Company Profile
&
Product Details
Applied Electro Magnetics Pvt Ltd.
Works : D-19, Sector – 3, NOIDA – 201 301, U.P., India Ph: 91-120-3053920, 2543774, Fax: 91-120-2543774, 2536579
R&D Unit : B-147, Sector 63, NOIDA – 201 301, U.P., India Ph: 91-120-3040654, 3040648, Fax: 91-120-3914877
Email: [email protected]; Web : http://www.aemindia.com
Page 2 of 38
COMPANY PROFILE AND PRODUCTS DETAILS
INTRODUCTION
o Applied Electro-Magnetics Pvt. Ltd. (AEM) is a professional company
having ISO 9001: 2000 certification.
o Established in I975, AEM has distinguished itself as a premier company
in Embedded Systems and Solutions.
o Over the years, AEM has done a number of successful customized
projects in the high technology areas.
o AEM specializes in custom-built products /projects, value adding over the
existing hardware and software platforms, turnkey projects for the IAF
and third party product support.
o The company has been providing turnkey solutions to a number of
Government, Private Sector, Public Sector and other Organizations.
DOMAIN OF EXPERTISE o Data Communication
o Digital Voice Communication
o Digital Signal Processors
o Micro-Controllers
o Telemetry using Fiber Optic and Wireless Connectivity
o Embedded Computers
o Network Appliances & Thin Clients
o Defense Electronics
o Customized Industrial Controllers and Simulators
o Modernization of legacy systems to deal with obsolescence
Page 3 of 38
PROJECTS / PRODUCTS DEVELOPED AND
OPERATIONALIZED BY AEM
DEFENCE
• VoIP based Voice Communication and Control System - which is taking
care of voice communication setup in C4I of the IAF.
• Ground Tester for Mirage 2000 & Sukhoi - 30 MKI aircraft for IAF - These
have been already supplied and working with various squadrons of IAF
for last one to two years.
• Integrated Voice Communication & Control Systems for CRC / ADDCs /
GCIs / AFMLUs / BADCs in IAF. Systems supplied more than two
decades to IAF are still working satisfactorily round the clock in various
units of IAF.
• Flight Data & Acquisition System for MIG-27, Mig-21 Bison, AN-32,
Mirage - 2000 Aircraft of IAF – Already in operation with various
squadrons of IAF for 2 to 10 years.
• Remote Radar Data Display for the IAF.
• Communication Processor for ADHS for the IAF.
• Data Acquisition System for TROPO System used by IAF - Satisfactorily
working in all Tropo units of IAF for over two decades.
• Automated Air Traffic Control System for the IAF – This is working in 11
Air Bases of Indian Air Force for over a decade.
• Emulated Disc Driver for Aircraft maintenance for Mirage-2000 aircraft
Page 4 of 38
PROJECTS / PRODUCTS DEVELOPED AND
OPERATIONALIZED BY AEM
(Contd…)
GOVT AND PRIVATE SECTOR
• Single Section Digital Axle Counter for Indian Railways
• Multi Section Digital Axle Counter for Indian Railways
• Train Actuated Warning Device for Indian Railways
• Signal Analysis for Pratt & Whitney, USA
• Circular Weaving Machine for M/s. Lohia Starlingers Ltd.
• Controller for Draw Texturising Machine for M/s. Lohia Starlingers Ltd.
• Vehicle Tracking Unit
• Automated Production Monitoring System for on-line ERP system
• Sequence of Events Recorder for Siemens Limited for monitoring the
1024 events in a Turbine system with 1 msec. time stamp.
Brief details of some of these are given below
Page 5 of 38
AIRCRAFT TEST
&
GROUND EQUIPMENTS
Page 6 of 38
AIRCRAFT TEST & GROUND EQUIPMENTS
o AEM entered into Aircraft Test & Ground Equipment as part of Indigenization
effort by IAF. o Ground Test Support Systems are developed for the design validation and
verification of commercial and military aircraft. o The Ground Test Support Systems evaluate various electronic systems of an
aircraft, which in turn check the hydraulics & Mechanical assemblies. o Systems are highly modular test system used for interactive or automatic
testing from software– testing to flight-testing. o These systems are based on Windows technology and real-time front-end
systems. o Ground support equipment for Miirage-2000/ SU-30MKI is used for the 1st line
or 2nd line maintenance.
o Equipments are used to either investigate the cause of a malfunction observed in flight or to perform overall checks following replacement of an item of equipment.
o The test set may be connected to the aircraft wiring by means of dummy units,
which facilitates setting up, and serves to validate aircraft wiring. The test set may also be connected directly to the equipment to be checked.
o Equipments are designed to be durable, rugged and based on state-of-art
technology for achieving better display, precision and accuracy. o Equipments are constructed from light-weight metal frame/fiber, which
accommodates all elements of the circuitry. o The test equipments have got circuitry required for connection to the Aircraft,
maintenance and monitoring of various signals. o Basic Features
• Modular combination of sub-systems and interfaces • Distributed scalable processing power • Distributed data management • Separated user interface on PC • Wide range of I/O interfaces • Control and remote control via network • Automatic test run via test scripts • Fast turnaround time for test modifications
Page 7 of 38
o I/O Interfaces • Serial (RS232, RS 485…) • Analog / Digital • GPS / IRIG-B • Ethernet / GPIP • Fiber optic links
o Displays • 3”-17” LCD Display • Numerical Display • Graphical Display • LED Display
o Environmental
• Vibration(non-Operating): 50Hz to 400Hz, 2g • Ambient Temperature(Operating): -8 to 50 °C • Temperature (Storage): -10 to 60 °C • Altitude: 0 to 2,000m above sea level • Humidity, Relative: up to 95% at 40°C.
o Around 15 lines of Test & Ground Equipment are supported now. Brief specifications of these testers are elaborated.
o These Ground Testers have been validated by IAF after prolonged use and trials
in the field. Many of these testers are in operational use with the IAF. o Design of Simulators/emulators for ‘Aircraft Assembly under Test’ is in
progress, which would help in testing these Ground Equipments under Factory conditions.
Page 8 of 38
SLAT/SHOCK CONE SAFETY TEST SET
o Slat/Shock Cone Safety Test set is used to carry out first line testing of Shock
Cone/Slat box functions, since these are not subject to built-in testing on
Mirage-2000 Aircrafts.
o Test set is used to perform the following:
• Automatic mode Tests:
Checking the shock cone & slat power supply safety devices.
Overall checking of Thermal Battery control; circuits in shock cone
/slat box and the power relay downstream of the box.
• Manual Mode
Overall and analytical checking of the slat, shock cone, warning horn,
scoop deflector, engine & RPM display controls.
Analytical checking of the Thermal Battery control.
Checking of the continuity of AP-EFCS connection.
It also displays intermediate points taken from various control devices
in the Shock Cone/Slat box & data originating from outside the shock
cone/slat box.
�P/PS/AOA signals required by the tester are supplied either by EFCS
unit 3 or Air Data Simulating Test Set MEB010.
Pitch Load signals are either supplied by EFCS unit 2 or Pitch Load
generator Unit of MEB009.
Page 9 of 38
o Number of Input/Output signals processed: ~200 I/Os.
o Analog Measurement Specifications:
• Range: +/- 19.99V.
• Display: – 3-1/2 Digit + Sign.
• Resolution: 1 LSB=10 mV.
o Analog Stimuli Specifications:
• Range: +12.5V.
o Chronometer Specifications:
• Display – 3 Digits.
• Range 0.1 to10.0 sec
o Primary Operating Power 28V DC
o Testing for Complete Task cards can be automated using VB Scripts for optimal
use of trained manpower.
o This Test Equipment can be enabled for connection to devices including
handheld devices on networks using Ethernet, Fibre-optics, Wi-fi or USB port
for purposes like reporting, data collection & diagnostics.
Page 10 of 38
SERVO ACTUATOR TEST SET
o Servo Actuator Test set is used to carry out first line testing of Elevon or Rudder Servo Actuator of Mirage-2000.
o Test set is used to perform the following:
• Automatic Test Selection based on connections via aircraft circuitry.
• Manual Test Selection for direct connection to Servo actuator. • Chronometer Display. • Voltmeter Display. • Manual Control of Slaving Mode, Normal/Standby/Backup
motors engagement & Stimulus Generation, vibrator Control & Safeties.
o Analog Measurement Specifications:
• Range +19.99V. • Display – 3-1/2 Digit + Sign. • Resolution: 1 LSB=10 mV.
o Analog Stimuli Specifications: • Stimuli Range: + 12.5V
o Chronometer Specifications: • Display – 3 Digits. (Based on Unit
selected). • Range 0.1 to10.0 sec • Functions Supported :
Velocity of Displacement: Unit mm/s. Chronometer: Unit ms. Velocity of Backup Engine: Vcc/s.
o Primary Operating Power 28V DC
Page 11 of 38
o Testing for Complete Task cards can be automated using VB Scripts for optimal
use of trained manpower.
o This Test Equipment can be enabled for connection to devices including
handheld devices on networks using Ethernet, Fibre-optics, Wi-fi or USB port
for purposes like reporting, data collection & diagnostics.
Page 12 of 38
SUKHOI AIR INTAKE RAMP TEST EQUIPMENT
o Test Sukhoi Air Intake RAMP Test Equipment is used for maintenance of Air
Intake System of Sukhoi Aircraft (SU-30 MKI).
o Test set is used to perform the following:
• Checks the Air intake RAMP of the SU-30 MKI aircraft for serviceability.
• Generates & Measures the frequency signals corresponding to the
movement of the Air Intake RAMP.
• Provides Mach On signal to the aircraft. The Mach On signal artificially
simulates the breaking of the Mach barrier.
• Displays the reading of various voltages coming from the aircraft on the
front panel.
• Conditions the analog signals from various sensors and switches them for
proper analysis.
• Test Set possesses automatic self calibration feature.
o Analog Measurement Specifications:
• Range +19.99V.
• Display – 3-1/2 Digit + Sign.
• Resolution: 1 LSB=10 mV.
Page 13 of 38
o Analog Stimuli Specifications:
• Frequency O/P: 0 to 4 KHz.
o Primary Operating Power 27V DC
o Testing for Complete Task cards can be automated using VB Scripts for optimal
use of trained manpower.
o This Test Equipment can be enabled for connection to devices including
handheld devices on networks using Ethernet, Fibre-optics, Wi-fi or USB port
for purposes like reporting, data collection & diagnostics.
Page 14 of 38
SENSOR TEST SET
o Sensor Test Set is used for measuring sensors of following Units of Mirage-2000
• Pitch AFU. • Roll AFU. • Rudder AFU. • Position of elevon & rudder sensors. • Aerodynamic parameters (AOA, �P & PS).
o Performs absolute measurements of a channel and comparisons of 2, 3 or 4 different sensors in order to detect inter-linearity faults.
o No of Analog Channels : 72 o ADC Resolution: 14 Bit. o Primary Operating Power: 28V DC o Analog Input Specifications
• Range + 12.5V • Display – 4-1/2 Digit + Sign. • Resolution: 1 LSB=1 mV.
o Pc enabled version of this Test Equipment, which would support networking & automated testing, is under progress.
Page 15 of 38
AIR DATA SIMULATION TEST SET
o Air Data Simulation test set simulates the PS, ∆P and AOA analog data for processing by EFCS unit 3 and Slat/ Shock cone safety test set of Mirage-2000.
o This simulation provides the means of actuating the slats, shock cones and air
scoops and activate certain auxiliary functions located in the slat/shock cone rack.
o The value of stimuli generated is indicated on displays:
• In degrees (Pitch-up or Pitch down) for AOA. • In mbar for PS & ∆P.
o The flight envelope defined by the PS and ∆P is represented in the form of three parameters – Altitude, Speed & Mach. The value of these parameters is indicated on Displays:
• In feet for Altitude. • In knots for Speed. • In tenths of Mach for Mach.
o Analog Stimuli Specifications
• Analog Output Range: +12.5V
o Primary Operating Power 28V DC o Other Power Supplies + 15V DC o Pc enabled version of this Test Equipment, which would support networking &
automated testing, is under progress.
Page 16 of 38
SU-30 FBW TESTER
o Sukhoi Fly-By-Wire (FBW) Tester is used for maintenance of FBW system of Sukhoi Aircraft (SU-30 MKI).
o Test set is used to perform the following:
• Checks the Power Supply Voltages of Main Power Supply of FBW System (BP – 95 – 02)
• Shapes the event & DC signals received in binary (digital) mode. • Provides Switching and suitable indicators of the preset data (digital)
signals, event signals and the commands coming from FBW system. • Generates commands and preset signals for FBW System based on User
inputs. • Conditions the analog signals from various sensors and switches them for
proper analysis in FBW system. • Provides Quantitative estimation of Quorum Elements and other analog
signals received from aircraft. • Switches the signals and command circuits to internal and external
voltmeter for measurements. • Executes Diagnostic commands for FBW System like Test mode operation
and Ground Check.
o Analog Measurement Specifications: • Range +199.99V. • Display – 4-1/2 Digit + Sign. • Resolution: 1 LSB=10 mV.
o Primary Operating Power 27V DC o Other Power Supplies 5V, + 15V.
Page 17 of 38
ELECTRO-PYRO CIRCUIT TESTER
o Electro Pyro Test set is ‘Support Test Equipment’ used for checking pyrotechnic munitions & equipments.
o Pyrometer is designed for measurement of low value resistance in the range of
0.01 to 20.00 ohm using 4-wire measurement o As part of safety measure, very low value of excitation current (<5 mA) and
open circuit voltage (10 mV) is ensured at the probe tips as per the specification.
o Accuracy
• 0.01 to 0.10 ohm range: + 10 %. • 0.11 ohm to 1.00 ohm: + 5%. • 1.01 ohm to 10.00 ohm: +3 %. • 10.01 ohm to 20.00 ohm: + 2%.
o Electrical • Operating Power 1.2 x 4 (4.8 V Rechargeable Battery). • Resistance Range: 0.01 ohm to 20.0 Ohm. • Excitation for Resistance measurement
i. Current: < 5 mA. ii. Voltage: < 10 mV.
o The test set provides self-test & Calibration features to ensure the test set is
operational.
Page 18 of 38
DISPENSER TEST SET
o Dispenser Test Set is provides flight line testing capability for the aircraft dispensers of the countermeasures Dispensing set of Mirage-2000.
o During flight-line check out, the test set connects directly to the breech plate output (contact pins) of a dispenser to detect acceptable levels of firing pulses.
o Overall function of the dispenser is to receive signal command from the countermeasures system and generate high current fire pulses sequentially routed to cartridges in the magazines attached to the dispenser.
o This test set receives and evaluates Squib high current firing signals for proper sequence and adequate firing power. Visual indications for test results are provided.
o Primary Operating Power 28 Vdc
o Firing Pulse Specifications 28-32 Vdc, 4.25A, 28msec pulses
o The test set provides Display, Current Sense & Counter self-test features to ensure the test set is operational.
Page 19 of 38
STRAY VOLTAGE TEST SET
o Stray Voltage test set is designed for use as a safe and accurate means of
checking the contact pins on the dispensers of the CMDS for the presence of
any stray voltage prior to loading the dispenser magazines containing the
electrical explosive devices in Mirage-2000.
o During flight-line check out, the test set connects directly to the breech plate
output (contact pins) of a dispenser to detect unacceptable levels of stray
voltage.
o The test set provides continuity, detector & Battery Power self-test features to
ensure the test set is operational.
o Operating Power + 3.6 V (Rechargeable Battery).
o Stray Voltage Specifications +120mV dc/ 90mV ac rms.
Page 20 of 38
INFRA RED GENERATOR
o Infra Red Generator (AEM P/No: 56003-01) is ‘Support Test Equipment’ used
for qualitative check of the locking of Homing Head of Magic Missile, when
Missile is mounted on Mirage Aircraft.
o It emits Infra Red in 2-10 micron range to simulate the target for Magic Missile.
o Primary Operating Power: 3.6V (Rechargeable Battery)
o Self Test Feature for Battery Test & Emission Circuit Test included.
Page 21 of 38
ADAPTER TEST SET
o Test Equipment ‘Adapter Set, Test’ contains 4 Nos. of Adapters which are
mounted on Ejector Cartridge Housing on Mirage Aircrafts fitted with Pylons.
o It is mechanical equipment with wiring to interface between pylons & Adapter
Module.
o It is used via Adapter Modules (which are mounted on this adapter), to check
the firing pulses.
Page 22 of 38
INTEGRATED TESTER OF TOMORROW
Salient Features
• Automated Testing
o To optimize on manpower.
o To reduce Training needs.
o To maintain consistent quality of Testing.
• Remote Interfaces
o To interact with Specialists for fault finding.
o For periodic Quality Check by Overseas Expert.
• Mobile Integrated Multi Test Equipment.
o Optimal Utilization of Resources for Operation.
o Reduce Inventory for Maintenance.
o Efficient Operation, Report Generation & Analytics
• Additional I/O & Communication interfaces
o Introduction of Camera Interface for remote debugging.
o Wi-fi, Ethernet, fibre-optic, USB Interfaces for report generation & diagnostics.
o Handheld Device I/F for ease of testing, Report & Diagnostic.
Remote I/F:Optical, Wi-Fi
MOBILE INTEGRATED MULTI TEST EQUIPMENT
WWW
Printer
Computer
SD
SD
ESC
DLT
PROLIANT 8000
SD
Catalyst8500
Power Supply 0CISCO YSTEMSS Power Supply 1
SwitchProcessor
SERIES
SD
Catalyst8500
Power Supply 0CISCO YSTEMSS Power Supply 1
SwitchProcessor
SERIES
SD
Catalyst8500
Power Supply 0CISCO YSTEMSS Power Supply 1
SwitchProcessor
SERIES
SD
4 5 6 7 8 9 10 11
10/100 BASE TX
1 2
3
5411 Enterprise Switch
POWERMGMT
4 5 6 7 8 9 10 11 11
22
33
33
3RR
1000 BASE X
AMBER = GREEN =
FLASHING GREEN =
ACTIVITY LINK OK DISABLED
Test Equipment1: Field I/F
Test Equipment2: Field I/F
Test Equipment3: Field I/F
Field I/FSwitching Unit
Central Test Unit
PowerDistribution Unit
with BackupLaptop computer
Camera
Page 23 of 38
VoIP BASED
VOICE COMMUNICATION
& CONTROL SYSTEM
(VoIP VCCS)
Page 24 of 38
VOIP BASED VOICE COMMUNICATION & CONTROL SYSTEM
VCCS is an associated subsystem of Integrated command and control system
(IACCS) i.e C4I of the IAF.
It aims to provide an integrated Voice Communication facility for conduct &
control of Air Situation.
It allows Air Defense operators to communicate in real time with various
operators in the integrated setup as well as control the Air Situation through
Local & Remote Radio Communication with Aircraft under its area of control.
The system also aims to allow the operators to send and receive short text
messages between ADDC and the external elements in the VCCS networks.
FEATURES
Integrated ground to ground communication facility
Ground-to-air R/T communication through local or remotely positioned R/T sets
Integration of EPABX system at ADDC, and
Intercom for communication amongst operators within the ADDC.
Transfer of text messages.
ADDC
JADC/ DADCs
AIR BASEsMPRs
LLTRs
LOCAL EPABX LOCAL RT
(HPR)
AFMLUs
COMMAND HQ
Page 25 of 38
Page 26 of 38
OTHER PROJECTS / PRODUCTS
DEVELOPED BY US
Page 27 of 38
REMOTE RADAR DATA DISPLAY
The VDU-IMT is an integrated system for use with the FADHS system in the
Air force. The system is required for use at various air bases connected to
the FADHS system. The system is intended to perform two distinct
functions:
Video Display Unit (VDU) function
Intelligent Message Terminal (IMT) function
Page 28 of 38
VDU Functions
This function involves receiving the Radar Track Synthetic Video
information/ data on a modem link from a remote radar site extracting the
Radar Track information, processing it and displaying it on a circular area of
50NM radius on the Raster Scan Colour Display Screen of the computer.
Maximum track capacity is 50 Tracks / scan. The system can be customised
to meet the customer’s specific requirements.
IMT Functions
Providing special Forms for creating, editing various types of error-
free messages
Providing data validation and error-checking while the entries are
being made
Transmitting messages on Tele printer lines at desired time for
delivery into the FADHS system
Receiving, logging, displaying and printing messages
Page 29 of 38
AIR TRAFFIC MANAGEMENT SYSTEM
• Computer based information management and Data Analysis.
• Centralization of all communication facilities viz. RT-VHF/UHF, EPABX onto
a single LipMic Headset.
• On-Line retrieval of various information viz. Metar, Flights Plan and Flight
Progress Data.
• Notams, Flight Plan Checks & Warnings etc. are available on the computer
consoles
• Automatic Logging of crucial data onto the central server.
• Data communication on TP lines supports DMSS interface and automatic
transfer of NOTAMs to ATC from DMSS Network.
• Status of Traffic Barrier, Arrester Barrier etc are available on computer
console.
• Aircraft bearing and homing are also available on computer console.
Page 30 of 38
MIRAGE MILKING UNIT
The system software provide a complete solution for MIRAGE-2000 FDR Milkout
and Analysis System (FMAS) of French Mirage-2000 series of fighter aircrafts.
This equipment is devoted to Indian Air Force for acquiring data from FDR of
Mirage-2000 aircraft and storing it for further analysis. This helps in knowing
different flight parameters to monitor the health of the aircraft in between sorties
at any given point of time and a detailed analysis can be carried out at a later
stage. This Equipment provides flight information during flight, storage of recorded
information in case of a flight accident and enables post flight processing of flight
information on the ground.
This system is primarily using for Data Acquisition, GO/NOGO Analysis (Quick
Analysis), Standard Calibration Analysis and User’s specified specific Analysis like
Flight Profile, Combat Sortie, Statistical Analysis. It also provides Graphical Plot
and Tabular Printout of data.
This equipment provides storage of recorded information and enables post flight processing of flight information on ground in order to be further used for
• Evaluation of piloting techniques • Assessment of Aircraft system operational status. • Study of flight data and equipment parameters for estimation of aircraft
reliability & development of safety methods. • Investigation of flight accidents / incidents
The prototype of the system has already been approved by IAF and 11 for
production version.
Page 31 of 38
FLIGHT DATA ANALYSIS & ACQUISITION SYSTEM
With the disintegration of USSR into a number of region (Russia and Uzbekistan
etc) few years back the supplies of spares and test equipments to the IAF for their
Russian fleet (which is a large portion of their operational fleet) dwindled. It made
IAF to look for Indigenisation of Russian made spares and test equipment. One of
the requirements was to indigenize the milking device for Flight Data Recorder of
Russian series of aircrafts like MIG-21, MIG -27, MIG-29, AN-32 and IL-76
aircrafts. Along with indigenization, many new features like Quick Analysis,
Detailed Analysis of Milked Data and Combat Sortie Simulation were added to
improve upon the existing product.
In 1999-2000 AEM took up the development of FDAAS for MIG-27 and MIG-29
aircrafts. In 2000-2001 it took up the development or FDAAS for AN-32 aircraft.
The present products are outcome of this development. We will now be
customizing it for IL-76 aircraft.
Page 32 of 38
DIGITAL AXLE COUNTER
Indian Railways is presently using analog type axle counter for signaling
applications. With the increase in rail traffic with time, it requires more precision
equipment for signaling purpose to avoid a mishap. With the revolution in
Electronic and Information Technology industry, Micro Controller / Microprocessor
Based Digital Axle Counter become a necessity in present scenario. Therefore,
Indian Railways have decided to change the present Analog Axle Counter with
Digital Axle Counter. These Digital Axle Counter are used as a track section
monitoring system. The unit is used to monitor track sections, platforms, yard
area, point zones, block section between two stations for presence or absence of
trains.
AEM has signed an MOU with Central Electronics Limited (CEL) for development
and supply of Digital Axle Counter and Central Evaluator, all the sensors along the
tracks are provided by CEL. AEM system the signals from CEL sensors, will
interface these signals to AEM Digital Axle Counters for processing.
Digital Axle Counter is trackside equipment, and counts the number of axle passes
through counters. Digital Axle Counter share the information with the next Axle
Counter, as soon as the count matches between two Axle Counters, the
corresponding track section become vacant. AEM has already developed Digital
Axle Counter, and is now under trial run.
Page 33 of 38
SIGNAL CONDITIONING & ANALYSIS SYSTEM
Signal Analysis Module, acquire and process data from analog signals and digital
data bus inputs, and provide ARINC 429 compatible bus output from a fully
programmable unit that is suitable for installation and operation on a commercial
jet aircraft engine.
Page 34 of 38
CIRCULAR WEAVING MACHINE CONTROLLER
Lohia Machinery Manufactures an Indian company manufacturing Textile and
associated machinery having turnover of 200Cr. ($50M). In 2001-2002, Lohia
projected the requirement for Loom Controller for Circular Weaver manufactured
by them.
The Circular Weaver is used for weaving packaging fabric for bags used for packing
cement, fertilizer, agricultural and food products etc. the circular weaver consist of
three motors namely loom motor, Haul-off motor and winder motor.
The loom motor weaver weft into wrap. The haul-off motor decides the take-up
speed of the woven fabric. The haul-off motor must run at a proportional speed of
the loom motor at all times, i.e. during acceleration, de-acceleration and run
phase. The speed of the haul-off motor also decides the weft density. The winder
motor winds the produced fabric.
Page 35 of 38
CONTROLLER FOR DRAW TEXTURISING MACHINES
Lohia Machinery Manufactures an Indian firm having turnover of 2000Cr. ($500M),
in collaboration with Starlinger of France is manufacturing the Draw Texturising
Machine for Textile Industry. In 1998, Lohia projected the need for Indigenisation
and upgradation of the main controller, controlling the heat processes, motor
speed and other critical inputs and outputs of the machine. Accordingly, we took
up the development of System Controller, its associated hardware and complete
software for Draw Texturising Machine. This was completed in mid 1999 and since
then we have supplied approx 20 systems, which are working satisfactorily round
the clock at various installations all over the country. Presently we are also
developing another system controller for their Loom Weaving Machine.
Page 36 of 38
VEHICLE TRACKING UNIT
AEM Vehicle Tracking Unit is a robust mobile GPS based system to provide real
time location information of the vehicle in which this unit is installed. It has a
battery backed-up memory to store four hours to 30 days of data depending on
the frequency of data recording / reporting.
Features:
Full Duplex Communication between vehicle and control station.
Operates with data call & SMS.
Configurable through remote end.
Keyboard interface (4 keys)
Emergency message facility.
Page 37 of 38
AUTOMATED PRODUCTION MONITORING SYSTEM
The Automated Production Monitoring System (APMS) provides for the monitoring
of various assembly lines of a shop floor in an automated manner. The APMS logs
the production of each assembly line on a real time basis. The line down time
alongwith the specific reasons is also logged. Various other parameters as
rejection, rework and manpower etc. are also logged.
The APMS consists of following equipments
Machine Networking Unit
Data Logger
Main Features
Eliminated human error in noting down production data.
On-Line real time production update.
Eliminates physical work of noting data.
Automated counting of items produced
Rejection happening on the line is captured.
Down time event with specific reason is captured.
Data before sending to the ERP is validated.
Provision to capture Man-Power is also provided.
Configuration data as Line name, machine code and item code can be picked
from ERP data-base.
Page 38 of 38
Whenever the line goes down, the operator can punch the specific reason into
the MNU. The MNU is already loaded with the data configuration of each Line
terms of the number of machines, Machine Code, Down Time reasons specific
to each machine etc. Thus the operator has to choose from a number of listed
reasons and the fault is logged automatically.
The MNU is designed around a powerful micro-processor having program
memory and non-volatile data memory.
The MNU has a Graphics LCD of 240 x 128 pixels. A 24-Key Keypad is provided
for user interface.
The MNU operates on 230 VAC. The PWR is fed on the back side using a 3 pin
Terminal block.
The data logger operates on 230 VAC.
The data logger also supports a LAN I / F for connection to ERP networks.