Date post: | 22-Jan-2023 |
Category: |
Documents |
Upload: | khangminh22 |
View: | 0 times |
Download: | 0 times |
Inside: Annual review of mergers & acquisitions
Inside: Sustainable protection against microbial growth
LEADING JOURNAL FOR THE COATINGS INDUSTRY IN EUROPE AND THE MIDDLE EAST
VOL 207 – NO 4628 FEBRUARY 2017
MECS Dubai 2017Complete listing of companies at
the Middle East Coatings Show in March
WATERBORNE COATINGS • MERGERS & ACQUISITIONS • BIOCIDES • PROTECTIVE COATINGS
Vice-President of the United Arab Emirates and Ruler of Dubai,His Highness Sheikh Mohammed bin Rashid Al Maktoum
SECTION REPORT
1 PPCJ • February 2017 www.coatingsgroup.com
CONTENTS
VOL 207 No 4628 February 2017
Biocides
18 It’s in the can
In-can protection has developed further to provide manufacturers
an enhanced range of preservatives
22 Sustainability
As an important ingredient for in-can preservation, biocide
regulations require lower VOCs and toxicological safety
28 Ecolabel friendly
A novel acrylic binder proves to produce environmentally friendly
paints and maintain fresh indoor air quality
32 EU assessment
The European Commission’s biocides review could lead to bans
and restriction of preservatives and paints
Mergers & Acquisitions
36 Global review
Louis McCulloch updates his review of the company changes
during the past year
Protective Coatings
47 Fire protection
Faster project completion at minimal overall cost is achieved
using AkzoNobel’s latest intumescent passive fire protection
49 Long term protection
Micaceous iron oxide is proving to be a special pigment for both
decorative and protective coatings
Automotive Refinish
50 Digital age
The launch of Colorvation in the UK has brought accuracy and
reduced cycle times to bodyshops
Country Focus
53 UAE
Dubai is proving to be the best market in the UAE for the
coatings sector
Company Profile
56 Supply chain
DIA33 takes pride in its relationship with major global
speciality producers
MIDDLE EAST COATINGS SHOW 2017 DUBAI
C1 MECS - March 13-15, 2017
MECS 2017 Dubai willl be staged once again at the Dubai
international Convention & Exhibition Centre. A comprehensive
listing of exhibitors is published in both English and Arabic
COVER IMAGE CREDIT: www.croda.com
Regular Features
03 From the Editor
04 News
08 Diary
10 Letter from America
12 Business Matters
16 Powder Matters
58 Products
2 0 1 7 E V E N T S
+44 (0)1737 [email protected] www.coatingsgroup.com
FOR UP-TO-DATE INFORMATION ON ANY OF THE ABOVE EVENTS, PLEASE
CONTACT THE COATINGS GROUP
Global links for coatings professionals
DWTC, Dubai UAE 13 – 15 March 2017
CICC, Cairo, Egypt 11 – 12 October 2017
Balai Sidang Jakarta Convention Center, Indonesia 13 – 15 September 2017
InterContinental Hotel, Ho Chi Minh City, Vietnam 16 – 17 May 2017
Safari Park Hotel, Nairobi, Kenya 13 – 14 June 2017
SECTION REPORT
3 PPCJ • February 2017www.coatingsgroup.com
EDITORIAL COMMENT
Meeting of minds and expertise
Welcome to the first edition of
PPCJ in 2017. It did seem strange
not having to put together a
January issue, which usually caused me
a few sleepless nights, as I had to ‘burn
the midnight oil’, so to speak, to ensure
the catalouge for the Middle East Coatings
Show 2017 in Dubai was as complete
and accurate as possible. However, I did
manage to curb my disappointment and
enjoyed the holiday break immensely.
In this issue you will find the Catalogue
in both English and Arabic, plus a floorplan,
Product Finder, Business Presentations
schedule and an A-Z listing of the
companies taking part in this year’s event.
Up to date information can be found on the
Coatings Group website.
Again, we will be welcoming our regular
exhibitors, who come back to Dubai year-
on-year to discuss business opportunities
with visitors wishing to do business.
Companies, such as AGC Chemicals, Al
Shihab, Bühler, Comec, Cristal, de Vree,
Jana, MPC Prokim, Netzsch; Oliver y Batlle,
Omya, Reda Chemicals, Rhopoint, Saudi
Carbonate, Tasnee, Tinting Systems, Vibro-
Mac, Vinavil and X-Rite. Make sure you
work your way to the back of this issue and
note the companies you want to meet.
Middle East Coatings Show Dailies
Once again we will be publishing three
Show Dailies, one on each day of the
event, so if you have some news, product
releases or applications you would like
to share with visitors and exhibitors alike,
then please send copy and photographs
to me. Space will be limited within these
publications so don’t delay in getting
your information to me for additional free
promotional coverage.
Mergers and acquisitions
In this issue you will be able to see
immediately the changes that took place
last year with more company mergers and
acquisitions than previously reported. Even
this month as I write this column, more
announcements have been made with the
completion of acquisitions, such as Teknos
acquiring powder coatings business from
Sniezka in Poland; Evonik’s acquisition of Air
Products speciality additives business; Axalta
Coating Systems acquiring the business of
Ellis Paint Company; and RPM International
Inc announced that it has acquired Prime
Resins to be part of its USL Group. There are
more but I have run out of space!
East African Coatings Congress
We will be holding on June 13-14, this
year, the East African Coatings Congress once
again at the Safari Park Hotel, Nairobi.
The response to last year’s event was
phenomenal and the decision to hold it
again this year, was unanimous. In future it
will be held every two years.
The conference this year will cover
Innovative coatings solutions. We are seeking
speakers to present papers, so if your
company would like to take part in this
interesting and growing region, then
please contact me with an abstract of the
proposed topic. A Call for Papers will be
posted shortly, providing information on
submitting a paper for consideration. I look
forward to meeting old and new friends at
MECS and EACC this year.
EDITORIAL
Senior Editor: SUE TYLERTel: +44 (0)1737 855161Email: [email protected]
ADVERTISEMENT SALES
RANJEET SANDHUGermany/Switzerland/UKTel: +44 (0)1737 855105Email: [email protected]
FAN LANDERSAsia PacificTel: +44 (0)1737 855078Email: [email protected]
JESSICA SZUTS-NARANJOAmerica & Europe (ex Germany, Switzerland & UK)Tel: +44 (0)1737 855162Email: [email protected] or [email protected]
CHRIS HAMILTONMiddle East, Africa, Turkey & IndiaTel: +44 (0)1737 855109Email: [email protected]
Group Sales Director: KEZ CHENAgency/Agents & Corporate EnquiriesTel: +44 (0)1737 855107Email: [email protected]
ADVERTISEMENT PRODUCTION
Production Manager: MELANIE CHILESTel: +44 (0)1737 855044Email: [email protected]
MARKETING
Marketing Manager: KIERAN PROVERBSTel: +44 (0)1737 855067Email: [email protected]
CORPORATE
Vice President:IAN FAUXEmail: [email protected]
© dmg events (MEA) Ltd 2017
An official journal of the European Resin Manufacturers Association
PUBLISHED BY:
dmg events (MEA) Ltd, Quartz House,20 Clarendon Road, Redhill, Surrey RH1 1QX, UKTel: +44 (0)1737 855000Fax: +44 (0)1737 855034Website: www.coatingsgroup.com
ANNUAL SUBSCRIPTION:
UK £200.00/Outside UK £252.00Single copies: £28.00Polymers Paint Colour Journal is published 10 times a year
SUBSCRIPTIONS:
Tel: +44 (0)1737 855044Fax: +44 (0)1737 855034Email: [email protected];[email protected]: Subscriptions, dmg events (MEA) Ltd, Quartz House,20 Clarendon Road, Redhill, Surrey RH1 1QX, UK
Printed by:Pensord Press, Tram Road Pontllanfraith, BlackwoodGwent NP12 2YA, Wales
ISSN 1357-731XVol 207; Number 4628; February 2017
Founded 1879
Sue TylerSenior Editor, Coatings [email protected]
SECTION REPORT
4 PPCJ • February 2017www.coatingsgroup.com
NEWS
Solvay sells formulated resins business to AltanaThe speciality chemicals
group Altana has acquired the
Formulated Resins business of
Belgian chemical group Solvay.
The products are sold primarily
under the Conap brand name.
This business generated sales
of approximately US$20M in
2015. With the acquisition,
Altana takes over a research
and production facility from
Solvay with 53 employees in
Olean, New York. Within the
Altana Group, the business will
be integrated into Elantas PDG,
Inc, based in St Louis, Missouri
belonging to the Elantas
Electrical Insulation division.
“By acquiring the formulated
resins business of Solvay we
are strengthening our position
as a technology leader and
expanding our business in
North America”, CEO of Altana
AG, Martin Babilas, said.
Conap products are used
in electronics, electrical and
speciality adhesive applications.
“Formulated resins from Solvay
perfectly complement our
existing product portfolio”, said
Dr Guido Forstbach, Division
President of Elantas Electrical
Insulation. “It strengthens our
business in electronics and
we will be able to offer our
worldwide customers even
more innovative solutions in
the field of electrical insulation
and beyond.”
Evonik opens coatings
laboratory in TurkeyEvonik opened a new Coating
Additives laboratory at its Tuzla,
Istanbul site on January 31.
The state-of-the-art laboratory
will support customers with
the development of innovative
surface coatings in Turkey and
throughout the Middle East.
The application technology
laboratory features equipment
for processing customer
requests for a wide range
of coatings and printing ink
applications. This allows the
lab staff to effectively formulate,
apply and test coatings and
printing inks in water-based,
solvent-based or radiation-
curing formats. The modern
laboratory equipment also
includes a spray booth and a
climatic chamber.
“The new laboratory
strengthens our presence in the
region”, emphasised Gaetano
Blanda, Head of the Coating
Additives business line. “It
enhances our market proximity
and enables us to provide
our customers with technical
service and product solutions
for the development of new
formulations even faster.” From
its Tuzla site, Evonik Ticaret Ltd.
manages the distribution for
the Turkish domestic market
and exports to adjacent growth
markets with a staff of 50.
Evonik Ticaret will celebrate
its 30th anniversary in Turkey
in August 2017. The opening
of the new laboratory is just
another milestone of the Evonik
growth strategy for Turkey.
Evonik’s most important
products in Turkey include
monomers, amino acids,
cyanides, silicas and
superabsorbents. The Group
also holds 51% of shares in
Egesil Kimya Sanayi & Ticaret,
a JV based in Adapazari, near
Istanbul, for the production
of silica.
Evonik recently completed
the acquisition of the
Performance Materials
Division of Air Products, for
US$3.8bn (approx €3.5bn)
making the Group a leading
provider of additives for the
coatings industry.
Ferro completes
acquisition of
Capelle PigmentsFerro Corporation has
completed the previously
announced acquisition of
Belgium-based Cappelle
Pigments, a leader in speciality,
high-performance inorganic
and organic pigments, used
in coatings, inks and plastics,
for €50.5M (approximately
US$54M) on a cash-free and
debt-free basis. The acquisition
was previously announced on
October 17, 2016.
The transaction was
funded through excess cash
and borrowings under the
company’s existing revolving
credit facility.
Cappelle is a 125-year-old
premium pigment producer
and a market leader in
inorganic pigments. Cappelle’s
pigments complement Ferro’s
market leadership positions in
Complex Inorganic Coloured
Pigments (CICPs) and
Ultramarine Blue pigments.
Rufayah to build
plant in JubailSadara Chemical Company
and Rufayah Chemicals
Company (RCC), a Saudi-
downstream company, have
recently signed a long-term
partnership agreement.
Sadara will supply RCC
with Aromatics Concentrate
(Pygas) and Pyoil, generated
from cracking naphtha, to
be used by RCC in a new
US$500M hydrocarbon resin
complex planned for PlasChem
Park, a collaborative effort
between Sadara and the Royal
Commission for Jubail and
Yanbu. The supply agreements
will cover a period of 20 years.
NEWS IN BRIEFMichelman becomes early adopter of ISO 9001:2015Michelman has announced
its transition to the ISO
9001:2015 certification for
US operations. Michelman
was originally certified on
the ISO 9000 standard in
1995. The ISO 9001:2015
standard is based on
seven quality management
principles: customer focus;
leadership; engagement of
people; process approach;
improvement; evidence
based decisions; and
relationship management.
BASF completes Chemetall deal BASF has completed its
acquisition of Albemarle’s
global surface treatment
business, Chemetall.
Through this acquisition,
BASF’s Coatings division
expands its portfolio to
become a more complete
solutions provider.
Chemetall develops
and manufactures
customised technology
and system solutions for
surface treatment.
Reverdia and Xinfu sign Biosuccinium agreementReverdia has signed a
strategic partnership with
Hangzhou Xinfu Science &
Technology Co Ltd, which
represents a collaboration
to adopt Biosuccinium in
bio-based polymers and co-
polymers for the packaging
industry, as well as a long-
term supply agreement.
Sika acquires RmaxSika has agreed to acquire
Rmax Operating, LLC, a USA-
based market leader in the
production of polyiso insulation
products for complete building
envelope solutions (roofing and
wall systems). The deal brings
technology and know-how that
will accelerate Sika’s growth
and drive innovation in the
North American market via
the strong synergies between
the companies.
SECTION REPORT
5 PPCJ • February 2017www.coatingsgroup.com
NEWS
Avery Dennison Corporation
to acquire Hanita CoatingsAvery Dennison Corporation
has agreed to acquire Hanita
Coatings, a pressure-sensitive
materials manufacturer of
speciality films and laminates
from Kibbutz Hanita Coatings
and Tene Investment Funds
for the purchase price of
US$75M, subject to customary
adjustments. Headquartered
in Israel with sales and
distribution facilities in the USA,
Germany, China and Australia,
Hanita Coatings develops and
manufactures coated, laminated
and metallised polyester films
for a range of industrial and
commercial applications, all of
which require high performance
and superior quality. Hanita
Coatings’ window films are used
in architecture and automotive
after markets; its top-coated
polyester films are used in the
manufacture of durable labels;
and its ultra-high barrier films
form part of insulation systems
used in refrigeration, buildings
and cold chain packaging.
With 2015 sales of roughly
US$50M, the 33-year-old Hanita
Coatings currently employs
more than 220 employees,
most of whom are located at
the company’s headquarters in
Israel’s Western Galilee.
BCF launches DIY Safe Antifouling
Initiative at 2017 London Boat ShowThe British Coatings Federation
(BCF) along with the Royal
Yachting Association (RYA) and
British Marine, launched a new
DIY Safe Antifouling Initiative
at the London Boat Show on
January 8. The objective of
the initiative is to inform and
educate boat owners regarding
the hazards associated with
antifouling their boats.
In September 2015, the BCF
carried out an online survey
on DIY use of antifouling (AF)
paints in the UK. This was
completed by approx 2500
boat owners and showed that
more than 90% of users are
taking the correct precautions
and are well aware of the
hazards involved. However, it
also highlighted several areas
where improvements could be
made, with a need for better
guidance and how to minimise
the risk of skin contact with
AF paint.
Following on from this, a
16-page guidance document
has been published explaining
how to prepare the boat hull,
apply AF paints safely and
best practice for cleaning
up and waste disposal. A
poster is available for display
in chandlers, marinas and
boatyards and a tri-fold leaflet
has been prepared. These are
available for download at www.
safeantifouling.com.
PPG completes
Deutek takeoverPPG announced that it has
completed its acquisition from
the Emerging Europe Accession
Fund (EEAF) of Deutek SA,
one of the leading Romanian
paint and architectural coatings
manufacturers that reported
sales of €30M in 2015. Financial
terms were not disclosed.
Deutek manufactures and
markets a large portfolio of
professional and consumer
paints, including the Oskar and
Danke brands. Its products
are sold in more than 120
do-it-yourself stores and 3500
independent retail outlets
in Romania.
NEWS IN BRIEFAzelis extends distribution agreement with LonzaAzelis has announced
an extended distribution
agreement to offer Lonza’s
Materials Protection
ingredients to industrial
market segments, such
as paints, coatings, inks,
emulsion polymerisation,
adhesives and sealants
and marine paints. The
agreement covers Germany,
Switzerland, UK, Benelux,
Bulgaria, Slovenia, Croatia,
Serbia and Ukraine. Azelis
has already been serving
Lonza in France and Italy
for more than 10 years and
Turkey since 2015.
Gelest releases new edition of handbookGelest has released ‘METAL-
ORGANICS for Materials,
Polymers & Synthesis’,
which details more than
50 new compounds
and features 15 new or
expanded technical articles.
The 2016 edition includes
pieces on the use of metal
triflates in organic synthesis,
applications of zirconium
compounds in synthesis,
and synthetic applications of
organoaluminium compounds.
AkzoNobel launches global start-up challengeAkzoNobel is launching
Imagine Chemistry, an
opportunity to partner with
start-up firms, students,
research groups and career
scientists from across the
world to jointly exploit the
knowledge of chemistry
and solve several real-life
chemistry related challenges.
Launched in conjunction with
KPMG, Imagine Chemistry
focuses on finding solutions
within the following five areas:
Revolutionising plastics
recycling; Wastewater-free
chemical sites; Cellulose-
based alternatives to
synthetics; Bio-based and
biodegradable surfactants
and thickeners; and Bio-
based sources of ethylene.
Axalta acquires Ellis Paint CompanyAxalta Coating Systems has announced
its acquisition of the business of Ellis Paint
Company, a prominent manufacturer of
industrial and automotive refinish paint in North
America. Financial terms of the transaction were
not disclosed.
Founded in 1887, Ellis Paint Company is a
well-known manufacturer and distributor of a
strong portfolio of coating products suited for an
array of industrial applications and substrates,
including steel, concrete and wood, shipping
vessels and construction equipment and indoor
and outdoor furnishings and fittings. Ellis products
include the Hy-Lux line of multi-purpose coatings,
the Shaft-Lac line of solventborne coatings, the
Maximus line of low VOC industrial maintenance
coatings and the Engard line of heavy-duty
industrial coatings. The automotive segment of
Ellis, Pacific Coast Lacquer, developed Poly-
Primer, a legacy product, which was the original
solution to high VOC lacquer primer in the
vanguard of the evolution of low VOC coatings in
the automotive industry.
SECTION REPORT
6 PPCJ • February 2017www.coatingsgroup.com
NEWS
AkzoNobel helps to revitalise USA communityA group of young people in
the USA, who are working to
eradicate poverty and blight
in Pontiac, Michigan, have
joined forces with AkzoNobel’s
Human Cities initiative in order
to further revitalise the city and
help make people’s lives more
liveable and inspiring.
Established by a group of
high school students in 2014,
Leaders of the Future is a
growing organisation, which
has adopted a hands-on
approach to reinvigorating the
Pontiac area. Their work has
now been recognised through
a partnership with AkzoNobel,
which includes the award
of a US$100,000 Human
Cities grant.
The funding, which
underlines the company’s
global commitment to
improving, energising
and regenerating urban
communities across the
world, will be made available
over the next two years.
Half the amount will support
various sustainability-themed
community projects that
Leaders of the Future will
activate in Pontiac and half
will be used to establish a
higher education scholarship
fund, which will support the
educational ambitions of the
group’s membership.
“AkzoNobel can trace its
origins in Pontiac back to 1902
and, as a company that’s
proud of this heritage, we were
impressed by the sustainable
approach Leaders of the Future
has introduced to revitalise
the city”, said Johan Landfors,
President of AkzoNobel
North America.
IMCD takes ownership of distributor Feza KimyaIMCD, a leading distributor of speciality chemicals
and food ingredients, has announced that it has
acquired 100% of Feza Kimya iç ve Dıs Ticaret
Anonim Sirketi (Feza Kimya), based in Istanbul,
Turkey. With a focus on the coatings and plastics
markets, Feza Kimya perfectly complements the
existing IMCD Turkey operations.
Feza Kimya, founded in 1959 by Saffet Bozkurt,
is one of the leading market players in the technical
sales, marketing and distribution of speciality
chemicals and instruments in Turkey selling into
the coatings, plastics, rubber, lubricants and
detergents sectors. In 2015 Feza Kimya generated
revenue of €8M with 23 employees.
NEWS IN BRIEFFerro and Simon & Warner extend distribution dealFerro and Simon & Werner
GmbH have extended
their current distribution
partnership in Germany for
pigments used in coatings,
construction, plastics,
cosmetics and other
industrial markets.
In addition to the currently
supplied heat stable and
weather resistant Complex
Inorganic Color Pigments
(CICP) from Ferro, Simon
& Werner is now also the
exclusive distributor for a
broad range of inorganic
pigments resulting from the
acquisition of Nubiola by
Ferro on July 7, 2015.
Chemours announces TiO2
price increase The Chemours Company
has announced a price
increase on all Ti-Pure
titanium dioxide grades
sold in Latin America,
Europe, the Middle East
and Africa regions. Effective
February 1, 2017 or as
contracts and law allow,
a net price increase of
US$150/t will apply for all
Ti-Pure TiO2 grades sold
in Latin America, Middle
East, Eastern Europe and
Sub-Saharan Africa and
€175/t in Western and
Central Europe, Turkey and
North Africa.
NSF and RCMA create roof coating category ruleGlobal public health
organisation NSF
International, in co-operation
with the Roof Coatings
Manufacturers Association
(RCMA), has created the
first product category rule
(PCR) in North America
for roof coating materials.
PCRs enable product
environmental information
to be more transparent and
useful to the marketplace.
Products covered in this
PCR include fluid-applied
and adherent coatings.
Wacker builds
USA silica plant Wacker Chemie AG has
announced that it will build a
new production plant for its
HDK brand of pyrogenic silica
at its Charleston site in the US
state of Tennessee.
The facility, with capacity of
about 13,000t/yr, is anticipated
to involve capital expenditure of
some US$150M. Construction
work will start in Q2, 2017, with
completion planned for the first
half of 2019. This is expected to
create some 50 new jobs at the
Charleston site. Wacker already
produces hyperpure polysilicon
for the solar and semiconductor
sectors in Charleston. Ultrapure
amorphous silicon dioxide
powder is used as a filler in
silicone elastomers and as a
rheology-control additive in
paints, adhesives, unsaturated
polyester resins and plastisols.
Hexion plans to build European
technology centre in Germany Hexion has announced plans
to build a new European
technology centre in Kamp-
Lintfort, Germany. The new
facility will consolidate activities
from several research and
development facilities located in
nearby Duisburg.
The facility will be located
at the Dieprahm Technology
Park and includes an existing
1400m2 building housing
office and warehouse space,
adjacent to which will be built a
1600m2 new laboratory facility.
The facility will house
research and development
activities, including the
Transportation Research and
Application Center (TRAC),
which develops technology
solutions to enable growth of
composites for the automotive
industry. The Kamp-Lintfort
facility will also increase
Hexion’s process technology
research and improve
formulation development
capabilities for coatings,
civil engineering, aerospace
composites and electrical
casting applications.
This facility will complement
Hexion’s high-tech lab
dedicated to wind energy
applications in Esslingen,
Germany, which is housed
within a high-capacity speciality
epoxy resin blending facility.
Modifications to the existing
building and initial construction
on the new facility are expected
to begin immediately. The
company plans to complete the
project in mid-2018. The new
site at Dieprahm Technology
Park is approximately 15 miles
from the facility in Duisburg.
SECTION REPORT
7 PPCJ • February 2017www.coatingsgroup.com
NEWS
Axalta coats ‘Embracing Peace’ sculptures Axalta Coating Systems was
selected to coat multiple
‘Embracing Peace’ sculptures
from primer to finished product.
The sculptures were created
by American artist Seward
Johnson and are now owned
by The Seward Johnson Atelier
Inc, a New Jersey-based
non-profit foundation, which
promotes the appreciation of,
and education about, sculpture
and public art through the
creation, maintenance, sale and
public placement of Seward
Johnson’s sculptures.
Axalta products were chosen
exclusively to coat the sculptures
in Times Square. The structures
are painted with Axalta’s Corlar
824S, a two-component epoxy
primer that delivers excellent
durability and good corrosion
protection and Cromax Pro, a
low VOC waterborne basecoat.
For the topcoat, Axalta’s high-
performance Imron Industrial
MS600 high solid, low gloss
clearcoat was selected for its
high durability and long-term
protection capability.
‘Embracing Peace’
celebrates the famous sailor and
nurse photograph taken in 1945,
the moment the end of World
War II was announced. At 25ft-
tall, one of the bronze sculptures
stood for approximately a year at
the Memorial de Caen Museum
and War Memorial in Caen,
France, then was de-installed
and moved to the Bastogne War
Museum in Belgium.
Oxea increases prices Oxea has increased list and
off-list prices on the following
products effective January 1,
2017 or as contracts allow.
Neopentyl Glycol rose by
US$70/t (US$0.03/lb) and
Trimethylolpropane by US$110/t
(US$0.05/lb) in North America
and Latin America.
For EMEA, Propionic acid
rose by €50/t in Europe and
by US$55/t in other regions,
n-Butyric Acid and Isobutyric
Acid rose by €60/t in Europe
and by US$70/t in other
regions, 2-Ethylhexanoic Acid
by €90/t in Europe and by
US$100/t in other regions and
Isononanoic Acid by €100/t
in Europe and by US$110/t in
other regions. n-Valeric Acid,
n-Heptanoic Acid, Pelargonic
Acid rose by €100/t in Europe
and by US$110 in other regions.
Finally, n-Propyl Acetate,
n-Propanol, n/i-Butanol and
n/i-Butyl Acetate all rose by
US$0.05/lb in North America
and Mexico and by US$110/t in
South America.
AkzoNobel share repurchaseAkzoNobel has repurchased
137,000 of its own ordinary
shares in the period from
January 9, 2017 up to and
including January 13, 2017, at
an average price of €59.48/
share. The consideration of
the repurchase was €8.14M.
This is part of a repurchase
programme announced on
December 12, 2016. The total
number of shares repurchased
under this programme to date
is 315,000 ordinary shares for a
total consideration of €18.81M.
The purpose of the programme
is to neutralise the dilutive effect
of stock dividends paid in 2016.
Covestro lifts
force majeureCovestro has lifted the force
majeure on the polyurethane
raw materials MDI and TDI
in Europe that it declared
on October 6, 2016. A raw
material supplier, which had
experienced an outage had
lifted its own force majeure
and began to supply Covestro
with nitric acid once again.
Covestro, therefore, was able
to resume full deliveries of MDI,
TDI and by-products.
During the force majeure
period, Covestro made
considerable efforts to
compensate for the missing
raw materials by making
alternative purchases from
other suppliers. Covestro does
not expect the force majeure
situation in Europe to have
any negative effects on the
company’s declared business
targets for 2016.
NEWS IN BRIEFPCI Group completes acquisition of Henkel’s Thomsit and Cersit brandsWith effect from January
1, 2017, the professional
Western European Building
Material Business sold
under the Thomsit and
Ceresit brands for flooring
and tiling systems and
waterproofing have become
part of the portfolio of
the PCI Group, a wholly-
owned subsidiary of
BASF. The management
team welcomed the new
colleagues to the German
facilities in Düsseldorf
and Unna, as well as
the plant in Oosterhout,
The Netherlands.
Archroma receives Eco award from WWF PakistanArchroma has received the
Award for Eco-innovation
from WWF Pakistan at
the organisation’s Annual
Green Office Network
Meeting in Karachi. The
award is a recognition of
Archroma’s continuous
efforts to foster sustainable
innovations aimed at
preserving dwindling
ground water reserves and
developing eco-efficient
processes that reduce
energy, process time and
resource consumption.
Chemtura expands deal with Azelis AmericasChemtura Corporation
has announced that
Azelis Americas will be
the sole distributor for its
Great Lakes Solutions
flame retardant products
in the USA and Canada.
This will encompass the
complete brominated
and phosphorus flame
retardant product
portfolios in combination
with antimony and
synergists and became
effective on February 1.
Chemtura discontinued its
flame retardant business
relationship with Chempoint
and Nexeo on January 31.
BASF celebrates 25 years of PaliocromBASF is celebrating 25 years
of providing Paliocrom to the
automotive and industrial
coatings markets, most
recently with a customer event
in its Ludwigshafen, Germany
headquarters. Paliocrom – now
sold under the Colors & Effects
brand – was first introduced
in 1991 as a high chroma
aluminium effect pigment with
exceptional hiding power.
The first Paliocrom product,
Gold L 2000, was presented
to customers in 1991. This
innovative offering provided a
thin aluminium flake covered by
iron oxide in a form that could
meet the requirements of the
automotive coatings industry.
Since 2015, the group has
expanded capacity for the
production of Paliocrom effect
pigments by more than 20% in
Ludwigshafen. Most recently,
the group introduced Paliocrom
sparkling Red L3505.
SECTION REPORT
8 PPCJ • February 2017www.coatingsgroup.com
DIARY | NEWS
DIARYFebruary 28-March 2, 2017
Interlakokraska 2017
Expocentre Fairgrounds
Moscow, Russia
www.interlak-expo.ru
March 13-15, 2017
Middle East Coatings
Show 2017
DWTC, Dubai, UAE
www.coatingsgroup.com
March 26-30, 2017
Corrosion 2017
Ernest N Morial Convention
Center, New Orleans, LA, USA
www.nace.org
March 27-31, 2017
Powder Coating 2017
JW Marriott, Indianapolis, IN, USA
www.powdercoating.org
April 4-6, 2017
European Coatings Show 2017
Exhibition Centre Nuremberg
Germany
www.european-coatings-show.com
May 16-17, 2017
Asia Coatings Congress
InterContinental Asiana Saigon
Ho Chi Minh City, Vietnam
www.coatingsgroup.com
June 13-14, 2017
East African Coatings
Congress 2017
Safari Park Hotel, Nairobi, Kenya
www.coatingsgroup.com
September 13-15, 2017
Asia Pacific Coatings Show
Balai Sidang Jakarta Convention
Center, Indonesia
www.coatingsgroup.com
October 3-5, 2017
ABRAFATI 2017
São Paulo Expo, Brazil
www.abrafati2017.com.br
October 11-12, 2017
Middle East Coatings Show
CICC, Cairo, Egypt
www.coatingsgroup.com
October 17-19, 2017
RadTech Europe 17
Prague, Czech Republic
www.radtech2017.com
EU round up: MEPs call for food exposure rules for coatings The European Parliament has called for the
creation of European Union (EU)-wide safety rules
limiting the exposure of food products to varnishes,
coatings, inks and adhesives used in packaging,
labelling and tableware. In a resolution, which is
not binding on the European Commission, the
parliament noted that no EU-wide standards on
food consumer exposure to these chemicals
yet exist, while rules are in place for plastics and
ceramics. “This is how we ensure that the materials
that are in direct contact with our food are safe.
The current regulation allows for arrangements
concerning 17 substances but only four of these,
at the moment, are harmonised at EU level. The
rest are up to the [EU] member states to work out”,
said Danish Socialist MEP Christel Schaldemose,
who co-ordinated the resolution vote. “The lack of
harmonised rules causes problems for consumers,
for companies and for the authorities…some
countries have high standards, other low
standards. We know from various studies that it
is what is in the packaging that is causing health
problems”, she said.
• Meanwhile, the European Chemicals Agency
(ECHA) and the European Food Safety Authority
(EFSA) have started work on developing scientific
guidance to enable endocrine disruptors to be
identified. This follows the release in June by the
European Commission of science-based criteria
for identifying endocrine disruptors. These criteria
are expected to enter into force in 2017 but will
need to be fleshed out with guidance – now
being developed by EFSA and ECHA, plus the
Commission’s Joint Research Centre. A draft will
be released January-June for public consultation.
• Proposals to amend the calculation systems
for assessing whether the European Union (EU)
imposes anti-dumping duties or countervailing
duties on cut-priced paint and coatings
imports will help the EU target countries most
commonly exporting such goods, according to
the European Commission.
The changes will allow the Commission more
scope to take subsidies and government controls
into account when deciding if an import is being
sold at below cost price and, hence, could be
subject to EU anti-dumping duties.
These proposals would amend EU regulations
(EU) 2016/1036 and 2016/1037 on anti-dumping
and countervailing duties.
EU trade Commissioner, Cecilia Malmström
said: “The proposals will ensure that the EU’s
trade defence instruments are adapted to face
new challenges”.
See http://trade.ec.europa.eu/doclib/
docs/2016/november/tradoc_155079.pdf
• ECHA has added a new coatings chemical to its
candidate list for ‘authorisation’ status under the EU
REACH chemical control system. This is tetralead
trioxide sulphate, deemed by the EU agency to
be toxic for reproduction – used to make coatings
and inks for mirror backings. The European
Commission will now decide if the chemical
received this status, forcing manufacturers to
obtain special permission for its use.
• Paints and coatings companies and their
suppliers registering their chemicals with ECHA
will, henceforth, have to demonstrate that they
have tried to use non-animal methods to test
for skin sensitisation created by their products
and ingredients. From October 11, companies
can only use animal tests to compile ECHA
registration dossiers where they can demonstrate
that ‘in vitro’ assessments did not work.
People
Vertellus appointsVertellus has appointed Kurt
Severyns as Director of Sales,
Europe. Severyns will lead sales
operations for Vertellus Specialty
Materials in Europe, the Middle
East and Africa, expanding
efforts with biomaterials
customers and leading market
development strategies for key
products in the company’s
Fine Chemicals, Performance
Materials and Plastics offerings.
John Fletcher joins ASTM international boardJohn Fletcher, Technical
Support Manager for
Elcometer Limited in
Manchester, UK, will serve
a three-year term on the
ASTM International board
of directors. Fletcher is
based in Manchester but
represents Elcometer Inc at
ASTM meetings. A member
of ASTM International since
2007, Fletcher is currently
serving as Vice Chairman of
the Committee on Paint and
Related Coatings, Materials
and Applications.
Petruch made EO of DICMyron Petruch, President of
Sun Chemical’s Performance
Pigments division, has been
named an Executive Officer
of DIC Corporation, Sun
Chemical’s parent company
based in Tokyo, Japan.
Petruch, who is only the
second Western-based EO at
DIC, has been given additional
operational and strategic
responsibilities within DIC’s
Global Pigments organisation.
www.heubachcolor.com
Visit us . European Coat ings Show 2017Booth 7A-324
We create your fascinating colors.HEUBACH`s recent additions to the High Performance Pigments for the paint and coatings industry: > MONOLITE™ Yellow 115101 > MONOLITE™ Red 301901 Pigment Yellow 151 Pigment Violet 19 > MONOLITE™ Yellow 115401 > MONOLITE™ Red 312202 Pigment Yellow 154 Pigment Red 122 The excellent light- and weather fastness combined with its high tinting strength allows the use in high end industrial and automotive applications.
10 PPCJ • February 2017www.coatingsgroup.com
LETTER FROM AMERICA
The use of biocides in paints and
coatings is increasing around the
globe, including in North America.
While part of this growth is attributed to
expansion of the construction sector in
both developing and mature markets, the
switch from solvent-based to waterborne
coatings is perhaps the most important
driver. Future demand in North America
for biocides used in paints and coatings
will also be strongly impacted by changing
regulatory landscapes in the USA
and Europe.
The overall global market for biocides
is expected to reach US$12.01bn by 2022,
according to Global Market Insights, Inc
(GMI). North America accounted for the
largest regional share in 2014 with a market
value of US$3.2bn, which is predicted by
GMI to increase to US$3.7bn by 2023.
Paints and coatings (as well as sealants
and adhesives) are a major end-use
application for biocides, in addition to water
treatment, healthcare, cosmetics, and wood
preservation, among others.
INCREASE IN BIOCIDE REQUIREMENTS
Growth of the market for biocides used
in paints and coatings in North America
appears to be slightly outpacing the overall
coatings industry, according to Michael
D Brown, President of StrategyMark, Inc,
with absolute growth in the range of 2-3%/
yr. “This growth is coming not only from
end-use growth, which is driven by the
continued expansion of the housing and
construction markets in North America but
also from increasing use of waterborne
coatings, which require greater protection
from microbial growth during in-can
storage”, he says. There is also growing
use of biocides as hygiene aids in coatings
and as alternatives to more conventional
but less environmentally friendly additives,
based on chlorine and formaldehyde,
according to market research firm
Biocide Information.
One new coating product in North
America that is attracting attention is
Sherwin Williams’ Paint Shield, the first EPA-
registered paint that kills more than 99.9%
of bacteria after two hours of exposure
on a painted surface. Lonza, meanwhile,
launched Proxel LS Preservative in the EU,
Asia and the USA. Proxel LS Preservative,
according to Craig Waldron, Global Market
Manager for Building Products with
Lonza, is a blend of zinc pyrithione and
benzisothiazoline offering antimicrobial
protection against bacteria and fungi in
water-based coating systems.
SMART TECHNOLOGY
There are several other technology trends
in the North American coatings industry
that may also have an impact on the
use of biocides in addition to the overall
movement towards greener products
and ingredients, including a continued
lowering of acceptable levels of volatile
organic compounds (VOCs) in formulated
paints and coatings, according
to Waldron.
He notes that the development of smart
coatings that can sense and respond
to stimuli in the environment, such as
pressure, light, heat, etc and react in
a predictable manner − potentially in a
reversible fashion − requires biocidal
products that protect these materials in
the can and the applied film but without
impacting coating functionality.
Other newer coatings of interest
include thermally conductive materials and
durable ultra-hydrophobic systems that
are not abraded away or damaged by UV
exposure. Labour-saving coatings, such as
paint-and-primer-in-one products and high
hiding/opacity formulations, with reduced
drying times are also challenging the design
and performance of biocidal additives.
SENSITIVITY ISSUE
Not least in importance, according
to Waldron, is the growing interest in
sensitiser- and allergen-free coatings, which
is impacting the choice of biocides for use
in paints and coatings that may experience
frequent human contact. Regulations in the
EU are, in particular, impacting paint and
coatings manufacturers in North America
that sell into the European market. Notably,
according to Waldron, as part of the EU’s
Classification, Labelling and Packaging
(CLP) hazard communication regulation,
a new ‘allergen’ label phrase (EU H208)
was launched.
This phrase indicates that a chemical
mixture, including formulated products,
such as coatings, may cause sensitisation
via skin contact. “The trigger concentration
for the EU H208 phrase was deliberately set
lower than previous hazard communication
thresholds in order to protect the percentage
of the European population that is already
sensitised to a substance.
“This lower trigger concentration for
sensitiser hazard communication is causing
a major shift in biocide use patterns in the
EU, particularly for paints containing the
preservative CMIT (5-chloro-2-methyl-
3-isothiazolone). More recently, MIT
(2-methyl-3-isothiazolone) preservative
systems have been coming under
pressure as well. MIT is a commonly used
preservative that has been linked to skin
sensitisation from its use in cosmetics and
paints. As a result, products containing
MIT are under pressure to be reformulated
using non-MIT ingredients“, he explains.
He adds that Lonza’s Coatings and
Composites business has specifically
focused on the development of biocides
and biocide blends for paints and
Cynthia Challener looks at how North America is meeting the demand for
biocides used in waterborne paints and coatings rather than solvent-based together
with the strong impact of the changing regulations in the USA and Europe
Switch to waterborne
coatings driving
biocide demand
11 PPCJ • February 2017www.coatingsgroup.com
LETTER FROM AMERICA
coatings that meet the stricter regulatory
requirements now in place in many regions
around the world.
In addition to sensitisation, there are
other issues with biocide use that are of
concern for Brown. “I remain somewhat
dubious about the potential for anti-microbial
products, at least near-term”, he asserts.
“There seems to be some backlash against
certain active ingredients, such as triclosan
and compounding the problem is the fact
that some additives, particularly silver
ions, have not lived up to their potential”,
he observes.
PPCJ
Author: Cynthia A Challener, PhD, Principal Consultant, C & M Consulting,1325 Center Road, Montpelier, VT 05602, USA Tel: +1 802 613 3139 Email: [email protected]
Paint Shield, the first EPA-registered
microbicidal paint that kills greater than
99.9% of Staph (Staphylococcus aureus),
MRSA (Methicillin-resistant Staphylococcus
aureus), E. coli (Escherichia coli), VRE
(Vancomycin-resistant Enterococcus
faecalis) and Enterobacter aerogenes on
painted surfaces, offers customers an
important new tool to help prevent the
spread of these harmful bacteria on the
painted surface.
Paint Shield doesn’t just inhibit the
growth of common microbes, it actually
has the power to kill these bacteria within
two hours of exposure and continues to
kill 90% of bacteria even after repeated
contamination, for up to four years when the integrity of the surface is maintained.
“Paint Shield is a game-changer in the coatings industry and represents a major
breakthrough in technology”, said Steve Revnew, Senior Vice President of Product
Innovation, Sherwin-Williams. “Importantly, it not only helps prevent the spread of these
harmful bacteria on the painted surface but it also features all the appearance and
qualities our customers seek and expect from Sherwin-Williams.”
Featuring quality coating performance, great hide and durability, Paint Shield is
available in 550 colours and comes in the popular egg-shell finish. Paint Shield can be
applied on interior hard, non-porous ceilings, walls, doors and trim. It is ideal for a variety
of settings from healthcare, education and hospitality to residential housing and more.
SECTION REPORTBUSINESS MATTERS
12 PPCJ • February 2017www.coatingsgroup.com
Powder is a domain of the coatings
sector, which I only rarely cover in this
column, largely because of the history
of Sid Harris’ contributions to PPCJ and
now the Joe Powder correspondent offers
a similar viewpoint. However, recently I ran
across an interesting report, which looks
into the powder coating equipment sector,
thereby, throwing light not only on matters
such as ovens, booths and guns but also
the potentials of the powder coating sector
itself and its various end use markets.
POWDER POTENTIAL
Powder Coatings Equipment Market
Analysis By Product…, By Application…, By
Region… And Segment Forecasts, 2013 –
2024 finds that the global powder coatings
equipment market was worth US$1.14bn
in 2015 and is expected to witness
growth over the next eight years due to
the growing automotive and construction
industries in China, India, Mexico, South
Korea and Singapore. Some of the major
trends and key figures are outlined below.
� In general, powder coatings equipment
should experience significant demand
as powder coatings offer high transfer
efficiency, enhanced reliability, ease of use
and provide high efficiency. Increasing
usage in various applications including
home appliances, automotive, architecture
and furniture, will increase industry
expansion over the upcoming years. Rising
urbanisation and income levels underpin
these expected demand trends.
� Manufacturers are continuously investing
in research for the development of
lightweight, compact, flexible and easy-to-
clean powder coating spray equipment to
address issues, such as space constraints
and flexibility of coating complex shapes.
The inception of thermal powder spray
equipment is expected to create new
opportunities over the forecast period.
� Companies are also focusing on new
product development to increase their
presence globally. Nordson has developed
Encore HD automatic dense-phase powder
coating guns that provide consistent
performance, excellent transfer efficiency
and high coating deposition rates for
efficient powder application, which will fuel
the industry growth over the coming years.
� Ovens and booths are expected to show
significant growth at a CAGR of 7% from
2016-2024 on account of advantages, such
as superior curing and minimised blow
off. Ovens ensure proper baking of the
coatings, creating a smooth fused layer on
surfaces, which in turn, will propel growth.
� Powder coat guns are used for spraying
coatings on metal, ceramic, glass and
plastic objects and surfaces. Rising
demand for furniture and architectural
applications, such as windows are
expected to fuel the demand for equipment
in the near future.
� The powder coating equipment sector is
highly fragmented in nature on account of
the presence of numerous manufacturers
on a global, as well as regional level.
Nordson Corporation, Carlisle, Wagner
and Hangzhou Color Powder Coating
Equipment Co are among some of the key
industry players.
� As is often the case with the powder
coatings market, the major sectors are fairly
evenly spread with market shares around
20 +/- 2%, with architectural being the
smallest of the major end-uses, followed by
a variety of other applications (see chart).
� North America accounted for US$235M
of the market in 2015 and is expected to
witness steady growth on account of new
product launches by GM, Cadillac and Ford
Motors along with automotive production
growth in the USA. Capacity addition and
plant expansion by automotive companies
in the USA will augment the demand over
the forecast period.
MANUFACTURING MATURITY
Inevitably almost all market research
reports converge to proffer the same
collection of industry drivers – legislation,
the moves to waterborne/water-based
or other compliant technologies and
increasingly sustainability, where this can
be effected. Then there are the foregone
geographical conclusions – the pre-
eminence of China and India and the
continued rise of Africa and Central and
South America. But not all reports are
necessarily focused on global growth
markets. After something of a break
from covering paints and coatings, the
Freedonia Group has now published a
new study for the USA manufacturing
(OEM) coatings sector. The timing of this
is interesting because in 2016 there were
many acquisitions on the part of industrial
coatings companies, such as AkzoNobel,
PPG, RPM and Axalta Coating Systems,
which have included the USA either directly
or indirectly. This is considered a reflection
of companies searching for new markets
often in specialised areas at a time of
market maturity.
Terry Knowles, this month, looks at the powder coatings equipment
market, which is expected to grow over the next eight years
Contrasting aspects of industrial finishing
Global powder coating equipment market by
application 2015 (%)
Source: Grand View Research
Have a chat with us
ECS 2017, Nuremberg, Germany,
April 4 – 6, hall 4A, booth #314b
Water, wind and waves – the rough, irrepressible power of the sea is a real challenge for any surface protection. Whether it‘s a ship or drilling rig, steel or concrete, BYK Additives for Protective and Marine Coatings prove how powerful they are under extreme conditions. They simplify the application of coatings, enable the coating layers to be reduced, provide long-lasting corrosion protection, and reduce maintenance intervals. Positive effects to be proud of both economically and ecologically!
www.byk.com
BYK Additives Sea the protection
SECTION REPORT
14 PPCJ • February 2017www.coatingsgroup.com
BUSINESS MATTERS
This Freedonia industry study analyses
the current US$8.8bn manufacturing (OEM)
coatings industry, predicting that it will grow
by 1.4%/yr up to 379M US gallons by 2020,
by which time the market is expected to be
valued at US$10.5bn. Gains will be spurred
by advances in building construction
activity and the production of durable
goods, such as furniture, machinery and
appliances. Additionally, healthy growth in
non-residential fixed investment spending
will bolster demand for coatings used in
the fabricated metal products and metal
building components markets. However, a
less than stellar motor vehicle production
outlook, industry maturity and more
efficient coating processes, will rein in
some potential demand growth in the
national market. PPCJ
Author: Terry Knowles, Freelance Writer [email protected]
Powder Coatings Equipment Market Analysis By Product
(Ovens & Booths, Powder Coat Guns), By Application
(Consumer Goods, Architectural, Automotive, General
Industries, Furniture), By Region And Segment Forecasts,
2013 – 2024, was published in November 2016 by Grand
View Research. A single user licence costs US$4950. For
more information, email [email protected].
Manufacturing (OEM) Coatings Market in the US, by Market,
Formulation and Substrate, published by the Freedonia
Group is now available. An individual licence for this report
costs US$4900. For more information on this title, email
Oliver + Batlle presents its versatile Mill-
ennium RS basket mill at MECS 2017 Dubai
At the Middle East Coating Show 2017, Oliver +
Batlle will exhibit its renewed basket mill for
superior batch flexibility in manufacturing
processes of paint, coatings, inks
and adhesives.
As every year, Oliver+Batlle cannot miss
the Middle East Coatings Shows in Dubai, UAE,
the largest coatings event for the Middle
East and Gulf Region. At this year’s event,
Oliver + Batlle will exhibit the Mill-ennium
RS basket mill on Stand B15. Manufacturing
process automation and versatility with a
fresh and modern design.
Mill-ennium RS has a great batch
flexibility and efficiency. Options include a
vertical helicoidal scraper for vessel side-
wall and bottom scraping, combined with
efficient product mixing, which allows the
Mill-ennium RS to process from low to very
high viscosities up to 6000P.
In addition, the basket mill is equipped
with the control software, Obmatic Mill,
specially developed in-house to provide
the right level of automation to meet the
individual needs of the customer in his
manufacturing process.
Mill-ennium RS can be equipped with
three different control systems:
• Version S: An essential control panel
with pushbuttons for the manual
operation of the mill.
• Version A: A touch screen with Obmatic
Mill control system, which allows the
operator to manage, either manually
or automatically, the manufacturing
process by setting time or kW set-
points. It allows the mill set-up and the
supervision of the operation and aids
maintenance planning. This software
version reduces downtime by allowing
the machine to perform the process
in an autonomous manner. Any
irregular situation is detected by the
alarm system.
• Version CP: All the advantages of the
version A plus the ability to create, store
and launch manufacturing recipes. This
provides the mill with the highest level of
automation. Optimised and repeatable
processes are always achieved without
the need to rely on the operator’s
experience in grinding the product.
From March 13 to 15, 2017, Mill-ennium
RS basket mill will be exhibited at the Middle
East Coatings Show in Dubai, UAE, at the
Oliver+Batlle Stand B15.
Manufacturing process automation and
versatility with a fresh and modern design
16 PPCJ • February 2017www.coatingsgroup.com
POWDER MATTERS
Dear Joe, My customers get surface problems, such as gloss reduction and haze (regional) curing with the
gas oven. But there is no problem with the TGIC system, just for Primid (HAA). What do you think? Should I use a gas oven stabiliser? Ozlem Ekinci, Turkey
A. Hi Ozlem, Primid powders emit water
as a volatile during cure in the oven. This
can account for the haze in the oven air. If
the oven has poor circulation and/or poor
exhaust this could cause gloss variations.
If the combustion of gas in the oven is poor
(incomplete) this will cause gloss variations
on the Primid powder surface. TGIC
polyesters are less sensitive to this type of
problem, as they do not emit a volatile of
cure in the oven. Kind regards, Joe
Dear Joe, What makes one powder fluidise better than another?Jason Smith, Denver, Pennsylvania
A. Hi Jason, This is an excellent question.
To make a powder coating perform well
many physical and chemical properties
need to be aligned properly. Fluidisation
performance is one of the critical physical
properties needed to successfully apply
a powder coating. For you newbies,
fluidisation involves incorporating a volume
of air into a quantity of powder to prepare
it to be transported from the feed hopper
to the application gun. This mixture of air
and particles not only helps in transporting
the material but also enhances the delivery
of electrostatic charge to the individual
particles as they exit the spray gun.
Particle size distribution (PSD) is the
primary factor that influences fluidisation.
Powder coatings comprised a range of
different sized particles from about 1.0μm
upwards to around 90μm. The best
fluidisation occurs with the heart of this
range typically 20-60μm. Fines (<10μm)
tend to agglomerate and impair fluidisation.
Coarse particles (>90μm) are difficult to
fluidise because of their mass. Hence the
best fluidising powder coatings possess
tight particle size distributions. This
means a minimal level of fines and also a
minimum of coarse particles. If you employ
a reclaim system to capture and recycle
oversprayed powder this can be a factor
in fluidisation. The best suited particles are
preferentially deposited on the parts you
coat. And as you can surmise, the fines and
coarse particles populate the overspray.
Reintroducing overspray into your virgin
powder feed will affect fluidisation. This
increasing in the level of fines and coarse
may require adjustments to your fluidisation
process. The best strategy is to use high
quality powder coating from a reputable
powder manufacturer. The best suppliers
have well-controlled grinding processes
that yield relatively narrow PSDs. Narrow
PSDs deliver high first pass transfer
efficiency and, hence, less overspray to
contend with.
A secondary factor that contributes to
poor fluidisation is moisture. ‘Wet’ powder
will be very difficult to fluidise and transport
through a powder application system. High
levels of moisture are usually due to poor
storage and handling of powder coating
inventory. Powder should be stored in an air
conditioned environment and open bags/
containers are to be avoided. In addition you
should be careful to avoid introducing ‘cool’
powder into a warmer, moister environment.
The cool powder will act as a desiccant
and absorb the ambient moisture. It is wise
as you move powder from storage to the
application area to allow it to acclimatise to
the ambient application environment before
opening the package. Best regards, Joe
Dear Joe, I’m working on a marketing research project and have a question regarding powder coatings used on MDF. Do they always have to be UV-cured? Regards, Pamela , Senior Industry Analyst
A. Dear Pamela, No they do not. There
are essentially two options: UV curable and
low temperature thermosetting powder
coatings. The UV curable type requires
an additional process step but cure in
a shorter process footprint. They also
provide better coating durability (mainly
hardness and chemical resistance). UV
cure requires line-of-sight curing that also
is critical to the distance of the lamps
to the coating surface. In addition, film
thickness must be carefully controlled. If
the coating is too thick (or too opaque) it
will not cure completely. And, as you can
guess, the material cost is higher than more
conventional products.
Thermosetting powders can be used
as well. They require longer curing times
(typically 10-15min), although infrared
heat can mitigate some of this. They are
highly catalysed and, therefore, must be
stored in a controlled environment and
can advance chemically, which affects
coating smoothness. The thermosets are
generally less smooth than the UV curable
types and typically less durable. As for
specifics regarding cure requirements,
this mainly depends upon the chemistry.
Polyester TGIC systems work with cure
cycles of about 25min at 135°C. Acrylics
can cure as low as 25min at 130°C.
Epoxies have been formulated to cure at
25min at 120°C. Epoxy-polyesters (hybrids)
can be processed at 25min at 125°C.
Polyurethanes and Polyester-HAA require
cure temperatures more than 150°C. More
conventional powders cure with less dwell
time at much higher temperatures and,
therefore, cannot be used for MDF.
UV curable powder technology requires
a melt stage, typically around 60-90sec
at a peak temperature of 100-120°C. The
additional UV cure process usually takes
only a few seconds depending upon
the complexity of the part. Lots of film
performance and process issues are very
specific to the formulation so you need
to be careful with generalisations. Best
regards, Joe. PPCJ
PPCJ columnist, Joe Powder, provides answers to readers
questions on aspects of the powder coating process
Ask Joe Powder
Please send your questions and comments to:[email protected]
Letters to and responses from Joe Powder have been edited for space and style – Ed
PIGMENTS & DISPERSIONS FOR COATINGS
Strength through Experience
www.unioncolours.com
BIOCIDES
18 PPCJ • February 2017www.coatingsgroup.com
The need for an effective biocide
to provide in-can protection for
water containing products is well
understood by all producers. The mixture
of 5-chloro-2-methyl-2H-isothiazol-3-one
(CIT) and 2-methyl-2H-isothiazol-3-one
(MIT) was the mainstay biocide in use until
the adoption of the 28th Adaptation to
Technical Progress (ATP) of the Dangerous
Substances Directive (DSD) in 2001
declared the mixture was sensitising at
≥15ppm.1 This change required the labelling
of products containing ≥15ppm with the
R43 Risk phrase and Xi pictogram.
The mixture of 2-methyl-2H-isothiazol-
3-one (MIT) and 1,2-benzisothiazolin-3-
one (BIT) was developed and released
around 1998 and with the changed
labelling requirements for CIT/MIT quickly
became established as a key in-can
biocide. Synergy between the MIT and
BIT overcame efficacy gaps exhibited
by MIT against fungi and BIT against
Pseudomonads when used alone. The
mixture of MIT and BIT exhibited excellent
efficacy against both bacteria and fungi and
the minimum inhibitory concentration (MIC)
values are shown in figure 1.
Initial criticism of the slower kill rates
of MIT/BIT compared to CIT/MIT and,
therefore, questions of the robustness
of the mixture were overcome by the
results obtained in laboratory studies
and, more importantly, when using the
mixture in production. In a number of
cases intermittent contamination concerns
in production plants were solved by
the adoption of MIT/BIT. The first MIT/
BIT biocide released, ACTICIDE® MBS,
was manufactured as a clear aqueous
solution of MIT and BIT and the production
required the use of highly pure MIT and
BIT to provide good physical and chemical
stability. The production of blends of MIT
and BIT as solvent-based solutions or
aqueous dispersions can be made with
lower purity actives increasing the potential
for involvement in the formation of ghost
odour in the dry paint film and also reduced
stability of the biocidal actives, with some
products being prone to settling requiring
continual agitation. Blends of MIT/BIT have
been produced by many suppliers with
varying stabilities of the active substances.
Table 1 shows photographs of a variety
of these after storage at 65°C, along
with analytical data presented in Table 2. Samples of ACTICIDE MBS 5050 are
labelled as MBS, while the letters for the
other samples refer to the data in Table 2. The photographs and analytical data
show the clear lack of stability for some
products but of particular interest is the
significant loss of MIT from some samples,
in excess of the amount of BIT lost, as MIT
is generally regarded as the most stable of
the isothiazolinones.
The quality of the MIT used is paramount
to being able to produce good quality
stable blends of MIT/BIT and has a major
impact on the efficacy of the biocide in the
finished product.
As with all in-can biocides, the
concentration required to provide
good protection is dependent on the
specific formulation, redox carryover
from the polymer and, very importantly,
the hygiene of the production factory.
Effective biocides for in-can protection is a pre-requisite to avoid fungi and bacteria
ingress as Kevin Roden, Thor Specialities, discusses
Developments in in-can biocides
Fig 1. MIC values for
MIT, BIT and MIT/BIT
Table 1. Pictures of biocide samples after storage at 65°C
Samples
Initial samples before storage
Storage at 65°C for three days
Storage at 65°C for seven days
A B C D MBS E F MBS
Innovations for a better world.
Cenomic™. Unbeatable price- performance ratio.
Visit us at Middle East Coatings Show
March 13–15, 2017 Dubai World Trade Center, Booth L07
BIOCIDES
20 PPCJ • February 2017www.coatingsgroup.com
ACTICIDE MBS is used alone by many
producers but some with a history of
hygiene concerns have used a variety
of blends of MIT/BIT with other biocidal
active substances. Mixtures containing
bronopol have proven successful to
provide additional efficacy against micro-
organisms with tolerance developed over
many generations where factory hygiene
has been compromised. Bronopol is very
active against tolerant bacterial species
but as bronopol releases a small amount
of formaldehyde as it degrades, its use is
not applicable to producers who wish to be
formaldehyde free.
MIT/BIT may also be used in
combination with CIT/MIT to provide a
biocide package where the content of
CIT/MIT is below the labelling threshold
described above but may be able to
provide a fast kill to help deal with
contaminated water and raw materials or
specific factory isolates. Additions of levels
<15ppm will generally only have short term
effects as the CIT in particular is degraded
to below effective levels. The MIT/BIT
provides the long term in-can protection.
The ACTICIDE CBM family consists of a
number of products with different ratios
of CIT, MIT and BIT to ensure the desired
concentration of biocide actives is added
to provide good long term protection
depending on the stability of each biocide
active. Stability studies need to be
conducted if this biocide combination is to
be used to ensure that each biocidal active
has the correct stability to perform the
required functions.
Some products require additional
fungal protection due to the content of raw
materials likely to contain high numbers
of fungal spores or with characteristics
that make them more prone to fungal
contamination, with either yeast
or moulds.
A family of blends of MIT/BIT containing
stabilised zinc pyrithione (ZnP) have been
developed under the name ACTICIDE
ICB with enhanced fungal activity. These
products contain differing concentrations
of MIT, BIT and ZnP to enable the correct
ratio to be used to provide excellent in-can
protection depending on the formulation
to be protected and for avoidance of any
additional labelling requirements.
Laboratory studies have shown that the
inclusion of the ZnP along with MIT/BIT has
not only improved efficacy against moulds
and yeasts but also provides superior
performance towards more tolerant and
resistant bacteria and, thus, maximum
in-can protection of finished products.
The inclusion of the ZnP gives benefits in
the overall antimicrobial performance, as
well as allowing for reduced levels of BIT
and/or MIT to be incorporated into the
finished product.
CONCLUSION
The use of biocides for in-can protection
utilising the biocidal active substances
2-Methyl-2H-isothiazolin-3-one (MIT) and
1,2-benzisothiazolin-3-one (BIT) have
enabled many years of production of
water-based products with good margins
of safety against microbial contamination.In
specific situations where tolerant organisms
have developed, the combination of
MIT and BIT with bronopol has proved
successful both in prevention and
treatment scenarios.
Combination of MIT/BIT with CIT/MIT
allows the advantages of CIT to be utilised
while avoiding additional labelling and
achieving good long term in-can protection.
The further and latest development
of special blends with stabilised zinc
pyrithione to provide the maximum
protection against fungi and tolerant
bacteria provides the manufacturer of
aqueous products an enhanced range of
preservatives capable of meeting all their
in-can requirements.
PPCJ
References:1. Gillatt J, The microbial spoilage of polymer
dispersions and its prevention, in Directory of
Microbiocides for the protection of materials: A
handbook. Edited Paulus, W, Springer 2005.
Sample Active 3 days @ 65°C 7 days @ 65°C
Competitor A MIT 4.5 3.9
BIT 4.1 3.3
Competitor B MIT 4.6 1.9
BIT 4.5 2.7
Competitor C MIT 0.02 0.02
BIT 2.2 1.0
Competitor D MIT 4.6 0.1
BIT 4.9 1.8
ACTICIDE® MBS 5050 MIT 4.8 4.5
BIT 5.0 4.6
Competitor E MIT 4.6 3.8
BIT 5.0 4.2
Competitor F MIT 4.1 0.01
BIT 4.6 1.8
ACTICIDE® MBS 5050 MIT 4.8 4.5
BIT 5.2 4.8
Table 2. Analysis results (%) of eight MIT/BIT biocides stored at 65°C
Author: Kevin Roden, Regional Technical Manager, Thor Specialities Tel: +61 2 9725 1177; Email: [email protected]: www.thor.com
© T
ho
r
Willy A. Bachofen AG CH-4132 Muttenz 1Switzerland
INNOVATIVE MILLINGTECHNOLOGY AT THE HIGHEST LEVEL
DYNO®-MILL ECM-AP SERIE
We provide machines for wet milling technology − tailored to individual needs, consistently representing the state of the art and oriented towards innovative research for the future. For decades, WAB has been a leading specialist in the field of grinding and dis-persion with thousands of the world famous DYNO®-MILL products installed worldwide. Service and sales offices located throughout the world mean we are also in your neighbourhood, and pleased to provide professional consulting.
If you have a question, we have the answer.
+41 (0)61 6867 100 [email protected] www.wab.ch
BIOCIDES
22 PPCJ • February 2017www.coatingsgroup.com
There has been a continuous increase
in the toxicological, ecological and
regulatory demands in the use of
in-can biocides in the paint industry. Toxic
components, such as heavy metals, which
were once part of paint formulations,
have already been banned in most
countries. Many existing actives, such as
formaldehyde, have been gradually phased
out of the system. Biocide manufacturers
are facing increased expectations over
‘sustainable antimicrobials’ in recent times.
Microbial problems associated with paintsPaints and coatings of all types are used
to protect the underlying substrates
of various kinds or to decorate them
for an aesthetic look. Water-based
paint formulations represent an ideal
environment for the growth and
proliferation of micro-organisms because
of their available water, nutritional sources,
oxygen and adequate temperature. The
source of contamination may be the raw
materials, water for production, plant
design, good manufacturing practices,
etc. In general, any water-based raw
material can be highly susceptible to
contamination with bacteria, fungi or
algae. Microbial contamination in paints
may lead to various physio-chemical
changes in the formulation, such as
viscosity drop, change in pH, colour,
odour, etc.
Control of micro-organisms in paints
and coatings can be achieved by minimal
efforts. This includes proper house-
keeping, knowledge of the factors that
contribute to the microbial attack and, most
important, the use of an appropriate ‘in-can
biocide’. Historically, chemistries used as
in-can preservatives in paints include heavy
metals, phenolic compounds, aldehydes,
isothiazolinones and many more.
Performance of in-can biocides depends
on the paint formulation, pH of the system
and the plant conditions at the formulator
sites. Since paints, with high bio-burden
formulations, consume more biocide
actives than those with low bio-burdens,
maintaining plant hygiene helps to reduce
biocide demands.
Considering the performance
expectations of the paint manufacturers,
the general criteria for an effective in-can
preservative include1:
• Broad spectrum of action
• Fast speed of control
• Long-lasting action
• Safe for use for human health and
the environment
• Compatibility with the formulation
(pH, colour, odour, viscosity, cross
linking, etc)
• High water solubility
• Easy to formulate
• Cost effective at recommended use level
Types of in-can biocidesMany active ingredients have been used
as an in-can biocide, some of them were
very effective to meet the antimicrobial
efficacy but not the environmental,
health or regulatory expectations. Phenyl
mercuric acetate (PMA) and similar mercury
compounds were used as water-based
paint additives during the 1970s, some
countries kept using it until the 1990s.
Mercuric compounds helped to extend
the shelf life of products, by controlling
bacterial fermentation in-can as well, by
preventing fungal and algal attack in the
dry film. However, mercury and mercuric
compounds were discontinued as in-
can preservatives because of health and
environmental factors associated with these
compounds. Elemental and methylmercury
are toxic to the central and peripheral
nervous systems. The inhalation of mercury
vapour can produce harmful effects on the
nervous, digestive and immune systems,
lungs and kidneys, and may be fatal2.
Mercuric compounds were replaced
by formaldehyde/formaldehyde donors
as the in-can preservative. The toxicity
and carcinogenicity of formaldehyde are
matters of current concern in the scientific
and regulatory community. The European
Union has classified formaldehyde as a
carcinogen. Any product containing ≥0.1%
free formaldehyde needed to be classified
as Human Carcinogen Cat 1B from January
2016. Thus, formaldehyde is generally
being phased out of use, due to concerns
about health effects on people exposed
to it3,4.Many of the paint companies have
made it mandatory that the biocides they
use are free of mercury, formaldehyde and
other heavy metals. Moreover, various
regulatory bodies have come up with
stringent norms to regulate the use of in-
can biocides. (See figure 1).
Over the decades, paint ingredients
also have adopted several of these
changes because of the voluntary actions
from paint manufacturers to offer more
sustainable and consumer friendly
chemistries. These chemistries are proven
to be more acceptable from a health and
environmental point of view. Also stringent
norms put forward by different government
bodies also enhanced these actions.
The United States Consumer Product
Safety Commission announced a ban on
lead containing paint in 19775. Another
significant change was the shift from
solvent-based paints to water-based.
From a microbiological perspective,
all these changes have generated
an accommodating environment for
micro-organisms to both survive and
also proliferate6. This created the
necessity for safe and eco-friendly
biocides and more than that, awareness
among the consumers about the
importance of these. Thus, recent focus
in in-can biocides has been the shift
towards ‘sustainable chemistries’ for
sustainable solutions.
SUSTAINABLE BIOCIDES
Sustainable chemistry, also called green
chemistry, focuses on the design of
products and processes that minimise
the use and generation of hazardous
substances7. Different criteria have already
been established for a chemical to be
called ‘sustainable’8.
Biocides are an important ingredient for in-can preservation of water-based paints, as
Sreenivas KM and Subhash Nair, Dow Microbial Control, discuss
Sustainable biocides: Perspectives in in-can paint preservation
www.coatingsgroup.com/mecs/dubai #MECSDubai
The largest coatings event for the Middle East
and Gulf Region
13 – 15 March 2017DWTC, Dubai, UAE
BIOCIDES
24 PPCJ • February 2017www.coatingsgroup.com
Principles of sustainable biocides builds
on these values, integrating economic
viability and social benefi ts across the
life-cycle of the product. More sustainable
products require more effi cient use of
materials and resources, and must also
be profi table and useful to society. One
of the important criteria for a sustainable
biocide is that it avoids waste formation,
making it economical by minimising the
waste treatment and cleaning regimes.
Low toxicity, renewable raw materials, no
solvents and minimal energy for production
and usage are the other characteristics of a
sustainable biocide (Table 1).
In effect a sustainable biocide
• Should do its job by controlling and
preventing the growth of harmful
micro-organisms
• Should be easily degradable, non-
persistent in the environment, non-
accumulative in biological systems, be
easily collected and recycled, reused
or destroyed
• It should not harm the
� Workers, products or processes
� Downstream users and consumers
and the
� Environment or society
Sustainable activesBiocides satisfying the requirements
of a ‘sustainable biocide’ can be pure
chemistries or formulations. Most of the
available sustainable actives fall into the
category of isothiazolinones. Substances
containing an isothiazolinone ring have
activated N-S bonds, which may react
with nucleophilic cell entities of the
micro-organisms with the opening of
the isothiazolinone ring, thus exerting
antimicrobial activity.
Isothiazolinone biocides are widely
used in a variety of applications for control
of microbial growth. The most frequently
used active is CMIT/MIT – which is a 3-1
ratio mixture of 5-chloro-2-methyl-4-
isothiazolin-3-one (CMIT) and 2-methyl-4-
isothiazolin-3-one (MIT). These biocides
inhibit the growth of bacteria, fungi, yeasts,
moulds and algae in water-based products.
Isothiazolinones are formulated as liquids
and are active over a broad pH range9.
Kathon LXE biocide from Dow Microbial
Control (DMC) is a CMIT/MIT-based
formulation to preserve paints, binder
dispersions and other technical products
meeting the sustainable requirement. CMIT/
MIT has become one of the most important
sustainable actives for in-can preservation
of paints (fi gure 2).
Benzisothiazolinone (BIT) products
have been used in a range of industrial
applications requiring long term
preservation for bacterial control,
including storage of products at
elevated temperatures. With a thermal
decomposition of >300°C, BIT is stable and
effective over a wide pH range from 4-12.
BIT-based preservatives may be used for
the in-can protection of polymer emulsions,
latex paints and other water-based
products (fi gure 3).
Depending on the mode of application
(such as in-can and dry-fi lm preservative),
the speed (such as fast acting/slow
acting) and effi cacy patterns (such as
short term/long term), many more types
of isothiazolinones are available in the
market. However, with the increase in
market share for quality products and with
the regulatory inputs thereof, expectations
over the performance of these biocides
have increased. Ideally no single biocide
active can achieve these manufacturing
and regulatory expectations. Synergistic
performance of two or more actives were
tried to address these developments.
The combination of two or more
active ingredients helps with the synergy
among these. This means, less amounts
of each active brings the same inhibitory
effect than when either of the actives are
used alone. Thus, blends of actives may
allow manufacturers to protect a product
at reduced levels, providing not only a
potential cost benefi t but also a product
that is more environmentally friendly. In
addition, blends of actives may have a
better compatibility profi le than when each
of the active ingredients are used alone.
Furthermore, the ability to protect a product
with lower use levels of certain actives may
circumvent labelling issues9,10.
Rocima 631 (Dow Microbial Control),
is such a formulation, available in the
market, that combined CMIT/MIT and
BIT in a single formulation. Using this
formulation, the paint gets a fast and stable
performance from the active CMIT/ MIT
and the property of prolonged preservation
over a wide range of pH and temperatures
from the active BIT. The demand and
effi cacy of biocides varies from region to
region and biocide combinations have
Fig 1. Evolution of in-can biocides
Fig 2. Structure of CMIT/MIT
Fig 3. Structure of BIT
1. Prevent waste
2. Atom economy
3. Less hazardous synthesis
4. Design benign chemicals
5. Benign solvents and auxiliaries
6. Design for energy effi ciency
7. Use of renewable feedstocks
8. Reduce derivatives
9. Catalysis (vs stoichiometric)
10. Design for degradation
11. Real-time analysis for pollution
prevention
12. Inherently benign chemistry for
accident prevention
Table 1. The 12 principles of sustainable
chemistry11
Water-borne Protection
Discover Pliotec® HDT resins for the formulation of glossy Direct-To-Metal (DTM) enamels and anti-corrosive primers. Pliotec
to ferrous and non-ferrous metals, water resistance, gloss
Pliotec HDT resins are ideal for decorative and light-industrial applications.
For further information on Pliotec HDT 12 and Pliotec HDT 16, please visit www.omnova.com/hdt-de
For more than 100 years, our innovations have helped businesses attain meaningful and unique performance advantages that customers and end users value. Today more than ever, we help businesses build better brands.
We listen, we collaborate, and we create what you need
level. How can we help you?
Visit www.omnova.com to learn more.
The Science
Booth F 16
BIOCIDES
26 PPCJ • February 2017www.coatingsgroup.com
been an effective solution to cater for
these requirements.
Next generation biocidesWith the increasing awareness on
sustainable chemistries and with the
diffi culties in obtaining regulatory approvals
to commercialise them, there has been
a limited number of actives registered as
‘in-can paint preservative’ over the past
couple of decades. Signifi cant expertise
and fi nancial commitments are required to
introduce a new active on to the market.
N-methyl-1,2-benzisothiazol-3(2H)-one
(MBIT) introduced by Dow Microbial
Control in 2014, is considered to be ‘this
century’s fi rst and latest biocidal active for
coatings preservation’.
MBIT provides paint and latex
manufacturers with a high-performing
in-can preservative for low-VOC water-
based systems, which, in line with the
requirements of the major global paints and
coating eco-label schemes, without the
need of any performance boosters. MBIT
is reported to provide rapid kill of microbes
in the paint system with a prolonged
preservative effi cacy6.
With the enhanced technical
performance and satisfactory credentials
to meet the regulatory and environmental
expectations, MBIT can be seen as the
future biocide for in-can preservation
of paints.
CONCLUSION
Biocides are one of the most important
ingredients for the in-can preservation of
water-based paints. Mercuric compounds
and other heavy metals, which were
once a part of paint formulations, have
been banned from the system based on
toxicological and ecological perspectives.
Formaldehyde, another effective biocide,
has been regulated in many countries and
is gradually being phased out on these
grounds. The regulatory perspectives
and movements to go for sustainable
chemistries have increased the demand
for alternatives in paint preservation.
Isothiazolinones and their derivatives have
been the most accepted biocide to meet
these criteria. However, regulatory and
ecological outlooks have been questioned
frequently, which has increased the
importance for new actives to be used for
in-can preservation. These expectations
demand developing new actives that
have lower VOCs, are effective at lower
concentrations and are toxicologically safe.
MBIT, the recently introduced active into
the preservative basket, is considered to
meet the existing and future needs of the
in-can biocide market.
PPCJ
Author: Dr Sreenivas KMCustomer Application Specialist, Middle East and Africa, Dow Microbial ControlDow Chemicals IMEA GmbH, Emaar Square, Bldg 6/Level 3, PO 7893Dubai, UAEEmail: [email protected]: www.dowmicrobialcontrol.comDr Subhash NairRegional Marketing Manager, Middle East and Africa, Dow Microbial Control
References1. Rossmoore, H W (2012), Handbook of Biocide and Preservative Use, Springer Science &
Business Media.
2. Biocide Optimization: Blends of Actives, PCI Magazine, July 2004 http://www.pcimag.com/
articles/85244-biocide-optimization-blends-of-actives.
3. Arch Toxicol. 2013 Jan; 87(1): 217–222.
4. Commission Regulation (EU) No 605/2014 of 5 June 2014.
5. Consumer Product Safety Commission website. zttp://www.cpsc.gov/en/Recalls/1977/CPSC-
Announces-Final-Ban-On-Lead-Containing-Paint.
6. Beth Ann Browne, PCI Magazine, April 2014 http://www.pcimag.com/articles/98919-new-
biocidal-active.
7. ‘Green Chemistry’. United States Environmental Protection Agency. 2006-06-28. Retrieved 2011-03-23.
8. Asastas P T and Warner J C. Green Chemistry: Theory and Practice. Oxford University Press,
Oxford (1998).
9. Paulus, W (2005). Directory of Microbicides for the Protection of Materials: A Handbook 2005th Ed.
Netherlands Springer.
10. Ashraf, M A, Ullah, S, Ahmad, I, Qureshi, A K, Balkhair, K S, & Abdur Rehman, M (2014). Green biocides, a
promising technology: current and future applications to industry and industrial processes. Journal of the
Science of Food and Agriculture, 94(3), 388-403.
Epoxy resin market analysisThe global epoxy resin market size was
US$7.99bn in 2015. Growing end-use
industries including transportation, marine
coatings, aerospace, electrical & electronic
laminates, composites and decorative
powder coatings are expected to augment
the global epoxy resins demand. This trend
is anticipated to continue over the forecast
period as a result of increased infrastructure
and automotive demand.
Favourable properties, such as high
thermal stability, mechanical strength,
moisture resistivity, adhesion, electrical,
mechanical and heat resistance make
epoxy resins suitable for various end-use
applications, such as laminates, jewellery,
insulators and industrial applications.
Increased R&D coupled with technology
advancement in the fi eld of modifi ed resins
is expected to create new avenues for
industrial applications. Global demand is
fueled by increased wind energy capacity
installation due to rapid depletion of
conventional sources of energy.
Availability of polyurethane and
phenolic resins, as alternatives in various
applications, coupled with volatility in raw
material (bisphenol-A & epichlorohydrin)
prices is expected to restrict market growth.
Paints and coatings were the largest
application segment accounting for
around 40% of the global epoxy resins
demand in 2015. It is extensively used in
paints & coatings as it dries quickly and
provides a protective, tough coating with
excellent hardness. Growing construction
and automotive industries, on account of
increasing disposable income, coupled
with changing lifestyle, have been a major
driving factor for the segment. Increasing
use of resin-based coatings as primers
in automotive and marine paints, and
for corrosion resistance in metal cans
and containers is expected to augment
the demand.
Epoxy demand in automotive and
industrial applications is projected to grow
on account of superior heat resistance as
compared to latex-based or alkyd-based
paints. Growing demand from waterborne
coatings, powder coatings, electrical &
electronic laminates, fl ooring and paving
applications is expected to further increase
the growth.
The report, Epoxy Resin Market Analysis
By Application (Paints & Coatings, Wind
Turbine, Composites, Construction,
Electrical & Electronics, Adhesives) And
Segment Forecasts To 2024 is available
from www.grandviewresearch.com
Measure 4 Bresle equivalent readings, in less than 3 minutes, with the Elcometer 130SSP
COMPLIES WITH:NSI 009-32
BRESLE EQUIVALENTISO 8502-9 TEST METHOD
CLEANLINESS
Measu
re·
FAST
· REPEATABLE ·
ACCURATE · D
URABL
E
SURFACE
27 PPCJ - February 2017 www.coatingsgroup.com
MKR & Co. is an Independant Distributor of specialty
additives to the, Plastics, Rubber and Coatings industries
and is proud to offer The Shell range of Gas to liquid (GTL)
Technical and Food grade white Oils.
The Risella X grades are designed for Technical applications
in Coatings, Plastics and Rubber applications amongst
others, whilst the Ondina X grades are treated to a higher
level of purity for use in Cosmetic , Food packaging and
Pharmaceutical applications.
For further information and technical specificationsplease contact [email protected] call +44(0) 151 2363191www.mkr.co.uk
MKRMeade-King, Robinson & Co. Ltd.
BIOCIDES
28 PPCJ • February 2017www.coatingsgroup.com
The increasing demand for more
environmentally friendly interior
paints is going hand–in-hand with
more strict regulations of Volatile Organic
Compounds, VOCs, Semi Volatile Organic
Compounds, S-VOCs and biocides in
the final products. The proposed new
requirements of Ecolabel states that
the total level of residual monomers in
polymers may not be more than 100ppm.
Furthermore, there is a discussion about
reducing the allowed amount of 2-methyl-
2H-isothiazol-3-one, MIT, to be used
to 15ppm.
As a producer of waterborne
polymer binders for indoor paints we
have to consider all these proposals
and discussions. Therefore, an acrylic
binder, which meets even the proposed
requirements regarding reduced levels
of residual monomers and biocides, has
been developed.
INTRODUCTIONAs consumers have become more aware
of the impact of coatings on indoor air
quality there has been a demand for
more environmentally friendly paints. To
get a paint eligible for the EU Ecolabel
or Nordic Ecolabel, several criteria of the
paint must be fulfilled. The amount of
white pigment used has to be low enough
but concurrently the spreading rate or
hiding power should be high enough. The
amounts of allowed VOCs and S-VOCs, are
restricted not to talk about the amount of
in-can biocides. Carcinogenic, mutagenic,
toxic or other hazardous components are
certainly not allowed to be used. In Table 1 the most important criteria of today for
indoor paints are briefly summarised.
On March 15, 2016 the Committee for
Risk Assessment, RAC, adopted an opinion
on harmonised classification and labelling
for 2-methylisothiazol-2(2H)-one, MIT. RAC
proposes that the concentration limit for H
317 will be decreased to 15ppm and the
EU H208 labelling limit to 1.5ppm. If this
classification enters into force, MIT will not
be allowed at concentrations of 15ppm
and above in products intended for the
general public, ie DIY market. Furthermore
for the Nordic Ecolabel criteria there is a
suggestion that the allowed total amount
of residual monomers in the binder should
be limited to 100ppm. To be able to meet
all these proposed limits in the future
a novel waterborne acrylic binder has
been developed.
LOW MFFT IS NEEDED FOR LOW VOC AND S-VOC
For producing a paint with a low amount
of VOC (boiling point ≤250°C) and S-VOC
(boiling point >250°C) content, the paint,
preferably, has to be formulated without
coalescing agents. To achieve a good film
formation without coalescing agents the
minimum film formation temperature, MFFT
and the glass transition temperature, Tg, of
the binder have to be low enough. But with
a low Tg of the binder, there is a risk that
the polymer film of the binder or the paint
becomes quite soft or even tacky, which
means that the blocking resistance of the
paint becomes poor. By producing polymer
particles in a two-stage process, combining
two different Tg to a core-and-shell
morphology, the hardness of the polymer
film can be increased, although the MFFT
is kept on a low level. Although the novel
binder has an MFFT <0°C the blocking
resistance is good enough for interior wall
paints. Furthermore, the pigment binding
capacity of the binder is excellent and high
performance paints with outstanding scrub
resistance can be produced.
LOW RESIDUAL MONOMERS FOR FRESH INDOOR AIR QUALITY
Waterborne polymer dispersions are
produced by free radical emulsion
polymerisation, which rarely proceeds to
completion. Depending on the monomer
composition the total amount of residual
monomers can be quite high, even up
to 1000ppm. As monomers used for
producing polymer dispersion binders
usually are classified harmful to health
and toxic or even acutely toxic, they are
highly undesirable in the final paint. Their
presence in the paint may create hazards to
painters as a result of long-term exposure
during painting. Therefore, the suggestion
for Nordic Ecolabel is that the total amount
of residual monomers in the final product
will not be allowed to exceed 100ppm in
the future.
There are several techniques for
reducing residual monomer content. Using
a combination of these techniques and
optimising the process conditions allow
the best performance to be reached.
Knowing how various volatile components
An acrylic binder, which meets proposed requirements, regarding reduced levels of residual monomers and biocides, has
been developed that also keeps indoor air quality as fresh as possible, as Gun Lundsten, CH-Polymers Oy, discusses
How to improve environmental profile of wall paints
Fig 1. Environmentally friendly interior paints can be formulated with the novel
acrylic binder
Kaneka MS Polymer™Your premium polymer
of choice
European Coatings Show 2017
Visit Kaneka at Hall 1 - Booth 1-430
www.kaneka.be
29 PPCJ - February 2017 www.coatingsgroup.com
Turnkey solutions for paint and coatings manufacturing
www.oliverbatlle.com
Tel.: +34 93 464 10 10Ctra. de Mataró, 39 – 47
E-08911 Badalona (Spain)
Visit us atBooth B - 1513 - 15 March 2017
BIOCIDES
30 PPCJ • February 2017www.coatingsgroup.com
can be removed is a result of many
years’ experience and gives total residual
monomer content well below 100ppm.
LOW BIOCIDE LEVELS GUARANTEE NON-ALLERGIC PRODUCTS
To increase the level of protection for
persons who are sensitive to chemical
substances, the European authorities
introduced a new additive labelling from
June 1, 2015 according to the EUH208
statement. Several important in-can
biocides, like CIT/MIT, MIT and BIT are
classified as sensitising substances and
the concentration limits for labelling were
decreased to 15ppm, 100ppm and 50ppm,
respectively. Only nine months later the
Committee for Risk Assessment has come
up with a proposal to further reduce the
European limit EUH208 of MIT to 1.5ppm
and the H317 limit to 15ppm. As MIT is very
effective and has been broadly used the
proposal causes headaches for the binder
and paint producers, who have to find
alternative biocides and solutions.
MIT can, of course, be replaced both in
the binder and in the paint by other in-can
biocides. However, the alternatives like
BIT or OIT are not as efficient as MIT and
have to be added in higher amounts, which
means that the product has to be labelled
according to EUH208. To avoid labelling
our novel binder is biocide free but with a
pH of 10. The high pH preserves the binder
from bacterial activity during the delivery
and during storage at the customer.
Accordingly the paint producers can then
themselves choose the most suitable in-
can biocide package for the paint.
FORMULATION OF ENVIRONMENTALLY FRIENDLY PAINTS
By optimising the composition of the binder
we have got the desired properties of the
binder, Table 2. The total residual � 34
White pigment content Limit (g/m2)
Scrub class 1 40
Scrub class 2 36
Wall and ceiling 25
Other paints 36
Spreading Rate Hiding power (%) Spreading rate (m2/l)
White and light colours ≥98 ≥8
VOC and S-VOC limit VOC (g/l) S-VOC (g/l)
White paints Tinted paints
Matt walls and ceilings (G60 <25) 10 30 40
Glossy walls and ceilings 40 30 40
Preservatives Limit (ppm)
Totally 600
MIT 100
BIT 400
2-OIT 400
CMI/MIT 15
Zinc pyrithione 500
Formaldehyde Limit (ppm)
Residuals level 10
Table 1. Some of the European Ecolabel criteria of today for interior paints
Solids % 50
pH 10
Brookfield viscosity 60rpm cP 1000
Average particle size nm 100
Minimum film formation temperature
°C 0
König film hardness s 7
Total rest monomer content ppm <100
Total VOC ppm <300
Total S-VOC ppm <700
No added biocides or carcinogenic, mutagenic, toxic or otherwise hazardous components
Table 2. Properties of the novel acrylic binder
Raw materials P 397-4
Pigment grind:
Water 18.2
HMHEC 0.2
2-amino-2-methyl-1-propanol
0.1
Dispersing agent 0.2
Wetting agent 0.2
Defoamer 0.1
In-can biocides 0.1
Titanium dioxide 18.2
Calcium carbonate, 5μm
7.3
Defoamer 0.1
Let down:
Water 2.2
HEUR rheology modifier
0.5
Novel acrylic binder 47
HASE rheology modifier
0.3
Water 5.3
Total 100.0
Paint properties
Solid content weight-% 49.7
VOC g/l < 0.5
S-VOC g/l < 0.3
pH 9,5 9.5
MFFT °C 0
Paint film
properties
Gloss 20° / 60° / 85°
GU 4 / 22 /
35
König hardness, 14d
s 14
Scrub resistance 28 d drying
• ISO 11998 μm 4
• EN 13300 class 1
Full opacity test
• White pigment content
g/m2 29
• Contrast ratio at 8 m2/l
% 98
• Spreading rate at CR 98%
m2/l 8
Table 3. An interior ecolabel PVC 25 paint
formulated with the novel acrylic binder
With more than sixty years experience in formulation process, Cellier Activity of ABB France engineers and supplies
resin manufacturing units based on in-house technologies in synthesis reaction and thermal exchange control. Resin
manufacturing units we design combine process solutions and control system in order to streamline your process,
optimising cycle times and operating costs as well as ensuring product quality, process safety and energy efficiency.
Our skidded approach brings modularity in your plant and is adapted to greenfield, expansion or modernisation projects
worldwide. For more information, visit www.abb.com/chemical
—ABB resin production units:streamline your process to enhance efficiency and quality.
ABB France - Industrial Automation Division - Cellier Activity700 bd. Jean-Jules Herbert, F-73100 Aix-Les-BainsPhone: +33 479 35 05 65 - Fax: +33 479 88 37 71E-mail: [email protected]
31 PPCJ - February 2017 www.coatingsgroup.com
Quality products for smart solutions
Epoxy & polyurethane systems for coatings
Tank lining epoxy systems
Adhesives & sealants
Fibers & resins for composites
Electro casting resins
DIY adhesives
© 2
017
BO
DO
MÖ
LLER
CH
EMIE
Ara
ldit
e® a
nd
Ara
du
r® a
re r
egis
tere
d t
rad
emar
ks o
f H
un
tsm
an C
orp
orat
ion
or
an a
ffi l
iate
th
ereo
f in
on
e or
mor
e, b
ut
not
all,
cou
ntr
ies.
Bodo Möller Chemie Middle East FZEDubai (UAE) · Phone +971 4 8813 833 · [email protected]
Visit us at MECS 2017, Booth G05
Engineer chemistry
BODO MÖLLER CHEMIEwww.bm-chemie.ae
32 PPCJ • February 2017www.coatingsgroup.com
BIOCIDES
The European Commission’s review of
biocides, under the European Union
(EU) biocidal product regulation
(widely known as the BPR, regulation No
528/2012), could lead to restrictions and
bans of preservatives and paints essential
to the market, industry experts have told
Polymers Paint Colour Journal.
Biocidal products are defined by the
Commission in a March 17 report on
sustainable biocide use as disinfectants
and wood preservatives widely used in
materials, such as paints, textiles and wood
to protect them against microbial, fungi or
insect decay.
“We are concerned that key biocide
preservatives could be taken off the
market or severely restricted, which would
have a significant impact on the shelf
life and durability of coatings”, said the
European Council of Paint, Printing Ink
and Artists’ Colours Industry’s (CEPE)
Technical Director Didier Leroy, “The overall
consequence would be the generation of
more waste, CO2 emissions and energy
consumption, which would go against
sustainable development”.
Indeed, “all biocides used in the paints
industry could be targeted”, he said – in the
review programme that is scheduled to run
until December 31, 2024.
IN-CAN PRESERVATIVESOne group at risk, he said were the in-can
preservatives releasing formaldehyde
[a strong-smelling gas], as they are all
likely to become classified as carcinogen
category 1B and this means activation of
the exclusion criteria. Another important
family of in-can preservatives is made
up of isothiazolinones, which are all skin
sensitisers [substances that can cause
allergic reactions following skin contact].
“Several downstream user industries worry
severe restrictions could be applied to
them, especially for consumer products”,
said Leroy.
CEPE and the British Coatings
Federation (BCF) are also particularly
concerned about the future of anti-fouling
(AF) paints and coatings used on the
bottoms of boats to stop algae or barnacle
growth. “These are already regulated
in some member states under national
legislation but this will be replaced by
the BPR regime”, said Mr Leroy, who
is concerned this could spark EU-
wide controls.
“Our members are actively preparing
their authorisation dossiers as copper,
the key biocide for most AF paints, has
been approved. But AF paints for which
no dossier is submitted by the end-2017
deadline must be removed from the market
within six months.”
This will harm industry, Mr Leroy
continued, as “our members will only
be able to support a limited number
of AF paints due to the high cost and
business uncertainty of the BPR approval
system. Therefore, one can expect
the number of future AF paints to be
significantly reduced”.
The BCF Chief Executive Officer Tom
Bowtell agreed, telling PPCJ: “Analysis
of the current risk assessment paradigm
reveals a significant number of products
are likely to fail the assessment process,
resulting in an absolute loss of between
70-90% of products from the market.” This
suggests the risk assessment models “do
not adequately reflect real world scenarios”
or “the protection goals applied in the
review process have been set too high”,
he said.
The benefits of AF paints were not
considered in the evaluation process, Mr
Bowtell added, warning: “Reduced use
will lead to a greater transfer of invasive
marine species from one world marine
environment to another, negatively
affecting the balance within the world’s
marine ecosystems.”
AUTHORISATION PROCESSUnder the BPR, when all relevant active
substances have been approved at EU
level, a biocidal product requires an
authorisation from either an EU member
state or the European Commission before
it can be placed on the market. Companies
can choose between several alternative
authorisation processes, all in general long
and cumbersome for industry.
Products need to meet strict exclusion
criteria (for example carcinogenicity) and
substitution criteria (to show alternatives
are not safer) – and the BPR’s enforcement
of mandatory data sharing between
companies, the Commission and ECHA is
also unpopular.
An ECHA spokesperson agreed that
biocides targeted for restrictions or bans
included storage and film preservatives
(type 6 and 7 under the BPR), notably
the formaldehyde releasers MBO
and HPT.
“We are aware of an ongoing
discussion about the reduced availability
for biocidal products based on either
the class of formaldehyde releasers
EU biocides assessment will damage paint and coatings market, industry claims, as Liz Newmark in Brussels reports
Restrictions and bans
Incubator with various algae cultures used
for testing the algicidal function of coatings
for outdoor applications in Leverkusen.
These coatings are used among others for
ships to protect them against algae growth.
Image: Lanxess AG
33 PPCJ - February 2017 www.coatingsgroup.com
parmetol® grotan®
high performance preservatives
For total protection against harmful microorganisms, we have one focus: everything. Our products prevent contamination, extending the life of many materials and finished products. This saves valuable resources and ensures a longer shelf life.
Find out more at www.schuelke.com and meet us at Rainbow booth G 01.
Schülke & Mayr GmbH 22840 Norderstedt | GermanyTel. +49 40 521 00-0 | Fax -244www.schuelke.com | [email protected]
Use biocides safely. Always read the label and product information before use.
34 PPCJ • February 2017www.coatingsgroup.com
BIOCIDES
or on isothiazolinones like MBIT”, the
spokesperson told PPCJ.
“MBO and HPT will be classified as
carcinogen category 1B, hence they will
be subject to the exclusion criteria at some
point. However, this does not matter for us
as they are actually not used in paint as in-
can preservatives”, Mr Leroy said. However,
he predicted that MBIT, a new substance
from the isothiazolinone family, is “expected
to be approved without significant
restriction”, although “before being placed
on the market Dow must apply for product
authorisation, which will take another
couple of years”.
COMMUNICATE BENEFITSTo help biocides be accepted, Mr Leroy
urged the industry to “get together and
communicate the benefits of biocides”, for
example promoting safe AF use. With that
aim, the BCF is launching a ‘safe antifouling
initiative’ next year.
For general coatings, the risks of
market withdrawal are smaller as the
difficulty of maintaining them on the
market does not depend directly on the
BPR but indirectly through the future
availability of preservatives. “The only
burden is linked to additional labelling”, Mr
Leroy explained, noting industry’s 2015
voluntary labelling initiative for the in-can
preservative MIT “shows we can act as a
responsible industry ‘waiting’ for legislation
to be developed”.
Meanwhile, the industry welcomed the
non-legislative focus of the Commission’s
sustainable biocide use report, calling for
the review to be completed quickly but
not for additional mandatory measures, as
“risks are already appropriately addressed
through the conditions of approval of active
substances or the authorisation of biocidal
products”, as well as via EU worker health
and safety legislation.
“The next priority actions…need to
focus on improved education to assure
the optimal use of biocides”, said the
European Chemical Industry Council’s
(CEFIC) European Biocidal Products
Forum Manager, Dr Raf Bruyndonckx. The
report called for awareness campaigns
through websites, in-store leaflets or quick-
response (QR) codes on biocidal products.
The Commission, acknowledging
industrial painting equipment is already
designed to minimise biocide exposure,
with calibrated dosing of in-can
preservatives and anti-fouling paint
sprayers, also recommended “best practice
guidelines” in its report, including making
manufacturers supply gloves with anti-
foulants for non-professional users.
UK UNCERTAINTYMeanwhile, in the UK, additional
uncertainty remains over what will happen
to biocides legislation under Brexit. In a
November 4 blog post, the BCF’s Bowtell
said the government must “avoid being
cut adrift from the European chemicals
regulatory framework as this will cause the
multinational players to seriously consider
moving production to mainland Europe
and even some of our larger SMEs have
threatened to do so.
“To have a separate UK registration
system for the thousands of raw materials
used in UK coatings and printing
ink production would be completely
uneconomic for BCF members, large and
small”, he noted.
PPCJ
Contact: International News Services Website: www.internationalnewsservices.com
�30 How to improve environmental profile of wall paints
monomer content is less than 100ppm,
total VOC less than 300ppm, total S-VOC
less than 700ppm and no biocide added.
This makes it possible for the paint
producer to formulate an environmentally
friendly paint fulfilling the Ecolabel criteria or
even the more demanding proposed Nordic
Ecolabel criteria.
An interior paint with PVC 25 has
been made according to the formulation
in Table 3. The scrub resistance of the
paint is outstanding and applies to class 1
according to EN 13300. As the formulation
is made without coalescing agents, the total
VOC and S-VOC of the paint are very low.
The contrast ratio fulfils the requirement of
98% at spreading rate 8m2/l. This means
that the white pigment content is 29g/m2
ie well below the required 40g/m2. As no
biocide has been added to the binder, the
paint producer can choose freely a suitable
in-can biocide package for the paint.
SUMMARYBy using the novel acrylic binder,
environmentally friendly paints maintaining
fresh indoor air quality can be produced.
Furthermore the paints will fulfil the Ecolabel
criteria and even the proposed more strict
Nordic Ecolabel requirements.
PPCJ
Acknowledgements
The laboratory technicians Anna
Kivikankare and Saija Vehviläinen are
thanked for the laboratory work including
synthesis of the binders, preparation of the
paints and execution of the tests. My other
colleagues are thanked for their valuable
comments on this paper.
Author: Gun Lundsten R&D Manager, Paints & Coatings, CH-Polymers OyRaisionkaari 55, FI-21200 Raisio, Finland Tel: +358 50 5390263 Email: [email protected]: www.ch-polymers.com
This paper was presented at the Advances in Coatings
Technology - ACT’16 conference, organised by the Institute
for Engineering of Polymer Materials and Dyes, Paint and
Plastics Department, Poland
References• Official Journal of EU, (2014/312/EU), C (2014) 3429.
• Nordic Ecolabel, Version 3.1, 5 Dec 2015-31 Dec 2019.
• ATP of CLP Regulation (EC No 1272/2008).
Ima
ge
: T
ho
r
Ima
ge
: T
ho
r
Sponsored by: Organised by:
Safari Park Hotel, Nairobi, Kenya13 – 14 June 2017
Innovative Coatings Solutions
The organiser of the East African Coatings Congress 2017 is pleased to invite industrial and academic professionals to present papers addressing new developments and techniques in the coatings industry.
The Congress will cover a range of topics from polymers, pigments, additives, testing equipment, environmental issues, to regulations and standards, which are relevant to this region.
The event gives a unique platform for suppliers to present their products and services and talk face-to-face with the most influential decision makers operating within the market in a relaxed environment.
The East African Coatings Congress 2017 provides the ultimate business experience, combining a two-day Conference and Exhibition.
www.coatingsgroup.com
Call for Papers
Conference papers If you wish to be a speaker please contact: Kieran Proverbs [email protected]
Please note: Papers that are too commercial in nature will, unfortunately, not be accepted.
Deadline: Title, abstract (maximum 150 words), short biography (maximum 200 words) and speaker photo: March 3rd, 2017
36 PPCJ • February 2017www.coatingsgroup.com
MERGERS & ACQUISITIONS
PPCJ ’s review of mergers and acquisitions is compiled by leading industry expert and consultant, Louis McCulloch
M&A global review 2016
Louis McCulloch provides an
overview of the mergers and
acquisitions in the coatings
industry, which have taken
place during the past year
With the review now in its eighth year,
its aim is to collect, analyse, set out
and comment on the mergers of all
sizes and types in the global paint and coatings
industry across the supply chain. The information
is collected assiduously throughout the year
on a world-wide basis and is only concerned
with paints and coatings, not with printing inks,
adhesives, sealants and the like. We try to
capture all the relevant data but sometimes might
miss a trick, though not unsurprisingly often the
miss gets picked up later and is consolidated in
the following year’s report. Now to business.
UPWARD TREND IS MAINTAINED2015 proved to be a record year in the history of
this review in terms of the number of transactions
and 2016 looks as though it is heading in the
same direction, viewed from results to the end of
November. If previous years are any indication,
December is a good month for last minute deals
completed before the end of the calendar year
and there are usually transactions reported in
the early New Year, which were announced or
completed in the previous one.
Again, as with 2015, this begs the question
why so much M&A activity. It is interesting to
link this point with the outlook for 2016 given by
some of the industry majors at the beginning
of the year. AkzoNobel expected economic
volatility to continue with limited support from the
market, placing the emphasis on organic growth
and bolt-on acquisitions. Similarly PPG saw
continued global economic growth but at varied
pace and mixed by major economy. Its focus was
on increased organic growth, aggressive cost
and productivity initiatives. Kansai anticipated
continued acceleration of global development
in its business, which, in hindsight, clearly
foreshadowed its comprehensive takeover
activities during the year. One could draw the
conclusion that, with many of the world markets
not being in helpful mode coupled with interest
rates being very attractively low, M&A moved
higher up corporate agendas.
SUPPLY CHAIN DYNAMICSTraditionally the number of transactions by
coatings manufacturers almost always exceeded
that of the raw material manufacturers. That
statistic swung comprehensively the other
way in 2015, only to correct itself and return
to the normal pattern in the year under review.
Coatings manufacturers achieved an all-time
record number of deals in 2016 to date, with
more likely to come before the year closes. It is
even possible that raw material manufacturers
could, themselves, be close to their own record
achieved in 2015, still with many multi-million and
billion dollar deals. Certainly the long-run upward
trend in raw material distributors continues, albeit
at a steadier pace than the record year of 2015.
Elsewhere in the supply chain the steady trade in
equipment suppliers and applicators was once
more in evidence.
Not much ever seems to find its way into the
‘Other’ category. So, interestingly in the services
side and maybe a first or a first for a long time,
MarketResearch.com completed its acquisition
of the veteran Freedonia Group, a Cleveland-
based supplier of industry research reports and
consulting services.
In a similar vein, we have oft-times commented
that M&A deals with paint and coatings large
retail side customers and the like in particular
appear very infrequently in the trade media and,
hence, that important aspect of the industry
receives scant attention in these pages.
PREMIER LEAGUE SPENDING SPREEA year ago at this time we reported that M&A
transactions among the premier league of
paint and coatings manufacturers came to a
shuddering halt in 2015, in the face of cheap
finance and a flush of global mega deals in many
other industries. Seven out of 11 companies there
opted for strategies other than acquisition, the
first time since the downturn of 2009.
Louis McCulloch Tel: +44 1306 740767;
Table 2. 2010 2011 2012 2013 2014 2015 2016 (to end
November
Coatings Manufacturers 23 43 36 45 42 39 50
Coatings Distributors 3 3 0 2 11 2 6
Raw Material Manufacturers 17 44 29 38 41 48 43
Raw Material Distributors 8 7 8 4 6 17 11
Equipment Suppliers 5 3 8 9 11 10 4
Applicators 10 4 9 9 13 10 7
Pretreatment Manufacturers 0 1 2 0 0 0 0
Other 1 4 0 0 0 2 3
Total 56 109 92 107 124 128 124
2008 2009 2010 2011 2012 2013 2014 2015 2016 (to
end November)
94 56 69 109 92 107 124 128 124
Table 1.
Super Orion : Pulversisation of Mineral Materials
SUPER ORION BALL MILL. S.O.WELCOME TO OUR FINE WORLD
SEE YOU ON OUR BOOTH: N O1
www.hosokawa-alpine.com // [email protected]
YOUR ADVANTAGES AT A GLANCE
For ultrafine industrial minerals fillers e.g. Calcium Carbonate
High tech superfine ball mill for producing of ultrafine industrial mineral fillers
Intergrated vertical slotwall
Selection of superfine grinding media
Frequency converter for high precision speed control and a soft start up
Option: Ball mill on load cells, for precision weighing and control of the mill filling
Process technologies for tomorrow.
37 PPCJ - February 2017 www.coatingsgroup.com
Durable titanium dioxide extender for high quality matt paints
Opacilite™
T H E A P P L I C A T I O N O F M I N E R A L S C I E N C E
- Up to 20% TiO2 extension
- Outstanding dry hiding in matt and silk paints
- Excellent weathering performance in exterior coatings
- Effective above and below coating CPVC
- For use in high quality matt and silk paints
Visit us at MECS stand F06a and ECS stand 7-333
38 PPCJ • February 2017www.coatingsgroup.com
MERGERS & ACQUISITIONS
Who then could possibly have forecast
the gold rush that has characterised 2016?
Twenty-five deals in the year to date and
no doubt more to come in the final month.
That compares with 11 in 2015 and 18 in
the previous highest year of 2008. Not
only that but every major, with the single
exception of Jotun, participated – the
first time this has happened since the
review began.
AkzoNobel returned to winning ways,
with two deals including the heavyweight
BASF industrial coating business. The
new management at Axalta continued the
pace it had set and more. BASF extended
its reach into Automotive, Aerospace, Coil
and Metal Forming pre-treatment markets
with the several billion dollar takeover of
Chemetall. Kansai was as good as its
word, expanding globally with deals in the
USA, Saudi Arabia and Turkey. Nippon,
still consolidating its Nipsea megadeal,
even so managed to form a Marine joint
venture in Germany. PPG showed no let-
up in its recent track record, though at a
reduced level, taking, amongst others, the
US$200M application specialist MetoKote
Corporation. RPM even outdid itself this
year, completing around the world a record
number of acquisitions of businesses with
sales ranging from US$6M to US$26M.
Enhancing its position as a premier global
supplier, Sherwin-Williams had just one
deal but a ground-breaking US$11.3bn
offer for Valspar. Valspar itself managed to
tuck one transaction in before the Sherwin-
Williams announcement, that was Isva
Vernici, Italian coil coatings business.
USA STILL OUT ON ITS OWN With apologies for playing the same record
once again but with more than half of
global transactions coming from the USA
and more than half again ending up there,
the USA remains by far the dominant
force in the consolidation of the industry
supply chain. Other long-term buyers
tend to come from several countries in
Europe, notably Germany, though Japan’s
contribution is also
much in evidence. There
are some recent signs
that China is beginning
to make an appearance
on the buyside, a
welcome development
of which hopefully more
in the future. India, too,
may be getting out of
the blocks, appearing
for the first time as
a buyer.
Countries that are
net and long-term
sellers (or to put it
another way, attractive
targets) continue to be
Brazil, though not this
year, Italy, Switzerland,
Canada, Australia and
Russia. Spain and
Turkey put in a maiden
appearance, though only
time will tell whether this
is a spike or not.
LOOKING AHEAD TO 2017Early bird 2017
forecasters RPM expect global markets
to remain volatile, along with currency
headwinds, though RPM’s overall sales
growth in the 4%-6% range could be
pointing to continuing M&A prospects.
PPG’s update on its third quarter results
saw the company continuing to operate
in a ‘sluggish economic environment with
no clear near-term catalyst for improving
global GDP growth’.
Much the same came from AkzoNobel,
with ‘challenging conditions in several
countries and segments’. Looking at
prospects from an M&A viewpoint, pretty
much similar comments were made going
into 2016 in what has proved to be a bumper
year. In the round, it may all come down to the
availability of attractive finance and how long
that holds out for.
STOP PRESSIn the first week of December Kansai Paint,
which had been very active in M&A during
the year, announced that it will acquire
Luxembourg-based Annagab SA, the
holding company of Helios in Slovenia, from
Ring International for €572M. The turnover
of Ring’s Coatings Group, ranked 17th
in EMEA, reached €390M in 2015, split
Decorative 24%. Industrial 39%, Powder
7% and Resins 30%. The transaction is
the third largest in the year after Valspar
and Chemetall. Ring International holds a
91% stake in the company. The remaining
9% is held by Templeton Strategic
Emerging Markets Fund IV. The transaction
is scheduled to take effect around
March 2017.
For M&A updates see pages 46 and 48 PPCJ
Table 3. 2011 2012 2013 2014 2015 2016 (to
end Nov)
AkzoNobel 2 2 1 0 0 2
Axalta 0 0 0 1 1 4
BASF 1 0 0 0 0 2
Kansai 1 0 1 0 0 3
Nippon (inc Nipsea) 0 0 0 1 0 1
PPG 3 2 1 9 6 3
RPM 4 4 2 3 3 7
Sherwin-Williams 1 2 0 1 0 1
Valspar 1 0 2 0 1 1
Jotun 0 0 0 0 0 0
Origin 2011 2012 2013 2014 2015 2016 (to
end Nov)
USA 51 46 45 69 65 69
Germany 14 11 15 16 13 11
UK 2 7 10 5 8 5
Netherlands 3 5 3 3 7 7
Belgium 4 0 4 1 5 3
France 1 5 0 4 5 4
Sweden 3 3 6
China 2 2
Japan 4 2 4 3 0 6
Finland 4 0 2
India 3
Switzerland 3
Destination 2011 2012 2013 2014 2015 2016 (to
end Nov)
USA 36 37 44 53 55 64
Brazil 2 5 2 7 8 0
China 4 1 3 7 4 0
Germany 14 7 11 6 9 5
UK 3 1 10 6 12 6
France 6 3 1
Italy 1 6 2 5 1 5
Mexico 4 0 1
Switzerland 4 4 3 4 2 1
Canada 8 1 0 3 3 4
Netherlands 5 3 2 3 5 6
Saudi Arabia 2 0 3 2 0 1
Colombia 1 0 0
Finland 1 1 0
India 2 3 3 1 2 3
Singapore 1 0 0
Australia 3 2 3 0 3 2
Belgium 3 2 1 0 1 2
Russia 1 3 2 0 0 0
South Africa 2 0
Spain 3
Turkey 3
39 PPCJ - February 2017 www.coatingsgroup.com
East African Coatings Congress Safari Park Hotel, Nairobi, Kenya 13 – 14 June 2017
www.coatingsgroup.com/eacc
Where the leading East African coatings professionals meet, debate and get deals done
Sponsored by:
Organised by:
NEW DATE DUE TOPOPULAR DEMAND
40 PPCJ • February 2017www.coatingsgroup.com
MERGERS & ACQUISITIONSM
on
thC
ou
ntr
yA
cqu
irer
Acq
uis
itio
nS
ale
sP
rice
Main
Coati
ng
s M
ark
ets
Com
men
ts
AP
PLIC
AT
OR
Dec
US
A*A
baka
n In
cR
etai
n 2
2%
of
Mes
oCoa
t I U
SA
US
An
/aU
S$
5M
The
rmal
Spr
ayD
ebt
sett
lem
ent
with
Pan
aman
ian
Geo
rge
Tow
n A
ssoc
iate
s &
Son
oro
Inve
st
Dec
US
A*K
ISC
O L
tdS
peci
alty
Coa
ting
Sys
tem
sU
SA
n/a
n/a
Con
form
alM
edic
al d
evic
e, e
lect
roni
cs, au
tom
otiv
e an
d m
ilita
ry in
dust
ries
Dec
US
A*P
reco
at M
etal
sC
onso
lidat
ed M
etal
Pro
duct
s In
cU
SA
n/a
n/a
Coi
lA
pplic
atio
n on
car
bon
stee
l, st
ainl
ess,
and
alu
min
ium
. 10
0 e
mpl
oyee
s
Sep
US
AM
B A
eros
pace
Hol
ding
s In
cVA
C A
ero
Kal
isz
Sp
zoo
PL
n/a
n/a
The
rmal
Spr
ayFo
r in
dust
rial
gas
tur
bine
com
pone
nts
and
aero
spac
e en
gine
s
Jun
US
AP
PG
Indu
stri
es In
cM
etoK
ote
Cor
pora
tion
US
AU
S$2
00M
n/a
E-co
at, po
wde
r co
atin
g, li
quid
pain
t an
d ot
her
cust
om c
oatin
gs
To d
eliv
er p
roce
ss e
ffici
ency
and
str
eam
line
coat
ings
ope
ratio
ns
Jan
US
AP
raxa
ir S
urfa
ce T
echn
olog
ies
Inc
JV w
ith G
E A
viat
ion
LLC
US
An
/an
/aA
eros
pace
Ded
icat
ed c
oatin
g so
urce
to
supp
ort
grow
th o
f G
E’s
new
eng
ine
plat
form
s
Oct
US
AP
raxa
ir S
urfa
ce T
echn
olog
ies
Inc
Maj
orit
y jv
with
GE
Avi
atio
nU
SA
n/a
n/a
Aer
ospa
ceC
oatin
g op
erat
ions
in U
SA
and
Sin
gapo
re
Jan
US
AP
reci
sion
Coa
ting
Co
Inc
Boy
d C
oatin
gs R
esea
rch
Co
Inc
US
An
/an
/aFl
uoro
poly
mer
Med
ical
dev
ice
and
high
ly e
ngin
eere
d co
mpo
nent
s m
arke
ts
Aug
US
AS
afw
ay G
roup
Hol
ding
LLC
Dal
co S
ervi
ces
Inc
CA
n/a
n/a
Pro
tect
ive
Lini
ng, co
atin
g an
d ab
rasi
ve b
last
ing
thro
ugho
ut W
este
rn C
anad
a
Oct
US
AW
ism
arq
Indu
stri
es L
LCP
rior
Coa
ted
Met
als
Inc
US
An
/an
/aC
oil
Pre
-pai
nted
ste
el a
nd a
lum
iniu
m
EQ
UIP
ME
NT
Dec
Ger
man
y*J
Wag
ner
Gm
bH
CA
Tec
hnol
ogie
s LLC
US
An
/an
/aS
pray
Equ
ipm
ent
Man
ufac
ture
r of
spr
ay g
uns
and
pain
t fin
ishi
ng e
quip
men
t
Apr
US
AA
met
ek In
cB
rook
field
Eng
inee
ring
Lab
orat
orie
s In
cU
SA
US
$5
5M
US
$16
7M
Inst
rum
enta
tion
Lead
ing
man
ufac
ture
r of
vis
com
eter
s an
d rh
eom
eter
s
Aug
US
AFi
ltert
ech
Inc
US
Cen
trifu
ge S
yste
ms
LLC
US
An
/an
/aEq
uipm
ent
Aut
omat
ic a
nd m
anua
l bas
ket
type
cen
trifu
ges
Nov
US
AIC
TC G
roup
Hol
ding
s
Cor
pora
tion
Cla
rian
t P
last
ics
& C
oatin
gs L
td b
usin
ess
ITn
/an
/aTin
ting
Equi
pmen
tItal
tinto
mac
hine
s, g
yros
copi
c m
ixer
s an
d co
lour
mat
chin
g so
ftw
are
May
US
AK
Alp
ha L
LCB
owm
an A
naly
tics
LLC
US
An
/an
/aIn
stru
men
tatio
nFo
r m
easu
rem
ent
and
anal
ysis
of
coat
ing
thic
knes
s
MA
NU
FA
CT
UR
ER
Jan
US
AA
CT
EG
A W
ITM
erge
r w
ith A
CT
EG
A K
elst
arU
SA
n/a
n/a
Pac
kagi
ng, P
rint
ing
To f
orm
AC
TEG
A N
orth
Am
eric
a In
c
Feb
The
Net
herl
ands
Akz
oNob
el N
VB
AS
F In
dust
rial
Coa
tings
DE
€3
00
M€
47
5M
Coi
l, Fu
rnitu
re, C
omm
erci
al
Vehi
cle
Als
o co
atin
gs f
or f
oil a
nd p
anel
, w
ind
ener
gy a
nd g
ener
al in
dust
ry
May
Sin
gapo
re**
Kus
to G
roup
Inc
Tam
bour
Ltd
IL€
110
MU
S$
144
MD
ecor
ativ
e, In
dust
rial
Isra
el's
larg
est
pain
t m
anuf
actu
rer
and
expo
rter
Jul
The
Net
herl
ands
Akz
oNob
el N
VR
emai
ning
40
% A
kzo
Nob
el P
owde
r
Coa
tings
SA
E
EG
n/a
n/a
Pow
der
Str
engt
heni
ng p
ositi
on in
the
Mid
dle
Eas
t an
d N
orth
Afr
ica
Oct
US
AA
mer
ican
Sec
uriti
es L
LCC
hrom
aflo
Tech
nolo
gies
Cor
pU
SA
n/a
n/a
Col
oura
nts,
Pig
men
t D
ispe
rsio
nTo
exp
and
prod
uct
offe
ring
s, g
eogr
aphi
es a
nd m
arke
t re
ach
Sep
US
AA
very
Den
niso
n C
orp
Han
ita
Coa
tings
RC
A L
tdIL
n/a
n/a
Film
s &
Coa
tings
Labe
l, pr
int,
app
lianc
e an
d gl
ass
secu
rity
indu
stri
es
Jul
US
AA
xalta
Coa
ting
Sys
tem
s LL
CH
igh
Per
form
ance
Coa
ting
Sdn
Bhd
MY
n/a
n/a
Refi
nish
To o
ffer
bro
ader
ran
ge o
f pr
oduc
ts a
nd v
alue
pro
posi
tions
Jun
US
AA
xalta
Coa
ting
Sys
tem
s LL
CD
ura
Coa
t P
rodu
cts
Inc
US
An
/an
/aC
oil,
Indu
stri
alIn
clud
ing
coat
ings
for
alu
min
ium
ext
rusi
ons
and
tube
s in
teri
or a
nd e
xter
ior
Jul
US
AA
xalta
Coa
ting
Sys
tem
s LLC
Uni
ted
Pai
nt a
nd C
hem
ical
Cor
pora
tion
unit
US
An/a
n/a
The
rmop
last
icA
utom
otiv
e in
stru
men
t pa
nels
, co
nsol
es a
nd a
ppliq
ues
Jun
Ger
man
yB
AS
F S
EC
hem
etal
l AG
CH
US
$8
45
MU
S$
3.2
bnP
retr
eatm
ents
Aut
omot
ive,
aer
ospa
ce, co
il an
d m
etal
for
min
g m
arke
ts
Apr
Ger
man
yB
AS
F S
EG
uang
dong
Yin
fan
Che
mis
try
Co
Ltd
CN
n/a
n/a
Refi
nish
Bro
aden
refi
nish
por
tfol
io a
nd d
istr
ibut
ion
netw
ork
May
Indi
aB
NB
Coa
tings
Indi
a Lt
dB
erge
r P
aint
s In
dia
Ltd
jv b
usin
ess
INn
/an
/aP
last
ics
JV w
ith N
ippo
n P
aint
Aut
omot
ive
Coa
ting
Co
Ltd,
Jap
an
Jul
US
AC
arly
le G
roup
LP
Sal
e of
rem
aini
ng 2
0%
in A
xalta
Coa
ting
Sys
tem
s Lt
d
US
An
/aU
S$
1.2
bnA
utom
otiv
e, R
efini
sh, In
dust
rial
Hav
ing
sold
25
M s
hare
s in
May
20
16 in
an
offe
ring
for
US
$7
00
M
Jun
US
AFe
rro
Cor
pora
tion
Pin
tura
s B
enic
arló
SL
ES
€7.
5M
€15
MG
lass
Dec
orat
ion
of c
onta
iner
gla
sses
for
per
fum
e, c
osm
etic
, fo
od, be
vera
ge
DeFelsko Corporation � Ogdensburg, New York USATel: +1-315-393-4450 � Email: [email protected]
Award Winning Compatibility! The PosiTector gauge body accepts ALL coatingthickness (6000/200), environmental (DPM), surface profile (SPG/RTR), salt contamination(SST), Shore hardness (SHD) and ultrasonic wall thickness (UTG) probes
Coating Thickness� Ferrous � Non-Ferrous � Ultrasonic
Surface Profile� Depth Micrometer � Replica Tape Reader
Environmental Conditions� Built-in � Separate Magnetic Probe
PosiTector® InspectionUnrivaled probe interchangeability
Shore Hardness� Shore A � Shore D
Salt Contamination� Bresle Method
Ultrasonic Wall Thickness� Corrosion � Multiple Echo Thru-Paint
41 PPCJ - February 2017 www.coatingsgroup.com
Application paper/Paint test charts HIGH QUALITY
Please ask for free charts for test by or E-mail: [email protected]
ø · DK-4700 Naestved ··
Charts with specialdeveloped surface,UV withextremely high
over
100%without white.
from 10 x 15 cmto 45 x 64 cm
News - News - News
Now we producewith
your company too.
LOGO XX
See the pricelist and our selection at thewebsite: www.applicationpaper.com
42 PPCJ • February 2017www.coatingsgroup.com
MERGERS & ACQUISITIONSM
ayLu
xem
bour
gFl
int
Gro
up S
AA
mer
ican
Inks
& C
oatin
gs C
orp
US
An
/an
/aO
verp
rint
, P
acka
ging
To s
tren
gthe
n po
sitio
n in
pap
er &
boa
rd a
nd fl
exib
le p
acka
ging
Jul
Luxe
mbo
urg
Flin
t G
roup
SA
Dru
ckfa
rben
Ltd
UK
n/a
n/a
Ove
rpri
ntTo
str
engt
hen
coat
ings
por
tfol
io a
nd s
ervi
ce o
ffer
ing
in t
he U
K a
nd Ir
elan
d
Jun
US
AFl
orid
a P
aint
s In
cS
cott
Pai
nt C
ompa
ny In
cU
SA
n/a
n/a
Dec
orat
ive,
Pro
tect
ive
Man
ufac
turi
ng f
acili
ty a
nd 1
7 s
tore
s in
Flo
rida
’s G
ulf
Coa
st r
egio
n
Sep
Fran
ceG
roup
e S
ocom
ore
SA
Lord
Cor
pora
tion
prod
uct
lines
US
An
/an
/aA
eros
pace
Cle
anin
g so
lven
ts, liq
uid
shim
s, s
urfa
ce p
repa
ratio
n
Jun
US
AH
A-U
SA
Inc
50
% J
V H
A In
tern
atio
nal L
LCU
SA
n/a
n/a
Res
ins
Res
in c
oate
d sa
nd f
or s
hell
mou
ldin
g an
d re
frac
tory
coa
tings
Jan
Net
herl
ands
IHI H
auze
r Te
chno
Coa
ting
BV
Cro
mat
ipic
tec
hnol
ogy
ex S
IDA
SA
Engi
neer
ing
ES
n/a
n/a
Pre
trea
tmen
tsR
epla
ces
elec
trop
latin
g on
var
ied
plas
tic s
ubst
rate
s an
d al
umin
ium
allo
ys
Nov
Japa
nK
ansa
i Pai
nt C
o Lt
dS
audi
Indu
stri
al P
aint
Com
pany
Ltd
SA
¥6
00
Mn
/aP
rote
ctiv
eTo
acc
eler
ates
not
onl
y an
ticor
rosi
on b
ut a
lso
cons
truc
tion
busi
ness
Oct
Japa
nK
ansa
i Pai
nt C
o Lt
d5
0%
Pol
isan
Boy
a A
ST
Rn
/aU
S$
113
MD
ecor
ativ
eFo
r K
ansa
i's g
row
th s
trat
egy
in e
aste
rn E
urop
ean
mar
ket
Aug
Japa
nK
ansa
i Pai
nt C
o Lt
dU
S P
aint
Cor
pora
tion
US
AU
S$
36
MU
S$
51M
Refi
nish
, In
dust
rial
For
aut
omot
ive,
pow
er s
port
s an
d in
dust
rial
mar
kets
Feb
US
ALK
Q C
orpo
ratio
n4
0%
Pit
tsbu
rgh
Gla
ss W
orks
LLC
US
An
/an
/aA
utom
otiv
eP
PG
to
grow
mar
ket
posi
tion
in p
aint
, co
atin
gs a
nd s
peci
alit
y m
ater
ials
Aug
Sw
itze
rlan
dLo
oser
Hol
ding
AG
Div
est
Coa
tings
bus
ines
ses
AT
n/a
n/a
Woo
d, N
on-s
tick,
Pac
kagi
ngFe
yco,
Tre
ffer
t, Il
ag, S
chek
olin
Feb
US
AM
BO
fro
m H
empe
l A/S
Blo
me
Inte
rnat
iona
l Inc
US
An
/an
/aP
rote
ctiv
eR
ail,
oil &
gas
and
pow
er g
ener
atio
n
May
Japa
nN
ippo
n P
aint
Mar
ine
Coa
tings
Co
JV w
ith W
ilcke
ns F
arbe
n G
mbH
DE
n/a
n/a
Mar
ine
Form
atio
n of
Nip
pon
Pai
nt M
arin
e (E
urop
e) G
mbH
Jun
US
AO
lym
pus
Par
tner
s LLC
Enn
is-F
lint
Inc
US
An/
an
/aR
oad
Mar
king
Furt
her
expa
nd in
cor
e se
gmen
ts a
nd n
ew t
raffi
c sa
fety
cat
egor
ies
Nov
US
AP
PG
Indu
stri
es In
cR
emai
ning
50
% in
PP
G U
nive
r S
pA
ITn
/an
/aD
ecor
ativ
e, In
dust
rial
Incl
udin
g 12
ret
ail s
tore
s
Nov
US
AP
PG
Indu
stri
es In
cD
EU
TEK S
AR
O€
30
Mn
/aD
ecor
ativ
eIn
mor
e th
an 1
20 D
IY s
tore
s an
d 3
50
0 r
etai
l out
lets
Jul
US
AR
PM
Inte
rnat
iona
l Inc
Dur
am In
dust
ries
Pty
Ltd
AU
US
$6
Mn
/aC
onst
ruct
ion
Che
mic
als
Wat
erpr
oofe
rs f
or b
rick
, EIF
S, st
ucco
and
noi
se s
uppr
essi
on w
alls
Sep
US
AR
PM
Inte
rnat
iona
l Inc
Spe
cial
ty P
olym
er C
oatin
gs In
cC
AU
S$
26
Mn
/aP
rote
ctiv
e10
0%
sol
ids
epox
y an
d P
U c
oatin
gs f
or g
loba
l oil
and
gas
pipe
line
mar
ket
Mar
US
AR
PM
Inte
rnat
iona
l Inc
Rem
aini
ng 5
1% C
arbo
line
Dal
ian
Pai
nt
Pro
duct
ion
Co.
Ltd
CN
US
$11
Mn
/aP
rote
ctiv
eFo
r oi
l and
gas
, po
wer
and
pet
roch
emic
al p
roje
cts
Nov
US
AR
PM
Inte
rnat
iona
l Inc
Adh
ere
Indu
stri
al T
apes
Ltd
UK
US
$6
Mn
/aS
undr
ies
Foam
tap
es f
or c
onst
ruct
ion
and
indu
stry
Feb
US
AR
PM
Inte
rnat
iona
l Inc
Hol
ton
Food
Pro
duct
s C
oU
SA
US
$7
Mn/a
Add
itive
sFo
od s
tabi
liser
and
dry
egg
whi
te p
rodu
cts
for
bake
ry a
nd p
repa
red
food
s
Mar
US
AR
PM
Inte
rnat
iona
l Inc
Sea
l-K
rete
Inc
US
AU
S$
10M
n/a
Con
cret
eC
oncr
ete
care
coa
tings
and
sea
lant
s fo
r re
tail
mar
ket
Jul
US
AR
PM
Inte
rnat
iona
l Inc
App
lied
Pol
ymer
ics
Inc
& M
arke
ting
Ass
ocia
tes
Inc
US
AU
S$
14M
n/a
Sea
lant
s, C
oncr
ete
Exp
ansi
on jo
ints
, co
ncre
te r
epai
r, p
rote
ctiv
e co
atin
gs, pa
vem
ent
pres
erva
tion
Jul
Indi
aS
heen
lac
Pai
nts
Ltd
51/4
9 J
V w
ith J
enso
n an
d N
icho
lson
(Ind
ia) L
td
Indi
an
/an
/aD
ecor
ativ
e, In
dust
rial
, W
ood,
Aut
oTo
off
er c
ompl
ete
rang
e of
pai
nt s
olut
ions
and
pro
duct
s pa
n In
dia
Apr
Sw
itze
rlan
dS
ika
AG
L M
Sco
field
Com
pany
US
A€
15.6
Mn
/aC
oncr
ete
Con
cret
e co
lour
ing,
tex
turi
ng a
nd p
erfo
rman
ce s
yste
ms
Jun
UK
Spe
ncer
Coa
tings
Ltd
Per
form
ance
Pai
nts
Ltd
UK
n/a
n/a
Gla
ssLe
ader
in d
evel
opm
ent
of s
peci
alis
t w
ater
born
e co
atin
gs
Nov
Net
herl
ands
Sta
hl H
oldi
ngs
bvEag
le P
erfo
rman
ce P
rodu
cts
Inc
US
An
/an
/aFl
ame
Ret
arda
ntC
oatin
gs, re
sins
, ad
ditiv
es
Jan
Ger
man
yS
to S
E &
Co
KG
aA
Str
öher
Gm
bH
DE
€3
2M
n/a
ET
ICs
Ext
rude
d fr
ostp
roof
cer
amic
s fo
r ex
tern
al w
all i
nsul
atio
n
May
Finl
and
Tekn
os G
roup
Oy
Feid
al G
mbH
& C
o K
G u
nit
DE
€18
Mn
/aIn
dust
rial
Als
o th
e in
dust
rial
bus
ines
s of
Fei
dal P
olsk
a S
P z
oo in
Pol
and
Sep
Finl
and
Tekn
os G
roup
Oy
Dry
woo
d C
oatin
gs B
VN
L€
9M
n/a
Woo
dW
ater
-bas
ed f
or w
indo
ws,
sas
hes,
doo
rs, si
ding
s, in
teri
or d
oors
, fu
rnitur
e
Aug
US
ATe
nnan
t C
ompa
nyFl
oroc
k P
olym
er F
loor
ing
US
An/a
n/a
Floo
ring
For
com
mer
cial
, in
dust
rial
and
inst
itutio
nal a
pplic
atio
ns
Mar
US
AThe
She
rwin
-Will
iam
s
Com
pany
The
Val
spar
Cor
pora
tion
US
AU
S$
4.4
bnU
S$
11.3
bnD
ecor
ativ
e, In
dust
rial
, P
acka
ging
Enha
nces
pos
ition
as
prem
ier
glob
al p
aint
s an
d co
atin
gs p
rovi
der
Feb
US
AThe
Val
spar
Cor
pora
tion
Isva
Ver
nici
Srl
ITn
/an
/aC
oil
Pos
ition
will
impr
ove
glob
al p
rese
nce/
reac
h in
to N
orth
Afr
ica
and
the
Gul
f
Apr
US
AU
-C C
oatin
gs C
orpo
ratio
nN
ew Im
age
Coa
tings
LLC
US
An
/an
/aC
onst
ruct
ion
Che
mic
als
Wat
erpr
oofe
rs f
or w
ood,
com
posi
te d
ecki
ng, co
ncre
te,
mas
onry
Aug
US
AVa
lent
us S
peci
alty
Che
mic
als
Pai
nt O
ver
Rus
t P
rodu
cts
Inc
unit
US
An
/an
/aW
oodfin
ishe
sW
ood
floor
fini
shes
will
con
tinue
to
oper
ate
as A
bsol
ute
Coa
tings
Inc
THIS FAIR IS ORGANIZED WITH THE PERMISSION OF TOBB (THE UNION OF CHAMBERS AND COMMODITY EXCHANGES OF TURKEY) IN ACCORDANCE WITH THE LAW NO.5174
Media Partners
20-21 March 2018CONGRESS
22-24 March 2018
Hall 9-10-11-FOYER
EXHIBITION
7th International Paint, Paint Raw Materials, Construction Chemicals, Adhesives and Raw Materials, Laboratory and Production Equipments Exhibition and Congress
44 PPCJ • February 2017www.coatingsgroup.com
MERGERS & ACQUISITIONSJa
nU
SA
Vale
ntus
Spe
cial
ty C
hem
ical
s N
atio
nal P
aint
Indu
stri
es In
cU
SA
n/a
n/a
Pro
tect
ive
Floo
ring
, in
dust
rial
mai
nten
ance
, po
ol, m
arin
e
Feb
US
AW
R G
race
& C
oS
plit
into
GC
P A
pplie
d Te
chno
logi
es L
tdU
SA
n/a
n/a
Con
stru
ctio
n, P
acka
ging
Con
stru
ctio
n pr
oduc
ts, pa
ckag
ing
seal
ants
and
coa
tings
CO
AT
ING
S
DIS
TR
IBU
TO
R
Dec
US
A*F
inis
hMas
ter
Inc
Col
orM
aste
r A
utom
otiv
e P
aint
Inc
CA
n/a
n/a
Refi
nish
Acc
eler
ate
grow
th g
eogr
aphi
cally
and
max
imis
e se
rvic
e. 7
6 e
mpl
oyee
s
Oct
US
AA
cces
sa C
oatin
g S
olut
ions
Pai
nt a
nd L
acqu
er C
oU
SA
n/a
n/a
Indu
stri
al W
ood,
Met
al, P
last
ics
To e
xpan
d in
gre
ater
Den
ver, F
ort
Col
lins
and
Col
orad
o S
prin
gs
Aug
US
AA
xalta
Coa
ting
Sys
tem
s LL
CG
eera
ets
Aut
olak
BV
NL
n/a
n/a
Refi
nish
Cro
max
coa
ting
prod
ucts
in T
he N
ethe
rlan
ds f
or n
earl
y 4
0 y
ears
Jan
US
AFe
rro
Cor
pora
tion
Fere
r D
is T
icar
et V
e K
imya
salla
r A
noni
m
Sir
keti
AA
S
TR
n/a
US
$9
MG
lass
Dis
trib
utor
in T
urke
y of
Fer
ro c
olou
r an
d gl
ass
coat
ing
prod
ucts
Oct
US
AFi
nish
Mas
ter
Inc
Gue
lph
Pai
nt a
nd B
umpe
r S
uppl
ies
Inc
CA
n/a
n/a
Refi
nish
Dis
trib
utor
of
auto
body
and
aut
omot
ive
refin
ish
supp
lies
Apr
US
AFi
nish
Mas
ter
Inc
Ann
ex G
roup
Inc
US
An
/an
/aR
efini
sh, Fl
eet,
Mar
ine
Bod
ysho
p su
pplie
s in
Was
hing
ton
stat
e an
d C
alifo
rnia
. 8
0 e
mpl
oyee
s
Mar
US
AFi
nish
Mas
ter
Inc
Gla
dwin
Pai
nt C
ompa
nyUS
An
/an
/aR
efini
shEi
ght
loca
tions
in s
ever
al m
etro
polit
an m
arke
ts in
Tex
as.1
00 e
mpl
oyee
s
RM
MA
NU
FA
CT
UR
ER
May
US
AA
emet
is In
cEd
eniq
Inc
US
AU
S$
20
MU
S$
20
MC
hem
ical
sP
roce
sses
for
pro
duci
ng lo
w-c
ost
cellu
losi
c su
gars
and
eth
anol
Sep
Ger
man
y*S
ymri
se A
GP
inov
a H
oldi
ngs
Inc
US
AU
S$
28
7M
US
$3
97
MFr
agra
nces
, R
esin
sIn
gred
ient
s fr
om n
atur
al a
nd r
enew
able
sou
rces
Oct
US
AA
ir P
rodu
cts
and
Che
mic
als
Spi
n of
f Ve
rsum
Mat
eria
ls In
cU
SA
n/a
n/a
Elec
tron
ics
Sep
arat
ion
of t
he E
lect
roni
cs M
ater
ials
Div
isio
n
Jul
Bel
gium
Alln
ex S
arl
Nup
lex
Indu
stri
es L
tdA
Un
/an
/aR
esin
sG
loba
l man
ufac
turi
ng n
etw
ork,
inno
vativ
e pr
oduc
ts, ex
tens
ive
tech
nolo
gy
Jul
Ger
man
yA
ltan
a A
GA
ddco
mp
Hol
land
BV
NL
€10
Mn
/aA
dditi
ves
Ant
ifogg
ing,
flam
e re
tard
ancy
, he
at a
nd U
V st
abili
satio
n ap
plic
atio
ns
Jan
Ger
man
yA
ltan
a A
GM
elio
r In
nova
tions
Inc
US
An
/aU
S$
3.5
MC
eram
ics
To d
evel
op a
wid
e ra
nge
of n
ew p
rodu
cts
for
key
mar
kets
Feb
Indi
aA
pcot
ex In
dust
ries
Ltd
Om
nova
Sol
utio
ns In
dia
Pvt
Ltd
INn/a
Rs3
6 C
rore
Emul
sion
Pol
ymer
sP
aper
, ca
rpet
, co
nstr
uctio
n, p
aint
s, t
extil
e, a
utom
otiv
e in
dust
ries
Feb
US
AA
rsen
al C
apital
Par
tner
s LL
CFl
ow P
olym
ers
LLC
US
An/a
n/a
Add
itive
sD
ispe
rsio
ns t
o a
num
ber
of p
olym
er a
nd p
last
ics
end
mar
kets
Sep
US
AA
vant
or P
erfo
rman
ce
Mat
eria
ls L
LC
Nus
il Te
chno
logy
LLC
US
An
/an
/aC
hem
ical
sM
erge
r to
cre
ate
glob
al le
ader
in u
ltra-
high
-pur
ity
mat
eria
ls f
or li
fe s
cien
ces
Oct
Ger
man
yB
AS
F S
EJV
with
Ava
ntiu
mN
Ln
/an
/aC
hem
ical
sFo
r bi
o-ba
sed
fura
ndic
arbo
xylic
aci
d ch
emic
al a
nd b
uild
ing
bloc
k
May
Net
herl
ands
Ben
cis
Cap
ital
Par
tner
s B
VM
ajor
ity
BR
B H
oldi
ng B
VN
Ln
/an
/aC
hem
ical
sS
ilico
nes,
lube
oil
addi
tives
for
aut
omot
ive,
off
-roa
d, p
etro
chem
ical
mar
kets
Sep
US
AC
abot
Cor
pora
tion
80
% J
V w
ith In
ner
Mon
golia
Hen
gyec
heng
Sili
cone
Co
Ltd
CN
n/a
n/a
Add
itive
sTo
inve
st U
S$
60
M in
fum
ed s
ilica
pla
nt in
Wuh
ai, C
hina
Jul
Hon
g K
ong
Cat
hay
Indu
stri
esH
oove
r C
olor
Cor
pora
tion
US
An
/an
/aP
igm
ents
Mar
ket
lead
er in
nat
ural
occ
urri
ng u
mbe
rs a
nd t
rans
pare
nt ir
on o
xide
s
Oct
Bra
zil
Com
panh
ia N
itro
Quí
mic
a
Bra
sile
Alc
hem
ix C
orpo
ratio
nU
SA
n/a
n/a
Res
ins
Inks
, w
ood,
leat
her, r
efini
sh, ad
hesi
ves,
nai
l pol
ishe
s
May
US
AD
ySta
r LP
Five
Em
eral
d P
erfo
rman
ce M
ater
ials
LLC
US
An/a
n/a
Che
mic
als
Spe
cial
ties,
pol
ymer
add
itive
s an
d ni
trile
s bu
sine
ss g
roup
s
Nov
US
AEd
gew
ater
Cap
ital
Par
tner
sB
AS
F S
E In
orga
nic
Spe
cial
ties
busi
ness
US
An
/an
/aC
hem
ical
sA
lcoh
olat
es, B
oran
es a
nd A
lkal
i Met
als
May
Ger
man
yEv
onik
Indu
stri
es A
GA
ir P
rodu
cts
and
Che
mic
als
Inc
unit
US
A€
3.5
bnU
S$
3.8
bnA
dditi
ves
Spe
cial
ty &
Coa
ting
Add
itive
s bu
sine
ss (
Per
form
ance
Mat
eria
ls D
ivis
ion)
Oct
US
AFe
rro
Cor
pora
tion
Cap
pelle
Pig
men
ts N
VB
En
/a€
50
.5M
Pig
men
tsC
oatin
gs, in
ks, pl
astic
s
Aug
US
AFe
rro
Cor
pora
tion
Del
ta P
erfo
rman
ce P
rodu
cts
LLC
ass
ets
BE
n/a
n/a
Col
oura
nts
Con
cret
e an
d ou
tdoo
r ha
rdsc
ape
mar
kets
Mar
Sou
th A
fric
aFe
rro
Sou
th A
fric
a P
ty L
tdS
ynth
omer
plc
uni
tZ
AZ
AR
44
5M
€13
MA
dditi
ves
Pol
ymer
dis
pers
ions
bus
ines
s in
Sou
th A
fric
a
Feb
Ital
yG
F B
ioch
emic
als
Ltd
Seg
etis
Inc
US
An
/an
/aC
hem
ical
sA
sset
s an
d le
vulin
ic a
cid
plan
t in
Min
neso
ta
Oct
US
AH
IG C
apital
LLC
Sta
ke in
Dom
inio
n C
olou
r C
orpo
ratio
nC
An
/an
/aP
igm
ents
Pig
men
ts a
nd p
repa
ratio
ns f
or c
oatin
gs, pl
astic
s an
d in
k in
dust
ries
May
US
AH
oney
wel
l Inc
Spi
n-of
f A
dva
nSix
Inc
US
AU
S$
1.3
bnn
/aR
esin
sP
olym
er r
esin
s an
d ch
emic
al in
term
edia
tes
Aug
US
AH
unts
man
Cor
pora
tion
Spi
n-of
f sp
ecia
lity
chem
ical
bus
ines
s
in 2
017
US
An
/an
/aTitan
ium
Dio
xide
Titan
ium
dio
xide
use
s fr
om f
ood
colo
urin
g an
d pa
ints
to
suns
cree
n
Aug
Net
herl
ands
IGM
Res
ins
BV
BA
SF
phot
oini
tiato
r un
itD
En
/an
/aR
esin
sFo
r fu
rnitu
re c
oatin
gs, flo
orin
g, p
rint
ing
and
pack
agin
g in
ks
45 PPCJ • February 2017www.coatingsgroup.com
MERGERS & ACQUISITIONSA
ugU
SA
Inno
spec
Inc
Hun
tsm
an C
orpo
ratio
n un
itEU
n/a
US
$2
25
MA
dditi
ves
Sur
fact
ant
man
ufac
turi
ng f
acili
ties
in F
ranc
e, It
aly
and
Spa
in
May
Chi
naJi
angs
u S
inor
gche
m T
ech
DyS
tar
LP b
uine
ss u
nits
US
An/a
n/a
Add
itive
sP
olym
er A
dditi
ves
and
Nitr
iles
busi
ness
es
Sep
US
AK
eyst
one
Ani
line
Cor
pora
tion
Col
our
Syn
thes
is S
olut
ions
Ltd
UK
n/a
n/a
Che
mic
als
Col
oure
d an
d no
n co
lour
ed fi
ne c
hem
ical
s, b
espo
ke c
hem
istr
y se
vice
s
Sep
Ital
yLa
mer
ti S
pA
Sup
erco
lori S
pA
.IT
n/a
n/a
Add
itive
sP
olyu
reth
ane-
base
d po
lym
eric
mic
rosp
here
s, o
ther
coa
tings
add
itive
s
Sep
Ger
man
yLa
nxes
s A
GC
hem
tura
Cor
pora
tion
US
A€
1.5
bn€
2.4
bnA
dditi
ves
Flam
e re
tard
ant
and
lubr
ican
t ad
ditiv
es
Aug
Aus
tral
iaLe
af R
esou
rces
Ltd
JV w
ith C
laer
is L
LCU
SA
n/a
n/a
Che
mic
als
To d
evel
op G
lyce
ll pr
oces
s fo
r re
new
able
che
mic
al p
roje
cts
Nov
Fran
ceLe
s D
ériv
és R
ésin
ique
s et
Terp
én
Pin
ova
Inc
US
AU
SA
US
$11
0M
US
$15
0M
Res
ins
Adh
esiv
es, co
nstr
uctio
n, c
oatin
gs, ty
res
May
US
AR
eich
hold
LLC
2M
erge
r w
ith P
olyn
t S
pA
ITn/a
n/a
Res
ins
Als
o in
term
edia
tes,
pla
stic
iser
s, a
dditi
ves
and
com
poun
ds
Jun
UK
Rev
olym
er p
lcItac
onix
Cor
pora
tion
US
An
/aU
S$
7M
+
US
$6
M
Res
ins
Dev
elop
s an
d co
mm
erci
aliz
es p
olym
ers
from
itac
onic
aci
d te
chno
logy
Nov
Sau
di
Ara
bia
Sau
di A
rabi
an O
il C
ompa
nyN
ovom
er In
c bu
sine
sses
US
An
/aU
S$
100
MC
hem
ical
sC
onve
rge
poly
ol t
echn
olog
y fo
r C
AS
E ap
plic
atio
ns
Nov
Japa
nS
how
a D
enko
KK
GM
M D
evel
opm
ent
Ltd
CN
n/a
n/a
Non
-stic
kC
hem
ical
s fo
r no
n-st
ick
coat
ings
May
Bel
gium
Sol
vay
SA
Rem
aini
ng 5
0%
Pri
mes
ter
US
An
/an
/aR
esin
sTo
end
cel
lulo
se a
ceta
te p
rodu
ctio
n JV
Mar
UK
Syn
thom
er p
lcH
exio
n In
c P
erfo
rman
ce A
dhes
ives
&
Coa
tings
US
A€
33
0M
€2
01.
6M
Res
ins,
Add
itive
sD
ispe
rsio
ns, ad
ditiv
es, po
wde
r co
atin
gs, sp
ecia
lity
mon
omer
s
Sep
US
ATe
soro
Cor
pora
tion
Viren
t In
cU
SA
n/a
n/a
Che
mic
als
Low
car
bon
bio-
base
d fu
els
and
chem
ical
s
Apr
Japa
nU
BE
Indu
stri
es L
tdM
ergi
ng U
BE
Che
mic
al &
UB
E
Engi
neer
ing
Pla
stic
s
ES
n/a
n/a
Che
mic
als
Cap
rola
ctam
, am
mon
ium
sul
phat
e, fi
ne c
hem
ical
s, n
ylon
Jul
UK
Uni
on C
olou
rs L
tdR
olfe
s C
olou
r P
igm
ent
Inte
rnat
iona
lZ
An
/an
/aP
igm
ents
The
onl
y or
gani
c pi
gmen
t m
anuf
actu
rer
in A
fric
a
Apr
UK
Valtr
is S
peci
alty
Che
mic
als
Akc
ros
Hol
ding
s Lt
dU
Kn/a
n/a
Add
itive
sFo
r po
lym
ers,
sea
lant
s an
d ch
emic
al in
term
edia
tes
Feb
US
AW
R G
race
& C
ompa
nyS
plit
into
W R
Gra
ce &
Co
US
An
/an
/aC
hem
ical
sG
loba
l sup
plie
rs o
f ca
taly
sts
and
engi
neer
ed m
ater
ials
Apr
US
AW
R G
race
& C
ompa
nyB
AS
F’s
Cat
alys
ts d
ivis
ion
DE
n/a
n/a
Add
itive
sG
reat
er p
lant
thr
ough
put,
pol
ymer
dif
fere
ntia
tion
acro
ss p
olyo
lefin
pro
cess
es
RM
DIS
TR
IBU
TO
R
Dec
US
A*U
niva
r In
cP
olym
er T
echn
olog
ies
Ltd
UK
n/a
n/a
UV
& E
BTo
for
mul
ate
envi
ronm
enta
lly r
espo
nsib
le p
aint
s, in
ks a
nd a
dhes
ives
Nov
Bel
gium
Aze
lis H
oldi
ng S
AM
erge
r of
GM
Z an
d E
W K
aufm
ann
US
An
/an
/aC
hem
ical
sO
ne b
rand
enc
ompa
ssin
g M
idw
est,
Ohi
o Va
lley
and
Nor
th E
ast
regi
ons
June
Ger
man
yB
renn
tag
AG
Rem
aini
ng 4
9%
of
Zho
ng Y
ung
(Int
erna
tiona
l) C
hem
ical
Ltd
CN
n/a
n/a
Che
mic
als
Indu
stri
al c
hem
ical
dis
trib
utor
in t
he k
ey e
cono
mic
reg
ions
in C
hina
Nov
Ger
man
yB
renn
tag
AG
EP
Che
m In
tern
atio
nal P
te L
tdS
GU
S$
54
.6M
n/a
Wax
esP
erso
nal c
are,
coa
tings
, ad
hesi
ves
and
roofi
ng a
nd p
avin
g
Jun
Net
herl
ands
GEO
TEC
H In
tern
atio
nal B
VP
aille
ttes
et
Pig
men
ts S
arl
FRn
/an
/aP
igm
ents
Dis
trib
utor
for
pea
rles
cent
pig
men
ts f
or c
osm
etic
s, m
aste
rbat
ches
and
dec
o
Jul
Mex
ico
GT
M H
oldi
ng S
AH
igh
Che
m S
peci
altie
s S
A d
e C
VM
XU
S$
40
Mn
/aC
hem
ical
sD
istr
ibut
or t
o gr
aphi
c ar
ts, bu
ildin
g, c
oatin
gs, pl
astic
s, a
dhes
ives
mar
kets
Mar
Ger
man
yK
rahn
Che
mie
Gm
bH
Lapi
s M
iner
als
& C
hem
ical
s B
VN
Ln
/an
/aC
hem
ical
sD
istr
ibut
or in
Ben
elux
cou
ntri
es a
nd c
onst
ruct
ion
chem
ical
s
Jan
US
AM
aroo
n G
roup
CN
X D
istr
ibut
ion
Inc
US
An
/an
/aC
hem
ical
sD
istr
ibut
or t
o C
AS
E, pl
astic
s, o
il an
d ga
s, c
hem
ical
pro
cess
ing
indu
stri
es
May
US
AM
aroo
n G
roup
U S
Che
mic
als
LLC
US
An
/an
/aIn
term
edia
tes
Dis
trib
utor
to
CA
SE,
lubr
ican
ts, pl
astic
s an
d as
soci
ated
indu
stri
es
Mar
US
AR
avag
o C
hem
ical
s In
cT
H H
ilson
Co
US
An
/an
/aC
hem
ical
sD
istr
ibut
ion
expe
rtis
e th
roug
hout
Eu
rope
and
into
Mid
dle
E
Mar
Fran
ceS
afic-
Alc
an S
AS
Inte
rpla
st A
ST
R€
25
Mn
/aC
hem
ical
sThe
rmop
last
ics,
rub
ber, c
oatin
gs, ad
hesi
ves,
cos
met
ics,
per
sona
l car
e
Jul
Fran
ceS
afic-
Alc
an S
AS
Rem
aini
ng 5
0%
Safi
c-A
lcan
Nor
dic
AB
SE
n/a
n/a
Che
mic
als
plas
tic, ru
bber
, ad
hesi
ves,
ela
stom
ers,
the
rmop
last
ics
poly
uret
hane
SE
RV
ICE
S
Jan
Sw
itze
rlan
dH
oebi
ger
AG
New
son
Gal
e Lt
dU
Kn
/an
/aS
ervi
ces
Elec
tros
tatic
gro
undi
ng f
or h
azar
dous
are
as
Feb
US
AM
arke
tRes
earc
h.co
m In
cThe
Fre
edon
ia G
roup
US
An/a
n/a
Mar
ket
Res
earc
hIn
dust
ry r
esea
rch
repo
rts
and
cons
ultin
g se
rvic
es
Jul
US
AO
meg
a O
ptic
al In
cR
ugat
e Te
chno
logi
es In
cU
SA
n/a
n/a
Opt
ical
R&
D o
f hi
gh p
erfo
rman
ce o
ptic
al c
oatin
gs a
nd t
hin
film
dev
ices
46 PPCJ • February 2017www.coatingsgroup.com
MERGERS & ACQUISITIONSE
QU
IPM
EN
T
Dec
US
AO
hio
Tran
smis
sion
Cor
pora
tion
C &
C In
dust
rial
Sal
es L
LC
US
An
/an
/aC
oatin
gsS
pray
equ
ipm
ent
inst
alla
tion,
ser
vice
, re
pair
Dec
US
AO
hio
Tran
smis
sion
Cor
pora
tion
Mid
way
Indu
stri
al S
uppl
y In
cU
SA
n/a
n/a
CA
SE
Spr
ay fi
nish
ing,
sea
lant
and
adh
esiv
e ap
plic
atio
n
MA
NU
FA
CT
UR
ER
Dec
Japa
nK
ansa
i Pai
nt C
o Lt
dA
nnag
ab S
ALU
€3
90
M€
57
2M
Indu
stri
al, D
ecor
ativ
eH
oldi
ng c
ompa
ny f
or H
elio
s G
roup
, S
love
nia
Dec
Japa
nN
ippo
n P
aint
Hol
ding
s C
o Lt
dD
unn-
Edw
ards
Cor
pora
tion
US
An
/an
/aD
ecor
ativ
eS
outh
wes
t U
SA
, 13
0 s
tore
s an
d 8
0+
dea
lers
Dec
US
AR
PM
Inte
rnat
iona
l Inc
SP
S B
VN
LU
S$
60
Mn
/aD
ecor
ativ
eFo
r pa
inte
rs, pl
aste
rers
, in
dust
ry, do
-it-
your
selfe
rs
CO
AT
ING
S D
IST
RIB
UT
OR
Dec
US
AU
ni-S
elec
t In
cVa
ncou
ver
Aut
ocol
or L
td a
sset
sC
An
/an
/aR
efini
shA
uto
finis
hes,
pai
nt r
elat
ed p
rodu
cts
and
serv
ices
RM
MA
NU
FA
CT
UR
ER
Dec
Sw
itze
rlan
dA
VALO
N In
dust
ries
AG
AVA
-CO
2 S
chw
eiz
AG
bus
ines
sC
Hn
/an
/aC
hem
ical
sG
loba
l bio
-bas
ed H
ydro
ther
mal
Pro
cess
ing
tech
nolo
gy
Dec
US
AEas
tman
Che
mic
al C
ompa
ny
Rem
aini
ng 5
0%
Te
An
Ling
Tia
n Fi
ne
Che
mic
al C
o Lt
d
CN
n/a
n/a
Add
itive
sA
min
es a
nd s
peci
alit
y de
riva
tives
,
Dec
Ger
man
yEv
onik
Indu
stri
es A
G
J M
Hub
er C
orpo
ratio
n un
itU
SA
€2
82
M€
59
3M
Sili
caTo
str
ateg
ical
ly d
evel
op s
ilica
por
tfol
io
RM
DIS
TR
IBU
TO
R
Dec
Net
herl
ands
IMC
D N
VFe
za K
imya
Ic V
e D
is T
icar
et A
noni
m S
irke
ti T
R€
8M
n/a
Che
mic
als
Coa
tings
, pl
astic
s, r
ubbe
r, lu
bric
ants
, de
terg
ents
Dec
US
AM
aroo
n G
roup
LLC
Cad
ence
Che
mic
al C
orpo
ratio
nU
SA
n/a
n/a
Che
mic
als
CA
SE,
che
mic
al p
roce
ssin
g, w
ater
tre
atm
ent
Dec
Luxe
mbo
urg
Rav
ago
Hol
ding
SA
Pac
ific
Coa
st C
hem
ical
s C
oU
SA
n/a
n/a
Che
mic
als
Food
, be
vera
ge, pe
rson
al c
are,
CA
SE
OT
HE
R
Dec
US
AA
very
Den
niso
n C
orpo
ratio
n H
anita
Coa
tings
RC
A L
tdIL
€47
M€
70
MA
rchi
tect
ural
, A
utom
otiv
eS
peci
alit
y fil
ms
and
lam
inat
es
Dec
Ger
man
yK
nauf
Inte
rnat
iona
l Gm
bH
Com
ex S
A d
e C
V un
itM
XU
S$
30
Mn
/aC
onst
ruct
ion
Pla
ka p
last
erbo
ard
and
cem
ent-
boar
d bu
sine
ss
Dec
Sw
itze
rlan
dS
IKA
AG
Rm
ax O
pera
ting
LLC
US
An
/an
/aC
onst
ruct
ion
Roo
fing
and
wal
l ins
ulat
ion
prod
ucts
AP
PLIC
AT
OR
Dec
US
AM
etoK
ote
Cor
pora
tion
Mal
colm
Ena
mel
lers
AC
P L
tdU
Kn
/an
/aA
pplic
ator
Ecoa
ting
for
auto
mot
ive
OEM
, ag
ricu
ltura
l and
indu
stri
al m
arke
ts
Dec
US
AO
rchi
d O
rtho
pedi
c S
olut
ions
Ore
gon
Inc
Cam
Bio
cera
mic
s B
V C
am C
hina
uni
tC
Nn
/an
/aM
edic
alA
pplic
atio
n of
hyd
roxy
lapa
tite
(HA
) pla
sma
coat
ings
MA
NU
FA
CT
UR
ER
Nov
Indi
aB
NB
Coa
tings
Indi
a Lt
dB
erge
r P
aint
s In
dia
Ltd
unit
INn
/an
/aA
utom
otiv
eThr
ee-
and
four
-whe
eler
pla
stic
coa
tings
bus
ines
s of
Nip
pon
and
Ber
ger
Nov
Ger
man
yG
rebe
Hol
ding
Gm
bH
Con
dor-
Coa
ting
Gm
bH
sta
keD
En
/an
/aP
last
icFo
r au
tom
otiv
e O
EM
, co
smet
ic a
nd d
omes
tic a
pplia
nce
indu
stri
es
Dec
UK
Mon
di p
lcTe
rmin
atio
n of
agr
eem
ent
to b
uy W
alki
Oy
FIn
/a€
60
MP
acka
ging
No
wor
kabl
e so
lutio
n to
con
cern
s re
latin
g to
com
petit
ive
envi
ronm
ent
RM
MA
NU
FA
CT
UR
ER
Dec
US
AG
abri
el P
erfo
rman
ce P
rodu
cts
LLC
BA
SF
Cor
p tr
adem
ark
US
An
/an
/aC
hem
ical
sVe
rsam
id p
olya
mid
e cu
ring
age
nts
for
2K s
olve
ntbo
rne
epox
ies
Dec
Spa
inIQ
OX
E C
elan
ese
Cor
pora
tion
unit
ES
n/a
n/a
Res
in2
5,0
00
mt
capa
city
atm
osph
eric
(vi
nyl a
nd a
cryl
ics)
em
ulsi
ons
unit
Dec
US
AJ
M H
uber
Cor
pM
artin
swer
k G
mbh
DE
n/a
n/a
Add
itive
sM
iner
al fl
ame
reta
rdan
ts a
nd s
peci
alit
y ch
emic
als
busi
ness
es
Dec
US
AJ
M H
uber
Cor
p5
0%
MA
GN
IFIN
Mag
nesi
apro
dukt
e G
mbH
AT
n/a
n/a
Che
mic
als
JV a
t B
reite
nau,
Aus
tria
, w
hich
pro
duce
s m
agne
sium
hyd
roxi
de
Dec
US
AThe
Dow
Che
mic
al C
oThe
Che
mou
rs C
ompa
ny L
LC u
nit
US
An
/aU
S$
140
MC
hem
ical
sA
nilin
e fa
cilit
y in
Bea
umon
t, T
X
Dec
US
AThe
Dow
Che
mic
al C
oM
erge
r w
ith D
uP
ont
US
An
/an
/aP
igm
ents
, R
esin
sTo
for
m U
S$
130
bn A
gric
ultu
re C
o, M
ater
ial S
cien
ce C
o an
d S
pec
ialt
y
Pro
duct
s C
o
Dec
US
AThe
Dow
Che
mic
al C
oR
emai
ning
50
% o
f D
ow C
orni
ng C
orp
US
An
/an
/aR
esin
sO
ne o
f th
e gl
obal
lead
ers
in s
ilico
nes
and
silic
on-b
ased
tec
hnol
ogy
Defi
niti
on:
Wo
rld
wid
e M
erg
ers
and
Acq
uisi
tio
ns d
atab
ase
cove
rs p
ublic
and
pri
vate
tra
nsac
tio
ns in
volv
ing
at le
ast
a 5%
ow
ners
hip
of t
he c
om
pan
y. T
rans
acti
ons
incl
ude
M&
A, s
tock
sw
aps,
LB
Os,
sp
ino
ffs,
etc
* From 2015; ** From 2014
47 PPCJ • February 2017www.coatingsgroup.com
PROTECTIVE COATINGS
Being committed to localised
manufacturing, AkzoNobel, world
leader in performance coatings
technology and innovation, now produces
its new passive fire protection product (PFP)
Chartek® 2218 in Dammam, Saudi Arabia.
The new Chartek 2218 is the latest addition
to the list of innovative solutions produced
by the AkzoNobel Dammam production
facility, which now is able to manufacture
the entire Chartek product range.
Chartek, the world’s most complete
range of epoxy intumescent passive fire
protection coatings, was first introduced
in the 1970s and serves as the first choice
for passive fire protection, especially within
the oil and gas industry worldwide, due to
its safety, durability and efficiency. Used
by all of the world’s oil majors, it has been
proven in-service in regions as diverse as
the North Sea, the Arctic and the tropics,
demonstrating AkzoNobel’s heritage and
track record in safety.
ONSHORE PROJECTSThe all-new Chartek epoxy passive fire
protection product is aimed at onshore
oil, gas and chemical projects, all sectors
where the Middle East and North Africa
region hold significant importance.
An ideal fit to the region’s oil and
gas sector, Chartek 2218 helps achieve
significant cost savings through its
simplified installation and unique rapid cure
properties. It also allows for an increase
on steel throughput of up to 300%/day
compared to cementitious passive fire
protection products and 50% compared to
any other epoxy PFP; translating into huge
savings for customers.
Chartek 2218 has a simplified installation
process with the introduction of a new
reinforcement solution in Charlok clips.
This enables faster application and
improved production rates with up to two
hours fire duration possible in a single
coat application.
Unique rapid cure speed means that
multi-coat application times are also
reduced. This product also provides
protection from the effects of jet fire for
up to two hours and pool fire for up to
four hours.
COST SAVINGSThe oil price volatility has resulted in cost
cuttings throughout the oil and gas sector.
AkzoNobel supports these cost saving
efforts through launching new products,
such as Chartek 2218, which helps
customers to achieve unprecedented levels
of savings. “At a time where cost savings
are paramount in the oil and gas industry,
Chartek 2218 addressed many areas where
our customers look for savings”, says
Gary Chapman, Fire Protection Segment
Manager. “Delivering a durable PFP coating
for site or shop application, alongside the
ability to achieve faster project completion
at minimal overall cost, was our goal
when developing Chartek 2218.” Even
at low temperatures, faster application
and improved production rates can be
achieved, which contribute to reduced
overall costs compared to other epoxy
passive fire protection alternatives.
The manufacturing of the Chartek 2218
PFP coatings in Saudi Arabia is clear
testament to AkzoNobel’s commitment to
building localised manufacturing. Nearly
60% of AkzoNobel’s products are used
in buildings, infrastructure and transport.
“Driving localised manufacturing helps us
to identify the real needs of our customers
in the region and offer innovative solutions
that meet their requirements”, explains
Andrea Meconcelli, Director of Performance
Coatings, AkzoNobel Middle East.
The plant in Dammam has UL
classification in place to support the
manufacturing of Chartek 2218 in the
region, enabling the company to also
reduce supply lead times. The successful
localisation of this technology and being
closer to the customers, strengthens
AkzoNobel’s local supply chain capabilities
and customer focus. Such a localisation
initiative is defining the company’s
operations in the Middle East and the North
Africa region, and is another landmark
in the ambition to bring AkzoNobel’s
innovative and local technology to
the region.
The decision to manufacture the product
locally signifies AkzoNobel’s commitment
to the Middle East. It provides potential
for operational efficiencies especially for
customers looking for opportunities to
make cost savings due to oil price volatility.
“While the oil price volatility has reportedly
led to cuts in new infrastructure, we see
AkzoNobel’s epoxy intumescent passive fire protection coating, Chartek, is now being produced
in Dammam, with its latest addition to the range suitable for the oil and gas sector
Chartek manufacturing localised in Saudi Arabia
Application of AkzoNobel Chartek protective coatings
48 PPCJ • February 2017www.coatingsgroup.com
PROTECTIVE COATINGS
the industry focusing further on enhancing
their efficiencies. The challenges are more
relevant on the industry stakeholder’s ability
to invest in upkeep and new solutions
that contribute to higher efficiency”, says
Andrea Meconcelli.
Creating local manufacturing
also indicates commitment to the
Saudi Vision 2030, announced by
the Kingdom to promote localised
innovation, manufacturing and economic
diversification. AkzoNobel, already active
in Dammam for years, brings innovation
to the region and has widened its range
of local manufacturing, making it one of
the regional leaders in hiring local talent
and skills.
Keeping an eye on the future and
working in partnership with customers
and key stakeholders, AkzoNobel makes
the world more liveable and inspiring.
AkzoNobel is dedicated to remain as a
frontrunner in sustainability, its focus has
moved towards sustainable products,
features and even projects. “The Middle
East is a fast growing region that not
only offers opportunities for business but
also ensures that companies adopt and
follow a strict sustainability agenda. For
example, the UAE Government wants to
ensure sustainable development, while
preserving the environment and to achieve
a perfect balance between economic
and social development. We see a strong
growth opportunity to support the region’s
commitment to promoting sustainable
development”, says Andrea Meconcelli.
HUMAN CITIES INITIATIVEConsistently ranked as one of the global
leaders in sustainability, AkzoNobel
is dedicated to energising cities and
communities, while creating a protected,
colourful world where life is improved.
This is underpinned by AkzoNobel’s
‘Human Cities’ initiative, which is led by
sustainability as a key pillar. Human Cities
is derived from the company’s commitment
to support urban environments to cope
with the common set of challenges, such
as demands from a fast-growing population
for energy and water, and concerns about
climate change.
AkzoNobel can play a major role in this
as more than 60% of its products are used
in buildings, infrastructure and transport.
Through its Human Cities manifesto,
AkzoNobel aims to create more ‘human’
urban environments by making cities come
alive, enabling people to make more of an
emotional connection with where they live.
PPCJ
Author: Chris Hoy, Communications Manager, Protective Coatings AkzoNobelStoneygate Lane, Felling NE10 0JY, UKTel: +44 191 401 2528Email: [email protected]: www.akzonobel.comhttp://www.international-pc.com/products/fire-protection/Chartek
M&A Global Review 2016 updateThe month of December and the year
end saw the announcement of 15 deals,
bringing the total for the year to a record
139 transactions, by far the largest
number since this review began eight
years ago.
Included was the already made stop-press
announcement of Kansai taking over the Helios
group of Slovenia. Not to be outdone, arch
rival Japan-based Nippon gave notice of its
acquisition of Dunn-Edwards Corporation, one
of the USA’s largest independent decorative
manufacturers, bringing a platform for growth
with its 130 stores and 80+ dealerships.
RPM squeezed in its eighth deal of 2016,
agreeing to buy the US$60M Dutch SPS
Group with a complete line of architectural,
industrial and high performance paints
sold through large home centre chains and
builders merchants in The Netherlands.
But the most interesting eleventh
hour report of a possible future, yet to
be agreed, deal was that of Nippon Paint
Holdings intending to take ownership of the
remaining 49% of its eight subsidiaries in
China, Malaysia and other Asian countries
from Singapore's Wuthelam Group,
Nippon's biggest shareholder with a 40%
holding. Nippon is said to be targeting third
place or higher in the market in Europe and
the Americas, China and throughout the
rest of Asia.
Here endeth a titanic year for mergers
and acquisitions in the coatings industry –
at least until the next time.
PPCJ
Tall column fire test
PROTECTIVE COATINGS
49 PPCJ • February 2017www.coatingsgroup.com
Micaceous iron oxide (MIO) is one of
the most used functional pigments
to make protective coatings. Maybe
the most illustrious example of using MIO
in protective coatings is the Eiffel Tower in
Paris, opened in 1889.
From a chemical-mineralogical
perspective, MIO is a hematite-based
pigment (a-Fe2O
3), whose particles are mainly
shaped mica-like lamellar (aluminium silicate),
hence the name. The ISO 10601 standard
sets the basic criteria for the quality of MIO-
based products: high content of lamellar
particles (min. 65% for type A), minimum
Fe2O
3 content of 85% and a maximum grade
distribution of 0.1% at >105μm.
Some characteristics of MIO are:
• High lamellarity allowing for the
formation of a barrier against weather
and environmental agents;
• Insolubility in water, organic solvents
and alkali;
• Excellent UV stability;
• Resistance to high temperatures;
• High anti-corrosive power;
• High resistance to chemicals;
• Low content of soluble substances;
• Suitable both for water systems and for
solvent systems;
• Non-toxic;
• Non-oxidising and non-flammable.
In general, thicker particle grades offer a
shiny decorative effect as a valid low-cost
alternative to pigments with special effects,
ensuring a reduction in the specific surface
area/oil absorption ratio. Thinner particle
grades, thanks to a larger specific surface
area, allow for a reduction in MIO content
in the formulation and allow for a thickness
reduction of the applied film.
Decorative coating From a decorative perspective the flat
surface of the MIO particles acts as a
mirror, giving the application a metallic
shine with a satin finish. MIO is typically
grey, limiting the colour range of the
finished product. Below, a colour card was
developed for micaceous iron paint.
Protective coating MIO-based finishes are used in settings
where long-term protection is essential.
During application, the MIO lamellar
particles orient themselves in parallel to
the film of paint, thus creating a barrier
effect against the influence of UV rays.
The barrier effect, which is obtained with
layers of paint at least 100 dry μm thick,
prevents oxygen, water, organic solvents
and alkali from being absorbed through the
film of product, thus increasing its anti-
corrosive characteristics.
It is known that the MIO content and
the value of PVC affect the anti-corrosive
properties of the coating. The anti-corrosive
effect initially increases by PVC values
of 40-50% and then decreases to PVC
values between 55 and 60%. The best
compromise is reached by such coatings
whose PVC value comes at around 50%.
Ferroxid micaceous iron oxide The series of MIOs – Ferroxid – are
characterised by a high chemical purity
and a high content of Fe2O
3. The low
content of electrolytes and soluble
substances present in the MIO guarantees
excellent performances in all corrosion
protection applications.
The morphology of Ferroxid MIO is
characterised by lamellar-shaped particles,
whose surface size ranges from 1x1 to
1x3, and whose thickness varies between 1/
6 and 1/
20 of the maximum length. These
morphological properties confirm the high
lamellar properties of the products.
It is possible to choose from Ferroxid
R63 (thin structure), Ferroxid R88
(medium structure) or Ferroxid R120
(thick structure) depending on the final
properties of the coating. PPCJ
Dr Filippo Busolo, Nuova EuroColori srl, looks at how micaceous iron oxide can provide a special
decorative and protective coating, as well as show anti-corrosive characteristics
A unique pigment for decorative and protective coating
Product Quantity, % m/m
Acrylic-styrene dispersion 50.0
Water 7.5
Butyl glicol 2.0
White spirit 2.0
Antifoam 0.6
Wetting and dispersing additives
0.7
Ferroxid R63 – R88 - R120
32.0
Filler or Pigment (eg Pigment red PJ 130)
5.0
NH4OH conc. 0.2
Properties
PVC, % 49
pH 9.5
Viscosity, Krebs Unit 75-85
Starting point formulation
Fig 1. Example of colour card developed for micaceous iron paintFig 2. Chart of the barrier effect offered by MIO-based coatings
Author: Dr Filippo Busolo, Nuova EuroColori srl Website: www.eurocolori.com
50 PPCJ • February 2017www.coatingsgroup.com
AUTOMOTIVE REFINISH
Colorvation is definitely a word we
are going to hear a lot more of over
the coming months and years. It is
a logical and inevitable development in the
vehicle refinishing sector, which removes
visual subjectivity from the colour selection
and matching processes and replaces it
with consistent, accurate results.
At last month’s press briefing at
AkzoNobel’s Automotive Training Centre
in Didcot, UK, George Sneddon, Regional
Technical Service Manager, Europe North,
Akzo Nobel Coatings Ltd and Jon Amor,
VR Premium Sales Manager UK & Ireland,
Akzo Nobel Coatings Ltd, took us through
its development and gave a hands-on
demonstration of how user-friendly, quick
and accurate it is to use.
For nearly half a century, AkzoNobel
has been developing the industry’s leading
digital colour techniques and technologies,
and continuously reinventing for the future.
Building on its Automatchic™ and
MIXIT™ tools, the company is now able to
offer a portfolio that harnesses the power
of digital colour technology, to benefit
business and help to achieve measurable
improvements – greater accuracy,
greater efficiency and ultimately, greater
profitability. Ultimately, a body shop will be
able to ‘measure, mix and spray’, cutting
out the need for constant checking. As
George explained: “An OEM facility has
a choice in excess of 1800 pigments. A
bodyshop has approximately 74 toners”.
WHAT IS AUTOMATCHIC?
Automatchic was first launched in 1993
and has since become AkzoNobel’s
pioneering hand-held spectrophotometer.
In its current form, in combination with
its extensive database, it is claimed to
be the most accurate colour-matching
system available.
Its high degree of accuracy dramatically
reduces the likelihood of matching errors
and eliminates the need to carry out re-
works. In some cases, users report an
average reduction of up to 20% in overall
paint use after adopting Colorvation and its
digital colour tooling.
Every aspect of Automatchic has
been designed for convenience. The
device is compact, weighing only
460g, easy to handle and operate and
requires minimal training. Producing one
conclusive colour measurement after
just two quick readings. To streamline
workflow, Automatchic is Wi-Fi enabled.
After reading the colour at any location
in a bodyshop, it sends measurements
directly to the MIXIT software on a PC,
saving time and maintaining consistent and
accurate results.
MIXIT: A TURNING POINT FOR THE INDUSTRY?
MIXIT, AkzoNobel’s advanced colour
identification and retrieval application
represents a turning point for the industry.
Through MIXIT, users have direct,
immediate access to its vast database,
which hosts more than two million colours
and variants – with more being added every
day. MIXIT uses a cloud-based system
and can be easily accessed from any
Chris Malthouse reports on the UK launch of AkzoNobel’s unique approach to vehicle refinishing
Colorvation: A digital way of working from AkzoNobel
Readings are sent directly to the MIXIT softwareTaking readings using the Automatchic
spectrophotometer
52 PPCJ • February 2017www.coatingsgroup.com
AUTOMOTIVE REFINISH
device or platform. Driven by sophisticated
algorithms, MIXIT is capable of delivering
fast and accurate search results and
is continuously being updated with
new features.
Eventually, the ubiquitous colour chip,
which has been the stalwart of the vehicle
refinishing industry for decades, will be
phased out.
George explained: “Colour libraries are
a huge untapped resource”. Now every
time a colour measurement is taken, the
information will be added to the database.
It doesn’t matter what make or how
exclusive the vehicle is, where in the world
or even how old. Previously between eight
to nine thousand cars had to be produced
in the market to warrant producing specific
colour chips.
HOW WILL BODYSHOPS BENEFIT FROM DIGITAL COLOUR MATCHING?
Many users around the world are already
discovering what Colorvation can achieve
for their businesses. Incorporating its state-
of-the-art digital tools into how they work
has helped produce outstanding results.
Moving to a digital platform means fewer
errors and reduced cycle time, leading to
a consequent reduction in costs and an
increase in the potential number of vehicles
going through a bodyshop. This is good
news for customers, for reputation and
for profitability. Colorvation makes digital
colour easy, accessible and it is backed by
AkzoNobel’s full commitment and support
from start to finish.
“As partners to our customers we want
to equip them with the power of digital
technology to transform the way they work,”
explained Peter Tomlinson, Managing
Director of AkzoNobel’s Vehicle Refinishes
business. “We are reducing the cost
and complexity of colour matching. Our
converted partners are proof that digital is
the way forward and with the continuing
innovation of Automatchic, MIXIT and other
digital tools, this is just the beginning.”
“Cycle time is huge in our industry….
knowing that when our painter uses the
digital camera, that we are going to get
the right colour match the first time, that is
huge. It saves us a ton of time and money”,
reported Jason Matthews, Matthews Motor
Company, based in Covington, USA.
“The whole system is fast and a
joy to work with. Automatchic Vision
is an amazing piece of technology – it
enhances the skill of the user and we’ve
seen significant benefits, such as higher
production, reduced rework and increased
customer satisfaction.
“Where necessary, you can even
improve the match by doing a spray out
and taking a correction measurement.
This is a real ‘game changer’ saving an
enormous amount of time and money that
would have been spent tinting”, said Eric
Boast, Vehicle Accident Repair Centre
(VARC), Kent, UK.
Colorvation is being rolled out globally
and full functionality is scheduled for 2018.
www.colorvation.com PPCJ
Axalta spectrophotometers help refinish professionals achieve excellent colour matchAxalta Coating Systems recently
celebrated the sale of its 40,000th
spectrophotometer at the Specialty
Equipment Market Association tradeshow
in Las Vegas, Nevada, USA, where
Mike Carr, Axalta President – North
America and Michael Gogoel, BYK-
Gardner USA President, unveiled a
commemorative spectrophotometer.
BYK-Gardner, a global leader in the field
of measuring colour and appearance
and testing physical properties of plastic,
coatings and cosmetics, manufactures
Axalta’s spectrophotometers.
As a leader in colour matching
technology, Axalta pioneered the
development of portable colorimeters and
then spectrophotometers, and was the first
in the industry, in 2011, to offer a device that
measures colour and flake appearance.
In Europe, the Middle East and Africa
(EMEA), today’s spectrophotometers
are available from each of Axalta’s three
premium global refinish brands – Cromax,
Spies Hecker and Standox. The devices
are branded as ChromaVision and
ChromaVision Pro from Cromax, Color
Dialog and Color Dialog Delta-Scan from
Spies Hecker and Genius II and Genius
iQ from Standox. The cutting-edge
spectrophotometers are also available
globally to Axalta’s bodyshop customers
as part of its extensive colour tool choices.
They are sold in the USA and Asia Pacific
under the names Acquire and Acquire
Plus EFX.
Dr Martin Wulf, Colour Marketing
Manager for Axalta Refinish Systems in
EMEA, says:, “The devices are designed
to help refinishers get the right colour
match the first time by eliminating costly
mistakes and by speeding up the repair
process. The patented technology quickly
identifies the paint colour and users of the
second-generation devices will also get the
details of any paint effects. Then, the colour
software selects the closest colour formula
to match, based on pre-set search criteria,
making the entire process quick, easy
and effortless”.
Carr concludes: “It is a milestone to have
Axalta’s 40,000th spectrophotometer in the
marketplace. It truly is a compliment that
so many bodyshops realise the benefits
of this device. Customers appreciate tools
that help them get the job done efficiently,
quickly and accurately. We are proud to
offer this solution to the market and look
forward to its continued growth”.
www. axaltacoatingsystems.com
SECTION REPORT
53 PPCJ • February 2017www.coatingsgroup.com
COUNTRY FOCUS
UAE paint sector still robustLow oil prices, though, leaves the UAE relying more on maintenance than new builds, as Paul Cochrane reports
The United Arab Emirates (UAE) has
managed to ride out the economic
and political instability that has
afflicted much of the Middle East since the
onset of the Arab Spring but low oil prices
have impacted the paint sector, with fewer
mega developments and infrastructure
projects in the pipeline than several years
ago. Government budgets have also been
tightened, real estate prices have dropped
and payment terms are tough, making for
a challenging operating environment for
coatings companies.
“The paint sector is at a standstill, in
fact it dipped a little in 2016 on 2015. The
figures are pretty much static”, said Sunil
Gudur, General Manager of Al Gurg Paints,
which manufactures its own brand, Oasis,
in the UAE Emirate of Sharjah.
It is a sentiment reflected by Bassam
Bizri, General Manager of Chemipaint,
which has a 15,000m2 factory in Abu
Dhabi. “In 2016 there was no growth in the
sector but it didn’t decline. We pulled out
of certain projects due to payment issues”,
he said.
While the UAE is a manufacturing
hub for many international and regional
paint companies, exporting to the rest of
the Middle East, Africa and central Asia,
the local market is estimated at Emirati
Dirham AED1bn (US$272.2M), according
to Gudur. With the UAE heavily dependent
on hydrocarbon sales to drive economic
growth and balance budgets, the paint
sector has been impacted by the low global
oil price, which dropped from more than
US$100 a barrel in 2014, to US$28.94 in
early 2016. Economic growth in the UAE
was 4% in 2015 but was estimated at 2.3%
in 2016, according to the International
Monetary Fund (IMF). The country remains
wealthy, however, with US$43,090 gross
national income per capita in 2015,
according to World Bank statistics.
JOB CUTS AFFECTING ECONOMY
The economy has been further impacted
due to job cuts in the government, energy
and financial services sectors, according to
international real estate services provider
JLL (Jones Lang LaSalle). As a result,
property sales prices in Dubai as of end
2016, had dropped by 15% since 2014
and rents had dropped by 10%, according
to JLL.
The number of housing units built has
also dropped, with the average in the past
10 years being 21,000/yr but discounting
exceptional growth in 2007-8, the average
annual completions have been around
15,000 units, according to commercial real
estate services firm CBRE.
The recent rise in oil prices in the back
end of 2015, to US$60 a barrel, has not
resulted in a flurry of new real estate
projects or infrastructure developments,
however. “Even if the price goes up to
US$70 [a barrel], the [UAE] governments
are now cautious and will not immediately
start spending money. Only necessary
projects may start”, said Bizri.
Abu Dhabi, the federal capital and
accounting for 87% of the UAE’s landmass,
has been impacted more than the Emirate
of Dubai (the UAE’s most populous unit),
which has diversified its economy to a
much greater degree. Paint prices have
dropped in Abu Dhabi compared to Dubai.
“The square metre we take in Abu Dhabi for
say AED8 [US$2.17], in Dubai we take for
AED10 [US$2.72]”, said Bizri.
His company has had major issues with
payments in Abu Dhabi so has shifted
towards the Dubai market. “A year ago
60-70% of our sales were in Abu Dhabi
but now it is 80% in Dubai. We lost a big
share [of our sales] in the Abu Dhabi market
but compensated from Dubai, so we are
trying to shift sales there, especially as
they’re paying.”
Payment issues have been a problem
across the UAE. “If you are operating a
standard 90 days’ payment time, it is then
extended to 120 days and now buyers are
openly saying, are you able to work on 180
days?” said Gudur.
Payment terms are particularly important
in the UAE as the majority of sales are
on a project basis, not in retail, with
contractors doing the painting on new
projects or for maintenance. Indeed, at
present, it is maintenance projects that are
keeping the sector afloat: “Maintenance
projects are always going on, especially
as, unfortunately, high quality paint is not
always used, so maintenance is yearly or
every few years”, said Bizri.
The sector has also been squeezed by
new market entrants undercutting prices.
“Compared to a few years ago, customers
want a 20-30% discount on prices. One
reason for this is a new paint brand trying
to get a toe hold, not a foot hold, in the
market so has dropped prices like crazy.
If someone offers such a low price, it
is impossible to survive due to the low
margins”, said Gudur.
In the current environment, few paint
companies are developing and releasing
new products on to the market. “We have
reached a state in the global economy
where only companies with courage want
to try something new as the margins are
compressed; a few losses and all margins
are wiped out”, added Gudur.
SELECTIVE PROJECTS
To adapt to the new operating environment,
paint companies are being more selective
in what projects they take on, as well as
being more Dubai focused. “We are trying
to filter our customers and some projects
we pulled out of as we were not getting
paid. The other Emirati markets [of Sharjah,
Fujairah, Ras Al Khaimah, Umm al-Quwain
and Ajman] from the beginning were not
very active and we are not interested in
them. Dubai is the most promising market
for the time being”, said Bizri.
Al Gurg has expanded its decorative
coatings range and started a supplier
division to undertake painting projects on a
smaller scale than large villa and mega-
UAE
“A year ago 60-70% of our sales were in Abu
Dhabi but now it is 80% in Dubai. We lost a big share in the Abu Dhabi market but compensated from Dubai, so we are trying to shift sales there ...
”
SECTION REPORT
54 PPCJ • February 2017www.coatingsgroup.com
COUNTRY FOCUS
projects. “Instead of running after mega
projects of 40 storey buildings or 200 villas,
we are now focusing more on premium
projects – high-end apartments, pubs,
restaurants – as instead of a high value
base of say AED4M [US$1M] in one shot
it is a few hundred thousand dirhams here
and there, with the project executed in 10
days so we can move on to the next one”,
said Gudur.
Big projects are nonetheless still under
way, such as mix-used developments
Dubai Creek Harbour, Dubai South and
Dubai Water Canal. But such projects are
“not very paint heavy orientated projects”,
added Gudur.
Manufacturers and the construction
sector are anticipating a rise in demand
in the lead up to the Dubai 2020 World
Expo, although few projects have been
tendered. “The 2020 Expo is presumed to
be a centrepiece of construction to get the
sector kick started but it is still premature,
as why invest three or four years in
advance?” said Gudur. “My guess is we
will see a fair bit of activity taking place all
over again in 2018 and for there to be more
emphasis on the 2020 Expo.”
According to international integrated
project and programme management
consultancy firm Faithful+Gould, the UAE’s
construction sector is forecast to grow 4%
in 2017, with US$45bn in contracts to be
awarded this year, although delivery times
will be longer than in the recent past. CBRE
estimates that 70,000 housing units are
projected to be developed for delivery in
Dubai between 2017 and 2019.
PPCJ
For more information, contact: www.internationalnewsservices.com
Flint Group and Dynagraph add colour to the Middle East and AfricaDynagraph, the oldest operating reseller of
printing equipment, supplies and services
in the Middle East, a pioneer in the industry
and a key partner for Flint Group, has
opened a new sheetfed spot colour mixing
facility in Al Quoz Industrial Area, Dubai.
Distributors of sheetfed and web offset inks
for Flint Group for nine years, Dynagraph
has a reputation for technical expertise
and service excellence. Now customers
in the region can expect the same high
quality service from the new colour
mixing laboratory.
Antoine El Kara, Managing Director of
Dynagraph, is very enthusiastic about this
latest strengthening of the partnership with
Flint Group. Mr El Kara commented: “We
take great pride in the inauguration, with
Flint Group, of the first offset ink mixing
shop in the Middle East region. This service
answers a growing demand for special
colours with short delivery times and has
a yearly production capacity of around
150-200t. The reason for the company‘s
longevity and success lies in our proximity
to the market, where we maintain an
impressive and much envied sales, service
and logistic network of subsidiaries and
branch offices. This new venture into
sheetfed spot colour production only
enhances our product range, technical
capabilities and market footprint.”
Working alongside Dynagraph on this
spot colour mixing project in the Middle
East is a key building block of Flint Group’s
service strategy, focusing on creating
a consistent, high quality and reliable
partnership with end user customers
globally. This is especially important to
packaging printers working with large
brand owners who must be able to faithfully
reproduce a wide variety of customers’
house colours, regardless of substrate or
production deadlines.
“We realised some time ago that the
Middle East region was in need of a
high quality spot colour mixing service”,
said Steven Haig, Flint Group’s Sheetfed
Sales Director for the region. “So we
began discussions with Dynagraph at the
beginning of 2015 and it’s very pleasing to
now see this project finally come to fruition.
We have every confidence in Antoine and
the team’s ability to deliver the highest
quality mixes to printers across the Middle
East, time after time.”
At the heart of the fully automated
system is a Vale Tech HP35 ink dispenser,
which accurately measures out each
base colour according to pre-determined
recipes. A Color-Mix Jet Mixer then
perfectly blends those dispensed base
colours and Teknimek proofers help the
operators to ensure the shade is correct.
X-Rite Spectrophotometers measure the
original colour shade to help specify the
correct ink formula to programme the Vale
Tech computer. As part of the partnership
agreement, Flint Group technicians will
support Dynagraph through the installation
and start-up phase, to provide training,
guidance and advice.
In addition to this, Dynagraph will be
linked to Flint Group’s Global Colour
Centre in Poland, which provides a
web-based automated colour matching
solution. The system consists of a
dedicated, managed internet production
server running X-Rite Ink Formulation
software in which colourant files for widely
used ink systems and substrates have
been installed. It is designed to reduce
costs and, at the same time, improve the
efficiency and accuracy of colour matching
done at remote locations.
56 PPCJ • February 2017www.coatingsgroup.com
COMPANY PROFILE
DIA33 is a multi-national chemical
distribution company, having a
leading position in the MEA and
Far East regions. It provides a vast
range of products along with smart
solutions to multiple chemical industries
and applications.
“Our enduring relationships that we have
built over the years with our supply chain
partners, valued customers, committed
workforce and by adopting a strategic
approach to marketing, have enabled us to
offer tailor-made solutions to our customers.
We take pride in our Product Development
Team and their continuing endeavour to
remain innovative in products, solutions,
logistics and market developments”, said
Group CEO, Mr Nadeem Raza.
DIA33 offers a comprehensive portfolio
of basic and speciality chemical raw
materials for a wide range of applications,
such as paints, coatings, construction,
plastics, lubricant etc. The company
recently diversified with the addition of a
range of products, including polyolefins and
metal finishing solutions.
MARKET DEMANDS MET
As a distribution company, with offices
covering 12 countries, it provides a high
degree of flexibility and speed to react to
market changes.
“DIA33 has diversified its activities with
its wide geographic presence. It advances
the development of the business by
reliably perceiving the potential in different
regions. With its new focus in sub-Sahara
and central Africa, DIA33 has made well-
thought investments into new infrastructure
and joint ventures in the fastest developing
sub-area on the mainland and we foresee
a continuous surge in demand for coatings,
construction, adhesives and many other
chemical applications. Global coating
manufacturers, chemical raw materials
suppliers and related service providers
are planning to build on their exposure in
East African countries. DIA33 sees great
opportunities now and in the future, in
this region and has a definite blueprint
to enhance its presence further”, said
Manager – Strategic Planning and Business
Development, Taha Talib.
“Upgrading software, filtering core and
non-core functions, finding better ways to
get supplies and distribute products, doing
so we are enhancing our services further,
such as on-time delivery, technical support,
toll manufacturing etc, which are often
required by our customers”, said Director-
Product Development & Technical Support,
Madiha Naz.
PRIDE IN ITS PRODUCTS
DIA33 endeavours to provide its customers
with superior products and services, and
access to technologies and formulation
solutions that drive the development of
innovative products that meet consumer
and market demands. The company has
formed partnerships with world renowned
speciality producers, thus, making an
attractive coatings and construction
portfolio. “As a provider and distributor
of speciality chemicals raw material for
adhesives, paints and coating chemicals
and others, we are proud to work with
the world’s driving manufacturers of
specialised raw materials/chemicals to
bring the right materials and best solution
to our customers. In 2016 third quarter,
we added many speciality additives to our
product basket. Our expertise implies the
additive supplied is fitting for its intended
use, will additionally improve the product’s
functionality, execution and value.
“Coating developers, paint and plaster
experts require a broad selection of
facilitated materials, keeping in mind the
end goal to furnish their clients with ideal
products. Binders, emulsions, surfactants,
surface additives, wetting
and dispersing agents,
rheological modifiers,
emulsifiers, preservatives,
hydrophobic additives,
waxes, pigments, functional
fillers, are a portion of the
extensive range of speciality
chemicals (raw materials)
that DIA33 has and each of these specialities
complement the final product without any
doubt”, Madiha adds.
EXCLUSIVITY AND SUSTAINABILITY
DIA33 holds exclusive partnerships
with more than 35 renowned global
manufacturers and works closely with
in excess of 85 non-exclusive suppliers
for products under OEM agreements to
support and cater for its highly valued
customers at any time.
“We are dedicated to provide solutions
for our clients, based on their particular
needs and applications, and have been
developing and growing our expertise
in all business segments. These include
focusing on where to compete and avoid
the ‘one size fits all’ approach; studying and
observing local market demands to ensure
that client ideas and requirements are taken
care of and converted into market-specific
product development; keeping costs
competitive and modify supply chains to
adjust to fast efficiency”, stated Mr Raza.
“Rising above traditional models, we
have adopted advanced supply chain and
inventory strategies. Furthermore, we are
working on bringing digital changes to
our company’s performance and agility,
customer interface, innovations and
organisation”, said Group CFO, Abu Saad.
DIA33 works closely with green
products, like biodegradable plastics,
green-seal based additives, VOC-free
products etc, to make the world a better
place for future generations. PPCJ
Dubai-based DIA33 has an enviable relationship, built up over the years, with its supply chain partners and customers
Product portfolio for a diverse range of applications
DIA33 team
Contact: DIA33 Website: www.dia33.com
CLASSIFIED ADVERTISING
CHANGZHOU NORTH AMER ICANCHEM ICALS GROUP CO. , LTD.CHAN G ZHOU SUN KEE CHEM ICALS CO.,LTD.
ADD: RM .1001,CHUN YUAN BUILD-IN G ,N O.101,JUQIAN
STREET,CHAN G ZHOU,JIAN G SU,CHIN A 213003TEL: 86 519 86602669 FAX: 86 519 86627700
E-mail:M SN : [email protected]
60000M T PRODUCTION CAPACITYORGAN IC YELLOW, RED, ORANG E, BLUE,
GREEN , AND VIOLET PIGM EN T.
twitter.com/CoatingsGroup
facebook.com/ TheCoatingsGroup/
Search “The Coatings Group”
in LinkedIn
There are now more ways than ever to follow the latest news and trends from the team
Tel:+ 90 (262) 722 92 55Fax: +90 (262) 722 92 65E-mail: [email protected]
KOCAELİ / TURKEY
ULTIMATE MIXING TECHNOLOGY
www.sozer.com
Pigments Pigments Pigments
Test Equipment Plant & Machinery
Plant & Machinery Pigments
SECTION REPORT
58 PPCJ • February 2017www.coatingsgroup.com
PRODUCT NEWS
IN BRIEFPocket guide – Loctite solutions offeredLoctite products offer
maintenance experts a
range of solutions to keep
plant and operations
running smoothly with
less interruption and to
support their effort, Henkel
has produced an updated
Maintenance Expert Guide.
This easy to use, pocket-
sized guide offers quick
reference via product
category, such as structural
bonding, cleaning,
lubrication and anti-seize.
www.loctite.co.uk
Anton Paar expands viscometer seriesThe SVM series of
viscometers from Anton
Paar has been expanded
with the SVM 4001
Stabinger Viscometer. It has
a double-cell system for
viscosity measurements at
two different temperatures
simultaneously, providing
the fastest Viscosity Index
determination from the
lowest sample volume.
The double-cell design
of the SVM 4001
allows for simultaneous
measurements at 40°C
and 100°C.
www.anton-paar.com
Texture spraying for interior, decorative and exterior fi nishesWith their increased
performance, the Graco
RTX 5500PI, Pro Interior
Series and RTX 5500PX,
Pro Exterior Series can
tackle more demanding
jobs and handle the most
challenging materials.
They enable effi cient work in
order to achieve the desired
fi nish for every job. As the
RTX range is compatible
with most base and top
coats, residential EIFS
(Exterior Insulation Finishing
System) jobs are one of its
many applications.
www.graco.com
Flow and levelling additives minimise complexity in can and coil coatingsTEGO Flow 375 and TEGO
Flow 460 N from Evonik are
two new silicone-free fl ow and
levelling additives specifi cally
developed for use in can and
coil coatings. Both products
are listed worldwide and are
suitable for direct contact
with food (FDA 175.300).
This reduces complexity for
coatings manufacturers and
enables broad use. Instead of
using many different products,
manufacturers can use the
same additive for more diverse
end-uses.
Both additives make an
impressive contribution to
meeting the high demands
made on the global production
and marketing of can and coil
products. End-users’ decisions
are strongly infl uenced
by quality considerations
and appearance.
“Both products are
silicone-free. Impurities and
associated cratering can,
therefore, be excluded, thus
ensuring smooth-running
production”, explained Kirstin
Schulz, Marketing Director
for industrial coatings. In
addition, the fl ow and levelling
additives exhibit improved
heat resistance and give the
coating a durable, high-
quality appearance.
TEGO Flow 375 is especially
compatible in solvent-based
formulations and achieves
optimum gloss values.
TEGO Flow 460 N also
possesses de-aerating
characteristics, thus enabling
defect-free application
especially in pigmented
formulations. Very good
adhesion and wetting
properties in multi-coat fi nishes
enable both products to be
used in all the coats without
impairing the painting process.
Both additives are free
from aromatics.
www.tego.de
Alesta Lync DOD systemAxalta Coating Systems’ Alesta
Lync, is a dry-on-dry (DOD)
powder coating application
system. It is a cost-effective
solution to the energy-consuming
process of two-layer systems
that require two separate bake
cycles and engineered to provide
performance improvements
compared to single layer systems.
Alesta Lync is designed to
provide two paint layers but
requires only one cure cycle.
It, therefore, reduces process
time, paint shop footprint
and capital investment, while
increasing productivity.
www. axalta.com
Phoseon FireEdge FE400 LED curing systemsPhoseon Technology’s
FireEdge FE400 LED curing
products have advanced
features that deliver maximum
fl exibility. With built-in intensity
control options, the FireEdge
FE400 can be used for
both full-cure and pinning
applications by providing high
UV power. The air-cooled
products offer customers
process stability with
Phoseon’s patented TargetCure
technology that provides users
with precise and predictable
UV output. Phoseon’s scaling
feature allows units to be
stacked ‘end to end’ with
contiguous, uniform UV output
to fi t any application size.
The FireEdge FE400
also comes equipped with
WhisperCool technology that
provides a quieter solution with
high UV output and small form
factor. WhisperCool technology
uses proprietary and patented
Phoseon innovations.
www.phoseon.com
PosiTector inspectionThe award winning DeFelsko PosiTector gauge
accepts all coating thickness (6000/200),
surface profi le (SPG/RTR), environmental
(DPM), salt contamination (SST), Shore
hardness (SHD) and ultrasonic wall thickness
(UTG) probes.
This innovation allows quick and easy
conversion from a coating thickness gauge
to a surface profi le gauge, dew point meter,
soluble salt meter, Shore hardness durometer
or ultrasonic wall thickness gauge with a simple
probe change. Each probe retains its own unique
calibration information allowing for full probe
interchangeability. Long form certifi cates of
calibration are included with each probe.
Available as either standard or advanced, all
models feature colour LCDs, built-in memory,
onscreen statistics and PosiSoft USB drive.
Advanced models also include onscreen graphing
and more.
www.defelsko.com
Controlled Release Dry-Film Preservatives
troycorp.com [email protected]
Troysan® 206CR
Troysan® 889CR
Paints & CoatingsConstruction MaterialsArchitectural & Decorative
Troy Corporation introduces the Future of Dry-Film Protection: advanced Troysan® CR preservatives. With controlled release technology for long-lasting performance, Troysan® CR can take your coatings into the future. Elevate your business to Gold Standard status with Troy.
C1 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
Organised by: On behalf of my colleagues, it is my great pleasure to welcome you, once again, to the Dubai International
Convention & Exhibition Centre for the Middle East Coatings Show 2017, organised by dmg :: events.
The Middle East Coatings Show 2017 Dubai, now in its 24th year, is still the only dedicated coatings event in the Middle East and Gulf Region for raw materials suppliers and equipment manufacturers for the coatings industry.
Coatings production continues to grow throughout the Middle East and the Middle
East Coatings Show is undoubtedly one of the major events in the world for the coatings industry and provides an excellent opportunity to suppliers of chemical raw materials, process plant and test equipment.
The Middle East Coatings Show is a three-day event and will allow you to spend more time exploring your business requirements and to have the opportunity to return for a second visit or bring colleagues to meet and discuss your needs.
The Middle East Coatings Show 2017 Dubai will be promoting the latest paint and coatings technologies for the region’s environmental, manufacturing and industrial needs. This is your best opportunity to make the most of an international networking forum and meet representatives from the world’s leading manufacturers and suppliers.
A series of Business Presentations will be given by exhibitors during the first two days within the hall, to which all visitors are invited free-of-charge, so don’t miss this great opportunity to hear first hand about new developments, techniques and solutions.
Also, published each day are the ever-popular Show Dailies, in which news and
views will be highlighted to guide visitors to meet potential business opportunities.
The Middle East Coatings Shows will take place annually in Dubai and every two years in Cairo and the next MECS 2017 Cairo will be held from October 11-12, 2017 at the Cairo International Convention and Exhibition Centre offering a further opportunity to expand your business relations in this region.
I do hope you find your visit to the Middle
East Coatings Show successful, rewarding and profitable and we wish our international visitors an enjoyable stay in Dubai.
Ian FauxVice President
dmg events (MEA) Ltd
MIDDLE EAST COATINGS SHOW 2017
Dubai International Convention and Exhibition Centre, UAE
March 13-15, 2017
Welcome to Dubai
ContentsExhibitor Entries C2
Exhibitors A-Z C18
Product Finder C20
Business Presentations C23
Floorplan C24
Cover imageTinting Systems Company (TSC) is a one-stop tinting solutions provider
for the paint, coating and composite industry. Based in Saudi Arabia, TSC has been serving customers in the MENA, Asia Pacific and European regions for more than a decade.
Within a short span of its inception, TSC established a benchmark in the industry through its wide variety of
point-of-sale colourants and in-plant pigment pastes for architectural
and industrial applications. Visit us at stand No H2
C2 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
E6ABC Chemical Exports PVT LtdPO Box 8330 Saif Zone Sharjah 830000 UAETel: +971 6 5579612Fax: +971 6 5579614Email: [email protected]: www.abcchemical.comStand contact: N K GaneshanABC Chemical group is one of the largest
export/import distribution houses supplying
raw materials to the printing ink, paint,
plastic, resins and packaging industries.
Its product range includes pigments,
resins, resin raw materials, plasticisers,
polyurethane resins, nitrocellulose etc. It
assures quality products at competitive
prices backed by after sales services.
F19AGC Chemicals EuropeZuidplein 80 - H-Tower Amsterdam 1077XVThe NetherlandsTel: +31 208 804174Fax: +31 208 804188Email: [email protected]: www.agcce.comStand contact: Ben RunhaarAGC and its subsidiary AGC Chemicals
Europe present Lumiflon®, a Fluoro-resin
for high durable paints and coatings, which
provides strong weathering and corrosion
protection. Buildings and other structures
will maintain their original appearance for
years (>25 years). Lumiflon® resins are
available for solventborne, water-based and
powder coatings.
C19Akkim Yapı Kimyasalları San ve Tic ASYesilbayir Mah. Simsir Sok. No 22 Hadimkoy Arnavutkoy Istanbul 34555 TurkeyTel: +90 21 2771 1371Fax: +90 21 2771 4939Email: [email protected]: www.akkim.netStand contact: Yasin ZenginAkfix focuses on developing eco-
friendly, life esteem chemical products
and technologies, to create permanent
solutions for customer needs. Akfix offers
its customers a wide product range of:
Coating, waterproofing & surface;
Applications systems; Polyurethane aerosol
foams; Sealants; Adhesives; and Technical
aerosol products.
K8Al Khowahir ChemicalsP O Box 6870 Sharjah 6870 UAETel: +971 6 542 4116Fax: +971 6 542 4016Email: [email protected]: www.khowahir.comStand contact: Ligy PhilipOne stop shop for all raw materials for
paint, coating, ink, construction chemical,
swimming pool chemicals, adhesives,
detergents, food & beverage, laboratory
chemicals and fibreglass chemicals. Its
association with principals like SE Tylose,
Lonza, Clariant, Evonik, BYK Chemie,
Eastman and BASF for their speciality
products makes it one of the leading
suppliers of paint and coating chemicals.
C6Al Nahda International FZCOEmail: [email protected] contact: ArunEthanol, IPA Pure, PropBH, solvents,
acetates, alcohols, ketones, inorganic
chemicals, aromatics, hydrocarbon
solvents, etc.
B8, B9Al Shihab Al Thahabi Tr Co LLCPO Box 30681, Sharjah, UAEBuhairah Corniche Al Durrah Tower, Office No 901Sharjah 30681 UAETel: +971 6556 8301Fax: +971 6556 8302Email: [email protected]: www.thahabi.aeStand contact: Mr Rahim K Jamal, General ManagerAl Shihab Al Thahabi is a UAE-based
company with a long pedigree of trading
in the Arabian Peninsula. Operations cover
the countries of the GCC. Over the years Al
Shihab Al Thahabi has built an impeccable
reputation as the preferred supplier of
chemicals, machinery and equipment for
the paint & coating industry.
K5Anadolu Mikronize Madecilik San ve Tic ASDrug Reis Mah Tekstilkent Cad.Koza Plaza A Blok No 17, Kart 5 EsenierIstanbul 34235TurkeyTel: +90 532 208 5552 /+90 212 583 1131Email: [email protected]
G15Anhui Hengyuan Chemical Co LtdNo 16, Zijin Road Circular Economy Zone Hui Zhou DistrictHuangshan City, Anhui 245900PR ChinaTel: +86 559 3515800Fax: +86 559 3515205Email: [email protected]: www.0086xy.comStand contact: Jiang XiaoheAnhui Hengyuan Chemical is a qualified
supplier of coatings materials, powder
coatings additives, reactive diluents, floor
coating, paint, composite, adhesive, silane
coupling agent etc.
B12Anhui Shenjian New Materials Co LtdNo 8 Baoshun RoadQiaobei Industrial Park Wuhu, Anhui 241008PR ChinaTel: +86 1390 963 6012Fax: +86 55 3531 7878Email: [email protected]: www.shen-jian.comStand contact: Tong MengAnhui Shenjian New Materials Co, Ltd is
one of the biggest producers of saturated
polyester resins for powder coatings in
the world. It has 30 years' experience in
researching, developing and producing
polyester resins. In 2016, the sales volume
of its polyester resins reached 120,000t.
C6Anichem FZCOJAFZA Ansol Gulf Building (Opp Shell Terminal) Dubai, Dubai 18312 UAETel: +971 434 73688Email: [email protected]: www.alnahdafz.comStand contact: ArunCoating additives, acrylates, polymer
emulsions, cellulose ethers, RDP, etc.
E16Anqing Hongyu Chemical Co Ltd
E6Asha Penn Color Pvt LtdAsha House, Plot no 808/CDr B A Road, Dadar TTMumbaiIndiaTel: +91 222 414 0020Fax: +91 222 413 7190Email: [email protected]: www.ashapenncolor.com
C3 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
Stand contact: Mr B B SenAsha Penn Color Pvt Ltd (APC) is a joint
venture between Asha Dispersions Pvt
Ltd Mumbai, India & Penn Color Inc of
USA. APC produces pigmented chips,
which are concentrated solid pigment
dispersions, based on various resins,
such as nitrocellulose, vinyl, acrylic, poly
vinyl butyral, polyamide, CAB etc. APC
also produces pigment preparations in
liquid form for various end applications,
such as industrial coating, wood lacquer,
automotive paints etc. Co-exhibiting with
ABC Chemical Exports.
E3ATP Engineering BVPalmpolstraat 56 CH Almere 1327 The NetherlandsTel: +31 (0) 36 5316 165Fax: +31 (0) 36 5313 794Email: [email protected]: www.atpengineering.nlStand contact: Michael de BruijnATP designs and has supplied for 28 years
high dissolvers, mixers, mills and complete
filling lines for paint, coating, adhesive,
plastic and chemical industry. More
than 70% of its machines are developed
in-house and manufactured. It supplies
both nationally and internationally to
its customers.
Co-exhibiting with Erichsen GmbH.
D20Axcentive SarlWebsite: www.axcentive.com;www.halamid.comWith the Ketjenflex® range of additives,
Axcentive provides products for inks,
coatings, adhesives, amino/phenol resins,
nail lacquers and plastics. The range
consists of speciality flexibilisers, internal
plasticisers, adhesion promotors, flexible
coresins and safe phthalate replacements.
Its extensive know-how and market
dedication makes it the ideal partner to
supply technical services when required
and support innovative developments.
Co-exhibiting with Harco Group.
J5BEVS Industrial Co LtdRm 1818, Dongcheng Plaza No 3 Huangpu Road East Guangzhou, Guangdong 510700 PR ChinaTel: +86 20 2219 7697Fax: +86 20 2219 7673Email: [email protected]:
www.bevsinfo.com/en/index.htmlStand contact: Wilson TanBEVS is an ISO approved testing
instruments manufacturer in the field of
coating, paint, resin and ink. Its QC and
testing instruments are made abiding by
the highest standards and combined with
advanced technology. BEVS will be best
partner with you by providing the whole
solution of testing, inspection instruments.
E6BIP (Oldbury) LtdTat Bank Road, West Midlands B69 4NH UKTel: +44 121 544 1555Fax: +44 121 552 6148Email: [email protected]: www.bip.co.ukStand contact: Mr Ian WhyleyBIP (Oldbury) Ltd is a leading UK-based
manufacturer of an extensive range
of polymers under the Surkopak and
Surkofilm trademarks. These polyurethane
resins are used throughout the printing ink
industry, which are designed specifically for
the manufacture of solvent-based inks for
use in various food packaging applications.
Co-exhibiting with ABC Chemical Exports.
A1Biuged Instruments Co LtdRm 101, No 3, Sicheng Road, Gaotang Software Park, Tianhe Dist, Guangzhou Guangdong 510663PR ChinaTel: +86 133 1605 3898Fax: +86 020 3295 5818Email: [email protected]: www.biuged.comStand contact: Sara YaoBiuged Instruments Co Ltd Is one of the
leading professional manufacturers of
instruments used in the paint, ink and
coatings industry in China. Until now, it has
established more than 50 agents or offices
globally. Its instruments are of a high quality
and high ratio of performance to price.
C15 Black Diamond Material Science Co Ltd5/F, Building C, Blue Ocean, Qianshan Road, Hefei City, Anhui ProvincePR ChinaTel: +86 138 5513 1348Mobile: +86 138 5513 1348Email: [email protected]: www.bdms.coStand contact: Zhang WenLongPigment carbon black is essential to
coatings, ink and plastics industries,
applications, including high end
applications, such as automotive
coatings, toner of printer and copier,
electronics plastics.
G5Bodo Moller Chemie Middle East FZE
L4Bonyan Kala Chemie CompanyUnit 4, No 2, 13th Alley, Bokharest St Tehran 1513754915 IranTel: +98 21 8855 5557Fax: +98 21 8871 6808Email: [email protected]: www.bonyankala.comStand contact: Ayda HoushangiBKC, Bonyan Kala Chemie Co, is a
manufacturer of a wide range of products
covering Ortho & ISO unsaturated polyester
resins (used in artificial stones, slab, float)
and long, medium and short oil alkyd resins
(used in paint industries) with more than 20
years' experience.
F1Brilliant Group Inc750 National Court, Suite 100 Richmond, California 94804 USATel: +1 141 5771 4757Email: [email protected]: fluorescentcolor.comStand contact: Shaun MihalickBrilliant Group offers a world-class range of
high-quality daylight fluorescent pigments,
colourants, dispersions and paint and ink
concentrates to the global marketplace.
Coupled with its focus on total customer
satisfaction, it brings a comprehensive
solution to your fluorescent colour needs.
L7Bühler AGGupfenstrasse 5 Uzwil 9240 SwitzerlandTel: +41 71 955 11 11Email: [email protected]: www.buhlergroup.com/wetgrinding_dispersingStand contact: Daniel TroxlerInks, coatings, electronic materials and
fine chemicals – in all industries where wet
grinding and dispersing are key processes,
Bühler demonstrates extensive know-how
and the ability to provide its customers
with tailor-made systems. The local service
centres ensure short reaction times and
highest efficiency of Bühler plants all over
C4 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
the world.
E7Cabot Specialty Chemicals IncPO Box 17894, Jafza South, Dubai UAETel: +971 4 8806 058Fax: +971 4 8806 057Email: [email protected]: www.cabotcorp.comStand contact: Mr Carsten SpielbergCabot is a leading global supplier of
fumed metal oxides, carbon blacks
and dispersions for a wide range of
industries, which includes coatings,
construction, adhesives and sealants,
printing and packaging, personal care and
pharmaceutical. Co-exhibiting with H.A.K
Industrial Chemicals (LLC) - a division of
The Kanoo Group.
F6Celanese EmulsionsEmail: [email protected] contact: Eugenia KrasnokCo-exhibiting with Solvochem FZCO.
K18Changzhou Longxin Machinery Co LtdXixiang, Hengshanqiao Town, Wujin District, Changzhou, Jiangsu 213119 PR ChinaTel: +86 (0)519 8866 3798Fax: +86 (0)519 8860 8716Email: [email protected]: www.hbhj.comStand contact: Ms YaoLongxin, founded in 2001, has grown into
a company with more than 150 employees,
25,000m2 of workshop space and more
than 10 sets of machinery process units.
The main products of Longxin are sand
mills, bead mills, three roll mills and high
speed dispersers.
J16ChemfiltS No 881, 882/1+2, 882/3+2, 883, 885 Near New Water Tank of G.I.D.C., Phase-IV, Next to Atlanta Electricals Ltd Anand, Gujarat 388325 IndiaTel: +91 2 6922 36846Fax: +91 2 6922 36850Email: [email protected]: www.chemfilt.comChemfilt - a project engineering company
since 1985 has built pioneering plants for
paint and resin industries globally. Sand
mills, spin flash dryers, rotary vacuum
dryers, classifiers, pneumatic conveying
systems, grinding and classification
systems pertaining to international quality
standards exhibit its consolidated hold in
these fields.
C5Chemical Marketing & Distribution Co Ltd
E18AChemieland International Co Limited159 North Wenshui Road, Anqiu Economic Development Zone Shandong Province, PR ChinaTel: +86 532 8612 7628Email: [email protected]: www.chemieland.cnStand contact: Wu HuanliChemieland International Co Limited
specialises in the manufacturing and
marketing of various kinds of machineries
and lab instruments, all relating to the
production of various coatings, wall putties,
powder mortar and adhesives etc.
G1Chemours Internatiional Operations SarlChemin du Pavillon 2CH-1218 Le Grand-Saconnex-GenevaSwiterlandTel: +32 470 248498Email: [email protected]
H1CChemprobe Chemical Co Ltd
B4Clean Blast InternationalDubai Investment Park 2, PO Box 93716 Dubai UAETel: +971 4 8847344Email: [email protected]: www.clean-blast.comThe Clean Blast International offers a
complete range of surface preparation
equipment and accessories. Co-exhibiting
with DeFelsko.
B21Coatings GroupPolymers Paint Colour Journaldmg::events (MEA) LtdQuartz House20 Clarendon RoadRedhillSurrey RH1 1QXUKTel: +44 (0)1737 855000Fax: +44 (0)1737 855034Email: [email protected]
Website: www.coatingsgroup.comStand contacts: Kez Chen, Group SalesDirector; Sue Tyler, Senior EditorThe Coatings Group organises a number
of successful coatings exhibitions,
conferences and events around the world,
as well as publishing PPCJ and sister
magazine, APCJ. PPCJ is the leading
magazine for the coatings industry
throughout Europe, the Middle East and
North Africa, while APCJ is dedicated to
the coatings industry in South East Asia,
the Pacific Rim, Australasia and China.
As well as staging the highly successful
Middle East Coatings Shows, the Coatings
Group holds events in North Africa
and Asia.
D11ComecVia Consolini, 12Canossa, RE 42026ItalyTel: +39 0173 230 411Email: [email protected]: www.comec.eu.comStand contact: Mrs Cristina CorderoComec, specialises in dispersing and
milling, takes pride in the technical flexibility
of a science-based organisation to provide
unique solutions for more than 40 years.
Comec, in complete synergy with Dromont,
works in close co-operation with its clients,
researching and developing new leading
edge opportunities.
E8Coprabel SAAvenue Vesale 20B-1300 Z.I Wavre NordBelgium Tel: +32 102 38280Fax: +32 102 38289Email: [email protected]: www.coprabel.comStand contact: A NaamaniCoprabel, Belgian producer of paints.
Registered marks: Coprabel’s EASY
COLOR® for paints/varnishes (metallic
pigmented paints ‘Gold, Copper, Silver’)
and Coprabel’s NARI® (wood treatment).
Coprabel is also an agent for international
manufacturers of raw materials for the
paints, inks, adhesives, detergents and
plastic master batches industries. Products:
metallic powders/pastes, pine/linseed oil,
colourants, dryers, etc.
F17CovestroOffice 110, Dubai Science ParkAl Barsha South 2
C5 Middle East Coatings Show 2017www.coatingsgroup.com
Exhibition Catalogue
Dubai 503073UAETel: +971 4275 7301Email: [email protected]: www.covestro.comStand contact: Mr Subramanain KSSWith sales of about €12.1bn in 2015 and
15,800 employees, Covestro is among the
world’s largest manufacturers of high-
tech polymer materials. The company’s
innovative products and solutions are used
in many key applications that help improve
quality of life, thus making the world a
brighter place.
C1CristalMalik Road, King's Road Tower, King Abdulaziz Road, 16th FloorPO Box 13586, Jeddah 21414Saudi ArabiaTel: +966 122 248 260Email: [email protected]: www.cristal.comStand contact: Hussain HashihabCristal is one of the largest titanium
producers and a leading producer of
titanium chemicals. It manufactures
products for many global industries,
including paint, coatings, plastics, air and
water treatment, catalysis, renewable
energy, construction, industrial chemicals
and metals processes. Cristal is the largest
subsidiary of the National Industrialization
Company (Tasnee).
D15Cristoforo Tixe d'Arenzano SrlVia Pian Masino 29Arenzano, Genova 16011ItalyTel: +39 (010) 9111271Email: [email protected]
A10Datacolor AG EuropeLoorenstrasse 9 Dietlikon 8305 SwitzerlandTel: +41 44 835 3830Email: [email protected]: www.datacolor.comStand contact: Charlotte WilleDatacolor, a global leader in colour
management solutions, provides
software, instruments and services to
assure accurate colour of materials,
products and images. At MECS 2017
Datacolor will show its new Datacolor
800 family, the only true close tolerance
Benchtop Spectrophotometers.
B4DeFelsko Corporation800 Proctor AveOgdensburg, NY 13669USATel: +1 315 393 4450Email: [email protected]: www.defelsko.comStand contact: David BeamishDeFelsko, a leading USA manufacturer
of inspection instruments, proudly
manufactures PosiTector and PosiTest
brand of instruments, including the
PosiTector series of interchangeable
probes for measuring coating thickness,
profile, environmental conditions, salt
contamination, Shore hardness and wall
thickness. Products include PosiTector
6000 series of gauges and PosiTest Low
voltage Pinhole Detector.
G10Deqing Tongchem Co LtdNorth 621 Yingxi Road Wukang Deqing Zhejiang Province, PR China 313200Tel: +86 135 8792 0719Email: [email protected]: www.tongchem.comStand contact: Michael LiuTongchem is one of the main suppliers
of pigment in China, including iron oxide
pigment, organic pigment, chrome
yellow pigment, etc. It has counter
type products against world famous
suppliers of each pigment and has ISO
9001:2008 certification.
F24De VreeToekomstlaan 10Merksem, Antwerp 2170BelgiumTel: +32 3 641 43 00Fax: +32 3 646 48 15Email: [email protected]: www.devree.comStand contact: Gert Van HerwegenDe Vree designs and builds semi automatic
and fully automatic volumetric and weight
fillers for Industrial fluids, such as paints,
solvents, thinners, hardeners, putties,
adhesives etc. The company has been in
business for 75 years and is the preferred
supplier to some of the major players in
the industry.
F31Diaf Pilvad A/SPraestemosevej 2-4 Fredensborg 3480 DenmarkTel: +45 21 692077 Fax: +45 49 163242
Email: [email protected]: www.pilvaddiaf.comStand contact: Hans Peter HansenDiaf was founded in 1912 and is involved
with the manufacture of production
equipment for the chemical/processing
industry, paint and ink industry. Today,
Diaf is one of the leaders when it comes
to planning, engineering, development,
construction, know-how, installation, start-
up/commissioning of turnkey projects for
dissolvers, mixers, homogenisers, bead
mill, filling equipment etc.
This company is co-exhibiting with
Dynamech Industries (M) Sdn Bhd and
Jintai (M) Sdn Bhd.
D11DromontVia Borzone, 42 Grinzane Cavour, Cuneo 12060 ItalyTel: +39 01 7323 0411Email: [email protected]: www.dromont.comStand contact: Mrs Cristina CorderoDromont is an established company,
a leader in dispensing knowledge,
producer of factory systems and industrial
applications, highly specialised in the paint
industry, since 1987.
Dromont serves the world leading
companies in the paint, ink, textile,
ceramic, cosmetic, and speciality
chemical industries.
F31Dynacolour (Asia Pacific) Sdn BhdNo 11-1, Jalan Puteri 4/1, Bandar Puteri Puchong, Selangor 47100 MalaysiaTel: +603 8068 1888Fax: +603 8068 1999Email: [email protected]: www.dynamech.comStand contact: Michael CheahDynacolour is a pigment powder and
pigment paste / colour preparation
producer. It supplies a wide range of
organic pigment and Inorganic pigment,
oil / solvent / water-based pigment colour
paste / colour preparation, iron oxide,
transparent iron oxide etc.
For further information please visit www.
dynacolour.com. Co-exhibiting with
Dynamech Industries.
F31Dynamech Industries (M) Sdn BhdNo 11-1, Jalan Puteri 4/1, Bandar Puteri Puchong, Selangor 47100
C6 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
MalaysiaTel: +603 8068 1888Fax: +603 8068 1999Email: [email protected]: www.dynamech.comStand contact: Michael CheahDynamech Industries is the pioneering
machine producer for horizontal grinding
mills, vertical bead mills, triple roller mills,
high speed mixers, twin or tri-shaft mixers,
packing machines etc. Grinding media, such
as zirconium beads, glass beads, chrome
steel balls and others are available. Further
information, please visit www.dynamech.com
C15DECOD Specialties (Wuhan) Co LtdRoom 1132,Jinye International Mansion 128# Jiefang Avenue, Wuhan, Hubei 430000, PR ChinaTel: +86 027 8374 8759Email: [email protected]: www.whecod.comStand contact: Hu YonghongA professional manufacturer of
environmentally friendly plasticisers, like
Dipropylene Glycol Dibenzoate (DPGDB),
Diethylene Glycol Dibenzoate(DEGDB),
used in adhesives, PU systems, PS
sealants, caulks, resilient flooring, PVC,
artificial leather cloth, PVC coated cloth,
paints, inks, pesticides, etc.
K16Ege Kimya San Ve Tic ASAyazma Cd. No 37 Papirus Plaza Kat:10 Kagıthane Istanbul 34410 TurkeyTel: +90 54 9746 4015Email: [email protected]: www.egekimya.comStand contact: Banu ServetogluEge Kimya produces driers for the
paints, coatings and ink industries. With
its installed capacity, Ege Kimya is the
third largest manufacturer in Europe and
supplies driers to 56 countries worldwide.
Ege Kimya is your trustworthy partner for
your future expectations with its quality,
high technology and experienced staff.
F32El-Mohandes Company for Manufacturing and Trading Modern ChemicalsAlex-Cairo Desert Roadkm 71, Janaklis Entrance, km 15Abou-ElmatamirBeheira 22732EgyptTel: +20 45 2452 103 Ext 124
Fax: +20 45 2452 101Email: [email protected]: www.el-mohandes.comStand contact: Seifeldin Mahmoud HashishEl-Mohandes company was established in
1998 on an area of 65,000m2. It produces
90,000t annually of mixed solvents, wood
paints and automotive paints in Egypt.
It imports annually 70,000t of solvents
and paint raw materials to be used in
manufacturing and trading process inside
the Egyptian market.
A3El Zain Chemicals Company250 Acres Area, El Robiky EastBadr Industry City, CairoEgyptTel: +20 16 880 1560Website: www.elzaingroup.com
E3Erichsen GmbH & Co. KGAm Iserbach 14 Hemer, NRW 58675 GermanyTel: +49 (0) 2372 9683-0Fax: +49 (0) 2372 6430Email: [email protected]: www.erichsen.deStand contact: Mr Markus MoritzErichsen Germany researches,
develops, designs and manufactures
testing equipment and machines for
the following fields of application: Sheet
metal testing, surface testing, corrosion
testing and materials testing. Its products
are mainly supplied to the sheet metal,
paint, lacquer and plastic producing and
using industries.
F8Esterpol Performance Resins
A7Euchemy Industry Co Ltd800, Fengtai Road, Industry Area,Linghu Town, Nanxun DistrictHuzhou City, Zhejiang ProvincePR ChinaTel: +86 572 290 2567Email: [email protected]
H1AEurochem International FZEY14 Saif Zone, SharjahUAETel: +971 655 71654Fax: +971 655 71933Email: [email protected]
B8Fast & Fluid, The Tinting CompanyHub Van Doorneweg 31, Sassenheim, The NetherlandsTel: +31 02 5224 0800Email: [email protected]: www.fast-fluid.comStand contact: Mr Bartek Janas, Country Manager Middle East & TurkeyFast & Fluid, The Tinting Company, is the
world leader in dispensing, shaking and
mixing equipment for the paint industry. Its
worldwide network of offices, production
facilities and sales & service partners is
always ready to help you. Co-exhibiting
with Al Shihab Al Thahabi Tr Co LLC.
J24Fenchem Biotek Ltd19th Fortune Building,3 59th Hongwu Road, Nanjing 210002PR ChinaTel: +86 25 8421 8888 668Email: [email protected]: www.fenchem.comStand contact: Chen PingxiA qualified supplier of coatings materials,
binders, powder coatings additives, equipments.
D1Firstruth Colorants China Co Ltd1109 Famous City (A02)6 Xihu Road East WuxiJiangsu Province 214011PR ChinaTel: +86 510 8203 9970Email: [email protected]
B11Fujian Jintai Fine Chemical Co LtdA Area, Pucheng Industrial Park, Pucheng Country, Nanping City, Fujian Province 353400, PR ChinaTel: +86 599 286 2333Email: [email protected]: www.fujianjt.comStand contact: Linda LiuFujian Jintai is a professional mica
pearlescent pigment manufacturer with
good quality materials. Annual capacity is
2000 tons.
C10G&J ResourcesUnit 502, 7300 Warden Ave, Markham, Ontario L3R 9Z6CanadaTel: +1 514 805 0146Fax: +1 905 604 7009Email: [email protected]: www.gandjresources.com/
C7 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
Stand contact: George GendiG&J Resources Inc was incorporated in
Toronto, Canada in 2001. In 2013 it was
authorised by Yunnan Xinli Co Ltd, in China,
to market its titanium products out of Asia.
Yunnan Xinli is a fully integrated
manufacturer. TiO2 is manufactured through
the most advanced chloride process, which
provides better whiteness and stability.
H13Galstaff Multiresine SpAVia Stazione 90, 210120 Mornago (Varese)ItalyTel: +39 33 8626 2628Fax: +39 03 3190 4279Email: [email protected]: www.galstaffmultiresine.comStand contact: Rebizzi PiercarloGalstaff Multiresine SpA is an Italian
enterprise with sister company in Brazil
for the production of synthetic resins and
auxiliaries for coating, with a history and a
know how of more than half a century.
Its dedicated sales network can provide a
full marketing and sales support worldwide.
N3General Mineral Industries CoPO Box 20074 Industrial Area 1AjmanUAETel: +971 6 7480101Fax: +971 6 7480929Email: [email protected]: www.gmillc.comStand contact: H L ShahGeneral Mineral Industries Co has been
in existence since 2000, with technical
infusion from Cyprus, producing high
quality precipitated calcium carbonate
for paints, dentifrice, inks, paper,
detergents, cosmetics, rubber & food/
pharma application. The products can
be customised to meet specific customer
requirements and offer quality consistency
across the globe.
M3DGreen Egypt Co17 Gamal El - Fasahany StAlmaza, Cairo 1361 EgyptTel: +20 2 291 0935
J1Guangxi Wuzhou Golden Spot Resin LtdNo 360, Xinan Road, Longxu Town, Wuzhou, Guangxi, PR China 543100Tel: +86 774 268 6388Email: [email protected]
Website: www.golden-spot.netStand contact: Gavin LeeProduces rosin ester, maleic resin, phenolic
resin for water-based ink, solvent based
ink, offset ink, UV ink, paint, adhesive.
G11AGuangzhou Jinzong Machinery Co LtdHanxi Avenue, Panyu District, 77B Xieshi RoadGuangzhou, Canton 511495PR ChinaTel: +86 20 3990 0130Fax: +86 20 3990 0129Email: [email protected]: www.jinzongmachinery.comStand contact: Rachel QiuJinzong, founded in 1990 has four
wholly owned subsidiaries, specialising
in the development of various industrial
equipment, research of PLC control
systems, industrial engineering design and
installation etc. The chemical machinery
division set up is in 17,000m2 and owns
dozens of patented technologies.
Production base has ISO9001-2008
certification and its products have
CE certification.
L11Gulmer Madencilik San Ve Tic AS
E7H.A.K Industrial Chemicals (LLC) - a division of The Kanoo GroupPO Box 290, First Floor, Kanoo Building Sh Khalifa bin Zayed Road Karama, DubaiUAETel: +971 4336 9700Fax: +971 4336 0924Email: [email protected]: www.hakdubai.comStand contact: Mr Sharad DholeH.A.K Industrial Chemicals is a leading
supplier of speciality raw materials to the
paints, coatings, printing inks, construction
chemicals, personal care, cleaning
chemicals and associated industries in the
GCC. Details of the entire product range
and companies it works with can be found
on its website www.hakdubai.com
E1Hangzhou Coloring Chemical Co LtdRm 4101, No 2 building, Radisson Fortune Center No 108 North Shixin Road, Xiaoshan Dist HangzhouZhejiang 311200 PR ChinaTel: +86 571 8275 6966Email: [email protected]
Website: www.coloringchem.comStand contact: He ChunhuaA leading manufacturer of pigments
for coatings and paints, inks and
plastics application.
D4Hangzhou Forward Fine Chemical Co LtdNo 1618 Shiji Av, Linjiang Industrial Park, Hangzhou, Zhejiang 311228PR ChinaTel: +86 571 8298 8135Email: [email protected]: www.forward-ep.comStand contact: Yoyo HerQualified supplier of pearlescent pigment.
K1Hangzhou Synox Pigments Co LtdRoom 1304, Tianheng Building, No 1509 Binsheng Road, Binjiang DistrictHangzhou, Zhejiang 310051PR ChinaTel: +86 571 8658 9510Fax: +86 571 8715 6373Email: [email protected]: www.synoxpigments.comStand contact: CandySynox, the leader in the production field
of iron oxide pigments, with commitment
to manufacturing and supplying high-
performance iron oxide pigments for
the beautification of virtually everything
since 2003. It is devoted to supplying
products with stable quality, competitive
price, flexible packaging and best service.
Colours available: red, yellow, black, brown,
orange, etc.
D20Harco GroupAvenue Louise 390 Brussels 1150 BelgiumTel: +32 2 673 27 44Fax: +32 2 672 64 50Email: [email protected]: www.harcogroup.beStand contact: Ioannis NotoglouIt supplies different types of raw materials
(resins, additives, extenders, pigments,
chemicals, machineries) for the coatings,
inks, adhesive industries, enabling
its customers to produce in a cost
effective way and meet their customers’
quality demands.
It also supplies ready-to-use industrial
(thermal insulation, sound damping,
waterproofing) coatings.
C7Haris Al Afaq
C8 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
PO Box 8141Saladdin Road DeiraDubaiUAETel: +971 50 456 5135Fax: +971 4 271 9285Email: [email protected]
H12Hefei Sunrise Aluminium Pigments Co LtdJinhu Rd, Shuangfeng Development Zone, Hefei, Anhui 231131PR ChinaTel: +86 0551 6685 7723Mobile: +86 186 5605 9623Email: [email protected]: www.xuyang.ccStand contact: Zhou XinxinThe biggest aluminium pastes
manufacturer in China.
G3Henan Botai Chemical Building Materials Co LtdRoom 1007, Unit 1, No 18, East of Dongfeng Road, Jinshui District, Zhengzhou 450000, Henan ProvincePR ChinaTel: +86 371 5598 8201Fax: +86 371 5598 8202Email: [email protected]: www.botaichem.netStand contact: Luise LiuBotai, a direct manufacturer that focuses
on technology and innovation, with more
than 10 years of history, is committed
to be the leader in the building additives
industry. Products include: Cellulose ethers
(HPMC, HEMC, MC, HEC); Re-dispersible
polymer powder; calcium formate; PP fibre;
superplasticisers.
J2Henan GP Chemical Co LtdRm 32, 12 Floor Unit 1 Block 15, D1 Luomanweisen, No. 168, Guoji Road Jinshui District, ZhengzhouHenan 450000 PR ChinaTel: +86 371 5508 1107Email: [email protected]: www.chinagpcchem.comStand contact: Zhang XuanyingA qualified supplier of coating solvents,
such as acetone solvents, acetate
solvents, chloride solvents, amine, glycol
ether solvents, plasticisers, corrosion,
pharmaceutical, BDO and its derivatives,
polyurethane (PU) products and
other solvents.
C16Hi-Tech Minerals & Chemicals
K27Hongye Holding Group
B5Horizon ChemicalsOffice 712D, Ibn Battuta Gate Offices Jebel Ali First, Dubai 488195 UAETel: +971 5075 50989Fax: +971 4513 5217Email: [email protected]: www.horizonchemicals.comStand contact: Moheb IsaacHorizon Chemicals is the distribution hub
of Eastern Seas Holding Co KSC and
Al Sanea Chemical Products, a leading
Industrial group of companies established
in 1977, specialising in the manufacture of
industrial chemicals, including white spirit
solvent, oil field chemicals, marine and
heavy chemicals.
P2Horizon for Plastic Products CoPO Box 265, Amman 11512JordanTel: +962 7 9504 9777Email: [email protected]: www.horizonplastic.comStand contact: Mutasem AbdelqaderHorizon for Plastic Products Co, Amman
Jordan, was founded in 2000. A leading
manufacturing company with the widest
variety of plastic products (injection) for
both food and non-food solutions in the
worldwide packaging industries.
Horizon services and offers containers for
various industries, such as coatings and
decorative paint.
F10Hormoz Powder FZE CoUnit 60, Phase 2, Hamriyah Free Zone Sharjah 51291 UAETel: +971 501 138 380Email: [email protected]: www.hormozpowder.aeStand contact: Farhad JamrizHormoz Powder is a manufacturer of
mineral, micronised powders. Some of our
main products are as follows:
calcium carbonate, red and yellow iron
oxides, batite, bentonite, hematite,
dolomite, talcum, limestone.
Please contact us for more information.
N1Hosokawa Alpine Aktiengesellschaft
Peter-Doerfler-Strasse 13-25Augsburg, Bavarian 86199GermanyTel: +49 821 5906 0Fax: +49 821 5906 261Email: [email protected]: www.hosokawa-alpine.comStand contact: Mr Roland BerteleHosokawa Alpine has been in business
for more than 100 years. In its activities
blown film and powder and particle
processing, it is a traditional trendsetter in
the world market.
C15CHubei Greenhome Fine Chemical Co Ltd12/F, Xinglong Building, 1007 Jiefang Ave, Wuhan, Hubei, 430022 PR ChinaTel: +86 027 6243 3883Email: [email protected]: www.greenhomechem.comStand contact: Luo XiaoyanThis company specialises in research and
development, production, sales and service
of Benzyl Benzoate, Benzyl alcohol, epoxy
reactive diluent series, epoxy hardener,
Benzoic ester series, Benzyl chloride
and Benzaldehyde.
K25Hubei Gurun Technology
F14Huzhou Mizuda Bioscience Co LtdRm 703, No 2993, Gong He Xin Rd Zhabei District, Shanghai 200072 PR ChinaTel: +86 21 614 21712 Ext 805Mobile: +86 136 0165 5858Email: [email protected]: www.mizudahope.comStand contact: Tan XiaolinCellulose ethers; iron oxide; titanium
dioxide; redispersible powder
polymer; organo clay; calcined kaolin;
barium sulphate.
K12IEC Plant Engineering SDN BHD
F6AImerys Minerals LtdPar Moor CentrePar Moor RoadPar, Cornwall PL24 2SQUKTel: +44 (0)1726 818000Fax: +44 (0)1726 811200Email: [email protected] contact: Ms Louise Haines
C9 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
D20Imerys TalcCo-exhibiting with Harco Group.
F7IMMEA srlVia Borsellino 27Rovato, Brescia 25038ItalyTel: +39 03 0772 1454Fax: +39 03 072 3895Email: [email protected]: www.immea.euStand contact: Mr Claudio VaccarezzaCompany Immea srl deals with the
production of different types of dosing
machines (automatic, semi-automatic, by
volume or by weight) and is able to offer
the best solutions to any need in filling
and dosing liquid products, and relevant
packing for all types of rigid containers, in
different shapes and sizes. Co-exhibiting
with Vibro-Mac srl.
C8Indian Chemical Industries1st Floor, Bhavani ChambersNr Times of India, Ashram RoadAhmedabad 380009, GujaratIndiaTel: +91 79 2658 7210Fax: +91 79 2658 1889Email: [email protected]: www.icidyes.comStand contact: Mr Timir ShahICI is a leading manufacturer of pigment
preparations & powder, established
since 1962.
Octafine pigment dispersion for paint
Octatint universal colourant for tinting machine
Octapol polyol-based colourant for PU foam
Octatone pigment preparation for flexo,
gravure ink
Icholace organic, inorganic pigment for
paint-coating, printing ink, plastic,
rubber and allied
Hydroflex water-based inks for flexo.
H12Inter China Chemicals Co Ltd1st Floor, No C19 Building, ZUSP, Dingmao New District, Jingshiwu Road, 212009, Zhenjiang, JiangsuPR ChinaTel: +86 511 8998 3592Email: [email protected]: www.chinatio2.comStand contact: Zhu FengqinChina’s No 1 TiO
2 technology company.
Comprehensive product chain
(rutile+anatase). Exclusive application
test process.
E7Intermediate Chemicals Co Ltd (Arabian Zinc Oxide Factory)PO Box 35790, Jubail Industrial City Eastern Province, Jubail 31961Saudi ArabiaTel: +966 13 341 7094Fax: +966 13 341 7910Email: [email protected]: www.arabianzinc.comStand contact: Mr Kaushik ShahA manufacturer of various grades of
zinc oxide and zinc dust for the coatings
industry. Co-exhibiting with H.A.K Industrial
Chemicals (LLC) - a division of The
Kanoo Group.
D9Jana - Jubail Chemical Industries CompanyPO Box 10661, Jubail Industrial City Jubail, Eastern Province 31961Kingdom of Saudi ArabiaTel: +966 13 347 8888Fax: +966 13 347 8666Email: [email protected]: www.jana-ksa.netStand contact: Brian Ferrer CabansagJana - Jubail Chemical Industries Company
situated in the Industrial City of Jubail,
Kingdom of Saudi Arabia is an affiliate of
NAMA Chemicals and produces a range
of epoxy resins – liquid, solution and solid
forms for a variety of applications.
Jana markets its epoxy resins under two
brand names – Araldite® and Razeen®. The
Araldite brand is more than 50 years old
and very well known the world over. It is
used under the license of Huntsman. Jana
also has developed its own brand name,
Razeen under which it sells epoxy resins.
Razeen was introduced and launched in
2004, which has found acceptability by
most of the customers. Currently, under
the Razeen brand name, all the products
manufactured are look-a-like matching
products to the Araldite branded products
licensed and sold by Jana. Jana produces
and markets quality epoxy resins to
exacting standards relied upon by many
of today's leaders in the coatings, resin,
composite and civil construction industries
on a global basis.
F14Jiangsu Gaxsn Chemical Co LtdNo 43, Changjiang East Road, Haian Nantong, Jiangsu Province 226600 PR ChinaTel: +86 213 861 8095Mobile: +86 139 1775 4092Email: [email protected]
Website: www.gaxsn.comStand contact: Derek XuAs one of the leading manufacturers
in China, Gaxsn specialises in R&D
and manufacturing special chemicals:
Defoamer, dispersing and wetting
agent. Baxsn brand has been registered
for the international market to satisfy
customers worldwide.
J13Jiangsu Guolian Technology Co Ltd32 Xianan Road Xiagang Street, Jiangyin, Jiangsu, 214442 PR ChinaTel: +86 510 8616 0580Email: [email protected]: www.guolianchem.comStand contact: Xu ShengA qualified supplier of coatings materials.
J28AJiangsu Tianyin Chemical Ind Co LtdQianguan, Zhoutie Town, YixingJiangsu 214262 PR ChinaTel: +86 510 8755 7125Mobile: +86 139 2132 3233Email: [email protected]: www.chinatianyin.comStand contact: Liu XiaoxiaoThis company supplies ethers and acetates
solvents for painting, ink, elc, aug, med,
etc, such as propylene glycol monomethyl
ether (PM)/propylene glycol monomethyl
ether acetate (PMA)/DN-12/BCS/BCSA/
PNB/PNP.
L1, L2Jiftex PolymersPO BOX 31388 Jeddah 21497Saudi ArabiaTel: +966 126 373073 & Mobile +966 5410 10078Fax: +966 126 371747Email: [email protected]: www.asiig.comStand contact: Engr Ayman KarajehJiftex Polymers, established in 2003, is
one of the pioneers in manufacturing
water-based emulsion polymer in the KSA
with production capacity of 60,000 ton/
yr. It serves paint, construction chemicals,
textile, carpet & adhesive industries.
Products: Homo polymer, Co polymer, Ter
polymer, Styrene acrylic emulsions, pure
acrylic and carpet latex.
F33Jinan Yuxing Chemical Co LtdNo 100 Yuxing Rd, Jinan Chemical Industry Park, Tianqiao District, Jinan
C10 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
Shandong 250119PR ChinaTel: +86 531 6761 2778Email: [email protected]: www.lxyx.chemchina.comStand contact: Chen LipingJinan Yuxing is first and one of the biggest
producers of titanium dioxide products in
China, current capacity is 12000t/yr with
both rutile and anatase type. Main types of
R818, R838, R868, R878, A1 are widely used
in industries, such as paint, plastic, paper,
printing ink, rubber, fibre, cosmetic, etc.
F31Jintai (M) Sdn BhdNo 11-1, Jalan Puteri 4/1, Bandar Puteri Puchong, Selangor 47100 MalaysiaTel: +603 8068 1888Fax: +603 8068 1999Email: [email protected]: www.jintai.com.myStand contact: Michael CheahJintai is the well established trading
company of raw material for coating,
paint, ink, rubber, plastic industry & etc.
It supplies nitrocellulose, nitrocellulose
solution, maleic resin, drier, alkyd resin,
petroleum resin, pigments, aluminium paste
etc. For further information, please visit us
at www.jintai.com.my.
Co-exhibiting with Dynamech Industries.
D20Joint Color GroupNo 1 Donghai Third Avenue, Pharm ParkDuqiao Town, Linhai CityZhejiang ProvincePR ChinaWebsite: www.jointcolor.comJointColor group has more than 25 years'
experience of manufacturing pearl and
glitter pigments. JointColor is the only
one for both pearl and glitter pigments
from China.
JointColor has two pearl pigments factories
and one glitter factory. JointColor insists
on investing in new technology and
professional QC system consistently.
JointColor produces and offers high quality
unique special effects, as well as normal
colour series. JointColor weather resistant
grade pearl pigments, cosmetic grade pearl
and glitter pigments have been approved
and used by lots of global customers for
many years already, all of them bringing
added value to JointColor customers final
products. Co-exhibiting with Harco Group.
M3CJordan Carbonate Company
PO Box 1059, 15 Abdulwehab Al Majali Street, ShmesaniAmman 11118 JordanTel: +96 2 566 5517Fax: +96 2 566 4668Email: [email protected]: www.jordancarbonate.comStand contact: Mr Firas Al GhusseinJordan Carbonate Company, established in
1979, is a major producer and exporter of
various grades of calcium carbonate natural
and treated with production capacity of
400,000t/yr, 80% of sales are exported
to 30 countries and it is associated with
Saudi Carbonate Co and Green Egypt Co
and has had a JV with Omya International
since 2004.
F27Kempro Kimyasal Maddeler Ve Dis Ticaret ASBirlik Organize Sanayi Bolgesi 1Cadde No: 22 Aydinli Mevkii 34953 TuzlaIstanbulTurkeyTel: +90 216 416 3449Fax: +90 216 361 8349Email: [email protected]
F9KH Chemicals BVScheepmakerij 260 Zwijndrecht 3331 MB The NetherlandsTel: +31 78 625 5268Email: [email protected]: www.khchemicals.comStand contact: Jeroen SegboerEuropean supplier with branches in the
UAE, China, Russia and Ukraine. Active
in chemicals used in paints, coatings,
resins, printing inks and adhesives. Strong
in various hydrocarbon and chemical
solvents, acrylates and monomers as
xylene, butylglycol, pm, pma, solvent
naphtha, acetone, mek, butyl acrylate,
acrylic acid, glycerine, IPA and butac.
A9Kingstone Chemical China Co LtdRm 710, No 101, Nanmatou Road Pudong Shanghai 200125 PR ChinaTel: +86 21 6182 0872Email: [email protected]: www.kingstonechemical.comStand contact: Liu HongjiangKingstone Chemical China is a professional
suppplier of dry mix mortar additives,
cellulose ether (HPMC), redispersible
powder and starch ether. It always
pursues stable quality, moderate price and
perfect service.
F5Konika MinoltaCo-exhibiting with Venktron DMCC.
D3KratonTransistorstraat 16Almere 1322CEThe NetherlandsTel: +31 36 546 2974Email: [email protected] formerly known as Arizona Chemical
is the leading producer and bio-refiner of
pine chemicals, supplying the chemical
Intermediate market with products made
from renewable resources. Kraton provides
numerous sustainable raw materials to
enable many industries, such as coatings,
lubricants, metal working fluids, fuel
additives, mining and oil fields.
J18Kuraray Asia Pacific Pte Ltd
A2Laikera InternationalAl Kazim BuildingBlock B, Office: 113, Abuhail PO Box 90085, DubaiUAETel: +971 (4) 269 5577 Email: [email protected]
A11Luan Jietongda Chemical Co Ltd15 Li Dun, Northern Luan City, Anhui Province, PR ChinaTel: +86 564 371 1165Email: [email protected]: www.jietondachem.comStand contact: Kevin ZhouThe leading developer and manufacturer
of powder coating additives in China,
its products include, matting agent,
matting hardener, curing agent, wax
modifier, accelerator, texture agent,
charge enhancing agent and other special
functional additives.
B03Luxi Chemical Group Co LtdNew Chemical Materials Industrial Park, High Tech Industrial Development Zone of Liaocheng CityShandong Province 252211PR ChinaTel: +86 635 348 7663Email: [email protected]: www.en.luxichemical.com
C11 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
Stand contact: Xiao ZhengtaoLuxi Group is a large state-owned
enterprise, established in 1992 with 7km2
industrial park. A qualified manufacturer
of methylene chloride, formic acid,
melamine, calcium chloride, sodium
formate, Benzyl chloride, Benzyl alcohol,
DMF, 2-Ethylhexanol, Cyclohexanone,
Perchloromethane, Trichloromethane,
Nylon 6, Polycarbonate.
J25ALy PontRoad No 1, Dawei Science and Technology Area, WenzhouZhejiang 325006PR ChinaTel: +86 577 8618 0685Mobile: +86 132 5097 1898Email: [email protected]: www.lypont.comStand contact: RockIt is China's top three powder coatings
factory specialising in qualified
powder coatings.
B1Manaseer CarbonateC/o Modern Cement & Mining CompanyKing Abdullah 11 St 302, PO Box 141414JordanTel: +962 79 7377779Email: [email protected]
F11Maple Powder Machines Co LtdNo 20 Hefei Road, YTETDZ, Yantai City ShandongPR ChinaTel: +86 535 6953 678Email: [email protected]: www.powdermachines.comStand contact: Zheng TaoA qualified supplier of powder coating
machines, owns a high-level technical
team, which masters advanced technology
and design theory of powder coating
processing line, mixer, extruder, cooling
crusher, grinder etc.
F13Mirodur SpAVia Delle Scienze 3Rome 04011ItalyTel: +39 0692 81746Fax: +39 0692 80644Email: [email protected]: www.turbomill.comStand contact: Massimo VitelliMirodur will exhibit:
Turbomill the unique rotating basket mill,
the fastest in grinding times, the easiest
in cleaning. Complete colour changes
are possible in 10min with the use of
very little solvent. Actually sold in 70
countries worldwide.
Industrial and anticorrosion coatings.
G9Molbase (Shanghai) Biotechnology Co Ltd5F, Building 12, No 1001 North Qingzhou Road, Shanghai 201109PR ChinaTel: +86 400 7281 666Email: [email protected]: www.molbase.cnStand contact: Jifeng DongMolbase, founded in April 2013, has
become a global leading chemical B2B
e-commerce platform. Plastic as a final
chemical industry is the main industry on
which it focuses. It offers raw materials,
including titanium dioxide, resin, additives,
fillers and etc. As an integrated B2B
e-commerce platform, it offers one-stop
solutions for plastic industry customers.
L9MPC ProkimRue Mhamedia - Zone Industrielle El Mghira Bp 175 Fouchana, Ben Arou 2082 TunisiaTel: +216 7940 8222Fax: +216 7940 8144Email: [email protected]: www.mpcprokim.comStand contact: Mohamed Khalil BourogaaMPC Prokim is an industrial company
based in Tunisia that operates in the
chemical industry of polymers. It
specialises in the production and marketing
of alkyd resins, aqueous emulsions and
polyesters, intended primarily for the paint
industry, glue and composites.
F15Nantong Guangcheng Chemical Co Ltd
H3Nanyang Lingbao Pearl Pigment Co Ltd
N3National Paints Factories Co LtdPO Box 261443, Jafza near Cargo Terminal 3Dubai UAETel: +971 4 883 9433Fax: +971 4 883 9434Email: [email protected]
Website: www.national-solvents.comStand contact: Gopal KanojiaNational Solvents FZCO Dubai was
established in 2008. It manufactures
polymer emulsion latex, such as styrene
acrylic, vinyl acrylic, pure acrylic, veova
co-polymer, PVA homopolymer, which
are widely used in paints, adhesives,
construction & chemical industries. National
Solvents is committed to provide the best
services with highest quality products.
Co-exhibiting with General Mineral
Industries Co.
N3National Solvents FZCOPO Box 261443, Jafza near Cargo Terminal 3Dubai UAETel: +971 4 883 9433Fax: +971 4 883 9434Email: [email protected]: www.national-solvents.comStand contact: Gopal KanojiaNational Solvents FZCO Dubai was
established in 2008. It manufactures
polymer emulsion latex, such as styrene
acrylic, vinyl acrylic, pure acrylic, veova
co-polymer, PVA homopolymer, which
are widely used in paints, adhesives,
construction & chemical industries. National
Solvents is committed to provide the best
services with highest quality products.
Co-exhibiting with General Mineral
Industries Co.
K7Netzsch Feinmahltechnik GmbHSedansstrasse 70D-95100 SelbGermanyTel: +49 9287 797 121Fax: +49 9287 797149Email: [email protected]
H10Wilhelm Niemann GmbH & CoNordlandstrasse 16 Melle 49326 GermanyTel: +49 5428 950.0Fax: +49 5428 950.199Email: [email protected]: www.niemann.deStand contact: Mr Frank NiemannProduction range:
Kreis-Dissolver® – Laboratory and
production dissolvers with 2.2-315kW for
batches of up to 15,000lit.
Kreis-Basket-Mill® – Laboratory and
production mills with 2.2-132kW for batches
C12 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
of up to 3000lit.
Kreis-Dissolver®-Butterfly – Production
butterfly dissolvers for ultra high-viscous
products with 15-90kW for batches of up
to 1500lit.
G4Nigtas Ltd STIKayseri Yolu Uzeri AtaSanayi Karsisi Hidirlik MevkiiNigdeTurkeyTel: +90 388 214 1500Email: [email protected]
E6Nitro Chemical Industry Ltd24 Rama I Road, Rongmuang Pathumwan 10330ThailandTel: +66 2 2145275Fax: +66 2 2159282Email: [email protected]: www.nitrochemical.comStand contact: Mr Pakorn WeerasombutNitrochemical Industry Ltd, Thailand offers
customers the best quality of nitrocellulose
for use in the lacquers for wood, paper,
coating, printing ink, aircraft lacquer,
protective lacquer, aluminium foil coating
etc. Nitro Chemical Industry supplies two
kinds of nitrocellulose ‘SS’ and ‘RS’ grades
with various viscosities upon its application.
Co-exhibiting with ABC Chemical Exports.
E6Nobel NC Co Ltd24 Rama 1 Road, Rongmuang Pathumwan 10330ThailandTel: +66 2613 8923Fax: +66 2216 3992Email: [email protected]: www.nitrocellulose.comStand contact: Mr Pakorn WeerasombutNobel NC is one of the world's largest
manufacturers of industrial nitrocellulose
in Thailand. The unique granular format
of Nobel nitrocellulose gives superb flow
characteristics to use in inks and coatings.
It is easy to handle and virtually dust free,
displaying minimum solvent migration
during transport and storage. Co-exhibiting
with ABC Chemical Exports.
B15Oliver y Batlle SACtra Mataró 39-47Badalona 08911SpainTel: +34 93 464 1010Fax: +34 93 464 3040
Email: [email protected]: www.oliverbatlle.comStand contact: Xavier VillanuevaOliver+Batlle is a leader in the production
of equipment for manufacturing and
packaging of paints, inks, varnishes,
adhesives, sealants, either water- or
solvent-based, on any scale. O+B offers
engineering and customised turnkey
solutions for the paint and allied industries.
F16Omnova Solutions SAS14 avenue des tropiques ZA de courtaboeuf 2Courtaboeuf, Essonne 91955FranceTel: +33 1 69 29 27 00Email: [email protected]: www.omnova.comStand contact: Nick HoltbyOmnova Solutions will present a broad
portfolio of coating resins and floor care
polymers (Pliolite®, Hydro Pliolite®, Plioway®,
Pliotec® And Mor-Glo®) that add valued
performance attributes to applications
that include exterior masonry, direct-
to-metal, stain blocking, intumescence,
waterproofing, as well as institutional floor
care. Visit www.omnova.com
M3AOmya International AG Baslerstrasse 42 Oftringen 4665 SwitzerlandTel: +41 79 392 63 93Email: [email protected]: www.omya.comStand contact: Jacques SteynOmya is a leading global producer of
industrial minerals, mainly fillers and
pigments, derived from calcium carbonate
and dolomite and a worldwide distributor
of speciality chemicals. Founded in 1884 in
Switzerland, Omya has a global presence
extending to 175 locations in more than 50
countries with 8000 employees.
E4Patcham (FZE)Saif Zone Plot C 4PO Box 7753 Sharjah 7753 UAETel: +971 655 70035Email: [email protected] contact: Mr Kaviesh KripalaniPatcham is a manufacturer of additives for
coatings and inks – a unique multifunctional
and multi compatible additive concept
combined with green and sustainable
chemistry. Additives include wetting and
dispersing agents, defoamers, slip and
levelling agents, rheology modifiers. Also
having paint driers and anti skinning agent.
F25Panzhihua Dongfang Titanium Industry Co LtdYizhishan Vanadium & Titanium Industrial ParkMiyi, Panzhihua CitySichuan 617201PR ChinaTel: +86 81 2810 1186
C9Perfect Polymers FZ-LLC
E7Potters EuropePontefract Road, Barnsley S71 1EJ UKTel: +44 1226 704516Fax: +44 1226 207615Email: [email protected]: www.potterseurope.comStand contact: Mr Jean-Philippe CurdyWith 23 plants worldwide, Potters is
the largest producer of hollow and solid
glass microspheres used as functional
fillers. Available in many particle sizes,
densities and strengths, these additives
are for improving mechanical, rheological
properties in thermoplastic and thermoset
formulations. Lightweight hollow spheres
allow simultaneous increased volumes and
reduced densities. Co-exhibiting with H.A.K
Industrial Chemicals (LLC) - a division of
The Kanoo Group.
E20Presafer (Qingyuan) Phosphor Chemical Co LimitedXiongxing Industrial Park, Qingyuan Hi-tech Industrial Development Zone, Guangdong 511540, PR ChinaTel: +86 763 312 9090Email: [email protected]: www.presafer.comStand contact: Shao MeilingA professional manufacturer of halogen-
free flame retardant for coating, textile,
potting, plastics.
K27Puyang Hongye Hi-Tech Development Co LtdTel: +86 393 878 7136Email: [email protected]: www.hyhitech.comStand contact: Mr Jack
C13 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
Puyang Hongye Hi-Tech Development Co
Ltd is the manufacturer and exporter of
Ester Alcohol C-12 and Ester Alcohol C-16
with USA's Technology, its annual output is
30,000t/yr Ester Alcohol-C12 and 8000t/
yr Ester Alcohol-C16. Contact: export@
hyhitech.com
A13Puyang Zhongke Xinyuan Petroleum Chemical Co LtdPuwang Industry Cluster AreaPuyang City, Henan Province 457000PR ChinaTel: +86 393 891 0876Fax: +86 393 611 8599Email: [email protected]: www.zkxychem.comStand contact: Lisa ZhangPuyang Zhongke Xinyuan Petroleum
Chemical Co Ltd sets scientific research,
production and sales in one private
scientific and technological enterprise.
Mainly produces C5 ,C9, C5/C9
hydrocarbon resins for road marking
paint, adhesive, rubber, printing ink and
paint industries.
K24Qingdao Echemi Technology Co Ltd5F Inter Royal Mansion, No 15 Donghai West Road, Qingdao, ShandongPR ChinaMobile: +86 131 5328 9417Email: [email protected]: www.echemi.comStand contact: Monica WongEchemi is a professional chemical
trading platform, to make your chemical
transaction easier. You could search the
information of thousands of products, such
as news, MSDS, and forecast of price
trend. More than 100,000 are waiting for
your searching. More than 3000 factories
are waiting for your contacting.
E20AQingdao Lanquens International Co LtdNo 10, Hong Kong Middle Road, Shinan District, Qingdao, ShandongPR ChinaTel: +86 532 8560 5952Email: [email protected]: www.lanquens.comStand contact: Jason LeeLanquens is one of the leading chemical
raw material suppliers in China, with more
than 10 years’ experience in organic
pigment and chemical auxiliary agents,
service for ink, coating and plastic industry.
G1Rainbow General Trading LLCPO Box 2409, New Industrial Area Ajman 2409UAETel: +971 674 37739Fax: +971 674 37740Email: [email protected]: www.rainbowchemical.comStand contact: Ranim OurabiRainbow Chemicals, a distributor of
chemicals across a multitude of industries,
has a history of 30 years in the Middle
East, Africa and South Asia. Collaborating
with manufacturers, such as Chemours,
Schulke, Organikkimya, Orgachem, Eternal,
Schwegmann, San Nopco, Hansol, HEAD,
Double Bond Chemical, Black Diamond,
CCP, Ruicheng and more.
E12RAR Resin & Chemical Industries1-Lake Plaza Jumeirah Lake TowersDubai 47381UAETel: +971 4 450 4286Fax: +971 4 450 4274Email: [email protected]: www.rarresin.comStand contact: Waldo BalitaanResin and solvents chemical Industries.
E8A, D9AReda Chemicals901 Al Manal TowerSheikh Zayed RoadPO Box 15004, DubaiUAETel: +971 4 332 5100
F12Resitan Co3rd Floor, No 5 Esfandiar AveVali-E-Asr AveTehran 19679-17191IranTel: +98 (21) 2202 0521-5Fax: +98 (21) 2202 0486Email: [email protected] contact: Mahtab VafaeiniaResitan Co was established in 1981 with
an annual production capacity of 75000t
of more than 130 types of industrial resins
in Iran.
The main products include: Phenolic &
foundry resins, bakelite, unsaturated &
saturated polyester resins, vinyl ester
resins, alkyd & modified alkyd resins, epoxy
ester resins, acrylic resins (water-based
& solvent-based), solid epoxy & polyester
resins, amino resins.
L3Rhopoint Instruments LtdRhopoint House, Enviro 21 Park Queensway Avenue SouthSt Leonards on SeaEast Sussex TN38 9AGUKTel: +44 (0)1424 739622Email: [email protected]: www.rhopointinstruments.comStand contact: Dawn MendezRhopoint Instruments manufactures
quality control test equipment for paints
and coatings.
Products include instruments for
measuring: gloss, haze, shade, opacity,
viscosity and MFFT (Minimum Film
Forming Temperature).
All products are manufacturerd in the
UK and conform to all relevant ISO and
ASTM standards.
K10RishiChem Mideast Ltd2903 Jumeirah Business Centre - 2 Cluster V, Jumeirah Lake Towers, DubaiUAETel: +971 04 4356867Fax: +971 04 4356866Email: [email protected]: www.rishichem.aeStand contact: Sumesh KumarRishiChem Mideast Ltd has been involved
in chemical distribution and trading for
more than 10 years with HO in Dubai and
a warehouse in Jebel Ali Free Zone. It
offers solutions for coating, ink, adhesives,
plastic, personal care, construction,
rubber and many other growing
industry segments.
M2Sancora Paints Industries Sdn BhdPamunting Perak 34600 MalaysiaTel: +60 16 877 7717
H6SantintRoom 2901, BM InterContinental Business Center, No 500 Hengfeng Road, ShanghaiPR ChinaTel: +86 021 6353 8710Email: [email protected]: www.santint.comStand contact: Tony ZhaoSantint is one of the top three leading
companies for tinting machines in industrial
paint. With 20 years of industrial expertise,
it is working together with global customers
and co-operators to create the future of the
C14 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
tinting industry by innovative technology.
M3BSaudi CarbonatePO Box 25679Riyadh 11476Kingdom of Saudi ArabiaTel: +966 1 265 2445
D20Schlenk Metallic Pigments GmbHWebsite: www.schlenk.deSchlenk Metallic Pigments is one of the
leading manufacturer of metallic pigments
for the coatings, printing inks and
plastics industry, as well as for technical
applications. Excellent aluminium and
gold bronze products in paste, powder or
granule form, as well as Vacuum Metallised
Pigments and press ready inks are tailor
made and are provided to customer with
an excellent performance. The Research
& Development, our technical and sales
departments ensure individual solutions
for our customers. Co-exhibiting with
Harco Group.
J26Shandong Jinhai Titanium Resources Technology Co Ltd Lubei High-tech Development Zone, Chengkou, Wudi, Binzhou, Shandong, 251909 PR ChinaTel: +86 543 645 6778Email: [email protected]: www.jinhaiti.cnStand contact: Wang zhenzhenA qualified supplier of titanium dioxide.
E15Shanghai ELE Mechanical & Electrical Equipment Co LtdNo 1609, Fengxing Road, Fengxi Huaxin Town, Shanghai 201705 PR ChinaTel: +86 21 5538 0043Email: [email protected]: www.elemix.cnStand contact: Katrina Melody DengELE is a top professional and qualified
supplier for all kinds of wet processing
equipment in China. It is committed to
manufacturing and marketing horizontal
bead mills, high shear homogenisers, high
speed dispersers, mixing reactors, turn-
key complete production lines, etc, widely
applied for paint, coating, ink, pigment,dyes
and so on.
G11Shanghai Farfly Energy Technology Co Ltd
H4Shanghai Jiuta Chemical Co LtdRm 1217, Building 5, No 26 Hexuan Road Shanghai 201800 PR ChinaTel: +86 21 5204 2175Email: [email protected]: www.shjiuta.comStand contact: Lucia TanThis company is one of the largest
suppliers of titanium dioxide in the world.
J17Shanghai Sower Mechanical & Electrical Equipment Co LtdRoom 2901, BM InterContinental Business Center, No 500 Hengfeng Road, ShanghaiPR ChinaTel: +86 021 6353 8710Email: [email protected]: www.sowerchina.comStand contact: Yang FangA qualified manufacturer of equipment
for liquids.
H9Shanghai Yipin Pigments Co Ltd4839 Jiasongbei RoadJiading DistrictShanghai 201814PR ChinaTel: +86 21 5950 4700Fax: +86 21 5950 4647Email: [email protected]
A5Shanghai Yuejiang Titanium Chemical Manufacturer Co Ltd7th Floor, No 355 Changyang RdShanghai 200082PR ChinaTel: +86 21 6513 2050Fax: +86 21 5509 3017Email: [email protected]: www.yuejiangchem.comStand contact: Ms Shine XuShanghai Yuejiang Titanium Chemical
mainly produces white pigments as titanium
dioxide rutile & anatase, lithopone, barium
sulphate, kaolin, yielding 300,000tons/
yr. With 30 years’ experience, 70% of its
products are exported. The world’s top
500 companies like BASF, Ennis Paint are
its customers.
K26Shanxi Fulihua Chemical Materials Co LtdRM 811, Steel Building, No 188, Xinghua Street, Taiyuan Shanxi 030027PR ChinaTel: +86 351 658 7855Email: [email protected]: www.sxflh.comStand contact: George LiuShanxi Fulihua Chemical Materials Co Ltd
was founded in 2002 and is a professional
manufacturer of carbon black. The carbon
black is widely used in coating, ink, leather,
plastic, chemical fibre and other industries,
with excellent characteristics, such as
high blackness and tinting strength, good
dispersion ability.
D20Shepherd ColorShepherd Color produces a wide range of
high-performance complex inorganic color
pigments used in the coatings industry.
These pigments are an extraordinary class
of traditional metal oxide materials that
offer stable, long-lasting colour for many
applications. Also, they have unbeatable
weatherability, heat and chemical
resistance, are non-warping and easy
to disperse. Rely on Shepherd Color to
'brighten your life' with quality products and
the latest innovations.
Co-exhibiting with Harco Group.
A4Shifang Taifeng New Flame Retardant Co LtdNo 66 Jiancai Rd, Chengdu 610051 PR ChinaTel: +86 28 8472 1008Fax: +86 28 8472 1009Email: [email protected]: www.taifeng-fr.comStand contact: Wesley WuA professional manufacturer of ammonium
polyphosphate flame retardant for coatings.
Dedicated in producing halogen-free
intumescent flame retardant based on
ammonium polyphosphate since 2001.
G18 Sichuan Lomon Titanum Industry Co Ltd23 Gaopeng Rd, Hi-Tech Zone Chengdu Sichuan 610041PR ChinaTel: +86 028 8518 2572Email: [email protected]: www.lomon.comStand contact: Jun ZhuTitanium dioxide.
C15 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
K28 Sinoti/TonghuiB-10/F, Huandao Office Building, No 1 4th Haikou, Hainan 570208PR ChinaTel: +86 898 6628 8041Email: [email protected]: www.hnsinoti.comStand contact: Zhang NingSinoti provides raw materials for UPR
resins, paints, coatings, ink etc, such as
DEPT, DMA, DEA, TiO2, MA. For more
information contact: [email protected];
F6BSolvochem FZCOJebel Ali Free Zone R/A 8, opp McDermott Dubai 17616 UAETel: +971 506 55 8638Email: [email protected]: www.solvochem.comStand contact: Eugenia KrasnokSolvochem is one of the leading
distributors in the Middle East, with offices
and distribution warehouses that are
strategically located in the Middle East
region to serve the same. Its customer
base includes manufacturing sectors,
such as oilfield, paints, lubricants, foam,
chemicals, adhesives, construction etc.
For more information, please visit www.
solvochem.com
H15Sozer Makina San Tic Ltd STIKocaeli Imes Organize Sanayi Bolgesi Imes 5 Caddesi No 7 Cerkesli - DilovasKocaeli 41155TurkeyTel: +90 262 722 9255Fax: +90 262 722 9265Email: [email protected]: www.sozer.comStand contact: Ali Emre SozerSozer Machine Industry and Trade Limited
Company was founded in 1946. Sozer
has been oriented, especially to paint and
chemical industry, since 1970. There are
high speed dissolvers, basket-mills, perl-
mills, planetary paste mixing machines, Zet
type kneaders, product filling and weighing
machines, dissolver high shear propellers
and vessels in the product range.
E11Synthomer Middle EastOffice E201, Building 2, East WingDubai Airport Free ZoneDubai 54645
UAETel: +971 507 765610Email: [email protected]: www.synthomer.comStand contact: Nabeel AhmedSynthomer is one of the world's
leading waterborne speciality polymer
manufacturers, offering a broad range of
chemistry for the coatings, construction
and adhesives industries, including
acrylics, vinyl acetate copolymers, styrene
butadiene rubber, polychloroprene and
redispersible powder.
Synthomer operates from 24 production
sites worldwide, including Dammam
and Dubai.
C1TasneePO Box 26707Riyadh 11496Saudi ArabiaTel: +966 114 174 122Email: [email protected]: www.tasnee.comStand contact: Khalid Al-AmariThe National Industrialisation Company
(Tasnee) is fully integrated with a wide range
of interests in petrochemicals, chemicals,
plastics, metals manufacturing, industrial
services and environmental technologies.
With 8000 employees on five continents,
Tasnee and its subsidiaries have an
outstanding record of providing innovative
products and services for a variety
of industries.
Co-exhibiting with Cristal.
J3Tianjin Jiateng Chemical ProductsCo LtdFive Floor of C10 West Building Entrepreneurial HeadquartersFuyuan Road, Wuqing Development Zone TianjinPR ChinaTel: +86 022 2298 5281Email: [email protected]: www.tjjtchem.comStand contact: Chen JingTianjin Jiateng Chemical Products is
perennially engaged in exporting Methyl
Ethyl Ketone (MEK), Methyl Isobutyl Ketone
(MIBK), Cyclohexanone (CYC), N,N-
Dimethylformamide (DMF), Ethyl Acetate
(EAC) and Toluene-2,4-diisocyanate (TDI),
as well as other chemical products and
related raw materials. It has had a good
relationship of co-operation with CNPC,
Sinopec, CNOOC, AkzoNobel NV and The
Valspar Corporation for many years.
H2Tinting Systems CompanyPO Box: 3250, Ammara Street, Old Industrial AreaKhamis Mushayt, Aseer 61961Saudi ArabiaTel: +966 1723 88000Fax: +966 1723 82561Email: [email protected]: www.tsccolor.comStand contact: Mr Mohammed Shabbir HussainTinting Systems Company is a one-stop
tinting solutions provider for the paint,
coating and composite industry. It has
been serving customers in the MENA, Asia
Pacific regions for more than a decade and
established a benchmark in the industry
through its wide variety of POS colourants
and in-plant pigment pastes.
C15BTongling Jintai Chemical Industrial Co LtdRecycling Industrial Park of Tongling Nonferrous Metals Group, Tongling City Anhui Province 264000PR ChinaTel: +86 562 586 8412Email: [email protected]: www.tljthg.com.cnStand contact: Wang XiuqingA qualified manufacturer of dimethyl
carbonate, propylene glycol, diethyl
carbonate, ethyl methyl carbonate,
dipropylene glycol, tripropylene glycol
and battery grade carbonates. Among
them, annual output of 120,000 tons of
dimethyl carbonate and 100,000 tons of
propylene glycol.
D18Toyobo Stc Co Ltd2-2-8 Dojimahama, Kita-KOsaka 530-0004JapanTel: +81 6 4797 5430Fax: +81 6 4797 5432Email: [email protected]: www.toyobo.co.jp/vylon/eStand contact: Mr Junichi TanimotoToyobo Stc Co Ltd is a chemical trade
company in Japan.
Exhibiting one of its products Vylon®, a
co-polyester resin, which gives an excellent
adhesion to various substrates, such as
plastics and metals.
Suitable for film coatings, adhesives, paints
for various applications.
Co-exhibiting with Toyobo Co Ltd.
C16 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
F5TQCCo-exhibiting with Venktron DMCC.
F30Ukseung Chemical Co Ltd
A8Unilex Colours & Chemicals Ltd106-107 Advent Atria, Chincholi Bunder Road, Malad (West) Mumbai, Maharashatra 400064 IndiaTel: +91 22 2881 1818Fax: +91 22 2888 5664Email: [email protected]: www.phthalocyaninepigments.comStand contact: Kabir Sharma and Dinesh LodariaFounded in 1993, Unilex Colours &
Chemicals is a manufacturer and exporter
of pigments and dyes. Currently, exporting
to the Middle East, South East Asia,
Europe etc. It always pursues the principles
of quality, consistency, reputation and
service. It is an ISO 9001: 2008 certified
company. Blue and green pigments
REACH compliant.
K6Union Colours LtdUnion House, Hempshaw LaneStockport, Cheshire SK1 4LGUKTel: +44 9172 392 1111Email: [email protected]: www.unioncolours.comStand contact: Oliver PfefferkornUnion Colours is a division of Longyu
Pigments and Chemicals, the largest
organic pigment producer in Asia. Its
development capabilities in three technical
centres, spread worldwide, are substantial
and products are manufactured in China
and South Africa. Its strength is based on
its experience and understanding of its
clients' businesses.
D12Unique Chemical LimitedC3 Room, 19F Shangmao Century Plaza, Nanjing, Jiangsu 210005 PR ChinaTel: +86 25 86887430Email: [email protected]: www.uniquechemical-nj.comStand contact: Wang DengdiA qualified supplier of pigments, dye stuff
and intermediates.
F5Venktron DMCC
B2Vibfast Pigments Pvt Ltd
F7Vibro-Mac SrlVia Primo Maggio, 2/4 San Zenone al Lambro, Milan 20070 ItalyTel: +39 02 9826 4390Fax: +39 02 9826 4392Email: [email protected]: www.vibromac.itStand contact: Mr Marco GerosaVibro-Mac was established in 1968 and
since then it has been specialising in
the planning, design and manufacture
of process machinery. As well as single
machines it deals with the production
of complete 'Turnkey' plants for the
manufacture of products within the
following industries: paints, varnishes, inks,
putties, sealants, agro-chemical products.
G6Vinavil Egypt For Chemicals66 Kornish Elnil StreetMaadi, CairoEgyptTel: +20 10 2601 2121Email: [email protected]
H1Visen Polymer FZE1E - 03D, Hamriyah Free Zone, Sharjah UAE Tel: +971 6 526 0604Email: [email protected]: www.visen.netStand contact: Mr Vijay S NairManufacturer of polymer emulsions
comprising of VAM homopolymers,
VAM-copolymers, VAM ter polymers,
styrene acrylic emulsions, pure acrylic
emulsions, elastomeric binders, acrylic
thickeners, dispersing agents, opacifiers for
coating applications.
F6Wacker Chemicals Middle East FZEPO Box 341071, Dubai Silicon OasisDubai 341071UAETel: +971 4 709 9999Fax: +971 4 709 9911Email: [email protected]: www.wacker.com/cms/en/mea/mea_home/home.jspWacker is a globally active chemical group
headquartered in Munich, Germany.
Wacker Chemicals Middle East, established
in Dubai in 1999, is accompanied
by Wacker Academy Dubai, offering
training programmes tailored to the
region's key trends and the ultramodern
Technical Center Labs that enables
testing of construction chemicals and
coatings applications.
B9Willy A Bachofen AG, Maschinenfabrik (WAB)Junkermattstrasse 11 CH-4132 Muttenz 1SwitzerlandTel: +41 61 686 7100Email: [email protected]: www.wab.chStand contact: Mr Dominik Von Arb, Area Sales ManagerWilly A Bachofen AG specialises in wet
grinding for more than 40 years and offers
worldwide its renowned Dyno-Mill modern
tools and process knowledge. The ECM-
AP SERIES allows power consumption
saving, cleaning media and production
time. WAB’s international service net
remains at clients' disposal whenever
grinding expertise is required. Co-exhibiting
with Al Shihab Al Thahabi Tr Co LLC.
C15HWuhan Shine Technology Co LtdRoom 2601, Building 2, Duhuixuan Square, No 7, 4th Jianghan Road Jianghan District, Wuhan, HubeiPR ChinaTel: +86 27 8277 0893Email: [email protected]: www.shinechems.comStand contact: Liu HuiA qualified supplier of optical brightener
agent: OB, OB-1, BBU, CBS-X, KCB, KSN;
Solvent dyes: solvent red 24, solvent yellow
14, solvent green 5, solvent blue 35; Metal
complex dyes: solvent yellow 21, solvent
red 49, black 27; Organic pigments: yellow
151, orange 64, Red 185.
B8X-Rite Europe GmbHAlthardstrasse 70 8105, RegensdorfSwitzerlandTel: +39 057 452 7755Email: [email protected]: www.fast-fluid.comStand contact: Mr Simone Viscomi, Sales Director - Turkey and MEAX-Rite is the global leader in colour science
and technology. The company, which now
includes design industry colour leader
Pantone, Inc, develops, manufactures,
C17 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
markets and supports innovative colour
solutions through measurement systems,
software, color standards and services.
Co-exhibiting with Al Shihab Al Thahabi Tr
Co LLC.
J10Yantai Fenglin Advanced Materials Co LtdLevel 11, CITIC Tower, Changjiang Rd ETDZ, Shandong 264000PR ChinaMobile: +86 156 5356 1885Email: [email protected]: www.fenglin.com.cnStand contact: Pengfei ChengFenglin is a leading supplier of polyester
resins for powder coatings. It
is recognised as one of the most active
participants in the global market. With
two manufacturing and two R&D facilities
in Yantai, it is committed to offering high
quality and innovative products to its
customers; it provides strong support in
product and coating solutions, and helping
them to achieve cost advantages.
B11AYantai Meicheng Advanced Materials Co Ltd#1202 Huanghai Mingzhu, No 63 Guanhai Rd, Laishan, Yantai, Shandong PR ChinaTel: +86 535 6397 472Email: [email protected]: www.meichengresins.comStand contact: Wang ChaoPolyester resin & epoxy resin for
powder coating.
F29Yantai Pushine International Trade Co LtdRoom 632, International Commodity Exhibition Center, Yantai Bonded Port Zhifu District, Yantai CityShandong Province 264000PR ChinaTel: +86 138 6381 1610Email: [email protected]: www.lzsyhj.en.alibaba.comStand contact: Mr XiaYantai Pushine International Trading is a
company committed to the production
and development of chemical machinery,
building materials machinery and plastic
machinery. With convenient transportation
and technical team, products are mainly
exported to the Middle East, Southeast
Asia, South America, Africa, Europe and
other regions.
F26Yantai Yuanli Machinery Manufacturing Co Ltd
E10Yillong Chemical Group LtdFeilo Plaza 602/6F, No 398 YongHe RdShanghai 200072PR ChinaTel: +86 (21) 6526 6643Email: [email protected]: www.yil-long.comStand contact: OsmanSince its founding in 1997 in Hong Kong,
Yil-Long Chemical has become one of the
leading chemical raw material suppliers
for construction chemicals and coatings
industry with its well established local
distribution network in 53 countries. It is
proud to have developed the following well-
known brands: Celocell, Esterol, Bentogel,
Feonox, Optisil, blanc fixé L, Tionox
and Redipol.
L6Yokes Makina San Tic Ltd StiITOB Organize Sanayi Bolgesi 10005 Sok No 46 Tekeli, Menderes Izmir 35470TurkeyTel: +90 532 137 1445Email: [email protected]: www.yokes.com.trStand contact: Pinar YokesYokes is a Turkish company, established
in 1943 and specialised in pilot and
production scale machinery manufacturing
for the chemical, paint & dyestuff, printing
inks, pharmaceutical, agricultural and
cosmetic industries for: Mixing, dispersing,
micro wet grinding processes, gear type
feeding, transfer pumps, filtering systems
and engineering studies.
K13Ystral GmbH Maschinenbau + ProcesstechnikWettelbrunner Str 7Ballrechten-Dottingen 79282GermanyTel: +49 (0)7634 5603 0Fax: +49 (0)7634 5603 99Email: [email protected]: www.ystral.comStand contact: Mr Dominik Seeger110% Mixing Solutions
With its comprehensive knowledge and
long-time experience as a manufacturer
of machines and processing systems
Ystral develops solutions together with its
customers for their specific application.
Talk to the experts and get to know the
Ystral Conti-TDS Technology – the No 1 in
powder wetting.
J6Zen FZEPO Box 122505, Saif Zone, SharjahUAETel: +971 6 557 5030
G10 Zhejiang Coloray Technology Development Co LtdNo 151 Huishan Road, Deqing Economic and Technological Development Zone Huzhou City, ZhejiangPR ChinaTel: +86 572 883 2188Email: [email protected]: www.coloray.ccStand contact: Hu ChangyanA leading manufacturer of pearlescent and
effect pigments in China.
D16Zhejiang Hongyu New Materials Co LtdSi'an Economic Developing Zone Changxing County, Zhejiang Province PR ChinaMobile: +86 136 6572 6353Email: [email protected]: www.hybentonite.comStand contact: Jessie LiuOrganoclay rheological additive, water-
based bentonite, activated bleaching earth.
J4Zhejiang Jinkun Zirconia Industry Co Ltd1399 Jingliu Rd, Linjiang Industrial Park Dajiangdong HangzhouZhejiang 311225PR ChinaMobile: +86 180 6791 8855Email: [email protected] contact: Fan MeikeA Sino-German joint venture with
ISO9001:2008 certified, has been
dedicated to the manufacture of zirconia
grinding beads, zirconia powder
for decades.
C18 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
MIDDLE EAST COATINGS SHOW 2017This event is organised by the Coatings Group, dmg :: events, publisher
of the leading publications in the coatings industry, Polymers Paint Colour Journal (PPCJ) and Asia Pacific Coatings Journal (APCJ)
EXHIBITION OPENING TIMES:
Monday, March 13, 2017 10:00 – 18:00
Tuesday, March 14, 2017 10:00 – 18:00
Wednesday, March 15, 2017 10:00 – 15:00
EXHIBITORSCOMPANY STAND ABC CHEMICAL EXPORTS PVT LTD .....................................E6
AGC CHEMICALS EUROPE ................................................. F19
AKKIM YAPI KIMYASALLARI SAN VE TIC.A.S. ....................C19
AL KHOWAHIR CHEMICALS ................................................ K8
AL SHIHAB AL THAHABI TR LLC ................................... B8, B9
ANADOLU MIKRONIZE MADECILIK SAN VE TIC AS ............ K5
ANHUI HENGYUAN CHEMICAL CO LTD ............................ G15
ANHUI SHENJIAN NEW MATERIALS CO LTD .....................B12
ANICHEM FZCO ................................................................... C6
ANQING HONGYU CHEMICAL CO LTD .............................. E16
ASHA PENN COLOR PVT LTD ...............................................E6
ATP ENGINEERING BV ..........................................................E3
AXCENTIVE SARL ............................................................... D20
BEVS INDUSTRIAL CO LTD ................................................... J5
BIP (OLDBURY) LTD ..............................................................E6
BIUGED LABORATORY INSTRUMENTS (GUANGZHOU) ......A1
BLACK DIAMOND MATERIAL SCIENCE CO LTD ................ C15
BODO MOLLER CHEMIE MIDDLE EAST FZE ....................... G5
BONYAN KALA CHEMIE ........................................................ L4
BRILLIANT GROUP INC ......................................................... F1
BÜHLER DMCC ..................................................................... L7
CABOT SPECIALTY CHEMICALS INC ...................................E7
CHANGZHOU LONGXIN MACHINERY CO LTD ................... K18
CHEMFILT. ............................................................................J16
CHEMICAL MARKETING & DISTRIBUTION .......................... C5
CHEMIELAND INTERNATIONAL CO LIMITED ...................E18A
CHEMOURS INTERNATIONAL OPERATIONS SARL ............ G1
CHEMPROBE CHEMICAL CO LTD ..................................... H1C
CLEAN BLAST INTERNATIONAL .......................................... B4
COATINGS GROUP ............................................................. B48
COMEC SRL .........................................................................D11
COPRABEL SA ......................................................................E8
COVESTRO .......................................................................... F17
CRISTAL ................................................................................C1
CRISTOFORO TIXE D'ARENZANO SRL ...............................D15
DATACOLOR AG EUROPE ................................................... A10
DEFELSKO CORPORATION .................................................. B4
DEQING TONGCHEM CO LTD ............................................ G10
DE VREE .............................................................................. F24
DIAF PILVAD A/S .................................................................. F31
DROMONT SRL ................................................................... D11
DYNACOLOUR (ASIA PACIFIC) SDN BHD .......................... F31
DYNAMECH INDUSTRIES (M) SDN BHD ............................. F31
ECOD SPECIALTIES (WUHAN) CO LTD ............................ C15D
EGE KIMYA SAN VE TIC AS. ................................................ K16
EL-MOHANDES COMPANY ................................................. F32
EL ZAIN CHEMICALS COMPANY ..........................................A3
ERICHSEN GMBH & CO KG ..................................................E3
ESTERPOL PERFORMANCE RESINS ....................................F8
EUCHEMY INDUSTRY CO LTD ..............................................A7
EUROCHEM INTERNATIONAL FZE .................................... H1A
FAST & FLUID, THE TINTING COMPANY .............................. B8
FENCHEM BIOTEK LTD ....................................................... J24
FIRSTRUTH COLORANTS CHINA CO LTD ........................... D1
FUJIAN JINTAI FINE CHEMICAL CO LTD .............................B11
G&J RESOURCES ...............................................................C10
GALSTAFF MULTIRESINE SPA ............................................H13
GENERAL MINERAL INDUSTRIES CO ................................. N3
GREEN EGYPT CO .............................................................M3D
GUANGXI WUZHOU GOLDEN SPOT RESIN LTD .................. J1
GUANGZHOU JINZONG MACHINERY CO LTD .................G11A
GULMER MADENCILIK SAN VE TIC A.S. .............................L11
H.A.K INDUSTRIAL CHEMICALS (LLC) ..................................E7
HANGZHOU COLORING CHEMICAL CO LTD .......................E1
HANGZHOU FORWARD FINE CHEMICAL CO LTD .............. D4
HANGZHOU SYNOX PIGMENTS CO LTD ..............................K1
HARCO GROUP ................................................................. D20
HARIS AL AFAQ .................................................................... C7
HEFEI SUNRISE ALUMINIUM PIGMENTS CO LTD ..............H12
HENAN BOTAI CHEMICAL BUILDING MATERIALS CO LTD .. G3
HENAN GP CHEMICAL CO LTD ............................................ J2
HI-TECH MINERALS & CHEMICALS ....................................C16
HONGYE HOLDING GROUP .............................................. K27
HORIZON CHEMICALS TRADING .........................................B5
HORIZON FOR PLASTIC PRODUCTS CO ............................P2
HORMOZ POWDER ............................................................ F10
HOSOKAWA ALPINE AKTIENGESELLSCHAFT .....................N1
HUBEI GREENHOME FINE CHEMICAL CO LTD ...............C15C
HUBEI GURUN TECHNOLOGY ........................................... K25
HUZHOU MIZUDA BIOSCIENCE CO LTD ............................ F14
IEC PLANT ENGINEERING SDN BHD .................................K12
IMERYS MINERALS LTD ......................................................F6A
IMERYS TALC ..................................................................... D20
IMMEA SRL ...........................................................................F7
INDIAN CHEMICAL INDUSTRIES .......................................... C8
C19 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
Please note this list is subject to change – visit www.coatingsgroup.com for more information
INTER-CHINA CHEMICALS CO LTD ....................................H12
INTERMEDIATE CHEMICALS CO LTD ...................................E7
JANA - JUBAIL CHEMICAL INDUSTRIES COMPANY ............D9
JIANGSU GAXSN CHEMICAL CO LTD ................................ F14
JIANGSU GUOLIAN TECHNOLOGY CO LTD ....................... J13
JIANGSU TIANYIN CHEMICAL IND CO LTD ......................J28A
JIFTEX POLYMERS .......................................................... L1, L2
JINAN YUXING CHEMICAL CO LTD ....................................F33
JINTAI (M) SDN BHD ............................................................ F31
JOINT COLOR GROUP ....................................................... D20
JORDAN CARBONATE CO ................................................ M3C
KEMPRO KIMYASAL MADDELER VE DIS TICARET AS ....... F27
KH CHEMICALS BV ...............................................................F9
KINGSTONE CHEMICAL CHINA CO LTD ..............................A9
KONICA MINOLTA ..................................................................F5
KRATON ............................................................................... D3
KURARY ASIA PACIFIC PTE LTD ......................................... J18
LAIKERA INTERNTIONAL ......................................................A2
LUAN JIETONGDA CHEMICAL CO LTD ............................... A11
LUXI CHEMICAL GROUP CO LTD ........................................ B3
LY PONT ............................................................................J25A
MANASEER CARBONATE .....................................................B1
MAPLE POWDER MACHINES CO LTD ................................ F11
MIRODUR SPA......................................................................F13
MOLBASE (SHANGHAI) BIOTECHNOLOGY CO LTD ............ G9
MPC PROKIM ........................................................................L9
NANTONG GUANGCHENG CHEMICAL CO LTD ................. F15
NANYANG LINGBAO PEARL PIGMENT CO LTD .................. H3
NATIONAL PAINTS FACTORIES CO LTD .............................. N3
NATIONAL SOLVENTS FZCO ................................................ N3
NETZSCH - FEINMAHLTECHNIK GMBH .............................. K7
WILHELM NIEMANN GMBH & CO .......................................H10
NIGTAS LTD STI .................................................................... G4
NITRO CHEMICAL INDUSTRY LTD ........................................E6
NOBEL NC CO LTD ...............................................................E6
OLIVER Y BATLLE SA ..........................................................B15
OMNOVA SOLUTIONS SAS ................................................. F16
OMYA INTERNATIONAL AG ................................................M3A
PANZHIHUA DONGFANG TITANIUM INDUSTRY CO LTD .... F25
PATCHAM (FZE) .....................................................................E4
PERFECT POLYMERS FZ LLC .............................................. C9
PETROCHEM MIDDLE EAST ................................................ D5
POTTERS EUROPE ...............................................................E7
PRESAFER (QINGYUAN) PHOSPHOR CHEMICAL ...............E20
PUYANG HONGYE HI-TECH DEVELOPMENT CO LTD ...... K27
PUYANG ZHONGKE XINYUAN PETROLEUM CHEMICAL ... A13
QINGDAO ECHEMI TECHNOLOGY CO LTD ........................K24
QINGDAO LANQUENS INTERNATIONAL CO LTD ............ E20A
RAINBOW GENERAL TRADING LLC .................................... G1
RAR RESIN & CHEMICAL INDUSTRIES ............................... E12
REDA CHEMICALS .....................................................E8A, D9A
RESITAN CO .........................................................................F12
RHOPOINT INSTRUMENTS ................................................... L3
RISHICHEM MIDEAST LTD .................................................. K10
SANCORA PAINTS INDUSTRIES SDN BHD ......................... M2
SANTINT ............................................................................... H6
SAUDI CARBONATE ...........................................................M3B
SCHLENK METALLIC PIGMENTS GMBH ........................... D20
SHANDONG JINHAI TITANIUM RESOURCES TECHNOLOGY
CO LTD ............................................................................ J26
SHANGHAI ELE MECHANICAL & ELECTRICAL EQUIPMENT
CO LTD ............................................................................ E15
SHANGHAI FARFLY ENERGY TECHNOLOGY CO LTD ........G11
SHANGHAI JIUTA CHEMICAL CO LTD ................................. H4
SHANGHAI KINGSTONE CHEMICAL .....................................A9
SHANGHAI SOWER MECHANICAL & ELECTRICAL
EQUIPMENT CO LTD ....................................................... J17
SHANGHAI YIPIN PIGMENTS CO LTD ................................... H9
SHANGHAI YUEJIANG TITANIUM CHEMICAL CO LTD .........A5
SHANXI FULIHUA CHEMICAL MATERIALS CO LTD ........... K26
SHEPHERD COLOR ........................................................... D20
SHIFANG TAIFENG NEW FLAME RETARDANT CO LTD ........A4
SICHUAN LOMON TITANUM INDUSTRY CO LTD ............... G18
SINOTI/TONGHUI ............................................................... K28
SOLVOCHEM FZCO ............................................................ F6B
SOZER MAK VE TIC LTD STI ...............................................H15
SYNTHOMER MIDDLE EAST ............................................... E11
TASNEE ................................................................................ C1
TIANJIN JIATENG CHEMICAL PRODUCTS CO LTD .............. J3
TINTING SYSTEMS COMPANY .............................................H2
TONGLING JINTAI CHEMICAL INDUSTRIAL CO LTD ....... C15B
TOYOBO STC CO LTD .........................................................D18
TQC .......................................................................................F5
UKSEUNG CHEMICAL CO LTD ...........................................F30
UNILEX COLOURS & CHEMICALS LTD .................................A8
UNION COLOURS LTD ..........................................................K6
UNIQUE CHEMICAL LIMITED ..............................................D12
VENKTRON DMCC ...............................................................F5
VIBFAST PIGMENTS PVT LTD .............................................. B2
VIBRO-MAC SRL ................................................................... F7
VINAVIL EGYPT FOR CHEMICALS ........................................ G6
VISEN POLYMER FZE ........................................................... H1
WACKER CHEMICALS MIDDLE EAST FZE ............................F6
WILLY A BACHOFEN AG, MASCHINENFABRIK (WAB) ......... B9
WUHAN SHINE TECHNOLOGY CO LTD ........................... C15H
X-RITE EUROPE GMBH ........................................................ B8
YANTAI FENGLIN ADVANCED MATERIALS CO LTD ............ J10
YANTAI MEICHENG ADVANCED MATERIALS CO LTD ......B11A
YANTAI PUSHINE INTERNATIONAL TRADE CO LTD ...........F29
YANTAI YUANLI MACHINERY MANUFACTURING CO LTD ..F26
YILLONG CHEMICAL GROUP LTD ...................................... E10
YOKES MAKINA SAN TIC LTD STI .........................................L6
YSTRAL GMBH MASCHINENBAU & PROCESSTECHNIK ...K13
ZEN FZE ................................................................................. J6
ZHEJIANG COLORAY TECHNOLOGY DEVELOPMENT ..... G10
ZHEJIANG HONGYU NEW MATERIALS CO LTD .................D16
ZHEJIANG JINKUN ZIRCONIA INDUSTRY CO LTD ............... J4
SECTION REPORT
C20 PPCJ • Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
PRODUCT FINDER
ADDITIVESABC Chemical Exports Pvt LtdAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCAnichem FZCOAnhui Hengyuan Chemical Co LtdBiuged Instruments Co LtdDynamech IndustriesEge Kimya San ve Tic ASGalstaff Multiresine SpAH.A.K Industrial Chemicals (LLC)Hangzhou Synox Pigments Co LtdHenan Botai Chemical Building MaterialsHorizon ChemicalsHormoz Powder FZE CoMPC ProkimOmya International AGPuyang Zhongke Xinyuan Petroleum Chemical Co LtdRainbow General Trading LLCRAR Resin and Chemical IndustriesRishichem Mideast LtdShanghai Yuejiang Titanium Chemical ManufacturerShifang Taifeng New Flame Retardant Solvochem FZCOSynthomer Middle EastVisen Polymer FZEWacker Chemicals Middle East FZEYillong Chemical Group Ltd
ADHESIVES Akkim Yapı Kimyasalları San. ve Tic ASAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCAnhui Hengyuan Chemical Co LtdAnichem FZCOBiuged Instruments Co LtdCoprabelCovestroDromontDynamech IndustriesEl-Mohandes Company for Manufacturing and Trading Modern ChemicalsHenan Botai Chemical Building MaterialsHorizon ChemicalsKratonPuyang Zhongke Xinyuan Petroleum Chemical Co LtdRainbow General Trading LLCRAR Resin and Chemical IndustriesRishichem Mideast LtdShifang Taifeng New Flame RetardantSolvochem FZCOToyobo Co LtdWacker Chemicals Middle East FZE
BIOCIDESAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCH.A.K Industrial Chemicals (LLC)Horizon ChemicalsRainbow General Trading LLC
CHEMICALSABC Chemical Exports Pvt LtdAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCAnhui Hengyuan Chemical Co LtdAnichem FZCOBiuged Instruments Co LtdBonyan Kala Chemie CompanyChemfiltCoprabelCovestroDynamech IndustriesEl-Mohandes Company for Manufacturing and Trading Modern ChemicalsH.A.K Industrial Chemicals (LLC)
Hangzhou Synox Pigments Co LtdHenan Botai Chemical Building Materials Horizon ChemicalsHosokawa Alpine AktiengesellschaftKH ChemicalsMPC ProkimRainbow General Trading LLCRAR Resin and Chemical IndustriesResitan CoRishichem Mideast LtdShanghai Yuejiang Titanium Chemical ManufacturerShifang Taifeng New Flame RetardantSolvochem FZCOWacker Chemicals Middle East FZE
COLOUR, TINTING, FILLINGAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCBiuged Instruments Co LtdBühler AGChemfiltComec SrlCovestroDromontDynamech IndustriesHangzhou Synox Pigments Co LtdHormoz Powder FZE CoTinting Systems CompanyYillong Chemical Group Ltd
DISPERSIONSAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCBEVS Industrial Co LtdBiuged Instruments Co LtdBühler AGChemfiltComec SrlCovestroDynamech IndustriesH.A.K Industrial Chemicals (LLC)Henan Botai Chemical Building Materials Co LtdHorizon ChemicalsIndian Chemical IndustriesWilhelm Niemann GmbH & CoOmnova SolutionsOmya International AGRainbow General Trading LLCRishichem Mideast LtdSolvochem FZCOSynthomer Middle EastTinting Systems CompanyUnion Colours LtdVisen Polymer FZE
EXTENDERS & FILLERSAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCBühler AGComec SrlGeneral Mineral Industries CoH.A.K Industrial Chemicals (LLC)Horizon ChemicalsHormoz Powder FZE CoJordan Carbonate CiompanyOmya International AGRainbow General Trading LLCShanghai Yuejiang Titanium Chemical Manufacturer Co LtdWacker Chemicals Middle East FZEYillong Chemical Group Ltd
GLOSS & COLOURAGC Chemicals Europe LtdBEVS Industrial Co LtdBiuged Instruments Co LtdCoprabel
CovestroErichsen GmbH & Co KGHangzhou Synox Pigments Co LtdRainbow General Trading LLCRhopoint Instruments LtdRishichem Mideast LtdTinting Systems CompanyWacker Chemicals Middle East FZE
INKSAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCBiuged Instruments Co LtdBrilliant Group IncBühler AGChemfiltCoprabelDynamech IndustriesEge Kimya San ve Tic ASEl-Mohandes Company for Manufacturing and Trading Modern ChemicalsH.A.K Industrial Chemicals (LLC)Hangzhou Synox Pigments Co LtdHenan Botai Chemical Building Materials Co LtdHorizon ChemicalsHormoz Powder FZE CoKratonPuyang Zhongke Xinyuan Petroleum Chemical Co LtdRainbow General Trading LLCRishichem Mideast LtdSolvochem FZCOToyobo Co LtdWacker Chemicals Middle East FZE
PIGMENTSABC Chemical Exports Pvt LtdAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCBrilliant Group IncCoprabelCristalDynamech IndustriesEl-Mohandes Company for Manufacturing and Trading Modern ChemicalsG&J Resources IncH.A.K Industrial Chemicals (LLC)Hangzhou Synox Pigments Co LtdHenan Botai Chemical Building Materials Co LtdHorizon ChemicalsHormoz Powder FZE CoIndian Chemical IndustriesRainbow General Trading LLCRAR Resin and Chemical IndustriesRishichem Mideast LtdShanghai Yuejiang Titanium Chemical Manufacturer Co LtdTinting Systems CompanyUnilex Colours & Chemicals LtdUnion Colours LtdWacker Chemicals Middle East FZEYillong Chemical Group Ltd
PLANT & MACHINERYAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCBühler AGChangzhou Longxin Machinery Co LtdChemfiltComec SrlDe VreeDromontDynamech IndustriesGuangzhou Jinzong Machinery Co LtdHorizon ChemicalsMirodur SpAOliver y Batlle SAU
Sozer Makina San Tic Ltd StiVibro-Mac SrlYantai Pushine International Trade Co LtdYokes Makina San. Tic. Ltd. StiYstral GmbH Maschinenbau + Processtechnik
POWDER COATINGSAGC Chemicals Europe LtdAl Shihab Al Thahabi Tr Co LLCAnhui Hengyuan Chemical Co LtdAnhui Shenjian New Materials Co LtdBiuged Instruments Co LtdCoprabelDynamech IndustriesEl-Mohandes Company for Manufacturing and Trading Modern ChemicalsH.A.K Industrial Chemicals (LLC)Hangzhou Synox Pigments Co LtdHenan Botai Chemical Building Materials Co LtdHormoz Powder FZE CoHosokawa Alpine AktiengesellschaftRainbow General Trading LLCRishichem Mideast LtdWacker Chemicals Middle East FZEYillong Chemical Group Ltd
RESINSABC Chemical Exports Pvt LtdAGC Chemicals Europe LtdAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCAnhui Hengyuan Chemical Co LtdAnhui Shenjian New Materials Co LtdBiuged Instruments Co LtdBonyan Kala Chemie CompanyChemfiltCoprabelCovestroDynamech IndustriesEl-Mohandes Company for Manufacturing and Trading Modern ChemicalsGalstaff Multiresine SpAHangzhou Synox Pigments Co LtdHenan Botai Chemical Building Materials Co LtdHorizon ChemicalsHormoz Powder FZE CoJana - Jubail Chemical Industries CompanyJiftex PolymersKratonMPC ProkimOmnova SolutionsPuyang Zhongke Xinyuan Petroleum Chemical Co LtdRainbow General Trading LLCRAR Resin and Chemical IndustriesResitan CoToyobo Co LtdWacker Chemicals Middle East FZE
SOLVENTSABC Chemical Exports Pvt LtdAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCAnhui Hengyuan Chemical Co LtdAnichem FZCOBiuged Instruments Co LtdDynamech IndustriesEl-Mohandes Company for Manufacturing and Trading Modern ChemicalsHorizon ChemicalsKH ChemicalsKratonRainbow General Trading LLCRAR Resin and Chemical IndustriesSolvochem FZCO
SECTION REPORTDIRECTORYSECTION REPORT
C21 PPCJ • Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
PRODUCT FINDER
+44 (0)1737 [email protected] www.coatingsgroup.com
FOR UP-TO-DATE INFORMATION ON ANY OF THE ABOVE EVENTS, PLEASE
CONTACT THE COATINGS GROUP
DWTC, Dubai UAE 13 – 15 March 2017
CICC, Cairo, Egypt 11 – 12 October 2017
Balai Sidang Jakarta Convention Center, Indonesia 13 – 15 September 2017
InterContinental Hotel, Ho Chi Minh City, Vietnam 16 – 17 May 2017
Safari Park Hotel, Nairobi, Kenya
13 – 14 June 2017
Global links for coatings professionals
2 0 1 7 E V E N T S
Wacker Chemicals Middle East FZEYillong Chemical Group Ltd
TECHNICAL SERVICESAl Shihab Al Thahabi Tr Co LLCBiuged Instruments Co LtdBühler AGChemfi ltDynamech IndustriesHosokawa Alpine AktiengesellschaftRishichem Mideast LtdWacker Chemicals Middle East FZE
TEST EQUIPMENTAl Khowahir ChemicalsAl Shihab Al Thahabi Tr Co LLCBEVS Industrial Co LtdBiuged Instruments Co LtdDeFelsko CorporationDynamech IndustriesErichsen GmbH & Co. KGRhopoint Instruments LtdSozer Makina San Tic Ltd StiWacker Chemicals Middle East FZE
UV/EB TECHNOLOGYAl Shihab Al Thahabi Tr Co LLCBiuged Instruments Co LtdCovestroGalstaff Multiresine SpARishichem Mideast Ltd
VARNISHESAGC Chemicals Europe LtdBiuged Instruments Co LtdEl-Mohandes Company for Manufacturing and Trading Modern ChemicalsHangzhou Synox Pigments Co LtdHorizon ChemicalsRishichem Mideast Ltd
WAXESABC Chemical Exports Pvt LtdAl Shihab Al Thahabi Tr Co LLCDynamech IndustriesEl-Mohandes Company for Manufacturing and Trading Modern ChemicalsOmya International AGRishichem Mideast Ltd
OTHERSABC Chemical Exports Pvt Ltd – Packaging raw materialsAkkim Yapı Kimyasalları San. ve Tic AS – Waterproofi ng and coating technology; Surface preparation and repair systems; Rigid polyurethane systems; SealantsAl Shihab Al Thahabi Tr Co LLC – Paint & coating equipments; paint & coating machinery; mixing and dissolving equipment; homogeneous mixersspectrophotometersChangzhou Longxin Machinery Co Ltd – Sand mill, bead mill, nano mill, three roller mill, high speed mixerChemfi lt – Manufacturing plants and equipment for Chemicals, Dispersions, Colour, Tinting, Filling, Inks
and ResinsComec Srl – Concept engineeringCovestro – Raw material supplier for coatings, adhesives & specialitiesDatacolor AG Europe – Colour management solutionsDe Vree – Filling equipmentErichsen GmbH & Co KG – Scratch hardness; Film thickness; Abrasion resistance; Viscosity and consistencyHangzhou Synox Pigments Co Ltd – Concrete, cement, ceramic, enamel, glass, pabes, bricks, paint, mulch, rubber, asphalt, etcHorizon for Plastic Products Co – Plastic buckets manufacturerJana - Jubail Chemical Industries Company – Epoxy resins and hardenersJiftex Polymers – Water-based emulsion polymersMPC Prokim – Emulsions, polyestersNational Solvents Fzco – Manufacture of Latex (emulsion), (Vinyl acrylic/styrene acrylic/pure acrylic/vinyl acetate Veova) and barrel manufacture (steel & galvanised)Puyang Zhongke Xinyuan Petroleum Chemical Co Ltd – PaintTinting Systems Company – Machine colourants, Pigment concentrates, Pigment dispersionsToyobo Co Ltd – CoatingsWacker Chemicals Middle East FZE – Intelligent solutions in architectural coatings, printing inks, industrial coatings, paper & fi lm coatings, packaging coatings and wood coatings
Commission based sales agents are needed to carry out the following primary responsibilities in their local markets:-
Selling exhibition space, advertisement and sponsorships across all Coatings portfolio
dmg events is a wholly-owned subsidiary of the Daily Mail and General Trust plc, one of the largest media companies in the United Kingdom. The company runs more than 80 events in more than 25 countries each year. Due to business expansion, local agents are required for India for the Coatings Division.
coatings or chemical industry
Able to work in an unsupervised environment and experienced in time management
Self-motivated and target-driven
Who we are
Local Agents Wanted
Job Description:
Candidate Requirements:
If you are interested, please contact:-Mr Kez Chen Group Sales Director Quartz House, 20 Clarendon Road, Redhill, Surrey,
T: +44(0)1737 855107 F: +44(0)1737 855034
India
www.coatingsgroup.com
C23 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
Programme may be subject to change.
MARCH 13, 2017
Time Slot Day 1 Company Speaker Name Presentation Title
11.00-11.20 Wacker Sustainable thermal insulation: Solution for green building
11.30-11.50 G & J Resources Inc George Gendi Chinese TiO2 Industry and Market Overview and Introduction of
Yunnan Xinli
12.00-12.20 Oliver y Batlle Mrs Mara Belluco Oliver + Batlle coatings process solutions
12.30-12.50 Covestro Dr Dinesh Patel Polyurethane raw materials for construction
LUNCH BREAK
14.00-14.20 ystral GmbH Ms Selina Racz Application focused processes - Displacing conventional dispersing
systems with Inline Dispersing Technology
14.30-14.50 Mirodur SpA Massimo Vitelli Turbomill the unique rotating basket mill
15.00-15.20 Brooks Canada Inc Yostyn TBC
15.30-15.50 OCSiAL Private
Limited
Ravi Mohan Dabral Single wall carbon nano tubes for ESD Floorings
MARCH 14, 2017
Time Slot Day 2 Company Speaker Name Presentation Title
11.0-11.20 Atilim Makina Mohamed Mostafa Brief introduction about Atilim Makina
11.30-11.50 Synthomer Nabeel Ahmed Synthomer’s range of speciality dispersions
12.00-12.20 Petrochem
12.30-12.50 Tinting Systems
Company
Mr Faraz Shahid –
Technical Manager
Challenges of point-of-sale colourants
LUNCH BREAK
14.00-14.20 Kraton - Arizona Patrick Van Waes Sylfat* Tall Oil Fatty Acid as building block for high quality alkyd binders
14.30 14.50 AGC Chemicals
Europe
Dr Floris Kooistra Lumiflon, fluorinated resins for ultra-durable coatings
15.00-15.20 Sun Chemical Ltd Safraz Khan Barrier coatings for flexible packaging
15.30-15.50 Dromont Comec
Group
Marco Garello Total automated paint factory and bacteria analyser
EXHIBITOR BUSINESS PRESENTATIONS
March 13-14, 2017, within the Exhibition Hall
These presentations will take place on the first two days of the exhibition and admission is free
C24 Middle East Coatings Show 2017 Dubaiwww.coatingsgroup.com
Exhibition Catalogue
MA
RK
ETI
NG
SU
ITE
RO
OM
NTS
PR
AY
ER
CA
FE A
RE
NA
A01
A03
A04
A05
A06
A07
A08
A09
A11
A12
A13
A14
B01
B05
B09
B15
B21
P02
M02
L03
L01
K03
K02
K01
J03
J02
F05
F03
F01
E03
E01
D04
D03
D01
C01
C05
C09
C15
C22
D05
D09
a
D11
D15
D21
E06
E08 E12
E15 E21
F06a
F10
F16
F33
G01
G03
G08
G18
H01
a
H02
H16
J06
J10
J16
J26
J34
K07
K10
K18
K24
K33
L04
L07
L10
L13
L18
M03
a
M08
M12
M24
N04
N07
ENTR
AN
CE
SHEI
KH
SA
EED
HA
LL 1
ENTR
AN
CE
AR
ENA
LIN
KEN
TRA
NC
EA
REN
A
B06
B08
B10
B16
C08
C10
D09
D12
E08
a
E16
E17
E20
F07
F11
F12
F15
F19
F18
F17
F25
F24
F31
F30
F29
F28
F26
F27
G10
G11
G15
4
H03
H04
H06
H09
H10
H12
J11
J12
J17
J18
K11
a
M03
b
M03
cM
03d
J04
F14
E10
D16
D17
D19
D18
G02
L05a
F13
E11
G04
J14
E18
a E22
E20
aE
18
C15
d
C15
e
C15
aC15
bC15
c
C15
fC15
gC15
h
F08
K13
L09
H11
H15
F32
N03N
01
F09
J24
J25a
Bus
ines
sP
rese
ntat
ion
Are
aH
13
H05
H08
H07
B11
A10
J01
J05
K05
K06
C10
a
K16
K20
B03
K19
G14
B12
G11
a
B02
a
J25
F06
C07
a
K08
B11
a
E04
A02
H01
K26
K27
K29
J28a
K28
C11
K12
E07
F06b
L12a
L12
C16
K25
K24
G06
Pro
jex
Sea
ting
Are
a
Sea
ting
Are
a
Sal
es /
Exh
ibito
rLo
unge
E08
b
J13a
J13
L11
J28b
H01
b
D13
G05
C07
H01
c
G16
G09
J32
J33
G10
a
B04
L05
K02
a
C06
F32a
F08a
F15a
B02
B04
b
L06
F02
M04
M07
M11
M10
M06
K32
K31
K30
L17
L15
C21
C20
C19
D20
D12
a
K11MID
DLE
EAST
COA
TING
S SH
OW D
UBAI
201
7
AREN
A, L
INK
AND
SHEI
KH S
AEED
HAL
L 1,
DWTC
, DUB
AI, U
AE
كتالوج املعرض
C12 معرض الشرق األوسط للطالء 2017www.coatingsgroup.com
في ميونخ بأملانيا.أنشئت Wacker Chemicals Middle East في دبي في عام 1999، وترافقها Wacker Academy Dubai التي توفر برامج تدريبية مخصصة لالجتاهات الرئيسية باملنطقة، واتبرات
كنك من اختبار املركزية التقنية األكثر حداثة، التي متكيماويات البناء وتطبيقات الطالء.
B9Willy A Bachofen AG, Maschinenfabrik
(WAB)Junkermattstrasse 11, Ch-4132 Muttenz
سويسرا ,1هاتف: 41616867100+
[email protected] :بريد إلكترونيwww.wab.ch :موقع إلكتروني
جهة االتصال في منصة العرض: دومينيك فون أرب، Willy A Bachofen AG مدير مبيعات املنطقة تتخصصا، وتعرض معدات في الطحن الرطب منذ أكثر من 40 عام
احلديثة من طراز Dyno-Mill الشهيرة وخبرتها اخلاصة ECM-AP SERIES بالعمليات. تسمح منتجاتها من طراز
بتوفير استهالك الكهرباء ووسائل التنظيف ووقت اإلنتاج. تبقى شبكة اخلدمة الدولية التابعة لـ WAB حتت تصرف
العمالء عند طلبهم خلبراء الطحن الرطب. تشارك في Al Shihab Al Thahabi Tr. Co. LLC املعرض بالتعاون مع
C15HWuhan Shine Technology Co Ltd
Room 2601, Building 2, Duhuixuan Square, No 7, 4th Jianghan Road, Jianghan District, Wuhan, Hubei,
الصنيهاتف: 86-27-82770893+
[email protected] :بريد إلكترونيwww.shinechems.com :املوقع اإللكترونيجهة االتصال في منصة العرض: ليو هيو
OB, OB-1, BBU, :مورد معتمد ملواد التفتيح البصريةCBS-X, KCB, KSN؛ أصباغ املذيبات: مذيب أحمر 24، مذيب أصفر 14، مذيب أخضر 5، مذيب أزرق 35; أصباغ
مركبة معدنية: مذيب أصفر 21، مذيب أحمر 49، أسود27؛ أصباغ عضوية: أصفر151، برتقالي 64، أحمر 185.
B8X-Rite Europe GmbH
Althardstrasse 70 8105, Regensdorfسويسرا
هاتف: [email protected] :بريد إلكتروني
www.fast-fluid.com :املوقع اإللكترونيجهة االتصال في منصة العرض: سيمون فيسكومي،
مدير املبيعات ملنطقة الشرق األوسط وتركيا.X-Rite هي شركة رائدة عامليا في تكنولوجيا وعلوم
Pantone, األلوان. تقوم الشركة، والتي تضم اآلن شركةInc الرائدة في تصميم األلوان، ببحث حلول األلوان املبتكرة
وتصنيعها وتسويقها ودعمها من خالل أنظمة القياس وبرامج الكمبيوتر واخلدمات ومقاييس األلوان.
Al Shihab Al Thahabi Tr. تشارك في املعرض بالتعاون مع.Co. LLC
J10 Yantai Fenglin Advanced Materials Co
Ltd Level 11, CITIC Tower, Changjiang Rd, ETDZ,
Shandong, 264000، الصنيجوال: 1885 5356 156 86+
[email protected] :بريد إلكترونيwww.fenglin.com.cn :املوقع اإللكتروني
جهة االتصال في منصة العرض: بينغفي شينغتعد Fenglin مورد رائد لراتنج البوليستر ملساحيق الطالء.
ويعرفبأنه واحد من أكثر املشاركني النشطني في السوق العاملي. وبفضل وجود اثنني من منشآت التصنيع والبحث والتطوير
في Yantai، تلتزم الشركة بتوفير جودة عالية ومنتجات مبتكرة لعمالئها، وتوفير دعم قوي إليجاد حلول للمنتجات
والطالء، وتساعد الشركة على حتقيق مزايا التكلفة.
B11A Yantai Meicheng Advanced Materials
Co Ltd#1202 Huanghai Mingzhu, No 63 Guanhai Rd,
Laishan, Yantai, Shandong، الصنيهاتف: 472 6397 535 86+
[email protected] :بريد إلكترونيwww.meichengresins.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: وانغ شاوراستينج بوليستر وراتنج إيبوكسي ملسحوق الطالء.
F29 Yantai Pushine International Trade Co,
LtdRoom 632, International Commodity Exhibition
Center, Yantai Bonded Port, Zhifu District, Yantai City, Shandong Province 264000
الصنيهاتف: 1610 6381 138 86+
بريد إلكتروني: com.ا[email protected] :املوقع اإللكتروني
جهة االتصال في منصة العرض: زيا Yantai Pushine International Trading تلتزم شركة
بإنتاج وتطوير ماكينات تصنيع الكيماويات ومواد البناء وماكينات صناعة البالستيك. وبفضل النقل امليسر
والفريق التقني، تصدر املنتجات بشكل أساسي إلى الشرق األوسط وجنوب شرق آسيا، وجنوب أمريكا وأفريقيا وأوروبا
واملناطق األخرى.
E10Yillong Chemical Group Ltd
Feilo Edifice Plaza, 6F/602No 398 Yonghe Rd
Zhabei District 200072Shanghai
الصنيهاتف: 6643 6526 21 86+
[email protected] :بريد إلكترونيwww.yil-long.com :موقع إلكتروني
Stand contact: Osmanمنذ تأسيسها في عام 1997 في هوجن كوجن، أصبحت Yil-Long Chemical واحدة من الشركات الرائدة في
توريد املواد الكيماوية اخلام لصناعة الطالء وكيماويات البناء بفضل شبكتها الدائمة للتوزيع احمللي في
أكثر من 53 دولة. تفخر الشركة بتطويرها للعالمات Celocell, Esterol, Bentogel, :التجارية التالية
.Feonox, Optisil, Blanc Fixé L, Tionox and Redipol
J32Yokes Makina San Tic Ltd Sti
Itob Organize Sanayi Bolgesi 10005Sok. No: 46 Tekeli, Menderes
Izmirتركيا
هاتف: 58 04 799 232 [email protected] :بريد إلكتروني
K13Ystral GmbH Maschinenbau +
ProcesstechnikWettelbrunner Str 7
Ballrechten-Dottingen 79282 أملانيا
هاتف: 0 5603 7634(0) 49+فاكس: 99 5603 7634(0) 49+
[email protected] :بريد إلكترونيwww.ystral.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: دومينيك سيغر110% حلول اخللط
بفضل معرفة الشركة الشاملة وخبرتها الطويلة صنع للماكينات وأنظمة املعاجلة، طورت Ystral حلوال كم
مع عمالئها لتطبيقات معينة. Ystral Conti-TDS حتدث مع اخلبراء لتعرف املزيد عن
Technology- وهي التقنية رقم واحد في ترطيب املساحيق.
J6Zen FZE
صندوق بريد 122505Saif Zone
Sharjahاإلمارات العربية املتحدةهاتف: 5030 557 6 971+
G10 Zhejiang Coloray Technology
Development Co Ltd No 151, Huishan Road, Deqing Economic and
Technological Development Zone, Huzhou City,Zhejiang, الصني
هاتف: 2188 883 573 [email protected] :بريد إلكتروني
www.coloray.cc :املوقع اإللكترونيجهة االتصال في منصة العرض: هو شانغيان
صنعة ورائدة في مجال إنتاج صبغة تأثير اللؤلؤ شركة موصبغات التأثير األخرى في الصني.
D16 Zhejiang Hongyu New Materials Co
Ltd Si'an Economic Developing Zone, Changxing
County, Zhejiang Province، الصنيجوال: 6353 6572 136 86+
[email protected] :بريد إلكترونيwww.hybentonite.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: جيسي ليوإضافات ريولوجية، وبنتونيت بأساس مائي وتراب مبيض
منشط.
J4 Zhejiang Jinkun Zirconia Industry Co
Ltd1399 Jingliu Rd, Linjiang Industrial Park,
،Dajiangdong Hangzhou, Zhejiang 311225،الصني
جوال: 18067918855 [email protected] :بريد إلكتروني
جهة االتصال في منصة العرض: فان ميكيحصلت Sino-German على شهادة ISO9001:2008، وهي متخصصة في صناعة خرز الطحن املصنوع من الزركونيا،
ومسحوق الزركونيا لعدة عقود.
كتالوج املعرض
C11 معرض الشرق األوسط للطالء 2017www.coatingsgroup.com
جهة االتصال في منصة العرض: علي امري سوزر Sozer Machine Industry and Trade Limited أنشئت
Company في عام 1946. مت توجيه Sozer إلى صناعة الدهانات والكيماويات منذ عام 1970. تتوفر معدات إذابة
عالية السرعة، طواحني السالل، طواحني بيرل، معدات خلط املعاجني الكوكبية، معجنات من نوع Zet، تعبئة
املنتجات ومعدات قياس الوزن، معدات الدفع عالية القص ملعدات اإلذابة، واحلاويات لنطاق املنتجات.
E11Synthomer Middle East
Office E201, Building 2, East WingDubai Airport Free Zone
Dubai 46455اإلمارات العربية املتحدةهاتف: 507765610 971+
[email protected] :بريد إلكترونيwww.synthomer.com :موقع إلكتروني
جهة االتصال في منصة العرض: نبيل أحمدتعد Synthomer أحد املصنعني الرواد للبوليمرات
املتخصصة احملمولة على املاء، وتعرض الشركة نطاقا كبيرا من املواد الكيميائية اخلاصة بالدهانات، ومواد البناء واملواد الالصقة مبا في ذلك األكرليك والفينيل أستات كوبوليمر
ومطاط ستيرين بوتادايني، والبوليكلوربرين واملساحيق القابلة إلعادة التشتت.
ا لإلنتاج حول العالم، مبا تعمل Synthomer من 24 موقعفيها املوقعني في الدمام ودبي.
C1Tasnee
PO Box 26707 Riyadh 11496
اململكة العربية السعوديةهاتف: 122 174 114 966+
[email protected] :بريد إلكترونيwww.tasnee.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: خالد العماريإن National Industrialization Company (تصنيع) ا، وتتميز مبجموعة واسعة هي شركة متكاملة متام
من االهتمامات في مجال البتروكيماويات والكيماويات والبالستيك وتصنيع املعادن واخلدمات الصناعية
والتكنولوجيا البيئية. Tasnee وبفضل توظيف 8000 موظف في 5 قارات، حتتفظ
والشركات التابعة لها بسجل زاخر لتوفير املنتجات واخلدمات املبتكرة تلف الصناعات.
.Cristal تعرض الشركة منتجاتها بالتعاون مع
J3 Tianjin Jiateng Chemical Products Co
Ltd Five Floor of C10 West Buliding, Entrepreneurial
Headquarter, Fuyuan Road, WuqingDevelopment Zone, Tianjin، الصني.
هاتف: [email protected] :بريد إلكتروني
www.tjjtchem.com :املوقع اإللكترونيجهة االتصال في منصة العرض: شني جينغ
اقتحمت Tianjin Jiateng Chemical Products بشكل قوي مجال تصدير امليثيل ايثيل كيتون (MEK)، ميثيل بيوتيل كيتون (MIBK)، سايكلوهيكسنون (CYC)، ن،
(EAC) خالت اإليثيل ،(DMF) ن-ثنائي ميثيل الفورماميد عن املنتجات والتولوين-2،4-الدي إيزوسيانات (TDI)، فضال
الكيماوية األخرى واملواد اخلام ذات الصلة. حتتفظ الشركة CNPC, Sinopec, بعالقات جيدة في إطار التعاون مع
The Valspar Corporationو ،CNOOC, AkzoNobel NVلعدة سنوات.
H2Tinting Systems Company
PO Box: 3250, Ammara Street Old Industrial Area Khamis Mushayt, Aseer 61961
اململكة العربية السعوديةهاتف: 88000 1723 966+
فاكس: 82561 1723 [email protected] :بريد إلكتروني
www.tsccolor.com :املوقع اإللكترونيجهة االتصال في منصة العرض:
محمد شابير حسنيإن شركة Tinting Systems Company هي مزود متكامل
ركبات. تخدم حللول التلوين للطالء والدهانات وتصنيع املالشركة العمالء في الشرق األوسط، ومناطق آسيا واحمليط الهادئ منذ ما يزيد عن عقد، واحتلت الشركة مكانة مميزة
في هذا اال بفضل مجموعة متنوعة من امللونات في نقاط البيع ومعاجني األصباغ في املصنع.
C15B Tongling Jintai Chemical Industrial Co
LtdRecycling Industrial Park of Tongling Nonferrous
Metals Group, Tongling City, Anhui Province, الصني ،264000
هاتف: [email protected] :بريد إلكتروني
www.tljthg.com.cn :املوقع اإللكترونيجهة االتصال في منصة العرض: وانغ زيوكينغ
مصنع معتمد لكربونات ثنائي ميثيل، بروبيلني غليكول، كربونات إيثيل، كربونات إيثيل امليثيل، وجاليكول ثنائي
بروبيلني، جاليكول وكربونات صنف البطاريات. يبلغ إنتاجها السنوي من هذه املنتجات 120.000 طن من كربونات ثنائي
ميثيل، و100.000 طن من بروبيلني غليكول.
D18Toyobo Stc Co Ltd
Dojimahama, Kita-Ku 2-2-8 Osaka 530-0004
اليابانهاتف: 5430 4797 816+
فاكس: 5432 4797 [email protected] :بريد إلكتروني
www.toyobo.co.jp/vylon/e :املوقع اإللكترونيجهة االتصال في منصة العرض: جونيشي تانيموتوإن Toyobo Stc Co Ltd هي شركة لتجارة الكيماويات
مقرها اليابان.تعرض الشركة واحدا من منتجاتها، وهو ®Vylon. إنه عبارة
عن راتنج كوبوليستر، وهو يوفر مادة الصقة ممتازة تلف الطبقات مثل البالستيك واملعدن.
مناسب لطالء األسطح الرقيقة واملواد الالصقة والدهانات لتطبيقات متعددة.
.Toyobo Co Ltd تشارك في املعرض بالتعاون مع
K6Union Colours Ltd
Union House, Hempshaw Lane Stockport, Cheshire SK1 4LG
اململكة املتحدةهاتف: 1111 392 9172 44+
[email protected] :بريد إلكترونيwww.unioncolours.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: أوليفر بفيفركورن Longyu شركة تابعة لشركة Union Colours إن
Pigments and Chemicals، وهي أكبر منتج لألصباغ العضوية في آسيا. متتلك الشركة قدرات التطوير في
ثالثة مراكز تقنية منتشرة في جميع أنحاء العالم، وتصنع منتجاتها في الصني وجنوب أفريقيا. ترتكز قوة الشركة
على خبرتها وفهمها الحتياجات العمالء.
F7Vibro-Mac Srl
Via Primo Maggio, 2/4San Zenone al Lambro, Milan 20070
إيطالياهاتف: 4390 9826 02 39+
فاكس: 4392 9826 02 [email protected] :بريد إلكتروني
www.vibromac.it :موقع إلكترونيجهة االتصال في منصة العرض: السيد ماركو جيروزاتأسست Vibro-Mac في عام 1968 ومنذ ذلك احلني وهي تتخصص في تخطيط وتصميم وتصنيع آالت املعاجلة.
وبجانب اآلالت املنفردة نعمل في مجال بناء املصانع بنظام تسليم املفتاح لتصنيع املنتجات في الصناعات التالية:
الدهانات والورنيش، األحبار، املعاجني، وموانع التسرب، واملنتجات الكيميائية الزراعية.
G6Vinavil Egypt For Chemicals
66 Kornish Elnil StreetMaadi, Cairo
مصرهاتف: 3750 2525 62+
فاكس: 3749 2525 [email protected] :بريد إلكتروني
H1Visen Polymer FZE
1E - 03D, Hamriyah Free Zone Sharjah اإلمارات العربية املتحدة
هاتف: [email protected] :بريد إلكترونيwww.visen.net :املوقع اإللكتروني
جهة االتصال في منصة العرض: فيجاي إس نايرشركة مصنعة ملستحلبات البوليمر التي تتكون من
VAM وبوليمرات ،VAM والكوبوليمر ، VAM الهوموبوليمر، ومستحلبات اإلسترين أكريليك، ومستحلبات األكريليك النقي، ومواد الرابط اللدنة، واملغلظات األكريليك، وعوامل
التشتيت، وعوامل التعتيم اخلاصة بتطبيقات الدهانات.
F6Wacker Chemicals Middle East FZE
PO Box 341071, Dubai Silicon Oasis Dubai 41071
اإلمارات العربية املتحدةهاتف: 9999 709 4 971+
فاكس: 9911 709 4 [email protected] :بريد إلكتروني
www.wacker.com/cms/en/mea/ :املوقع اإللكترونيmea_home/home.jsp
إن Wacker مجموعة كيماوية نشطة عامليا، ويقع مقرها
كتالوج املعرض
C10 معرض الشرق األوسط للطالء 2017www.coatingsgroup.com
جهة االتصال في منصة العرض: ماهتاب فافينياتأسست Resitan Co في 1981، وتبلغ قدرتها اإلنتاجية
ا من الراتنج السنوية 75000 طن، ألكثر من 130 نوعالصناعي في إيران.
تشمل املنتجات الرئيسية: الراتنجات الفينولية وراتنجات السبك، الباكليت، وراتنجات البوليستر غير املشبعة واملشبعة، وراتنجات الفينيل استر، األلكيد وراتنجات األلكيد املعدلة، راتنجات االيبوكسي استر، وراتنجات
االكريليك (القائمة على املاء أو املذيب)، االيبوكسي والبوليستر الصلب، والراتنجات األمينية.
L3Rhopoint Instruments Ltd
Rhopoint Instruments LtdRhopoint House, Enviro 21 Park
Queensway Avenue SouthSt Leonards on Sea
East Sussex TN38 9AGاململكة املتحدة
هاتف: 739622 1424(0) [email protected] :بريد إلكتروني
www.rhopointinstruments.com :املوقع اإللكترونيجهة االتصال في منصة العرض: دون مينديز
تصنع Rhopoint Instruments معدات اختبار عالية اجلودة للدهانات والطالءات.
تشتمل املنتجات أجهزة قياس: اللمعان، الضباب، الظل، التعتيم، واللزوجة وMFFT (احلد األدنى من درجة حرارة
تشكيل الطبقات الرقيقة).تصنع الشركة جميع املنتجات في اململكة املتحدة،
وتتوافق مع جميع معايير ISO ومعايير ASTM ذات الصلة.
K10RISHICHEM Mideast Ltd
2903, Jumeirah Business Centre -2, Cluster V, Jumeirah lake Towers, Dubai
اإلمارات العربية املتحدةهاتف: 4356867 04 971+
فاكس: 4356866 04 [email protected] :بريد إلكتروني
www.rishichem.ae :موقع إلكترونيجهة االتصال في منصة العرض: سوميش كومار
تعمل RishiChem Mideast Ltd في مجال توزيع املواد الكيماوية وتتاجر فيها منذ أكثر من 10 سنوات ولها
مكتب رئيسي في دبي ومستودع في منطقة جبل علي للدهانات واألحبار والبالستيك احلرة. تقدم الشركة حلوال
ومنتجات العناية الشخصية، واإلنشاءات واملطاط والعديد من قطاعات الصناعات األخرى املتنامية.
M2Sancora Paints Industries Sdn Bhd
Pamunting Perak34600 ماليزيا
هاتف: 7717 877 16 60+
H6Santint
Room 2901, BM InterContinental Business Center,No 500 Hengfeng Road, Shanghai، الصني
هاتف: 8710 6353 021 [email protected] :بريد إلكتروني
www.santint.com :املوقع اإللكترونيجهة االتصال في منصة العرض: طوني زاو
إن Santint هي واحدة من أهم ثالث شركات في مجال تصنيع ماكينات التلوين لنطاق الطالء الصناعي. وبفضل
ا من اخلبرة في هذه الصناعة، تعمل الشركة مع 20 عامالعمالء العامليني واملشغلني املشاركني لبناء مستقبل
لصناعة التلوين بالتقنية املبتكرة.
M3BSaudi Carbonate
صندوق بريد 25679Riyadh 11476
اململكة العربية السعوديةهاتف: 2445 265 1 966+
A9Shanghai Kingstone Chemical
J17 Shanghai Sower Mechanical &
Electrical Equipment Co Ltd Room 2901, BM InterContinental
Business Center, No 500 Hengfeng Road, Shanghai
الصنيهاتف: 63538710 021 86+
[email protected] :بريد إلكترونيwww.sowerchina.com :املوقع اإللكترونيفانغ جهة االتصال في منصة العرض: يانغ
شركة مصنعة معتمدة ملعدات السوائل.
H9Shanghai Yipin Pigments Co Ltd
Jiasongbei Road 4839Jiading District
Shanghai 201814الصني
هاتف: 4700 5950 21 86+فاكس: 4647 5950 21 86+
[email protected] :بريد إلكتروني
A5 Shanghai Yuejiang Titanium Chemical
Manufacturer Co Ltd7th Floor, No 355 Changyang Rd
Shanghai 200082الصني
هاتف: 2050 6513 21 86+فاكس: 3017 5509 21 86+
[email protected] :بريد إلكترونيwww.yuejiangchem.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: السيدة/ شاين زوتنتج Shanghai Yuejiang Titanium Chemical بشكل أساسي الصبغات البيضاء مثل ثاني أكسيد التيتانيوم
"Rutile & anatase"، والليثوبون، كبريتات الباريوم، والكاولني بإنتاجية تبلغ 300.000 طن/السنة. وبفضل
ا من اخلبرة فهي تصدر %70 من متتع الشركة بـ 30 عاممنتجاتها إلى اخلارج. وتضم قائمة عمالئها من أفضل 500
.Ennis Paintو BASF شركة في العالم كال من شركة
K26 Shanxi Fulihua Chemical Materials Co
Ltd RM 811,Steel Building, No 188, Xinghua Street,
Taiyuan Shanxi 030027، الصنيهاتف: 6587855 351 86+
[email protected] :بريد إلكترونيwww.sxflh.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: جورج ليو Shanxi Fulihua Chemical Materials Co Ltd تأسست
صنع متخصص في إنتاج أسود في عام 2002، وهي مالكربون. يستخدم أسود الكربون بشكل كبير في الطالء
واألحبار واجللود والبالستيك والفايبر والصناعات األخرى بفضل خصائصه املمتازة مثل السواد العالي وقوة التلوين
والقدرة اجليدة على التشتت.
A4 Shifang Taifeng New Flame Retardant
Co LtdNo 66 Jiancai Rd, Chengdu 610051
الصنيهاتف: 86-28-84721008+
فاكس: [email protected] :بريد إلكترونيwww.taifeng-fr.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: ويسلي ووصنع متخصص ملثبطات اللهب من فوسفات األومنيوم م
ا في إنتاج مثبطات للطالء. والشركة متخصصة أيضاللهب اخلالية من الهالوجني على أساس فوسفات
األومنيوم منذ عام 2001.
G18 Sichuan Lomon Titanum Industry
Co Ltd23 Gaopeng Rd, Hi-Tech Zone Chengdu
Sichuan 610041الصني
هاتف: 2572 8518 028 [email protected] :بريد إلكترونيwww.lomon.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: زون زوثاني أكسيد التيتانيوم.
K28Sinoti/Tonghui
B-10/F, Huandao Office Building, No.1 4th HaikouHainan، الصني 570208
هاتف: 8041 6628 898 [email protected] :بريد إلكتروني
www.hnsinoti.com :املوقع اإللكترونيجهة االتصال في منصة العرض: زانغ نينغ
توفر Sinoti مواد خام لراتنجات UPR، والطالءات والدهانات DEPT, DMA, DEA, TiO2, MA واألحبار، إلخ... مثل
للحصول على املزيد من املعلومات اتصل على: [email protected]؛[email protected]
H15Sozer Makina San Tic Ltd STI
Kocaeli Imes Organize Sanayi Bolgesi Imes 5Caddesi No 7 Cerkesli - Dilovas
Kocaeli 41155تركيا
هاتف: 9255 722 262 90+فاكس: 9265 722 262 90+
[email protected] :بريد إلكترونيwww.sozer.com :املوقع اإللكتروني
كتالوج املعرض
C9 معرض الشرق األوسط للطالء 2017www.coatingsgroup.com
F16Omnova Solutions SAS
14 avenue des tropiques ZA de courtaboeuf 2 Courtaboeuf, Essonne 91955
فرنساهاتف: 00 27 29 69 1 22+
[email protected] :بريد إلكترونيwww.omnova.com :موقع إلكتروني
جهة االتصال في منصة العرض: نك هولتبيتعرض OMNOVA Solutions حافظة واسعة من راتنج
،PLIOLITE®, Hydro PLIOLITE®) الطالء وبوليمرات األرضيات ®PLIOWAY®, PLIOTEC® and MOR-GLO)، والتي تضيف
سمات األداء القيم للتطبيقات التي تشمل تشطيبات احلجارة اخلارجية للمبنى وطالءات direct-to-metal ومنع
البقع ومقاوم املياه، فضال عن العناية بأرضيات املؤسسات.www.omnova.com :فضال زر موقعنا
M3AOmya International AG
Baslerstrasse 42 Oftringen 4665
سويسراهاتف: 93 63 392 79 41+
[email protected] :بريد إلكترونيwww.omya.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: جاك ستاينإن Omya هي املنتج الرئيسي للمعادن الصناعية،
أي املواد املالئة في املقام األول واألصباغ املشتقة من كربونات الكالسيوم والدولوميت، وهي موزع عاملي للمواد
الكيميائية املتخصصة. تأسست OMYA في عام 1884 في ا في سويسرا، ولها حضور عاملي ميتد ألكثر من 175 مصنع
أكثر من 50 دولة مع توظيف 8000 موظف.
F25 Panzhihua Dongfang Titanium
Industry Co LtdYizhishan Vanadium & Titanium Industrial Park
Miyi, Panzhihua CitySichuan 617201
الصنيهاتف: 1186 2810 81 86+
E7Potters Europe
Pontefract Road, Barnsley, S71 1EJاململكة املتحدة
هاتف: 704516 1226 44+فاكس: 615 207 1226 44+
[email protected] :بريد إلكترونيhttp://www.potterseurope.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: جان-فيليب كيرديا حول العالم، أصبحت Potters أكبر بفضل 23 مصنع
منتج للكريات اهرية الزجاجية اجلوفاء والصلبة املستخدمة كمواد مالئة وظيفية. املنتجات متوفرة
بالعديد من جسيمات األحجام والكثافات القوة، وهذه اإلضافات هي من أجل حتسني امليكانيكية، واخلصائص
االنسيابية في الصيغ الكيميائية اخلاصة باللدائن احلرارية والتصلد باحلرارة. تتيح لك الكريات اجلوفاء خفيفة الوزن زيادة احلجم املتزامنة وانخفاض الكثافة. الشركة تعرض بالتعاون مع H.A.K Industrial Chemicals (LLC) - إحدى
.Kanoo Group شركات
E20 Presafer (Qingyuan) Phosphor
Chemical Co LtdXiongxing Industrial Park, Qingyuan Hi-tech
Industrial Development Zone, Guangdong 511540, الصني
هاتف: 3129090 763 [email protected] :بريد إلكترونيwww.presafer.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: شاو ميلينغصنع متخصص ملثبطات اللهب اخلالية من الهالوجني م
للدهانات والغزل والنسيج والتأصيص، والبالستيك.
K27 Puyang Hongye Hi-Tech Development
Co Ltdهاتف: 7136 878 393 86+
[email protected] :بريد إلكترونيwww.hyhitech.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: السيد/ جاكإن Puyang Hongye Hi-Tech Development Co Ltd هي
صدرة إلستر الكحول C-12 وإستر صنعة وم شركة مالكحول C-16 املصنع بالتقنية األمريكية، ويبلغ إنتاجها
،C-12 السنوي 30.000 طن/السنة من إستر الكحولو8000 طن في السنة من إستر الكحول C-16. جهة
[email protected] :االتصال
A13 Puyang Zhongke Xinyuan Petroleum
Chemical Co LtdPuwang Industry Cluster Area,
Puyang City, Henan Province 457000الصني
هاتف: 0876 891 393 86+فاكس: 8599 611 393 86+
[email protected] :بريد إلكترونيwww.zkxychem.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: ليزا زانغ Puyang Zhongke Xinyuan Petroleum Chemical جتمع
Co Ltd البحث العلمي واإلنتاج واملبيعات في مؤسسة خاصة واحدة علمية وتكنولوجية. تنتج في األساس راتنج الهيدروكربون C5 ,C9, C5/C9 لوضع عالمات بالدهان على
الطرق واملواد الالصقة واملطاط وحبر الطباعة وصناعة الدهان.
K24Qingdao Echemi Technology Co Ltd
5F Inter Royal Mansion, No 15 Donghai West Road,Qingdao, Shandong، الصني
جوال: 9417 5328 131 [email protected] :بريد إلكترونيwww.echemi.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: مونيكا وونغإن Echemi هي منصة متخصصة للتجارة الكيماوية جلعل
املعامالت الكيميائية أكثر سهولة. ميكنكم البحث عن معلومات آلالف املنتجات مثل األخبار وورقة بيانات سالمة
املواد، وتوقعات اجتاه السعر. أكثر من 100.000 عنصر للبحث في انتظاركم. أكثر من 3000 مصنع في انتظاركم
للتعاقد.
E20A Qingdao Lanquens International Co
Ltd No 10, Hong Kong Middle Road, Shinan District,
Qingdao, Shandong، الصنيهاتف: 5952 8560 532 86+
[email protected] :بريد إلكترونيwww.lanquens.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: جيسون ليتعد Lanquens واحدة من موردي املواد الكيماوية اخلام
الرائدة في الصني، هذا بفضل خبرة متتد ألكثر من 10 أعوام في مجال األصباغ العضوية والعوامل الكيماوية املساعدة
وخدمة قطاع األحبار والطالء وصناعة البالستيك.
G1Rainbow General Trading LLC
ص ب 2409، املنطقة الصناعية اجلديدة، عجمان عجمان 2409
اإلمارات العربية املتحدةهاتف: 37739 674 971+
فاكس: 37740 674 [email protected] :البريد اإللكتروني
www.rainbowchemical.com :املوقع اإللكترونيجهة االتصال في منصة العرض: رنيم عرابي
تعتبر شركة Rainbow Chemicals موزع للمواد الكيميائية في الكثير من الصناعات، ولديها تاريخ من
ا في الشرق األوسط وأفريقيا اخلبرة يصل إلى 30 عاموجنوب آسيا. وتتعاون مع الشركات املصنعة مثل
Chemours و Schulke و Organikkimya® و Orgachem و HEAD و Hansol و San Nopco و Schwegmann و Eternal
و Double Bond Chemical و Black Diamond و CCP و Ruicheng وغيرها من الشركات.
E12RAR Resin & Chemical Industries
1-Lake Plaza Jumeirah Lake TowersDubai 47381
اإلمارات العربية املتحدةهاتف: 4286 450 4 971+
فاكس: 4274 450 4 [email protected] :بريد إلكتروني
www.rarresin.com :موقع إلكترونيجهة االتصال في منصة العرض: والدو باليتان
راتنجات ومذيبات للصناعات الكيميائية.
E8A, D9AReda Chemicals
Al Manal Tower 901Sheikh Zayed Road
PO Box 15004, Dubaiاإلمارات العربية املتحدةهاتف: 5100 332 4 971+
F12Resitan Co
3rd Floor, No 5 Esfandiar AveVali-E-Asr Ave
Tehran 19679-17191إيران
هاتف: 0521-5 2202 (21) 98+فاكس: 0486 2202 (21) 98+
[email protected] :بريد إلكتروني
كتالوج املعرض
C8 معرض الشرق األوسط للطالء 2017www.coatingsgroup.com
[email protected] :بريد إلكتروني
A11Luan Jietonda Chemical Co Ltd
15 Li Dun, Northern Luan City, Anhui Province, الصني
هاتف: 1165 371 564 [email protected] :بريد إلكتروني
www.jietondachem.com :املوقع اإللكترونيجهة االتصال في منصة العرض: كيفني زو
صنعة إلضافات مسحوق الطالء طورة ورائدة وم شركة مفي الصني، وتشمل منتجاتها عامل إطفاء اللمعة،
عدل شمعي صلب إلطفاء اللمعة وعامل جتفيف، وم ومعزز وغيرها من اإلضافات سرع وعامل للملمس وعامل م وم
الوظيفية اخلاصة.
B1Manaseer Carbonate
C/o Modern Cement & Mining CompanyKing Abdullah 11 St 302, PO Box 141414
Jordanهاتف: 7377779 79 962+
[email protected] :بريد إلكتروني
F11Maple Powder Machines Co., Ltd.
No 20 Hefei Road, YTETDZ, Yantai City, Shandong, الصني
هاتف: 678 6953 535 [email protected] :بريد إلكتروني
www.powdermachines.com :املوقع اإللكترونيجهة االتصال في منصة العرض: زينغ تاو
مورد معتمد ملاكينات مساحيق الطالء، ولديه فريق تقني عالي املستوى ومتمكن من التكنولوجيات املتطورة
ونظرية التصميم خلط معاجلة مسحوق الطالء، واخلالط، والقاذف، والساحق على البارد، وماكينة الطحن.
F13Mirodur SpA
Via Delle Scienze 3 Rome 04011
إيطالياهاتف: 81746 0692 39+
فاكس: 80644 0692 [email protected] :بريد إلكتروني
www.turbomill.com :املوقع اإللكترونيجهة االتصال في منصة العرض: ماسيمو فيتيلي
ستعرض Mirodur ما يلي:إن Turbomill هي طاحونة دوارة مميزة، وهي األسرع في مرات الطحن واألسهل في التنظيف. ميكن تغيير األلوان بالكامل
في غضون 10 دقائق باستخدام كمية قليلة للغاية من ذيب. يباع املنتج في 70 دولة حول العالم. امل
طالءات صناعية ومانعة للتآكل.
L9MPCProkim
Rue Mhamedia - Zone Industrielle El Mghira Bp 175Fouchana, Ben Arou 2082
تونسهاتف: 8222 7940 216+
فاكس: 8144 7940 [email protected] :بريد إلكتروني
www.mpcprokim.com :املوقع اإللكترونيجهة االتصال في منصة العرض: محمد خليل بوروجا
إن MPCProkim شركة صناعية في تونس تعمل في مجال الصناعات الكيماوية للبلوليمر، وتتخصص في إنتاج
وتسويق راتنج األلكايد واملستحلبات والبوليستر املائي، وهي تهدف في املقام األول إلى صناعة الدهان والغراء واملواد
املركبة.
H3Nanyang Lingbao Pearl Pigment Co
Ltd
N3National Solvents FZCO
,PO Box 261443, Jafza near Cargo Terminal 3 Dubai
اإلمارات العربية املتحدةهاتف: 8839433 4 971+
فاكس: 8839434 4 [email protected] :بريد إلكتروني
www.national-solvents.com :املوقع اإللكترونيجهة االتصال في منصة العرض: غوبال كانوجيا
إن National Solvents FZCO في دبي تأسست في العام 2008. تصنع الشركة التكس مستحلب البوليمر،
مثل منتجات األستيرين اكريليك، والفينيل االكريليك، االكريليك النقي، كوبوليمر فيوفا، بي في إيه هومو بوليمر،
والتي تستخدم على نطاق واسع في مواد الطالء واملواد National الالصقة والبناء والصناعات الكيميائية. تلتزمSolvents بتوريد أفضل اخلدمات واملنتجات بأعلى جودة.
.General Mineral Industries الشركة تعرض بالتعاون مع
K7Netzsch Feinmahltechnik GmbH
Sedansstrasse 70D-95100 Selb
أملانياهاتف: 121 797 9287 49+فاكس: 797149 9287 49+
[email protected] :بريد إلكتروني
H10Wilhelm Niemann GmbH & Co
Nordlandstraße 16Melle 49326
أملانياهاتف: 49-5428-950.0+
فاكس: [email protected] :بريد إلكتروني
www.niemann.de :املوقع اإللكترونيجهة االتصال في منصة العرض:
نطاق اإلنتاج:KREIS-DISSOLVER®
معدات اإلذابة اخلاصة باتبر واإلنتاج بقدرة 315-2.2 كيلو واط لدفعات اإلنتاج حتى 15.000 لتر.
KREIS-BASKET-MILL®
معدات اإلذابة للمختبر واإلنتاج بقدرة 132-2.2 كيلو واط لدفعات اإلنتاج حتى 3000 لتر.
KREIS-DISSOLVER®-BUTTERFLYإنتاج معدات اإلذابة بتصميم الفراشة للمنتجات عالية
اللزوجة وبقدرة 90-15 كيلو واط لدفعات اإلنتاج حتى 1500 لتر.
G4Nigtas Ltd STI
Kayseri Yolu Uzeri AtaSanayi Karsisi Hidirlik Mevkii
Nigdeتركيا
هاتف: 1500 214 388 [email protected] :بريد إلكتروني
E6Nitro Chemical Industry Ltd
24 Rama I Road, Rongmuang, Pathumwan 10330تايالند
هاتف: 5275 214 662+فاكس: 9282 215 662+
[email protected] :البريد اإللكترونيwww.nitrochemical.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: باكورن ويراسومبوتتوفر شركة Nitrochemical Industry Ltd في تايالند
للعمالء أفضل نوعية من النيتروسليلوز الستخدامه في تصنيع الكيه اخلشب والورق، والطالء، وأحبار الطباعة،
وورنيش الطائرات، والورنيش الوقائي، وطالء رقائق األلومنيوم Nitro Chemical وغيرها من االستخدامات. وتقوم شركة
"RS" و "SS" بتوريد نوعني من النيتروسليلوز Industryمبختلف درجات اللزوجة بناء على االستخدام. وتشارك في
.ABC Chemical Exports املعرض مع شركة
E6NOBEL NC CO LTD
24 Rama 1 Road, RongmuangPathumwan 10330
تايالندهاتف: 26138923 66+
فاكس: 22163992 [email protected] :بريد إلكتروني
www.nitrocellulose.com :موقع إلكترونيجهة االتصال في منصة العرض: باكورن ويراسومبوت.
إن Nobel NC هي واحدة من أكبر الشركات املصنعة للنيتروسليلوز الصناعي في تايالند. الشكل احلبيبي الفريد
للنيتروسيليلوز الذي تصنعه Nobel يعطي خصائص انسيابية رائعة الستخدامه في األحبار والدهانات، يتميز
املنتج بسهولة املناولة وخلوه من الغبار، ويظهر احلد األدنى من انتقال املذيب أثناء النقل والتخزين. الشركة تعرض
ABC Chemical Exports بالتعاون مع
B15Oliver Y Batlle SA
Ctra. Mataró 39-47Badalona 08911
إسبانياهاتف: 1010 464 93 34+
فاكس: 3040 464 93 [email protected] :بريد إلكتروني
www.oliverbatlle.com :موقع إلكترونيجهة االتصال في منصة العرض: كزافييه فيالنويفا
تعد Oliver+Batlle شركة رائدة في مجال إنتاج معدات لتصنيع وتعبئة الدهانات واألحبار والورنيش واملواد الالصقة،
وموانع التسرب، التي تعتمد في إساسها إما على املاء أو املذيبات، على أي مستوى. O + B تقدم احللول الهندسية
واحللول املتكاملة اصصة للدهانات والصناعات املرتبطة بها.
كتالوج املعرض
C7 معرض الشرق األوسط للطالء 2017www.coatingsgroup.com
الهندهاتف: 7210 2658 79 91+
فاكس: 1889 2658 79 [email protected] :بريد إلكتروني
www.icidyes.com :املوقع اإللكترونيجهة االتصال في منصة العرض: تيمير شاه
إن ICI التي تأسست عام 1962 هي شركة مصنعة ورائدة في مجال إنتاج مستحضرات األصباغ واملساحيق.
OCTAFINE مشتت أصباغ للدهان لون عام ملاكينات التلوين OCTATINT م
لون بأساس من البوليول لرغوة البولي يوريثان OCTAPOL مOCTATONE مستحضر صبغة احلبر لطباعة الفليكسو
واحلفر الفوتوغرافي.ICHOLACE أصباغ عضوية وغير عضوية للطالء-الدهان،
وحبر الطباعة والبالستيك واملطاط وأحبارHYDROFLEX بأساس مائي للفليكسو.
H12Inter-China Chemical Co Ltd
1st Floor, No C19 Building, ZUSP, Dingmao New District, Jingshiwu Road, 212009, Zhenjiang,
Jiangsu, PR الصنيهاتف: 3592 8998 511 86+
[email protected] :البريد اإللكترونيwww.chinatio2.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: زو فينغكنيالشركة رقم 1 في الصني في مجال تصنيع ثاني
أكسيد التيتانيوم TiO2. سلسلة منتجات شاملة (rutile+anatase) عملية حصرية الختبار التطبيق.
E7 Intermediate Chemicals Co Ltd
(Arabian Zinc Oxide Factory)PO Box 35790, Jubail Industrial City Eastern
Province, Jubail 31961اململكة العربية السعودية
هاتف: 3417094 13 966+فاكس: 3417910 13 966+
[email protected] :بريد إلكترونيhttp://www.arabianzinc.com :املوقع اإللكترونيجهة االتصال في منصة العرض: كوشيك شاه
شركة مصنعة تلف أصناف أكسيد الزنك وغبار الزنك H.A.K لصناعة الطالء. الشركة تعرض بالتعاون مع
Kanoo إحدى شركات - Industrial Chemicals (LLC).Group
D9 Jana - Jubail Chemical Industries
CompanyPO Box 10661, Jubail Industrial City
Jubail, Eastern Province 31961 اململكة العربية السعودية
هاتف: 8888 347 13 966+ فاكس: 8666 347 13 966+
[email protected] :بريد إلكترونيwww.jana-ksa.net :املوقع اإللكتروني
جهة االتصال في منصة العرض: برايان فيرير كابانساغتقع JANA - شركة اجلبيل للصناعات الكيماوية، في مدينة اجلبيل الصناعية، باململكة العربية السعودية،
وهي إحدى الشركات التابعة للنماء للكيماويات، وتنتج مجموعة واسعة من راتنجات االيبوكسي، والسوائل،
واحملاليل واألشكال اجلامدة موعة متنوعة من التطبيقات.
تسوق JANA راتنجات االيبوكسي حتت اثنني من األسماء التجارية - AralditeÆ و RazeenÆ. ميتد عمر العالمة
ا، وهي معروفة جيدا التجارية AralditeÆ ألكثر من 50 عامفي جميع أنحاء العالم. يتم استخدامها مبوجب رخصة
ا بتطوير العالمة من شركة Huntsman. قامت Jana أيضالتجارية اخلاصة بها، RazeenÆ والتي بها تبيع راتنجات
األيبوكسي. وقدمت العالمة التجارية RazeenÆوانطلقت في عام 2004، والقت القبول من قبل معظم عمالء
،RazeenÆ الشركة. وحاليا، وحتت اسم العالمة التجاريةأصبحت جميع املنتجات املصنعة من منتجات مطابقة
ومشابهة لـ AralditeÆوهي العالمات التجارية املرخصة التي تبيعها Jana. تنتج Jana وتسوق راتنجات األيبوكسي
ا للمعايير الصارمة التي يعتمد عليها ذات اجلودة وطبقالعديد من العمالء اليوم. وأصبحت الشركة رائدة في صناعات الطالء والراتنج، وصناعات اإلنشاءات املركبة
واملدنية على الصعيد العاملي.
J13Jiangsu Guolian Technology Co Ltd
32 Xianan Road Xiagang Street, Jiangyin, Jiangsu, 214442، الصني ا
هاتف: 0580 8616 510 [email protected] :بريد إلكترونيwww.guolianchem.com :املوقع اإللكترونيجهة االتصال في منصة العرض: زو شينغ
موزع مؤهل ملواد الدهانات.
L1 & L2Jiftex Polymers
PO BOX 31388 Jeddah 21497اململكة العربية السعودية
هاتف: 966126373073+ & جوال 00966541010078فاكس: 966126371747+
[email protected] :بريد إلكترونيwww.asiig.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: املهندس/ أمين كراجيتأسست Jiftex Polymers في عام 2003، وهي واحدة
من الشركات الرائدة في تصنيع مستحلب البوليمر من أساس مائي في اململكة العربية السعودية وبقدرة إنتاج
تبلغ 60.000 طن/العام. تخدم الشركة صناعات الدهان وكيماويات البناء والغزل والسجاد واملواد الالصقة.
املنتجات: هومو بوليمر، كوبوليمر، تير بوليمر، مستحلبات ستايرين االكريليك، اكريلك نقي ومطاط السجاد.
F33Jinan Yuxing Chemical Co Ltd
No 100 Yuxing Rd, Jinan Chemical Industry Park, Tianqiao District, Jinan
Shandong، الصني 250119هاتف: 2778 6761 531 86+
[email protected] :بريد إلكترونيwww.lxyx.chemchina.com :املوقع اإللكترونيجهة االتصال في منصة العرض: شني ليبينغ
صنع ملنتجات ثاني إن Jinan Yuxing هي أول وأكبر مأكسيد التيتانيوم في الصني، وتبلغ سعتها اإلنتاجية
.anatase و rutile احلالية 12000 طن/السنة من نوع ،R818, R838, R868, R878, A1 األنواع الرئيسية هيويتم استخدامها على نطاق كبير في صناعات مثل
الطالء والبالستيك والورق وحبر الطباعة واملطاط والفايبر ومستحضرات التجميل، إلخ.
M3CJordan Carbonate Company
PO Box 1059, 15 Abdulwehab Al Majali Street, Shmesani
Amman 11118األردن
هاتف: 5517 566 2 96+فاكس: 4668 566 2 96+
[email protected] :بريد إلكترونيwww.jordancarbonate.com :موقع إلكتروني
جهة االتصال في منصة العرض: السيد فراس الغصنيتأسست Jordan Carbonate Company في عام 1979،
صدر لدرجات مختلفة من كربونات وهي املنتج األكبر واملالكالسيوم الطبيعية واملعاجلة وبسعة إنتاج تبلغ 400.000
طن/السنة. وتصدر 80% من املبيعات إلى 30 دولة، وهي ،Green Egypt Coو Saudi Carbonate Co شريك للشركات
كما لها مشروع مشترك مع Omya International منذ عام 2004.
F27Kempro Kimyasal Maddeler Ve Dis
Ticaret ASBirlik Organize Sanayi Bolgesi 1.
Cadde No: 22 Aydinli Mevkii 34953 TuzlaIstanbul
تركياهاتف: 3449 416 216 90+
فاكس: 8349 361 216 [email protected] :بريد إلكتروني
F9KH Chemicals BV
Scheepmakery 2603331MB Zwijndrecht
هولنداهاتف: 6255268 78 31+
فاكس: 255266 786 [email protected] :بريد إلكتروني
D3Kraton
Transistorstraat 16Almere 1322CE
هولنداهاتف: 2974 546 36 31+
[email protected] :عنوان البريد اإللكتروني Arizona Chemical املعروفة في السابق باسم Kraton إنهي شركة منتجة ورائدة ومعمل تكرير حيوي لكيماويات
الصنوبر، وتزود سوق املنتجات الكيماوية الوسيطة باملنتجات املصنوعة من موارد متجددة. تورد Kraton العديد
من املواد اخلام لتمكني الشركات املصنعة العديدة مثل شركات تصنيع الدهانات وزيوت التزلق وسوائل العمل
املعدنية وإضافات الوقود والتعدين وحقول النفط.
A2Laikera International
Al Kazim Building,Block B, Office: 113, Abuhail PO Box
90085Dubai
اإلمارات العربية املتحدة هاتف: 5577 269 (4) 971+
كتالوج املعرض
C6 معرض الشرق األوسط للطالء 2017www.coatingsgroup.com
.CE منتجاتها على شهادة
J1Guangxi Wuzhou Golden Spot Resin
Ltd
E7 H.A.K Industrial Chemicals (LLC) - a
division of The Kanoo GroupPO Box 290, First Floor, Kanoo Building Sh. Khalifa
bin Zayed Road Karama, Dubai
اإلمارات العربية املتحدةهاتف: 9700 4336 971+
فاكس: 0924 4336 [email protected] :بريد إلكتروني
http://www.hakdubai.com :املوقع اإللكترونيجهة االتصال في منصة العرض: شاراد دهول
تعتبر H.A.K Industrial Chemicals املورد الرئيسي للمواد اخلام املتخصصة في مجال الدهانات والطالء، أحبار
الطباعة، واملواد الكيميائية اخلاصة بالبناء، ومنتجات العناية الشخصية واملنظفات الكيماوية والصناعات
املرتبطة بها في دول مجلس التعاون اخلليجي. ميكن االطالع على كامل نطاق املنتجات والشركات التي نتعامل معها
www.hakdubai.com :على املوقع اإللكتروني للشركة
H12 Hangzhou Forward Fine Chemical Co
Ltd No 1618 Shiji Av. Linjiang Industrial Park, Hangzhou,
Zhejiang، الصنيهاتف: 8135 8298 571 86+
[email protected] :بريد إلكترونيwww.forward-ep.com :املوقع اإللكترونيجهة االتصال في منصة العرض: يويو هير
مورد معتمد للصبغة اللؤلؤية.
C7Haris Al AfaqHangzhou Synox
PO Box 8141Saladdin Road Deira
Dubaiاإلمارات العربية املتحدة
هاتف: 4565135 50 971+فاكس: 9285 271 4 971+
[email protected] :بريد إلكتروني
K1Hangzhou Synox Pigments Co Ltd
Room 1304, Tianheng Building, No 1509 Binsheng Road, Binjiang District
Hangzhou, Zhejiang 310051 الصني
هاتف: 9510 8658 571 86+فاكس: 6373 8715 571 86+
[email protected] :بريد إلكترونيwww.synoxpigments.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: كانديإن Synox شركة رائدة في مجال إنتاج أصباغ أكسيد
احلديد، مع التزامها بتصنيع وتوريد أصباغ أكسيد احلديد ذات األداء العالي لتجميل كل شيء تقريبا. إنها متخصصة
في توريد منتجات ذات جودة عالية وبأسعار تنافسية وتعبئة مرنة وبأفضل اخلدمات. األلوان املتوفرة: أحمر، أصفر،
أسود، بني، برتقالي، إلخ.
G3 Henan Botai Chemical Building
Materials Co LtdRoom 1007, Unit 1, No 18, East of Dongfeng Road,
Jinshui District, Zhengzhou 450000, Henan Province, الصني
هاتف: 8201 5598 371 86+فاكس: 8202 5598 371 86+
[email protected] :بريد إلكترونيwww.botaichem.net :املوقع اإللكتروني
جهة االتصال في منصة العرض: لويس ليوصنع مباشر يركز على التكنولوجيا واالبتكار، إن Botai م
وتتمتع الشركة بأكثر من 10 سنوات من اخلبرة، وهي تتبوأ مكانة رائدة في مجال صناعة إضافات البناء. املنتجات
تشمل: إيثرات سيللوز (HPMC,HEMC ,MC ,HEC)؛ ،PP شتت، وفورمات الكالسيوم وألياف ومسحوق بوليمر م
وامللدنات.
J2Henan GP Chemical Co Ltd
B5Horizon Chemicals
Office 712D, Ibn Battuta Gate Offices Jebel Ali First, Dubai 488195
اإلمارات العربية املتحدةهاتف: 50989 5075 971+فاكس: 5217 4513 971+
[email protected] :بريد إلكترونيwww.horizonchemicals.com :املوقع اإللكترونيجهة االتصال في منصة العرض: محب اسحاق
تعد Horizon Chemicals مبثابة مركز توزيع للشركتني Al Sanea Chemicalو Eastern Seas Holding Co KSC
Products، وهي مجموعة صناعية رائدة تأسست في عام 1977، وتتخصص في صناعة الكيماويات الصناعية، مبا في
ذلك املذيب الكحولي األبيض، والكيماويات املستخدمة مجال النفط والكيماويات البحرية والثقيلة.
P2Horizon For Plastic Products Co
PO Box 265, Amman 11512األردن
هاتف: 9777 7 9504 [email protected] :بريد إلكتروني
www.horizonplastic.com :موقع إلكترونيجهة االتصال في منصة العرض: معتصم عبد القادر Horizon for Plastic Products Co, Amman تأسست
Jordan في عام 2000. وهي شركة صناعية رائدة، وتعرض ختلفة من املنتجات البالستيكية، للحلول مجموعة م
الغذائية وغير الغذائية في صناعات التعبئة على مستوى العالم.
توفر Horizon حاويات وعبوات تلف الصناعات مثل الدهانات والطالء الزخرفي.
F10Hormoz Powder FZE Co
Unit 60, Phase 2, Hamriyah Free Zone Sharjah 51291
اإلمارات العربية املتحدةهاتف: 380 138 501 971+
[email protected] :بريد إلكترونيwww.hormozpowder.ae :املوقع اإللكتروني
جهة االتصال في منصة العرض: فرحاد جامريزصنعة للمساحيق إن Hormoz Powder هي شركة م
املعدنية والناعمة. تشتمل بعض منتجاتنا الرئيسية على ما يلي:
كربونات الكالسيوم، أكاسيد احلديد األحمر واألصفر والباريت والبنتونيت، الهيماتيت، والدولوميت، التلك،
واحلجر اجليري. اتصل بنا ملزيد من املعلومات.
N1Hosokawa Alpine Aktiengesellschaft
Peter-Doerfler-Strasse 13-25Augsburg, Bavarian 86199
أملانياهاتف: 0 5906 821 49+
فاكس: 261 5906 821 [email protected] :البريد اإللكتروني
www.hosokawa-alpine.com :املوقع اإللكترونيجهة االتصال في منصة العرض: روالند بيرتيللي
اقتحمت Hosokawa Alpine سوق األعمال منذ أكثر من 100 عام. ويرتكز نشاطها على الطبقات الرقيقة ومعاجلة
اجلسيمات، وهي سباقة في هذا اال عامليا.
F6AImerys Minerals Ltd
Par Moor CentrePar Moor Road
Par, Cornwall PL24 2SQاململكة املتحدة
هاتف: 818000 1726(0) 44+فاكس: 811200 1726(0) 44+
[email protected] :بريد إلكترونيStand contact: Ms Louise Haines
F7IMMEA srl
Via Borsellino 27Rovato, Brescia 25038
إيطالياهاتف: 1454 0772 03 39+فاكس: 3895 072 03 39+
[email protected] :بريد إلكترونيwww.immea.eu :موقع إلكتروني
جهة االتصال في منصة العرض: السيد كالوديو فاكاريتسا
تعمل شركة Immea SRL في مجال إنتاج أنواع مختلفة من آالت توزيع اجلرعات (األوتوماتيكية وشبه األوتوماتيكية،
من حيث احلجم أو من حيث الوزن)، وهي قادرة على تقدمي أفضل احللول لتلبية جميع االحتياجات املتعلقة بتعبئة
وتوزيع جرعات املنتجات السائلة، وجميع أنواع مواد التعبئة ذات الصلة بالعبوات الصلبة من حيث الشكل واحلجم.
.Vibro-Mac Srl تشارك في املعرض بالتعاون مع
C8Indian Chemical Industries
1st Floor, Bhavani ChambersNr Times of India, Ashram Road
Ahmedabad 380009, Gujarat
كتالوج املعرض
C5 معرض الشرق األوسط للطالء 2017www.coatingsgroup.com
www.egekimya.com :املوقع اإللكترونيجهة االتصال في منصة العرض: بانو سيرفيتوغلو
تنتج Ege Kimya مجففات للدهانات والطالء وصناعات Ege Kimya األحبار وبفضل قدرتها اإلنتاجية الكبيرة، تعد
جففات إلى 56 دولة صنع في أوروبا، وتورد م ثالث أكبر محول العالم. إن Ege Kimya هي شريكك الذي تثق فيه ليلبي توقعاتك املستقبلية فيما يخص اجلودة والتقنية
العالية ودعم املوظفني أصحاب اخلبرة.
F32 El-Mohandes Company for
Manufacturing and Trading ModernChemicals
Alex-Cairo Desert Roadkm 71, Janaklis Entrance, km 15
Abou-ElmatamirBeheira 22732
مصرهاتف: 103 2452 45 20+. التحويلة 124
فاكس: 101 2452 45 [email protected] :بريد إلكتروني
www.el-mohandes.com :املوقع اإللكترونيجهة االتصال في منصة العرض: سيف الدين محمود
حشيشأنشئت El-Mohandes في عام 1998 على مساحة تبلغ
ذيبات اتلطة 65.000 م2. تنتج 90.000 طن سنويا من املودهانات اخلشب ودهانات السيارات في مصر.
تستورد 70.000 طن سنويا من املواد اخلام للدهانات واملذيبات لتستخدم في التصنيع والتجارة داخل السوق
املصري.
A3El Zain Chemicals Company
250 Acres Area, El Robiky EastBadr Industry City, Cairo
مصرهاتف: 1560 880 16 20+
www.elzaingroup.com :موقع إلكتروني
E3Erichsen GmbH & Co. KG
Am Iserbach 14Hemer, NRW 58675
أملانياهاتف: 9683-0 2372 (0) 49+فاكس: 6430 2372 (0) 49+
[email protected] :بريد إلكترونيwww.erichsen.de :املوقع اإللكتروني
جهة االتصال في منصة العرض: ماركوس موريتزتقوم ERICHSEN Germany بإجراء البحوث وتطوير
وتصميم معدات االختبار واملاكينات وتصنيعها للمجاالت التالية للتطبيق: االختبار املعدني لأللواح، واختبار السطح،
اختبار التآكل واختبار املواد. تورد منتجاتها إلى الشركات العاملة في قطاع تصنيع واستخدام الصفائح املعدنية،
والطالء، والورنيش وإنتاج البالستيك.
A7Euchemy Industry Co Ltd.
800, Fengtai Road, Industry Area,Linghu Town, Nanxun District
Huzhou City, Zhejiang Provinceالصني
هاتف: 2902567 572 [email protected] :بريد إلكتروني
H1AEurochem International FZE
Y14 Saif Zone, Sharjahاإلمارات العربية املتحدةهاتف: 71654 655 971+
فاكس: 71933 655 [email protected] :بريد إلكتروني
B8Fast & Fluid, The Tinting Company
Hub Van Doorneweg 31, Sassenheim,هولندا
هاتف: [email protected] :بريد إلكترونيwww.fast-fluid.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: بارتك جاناس، املدير اإلقليمي في الشرق األوسط وتركيا
تعد Fast & Fluid, The Tinting Company الشركة الرائدة عامليا في مجال معدات التوزيع والهز واخللط اخلاصة
بصناعة الدهانات. إن شبكتها من املكاتب على مستوى العالم، ومرافقها لإلنتاج وشركاء املبيعات واخلدمة على أمت
االستعداد لتقدمي املساعدة. تشارك في املعرض بالتعاون .Al Shihab Al Thahabi Tr. Co. LLC مع
J24Fenchem Biotek Ltd
19th Fortune Building,3 59th Hongwu Road, Nanjing210002، الصني
هاتف: 8888-668 8421 25 [email protected] :البريد اإللكتروني
www.fenchem.com :املوقع اإللكترونيجهة االتصال في منصة العرض: شني بينجكسي
مورد ذو كفاءة ملواد الطالء واملواد الالصقة وإضافات مسحوق الطالء واملعدات.
D1Firstruth Colorants China Co Ltd
1109 Famous City (A02)6 Xihu Road East Wuxi
Jiangsu Province 214011الصني
هاتف: 9970 8203 510 [email protected] :بريد إلكتروني
C10G&J Resources
Unit 502, 7300 Warden Ave, Markham,Ontario L3R 9Z6
كندا هاتف: 0146 805 514 1+
فاكس: 7009 604 905 [email protected] :بريد إلكتروني
/www.gandjresources.com :موقع إلكترونيجهة االتصال في منصة العرض: جورج غيندي
تأسست G&J Resources Inc في تورونتو، كندا في عام Yunnan 2001. وفي عام 2013، حصلت على ترخيص من
Xinli Co Ltd في الصني لتسويق منتجات التيتانيوم خارج آسيا.
ا. إن Yunnan Xinli هي شركة مصنعة متكاملة متام
يصنع ثاني أكسيد التيتانيوم مبعاجلة الكلوريد معاجلة ا أفضل ا واألعلى تقنية، وهذا يوفر بياض هي األكثر تقدم
للمنتج واستقرار أعلى.
H13Galstaff Multiresine SpA
Via Stazione 90, 210120 Mornago (Varese)إيطاليا
هاتف: 2628 8626 33 39+فاكس: 4279 3190 03 39+
[email protected] :بريد إلكترونيwww.galstaffmultiresine.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: ريبيتسي بيركارلوإن Galstaff Multiresine SpA هي شركة إيطالية تعمل
مع شركة شقيقة في البرازيل إلنتاج الراتنج االصطناعي ومساعدات الطالء ولها تاريخ طويل من اخلبرة يزيد عن
نصف قرن. ا كامال تستعني الشركة بشبكة مبيعات توفر دعم
للتسويق واملبيعات في أنحاء العالم.
N3General Mineral Industries Co
PO Box 20074 Industrial Area 1Ajman
اإلمارات العربية املتحدةهاتف: 7480101 6 971+
فاكس: 7480929 6 [email protected] :بريد إلكترونيwww.gmillc.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: أتش إل شاهتأسست General Mineral Industries Co منذ عام 2000 مبعرفة تقنية من قبرص، وتنتج نوعية عالية من كربونات الكالسيوم املترسبة للدهانات، املعاجني، واألحبار والورق
واملنظفات، ومستحضرات التجميل، واملطاط وتطبيقات املواد الغذائية / األدوية. ميكن تصنيع املنتجات حسب
الطلب لتناسب متطلبات العميل، وتوفر جودة ومواصفات ثابتة في أنحاء العالم.
M3DGreen Egypt Co
17 Gamal El - Fasahany StAlmaza, Cairo
1361 مصرهاتف: 0935 291 02 2+
G11AGuangzhou Jinzong Machinery Co Ltd
Hanxi Avenue, Panyu District, 77B Xieshi RoadGuangzhou, Guangdong 511495
الصنيهاتف: 0130 3990 20 86+
فاكس: 0129 3990 20 [email protected] :البريد اإللكتروني
www.jinzongmachinery.com :املوقع اإللكترونيجهة االتصال في منصة العرض: السيدة/ ريتشيل كيو
تأسست Jinzong في 1990، ولها أربع شركات تابعة مملوكة لها بالكامل، وهي متخصصة في تطوير مختلف
،PLC املعدات الصناعية وبحوث أنظمة التحكم باستخداموالتصميم الهندسي الصناعي والتركيبات، إلخ. أنشئ
قسم ماكينات تصنيع الكيماويات على مساحة 17,000 م2، وحصلت الشركة على العشرات من براءات االختراع.
نحت قاعدة اإلنتاج بها شهادة ISO9001-2008، وحصلت م
كتالوج املعرض
C4 معرض الشرق األوسط للطالء 2017www.coatingsgroup.com
للغاية، وتنظم Coatings Group املناسبات في شمال أفريقيا وآسيا وأمريكا الالتينية.
D11Comec
Via Consolini, 12Canossa, Reggio Emilia 42026
إيطالياهاتف: 30430 01732 39+
[email protected] :بريد إلكترونيwww.comec.eu.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: كريستينا كورديروإن Comec متخصصة في التشتيت والطحن، وتفخر
ا. مبرونتها التقنية وتوفير حلول فريدة ألكثر من 40 عامإن Comec التي تتعاون عن كثب مع Dromont تعمل مع
العمالء من أجل البحث وتطوير فرص جديدة ومبتكرة.
E8Coprabel SAavenue Vésale 20
Wavre 1300 بلجيكا
هاتف: 38280 102 32+فاكس: 38289 102 32+
[email protected] :بريد إلكترونيwww.coprabel.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: أ. نعمانيCoprabel، شركة بلجيكية منتجة للدهانات. العالمات
املسجلة: ®Coprabel’sEASY COLOR للدهانات (صبغات Coprabel’sNARI® معدنية، ذهبية، فضية ونحاسية) و
(معاجلة األخشاب). صنعني الدوليني للمواد اخلام إن COPRABEL عميل للم
املستخدمة في الطالء واألحبار واملواد الالصقة واملنظفات وصناعة البالستيك. املنتجات: مساحيق/معاجني معدنية،
زيت الصنوبر/ زيت بذرة الكتان، ملونات ومجففات، إلخ.
F17Covestro
Office 110 Dubai Science park Al Barsha South 2Dubai 503073
اإلمارات العربية املتحدةهاتف: 7301 4275 971+
[email protected] :بريد إلكترونيwww.covestro.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: سوبرامانيان كيه إس إس
ومببيعات بلغت أكثر من 12.1 مليار يورو في عام 2015 وتوظيف 15,800 موظف تعد Covestro من أكبر الشركات
املصنعة في العالم ملواد البوليمر عالية التكنولوجيا . وتستخدم منتجات وحلول الشركة املبتكرة في العديد
من التطبيقات الرئيسية التي تساعد على حتسني نوعية احلياة، مما يجعل العالم مكانا أكثر رفاهية.
C1Cristal
Malik Road, King's Road Tower, King Abdulaziz Road, 16th Floor, PO Box 13586, Jeddah 21414
اململكة العربية السعوديةهاتف: 260 248 122 966+
[email protected] :بريد إلكترونيwww.cristal.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: حسني باشيهاب
ا تعد Cristal واحدة من أكبر منتجي التيتانيوم، ومنتجرائدا لكيماويات التيتانيوم. تصنع منتجات للعديد من
الصناعات العاملية؛ منها الدهانات والطالء والبالستيك ومعاجلة املياه والهواء واحلفز الكيميائي والطاقة املتجددة
Cristal والبناء والكيماويات الصناعية وعمليات املعادن. إنهي أكبر شركة تابعة لشركة التصنيع الوطنية (تصنيع).
D15Cristoforo Tixe d'Arenzano Srl
Via Pian Masino 29Arenzano, Genova 16011
إيطالياهاتف: 9111271 (010) 39+
[email protected] :بريد إلكتروني
A10Datacolor AG Europe
Loorenstrasse 9Dietlikon 8305
سويسراهاتف: 3830 835 44 41+
[email protected] :بريد إلكترونيwww.datacolor.com :موقع إلكتروني
جهة االتصال في منصة العرض: شارلوت ويليتقدم Datacolor، الشركة الرائدة عامليا في مجال حلول
إدارة األلوان، البرنامج واألدوات واخلدمات لضمان لون دقيق للمواد واملنتجات والصور. في معرض الشرق األوسط
للدهانات 2017 سوف تعرض Datacolor أسرة منتجاتها اجلديدة Datacolor 800، أجهزة قياس الطيف الضوئي Benchtop Spectrophotometers ذات التفاوت القريب
واحلقيقي الوحيدة.
D19Defelsko Corporation
800 Proctor AveOgdensburg, NY 13669
الواليات املتحدة األمريكيةهاتف: 4450 393 315 1+
[email protected] :بريد إلكترونيwww.defelsko.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: تيري الروصنعة أمريكية رائدة في توريد تعد DeFelsko شركة م
معدات الفحص، وتفخر الشركة بأنها تصنع أجهزة من طراز PosiTector و PosiTest وتشمل سلسلة
PosiTector من اسات التبادلية لقياس سمك الدهان، والظروف البيئية والتلوث بامللح، وعسر املاء على الشواطئ وسماكة اجلدار. تشمل منتجات الشركة سلسلة منتجات
PosiTest من أجهزة القياس وأجهزة PosiTector 6000منخفضة الفلطية للكشف عن الثقوب املسمارية.
G10Deqing Tongchem Co Ltd
North 621 Yingxi Road Wukang Deqing ZhejiangProvince, 313200، الصني
هاتف: 0719 8792 135 [email protected] :بريد إلكتروني www.tongchem.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: ميشيل ليوإن Tongchem واحدة من املوردين األساسيني للصبغات في الصني، وتشمل منتجاتها صبغات أكسيد احلديد،
والصبغات العضوية وصبغة الكروم األصفر . إلخ. توفر ا مكافئة من املنتجات ألنواع منتجات الشركة أنواع
الصبغات التي تصنعها الشركات الكبيرة املشهورة، كما .ISO 9001:2008 أن الشركة حاصلة على شهادة
F24De Vree
Toekomstlaan 10Merksem/Antwerp 2170
بلجيكاهاتف: 00 43 641 3 32+
فاكس: 15 48 646 3 [email protected] :بريد إلكترونيwww.devree.com :موقع إلكتروني
جهة االتصال في منصة العرض: جيرت فان فيرويجنيتصمم De Vree وتبني معدات أوتوماتيكية وشبه
أوتوماتيكية للتعبئة باحلجم والوزن للسوائل الصناعية مثل الدهانات واملذيبات واففات وامللدنات واملعاجني واملواد
ا، وهي الالصقة، إلخ. تعمل الشركة منذ أكثر من 75 عامفضل لبعض الالعبني الكبار في هذه الصناعة. املورد امل
F31Diaf Pilvad A/S
Bakkegaardsvej 505, 3050 Humlebaekالدمنارك
هاتف: 535378 58 45+فاكس: 35278 58 45+
[email protected] :بريد إلكترونيwww.diaf.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: هانز بيتر هانسنتأسست Diaf في عام 1912، وهي شركة متخصصة في تصنيع معدات اإلنتاج للصناعات الكيماوية والتحويلية
والدهان واألحبار. واليوم، تعد Diaf واحدة من الشركات الرائدة عندما يتعلق األمر بالتخطيط والهندسة والتطوير
واإلنشاءات، واملعرفة التقنية والتركيب والبدء/التشغيل التجريبي للمشروعات املنفذة بنظام تسليم املفتاح
املذيبات واخلالطات والطواحني التي تعمل باخلرز، ومعدات التعبئة، إلخ.
Dynamechتشارك هذه الشركة في املعرض بالتعاون مع.Industries (M) Sdn Bhd and Jintai (M) Sdn Bhd
D11Dromont
Via Borzone 42Grinzane Cavour, CN 12040
إيطالياهاتف: 30430 01732 39+
[email protected] :بريد إلكترونيwww.dromont.com :بريد إلكتروني
جهة االتصال في منصة العرض: كريستينا كورديروإن Dromont شركة عريقة ورائدة منذ 1987 في مجال
خبرات التوزيع وأنظمة املصانع واإلنتاج والتطبيقات الصناعية، واملتخصصة جدا في مجال صناعة الدهانات.
قامت Dromont بتركيب اآلالف من األنظمة في أنحاء العالم، وقائمة عمالئها تشمل مجموعة ممتازة من
الشركات متعددة اجلنسيات.
K16Ege Kimya San Ve Tic AS
Ayazma Cd. No 37 Papirus Plaza Kat:10 KagıthaneIstanbul 34410
تركياهاتف: 4015 9746 54 90+
[email protected] :بريد إلكتروني
كتالوج املعرض
C3 معرض الشرق األوسط للطالء 2017www.coatingsgroup.com
جهة االتصال في منصة العرض: آيان ويليBIP (Oldbury) Ltd هي شركة مقرها اململكة املتحدة، وهي
شركة رائدة في تصنيع مجموعة واسعة من البوليمرات حتت العالمات التجارية Surkopak وSurkofilm. وتستخدم
راتنجات البولي يوريثان هذه خالل صناعة أحبار الطباعة، ا لصناعة األحبار القائمة على والتي صممت خصيص
املذيبات الستخدامها في العديد من تطبيقات تغليف ABC وتعبئة األغذية. وتشارك في املعرض مع شركة
.Chemical Exports
A1Biuged Laboratory Instruments
(Guangzhou) Co LtdRm 101, No 3 Sicheng Road
Gaotan Software Park, Tianhe DistGuangzhou
الصنيهاتف: 32955999 20 86+
فاكس: 32955818 20 [email protected] :بريد إلكتروني
C15 Black Diamond Material Science Co
Ltd F, Building C, Blue Ocean, Qianshan Road, Hefei/5
City, Anhui Province, PR الصنيهاتف: 1348 5513 138 86+جوال: 1348 5513 138 86+
[email protected] :البريد اإللكترونيwww.bdms.co :املوقع
جهة االتصال في منصة العرض: السيدة/ زانغ وينلونغإن صبغة أسود الكربون أساسية للطالء واألحبار وصناعات
البالستيك والتطبيقات، وهذا يشمل أكثر التطبيقات ا مثل دهانات السيارات وحبر الطابعة والناسخة تطور
واملواد البالستيكية لإللكترونيات.
L4Bonyan Kala Chemie Company
Unit 4, No 2, 13th Alley, Bokharest StTehran 1513754915
إيرانهاتف: 5557 8855 21 98+
فاكس: 6808 8871 21 [email protected] :بريد إلكتروني
www.bonyankala.com :املوقع اإللكترونيجهة االتصال في منصة العرض: عايدة هوشانغ
صنعة إن BKC, Bonyan Kala Chemie Co هي الشركة املموعة واسعة من املنتجات التي تغطي الراتنج غير
ستخدم في األحجار االصطناعية املشبع Ortho & ISO (املوالبالط والعوامات، وراتنجات األلكايد القصيرة والطويلة
واملتوسطة (التي تستخدم في صناعات الطالء)) بخبرة ا. متتد ألكثر من 20 عام
F1Brilliant Group Inc
750 National Court, Suite 100Richmond, California 94804
الواليات املتحدة األمريكيةهاتف: 4757 5771 141 1+
[email protected] :بريد إلكترونيfluorescentcolor.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: شون ميهاليك
توفر Brilliant Group مجموعة ذات جودة عالية من األصباغ الفلورية وامللونة، واأللوان واملشتتات وتركيزات الدهان واحلبر للسوق العاملي. وإلى جانب تركيزها على
الحتياجاتك شامال الرضا التام للعمالء، فإنها توفر حاللأللوان الفلورية.
L7Bühler AG
Gupfenstrasse 5Uzwil 9240
سويسراهاتف: 11 11 955 71 41+
grinding.dispersion@ بريد إلكتروني: buhlergroup.com اwww.buhlergroup.com/ :املوقع اإللكتروني
wetgrinding_dispersingجهة االتصال في منصة العرض: دانيال تروكسالر
تظهر Bühler في قطاع األحبار واملواد اإللكترونية والكيماويات الدقيقة - وفي جميع القطاعات التي حتتاج
إلى املعاجلات الرئيسية إلى الطحن املبلل والتشتيت، قدرة كبيرة ومعرفة تقنية عالية لتوريد أنظمة مخصصة
للعمالء. تضمن مراكز اخلدمة احمللية أوقات استجابة سريعة ومستوى عال من الكفاءة في مصانع Bühler في
جميع أنحاء العالم.
E7Cabot Specialty Chemicals Inc
PO Box 17894, Jafza South, Dubaiاإلمارات العربية املتحدةهاتف: 058 8806 4 971+
فاكس: 057 8806 4 [email protected] :بريد إلكتروني
www.cabotcorp.com :املوقع اإللكترونيجهة االتصال في منصة العرض: كارسنت سبيلبيرغ
تعد Cabot من الشركات الرائدة عامليا في مجال توريد األكسيدات املعدنية املدخنة، ومنتجات أسود الكربون،
ومواد التشتيت موعة كبيرة من الصناعات التي تشمل الدهانات واإلنشاءات، واملواد الالصقة وموانع التسرب وأحبار
الطباعة والتعبئة والتغليف ومنتجات الرعاية الصحية واملنتجات الصيدالنية. تعرض الشركة منتجاتها في
- H.A.K Industrial Chemicals (LLC) املعرض بالتعاون مع.Kanoo Group إحدى شركات
K18Changzhou Longxin Machinery Co Ltd
Xixiang, Hengshanqiao Town, Wujin District, Changzhou, Jiangsu 213119
الصنيهاتف: 3798 8866 519(0) 86+
فاكس: 8716 8860 519(0) [email protected] :بريد إلكتروني
www.hbhj.com :املوقع اإللكترونيجهة االتصال في منصة العرض: مس ياو
تأسست Longxin في عام 2001، ومنت وأصبحت شركة ا ومساحة عمل تبلغ كبيرة تضم أكثر من 150 موظف25.000 متر مربع وأكثر من 10 مجموعات من وحدات
املعاجلة اآللية. تشمل املنتجات األساسية لشركة Longxin مطحنة رمال ومطحنة حبوب ومطحنة ثالثية
اللفات وأجهزة تشتيت عالية السرعة.
J16Chemfilt
S No 881, 882/1+2, 882/3+2, 883, 885 Near New Water
Tank of G.I.D.C., Phase-IV, Next to Atlanta Electricals LtdAnand, Gujarat 388325
الهندهاتف: 36846 6922 912+
فاكس: 36850 6922 [email protected] :بريد إلكتروني
www.chemfilt.com :املوقع اإللكترونيإن Chemfilt وهي شركة للمشاريع الهندسية منذ عام
1985، قامت ببناء مصانع رائدة في صناعة الدهانات والراتنجات على الصعيد العاملي. مطاحن الرمال واففات
السريعة املغزلية، واففات الفراغية الدوارة ومعدات التصنيف وأنظمة النقل الهوائي، وأنظمة الطحن وأنظمة
التصنيف املرتبطة مبعايير اجلودة الدولية، وكل هذه املنتجات تظهر قدراتنا القوية في هذه ااالت.
E18AChemieland International Co Limited
159, North Wenshui Road, Anqiu Economic Development Zone Shandong Province، الصني
هاتف: 7628 8612 532 [email protected] :البريد اإللكتروني
www.chemieland.cn :املوقعجهة االتصال في منصة العرض: وو هوانلي
إن Chemieland International Co Limited متخصصة في صناعة وتسويق أنواع مختلفة من املاكينات ومعدات
اتبرات، والتي تتعلق جميعها بإنتاج طالءات مختلفة ومعاجني اجلدران ومسحوق املالط واملواد الالصقة.
G1Chemours International Operations
SarlChemin du Pavillon 2,
CH-1218 Le Grand-Saconnex-Genevaسويسرا
هاتف: 248498 470 [email protected] :بريد إلكتروني
B21Coatings Group
Polymers Paint Colour Journaldmg::events (MEA) Ltd
Quartz House20 Clarendon Road
RedhillSurrey RH1 1QXاململكة املتحدة
هاتف: 855000 1737(0) 44+فاكس: 855034 1737(0) 44+
بريد إلكتروني: [email protected]
www.coatingsgroup.com :موقع إلكترونيجهة االتصال في منصة العرض: كيز تشني، مدير
مبيعاتاموعة؛ سو تايلور، محرر
ا من معارض إن Coatings Group تنظم عددا ناجحالدهانات واملؤمترات واملناسبات في شتى أنحاء العالم
وكذلك تنشر PPCJ وشقيقتها مجلة APCJ. PPCJ هي الة الرائدة في مجال صناعة الطالء في جميع أنحاء أوروبا
APCJ والشرق األوسط وشمال أفريقيا، في حني تكرسنشاطها لصناعة الدهانات في جنوب شرق آسيا واحمليط
الهادئ وأستراليا والصني.وكذلك تنظيم معارض الشرق األوسط للدهانات الناجحة
كتالوج املعرض
C2 معرض الشرق األوسط للطالء 2017www.coatingsgroup.com
E6ABC Chemical Exports PVT Ltd
PO Box 8330 Saif ZoneSharjah 830000
اإلمارات العربية املتحدةهاتف: 5579612 6 971+
فاكس: 5579614 6 [email protected] :البريد اإللكتروني
www.abcchemical.com :املوقع اإللكترونيجهة االتصال في منصة العرض: جانيشان
مجموعة ABC الكيميائية هي واحدة من أكبر شركات التصدير واالستيراد والتوزيع، والتي تقوم بتوريد املواد اخلام
اخلاصة بصناعات أحبار الطباعة والطالء، والبالستيك، والراتنجات، ومواد التعبئة والتغليف. وتشمل تشكيلة
منتجاتها األصباغ، والراتنجات، واملواد اخلام اخلاصة بالراتنج، وامللدنات، وراتنجات البولي يوريثان، والنيتروسليلوز وغيرها
من املنتجات. وتضمن الشركة منتجات ذات جودة عالية وبأسعار تنافسية مدعومة بخدمات ما بعد البيع.
F19AGC Chemicals Europe
Zuidplein 80 - H-TowerAmsterdam 1077XV
هولنداهاتف: 804174 208 31+
فاكس: 804188 208 [email protected] :بريد إلكتروني
www.agcce.com :موقع إلكترونيجهة االتصال في منصة العرض: بن رونهار
AGC Chemicals Europe وشركتها الفرعية AGC تقدممنتجها ®LUMIFLON وهو عبارة عن فلورو-راتنج لتصنيع
الدهانات والطالءات عالية املتانة التي توفر قوة حتمل للعوامل اجلوية واحلماية من التآكل. سوف حتتفظ املباني
وغيرها من الهياكل مبظهرها األصلي لسنوات (> 25 سنة). تتوفر راتنجات ®LUMIFLON للدهانات التي تعتمد في
أساسها على املاء أو على املذيبات ومساحيق الطالء.
B8 & B9Al Shihab Al Thahabi Tr Co LLC
PO Box 30681, Sharjah, UAEBuhairah Corniche
Al Durrah Tower, Office No 901Sharjah 30681
اإلمارات العربية املتحدةهاتف: 8301 556 6 971+ اإلمارات العربية املتحدةهاتف: 8301 6 655 971+
فاكس: 8302 6 655 [email protected] :بريد إلكتروني
www.thahabi.ae :املوقع اإللكترونيجهة االتصال في منصة العرض: السيد رحيم جمال،
املدير العامتأسست شركة الشهاب الذهبي في اإلمارات العربية املتحدة ولديها خبرة طويلة في املعامالت التجارية في
شبة اجلزيرة العربية. تغطي عمليات الشركة دول مجلس التعاون اخلليجي. حظيت شركة الشهاب الذهبي بسمعة
طيبة كونها من أفضل موردي املواد الكيماوية واآلالت واملعدات الالزمة لصناعة الدهانات والطالء.
K5Anadolu Mikronize Madecilik San Ve
Tic AS
Drug Reis Mah.Tekstilkent Cad.Koza Plaza A Blok No: 17, Kart: 5 Esenier
Istanbul 34235Turkey
هاتف: 5552 208 532 90+ / 1131 583 21 [email protected] :بريد إلكتروني
G15Anhui Hengyuan Chemical Co Ltd
No 16, Zijin Road Circular Economy Zone Hui Zhou District
Huangshan City, Anhui 245900الصني
هاتف: 3515800 559 86+فاكس: 3515205 559 86+
373810386@ بريد إلكتروني: qq.comاwww.0086xy.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: جيانغ شياوخهإن Anhui Hengyuan Chemical هي مورد معتمد خلامات
تصنيع الدهانات وإضافات مساحيق الطالء، واملذيبات التفعالية، ودهانات األرضيات والطالء واملركبات واملواد
الالصقة وعوامل الربط باستخدام السيالن، إلخ.
B12Anhui Shenjian New Materials Co Ltd
No 8 Baoshun RoadQiaobei Industrial Park
Wuhu, Anhui 241008الصني
هاتف: 6012 963 1390 86+فاكس: 7878 3531 55 86+
[email protected] :بريد إلكترونيwww.shen-jian.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: تونغ مينغإن شركة Anhui Shenjian New Materials Co, Ltd واحدة
من أكبر الشركات املنتجة لراتنج البوليستر املشبع لتصنيع مساحيق الطالء في العالم. تتمتع الشركة
ا في مجال البحث والتطوير وإنتاج بخيرة تصل إلى 30 عامراتنج البوليستر. في عام 2016، وصل حجم مبيعات راتنج
البوليستر إلى 120.000 طن.
B12Anhui Hengyuan Chemical Co Ltd
No 16, Zijin Road Circular Economy Zone Hui Zhou District
Huangshan City, Anhui 245900الصني
هاتف: 3515800 559 86+فاكس: 3515205 559 86+
373810386 بريد إلكتروني: qq.com@اwww.0086xy.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: جيانغ شياوخهإن Anhui Hengyuan Chemical هي مورد معتمد خلامات
تصنيع الدهانات وإضافات مساحيق الطالء، واملذيبات التفعالية، ودهانات األرضيات والطالء واملركبات واملواد
الالصقة وعوامل الربط باستخدام السيالن، إلخ.
E6Asha Penn Color Pvt Ltd
Asha House, Plot no 808/CDr B A Road, Dadar TT
Mumbai
الهندهاتف: 0020 414 222 91+
فاكس: 7190 413 222 [email protected] :بريد إلكترونيwww.ashapenncolor.com :املوقع اإللكتروني
جهة االتصال في منصة العرض: م ب سنيAsha Penn Color Pvt Ltd (APC) هي مشروع مشترك
بني شركة Asha Dispersions Pvt Ltd مبومباي في الهند وشركة Penn Color Inc بالواليات املتحدة األمريكية.
تنتج شركة APC الرقائق امللونة، وهي عبارة عن تشتيت لألصباغ الصلبة املركزة، وتعتمد على راتنجات مختلفة مثل النيتروسليلوز، والفينيل، واالكريليك، وبوتيرال بولي
فينيل، ومادة البولي أميد، وبوتيرات اسيتات السليلوز. كذلك تنتج شركة APC مستحضرات األصباغ في الشكل
السائل لالستخدامات النهائية املتعددة، مثل الطالء الصناعي، وورنيش اخلشب، ودهانات السيارات وغيرها
ABC من االستخدامات. وتشارك في املعرض مع شركة.Chemical Exports
E3ATP Engineering BV
Palmpolstraat 56CH Almere 1327
هولنداهاتف: 165 5316 36 (0) 31+
فاكس: 794 5313 36 (0) [email protected] :بريد إلكتروني
www.atpengineering.nl :املوقع اإللكترونيجهة االتصال في منصة العرض: مايكل دو بروجني
ا آالت اإلذابة العالية تصمم ATP وتورد على مدار 28 عامواخلالطات واملطاحن، وخطوط التعبئة الكاملة للدهان
ورت والطالء والالصق والبالستيك والصناعات الكيماوية. طالشركة أكثر من 70% من ماكيناتها، وصنعتها داخل
مصانعها. تقوم الشركة بتوريد منتجاتها على الصعيدين احمللي والدولي لعمالئها. تشارك الشركة في املعرض
.Erichsen GmbH بالتعاون مع
J5BEVS Industrial Co Ltd
Rm 1818, Dongcheng Plaza No 3 Huangpu Road EastGuangzhou, Guangdong 510700
الصنيهاتف: 7697 2219 20 86+
فاكس: 7673 2219 20 [email protected] :بريد إلكتروني
www.bevsinfo.com/en/index.html :املوقع اإللكترونيجهة االتصال في منصة العرض: ويلسون تان
إن شركة BEVS حاصلة على شهادة األيزو في تصنيع أجهزة االختبار املستخدمة في مجال الطالء والدهانات
نعت أجهزة اختبار ومراقبة اجلودة والراتنجات واألحبار. صمبا يتسق مع أعلى املعايير والتكنولوجيا املتطورة. ستكون
BEVS أفضل شريك لك في توفير احلل الكامل ألجهزة االختبار وأدوات الفحص.
E6BIP (Oldbury) Ltd
Tat Bank Road West Midlands, B69 4NHاململكة املتحدة
هاتف: 1555 544 121 44+فاكس: 6148 552 121 44+
[email protected] :البريد اإللكترونيwww.bip.co.uk :املوقع اإللكتروني
كتالوج املعرض
C1 معرض الشرق األوسط للطالء 2017www.coatingsgroup.com
مة: بكم يسعدني اجلهة املنظ أرحب أن
نيابة أخرى، مرة
في زمالئي، عن
الشرق معرض حلضور واملعارض للمؤمترات الدولي دبي مركز
.dmg events شركة تنظمه الذي للطالء 2017 األوسط دبي، في للطالء 2017 األوسط الشرق معرض اليزال
في املتخصصة الوحيدة الفعالية اآلن، 24 الـ عامه في
اخلام املواد ملوردي واخلليج األوسط الشرق منطقة في الطالء
الطالء. بصناعة املرتبطة املعدات ومصنعي
إنتاج في مستمرا ا منو األوسط الشرق منطقة تشهد
شك، بال للطالء، األوسط الشرق معرض ويعتبر الطالء،
على الطالء بصناعة املتعلقة الكبرى الفعاليات أحد
اخلام املواد ملوردي رائعة فرصة يوفر حيث العالم مستوى
االختبار. وأجهزة التصنيع ومعدات الكيماوية،
ثالثة مدى على للطالء األوسط الشرق معرض يستمر
على التعرف في الوقت من املزيد قضاء لك وسيتيح أيام
أو ثانية بزيارة القيام فرصة لك يوفر كما األعمال متطلبات
احتياجاتك. ومناقشة ملقابلتهم زمالئك استدعاء
2017 للطالء األوسط الشرق معرض سيكون كما
مبا والدهانات الطالء تقنيات أحدث لترويج وسيلة بدبي
التصنيع واحتياجات والصناعية البيئية االحتياجات يلبي
استفادة أقصى لتحقيق الرائعة فرصتك إنها املنطقة. في
دين املور ممثلي ومقابلة هذا الدولي التواصل منتدى من
العالم. مستوى على الرائدة املصنعة والشركات
التقدميية العروض من سلسلة العارضون سيقدم
وجميع القاعة، داخل والثاني األول اليومني خالل لألعمال
فال مجانا؛ التقدميية العروض هذه حلضور مدعوون الزوار
على مباشر بشكل لالطالع الرائعة الفرصة هذه تفوت
واحللول. والتقنيات التطورات أحدث
اليومية "الصحيفة إصدار ا أيض بالذكر اجلدير من
تسليط يتم حيث يوم كل الواسعة الشهرة ذات للمعرض"
الزائرين توجيه في تسهم التي واآلراء األخبار على الضوء
األعمال فرص من استفادة أقصى حتقيق من يتمكنوا حتى
احملتملة.
في سنويا للطالء األوسط الشرق معرض تنظيم يتم
سينعقد حيث القاهرة في سنتني كل تنظيمه ويتم دبي
11-12 من الفترة في القاهرة في والعشرون الثالث املعرض
واملعارض للمؤمترات الدولي القاهرة مركز في 2017 أكتوبر األعمال عالقات نطاق لتوسيع أخرى فرصة لك يتيح مما
املنطقة. هذه في لديك
زيارتكم من واملكاسب النجاحات أفضل حتققوا أن أمتنى
القادمني لزوارنا أمتنى كما للطالء األوسط الشرق ملعرض دبي. في ممتعة إقامة اخلارج من
فوكس إيان الرئيس نائب
شركة dmg events (MEA) احملدودة
معرض الشرق األوسط للطالء 2017 مركز دبي الدولي للمؤمترات واملعارض، اإلمارات العربية املتحدة
13 – 15 مارس 2017
مرحبا بكم في دبي
احملتوياتC18 A-Z العارضون
C20 العثور على منتج
C23 عروض األعمال
C24 مخطط أجنحة املعرض
صورة الغالفتعد شركة أنظمة التلوين (TSC) أحد موفري
حلول التلوين الشاملة املرتبطة بصناعة الطالء
والدهانات واملواد املركبة. يقع مقر الشركة في
اململكة العربية السعودية وتقدم خدماتها
للعمالء في منطقة الشرق األوسط وشمال
أفريقيا، ومنطقة آسيا واحمليط الهادئ، وأوروبا على
مدى أكثر من عقد من الزمان. وقد استطاعت
TSC في غضون فترة قصيرة من إنشائها تأسيس
معيار قياسي في هذه الصناعة من خالل
التشكيلة الواسعة التي توفرها من ملونات
نقطة البيع ومعاجني الصبغات املصنعة داخليا مبا
يناسب التطبيقات املعمارية والصناعية.
H2 لوا بزيارتنا في اجلناح رقم تفض
CREATING TOMORROW’S SOLUTIONS
MEET THE HIGHEST EXPECTATIONS
Building better, higher, faster, safer, more economically and sustainably. Whatever your expectations, construction chemicals are key to meeting them. WACKER off ers you a proven, innovative and unique portfolio of binders and additives. • VINNAPAS® dispersible powders improve the performance of mortars and other cementitious systems. • VINNAPAS® dispersions, based on vinyl acetate-ethylene (VAE), excel in paints that are low-VOC and low in odor,
adhesives that bond to a wide range of substrates and sealants that are fl exible and have high fi ller content.• SILRES® BS silicone resins are the basis of extremely long-lasting paints, whereas SILRES® WH silicone resin
emulsions protect wood from water and from the damage it can cause. • VINNOL® resins, HDK® pyrogenic silica and SILRES® for industrial coatings enhance the processing as well as the
fi nal coating properties in a variety of applications. To fi nd out how we can be a growth driver for your business, please visit us at MECS or at www.wacker.com/construction
Wacker Chemicals Middle East FZE, Dubai Silicon Oasis, Dubai, United Arab EmiratesTel. +971 4 709-9999, [email protected], www.wacker.com, www.wacker.com/socialmedia
DUBAI, UAE March 13 – 15, 2017Hall Sheik Saeed, Booth F06
We supply material for good ideas
NINE DYNASTIES LEAVE
THEIR MARK. AND FOUR
HOFFMANN GENERATIONS
PRESERVE THEM.
AKTISIL WW, our newly developed product, will open up
a whole new range of properties for your products. It is
ideal as a matting fi ller in dispersion-based clear wood
varnishes. You can use AKTISIL WW alone as well as in
combination with other matting agents. AKTISIL WW
provides enormous advantages as a functional fi ller:
it can be easily dosed and mixed to facilitate your varnish
production, it provides high transparency even on dark
wood types, it has a good matting effect and very good
resistance to water and stains, which together give your
product a completely new profi le of properties. AKTISIL
WW is a new surface-treated Neuburg Siliceous Earth
product. We have the know-how. Use it.
FUNCTIONAL FILLERS FOR COATINGS
HOFF
MAN
N M
INER
AL G
mbH
• P.O
. Box
14
60 •
8661
9 N
eubu
rg ( D
onau
) • G
erm
any
• Pho
ne +
49 8
431
53-0
• Fa
x +4
9 84
31 5
3-33
0 • w
ww.
hoffm
ann-
min
eral
.com
or i
nfo@
hoffm
ann-
min
eral
.com
PLEASE VISIT US AT:
THE EUROPEAN COATINGS SHOW 2017
IN NUREMBERG, APRIL 4–6, BOOTH 4-614