T u r n i n g Y o u r A ss e ts i n t o D o ll a r s Public Auction SURPLUS EQUIPMENT EVERYTHING MUST SELL! Asset Sales, Inc. Corporate Headquarters 301 Post Office Drive, Suite C Indian Trail, NC 28079 Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]European Headquarters 6 Hill End Close, Norwood Green Halifax, West Yorkshire, HX3 8RH Tel / Fax 07836.347880 [email protected]Asset Sales (Canada) Inc. 4310 Prospect Road Bayside, Nova Scotia, Canada B3Z 1L5 Tel 902.852.5331 Fax 704.821.4325 [email protected]EQUIPMENT SURPLUS TO THE CONTINUING NEEDS OF MANUFACTURED PRODUCTS & SUPPLY INC. LATE MODEL MAZAK, CNC , FABRICATION MACHINE SHOP & FACILITY 8706 DUDLEY ROAD - ABBEVILLE, LA 70510 THURSDAY, SEPTEMBER 17TH @ 10:00 A.M. CDT Inspection: Wednesday, September 16th From 8:00 A.M. - 4:00 P.M. CDT (2) MAZAK QUICK TURN NEXUS 250-II MY CNC TURNING CENTERS HAAS VF3 YT 4-AXIS CNC VERTICAL MACHINING CENTER HAAS TL-4 LARGE BORE CNC FLAT BED LATHE MAZAK SLANT TURN NEXUS 550 LARGE CAPACITY CNC TURNING CENTER 2008 2012 2 AVAIL. 2011 2011
Transcript
Turn
ing Your Assets into Dollars
Public AuctionSURPLUS
EQUIPMENTEVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
301 Post Office Drive, Suite CIndian Trail, NC 28079
8706 DUDLEY ROAD - ABBEVILLE, LA 70510THURSDAY, SEPTEMBER 17TH @ 10:00 A.M. CDT
Inspection: Wednesday, September 16th From 8:00 A.M. - 4:00 P.M. CDT
(2) MAZAK QUICK TURN NEXUS 250-II MY CNC TURNING CENTERS
HAAS VF3 YT 4-AXIS CNC VERTICAL MACHINING CENTER
HAAS TL-4 LARGE BORE CNC FLAT BED LATHE
MAZAK SLANT TURN NEXUS 550 LARGE CAPACITY CNC TURNING CENTER
2008
2012
2AVAIL.
2011
2011
MACHINERY INSPECTION DATE & TIME – WEDNESDAY, SEPTEMBER 16TH FROM 8:00 A.M. - 4:00 P.M. CDT
2
MAZAK SLANT TURN NEXUS 550 LARGE CAPACITY CNC TURNING CENTER
HAAS TL-4 LARGE BORE CNC FLAT BED LATHE
2011
2008
VERTICAL MACHINING CENTERHAAS Model VF-3YT 4-Axis CNC Vertical Machining Center with 23” x 52” Table, #50 Taper Spindle Speeds to 7500 RPM, 40" X-Axis Travel, 26" Y-Axis, 25" Z-Axis, 30 Side Head Automatic Toolchanger, Renishaw Intuitive Probing, Thru Spindle Coolant, High Intensity Lighting, Tool Holder Trays, HAAS CNC Control with Remote Pulse Generator, Macros, Rigid Tap, Rotational & Scaling, M19 Spindle Orientation & Chip Auger, sn:1097422, mfg.8/2012
4th AXISHAAS Model HRT310 4th Axis Rotary Table with 12” Faceplate & 3-Jaw Chuck, Tailstock, sn:317027, mfg.2012
CNC FLATBED, BIG BORE LATHEHAAS Model TL-4 Large Bore CNC Flat Bed Lathe with 24-1/2” Front & Rear Chucks, 10-3/4” Bore, 35” Swing Over Bedways x 91” Centers, 55 HP Spindle Speeds to 500 RPM, 2 Speed Gear Box, 10 Position Turret, Tailstock, Chip Guard, Steady Rest, HAAS CNC Control with Remote Pulse Generator, Rigid Tapping, Intuitive Programing, Spindle
Orientation, Coolant & Belt Chip Conveyor, sn:3083693, mfg.12/2008, Installed 2009
CNC TURNING CENTERS, BIG BORE, MILLING
MAZAK Slant Turn Nexus 550 Large Capacity CNC Turning Center with 24” Front & Rear Chucks, 12” Bore, 40.7” Maximum Swing, 35.8” Maximum Machining Diameter, Approx. 118” Centers, 12 Station Turret, 60 HP, Programmable Tailstock & SMW Steady Rest, High Power Coolant (1.1KW), MATRIX Nexus CNC Control & Chip Conveyor, sn:225395, mfg.2011
MAZAK Quick Turn Nexus 450 M CNC Turning Center with Milling, 20’ 3-Jaw Chuck, 6.5” Bore, 33” Maximum Swing, 23” Maximum Machining Diameter, Approx. 80” Centers, 12 Station Turret with Milling, 60 HP, Programmable Tailstock & Manual Steady Rest, Automatic Tool Eye, MATRIX Nexus CNC Control & Chip Conveyor, sn:182572, mfg.6/2006
MAZAK Quick Turn Nexus 350-II MY CNC Turning Center with Milling & Y-Axis, 12” Capacity to 15” 3-Jaw Chuck, 4.4” Bore, 29.5” Maximum Swing, 16.5” Maximum Machining Diameter, Approx. 60” Centers, 12 Station Turret with Milling & Y-Axis, 40 HP, Programmable Steady Rest, Automatic Tool Eye, High Power Coolant 213PSI, MATRIX Nexus CNC Control & Chip Conveyor, sn:217706, mfg.2/2010
MAZAK Quick Turn Nexus 350-II CNC Turning Center with 15” 3-Jaw Chuck, 4.4” Bore, 26.7” Maximum Swing, 16.5” Machining Diameter, Approx. 60” Centers, 12 Station Turret, 40 HP, Programmable Quill Tailstock, Automatic Tool Eye, High Power Coolant (59PSI), MATRIX Nexus CNC Control & Chip Conveyor, sn:199650, mfg.2008
(2) MAZAK Quick Turn Nexus 250-II MY CNC Turning Centers with Milling & Y-Axis, 10” 3-Jaw Chucks, 3” Bar Capacity, 26.5” Maximum Swing, 14.75” Maximum Machining Diameter, Approx. 20” Centers, 12 Station Turret with Milling and Y-Axis, 35 HP, Programmable Tailstock, Automatic Tool Eye, MATRIX Nexus CNC Control & Chip Conveyors, sn:231244, mfg.11/2011 ● sn:228821, mfg.11/2011
12"BORE
10 3/4"BORE
AUCTION SALE DATE & TIME – THURSDAY, SEPTEMBER 17TH @ 10:00 A.M. CDT
3
<HAAS VF-3YT 4-AXIS CNC VERTICAL MACHINING CENTER
<MAZAK QUICK TURN NEXUS 450 M CNC TURNING CENTER
Want to Sell Your Shop or Know
Someone Who Does? Call Us
Toll Free at (888) 800-4442!
We Pay Great Finder’s Fees!
2012
2006
<MAZAK QUICK TURN NEXUS 350-II CNC TURNING CENTER
2008
50 TAPER TOOLING
MAZAK TOOLHOLDERS
2AVAIL.
4AXIS
MACHINERY INSPECTION DATE & TIME – WEDNESDAY, SEPTEMBER 16TH FROM 8:00 A.M. - 4:00 P.M. CDT
4
ATTENDING THE AUCTION IN PERSON?
What you need to bring.....
• Your Driver’s License• Business Card
• Tax Exempt Form if Non Taxable• Bank Letter of Guarantee if Paying via Company Check
MAZAK TOOLHOLDERS
HAAS 4TH AXIS ROTARY TABLE
(2) MAZAK QUICK TURN NEXUS 250-II MY CNC TURNING CENTER
20112AVAIL.
<MAZAK QUICK TURN NEXUS 350-II MY CNC TURNING CENTER
2010
Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items.
Buyers May Pick Up Their Items at the Auction Location or Can
Arrange for a Third Party Logistics Firm to Manage the Removal Process
for Them.
2012
2AVAIL.
AUCTION SALE DATE & TIME – THURSDAY, SEPTEMBER 17TH @ 10:00 A.M. CDT
5
ENGINE LATHE, RADIAL ARM DRILL32” x 120” ACRA Model SET32120 Gap Bed Engine Lathe with 25” 4-Jaw Chuck, Approx. 6-1/4” Bore, Spindle Speeds to 700 RPM, Inch/Metric Threading, Taper Attachment, Newall 2-Axis Digital Readouts, sn:29006, mfg.8/2009
21” x 80” ACRA-TURN Model JIMK530X2000 Engine Lathe with 12” 3-Jaw Chuck, 3” Bore, Speeds to 3000 RPM, Inch / Metric, Taper, Newall 2-Axis Digital Readouts, sn:K1099197
3’ x 12” ACRA Model FRD-1300H Radial Arm Drill with Spindle Speeds to 1500 RPM, Tapping, Power Elevation & Clamping, sn:77435, mfg.10/2007
MILLING MACHINESACRA Model AM5V Knee Mill Model with 14” x 58” Table, Speeds to 3750 RPM, X & Y Powerslides, 40 Taper, Pendant & Digital Controls, sn:0706593
GRIZZLY Gear Head Milling Machine with 14” x 14” Worktable, Speeds to 3000 RPM, sn:530252
KEYSEATERMORRISON Approx. 1-1/4” Keyseater with Overarm, sn:K793418
H-FRAME PRESSCAROLINA Model CBP5500 55 Ton Adjustable H-Frame Press with 32” Capacity, sn:54795
32" X 120" ACRA SET32120 GAP BED ENGINE LATHE 21" X 80" ACRA-TURN JIMK530X2000 ENGINE LATHE
2009
3' X 12" ACRA FRD-1300H RADIAL ARM DRILL
ACRA AM5V KNEE MILL
2007
HEM H130HA-DC DOUBLE COLUMN AUTOMATIC HORIZONTAL BANDSAW
AUCTION SALE DATE & TIME – THURSDAY, SEPTEMBER 17TH @ 10:00 A.M. CDT
7
ASSORTED WELDERS
PRESS BRAKE & SHEARSTANDARD Model AB200-12 200 Ton x 12’ Hydraulic Press Brake with 12’ x 3/8 Maximum, 4” Maximum Height, 124” Between Housings, Operator Controls with Foot Actuator, sn:F6071584, mfg.2007
STANDARD Model CS375-10 10’ x 3/8 Capacity Hydraulic Plate Shear with Siemens Digital Readouts, Front Operated, Power Backgauge, Remote Foot Actuator, sn:F6071595, mfg.2007
IRONWORKERSCOTCHMAN Model D08514-20M 85 Ton Hydraulic Ironworker Dual Operator with 1” x 16” Shear, 3.2” Punch, 2” x 4” x 1/2” Notch and 6” x 6” x 1/2” Angle Shear Capacity, 14” Throat, sn:1082M0207, mfg.2007
WELDERSHYPERTHERM Power Max 105 Portable Plasma Cutter with 135 PSI, sn:105-005923
MILLER Port Syncrowave 250DX Welder with Digital Readouts, Adjustable Arms, sn:907194
(2) MILLER Port Millermatic 252 Welders with Digital Readouts, Adjustable Arms, 200 AMPS, sn:LK260126N & sn:MA220242N
LINCOLN Port Powermig 350MP Welder with Digital Readouts, Adjustable Arms, sn:U1070707348
(3) LINCOLN Port Powermig Welders
SANDBLASTEMPIRE Model PF-6060 Sand Blast Cabinet with 58” x 58” Inside Dimensions, Lights, Portable Table, Foot Actuator, sn:126704
EMPIRE Model DCM-200A Dust Collector, sn:25784
CRANES1/2 Ton Free Standing Jib Crane with 1/2 Ton COFFING Hoist & Pendant, 20’H x 20’ Arm
(2) 1 Ton Wall Mounted Jib Cranes with 1 Ton DAYTON & BUDGIT Hoists & Pendant, 20’
1 Ton Free Standing Jib Crane with 1 Ton DAYTON Hoist & Pendant, 12’H x 12’ Arm
2 Ton Portable Gantry Crane with Chainfall Hoist 15’H x 13’W Distance Between Uprights
AIR COMPRESSOR & DRYERQUINCY Model QSB-40 40 HP Rotary Screw Air Compressor with 203 PSIG, Skid Mounted, sn:128785, mfg.12/2008
QUINCY Air Dryer Type QPNC200 with R404A Refrigerant, 203 PSI, sn:CAI404534
GARDNER DENVER 10 HP Horizontal Reciprocating Air Compressor with 175PSIG
FORKLIFTSNISSAN Enduro 50 4400lb Capacity LP Forklift with Side Shift, 3-Stage Mast, 4 Hard Tires, Lights, 187” Maximum Lift Height, sn: KCPH02P904270
HEM H130HA-DC DOUBLE COLUMN AUTOMATIC HORIZONTAL BANDSAW
DIRECTIONSFROM LAFAYETTE REGIONAL AIRPORT: Exit Airport to Hwy 90 E continue for approx. 10 miles. Take the LA-88 exit. Turn left onto Coteau Rd/ LA-88 for 1.8 miles. Turn right onto LA-89 for 1.4 miles Turn left onto Austin Rd for 1.4 miles. Austin Rd turns left and becomes Dudley Rd. Plant will be on the right. Plant is approx. 18.7 miles from the airport. Follow the Auction Signs. HOTELSHAMPTON INN BROUSSARD - LAFAYETTE 2280 E Main St - Broussard, LA 70518 (337) 330-2500HOLIDAY INN EXPRESS LAFAYETTE 210 Kaliste Saloom Rd - Lafayette, LA 70508 (337) 456-6900
UPCOMING AUCTIONSTUESDAY, SEPT. 1st - Kennametal, Inc.Powdered Metal Processing Equip. Heat Treat & Machine ShopOnsite / OnlineGrant, AL
PUBLIC AUCTIONEquipment Surplus to the Continuing Needs of
MPSILATE MODEL MAZAK, CNC, FABRICATION
MACHINE SHOP & FACILITYABBEVILLE, LA
THURSDAY, SEPTEMBER 17TH @ 10:00 A.M. CDT
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes. Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
