31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995

www.hilcoind.com

Complete CNC Turning, Machining and Gear Facility

By Order of the Secured Party, Assets formerly of

A Hilco Global CompanyVested in Your Success

WEBCAST/ONSITE AUCTION

Tuesday, December 17th

• 10am Local Time

Sterling Heights, MI

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2

AUCTION DATE

TUESDAY, DECEMBER 17TH

BEGINNING AT 10AM LOCAL TIME

PREvIEW DATE

MONDAY, DECEMBER 16TH

8AM TO 4PM LOCAL & MORNING OF SALEFor eArlIer InspeCtIon, pleAse ContACt ken plAnet At 248-238-7988 or emAIl kplAnet@HIlCoGloBAl.Com

AUCTION & PREvIEW LOCATION6525 CENTER DRIVESTERLING HEIGHTS, MI 48312

DIRECTIONSFROM DETROIT METROPOLITAN AIRPORT (DTW): EXIT ONTO I-94 AND TRAVEL EAST

FOR 18 MILES TO I-75 N. TRAVEL NORTH ON I-75 FOR 8 MILES TO I-696 E. TRAVEL EAST

ON I-696 FOR 3 MILES TO MOUND RD N. TRAVEL NORTH ON MOUND RD FOR 5 MILES

TO CENTER DR. TURN RIGHT ONTO CENTER DR. AND WATCH FOR AUCTION SIGNS.

FURTHER INFORMATION• AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS. THE BUYER’S

PREMIUM WILL BE REDUCED TO 16% FOR PAYMENTS MADE BY CASH, COMPANYCHECK OR WIRE TRANSFER. AUCTION WILL BE CONDUCTED IN ENGLISH,ACCEPTING U.S. CURRENCY ONLY.

• NO REMOVAL DAY OF SALE – REMOVAL BEGINS WEDNESDAY, DECEMBER 18TH

. THEREMOVAL DEADLINE IS DECEMBER 30

THWITH HOURS OF REMOVAL BETWEEN 8AM TO

4PM MONDAY THRU FRIDAY. ITEMS LEFT ON SITE AFTER DEADLINE WILL BE DEEMEDABANDONED WITH NO RECOURSE.

• FOR FURTHER INFORMATION ON MACHINERY & EQUIPMENT, PLEASE CONTACT KEN PLANET AT 248-238-7988 OR EMAIL KPLANET@HILCOGLOBAL.COM

• FOR PAYMENTS PLEASE CONTACT LESIA JOSEPH AT 616-328-6892 OR EMAILLJOSEPH@HILCOGLOBAL.COM OR HILCO ACCOUNTS RECEIVABLE ATHIN_AR@HILCOGLOBAL.COM

• FOR CUSTOMER SERVICE, PLEASE CONTACT SANDI NEELY AT 248-254-9999 X16OR EMAIL SNEELY@HILCOGLOBAL.COM

Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any

date, sale process, terms and conditions and list of available assets.

By Order of the Secured Party, Assets formerly of

WEBCAST/ONSITE AUCTION

Designated AuctionA portion of the proceeds

from this auction will be donated toFeeding America

CNC ELECTRICAL DISCHARGE MACHINES1 – MITSUBISHI EA12D SINKER TYPE CNC ELECTRICAL DISCHARGE MACHINE, (2011), 20 Position Tool Changer, S/N EVMR20T-198, Vertical Front Door Type, Machining

Range: X – 15.7", Y – 11.8", Z – 11.8", Max Workpiece Dimensions: 39.4" x 25.59" x 13.78", Max Fluid Level 15.7", Table 27.5" x 19.6", CNC Control #C30EA-2, S/N 5834804C*,Mitsubishi #FP60EA Power Supply, Mitsubishi #T53A Dielectric Fluid Resevoir, Pendant Control, Kouwa #GK-50-LFV-DE Liquid Tuner, Thielock #CPS-3D240 Power Conditioner

1 – MITSUBISHI EA12V M ADVANCE SINKER TYPE CNC ELECTRICAL DISCHARGE MACHINE, S/N 58E1A056, (2008), Advance Control, Machining Range: X – 15.7", Y – 11.8", Z – 11.8", Max Workpiece Dimensions: 31.4" x 21.6" x 9.9", Max Fluid Height 11.8", Mitsubishi #FP80V-A Power Supply & Pendant,S/N J12VAMA056, Kouwa #GK-50-LFV-BJ-C Liquid Tuner, Thielock CPS-3Y Power Conditioner

1 – MITSUBISHI FA10S ADVANCE WIRE CUT CNC ELECTRICAL DISCHARGE MACHINE, S/N 08D1A 144, (2008), Advance Control, Machining Range: X – 13.8”, Y – 9.8”, Z – 8.6”, Automatic Elevation Tank Type, Automatic Threader, Pendant, Mitsubishi #TFA10S-A Die Electric Fluid Reservoir, Mitsubishi #HE-SV50-W2 Unit Cooler

QUANTITY OF System 3R Quick Change EDM Tooling

2008 2011

For more information, please visit us on the web at www.hilcoind.com 3

CNC EDM’s • GEAR GRINDERS, SHAPERS & SHAVERS

2008

7-AxisHelical

GEAR SHAVERS1 – RED RING GS GEAR SHAVER, S/N GS 1007, Cutter Head 9" Diameter, Table 7.5" x 39", Table

Power Swivel – 0 to 25 Degrees, Coolant, Philips Magna-drum Chip Removal Conveyor1 – RED RING GEAR SHAVER, S/N GC1-1372, Cutter Head 9" Diameter, Table 8" x 35.5", Headstock

& Tailstock S/N 0268, Head Swivel 0 to 25 Degrees

1 – RED RING GC1-18 GEAR SHAVER, S/N GC1-1603, Head Swivel 0 to 25Degrees, Headstock & Tailstock

1 – RED RING GCY GEAR SHAVER, Cutter RPM (9): 71-281, Head SwivelCCW & CW – 0 to 25 Degrees, Power Up & Down Feed, Power Table, PowerTable Swivel 0-25 Degrees

GEAR GRINDERS1 – HOFLER HELIX 700K 7-AXIS CNC GEAR GRINDER, S/N 703

(2001), Helix Angle Left + Right Max 45 Degree, Module Min 1 mm –Max Approx 15 mm, Workpiece Tip Dia. Max 700 mm, Workpiece RootDia. Min 10 mm, Profile Height Max 35 mm, Gear Width Max 330 mm,Tool – Max Outside Dia of Grinding Wheel 300 mm, Grinding SpindleMax RPM 5400, Table Diameter 300 mm, Grinding Stroke Max 350mm, BWO CNC Control, Ernst Furrer Chiller, Reber KompactbandfilterFiltration Unit, (Located in Howell, MI - Call for inspection)

1 – FELLOWS REISHAUER 12 FR GG 12" GEAR GRINDER, S/N32896-4601, External Gear Capacity to 12" OD, 5.5 HP Drive,Coolant, Power Clamp, No. 3 Morse Taper, Aercology#E500Mist/Smoke Collector

2 – VINCO 68-12 GEAR/SPLINE GRINDERS, S/Ns 68-203, 68-6, Table8" x 50", Auto Index, Powered Headstock, Tailstock

LARGE QUANTITY OF Change Gears, Hobber Tooling, Cutters, Risers

GEAR SHAPERS1 – FELLOWS 7 GEAR SHAPER, S/N N/A, Michigan Tool Company

Universal Helical Guide, S/N F-687, Table to Cutting Head approx. 9", Cutter Strokes per Revolution (7) 510 to 1620, Swivel Base 0 to 45Degree R & L

6 – FELLOWS 7A 7" HIGH SPEED GEAR SHAPERS, S/Ns 27384, 27144,26387, N/A, Table to Cutting Head approx. 9" Max, Feed Per Stroke inInches: .0012 – .006, Strokes of Cutter/Revolution of Cutter (7): 510 to 1620,2 HP Motor

1 – FELLOWS 7125A 7" HIGH SPEED GEAR SHAPER, S/N 30477, Feedper Stroke in Inches (7): .0019 – .006,

1 – FELLOWS 7 GEAR SHAPER1 – FELLOWS 715A 7" HIGH SPEED GEAR SHAPER, S/N 27384 151,

Feed per Stroke in Inches (7): .0019 – .006 1 – FELLOWS #6 GEAR SHAPER, S/N N/A with Michigan Tool

Company Universal Helical Guide1 – FELLOWS 6A TYPE 645A32503 GEAR SHAPER, S/N 28543, Max.

External & Internal Pitch Diameter 18", Strokes per Minute: 50-153 &98-300, Feed per Stroke in Inches (6): .0019 – .0044,

1 – FELLOWS 6A TYPE 645A GEAR SHAPER, S/N 32997-461, Max.External & Internal Pitch Diameter 18", SPM 50-153 & 98-300, Feed perStroke in Inches (6): .0019 –.0044, Tilt Table – 15 Degree, 3 HP Motor

GEAR HOBBERS & ANALYZERS • CNC MACHINING CENTERS

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4

GEAR HOBBERS1 – PFAUTER PE-150 6-AXIS CNC GEAR HOBBER, S/N 26638, Max Workpiece Diameter 6",

Allen Bradley Series 8200 CNC Control, Bosch Servo Drives, Chip Conveyor 12" Wide, AAFDynapure Mist Collector

1 – BARBER COLMAN 1616 16" GEAR HOBBER, S/N 3438, Surface Speeds of Hob/Hob RPM(9): 59-246, 2 HP Motor, Max Travel of Hob Slide 16", RPM of Hob (9): 59-246, Feeds ofRevolution of Work: .00750" – .11250", Coolant

1 – BARBER COLMAN #16-36 GEAR HOBBER, S/N 788, Single Thread Worm, Hob CarriageTravel Approx. 36”

2 – BARBER COLMAN 3 HORIZONTAL GEAR HOBBERS, S/Ns 2078, 876, Max Work Face 7"

1 – BARBER COLMAN GEAR HOBBER, S/N 1204, Single Thread Worm, Hob Carriage TravelApprox. 13”

GEAR ANALYZERS & MEASURING MACHINES1 – M&M 3015 3000 QC GEAR ANALYZER, S/N 5936, Max. Tailstock to Center Distance 21",

Plate Diameter 12", Index Arm Height Range Approx. 1" – 15" & Lateral Travel Approx. 12",IBM 350-P100 PC, HP Laser Jet 5P Printer

1 – M&M 2025 4-12-12 GEAR ANALYZER, S/N 5168, Max Tailstock to Center Distance 30",Index Arm Height Travel Approx. 24" & Lateral Travel Approx. 10", Plate Diameter 13"

1 – ILLITRON 3412-A-3C VARIABLE INVOLUTE GEAR MEASURING MACHINE, S/N 10762,Electronic Recorder #1606-3, S/N 10701, Approx. Distance between Holders 30" Max,Heidenhain Scale #D 2/1-B0R2X2, S/N 21614

1 – FELLOWS 12H LEAD GEAR MEASURING MACHINE, S/N 34250, Max Pitch DiameterApprox 12", Head Stock & Tail Stock

1 – FELLOWS 12M INVOLUTE GEAR MEASURING MACHINE, S/N 27242-155, Max PitchDiameter Approx 12", Max Movement of Pointer Holder 4", Max Movement Work Spindle 4",Max Distance Between Centers 17", Fellows Variance Printer, Fellows Indicator .0001"/.0025mm Increments

1 – FELLOWS REDLINER GEAR TESTER, S/N 33809

CNC HORIZONTAL MACHINING CENTERS1 – MORI SEIKI SH 630 4-AXIS CNC HORIZONTAL MACHINING CENTER,

S/N 223, (1997) Twin Pallets 24.8" x 24.8" (630 mm x 630 mm), 1 DegreeIndex Table, Travels: X – 33.1”, Y – 29.9”, Z – 33.1”, 120 Position ATC –50 Taper, Max Spindle Speeds 10,000, Coolant Through Spindle – CoolJet System 1,000 PSI, MSC-516 CNC Control, Turbo #6298-8816 – 18"Chip Conveyor

1 – MORI SEIKI MH-50 CNC HORIZONTAL MACHINING CENTER, S/N711, Twin Pallets – 19.69" x 19.69", Turn Type Automatic Pallet Changer,Minimum Table Indexing Angle 1 Degree, 60Position ATC – 50 Taper,Travels: X – 31.5", Y – 25.59", Z – 29.53", Distance Table Surface toSpindle Center 1.97" – 27.56", Spindle Speeds 6,000 Max, MF-M6 CNCControl, Turbo #6475-8564 – 12" Chip Conveyor

1 – CINCINNATI MILACRON 10HC-1500-A HORIZONTAL NCMACHINING CENTER, S/N 950520386-0107, Rotary Table 30" Diameter, Work Plate 26" x 31", Travels: X – 60", Y – 40", Z – 30",Spindle Nose to Centerline of Table 5 3/8" – 35 3/8", Acramatic 900Control, 30 Position ATC

CNC VERTICAL MACHINING CENTERS1 – MORI SEIKI MV-45 3-AXIS CNC VERTICAL MACHINING CENTER, S/N 1269, Table 18" x 47",

30 Position ATC – 40 Taper, Travels: X – 31.5", Y – 18.11", Z – 20.08", Spindle Nose to Table 5.91" – 25.98", Spindle Speeds 6,000 Max, Fanuc 10M CNC Control, Daikin AKD 100K Chiller

1 – FADAL VMC 4020 3-AXIS CNC VERTICAL MACHINING CENTER, S/N 8902094, Table 20" x 48",21 Position ATC – 40 Taper, Travels: X – 40", Y – 20", Z – 20", Spindle Nose to Table 4" – 24", Spindle Speeds 75 – 10,000 RPM, Fadal CNC 88 Control

1 – CINCINNATI MILACRON 10VC-1000 CNC VERTICAL MACHINING CENTER, S/N 9507D0387-0108, Table 20" x 44", 24 Position ATC – #45 V-Flange, Travels: X – 40", Y – 20", Z – 20", SpindleSpeeds 40 – 6,000 RPM, Acramatic 850 Control, Z-Axis Drive 10 HP

2 – PRATT & WHITNEY FANUC TAPE DRILL MATE CNC VERTICAL MACHINING CENTERS, S/Ns 811196, 9042568, Fanuc OM CNC Control, 10 Position Tool Holder, Table 15" x 25 1/2", ApproxTravels: X – 19.6", Y – 14.9", Z – 11.8"

1 – ANAYAK 8 CNC CNC VERTICAL MACHINING CENTER, Table 19” x 43”, GE Fanuc O-M CNC Control

OVER 750 TOOL HOLDERS: 50 Taper, 45 Taper, 40 Taper & 30 Taper

CNC TURNING CENTERS • BORING MILL • LATHES

For more information, please visit us on the web at www.hilcoind.com 5

CNC TURNING CENTERS1 – IKEGAI TU30 2-AXIS CNC TURNING CENTER, S/N 53645V,

Bar Capacity 3.5”, Max Swing over Cross Slide 16.5”, Spindle Speeds2,500 Max, Center Distance Max 40”, 15" Diameter 3-Jaw Chuck,Tailstock, 12 Position Turret, Fanuc 18i-T CNC Control, MachineProduction #T5526-01, Enomoto 8" Wide Chip Conveyor

1 – MAZAK QUICK TURN 15N 2-AXIS CNC TURNING CENTER, S/N 86191, Bar Capacity 2", Max Swing 17.2", Max Turning Diameter11.8", 8 Position Turret, Max RPM 3000, Mazatrol T32-2 CNC Control,Tail Stock, Chip Conveyor, Parts Catcher, 3-Jaw Chuck 8" Diameter

1 – MONARCH PREDATOR 200 X 600 2-AXIS CNC TURNING CENTER, S/N 54211, (1995), GE Fanuc 18-T CNC Control, Tail Stock, Swing Kitigawa#B210 Chuck, 12 Position Turret, Turbo #6475-8685 – 6" Chip Conveyor

1 – MORI SEIKI SL-20 2-AXIS CNC TURNING CENTER, S/N 440, SwingOver Bed 18.89", Distance Between Centers 24", Standard MachiningDiameter 8.267", Max Machining Length 20.47", Spindle Speeds 35-3500, Spindle Bore 2.2", 8" Diameter 3-Jaw Chuck, Tailstock, 10 Position Turret, Fanuc 10T CNC Control, Main Spindle Motor 7.5 HP,Turbo 6" Wide Chip Conveyor

1 – CINCINNATI 10 CINTURN COMPACT UNIVERSAL 2-AXIS CNCTURNING CENTER, S/N 5311U10-81-021, 10" Diameter 3-Jaw Chuck,Tailstock, 7-Position Turret, Spindle Speeds 1000-3000, 30 HP RelianceDC Super RPM Motor, Acramatic 900 Control, S/N 51-S900 L15F-0469,Mayfran Chip Tote Chip Conveyor, S/N 819013,

1 – CINCINNATI CINTURN 8 2-AXIS CNC CHUCKER, S/N 5320C08-83-019,8" Diameter 3-Jaw Chuck, Tailstock, 6-Position Turret, Steady Rest,Coolant, Jorgenson 6" Wide Chip Conveyor, Acramatic 900 Control, S/N 51-900AT15K-0105

TABLE TYPE HORIZONTAL BORING MILL1 – SHIBAURA BT-10B-R-PD TABLE TYPE HORIZONTAL BORING MILL, S/N 6759, Spindle Diameter 3.94"

(100 mm), Taper MT#6, Table 44.1" x 42.9" (1250 mm x 1120 mm), Rapid Rotation Table 1 RPM, MillingSpindle Diameter 8.86", Spindle Travel 28", Headstock Travel 49.2", Table Saddle Travel 44.5", Table CrossTravel 55.2", Control S/N 193610, Tool Power Clamp, Bausch & Lomb Acu-Rite II DRO

LATHES1 – CLAUSING COLCHESTER 21" ENGINE LATHE, S/N 8/0225 / 05116, Swing 21" x Centers 80", Hole Through Spindle

3.5", 12" Diameter 3-Jaw Chuck, Tail Stock, Cross Slide, Inch/Metric, Spindle Speeds 18-1400, Coolant

1 – MORI SEIKI MR1500 21" SWING X 60" CENTERS ENGINE LATHE, S/N 3326, Hole Through Spindle 2", 12" Diameter3-Jaw Chuck, Tail Stock, Cross Slide, Spindle Speeds 28-1350

1 – LEBLOND 19" SWING X 54" CENTERS ENGINE LATHE, S/N 8F-2339, Hole Through Spindle 1 3/4", 12" Diameter 3-Jaw Chuck, Tail Stock, Cross Slide, Anilam 2-Axis DRO, 10 HP Motor

1 – LEBLOND REGAL SERVO SHIFT 19" SWING X 54" CENTERS ENGINE LATHE, S/N 8E-2340, Hole Through Spindle1 3/4", 12" Diameter 3-Jaw Chuck, Tail Stock, Cross Slide, Steady Rest

1 – AMERICAN PACEMAKER 20 X 48 M.D. 20" SWING X 48" CENTERS ENGINE LATHE, S/N 4570-55, Hole ThroughSpindle 1 3/4", 15" Diameter 3-Jaw Chuck, Cross Slide, Tail Stock, Acu-Rite DRO

2 – HARDINGE HC PRECISION CHUCKING LATHES, S/Ns HC-4217-P & N/A, 8-Position Turret, Spindle Speeds 125 – 3000,Carriage Feed Control, Max Distance Turret Face to Spindle 14", Cross Slide Travel 4 1/2", One w/Model AT TracerAttachment, 1.5 HP Motor, Coolant

1 – HARDINGE HNC TURRET LATHE, S/N HNC867, Dovetail Bed 7" x 34", 6-Position Turret, 2.5 HP Motor

Partial Listing Only,

Please Visit Our Website

www.hilcoind.comFor Complete Lot Catalog

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)6

GRINDERS • SAWS • MILLS • ANGLE PLATES • INDEXERS • ROTARY TABLES

GRINDERS1 – SHIGIYA GUA-30-100 UNIVERSAL CYLINDRICAL GRINDER, S/N 360083, Swing Over Bed Approx.

11.8", Distance Between Centers 40", Max Grinding Diameter Approx. 10.6", Table Swivel Range – 7 Degrees CCW & 1 Degree CW, Coolant, Automatic Table Feed, Wheel Feed/Fine Wheel Feed,Operation: Plunge / Manual / Traverse

1 – LANDIS 2R 10" X 24" UNIVERSAL CYLINDRICAL GRINDER, S/N 79068, Swing 14", Centers 36",Landis Micro Swivel Head

1 – LEONARD M350 GRIND-R-LAP GRINDER, S/N 1144, Grinding Wheel 5" Diameter, Tilt Table

1 – DUMORE 57-011 TOOL POST GRINDER, S/N 8476-03353

1 – BROWN & SHARPE 8" X 24" SURFACE GRINDER, S/N 062079, Magnetool Electromagnetic Chuck 8" x 24"

1 – REID 8X24 HYDRAULIC SURFACE GRINDER, S/N 22188, Walker Electromagnetic Chuck 8" x 24", 3 HPMotor, Down Feed, Coolant, Power Cross Slide

1 – CHEVALIER FSG-618 SURFACE GRINDER, S/N 02-02020, Table 6" x 18", Chuck 6" x 12", 1 HP Motor

1 – OKAMOTO PFG-618 LINEAR SURFACE GRINDER, S/N 1215, Electromagnetic Chuck 6" x 18",FluxMaster Chuck Control, Motor 1.5 KW Motor

1 – REID 6X18 WCI ROLLERWAY SURFACE GRINDER, S/N 22141, Electromagnetic Chuck 6" x 12", HitachiChuck Control, 1 HP Pope Drive

2 – PARKER MAJESTIC 2 6" X 18" SURFACE GRINDERS, S/Ns 910-SCM-56, SRE-E-3945-ZM-81, Chuck6" x 18", 1 HP Motor

1 – PARKER MAJESTIC I.D. GRINDER, S/N 2449-16-INT-85, Workhead 1 HP, Table 5" x 37", 6-Jaw 6" Diameter Chuck, Coolant

1 – PARKER MAJESTIC I.D. GRINDER, S/N 1803-B-63, Table 5" x 42", 1 HP Grinding Spindle

1 – LIVNICA #AII-550 OD GRINDER, S/N 2213, Centers Approx. 18”

1 – BROWN & SHARPE 13 OD GRINDER, Table Swivel 0-90 Degrees, Mitutoyo 2-Axis DRO

1 – BROWN & SHARPE 13 UNIVERSAL & TOOL GRINDER, S/N N/A, Mitutoyo 2-Axis DRO, Head Stock 1/4 HP

SAwS1 – HEM H105A 14" X 16" (W) AUTOMATIC HORIZONTAL BAND SAW, 5 HP Motor, Automatic

Clamp & Arm Control, Conveyor

1 – WELLS W9 HORIZONTAL BAND SAW, S/N 864164

1 – DOALL 16 SFP 16" VERTICAL BAND SAW, S/N 79-571583, Tilt Table 24" x 24"

1 – ROLL IN 11" VERTICAL BAND SAW, Table 18 3/4" x 30 1/2"

MILLS1 – BRIDGEPORT VERTICAL MILLING MACHINE, S/N 150357, Power Feed Table 9" x 48",

Spindle Speeds 50-4200, 2 HP

1 – ALLIANT VERTICAL MILLING MACHINE, S/N 75077798, Power Feed Table 9" x 48",Spindle Speeds 60-4500, Acu-Rite 2-Axis DRO

2 – BRIDGEPORT SERIES I VERTICAL MILLING MACHINES, S/Ns 204873, 183061, Table 9" x 42", 2 HP Motor

2 – BRIDGEPORT VERTICAL MILLING MACHINES, S/Ns 165853 & 165845, Table 9" x 42",One w/Bridgeport Shaping Attachment, S/N E10401, Anilam Mini Wizard 2-Axis DRO, Motor1.5 HP

3 – BRIDGEPORT SERIES I VERTICAL MILLING MACHINES, S/Ns J-1658A & N/A, Table 9" x 42", 2 HP Motor, DRC 2-Axis DRO

1 – HITACHI SEIKI HORIZONTAL MILLING MACHINE, Table 13" x 61", Spindle RPM 12-1500

1 – KENT OWENS 1 14 HORIZONTAL MILLING MACHINE, S/N 1 14-1019, Table 5.5" x 28",Feed Rate 1-55 IPM, 1 HP Motor, Coolant

ANGLE PLATES / INDEXERS / ROTARY TABLES6 – ANGLE PLATES from 12” x 42” to 18” x 52”

1 – TROYKE CS-9 9" X 9" CROSS SLIDE TABLE, S/N 32678

1 – VOSLTRO ROTARY MILLING HEAD

1 – HAAS AUTOMATIC DIGITAL INDEXING HEAD, S/N 74450, Haas 5C Control

1 – SPI INDEXING & GRINDING FIXTURE

1 – SYSTEM 30 RT-5C INDEXER, S/N 910201 / N243

1 – MOTORIZED INDEXER, PNC-100 Control with Haas Rotary Head

1 – PRATT & WHITNEY 24" PLAIN OPTICAL ROTARY TABLE, S/N 26018

1 – NIKKEN NST-500 500 MM (19.7") TILTING ROTARY TABLE, S/N 1007, 90 Degree Tilt

1 – SIP TYPE PI-5 17.625" DIAMETER TILTING ROTARY TABLE, S/N 1964

2 – YUASA 550-210 10" DIAMETER TILTING ROTARY TABLES

1 – WALTER RT320 TG 12.5" (320 MM) DIAMETER ROTARY TABLE, S/N 3367

1 – YUASA 550-052 12" VERTICAL/HORIZONTAL ROTARY TABLE

2 – NIKKEN RSI-10 8.375" VERTICAL/HORIZONTAL ROTARY TABLES, S/N 1514 W/Chuck& S/N 1357

1 – 12" MOTORIZED ROTARY TABLE

1 – BRIDGEPORT 12" DIAMETER ROTARY TABLE, S/N 1787

1 – EXCEL 10" DIAMETER ROTARY TABLE, S/N 142163/38

1 – HAAS 9" DIAMETER ROTARY TABLE, S/N 705, Haas Servo Control

1 – HARTFORD 8.5" VERTICAL/HORIZONTAL ROTARY TABLE

INSPECTION • MISCELLANEOUS SHOP EQUIPMENT • AIR COMPRESSORS

For more information, please visit us on the web at www.hilcoind.com 7

INSPECTION1 – BROWN & SHARPE 9-12-9 XCEL VALIDATOR COORDINATE MEASURING

MACHINE, S/N 0790-116, Granite Plate 72" x 50", Travels: X – 35.4" (900 mm),Y – 47.2" (1200 mm), Z – 35.4" (900 mm), Renishaw #PH9 Probe Head, S/N D34098, #PHD9 Probe Head Drive Unit, Avail Software, Dell Computer, HP Laser Jet 1160 Printer

1 – BROWN & SHARPE MICROVAL TABLE TOP COORDINATE MEASURINGMACHINE, S/N 088953, Approx Travels: X – 14", Y – 17", Z – 14", Granite Plate24" x 18", Tesa P/N 039 60181M Pendant, S/N 2C 003 V3.1, Epson LQ-590Printer

1 – CLASSIC 20 OPTICAL COMPARATOR, 3 Lenses – 10x , 20x & 50x

1 – SERIES 20 13" TABLE TOP OPTICAL COMPARATOR, S/N GS1432271185,Quality Measurement Systems Auto Comp I 2-Axis DRO

1 – SHEFFIELD ACCUTRON ELECTRIC COMPARATOR, S/N 319

1 – TUMICO OPTICAL COMPARATOR, S/N 1255

2 – MICROVU M14 14" OPTICAL COMPARATORS, S/Ns 3377 & 3281

1 – PRECISION DEVICES PDA-3-6 SURFOMETER, S/N 1537

1 – PRECISION DEVICES PDA-451 SURFOMETER, S/N 831, Granite Plate 18" x 24", PDA #401 Amplifier Control, S/N 5524, P/N 5950-FA

1 – ROCKWELL 3VR HARDNESS TESTER, S/N 105

1 – CLARK S8A HARDNESS TESTER, S/N 1801

1 – GOKO SEIKI 3R HARDNESS TESTER, S/N 8933

15 – 36" X 72" X 6" GRANITE SURFACE PLATES from 18” x 24” to 36” x 72”

LARGE QUANTITY OF INSPECTION EQUIPMENT Including Digital HeightGauges & Height Master Gauges: Mitutoyo/Brown & Sharpe, Block Gauges,Internal Chek Gauges, Thread Gauges, Micrometers, Square Gauges, Air Gauges,Air Gauges, Snap Gauges, Shadow Gauges

MISC SHOP EQUIPMENT1 – F SERIES STAKE BED TRUCK, VIN 1FDNF80C0WVA32516, Stake Bed

14' x 8', Rear Dual Tires, Odomoter Reads 188,949 Miles, GVWR 26,000 Lb,Cummins 5.9 L Engine, #B5.9-190, Engine #56387024, 190 HP, ManualTransmission

15 – LYON & LISTA MULTI DRAWER CABINETS

2 – SUNNEN MBB-1660 HONES, S/Ns 90412 & 84945, 1/2 HP Motor, AssortedStones & Tooling

1 – SUNNEN MBB-1800 HONE, S/N 73365

1 – TENNANT 5700 WALK BEHIND FLOOR SCRUBBER

1 – GISHOLT 1SV SIZE 1 MASTERLINE BALANCER, S/N 4626X2, 2 HP Motor

1 – AMERICAN XA-175-B HORIZONTAL BROACH, Stroke Approx. 28", 5 HP Motor

2 – DAREX DRILL SHARPENERS, S/Ns 58096 & 56335

1 – MOORE 1.5 JIG BORER, S/N J610, Table 10.5" x 20", 1.5 HP Adj Speed Drive

1 – TRINCO 18" X 24" X 12" H BLAST CABINET, S/N 46151, Dust Collector

1 – GRUENBERG 12 KW ELECTRIC OVEN, S/N 25804, Chamber 36" D x 24" Wx 48" H, Roll-In Tray, Honeywell Recorder

1 – BUILD ALL CORP DM32 RECIRCULATING TYPE PARTS CLEANER

1 – AQUA SCRUB PARTS CLEANER

1 – ALMCO VIBRATORY FINISHER

1 – RODGERS HYDRAULICS KDS-50 50 TON H-FRAME SHOP PRESS, S/N1237-G66, Between Posts 36", Bed 14", OTC Series 18 2-Stage Hydraulic Unit

1 – LUMA ELECTRIC 460 DEMAGNETIZER, S/N 8560

1 – BALDOR 1022W DOUBLE END PEDESTAL GRINDER, S/N X071024709, 1 HP Motor

1 – MOBILE HOIST, With Omega #44980 8 Ton Crane Jack

1 – POWERMATIC 1200 20" DRILL PRESS, S/N 2-3152-2, Table 16" x 18", 1 HPMotor, Spindle Speeds 105-2000

1 – POWERMATIC 1150 15" DRILL PRESS, S/N 415V476

5 – DOUBLE SIDED & SINGLE SIDED BAR STORAGE RACKS

QUANTITY OF BAR STOCK Including Sizes to 8 1/2" OD, Types include: 4150 /1040 / 1045 / 1053

QUANTITY OF C-Clamps, Pallet Jack, Steel Work Tables, Work Benches, BenchTop Vises, Etc.

AIR COMPRESSORS & DRYER1 – AIR COMPRESSOR, Micromat Control

1 – 25SST 25 HP AIR COMPRESSOR, Tank Mounted

1 – DE107 AIR DRYER

OFFICE EQUIPMENT1 – HEWLETT PACKARD 7596C DRAFT MASTER RX PLUS COLOR PLOTTER,

S/N 3125A01821, HP-GL/2 Language

1 – HEWLETT PACKARD DESIGN JET 510 COLOR PLOTTER, S/N MY28D83007

1 – MERIDIAN TELEPHONE SYSTEM, MOX16 Modules

QUANTITY OF OFFICE FURNITURE Including Conference Tables, OfficeWorkstations, Desks, Chairs, Photo Copiers, Printers, Break Room Tables & Chairs

31555 W. Fourteen Mile Road, Suite 301Farmington Hills, MI 48334Ph: 248-254-9999Fx: 248-254-9995

www.hilcoind.com

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 2655

HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Printed in USA • VAL2228 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Terms of SaleAn 18% buyer's premium will be charged on all assets. Thebuyer’s premium will be reduced to 16% for paymentsmade by cash, company check or wire transfer. Everythingwill be sold to the highest bidder for cash, in accordancewith the Auctioneer’s customary “Terms of Sale”, copies ofwhich will be posted on the premises of the sale and sub-ject to additional terms announced the day of sale. All itemswill be sold “as is, where-is” without any warranties,expressed or implied. Although obtained from sourcesdeemed reliable, the Auctioneer makes no warranty or guar-antee to the accuracy of the information herein contained.Bidders are encouraged to thoroughly inspect the items onwhich they intend to bid prior to sale. Absolutely no itemswill be removed until the day after the conclusion of the saleand payment is made in full. Subject to additions, deletionsand prior sale. For updated information, please visit ourwebsite at www.hilcoind.com for any date, sale process,terms and conditions and list of available assets.

Payment: ALL PURCHASES MUST BE PAID IN FULL ONTHE DAY OF THE AUCTION. If you intend to pay by wiretransfer, we will accept payment the day after the sale ONLYIF a deposit of 25% of total purchases is made on the dayof the sale. Contact our office for wire transfer instructions.Only cash, wire transfer or certified check, payable to HilcoIndustrial will be accepted. Company checks payable toHilco Industrial will be accepted only if accompanied by abank letter of guarantee, (see sample letter below). All salesare subject to sales tax. Purchasers claiming exemptionsfrom taxes must provide proof satisfactory to theAuctioneer of their entitlement to claim such exemptions.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at the Auctionof Valiant Industries, Inc. on December 17, 2013.

FollowUs on:

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

A Hilco Global Company

Vested in Your Success

WEBCAST/ONSITE AUCTION

Complete CNC Turning, Machining and Gear Facility

By Order of the Secured Party, Assets formerly of

Tuesday, December 17th

• 10am Local Time

Sterling Heights, MI