INTRODUCTION

Our company was set up professionally in 2007, intentionally utilizing advice and procedure from

both European and North American engineering professionals.

Once our factory and quality systems were in place we began to work on market development for

Offshore, Marine and Oil & Gas projects.

Today we specialise in the manufacture of large steel structures & precision machining.

Current market experience is primarily, but not limited to Oil & Gas, Offshore,Marine Technologies,

Fishing Boats & Mining.

One of our core strengths, and an area which is providing us with a growing reputation, is the One of our core strengths, and an area which is providing us with a growing reputation, is the

bespoke design & manufacture of deck machinery equipment.

All our products are designed and manufactured specifically to our client’s requirements. And in

addition we always explore the potential to optimize the design to meet or exceed the

requirements, in a timely and cost effective manner, which creates a win-win partnership.

Our Company is strategically located only 5 km away from China’s second largest sea port at

Ningbo, which facilitates the ability to ship large fabrications quickly and easily.

We have gained many approvals which can be seen later in the presentation.

Since 2010 we have continuously concentrated on constant quality improvement and have

successfully been accredited by AWS,ASME,IIW, DNV,BV & ABS as a manufacturer of a range of

offshore equipment.

www.tqf-solutions.com

SIGNIFICANT POINTS

� ALL our welders are DNV qualified

� We are Bureau Veritas (BV) accredited for Machinery Deck Equipment (Crane

and Winches) with 80% of our welders also BV qualified.

� We are America Bureau of shipping (ABS) accredited for Machinery Deck

Equipment (Crane and Winches) with 80% of our welders also ABS qualified.

� We have more than 50 groups of WPS & PQR covering 80% of marine plates

qualified by DNV ,BV & ABS.qualified by DNV ,BV & ABS.

� The main standard we follow is AWS,ASME,EN .

� The biggest single fabrication we have manufactured was over 90 tons .

� Our annual capacity is over 5000 tons

� We operate a permanent professional project management team, who develop

and manage each new project individually, and provide customers weekly and

monthly updates

� Our two factories covers 25,000 Square Meters and is strategically laid out to

ensure good working and quality practices.

www.tqf-solutions.com

FACTORY LAYOUT

EXAMPLES OF OUR WORK

Mooring WinchUmbilical Clamp

www.tqf-solutions.com

Mooring Winch

Sub Sea Christmas Tree Frame Triple Winch System

EXAMPLES OF OUR WORK

Catwalk

Offshore Winch

www.tqf-solutions.com

Offshore Winch

Stern Roller

Windlass

MACHINING CAPACITY & SHIPPING

� Our capacity for in house machining including Boring , Rolling , Milling &

Turning, is unsurpassed and has been carefully set up to adequately service

the market for large fabrications used mostly in the On and Offshore and

Marine Equipment sectors. Specializing in products such as Winches &

Cranes, Stern Rollers, Drilling Related Equipment & Subsea Tree frame etc..

� One of our major selling points is that as our facilities can comfortably

handle modules of over 100 Tonnes, and produce and ship over 50 Meters

long, which results in our ability to despatch and deliver the products

efficiently.

� With a ‘regular’ handling capacity port within 1 Km, and a ‘extra heavy’ lift

port, which can handle extra large fabrications within 20 km, we are in the

perfect location for efficient load out of all the products we manufacture.

www.tqf-solutions.com

MACHINING CAPABILITIES

(2) Vertical Turning Lathes

Max 6 Met Diameter

80 T Load Capacity

(5) Various Horizontal Boring Machines

Max 14 x 7 x 4 Met Capacity

www.tqf-solutions.com

80 T Load Capacity

Tolerance +/- 0.02 mm

Max 14 x 7 x 4 Met Capacity

Tolerance +/- 0.2 mm

MILLING

8 Meter x 3 Meter Bed

Tolerance

+/- 0.20 mm

www.tqf-solutions.com

+/- 0.20 mm

ROLLING

www.tqf-solutions.com

2500 Tons Rolling Machine

Mandrel OD : 550 mm & 980mm

(with Changeable Base)

Mandrel Length = 4 meters long

Length > 4 meters : Welding joint needed

Plate Thickness : 200 mm Max

CUSTOMER APPROVALS

• We have been a long term supplier to Tesco Corporation for We have been a long term supplier to Tesco Corporation for We have been a long term supplier to Tesco Corporation for We have been a long term supplier to Tesco Corporation for

components used their top drive systemscomponents used their top drive systemscomponents used their top drive systemscomponents used their top drive systems

• Macgregor recently approved our facilities for the Macgregor recently approved our facilities for the Macgregor recently approved our facilities for the Macgregor recently approved our facilities for the

supply of winchessupply of winchessupply of winchessupply of winchessupply of winchessupply of winchessupply of winchessupply of winches

• Ansell Jones are regular customers of lifting Ansell Jones are regular customers of lifting Ansell Jones are regular customers of lifting Ansell Jones are regular customers of lifting

equipment fabrications equipment fabrications equipment fabrications equipment fabrications

• We recently passed a stringent audit by We recently passed a stringent audit by We recently passed a stringent audit by We recently passed a stringent audit by

OneSubsea for the manufacture of subsea OneSubsea for the manufacture of subsea OneSubsea for the manufacture of subsea OneSubsea for the manufacture of subsea

tree framestree framestree framestree frames

CUSTOMER APPROVALS

• Underwater Technology Services (S) Underwater Technology Services (S) Underwater Technology Services (S) Underwater Technology Services (S) PtePtePtePte Ltd (Ltd (Ltd (Ltd (UTSUTSUTSUTS) is an ) is an ) is an ) is an

offshore service & supply company based in Singaporeoffshore service & supply company based in Singaporeoffshore service & supply company based in Singaporeoffshore service & supply company based in Singapore

• TowimorTowimorTowimorTowimor are project company, delivering are project company, delivering are project company, delivering are project company, delivering

Maritime, Offshore and Industrial equipmentMaritime, Offshore and Industrial equipmentMaritime, Offshore and Industrial equipmentMaritime, Offshore and Industrial equipmentMaritime, Offshore and Industrial equipmentMaritime, Offshore and Industrial equipmentMaritime, Offshore and Industrial equipmentMaritime, Offshore and Industrial equipment

Other Marine Customers include, but are not Other Marine Customers include, but are not Other Marine Customers include, but are not Other Marine Customers include, but are not limiedlimiedlimiedlimied to:to:to:to:

• Cameron (USA)Cameron (USA)Cameron (USA)Cameron (USA)

• EMASEMASEMASEMAS

• ENKAENKAENKAENKA Group ( Turkey)Group ( Turkey)Group ( Turkey)Group ( Turkey)

• One Offshore EngineeringOne Offshore EngineeringOne Offshore EngineeringOne Offshore Engineering

STANDARDS OF EXCELLENCE

Quality Standards

Accreditation

The Company is accredited to

ISO 9001: 2008 through DNV

Certification for the scope of Accreditation Certification for the scope of

Oil & Gas Drilling systems

and Related Equipment

Machining

We are rapidly becoming

known for high quality

workmanship at globally

competitive rates

www.tqf-solutions.com

Quality Standards

Welders

The company works

stringently to, and has all

welders and inspectors

qualified under

STANDARDS OF EXCELLENCE

qualified under

ASME AWS D 1 .1 standards

Projects

Most of the work we do are

covered by either DNV, BV,

ABS or CCS witness, with full

and final production

inspection.

www.tqf-solutions.com

Mission Statement

Maintain and Continuously develop the Highest Qualifications,

Accreditations and Interactions between

Our Customers and TQF...

Create Profitable Mutually Strategic Growth Opportunities for TQF’s Create Profitable Mutually Strategic Growth Opportunities for TQF’s

Products (new / existing) with Customers and, Potential Customers

Globally…

Research and Analyse Markets, Competitors, Customers,

Applications & Products and Continuously Compare this to

TQF’s Current and Potential Capabilities …

Operate with Integrity, and Maintain People Orientation with the

Objective of Keeping a Happy and Career Orientated Workforce...

EuropeEurope Office Office Kilmarnock SCOTLAND Kilmarnock SCOTLAND UKUK

Manufacturing PlantManufacturing PlantNingbo CHINANingbo CHINA