WWW.CROFTTRUCKSA.COM CALL 210-227-5187WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM SAN ANTONO TEXAS 78207

Custom outdoor proteCtion

Best for outdoor use anywhere intense sun is an issue. Solution-dyed acrylic fibers resist fading.

our most populare all-weather fabriC

• maximum uV protection - Highest UPF rating of all K-C fabrics• 4-layer barrier - Acid rain, industrial pollutants, tree sap and bird droppings

will not harm the fabric.• dries easily - Moisture is not absorbed by the fabric fibers.• dust / pollution barrier - The two middle layers of melt-blown fabric act as

a filtration barrier against most airborne pollutants.• breathable - Allows air to circulate through the fabric.• impact absorption - 4-layer thickness absorbs impacts to help protect the

finish from nicks, dings, dents and scratches.

all weather proteCtion using film barrier teChnology

• protective outer layers - A bi-component spunbond, using sheath-core technology. The inner core is polypropylene for strength, with a polyethylene wrap for softness. A silver-gray color was selected because of its heat-resistant properties. The fabric is also treated with UV inhibitors for extended outdoor use.

• micro-porous middle layer - The barrier layer is breathable film, a proprietary stretch-film technology developed exclusively for Kimberly-Clark. The film is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust, yet large enough to allow moisture vapor to escape.

• soft, paint-protecting inner layer - A bi-component fabric made with polyethylene and nylon. This combination results in an exceptionally high strength-to-weight ratio, with the “soft touch” necessary for today’s water-based paint finishes.

best for intense sun enVironments

• fade resistant - Colors are a result of using pigment that are actually built into the fibers instead of dyeing the surface of the finished fabric.

• water resistant - The fabric is treated for moisture resistance, but it’s breathable to prevent heat build-up under the cover.

• long-lasting strength - Acrylic fibers suffer minimal loss of strength from exposure to heat, moisture and UV.

• rot, mildew resistant - Acrylic fibers resist growth that can occur in moist situations.

heaVy duty Version

WeatherShield fabrics are fade resistant, shed moisture, stop dust, dirt and bird droppings, and are very water resistant and breathable...our high performance fabrics.

The high performance non-woven fabric with the film barrier edge for maximum dirt/dust and moisture resistance...and you still get the ding protection of multi-layer construction.

Ding protection, dust protection, highest UV protection of K-C fabrics and good moisture resistance - all at a reasonable price for this outdoor fabric.

deluxe fabriC

• naturally moisture resistant - Acid rain, industrial pollutants, tree sap and bird droppings will not harm the fabric.

• breathable - Air easily circulates through the fabric to help it dry quickly and reduce heat build-up under cover.

• dust / pollution barrier - The middle barrier layer acts as a filtration barrier against most airborne pollutants.

• easy to use - Won’t shrink or stretch and retains it’s tailored shape.• 3 year limited warranty - Against defects in workmanship and/or the fabric

becoming unserviceable during normal use.

multibond fabriC

• lightweight - Easy to use and less bulky for compact storage• soft & non-abrasive - Will not scratch clean paint or clear-coat.• breathable - Allows moisture and condensation to evaporate.• moisture, mold & uV resistant - Polypropylene fibers are naturally moisture

resistant and treated for extra UV protection.• good dust protection - When used indoors, keeps vehicle cleaner than most

woven fabrics.

A lighter-weight, less expensive version of NOAH fabric, three layers instead of four and a thinner film barrier.

A great indoor cover for dust protection.

STORAgE COVERS

WWW.CROFTTRUCKSA.COM CALL 210-227-5187WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM SAN ANTONO TEXAS 78207

tire proteCtion

Heavy duty, flannel-backed vinyl protects your tires AND wheels from harmful UV rays, dirt and dust, acid rain, animals and pets.

spare tire CoVers All-Weather Protection for spare tire storage

SnapRIngTireSaversareavailablein7sizestoaccommodatealmostanyapplication.•JustspreadtheTireSaver,slideitoverthetire,andletthesteelring“SNAP”itintoplace.

STORAgE

interior proteCtion for your jeepProtectyourJEEP®interiorfromUVdamage, dirt, bird droppings and tree sap

Bag secures to stock rear window anchor bag

Best - Lightweight, with highest moisture and dust resistance

Better - UV protection plus moisture and dust resistance

Good - A mid-price leader in quality and performance

interior CoVersAvailable to fit most popular convertibles

speCialty CoVersOur most popular all-weather fabric Performance at a value price A mid-price leader in quality and performance

ready-fit semi-Custom CoVers

Custom fit Cab areaCustom Cab Coolers

hardtop CoVers

for topless jeep models • Easytouseforsummerdrivingwhenthetopisoff• Selectfromthreequalityfabrics,basedonyourprotectionneeds

Custom indoor proteCtion

maximum dust proteCtion for indoor storage

• soft but strong outer layers - The two top layers are constructed of a polypropylene / polyethylene composite spunbond. These layers take advantage of the best features of both polymers: the superior softness of polyethylene, with the strength and stability of polypropylene.

• dust barrier - A melt-blown polypropylene layer serves as a barrier to most dust, dirt and pollution. Dustop’s multi-layer construction provides substantially better dust protection when compared to traditional woven, single layer fabrics.

• softest, paint protecting inner layer - This combination results in an exceptionally high strength-to-weight ratio, with the “soft touch” necessary for today’s water-based paint finishes.

our most luxurious indoor CoVer

• Body-hugging polyester knit with Spandex (to provide stretch and recovery), finished on the inside with 100% cotton terry loop that’s been sheared to a luxurious soft fleece lining. Form-Fit covers will pamper the finish, while following every curve of the body, for a truly custom fit.

polyCotton - good basiC indoor proteCtion A traditional woven fabric for a basic cover.

tan flannel - super soft natural finish to pamper the VehiCle’s finishFor those who like traditional woven fabrics for indoor protection.

Fits like a glove and the sheared cotton fleece on the inside is the softest finish you can put on a vehicle for indoor storage - a real luxurious cover.

If you want a car to be as clean when it’s uncovered as it was when covered, this is the fabric to use. Non-woven fibers make it almost impossible for dust to penetrate and the multi-layer construction helps prevent dings and dents.