SISO Glass Fittings

- high quality furniture fi ttings

S I S O

f i t t i ngs

GLASS

DISTRIBUTOR


SISIO A/SMILEPARKEN 11DK - 2740 SKOVLUNDE(COPENHAGEN)DENMARKPHONE: (+45) 45 830 900FAX: (+45) 45 830 444

The technical descriptions and dimensions in this catalogue,also those with the photographs and drawings, are not binding.We reserve the right to make design improvements.

We bear no liability for any misprints or other errors that might occur in the production of the catalogue.

SISO A/S tager forbehold for trykfejl samt ndringer i produk-tets specifkationer.

Fr Druckfehler und Irrtmer ist jede Haftung ausgeschlossen. Produktnderungen behalten wir uns vor.


1

CONTENTS

GLASS CONNECTORS 3-5

GLASS DOOR LOCK & ACCESSORIES 6-21

SHELF SUPPORTS FOR GLASS 22-26

CABLE SIGN SYSTEM 27-28

ADJUSTABLE SHELF SUPPORT PELICANS 29-30

GLASS CLAMPS 31-37

BALUSTER POSTS 38

MAGNETIC TOUCH LATCHES 39-40

STRIKING PLATES 41

GLASS DOOR HINGES - DRILLING 42-51

BUTT HINGES FOR UV-GLUE 51-53

GLASS PIVOT HINGE - NO DRILLING 54-56

GLASS DOOR HINGES - NO DRILLING 56-58

GLASS DOOR PULL F/SLIDING DOORS 59

GLASS DOOR HANDLE - NO DRILLING 59

ACCESSORIES F/MIRRORS 60


2

CONTENTS

SIGNBOARD SCREWS & HOLDERS 61-63

ALUMINIUM SHELVES W/LED & ALU PROFILES 64

SUCTION PADS & BUMPERS 64

DISCS & LEGS F/GLASS TABLE TOPS 65

SHELVING LEG SYSTEM THE POST 66

SAUNA HINGES & ACCESSORIES FOR SAUNA DOORS 67-71

SHOWER DOOR HINGES 72-87 & 91-92

SHOWER CLAMPS 88-91

SUPPORT BARS & ACCESSORIES 93-99

SHOWER DOOR KNOBS & HANDLES 100-102

DOOR HANDLES SS-304 103-105

PVC SEALS FOR SHOWER DOORS 106-107

ALUMINIUM U-CHANNELS 107

SLIDING DOOR SYSTEM F/GLASS DOORS 108-113

SISO SAN -TOILET ACCESSORIES 114

TOILET CUBICLE FITTINGS 115-120

FLOOR SPRINGS & PATCH FITTINGS 121-135

LOCKS FOR GLASS DOORS 136-138

SOFT CLOSE GLASS DOOR HINGES 139-141


3

GLASS CONNECTOR 2-WAY90

33 x 33 x 25 mm height

Chrome plated # 22.10.100Brass plated # 22.10.101Black anodized # 22.10.102Alu finish # 22.10.103

GLASS CONNECTORS - TYPE MAXIZAMAK - GLASS THICKNESS 4-6 MM

GLASS CONNECTOR 3-WAYT-JOINT






GLASS CONNECTOR 3-WAYT-JOINT

Closed end - bottom/top connector



Closed end - bottom/top connector



4

GLASS CONNECTOR HINGE

60 mm open width x 40 mm height.

Chrome plated # 22.10.010Brass plated # 22.10.011Black anodized # 22.10.012

GLASS CONNECTORS - TYPE MINIZAMAK - GLASS THICKNESS 4 - 5.5 MM

GLASS CONNECTOR HINGE

60 mm open width x 22 mm height.

Chrome plated # 22.10.020Black anodized # 22.10.022

GLASS CONNECTOR 2-WAY - 90

33 x 33 mm x 22 mm height


GLASS CONNECTOR 3-WAY - T-JOINT



GLASS CONNECTOR 4-WAY - 90



GLASS CONNECTOR 4-WAY - 9052 x 52 mm x 22 mm heightbottom mounted conne ctor

Chrome plated # 22.10.055


5

GLASS/GLASS CONNECTOR #CLAW2-WAY

GLASS/GLASS CONNECTOR #CLAW3-WAY

ApplicationConnecting glass platesDrilling required

Material2 mm steel, nickel plated

Size: 35 x 35 mmBore hole: 6 mm Bore distance: 30 mm from centre to edge + glass thicknessGlass thickness: 4 - 8 mm

Item No.: # 22.10.090

Inclusive transparent tube & washers

30

mm

30 mm + Glass thickness

Hole 6 mm

Back Front

ApplicationConnecting glass platesDrilling required

Material2 mm steel, nickel plated

Size: 35 x 35 x 35 mmBore hole: 6 mm Bore distance: 30 mm from centre to edge + glass thicknessGlass thickness: 4 - 8 mm

Item No.: # 22.10.091

Inclusive transparent tube & washers

Back Front

30

mm

30 mm + Glass thickness

Hole 6 mm


6

MODEL MINI

FinishChrome plated

AplicationGlass sliding door

Accesories for 1 set1 lock2 car keys1 nut

Functionto lock - push the cylinderto unlock - turn key

200 key combinations # 14.03.040key alike # 14.03.041

Options15 000 key combinations

Packing100 pcs per box5 box per export carton

MODEL SWAN

FinishGold plated # 14.09.000Chrome plated # 14.09.001

MaterialBrass

Consists of:1 cylinder 20 x 23 mm1 front plate w/bottom support 40 x 40 mm1 back plate 40 x 40 mm2 SISO metal keys, key alike2 transparent cushions1 hexagonal nut1 off-set brass cam1 raised brass striker

FunctionTurn key 180 to lock or unlock

Packing100 pcs per export carton

40

40

40

40

24

40

21

glass 8-10

2

7

14,5

1

A

3

A

GLASS DOOR LOCK MINISLIDING DOORS

BRASS GLASS DOOR LOCK SWAN FOR 8-10 MM GLASS


7

GLASS DOOR LOCK #409SLIDING DOORS

MODEL AUDIO

FinishPlastic black # 14.09.256

ApplicationHinged glass doorsparticularly for audio/hi-fi cabinetsNo boring required

Accessories for one set1 lock1 washer2 screws2 keys

FunctionTurn key 180to lock or unlock

SpecificationPlastic/metal combinationone key change only


GLASS DOOR LOCK AUDIO- NO DRILLING

MODEL # 409

FinishBrass, chrome plated

ApplicationGlass sliding doors

Accessories for one set1 plug - in cylinder1 housing (2 parts)2 rubber washers2 screws2 keys

FunctionPlace cylinder into lock case,turn and remove key,key removable in lockedposition only

SpecificationBrass lock25 key combinations # 14.09.300or key alike # 14.09.315

Packing500 pcs per export carton25 pcs per box


8

GLASS DOOR LOCK VITRIO M- HINGED DOORS

GLASS DOOR LOCK # X-750- NO DRILLING

MODEL VITRIO

FinishChrome plated # 14.09.350Alu finish # 14.09.352Gold plated # 14.09.353Black anodized # 14.09.351Brass plated # 14.09.360

ApplicationDouble hinged glass doorsAccessories for one setA) left door1 decorative cylinder1 stainless steel front plate1 hexagonal nut1 plastic washerB) right door1 off-set hook cam1 stainless steel front plate1 hexagonal nut1 plastic washer2 car keys

FunctionTurn key 90 to lockor unlock

SpecificationCylinder zamakfront plates stainless steel400 key combinations or key alike

OptionMaster key system


31.5+0,5- 0,5

66+0,5- 0,5

30.5+0,5- 0,5

MODEL X-750

FinishChrome plated - 100 mm # 14.09.025Chrome plated - 132 mm # 14.09.030Chrome plated - 135 mm # 14.09.029


Accessories for one set1 removable lock1 ratchet 100 or 132 mm1 screw w/protection pad2 metal keys

FunctionMount ratchet into lock with flat end facing the fastening screw (see illustration).Turn key 180 and remove keyto activate the lock

SpecificationZamak lockRatchet steel25 key combinations

OptionMaster key or key alike



9

BOTTOM TRACKAluminium:Anodized # 22.26.030Standard length: 2 metres

18,1

13,3

5,60,15

PUSH BUTTON LOCK #8600 MF/DOUBLE SLIDING GLASS DOORS

ACCESSORIES

TOP E-TRACKAluminium:Anodized # 22.26.010Standard length: 2 metres

GLASS H-RAILAluminium:Anodized # 22.26.020Standard length: 2 metresFor 5 - 6 mm glass thickness

TROLLEY w/Nylon WheelsNickel plated # 22.26.040Load capacity: 3 kg

U-SPLINE PVC # 22.26.060Rolls of 100 mts

SILENCER # 22.26.070Plastic, clearBags of 100 pcs

END CAP ZAMAKChrome plated # 22.26.050Alu finish # 22.26.049

MODEL # 8600FinishChrome plated # 14.09.420Alu finish # 14.09.423Chrome w/Master key # 14.09.422ApplicationDouble sliding glass doorson alu railsAccessories1 lock cylinder 22 mm1 grub screw for fastening2 metal keys, double entryFunctionPush cylinder to lockTurn key to unlockSpecificationZamak house: 28 x 24 x 12 mm400 key combinations or key alikeOption:Master keyPacking:250 pcs per export carton25 pcs per box

23,4 15

14

5

M4

9

16,5

28

22


10

MODEL #2010

FinishAlu finish # 14.09.460Chrome plated # 14.09.461Gold mat plated # 14.09.463Gold bright plated # 14.09.462

ApplicationDouble sliding glass doorspremounted on aluminium frame

Accessories for one set1 cylinder push lock 22 mm1 universal bottom part premounted for insertion into H-rail on left or right side2 grub screws for fastening onto the h-rail5 allen keys for every 20 lock sets for tightening the grub screws2 car keys, double entry

FunctionPush cylinder to lockand turn key to unlock

SpecificationZamak with 400 key combinationsor key alike



PUSH BUTTON LOCK #2010 M F/DOUBLE SLIDING GLASS DOORS

ACCESSORIES

END CAP ZAMAKChrome plated # 22.26.051Alu finish # 22.26.052

SILENCER# 22.26.070Plastic, clearBags of 100 pcs

U-SPLINE PVC# 22.26.060Rolls of 100 mts

TROLLEY w/Nylon WheelsNickel plated # 22.26.041Load capacity: 3 kg

GLASS H-RAILAluminium:Anodized # 22.26.021Standard length: 2 metresFor 5 - 6 mm glass thickness

12

10

1429

TOP E-TRACKAluminium:Anodized # 22.26.010Standard length: 2 metres

BOTTOM TRACKAluminium:Anodized # 22.26.030Standard length: 2 metres 18,1

13,3

5,60,15


11

W

L1

LG3

HHG

L2 L3

LG2

W

L1

LG3

HHG

L2 L3

LG2

A

C CDD

E F FE E EC

B B B B

A

C CDD

E FG G

G G

FE E EC

B B B B

ATOP E-Track #22.26.010

BSILENCER #22.26.070

inside TOP E-Track

CEND CAP ZAMAK #22.26.050

DU-SPLINE PLASTIC #22.26.060

ETROLLEY #22.26.040

GGLASS H-RAIL #22.26.020

FBOTTOM TRACK #22.26.030

ATOP E-Track #22.26.010

BSILENCER #22.26.070

inside TOP E-Track

CEND CAP ZAMAK #22.26.051

DU-SPLINE PLASTIC #22.26.060

ETROLLEY #22.26.041

GGLASS H-RAIL #22.26.021

FBOTTOM TRACK #22.26.030

System # 8600

System # 2010

L = WL = L + 30 mmL = LH = H - 25 mmL = L - 2 mmL = L - 1mm

1

1

G

G2

G3

1122

2

3

3

12

L = WL = L L = LH = H - 30 mmL = L - 2 mmL = L + 32 mm

1

1

G

G2

G3

1122

2

3

3

12

MOUNTING INSTRUCTION F/LOCK #8600 & #2010


12

PUSH BUTTON LOCK #2740 MW/STRIKER

ApplicationDouble sliding glass doorsPremounted on aluminium frame

FunctionPush & turn cylinder with key to lock & turn key to unlock.Can be installed into H-rail on left or right side

SpecificationZamak with 400 key combinations,key alike or/and master key system

1 set consists of1 cylinder push lock 22 mm with hook pin1 striker2 round SISO metal keys, double entry1 hex key 2 mm2 grub screws for fastening onto the H-rail

Lock #2740 w/strikerAlu finish - key to differ # 14.09.440Alu finish - key alike # 14.09.441Alu finish - w/master key # 14.09.442


29

32,5

18

M4

11

Hex 2 mm

Lock #2740

Striker f/lock #2740

24

22

9

29

32,5

9M4

11

Hex 2 mm

Not for sale in Germany


13

ACCESSORIES F/LOCK #2740 M

Glass door handle - PlasticAlu finish # 14.09.445F/fixing on H-rail w/grub screw

29

32,5

10

M4

10

Hex 2 mm

End cap - PlasticAlu finish # 22.26.053F/pressing into H-rail

12 19,5

2,5229

Trolley - w/ball bearingZinc plated # 22.26.042F/fixing on H-rail be use of tool # 22.26.08Load capacity: 12 kg pr. trolley

Tool for fixing trolleyBlue # 22.26.080

16

848

Bottom frame trackAluminiumAnodized # 22.26.0322 metres length

13

13,7

27,3


14

Bottom TrackAluminiumAnodized # 22.26.0312 metres length

6

18

14,3

Top E-track with feltAluminiumAnodized # 22.26.0112 metres length

9,5

1,2

26

15

9,5

Glass H-rail f/ 5 - 6 mm glassAluminiumAnodized # 22.26.0232 metres length

Side & bottom frame trackAluminiumAnodized # 22.26.0252 metres length

U-SPLINE PVCGrey color #22.26.060Rolls of 100 meters

1,2

30

16

9,23

7,496,35

0,711,95


Anti-lift stopper - PlasticTransparent # 22.26.075F/pressing into top E-track to prevent lifting of glass


15


Bumper frame profile - PVCTransparent # 22.26.0652 metres length

D KDE F

G H GFE E E

C

ATop E-track with felt

#22.26.011

BAnti-lift stopper - Plastic

Inside Top E-track # 22.26.075

CEnd cap - Plastic

#22.26.053

DU-spline - Plastic

#22.26.060

ETrolley - w/ball bearing

#22.26.042

GGlass H-reil f/5 mm glass

#22.26.023

HPush button lock

#2740 M w/striker

Side & bottom frame trackaluminium # 22.26.025

TBumber frame profile - PVC

# 22.26.065

KGlass door handle - Plastic

# 14.09.445

MBottom frame track

# 22.26.032

FBottom Track

#22.26.031

S

T T T

S S

B B

S

S

S

SM

K

AA

T

#2740 Model With frame and high bottom rail (like on picture): GW = ((W 2,50 mm) + 30 mm) x 0,5

With bumpers at the sides deduct 10 mm from the GW result.

GH = H 40 mm

Without frame and with low bottom rail: GW = (W + 30 mm) x 0,5

With bumpers at the sides deduct 10 mm from the GW result.

GH = H 25 mm

Frame Overlay

Overlay

Profile+ air.

Profile+ air.

W = Inside width of frame. GW = Glass width. H = Inside height of frame. GH = Glass height.


16

GLASS DOOR LOCK X-907 MSLIDING DOORS

12,3

6.5

MODEL X-907

FinishChrome plated # 14.09.417Mat nickel plated # 14.09.416Gold plated # 14.09.418Black anodized # 14.09.419


Accessories1 lock2 car keys, double entry2 transparent washers

FunctionPush and turn key90 to lock or unlock

SpecificationZamak400 key combinations or key alike

OptionsMaster key system

Packing200 pcs per box

MODEL #910

FinishChrome plated # 14.09.108

ApplicationGlass hinged doors 4-6 mmBore 25 mm

Accessories for one set1 cylinder lock5 washer (plastic & rubber)1 zamak stopper2 metal keys, double entry

FunctionTurn key 180 to lock or unlock- w/click sound


OptionsMaster key andinterchangeable system


13

GLASS DOOR LOCK #910 MICSINGLE DOOR, HINGED


17

DOOR STOPPER


DOOR STOPPER w/bumper

Finish: black plastic # 14.09.105

Application: glass door hingedRecommended to use with lock 0914

DOOR STOPPER w/hole

Finish: black plastic # 14.09.118

Application: inset glass door hingedRecommended to use with locks X-689 and 910 (as a stopper and striking plate)

MODEL #689

FinishChrome plated # 14.09.130Mat nickel plated # 14.09.131Gold plated # 14.09.129Alu finish # 14.09.132Black anodized # 14.09.136

ApplicationGlass hinged doors 4-6 mmBore: 26 mm

Accessories for one set1 cylinder lock5 plastic washer1 zamak stopper2 car keys, double entry

FunctionTurn key 180 to lockor unlock - w/click sound


OptionMaster key and interchangeable system

Packing20/200 pcs per box

OptionLock can be suplied with special de-signed plate for double hinged door

Chrome plated # 14.09.170Mat nickel plated # 14.09.171Alu finish # 14.09.172Gold plated # 14.09.173


18

MODEL X-916

FinishBlack anodized # 14.09.047Chrome plated # 14.09.048Gold plated # 14.09.049

ApplicationHinged glass doors 4-6 mmBore 19 mm

Accessories for one set1 cam lock1 straight steel cam1 plastic washer + 1 hex nut1 flat striking plate: 11 x 57 mm2 car keys, double entry1 front plate zamak

FunctionTurn key 180 to lockor unlock - w/click action

SpecificationPlate & house: zamak400 key combinations or key alike


Packing12 pcs per box240 pcs per export carton

14

4

GLASS DOOR LOCK X-916 MDOUBLE OR SINGLE DOORS, HINGED

GLASS DOOR LOCK SAFE MSINGLE DOOR, HINGED

MODEL SAFE


ApplicationSingle glass door, hingedBore 19 mm

Accessories for one set1 cam lock1 hexagonal nut1 plastic washer1 straight cam1 front plate1 flat striking plate2 car keys, double entry

FunctionTurn key 90to lock or unlock - w/click sound



Packing12 pcs per box240 pcs per export


19

MODEL VETRO-DOUBLEFinishChrome plated # 14.09.270Gold plated # 14.09.271Black anodized # 14.09.272ApplicationDouble glass doors, hingedNo boring required

Glass thickness: 4 - 6 mmAccessories for one set1 lock w/front plate2 fastening screws1 flat striking plate2 car keys double entry1 plastic distance plate

OptionalsDoor stopper # 14.09.118Spring stopper # 14.09.119

FunctionTurn key 180to lock and reverse to unlock

SpecificationZamak, 400 key combinationsor key alike



4-6

GLASS DOOR LOCK VETRO-DOUBLE MICDOUBLE DOORS, HINGED

GLASS DOOR LOCK VETRO MICSINGLE DOOR, HINGED

MODEL VETROFinishChrome plated # 14.09.261Gold plated # 14.09.260Black anodized # 14.09.262

ApplicationSingle glass door, hingedNo boring required

Glass thickness: 4 - 6 mmAccessories for one set1 lock w/front plate:2 fastening screws1 flat striking plate2 car keys double entry1 plastic distance plate

FunctionTurn key 180 to lockand reverse to unlock

SpecificationZamak400 key combinationsor key alike



8

1.54-6

3

18.5

18

10

35.8

32


20


4-6

MODEL #64081

FinishChrome plated # 14.09.210Gold plated # 14.09.211Black anodized # 14.09.212


Glass thickness: 4 - 6 mm

Accessories for one set1 lock w/front plate2 fastening screws1 flat striking plate2 car keys double entry1 plastic distance plate


SpecificationZamak400 key combinationsor key alike



GLASS DOOR LOCK #917 MICNO BORE - DOUBLE DOORS, HINGED

4-6

MODEL #917

FinishChrome plated # 14.09.220Alu finish # 14.09.223

ApplicationDouble glass doors, hingedNo boring required

Glass thickness: 4 - 6 mmAccessories for one set1 lock w/large front plate2 fastening screws1 flat striking plate2 car keys double entry1 plastic distance plate





Packing12 pcs per box240 pcs per export box carton


21

STRIKER (FOR LOCK X-918)FOR DOUBLE HINGED DOORS

4-6

MODEL STRIKER

FinishChrome plated # 14.09.246Alu finish # 14.09.247Gold plated # 14.09.248



Accessories for one set1 lock w/front plate2 fastening screws1 flat striking plate1 plastic distance plate


GLASS DOOR LOCK #918 MICNO BORE - SINGLE DOOR, HINGED

4-6

MODEL No. 918FINISHChrome plated # 14.09.217Gold plated # 14.09.218Alu finish # 14.09.217-1

ApplicationSingle glass doors, hingedNo boring required

Glass thickness: 4 - 6 mmAccessories for one set1 lock w/front plate2 fastening screws1 flat striking plate2 car keys double entry1 plastic distance plate


FunctionTurn key 180to lock and reverse to unlock





22

SHELF SUPPORTS FOR GLASS

GLASS SHELF SUPPORTwith slide lock No. 1630- moulded in sets (left + right)Material: transparent plastic # 22.02.082Pin: 5 mmBore hole: 9,5 mm from edgeGlass: 5 mmPacking: 3500 pcs

GLASS SHELF SUPPORT CRISTALMaterial: Steel pin 5 mm,mantled with transparent plasticto 7 mm diam.Bright zinc plated # 22.02.037Brass plated # 22.02.038

5,5

GLASS SHELF SUPPORT- with retainerMaterial: Steel pin 5 mm, bright zinc plated and transparent plastic support with retainer

Suitable for GLASS THICKNESS 5,5 mm # 22.02.080

SHELF SUPPORT - w/ flexible Retainer for GLASS SHELVES (min. 5mm)Material: PlasticPIN: 5 mmColours White # 22.02.066 Black # 22.02.067 Brown TransparentFor glass minimum 5mm

GLASS SHELF SUPPORT PARROT w/clip fixing to secure the glass

Material: Zamak, Nickel platedPin: 5 mmGlass thickness: 4 - 8 mmItem No. # 22.02.456

Packing: 1000 pcs per export carton

214-8

5PUSH

HIGH or LOW 4-8 mm

12

13

7


23

SHELF SUPPORT - "Double" - Brass -w/2 black rubber rings

Material: Brass, nickel platedSize: 2 pcs each 12 x 18 mmBore: 8 mmGlass thickness: 6 - 8 mm

Item No.: # 22.02.116


SHELF SUPPORT ALFA - w/ catch for glass 4-8 mmwith eccentric Pin 5 mm ZamakNickel plated # 22.02.245

OptionsWithout pin but with hole 5 mm for screw

SHELF SUPPORT w/2 rubber O-rings Material Steel, NPL # 22.02.200

Packing5000 pcs

SHELF SUPPORT w/soft plastic screw

MaterialZamak, nickel plated

Sizes: D L 8 mm 5 mm 8 mm # 22.02.231 5 mm 5 mm 8 mm # 22.02.230

Packing1000 pcs

SHELF SUPPORT W/SUCTION PAD

MaterialZamak, nickel platedNO.213 # 22.02.240NO.215 # 22.02.241

Packing2500 pcs

# 213

# 215

SHELF SUPPORT - "Double" - Steel -w/2 transparent rings

Material: Steel, chrome platedSize: 2 pcs each 12 x 19 mmBore: 8mmGlass thickness: 4 8 mm

Item No.: # 22.02.111

SHELF SUPPORT - "Double" - Steel -w/4 transparent rings

Material: Steel, chrome platedSize: 2 pcs each 11 x 19 mmBore: 8 mm

Glass thickness: 4 8 mmItem No.: # 22.02.110


24

SHELF SUPPORT - "Single" - Brass -w/1 black rubber ring

Material: Brass, nickel platedSize: 12 x 18 mmBore: 8 mmGlass thickness: 6 - 8 mm

Item No.: # 22.02.115

SHELF SUPPORT - "Single" - Steel -w/2 transparent rings Material: Steel, chrome platedSize: 11 x 19 mmBore: 8 mmGlass thickness: 4 - 8 mm

Item No.: # 22.02.105

SHELF SUPPORT - "Single" - Steel -w/1 transparent ring

Material: Steel, chrome platedSize: 12 x 19 mmBore: 8 mmGlass thickness: 4 8 mm

Item No.: # 22.02.106

SHELF SUPPORT - CylindricalMounting with wood screw 4,5 mmMaterial: ZamakSizes SCPL 17 mm 4 - 6 mm # 22.02.220ALU 17 mm 4 - 6 mm # 22.02.221CPL 20 mm 8 -10 mm # 22.02.210ALU 20 mm 8 -10 mm # 22.02.213

Packing100 pcs

126

11

19

2

19

4

4

4

24


GLASS SHELF SUPPORT SQUAREw/4 mm screw hole, CSK

Material: ZamakSize: (W/H/D) 30 x 27 x 16 mmGlass thickness: 4 - 8 mmChrome plated # 22.02.560Alu finish # 22.02.561SS-look # 22.02.563

30

273

4

16

4 mm HEX

4-8 mm glass

EXTRA RUBBER washer for shelf support # 22.02.115 & 116Transparent # 22.02.114


25

GLASS SHELF SUPPORT SQUARE"X-STRONG"

Material: ZamakSize: (W/H/D) 30 x 30 x 27 mmGlass thickness: 4 - 8 mmMounting: 4 mm CSK holeChrome plated # 22.02.610Alu finish # 22.02.611

30

27

4

M10

1730

4-8 mm glass

3

GLASS SHELF SUPPORT SQUARE XL


58

100

27

16

4,5

M10

4-7 mm glass

3


GLASS SHELF SUPPORT HALF MOONw/4 mm screw hole, CSK


50

30

16

27

4 mm HEX

4-8 mm glass

4

3,

GLASS SHELF SUPPORT MUSw/4 mm screw hole, CSK


4 mm HEX

6-10 mm glass

15

27

4

163

GLASS SHELF SUPPORT HALF-MOON"X-STRONG"


50

30

1730

27

4-8 mm glass

4

3

M10


26

GLASS SHELF SUPPORT DOME LARGE w/5 mm screw holes, CSK

Material: ZamakSize: (W/H/D) 49 x 24 x 23 mmGlass thickness: 7 - 10 mmChrome plated # 22.02.580Alu finish # 22.02.581

Inclusive screws and wall plugs

Slot

49

36518

24

7-10 mm glass

233,5


GLASS SHELF SUPPORT RECTA SMALL w/4 mm screw holes, CSK

Material: Zamak, Chrome platedSize: (W/H/D) 39 x 23 x 18 mmGlass thickness: 4 - 7 mmItem No. # 22.02.590


20

39

18

23

Slot

4

4-7 mm glass

3

GLASS SHELF SUPPORT RECTA LARGE w/5 mm screw holes, CSK



3819

50

25

Slot

4

26

4-10 mm glass

GLASS SHELF SUPPORT DOME SMALL w/4 mm screw hole, CSK



Slot

37

21

19

4-7 mm glass

18

4

3,5

GLASS SHELF SUPPORT CYLINDRICALw/M6 mm screw hole

Material: ZamakSize: 20 x 26 mmGlass thickness: 6 - 10 mmChrome plated # 22.02.226Alu finish # 22.02.227SS-look # 22.02.228

26

M6

4 mm HEX

20

6-10 mm glass

9,5

GLASS SHELF SUPPORT CYLINDRICAL F/GLASS WALL FIXING

Material: BrassSize: 20 x 26 mmGlass thickness: 6 - 10 mmChrome plated # 22.02.235

20

M8

20 15

10

M6

10,5

10,5

6-10 mm glass


27

1 SET CONSISTS OF:2 x 2 meters 1,5 mm SS 304 wire2 x top fixings & 2 bottom fixings with spring tensionSuitable for A1, A2, A3 & A4 signs(Sign holders to be bought separately)

Item No. # 22.12.050

CABLE SIGN HOLDERS IN ALUMINIUM

Size: 16 x 27 mmDisplay thickness from 6 - 8 mm4 pcs per sign is needed

Item No. # 22.12.060

CABLE SIGN SYSTEM F/WALL MOUNTINGALUMINIUM ANODIZED

16

16

43

38

45

4,2

3

45

4,2

M14

15

62

Hex 3 mm

M6 Hex 3 mm

16

27

Hex 3 mm

M6

Hex 3 mm

8

Top fixing

Bottom fixing


28

Shelf stick

1 SET CONSISTS OF:2 x 4 meters 3 mm SS 304 wire2 x top fixings & 2 bottom fixings with spring tension4 x shelf sticksMax 20 kg per shelfMax shelf size: 330 x 500 mm (D/L)(Shelf holders to be bought separately)

Item No. # 22.12.000

CABLE SHELF SYSTEM F/WALL MOUNTINGALUMINIUM ANODIZED

CABLE SHELF HOLDERS IN ALUMINIUM

Size: 16 x 27 mmDisplay thickness from 6 - 8 mm4 pcs per shelf is needed

Item No. # 22.12.010M6 Hex 3 mm

M6 8

Hex 3 mm

16

27

Hex 3 mm

M6

Hex 3 mm

45

4,2

16 Left thread Right thread

16 62

3

45

4,2 16

35

16

Top fixing

Bottom fixing

M6

Hex 3 mm

M6 Hex 3 mm

16

272


29

ADJUSTABLE SHELF SUPPORT PELICANS

MODEL NO. 53For glass & wood shelves

Material: ZamakShelf thickness: 4-40 mm Max load: 40 kg

Finish:Alu finish # 22.02.550Mat nickel # 22.02.551Polished chrome # 22.02.552



Finish:Alu finish # 22.02.545Mat nickel # 22.02.546Polished chrome # 22.02.547SS-look # 22.02.548



Finish:Polished chrome # 22.02.495SS-look # 22.02.496


Material: ZamakShelf thickness: 4-26 mm Max load: 30 kgFinish:Mat chrome coated # 22.02.540Mat nickel coated # 22.02.541Polished chrome # 22.02.542SS-look # 22.02.543



Finish:Mat chrome coated # 22.02.520Mat nickel coated # 22.02.521Polished chrome # 22.02.522SS-look # 22.02.523

36

4025


30

41

37 33

40

40 40

ADJUSTABLE SHELF SUPPORT PELICANS



Finish:Chrome plated # 22.02.525Alu finish # 22.02.526SS-look # 22.02.527



Finish:Chrome plated # 22.02.555Alu finish # 22.02.556SS-look # 22.02.557



Finish:Black coated # 22.02.470Alu finish # 22.02.471Polished chrome # 22.02.472SS-look # 22.02.473Matt nickel # 22.02.474



Finish:Black coated # 22.02.475Alu finish # 22.02.476Polished chrome # 22.02.477SS-look # 22.02.478Matt nickel # 22.02.479



Finish:Mat chrome coated # 22.02.510Mat nickel coated # 22.02.511Polished chrome # 22.02.512SS-look # 22.02.513

4-44 mm

20 mmM6

65,5

20 mm

4-22 mm

M6


31

ApplicationBalconies, balustrade, shelfs etc.

Material Zamak

Model Large w/round rubber rings f/glass thickness 6-8 mm

Chrome plated # 22.10.150Gold plated # 22.10.151Matt nickel plated # 22.10.152Alu finish # 22.10.156

Packing100 pcs per carton

6-8

3 mm HEX

6-8

18,5

rubber cushions

ZAMAK GLASS CLAMP N0. 31F/WALL MOUNTING


Material Zamak

Model Medium w/flat rubber cushions f/glass thickness 6-8 mm

Chrome plated # 22.10.160Matt nickel plated # 22.10.161SS-look # 22.10.162


41

52

6,5

6-8

6-8

3 mm HEX

20,5

rubber cushions


Material Zamak

Model Small w/flat rubber cushions f/glass thickness 4-5 mm

Chrome plated # 22.10.165Matt nickel plated # 22.10.166


2414

4-5

4-5

28

3,5

9

rubber cushions


32

ApplicationBalconies, balustrade, staircases etc.

Material Zamak

45 mm tube L w/round rubber rings f/glass thickness 6-8 mm



45

6-8

6-8

18,5

rubber cushions

3 mm HEX

ZAMAK GLASS CLAMP N0. 31F/TUBE MOUNTING


Material Zamak

38 mm tube M w/flat rubber cushions f/glass thickness 6-8 mm



55

6,5

38 6-8

6-8

20,5

rubber cushions

3 mm HEX


Material Zamak

31 mm tube S w/flat rubber cushions f/glass thickness 4-5 mm



4 24

30

14

31

4-5

4-5

9

rubber cushions


33

STAINLESS STEEL & ZAMAK GLASS CLAMPSAPPROVED BY TV GERMANY ACCORDING TO EN-12600

50 kg

1500

450

1000

ON THE BASIS OF THE EN-12600 STANDARD, SISOS GLASS CLAMPS MODEL SQUARE, OVAL-S & OVAL-L IN STAINLESS STEEL 304, 316 & ZAMAK

HAVE BEEN APPROVED BY TV GERMANY.

DROP IMPACT TEST DROP IMPACT TEST

STATIC TEST


34

Material: Brushed stainless steel 304 & 316 or zamak, raw

Glass thickness: 6 - 10,76 mmSize: 45 x 47 x 27 mm

Model Flat without cushionsSS-316 Brushed # 22.10.200-0SS-304 Brushed # 22.10.200-9Zamak Raw # 22.10.200-8

Model Tube 33,7 mm without cushionsSS-316 Brushed # 22.10.201-0SS-304 Brushed # 22.10.201-9Zamak Raw # 22.10.201-8



EPDM-cushions to regulate glass thickness to be bought seperately

Optional:Cover cap - silver color # 22.10.251

Mounting screw SS 304 for clamp fixingM8 x 12 mm # 22.10.248M8 x 14 mm # 22.10.249

45

12

9

47

27

# 22.10.200 # 22.10.201

45

12

9

54

F/tube

33,7

14 14

14 14 # 22.10.202

45

12

9

51

F/tube

42,4

# 22.10.203

45

12

9

51

F/tube

48,3

17

17 17

17

4 mm HEX 4 mm HEX

4 mm HEX 4 mm HEX

6 mono 4 + 5 22.10.207 + 22.10.208

MODEL

6,76 Lam. 4 + 4 22.10.207 + 22.10.207

SQUARE"

8 mono 3 + 4 22.10.206 + 22.10.207 8,76 Lam. 3 + 3 22.10.206 + 22.10.206 10 mono 2 + 3 22.10.205 + 22.10.206

10,76 Lam. 2 + 2 22.10.205 + 22.10.205

Item numbers Glass thickness Glass Type Cushion

mm

STAINLESS STEEL & ZAMAK GLASS CLAMPS SQUARE


35

STAINLESS STEEL & ZAMAK GLASS CLAMPS OVAL-S

Material: Brushed/polished stainless steel 304 & 316 or zamak, raw

Glass thickness: 6 - 10,76 mm

Size: 45 x 50 x 27 mm

Model Flat without cushionsSS-316 Brushed # 22.10.210-0SS-316 Polished # 22.10.260-0SS-304 Brushed # 22.10.210-9Zamak Raw # 22.10.210-8


Model Tube 42,4 mm without cushionsSS-316 Brushed # 22.10.212-0SS-316 Polished # 22.10.262-0SS-304 Brushed # 22.10.212-9Zamak Raw # 22.10.212-8



Optional:Safety pins 5,5 x 18 mmWhite plastic # 22.10.240SS-304 w/tube # 22.10.239

Cover cap - silver color # 22.10.251

Mounting screw SS 304for clamp fixingM8 x 12 mm # 22.10.248M8 x 14 mm # 22.10.249

20

40

12

9

50

15

27

15 15

15# 22.10.210

40

12

9

56

F/tube

33,7

F/tube

F/tube

# 22.10.211

40

12

9

55

42,4

# 22.10.212

40

12

9

55

16 16

16

48,3

# 22.10.213

4 mm HEX 4 mm HEX

4 mm HEX 4 mm HEX16

6 mono 5 + 5 22.10.217 + 22.10.217

MODEL

6,76 Lam. 4 + 5 22.10.216 + 22.10.217

OVAL-S

8 mono 4 + 4 22.10.216 + 22.10.2168,76 Lam. 3 + 4 22.10.215 + 22.10.21610 mono 3 + 3 22.10.215 + 22.10.215

10,76 Lam. 2 + 3 22.10.214 + 22.10.215

Glass thickness Glass Type

Cushion mm Item numbers


36

30

45

12

9

63

27

# 22.10.220 # 22.10.221

45

12

9

70

15 15

15 15

33,7

# 22.10.222

45

12

9

67

42,4

# 22.10.223

45

12

9

67

48,3

4 mm HEX 4 mm HEX

4 mm HEX 4 mm HEX

16 15

15 15

6 mono 5 + 5 22.10.227 + 22.10.227

MODEL

6,76 Lam. 4 + 5 22.10.226 + 22.10.227

OVAL-L

8 mono 4 + 4 22.10.226 + 22.10.226 8,76 Lam. 3 + 4 22.10.225 + 22.10.226 10 mono 3 + 3 22.10.225 + 22.10.225

10,76 Lam. 2 + 3 22.10.224 + 22.10.225

Glass thickness Glass Type

Cushion mm Item numbers

F/tubeF/tube

F/tube

STAINLESS STEEL & ZAMAK GLASS CLAMPS OVAL-L

Material: Brushed stainless steel 304 & 316 or zamak, rawGlass thickness: 6 - 10,76 mmSize: 45 x 64 x 26,5 mmModel Flat without cushionsSS-316 Brushed # 22.10.220-0SS-304 Brushed # 22.10.220-9Zamak Raw # 22.10.220-8Model Tube 33,7 mm without cushionsSS-316 Brushed # 22.10.221-0SS-304 Brushed # 22.10.221-9Zamak Raw # 22.10.221-8Model Tube 42,4 mm without cushionsSS-316 Brushed # 22.10.222-0SS-304 Brushed # 22.10.222-9Zamak Raw # 22.10.222-8Model Tube 48,3 mm without cushionsSS-316 Brushed # 22.10.223-0SS-304 Brushed # 22.10.223-9Zamak Raw # 22.10.223-8


Optional:

Safety pins 7,5 x 19 mmWhite plastic # 22.10.241SS-304 w/tube # 22.10.242

Cover cap - silver color # 22.10.251

Mounting screw SS 304 for clamp fixingM8 x 12 mm # 22.10.248M8 x 14 mm # 22.10.249


37

STAINLESS STEEL & ZAMAK GLASS CLAMPS SQUARE W/ BOTTOM PLATE F/EASY MOUNTING

Material:Brushed or polished stainless steel 304 & 316 or zamak, raw.

Glass thickness: 6,76 12,76 mm

Size: 45 x 47 x 30 mm

Specifications:Flat back side.W/stainless steel bottom plateWithout cushions (to be boughtseparately)

Item No:Zamak raw # 22.10.300SS 304 brushed # 22.10.310SS 316 brushed # 22.10.320SS 316 polished # 22.10.321

45

12

9

47

30

24 2

13,5

17

17 mm (SS material)19 mm (zamak material)

4 mm HEX

MODEL SQUARE Glass thickness Glass type Cushion mm Item numbers

6,76 mm Lam. 6 + 6 22.10.209 + 22.10.209 8 mm Mono 5 + 6 22.10.208 + 22.10.209

8,76 mm Lam. 5 + 5 22.10.208 + 22.10.208 10 mm Mono 4 + 5 22.10.207 + 22.10.208

10,76 mm Lam. 4 + 4 22.10.207 + 22.10.207 12 mm Mono 3 + 4 22.10.206 + 22.10.207

12,76 mm Lam. 3 + 3 22.10.206 + 22.10.206


38

BALUSTER POSTS IN SS-304

Application:Baluster posts square or round tubes,for balconies, balustrades, stair cases etc.

Material:Brushed stainless steel 304

Sizes: 40 x 40 x 960 x 1,5 mmor 42,2 x 960 x 1,7 mm

Specifications:Supplied with pre-tapped holesfor mounting of glass clamps.Fixed or flexible handrail tops(not adjustable in the height)

Models:Square w/fixed handrail top f/square tubes W/ 2 through holes # 22.10.350W/ 2 holes on one side # 22.10.351W/ 2 holes on 2 sidesfor 90 angle # 22.10.352

Square w/flexible handrail topf/square tubes W/ 2 through holes # 22.10.355W/ 2 holes on one side # 22.10.356W/ 2 holes on 2 sidesfor 90 angle # 22.10.357

Round w/fixed handrail top f/42,2 mm tubes W/ 2 through holes # 22.10.360W/ 2 holes on one side # 22.10.361W/ 2 holes on 2 sidesfor 90 angle # 22.10.362

Round w/flexible handrail top f/42,2 mm tubes W/ 2 through holes # 22.10.365W/ 2 holes on one side # 22.10.366W/ 2 holes on 2 sidesfor 90 angle # 22.10.367

Packing:1 post incl. mounting screws M8 x 14 mmfor fixing of glass clamps.Incl. base cover & 4 floor plugs and screws

Glass clamps to be ordered separately.

40 x 40 960

960

42,4

Flexible handrail top


39

MAGNETIC TOUCH LATCHES

MAGNETIC TOUCH LATCHKnock in type- No striker included

Finish: Black Plastic # 22.01.095Bore: 11 x 38 mm


MAGNETIC TOUCH LATCH- SINGLEScrew on - No striker included- round type

Finish: black plastic # 22.01.070Fixation: c.c. 22 mm


MAGNETIC TOUCH LATCH- DOUBLEScrew on - no striker included- round type

Finish: black plastic # 22.01.088Fixation: c.c. 18 mm/51 mm

Packing500 pcs per box

MAGNETIC TOUCH LATCH- SINGLEScrew on - no striker included- square type

Finish: black plastic # 22.01.075Fixation: c.c. 32 mm


MAGNETIC TOUCH LATCH- DOUBLEScrew on - no striker included- square type

Finish: black plastic # 22.01.087Fixation: c.c. 32 mm/64 mm



40

adhesive tape on striker & wood screw

14,5

83

20,5 20,5

11 4x3,4

9,5

26 or 46

20

20

10 5

1,2

84,5

adhesive tape on striker & wood screw

scr

84,5

Black

White

Grey

20 mm40 mm

20 mm. extension40 mm. extension

Mounting of latch

In closed position, press the tab upwards or downwards to choose the length of extension

CHANGE OF EXTENSION LENGTH

Clip the body to the front of the base plate.

1

Press the body onto the back of the base plate until

2 3

MAGNET TOUCH LATCH SLIMW/STRIKERApplication: Push-to-open touch latch for doors and drawers with magnet & striker. Suitable for wood & glass fronts

Material: Black ABS, White ABS, Grey ABS RAL 7040

Overall size: 84,5 mm x 14,5 mm

Extended: 105 mm

Item No.: # 22.01.104 (White) # 22.01.105 (Black) # 22.01.106 (Grey)

Incl. Steel striker 20 x 20 mm with adhesivetape for glass fixing & screw hole forwood fixing.

Screws to be ordered separately

TOUCH LATCHES PUSH-TO-OPEN


41

STRIKING PLATES

ROUND STRIKER - SELF ADHESIVEFor Rigid Fixation- Stick On Type

Material: SteelNickel plated # 22.01.118Diameter: 19 mm

SQUARE STRIKER - SELF ADHESIVEFor Rigid Fixation- Stick On Type

Material: SteelNickel plated # 22.01.127

Size: 26 x 22 mm

22

26 1,2

CATCH PLATE - GLASSwith Handle & PadSize: 23 x 40 mm4-6 mm glass thickness

Material: SteelChrome plate # 22.03.015Black anodized # 22.03.016Brass plated # 22.03.017


4-6

CATCH PLATE - GLASSWith HandleModel: #558Size: 20 x 20 mm4-6 mm glass thickness

Material: Steel Black anodized # 22.03.018


4-6

CATCH PLATE - GLASSWith PadSize: 40 x 25 mm 4-6 mm glass thickness

Material: SteelBrass plated # 22.03.100Black anodized # 22.03.111Chrome plated # 22.03.115


4-6


42

GLASS DOOR HINGES MINIWITH FRONT COVER

COVER CAPS FOR HINGE MINI

Application case of glass hinge 26 mmH - height of mounting plateD - panel thicknessK - drilling distance from the edge of glass door to the edge of the holeA - gap between door and side board

H

Glassdoor

Full overlay

K

D H=12+K-D

Sideboard

Inset

D Glassdoor

KA

H=-6+K+A

H

Sideboard

DH

0 15 16 17 18 19

K 3 4 5 6 7 AH

0 3 2 1 0 -1

K 3 4 5 6 7

AUTOMATIC GLASS DOOR HINGE WITHDOUBLE SPRING ACTIONOpening angle: 92Glass door drilling:26 mm for glass thickness 4 to 6 mmSupplied complete with wing mountingplate.Steel nickel pl. 3 mm distancefor chipboard screw attachmenthousing: plastic blackHingearm keyhole type,steel nickel pl.

TYPE A = FULL OVERLAY DOORS0 mm cranking # 15.01.700

TYPE C = INSET DOORS17 mm cranking # 15.01.710

31

31

41

FRONT COVER PLASTICRound cover, chrome # 15.02.720Round cover, gold # 15.02.721Round cover, black # 15.02.722Round cover, alu # 15.02.723Round cover, matt NPL # 15.02.724

Oval cover, chrome # 15.02.730Oval cover, gold # 15.02.731Oval cover, black # 15.02.732Oval cover, alu # 15.02.733Oval cover, matt NPL # 15.02.734


43

GLASS DOOR HINGE SMART-92WITH FRONT COVER

32

4-6

4-6 26 +0,1

26 +0,1

2,5

b

6

12 6+b

32

32

4-6

19

GLASS DOOR HINGE SMART-92ApplicationFor inset doors. Ideal for furniture where only a very narrow wooden side-wall/pole is available.Direct fixing to side-wall/pole without any mounting plate

MountingGlass door drilling: 26 mmGlass thickness: 4-6 mmC.C. 32 mm

MaterialHinge arm: Zamak, nickel platedHinge cup: Black plasticItem No. # 15.01.000Plastic cover cap 32 mm

FinishAlu finish # 15.01.050


44

SOFT CLOSE MINI GLASS DOOR HINGE 26 MM - 95

H = height of mounting plateD = required door overlayK = drilling distance from the edge of door to the edge of the cup holeA = gap between door and sidepanel

Side to side adjustmentIn & out adjustment

Up & down adjustment

Inset (C)

A= 1,0 mm

K=5A

H=0

Door

Sid

e pa

nel

Half overlay (B)

D= 8,5 mm

K=5

H=0

D

Door Door

Sid

e pa

nel

Full overlay (A)

D= 17,5 mm

K=5

H=0

Door

D

Sid

e pa

nel

SOFT CLOS

E

CLIP-ON

F/ 4-6 MM G

LASS

26 MM

Hinge w/mounting plate f/easy up & down adjustment (optional)

Standard model


45

SOFT CLOSE MINI GLASS DOOR HINGE 26 MM - 95

Steel - Nickel Plated Item No. D: A:Overlay calculations Gap calculations

15.01.720Incl. SISO

name plate + mounting plate

H = 0

D KH

3 4 5

0 15,5 16,5 17,52 13,5 14,5 15,54 11,5 12,5 13,5

15.01.721Incl. SISO


H = 0

D KH

3 4 5

0 6,5 7,5 8,52 4,5 5,5 6,54 2,5 3,5 4,5

15.01.722Incl. SISO


H = 0

A KH

3 4 5

0 1 0 -12 3 2 1

H = 0f/chipboard

screwsClip-on

Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.

15.03.728-0H = 0

f/euro screwsClip-on

To be ordered separately if easy up & down adjustment is wanted. Pre-mounted euro screws included.

Opening angle: 95oDepth of hinge cup: 10,6 mmDiameter of hinge cup: 26 mmPossible drilling distanceson the glass door (K): 4-7 mmGlass door thickness: 4-6 mm

K

H

Door

D

H=12,5+K-D

37

32

32

37

KA

H

Door

H=-4+K+A

Sid

e pa

nel

K

H

D

Door

H=3,5+K-D

Sid

e pa

nel

Sid

e pa

nel

15.01.830 , ABSChrome plated cover

15.01.831 , ABSAlu plated cover


15.01.820 , ABS Chrome plated cover

Full overlay (A)

Half overlay (B)

Inset (C)

2

2

Cup drawing

26 mm

15.01.830 , ABS 15 01 821 ABS15.01.820 , ABS 15.01.831 , ABS


46

SOFT CLOSE MAXI GLASS DOOR HINGE 35 MM -100

H = height of mounting plateD = required door overlayK = drilling distance from the edge of door to the edge of the cup holeA = gap between door and sidepanel

Side to side adjustmentIn & out adjustment

Up & down adjustment

Inset (C)

A= 0,5 mm

K=5A

H=0

Door

Sid

e pa

nel

Half overlay (B)

D= 10 mm

K=5

H=0

D

Door Door

Sid

e pa

nel

Full overlay (A)

D= 19 mm

K=5

H=0

Door

D

Sid

e pa

nel

Hinge w/mounting plate f/easy up & down adjustment (optional)

Standard model


47

SOFT CLOSE MAXI GLASS DOOR HINGE 35 MM -100

Steel - Nickel Plated Item No. D: A:Overlay calculations Gap calculations

15.01.715Incl. SISO


H = 0

D KH

3 4 5 6 7

0 17 18 19 20 212 15 16 17 18 194 13 14 15 16 17

15.01.716Incl. SISO


H = 0

D KH

3 4 5 6 7

0 8 9 10 11 122 6 7 8 9 104 4 5 6 7 8

15.01.717Incl. SISO


H = 0

A KH

3 4 5 6 7

0 1,5 0,5 0,5 -1,5 -2,52 3,5 2,5 1,5 0,5 -0,54 5,5 4,5 3,5 2,5 1,5

H = 0f/chipboard

screwsClip-on

Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.

15.03.728-0H = 0

f/euro screwsClip-on

To be ordered separately if easy up & down adjustment is wanted. Pre-mounted euro screws included.

Opening angle: 100oDepth of hinge cup: 11,3 mmDiameter of hinge cup: 35 mmPossible drilling distanceson the glass door (K): 4-8 mmGlass door thickness: 4-6 mm

K

H

Door

D

H=14+K-D

32

37

32

37

KA

H

Door

H=-4,5+K+A

Sid

e pa

nel

K

H

D

Door

H=5+K-D

Sid

e pa

nel

Sid

e pa

nel

15.01.810 , ABSChrome plated cover



15.01.800 , ABS Chrome plated cover

Full overlay (A)

Half overlay (B)

Inset (C)

2

2

Cup drawing

35 mm


48

GLASS DOOR HINGE NICE

MODEL ELEGANT

MaterialNatural brass

FinishBrushed natural brass # 15.06.460Brushed nickel # 15.06.461

MountingInset doors 6 mm thicknessOpening 270Drill size 12 mm

Packing40 pcs

MODEL NICE

FinishChrome plated w/catch # 15.06.450Chrome plated no catch # 15.06.455

MaterialSolid brass polishedBrass chrome bright

MountingInset doors 4-6 mm thickness without catchOpening angle: 105universal top or bottomheight can be adjustedDrill size 19 mm diam.

4-6

5-851

10

21

28

21,526,5

10

31

3,2 x 7

3,2 x 7

41

8

28 5254

18 6

6

3-4,2 x 7

49

18

18

48

5-851

10

21

28

23,523,5

10

31

3,2 x 7

41

8

28

10

5251

24 66

3-4,2 x 7

53,5

18

18

48

Half-overlay

InsetMODEL GRACE

Mounting: Glass: 10 mm boring holes Wood: 7 x 4 mm screw holesMaterial: Stainless steel 304 - polishedHinge size: 52 x 31 x 13 mm (H/W/D)Glass thickness: 5 - 8 mmMax door size: 650 x 900 mmMax door weight: 6 kg per hinge

Function: Inset or half-overlay Opening 180 Inset: # 15.06.470Half-overlay: # 15.06.471

Each hinge is supplied with 2 white cushions 1 mm thickness

GLASS DOOR HINGE GRACE SS304 FOR WOOD/GLASS

Inset

Half-overlay

GLASS DOOR HINGE ELEGANT


49

Application:Suitable for glass doorDrilling/cutting required

Opening: 180Glass thickness: 6 mmMaterial: Brass

1 hinge consists of:1 hinge 54,5 x 73 mm4 transparent cushions 1 mm thickness4 transparent tubes 12 mm1 L-shaped hex key 4 mm

Finish:Chrome plated # 15.23.050

Packing:20 pcs per carton


Opening: 180Glass thickness: 6 - 8 mmMaterial: Brass

1 hinge consists of:1 hinge 100 x 40 mm4 transparent cushions 1 mm thickness2 transparent tubes 12 mm1 L-shaped hex key 4 mm




Angle: 90Glass thickness: 6 - 8 mmMaterial: Brass

1 clamp consists of:1 clamp 50 x 50 mm2 transparent cushions 1 mm thickness1 transparent tubes 12 mm2 cover caps1 L-shaped hex key 4 mm1 wall plug1 wall mounting screw



GLASS DOOR HINGE ROMEGLASS TO GLASS 180

GLASS CLAMP ROMEWALL TO GLASS 90

GLASS DOOR HINGE "SOFIA"GLASS TO GLASS 180

54,5 mm

48 mm

012

30 mm

73 mm

6 mm

30

6 - 8

100

39,6 mm

60 mm

40

12

50 mm

50 40

40 mm

R 20

5

6 - 8

12


50

GLASS DOOR HINGE BOSCH GLASS/GLASS

Model BOSCH

Material3 mm brass

Hinge size: 30 x 80 mm (H/W)

FunctionInset or overlay doors

Glass thickness: 6 mmOpening angle: 270Drilling: 11 mm


M6

glass 6 mm

M6

PVC cushions

3

80

60

10,7

25

30

10,7

MODEL BOSCH F/WALL TO GLASS

MaterialBrass, Chrome plated

SizeHinge: 25 x 30 mm (H/W)Mounting plate: 25 x 12 mm (H/W)

FunctionInset doors

Glass thickness: 6 - 8 mmDrilling: 11 mm


25

30

glass 6-8

glass 6-8

33,5

21,5

3

330

17

11

24

GLASS DOOR HINGE BOSCH WALL/GLASS


51

MODEL SWAN

FinishGold plated # 15.30.000Chrome plated # 15.30.001

MaterialBrass

Consists of1 hinge 60 x 30 mm2 cork cushions1 brass screw M6 x 10 mm, 4 mm hex

FunctionInset doors, max 6-8 mm glass thicknessMax door size 1400 x 700 mm12 mm drilling holeOpening angle 90

Packing 200 pcs per export carton

30

18 40 6-8 mm glass

30 60

12 drilling hole

29,5

2,8

4 mm HEX

BRASS GLASS DOOR HINGE SWANF/6-8 MM GLASS

LIFT-OFF BUTT HINGE SS304FOR UV-GLUE

65 2,5

50

Mounting: By UV-glue B 682-0 from Bohle. UV-lamp is needed

Material: 2,5 mm stainless steel 304 - polished

Hinge size: 65 X 50 mm (H/W)

Function: Inset doors Max door width 500 mm Load capacity: 7,5 KG per pair Opening angle 270 Glass thickness: 4-8 mm Right hand: # 15.13.590Left hand: # 15.13.600


52

BUTT HINGE SS304 FOR UV-GLUE

Mounting: By UV-glue B 682-0 from Bohle. UV-lamp is needed

Material: 2 mm stainless steel 304 - polished

Hinge size: 65 x 50 mm (H/W)

Function: Inset doors Max door width 500 mm Load capacity: 7,5 KG per pair Opening angle 270 Glass thickness: 4-8 mm Item No: # 15.13.105

65

50

2

GLASS DOOR HINGE BRASS FOR UV-GLUE

Mounting:By UV-glue B 682-0 from BohleUV-lamp is neededMaterial: 2,9 mm Brass - Chrome PlatedHinge size: 60 x 60 mm (H/W)

Function: Inset doorsMax door width 500 mm

Load Capacity: 7,5 Kg per pairOpening: 270Glass thickness: 4-8 mm

Finish: Chrome Plated (CPL) # 15.13.110SS-Look (nickel brushed) # 15.13.111

60

60

26

2,9

6


53

PIVOT HINGE FOR UV GLUE, SS-304

Description: Pivot hinge for UV-glue, max 12 mm glass thickness, max load cap. 10 kg per pair.

A threaded pin in the hinge allows the door to be removed after gluing.

Finish:Brushed SS-304

Item No: Pivot Hinge 20 mm # 15.06.015Pivot Hinge 30 mm # 15.06.016

Description: Pivot hinge for UV-glue, 6-10 mm glass thickness, 180, max load cap. 5 kg per hinge.

For the door a lateral overhang of at least 28 mm must be considered on the cabinet.


Item No: Pivot Hinge 24 mm # 15.06.010Pivot Hinge 44 mm # 15.06.011

Description: Magnetic catch for UV glue, magnetic locking-force 2 kg.


Item No: Magnetic catch 30x12x12 mm # 22.01.140Magnetic catch 11x12x12 mm # 22.01.145

PIVOT HINGE FOR UV GLUE, SS-304

MAGNETIC CATCH FOR UV GLUE, SS-304

2018,5

3024,5

43

24

66

44

# 15.06.010

# 15.06.011

30

19

12

12

2 x 7,3

2 x 45

11

7,3 7

612

12 2 x 45


54

GLASS DOOR HINGE 11.300 - NO DRILLING

GLASS DOOR HINGE 11.561 - NO DRILLING

MODELNo. 11.300 inset doors

Material: SteelChrome plated # 15.06.036Brass plated # 15.06.035Black anodized # 15.06.037Alu finish # 15.06.038

Mounting: Top + BottomInset Doors, max 4-6 mmComplete with nylon bushingsFront plate:Size: 50 x 23 mm - polished

Matching handle:See page 31

Packing:Each pair (Right + Left)is packed in a polybag completewith bushings & steel screws w/soft tip

BALL CATCH # 15.06.076Material: BrassSize: 8 mm x 13 mm Optional, to be ordered separately

MODELNo. 11.561 inset doorsMaterial: SteelChrome plated # 15.06.096Black anodized # 15.06.095Alu finish # 15.06.098Mounting: Top + BottomInset Doors, max 5 mmComplete with nylon bushings& sleeveFront plate:Size: 40 x 15 mm - polishedMatching handle:See page 31Packing:Each pair ( Right + Left) is packed in a polybag complete with bushings & sleeves.500 pairs per boxBALL CATCH # 15.06.076Material: BrassSize: 8 mm x 13 mmOptional, to be ordered separately

(Optional)


55

MODEL SMALL

Mounting: Inset doors. Complete with brass bushings & soft tip screws

Material:2 mm stainless steel, polished

Hinge size: 42 x 20 x 13 mm (W/H/D)Bushing size: 9 x 8 mmGlass thickness: 6 mm

Item No. # 15.06.060

Packing:70 pairs per carton

MODEL MEDIUM




Item No. # 15.06.062


MODEL LARGE




Item No. # 15.06.064


6,2

2 2

6

3

11

11

20

7

24 42

30

8

9 9

7,2

2 2

7

3

11

26

8

34 52

40

9

10 12

7,2

2 2

7

3

11

35

8

48 71

59,5

9

10 13

GLASS PIVOT HINGE STAINLESS STEEL- NO DRILLING


56

GLASS DOOR HINGE A-11- NO DRILLING

MODEL w/CatchNO. A-11 inset doors

Material: ZamakChrome plated # 15.06.126Brass plated # 15.06.120Black anodized # 15.06.127

Mounting:Inset doors, max 5-6 mmSide fixation

Front plate:Size: 25 x 25 mm - framed& sparkled

Matching handle:# A-10

Packing:Each pair (Right + Left)incl. pads/cushions is packedin a polybag200 pairs per box

(Optional)

GLASS PIVOT HINGE BRASS - NO DRILLING

6,2

3 3

6

1

10

11

27

8

23 40

29

10

8 10


Material: 3 mm brass

Hinge size: 42 x 27 x 16 mm (W/H/D)

Bushing size: 8 x 11 mm


Chrome plated # 15.06.070Alu finish # 15.06.071


57

MODEL w/CatchNO. 11.100 inset doors

Material: ZamakChrome plated # 15.06.025

Mounting: Side fixationInset doors, max 4-6 mmMax door size: 800 x 350 mm- 4 kilos

Front plate:Size: 27 x 23 mm, sparkled

Matching handle:# 11.200

Packing:Each pair (Right + Left)incl. pads/cushions is packedin a polybag40 pairs per box200 pairs per export carton

GLASS DOOR HINGE 11.100- NO DRILLING

GLASS DOOR HINGE D-13/2- NO DRILLING

MODEL w/CatchNO. D 13/2 inset doors

Material: ZamakChrome plated # 15.06.102Bronze plated # 15.06.103Black anodized # 15.06.105

Mounting:Inset doors, max 5 mmMax door size 1000 x 600 mm

Front plate:Size 40 x 30 mm sparkled

Maching handle:# D-12, D-12/2, D-120

Packing:Each pair (right + left) incl. pads/cushionsis packed in a polybag50 pairs per box200 pairs per export carton


58

GLASS DOOR HINGE C-13 CENTER- NO DRILLING

MODEL w/CatchC-13 INSET DOORS

Material Zamak L/RChrome plated # 15.06.311/321Brass plated # 15.06.310/320Bronze plated # 15.06.312/322Black anodized # 15.06.313/323

MountingInset doors, max 5 mmCentre- or Top fixation forrounded doors

Front plateSize: 40 x 30 mm - framed& sparkled

Matching handle# D-12, D-12/2 & D-120

Packing100 pairs per box400 pairs per export carton

GLASS DOOR HINGE D-16 - NO DRILLING

MODEL w/CatchD-16 OVERLAY DOORS

MaterialZamak

FinishChrome plated # 15.06.415Brass plated # 15.06.410Black anodized # 15.06.420

MountingOverlay doors, max 5 mm

Front plateSize: 40 x 30 mm, sparkled

Matching handle# D-12, D-12/2 & D-120

PackingEach pair ( Right + Left)incl. pads/cushions is packedin a polybag150 pairs per box


59

GLASS DOOR PULL F/SLIDING DOORS

5

MODEL w/Clamp ScrewA-10 SINGLE DOORMaterial: ZamakChrome plated # 17.40.032Brass plated # 17.40.030Black anodized # 17.40.031Packing:500 pcs per export carton

MODEL w/Clamp Screw11-200 SINGLE DOORMaterial: ZamakChrome plated # 17.40.011Packing:500 pcs per box

MODEL w/Clamp ScrewD-120 DOUBLE DOORSMaterial: ZamakChrome plated # 17.40.041Brass plated # 17.40.040Bronze plated # 17.40.042Black anodized # 17.40.046Finish: SparkledPacking:50 pcs per box400 pcs per export carton

GLASS DOOR HANDLE - NO DRILLING

GLASS DOOR PULL FOR SLIDING DOORS

Material: Brass 30 x 9 mm - bore 26 mmFinishChrome plated # 17.40.100Alu finish # 17.40.101Mat nickel # 17.40.102Polish brass # 17.40.103Satin brass # 17.40.104

Material: Brass 43 x 9 mm - bore 35 mmFinishChrome plated # 17.40.110Alu finish # 17.40.111Matt nickel # 17.40.112

For glass thickness 4 - 8 mm

30

MODEL w/Clamp ScrewD-12/2 SINGLE DOORMaterial: ZamakChrome plated # 17.40.018Black anodized # 17.40.017Finish: SparkledPacking:50 pcs per box400 pcs per export carton


60

ApplicationFixing of mirrors. No drilling in glass required

Consists of2 spring loaded top clips & 2 fixed bottom clips

Glass thickness5 mmScrew holes 5 mm

FinishSteel, nickel plated # 22.05.100Stainless steel 304 # 22.05.105

Packing400 sets per cartonW/screws and wall plugs

MIRROR MOVEMENT NO. 88

MIRROR OR GLASS CLIP

SHALLOW MIRROR CORNERS

MIRROR CLIPS W/SPRING

Application For turnable mirrors w/wood frame

MaterialSteel

Screw holes 4 mm

FinishBrass plated # 22.05.050Bronze plated # 22.05.051Nickel plated # 22.05.052

Packing: 200 sets per carton

18

15

18

23

29 40 51

2

ApplicationFor safe mounting of mirrors or other glass panels of 4 mm thickness

MaterialPlastic transparent

Screw holes 3 mm

Item No. # 22.05.200

Optionalso available for other glass thick-ness upon special request or inquiry. Other colour available.

13

63

63

glass

door

ApplicationFor mounting of mirrors

MaterialSteel

Size: 22 x 22 mm

Item No.: Nickel plated # 22.05.070Brass plated # 22.05.071

3

0,6

6

22

12

door

32

25

10

12

6

29

10

632

2825


61

ApplicationMounting of signboards, mirrors etc.

MaterialAluminium

Mounting 4 mm screw hole

13 x 13 mm Panel thickness: 2 - 6 mmAnodized # 22.11.110Red # 22.11.111Blue # 22.11.112Gold # 22.11.113Black # 22.11.114Alu polished # 22.11.115

13 x 19 mmPanel thickness: 2 - 8 mmAnodized # 22.11.120Red # 22.11.121Blue # 22.11.122Gold # 22.11.123Black # 22.11.124Alu polished # 22.11.125



All signboard screws are supplied w/2 transparent washers

19 24

18

13

13 x 13 mm 13 x 19 mm 19 x 25 mm

M8M8 M10

M10

19

25 31

24

13 18

12

13

4 5

25 x 30 mm 25

30 36

29

5

SIGNBOARD SCREWS ALU

SIGNBOARD SCREW SS W/CSK HEADApplicationMounting of signboards, mirrors etc.

FeaturesCounter sunk head with snake eyes

MaterialStainless steel 304

Mounting8 x 14 mm screw hole

20 x 28 mmPanel thickness: 8 - 12 mmSS 304 # 22.11.150

32 x 28 mm Panel thickness: 8 - 12 mmSS 304 # 22.11.152

All signboard screws are supplied with black plastic washers

20 28 8

20 or 32 14


62


MaterialBrass


13 x 19 mm Panel thickness: 2 - 10 mmChrome plated # 22.11.000SS-look # 22.11.001

19 x 25 mmPanel thickness: 2 - 15 mmChrome plated # 22.11.050SS-look # 22.11.051

25 x 25 mm Panel thickness: 2 - 15 mmChrome plated # 22.11.100SS-look # 22.11.101

All signboard screws are supplied w/2 transparent washers

19

25 31

22,5

13

M10 M10M8

25

25 31

22,5

19 23

19

5 5


MaterialBrass


25 x 20 mm Panel thickness: 6 mmChrome plated # 22.11.200SS-look # 22.11.201

30 x 20 mmPanel thickness: 6 mmChrome plated # 22.11.210SS-look # 22.11.211

25

1220 20

128 6 69

M6

M6 M6

30

SIGNBOARD SCREWS

SIGNBOARD HOLDERS


63

Alu sign board screws w/LED lightF/ 2- 12 mm glass or acrylic platesWhite or blue light incl. 2 mtr. LED cableTransformer with 150 cm cable w/euro-plugSize 25 x 25 mm.Polished chrome or alu-look finishIn sets of 2 or 4 sign board screws

Quantity: Finish: Led light: Item No.: Set of 2 pieces Chrome Blue # 22.11.316 Set of 2 pieces Chrome White # 22.11.318 Set of 2 pieces Alu Blue # 22.11.321 Set of 2 pieces Alu White # 22.11.323 Set of 4 pieces Chrome Blue # 22.11.331 Set of 4 pieces Chrome White # 22.11.333 Set of 4 pieces Alu Blue # 22.11.336 Set of 4 pieces Alu White # 22.11.338

ALU SIGN BOARD SCREWS W/LED LIGHT

25

23,50

6

2-12 mm. glass

ALU CLAMPS W/LED LIGHT

Alu clamps w/LED lightF/ 8mm glass or acrylic platesWhite light incl. 2 mtr. LED cableTransformer with 150 cm cable w/euro-plugSize from 80 mm to 380 mm.Polished chrome or alu-look finish

Size: Finish: Led light: Item No.:80 mm Chrome White # 22.11.30080 mm Alu finish White # 22.11.302120 mm Chrome White # 22.11.303120 mm Alu finish White # 22.11.305180 mm Chrome White # 22.11.306180 mm Alu finish White # 22.11.308280 mm Chrome White # 22.11.309280 mm Alu finish White # 22.11.311380 mm Chrome White # 22.11.312380 mm Alu finish White # 22.11.313

25

25

116

8


64

ALUMINUM SHELF W/LED & GLASS PLATE

Item No.:450 x 175 x 70 mm F/8 x 443 mm glass # 22.02.701500 x 175 x 70 mm F/8 x 493 mm glass # 22.02.702600 x 175 x 70 mm F/8 x 593 mm glass # 22.02.703900 x 175 x 70 mm F/8 x 893 mm glass # 22.02.7041200 x 175 x 70 mm F/8 x 1193 mm glass # 22.02.705

ALUMINUM PROFILE WITHOUT LED & GLASS PLATE

SUCTION PADS & BUMPERS

SpecificationsTempered frosted 8mm glass plateWhite LED lamps 6000KFrom 450 to 1200 mm length.Complete with 1,5 m cable (no plug)Maximum load 3 kgBuilt-in grey on/off switchLED driver built into the profile. Input: 200 - 240V, 50 Hz.IP20 rated, RoHS complaint & CE certified

Item No.:450 x 175 x 70 mm 24 SMD LEDs 2,0w # 22.02.710500 x 175 x 70 mm 27 SMD LEDs 2,2w # 22.02.711600 x 175 x 70 mm 33 SMD LEDs 2,7w # 22.02.712900 x 175 x 70 mm 51 SMD LEDs 4,1w # 22.02.7131200 x 175 x 70 mm 69 SMD LEDs 5,6w # 22.02.714

BUMBER DISCS SELF ADHESIVEMaterialPVC, transparent colorApplicationSelf adhesive bumbers are the ideal solution to avoid scratching surfaces, prevent objects from skidding orvibrating, cushioning the closing of doors and drawers & equalizing height differencesTipAvoid using the bumber discs for at least 24 hours after mounting to guarantee maximum adhesion

SUCTION PADS W/HOLLOW PIN

MaterialPVC, transparent color

ApplicationFor glass table topsHollow pin

SUCTION PADS W/BALL PIN

MaterialPVC, transparent color

ApplicationFor glass table topsBall pin

A

B

# 10.39.010 Transparent 7 1,5 mm# 10.39.015 Transparent 8 1,6 mm# 10.39.020 Transparent 10 1,5 mm# 10.39.030 Transparent 10 3,0 mm# 10.39.040 Transparent 13 4,0 mm

Bheight

Adiameter

Itemnumber Color

# 10.38.210 15 10 mm 4 mm 6# 10.38.220 20 8,5 mm 6,5 mm 6

Bheight

Cheight

Adiameter

D

B

C

A

Ddiameter

Item number

Item number

# 10.38.310 20 10 mm 4 mm 6# 10.38.312 30 13 mm 5 mm 8

Bheight

Cheight

Adiameter

D

B

C

Ddiameter

A


65

ApplicationTable legs for glass table tops.With adjustable glide.

MountingUV-Glue

Material Steel, chrome plated legsStainless steel mounting plateBlack plastic adjuster

38 x 400 mm # 06.10.07060 x 710 mm # 06.10.100

Packing4 legs = 1 set

Description:To be used with table legs mounted on glass table tops

For legs with M8 bolt

Item No: 38 x 10,5mm # 06.10.064 50 x 10,5mm # 06.10.065 60 x 10,5mm # 06.10.066

400710

3860

UV-Glue

Stainless steelplate

38

50

60

7,87,87,810,5 10,5 10,5

3 - 0,5x45 3 - 0,5x45 3 - 0,5x45

1 1 1

M8 x 7,8 M8 x 7,8 M8 x 7,8

STAINLESS STEEL DISCS F/TABLE LEGS F/UV GLUE

TABLE LEG F/GLASS TABLE TOPS


66

SHELVING LEG SYSTEM THE POST

50

30

3

The PostShelving leg system. Can be used for shelving, storage or display purposes. Office shelves, desk shelf, shop fittings, movable trade fair displays, entertainment centres.Easy assembly and dis-assemblyReconfigurable

Mounting clip Zamak # 22.30.000for wood Aluminium finish

Foot plug Black plastic # 22.30.001

Mounting plug clip Black plastic # 22.30.002

Mounting plate Stainless # 22.30.003for glass Steel

Aluminium bar Aluminium # 22.30.004of 2 meters anodized

Mounting instruction for glass topsThe stainless steel plate is first glued to the zamak mountingclip by use of BOHLE UV-Glue B 682-0 together with BOHLE UV-Activator B 953-0. UV-lamp is not needed.

After the 2 parts are glued together the stainless steel plateis glued to the glass plate by use of BOHLE UV-Glue B 682-0.UV-lamp is needed.

The Post - Connector detail

Kitchens

Extrusion illustration of The PostMounting

plate f/glassMounting

clip f/woodMounting plug clip

Aluminium bar

Foot plug

1. Screw connectors intodesk/bench and shelf and

place posts on connectors

2. Place shelf on posts

Assembly

3. Twist posts until it locks click, simply twist

to unlock

The Post for glass

Set f/glass


67

Model SLOVAKIA

Opening: 180.Load capacity: 20 kg per hinge.Glass thickness: 6-8 mm.Max glass width: 1000 mm.

One hinge consists of:1 zamak mounting plate 15 x 84 mm. 3 CSK screw holes 5 mm. c/c 70 mm.1 zamak hinge body 60 x 55 mm.1 stainless steel connecting pin. 2 plastic bushings.1 stainless steel tightening screw M8 x 20 mm.1 transparent height adjustment washer. Bore hole 20 mm.1 transparent protection ring. Bore hole 16 mm. 3 plastic cover caps.

FinishBrown powder painted # 15.25.050Chrome plated # 15.25.051Aluminium look # 15.25.052 Satin nickel plated # 15.25.053 White powder painted # 15.25.054

06 480 7 C-

C51

75

5.92 .niM

19

61

CUSHION PLATE

55

7,5

SAUNA HINGE F/GLASS DOORS W/MOUTING PLATE

Model TREBISOV

Opening: 180.Load capacity: 20 kg per hinge.Glass thickness: 6-8 mm.Max glass width: 1000 mm.

One hinge consists of:2 steel cylinders 15 mm w/ M8 x 40 mm pins for door frame mounting. c/c. 45 mm. 1 zamak hinge body 60 x 55 mm.1 stainless steel connecting pin.2 plastic bushings.1 stainless steel tightening screw M8 x 20 mm. 1 transparent height adjustment washer. Bore hole 20 mm. 1 transparent protection ring. Bore hole 16 mm.3 plastic cover caps.

FinishBrown powder painted # 15.25.000Chrome plated # 15.25.002Aluminium look # 15.25.001 Satin nickel plated # 15.25.003 White powder painted # 15.25.004

CUSHION PLATE

60 65,6

C-C

45

011

Min

. 29.5

15

5.7

16

04

55

53

SAUNA HINGE F/GLASS DOORS - PIN MOUTING




68

HEIGHT ADJUSTMENTWASHER INSTRUCTION

MOUNTNING INSTRUCTION F/GLASS DOOR HINGE MODEL SLOVAKIA & TREBISOV

4,5 mmHeight

adjustment

2,25 mmSide adjustment

1. Assembly with adjustment washerRecommendation 1Bore hole 20 mm

3. Assembly with protection ringBore hole 16 mm

Side adjustment4,5 mm

2,25 mmHeight

adjustment

2. Assembly with adjustment washerRecommendation 2Bore hole 20 mmTransparent plastic

height adjustment washer

Transparent rubber protection ring

24,58,5 55

16

Screw M8 x 20Wood frame

7Glass 6 - 8 mm thicknessMax width 70 cmMax weight 40 kg

20 mm(1+2. Assembly with adjustment washer 16 mm(3 Assembly with protection ring)

40

15

Rubber2 mm thickness

Rubber2 mm thickness

24,5


69

Model BELARUS

Opening: 180.

Load capacity: 20 kg per hinge.

One hinge consists of

2 steel cylinders 15 mm

w/ M8 x 40 mm pins for door frame

mounting. c/c 44 mm.

1 steel cylinder 15 mm

w/ M8 x 50 mm pin for door mounting.

1 stainless steel connecting pin.

2 plastic bushings.

2 plastic cover caps.

1 safety screw M4.

Colour

Brown powder painted # 15.25.080

(other colours on request)

8.52

15

61

15

SAFETY SCREW M4

43,5

35

8M

8M

0644

40

50

SAUNA HINGE F/WOODEN DOORS - PIN MOUTING

Model ESTI

Opening: 180.

Load capacity: 20 kg per hinge.

One hinge consists of

1 zamak mounting plate 15 x 84 mm.

3 CSK screw holes 5 mm. c/c 70 mm.

1 steel cylinder 15 mm w/ M8 x 50 mm

pin for door mounting.

1 stainless steel connecting pin.

2 plastic bushings.

2 plastic cover caps.

1 safety screw M4.

Colour

Brown powder painted # 15.25.070

(other colours on request)

SAUNA HINGE F/WOODEN DOORS W/MOUTING PLATE

8.52

15

SAFETY SCREW M4

8M35

4051

5 mm

91

84

60,50

70


70

Model SUOMI

Opening: 130.Load capacity: 20 kg per hinge.Glass thickness: 6-8 mm.Max glass width: 1000 mm.2 bore holes 12 mm for extra safety. 40 mm distance from centre of bore hole to edge of glass door.

One hinge consists of1 zamak mounting plate 25 x 50 mm. w/3 CSK screw holes 5 mm. c/c 32mm.1 zamak hinge body 49,5 x 49,5 mm.1 stainless steel connecting pin. 2 plastic bushings.1 safety screw M4.2 stainless steel tightening screws M8 x 12 mm c/c 25 mm.

Item No. Brown powder painted # 15.25.060Chrome plated # 15.25.061Aluminium finish # 15.25.062 SS-look # 15.25.063 White powder painted # 15.25.064

Closed

Opening130 degree

96

6.94

5.93 .niM

23

49.5 12

2.81 .niM

52

5 mm

EMERY CLOTH

SAFETY SCREW M4

40

GLASS DOOR

SAUNA HINGE F/GLASS DOORS - CRANKED

Model UKRAINE

Size85 x 41 mm

MaterialZamak house & stainless steel spring

Pulling power13 -15 kg.

ColourBrown powder painted (other colours on request)

Item No. Brown powder painted # 15.25.020Chrome plated # 15.25.021Aluminium finish # 15.25.022 SS-look # 15.25.023 White powder painted # 15.25.024

SAUNA DOOR CATCH

66,8

19 41

85

5945


71

2220

29

8,5

48

0-7,5

59

Roller can be adjusted by turning the screw

36

Bore

SAUNA DOOR CATCH ROLLERW/STRENGHT ADJUSTMENT FUNCTION

MAGNET SCREW WITH 14 MM HEX HEADSize M6 x 22 mmMaterial Steel Finish Nickel platedPulling power 9,5 kgItem No. # 15.25.010

CATCH PLATE:Size 35 x 27 mm.Material Steel

FinishW/1 mm cushion for 8 mm glass thickness: Aluminium look # 15.25.013Nickel plated # 15.25.015Chrome plated # 15.25.017

FinishW/2 mm cushion for 6 mm glass thickness:Aluminium look # 15.25.014Nickel plated # 15.25.016Chrome plated # 15.25.018

35

27

7,7

8,5

28

M6 22

MAGNET SCREW WITH 14 MM HEX HEAD

Model DANIA

ApplicationFor sauna doors

MountingInset hole 29 x 36 mm c.c. 48 mm

MaterialZamak housing & plastic roller

FunctionBy turning in the screw the depthof the roller can be adjusted from 0 - 7,5 mm

Item No.Brown # 15.25.031Chrome plated # 15.25.030


72

GLASS DOOR HINGE BONN ALUMINUM ANODIZED

85

130 5

43

130

124

5

12

28

58M4

19,7

13,4

51

6+0,050

261

45

C10

C0,5

12,5

85,5

460

,05

2x7,82x10

47

0,8

85,5

47

0,8

2xR9

85,5

43

0,8

2xR9

85,5

43

0,8

85,5

Application:Can be used for left & right hand doors

Opening: 180Load Capacity: 45 kg pr. hingeGlass thickness: 8 - 10 mmMax glass width: 1000 mmDrillling: 12 mm

One hinge consists of1 aluminum mounting plate 28 x 124 mm w/3 CSK screws holes 6,5 mm1 aluminum hinge body 43 x 130 mm1 aluminum back cover plate 42 x 85 mm4 gaskets in 1 mm thickness3 stainless steel wall mounting screws M6 x 30 mm3 steel expansion wall plugs 8 x 24 mm.

Item No. #15.25.035

Description:Glass door aluminium hinge, wall/glass for 6-10mm glass, without cover plates (to be ordered seperately).

Load capacity: 45 kg pr. pair.

Finish:SS-Look or Alu-Look

Item No:Glass door hinge Alu-Look # 15.30.002-0Glass door hinge SS-Look # 15.30.002-9

Seperate cover caps SS-304 (set with 2 pcs):Cover Caps, Round, Alu-Look # 15.30.003Cover Caps, Square, Alu-Look # 15.30.004Cover Caps, Round, SS-Look # 15.30.005Cover Caps, Square, SS-Look # 15.30.006

GLASS DOOR HINGE RIGA


73

65

100

55

27,7 93,7

15

50

85

83,4 0,8

6,5 0-0,2

48,4 50

89

88,20,8

6,5 0-0,2

48,4 50

85

83,4 0,8

6,5 0-0,2

48,4 50

89

88,20,8

6,5 0-0,2

48,4 50

4 500

Description:Glass door aluminum hinge, wall/glass for 6 - 10 mm glass.Without cover plates (to be bought seperately)

Load capacity: 45 kg pr. pair

Item No:Glass door hinge SS-Look # 15.30.010Glass door hinge Alu-Look # 15.30.012

Separate cover plates SS-304 (set with 2 pieces):Cover caps, Round, SS-Look # 15.30.013Cover caps, Square, SS-Look # 15.30.014Cover caps, Round, Alu-Look # 15.30.017Cover caps, Square, Alu-Look # 15.30.018

GLASS DOOR HINGE GRAZ

,4 500


74

SHOWER DOOR HINGE TEX

ApplicationSuitable for glass door/shower doorsDrilling/cutting requiredW/angle adjustment functionW/25 return function (self-centering)Opening: 90Max glass width: 800 mmLoad capacity: 18 kg per hingeGlass thickness: 6-10 mmMaterialBrass1 hinge consists of1 hinge 90 x 55 mm1 mounting plate 4 x 90 x 50 mm2 hex screws 4 mm1 L-shaped 4 mm hex key2 transparent cushions 1 mm thickness2 transparent cushions 1,5 mm thickness2 screws w/2,5 mm hex1 L-shaped hex key 2,5 mm3 wall plugs3 wall screws1 drilling/cutting templateFinishSS-look # 15.24.010Alu-finish # 15.24.011Chrome plated # 15.24.012Packing20 pcs per carton

Hex 4

4457

63

3338

16

35

13

50

5,5

70

63

554

90

glass 6 - 10 mm

ApplicationSuitable for glass door/shower doorsDrilling/cutting requiredW/angle adjustment functionW/25 return function (self-centering)Opening: 90Max glass width: 800 mmLoad capacity: 18 kg per hingeGlass thickness: 6-10 mmMaterialBrass1 hinge consists of 1 hinge 90 x 55 mm1 mounting plate 4 x 90 x 50 mm2 hex screws 4 mm1 L-shaped 4 mm hex key2 transparent cushions 1 mm thickness2 transparent cushions 1,5 mm thickness2 screws w/2,5 mm hex1 L-shaped hex key 2,5 mm4 wall plugs4 wall screws1 drilling/cutting templateFinish SS-look # 15.24.000Chrome plated # 15.24.002Alu-finish # 15.24.001Packing20 pcs per carton

Hex 4

Hex 2,5

4457

63

3338

16

35

50

5,5

70

64

55

glass 6 - 10 mm

4

90

SHOWER DOOR HINGE TEX W/OFF CENTRE MOUNTING PLATE


75

SHOWER DOOR HINGE TEXGLASS TO GLASS 180

SHOWER DOOR HINGE TEXGLASS TO GLASS 90

ApplicationSuitable for glass door/shower doorsDrilling/cutting requiredW/angle adjustment functionW/25 return function (self-centering)Opening: 180Max glass width: 800 mmLoad capacity: 18 kg per hingeGlass thickness: 6 - 10 mm

Material Brass

1 hinge consists of1 hinge 90 x 55 mm1 glass wall fixing plate 90 x 55 mm4 hex screws 4 mm1 L-shaped 4 mm hex key4 transparent cushions 1 mm thickness4 transparent cushions 1,5 mm thickness2 screws w/2,5 mm hex1 L-shaped hex key 2,5 mm1 dril

Date post:	23-Nov-2015
Category:	Documents
Upload:	bolnavu
View:	110 times
Download:	1 times

SISO Glass Fittings

Documents