7/28/2019 TC 252 Intervalometer

1/14

42150001 V10.0

7/28/2019 TC 252 Intervalometer

2/14

7/28/2019 TC 252 Intervalometer

3/14

Overview

Thank you for purchasing high-performance PIXEL products

First of all, thank you for purchasing product of PIXEL. TC-252 is

quality wired timer remote control with the function of single sho

continuo us shooting per second,[ ]shootin g, user-defin ed time-dela

timing plan for shooting. Low consumption ofLCD display will make yclear at a glance of the using status and using plan.

Before use this product, you must read and fully understand this ma

then learn to use the camera to ensure you are familiar with the ope

properly. Through this manual you can easily handle the operation m

andtheattentivethings.

7/28/2019 TC 252 Intervalometer

4/14

TC-252 introduction

LCD display shows the channel, power, function mode. Its eaunderstandandoperate.Low power consumption when standby; standby time more than 3 using 2pcs AAA batteries.

user-defi ned delay and timing plan sho otingThe device support to control different brand or style of cameras bydifferent shutter connect cable.

Support single shooting , continuo us shooting within one second, shooting and .

Please check all included items after open the packing, if missing, contact to dealer.

1. Timer remote control TC-252 -------1pc 2. Shutter connect cable ----

3. AAA battery --------------------- ------- 2pcs 4Manual(this manual) -----

7/28/2019 TC 252 Intervalometer

5/14

The icon of timing sh12The icon of interval time11The icon ofexposure10The icon of delay time9

8 Lowbatteryvoltage7 Delayshootingicon6 [ ]shooting icon4 Single shooting iconFunctionarea3

Display

Input plug

Shutter connect plug

DC0 DC1 DC2 E3 N3 RS1 S

Shutter connect cable

1

3

2

4 5 6 7 8

109

Display

11 12 13 1

2

1

2

The name of each part

1 Timingplanfunctionarea 2 Time displayarea

5 Continuous shooting within one second icon

7/28/2019 TC 252 Intervalometer

6/14

Connection with the camera

Preparationforinstallation anduse

1. First, fix the camera on the tripod or other fixed bracket.

2. Open protective cover of external shutter sockput the shutter plug of shutter connect cable in then make sure it has been fixed firmly.

For most of camera shutter socket, there is mis-plug inplease note insert direction so as to avoid damage to socket.

3. Insert the input plug of shutter connect cable in

control signal output socket of TC-252.The timer remote control will not able to control the cameshutter connect cable hasn' t insert correctly.

4. Open the camera power.

7/28/2019 TC 252 Intervalometer

7/14

0

[ ]shooting function

Single shooting

Sketch map for selecting function mode:

Single shooting function

Press

Press

Press

Press

Press

Press

The instruction is under the premise that the timer remote control and chave been connected tightly, and turned on the power of camera andremote control. The detail instruction of remote shooting will be show

follow.

Continuous shootingwithin one second function

Delay shooting

1. In the power-onstate, se t thesingleshooting icon [ ] as the fuonebypressingthe left move button[ ]or right move button[ ].

In the sleeping state, press any key to wake up timer remote control to enteshooting mode.In the sleeping state, it can focus and shot under the single mode without wake up .

Shooting control

7/28/2019 TC 252 Intervalometer

8/14

2

one second icon[ ]as the function one by pressing the move buttonright move button[ ].

left

2. Half-press the release button, the green light lithe camera is in the focusing state until release or fullthebutton.

4. Release the release button, the camera wilshooting.

Make sure to set the camera functi on to be [ ].

When the camera function is set to be [ ], itmay causecontinuousshooting.When the camerafunctionissetto be [ ],the camera willshootbasedon [ ] fu

Continuous shooting within one secondisonepatentfunctionwhichissuedbyPlimitedEnterprise, it' ll support spacing continuousshootingwithinonesecondneverchangethesingleshotmodeofthecamera.

3. Full-pres s the release button, red indicator will b

keep fully press the button, the indicator will flash regreen in turn. The shooting speed will be one phosecond.

Shooting control

7/28/2019 TC 252 Intervalometer

9/14

4

Thedifferencesbetween[ ]modeand [ ]modeare asfollow: [ ]functionisthe

buttonispressedfullyandkeepon , shooteverysecondandstopshootinguntilthe

button is relea sed. While [ ] function isthecamerawillstartshootingwhenthe

buttonispressedfully untilpressitagain, theshootingwillstop.

Make sure to set the camera functi on to be [ ].

When the camera function is set to be [ ], the camera only shoot once but n

shooting.When the camerafunctionissetto be [ ],the camera will be continuous shooting

When the camerafunctionissetto be [ ], the camerawill be delay shooting once

Delay shooting

Delay shootingsetting

1. In the power-on state, move the activities icon toshooting icon[ ] by pressingthe move buttonright move button[ ]. Press the set button enteri

left

The delay shooting function of TC-252 can user-defined the delay time and

Shooting control

7/28/2019 TC 252 Intervalometer

10/14

6

Operate the delay shooting

1. Press the left button[ ]or right button[ ], moactivit y icon to the delay shooting ic on[ ].

2. Half-press the release button, the green light lthecamera is in the focusing state until the release pressthebutton.3. Full-pres s the release button, timer remote start to delay countdown, redindicatorblinkquickentertothe delay shooting mode.4. When countdown is completed, timer remote c

will follow the settingshotsoutputasignal per seccontrol shooting.

When runningthedelayshooting, pressthelaunch button again, the delay shoowill stop.Make sure to set the camera function to be [ ].

When the camera function is set to be [ ], itwill startcontinuousshooting.

When the camerafunctionissetto be [ ],the camera willshootbasedon [ ] f

it may cause underexposure or overexposure.

Shooting control

7/28/2019 TC 252 Intervalometer

11/14

8

Press

Press

Press

Press

Press

Press

Pre

Pre

Gently press button[ ]once to set numerical increased, holdit on, set the valueincreas ed; Press the button [ ]once to set thenumerical reduced, hold on to values rapidly reduced.

4. Press the set button, save and exit settings.

Exposure time setting

1. Pres s left move button[ ]or right move buttonmove timer remote controls activities icon to the extiming program icon[ ].

2. Press the set button, enter the tim

second bit setting.

exposure

3. By pressing button[ ]or[ ],enter into the setting for minutes and h

Theshot

numberof

timingplan

setting

Delay time of timingplan--hours setting

Delay time of timingplan--minutes setting

Delay time of timingplan--seconds setting

Shooting control

7/28/2019 TC 252 Intervalometer

12/14

0

The shot number setting

Press

Press

Press

Press

Press

Press

Pres

Pres

Gently press button[ ]once to set numerical increased, holdit on, set the valueincreas ed; Press the button [ ]once to set thenumerical reduced, hold on to

values rapidly reduced.4. Press the set button, save and exit settings.

1. Pres s left move button[ ]or right move buttonmove timer remote controls activities icon to the itiming shots [ ].

3. By pressing button[ ]or[ ],enter into the setting for minutes and h

delay time, exposure time,shots number as the sketch map.

Interval time of timingplan--hours setting

Intervalplan--minutes setting

time of timing Intervalplan--second setting

time of timing

Exposu-re

timeof

timingplan

setting

Shooting control

7/28/2019 TC 252 Intervalometer

13/14

2

Execute timing plan

Press

Press

Press

Press

Press

Press

Press

Press

1. Press the left move button[ ]or right move button[ ], move to anamong the timing plan shooting area.

2. P ress the timing start/st op button[ ], the timer rcontrol will execute timing plan, indicator flash redand task start executing.

Press the timing plan start/stop button[ ] of timer remotebefore the timing plan executing completely, the timer controlwillstopregularlyscheduled executing.When executing the timing plan shootin g, it can take sinby pressing the release button and would not influence theplan.

Delay

shoot

-ing

function

Shooting control

7/28/2019 TC 252 Intervalometer

14/14

24

PIXEL TC-252 Specifications

Standby time: More than 3 years

Using battery: 1.5V2A AA

Dimensions(WHD):149 mm49.5mm24mm

Weight(with batteries):70.5g

Now you can starttouseuniquehigh-performancePIXEL

product TC-252. If you have any questions, youcancontactthe

localdistributor. Orvisitthe websitehttp://www.pixelhk.com.