© 2020 Signature Kitchen Suite. All rights reserved. Design, features and speci� cations are subject to change without notice. Speci� cations are for planning purposes only. Consult the product’s installation instructions for � nal dimensional data and other details prior to making cutouts or custom panels. Consult with a heating and ventilation engineer for your speci� c ventilation requirements. Non-metric weights and measurements are approximate. Smart features require Internet access. 1-855-790-6655 | www.signaturekitchensuite.com

Page 1 of 4 | Effective 7/20 | WCAG

InnovationWi-Fi Enabled for ThinQ™ Monitoring with iPhone / Android App

Yes

Remote Monitoring YesCombine Flex Cooking Zones Into One Large Zone

Yes

Cooktop FeaturesFrameless Design YesCooktop Surface Clear Glass,

Black PrintNumber of Elements 5Control Type Touch ControlsDisplay 7" TFT LCDControl Lock YesHot Surface Indicator YesElement Size (inches)

Front (Left & Right) 8 1/2 x 7 1/8Rear (Left & Right) 8 1/2 x 7 1/8Flex Zone (Left & Right) 8 1/2 x 14 3/16Dual Zone Center 11 / 7

Pan Sensor Yes

Cooktop PerformanceFront (Left & Right) / Boost 1,850 / 3,700 WRear (Left & Right) / Boost 1,850 / 3,700 WFlex Zone (Left & Right) / Boost 3,300 / 3,700 WDual Zone Center / Boost 3,700 / 7,000 W

POWERFUL CENTER ELEMENTWith 7,000 watts of power, the 11-inch dual center element is the most powerful center induction element in the industry*. This element can boil one quart of water in about a minute.

TWO FLEX COOKING ZONESFrom a small pan to a large griddle, each Flex Cooking Zone combines elements to accommodate different sizes and shapes of cookware. Each zone provides up to 3,700 watts of power.

PROUD/FLUSH INSTALLATIONThe cooktop can be installed proud, allowing quick and easy retro-fit installation. A flush-mount installation provides a sleek appearance that blends seamlessly with countertops.

LCD TOUCH CONTROL7-inch color LCD touch control allows for easy interface and use. The seamlessly integrated display is also easy to clean.

WI-FI ENABLED FOR SMART CONTROL The innovative Wi-Fi feature, powered by ThinQ™ Technology, brings modern convenience to the kitchen. Monitor the on/off status of the cooktop elements from a mobile device using the Signature Kitchen Suite™ app. When combined with a Signature Kitchen Suite Pro-Style Hood, ThinQ™ Technology lets the cooktop and hood communicate with each other so the elements and fans are synchronized.

*Among leading brand 36" induction cooktops when pots over 9" are used.

SKSIT3601G36-INCHFLEX INDUCTION COOKTOP

Page 2 of 4 | Effective 7/20 | WCAG

*These warranties give you speci� c legal rights and you may have other rights that vary from state to state. For complete warranty details, refer to your Use & Care manual.

STANDARD INSTALLATION

30 Min.(762 mm)

R 10

Technical SpecsEnergy Source ElectricWatts 11,100 / 9,000

W (240 / 208V)Required Power Supply 240 / 208V,

60 Hz, 50 AmpPlug Type No PlugConduit 64 1/8"

Flexible 3-Wire

Dimensions and WeightOverall Width (inches) 36 5/8Overall Height (inches) 3 9/16Overall Depth (inches) 21 1/16Net Weight (approx.) 47.6 lbs.Shipping Weight (approx.) 54.5 lbs.

Warranty Summary*Limited Warranty, Parts & Labor 3 Years

SKSIT3601G36-INCHFLEX INDUCTION COOKTOP

PRODUCT DIMENSIONS

30" min.(762 mm)

Radius

36 5/8" (930 mm)

33 7/8" (860 mm)

21 1/16"(535 mm)

(490 mm)

19 5/16"

3/8"(10 mm)

3 9/16" (91 mm)

3 9/16" (91 mm)

Height of conduit: 1 1/8"

Right side

(29 mm)

2 7/16" (62 mm)

4" x 8" (102 mm x 203 mm) opening toroute armored cable if panel is present

34 3/8"m m )

(873

610 m24" min. (

m)

19 13/16" (503 mm)

2 3/16" min. (55 mm)

2 1/16" min. (52 mm)

4 1/4"(108 mm) 1 1/8" min.

(28 mm)

Page 3 of 4 | Effective 7/20 | WCAG

FLUSH INSTALLATION – CLEAT OPTION

FLUSH INSTALLATION

SKSIT3601G36-INCHFLEX INDUCTION COOKTOP

4" X 8" (102 mm x 203 mm)opening to route armoredcable if panel is present.

CUTOUT DIMENSIONS

CUTOUT DIMENSIONS – FLUSH INSTALLATION

30" min.(762 mm)

Radius

36 5/8" (930 mm)

33 7/8" (860 mm)

21 1/16"(535 mm)

4919 5/1

mm)6"( 0

3/8"(10 mm)

3 9/16" (91 mm)2 7/16" (62 mm)

4" x 8" (102 mm x 203 mm) opening toroute armored cable if panel is present

1/4" (7 mm)

Right and left sideRight

36 7/8"m(936 m )

1 7/16" min. (36 mm)

1 5/16" min. (33 mm)

1 1/8" min. (28 mm)

3/4" (19 mm)

1/4" (7 mm)

1 1/4" (32 mm)

Radius

1/2"(13 mm)

4 17/32"(115 mm)

3 9/16" (91 mm)

Height of conduit: 1 1/8" (29 mm)

21 5/16" (541 mm)

Front andback side

Right side

610 m24" min. (

m)

Notes

The countertop should be routed to the pro� les indicated for � ush installation. L-shaped supportcleats may be usedas an alternative.

• All dimensions are stated ininches and millimeters (mm).

CLEAT OPTIONFor this installation, the countertop cut-out will be the same sizeas the outer edge of the cooktop glass.

Attach L-shaped cleats to the perimeter of the countertop cut-out.

The top edge of the cleat will be attached 1/4" (7 mm) below thesurface of the countertop.

Refer to the Illustration below. Attach the cleats to the countertop.

Consult a countertop supplier for proper methods of attachment.

L-shaped support cleat

Countertop CooktopL-Shaped Cleat

3/4" (19 mm)

1/4" (7 mm)

L-shaped cleat (Front and Back)

1

23

1 1/4" (32 mm)

1/4" (7 mm)

L-shaped cleat (Right and Left)

1

23

1

2

3

Page 4 of 4 | Effective 7/20 | WCAG

INSTALLATION CLEARANCES AND ELECTRICAL LOCATION

SKSIT3601G36-INCHFLEX INDUCTION COOKTOP

4" X 8" (102 mm x 203 mm)opening to route armoredcable if panel is present. Notes

Allow 2" (50 mm) space below the armored cable opening to clear the electric cable and allow space for installation of the junction box on the wall at the back of the cooktop.

CUTOUT DIMENSIONS

CUTOUT DIMENSIONS – FLUSH INSTALLATION

min. from edgeof cooktopto nearestcombustiblewall (eitherside of unit).

Empty space is needed underneaththe cooktop forinstallation purposes.

Approximate location ofjunction box.

12" (305 mm)

10″ (254 mm)

18″(457 mm)

36″ Min(914 mm)

24" Min(610 mm)

min. recommendeddistance betweenrear edge ofcutout and nearestcombustiblesurface.

Overhead cabinet should not exceed a maximum depth of 13″(330 mm).

RECOMMENDED SPACING BETWEEN COOKTOP AND DRAWER

CAUTION: It is very important to keep 3 5/16" (84 mm) distancebetween the cooktop and the drawer.

3 5/16"(84 mm)

5 3/4"(146 mm)

Drawer