+ All Categories
Home > Documents > SylviaMintyBoost handout Final · SylviaMintyBoost handout Final Created Date: 3/8/2013 3:13:38 AM...

SylviaMintyBoost handout Final · SylviaMintyBoost handout Final Created Date: 3/8/2013 3:13:38 AM...

Date post: 20-Jul-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
1
All about: Soldering! For electronics Do! Don’t! Need help? AUGH! Don’t be afraid to ask! First try the person next to you, and if you still have questions, raise your hand and flag down a helper. Be careful! Respect your Soldering Iron! Make sure the solder sticks to the board, and the wire Hold the handle like a pencil Don’t breathe the fumes! Don’t play with your soldering iron. It can get to over 700°F! Don’t forget to wash your hands when you’re done Don’t touch the metal! Touch the tip of the iron to the joint. Wait, then touch the solder to both Bend the leads so the part doesn’t fall out Melt the solder to a perfect little tent Get other printables, stickers, videos and more @ sylviashow.com ? ? ? Things not working right? Don’t Panic! Failure is always an option, but don’t be afraid of it. No one is perfect their first time, and if you stick with it, you’ll get lots better! Common (easily fixed!) problems: Bridge Too much Insufficient Wetting
Transcript
Page 1: SylviaMintyBoost handout Final · SylviaMintyBoost handout Final Created Date: 3/8/2013 3:13:38 AM ...

All about: Soldering!For electronicsDo! Don’t!

Need help?AUGH!

Don’t be afraid to ask!

First try the person next to you, and if youstill have questions, raise your hand and flagdown a helper.

Be careful!

Respect yourSoldering Iron!

Make sure the solder sticks

to the board, and the wire

Hold the handlelike a pencil

Don’t breathe

the fumes!

Don’t play with your solderingiron. It can get to over 700°F!

Don’t forget to wash yourhands when you’re done

Don’t touchthe metal!

Touch the tip of the iron tothe joint. Wait, then touchthe solder to both

Bend the leads so thepart doesn’t fall out

Melt the solder to

a perfect little tent

Get other printables, stickers, videos and more @ sylviashow.com

???

Things not working right? Don’t Panic!

Failure is always an option, but don’t be afraid of it. No one is perfect their first time, and if you stick with it, you’ll get lots better!

Common (easily fixed!) problems:

Bridge

Too much

Insufficient Wetting

Recommended