A LEADERSHIP IN DRY COOLING TECHNOLOGIES
SPX DRYCOOLINGSYSTEMS
2
THE POWER FOR YOUR FUTURE
As the world grows, so does its need for electricity – and more sustainable energy production.
SPX Dry Cooling helps to meet that demand with a broad range of highquality, custom-engineered systems and compo-nents that can support improving efficiency and reducing the use of natural resources.
WHERE THE POWER IS
• SPX Dry Cooling power plant engineering components and systems are at work in gas, nuclear and coal-fired plants as well as in renewable energy applications, helping to optimize plant performance and reduce emissions.
• SPX Dry Cooling helps new and existing power plants to improve heat exchange efficiency, reduce water consumption and enhance flue gas systems performance.
• SPX Dry Cooling contributes expertise and equipment to build smarter, more efficient and more resilient power generation facilities.
POWER INFRASTRUCTURE
Design, manufacture and service highly engineered systems for gas, coal, solar, geothermal and waste to energy power generation plants.
Primary products:• Dry and Wet Cooling Systems • Air cooled Heat Exchangers
• World Technological & Innovation leader in the Dry domain with numerous patents and products
• More than 1.000 references of Dry coolers and condensers, spanning on all continents and under all climates
• Work force of 600+ professionals uniquely dedicated to the Dry business across the globe
• Member of Paharpur Group, a leading provider in Process Cooling Systems since 1948 with over 45.000 installations
3
Direct CoolingDirect and Indirect
CoolingDirect Cooling Direct Cooling
Direct Dry Cooling
SPX Dry Cooling is a leading global brand in Air-Cooled Condenser design, manufacturing, construction and services.
More than 1000 SPX Dry Cooling Systems for Combined Cycle, Coal, Natural Draft Condenser, Parallel Condenser System and Solar Power Plants have been installed around the world for a wide range of environmental conditions: coastal and desert climates, industrial and urban locations in both tropical and arctic temperatures.
SPX Dry Cooling, with its fully owned heat exchanger manufacturing plants, maintains a world class reputation of reliability and efficiency in power generation and industrial applications for large and small size plants.
Paharpur Group Renewable
Energy
Timber Products
Real EstateProcess
Cooling SolutionsFlexible
Packaging
Dry CoolingEvaporative
Cooling
Gas Coal SolarBiomass
WasteGeothermal
4
Combined Cycle Power Plants
Turano Lodigiano Italy800 MW
Alba Bahrain820 MW
Goreway Canada800 MW
Rio Bravo Mexico3 x 515 MW
CH
ALL
ENG
ES
• High operating flexibility• Operating cost• Diverse and challenging climates, from hot to freezing
conditions• Strict environmental imposition, including low noise
BEN
EFIT
S
• Elimination of additional water usage from the condensing power cycle
• Excellent corrosion and freeze resistance• Long-term mechanical and thermal integrity• Low fan power consumption• Flexibility in power plant site selection• Decreased time required for plant permitting
Concentrated Solar Power Plants
Hassi R’Mel Algeria150 MW
Ain Beni Mathar Moroco470 MW
Ivanpah USA 392 MW
Tonopah USA 125 MW
CH
ALL
ENG
ES
• High operating flexibility• Minimize operation and maintenance cost• Hot, arid and dusty enviornment with large solar
irradiation
BEN
EFIT
S
• Elimination of additional water usage from the condensing power cycle
• Long-term mechanical and thermal integrity• Low fan power consumption• Specific solution dedicated to solar tower systems
Biomass, Waste to Energy, Cogeneration Plants
Terras de Santa Maria Portugal35 MW
Prayon Belgium15 MW
Alkmaar Netherlands28 MW
Roosendaal Netherlands35 MW
CH
ALL
ENG
ES
• Low noise• Limited plot• Provide cost effective solution – reduce operating cost• Maximize air-cooled condenser performance
BEN
EFIT
S
• Elimination of additional water usage from the condensing power cycle
• Low noise product• Reduced height of air-cooled condenser• Reduced power consumption• Maintain performance in windy conditions• Low sensitivity to freezing• Flexibility in power plant site selection
5
Coal Fired Power Plants – Air-Cooled Condenser System
Zhenglan China2 x 600 MW
Wuxiang China2 x 600 MW
Wygen USA110 MW
Lanzhou Lanlü China3x300 MW
CH
ALL
ENG
ES
• Large capacity steam condensing for maximum electrical output
• Coal mine areas in dusty and corrosive environment• Diverse and challenging climates, from hot to freezing
conditions with risks of mechanical wear• Base load operation requiring high availability B
ENEF
ITS
• High efficiency thermal cycle with low back pressure and low power consumption for maximum heat rate
• High performance finned tubes with excellent cleaning ability for long term availability
• A-Frame supported tube bundles, allowing heat exchanger free thermal expansion for maximum reliability
COAL FIRED POWER PLANTS – INDIRECT DRY COOLING SYSTEM
Kendal South Africa6 x 690 MW
Zuoquan China2 x 660 MW
WuAn China2 x 300 MW
Qinling China2 x 600 MW
CH
ALL
ENG
ES
• Large capacity steam condensing for maximum electrical output
• Coal mine areas in dusty and corrosive environment• Diverse and challenging climates, from hot to freezing
conditions with risks of mechanical wear• Base load operation requiring maximum availability
and lowest operation costs
BEN
EFIT
S
• Low parasitic power requirements• Heat transfer performance ensured on the long run• Robust equipment requiring low maintenance• Fast and efficient assembly and installation
CANADA 1.470 MWMEXICO 4.240 MW USA 16.489 MWARGENTINA 240 MWPERU 1.630 MW VENEZUELA 1.000 MW AMERICANAS 25.069 MW
GANSU 2.800 MWHEBEI 1.860 MWHENAN 2,010 MWINNER MONGOLIA 18.580 MWJILIN 2.400 MWNINGXIA 2.400 MWSHANXI 19.105 MWSHAANXI 4.620 MWXINIANG 7.090 MW CHINA 60.865 MW
BANGLADESH 200 MWINDIA 20.120 MWINDONESIA 420 MWIRAN 600 MWJAPAN 330 MWKOREA 105 MWMALAYSIA 300 MWPAKISTAN 130 MWTAIWAN 2 .580 MWVIETNAM 250 MW
INDIA/APAC 25.035 MW
TOTAL : 150.650 MW (PROJECT > 100 MW)
BELGIUM 1.150 MWGREECE 550 MWIRELAND 790 MWITALY 6.532 MWLUXEMBURG 360 MW NETHERLANDS 570 MWSPAIN 1.100 MW UK 5.037 MW EUROPE 16.089 MW
ALGERIA 6,150 MW BARHAIN 800 MWISRAEL 1.720 MWJORDAN 1.217 MWMOROCCO 470 MWSOUTH AFRICA 8.980 MWSYRIA 660 MWTURKEY 760 MWSAUDI ARABIA 2.130 MW
AFRICA & 22.887 MW MIDDLE EAST
17 %
14 %
40 %
18 %
11 %
6
Direct Dry Cooling Systems (ACC)
Air Cooled Condenser (ACC)
Directly condenses the steam turbine exhaust flow and returns condensate to the boiler without water loss. The steam is directly condensed inside air-cooled finned tubes without using an intermediate surface condenser.ACCs are used in utility, industrial and renewables markets for large and small size plants. SPX Dry Cooling designs, manufactures and constructs traditional A-Frame ACC as well as our innovative Hexacool©® ModuleAir™, and Natural Draft Condenser using high efficiency SRC® finned tubes.
A-Frame ACC Features
Traditional A-Frame, with near than 1000 installations in the world, is the state-of-the-art ACC, suitable for small to large power plant in a large variety of site condition (low ambient temperature, high wind, high seism, low noise). SPX Dry Cooling, A-Frame ACC, with fee-expansion tube bundles supported by an A-Frame structure, can be mounted on concrete or steel structure.
Hexacool®
Hexacool is a standardized, modular ACC system for small power plants, from few megawatts to several hundred megawatts. Hexacool induced draft ACC is easy to construct, has a reduced height, and low wind sensitivity.
ModuleAir® ACC
ModuleAir is a modular SRC air cooled condenser design, featuring factory assembled structural components, duct, and modular heat exchanger bundles. With construction savings of up to 25% versus the conventional A-Frame ACC design, construction time can be reduced by several months for large power plants. ModuleAir can also achieve lower steam turbine back pressure and increase power production at low ambient air temperatures.
Natural Draft Condenser
Natural Draft Condenser is an air cooled condenser where fans are replaced by natural draft tower reducing drastically the electrical power consumption of the ACC and rotating parts needed.
Indirect Dry Cooling Tower (IDCT)
Indirect dry condensing system coupling a dry cooling tower with a steam surface or jet condenser and suited for any large capacity condensing units. Thanks to tall concrete shell, Hot air recirculation is avoided, the auxiliary is power reduced, and only a few rotating part are need. This translates into low maintenance and high availability.
Dry Cooling Advantages
• No need for water availability on site
• Environmental regulations for water saving
• Respect environmental regulations, limiting the temperature increase in rivers, lakes and oceans
• Flexibility in the selection of the power plant site (grid proximity, land cost, fuel source proximity)
• Life expectancy exceeding power plant life
• Reduced operation and maintenance cost
• Shorter lead-time for power plants permits and consequently for start-up
B
T G
Condensate
Hexacool
ModuleAir ACC
B
T G
Condensate Cooling water
7
Application Project Products Country MW Year
Gas Application
Combined CyclePower Plants
Ain Arnat Combined Cycle Power Plant Algeria 1200 2015
San Luis de la Paz Combined Cycle Power Plant Mexico 205 2014
Samra III Combined Cycle Power Plant Jordan 140 2014
Dominion – Warren County Combined Cycle Power Plant USA 1329 2013
Denizli Combined Cycle Power Plant Turkey 200 2012
Chilca Uno Combined Cycle Power Plant Peru 810 2011
Deer Creek Combined Cycle Power Plant USA 300 2011
Kallpa Combined Cycle Power Plant Peru 832 2011
Riyadh Combined Cycle Power Plant Saudi Arabia 1700 2011
Al Qatrana Combined Cycle Power Plant Jordan 400 2010
Torino North Combined Cycle Power Plant Italy 400 2010
Turano Lodigiano Combined Cycle Power Plant Italy 800 2009
Solar Application
Concentrated SolarPower Plants
Xina Solar One Solar Power Plant South Africa 100 2015
Paulputs - Kaxu Solar One Concentrated Solar Power Plant South Africa 115 2013
Genesis Solar Energy Project Solar Power Plant USA 250 2012
Upington Solar Power Plant South Africa 50 2012
Hassi R’Mel Solar Integrated Combined Cycle PP Algeria 150 2009
Renewables Application
Biomass, Waste to EnergyPower Plants
Lisahally Biomass Power Plant Ireland 40 2015
Palm Beach Waste Incineration Power Plant USA 150 2013
Sleaford Biomass Power Plant UK 38 2013
Riverside Waste to Energy Power Plant UK 243 2010
Dordrecht Waste to Energy Power Plant Netherlands 35 2009
Coal Application
ACC Coal FiredPower Plants
Babelan Coal Fired Power Plant Indonesia 280 2015
Fujian Henglian* Coal Fired Power Plant China 1320 2015
Tuyou 2* Coal Fired Power Plant China 1320 2015
Hami Danahu* Coal Fired Power Plant China 1320 2014
Tianye Coal Fired Power Plant China 660 2013
Wyodak Coal Fired Power Plant USA 330 2011
Rio Turbio Coal Fired Power Plant Argentina 240 2010
Zhenglan 3 Coal Fired Power Plant China 1200 2010
Coal Application
IDCT Coal FiredPower Plants
Yangling* Coal Fired Power Plant China 700 2015
Junzheng* Coal Fired Power Plant China 984 2014
Wu’an Coal Fired Power Plant China 600 2012
Qinling Coal Fired Power Plant China 1200 2011
Selected Dry Cooling References
* Shanghai Electric – SPX Engineering and Technologies Co. Ltd,
8
SPX Dry Cooling Belgium SPRLAvenue Marcel ThiryB-1200 BrusselsBelgiumT +32 (0)2 761 61 11
Paharpur Europe SAVia Laveggio, 3CH-6855 StabioSwitzerlandT +41 91 980 42 06
SPX Dry Cooling USA, LLC 7450 West 130th Street, Suite 310 Overland Park, KS 66213United States T +1 913 685 0009
Paharpur Cooling Towers Limited Paharpur House 8/1/B Diamond Harbour RoadKolkata 700027, IndiaT +91 33 4013 3000
SPX Dry Cooling Italia SRLLungolago di Calcinate 88I-21100 VareseItalyT +39 0332 150 5948
Paharpur SPX Dry Soğutma Tic. Ltd. Şti.Sair Esref Bulv. 22/81235210 Konak, İzmir, TurkeyT +90 (232) 483 07 79
SPX Dry Cooling USA, LLC 1200 US Rt. 22 East, Suite 1 Bridgewater, NJ 08807 United StatesT +1 908 450 8008
SPX Dry Cooling BeijingRoom 402, Block B, First Shanghai Center, No. 39 Liangmaqiao Road, Chao Yang District, Beijing 100125, ChinaT +86 10 5676 8368
SPX Dry Cooling SpainAvenida de Europa 1428108 Alcobendas, Madrid SpainT +34 911 890 518
SPX Dry Cooling - Paharpur Korea11F, Samsung Life Insurance Yoido Building24, Kukjegeumyung-Ro 2-Gil, Yeongdeungpo-Gu0732 Seoul, KoreaT +82 (0)2 6297 5030
Paharpur USADenver International Business Center 18300 East 71st Avenue, Suite 135Denver, CO 80249United States T +1 303 989 7200
Paharpur Nigeria FZEDangote Industries Free Zone Development CompanyLekki Coastal RoadIbeju-Lekki, Lagos, NigeriaT +41 78 754 17 41
EMEASPX Dry Cooling Belgium SPRLAvenue Marcel ThiryB-1200 BrusselsBelgiumT +32 (0)2 761 61 11
APAC AMERICAS SPX Dry Cooling USA, LLC 7450 West 130th Street, Suite 310 Overland Park, KS 66213United States T +1 913 685 0009
Paharpur Europe SAVia Laveggio, 3CH-6855 StabioSwitzerlandT +41 91 980 42 06
SPX Dry Cooling BeijingRoom 402, Block B, First Shanghai Center, No. 39 Liangmaqiao Road, Chao Yang District, Beijing 100125, ChinaT +86 10 5676 8368
SPX Dry Cooling USA, LLC 1200 US Rt. 22 East, Suite 1 Bridgewater, NJ 08807 United StatesT +1 908 450 8008
PAHARPUR & SPX DRY Soğutma Tic. Ltd. Şti.Sezer Dogan Sk. 20/1135210 Konak, IzmirTurkeyT +90 (232) 483 0 779
SPX Dry Cooling Korea11F, Samsung Life Insurance Yoido Building24, Kukjegeumyung-Ro 2-Gil,Yeongdeungpo-Gu, Seoul 07325KoreaT +82 (0)2 6297 5030
Paharpur USADenver International Business Center 18300 East 71st Avenue, Suite 135Denver, CO 80249United States T +1 303 989 7200
SPX Dry CoolingGLOBAL NETWORK
SPXDC-DC03 ©2018 SPX DRY COOLING
A Global Partner with the Promise of Excellence
Global Locations Paharpur Headquarters Kolkata
SPX Dry Cooling Headquarters Brussels
Manufacturing Plants
Joint Venture
EMEASPX Dry Cooling Belgium SPRLAvenue Marcel ThiryB-1200 BrusselsBelgiumT +32 (0)2 761 61 11
APAC AMERICAS SPX Dry Cooling USA, LLC 7450 West 130th Street, Suite 310 Overland Park, KS 66213United States T +1 913 685 0009
Paharpur Europe SAVia Laveggio, 3CH-6855 StabioSwitzerlandT +41 91 980 42 06
SPX Dry Cooling BeijingRoom 402, Block B, First Shanghai Center, No. 39 Liangmaqiao Road, Chao Yang District, Beijing 100125, ChinaT +86 10 5676 8368
SPX Dry Cooling USA, LLC 1200 US Rt. 22 East, Suite 1 Bridgewater, NJ 08807 United StatesT +1 908 450 8008
PAHARPUR & SPX DRY Soğutma Tic. Ltd. Şti.Sezer Dogan Sk. 20/1135210 Konak, IzmirTurkeyT +90 (232) 483 0 779
SPX Dry Cooling Korea11F, Samsung Life Insurance Yoido Building24, Kukjegeumyung-Ro 2-Gil,Yeongdeungpo-Gu, Seoul 07325KoreaT +82 (0)2 6297 5030
Paharpur USADenver International Business Center 18300 East 71st Avenue, Suite 135Denver, CO 80249United States T +1 303 989 7200
HEADQUARTERS
SPX Dry Cooling Belgium SPRLAvenue Marcel Thiry 81, B2B-1200 Brussels, BelgiumT +32 (0) 2 761 61 11F +32 (0) 2 761 61 86
[email protected] MEM BER OF
Denver, USA
Overland Park, USA
Mexico City, Mexico
Bridgewater, USA Stabio, SwitzerlandVarese, Italy
Madrid, Spain
Lagos, Nigeria
Brussels, Belgium
Kolkata, India
Shanghai, China
Seoul, Korea
Zhangjiakou, China
Baroda, India
Izmir, TurkeyBeijing, China