Date post: | 07-Apr-2018 |
Category: |
Documents |
Upload: | prince-dudhatra |
View: | 218 times |
Download: | 0 times |
of 34
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
1/34
AN
INDUSTRIAL TRAINING REPORT
ON
PREPARED BY
Vora Kuldeep K.
ACADEMIC YEAR
2006-07
ROLL NO.
64
SEAT NO.
-:SUBMITTED TO:-
SAURASHTRA UNIVERSITY
-:GUIDED BY:-
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
2/34
Declaration
I undersigned Vora Kuldeep K. , the student of S.Y.B.B.A.,
Christ College hereby declare that the project work is my own work
and has been carried out under the guidance of Mrs. Swati Doshi
lecturer of Christ College. This has not been submitted to any other
university for securing any other examination.
Date:
Place:
Signature of student
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
3/34
Acknowledgement
To complete this report many persons have helped me. At the
time of presenting this report I thank to all who have helped me to
complete this report.
First of all I thank to Fr. Joseph, the principal of Christ College,
for providing me opportunity to prepare the report. I also thank to
Mrs. Swati Doshi project guide of S.Y.B.B.A Christ College, for
providing guidance to complete this report.
My most thanks are to director R.P. Patel and General
Manager G.P. Modi for giving me permission and providing me each
and every necessary information. I also thank to whole staff
members of Turbo Bearing Pvt. Ltd. And those who directly or
indirectly helped me to complete this project work.
Date:
Place:
Signature
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
4/34
Preface
B.B.A. is course in which practical aspect is an important as
theoretical aspect. Primary aim of B.B.A. is to develop effective
managers and that require industrial training as practical aspect.
The growth of economy is depends upon skilled managers and
B.B.A. course fulfills this need. The practical studies give an idea to
the student about problem they have to face in the future of their
managerial life
I have taken visit at Turbo Bearing Pvt. Ltd. All
information which is required for this report are collected by me and
submitted to the concern person of the company.
I have gone through and study each necessary information,
which is collected and presented in this report.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
5/34
Index
Particular
1. Awards & Achievements
2. General Information
3. Production Department
4. Personnel Department
5. Marketing Department
6. Finance Department
7. S.W.O.T. Analysis
8. Future Plans
9. Suggestions
10. Conclusion
11. Bibliography
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
6/34
Achievements
Turbo Bearing Pvt. Ltd. was start in 1989 and in 16 years
they have achieve many targets which rarely achieved by other
company.
Company was started with only one type of bearing and
today they are producing many types of bearings. Company is
also producing original equipments of other products.
3Turbo Bearing Pvt. Ltd. has been awarded for quality
standard ISO 9001:2000 by BVQI-LONDON accreditation
body and will soon get TS 16949 certificates.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
7/34
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
8/34
General Information
Content:
1. History
2. Company profile
3. Products
4. Infrastructure & Location
5. Machines capacity
6. Total Sales turnover
7. Major competitors
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
9/34
History
Turbo Bearing Pvt. Ltd. Was started in 1989, in Rajkot. Mr.
D.R. Patel and Mr. Paresh P. Patel have started TURBO. They
have started Turbo Bearing Pvt. Ltd. with investment of Rs.3 crores.
In beginning time of Turbo Bearing Pvt. Ltd. They were producing
only Tapered Roller Bearing.
Now a day because of great relation and superior quality
company produce many types of bearings and original equipment of
many vehicles. And today because of excellent performance they
have lots of satisfied customers in India as well as international
market.
There was tremendous progress of Turbo Bearing Pvt. Ltd.
during 1991 to 1994. And they expand their business in international
market.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
10/34
Company Profile
Name of company : Turbo Bearing Pvt. Ltd.
Address : Plot No. 250,
Q-Road, G.I.D.C. Aji-2,
Rajkot 360 003.
Telephone No. : 91-281-2389092, 2389087, 2389591,
2389592
Fax No. : 91-281-2387735
E-mail : [email protected]
Website : www.turbobearings.com
Establishment year : 1988
Promoter : D.R. Patel,
Paresh P. Patel,
Kirit T. Solanki,
J.P. Patel,
mailto:[email protected]://www.turbobearings.com/mailto:[email protected]://www.turbobearings.com/8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
11/34
R.P. Patel,
Scale of industry : middle scale industry
Total employees : 170
Daily hours : 1st shift 8 to 6
2nd shift 6 to 6
Area of unit : 11,000 sq. ft.
Off day : Friday
Turn over : 15 crores
Bankers : O.B.C.
H.D.F.C.
Auditor : Y.C. Anadkat & co.
Certificate : The Company has been awarded an
ISO 9001:2000 certificate by B.V.Q.I.-
LONDON.
ISO-CERTIFICATE
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
12/34
Product Of The Company
Turbo Bearing Pvt. Ltd. was start with producing taper roller
bearing, but now days Turbo Bearing Pvt. Ltd. is producing many
bearing product. Product of Turbo Bearing Pvt. Ltd. is as follow.
Tapered roller bearing
Cylindrical roller bearing
Needle roller bearing
Spherical roller bearing
Clutch bearing
Thrust bearing
Deep groove ball bearing
Four point contact bearing
Turbo Bearing Pvt. Ltd. is also producing original equipment of
three wheeler & tractor, diesel engine, machine tool, agricultural
equipment.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
13/34
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
14/34
Infrastructure & Location
Location of unit is most is most important factor for company.Because company start all activity from location and growth and
development of any company is largely depend upon location.
Location must be selected after long thinking because it is lifelong
decision. Company has to consider following factors at time of
selecting location.
Easy availability of raw material
Transport facility
Cheap power and fuel
Cheap and skilled labours
Easy and cheap finance
State help
Turbo Bearing Pvt. Ltd. has ideal location. It is located in Aji
industrial area. Which is near to the highway and company can get
raw material, transport facility, power and fuel, labours, finance
easily. It is in G.I.D.C. area so that company can also get
government help.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
15/34
General Organization Structure
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
16/34
Size And Form Of Organization
Size of Organization:
There are four size of business organization.
Small scale industry
Large scale industry
Giant scale industry
If starting investment of company is less than 1 crore then it is
consider as small scale industry. If it is 1 crore to 10 crores then it is
consider as middle scale industry. If it is 10 crores to 100 crores
then it is consider as large scale industry. If it is more than 100
crores then it is consider as giant scale industry.
Turbo Bearing Pvt. Ltd. was started with starting investment of
3 crores so that it is consider as small scale industry.
Form of Organization:
There are three type of organization.
Sole proprietorship
Partnership
company
Turbo Bearing Pvt. Ltd. is private limited company.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
17/34
Time Keeping System
Time is most important for everyone. Time never stop for any
one we should use our time properly.
Turbo Bearing Pvt. Ltd. believes that every work should be
done in time. It believes that work which is done after definite time
period. Turbo Bearing Pvt. Ltd. is very strict as far as time is
concern.
In Turbo Bearing Pvt. Ltd. there is card system. Everyone has
to write their entry time and leaved time. General shift of company is
as under.
Morning shift : 8:00 A.M. to 12:00P.M.
Recess : 12:00 P.M. to 2:00 P.M.
After noon shift: 2:00 P.M. to 6:00 P.M.
Night shift : 6:00 P.M. to 6:00 A.M.
Morning shift and after noon shift are compulsory. And night
shift is for over time. This system is quite helpful them to count
wages of employee.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
18/34
Objective
Each and every organization has one common objective andthat is profit. Turbo Bearing Pvt. Ltd. has also the object of profit but
it is in reasonable proportion. Objectives of Turbo Bearing Pvt. Ltd.
are as under.
To get reasonable profit
Create more and more customers and satisfy them
Try to improve every next production
Maintain international standard
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
19/34
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
20/34
Production Department
Content:
1. Meaning & Introduction
2. Organization chart
3. Product of the company
4. Raw material used in process
5. Production process
6. Purchasing decision
7. Quality policy
8. Quality control
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
21/34
Meaning & I ntroduction
Production is the heart of any industry. All the activities startwith production in the company. It is necessary that production
department run effectively and efficiently. Because, if company runs
production effectively and efficiently then company can run other
activity forward.
Production is an organized activity of converting raw material
in to final product.Every process of converting raw material in to
final goods is known as production process.
In Turbo Bearing Pvt. Ltd. Mr. Dineshbhai Patel is the head of
production department. He looks after every activity of production
department. He looks after every activity of production department
very effectively and efficiently.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
22/34
Organization Chart
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
23/34
Product Of The Company
Turbo Bearing Pvt. Ltd. was start with producing taper rollerbearing, but now days Turbo Bearing Pvt. Ltd. is producing many
bearing product. Product of Turbo Bearing Pvt. Ltd. is as follow.
Tapered roller bearing
Cylindrical roller bearing
Needle roller bearing
Spherical roller bearing
Clutch bearing
Thrust bearing
Deep groove ball bearing
Four point contact bearing
Turbo Bearing Pvt. Ltd. is also producing original equipment of
three wheeler & tractor, diesel engine, machine tool, agricultural
equipment.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
24/34
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
25/34
Raw Material Used In Process
For each and every product there are some materials which
are transferred in to the final product it is known as raw material for
that product. Production is start with raw material.
Turbo Bearing Pvt. Ltd. uses steel as a raw material to
produce bearing. They use only SAE 52100 steel as a raw
material.
Turbo Bearing Pvt. Ltd. purchases the raw material from
- Rajkot city
- Rajasthan
- Maharashtra
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
26/34
Production Process
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
27/34
Purchasing Decision
In the business unit purchasing decision is also a decisionwhich requires long thinking. Because company should purchase
goods at that time when they can purchase at lower rate and
working capital is not be invested for long time
In Turbo Bearing Pvt. Ltd. purchasing decision are taken by
Mr. Dineshbhai K. Patel. They purchase raw material at that time
that company can not delay in production process and working
capital is not being invested for long time. They take purchasing
decision considering following details.
- Stock of finished goods
- Order by distributors
- Stock of raw material
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
28/34
Quality Policy
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
29/34
Quality Control
Turbo Bearing Pvt. Ltd. is very conscience about quality of
product. They use latest machinery and equipment for best quality.
Metallurgical Laboratory
Turbo Bearing Pvt. Ltd. is well equipped with chemical
analysis laboratory for analyzing the chemical composition of primeraw material SAE-52100 / 100 Cr 6 steel. Main function of
laboratory is to verify the chemical composition ofSAE-52100 / 100
Cr 6 steel as per IS/ISO norms. They are using the raw material of
balls and rollers SAE-52100 / 100 Cr 6 steel from worlds best steel
making plants like DAIDO-Japan, ASCO metal-France, Willaires-
Brazil or equivalents and prime SAE-52100 / 100 Cr 6 steel for
bearing races.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
30/34
Metallurgical Microscope
Metallurgical microscope - Olympus CK 40M (Japan) make.
It is one of the latest microscopes of OLYMPUS-Japan make. It is
used for checking the microstructure of bearing components. By this
equipment, they are maintaining consistent quality of microstructure
as per standard norms in prime raw material as well as in heat
treated rings, roller & balls. It leads to improve the bearing
performance. They are using STAHL-EISEN-PRUFBLATT 1520(SEP-1520) German chart for checking microstructure as...
Spheroidize structure
Amount of perlite
Micro inclusions
Carbide network
Carbide streaks (bandings)
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
31/34
Micro Structure
As per Indian and international bearing standards the grade of
bearing steel is SAE-52100 / 100 Cr 6 which is being used by Turbo
Bearing Pvt. Ltd. Before using bearing steel as their raw material,
They make it sure that micro inclusions, micro cleanliness and
microstructure of bearing components are maintained as per
standard specifications to ensure the long life of bearings.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
32/34
Talyrond
Talyrond - Taylor Hobson Ltd. (U.K.) Make.
It is the best quality measuring instrument. It is used for checking
the roundness, squarness, concentricity and coaxiality of bearing
and components, which ensure the running accuracy and long life of
TURBO bearings.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
33/34
Form Talysurf
Form Talysurf FTS 50 - Taylor Hobson Ltd. (U.K.) Make.
Form and surface finish measuring instrument is being used for
checking the micro geometry, it evaluate parameters like Form
geometry and surface finish of components.
Also they are using this instrument for improving the quality and
verifying their product with standards. It is also useful for R & D
works as they can modify form of races & rollers to enhance
performance ofTURBO bearings.
8/6/2019 Turbo New MBA Porject Report Prince Dudhatra
34/34
Bearing Noise Level & Vibration Tester
This imported testing instrument is used for checking the noise &
vibration of Tapered, Cylindrical, Spherical roller bearings, Angular
contact ball bearings and deep groove ball bearings. This
instrument is used for upgrading the quality ofTURBO bearings.