63
CATALOGUE
CATALOGUE
Valve and fitting merchants
QUALITY VALVES & FITTINGS
QUALITY VALVES & FITTINGS
QUALITY FITTINGS
QUALITY COMPRESSION FITTINGS
Brass Valves 6Brass Fittings 10Copper Capillary Fittings 12Geka Type Fittings 12Cast Iron Valves 14Multi Range Fittings 14
Galvanised Fittings 16Flanges 19Black Fittings 22JIS Fittings 26Grooved Fittings 30
uPVC Valves 32Filter Air Valves 32uPVC Solvent Weld Fittings 34Polyprop Tank Fittings 38Polyprop Threaded Fittings 42Polyprop Insert Fittings 44uPVC Faucet Fittings 58
HDPE Compression Fittings 46Compression Ball Valves 48
Worm Drive Clamps 50Bolted Clamps 50SSN Couplings 50Camlocks 52
Thread Master Machinery 60
Waterpot 56
PIPE WORK MACHINERY
QUALITY BRASS VALVES
PERFECT SEAL as threads conform to BSPT-21 (ISO-7) standards
PEACE OF MIND ensured by visible branding on each product
PROVEN DURABILITY through robust construction
PEACE OFMIND
PERFECT SEAL
PROVENDURABILITY
QUALITY BRASS VALVES
6 Brass Valves
BALL VALVE FULL BORE BALL VALVE ECONO BALL VALVE MxFMax working pressure 25 Bar (360 psi) Max working pressure 20 Bar (290 psi) Max working pressure 25 Bar (360 psi)
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm501/0008 ¼” 8 505/0015 ½” 15 551/0015 ½” 15501/0010 ⅜” 10 505/0020 ¾” 20 551/0020 ¾” 20501/0015 ½” 15 505/0025 1” 25 551/0025 1” 25501/0020 ¾” 20 505/0032 1¼” 32 551/0040 1½” 40501/0025 1” 25 505/0040 1½” 40 551/0050 2” 50501/0032 1¼” 32 505/0050 2” 50501/0040 1½” 40501/0050 2” 50501/0065 2½” 65501/0080 3” 80501/0100 4” 100
GAUGE COCK BALL VALVE CxC GATE VALVE CxCMax working pressure 20 Bar (290 psi) Max working pressure 16 Bar (230 psi) Max working pressure 12.5 Bar (180 psi)
ITEM CODE BSP METRIC mm ITEM CODE METRIC mm ITEM CODE METRIC mm591/0010 ⅜” 10 509/0015 15 503/0015 15591/0015 ½” 15 509/0022 22 503/0022 22
GATE VALVE FULL BORE GATE VALVE ECONO STOP COCK CxCMax working pressure 12.5 Bar (180 psi) Max working pressure 10 Bar (145 psi) Max working pressure 12.5 Bar (180 psi)
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm ITEM CODE METRIC mm502/0015 ½” 15 522/0015 ½” 15 554/0015 15502/0020 ¾” 20 522/0020 ¾” 20 554/0022 22502/0025 1” 25 522/0025 1” 25502/0032 1¼” 32502/0040 1½” 40502/0050 2” 50502/0065 2½” 65502/0080 3” 80502/0100 4” 100
BALL VALVE NYLON LEVER HANDLEMax working pressure 16 Bar (230 psi)
ITEM CODE BSP METRIC mm518/0015 ½” 15518/0020 ¾” 20518/0025 1” 25518/0032 1¼” 32518/0040 1½” 40518/0050 2” 50
BALL VALVE PP LEVER HANDLEMax working pressure 16 Bar (230 psi)
ITEM CODE BSP METRIC mm521/0015 ½” 15521/0020 ¾” 20521/0025 1” 25521/0032 1¼” 32
STOP COCKMax working pressure 12.5 Bar (180 psi)
ITEM CODE BSP METRIC mm550/0015 ½” 15550/0020 ¾” 20
QUALITY BRASS VALVES
7
ANGLE VALVE (CP) PILLAR TAP EXTENDED TAPMax working pressure 10 Bar (145 psi) Max working pressure 8 Bar (116 psi) Max working pressure 8 Bar (116 psi)
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm553/0015x0015 ½” x ½” 15 x 15 558/0015 ½” 15 559/0015 ½” 15553/0015x0020 ½” x ¾” 15 x 20
MINI BALL VALVE MxF MINI BALL VALVE CxC HANDLE MINI BALL VALVE CxC SCREWDRIVER Max working pressure 8 Bar (116 psi) Max working pressure 8 Bar (116 psi) Max working pressure 8 Bar (116 psi)
ITEM CODE BSP METRIC mm ITEM CODE METRIC mm ITEM CODE METRIC mm506/0015 ½” 15 557/0015 15 556/0015 15
BIBCOCK LOCKUP BIBCOCK TANK LOCKUP TAPMax working pressure 12 Bar (174 psi) Nickel Plated Max working pressure 12 Bar (174 psi) Nickel Plated Max working pressure 12.5 Bar (180 psi)
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm529/0015 ½” 15 508/0015 ½” 15 507/0015 ½” 15529/0020 ¾” 20 508/0020 ¾” 20 507/0020 ¾” 20
PTFE TAPETeflon density 0.24cm3
ITEM CODE METRIC mm564/0012 12mm x 0.075mm x 10m564/0019 19mm x 0.075mm x 10m564/0025 25mm x 0.075mm x 10m
BIB TAPMax working pressure 12 Bar (174 psi)
ITEM CODE BSP METRIC mm516/0015 ½” 15
516/0015x0020 ½” x ¾” 15 x 20516/0020 ¾” 20
516/HPx0015 ½” 15516/HPx0020 ¾” 20
PRESSURE REDUCING VALVE WITH GUAGEMax working pressure 16 Bar (230 psi)
ITEM CODE BSP METRIC mm510/0015 ½” 15510/0020 ¾” 20510/0025 1” 25510/0032 1¼” 32510/0040 1½” 40510/0050 2” 50
BRASS BASIN WASTE (CP) SLOTTED
ITEM CODE BSP METRIC mm580/0032 1¼” 32
BRASS BATH WASTE (CP)
ITEM CODE BSP METRIC mm581/0040 1½” 40
BALL VALVE NYLON T-HANDLEMax working pressure 16 Bar (230 psi)
ITEM CODE BSP METRIC mm519/0015 ½” 15519/0020 ¾” 20519/0025 1” 25
8 Brass Valves
Y STRAINER - S/S SCREEN FOOT VALVE HEAVY DUTY SS BRAIDED CONNECTOR FxFMax working pressure 16 Bar (230 psi) Max working pressure 12.5 Bar (180 psi) Max working pressure 16 Bar (230 psi)
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm ITEM CODE METRIC mm515/0015 ½” 15 511/0032 1¼” 32 555/0015X0350 15 x 350515/0020 ¾” 20 511/0040 1½” 40 555/0015X0450 15 x 450 515/0025 1” 25 511/0050 2” 50515/0040 1½” 40 511/0065 2½” 65515/0050 2” 50 511/0080 3” 80
511/0100 4” 100
SPRING LOADED CHECK VALVE Max working pressure 16 Bar (230 psi)
ITEM CODE BSP METRIC mm514/0015 ½” 15514/0020 ¾” 20514/0025 1” 25514/0032 1¼” 32514/0040 1½” 40514/0050 2” 50514/0065 2½” 65514/0080 3” 80514/0100 4” 100
BALL FLOAT VALVE L/P SPARE ARM PVC BALL FLOATMax working pressure 6 Bar (87psi)
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm ITEM CODE METRIC mm512/0015 ½” 15 513/0015 ½” 15 513A/4500 110512/0020 ¾” 20 513/0020 ¾” 20 513A/5000 125512/0025 1” 25 513/0025 1” 25 513A/6000 150512/0040 1½” 40 513/0040 1½” 40 513A/8000 200512/0050 2” 50 513/0050 2” 50 513A/10000 250
GRAPHITE GLAND PACKING PRESSURE GAUGE 63MM DIAL PRESSURE GAUGE 100MM DIALGlycerine Filled Bottom Entry ¼” BSP Glycerine Filled Bottom Entry ⅜” BSP
ITEM CODE SIZE ITEM CODE kPA ITEM CODE kPA563/0006 6mm x 1m 590/63-0250 0 - 250 590/100-0250 0 - 250563/0008 8mm x 1m 590/63-0400 0 - 400 590/100-0400 0 - 400563/0010 10mm x 1m 590/63-0600 0 - 600 590/100-0600 0 - 600563/0012 12mm x 1m 590/63-0800 0 - 800 590/100-0800 0 - 800563/0016 16mm x 1m 590/63-1000 0 - 1000 590/100-1000 0 - 1000563/0020 20mm x 1m 590/63-1600 0 - 1600 590/100-1600 0 - 1600
590/63-2500 0 - 2500 590/100-2500 0 - 2500
STAINLESS STEEL SCREEN
ITEM CODE BSP METRIC mm514A/0015 ½” 15514A/0020 ¾” 20514A/0025 1” 25514A/0032 1¼” 32514A/0040 1½” 40514A/0050 2” 50514A/0065 2½” 65514A/0080 3” 80514A/0100 4” 100
SWING CHECK VALVEMax working pressure 12.5 Bar (180 psi)
ITEM CODE BSP METRIC mm504/0015 ½” 15504/0020 ¾” 20504/0025 1” 25504/0032 1¼” 32504/0040 1½” 40504/0050 2” 50504/0065 2½” 65504/0080 3” 80504/0100 4” 100
PEACE OFMIND
PERFECT SEAL
PROVENDURABILITY
QUALITY BRASS FITTINGS
10 Brass Fittings
TEE CxCxC TEE REDUCING CxCxC TEE FEMALE CxFI
ITEM CODE METRIC mm ITEM CODE METRIC mm ITEM CODE METRIC mm x BSP
534/0015 15 543/0015x0022 22 x 15 x 15 542/0015x0015 15 x ½”
534/0022 22 543/0022x0015 22 x 15 x 22 542/0022x0020 22 x ¾”
534/0028 28 543/0022x0022 22 x 22 x 15 542/0028x0025 28 x 1”
543/0028x0015 28 x 15
543/0028x0022 28 x 22
REDUCER CxC STOP END SPARE NUT
ITEM CODE METRIC mm ITEM CODE METRIC mm ITEM CODE METRIC mm
541/0022x0015 22 x 15 539/0015 15 540/0015 15
541/0028x0015 28 x 15 539/0022 22 540/0022 22
541/0028x0022 28 x 22 539/0028 28 540/0028 28
ELBOW CxC ELBOW CxMI ELBOW CxFI
ITEM CODE METRIC mm ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP
533/0015 15 536/0015 15 x ½” 537/0015 15 x ½”
533/0022 22 536/0015x0020 15 x ¾” 537/0015x0020 15 x ¾”
533/0022x0015 22 x 15 536/0022x0015 22 x ½” 537/0022x0015 22 x ½”
533/0028 28 536/0022 22 x ¾” 537/0022 22 x ¾”
536/0028 28 x 1” 537/0028 28 x 1”
COUPLER CxC COUPLER CxMI COUPLER CxFI
ITEM CODE METRIC mm ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP
532/0015 15 531/0015x0015 15 x ½” 535/0015 15 x ½”
532/0022 22 531/0015x0020 15 x ¾” 535/0015x0020 15 x ¾”
532/0028 28 531/0022x0015 22 x ½” 535/0022 22 x ¾”
531/0022x0020 22 x ¾” 535/0022x0015 22 x ½”
531/0028x0025 28 x 1” 535/0028 28 x 1”
QUALITY BRASS FITTINGS
11
HEX NIPPLE REDUCING BUSH
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm
562/0015 ½” 15 560/0010x0008 ⅜” x ¼” 10 x 8 560/0040x0015 1½” x ½” 40 x 15
562/0020 ¾” 20 560/0015x0008 ½” x ¼” 15 x 8 560/0040x0020 1½” x ¾” 40 x 20
562/0025 1” 25 560/0015x0010 ½” x ⅜” 15 x 10 560/0040x0025 1½” x 1” 40 x 25
562/0040 1½” 40 560/0020x0015 ¾” x ½” 20 x 15 560/0040x0032 1½” x 1¼” 40 x 32
562/0050 2” 50 560/0025x0015 1” x ½” 25 x 15 560/0050x0015 2” x ½” 50 x 15
560/0025x0020 1” x ¾” 25 x 20 560/0050x0020 2” x ¾” 50 x 20
560/0032x0015 1¼” x ½” 32 x 15 560/0050x0025 2” x 1” 50 x 25
560/0032x0020 1¼” x ¾” 32 x 20 560/0050x0032 2” x 1¼” 50 x 32
560/0032x0025 1¼” x 1” 32 x 25 560/0050x0040 2” x 1½” 50 x 40
WALL PLATE (3 HOLES) SPARE OLIVE BACK NUT
ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm ITEM CODE BSP METRIC mm
538/0015 15 x ½” 545/0015 15 561/0015 ½” 15
538/0022 22 x ¾” 545/0022 22 561/0020 ¾” 20
545/0028 28 561/0025 1” 25
DELCOP COUPLER CxFI DELCOP COUPLER CxMI DELCOP ELBOW CxFI
ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP
584/0015x0015 15 x ½” 585/0015x0015 15 x ½” 586/0015x0015 15 x ½”
584/0022x0020 22 x ¾” 585/0022x0020 22 x ¾” 586/0022x0020 22 x ¾”
DELCOP ELBOW CxMI DELCOP TEE CxFI DELCOP WALLPLATE (3 HOLES)
ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP
587/0015x0015 15 x ½” 588/0015x0015 15 x ½” 589/0015x0015 15 x ½”
587/0022x0020 22 x ¾” 588/0022x0020 22 x ¾” 589/0022x0020 22 x ¾”
12 Copper Capillary and Geka Type Fittings
COPPER CAPILLARY ELBOW COPPER CAPILLARY REDUCING ELBOW COPPER CAPILLARY 45˚ ELBOW
ITEM CODE METRIC mm ITEM CODE METRIC mm ITEM CODE METRIC mm570/0015 15 574/0022x0015 22 x 15 576/0015 15570/0022 22 576/0022 22
COPPER CAPILLARY TEE COPPER CAPILLARY TEE REDUCING COPPER CAPILLARY CROSS OVER
ITEM CODE METRIC mm ITEM CODE METRIC mm ITEM CODE METRIC mm571/0015 15 577/0015x0022 15 x 22 578/0015 15571/0022 22 577/0022x0015 22 x 15 578/0022 22
COPPER CAPILLARY COUPLING COPPER CAPILLARY SLIP COUPLING COPPER CAPILLARY REDUCING COUPLING
ITEM CODE METRIC mm ITEM CODE METRIC mm ITEM CODE METRIC mm572/0015 15 579/0015 15 573/0022x0015 22 x 15572/0022 22 579/0022 22
GEKA TYPE FITTING - FEMALE GEKA TYPE FITTING - MALE
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm523/0015 ½” 15 524/0015 ½” 15523/0020 ¾” 20 524/0020 ¾” 20523/0025 1” 25 524/0025 1” 25
COPPER CAPILLARY END CAP
ITEM CODE METRIC mm575/0015 15575/0022 22
GEKA TYPE FITTING - HOSE TAIL GEKA TYPE FITTING - BLANK GEKA TYPE FITTING - RUBBER
ITEM CODE METRIC mm ITEM CODE SIZE ITEM CODE SPARE525/0013 13 526/BLANK BLANK 527/RUBBER RUBBER525/0016 16525/0019 19525/0025 25
PEACE OFMIND
PERFECT SEAL
PROVENDURABILITY
QUALITY CI VALVES
14 Cast Iron Valves
DOUBLE DOOR CHECK VALVE - DI DISCMax working pressure 16 Bar (230 psi)
ITEM CODE SIZE mm568/0040 40568/0050 50568/0065 65568/0080 80568/0100 100568/0125 125568/0150 150568/0200 200568/0250 250568/0300 300568/0350 350
BUTTERFLY VALVE - DI DISCMax working pressure 16 Bar (230 psi)
ITEM CODE SIZE mm565/0040 40565/0050 50565/0065 65565/0080 80565/0100 100565/0125 125565/0150 150565/0200 200565/0250 250565/0300 300565/0350 350
BUTTERFLY VALVE - SS 316 DISCMax working pressure 16 Bar (230 psi)
ITEM CODE SIZE mm566/0040 40566/0050 50566/0065 65566/0080 80566/0100 100566/0125 125566/0150 150566/0200 200566/0250 250566/0300 300566/0350 350
BUTTERFLY VALVE GEARBOX
ITEM CODE SIZE mm TORQUE RATIO WEIGHT HAND WHEEL CONNECTION FLANGE567/0040 40 170 24:1 3.7 PIN 5 x 40 F05
567/0050-0080 50 - 80 170 24:1 3.7 PIN 5 x 40 F05567/0100 100 170 24:1 3.7 PIN 5 x 40 F07
567/0125-0150 125 - 150 170 24:1 3.7 PIN 5 x 40 F07567/0200 200 750 30:1 8.5 PIN 6 x 45 F10567/0250 250 750 30:1 8.5 PIN 6 x 45 F10
567/0300-0350 300-350 1200 50:1 10 PIN 8 x 45 F10
DOUBLE DOOR CHECK VALVE - SS 316 DISCMax working pressure 16 Bar (230 psi)
ITEM CODE SIZE mm569/0040 40569/0050 50569/0065 65569/0080 80569/0100 100569/0125 125569/0150 150569/0200 200569/0250 250569/0300 300569/0350 350
MULTI RANGE COUPLINGMax working pressure 16 Bar (230 psi)
ITEM CODE RANGE mm546/0040 48-58546/0050 59-72546/0065 72-85546/0080 88-103546/0100 109-128546/0125 132-153546/0150 159-182546/0175 192-210546/0200 218-235546/0250A 242-267546/0250B 272-289546/0300A 302-327546/0300B 315-332546/0350 340-360
MULTI RANGE FLANGE ADAPTORMax working pressure 16 Bar (230 psi)
ITEM CODE RANGE mm547/0040 48-58547/0050 59-72547/0065 72-85547/0080 88-103547/0100 109-128547/0125 132-153547/0150 159-182547/0200A 192-210547/0200B 218-235547/0250A 242-267547/0250B 272-289547/0300A 315-332547/0300B 322-339547/0350A 351-378547/0350B 374-391
LONGERLASTING
TAPEREDTHREADS
PIN HOLEFREE
QUALITY GALVANISED FITTINGS
16 Galvanised Fittings
REDUCING ELBOW 90°
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm902/0020x0015 ¾” x ½” 20 x 15 902/0040x0025 1½” x 1” 40 x 25 902/0065x0040 2½” x 1½” 65 x 40902/0025x0015 1" x ½" 25 x 15 902/0040x0032 1½” x 1¼” 40 x 32 902/0065x0050 2½” x 2” 65 x 50902/0025x0020 1” x ¾” 25 x 20 902/0050x0015 2” x ½” 50 x 15 902/0080x0040 3” x 1½” 80 x 40902/0032x0015 1¼” x ½” 32 x 15 902/0050x0020 2” x ¾” 50 x 20 902/0080x0050 3” x 2” 80 x 50902/0032x0020 1¼” x ¾” 32 x 20 902/0050x0025 2” x 1” 50 x 25 902/0080x0065 3” x 2½” 80 x 65902/0032x0025 1¼” x 1” 32 x 25 902/0050x0032 2” x 1¼” 50 x 32 902/0100x0050 4” x 2” 100 x 50902/0040x0015 1½” x ½” 40 x 15 902/0050x0040 2” x 1½” 50 x 40 902/0100x0065 4” x 2½” 100 x 65902/0040x0020 1½” x ¾” 40 x 20 902/0065x0032 2½” x 1¼” 65 x 32 902/0100x0080 4" x 3" 100 x 80
REDUCING SOCKET
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm910/0015x0010 ½” x ⅜” 15 x 10 910/0065x0025 2½” x 1” 65 x 25910/0020x0015 ¾” x ½” 20 x 15 910/0065x0032 2½” x 1¼” 65 x 32910/0025x0015 1” x ½” 25 x 15 910/0065x0040 2½” x 1½” 65 x 40910/0025x0020 1” x ¾” 25 x 20 910/0065x0050 2½” x 2” 65 x 50910/0032x0015 1¼” x ½” 32 x 15 910/0080x0020 3” x ¾” 80 x 20910/0032x0020 1¼” x ¾” 32 x 20 910/0080x0025 3” x 1” 80 x 25910/0032x0025 1¼” x 1” 32 x 25 910/0080x0032 3” x 1¼” 80 x 32910/0040x0015 1½” x ½” 40 x 15 910/0080x0040 3” x 1½” 80 x 40910/0040x0020 1½” x ¾” 40 x 20 910/0080x0050 3” x 2” 80 x 50910/0040x0025 1½” x 1” 40 x 25 910/0080x0065 3” x 2½” 80 x 64910/0040x0032 1½” x 1¼” 40 x 32 910/0100x0025 4” x 1” 100 x 25910/0050x0015 2” x ½” 50 x 15 910/0100x0032 4” x 1¼” 100 x 32910/0050x0020 2” x ¾” 50 x 20 910/0100x0040 4” x 1½” 100 x 40910/0050x0025 2” x 1” 50 x 25 910/0100x0050 4” x 2” 100 x 50910/0050x0032 2” x 1¼” 50 x 32 910/0100x0065 4” x 2½” 100 x 65910/0050x0040 2” x 1½” 50 x 40 910/0100x0080 4” x 3” 100 x 80
ELBOW 90°
ITEM CODE BSP METRIC mm900/0008 ¼” 8900/0010 ⅜” 10900/0015 ½” 15900/0020 ¾” 20900/0025 1” 25900/0032 1¼” 32900/0040 1½” 40900/0050 2” 50900/0065 2½” 65900/0080 3” 80900/0100 4” 100900/0150 6” 150
ELBOW 45°
ITEM CODE BSP METRIC mm903/0015 ½” 15903/0020 ¾” 20903/0025 1” 25903/0032 1¼” 32903/0040 1½” 40903/0050 2” 50903/0065 2½” 65903/0080 3” 80903/0100 4” 100903/0150 6” 150
ELBOW 90° MxF
ITEM CODE BSP METRIC mm901/0008 ¼” 8901/0010 ⅜” 10901/0015 ½” 15901/0020 ¾” 20901/0025 1” 25901/0032 1¼” 32901/0040 1½” 40901/0050 2” 50901/0065 2½” 65901/0080 3” 80901/0100 4” 100
SOCKET
ITEM CODE BSP METRIC mm909/0008 ¼” 8909/0010 ⅜” 10909/0015 ½” 15909/0020 ¾” 20909/0025 1" 25909/0032 1¼” 32909/0040 1½” 40909/0050 2” 50909/0065 2½” 65909/0080 3” 80909/0100 4” 100909/0150 6” 150
17
QUALITY GALVANISED FITTINGS
BEND 90° MxF
ITEM CODE BSP METRIC mm905/0015 ½” 15905/0020 ¾” 20905/0025 1” 25905/0032 1¼” 32905/0040 1½” 40905/0050 2” 50905/0065 2½” 65905/0080 3” 80905/0100 4” 100
BEND 90° FxF
ITEM CODE BSP METRIC mm904/0015 ½” 15904/0020 ¾” 20904/0025 1” 25904/0032 1¼” 32904/0040 1½” 40904/0050 2” 50904/0065 2½” 65904/0080 3” 80904/0100 4” 100
REDUCING TEE
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm913/0020x0015 ¾” x ½” 20 x 15 913/0050x0025 2” x 1” 50 x 25913/0025x0015 1” x ½” 25 x 15 913/0050x0032 2” x 1¼” 50 x 32913/0025x0020 1” x ¾” 25 x 20 913/0050x0040 2” x 1½” 50 x 40913/0032x0015 1¼” x ½” 32 x 15 913/0065x0025 2½” x 1” 65 x 25913/0032x0020 1¼” x ¾” 32 x 20 913/0065x0032 2½” x 1¼” 65 x 32913/0032x0025 1¼” x 1” 32 x 25 913/0065x0040 2½” x 1½” 65 x 40913/0040x0015 1½” x ½” 40 x 15 913/0080x0050 3” x 2” 80 x 50913/0040x0020 1½” x ¾” 40 x 20 913/0080x0065 3” x 2½” 80 x 65913/0040x0025 1½” x 1” 40 x 25 913/0100x0050 4” x 2” 100 x 50913/0040x0032 1½” x 1¼” 40 x 32 913/0100x0065 4” x 2½” 100 x 65913/0050x0015 2” x ½” 50 x 15 913/0100x0080 4” x 3” 100 x 80913/0050x0020 2” x ¾” 50 x 20
TEE
ITEM CODE BSP METRIC mm912/0008 ¼” 8912/0010 ⅜” 10912/0015 ½” 15912/0020 ¾” 20912/0025 1” 25912/0032 1¼” 32912/0040 1½” 40912/0050 2” 50912/0065 2½” 65912/0080 3” 80912/0100 4” 100912/0150 6” 150
SWAGE NIPPLE
ITEM CODE BSP METRIC mm917/0015 ½” 15917/0020 ¾” 20917/0025 1” 25917/0032 1¼” 32917/0040 1½” 40917/0050 2” 50917/0065 2½” 65917/0080 3” 80917/0100 4" 100917/0150 6” 150
HEXAGON NIPPLE
ITEM CODE BSP METRIC mm915/0010 ⅜” 10915/0015 ½” 15915/0020 ¾” 20915/0025 1” 25915/0032 1¼” 32915/0040 1½” 40915/0050 2” 50915/0065 2½” 65915/0080 3” 80915/0100 4” 100
BARREL NIPPLE
ITEM CODE BSP METRIC mm914/0008 ¼” 8914/0010 ⅜” 10914/0015 ½” 15914/0020 ¾” 20914/0025 1” 25914/0032 1¼” 32914/0040 1½” 40914/0050 2” 50914/0065 2½” 65914/0080 3” 80914/0100 4” 100914/0150 6” 150
SWAGE COUPLING
ITEM CODE BSP METRIC mm918/0015 ½” 15918/0020 ¾” 20918/0025 1” 25918/0032 1¼” 32918/0040 1½” 40918/0050 2” 50918/0065 2½” 65918/0080 3” 80918/0100 4" 100918/0150 6” 150918/0200 8” 200
18 Galvanised Fittings
JOHNSON COUPLING
ITEM CODE BSP METRIC mm919/0015 ½” 15919/0020 ¾” 20919/0025 1” 25919/0032 1¼” 32919/0040 1½” 40919/0050 2” 50
LONG SCREW COMPLETE
ITEM CODE BSP METRIC mm933/0015 ½” 15933/0020 ¾” 20933/0025 1” 25933/0032 1¼” 32933/0040 1½” 40933/0050 2” 50
ROUND CAP
ITEM CODE BSP METRIC mm922/0010 ⅜” 10922/0015 ½” 15922/0020 ¾” 20922/0025 1” 25922/0032 1¼” 32922/0040 1½” 40922/0050 2” 50922/0065 2½” 65922/0080 3” 80922/0100 4” 100
HOLLOW PLUG
ITEM CODE BSP METRIC mm923/0008 ¼” 8923/0010 ⅜” 10923/0015 ½” 15923/0020 ¾” 20923/0025 1” 25923/0032 1¼” 32923/0040 1½” 40923/0050 2” 50923/0065 2½” 65923/0080 3” 80923/0100 4” 100
REDUCING BUSH
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm920/0010x0008 ⅜” x ¼” 10 x 8 920/0040x0032 1½” x 1¼” 40 x 32 920/0080x0025 3” x 1” 80 x 25920/0015x0008 ½” x ¼” 15 x 8 920/0050x0015 2” x ½” 50 x 15 920/0080x0032 3” x 1¼” 80 x 32920/0015x0010 ½” x ⅜” 15 x 10 920/0050x0020 2” x ¾” 50 x 20 920/0080x0040 3” x 1½” 80 x 40920/0020x0008 ¾" x ¼" 20 x 8 920/0050x0025 2” x 1” 50 x 25 920/0080x0050 3” x 2” 80 x 50920/0020x0010 ¾” x ⅜” 20 x 10 920/0050x0032 2” x 1¼” 50 x 32 920/0080x0065 3" x 2½" 80 x 65920/0020x0015 ¾” x ½” 20 x 15 920/0050x0040 2” x 1½” 50 x 40 920/0100x0015 4” x ½” 100 x 15920/0025x0015 1” x ½” 25 x 15 920/0065x0015 2½” x ½” 65 x 15 920/0100x0020 4” x ¾” 100 x 20920/0025x0020 1” x ¾” 25 x 20 920/0065x0020 2½” x ¾” 65 x 20 920/0100x0025 4” x 1” 100 x 25920/0032x0015 1¼” x ½” 32 x 15 920/0065x0025 2½” x 1” 65 x 25 920/0100x0032 4” x 1¼” 100 x 32920/0032x0020 1¼” x ¾” 32 x 20 920/0065x0032 2½” x 1¼” 65 x 32 920/0100x0040 4” x 1½” 100 x 40920/0032x0025 1¼” x 1” 32 x 25 920/0065x0040 2½” x 1½” 65 x 40 920/0100x0050 4” x 2” 100 x 50920/0040x0015 1½” x ½” 40 x 15 920/0065x0050 2½” x 2” 65 x 50 920/0100x0065 4” x 2½” 100 x 65920/0040x0020 1½” x ¾” 40 x 20 920/0080x0015 3” x ½” 80 x 15 920/0100x0080 4” x 3” 100 x 80920/0040x0025 1½” x 1” 40 x 25 920/0080x0020 3” x ¾” 80 x 20
STEEL SOCKET
ITEM CODE BSP METRIC mm934/0015 ½” 15934/0020 ¾” 20934/0025 1” 25934/0032 1¼” 32934/0040 1½” 40934/0050 2” 50934/0065 2½” 65934/0080 3” 80934/0100 4” 100
HOLDERBAT
ITEM CODE BSP METRIC mm930/0015 ½” 15930/0020 ¾” 20930/0025 1” 25930/0032 1¼” 32930/0040 1½” 40930/0050 2” 50
BACK NUT
ITEM CODE BSP METRIC mm931/0015 ½” 15931/0020 ¾” 20931/0025 1” 25931/0032 1¼” 32931/0040 1½” 40931/0050 2” 50931/0065 2½” 65931/0080 3” 80931/0100 4” 100
CROSS
ITEM CODE BSP METRIC mm924/0015 ½” 15924/0020 ¾” 20924/0025 1” 25924/0032 1¼” 32924/0040 1½” 40924/0050 2” 50924/0065 2½” 65924/0080 3” 80924/0100 4” 100
UNION CONICAL
ITEM CODE BSP METRIC mm921/0015 ½” 15921/0020 ¾” 20921/0025 1” 25921/0032 1¼” 32921/0040 1½” 40921/0050 2” 50921/0065 2½” 65921/0080 3” 80921/0100 4” 100
19
QUALITY GALVANISED FITTINGS
TABLE 16 - THREADED FLANGE
ITEM CODE BSP METRIC mm937/0040 1½” 40937/0050 2” 50937/0065 2½” 65937/0080 3” 80937/0100 4” 100937/0150 6” 150
TABLE D - THREADED FLANGE
ITEM CODE BSP METRIC mm936/0015 ½” 15936/0020 ¾” 20936/0025 1” 25936/0032 1¼” 32936/0040 1½” 40936/0050 2” 50936/0065 2½” 65936/0080 3” 80936/0100 4” 100936/0150 6” 150
TABLE D BACKING RING
ITEM CODE METRIC mm938/0040 40938/0050 50938/0063 63938/0075 75938/0090 90938/0110 110938/0125 125938/0140 140938/0160 160938/0200 200938/0250 250
STANDPIPE
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm940/015x0150 ½” x 150 15 x 150 940/032x0150 1¼” x 150 32 x 150 940/065x0150 2½” x 150 65 x 150940/015x0200 ½” x 200 15 x 200 940/032x0200 1¼” x 200 32 x 200 940/065x0200 2½” x 200 65 x 200940/015x0300 ½” x 300 15 x 300 940/032x0300 1¼” x 300 32 x 300 940/065x0300 2½” x 300 65 x 300940/015x0400 ½” x 400 15 x 400 940/032x0400 1¼” x 400 32 x 400 940/065x0400 2½” x 400 65 x 400940/015x0450 ½” x 450 15 x 450 940/032x0450 1¼” x 450 32 x 450 940/065x0450 2½” x 450 65 x 450940/015x0500 ½” x 500 15 x 500 940/032x0500 1¼” x 500 32 x 500 940/065x0500 2½” x 500 65 x 500940/015x0600 ½” x 600 15 x 600 940/032x0600 1¼” x 600 32 x 600 940/065x0600 2½” x 600 65 x 600940/015x0750 ½” x 750 15 x 750 940/032x0750 1¼” x 750 32 x 750 940/065x0750 2½” x 750 65 x 750940/015x0900 ½” x 900 15 x 900 940/032x0900 1¼” x 900 32 x 900 940/065x0900 2½” x 900 65 x 900940/015x1000 ½” x 1000 15 x 1000 940/032x1000 1¼” x 1000 32 x 1000 940/065x1000 2½” x 1000 65 x 1000940/015x1200 ½” x 1200 15 x 1200940/020x0150 ¾” x 150 20 x 150 940/040x0150 1½” x 150 40 x 150 940/080x0150 3” x 150 80 x 150940/020x0200 ¾” x 200 20 x 200 940/040x0200 1½” x 200 40 x 200 940/080x0200 3” x 200 80 x 200940/020x0300 ¾” x 300 20 x 300 940/040x0300 1½” x 300 40 x 300 940/080x0300 3” x 300 80 x 300940/020x0400 ¾” x 400 20 x 400 940/040x0400 1½” x 400 40 x 400 940/080x0400 3” x 400 80 x 400940/020x0450 ¾” x 450 20 x 450 940/040x0450 1½” x 450 40 x 450 940/080x0450 3” x 450 80 x 450940/020x0500 ¾” x 500 20 x 500 940/040x0500 1½” x 500 40 x 500 940/080x0500 3” x 500 80 x 500940/020x0600 ¾” x 600 20 x 600 940/040x0600 1½” x 600 40 x 600 940/080x0600 3” x 600 80 x 600940/020x0750 ¾” x 750 20 x 750 940/040x0750 1½” x 750 40 x 750 940/080x0750 3” x 750 80 x 750940/020x0900 ¾” x 900 20 x 900 940/040x0900 1½” x 900 40 x 900 940/080x0900 3” x 900 80 x 900940/020x1000 ¾” x 1000 20 x 1000 940/040x1000 1½” x 1000 40 x 1000 940/080x1000 3” x 1000 80 x 1000940/020x1200 ¾” x 1200 20 x 1200940/025x0150 1” x 150 25 x 150 940/050x0150 2” x 150 50 x 150 940/100x0150 4” x 150 100 x 150940/025x0200 1” x 200 25 x 200 940/050x0200 2” x 200 50 x 200 940/100x0200 4” x 200 100 x 200940/025x0300 1” x 300 25 x 300 940/050x0300 2” x 300 50 x 300 940/100x0300 4” x 300 100 x 300940/025x0400 1” x 400 25 x 400 940/050x0400 2” x 400 50 x 400 940/100x0400 4” x 400 100 x 400940/025x0450 1” x 450 25 x 450 940/050x0450 2” x 450 50 x 450 940/100x0450 4” x 450 100 x 450940/025x0500 1” x 500 25 x 500 940/050x0500 2” x 500 50 x 500 940/100x0500 4” x 500 100 x 500940/025x0600 1” x 600 25 x 600 940/050x0600 2” x 600 50 x 600 940/100x0600 4” x 600 100 x 600940/025x0750 1” x 750 25 x 750 940/050x0750 2” x 750 50 x 750 940/100x0750 4” x 750 100 x 750940/025x0900 1” x 900 25 x 900 940/050x0900 2” x 900 50 x 900 940/100x0900 4” x 900 100 x 900940/025x1000 1” x 1000 25 x 1000 940/050x1000 2” x 1000 50 x 1000 940/100x1000 4” x 1000 100 x 1000
1600/3 SLIP FLANGE
ITEM CODE METRIC mm939/0040 40939/0050 50939/0065 65939/0080 80939/0100 100939/0150 150939/0200 200939/0250 250
1000/3 SLIP FLANGE
ITEM CODE METRIC mm926/0040 40926/0050 50926/0065 65926/0080 80926/0100 100926/0150 150926/0200 200
TABLE D SLIP FLANGE
ITEM CODE METRIC mm927/0040 40927/0050 50927/0065 65927/0080 80927/0100 100927/0150 150927/0200 200
MING® The HEAVYWEIGHT of galvanised fittings continues to forge a solid name for its uncompromising quality.
MING® hot dipped malleable iron fittings are each individually pressure tested to ensure pin hole free quality.
Each fitting is coated with a light oil to prevent corrosion on threads which conform to ISO 7-1 (BSP Standard) and ensure a prefect seal for the fittings lifetime.
Here are some interestingfacts about our MING® Products:
Max Pressure : 16 Bar (230Psi) (1.6Mpa)
Max Temperature : 200°C (392°F)
Tensile Strength : ≥ 330Mpa
Hardness : ≥ HB150 (Brinell)
Elongation Rate : ≥ 8%
LONGERLASTING
TAPEREDTHREADS
PIN HOLEFREE
QUALITY BLACK FITTINGS
22 Black Fittings
REDUCING SOCKET
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm960/0015x0010 ½” x ⅜” 15 x 10 960/0065x0025 2½” x 1” 65 x 25960/0020x0015 ¾” x ½” 20 x 15 960/0065x0032 2½” x 1¼” 65 x 32960/0025x0015 1” x ½” 25 x 15 960/0065x0040 2½” x 1½” 65 x 40960/0025x0020 1” x ¾” 25 x 20 960/0065x0050 2½” x 2” 65 x 50960/0032x0015 1¼” x ½” 32 x 15 960/0080x0020 3” x ¾” 80 x 20960/0032x0020 1¼” x ¾” 32 x 20 960/0080x0025 3” x 1” 80 x 25960/0032x0025 1¼” x 1” 32 x 25 960/0080x0032 3” x 1¼” 80 x 32960/0040x0015 1½” x ½” 40 x 15 960/0080x0040 3” x 1½” 80 x 40960/0040x0020 1½” x ¾” 40 x 20 960/0080x0050 3” x 2” 80 x 50960/0040x0025 1½” x 1” 40 x 25 960/0080x0065 3” x 2½” 80 x 64960/0040x0032 1½” x 1¼” 40 x 32 960/0100x0025 4” x 1” 100 x 25960/0050x0015 2” x ½” 50 x 15 960/0100x0032 4” x 1¼” 100 x 32960/0050x0020 2” x ¾” 50 x 20 960/0100x0040 4” x 1½” 100 x 40960/0050x0025 2” x 1” 50 x 25 960/0100x0050 4” x 2” 100 x 50960/0050x0032 2” x 1¼” 50 x 32 960/0100x0065 4” x 2½” 100 x 65960/0050x0040 2” x 1½” 50 x 40 960/0100x0080 4” x 3” 100 x 80
SOCKET
ITEM CODE BSP METRIC mm959/0008 ¼” 8959/0010 ⅜” 10959/0015 ½” 15959/0020 ¾” 20959/0025 1" 25959/0032 1¼” 32959/0040 1½” 40959/0050 2” 50959/0065 2½” 65959/0080 3” 80959/0100 4” 100959/0150 6” 150
ELBOW 90°
ITEM CODE BSP METRIC mm950/0008 ¼” 8950/0010 ⅜” 10950/0015 ½” 15950/0020 ¾” 20950/0025 1” 25950/0032 1¼” 32950/0040 1½” 40950/0050 2” 50950/0065 2½” 65950/0080 3” 80950/0100 4” 100950/0150 6” 150
ELBOW 45°
ITEM CODE BSP METRIC mm953/0015 ½” 15953/0020 ¾” 20953/0025 1” 25953/0032 1¼” 32953/0040 1½” 40953/0050 2” 50953/0065 2½” 65953/0080 3” 80953/0100 4” 100953/0150 6” 150
ELBOW 90° MxF
ITEM CODE BSP METRIC mm951/0015 ½” 15951/0020 ¾” 20951/0025 1” 25951/0032 1¼” 32951/0040 1½” 40951/0050 2” 50951/0065 2½” 65951/0080 3” 80951/0100 4” 100
REDUCING ELBOW 90°
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm952/0020x0015 ¾” x ½” 20 x 15 952/0040x0025 1½” x 1” 40 x 25 952/0065x0040 2½” x 1½” 65 x 40952/0025x0015 1" x ½" 25 x 15 952/0040x0032 1½” x 1¼” 40 x 32 952/0065x0050 2½” x 2” 65 x 50952/0025x0020 1” x ¾” 25 x 20 952/0050x0015 2” x ½” 50 x 15 952/0080x0040 3” x 1½” 80 x 40952/0032x0015 1¼” x ½” 32 x 15 952/0050x0020 2” x ¾” 50 x 20 952/0080x0050 3” x 2” 80 x 50952/0032x0020 1¼” x ¾” 32 x 20 952/0050x0025 2” x 1” 50 x 25 952/0080x0065 3” x 2½” 80 x 65952/0032x0025 1¼” x 1” 32 x 25 952/0050x0032 2” x 1¼” 50 x 32 952/0100x0050 4” x 2” 100 x 50952/0040x0015 1½” x ½” 40 x 15 952/0050x0040 2” x 1½” 50 x 40 952/0100x0065 4” x 2½” 100 x 65952/0040x0020 1½” x ¾” 40 x 20 952/0065x0032 2½” x 1¼” 65 x 32 952/0100x0080 4" x 3" 100 x 80
23
QUALITY BLACK FITTINGS
HEXAGON NIPPLE
ITEM CODE BSP METRIC mm965/0010 ⅜” 10965/0015 ½” 15965/0020 ¾” 20965/0025 1” 25965/0032 1¼” 32965/0040 1½” 40965/0050 2” 50965/0065 2½” 65965/0080 3” 80965/0100 4” 100
TEE
ITEM CODE BSP METRIC mm962/0008 ¼” 8962/0010 ⅜” 10962/0015 ½” 15962/0020 ¾” 20962/0025 1” 25962/0032 1¼” 32962/0040 1½” 40962/0050 2” 50962/0065 2½” 65962/0080 3” 80962/0100 4” 100962/0150 6” 150
BEND 90° MxF
ITEM CODE BSP METRIC mm955/0015 ½” 15955/0020 ¾” 20955/0025 1” 25955/0032 1¼” 32955/0040 1½” 40955/0050 2” 50955/0065 2½” 65955/0080 3” 80955/0100 4” 100
BEND 90° FxF
ITEM CODE BSP METRIC mm954/0015 ½” 15954/0020 ¾” 20954/0025 1” 25954/0032 1¼” 32954/0040 1½” 40954/0050 2” 50954/0065 2½” 65954/0080 3” 80954/0100 4” 100
REDUCING TEE
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm963/0020x0015 ¾” x ½” 20 x 15 963/0050x0025 2” x 1” 50 x 25963/0025x0015 1” x ½” 25 x 15 963/0050x0032 2” x 1¼” 50 x 32963/0025x0020 1” x ¾” 25 x 20 963/0050x0040 2” x 1½” 50 x 40963/0032x0015 1¼” x ½” 32 x 15 963/0065x0025 2½” x 1” 65 x 25963/0032x0020 1¼” x ¾” 32 x 20 963/0065x0032 2½” x 1¼” 65 x 32963/0032x0025 1¼” x 1” 32 x 25 963/0065x0040 2½” x 1½” 65 x 40963/0040x0015 1½” x ½” 40 x 15 963/0080x0050 3” x 2” 80 x 50963/0040x0020 1½” x ¾” 40 x 20 963/0080x0065 3” x 2½” 80 x 65963/0040x0025 1½” x 1” 40 x 25 963/0100x0050 4” x 2” 100 x 50963/0040x0032 1½” x 1¼” 40 x 32 963/0100x0065 4” x 2½” 100 x 65963/0050x0015 2” x ½” 50 x 15 963/0100x0080 4” x 3” 100 x 80963/0050x0020 2” x ¾” 50 x 20
SWAGE NIPPLE
ITEM CODE BSP METRIC mm967/0015 ½” 15967/0020 ¾” 20967/0025 1” 25967/0032 1¼” 32967/0040 1½” 40967/0050 2” 50967/0065 2½” 65967/0080 3” 80967/0100 4" 100967/0150 6” 150
BARREL NIPPLE
ITEM CODE BSP METRIC mm916/0008 ¼” 8916/0010 ⅜” 10916/0015 ½” 15916/0020 ¾” 20916/0025 1” 25916/0032 1¼” 32916/0040 1½” 40916/0050 2” 50916/0065 2½” 65916/0080 3” 80916/0100 4” 100916/0150 6” 150
ABNORMAL TEE
ITEM CODE BSP METRIC mm966/0032x0025x0015 1¼” x 1” x ½” 32 x 25 x 15966/0032x0025x0025 1¼” x 1” x 1” 32 x 25 x 25966/0040x0032x0015 1½” x 1¼” x ½” 40 x 32 x 15966/0040x0032x0020 1½” x 1¼” x ¾” 40 x 32 x 20966/0040x0032x0025 1½” x 1¼” x 1” 40 x 32 x 25966/0040x0032x0032 1½” x 1¼” x 1¼” 40 x 32 x 32966/0050x0032x0025 2” x 1¼” x 1” 50 x 32 x 25966/0050x0040x0025 2” x 1½” x 1” 50 x 40 x 25
24 Black Fittings
STEEL SOCKET
ITEM CODE BSP METRIC mm935/0015 ½” 15935/0020 ¾” 20935/0025 1” 25935/0032 1¼” 32935/0040 1½” 40935/0050 2” 50935/0065 2½” 65935/0080 3” 80935/0100 4” 100
JOHNSON COUPLING
ITEM CODE BSP METRIC mm969/0015 ½” 15969/0020 ¾” 20969/0025 1” 25969/0032 1¼” 32969/0040 1½” 40969/0050 2” 50
LONG SCREW COMPLETE
ITEM CODE BSP METRIC mm983/0015 ½” 15983/0020 ¾” 20983/0025 1” 25983/0032 1¼” 32983/0040 1½” 40983/0050 2” 50
ROUND CAP
ITEM CODE BSP METRIC mm972/0010 ⅜” 10972/0015 ½” 15972/0020 ¾” 20972/0025 1” 25972/0032 1¼” 32972/0040 1½” 40972/0050 2” 50972/0065 2½” 65972/0080 3” 80972/0100 4” 100
HOLLOW PLUG
ITEM CODE BSP METRIC mm973/0010 ⅜” 10973/0015 ½” 15973/0020 ¾” 20973/0025 1” 25973/0032 1¼” 32973/0040 1½” 40973/0050 2” 50973/0065 2½” 65973/0080 3” 80973/0100 4” 100
REDUCING BUSH
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm970/0010x0008 ⅜” x ¼” 10 x 8 970/0040x0032 1½” x 1¼” 40 x 32 970/0080x0025 3” x 1” 80 x 25970/0015x0008 ½” x ¼” 15 x 8 970/0050x0015 2” x ½” 50 x 15 970/0080x0032 3” x 1¼” 80 x 32970/0015x0010 ½” x ⅜” 15 x 10 970/0050x0020 2” x ¾” 50 x 20 970/0080x0040 3” x 1½” 80 x 40970/0020x0008 ¾" x ¼" 20 x 8 970/0050x0025 2” x 1” 50 x 25 970/0080x0050 3” x 2” 80 x 50970/0020x0010 ¾” x ⅜” 20 x 10 970/0050x0032 2” x 1¼” 50 x 32 970/0080x0065 3" x 2½" 80 x 65970/0020x0015 ¾” x ½” 20 x 15 970/0050x0040 2” x 1½” 50 x 40 970/0100x0015 4” x ½” 100 x 15970/0025x0015 1” x ½” 25 x 15 970/0065x0015 2½” x ½” 65 x 15 970/0100x0020 4” x ¾” 100 x 20970/0025x0020 1” x ¾” 25 x 20 970/0065x0020 2½” x ¾” 65 x 20 970/0100x0025 4” x 1” 100 x 25970/0032x0015 1¼” x ½” 32 x 15 970/0065x0025 2½” x 1” 65 x 25 970/0100x0032 4” x 1¼” 100 x 32970/0032x0020 1¼” x ¾” 32 x 20 970/0065x0032 2½” x 1¼” 65 x 32 970/0100x0040 4” x 1½” 100 x 40970/0032x0025 1¼” x 1” 32 x 25 970/0065x0040 2½” x 1½” 65 x 40 970/0100x0050 4” x 2” 100 x 50970/0040x0015 1½” x ½” 40 x 15 970/0065x0050 2½” x 2” 65 x 50 970/0100x0065 4” x 2½” 100 x 65970/0040x0020 1½” x ¾” 40 x 20 970/0080x0015 3” x ½” 80 x 15 970/0100x0080 4” x 3” 100 x 80970/0040x0025 1½” x 1” 40 x 25 970/0080x0020 3” x ¾” 80 x 20
HOLDERBAT
ITEM CODE BSP METRIC mm980/0015 ½” 15980/0020 ¾” 20980/0025 1” 25980/0032 1¼” 32980/0040 1½” 40980/0050 2” 50
BACK NUT
ITEM CODE BSP METRIC mm981/0015 ½” 15981/0020 ¾” 20981/0025 1” 25981/0032 1¼” 32981/0040 1½” 40981/0050 2” 50981/0065 2½” 65981/0080 3” 80981/0100 4” 100
CROSS
ITEM CODE BSP METRIC mm974/0015 ½” 15974/0020 ¾” 20974/0025 1” 25974/0032 1¼” 32974/0040 1½” 40974/0050 2” 50974/0065 2½” 65974/0080 3” 80974/0100 4” 100
UNION CONICAL
ITEM CODE BSP METRIC mm971/0015 ½” 15971/0020 ¾” 20971/0025 1” 25971/0032 1¼” 32971/0040 1½” 40971/0050 2” 50971/0065 2½” 65971/0080 3” 80971/0100 4” 100
PROVENDURABILITY
HOTFORMED
PEACE OFMIND
QUALITY JIS FITTINGS
26 JIS Butt Weld Fittings
ELBOW SHORT RADIUS 90°
CODE SIZE mm OD mm ID mm943/0015 15 21.7 16.1943/0020 20 27.2 21.6943/0025 25 34.0 27.6943/0032 32 42.7 35.7943/0040 40 48.6 41.6943/0050 50 60.5 52.9943/0065 65 76.3 67.9943/0080 80 89.1 80.7943/0090 90 101.6 93.2943/0100 100 114.3 105.3943/0125 125 139.8 130.8943/0150 150 165.2 155.2943/0200 *200 219.1 207.5943/0250 *250 273.0 259.8943/0300 *300 323.8 310.0943/0350 350 355.6 339.8943/0400 400 406.4 390.6943/0450 450 457.2 441.4943/0500 500 508.0 492.2943/0550 550 558.8 543.0943/0600 600 609.6 593.8
ELBOW 45°
CODE SIZE mm OD mm ID mm944/0015 15 21.7 16.1944/0020 20 27.2 21.6944/0025 25 34.0 27.6944/0032 32 42.7 35.7944/0040 40 48.6 41.6944/0050 50 60.5 52.9944/0065 65 76.3 67.9944/0080 80 89.1 80.7944/0090 90 101.6 93.2944/0100 100 114.3 105.3944/0125 125 139.8 130.8944/0150 150 165.2 155.2944/0200 *200 219.1 207.5944/0250 *250 273.0 259.8944/0300 *300 323.8 310.0944/0350 350 355.6 339.8944/0400 400 406.4 390.6944/0450 450 457.2 441.4944/0500 500 508.0 492.2944/0550 550 558.8 543.0944/0600 600 609.6 593.8
ELBOW LONG RADIUS 90°
CODE SIZE mm OD mm ID mm942/0015 15 21.7 16.1942/0020 20 27.2 21.6942/0025 25 34.0 27.6942/0032 32 42.7 35.7942/0040 40 48.6 41.6942/0050 50 60.5 52.9942/0065 65 76.3 67.9942/0080 80 89.1 80.7942/0090 90 101.6 93.2942/0100 100 114.3 105.3942/0125 125 139.8 130.8942/0150 150 165.2 155.2942/0200 *200 219.1 207.5942/0250 *250 273.0 259.8942/0300 *300 323.8 310.0942/0350 350 355.6 339.8942/0400 400 406.4 390.6942/0450 450 457.2 441.4942/0500 500 508.0 492.2942/0550 550 558.8 543.0942/0600 600 609.6 593.8
TEE
CODE SIZE mm OD mm ID mm947/0015 15 21.7 16.1947/0020 20 27.2 21.6947/0025 25 34.0 27.6947/0032 32 42.7 35.7947/0040 40 48.6 41.6947/0050 50 60.5 52.9947/0065 65 76.3 67.9947/0080 80 89.1 80.7947/0090 90 101.6 93.2947/0100 100 114.3 105.3947/0125 125 139.8 130.8947/0150 150 165.2 155.2947/0200 *200 219.1 207.5947/0250 *250 273.0 259.8947/0300 *300 323.8 310.0947/0350 350 355.6 339.8947/0400 400 406.4 390.6947/0450 450 457.2 441.4947/0500 500 508.0 492.2947/0550 550 558.8 543.0947/0600 600 609.6 593.8
CAP
CODE SIZE mm OD mm ID mm949/0015 15 21.7 16.1949/0020 20 27.2 21.6949/0025 25 34.0 27.6949/0032 32 42.7 35.7949/0040 40 48.6 41.6949/0050 50 60.5 52.9949/0065 65 76.3 67.9949/0080 80 89.1 80.7949/0090 90 101.6 93.2949/0100 100 114.3 105.3949/0125 125 139.8 130.8949/0150 150 165.2 155.2949/0200 *200 219.1 207.5949/0250 *250 273.0 259.8949/0300 *300 323.8 310.0949/0350 350 355.6 339.8949/0400 400 406.4 390.6949/0450 450 457.2 441.4949/0500 500 508.0 492.2949/0550 550 558.8 543.0949/0600 600 609.6 593.8
27
QUALITY FITTINGS
REDUCER CONCENTRIC
CODE SIZE mm OD CODE SIZE mm OD CODE SIZE mm OD945/0020x0015 20 x 15 27.2 x 21.7 945/0100x0050 100 x 50 114.3 x 60.5 945/0350x0200 350 x 200 355.6 x 219.1945/0025x0015 25 x 15 24.0 x 21.7 945/0100x0065 100 x 65 114.3 x 76.3 945/0350x0250 *350 x 250 355.6 x 273.0945/0025x0020 25 x 20 34.0 x 27.2 945/0100x0080 100 x 80 114.3 x 89.1 945/0350x0300 *350 x 300 355.6 x 323.8945/0032x0015 32 x 15 42.7 x 21.7 945/0100x0090 100 x 90 114.3 x 101.6 945/0400x0150 400 x 150 406.4 x 165.2945/0032x0020 32 x 20 42.7 x 27.2 945/0125x0050 125 x 50 139.8 x 60.5 945/0400x0200 *400 x 200 406.4 x 219.1945/0032x0025 32 x 25 42.7 x 34.0 945/0125x0065 125 x 65 139.8 x 76.3 945/0400x0250 *400 x 250 406.4 x 273.0945/0040x0015 40 x 15 48.6 x 21.7 945/0125x0080 125 x 80 139.8 x 89.1 945/0400x0300 400 x 300 406.4 x 318.5945/0040x0020 40 x 20 48.6 x 27.2 945/0125x0090 125 x 90 139.8 x 101.6 945/0400x0350 400 x 350 406.4 x 355.6945/0040x0025 40 x 25 48.6 x 34.0 945/0125x0100 125 x 100 139.8 x 114.3 945/0450x0250 *450 x 250 457.2 x 273.0945/0040x0032 40 x 32 48.6 x 42.7 945/0150x0065 150 x 65 165.2 x 76.3 945/0450x0300 *450 x 300 457.2 x 323.8945/0050x0020 50 x 20 60.5 x 27.2 945/0150x0080 150 x 80 165.2 x 89.1 945/0450x0350 450 x 350 457.2 x 355.6945/0050x0025 50 x 25 60.5 x 34.0 945/0150x0090 150 x 90 165.2 x 101.6 945/0450x0400 450 x 400 457.2 x 406.4945/0050x0032 50 x 32 60.5 x 42.7 945/0150x0100 150 x 100 165.2 x 114.3 945/0500x0200 *500 x 200 508.0 x 219.1945/0050x0040 50 x 40 60.5 x 48.6 945/0150x0125 150 x 125 165.2 x 139.8 945/0500x0250 *500 x 250 508.0 x 273.0945/0065x0025 65 x 25 76.3 x 34.0 945/0200x0080 *200 x 80 219.1 x 89.1 945/0500x0300 *500 x 300 508.0 x 323.8945/0065x0032 65 x 32 76.3 x 42.7 945/0200x0090 *200 x 90 219.1 x 101.6 945/0500x0350 500 x 350 508.0 x 355.6945/0065x0040 65 x 40 76.3 x 48.6 945/0200x0100 *200 x 100 219.1 x 114.3 945/0500x0400 500 x 400 508.0 x 406.4945/0065x0050 65 x 50 76.3 x 60.5 945/0200x0125 *200 x 125 219.1 x 139.8 945/0500x0450 500 x 450 508.0 x 457.2945/0080x0032 80 x 32 89.1 x 42.7 945/0200x0150 *200 x 150 219.1 x 165.2 945/0550x0350 550 x 350 508.8 x 355.6945/0080x0040 80 x 40 89.1 x 48.6 945/0250x0100 *250 x 100 273.0 x 114.3 945/0550x0400 550 x 400 558.8 x 406.4945/0080x0050 80 x 50 89.1 x 60.5 945/0250x0125 *250 x 125 273.0 x 139.8 945/0550x0450 550 x 450 558.8 x 457.2945/0080x0065 80 x 65 89.1 x 76.3 945/0250x0150 *250 x 150 273.0 x 165.2 945/0550x0500 550 x 500 558.8 x 508.0945/0090x0032 90 x 32 101.8 x 42.7 945/0250x0200 *250 x 200 273.0 x 219.1 945/0600x0400 600 x 400 609.6 x 406.4945/0090x0040 90 x 40 101.6 x 48.6 945/0300x0125 *300 x 125 323.8 x 139.8 945/0600x0450 600 x 450 609.6 x 457.2945/0090x0050 90 x 50 101.6 x 60.5 945/0300x0150 *300 x 150 323.8 x 165.2 945/0600x0500 600 x 500 609.6 x 508.0945/0090x0065 90 x 65 101.6 x 76.3 945/0300x0200 *300 x 200 323.8 x 219.1 945/0600x0550 600 x 550 609.6 x 558.8945/0090x0080 90 x 80 101.6 x 89.1 945/0300x0250 *300 x 250 323.8 x 373.0945/0100x0040 100 x 40 114.3 x 48.6 945/0350x0150 350 x 150 355.6 x 165.2
REDUCER ECCENTRIC
CODE SIZE mm OD CODE SIZE mm OD CODE SIZE mm OD946/0020x0015 20 x 15 27.2 x 21.7 946/0100x0050 100 x 50 114.3 x 60.5 946/0350x0200 350 x 200 355.6 x 219.1946/0025x0015 25 x 15 24.0 x 21.7 946/0100x0065 100 x 65 114.3 x 76.3 946/0350x0250 *350 x 250 355.6 x 273.0946/0025x0020 25 x 20 34.0 x 27.2 946/0100x0080 100 x 80 114.3 x 89.1 946/0350x0300 *350 x 300 355.6 x 323.8946/0032x0015 32 x 15 42.7 x 21.7 946/0100x0090 100 x 90 114.3 x 101.6 946/0400x0150 400 x 150 406.4 x 165.2946/0032x0020 32 x 20 42.7 x 27.2 946/0125x0050 125 x 50 139.8 x 60.5 946/0400x0200 *400 x 200 406.4 x 219.1946/0032x0025 32 x 25 42.7 x 34.0 946/0125x0065 125 x 65 139.8 x 76.3 946/0400x0250 *400 x 250 406.4 x 273.0946/0040x0015 40 x 15 48.6 x 21.7 946/0125x0080 125 x 80 139.8 x 89.1 946/0400x0300 400 x 300 406.4 x 318.5946/0040x0020 40 x 20 48.6 x 27.2 946/0125x0090 125 x 90 139.8 x 101.6 946/0400x0350 400 x 350 406.4 x 355.6946/0040x0025 40 x 25 48.6 x 34.0 946/0125x0100 125 x 100 139.8 x 114.3 946/0450x0250 *450 x 250 457.2 x 273.0946/0040x0032 40 x 32 48.6 x 42.7 946/0150x0065 150 x 65 165.2 x 76.3 946/0450x0300 *450 x 300 457.2 x 323.8946/0050x0020 50 x 20 60.5 x 27.2 946/0150x0080 150 x 80 165.2 x 89.1 946/0450x0350 450 x 350 457.2 x 355.6946/0050x0025 50 x 25 60.5 x 34.0 946/0150x0090 150 x 90 165.2 x 101.6 946/0450x0400 450 x 400 457.2 x 406.4946/0050x0032 50 x 32 60.5 x 42.7 946/0150x0100 150 x 100 165.2 x 114.3 946/0500x0200 *500 x 200 508.0 x 219.1946/0050x0040 50 x 40 60.5 x 48.6 946/0150x0125 150 x 125 165.2 x 139.8 946/0500x0250 *500 x 250 508.0 x 273.0946/0065x0025 65 x 25 76.3 x 34.0 946/0200x0080 *200 x 80 219.1 x 89.1 946/0500x0300 *500 x 300 508.0 x 323.8946/0065x0032 65 x 32 76.3 x 42.7 946/0200x0090 *200 x 90 219.1 x 101.6 946/0500x0350 500 x 350 508.0 x 355.6946/0065x0040 65 x 40 76.3 x 48.6 946/0200x0100 *200 x 100 219.1 x 114.3 946/0500x0400 500 x 400 508.0 x 406.4946/0065x0050 65 x 50 76.3 x 60.5 946/0200x0125 *200 x 125 219.1 x 139.8 946/0500x0450 500 x 450 508.0 x 457.2946/0080x0032 80 x 32 89.1 x 42.7 946/0200x0150 *200 x 150 219.1 x 165.2 946/0550x0350 550 x 350 508.8 x 355.6946/0080x0040 80 x 40 89.1 x 48.6 946/0250x0100 *250 x 100 273.0 x 114.3 946/0550x0400 550 x 400 558.8 x 406.4946/0080x0050 80 x 50 89.1 x 60.5 946/0250x0125 *250 x 125 273.0 x 139.8 946/0550x0450 550 x 450 558.8 x 457.2946/0080x0065 80 x 65 89.1 x 76.3 946/0250x0150 *250 x 150 273.0 x 165.2 946/0550x0500 550 x 500 558.8 x 508.0946/0090x0032 90 x 32 101.8 x 42.7 946/0250x0200 *250 x 200 273.0 x 219.1 946/0600x0400 600 x 400 609.6 x 406.4946/0090x0040 90 x 40 101.6 x 48.6 946/0300x0125 *300 x 125 323.8 x 139.8 946/0600x0450 600 x 450 609.6 x 457.2946/0090x0050 90 x 50 101.6 x 60.5 946/0300x0150 *300 x 150 323.8 x 165.2 946/0600x0500 600 x 500 609.6 x 508.0946/0090x0065 90 x 65 101.6 x 76.3 946/0300x0200 *300 x 200 323.8 x 219.1 946/0600x0550 600 x 550 609.6 x 558.8946/0090x0080 90 x 80 101.6 x 89.1 946/0300x0250 *300 x 250 323.8 x 373.0946/0100x0040 100 x 40 114.3 x 48.6 946/0350x0150 350 x 150 355.6 x 165.2
* Dimensions to BS 1965
28 JIS Butt Weld Fittings
TEE REDUCING
CODE SIZE mm OD CODE SIZE mm OD CODE SIZE mm OD948/0020x0015 20 x 15 27.2 x 21.7 948/0100x0050 100 x 50 114.3 x 60.5 948/0350x0200 350 x 200 355.6 x 219.1948/0025x0015 25 x 15 24.0 x 21.7 948/0100x0065 100 x 65 114.3 x 76.3 948/0350x0250 *350 x 250 355.6 x 273.0948/0025x0020 25 x 20 34.0 x 27.2 948/0100x0080 100 x 80 114.3 x 89.1 948/0350x0300 *350 x 300 355.6 x 323.8948/0032x0015 32 x 15 42.7 x 21.7 948/0100x0090 100 x 90 114.3 x 101.6 948/0400x0150 400 x 150 406.4 x 165.2948/0032x0020 32 x 20 42.7 x 27.2 948/0125x0050 125 x 50 139.8 x 60.5 948/0400x0200 *400 x 200 406.4 x 219.1948/0032x0025 32 x 25 42.7 x 34.0 948/0125x0065 125 x 65 139.8 x 76.3 948/0400x0250 *400 x 250 406.4 x 273.0948/0040x0015 40 x 15 48.6 x 21.7 948/0125x0080 125 x 80 139.8 x 89.1 948/0400x0300 400 x 300 406.4 x 318.5948/0040x0020 40 x 20 48.6 x 27.2 948/0125x0090 125 x 90 139.8 x 101.6 948/0400x0350 400 x 350 406.4 x 355.6948/0040x0025 40 x 25 48.6 x 34.0 948/0125x0100 125 x 100 139.8 x 114.3 948/0450x0250 *450 x 250 457.2 x 273.0948/0040x0032 40 x 32 48.6 x 42.7 948/0150x0065 150 x 65 165.2 x 76.3 948/0450x0300 *450 x 300 457.2 x 323.8948/0050x0020 50 x 20 60.5 x 27.2 948/0150x0080 150 x 80 165.2 x 89.1 948/0450x0350 450 x 350 457.2 x 355.6948/0050x0025 50 x 25 60.5 x 34.0 948/0150x0090 150 x 90 165.2 x 101.6 948/0450x0400 450 x 400 457.2 x 406.4948/0050x0032 50 x 32 60.5 x 42.7 948/0150x0100 150 x 100 165.2 x 114.3 948/0500x0200 *500 x 200 508.0 x 219.1948/0050x0040 50 x 40 60.5 x 48.6 948/0150x0125 150 x 125 165.2 x 139.8 948/0500x0250 *500 x 250 508.0 x 273.0948/0065x0025 65 x 25 76.3 x 34.0 948/0200x0080 *200 x 80 219.1 x 89.1 948/0500x0300 *500 x 300 508.0 x 323.8948/0065x0032 65 x 32 76.3 x 42.7 948/0200x0090 *200 x 90 219.1 x 101.6 948/0500x0350 500 x 350 508.0 x 355.6948/0065x0040 65 x 40 76.3 x 48.6 948/0200x0100 *200 x 100 219.1 x 114.3 948/0500x0400 500 x 400 508.0 x 406.4948/0065x0050 65 x 50 76.3 x 60.5 948/0200x0125 *200 x 125 219.1 x 139.8 948/0500x0450 500 x 450 508.0 x 457.2948/0080x0032 80 x 32 89.1 x 42.7 948/0200x0150 *200 x 150 219.1 x 165.2 948/0550x0350 550 x 350 508.8 x 355.6948/0080x0040 80 x 40 89.1 x 48.6 948/0250x0100 *250 x 100 273.0 x 114.3 948/0550x0400 550 x 400 558.8 x 406.4948/0080x0050 80 x 50 89.1 x 60.5 948/0250x0125 *250 x 125 273.0 x 139.8 948/0550x0450 550 x 450 558.8 x 457.2948/0080x0065 80 x 65 89.1 x 76.3 948/0250x0150 *250 x 150 273.0 x 165.2 948/0550x0500 550 x 500 558.8 x 508.0948/0090x0032 90 x 32 101.8 x 42.7 948/0250x0200 *250 x 200 273.0 x 219.1 948/0600x0400 600 x 400 609.6 x 406.4948/0090x0040 90 x 40 101.6 x 48.6 948/0300x0125 *300 x 125 323.8 x 139.8 948/0600x0450 600 x 450 609.6 x 457.2948/0090x0050 90 x 50 101.6 x 60.5 948/0300x0150 *300 x 150 323.8 x 165.2 948/0600x0500 600 x 500 609.6 x 508.0948/0090x0065 90 x 65 101.6 x 76.3 948/0300x0200 *300 x 200 323.8 x 219.1 948/0600x0550 600 x 550 609.6 x 558.8948/0090x0080 90 x 80 101.6 x 89.1 948/0300x0250 *300 x 250 323.8 x 373.0948/0100x0040 100 x 40 114.3 x 48.6 948/0350x0150 350 x 150 355.6 x 165.2
DIMENSIONAL TOLERANCES AND PERMISSIBLE VALUES
ITEMTYPES
OF PIPE FITTINGS
NOMINAL DIAMETER mm15-65 80-100 125-200 250-450 500-600 650-750
TOLERANCE mm
Outside diameter at end
All fittings
± 2.0 ± 2.5 ± 3.5+5.0- 4.5
+6.4- 4.8
Inside diameter at end face ± 2.0 ± 2.5 ± 3.5 ± 4.5 ± 4.8Thickness *not specified -15%Bevel angle See FigHeight of root face See Fig
Dimensions from centerline to end face45 ° Elbow90 ° Elbow
± 2.0 ± 3.2
Overall length Reducers ± 2.0 ± 3.2 ± 4.8Dimension from centerline to end face Tees ± 2.0 ± 3.2 ± 4.8Dimensions from back to end face Caps ± 3.2 ± 6.4 -
Act
ual t
hick
ness
of p
ipe
fittin
g
Insi
de d
iam
eter
Out
side
dia
met
er
(Height of root face)
30ºmax
20 ± 1.2
32.5º ± 2.5º
ROBUSTCONSTRUCTION
FMAPPROVED
PIN HOLEFREE
QUALITY GROOVED FITTINGS
30 Grooved Fittings
GROOVED COUPLING
CODE SIZE mm PIPE OD mm LENGTH mm WIDTH mm DIAMETER mm BOLT mm
990/0025 25 33.7 97 45 55 M10x40990/0032 32 42.4 107.5 45 63.5 M10x45990/0040 40 48.3 114 45 69 M10x45990/0050 50 60.3 124 46 83.6 M10x55990/0065 65 76.1 139 46 98 M10x55990/0080 80 88.9 156 46 114 M10x55990/0100 100 114.3 189 50 142 M12x65990/0125 125 139.7 222 50 170 M12x65990/0150 150 165.1 244 50 196 M12x65990/0200 200 219.1 316 60 256 M16x80990/0250 250 267.4 400 64 313 M20x90990/0300 300 318.5 464 64 368 M22x110
GROOVED ELBOW 90˚
CODE SIZE mm PIPE OD mm LENGTH mm
991/0025 25 33.7 57991/0032 32 42.4 70991/0040 40 48.3 70991/0050 50 60.3 83991/0065 65 76.1 95991/0080 80 88.9 108991/0100 100 114.3 127991/0125 125 139.7 140991/0150 150 165.1 165991/0200 200 219.1 197
GROOVED TEE
CODE SIZE mm PIPE OD mm LENGTH mm
992/0025 25 33.7 57992/0032 32 42.4 70992/0040 40 48.3 70992/0050 50 60.3 84992/0065 65 76.1 95992/0080 80 88.9 108992/0100 100 114.3 127992/0125 125 139.7 140992/0150 150 165.1 165992/0200 200 219.1 197
SPECIFICATIONS
MaterialElongation Break (%) Tensile Strength (Mpa) Yield Strength (Mpa)
18.1 512 442
Component Elements (%)C Ce Cr Cu Fe Mg Mn Mo Ni P Si S
3.800 0.006 0.040 0.150 94.050 0.030 0.160 0.030 0.050 0.020 2.750 0.002
Bolt Property
SWRCH35K
Elongation after Break (%) Tensile Strength (N/mm2) Yield Strength (N/mm2)
20 850 694
Factory complies with:ISO 9001:2008ISO 14001:2004
SUNRESISTANT
PROVENDURABILITY
EXTRA STRENGTH
TOMMYVALVE.COM
QUALITY PVC VALVES
32 uPVC Valves
BALL VALVE COMPACT THREADED Max Working Pressure 10 Bar - Max Temperature 50˚
ITEM CODE BSP METRIC mm601/0015 ½” 15601/0020 ¾” 20601/0025 1” 25601/0032 1¼” 32601/0040 1½” 40601/0050 2” 50601/0065 2½” 65601/0080 3” 80601/0100 4” 100
BALL VALVE D/U SOLVENT WELD Max Working Pressure 10 Bar - Max Temperature 50˚
ITEM CODE METRIC mm605/0020 20605/0025 25605/0032 32605/0040 40605/0050 50605/0063 63605/0090 90
CHECK VALVE S/U THREADED Max Working Pressure 10 Bar - Max Temperature 50˚
ITEM CODE BSP METRIC mm608/0015 ½” 15608/0020 ¾” 20608/0025 1” 25608/0032 1¼” 32608/0040 1½” 40608/0050 2” 50
BALL VALVE S/U SOLVENT WELD Max Working Pressure 10 Bar - Max Temperature 50˚
ITEM CODE METRIC mm604/0020 20604/0025 25604/0032 32604/0040 40604/0050 50604/0063 63604/0075 75604/0090 90604/0110 110
CHECK VALVE S/U SOLVENT WELD Max Working Pressure 10 Bar - Max Temperature 50˚
ITEM CODE METRIC mm607/0020 20607/0025 25607/0032 32607/0040 40607/0050 50607/0063 63
PLASTIC FLOAT VALVE HIGH CAPACITYMin Working Pressure 1 Bar - Max Working Pressure 6 Bar
ITEM CODE BSP METRIC mm613/0015 ½” 15613/0020 ¾” 20613/0025 1” 25613/0032 1¼” 32613/0040 1½” 40613/0050 2” 50613/0065 2½” 65
PLASTIC FLOAT VALVE MINIMin 1 Bar Max 6 Bar
ITEM CODE BSP METRIC mm614/0015 ½” 15
ABS BROWN TAP Max Working Pressure 6 Bar - Max Temperature 50˚
ITEM CODE BSP METRIC mm077/0015 ½” 15077/0020 ¾” 20
CROSS HANDLE TAPMax Working Pressure 6 Bar - Max Temperature 50˚
ITEM CODE BSP METRIC mm073/0015 ½” 15073/0020 ¾” 20
CONTAINER TAPMax Working Pressure 6 Bar - Max Temperature 50˚
ITEM CODE BSP METRIC mm072/0015 ½” 15072/0020 ¾” 20
BALL VALVE S/U THREADED Max Working Pressure 10 Bar - Max Temperature 50˚
ITEM CODE BSP METRIC mm602/0015 ½” 15602/0020 ¾” 20602/0025 1” 25602/0032 1¼” 32602/0040 1½” 40602/0050 2” 50602/0065 2½” 65602/0080 3” 80602/0100 4” 100
BALL VALVE D/U THREADED Max Working Pressure 10 Bar - Max Temperature 50˚
ITEM CODE BSP METRIC mm603/0015 ½” 15603/0020 ¾” 20603/0025 1” 25603/0032 1¼” 32603/0040 1½” 40603/0050 2” 50603/0065 2½” 65603/0080 3” 80603/0100 4” 100
BALL VALVE COMPACT SOLVENT WELD Max Working Pressure 10 Bar - Max Temperature 50˚
ITEM CODE METRIC mm609/0020 20609/0025 25609/0032 32609/0040 40609/0050 50609/0063 63609/0075 75609/0090 90609/0110 110
AUTOMATIC AIR & VACUUM RELIEF VALVEMax Working Pressure 10 Bar - Max Temperature 50˚
ITEM CODE BSP METRIC mm615/0025 1” 25
AUTOMATIC AIR & VACUUM RELIEF VALVEMax Working Pressure 15 Bar - Max Temperature 50˚
ITEM CODE BSP METRIC mm616/0050 2” 50
INLINE FILTER SPARE SCREEN SS 130 MICRONMax Working Pressure 15 Bar - Max Temperature 50˚
ITEM CODE BSP METRIC mm617A/0020-130 ¾” - 1” 20-25617A/0050-130 1¼” - 2” 32-50
SPARE ARM
ITEM CODE METRIC mm613A/0015 15613A/0020 20613A/0025 25613A/0032 32613A/0040 40613A/0050 50613A/0065 65
FILTER T INLINE 130 MICRON SS SCREEN MALE Max Working Pressure 8 Bar - Max Temperature 50˚
ITEM CODE BSP METRIC mm617/0020 ¾” 20617/0025 1” 25617/0032 1¼” 32617/0040 1½” 40617/0050 2” 50
SUNRESISTANT
PROVENDURABILITY
EXTRA STRENGTH
TOMMYPVC.COM
QUALITY PN16 uPVC FITTINGS
34 uPVC Solvent Weld Fittings
TEEPN 16 uPVC
ITEM CODE METRIC mm046/0020 20046/0025 25046/0032 32046/0040 40046/0050 50046/0063 63046/0075 75046/0090 90046/0110 110046/0160 160046/0200 200046/0250 250
ELBOW 90°PN 16 uPVC
ITEM CODE METRIC mm040/0020 20040/0025 25040/0032 32040/0040 40040/0050 50040/0063 63040/0075 75040/0090 90040/0110 110040/0160 160040/0200 200040/0250 250
SOCKETPN 16 uPVC
ITEM CODE METRIC mm041/0020 20041/0025 25041/0032 32041/0040 40041/0050 50041/0063 63041/0075 75041/0090 90041/0110 110041/0160 160041/0200 200041/0250 250
ELBOW 45°PN 16 uPVC
ITEM CODE METRIC mm049/0020 20049/0025 25049/0032 32049/0040 40049/0050 50049/0063 63049/0075 75049/0090 90049/0110 110049/0160 160
ADAPTOR MALEPN 16 uPVC
ITEM CODE METRIC mm x BSP048/0020x0015 20 x ½”048/0020x0020 20 x ¾”048/0025x0020x0015 25 x 20 x ½”048/0025x0020 25 x ¾”048/0025x0025 25 x 1’’048/0032x0025 32 x 1’’048/0032x0032 32 x 1¼”048/0040x0032x0025 40 x 32 x 1”048/0040x0032 40 x 1¼”048/0040x0040 40 x 1½”048/0050x0040 50 x 1½”048/0050x0050 50 x 2”048/0063x0050x0040 63 x 50 x 1½”048/0063x0050x0050 63 x 50 x 2”048/0063x0050 63 x 2”048/0075x0050 75 x 2”048/0075x0063x0050 75 x 63 x 2”048/0075x0065 75 x 2½”048/0090x0065 90 x 2½”048/0090x0075x0050 90 x 75 x 2”048/0090x0080 90 x 3”048/0110x0090x0080 110 x 90 x 3”048/0110x0100 110 x 4”
TEE REDUCINGPN 16 uPVC
ITEM CODE METRIC mm036/0025x0020 25 x 20036/0032x0020 32 x 20036/0032x0025 32 x 25036/0040x0020 40 x 20036/0040x0025 40 x 25036/0040x0032 40 x 32036/0050x0020 50 x 20036/0050x0025 50 x 25036/0050x0032 50 x 32036/0050x0040 50 x 40036/0063x0025 63 x 25036/0063x0032 63 x 32036/0063x0040 63 x 40036/0063x0050 63 x 50036/0075x0040 75 x 40036/0075x0050 75 x 50036/0075x0063 75 x 63036/0090x0040 90 x 40036/0090x0063 90 x 63036/0090x0075 90 x 75036/0110x0063 110 x 63036/0110x0075 110 x 75036/0110x0090 110 x 90036/0160x0110 160 x 110
ELBOW 90° FEMALEPN 16 uPVC
ITEM CODE METRIC mm x BSP042/0020x0015 20 x ½”042/0025x0015 25 x ½”042/0025x0020 25 x ¾”042/0032x0015 32 x ½”042/0032x0020 32 x ¾”042/0032x0025 32 x 1”042/0040x0032 40 x 1¼”042/0050x0040 50 x 1½”042/0063x0050 63 x 2”042/0075x0065 75 x 2½”042/0090x0080 90 x 3”042/0110x0100 110 x 4”
TEE FEMALEPN 16 uPVC
ITEM CODE METRIC mm x BSP019/0020x0015 20 x ½”019/0025x0015 25 x ½”019/0025x0020 25 x ¾”019/0032x0015 32 x ½”019/0032x0020 32 x ¾”019/0032x0025 32 x 1”019/0040x0032 40 x 1¼”019/0050x0040 50 x 1½”019/0063x0050 63 x 2”019/0075x0065 75 x 2½”019/0090x0080 90 x 3”019/0110x0100 110 x 4”
BUSH REDUCINGPN 16 uPVC
ITEM CODE METRIC mm038/0025x0020 25 x 20038/0032x0020 32 x 20038/0032x0025 32 x 25038/0040x0020 40 x 20038/0040x0025 40 x 25038/0040x0032 40 x 32038/0050x0020 50 x 20038/0050x0025 50 x 25038/0050x0032 50 x 32038/0050x0040 50 x 40038/0063x0025 63 x 25038/0063x0032 63 x 32038/0063x0040 63 x 40038/0063x0050 63 x 50038/0075x0040 75 x 40038/0075x0050 75 x 50038/0075x0063 75 x 63038/0090x0050 90 x 50038/0090x0063 90 x 63038/0090x0075 90 x 75038/0110x0063 110 x 63038/0110x0075 110 x 75038/0110x0090 110 x 90038/0160x0090 160 x 90038/0160x0110 160 x 110
35
QUALITY PN16 uPVC FITTINGS
SOCKET REDUCINGPN 16 uPVC
ITEM CODE METRIC mm ITEM CODE METRIC mm035/0025x0020 25 x 20 035/0063x0050 63 x 50035/0032x0020 32 x 20 035/0075x0040 75 x 40035/0032x0025 32 x 25 035/0075x0050 75 x 50035/0040x0020 40 x 20 035/0075x0063 75 x 63035/0040x0025 40 x 25 035/0090x0040 90 x 40035/0040x0032 40 x 32 035/0090x0050 90 x 50035/0050x0020 50 x 20 035/0090x0063 90 x 63035/0050x0025 50 x 25 035/0090x0075 90 x 75035/0050x0032 50 x 32 035/0110x0063 110 x 63035/0050x0040 50 x 40 035/0110x0075 110 x 75035/0063x0025 63 x 25 035/0110x0090 110 x 90035/0063x0032 63 x 32 035/0160x0110 160 x 110035/0063x0040 63 x 40
CAPPN 16 uPVC
ITEM CODE METRIC mm045/0020 20045/0025 25045/0032 32045/0040 40045/0050 50045/0063 63045/0075 75045/0090 90045/0110 110045/0160 160045/0200 200
STUBPN 16 uPVC
ITEM CODE METRIC mm039/0063 63039/0075 75039/0090 90039/0110 110039/0160 160039/0200 200039/0250 250039/0315 315
TABLE D BACKING RINGGalvanised
ITEM CODE METRIC mm938/0040 40938/0050 50938/0063 63938/0075 75938/0090 90938/0110 110938/0125 125938/0140 140938/0160 160938/0200 200938/0250 250
TANGIT PVC WELD
ITEM CODE SIZE ml076/100ml 100ml HP Weld076/250ml 250ml HP Weld076/500ml 500ml HP Weld
UNIONPN 16 uPVC
ITEM CODE METRIC mm047/0020 20047/0025 25047/0032 32047/0040 40047/0050 50047/0063 63047/0075 75047/0090 90047/0110 110
PIPE CLIPuPVC
ITEM CODE METRIC mm044/0020 20044/0025 25044/0032 32044/0040 40044/0050 50
ADAPTOR FEMALEPN 16 uPVC
ITEM CODE METRIC mm x BSP043/0020x0015 20 x ½”043/0025x0020 25 x ¾”043/0032x0025 32 x 1’’043/0040x0032 40 x 1¼”043/0050x0040 50 x 1½”043/0063x0050 63 x 2”043/0075x0065 75 x 2½”043/0090x0080 90 x 3”043/0110x0100 110 x 4”
QUALITY TANK FITTINGS
STRENGTH TOMMY® Tank Fittings are made of high quality fiberglass filled Polypropylene, to increase their tensile strength and resistance to chemical solvents and acids.
An independent report by the Roediger specialist laboratory concluded:
The TOMMY® [Tank Fitting] moulding is at least twice as strong as similar mouldings due to the polymer used to manufacture it, being glass filled.
UV STABALISED TOMMY® Tank Fittings are UV stabilised through the addition of Oligomeric Hindered Amine and Carbon elements. This combination allows the polymers to absorb UV radiation, and dissipate the energy as low level heat to prevent degradation from exposure to sunlight.
An independent report by the Roediger specialist laboratory concluded:
The TOMMY® samples remain 66% stronger than the other samples after a one year’s outdoor exposure.
LONGERLIFE
PERFECTSEAL
EXTRA STRENGTH
TOMMYTANKS.COM
QUALITY TANK FITTINGS
38 Polyprop Tank Fittings
BLACK BUSH REDUCING HEAVY DUTY
Material: Fibreglass Reinforced Polypropylene
ITEM CODE BSP THREAD LENGTH FLANGE DIAM.057/0050x0040 2” MALE x 1½”FEMALE 25mm 70mm
GREY BUSH REDUCING HEAVY DUTY
Material: Fibreglass Reinforced Polypropylene
ITEM CODE BSP THREAD LENGTH FLANGE DIAM.062/0050x0040 2” MALE x 1½”FEMALE 25mm 70mm
GREY BUSH REDUCINGMaterial: Fibreglass Reinforced Polypropylene
ITEM CODE BSP THREAD LENGTH062/0040x0020 1½”MALE x ¾” FEMALE 28mm
BLACK TANK CONNECTOR COMPACT LEFT HAND THREAD
Material: Fibreglass Reinforced Polypropylene Gasket - EPDM+PP Composite
ITEM CODE BSP THREAD LENGTH FLANGE DIAM.061/0040 1½” FEMALE 32mm 86mm
GREY TANK CONNECTOR COMPACT LEFT HAND THREAD
Material: Fibreglass Reinforced Polypropylene Gasket - EPDM+PP Composite
ITEM CODE BSP THREAD LENGTH FLANGE DIAM.060/0015 ½” FEMALE 20mm 54mm060/0020 ¾” FEMALE 20mm 54mm060/0040 1½” FEMALE 32mm 86mm
BLACK BUSH REDUCINGMaterial: Fibreglass Reinforced Polypropylene
ITEM CODE BSP THREAD LENGTH034/0040x0020 1½”MALE x ¾” FEMALE 28mm
BLACK TANK CONNECTOR HEAVY DUTY LEFT HAND TIGHTENING
Material: Fibreglass Reinforced Polypropylene Gasket - EPDM+PP Composite
ITEM CODE BSP THREAD LENGTH FLANGE DIAM.056/0040x0025 1½” MALE x 1”FEMALE 33mm 86mm
056/0040 1½” MALE x PLAIN 33mm 86mm056/0050x0040 2” MALE x 1½” FEMALE 33mm 86mm
056/0080 3” MALE x PLAIN (GREY) 25mm 120mm
BLACK TANK CONNECTOR HEAVY DUTY
Material: Fibreglass Reinforced Polypropylene Gasket - EPDM+PP Composite
ITEM CODE BSP THREAD LENGTH FLANGE DIAM.054/0050x0040 2” MALE x 1½” FEMALE 60mm 86mm
39
QUALITY TANK FITTINGS
BLACK TANK CONNECTOR LONG SERIES
Material: UV Stabilised ABS
ITEM CODE BSP THREAD LENGTH FLANGE DIAM.052/0015 ½” 110mm 41mm052/0020 ¾” 110mm 48mm052/0025 1” 110mm 55mm052/0032 1¼” 108mm 65mm052/0040 1½” 107mm 71mm052/0050 2” 106mm 86mm
BLACK TANK CONNECTOR MALE THREAD
Material: UV Stabilised ABS
ITEM CODE BSP THREAD LENGTH FLANGE DIAM.053/0015 ½” 97mm 41mm053/0020 ¾” 94mm 48mm053/0025 1” 90mm 55mm053/0032 1¼” 90mm 65mm053/0040 1½” 88mm 71mm053/0050 2” 88mm 86mm
BLACK TANK CONNECTOR ACID RESISTING
Material: UV Stabilised ABS Gasket - Neoprene
ITEM CODE BSP THREAD LENGTH FLANGE DIAM.055/0015 ½” 80mm 41mm055/0020 ¾” 80mm 48mm055/0025 1” 80mm 55mm055/0032 1¼” 78mm 65mm055/0040 1½” 77mm 71mm055/0050 2” 76mm 86mm
BLACK BACK NUT ACID RESISTING
Material: UV Stabalized ABS
ITEM CODE BSP METRIC mm029/0015 ½” 15029/0020 ¾” 20029/0025 1” 25029/0032 1¼” 32029/0040 1½” 40029/0050 2” 50
BLACK LONG SCREW PARALLEL THREAD
Material: UV Stabalized ABS Thread Length 120mm
ITEM CODE BSP METRIC mm027/0015 ½” 15027/0020 ¾” 20027/0025 1” 25027/0032 1¼” 32027/0040 1½” 40027/0050 2” 50
BLACK TANK CONNECTOR SHORT SERIES
Material: Polypropylene / UV Stabilised ABS
0
ITEM CODE BSP THREAD LENGTH FLANGE DIAM.050/0015 ½” 40mm 41mm050/0020 ¾” 40mm 48mm050/0025 1” 50mm 55mm050/0032 1¼” 48mm 65mm050/0040 1½” 47mm 71mm050/0050 2” 46mm 86mm
BLACK TANK CONNECTOR STANDARD SERIES
Material: UV Stabilised ABS
ITEM CODE BSP THREAD LENGTH FLANGE DIAM.051/0015 ½” 80mm 41mm051/0020 ¾” 80mm 48mm051/0025 1” 80mm 55mm051/0032 1¼” 78mm 65mm051/0040 1½” 77mm 71mm051/0050 2” 76mm 86mm
GASKETACID RESISTING NEOPRENE
ITEM CODE METRIC mm059/0015 15059/0020 20059/0025 25059/0032 32059/0040 40059/0050 50
QUALITY TANK FITTINGS
TOMMY® “CAMEL” GASKET SEALING SYSTEM
Two embedded O-rings, spaced 10mm apart, create two independent concentric barriers betweenthefittingandtankwall.
The resultant sealing force (pressure) is considerably higher as the contact area is smaller (pressure=force/area)whencomparedtoanormalgasket.
TheflexiblenatureoftheO-ringmaterialaswellasthe“doublerib”,accommodates any imperfectionsonthesealingsurfaces.
GASKET ACID RESISTING NEOPRENE
ITEM CODE METRIC mm
059/0015 15059/0020 20059/0025 25059/0032 32059/0040 40059/0050 50
MATERIAL
TOMMY® “CAMEL” gaskets are made of TPV 3655 a mixture of EPDM rubber and polypropylene.
Thermoplastic Vulcanizates are flexible, durable and perform well in extreme temperature conditions through the combination of the best attributes of natural rubber compounds and thermoplastics.
TOMMY® ACID RESISTING GASKET NEOPRENE
MATERIAL
TOMMY® Acid resisting neoprene gaskets are made of chloroprene which has weathering resistance and flame retarding qualities.
This material has moderate resistance to petroleum-based fluids, chemicals, acids and a higher tolerance for ozone, oils, fats, greases and solvents.
GASKET SPARE
ITEM CODE METRIC mm058/0015 15058/0020 20058/0025 25058/0032 32058/0040 40
Material: EPDM+PP Composite
SUNRESISTANT
EXTENDEDLIFETIME
EXTRA STRENGTH
QUALITY THREADED FITTINGS
TOMMYPVC.COM
42 Polyprop Threaded Fittings
ELBOW FxF
ITEM CODE BSP METRIC mm020a/0015 ½” 15020a/0020 ¾” 20020a/0025 1” 25020a/0032 1¼” 32020a/0040 1½” 40020a/0050 2” 50
ELBOW MxF
ITEM CODE BSP METRIC mm021a/0015 ½” 15021a/0020 ¾” 20021a/0025 1” 25021a/0032 1¼” 32021a/0040 1½” 40021a/0050 2” 50
TEE
ITEM CODE BSP METRIC mm023a/0015 ½” 15023a/0020 ¾” 20023a/0025 1” 25023a/0032 1¼” 32023a/0040 1½” 40023a/0050 2” 50
LONG SCREW PARALLEL THREAD
ITEM CODE BSP METRIC mm027/0015 ½” 15027/0020 ¾” 20027/0025 1” 25027/0032 1¼” 32027/0040 1½” 40027/0050 2” 50
BACK NUT ACID RESISTING
ITEM CODE BSP METRIC mm029/0015 ½” 15029/0020 ¾” 20029/0025 1” 25029/0032 1¼” 32029/0040 1½” 40029/0050 2” 50
CAP FEMALE
ITEM CODE BSP METRIC mm031/0015 ½” 15031/0020 ¾” 20031/0025 1” 25031/0032 1¼” 32031/0040 1½” 40031/0050 2” 50
NIPPLE MALE REDUCING
ITEM CODE BSP METRIC mm030/0020x0015 ¾” x ½” 20 X 15030/0025x0015 1” x ½” 25 X 15030/0025x0020 1” x ¾” 25 X 20030/0032x0025 1¼”x 1” 32 x 25030/0040x0032 1½” x 1¼” 40 x 32
HEXAGON BARREL NIPPLE
ITEM CODE BSP METRIC mm025/0015 ½” 15025/0020 ¾” 20025/0025 1” 25025/0032 1¼” 32025/0040 1½” 40025/0050 2” 50
PLUG MALE
ITEM CODE BSP METRIC mm032/0015 ½” 15032/0020 ¾” 20032/0025 1” 25032/0032 1¼” 32032/0040 1½” 40032/0050 2” 50
BUSH REDUCING
ITEM CODE BSP METRIC mm ITEM CODE BSP METRIC mm034/0020x0015 ¾” x ½” 20 x 15 034/0040x0020 1½” x ¾” 40 x 20034/0025x0015 1” x ½” 25 x 15 034/0040x0025 1½” x 1” 40 x 25034/0025x0020 1” x ¾” 25 x 20 034/0040x0032 1½” x 1¼” 40 x 32034/0032x0015 1¼” x ½” 32 x 15 034/0050x0015 2” x ½” 50 x 15034/0032x0020 1¼” x ¾” 32 x 20 034/0050x0020 2” x ¾” 50 x 20034/0032x0025 1¼”x 1” 32 x 25 034/0050x0025 2” x 1” 50 x 25034/0040x0015 1½” x ½” 40 x 15 034/0050x0032 2” x 1¼” 50 x 32
SOCKET
ITEM CODE BSP METRIC mm022a/0015 ½” 15022a/0020 ¾” 20022a/0025 1” 25022a/0032 1¼” 32022a/0040 1½” 40022a/0050 2” 50
SOCKET REDUCING
ITEM CODE BSP METRIC mm033/0020x0015 ¾” x ½” 20 x 15033/0025x0015 1” x ½” 25 x 15033/0025x0020 1” x ¾” 25 x 20
SUNRESISTANT
EXTENDEDLIFETIME
EXTRA STRENGTH
QUALITY INSERT FITTINGS
TOMMYPVC.COM
44 Polyprop Insert Fittings
COUPLING
ITEM CODE METRIC mm200/0015 15200/0020 20200/0025 25200/0032 32200/0040 40200/0050 50200/0065 65200/0080 80
PLUG
ITEM CODE METRIC mm203/0015 15203/0020 20203/0025 25203/0032 32203/0040 40203/0050 50
ADAPTOR MALE
ITEM CODE METRIC mm x BSP206/0015 15 x ½”206/0020 20 x ¾”206/0025 25 x 1”206/0032 32 x 1¼”206/0040 40 x 1½”206/0050 50 x 2”206/0065 65 x 2½”206/0080 80 x 3”
TEE
ITEM CODE METRIC mm201/0015 15201/0020 20201/0025 25201/0032 32201/0040 40201/0050 50201/0065 65201/0080 80
TEE MALE
ITEM CODE METRIC mm x BSP209/0015 15 x ½”209/0020 20 x ¾”209/0025 25 x 1”209/0032 32 x 1¼”209/0040 40 x 1½”209/0050 50 x 2”
TEE FEMALE
ITEM CODE METRIC mm x BSP210/0015 15 x ½”210/0020 20 x ¾”210/0025 25 x 1”210/0032 32 x 1¼”210/0040 40 x 1½”210/0050 50 x 2”
ADAPTOR FEMALE
ITEM CODE METRIC mm x BSP213/0015 15 x ½”213/0020 20 x ¾”213/0025 25 x 1”213/0040 40 x 1½”
ELBOW FEMALE
ITEM CODE METRIC mm x BSP208/0015 15 x ½”208/0020 20 x ¾”208/0025 25 x 1”208/0032 32 x 1¼”208/0040 40 x 1½”208/0050 50 x 2”
ELBOW
ITEM CODE METRIC mm202/0015 15202/0020 20202/0025 25202/0032 32202/0040 40202/0050 50202/0065 65202/0080 80
ELBOW MALE
ITEM CODE METRIC mm x BSP207/0015 15 x ½”207/0020 20 x ¾”207/0025 25 x 1”207/0032 32 x 1¼”207/0040 40 x 1½”207/0050 50 x 2”
COUPLING REDUCING
ITEM CODE METRIC mm204/0020x0015 20 x 15204/0025x0015 25 x 15204/0025x0020 25 x 20204/0032x0015 32 x 15204/0032x0020 32 x 20204/0032x0025 32 x 25204/0040x0015 40 x 15204/0040x0020 40 x 20204/0040x0025 40 x 25204/0040x0032 40 x 32204/0050x0015 50 x 15204/0050x0020 50 x 20204/0050x0025 50 x 25204/0050x0032 50 x 32204/0050x0040 50 x 40204/0065x0050 65 x 50204/0080x0050 80 x 50204/0080x0065 80 x 65
TEE MALE REDUCING
ITEM CODE METRIC mm x BSP212/0020x0015 20 x ½”212/0025x0015 25 x ½”212/0025x0020 25 x ¾”212/0032x0015 32 x ½”212/0032x0020 32 x ¾”212/0032x0025 32 x 1”212/0040x0015 40 x ½”212/0040x0020 40 x ¾”212/0040x0025 40 x 1”212/0040x0032 40 x 1¼”212/0050x0015 50 x ½”212/0050x0020 50 x ¾”212/0050x0025 50 x 1”212/0050x0032 50 x 1¼”212/0050x0040 50 x 1½”
TEE FEMALE REDUCING
ITEM CODE METRIC mm x BSP211/0020x0015 20 x ½”211/0025x0015 25 x ½”211/0025x0020 25 x ¾”211/0032x0020 32 x ¾”211/0032x0025 32 x 1”211/0040x0020 40 x ¾”211/0040x0025 40 x 1”211/0040x0032 40 x 1¼”211/0050x0020 50 x ¾”211/0050x0025 50 x 1”211/0050x0032 50 x 1¼”211/0050x0040 50 x 1½”
TEE REDUCING
ITEM CODE METRIC mm205/0020x0015 20 x 15205/0025x0015 25 x 15205/0025x0020 25 x 20205/0032x0015 32 x 15205/0032x0020 32 x 20205/0032x0025 32 x 25205/0040x0015 40 x 15205/0040x0020 40 x 20205/0040x0025 40 x 25205/0040x0032 40 x 32205/0050x0015 50 x 15205/0050x0020 50 x 20205/0050x0025 50 x 25205/0050x0032 50 x 32205/0050x0040 50 x 40
EXTRAGRIP
PERFECTSEAL
PROVENDURABILITY
GOLDMEDALCOMPRESSION.COM
QUALITY COMPRESSION FITTINGS
46 HDPE Compression Fittings
ELBOWPN 16
ITEM CODE METRIC mm105/0020 20105/0025 25105/0032 32105/0040 40105/0050 50105/0063 63105/0075 75105/0090 90105/0110 110
TEEPN 16
ITEM CODE METRIC mm108/0020 20108/0025 25108/0032 32108/0040 40108/0050 50108/0063 63108/0075 75108/0090 90108/0110 110
ELBOW MALEPN 16
ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP106/0020x0015 20 × ½” 106/0050x0032 50 × 1¼”106/0020x0020 20 × ¾” 106/0050x0040 50 × 1½”106/0025x0015 25 × ½” 106/0050x0050 50 × 2”106/0025x0020 25 × ¾” 106/0063x0040 63 × 1½”106/0025x0025 25 × 1” 106/0063x0050 63 × 2”106/0032x0015 32 × ½” 106/0063x0065 63 × 2½”106/0032x0020 32 × ¾” 106/0075x0065 75 × 2½”106/0032x0025 32 × 1” 106/0075x0080 75 × 3”106/0032x0032 32 × 1¼” 106/0090x0080 90 × 3”106/0040x0025 40 × 1” 106/0090x0100 90 × 4”106/0040x0032 40 × 1¼” 106/0110x0100 110 × 4”106/0040x0040 40 × 1½”
TEE MALEPN 16
ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP109/0020x0015 20 × ½” 109/0050x0032 50 × 1¼”109/0020x0020 20 × ¾” 109/0050x0040 50 × 1½”109/0025x0015 25 × ½” 109/0050x0050 50 × 2”109/0025x0020 25 × ¾” 109/0063x0040 63 × 1½”109/0025x0025 25 × 1” 109/0063x0050 63 × 2”109/0032x0015 32 × ½” 109/0063x0065 63 × 2½”109/0032x0020 32 × ¾” 109/0075x0065 75 × 2½”109/0032x0025 32 × 1” 109/0075x0080 75 × 3”109/0032x0032 32 × 1¼” 109/0090x0080 90 × 3”109/0040x0025 40 × 1” 109/0090x0100 90 × 4”109/0040x0032 40 × 1¼” 109/0110x0100 110 × 4”109/0040x0040 40 × 1½”
TEE FEMALEPN 16
ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP110/0020x0015 20 × ½” 110/0040x0032 40 × 1¼” 110/0075x0050 75 × 2”110/0020x0020 20 × ¾” 110/0040x0040 40 × 1½” 110/0075x0065 75 × 2½”110/0025x0015 25 × ½” 110/0050x0015 50 × ½” 110/0075x0080 75 × 3”110/0025x0020 25 × ¾” 110/0050x0032 50 × 1¼” 110/0090x0065 90 × 2½”110/0025x0025 25 × 1” 110/0050x0040 50 × 1½” 110/0090x0080 90 × 3”110/0032x0015 32 × ½” 110/0050x0050 50 × 2” 110/0090x0100 90 × 4”110/0032x0020 32 × ¾” 110/0063x0032 63 × 1¼” 110/0110x0080 110 × 3”110/0032x0025 32 × 1” 110/0063x0040 63 × 1½” 110/0110x0100 110 × 4”110/0032x0032 32 × 1¼” 110/0063x0050 63 × 2”110/0040x0025 40 × 1” 110/0063x0065 63 × 2½”
ELBOW FEMALEPN 16
ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP107/0020x0015 20 × ½” 107/0040x0020 40 × ¾” 107/0063x0065 63 × 2½”107/0020x0020 20 × ¾” 107/0040x0025 40 × 1” 107/0075x0050 75 × 2”107/0025x0015 25 × ½” 107/0040x0032 40 × 1¼” 107/0075x0065 75 × 2½”107/0025x0020 25 × ¾” 107/0040x0040 40 × 1½” 107/0075x0080 75 × 3”107/0025x0025 25 × 1” 107/0050x0032 50 × 1¼” 107/0090x0080 90 × 3”107/0032x0015 32 × ½” 107/0050x0040 50 × 1½” 107/0090x0100 90 × 4”107/0032x0020 32 × ¾” 107/0050x0050 50 × 2” 107/0110x0080 110 × 3”107/0032x0025 32 × 1” 107/0063x0040 63 × 1½” 107/0110x0100 110 × 4”107/0032x0032 32 × 1¼” 107/0063x0050 63 × 2”
SAN
S 14236 TESTED & PASSED
JASW I C A C C E PTED
47
QUALITY COMPRESSION FITTINGS
COUPLINGPN 16
ITEM CODE METRIC mm100/0020 20100/0025 25100/0032 32100/0040 40100/0050 50100/0063 63100/0075 75100/0090 90100/0110 110
ADAPTOR MALEPN 16
ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP102/0020x0015 20 x ½” 102/0040x0032 40 x 1¼” 102/0075x0050 75 x 2”102/0020x0020 20 x ¾” 102/0040x0040 40 x 1½” 102/0075x0065 75 x 2½”102/0020x0025 20 x 1” 102/0040x0050 40 x 2” 102/0075x0080 75 x 3”102/0025x0015 25 x ½” 102/0050x0025 50 x 1” 102/0090x0050 90 x 2”102/0025x0020 25 x ¾” 102/0050x0032 50 x 1¼” 102/0090x0065 90 x 2½” 102/0025x0025 25 x 1” 102/0050x0040 50 x 1½” 102/0090x0080 90 x 3”102/0032x0015 32 x ½” 102/0050x0050 50 x 2” 102/0090x0100 90 x 4”102/0032x0020 32 x ¾” 102/0063x0032 63 x 1¼” 102/0110x0050 110 x 2”102/0032x0025 32 x 1” 102/0063x0040 63 x 1½” 102/0110x0080 110 x 3”102/0032x0032 32 x 1¼” 102/0063x0050 63 x 2” 102/0110x0100 110 x 4”102/0040x0025 40 x 1” 102/0063x0065 63 x 2½”
COUPLING REDUCINGPN 16
ITEM CODE METRIC mm ITEM CODE METRIC mm101/0025x0020 25 × 20 101/0063x0032 63 × 32101/0032x0020 32 × 20 101/0063x0040 63 × 40101/0032x0025 32 × 25 101/0063x0050 63 × 50101/0040x0025 40 × 25 101/0075x0050 75 × 50101/0040x0032 40 × 32 101/0075x0063 75 × 63101/0050x0025 50 × 25 101/0090x0063 90 × 63101/0050x0032 50 × 32 101/0090x0075 90 × 75101/0050x0040 50 × 40 101/0110x0090 110 × 90101/0063x0025 63 × 25
END CAPPN 16
ITEM CODE METRIC mm104/0020 20104/0025 25104/0032 32104/0040 40104/0050 50104/0063 63104/0075 75104/0090 90104/0110 110
TEE REDUCINGPN 16
ITEM CODE METRIC mm ITEM CODE METRIC mm113/0025x0020 25 × 20 113/0063x0025 63 × 25113/0032x0020 32 × 20 113/0063x0032 63 × 32 113/0032x0025 32 × 25 113/0063x0040 63 × 40113/0040x0025 40 × 25 113/0063x0050 63 × 50113/0040x0032 40 × 32 113/0075x0063 75 × 63113/0050x0025 50 × 25 113/0090x0063 90 × 63113/0050x0032 50 × 32 113/0090x0075 90 × 75113/0050x0040 50 × 40 113/0110x0090 110 × 90
ADAPTOR FEMALEPN 16
ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP ITEM CODE METRIC mm x BSP103/0020x0015 20 × ½” 103/0040x0025 40 × 1” 103/0075x0050 75 × 2”103/0020x0020 20 × ¾” 103/0040x0032 40 × 1¼” 103/0075x0065 75 × 2½”103/0020x0025 20 × 1” 103/0040x0040 40 × 1½” 103/0075x0080 75 × 3”103/0025x0015 25 × ½” 103/0050x0032 50 × 1¼” 103/0090x0050 90 × 2”103/0025x0020 25 × ¾” 103/0050x0040 50 × 1½” 103/0090x0065 90 × 2½”103/0025x0025 25 × 1” 103/0050x0050 50 × 2” 103/0090x0080 90 × 3”103/0032x0015 32 × ½” 103/0063x0032 63 × 1¼” 103/0090x0100 90 × 4”103/0032x0020 32 × ¾” 103/0063x0040 63 × 1½” 103/0110x0080 110 × 3”103/0032x0025 32 × 1” 103/0063x0050 63 × 2” 103/0110x0100 110 × 4”103/0032x0032 32 × 1¼” 103/0063x0065 63 × 2½”
48 HDPE Compression Fittings
CLAMP SADDLE WITHOUT REINFORCING RING
PN 6
ITEM CODE METRIC mm x BSP112/0025x0015 25 × ½”112/0025x0020 25 × ¾”112/0032x0015 32 × ½”112/0032x0020 32 × ¾”112/0032x0025 32 × 1”112/0040x0015 40 × ½”112/0040x0020 40 × ¾”112/0040x0025 40 × 1”112/0050x0015 50 × ½”112/0050x0020 50 × ¾”112/0050x0025 50 × 1”112/0050x0032 50 × 1¼”112/0063x0015 63 × ½”112/0063x0020 63 × ¾”112/0063x0025 63 × 1”112/0063x0032 63 × 1¼”112/0063x0040 63 × 1½”112/0075x0015 75 × ½”112/0075x0020 75 × ¾”112/0075x0025 75 × 1”112/0075x0032 75 × 1¼”112/0075x0040 75 × 1½”112/0075x0050 75 × 2”112/0090x0015 90 × ½”112/0090x0020 90 × ¾”112/0090x0025 90 × 1”112/0090x0032 90 × 1¼”112/0090x0040 90 × 1½”112/0090x0050 90 × 2”112/0110x0015 110 × ½”112/0110x0020 110 × ¾”112/0110x0025 110 × 1”112/0110x0032 110 × 1¼”112/0110x0040 110 × 1½”112/0110x0050 110 × 2”112/0125x0015 125 × ½”112/0125x0020 125 × ¾”112/0125x0025 125 × 1”112/0125x0032 125 × 1¼”112/0125x0040 125 × 1½”112/0125x0050 125 × 2”112/0125x0080 125 × 3”112/0160x0025 160 × 1”112/0160x0050 160 × 2”112/0200x0050 200 × 2”
CLAMP SADDLE WITH REINFORCING RING PN16
PN 16
ITEM CODE METRIC mm x BSP114/0020x0015 20 × ½”114/0025x0015 25 × ½”114/0025x0020 25 × ¾”114/0032x0020 32 × ¾”114/0040x0015 40 × ½”114/0040x0020 40 × ¾”114/0040x0025 40 × 1”114/0050x0015 50 × ½”114/0050x0020 50 × ¾”114/0050x0025 50 × 1”114/0063x0015 63 × ½”114/0063x0020 63 × ¾”114/0063x0025 63 × 1”114/0063x0032 63 × 1¼”114/0063x0040 63 × 1½”114/0075x0015 75 × ½”114/0075x0020 75 × ¾”114/0075x0025 75 × 1”114/0075x0032 75 × 1¼”114/0075x0040 75 × 1½”114/0075x0050 75 × 2”114/0090x0015 90 × ½”114/0090x0020 90 × ¾”114/0090x0025 90 × 1”114/0090x0032 90 × 1¼”114/0090x0040 90 × 1½”114/0090x0050 90 × 2”114/0110x0015 110 × ½”114/0110x0020 110 × ¾”114/0110x0025 110 × 1”114/0110x0032 110 × 1¼”114/0110x0040 110 × 1½”114/0110x0050 110 × 2”
CLAMP SADDLE WITH REINFORCING RING
PN 10
ITEM CODE METRIC mm x BSP111/0025x0015 25 × ½”111/0025x0020 25 × ¾”111/0032x0015 32 × ½”111/0032x0020 32 × ¾”111/0032x0025 32 × 1”111/0040x0015 40 × ½”111/0040x0020 40 × ¾”111/0040x0025 40 × 1”111/0050x0015 50 × ½”111/0050x0020 50 × ¾”111/0050x0025 50 × 1”111/0050x0032 50 × 1¼”111/0063x0015 63 × ½”111/0063x0020 63 × ¾”111/0063x0025 63 × 1”111/0063x0032 63 × 1¼”111/0063x0040 63 × 1½”111/0075x0015 75 × ½”111/0075x0020 75 × ¾”111/0075x0025 75 × 1”111/0075x0032 75 × 1¼”111/0075x0040 75 × 1½”111/0075x0050 75 × 2”111/0090x0015 90 × ½”111/0090x0020 90 × ¾”111/0090x0025 90 × 1”111/0090x0032 90 × 1¼”111/0090x0040 90 × 1½”111/0090x0050 90 × 2”111/0110x0015 110 × ½”111/0110x0020 110 × ¾”111/0110x0025 110 × 1”111/0110x0032 110 × 1¼”111/0110x0040 110 × 1½”111/0110x0050 110 × 2”111/0125x0015 125 × ½”111/0125x0020 125 × ¾”111/0125x0025 125 × 1”111/0125x0032 125 × 1¼”111/0125x0040 125 × 1½”111/0125x0050 125 × 2”111/0125x0080 125 × 3”111/0160x0025 160 × 1”111/0160x0050 160 × 2”111/0200x0050 200 × 2”
FEMALE SINGLE UNION BALL VALVEPN 16
ITEM CODE METRIC mm x BSP121/0020x0015 20 × ½”121/0025x0020 25 × ¾”121/0032x0025 32 × 1”121/0040x0032 40 × 1¼”121/0050x0040 50 × 1½”121/0063x0050 63 × 2”
MALE SINGLE UNION BALL VALVEPN 16
ITEM CODE METRIC mm x BSP120/0020x0015 20 × ½”120/0025x0020 25 × ¾”120/0032x0025 32 × 1”120/0040x0032 40 × 1¼”120/0050x0040 50 × 1½”120/0063x0050 63 × 2”
DOUBLE UNION BALL VALVEPN 16
ITEM CODE METRIC mm115/0020 20115/0025 25115/0032 32115/0040 40115/0050 50115/0063 63
OYACLAMP.COM
EXTRASTRENGTH
UNIFORMCLAMPING
CORROSIONRESISTANT
50 Clamps
STAINLESS STEEL HEAVY DUTY BOLTED CLAMP
Bandwidth: 25mm Band Thickness: 1mm Bolt Thickness: M8
ITEM CODE RANGE SIZE mm ITEM CODE RANGE SIZE mm308/HD032SS 40-45 308/HD065SS 70-78308/HD040SS 48-54 308/HD080SS 90-98308/HD050SS 58-66
STAINLESS STEEL MEDIUM DUTY BOLTED CLAMP
Bandwidth: 19mm Band Thickness: 1mm Bolt Thickness: M6
ITEM CODE RANGE SIZE mm ITEM CODE RANGE SIZE mm307/MD020SS 23-27 307/MD050SS 54-61307/MD025SS 29-34 307/MD065SS 68-75307/MD032SS 37-42 307/MD080SS 82-89307/MD040SS 42-48
FULL STAINLESS STEEL CLAMP WORM DRIVE
Bandwidth: 2.5mm - Band Thickness: 0.7mm - Material: 301 Stainless Steel - Screw / Housing: 301 Stainless Steel
ITEM CODE RANGE SIZE mm ITEM CODE RANGE SIZE mm301/SS004 7-17 301/SS040 51-76301/SS006 10-22 301/SS044 57-82301/SS008 14-27 301/SS048 63-89301/SS012 14-32 301/SS052 71-95301/SS016 17-38 301/SS056 78-102301/SS020 19-44 301/SS060 84-108301/SS024 27-51 301/SS064 91-114301/SS028 32-57 301/SS072 105-127301/SS032 38-63 301/SS080 117-140301/SS036 44-70
MILD STEELHEAVY DUTY BOLTED CLAMP
Bandwidth: 25mm Band Thickness: 1mm Bolt Thickness: M8
ITEM CODE RANGE SIZE mm ITEM CODE RANGE SIZE mm306/HD032 40-45 306/HD065 70-78306/HD040 48-54 306/HD080 90-98306/HD050 58-66
MILD STEELMEDIUM DUTY BOLTED CLAMP
Bandwidth: 19mm Band Thickness: 1mm Bolt Thickness: M6
ITEM CODE RANGE SIZE mm ITEM CODE RANGE SIZE mm305/MD020 23-27 305/MD050 54-61305/MD025 29-34 305/MD065 68-75305/MD032 37-42 305/MD080 82-89305/MD040 42-48
COMPOSITE CLAMPWORM DRIVE
Bandwidth: 2.5mm - Band Thickness: 0.7mm - Material: 203 Stainless Steel - Screw / Housing: Zink Plated
ITEM CODE RANGE SIZE mm ITEM CODE RANGE SIZE mm304/CO002 8-12 304/CO044 57-82304/CO004 7-17 304/CO048 63-89304/CO006 10-22 304/CO052 71-95304/CO008 14-27 304/CO056 78-102304/CO012 14-32 304/CO060 84-108304/CO016 17-38 304/CO064 91-114304/CO020 19-44 304/CO068 95-121304/CO024 25-51 304/CO072 105-127304/CO028 32-57 304/CO080 117-140304/CO032 38-63 304/CO084 121-146304/CO036 44-70 304/CO088 127-152304/CO040 51-76
SSN COUPLING REDUCINGMaterial: 301 Stainless Steel
ITEM CODE SIZE mm STRAPS310/0050X0040 50 x 40 2
SSN COUPLINGMaterial: 301 Stainless Steel
ITEM CODE SIZE mm STRAPS309/0050 50 2309/0075 75 2309/0100 100 2309/0150 150 4
OYACAMLOCK.COM
CORROSIONRESISTANT
QUICKCOUPLING
WATERTIGHTSEAL
52 Camlocks
TYPE A POLYPROPMALE ADAPTOR X FEMALE THREAD
ITEM CODE SIZE mm BAR320/0015 15 8320/0020 20 8320/0025 25 8320/0032 32 8320/0040 40 8320/0050 50 8320/0080 80 5320/0100 100 5
TYPE B POLYPROPFEMALE COUPLER X MALE THREAD
ITEM CODE SIZE mm BAR321/0015 15 8321/0020 20 8321/0025 25 8321/0032 32 8321/0040 40 8321/0050 50 8321/0080 80 5321/0100 100 5
TYPE C POLYPROPFEMALE COUPLER X HOSE TAIL
ITEM CODE SIZE mm BAR322/0015 15 8322/0020 20 8322/0025 25 8322/0032 32 8322/0040 40 8322/0050 50 8322/0080 80 5322/0100 100 5
TYPE D POLYPROPFEMALE COUPLER X FEMALE THREAD
ITEM CODE SIZE mm BAR323/0015 15 8323/0020 20 8323/0025 25 8323/0032 32 8323/0040 40 8323/0050 50 8323/0080 80 5323/0100 100 5
TYPE E POLYPROPMALE ADAPTOR X HOSE TAIL
ITEM CODE SIZE mm BAR324/0015 15 8324/0020 20 8324/0025 25 8324/0032 32 8324/0040 40 8324/0050 50 8324/0080 80 5324/0100 100 5
TYPE F POLYPROPMALE ADAPTOR X MALE THREAD
ITEM CODE SIZE mm BAR325/0015 15 8325/0020 20 8325/0025 25 8325/0032 32 8325/0040 40 8325/0050 50 8325/0080 80 5325/0100 100 5
TYPE DC POLYPROPFEMALE ADAPTOR X END CAP
ITEM CODE SIZE mm BAR326/0015 15 8326/0020 20 8326/0025 25 8326/0032 32 8326/0040 40 8326/0050 50 8326/0080 80 5326/0100 100 5
TYPE DP POLYPROPMALE ADAPTOR X END CAP
ITEM CODE SIZE mm BAR327/0015 15 8327/0020 20 8327/0025 25 8327/0032 32 8327/0040 40 8327/0050 50 8327/0080 80 5327/0100 100 5
53
TYPE F ALUMINIUMMALE ADAPTOR X MALE THREAD
ITEM CODE SIZE mm BAR335/0015 15 10335/0020 20 10335/0025 25 10335/0032 32 10335/0040 40 10335/0050 50 10335/0080 80 8335/0100 100 6
TYPE E ALUMINIUMMALE ADAPTOR X HOSE TAIL
ITEM CODE SIZE mm BAR334/0015 15 10334/0020 20 10334/0025 25 10334/0032 32 10334/0040 40 10334/0050 50 10334/0080 80 8334/0100 100 6
TYPE D ALUMINIUMFEMALE COUPLER X FEMALE THREAD
ITEM CODE SIZE mm BAR333/0015 15 10333/0020 20 10333/0025 25 10333/0032 32 10333/0040 40 10333/0050 50 10333/0080 80 8333/0100 100 6
TYPE C ALUMINIUMFEMALE COUPLER X HOSE TAIL
ITEM CODE SIZE mm BAR332/0015 15 10332/0020 20 10332/0025 25 10332/0032 32 10332/0040 40 10332/0050 50 10332/0080 80 8332/0100 100 6
TYPE B ALUMINIUMFEMALE COUPLER X MALE THREAD
ITEM CODE SIZE mm BAR331/0015 15 10331/0020 20 10331/0025 25 10331/0032 32 10331/0040 40 10331/0050 50 10331/0080 80 8331/0100 100 6
TYPE A ALUMINIUMMALE ADAPTOR X FEMALE THREAD
ITEM CODE SIZE mm BAR330/0015 15 10330/0020 20 10330/0025 25 10330/0032 32 10330/0040 40 10330/0050 50 10330/0080 80 8330/0100 100 6
TYPE DP ALUMINIUMMALE ADAPTOR X END CAP
ITEM CODE SIZE mm BAR337/0015 15 10337/0020 20 10337/0025 25 10337/0032 32 10337/0040 40 10337/0050 50 10337/0080 80 8337/0100 100 6
TYPE DC ALUMINIUMFEMALE ADAPTOR X END CAP
ITEM CODE SIZE mm BAR336/0015 15 10336/0020 20 10336/0025 25 10336/0032 32 10336/0040 40 10336/0050 50 10336/0080 80 8336/0100 100 6
54 Camlocks
TYPE F STAINLESS STEELMALE ADAPTOR X MALE THREAD
ITEM CODE SIZE mm BAR345/0015 15 10345/0020 20 10345/0025 25 10345/0032 32 10345/0040 40 10345/0050 50 10345/0080 80 8345/0100 100 6
TYPE E STAINLESS STEELMALE ADAPTOR X HOSE TAIL
ITEM CODE SIZE mm BAR344/0015 15 10344/0020 20 10344/0025 25 10344/0032 32 10344/0040 40 10344/0050 50 10344/0080 80 8344/0100 100 6
TYPE D STAINLESS STEELFEMALE COUPLER X FEMALE THREAD
ITEM CODE SIZE mm BAR343/0015 15 10343/0020 20 10343/0025 25 10343/0032 32 10343/0040 40 10343/0050 50 10343/0080 80 8343/0100 100 6
TYPE C STAINLESS STEELFEMALE COUPLER X HOSE TAIL
ITEM CODE SIZE mm BAR342/0015 15 10342/0020 20 10342/0025 25 10342/0032 32 10342/0040 40 10342/0050 50 10342/0080 80 8342/0100 100 6
TYPE B STAINLESS STEELFEMALE COUPLER X MALE THREAD
ITEM CODE SIZE mm BAR341/0015 15 10341/0020 20 10341/0025 25 10341/0032 32 10341/0040 40 10341/0050 50 10341/0080 80 8341/0100 100 6
TYPE A STAINLESS STEELMALE ADAPTOR X FEMALE THREAD
ITEM CODE SIZE mm BAR340/0015 15 10340/0020 20 10340/0025 25 10340/0032 32 10340/0040 40 10340/0050 50 10340/0080 80 8340/0100 100 6
TYPE DP STAINLESS STEELMALE ADAPTOR X END CAP
ITEM CODE SIZE mm BAR347/0015 15 10347/0020 20 10347/0025 25 10347/0032 32 10347/0040 40 10347/0050 50 10347/0080 80 8347/0100 100 6
TYPE DC STAINLESS STEELFEMALE ADAPTOR X END CAP
ITEM CODE SIZE mm BAR346/0015 15 10346/0020 20 10346/0025 25 10346/0032 32 10346/0040 40 10346/0050 50 10346/0080 80 8346/0100 100 6
HIGHQUALITY
FILTRATION
CLEAN & SAFE
PUREDRINKING
WATER
TOMMYTANKS.COM
56 Polyprop Tank FittingsMineral Pots
MWF-14 - MINERAL WATER POT 14L
ITEM CODE DESCRIPTION078 Mineral Water Pot 14L
WATER PURIFIER14L - 6 STAGE FILTRATION
S1 - Ceramic FilterMade of highly compressed ceramic diatomic material which has a porous structure of 0.2 microns. It is a powerful anti bacterial and fungicidal filter cartridge, it also filters all sand, dust and rust particles.
S2 - Activated CarbonRemoves chlorine, organic chemicals, unpleasant odours and improves clarity and taste.
S3 - Small Bio BallsAdds oxygen and minerals to the water.
S4 - Ion Exchange ResinRemoves heavy metals such as mercury, lead and chromium.
S5 - ZeoliteNatural Volcanic material which has the unique ability to remove metals from the water and exchange sodium ions for calcium ions which
S6 - Mineral StonesContains various nourishing minerals such as potassium, sodium, calcium, magnesium and other micro elements which are essential for good health.
SPARETAP
ITEM CODE DESCRIPTION080 Sparetap
FILTERSCERAMIC, ALUMINITE & 6 STAGE FILTERS
ITEM CODE DESCRIPTION078 Spare 6 Stage Filter
SUNRESISTANT
EXTENDEDLIFETIME
EXTRA STRENGTH
QUALITY FAUCET FITTINGS
TOMMYPVC.COM
58 uPVC Faucet Fittings
ELBOW 90°
ITEM CODE METRIC mm151/0063 63151/0075 75151/0090 90151/0110 110151/0160 160151/0200 200151/0225 225151/0250 250151/0315 315151/0355 355
ELBOW 45°
ITEM CODE METRIC mm153/0063 63153/0075 75153/0090 90153/0110 110153/0160 160153/0200 200153/0225 225153/0250 250153/0315 315153/0355 355
COUPLING
ITEM CODE METRIC mm165/0063 63165/0075 75165/0090 90165/0110 110165/0160 160165/0200 200165/0225 225165/0250 250165/0315 315165/0355 355
REDUCING COUPLING
ITEM CODE METRIC mm ITEM CODE METRIC mm ITEM CODE METRIC mm164/0090x0063 90 x 63 164/0225x0110 225 x 110 164/0315x0160 315 x 160164/0090x0075 90 x 75 164/0225x0160 225 x 160 164/0315x0200 315 x 200164/0110x0063 110 x 63 164/0225x0200 225 x 200 164/0315x0250 315 x 250164/0110x0090 110 x 90 164/0250x0110 250 x 110 164/0355x0200 355 x 200164/0160x0110 160 x 110 164/0250x0160 250 x 160 164/0355x0315 355 x 315164/0200x0110 200 x 110 164/0250x0200 250 x 200164/0200x0160 200 x 160 164/0250x0225 250 x 225
TEE
ITEM CODE METRIC mm154/0063 63154/0075 75154/0090 90154/0110 110154/0160 160154/0200 200154/0225 225154/0250 250154/0315 315154/0355 355
FLANGE
ITEM CODE METRIC mm166/0063 63166/0075 75166/0090 90166/0110 110166/0160 160166/0200 200166/0225 225166/0250 250166/0315 315166/0355 355166/0400 400
FAUCET x FLANGE TEE EQUAL
ITEM CODE METRIC mm155/0110 110155/0160 160155/0200 200155/0225 225
RUGGEDDESIGN
UNIFORMTHREADING
HEAVYDUTY
THREADMASTER.CO.ZA
PIPE WORK MACHINERY
60
SPARE DIESRidged Type Square Type
ITEM CODE FOR PIPE BSP TYPE MACHINE TYPE MATERIAL
744/0015-0020 ½” x ¾” Ridged Type 740/0015-0050 BSP Alloy Steel
744/0025-0050 1” x 2” Ridged Type 740/0015-0050 BSP Alloy Steel
744/0065-0080(SQT80c) 2 ½” x 3” Square Type 740/0015-0080 BSP Alloy Steel
744/0065-0100(SQT100) 2 ½” x 4” Square Type 740/0015-0100 BSP Alloy Steel
COMPACT THREADER
ITEM CODE FOR PIPE BSP DIE HEAD MOTOR SPEED
740/0015-0050 ½” x 2” Manual / Automatic 750w Induction type 27 RPM
740/0015-0080 ½” x 3” Manual 900w induction type 26/11 RPM
740/0015-0100½” x 2” Manual / Automatic
900w induction type 24/10 RPM2 ½” x 4” Automatic
HINGED PIPE CUTTER
ITEM CODE FOR PIPE BSP CUTTING ROTATION
753/0050-0100 2” x 4” 90˚ - 110˚
753/0100-0150 4” x 6” 90˚ - 110˚
753/0150-0200 6” x 8” 90˚ - 110˚
TRI-STAND CHAIN VISE (CAST ALUMINIUM BASE)
ITEM CODE FOR PIPE BSP CUTTING ROTATION
723/0015-6000 ½” x 6” 90˚ - 110˚
MANUAL PRESSURE TESTING PUMP
ITEM CODE CONNECTION TESTING RANGE TANK CAPACITY VOLUME/STROKE
715H ½” BSP 0-60bar (860psi) 12L 45ml
ELECTRIC PRESSURE TESTING PUMP
ITEM CODE CONNECTION TESTING RANGE WATER FLOW POWER
715E ½” BSP 0-60bar (860psi) 2.9L/min 250w Induction
KNOXGENERATOR.CO.ZA
RELIABLEELECTRICITY
SILENT
ENERGYSAVING
62
FORCEMER SINGLE PHASE PETROL GENERATOR
MODEL GG6500BRATED OUTPUT (KVA) 5.0MAX. OUTPUT (KVA) 6.5RATED VOLTAGE(V) 220 RATED FREQUENCY(HZ) 50 DC OUTPUT 12V/8.3AFUEL TANK CAPACITY(L) 25 ENGINE MODE SPK390ENGINE TYPE 4-Stroke, Single-Cylinder,Air-cooled
ENGINE RATED OUTPUT HP 13.0
BASIC FEATURES AC Voltmeter, AC Circuit Breaker, AC Socket, Oil Alert, DC Circuit Breaker, DC Socket, Fuel Gauge
CONTINUOUS RUNNING HOURS 9 FUEL CONSUMPTION: G/HP-HOUR 374gWHEELS 10’’*2HANDLES 2
FORCEMER SINGLE PHASE DIESEL GENERATOR
MODEL DG7500SRATED OUTPUT (KW) 6.5MAX. OUTPUT (KW) 7.5RATED VOLTAGE(V) 220 RATED FREQUENCY(HZ) 50 DC OUTPUT 12V/8.3AFUEL TANK CAPACITY(L) 15 ENGINE MODE D188
ENGINE TYPE Single-cylinder, Vertical, 4-Stroke, Air-cooled, Direct-injection
ENGINE RATED OUTPUT KW 6.60
BASIC FEATURES AC Voltmeter, AC Circuit Breaker, AC Socket, Oil Alert, DC Circuit Breaker, DC Socket, Fuel Gauge
CONTINUOUS RUNNING HOURS 12NOISE LEVEL (AT 7M)DB 72 WHEELS 4 HANDLES NoneSEMI SILENT Yes
OUMA SINGLE PHASE DIESEL GENERATOR - SUPER SILENT
Model OM10CYD OM12CYD OM15CYDGensetRated power (kW) 10 12 13.6 15 15 17Rated voltage (V) 115/230 120/240 115/230 120/240 115/230 120/240Rated current (A) 86.9/43.4 100/50 118/59.1 125/62.5 130/65.2 141/70.8Rated frequency (Hz) 50 60 50 60 50 60Waveform distortion Sine wave, waveform distortion ≤ 5%Noise level 7m dB (A) 62 62 62Battery capacity (12V-Ah) 60 60 60Net weight (kg) ≤580 ≤680 ≤680Fuel tank capacity (L) 70 70 70Continuous running time (hr) 13 10 10Engine OM485 OM485 OM490Output power (kW) 17 20.4 17 20.4 21 25Structure type 4-cylinder, direct-injected, 4-strokeTotal displacement (L) 1.8 1.8 2.2Bore x Stroke (mm) 85x90 85x90 90x95Rotation speed (r/min) 1500 1800Starter system 12V Electric systemFiltration system Dry air filter, fuel filter, oil filterCooling mode Enclosed water-cooledSilencer exhaust mode Up-exhaustedCooling water tank capacity (L) 9Fuel consumption ratio (g/kW-h) ≤220Oil capacity (L) 8.3Generator OM164C OM184 OM184Rated power (kW) 10 12 13.6 15 15 17Excitation mode Brush-less self-excitationVoltage adjusting mode Automatic adjustedPole number 4Rotation speed (R/M) 1500 1800Temperature rise (°C) 125Insulation grade (Stator/Rotor) H/H degreeNo-load voltage adjusting range ≥95% ~ 105%Steady voltage adjusting rate Not exceed ± 1%Protection degree IP22Control Panel OM588Automation function Manual, automatic protection, automatic shutdown, water temperature alarm, low oil pressure alarm (oil)Display data Alternating voltage, frequency, time, charging voltage
QUALITY VALVES & FITTINGS
QUALITY FITTINGS
QUALITY VALVES & FITTINGS
PIPE WORK MACHINERY
QUALITY COMPRESSION FITTINGS
