battery

PART No. 70934

Digital Photo Tachometer• LED Beam allows safe and accurate non-contact RPM measurement of

any revolving component. • Unlimited uses in many industries including: Automotive, Heavy Vehicles,

Plant & Equipment, Industrial, Maintenance & Electrical• 50mm to 500mm Detection range using reflective tape. • 5 digit LCD display (2.5 - 99999RPM) with high resolution

(0.1RPM<1000RPM +1RPM>1000RPM)• Automatic Data Hold Function displays both minimum, maximum and last displayed test values along with memory store capability.• Low battery indication warning

Spare Part: 70934-5 Reflective tape (3 pack)

PART No. 70617

Automotive Multimeter• 10Meg OHM impedance - computer safe• MS Pulse width to test injectors, IAC motors & controls • Auto/Manual ranging + Bargraph display• DIS (Distributorless Dual Ignition System) RPM function• Inductive RPM clamp• Functions - Volts AC/DC, OHMS, Capacitance, Current AC/DC, 20 Amp fused circuit, Diode check, Audible continuity,• RPM, Duty cycle, Pulse Width, Dwell, Frequency, Temperature.• Meets CATIII1000V/CATIV600V specifications• Oversize LCD display 4000 counts with backlight• Polarity: Automatic, (-) negative polarity indication.• Low battery indication - Auto Power off• Data hold & Peak Hold functions • IP67 Dust proof & waterproof to 1 Meter• Test leads, Temperature probe, Inductive clamp and 9V battery supplied.• Double moulded case, built in stand and test lead holders• Comprehensive Instruction Manual included

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Dia

gnos

tic In

stru

men

ts

Auto Service Tools

PART No. 70918

Pocket Infrared Thermometer with Laser Pointer• 6:1 Distance to Spot size ratio• Large LCD screen shows readings in Fahrenheit or Celcius• Easy to use• Range: -30 to 270ºC -22 to 518ºF• User selectable ºC or ºF• Laser targeting• Automatic Data Hold• Auto Power Off• Backlit LCD Display• Low Battery indication• Takes 2 x AAA 1.5V batteries• HUNDREDS of uses: Home, workshop, food industry, refrigeration, air

conditioning, health & safety, electrical, engineering, automotive etc.

SPECIFICATIONS Range: -30ºC~270ºC/-22ºF~518ºFResponse Time: Less than 1 secondResolution: 1ºC/ºFBasic Accuracy: 2% or 2ºC/ 4ºFDistance to Spot size ratio: 6:1Emissivity: Fixed at 0.95

* Warning wear safety glasses - Keep hands & clothing away from moving components

PART No. 70618

Non-Contact Infrared Thermometer• Quickly and easily obtains surface temperatures of any object.• Simply point, Pull trigger & Read the Display.• Temperature Range -50ºC to 500ºC (-58ºF to 932ºF)• In-built laser sighting for aim • One handed, non-contact operation• ºC/ºF switch function• Back-lit LCD display • Automatic Data Hold & Auto Power Off • Simple and Safe to use

Hundred of uses in many industries including:AUTOMOTIVE INDUSTRIAL AIR-CONDITIONINGMAINTENANCE ELECTRICAL REFRIGERATION HEALTH & SAFETY PRINTING FOOD STORAGE

PART No. 70886

Self Powered Timing/Work Light• Combines both Timing Light and Work Light into one useful tune-up tool• For use on conventional, electronic or magneto type• ignitions on 12V petrol engines• Self powered by 2 x D cell batteries (not included)

Spare Part: 70886-5 Xenon Flash Tube

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Dia

gnos

tic In

stru

men

ts

Auto Service Tools

PART No. 70918





PART No. 70618


Hundred of uses in many industries including:AUTOMOTIVE INDUSTRIAL AIR-CONDITIONINGMAINTENANCE ELECTRICAL REFRIGERATION HEALTH & SAFETY PRINTING FOOD STORAGE

PART No. 70886

Self Powered Timing/Work Light• Combines both Timing Light and Work Light into one useful tune-up tool• For use on conventional, electronic or magneto type• ignitions on 12V petrol engines• Self powered by 2 x D cell batteries (not included)

Spare Part: 70886-5 Xenon Flash Tube


Page 155

Auto Service Tools


Diagnostic Instrum

entsInductive Pickup

PART No. 70887

Advance Timing Light• For use on conventional, electronic and high energy ignition systems on 12V petrol engines• Testing range 0 - 10,000 rpm• Dial type timing advance (0 - 60º scale)

Spare Parts:70887-5 Xenon Bulb70887-6 Inductive Pickup & Battery Leads Set

Detachable Lead

One Hand Operation

Flexibe head & slimline design for aiming in

confined areas

Protective Hand Guard

PART No. 81500

Lambda Sensor Tester• Automatic sensor recognition - Zirconia or Titania• Tests and simulates lambda sensor in any current vehicle• Rich or lean condition can be simulated - checks wiring and correct computer response• Portable - powered by internal battery• Unique signal clip - easy connection to harness. No need to break into wiring• Intelligent panel informs you which wire you’re connected to

PART No. 81100

Brake Fluid Safety Meter• Checks the condition of brake fluid accurately in under 1 minute• Increase brake servicing revenue• Award winning ergonomic design• Operates off 12 volt supply - cars own battery• Supplied to the world’s leading brake and brake fluid manufacturers• User friendly• Now available up to 3200c (6080f) - suitable for use on new brake fluid and racing fluids• Will not operate if connected to the wrong polarity • LCD display screen instructions lead operator through the complete testing sequence

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Dia

gnos

tic In

stru

men

ts

PART No. 70737

Empty Blow Moulded Case• Ideal for safely storing test equipment ie: compression testers, fuel

injection equipment• Case size 12”(305mm) x 8”(203mm) x 3-1/2”(89mm)

PART No. 70617-10

Electronic Equipment Soft Case• Safely stores electronic equipment (multimeters, infrared thermometers

etc.) to prevent accidental damage• Heavy duty Denier nylon construction• Convenient storage compartments for sundry items (leads, inductive

pickups,instruction manuals etc.)

PART No. 74118

Combination Electronic Stethoscope KitElectronic Engine Stethoscope • Dramatically outperforms and replaces the ordinary

mechanic’s stethoscope• Used to detect bad bearings, bushings, noisy lifters,

exhaust manifold leaks, broken or chipped gear teeth• Used to pinpoint the location of wind and water leaks

around doors, windows and sunroofs• Simply turn on the unit, place the sensing tip on the

suspect part, put on the headphones, adjust the volume control and listen

Component Stethescope • Pinpoints the location of problem sounds• Enables the technician to quickly detect locations of

under-chassis, under- hood and under-dash noises• Up to four locations can be diagnosed in one simple

road test• Allows the technician to test drive a vehicle and

listen to each of the sensor clamps individually

Supplied in Blow Mould Case

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Dia

gnos

tic In

stru

men

ts

PART No. 70737

Empty Blow Moulded Case• Ideal for safely storing test equipment ie: compression testers, fuel

injection equipment• Case size 12”(305mm) x 8”(203mm) x 3-1/2”(89mm)

PART No. 70617-10

Electronic Equipment Soft Case• Safely stores electronic equipment (multimeters, infrared thermometers

etc.) to prevent accidental damage• Heavy duty Denier nylon construction• Convenient storage compartments for sundry items (leads, inductive

pickups,instruction manuals etc.)

PART No. 74118

Combination Electronic Stethoscope KitElectronic Engine Stethoscope • Dramatically outperforms and replaces the ordinary

mechanic’s stethoscope• Used to detect bad bearings, bushings, noisy lifters,

exhaust manifold leaks, broken or chipped gear teeth• Used to pinpoint the location of wind and water leaks

around doors, windows and sunroofs• Simply turn on the unit, place the sensing tip on the

suspect part, put on the headphones, adjust the volume control and listen

Component Stethescope • Pinpoints the location of problem sounds• Enables the technician to quickly detect locations of

under-chassis, under- hood and under-dash noises• Up to four locations can be diagnosed in one simple

road test• Allows the technician to test drive a vehicle and

listen to each of the sensor clamps individually

Supplied in Blow Mould Case

Auto Service Tools

Page 157

Auto Service Tools


Tune Up &

Electrical

PATENTEDPATENT INSURED

Under Dash Engine Bay Brake Bleeding

PART No. 80000

Testvac - Automotive Vacuum Test KitThe complete kit for all vacuum testing and brake bleeding requirements.Hand held vacuum pump - compact design, one handed operation.Allows fast efficient static testing and monitoring of many vacuumoperated components:1. Diagnostic - vacuum leaks, valve timing, engine condition.2. Engine Bay - distributors, carburettors, EFI, EGR & PCV valves.3. Under Dash - heaters, air conditioners, door locks.• Allows one man brake bleeding.• Safely transfers fluids.• Ergonomic handle design.• Regulated vacuum relief valve

Contents: Vacuum PumpFluid ContainerTransfer Cap2 Lengths Vacuum Hose12 Assorted Vacuum Hose Fittings3 Brake Bleeder FittingsInstruction ManualBlow Moulded Case

SpecificationsGauge - 0-30” in HgVacuum - up to 27” in HgContainer Capacity - 120ml (4oz)

PART No. 70814

Vacuum / Fuel Pump Test Kit• Checks manifold vacuum and standard fuel pump pressure• Includes Brass and Rubber Adaptors• Includes Gauge Protector• Supplied in Blow Moulded Case• Range: 0-30 in Hg / 0-15 psi

Tune Up & Electrical

PART No. 70374

Vacuum / Pressure Gauge• Long reach flexible hose• Brass and rubber cone adaptors• Checks manifold vacuum or fuel pump pressure• Range: 0-25 inHg / 0-14 psi

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Tune

Up

& E

lect

rical

PART No. 70436

Oxygen Sensor / Vacuum Switch Socket• “Cutaway” design prevents connector wire damage• Suits: 7/8” (22mm) hex sensors• 3/8” Square Drive

BLACKGRIPJAW

SILVERPUSHJAW

RUBBER HOSESTEELTUBE


BLACK JAWGRIPSTUBE

SILVER JAW

PUSHES

PART No. 70843

Fuel Hose Removal Pliers• For removal of vacuum and fuel lines from 5/32” to 1/2” (4-13mm)• Specially designed pliers allow the sharp edged (black) jaw to grasp the

steel tube allowing the chrome jaw to simply push the hose off for easy removal

PART No. 70035

Small Line Clamp• Seals flexible brake and fuel lines• Smooth rounded edges to ensure no damage to the internal reinforcement

of hydraulic brake lines• Bright high-visibility colour• Quick and easy to use• Size Range 1/8” (3mm) – 5/16” (8mm)

PART No. 70813

Super Heavy Duty Circuit Tester• Suitable for 6, 12 and 24 Volt Systems• 1500mm (5 foot) Rubber Cable with Spring Relief• Uses Automotive Parklamp Globe

PART No. 70079

Circuit Tester• Indicates power present in 6 – 12v DC electrical systems

PART No. 70086

Heavy Duty Circuit Tester• For trucks and equipment with 18, 24 or 36v DC systems

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Tune

Up

& E

lect

rical

PART No. 70436

Oxygen Sensor / Vacuum Switch Socket• “Cutaway” design prevents connector wire damage• Suits: 7/8” (22mm) hex sensors• 3/8” Square Drive

BLACKGRIPJAW

SILVERPUSHJAW



BLACK JAWGRIPSTUBE

SILVER JAW

PUSHES

PART No. 70843



PART No. 70035



PART No. 70813

Super Heavy Duty Circuit Tester• Suitable for 6, 12 and 24 Volt Systems• 1500mm (5 foot) Rubber Cable with Spring Relief• Uses Automotive Parklamp Globe

PART No. 70079

Circuit Tester• Indicates power present in 6 – 12v DC electrical systems

PART No. 70086

Heavy Duty Circuit Tester• For trucks and equipment with 18, 24 or 36v DC systems

Page 159

Auto Service Tools


Tune Up &

Electrical

PART No. 70085

Deluxe Circuit Tester• Polarity indicating tester• LED glows red (+) and green (-)• Safe for use on all computerised vehicle systems• Insulated probe

PART No. 70081

Two-in-one Circuit Tester• Indicates power present in 6 – 12v DC electrical systems• Also checks spark plugs and spark plug wiring

PART No. 70083

Continuity Tester• Use with a single “AA” size battery to check all circuits and wiring with

power disconnected

PART No. 70975

LED Test Light - Extra Long• LED test light with extra long shaft - 180m for areas of restricted access• Computer safe circuitry with 10 Meg Ohm impedance• Green and red LED’s for determining system polarity• Suitable for 6, 12, 24 Volt electrical systems• 1.8m long cord with + & – attaching clips

PART No. 70119

Master Mechanics Feeler Gauge• 37 Precision blades from 0.0015” (.038mm) to 0.035” (.889mm)• Includes 6 brass blades• Double-etched with inches & mm sizes

PART No. 70681

Deluxe Feeler Gauge Set• 32 Precision blades from 0.0015” (.038mm) to 0.035” (.889mm)• Includes .010” brass blade• Double-etched with inches & mm sizes

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Tune

Up

& E

lect

rical

PART No. 70109

Mechanics Feeler Gauge• 15 Precision blades from 0.002” (.051mm) to 0.025” (.635mm)• Double-etched with inch & mm sizes

PART No. 70115

Metric Feeler Gauge• 25 Precision blades from 0.04 to 1.00mm

PART No. 70113

Go / No-Go Feeler Gauge• 22 Stepped blades from 0.004” (.100mm) to 0.027” (.685mm)• Each blade quickly checks with a 0.002” range

PART No. 70111

Mini Feeler Gauge• 17 small blades from 0.010” (0.254mm) to 0.035” (0.889mm)• Double-etched with inch & mm sizes• Ideal for contact points

PART No. 70107

Offset Feeler Gauge• 12 Offset blades from 0.008” (.203mm) to 0.026” (.660mm)• Double-etched with inch & mm sizes

PART No. 70117

Double Sided Offset Feeler Gauge• 26 Offset blades from 0.005” (.127mm) to 0.030” (.762mm)• Double-etched with inch & mm size

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Tune

Up

& E

lect

rical

PART No. 70109

Mechanics Feeler Gauge• 15 Precision blades from 0.002” (.051mm) to 0.025” (.635mm)• Double-etched with inch & mm sizes

PART No. 70115

Metric Feeler Gauge• 25 Precision blades from 0.04 to 1.00mm

PART No. 70113

Go / No-Go Feeler Gauge• 22 Stepped blades from 0.004” (.100mm) to 0.027” (.685mm)• Each blade quickly checks with a 0.002” range

PART No. 70111

Mini Feeler Gauge• 17 small blades from 0.010” (0.254mm) to 0.035” (0.889mm)• Double-etched with inch & mm sizes• Ideal for contact points

PART No. 70107

Offset Feeler Gauge• 12 Offset blades from 0.008” (.203mm) to 0.026” (.660mm)• Double-etched with inch & mm sizes

PART No. 70117

Double Sided Offset Feeler Gauge• 26 Offset blades from 0.005” (.127mm) to 0.030” (.762mm)• Double-etched with inch & mm size

Page 161

Auto Service Tools


Tune Up &

Electrical

PART No. 70536

Adjustable Ignition Spark Tester• Works on any system, including HEI

PART No. 70453

Ramp-Style Spark Plug Gauge• Use on electronic or conventional ignitions• Suits any size from 0.020” (0.5mm) to 0.100” (2.5mm)• Dual-stamped with inch & mm

PART No. 70668

Insulated Spark Plug Boot Pliers• Strong plastic construction• Unique gripping jaw design assists with removal of tight leads

PART No. 70483

Offset Spark Plug Boot Pliers• Avoids internal damage when removing leads• 45° offset jaws for improved access in tight situations• Not recommended for use when engine is running

PART No. 70839

Insulated Terminal Crimping & Wire Stripping Tool• For crimping insulated terminals• Other functions include small bolt cutting to 4mm, Wire cutting and wire

stripping with 7mm and 8mm ignition crimping capabilities

PART No. 70414

High Energy Ignition Tester• Accurately checks ignition system output – no need to remove spark plug.

Just attach lead and ground clip to check for spark.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Bat

tery

Ser

vice

Too

ls

Auto Service Tools

Battery Service Tools

PART No. 70492

Battery Terminal Spreader• Spreads and cleans cable terminals in one easy operation

PART No. 70426

Battery Brush• Removes corrosion and dirt from both terminal posts and cable clamps• Ideal companion for every glovebox

PART No. 70838

Battery Hydrometer• Tests specific gravity of battery fluid.

PART No. 70470

Battery Holder• Unique self locking design ensures a positive grip on top and side terminal

batteries• Ideal for lifting and carrying batteries

PART No. 70090

Dashboard Memory Back Up• Retains settings of trip computers, digital clocks, radios and telephones

etc. while the battery is disconnected• Plugs into the cigarette lighter socket• Instructions included

PART No. 70846

Radio Removal Tools• For easy removal of most Phillips and Eurovox radio’s found in Ford, GM &

imported vehicles• Quickly releases retaining clips without damage • Tool also serves as handles for removing radio from the surround panel

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Bat

tery

Ser

vice

Too

ls

Auto Service Tools

Battery Service Tools

PART No. 70492

Battery Terminal Spreader• Spreads and cleans cable terminals in one easy operation

PART No. 70426

Battery Brush• Removes corrosion and dirt from both terminal posts and cable clamps• Ideal companion for every glovebox

PART No. 70838

Battery Hydrometer• Tests specific gravity of battery fluid.

PART No. 70470

Battery Holder• Unique self locking design ensures a positive grip on top and side terminal

batteries• Ideal for lifting and carrying batteries

PART No. 70090

Dashboard Memory Back Up• Retains settings of trip computers, digital clocks, radios and telephones

etc. while the battery is disconnected• Plugs into the cigarette lighter socket• Instructions included

PART No. 70846

Radio Removal Tools• For easy removal of most Phillips and Eurovox radio’s found in Ford, GM &

imported vehicles• Quickly releases retaining clips without damage • Tool also serves as handles for removing radio from the surround panel


Page 163

Auto Service Tools


Fuel Injection

Fuel Injection

PART No. 70445

Master Fuel Injection Test Kit• Suits the workshop that handles a wide variety of vehicles – handles popular Multipoint or Throttle-body as well as CIS systems as found on many European vehicles• Includes a blow-down hose assembly for safe release of pressure when disconnecting from the system, and performing a basic flow test• All connections are “quick-coupler” fittings• Including fuel rail adaptor fittings• Supplied in a sturdy blow moulded case with carry handle and lift out tray

PART No. 70549

Combination Fuel Injection Test Kit• Suits Multipoint systems with either “push-on” or “banjo” style hoses found on most Ford, GM, Mazda, Nissan, Suzuki, Toyota, Honda, Mitsubishi, Daihatsu

vehicles• All connections are “quick-coupler” fittings• Includes 70726 Fuel Rail Adaptor and disconnect tool

PART No. 70440

Fuel Injection Test Kit• Suits Multipoint systems with “push-on” hoses• All connections are “quick-coupler” fittings

PART No. 70442

Fuel Bolt Adaptor Kit• 5 adaptors for accessing systems with Banjo hose fittings, giving a

connection point for all ABW testers – suits most Toyota, Honda, Mitsubishi, Suzuki, Daihatsu etc.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Fuel

Inje

ctio

n

Auto Service Tools

PART No. 70864

Ford Fuel Pump Tool• Removes & installs fuel pump retaining nut• Allows access to fuel pump and sender unit• Suits all EFI Ford Falcon models “XE onwards” with plastic retaining nuts

PART No. 70795

Large Schrader Hose Fitting• Suits large EFI Schrader Valve fittings found on GMH, Opel and Isuzu

vehicles

Fuel Rail AdaptorsPART No. 70726

• To suit most GM and Ford vehicles with hairpin couplings • GM/Ford PF

PART No. 70862

• To suit most GM and Ford V8 vehicles with 3/8” hairpin or spring lock couplings

PART No. 70443

C.I.S. Fuel Injection Kit• Suits Bosch K-Jetronic (CIS) mechanical fuel injection systems commonly

found on many European vehicles – use with any of the ABW Fuel• Injection kits to service Audi, BMW, Fiat, Mercedes Benz, Peugeot, Saab,

VW, Volvo etc.• All connections are “quick-coupler” fittings

PART No. 70993

Fuel & Transmission Line Disconnect Tool• 8 piece kit, suits a variety of fittings• Separates spring lock hose couplings• Suitable for separating fittings on: EFI fuel hoses, • Transmission oil cooler lines, power steering & A/C fittings• Sizes: 6, 8, 10, 12mm (1/4, 5/16, 3/8, 1/2”)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Fuel

Inje

ctio

n

Auto Service Tools

PART No. 70864

Ford Fuel Pump Tool• Removes & installs fuel pump retaining nut• Allows access to fuel pump and sender unit• Suits all EFI Ford Falcon models “XE onwards” with plastic retaining nuts

PART No. 70795

Large Schrader Hose Fitting• Suits large EFI Schrader Valve fittings found on GMH, Opel and Isuzu

vehicles

Fuel Rail AdaptorsPART No. 70726

• To suit most GM and Ford vehicles with hairpin couplings • GM/Ford PF

PART No. 70862

• To suit most GM and Ford V8 vehicles with 3/8” hairpin or spring lock couplings

PART No. 70443

C.I.S. Fuel Injection Kit• Suits Bosch K-Jetronic (CIS) mechanical fuel injection systems commonly

found on many European vehicles – use with any of the ABW Fuel• Injection kits to service Audi, BMW, Fiat, Mercedes Benz, Peugeot, Saab,

VW, Volvo etc.• All connections are “quick-coupler” fittings

PART No. 70993

Fuel & Transmission Line Disconnect Tool• 8 piece kit, suits a variety of fittings• Separates spring lock hose couplings• Suitable for separating fittings on: EFI fuel hoses, • Transmission oil cooler lines, power steering & A/C fittings• Sizes: 6, 8, 10, 12mm (1/4, 5/16, 3/8, 1/2”)


Page 165

Auto Service Tools


Fuel Injection

BLACKGRIPJAW

SILVERPUSHJAW



BLACK JAWGRIPSTUBE

SILVER JAWPUSHES

PART No. 70827

Fuel & A/C Disconnect Tool Set• 4 Piece kit suits most spring-lock couplers on fuel injection and

airconditioning lines• Suits fuel & A/C lines 5/16’ (8mm), 1/2” (13mm), 5/8” (16mm), 3/4”

(19mm) used on Ford, GM & other vehicles

PART No. 70843



PART No. 70898

Noid Light Set• 10 Piece Deluxe Noid Lite Set• Enables fast Diagnosis of EFI systems & IAC operation• Checks for signal outputs from the computer system by plugging into wiring harness • Tests most injectors inc: BOSCH PFI, BOSCH 2, FORD TBI, GEO TBI, GM PFI, GM TBI, GM SCPI, GM MULTITECH, IAC 4 pin round & IAC 4 pin flat signal test lights• Packaged in blow moulded case & colour sleeve

PART No. 70736

Fuel Line Disconnect Tool• Scissor-like design allows for easy, damage free fuel line, quick connect

coupler release• Fits 5/16” or 3/8” fuel lines found on most GM, Ford and Chrysler vehicles

PART No. 71405

Combination Noid Lite Set • Quickly checks power in Fuel Injector electrical wiring – plugs into

harness• Pack of 2 Noid Lites designed for use on:

Multipoint Fuel Injection (PFI)

Throttlebody Fuel Injection (TBI)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Cool

ing

Syst

em

Auto Service Tools

PART No. 70800

Cooling System Pressure TesterTHE UNIVERSAL COOLING SYSTEM PRESSURE TESTER THAT ELIMINATES THE NEEDFOR MOST ADAPTORSThe inflatable bladder sealing system enables the analyser to attach to almost all passenger andlight commercial vehicles.Fits bayonet and threaded filler necks on radiators and header tanks.

Locate leaks from:• Head gaskets • Radiator and heater cores• Welch plugs and housings • Water pumps and hoses

Features: • Universal fitment• Fast, efficient system testing

Other features include:• Suitable for marine applications.• Fluid drain tube allows coolant to be returned to the coolant reservoir or safely collected in a container for recycling.

PART No. 70938

Truck Radiator Pressure Test KitDESIGNED TO SUIT MOST TRUCKS, HEAVY MACHINERY AND PLANT EQUIPMENT

• Supplied with 4 expanding tapered adaptors to suit most large radiators• Pump is constructed from high impact, corrosion resistant material• Colour coded gauge & blow moulded storage case

Adaptor A suits 17-35mm openingsAdpator B suits 27-41mm openingsAdaptor C suits 37-50mm openingsAdaptor D suits 47-60mm opening


PART No. 70768 – VW header tanks

PART No. 70769 – Japanese micro vehicles

PART No. 70770 – Audi-VW Header Tanks

BLADDERSYSTEM

HEADER TANK

BLADDERSYSTEM

RADIATOR TANK

Cooling System

Radiator Neck Extensions• Allows 70800 retaining clips to be engaged • Made from industrial strength nylon

System Testing

Contents include:• Analyser• Pressure pump with 0-30 psi (0-207 kPa) gauge• Air supply hose• Drain hose• Spare bladder• Instruction manual• 70768 Neck Extension• 70769 Neck Extension• 70770 Neck Extension (Optional)• Blow-moulded storage case

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Cool

ing

Syst

em

Auto Service Tools

PART No. 70800

Cooling System Pressure TesterTHE UNIVERSAL COOLING SYSTEM PRESSURE TESTER THAT ELIMINATES THE NEEDFOR MOST ADAPTORSThe inflatable bladder sealing system enables the analyser to attach to almost all passenger andlight commercial vehicles.Fits bayonet and threaded filler necks on radiators and header tanks.


Features: • Universal fitment• Fast, efficient system testing


PART No. 70938

Truck Radiator Pressure Test KitDESIGNED TO SUIT MOST TRUCKS, HEAVY MACHINERY AND PLANT EQUIPMENT

• Supplied with 4 expanding tapered adaptors to suit most large radiators• Pump is constructed from high impact, corrosion resistant material• Colour coded gauge & blow moulded storage case

Adaptor A suits 17-35mm openingsAdpator B suits 27-41mm openingsAdaptor C suits 37-50mm openingsAdaptor D suits 47-60mm opening





BLADDERSYSTEM

HEADER TANK

BLADDERSYSTEM

RADIATOR TANK

Cooling System


System Testing

Contents include:• Analyser• Pressure pump with 0-30 psi (0-207 kPa) gauge• Air supply hose• Drain hose• Spare bladder• Instruction manual• 70768 Neck Extension• 70769 Neck Extension• 70770 Neck Extension (Optional)• Blow-moulded storage case


Page 167

Auto Service Tools


Cooling System

PART No. 70888

Deluxe Cooling System Pressure TesterTHE UNIVERSAL COOLING SYSTEM PRESSURE TESTERTHAT ELIMINATES THE NEED FOR ALMOST ALL SYSTEM ADAPTORSCOMPLETE WITH 4 UNIQUE DOUBLE ENDED CAP ADAPTORSALLOWING 8 DIFFERENT CAPS TO BE TESTED

The inflatable bladder sealing system enables the analyser to attachto almost all passenger and light commercial vehicles.Fits bayonet and threaded filler necks on radiators and header tanks.


Features: • Universal fitment• Fast, efficient system testing• Test cap relief pressure & seal condition


Contents include:• Analyser • Cap Adaptor A• Pressure pump with • Cap Adaptor B 0-30 psi (0-207 kPa) gauge • Cap Adaptor C• Air supply hose • Cap Adaptor D• Drain hose • Cap Adaptor E• Spare bladder • Cap Adaptor F• Instruction manual • Blow-moulded storage case• 70768 Neck Extension• 70769 Neck Extension• 70770 Neck Extension

Technical Specifications• Bladder is cycle tested to over 1500 inflations • Suits neck diameter of up to 45mm (Thread or Bayonet)• Tester constructed from high strength fibre reinforced synthetic polymer.• Max pump pressure: 30psi




A B C D

• Small Japanese Shallow Fittings• Late Model VW/Audi

• Jeep, Saab• VW/Audi

• Small Japanese Deep fittings• VW/Audi

• Ford Header Tank• GM N Body

• Internal Thread• External Thread • Internal Thread• Standard Bayonet

BLADDERSYSTEM

HEADER TANK

BLADDERSYSTEM

RADIATOR TANK

Header TanksRadiators

E F

• Late Model Mercedes Benz

• BMW up to 1987• Land Rover• Range Rover• Late Model BMW

• External Thread• External Thread



Cap Adaptors

System Testing

Bayonet TypeRadiator Cap

Threader TypeHeader Tank

Cap

Cap Testing

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Cool

ing

Syst

em

Auto Service Tools

PATENT PENDINGPATENT INSURED

SIGHTING

LASER

PART No. 70618


Hundred of uses in many industries including:AUTOMOTIVE INDUSTRIAL AIR-CONDITIONINGMAINTENANCE ELECTRICAL FOOD HEALTH & SAFETY PRINTING

PART No. 70880

Quickfill - Cooling System Refilling GunCooling System Serviced In Minutes

• Eliminates airlocks during refilling utilising deep vacuum technology• Eliminates the need for system bleeding• Dramatically reduces filling time• Automatically tests for system leaks• Eliminates coolant spillage and wastage• Universal fitment to most radiator and header tanks• Fast and easy to use• Unique multi-fit cone eliminates the need for additional adaptors• Integrated filling tap and vacuum check valve removes the need for

interchanging hoses• Quick release air supply locking trigger• Integrated vacuum gauge• Operates on shop air to generate deep system vacuumNOTE: Does not drain coolant from system

QuickFill 3-Step operation1. Drain old coolant, couple to system and connect shop air.2. Operate trigger to create a deep vacuum and release trigger to test for leaks.3. Turn system tap to ‘FILL’ position to refill with new coolant.

SpecificationsAir Pressure - Min: 550kpa (80psi). Max: 900kpa (130psi)Air Consumption - Max 180 ltr/min (10CFM) at 100psi.Vacuum - 25” in Hg (-0.85bar) at 100psi.Gauge - 0-30” in Hg (0 to -1.0bar)Thread connection - 1/4” BSP.Filling Hose Length - 1500mm

200

1600800

400

16

Ø25 Ø50Ø100

Ø200InfraRed Laser

Emissivity:�∑=0.95 Unit:�mm

PART No. 70918





Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Cool

ing

Syst

em

Auto Service Tools


SIGHTING

LASER

PART No. 70618


Hundred of uses in many industries including:AUTOMOTIVE INDUSTRIAL AIR-CONDITIONINGMAINTENANCE ELECTRICAL FOOD HEALTH & SAFETY PRINTING

PART No. 70880

Quickfill - Cooling System Refilling GunCooling System Serviced In Minutes

• Eliminates airlocks during refilling utilising deep vacuum technology• Eliminates the need for system bleeding• Dramatically reduces filling time• Automatically tests for system leaks• Eliminates coolant spillage and wastage• Universal fitment to most radiator and header tanks• Fast and easy to use• Unique multi-fit cone eliminates the need for additional adaptors• Integrated filling tap and vacuum check valve removes the need for

interchanging hoses• Quick release air supply locking trigger• Integrated vacuum gauge• Operates on shop air to generate deep system vacuumNOTE: Does not drain coolant from system

QuickFill 3-Step operation1. Drain old coolant, couple to system and connect shop air.2. Operate trigger to create a deep vacuum and release trigger to test for leaks.3. Turn system tap to ‘FILL’ position to refill with new coolant.

SpecificationsAir Pressure - Min: 550kpa (80psi). Max: 900kpa (130psi)Air Consumption - Max 180 ltr/min (10CFM) at 100psi.Vacuum - 25” in Hg (-0.85bar) at 100psi.Gauge - 0-30” in Hg (0 to -1.0bar)Thread connection - 1/4” BSP.Filling Hose Length - 1500mm

200

1600800

400

16

Ø25 Ø50Ø100

Ø200InfraRed Laser

Emissivity:�∑=0.95 Unit:�mm

PART No. 70918






Page 169

Auto Service Tools


Cooling System

PART No. 70491

Radiator Temperature Gauge• Dual-scale 120 to 270° F (49 to 132° C)

PART No. 70980

Refractometer - Engine Coolant & Battery Fluid Tester• The fastest, easiest most accurate testing method available• Test coolant freezing point & glycol concentration• Suitable for ethylene & propylene glycol coolants• Test specific gravity of battery fluid• Automatic temperature compensation• Easy to read scale• Protective carry case

SPECIFICATIONS:• Ethylene & propylene glycol: -50 - 0ºC antifreeze protection• Coolant concentration level: 0 - 60%• Battery fluid: 1.15 -1.30 specific gravity • Automatic temperature compensation range: 10 - 30ºC

Over 25% of all vehicle repair costs are directly attributed tocooling system maintenance issues.• Correct coolant/water concentration levels ensure the following

requirements are met: - coolant viscosity levels - heat transfer capability - anti freeze protection - boil over protection

• Incorrect coolant levels may result in: - engine damage due to cavitation corrosion - overheating - hose, gasket & water pump seal seepage - water pump failure - gelation & scale formation - solder bloom - freezing & cracking of hoses, radiators & engine blocks

PART No. 70570

Universal Dial Thermometer• Stainless steel design and low range ideal for airconditioning testing• Dual scale - 40 to 70° C - 40 to 158° F• Large easy-to-read 45mm dial• Includes protective cover with pocket clip

PART No. 70586

Combustion Leak Test Kit• Checks radiator to see if combustion gas is present – test fluid changes

colour if leak is detected• Quickly identifies cracked or warped blocks and heads, or leaky gaskets• Can be used on any internal combustion engine, petrol, diesel, LPG or

alcohol powered

Replacement test fluid available:PART No. 70587


PART No. 70801

Cooling System Flush GunMULTIPURPOSE CLEANING GUN• Unique Vortex Air Delivery System• One handed operation – with integrated air and water controls• Enables quick and efficient Cooling System flushing• Suits most radiator and heater hoses• Also suitable for engine and floor wash applications• Converts to Vacuum / Air Blow Gun

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Cool

ing

Syst

em

Auto Service Tools

Replacement blade availablePART No. 70594

PART No. 70675 Suits No. 2 PhillipsPART No. 70676 Suits 9/36” (7mm) Slot

Long Screwdrivers• Long 24” (610mm) shaft to access hard to reach areas• Chrome blade with reinforced tip

PART No. 70679

Radiator Hose Clamp Tool• Strong flexible shaft allows access to hard-to-get-at positions.• Supplied with 3 interchangeable size sockets 1/4” (6mm), 9/32” (7mm), 5/16” (8mm)

PART No. 70597

Large Hose Cutters• For cutting plastic, rubber and nylon hose• Razor sharp blade• One handed operation• Large Cutter 1/8” (3mm) to 1” (25mm)

PART No. 70824

Rubber Hose Cutter• Ideal for cutting Radiator and Heater hoses• Blade can be resharpened• Capacity: 3” (75mm)• Length: 10” (260mm)

PART No. 70533

Medium Line Clamp• Seals heater hose etc from 1/2” (13mm) to 3/4” (19mm) O.D.• Light weight, non conductive highly visible material• Quick and easy to use

PART No. 70684

Large Line Clamp• Seals radiator hose etc from 3/4” (19mm) to 2-1/4” (57mm)• Light weight, non conductive highly visible material• Quick and easy to use

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Cool

ing

Syst

em

Auto Service Tools

Replacement blade availablePART No. 70594

PART No. 70675 Suits No. 2 PhillipsPART No. 70676 Suits 9/36” (7mm) Slot

Long Screwdrivers• Long 24” (610mm) shaft to access hard to reach areas• Chrome blade with reinforced tip

PART No. 70679

Radiator Hose Clamp Tool• Strong flexible shaft allows access to hard-to-get-at positions.• Supplied with 3 interchangeable size sockets 1/4” (6mm), 9/32” (7mm), 5/16” (8mm)

PART No. 70597

Large Hose Cutters• For cutting plastic, rubber and nylon hose• Razor sharp blade• One handed operation• Large Cutter 1/8” (3mm) to 1” (25mm)

PART No. 70824

Rubber Hose Cutter• Ideal for cutting Radiator and Heater hoses• Blade can be resharpened• Capacity: 3” (75mm)• Length: 10” (260mm)

PART No. 70533

Medium Line Clamp• Seals heater hose etc from 1/2” (13mm) to 3/4” (19mm) O.D.• Light weight, non conductive highly visible material• Quick and easy to use

PART No. 70684

Large Line Clamp• Seals radiator hose etc from 3/4” (19mm) to 2-1/4” (57mm)• Light weight, non conductive highly visible material• Quick and easy to use


Page 171

Auto Service Tools


Cooling System

PART No. 70730

Medium Line Clamp Twin Pack• Handy twin pack of the popular P/N 70533 Line Clamp• Light weight, non conductive highly visible material

PART No. 70713

Line Clamp Master Pack• Handy twin pack of the popular P/N 70533 Line Clamp• Light weight, non conductive highly visible material

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools

Engine Service & Repair

PART No. 70981

Master Engine Oil Pressure Tester• 900mm long hose• Includes Gauge Protector• Range 0-100psi, 0-6.8Kg/cm2• Suits GM, Ford, Toyota, Honda and most imported vehicles

Adaptors Included:1/8” NPT1/8” BSP1/4” BSP8 x 1.00mm 8 x 1.25mm8 x 1.50mm10 x 1.00mm12 x 1.50mm14 x 1.50mm16 x 1.50mm18 x 1.50mm

PART No. 70912

Fluid Transfer Pump The Ultimate Accessory For Your Air Ratchet

Convert your 3/8” drive air ratchet into a fluid transfer pumpQuickly fill or drain fluids:• Brake Fluid, Power Steering Fluid, Transmission Fluid, Engine Oil, Coolant, Gear OilsFeatures • Easily engages with all 3/8” Dr. air ratchets, Pump securely attaches to air ratchet, Retaining bracket holds pump during use for one-hand operation Quick couple fittings allow:• Easy hose changes, No drip storage of pump, Pump primed for next useCaution• Not approved or intended for use with highly flammable fluids. Ratchet Pump must be purged of fluids if used for refilling to avoid cross-contamination. Do not use with fluids containing particle residue as they could impair pump operation.

PART No. 70890

E-Vac Fluid Evacuation Kit• Fast - No mess - Fluid removal• Environmentally friendly• Air operated “no moving parts” fluid extraction unit • Suitable for automotive, industrial, motorcycle, marine & heavy plant

equipment applications.• Oil extraction: Engine, Power Steering, Gear Box, Automatic transmission,

Differential, Marine, Industrial machinery• Fluid Extraction: Brake, Coolant, Hydraulic, Cutting, Lubricating• “Vacuum Hold” feature allows use even when disconnected from air supply• Extraction is achieved using deep vacuum technology• Automatic fluid shut off valve to prevent over filling• On-off flow tap• Quick connect fittings• Quick release air supply locking trigger• Carry handle & easy pour spout for fluid disposal.• Container & fittings constructed from chemical resistant materialsNote: NOT for use with Highly Flammable fluids.

SpecificationsSuction flow rate: Max 6 litres (12.7 pints) per minute.Air Pressure: Min 550Kpa (80psi) Max 900Kpa (130psi)Air Consumption: Max 180 Ltr/min (10 CFM) at 100psiVacuum: 25in.Hg at 100psiThread Connection: 1/4”BSPContainer Capacity: 7 litres (15 US pints)

PART No. 70818

Engine Oil Pressure Tester• Includes 1/8” NPT, 1/8” BSP and 1/4” BSP Adaptors• 900mm long hose• Includes Gauge Protector• Range 0-100psi 0-6.8Kg/cm2

Square Drive Attachment Pump BracketQuick Couple FittingDrill Adaptor

(Suitable for Cordless Drills)

*Air Ratchet not included.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools


PART No. 70981

Master Engine Oil Pressure Tester• 900mm long hose• Includes Gauge Protector• Range 0-100psi, 0-6.8Kg/cm2• Suits GM, Ford, Toyota, Honda and most imported vehicles

Adaptors Included:1/8” NPT1/8” BSP1/4” BSP8 x 1.00mm 8 x 1.25mm8 x 1.50mm10 x 1.00mm12 x 1.50mm14 x 1.50mm16 x 1.50mm18 x 1.50mm

PART No. 70912

Fluid Transfer Pump The Ultimate Accessory For Your Air Ratchet

Convert your 3/8” drive air ratchet into a fluid transfer pumpQuickly fill or drain fluids:• Brake Fluid, Power Steering Fluid, Transmission Fluid, Engine Oil, Coolant, Gear OilsFeatures • Easily engages with all 3/8” Dr. air ratchets, Pump securely attaches to air ratchet, Retaining bracket holds pump during use for one-hand operation Quick couple fittings allow:• Easy hose changes, No drip storage of pump, Pump primed for next useCaution• Not approved or intended for use with highly flammable fluids. Ratchet Pump must be purged of fluids if used for refilling to avoid cross-contamination. Do not use with fluids containing particle residue as they could impair pump operation.

PART No. 70890

E-Vac Fluid Evacuation Kit• Fast - No mess - Fluid removal• Environmentally friendly• Air operated “no moving parts” fluid extraction unit • Suitable for automotive, industrial, motorcycle, marine & heavy plant

equipment applications.• Oil extraction: Engine, Power Steering, Gear Box, Automatic transmission,

Differential, Marine, Industrial machinery• Fluid Extraction: Brake, Coolant, Hydraulic, Cutting, Lubricating• “Vacuum Hold” feature allows use even when disconnected from air supply• Extraction is achieved using deep vacuum technology• Automatic fluid shut off valve to prevent over filling• On-off flow tap• Quick connect fittings• Quick release air supply locking trigger• Carry handle & easy pour spout for fluid disposal.• Container & fittings constructed from chemical resistant materialsNote: NOT for use with Highly Flammable fluids.

SpecificationsSuction flow rate: Max 6 litres (12.7 pints) per minute.Air Pressure: Min 550Kpa (80psi) Max 900Kpa (130psi)Air Consumption: Max 180 Ltr/min (10 CFM) at 100psiVacuum: 25in.Hg at 100psiThread Connection: 1/4”BSPContainer Capacity: 7 litres (15 US pints)

PART No. 70818

Engine Oil Pressure Tester• Includes 1/8” NPT, 1/8” BSP and 1/4” BSP Adaptors• 900mm long hose• Includes Gauge Protector• Range 0-100psi 0-6.8Kg/cm2

Square Drive Attachment Pump BracketQuick Couple FittingDrill Adaptor

(Suitable for Cordless Drills)

*Air Ratchet not included.


Page 173

Auto Service Tools



PART No. 70716

Deluxe Compression Tester Kit• Assembles into every popular variation of screw-in or push-in style testers• Includes 10mm, 12mm, 14mm and 18mm screw in adaptors• Includes 70475 Gauge protector• Range 0-300psi (0-2000 Kpa)• Sturdy blow moulded case for safe storage• Spare screw-in adaptors 70402 10mm 70403 12mm 70218-11 14mm

PART No. 70431

Master Compression Tester Kit• Assembles into every popular variation of screw-in or push-in style testers• Range: 0-300 p.s.i. (0-2000kPa)

PART No. 70816

Universal Compression Tester Kit• Screw in Style Tester• Flexible Hose with quick connect fitting• Extension Hose with built in adaptors• 12mm, 14mm and 18mm screw in adaptors• Includes Gauge Protector• Supplied in Blow Moulded Case• Range 0-300PSI (0-2000Kpa)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools

70218-4Repair Kit

PART No. 70218

Cylinder Compression Tester• Flexible long-reach hose• Includes both 14mm and 18mm ‘screw-in’ type adaptors• Range: 0-300p.s.i. 0-2000kPa

70220-4Repair Kit

PART No. 70220

Four-In-One Compression Tester• Push-in style adaptors• Assembles in four different styles to suit any application• Range: 0-300p.s.i., 0-2000kPa

PART No. 70538

Leak-Down Tester• Pinpoints low compression causes i.e., burnt valves, worn rings etc• 0-200 PSI gauge allows monitoring of air pressure• Colour coded gauge show % cylinder leakage• Uses shop air• 18mm, 14mm & 14mm deep adaptors supplied

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools

70218-4Repair Kit

PART No. 70218

Cylinder Compression Tester• Flexible long-reach hose• Includes both 14mm and 18mm ‘screw-in’ type adaptors• Range: 0-300p.s.i. 0-2000kPa

70220-4Repair Kit

PART No. 70220

Four-In-One Compression Tester• Push-in style adaptors• Assembles in four different styles to suit any application• Range: 0-300p.s.i., 0-2000kPa

PART No. 70538

Leak-Down Tester• Pinpoints low compression causes i.e., burnt valves, worn rings etc• 0-200 PSI gauge allows monitoring of air pressure• Colour coded gauge show % cylinder leakage• Uses shop air• 18mm, 14mm & 14mm deep adaptors supplied


Page 175

Auto Service Tools



PART No. 70576

Master Diesel Engine Compression Tester• 0-1000p.s.i. (0-6890 kPa) gauge with long reach hose complete with quick-connect coupler and rubber gauge protector• Complete with the following adaptors:

MACK, FORD,BEDFORD, FIAT, ALLIS, SCANIA, JOHN DEERECInjector styleSize: 21mm Dia.PART No. 70501

AUDI, VW, VOLVO, MERCEDES,CUMMINSSize: 24mm x 2mmPART No. 70498

GM / ISUZUGlow plug styleSize: 10mm x 1.25mmPART No. 70223

GMGlow plug styleSize: 10mm x 1.00mmPART No. 70225

TOYOTAGlow plug styleSize: 10mm x 1.25mmPART No. 70224

PART No. 70222

Diesel Engine Compression Tester• Flexible long reach hose• Range: 0-1000 p.s.i., 0-6890 kPa• Adaptors supplied: GM / Isuzu 10 x 1.25mm Toyota 10 x 1.25mm GM 10 x 1.00mm

70222-4Repair Kit

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools


MERCEDESGlow plug styleSize: 12mm x 1.25mmPART No. 70226


CUMMINSLRG & SMLInjector styleSize: 7/8” Dia. - Sml 1” Dia. - LrgPART No. 70500

GM 6.2 & 6.5LLong glow plugSize: 10mm x 1.00mm longPART No. 70497

BMW, PEUGEOTGlow plug styleSize: 18mm x 1.5mmPART No. 70499


MOTORMETER CONVERSION ADAPTORSize: Adapts ABW tester to any Motormeter adaptorPART No. 70503

FORD, MAZDA, TOYOTAGlow plug styleSize: 10mm x 1.25mm MediumPART No. 70504

MACK, FORD,BEDFORD, FIAT, ALLIS, SCANIA, JOHN DEER ETCInjector styleSize: 21mm Dia.PART No. 70501

CATERPILLARCAPSULE NOZZLEInjector styleSize: 9/16” UNFPART No. 70509

CATERPILLAR, CASE, JOHN DEEREInjector styleSize: 3/8” Dia.PART No. 70508

FORDInjector styleSize: 17mm Dia.PART No. 70507


NISSANGlow plug styleSize: 24mm x 2mmPART No. 70227

RENAULT & PEUGOTInjector styleSize: 24mm x 2.0mmPART No. 70228

RENAULT & OPELInjector styleSize: 22mm x 1.5mmPART No. 70229

VWLong glow plugSize: 10mm x 1.00mm PART No. 70230

MERCEDESInjector styleSize: 22mm x 1.5mmPART No. 70231

EXTENSION4” - Fits between ourcompression testerand adaptorsPART No. 70221

DETROIT DIESEL53, 71, 92 ETCInjector styleSize: 25mm Dia.PART No. 70502

CASE / CUMMINS “C” SERIESInjector styleSize: 17mm Dia.PART No. 70506

CASE / CUMMINS “B” SERIESInjector styleSize: 24mm x 1.5mmPART No. 70505

BRITISH LEYLANDLAND ROVERGlow plugSize: 14mm x 1.25mmPART No. 70233

FORD 7.3L TURBOLong glow plugSize: 10mm x 1.00mm PART No. 70232

Diesel Compression Testing Adaptors

70498 24mm x 2.0 1.78

70228 24mm x 2.0 1.67

70225 10mm x 1.0 .990

70229 22mm x 1.5 1.53

70223 10mm x 1.25 1.65

70504 10mm x 1.25 1.64

70230 10mm x 1.0 3.68

70497 10mm x 1.0 3.08

70231 22mm x 1.5 2.01

70226 12mm x 1.25 1.06

70224 10mm x 1.25 1.31

70232 10mm x 1.0 2.70

70227 24mm x 2.0 1.47

70499 18mm x 1.50 1.70

70501 .800 & .820 (Dual) ADJ

70500 Dual-Cummins 4.67/5.29

70502 Detriot Diesel 4.88*

70233 14mm x 1.25 2.00

70505 24mm x 1.5 2.77

70506 0.67 6.01*

70507 0.67 5.51*

70508 0.625 6.15*

70509 7/8 x 14 3.70

Note: Images are not to scale.

Part No. Thread or Diameter

Distance from end of Hex or Bracket (Apprx)





Measurements with * are measured from bottom of qc plug to bottom of injector

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools


MERCEDESGlow plug styleSize: 12mm x 1.25mmPART No. 70226


CUMMINSLRG & SMLInjector styleSize: 7/8” Dia. - Sml 1” Dia. - LrgPART No. 70500

GM 6.2 & 6.5LLong glow plugSize: 10mm x 1.00mm longPART No. 70497

BMW, PEUGEOTGlow plug styleSize: 18mm x 1.5mmPART No. 70499


MOTORMETER CONVERSION ADAPTORSize: Adapts ABW tester to any Motormeter adaptorPART No. 70503

FORD, MAZDA, TOYOTAGlow plug styleSize: 10mm x 1.25mm MediumPART No. 70504

MACK, FORD,BEDFORD, FIAT, ALLIS, SCANIA, JOHN DEER ETCInjector styleSize: 21mm Dia.PART No. 70501

CATERPILLARCAPSULE NOZZLEInjector styleSize: 9/16” UNFPART No. 70509

CATERPILLAR, CASE, JOHN DEEREInjector styleSize: 3/8” Dia.PART No. 70508

FORDInjector styleSize: 17mm Dia.PART No. 70507


NISSANGlow plug styleSize: 24mm x 2mmPART No. 70227

RENAULT & PEUGOTInjector styleSize: 24mm x 2.0mmPART No. 70228

RENAULT & OPELInjector styleSize: 22mm x 1.5mmPART No. 70229

VWLong glow plugSize: 10mm x 1.00mm PART No. 70230

MERCEDESInjector styleSize: 22mm x 1.5mmPART No. 70231

EXTENSION4” - Fits between ourcompression testerand adaptorsPART No. 70221

DETROIT DIESEL53, 71, 92 ETCInjector styleSize: 25mm Dia.PART No. 70502

CASE / CUMMINS “C” SERIESInjector styleSize: 17mm Dia.PART No. 70506

CASE / CUMMINS “B” SERIESInjector styleSize: 24mm x 1.5mmPART No. 70505

BRITISH LEYLANDLAND ROVERGlow plugSize: 14mm x 1.25mmPART No. 70233

FORD 7.3L TURBOLong glow plugSize: 10mm x 1.00mm PART No. 70232

Diesel Compression Testing Adaptors

70498 24mm x 2.0 1.78

70228 24mm x 2.0 1.67

70225 10mm x 1.0 .990

70229 22mm x 1.5 1.53

70223 10mm x 1.25 1.65

70504 10mm x 1.25 1.64

70230 10mm x 1.0 3.68

70497 10mm x 1.0 3.08

70231 22mm x 1.5 2.01

70226 12mm x 1.25 1.06

70224 10mm x 1.25 1.31

70232 10mm x 1.0 2.70

70227 24mm x 2.0 1.47

70499 18mm x 1.50 1.70

70501 .800 & .820 (Dual) ADJ

70500 Dual-Cummins 4.67/5.29

70502 Detriot Diesel 4.88*

70233 14mm x 1.25 2.00

70505 24mm x 1.5 2.77

70506 0.67 6.01*

70507 0.67 5.51*

70508 0.625 6.15*

70509 7/8 x 14 3.70

Note: Images are not to scale.







Measurements with * are measured from bottom of qc plug to bottom of injector


Page 177

Auto Service Tools



PART No. 70136

Engine Cylinder Hone• Flexible shaft, adjustable tension• Range: 2” (51mm) to 7” (178mm)• Stones fitted: 4” (102mm) medium 220 grit• Replacements available in fine, medium or coarse grit

PART No. 70135: Fine 400 gritPART No. 70134: Medium 220 gritPART No. 70133: Coarse 100 grit

Replacement Stone Sets• Suitable for Hone No. 70136• 4” (102mm) long

PART No. 70211

Piston Ring Compressors• Range: 3-1/2” (89mm) to 7” (178mm) Height: 3-1/2” (89mm)• Ratchet action• Double band adjustable tension

No. 70151: Fine 400 grit, 2” (51mm) longNo. 70150: Medium 220 grit, 2” (51mm) long

Replacement Stone Sets• Suitable for Hone No. 70152

PART No. 70152

Small Engine Cylinder Hone• Flexible shaft, adjustable tension• Range: 1-1/4” (32mm) to 3-1/2” (89mm)• Stones fitted: 2” (51mm) medium 220 grit• Replacements available in fine or medium grit

PART No. 70209

Piston Ring Compressors• Range: 2-1/8” (53mm) to 5” (127mm) Height: 3-1/2” (89mm)• Ratchet action• Double band adjustable tension• Standard size for most cars

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools

PART No. 70245

Universal Piston Ring Expander• Avoids broken rings

PART No. 70415

Adjustable Piston Ring Installer• Tapered jaws grip and expand ring easily over piston• Adjustable stop prevents over- expanding and reduces ring breakage

PART No. 70829

Oil Pressure Switch Socket• For removal & replacement of oil pressure switches• Dual size socket fits 1” (25mm) & 1-1/16 (34mm) switches• 3/8” Square Drive

PART No. 70267

Mechanics Stethoscope• Locates troublesome noises easily• Ideal for fuel injector testing

PART No. 70125Small 2-7/8”(73mm) to 3-1/4 (83mm)PART No. 70127 Medium 3-7/16”(87mm) to 3-3/4” (95mm)PART No. 70128Large 4”(102mm) to 4-3/8” (112mm)

Swivel Grip Filter Wrenches• Reaches inaccessible filters• Unique design provides a firm grip

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools

PART No. 70245

Universal Piston Ring Expander• Avoids broken rings

PART No. 70415

Adjustable Piston Ring Installer• Tapered jaws grip and expand ring easily over piston• Adjustable stop prevents over- expanding and reduces ring breakage

PART No. 70829

Oil Pressure Switch Socket• For removal & replacement of oil pressure switches• Dual size socket fits 1” (25mm) & 1-1/16 (34mm) switches• 3/8” Square Drive

PART No. 70267

Mechanics Stethoscope• Locates troublesome noises easily• Ideal for fuel injector testing

PART No. 70125Small 2-7/8”(73mm) to 3-1/4 (83mm)PART No. 70127 Medium 3-7/16”(87mm) to 3-3/4” (95mm)PART No. 70128Large 4”(102mm) to 4-3/8” (112mm)

Swivel Grip Filter Wrenches• Reaches inaccessible filters• Unique design provides a firm grip


Page 179

Auto Service Tools



PART No. 70123

Strap Filter Wrench• Sturdy non-slip nylon strap• Suits all filters up to 6” (152mm) dia.

PART No. 70733

Mini Swivel Grip Filter Wrench• Size: 2-3/8”(60mm) to 2-7/8” (73mm) • Reaches inaccessible filters• Unique design provides a firm grip

PART No. 70385

Three Legged Oil Filter Wrench• Gets into tight locations easily• Heavy duty construction• The special design allows for a wide range from 2-3/8” (60mm) to 4-3/4”(121mm)• 3/8” square drive

PART No. 70584

Large 2 Way Oil Filter Wrench• Reversible style enables removal or fitting of filters in hard to reach places• Suits filters 2-7/16” (62mm) to 4-3/4” (121mm) diameter• Operated by 3/8” drive handle or 3/4” wrench

PART No. 70805

Universal 3 Jaw Oil Filter Wrench• Use with any 3/8” drive ratchet or extension• Suits oil filter sizes 25/16” (58mm) to 3-3/4” (95mm)• Compact design for hard to get at oil filters

PART No. 70831

Oil Filer Wrench - Steel Jaws• Compact design for tight working areas• Spring controlled steel jaws• Suits oil filter sizes 2-1/2” (65mm) to 3-1/8” (80mm)• 3/8” Square Drive

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools

Optional Jaws For The 70362 Valve Spring CompressorPART No. 70360Medium Offset

PART No. 70359Small Straight

PART No. 70361Large Straight

PART No. 70469

Deluxe Strap Wrench• Heavy duty nylon strap, suits filters and other objects up to 9” (229mm) dia • Use with any 3/8” or 1/2” square drive

PART No. 70448

Spark Plug Thread Chaser• Removes carbon build-up and metal particles from 14 mm and 18mm spark

plug holes

PART No. 70351

Hydraulic Valve Lifter RemoverRemoves stuck hydraulic valve lifters on most domestic models

• The expandable collet securely holds the lifter for easy removal of even the tightest lifters.

PART No. 70412

Spark Plug Thread Insert Kit• Repairs damaged 14mm spark plug threads in aluminium cylinder heads• Full instructions included

PART No. 70362

Valve Spring Compressor• Suits most cars and light trucks• Fast – one adjustment sets the tool for the rest of the head• Spring diameter: 1” (25mm) to 2” (51mm)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools

Optional Jaws For The 70362 Valve Spring CompressorPART No. 70360Medium Offset

PART No. 70359Small Straight

PART No. 70361Large Straight

PART No. 70469

Deluxe Strap Wrench• Heavy duty nylon strap, suits filters and other objects up to 9” (229mm) dia • Use with any 3/8” or 1/2” square drive

PART No. 70448

Spark Plug Thread Chaser• Removes carbon build-up and metal particles from 14 mm and 18mm spark

plug holes

PART No. 70351

Hydraulic Valve Lifter RemoverRemoves stuck hydraulic valve lifters on most domestic models

• The expandable collet securely holds the lifter for easy removal of even the tightest lifters.

PART No. 70412

Spark Plug Thread Insert Kit• Repairs damaged 14mm spark plug threads in aluminium cylinder heads• Full instructions included

PART No. 70362

Valve Spring Compressor• Suits most cars and light trucks• Fast – one adjustment sets the tool for the rest of the head• Spring diameter: 1” (25mm) to 2” (51mm)


Page 181

Auto Service Tools



PART No. 70896

Camclamp - Timing Gear Clamp

Master set contains the dual CamClamp and CamClamp singles • Use on single, dual or quad overhead cam engines to hold valve timing during belt replacement• Ideal for Diesel injection pump belt replacement

Features• Easy to use / Installs in seconds• Patented ‘Uni-Fit’ positive lock tooth design securely engages all cam gear sizes • Constructed from high strength industrial grade non-corrosive materials• Moulded Tray


INSTALLS IN SECONDS INSTALLS IN SECONDS SINGLE OVERHEAD CAM DUAL OVERHEAD CAMTWIN CAM QUAD CAM

PART No. 70364

Overhead Valve Spring Compressor• No need to remove cylinder head• Long, tapered offset jaws for a sure grip

PART No. 70715

Valve Hold Up Hose• Allows for replacement of valve seals and valve springs without removal

of head• Flexible hose with 14mm and 18mm adaptors on one end. Other end has

1/4NPT to allow hook up to standard air lines

PART No. 70511

Deluxe Overhead Valve Spring Compressor• No need to remove cylinder head• Large comfortable grip handle

PART No. 70915

Angular Torque Gauge• Allows correct tensioning of Fasteners by degrees of Torque.• Adjustable arm holds angle scale stationary.• 3600 angle scale in 20 increments and intervals of 100 and 300 • 1/2” Square Drive

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools

PART No. 70803

Engine Support Bar• Safely supports engine while transaxle is removed• Height adjustable hook• Ideal for front wheel drive vehicles• Locates securely in engine bay channels• Fully adjustable, self leveling legs• 500kg safe working load• 1500mm maximum working length• 900mm long chain

Removalof wick

Installationof wick

PART No. 70735

Engine Chain Hoist• Designed for easy removal of automobile engines, transmissions etc• Consists of 28”(710mm) heat treated alloy steel chain with lock plates

and safety ring• Lifting capacity 1/2 ton (500kg)

PART No. 70270

Seal Puller• Two hook sizes to handle most seal sizes• Comfortable moulded handle• Spare blade supplied

PART No. 70421

Rear Main Bearing Seal Remover / Installer• Change seals without removing engine or crankshaft• Works on wick type seals• Removes neoprene type seals

PART No. 00145

Fender Cover• Professional quality• Foam backed to protect paintwork• Magnetic strip to hold in place

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools

PART No. 70803

Engine Support Bar• Safely supports engine while transaxle is removed• Height adjustable hook• Ideal for front wheel drive vehicles• Locates securely in engine bay channels• Fully adjustable, self leveling legs• 500kg safe working load• 1500mm maximum working length• 900mm long chain

Removalof wick

Installationof wick

PART No. 70735

Engine Chain Hoist• Designed for easy removal of automobile engines, transmissions etc• Consists of 28”(710mm) heat treated alloy steel chain with lock plates

and safety ring• Lifting capacity 1/2 ton (500kg)

PART No. 70270

Seal Puller• Two hook sizes to handle most seal sizes• Comfortable moulded handle• Spare blade supplied

PART No. 70421

Rear Main Bearing Seal Remover / Installer• Change seals without removing engine or crankshaft• Works on wick type seals• Removes neoprene type seals

PART No. 00145

Fender Cover• Professional quality• Foam backed to protect paintwork• Magnetic strip to hold in place


Page 183

Auto Service Tools



PART No. 70865

Powerbar Hand Impact Wrench• Allows access to restricted under bonnet areas – where Air Impact Wrenches won’t fit• Remove and Replace Harmonic Balancer Pulleys without removing the radiator• Impact force “shocks” bolts loose• No Compressed Air required.• Stop burning out starter motors• High torque generated up to 600ft/lb – dependant on force applied• Ideal for Automotive, Industrial and Home applications

SpecificationsLength 560mm1/2” Square DriveRecommended for use with Impact SocketsTested to max 600ft/lb torque

Optimim Operating Angle


PART No. 70799

Heavy Duty Universal & Gm Harmonic Balancer Puller• GM forcing screw & bolts suit GM 3.8 L V6 balancer pulleys • Heavy duty forcing screw & bolt kit suits most harmonic balancers, timing

gears & pulleys with 2/3 tapped holes

SPECIFICATIONSBolt Sizes: 1/4” UNF x 3” (3 Pieces) 10mm x 50mm (3 Pieces) 5/16” x 2” (3 Pieces) 8mm x 80mm (3 Pieces) 3/8“ x 2” (3 Pieces) 3/8” x 4” (2 Pieces)

PART No. 70156

Harmonic Balancer Puller• Five sets of bolts included in metric and imperial sizes• Floating pressure point

Pulley Removal

Pulley Installation

PART No. 70832

Alternator & Power Steering Pump Pulley Remover/Installer• Reversible 2 in 1 tool removes and installs pressed fit power steering

pulleys• 2 flange sizes suits most pressed fit alternator pulleys• Suits pulleys with hub diameters in 1-1/8” (28mm), 1-1/4” (32mm),

1-5/16” (34mm) & 1-3/8” (35mm). Ford, GM and others

PART No. 70745

Power Steering Pulley Installer• Installs the pulley on power steering pumps• Suits Ford, GM, Chrysler etc

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools

PART No. 70741

Ford Fan Hub Spanner• Used for removing free wheeling fan hubs on Ford vehicles• Industrial finish to prevent rusting• Size: 32mm

PART No. 70990

Serpentine Belt Tool Set• Used to remove & install serpentine belts• Releases spring tension on the idler pulley• Provide access to confined areas• Set includes: Long handle (360mm), Geared wrench (200mm), Square drive adapters (3/8, 1/2, 1/4”), Crowsfoot wrenches (13, 14, 15mm), Shallow sockets (13, 14, 15, 16, 17, 18, 19mm)

PART No. 70992

Universal Pulley Holder• Used to hold bolt on pulleys• One tool suits most applications• Grips onto mounting bolts/nuts• Use in conjunction with fan hub spanner

PART No. 70609

Stainless Steel Scissors• General purpose scissors for cutting paper gaskets, trim work etc.• Extra sharp surgical grade stainless steel blades• Non - corrosive• 6-5/16” (160mm) long

PART No. 70269

Gasket Scraper• Forged alloy steel blade• Comfortable handle grip• Blade width: 1” (25mm)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Engi

ne S

ervi

ce &

Rep

air

Auto Service Tools

PART No. 70741

Ford Fan Hub Spanner• Used for removing free wheeling fan hubs on Ford vehicles• Industrial finish to prevent rusting• Size: 32mm

PART No. 70990

Serpentine Belt Tool Set• Used to remove & install serpentine belts• Releases spring tension on the idler pulley• Provide access to confined areas• Set includes: Long handle (360mm), Geared wrench (200mm), Square drive adapters (3/8, 1/2, 1/4”), Crowsfoot wrenches (13, 14, 15mm), Shallow sockets (13, 14, 15, 16, 17, 18, 19mm)

PART No. 70992

Universal Pulley Holder• Used to hold bolt on pulleys• One tool suits most applications• Grips onto mounting bolts/nuts• Use in conjunction with fan hub spanner

PART No. 70609

Stainless Steel Scissors• General purpose scissors for cutting paper gaskets, trim work etc.• Extra sharp surgical grade stainless steel blades• Non - corrosive• 6-5/16” (160mm) long

PART No. 70269

Gasket Scraper• Forged alloy steel blade• Comfortable handle grip• Blade width: 1” (25mm)


Page 185

Auto Service Tools




PART No. 70801

Multipurpose Cleaning GunFEATURES• One handed operation• Quick Connect Coupling*• Integrated Air and Water Controls• Suits most Radiator and Heater Hoses• Converts to Vacuum/Air Blow Gun

FUNCTIONS• Cooling System Flushing• Engine Bay Washing• Brake System Cleaning• Floor Washing• Wet or Dry Vacuuming• Air Blow Gun

PART No. 70721

Flow Through Parts Brush Tube• Replacement tube to suit most flow through part washing systems

PART No. 70720

Parts Washing Brush• Durable, cone shaped nylon bristles help penetrate grease and won’t

deform• Solid nylon handle

PART No. 70672

Parts Washer Brush• Replacement flow through brush for most popular parts washers• Solid nylon construction with external jets to assist in removal of grease

build ups and keep brush tip clean• Durable cone shaped nylon bristles help penetrate grease and won’t

deform

PART No. 70474

Wooden Handled Parts Brush• Long lasting nylon bristles, impervious to general cleaning solvents• Extra fine bristles access the smallest of areas e.g. bearings, O-ring

grooves etc.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Bra

ke

Auto Service Tools

PATENT PENDINGPATENT INSURED Accessories not included.

Brake

PART No. 70850

Brake Bleeding Kit• Allows one man operation• Fast efficient vacuum bleeding • 500ml (18.5 fl oz) container equipped with overfill check valve• Quick release locking trigger• Universal rubber bleed screw fitting• 700mm (28”) bleeder hose• Convienient hanging hook• Operates on shop air

SPECIFICATIONSAir Pressure: Min 550KPa (80psi) Max 900KPa (130psi)Air Consumption: Max 180 Ltr/min (10 CFM) at 100psiVacuum: 24in.Hg at 100psiThread Connection: 1/4”BSPContainer Capacity: 500ml

PART No. 70856

Quickdraw Brake Bleeding KitFast Efficient Vacuum Brake Bleeding• The Ultimate One Person Brake Bleeding System• Automatically bleed brakes and refills the fluid reservoir• Saves Time and Money

Vacuum Brake Bleeder: • Compact size fits easily in the wheel area• Universal rubber fitting holds securely on brake bleed screw• Convenient hanging hook and quick release trigger allows hands free operation• Internal overfill valve prevents brake fluid spray if container reaches capacity• Clear drain hose provides visible inspection of old fluid during bleeding• On-off switch prevents spills when not in use• Operates on shop air• Container Capacity: 500ml (18.5 fl. oz.)

Brake Fluid Reservoir Refiller: • Automatically refills brake fluid reservoir during brake bleeding• Retaining clip provides positive clamping to all master cylinder reservoir types• Height adjustment positions filler spout to maintain correct fluid level during brake bleeding; prevents running brake fluid reservoir dry• Positive venting system supplies unbroken continual fluid flow• On-off tap allows use and storage plus eliminates brake fluid spills• Container Capacity: 600ml (20.0 fl. oz.) PATENTED

PATENT INSURED

Vacuum Brake Bleeder Automatic Reservoir Refiller

PART No. 70890

E-Vac Fluid Evacuation Kit• Fast - No mess - Fluid removal• Environmentally friendly• Air operated “no moving parts” fluid extraction unit • Suitable for automotive, industrial, motorcycle, marine & heavy plant equipment applications• Oil extraction: Engine, Power Steering, Gear Box, Automatic transmission, Differential, Marine, Industrial machinery• Fluid Extraction: Brake, Coolant, Hydraulic, Cutting, Lubricating• “Vacuum Hold” feature allows use even when disconnected from air supply• Extraction is achieved using deep vacuum technology• Automatic fluid shut off valve to prevent over filling• On-off flow tap• Quick connect fittings• Quick release air supply locking trigger• Carry handle & easy pour spout for fluid disposal.• Container & fittings constructed from chemical resistant materialsNote: NOT for use with Highly Flammable fluids.

SPECIFICATIONSSuction flow rate: Max 6 litres (12.7 pints) per minute.Air Pressure: Min 550Kpa (80psi) Max 900Kpa (130psi)Air Consumption: Max 180 Ltr/min (10 CFM) at 100psiVacuum: 25in.Hg at 100psiThread Connection: 1/4”BSPContainer Capacity: 7 litres (15 US pints) PATENT PENDING

PATENT INSURED

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Bra

ke

Auto Service Tools

PATENT PENDINGPATENT INSURED Accessories not included.

Brake

PART No. 70850

Brake Bleeding Kit• Allows one man operation• Fast efficient vacuum bleeding • 500ml (18.5 fl oz) container equipped with overfill check valve• Quick release locking trigger• Universal rubber bleed screw fitting• 700mm (28”) bleeder hose• Convienient hanging hook• Operates on shop air

SPECIFICATIONSAir Pressure: Min 550KPa (80psi) Max 900KPa (130psi)Air Consumption: Max 180 Ltr/min (10 CFM) at 100psiVacuum: 24in.Hg at 100psiThread Connection: 1/4”BSPContainer Capacity: 500ml

PART No. 70856

Quickdraw Brake Bleeding KitFast Efficient Vacuum Brake Bleeding• The Ultimate One Person Brake Bleeding System• Automatically bleed brakes and refills the fluid reservoir• Saves Time and Money

Vacuum Brake Bleeder: • Compact size fits easily in the wheel area• Universal rubber fitting holds securely on brake bleed screw• Convenient hanging hook and quick release trigger allows hands free operation• Internal overfill valve prevents brake fluid spray if container reaches capacity• Clear drain hose provides visible inspection of old fluid during bleeding• On-off switch prevents spills when not in use• Operates on shop air• Container Capacity: 500ml (18.5 fl. oz.)

Brake Fluid Reservoir Refiller: • Automatically refills brake fluid reservoir during brake bleeding• Retaining clip provides positive clamping to all master cylinder reservoir types• Height adjustment positions filler spout to maintain correct fluid level during brake bleeding; prevents running brake fluid reservoir dry• Positive venting system supplies unbroken continual fluid flow• On-off tap allows use and storage plus eliminates brake fluid spills• Container Capacity: 600ml (20.0 fl. oz.) PATENTED

PATENT INSURED

Vacuum Brake Bleeder Automatic Reservoir Refiller

PART No. 70890

E-Vac Fluid Evacuation Kit• Fast - No mess - Fluid removal• Environmentally friendly• Air operated “no moving parts” fluid extraction unit • Suitable for automotive, industrial, motorcycle, marine & heavy plant equipment applications• Oil extraction: Engine, Power Steering, Gear Box, Automatic transmission, Differential, Marine, Industrial machinery• Fluid Extraction: Brake, Coolant, Hydraulic, Cutting, Lubricating• “Vacuum Hold” feature allows use even when disconnected from air supply• Extraction is achieved using deep vacuum technology• Automatic fluid shut off valve to prevent over filling• On-off flow tap• Quick connect fittings• Quick release air supply locking trigger• Carry handle & easy pour spout for fluid disposal.• Container & fittings constructed from chemical resistant materialsNote: NOT for use with Highly Flammable fluids.

SPECIFICATIONSSuction flow rate: Max 6 litres (12.7 pints) per minute.Air Pressure: Min 550Kpa (80psi) Max 900Kpa (130psi)Air Consumption: Max 180 Ltr/min (10 CFM) at 100psiVacuum: 25in.Hg at 100psiThread Connection: 1/4”BSPContainer Capacity: 7 litres (15 US pints) PATENT PENDING

PATENT INSURED


Page 187

Auto Service Tools


Brake

PART No. 80500

Pressure Brake Bleeder• Make replacing your brake fluid a quick and simple task• Operation can be completed by a single operator in around 15 minutes• Fluid can be changed as well as bleeding the system• Operates off 12 volt supply (cars own battery)• Supplied with a range of screw on cap adapters (4 sizes)• Suitable for clutch bleed as well as brake bleed


PART No. 70895

Autofill Brake Bleeder Automatic Refiller• Automatically Fills Brake Fluid Reservoir During Bleeding• No More Running Reservoir Empty• Saves Time and Money• Eliminates Spills onto Paintwork

SPECIFICATIONS• 600MI (20 Fl oz.) container

PART No. 70010

One-Man Brake Bleeder• Handles both master and wheel cylinders• Tapered plugs suit all bleed screw fittings• Magnet holds bottle above cylinder for positive sealing with no air

re-entry• Full instructions included

PART No. 81100

Brake Fluid Safety Meter• Checks the condition of brake fluid accurately in under 1 minute• Increase brake servicing revenue• Award winning ergonomic design• Operates off 12 volt supply - cars own battery• Supplied to the world’s leading brake and brake fluid manufacturers• User friendly• Now available up to 3200c (6080f) - suitable for use on new brake fluid and racing fluids• Will not operate if connected to the wrong polarity• LCD display screen instructions lead operator through the complete testing sequence

PART No. 70858

Manual Brake Bleeder KitBRAKE FLUID RESERVOIR REFILLER• Automatically refills brake fluid reservoir during brake bleeding• Retaining clip provides positive clamping to all master cylinder reservoir

types• Height adjustment positions filler spout to maintain correct fluid level

during brake bleeding; prevents running brake fluid reservoir dry• Positive venting system supplies unbroken continual fluid flow• On-off tap allows use and storage plus eliminates brake fluid spills• Container Capacity: 600ml (20.0 fl. oz.)

BRAKE BLEED BOTTLE• Universal rubber fitting holds securely on brake bleed screw• Large collection bottle prevents overfilling• Internal submersed tube prevents air drawback during brake bleeding • Hanging hook for hands free use

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Bra

ke

Auto Service Tools

Under Dash

Engine Bay Brake Bleeding

PART No. 80000

Testvac - Automotive Vacuum Test KitThe complete kit for all vacuum testing and brake bleedingrequirements.• Hand held vacuum pump - compact design, one handed operation• Allows fast efficient static testing and monitoring of many vacuum operated components: 1. Diagnostic - vacuum leaks, valve timing, engine condition 2. Engine Bay - distributors, carburettors, EFI, EGR & PCV valves 3. Under Dash - heaters, air conditioners, door locks• Allows one man brake bleeding• Safely transfers fluids• Ergonomic handle design• Regulated vacuum relief valve

SPECIFICATIONSGauge: 0-30in.HgVacuum: up to 27in.HgContainer Capacity: 120ml (4oz)


PART No. 70826

Universal Caliper Wind Back Kit• Used to return rear disc brake pisons when replacing brake pads• 11 piece kit suiting a wide range of domestic and imported passenger vehicles• Stored in blow moulded case

PART No. 70013

Rear Disc Brake Piston Tool• Provides a firm grip for rotating the piston back into the caliper• Suits most of the following: Falcon: XB, XC, XD Fairlane: ZJ LTD: FC Kingswood: HJ, HX, HZ

PART No. 70214

Disc Brake Pad Spreader• Enables quick, easy changing of disc pads• Smooth even action

PART No. 70667

Universal Rear Disc Brake Caliper Tool• 3/8” square drive• Fits six different piston cavity configurations• Used to return piston when replacing pads

PART No. 70016

Rear Disc Brake Piston Tool• Provides a firm grip for rotating the piston back into the caliper• Suits most of the following: Falcon: XE, XF Fairlane: ZK LTD: FD

PART No. 70018

Rear Disc Brake Piston Tool• Provides a firm grip for rotating the piston back into the caliper• Suits most of the following: Falcon: EA, EB, ED Fairlane: NA LTD: DA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Bra

ke

Auto Service Tools

Under Dash

Engine Bay Brake Bleeding

PART No. 80000

Testvac - Automotive Vacuum Test KitThe complete kit for all vacuum testing and brake bleedingrequirements.• Hand held vacuum pump - compact design, one handed operation• Allows fast efficient static testing and monitoring of many vacuum operated components: 1. Diagnostic - vacuum leaks, valve timing, engine condition 2. Engine Bay - distributors, carburettors, EFI, EGR & PCV valves 3. Under Dash - heaters, air conditioners, door locks• Allows one man brake bleeding• Safely transfers fluids• Ergonomic handle design• Regulated vacuum relief valve

SPECIFICATIONSGauge: 0-30in.HgVacuum: up to 27in.HgContainer Capacity: 120ml (4oz)


PART No. 70826

Universal Caliper Wind Back Kit• Used to return rear disc brake pisons when replacing brake pads• 11 piece kit suiting a wide range of domestic and imported passenger vehicles• Stored in blow moulded case

PART No. 70013

Rear Disc Brake Piston Tool• Provides a firm grip for rotating the piston back into the caliper• Suits most of the following: Falcon: XB, XC, XD Fairlane: ZJ LTD: FC Kingswood: HJ, HX, HZ

PART No. 70214

Disc Brake Pad Spreader• Enables quick, easy changing of disc pads• Smooth even action

PART No. 70667

Universal Rear Disc Brake Caliper Tool• 3/8” square drive• Fits six different piston cavity configurations• Used to return piston when replacing pads

PART No. 70016

Rear Disc Brake Piston Tool• Provides a firm grip for rotating the piston back into the caliper• Suits most of the following: Falcon: XE, XF Fairlane: ZK LTD: FD

PART No. 70018

Rear Disc Brake Piston Tool• Provides a firm grip for rotating the piston back into the caliper• Suits most of the following: Falcon: EA, EB, ED Fairlane: NA LTD: DA


Page 189

Auto Service Tools


Brake

PART No. 70767

3 In 1 Hone Pack• Full range of brake cylinder hones in 2 and 3 legged styles• Incorporating ABW Part Numbers 70141, 70145 and 70148 in vinyl pouch• Replacement stones available in fine medium and coarse

PART No. 70148

Disc Brake Cylinder Hone• Flexible shaft, adjustable tension• Range: 1-1/4” (32mm) to 3-1/2” (89mm)• Stones fitted: 3/4”(19mm) fine 400 grit• Replacement stones available

PART No. 70141

Brake Cylinder Hone• Flexible shaft, adjustable tension• 3-arm design • Range: 3/4” (19mm) to 2-1/2” (64mm)• Stones fitted: 28mm medium 220 grit• Replacement available in fine, medium or coarse grit

PART No. 70145

Brake Cylinder Hone• Flexible shaft, adjustable tension• 2-arm design • Range: 23/32” (18mm) to 2-1/4” (57mm)• Stones fitted: 1-1/8” (28mm) medium 220 grit• Replacement available in fine or medium grit

No. 70140: Fine 400 grit, 1-1/8” (28mm) longNo. 70139: Medium 220 grit, 1-1/8” (28mm) longNo. 70138: Coarse 100 grit, 1-1/8” (28mm) long

Replacement Stone Sets• Suitable for Hone No’s. 70141 & 70148

No. 70144: Fine 400 grit, 1-1/8” (28mm) longNo. 70143: Medium 220 grit, 1-1/8” (28mm) long

Replacement Stone Sets• Suitable for Hone No. 70145

PART No. 70847

Heavy Duty Disc Brake Pad Spreader• Enables quick and easy changing of disc brake pads• Suits twin caliper Brake systems found on late model Ford & GM vehicles• 3 forcing bolt positions allow use on both single & twin piston brake calipers

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Bra

ke

Auto Service Tools

PART No. 70437

Steel Flexible Line Clamp• Completely or partially closes flexible brake, fuel, vacuum lines• All steel construction with adjustable locking collar

PART No. 70717

Small Line Clamp Twin Pack• Handy twin pack of the popular P/N 70035 line clamp• Light weight, non conductive highly visible material

PART No. 70035



PART No. 70718

Small Line Clamp Four Pack• Handy four pack of the popular P/N 70035 line clamp• Light weight, non conductive highly visible material

PART No. 70723

Small Brake Adjusting Tool• Small design for servicing brakes when access is limited

PART No. 70724

Large Brake Adjusting Tool• Designed for both left and right side brake star wheels on rear wheel

drum brakes

PART No. 70043

Brake Shoe Retaining Clip Spring Tool• Suits all sizes of clips• Comfortable handle

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Bra

ke

Auto Service Tools

PART No. 70437

Steel Flexible Line Clamp• Completely or partially closes flexible brake, fuel, vacuum lines• All steel construction with adjustable locking collar

PART No. 70717

Small Line Clamp Twin Pack• Handy twin pack of the popular P/N 70035 line clamp• Light weight, non conductive highly visible material

PART No. 70035



PART No. 70718

Small Line Clamp Four Pack• Handy four pack of the popular P/N 70035 line clamp• Light weight, non conductive highly visible material

PART No. 70723

Small Brake Adjusting Tool• Small design for servicing brakes when access is limited

PART No. 70724

Large Brake Adjusting Tool• Designed for both left and right side brake star wheels on rear wheel

drum brakes

PART No. 70043

Brake Shoe Retaining Clip Spring Tool• Suits all sizes of clips• Comfortable handle


Page 191

Auto Service Tools


Brake

PART No. 70311

Mini Tube Cutter• Compact size for confined spaces• Replaceable alloy steel cutter wheel• Range: 1/8” (3mm) to 5/8” (16mm)• With guide rollers for a smoother more accurate cut

PART No. 70092

Imperial Double Flaring Tool• Includes 5 adaptors for 3/16” to 1/2” pipes • Produces double or single flare• Individual Adaptors Available: 70092-10 70092-11 70092-12 70092-13 70092-14

PART No. 70879

Metric Double Flaring Tool• Includes 5 adaptors for 4.75mm to 10mm pipes• Produces double or single flare• Individual Adaptors Available: 70879-10 4.75mm 70879-11 5mm 70879-12 6mm 70879-13 8mm 70879-14 10mm

PART No. 70416

Tubing Bender• Bends 3/16” (5mm), 1/4” (6mm), 5/16” (8mm) and 3/8” (10mm) diameter

tubing without kinking or flattening• Heavy duty handle and mandrel

PART No. 70925

Disc Brake Rotor Runout Gauge• Checks Disc rotor runout & ball joint wear• Dual range dial indicator 0-1”/0-25mm with .001”/.01mm graduations• Flexible arm locks into position• Self locking pliers clamps to most surfaces• Meets ANSI 89.1.10 standards• Packaged in protective case• Other uses include: checking gear backlash, valve-guide wear and camshaft wear

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Bra

ke

Auto Service Tools

PART No. 70921

0-150mm Digital Brake Disc GaugeExternal jaws used to measure disc rotor minimum thickness “RMT”. Internal jaws used to measure brake pad wear.

• Range: 0-150mm/0-6”.• Resolution: 0.01mm/0.0005”.• 4 keys: mm/inch conversion, OFF/ON power, ZERO setting, HOLD function.• Large display, thumb wheel, lock screw and RS232 output.• Supplied with one spare battery, packaged in protective case.• Supplied with standard calibration rod, packaged in protective case.

PART No. 70922

0-300mm Digital Brake Drum GaugeInternal jaws used for brake drum measurement, external jaws used for setting brake shoes to drum.

• Range: 0-300mm/0-12”.• Resolution: 0.01mm/0.0005”.• 4 keys: mm/inch conversion, OFF/ON power, ZERO setting, HOLD function.• Large display, thumb wheel, lock screw and RS232 output.• Supplied with one spare battery, packaged in protective case.

PART No. 70924

7.6-33mm Disc Brake MicrometerUsed to measure disc rotor minimum thickness “RMT”

• Range: 7.6-33mm.• Graduation: 0.01mm.• Depth: 88mm.• Satin chrome finish on sleeve and thimble.• Carbide measuring spindle faces, spindle lock, ratchet stop, zero adjustment with supplied wrench.• Supplied with standard calibration rod, packaged in protective case.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Bra

ke

Auto Service Tools

PART No. 70921

0-150mm Digital Brake Disc GaugeExternal jaws used to measure disc rotor minimum thickness “RMT”. Internal jaws used to measure brake pad wear.

• Range: 0-150mm/0-6”.• Resolution: 0.01mm/0.0005”.• 4 keys: mm/inch conversion, OFF/ON power, ZERO setting, HOLD function.• Large display, thumb wheel, lock screw and RS232 output.• Supplied with one spare battery, packaged in protective case.• Supplied with standard calibration rod, packaged in protective case.

PART No. 70922

0-300mm Digital Brake Drum GaugeInternal jaws used for brake drum measurement, external jaws used for setting brake shoes to drum.

• Range: 0-300mm/0-12”.• Resolution: 0.01mm/0.0005”.• 4 keys: mm/inch conversion, OFF/ON power, ZERO setting, HOLD function.• Large display, thumb wheel, lock screw and RS232 output.• Supplied with one spare battery, packaged in protective case.

PART No. 70924

7.6-33mm Disc Brake MicrometerUsed to measure disc rotor minimum thickness “RMT”

• Range: 7.6-33mm.• Graduation: 0.01mm.• Depth: 88mm.• Satin chrome finish on sleeve and thimble.• Carbide measuring spindle faces, spindle lock, ratchet stop, zero adjustment with supplied wrench.• Supplied with standard calibration rod, packaged in protective case.


Page 193

Auto Service Tools


Drive-train &

Body

Drive-train & Body

PART No. 70622

Bearing Packer• Operated by air or hand powered grease gun• Fast & efficient operation• Durable, non-corrosive plastic cones• Suits tapered roller bearings – Max I.D. 3-15/16” (100mm) Min I.D. 29/64” (11.5mm) Max height 1-3/4” (44mm)

PART No. 70417

Gearbox Stop-Off Tool• Prevents oil loss when drive shaft is removed• Tapered design suits most vehicles

PART No. 70058

Universal Clutch Aligning Tool• Unique design aligns and assembles clutch on the workbench for easy installation• Ideal for late-model front wheel drives that have no pilot bearing in flywheel• Suits most vehicles up to 5 tons with single plate clutches

PART No. 70573

Bridge Type Pilot Bearing Puller• Suits most flywheel, transmission, alternator pilot bearings & bushes• Includes jaw set, I.D. capacity: Standard: 31/64” (12mm) to 1-7/64”

(28mm)

PART No. 70841

Pilot Bearing Puller• Suits most flywheel, transmission and alternator pilot bearings and

bushes• Jaws to suit ID capacities 1/2” (13mm) to 1-1/2” (38mm)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Dri

ve-t

rain

& B

ody

Auto Service Tools

PART No. 70711

Coil Spring Compressor• Safely compresses coil springs• Works on and off the vehicle• Heavy duty design with safety retaining hooks

Note: Thread must be lubricated before use

PART No. 70842

Cv Joint Banding Tool With Cutter• Enables quick, easy & correct installation of band-type CV boot clamps• Allows for correct tensioning of CV boot clamps• Built-in band cutter

“Cold formed” claws; slim for access but strong for safety

“Floating” upper claw forces centre shaft down – ideal for use “on-vehicle”

PART No. 70164

Lock Ring Pliers• Wide flat jaws designed for easy removal of lock rings on transmissions,

differentials, shafts etc.• Spring return handles

PART No. 70438

Coil Spring Compressor• Operates through centre of spring, while on the vehicle• Compresses curved or straight springs• Ideal for heavy duty applications


PART No. 70070

Coil Spring Compressor• Heavy duty double-claw design

Note: Not designed for use with impact guns. Thread must be lubricatedbefore use

PART No. 70689

Lock Ring Pliers• For removing / installing H/D lock rings commonly used in transmissions• Knurled jaws prevent slipping

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Dri

ve-t

rain

& B

ody

Auto Service Tools

PART No. 70711

Coil Spring Compressor• Safely compresses coil springs• Works on and off the vehicle• Heavy duty design with safety retaining hooks


PART No. 70842

Cv Joint Banding Tool With Cutter• Enables quick, easy & correct installation of band-type CV boot clamps• Allows for correct tensioning of CV boot clamps• Built-in band cutter

“Cold formed” claws; slim for access but strong for safety

“Floating” upper claw forces centre shaft down – ideal for use “on-vehicle”

PART No. 70164

Lock Ring Pliers• Wide flat jaws designed for easy removal of lock rings on transmissions,

differentials, shafts etc.• Spring return handles

PART No. 70438

Coil Spring Compressor• Operates through centre of spring, while on the vehicle• Compresses curved or straight springs• Ideal for heavy duty applications


PART No. 70070

Coil Spring Compressor• Heavy duty double-claw design

Note: Not designed for use with impact guns. Thread must be lubricatedbefore use

PART No. 70689

Lock Ring Pliers• For removing / installing H/D lock rings commonly used in transmissions• Knurled jaws prevent slipping


Page 195

Auto Service Tools


Drive-train &

Body

Honda early Honda late Toyota GM Ford, Toyota Saab, Renault

PART No. 70752

8 Way Slide Hammer Kit• For easy removal of bearings, oil seals, bushings, flange-type axles & other pressed fit parts• 8 Functions include:• 2 + 3 jaw yokes with internal & external pulling capabilities• Flange-type axle puller attachment• Dent/Lip puller hook attachment• Self tapping screw attachment• 5/8” UNC threaded attachment

PART No. 70407

Universal Hub Separator• Extremely versatile – adaptors provided to suit most popular

domestic and imported front wheel drive vehicles• Uses “Acme” threads for both forcing and adjusting screws – approx 30% more efficient than conventional threads• Yoke attaches to hubs/struts with bolts, not straps – highly secure

Detailed brochure availableSupplied in Blow Moulded Case

PART No. 70834

25 Piece Hydraulic Puller SetFor all heavy automotive and industrial pulling requirementsKit includes: - 10 ton hydraulic ram - 4” (100mm), 6” (150mm) & 8”(200mm) pulling legs - Bearing seperator (105mm) - 2 & 3 jaw yoke assemblys and cross beam - Extension rods - Centering adaptorsStored in blow moulded case

PART No. 70834-RReplacement Ram

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Dri

ve-t

rain

& B

ody

Auto Service Tools

PART No. 70742

Gear Puller• Ideal for pulling timing gears, fan pulleys, camshaft gears and all gears

that have two tapped holes• Heavy duty design• For use with Bearing Separator

PART No. 70744

Bearing Separator• For removing gears, bearing cones, bearings and similar parts that

ordinary puller jaws will not reach• Knife edges flush on one side for easy pulling• Capacity: 3” - 4” (75 - 100mm)

PART No. 70750

2 Jaw Reversible Gear Puller• Jaws forged from Heat Treated Chrome Vanadium Steel • 6” (150mm) Max Spread• 4” (100mm) Max Reach

PART No. 70746

3 Jaw Reversible Gear Puller• Jaws forged from Heat Treated Chrome Vanadium Steel• 5” (125mm) Max Spread• 3” (75mm) Max Reach

PART No. 70748


PART No. 70747


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Dri

ve-t

rain

& B

ody

Auto Service Tools

PART No. 70742

Gear Puller• Ideal for pulling timing gears, fan pulleys, camshaft gears and all gears

that have two tapped holes• Heavy duty design• For use with Bearing Separator

PART No. 70744

Bearing Separator• For removing gears, bearing cones, bearings and similar parts that

ordinary puller jaws will not reach• Knife edges flush on one side for easy pulling• Capacity: 3” - 4” (75 - 100mm)

PART No. 70750

2 Jaw Reversible Gear Puller• Jaws forged from Heat Treated Chrome Vanadium Steel • 6” (150mm) Max Spread• 4” (100mm) Max Reach

PART No. 70746


PART No. 70748


PART No. 70747



Page 197

Auto Service Tools


Drive-train &

Body

PART No. 70031

Ball Joint Separator• Drop-forged, heat-treated steel• Built to withstand heavy use• Opening: 15/16” (24mm)• Length: 11-7/8” (302mm)

PART No. 70899

Steering Joint Tool Kit • 5 piece kit for separating tie rod ends, ball joints, pitman arms etc• Heat treated forged alloy steel separation forks sizes: 17.4mm, 23.8mm, 28.5mm• Interchangeable threaded handles for use with air hammer or metal hammer• Packaged in blow moulded case & colour sleeve

PART No. 70353

Tie Rod Spreader• Drop-forged, heat-treated steel• Built to withstand heavy use• Opening: 21/32” (16.5mm)• Length: 11-7/8” (302mm)

PART No. 71950

Hub Nut Socket• Suits most popular 4 wheel drive hub nuts - e.g. Nissan• 54mm 6 point opening• 1/2” square drive allows the use of a torque wrench

PART No. 70756

Hub Nut Socket• Suits most popular 4 wheel drive hub nuts - e.g. Toyota• 55mm 6 point opening• 1/2” square drive allows the use of a torque wrench

PART No. 70484 1-3/16” (30mm)PART No. 70485 1-17/64” (32mm)PART No. 70486 1-27/64” (36mm)

Front Wheel Drive Axle Nut Sockets• Extra-deep, single-hex impact grade for long life• All 1/2” square drive

PART No. 70849

Protecta Wheel Nut Impact Socket Set• 1/2” Square Drive 3 piece set with coloured identification sleeves: 17mm = Blue, 19mm = Yellow, 21mm = Red deep sockets• Plastic sleeves prevent damage to alloy wheels• Preset depth stop, aids in starting wheel nuts in deep recessed wheels• CARDED in blow moulded case

AVAILABLE SEPARATELY:70849-17 Protecta Impact Socket 1/2” dr 17mm70849-19 Protecta Impact Socket 1/2” dr 19mm70849-21 Protecta Impact Socket 1/2” dr 21mm70849-22 Protecta Impact Socket 1/2” dr 22mmNote: From 2009 kit will be a 4 piece kit & will include 22mm socket

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Auto Service Tools


Dri

ve-t

rain

& B

ody

Auto Service Tools

PART No. 70897

Wrack Wrench™STEERING WRACK WRENCH• Use to service inner tie rod• Suits tie rods with: Hex, Round, Flats• Universal – suits any diameter from 33mm to 41mm• Suits hex sizes from 31mm to 35.5mm

PART No. 70580

Door Hinge Pin Remover & Installer• Removes and installs roll type door hinge pins without damaging the pin• Suits PIN SIZES 5 Replacement Pins O.D I.D 5.5mm 3.5mm 6.5mm 4.5mm 7.5mm 5.5mm

PART No. 70103

Exhaust Pipe Cutter• Only 1/4 turn action needed for complete cut• Range: 3/4” (19mm) to 3” (76mm)• Large dia. cutting wheels for long life

PART No. 70971

7 Pc Panel Beating Set • 3 x Hammers: bumping, pick/finishing & shrinking styles• 4 x Dollies: utility, curved, heel & toe styles• High polished heads made from carbon alloy steel• Natural finish hickory handles• Packaged in blow moulded case

PART No. 70942

Trim And Panel Removal Kit• 6 Pc kit of pry tools designed to remove door clips, trim clips and panels,

bezels, vents etc found in vehicle interiors• Unique shape and design of each tool allows removal of most trim

fasteners• Each tool is made from Impact resistant nylon to avoid damage to interior

trims

Use to service Inner Tie Rods

With Flats

With Hex

Round

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Auto Service Tools


Dri

ve-t

rain

& B

ody

Auto Service Tools

PART No. 70897

Wrack Wrench™STEERING WRACK WRENCH• Use to service inner tie rod• Suits tie rods with: Hex, Round, Flats• Universal – suits any diameter from 33mm to 41mm• Suits hex sizes from 31mm to 35.5mm

PART No. 70580

Door Hinge Pin Remover & Installer• Removes and installs roll type door hinge pins without damaging the pin• Suits PIN SIZES 5 Replacement Pins O.D I.D 5.5mm 3.5mm 6.5mm 4.5mm 7.5mm 5.5mm

PART No. 70103

Exhaust Pipe Cutter• Only 1/4 turn action needed for complete cut• Range: 3/4” (19mm) to 3” (76mm)• Large dia. cutting wheels for long life

PART No. 70971

7 Pc Panel Beating Set • 3 x Hammers: bumping, pick/finishing & shrinking styles• 4 x Dollies: utility, curved, heel & toe styles• High polished heads made from carbon alloy steel• Natural finish hickory handles• Packaged in blow moulded case

PART No. 70942

Trim And Panel Removal Kit• 6 Pc kit of pry tools designed to remove door clips, trim clips and panels,

bezels, vents etc found in vehicle interiors• Unique shape and design of each tool allows removal of most trim

fasteners• Each tool is made from Impact resistant nylon to avoid damage to interior

trims

Use to service Inner Tie Rods

With Flats

With Hex

Round


Page 199

Auto Service Tools


Drive-train &

Body

PART No. 70833

GM Steering Wheel Puller• Specially designed for GM models or steering wheels without threaded

holes• Rotating legs allow easy location• Reach 3-1/8” (80mm)• Pulling width 1-3/4” (45mm)

PART No. 70923

0-25mm Digital Tread Depth GaugeSUITABLE FOR MEASURING TREAD DEPTH, BRAKE SHOE AND PAD WEAR• Range: 0-25mm/0-1”.• Resolution: 0.01mm/0.0005”.• 4 keys: mm/inch conversion, OFF/ON power, ZERO setting, HOLD function.• Large display. RS232 output.• Supplied with one spare battery, packaged in protective case.

PART No. 70985

4 Piece Tyre Lever Set• Designed to remove & install tyres• Heavy Duty German DIN pattern• Drop Forged from CRV alloy steel. • For hand use or with tyre fitting machines• Packaged in Nylon Denier Roll

Contents:PART No. 7098612” TYRE LEVERPART No. 7098716” TYRE LEVERPART No. 7098820” TYRE LEVERPART No. 7098924” TYRE LEVER

PART No. 70382

Steering Wheel Puller• Floating pressure point• Metric and imperial bolts

PART No. 70207

Pitman Arm Puller• Universal application• Heavy-duty design

PART No. 70991

Universal Pitman Arm Puller• Suitable for most cars and light trucks.• Fully adjustable heavy-duty jaws.• Clamp bolts lock jaws in position to ensure positive grip.• Maximum opening: 2-1/2” (65mm)• Maximum throat depth: 3-3/8” (85mm)• Length: 6” (150mm)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Page 200

Index

Part Number PagePart Number PagePart Number Page Part Number Page

10100 1010105 2410107 2510114 1610115 2610119 2010121 2810122 2910127 3010131 3110133 2710135 3410136 3310137 3610141 3710142 3710143 1210144 1810145 2210146 1410175 4710184 4710212 3210213 3510236 4712110 5012130 5012215 6412216 6412217 6412218 6412219 6412220 6412221 6412222 6412223 6412224 6412230 5012235 6412236 6412237 6412238 6412239 6412240 6412241 6412242 6412243 6412244 6412375 6412376 6412377 6412378 6412415 6412416 6412417 6412418 6412419 6412420 6412421 6412422 6412423 6412430 5012435 6412436 6412437 6412438 6412439 6412440 6412441 6412442 6412443 6412905 6212906 62

14244 7414245 7414246 7414247 7414248 7414249 7414252 5714255 7414256 7414257 7414258 7414259 7414260 7414261 7414262 7414263 7414264 7414274 5814275 5814280 7514281 7514282 7514283 7514284 7514285 7514286 7514287 7514288 7514295 7514296 7514297 7514298 7514370 5914412 5614414 5714425 7414426 7414427 7414428 7414429 7414430 7414431 7414432 7414433 7414434 7414435 7414436 7414437 7414438 7414439 7414445 7514446 7514451 5714454 7414455 7414456 7414457 7414458 7414459 7414460 7414465 5814470 7514471 7514472 7514473 7514474 7514475 7514476 7514477 7514478 7514904 7014906 7014907 70

13420 6813421 6813422 6813423 6813424 6813425 6813430 5213435 6913436 6913440 6813441 6813442 6813443 6813444 6813445 6813446 6813456 5313457 6913458 6913459 6913460 6913461 6913462 6913463 6913470 10513471 10513472 10513473 10513474 10513475 10513476 10513904 6513906 6513914 6513915 6613916 6613917 6613918 6613919 6513920 6613921 6613922 6613925 6613928 6613930 6613932 6714104 5414105 5514106 5414110 5514130 5414208 5614210 5514214 5614225 7414226 7414227 7414228 7414229 7414230 7414231 7414232 7414233 7414234 7414235 7414236 7414237 7414238 7414239 7414240 7414241 7414242 7414243 74

12907 6212908 6312909 6312910 6312914 6212919 6213105 5213106 5113107 5113110 5113200 10113205 5213215 6813216 6813217 6813218 6813219 6813220 6813221 6813222 6813223 6813224 6813225 6813226 6813227 6813228 6813229 6813230 6813231 6813232 6813235 5213240 6813241 6813242 6813243 6813244 6813245 6813246 6813247 6813248 6813249 6813270 10513271 10513272 10513273 10513274 10513275 10513276 10513277 10513278 10513279 10513280 5313281 6913282 6913283 6913284 6913285 6913286 6913287 6913288 6913289 6913375 6913376 6913377 6913378 6913379 6913380 6913400 10113415 6813416 6813417 6813418 6813419 68

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Page 200

Index


10100 1010105 2410107 2510114 1610115 2610119 2010121 2810122 2910127 3010131 3110133 2710135 3410136 3310137 3610141 3710142 3710143 1210144 1810145 2210146 1410175 4710184 4710212 3210213 3510236 4712110 5012130 5012215 6412216 6412217 6412218 6412219 6412220 6412221 6412222 6412223 6412224 6412230 5012235 6412236 6412237 6412238 6412239 6412240 6412241 6412242 6412243 6412244 6412375 6412376 6412377 6412378 6412415 6412416 6412417 6412418 6412419 6412420 6412421 6412422 6412423 6412430 5012435 6412436 6412437 6412438 6412439 6412440 6412441 6412442 6412443 6412905 6212906 62

14244 7414245 7414246 7414247 7414248 7414249 7414252 5714255 7414256 7414257 7414258 7414259 7414260 7414261 7414262 7414263 7414264 7414274 5814275 5814280 7514281 7514282 7514283 7514284 7514285 7514286 7514287 7514288 7514295 7514296 7514297 7514298 7514370 5914412 5614414 5714425 7414426 7414427 7414428 7414429 7414430 7414431 7414432 7414433 7414434 7414435 7414436 7414437 7414438 7414439 7414445 7514446 7514451 5714454 7414455 7414456 7414457 7414458 7414459 7414460 7414465 5814470 7514471 7514472 7514473 7514474 7514475 7514476 7514477 7514478 7514904 7014906 7014907 70

13420 6813421 6813422 6813423 6813424 6813425 6813430 5213435 6913436 6913440 6813441 6813442 6813443 6813444 6813445 6813446 6813456 5313457 6913458 6913459 6913460 6913461 6913462 6913463 6913470 10513471 10513472 10513473 10513474 10513475 10513476 10513904 6513906 6513914 6513915 6613916 6613917 6613918 6613919 6513920 6613921 6613922 6613925 6613928 6613930 6613932 6714104 5414105 5514106 5414110 5514130 5414208 5614210 5514214 5614225 7414226 7414227 7414228 7414229 7414230 7414231 7414232 7414233 7414234 7414235 7414236 7414237 7414238 7414239 7414240 7414241 7414242 7414243 74

12907 6212908 6312909 6312910 6312914 6212919 6213105 5213106 5113107 5113110 5113200 10113205 5213215 6813216 6813217 6813218 6813219 6813220 6813221 6813222 6813223 6813224 6813225 6813226 6813227 6813228 6813229 6813230 6813231 6813232 6813235 5213240 6813241 6813242 6813243 6813244 6813245 6813246 6813247 6813248 6813249 6813270 10513271 10513272 10513273 10513274 10513275 10513276 10513277 10513278 10513279 10513280 5313281 6913282 6913283 6913284 6913285 6913286 6913287 6913288 6913289 6913375 6913376 6913377 6913378 6913379 6913380 6913400 10113415 6813416 6813417 6813418 6813419 68

Page 201Page 201

Index


14916 7114917 7114918 7114919 7014920 7114921 7114922 7114925 7314930 7114931 7114932 7114933 7114935 7214937 7214941 7214945 7214946 7214947 7214948 7214949 7115106 6015205 6015405 6015715 7815717 7815718 7815720 7815722 7815723 7815725 7815726 7815727 7815728 7815729 7815730 7815800 7815801 7815802 7815803 7815804 7815805 7815806 7815807 7815808 7815809 7815810 7815811 7815812 7815813 7815814 7815815 7815816 7815817 7815818 7815950 7615951 7615952 7615953 7615954 7615955 7615956 7615957 7719105 4819107 4819130 4919135 4919155 6719156 7319157 6719158 7719159 7319160 7719230 48

22421 10222422 10222423 10222424 10222425 10222426 10222427 10222428 10222429 10222430 10222431 10222432 10222433 10222434 10222435 10222436 10222437 10222438 10222439 10222440 10222462 10322463 10322464 10322465 10322466 10322467 10322468 10322469 10322470 10322471 10322472 10322473 10322474 10322475 10325105 10825110 10825111 10825112 10825113 10825114 10825115 10825116 10825205 10825206 10825207 10825208 10825209 10825210 10825211 10826103 13926104 13926105 13926106 13926107 13926108 13926109 14026110 14026111 14026112 14026113 14126114 14126115 14126116 14126117 14126118 14126119 14126912 14326913 14326914 14326915 14326916 14326917 14326920 142

21706 10521707 10521708 10522104 9322105 9322202 9622203 9622204 9622208 9422209 9522210 9322215 10222216 10222217 10222218 10222219 10222220 10222221 10222222 10222223 10222224 10222225 10222226 10222227 10222228 10222229 10222230 10222231 10222232 10222233 10222236 10222239 10222240 10222241 10222242 10222243 10222244 10222265 10322266 10322267 10322268 10322269 10322270 10322271 10322272 10322273 10322274 10322275 10322276 10322277 10322278 10322279 10322280 10322281 10322282 10322283 10322284 10322285 10322286 10322287 10322288 10322289 10322402 9722403 9722408 9422410 9422413 9522415 10222416 10222417 10222418 10222419 10222420 102

20211 10020213 10020411 10020412 10020700 10520701 10520702 10520703 10520704 10520705 10520706 10520707 10520708 10520709 10520710 10520800 10520801 10520802 10520803 10520804 10520805 10520807 10520808 10520809 10520810 10521100 9821202 9921206 9921211 9821257 10121272 10421273 10421300 10421301 10421302 10421303 10421304 10421305 10421306 10421307 10421308 10421309 10421310 10421321 10421322 10421323 10421324 10421325 10421326 10421412 9921413 9821459 10121469 10421470 10421471 10421500 10421501 10421502 10421503 10421504 10421505 10421506 10421507 10421508 10421509 10421510 10421511 10421700 10521701 10521702 10521703 10521704 10521705 105

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Page 202

Index


26921 14226922 14226923 14227104 13027105 13027110 13527111 13527112 13527113 13527114 13527115 13527116 13527117 13527118 13527130 13027135 13527136 13527137 13527138 13527139 13527155 13127160 13527161 13527162 13527163 13527164 13527165 13527173 13327174 13327175 13527176 13527177 13527178 13527179 13527180 13527181 13527182 13527184 13527185 13527186 13527190 13127195 13527196 13527197 13527198 13527199 13527200 13527201 13527205 13227209 13127210 13527211 13527212 13527213 13527214 13527215 13527216 13527217 13527235 13027241 13027303 13427305 13427320 12927321 12927330 13527331 13527332 13527333 13527334 13527433 13627434 13627435 13627436 136

70010 18770013 18870016 18870018 18870031 19770035 15870035 19070043 19070058 19370070 19470079 15870081 15970083 15970085 15970086 15870090 16270092 19170103 19870107 16070109 16070111 16070113 16070115 16070117 16070119 15970123 17970125 17870127 17870128 17870133 17770134 17770135 17770136 17770138 18970139 18970140 18970141 18970145 18970148 18970150 17770151 17770152 17770156 18370164 19470166 11970168 11970170 11970172 11970174 11970176 12070178 11870180 11870184 11870186 11870188 11870190 11870207 19970209 17770211 17770213 12870214 18870218 17470220 17470221 17670222 17570223 17570223 17670224 17570224 17670225 17570225 17670226 17670227 176

29518 11429519 11429520 11429521 11429530 11329540 11329550 11429560 11444105 6744107 7344112 6344113 6744114 7344116 7744165 6744166 7344167 7344168 7744208 7347790 12447791 12447792 12447793 12447794 12447795 12450200 4050203 4150204 4250207 4250208 4050209 4050215 4250216 4150218 3950224 3950233 4150300 4550301 4550302 4550303 4550304 4550305 4550306 4550307 4550308 4550309 4550310 4650311 4650312 4650313 4650314 4650316 4650317 4650318 4650319 4650320 4650321 4650322 4650323 4650324 4650325 4550327 4550328 4550330 4350331 4350332 4650333 4651108 4451130 4451251 4451252 4456010 11856090 118

27436 13628106 12428107 12428108 12428118 12428210 12428211 12428212 12428215 12428225 12528226 12528227 12528232 12528240 12528241 12528242 12528305 12528306 12528310 12528311 12528312 12528350 12528353 12528403 12628404 12628405 12428406 12628407 12628408 12628409 12628410 12628411 12628412 12728413 12728415 12628416 12628417 12728418 12728419 12728465 12429102 11129179 11129180 11129181 11129182 11129183 11129184 11129187 11129188 11129189 11129190 11129191 11129192 11129193 11129194 11129195 11129300 11229501 11429502 11429503 11429504 11429505 11429506 11429507 11429508 11429509 11429511 11429512 11429513 11429514 11429515 11429516 11429517 114

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Page 202

Index


26921 14226922 14226923 14227104 13027105 13027110 13527111 13527112 13527113 13527114 13527115 13527116 13527117 13527118 13527130 13027135 13527136 13527137 13527138 13527139 13527155 13127160 13527161 13527162 13527163 13527164 13527165 13527173 13327174 13327175 13527176 13527177 13527178 13527179 13527180 13527181 13527182 13527184 13527185 13527186 13527190 13127195 13527196 13527197 13527198 13527199 13527200 13527201 13527205 13227209 13127210 13527211 13527212 13527213 13527214 13527215 13527216 13527217 13527235 13027241 13027303 13427305 13427320 12927321 12927330 13527331 13527332 13527333 13527334 13527433 13627434 13627435 13627436 136

70010 18770013 18870016 18870018 18870031 19770035 15870035 19070043 19070058 19370070 19470079 15870081 15970083 15970085 15970086 15870090 16270092 19170103 19870107 16070109 16070111 16070113 16070115 16070117 16070119 15970123 17970125 17870127 17870128 17870133 17770134 17770135 17770136 17770138 18970139 18970140 18970141 18970145 18970148 18970150 17770151 17770152 17770156 18370164 19470166 11970168 11970170 11970172 11970174 11970176 12070178 11870180 11870184 11870186 11870188 11870190 11870207 19970209 17770211 17770213 12870214 18870218 17470220 17470221 17670222 17570223 17570223 17670224 17570224 17670225 17570225 17670226 17670227 176

29518 11429519 11429520 11429521 11429530 11329540 11329550 11429560 11444105 6744107 7344112 6344113 6744114 7344116 7744165 6744166 7344167 7344168 7744208 7347790 12447791 12447792 12447793 12447794 12447795 12450200 4050203 4150204 4250207 4250208 4050209 4050215 4250216 4150218 3950224 3950233 4150300 4550301 4550302 4550303 4550304 4550305 4550306 4550307 4550308 4550309 4550310 4650311 4650312 4650313 4650314 4650316 4650317 4650318 4650319 4650320 4650321 4650322 4650323 4650324 4650325 4550327 4550328 4550330 4350331 4350332 4650333 4651108 4451130 4451251 4451252 4456010 11856090 118

27436 13628106 12428107 12428108 12428118 12428210 12428211 12428212 12428215 12428225 12528226 12528227 12528232 12528240 12528241 12528242 12528305 12528306 12528310 12528311 12528312 12528350 12528353 12528403 12628404 12628405 12428406 12628407 12628408 12628409 12628410 12628411 12628412 12728413 12728415 12628416 12628417 12728418 12728419 12728465 12429102 11129179 11129180 11129181 11129182 11129183 11129184 11129187 11129188 11129189 11129190 11129191 11129192 11129193 11129194 11129195 11129300 11229501 11429502 11429503 11429504 11429505 11429506 11429507 11429508 11429509 11429511 11429512 11429513 11429514 11429515 11429516 11429517 114

Page 203Page 203

Index


70228 17670229 17670230 17670231 17670232 17670233 17670237 12070245 17870257 11370260 11770262 11770265 11770267 17870269 18470270 18270272 6370274 6770276 7370288 4970307 11570309 11570310 11670311 19170313 11670316 11670320 11670324 11670328 11670333 17970336 11670351 18070353 19770359 18070360 18070361 18070362 18070364 18170374 15770382 18370382 19970385 17970402 12170407 19570412 18070414 16170415 17870416 19170417 19370421 18270426 16270431 17370436 15870437 19070438 19470440 16370442 16370443 16470445 16370448 18070449 12270450 12270451 12870452 12870453 16170457 12070469 18070470 16270474 18570476 11970480 12870481 12870483 16170484 197

70920 12270921 19270922 19270923 19970924 19270925 19170930 11670934 15370938 16670940 15270942 19870971 19870973 11770975 15970980 16970981 17270985 19970986 19970987 19970988 19970989 19970990 18470991 19970992 18470993 16471405 16574118 15679150 19780000 15780000 18880500 18781100 15581100 18781500 15550316-A 4650318-A 4650319-A 4650322-A 4650332-A 4670218-4 17470220-4 17470222-4 17570617-10 15670709-10 7370849-17 19770849-19 19770849-21 19770849-22 197CM1200T 152Double Zero145 182FLT10005S 90FLT10008S 90FLT10010S 90FLT10015S 90FLT10020S 90FLT10032S 90FLT10034S 90FLT18708S 90FLT18710S 90J2100 137J2116 137J2120 137J2124 137J2125 137J2126 137J2130 137J46 129J4749 62J47A 132J48007 132J4900A 53J4900MA 53J5257A 66

70742 19670744 19670745 18370746 19670747 19670748 19670750 19670752 19570756 19770767 18970768 16670768 16770769 16670769 16770770 16670770 16770795 16470799 18370800 16670801 16970801 18570803 18270805 17970806 12870807 12070808 12070813 15870814 15770816 17370818 17270819 15270824 17070826 18870827 16570829 17870831 17970833 19970834 19570838 16270839 16170841 19370842 19470843 15870843 16570846 16270847 18970849 19770850 18670856 18670858 18770862 16470864 16470865 18370879 19170880 16870885 11570886 15470887 15570888 16770890 17270890 17270890 18670895 18770896 18170897 19870898 16570899 19770912 17270915 18170917 15370918 15470918 16870919 153

70485 19770486 19770491 16970492 16270497 17670498 17570498 17670499 17670500 17670501 17570501 17670502 17670503 17670504 17670505 17670506 17670507 17670508 17670509 17670511 18170526 9770532 9770533 17070536 16170538 17470540 12070543 12870549 16370552 11370553 12270554 12270570 16970573 19370576 17570580 19870584 17970586 16970597 17070598 11270609 18470610 13670617 15370618 15470618 16870622 19370667 18870668 16170672 18570673 11770675 11270675 17070676 11270676 17070679 17070681 15970684 17070689 19470711 19470713 17170715 18170716 17370717 19070718 19070720 18570721 18570723 19070724 19070726 16470730 17170735 18270736 16570737 15670741 184

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Page 204

Index


J5429 65J5450 70J5457A 70J5469 71J712S0 107J801 109J812HD 109J814HD 109J818HD 109J824HD 109J86B 134J86C 134J9500A 121J9500B 121JC471 109JC472 109JC474 109JC474A 109JC474B 109JC482 109JC483 109JC484 109JC907 107JC908 107JC908A 107JC912 107JHD032M 106JHD036M 106JHD041M 106JHD046M 106JHD050M 106JHD055M 106JHD060M 106JHD065M 106JHD070M 106JHD075M 106JHD080M 106JHD085M 106JHD090M 106JHD095M 106JHD100M 106JHD105M 106JHD110M 106JHD115M 106JRR07523 90JRR07526 90JRR10028 90JRR10032 90JRR10034 90JRR10036 90JRR10040 90JRR15046 90JRR15054 90JRR15062 90JRR15070 90JUSN321 106JUSN323 106JUSN326 106JUSN327 106JUSN329 106JUSN330 106JUSN332 106JUSN335 106JUSN338 106JUSN340 106JUSN341 106JUSN342 106JUSN344 106JUSN347 106JUSN348 106JUSN350 106JUSN354 106JUSN356 106

X12UJB 87X12X-125 87X12X-250 87X12X-500 87X20100 88X20100M 88X20104 88X20105M 88X20108 88X20110M 88X20112 88X20115M 88X20116 88X20120 88X20120M 88X20124 88X20125M 88X20128 88X20130M 88X20132 88X20135M 88X20136 88X20140 88X20140M 88X20144 88X20145M 88X20148 88X20150M 88X20152 88X20155M 88X20156 88X20160 88X20160M 88X20164 88X20165M 88X20168 88X20170M 88X20172 88X20176 88X20180 88X20184 88X20188 88X20192 88X20196 88X20200 88X20204 88X20208 88X20212 88X20216 88X20220 88X20224 88X2075M 88X2077M 88X2080M 88X2085M 88X2090M 88X2095M 88X2096 88X20UJB 88X20X-125 88X20X-250 88X20X-500 88X307M 80X307ML 80X308M 80X308ML 80X309M 80X309ML 80X310 80X310L 80X310M 80X310ML 80X311M 80

X1246M 87X1246ML 87X1248 87X1250 87X1250M 87X1250ML 87X1252 87X1252L 87X1254 87X1254L 87X1254M 87X1254ML 87X1255M 87X1255ML 87X1256 87X1256L 87X1258 87X1258L 87X1260 87X1260L 87X1260M 87X1260ML 87X1262 87X1262L 87X1263M 87X1263ML 87X1264 87X1264L 87X1265M 87X1265ML 87X1266 87X1266L 87X1268 87X1268L 87X1270 87X1270L 87X1270M 87X1270ML 87X1272 87X1272L 87X1274 87X1274L 87X1275M 87X1275ML 87X1276 87X1276L 87X1277M 87X1277ML 87X1278 87X1278L 87X1280 87X1280L 87X1280M 87X1280ML 87X1282 87X1284 87X1284L 87X1285M 87X1285ML 87X1286 87X1286L 87X1288 87X1288L 87X1290 87X1290L 87X1290M 87X1292 87X1292L 87X1294 87X1294L 87X1295M 87X1296 87X1298 87

JUSN360 106JUSN362 106JUSN366 106JUSN368 106JUSN372 106RG280 107RG315 107RH1012 107RH1417 107RH1824 107RH1921 107RH1924 107RH1924S 107RH2124S 107RH2427 107RH2430 107RH2732 107RH3036 107RH3236 107RH3641 107SA-1000 149SA-1100 149SA-1200 149SA-500 148SA-500E 148SA-600 148SA-ADG 146SA-AH 146SA-DG 146SA-R06 146SA-R12 145SA-R38 145SA-RW12 147SA-RW38 147SA-RW38H 147SA-RW38S 147SA-RW38SHA 147SATO-250 145X12100 87X12100M 87X12102 87X12104 87X12105M 87X12106 87X12108 87X12110 87X12110M 87X12112 87X12114 87X12115M 87X12116 87X12118 87X12120 87X12120M 87X12120ML 87X12128 87X12130 87X12132 87X12134 87X12136 87X12138 87X12140 87X12142 87X12144 87X12148 87X12152 87X1236M 87X1238M 87X1241M 87X1241ML 87X1242M 87X1242ML 87X1246 87

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Page 204

Index


J5429 65J5450 70J5457A 70J5469 71J712S0 107J801 109J812HD 109J814HD 109J818HD 109J824HD 109J86B 134J86C 134J9500A 121J9500B 121JC471 109JC472 109JC474 109JC474A 109JC474B 109JC482 109JC483 109JC484 109JC907 107JC908 107JC908A 107JC912 107JHD032M 106JHD036M 106JHD041M 106JHD046M 106JHD050M 106JHD055M 106JHD060M 106JHD065M 106JHD070M 106JHD075M 106JHD080M 106JHD085M 106JHD090M 106JHD095M 106JHD100M 106JHD105M 106JHD110M 106JHD115M 106JRR07523 90JRR07526 90JRR10028 90JRR10032 90JRR10034 90JRR10036 90JRR10040 90JRR15046 90JRR15054 90JRR15062 90JRR15070 90JUSN321 106JUSN323 106JUSN326 106JUSN327 106JUSN329 106JUSN330 106JUSN332 106JUSN335 106JUSN338 106JUSN340 106JUSN341 106JUSN342 106JUSN344 106JUSN347 106JUSN348 106JUSN350 106JUSN354 106JUSN356 106

X12UJB 87X12X-125 87X12X-250 87X12X-500 87X20100 88X20100M 88X20104 88X20105M 88X20108 88X20110M 88X20112 88X20115M 88X20116 88X20120 88X20120M 88X20124 88X20125M 88X20128 88X20130M 88X20132 88X20135M 88X20136 88X20140 88X20140M 88X20144 88X20145M 88X20148 88X20150M 88X20152 88X20155M 88X20156 88X20160 88X20160M 88X20164 88X20165M 88X20168 88X20170M 88X20172 88X20176 88X20180 88X20184 88X20188 88X20192 88X20196 88X20200 88X20204 88X20208 88X20212 88X20216 88X20220 88X20224 88X2075M 88X2077M 88X2080M 88X2085M 88X2090M 88X2095M 88X2096 88X20UJB 88X20X-125 88X20X-250 88X20X-500 88X307M 80X307ML 80X308M 80X308ML 80X309M 80X309ML 80X310 80X310L 80X310M 80X310ML 80X311M 80

X1246M 87X1246ML 87X1248 87X1250 87X1250M 87X1250ML 87X1252 87X1252L 87X1254 87X1254L 87X1254M 87X1254ML 87X1255M 87X1255ML 87X1256 87X1256L 87X1258 87X1258L 87X1260 87X1260L 87X1260M 87X1260ML 87X1262 87X1262L 87X1263M 87X1263ML 87X1264 87X1264L 87X1265M 87X1265ML 87X1266 87X1266L 87X1268 87X1268L 87X1270 87X1270L 87X1270M 87X1270ML 87X1272 87X1272L 87X1274 87X1274L 87X1275M 87X1275ML 87X1276 87X1276L 87X1277M 87X1277ML 87X1278 87X1278L 87X1280 87X1280L 87X1280M 87X1280ML 87X1282 87X1284 87X1284L 87X1285M 87X1285ML 87X1286 87X1286L 87X1288 87X1288L 87X1290 87X1290L 87X1290M 87X1292 87X1292L 87X1294 87X1294L 87X1295M 87X1296 87X1298 87

JUSN360 106JUSN362 106JUSN366 106JUSN368 106JUSN372 106RG280 107RG315 107RH1012 107RH1417 107RH1824 107RH1921 107RH1924 107RH1924S 107RH2124S 107RH2427 107RH2430 107RH2732 107RH3036 107RH3236 107RH3641 107SA-1000 149SA-1100 149SA-1200 149SA-500 148SA-500E 148SA-600 148SA-ADG 146SA-AH 146SA-DG 146SA-R06 146SA-R12 145SA-R38 145SA-RW12 147SA-RW38 147SA-RW38H 147SA-RW38S 147SA-RW38SHA 147SATO-250 145X12100 87X12100M 87X12102 87X12104 87X12105M 87X12106 87X12108 87X12110 87X12110M 87X12112 87X12114 87X12115M 87X12116 87X12118 87X12120 87X12120M 87X12120ML 87X12128 87X12130 87X12132 87X12134 87X12136 87X12138 87X12140 87X12142 87X12144 87X12148 87X12152 87X1236M 87X1238M 87X1241M 87X1241ML 87X1242M 87X1242ML 87X1246 87

Page 205Page 205

Index


X311ML 80X312 80X312L 80X312M 80X312ML 80X313M 80X313ML 80X314 80X314L 80X314M 80X314ML 80X315M 80X315ML 80X316 80X316L 80X316M 80X316ML 80X317M 80X317ML 80X318 80X318L 80X318ML 80X319M 80X319ML 80X320 80X320L 80X320M 80X320ML 80X321M 80X321ML 80X322 80X322L 80X322M 80X322ML 80X324 80X324L 80X326 80X328 80X3H04M 80X3H05M 80X3H06M 80X3H08M 80X3H10M 80X3X-125 80X3X-75 80X4-1921ML 82X4-2426L 82X408M 81X410 81X410M 81X410ML 81X411M 81X411ML 81X412 81X412D 82X412L 81X412M 81X412MD 82X412ML 81X413M 81X413MD 82X413ML 81X414 81X414D 82X414L 81X414M 81X414MD 82X414ML 81X415M 81X415MD 82X415ML 81X416 81X416D 82

X627MD 83X627ML 83X628 83X628L 83X628M 83X628ML 83X629M 83X629ML 83X630 83X630L 83X630M 83X630MD 83X630ML 83X631M 83X631ML 83X632 83X632L 83X632M 83X632MD 83X632ML 83X633M 83X633ML 83X634 83X634L 83X634M 83X634ML 83X635M 83X635ML 83X636 83X636L 83X636M 83X636MD 83X636ML 83X637M 83X637ML 83X638 83X638L 83X638M 83X638MD 83X638ML 83X640 83X640L 83X640M 83X641M 83X641MD 83X641ML 83X642 83X642L 83X642M 83X642ML 83X644 83X644L 83X646 83X646L 83X646M 83X646ML 83X648 83X648L 83X648M 83X650 83X650L 83X650M 83X650ML 83X652 83X652L 83X652M 83X652ML 83X654 83X654L 83X654M 83X655M 83X655ML 83X656 83

X440 81X440D 82X440L 81X442 81X442D 82X442L 81X444 81X444D 82X444L 81X446 81X446D 82X446L 81X448 81X448D 82X448L 81X4808 82X4809 82X4810 82X4H04M 82X4H05M 82X4H06 82X4H06M 82X4H07 82X4H07M 82X4H08M 82X4H09M 82X4H10M 82X4H12 82X4H12M 82X4H14 82X4H14M 82X4H16 82X4H17M 82X4H18 82X4H19M 82X4H20 82X4H22 82X4H24 82X4UJB 82X4X-125 82X4X-250 82X4X-460 82X4X-610 82X4X-75 82X616 83X617M 83X617ML 83X618 83X618M 83X618ML 83X619M 83X619MD 83X619ML 83X620 83X620L 83X620M 83X621M 83X621ML 83X622 83X622M 83X622ML 83X623M 83X623ML 83X624 83X624L 83X624M 83X624MD 83X624ML 83X625M 83X625ML 83X626L 83X626M 83X627M 83

X416L 81X416M 81X416MD 82X416ML 81X417M 81X417MD 82X417ML 81X418 81X418D 82X418L 81X418M 81X418MD 82X418ML 81X419M 81X419MD 82X419ML 81X420 81X420D 82X420L 81X420M 81X420ML 81X421M 81X421MD 82X421ML 81X422 81X422D 82X422L 81X422ML 81X423M 81X423ML 81X424 81X424D 82X424L 81X424M 81X424MD 82X424ML 81X425M 81X425ML 81X426 81X426D 82X426L 81X426M 81X426ML 81X427M 81X427ML 81X428 81X428D 82X428L 81X428M 81X428ML 81X429M 81X429ML 81X430 81X430D 82X430L 81X430M 81X430ML 81X432 81X432D 82X432L 81X432M 81X432ML 81X433M 81X434 81X434D 82X434L 81X436D 82X436L 81X436M 81X436ML 81X438 81X438D 82X438L 81

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Page 206

Index


X656L 83X656M 83X658 83X658L 83X660 83X660L 83X660M 83X660ML 83X662 83X662L 83X663M 83X664 83X664L 83X665M 83X665ML 83X666 83X666L 83X667M 83X668 83X668L 83X670 83X672 83X674 83X676 83X678 83X680 83X6B1735 84X6B17M 84X6B19M 84X6B20M 84X6B2141M 84X6B21M 84X6H10M 84X6H12M 84X6H14M 84X6H16 84X6H17M 84X6H18 84X6H19M 84X6H20 84X6H22M 84X6H24 84X6H24M 84X6H27M 84X6H28 84X6H32 84X6UJB 84X6X-100 84X6X-175 84X6X-250 84X6X-330 84X8100 85X8100L 85X8100M 85X8100ML 85X8104 85X8104L 85X8105M 85X8105ML 85X8108 85X8108L 85X8110M 85X8110ML 85X8112 85X8112L 85X8115M 85X8115ML 85X8116 85X8116L 85X8120 85X8120L 85X8124 85X8124L 85

X884 85X884L 85X885M 85X885ML 85X886 85X886L 85X888 85X888L 85X890 85X890L 85X890M 85X890ML 85X892 85X892L 85X894 85X894L 85X895M 85X895ML 85X896 85X896L 85X8H14M 86X8H17M 86X8H19M 86X8H20 86X8H22M 86X8H24 86X8H24M 86X8H27M 86X8H28 86X8H30M 86X8H32 86X8H32M 86X8UJB 86X8X-175 86X8X-250 86X8X-330 86X8X-400 86XAD12-8 86XAD20-12 88XAD3-4 80XAD4-3 82XAD4-6 82XAD6-4 84XAD6-8 84XAD8-12 86XAD8-6 86XS410LT 59XS410MLT 59XS410MT 59XS410T 59XS418M 59XS608 61XS608L 61XS608M 61XS608ML 61

X842ML 85X843M 85X844 85X844L 85X844M 85X845M 85X845ML 85X846 85X846L 85X846M 85X846ML 85X847M 85X848 85X848M 85X848ML 85X850 85X850L 85X850M 85X850ML 85X852 85X852L 85X852M 85X852ML 85X853M 85X854 85X854L 85X854M 85X854ML 85X855M 85X855ML 85X856 85X856L 85X856M 85X857M 85X858 85X858L 85X858M 85X858ML 85X860 85X860L 85X860M 85X860ML 85X862 85X862L 85X863M 85X863ML 85X864 85X864L 85X865M 85X865ML 85X866 85X866L 85X868 85X868L 85X870 85X870L 85X870M 85X870ML 85X872 85X872L 85X874 85X874L 85X875M 85X875ML 85X876 85X876L 85X878 85X880 85X880L 85X880M 85X880ML 85X882 85X882L 85

X8128 85X8128L 85X8132 85X8132L 85X8136 85X8136L 85X8144 85X8144L 85X819M 85X820M 85X820ML 85X821M 85X821ML 85X822 85X822L 85X822M 85X822ML 85X823M 85X823ML 85X824 85X824L 85X824M 85X824ML 85X825M 85X826 85X826L 85X826M 85X826ML 85X827M 85X827ML 85X828 85X828L 85X828M 85X828ML 85X829M 85X829ML 85X830 85X830L 85X830M 85X830ML 85X831M 85X832 85X832L 85X832M 85X832ML 85X832ML 85X833M 85X833ML 85X834 85X834L 85X834M 85X834ML 85X835M 85X835ML 85X836 85X836L 85X836M 85X836ML 85X837M 85X837ML 85X838 85X838L 85X838M 85X838ML 85X839M 85X840 85X840L 85X840M 85X841M 85X841ML 85X842 85X842L 85X842M 85

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Page 206

Index


X656L 83X656M 83X658 83X658L 83X660 83X660L 83X660M 83X660ML 83X662 83X662L 83X663M 83X664 83X664L 83X665M 83X665ML 83X666 83X666L 83X667M 83X668 83X668L 83X670 83X672 83X674 83X676 83X678 83X680 83X6B1735 84X6B17M 84X6B19M 84X6B20M 84X6B2141M 84X6B21M 84X6H10M 84X6H12M 84X6H14M 84X6H16 84X6H17M 84X6H18 84X6H19M 84X6H20 84X6H22M 84X6H24 84X6H24M 84X6H27M 84X6H28 84X6H32 84X6UJB 84X6X-100 84X6X-175 84X6X-250 84X6X-330 84X8100 85X8100L 85X8100M 85X8100ML 85X8104 85X8104L 85X8105M 85X8105ML 85X8108 85X8108L 85X8110M 85X8110ML 85X8112 85X8112L 85X8115M 85X8115ML 85X8116 85X8116L 85X8120 85X8120L 85X8124 85X8124L 85

X884 85X884L 85X885M 85X885ML 85X886 85X886L 85X888 85X888L 85X890 85X890L 85X890M 85X890ML 85X892 85X892L 85X894 85X894L 85X895M 85X895ML 85X896 85X896L 85X8H14M 86X8H17M 86X8H19M 86X8H20 86X8H22M 86X8H24 86X8H24M 86X8H27M 86X8H28 86X8H30M 86X8H32 86X8H32M 86X8UJB 86X8X-175 86X8X-250 86X8X-330 86X8X-400 86XAD12-8 86XAD20-12 88XAD3-4 80XAD4-3 82XAD4-6 82XAD6-4 84XAD6-8 84XAD8-12 86XAD8-6 86XS410LT 59XS410MLT 59XS410MT 59XS410T 59XS418M 59XS608 61XS608L 61XS608M 61XS608ML 61

X842ML 85X843M 85X844 85X844L 85X844M 85X845M 85X845ML 85X846 85X846L 85X846M 85X846ML 85X847M 85X848 85X848M 85X848ML 85X850 85X850L 85X850M 85X850ML 85X852 85X852L 85X852M 85X852ML 85X853M 85X854 85X854L 85X854M 85X854ML 85X855M 85X855ML 85X856 85X856L 85X856M 85X857M 85X858 85X858L 85X858M 85X858ML 85X860 85X860L 85X860M 85X860ML 85X862 85X862L 85X863M 85X863ML 85X864 85X864L 85X865M 85X865ML 85X866 85X866L 85X868 85X868L 85X870 85X870L 85X870M 85X870ML 85X872 85X872L 85X874 85X874L 85X875M 85X875ML 85X876 85X876L 85X878 85X880 85X880L 85X880M 85X880ML 85X882 85X882L 85

X8128 85X8128L 85X8132 85X8132L 85X8136 85X8136L 85X8144 85X8144L 85X819M 85X820M 85X820ML 85X821M 85X821ML 85X822 85X822L 85X822M 85X822ML 85X823M 85X823ML 85X824 85X824L 85X824M 85X824ML 85X825M 85X826 85X826L 85X826M 85X826ML 85X827M 85X827ML 85X828 85X828L 85X828M 85X828ML 85X829M 85X829ML 85X830 85X830L 85X830M 85X830ML 85X831M 85X832 85X832L 85X832M 85X832ML 85X832ML 85X833M 85X833ML 85X834 85X834L 85X834M 85X834ML 85X835M 85X835ML 85X836 85X836L 85X836M 85X836ML 85X837M 85X837ML 85X838 85X838L 85X838M 85X838ML 85X839M 85X840 85X840L 85X840M 85X841M 85X841ML 85X842 85X842L 85X842M 85


Sales Fax: 1800 080 898



Sales Fax: 0800 2 782 653








Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Ca

talo

gu

e

WARNING: Work Safely With Tools Wear Safety Goggles.©2008 THE STANLEY WORKS: Stanley Australia, 82 Taryn Drive, Epping, Victoria 3076.

Stanley Australia National Customer Service Centre: 1800 338 002 Fax: 1800 080 898Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

www.sidchrome.com.auwww.sidchrome.com.au

Industrial & Mechanical

Tool Catalogue

Date post:	22-Mar-2016
Category:	Documents
Upload:	cl-tool-centre-pty-ltd
View:	415 times
Download:	48 times

Sidchrome ABW Catalogue

Documents