Post on 20-Mar-2016
description
transcript
www.gns-gmbh.com
a new star is born !
Product Catalog GPS / Glonass
10-2013
GNS 802
www.gns-gmbh.com
specific measurable attainable relevant time bound
our Goals!
GPS/GNSS
GPS Module TC6000GN-P1
CC4000
EEPROM
UART
TCXO
BPFGPS
RTC
1.8V
Introduction
TC6000GN-P1 is a high performance fully autonomous GPS module that outputs NMEA on a serial port. The RF input stage includes an LNA and a SAW filter and supports direct connection of a passive antenna. It provides a superior tracking sensitivity of-162dBm and allows positioning solutions even in critical environments like urban canyons or indoor situations. A highly stable TCXO reference oscillatoris integrated into the module. Adding an antenna, a 32,768Hz clock and a single 1.8V power supply will realize an antenna–to-NMEA high performance GPS solution. Its "watchful-eye" feature optimally uses the solution memory for automatic reuse of previously decoded satellite information to deliver ultra-fast Time To First Fix (TTFF) and optimization of the overall system power consumption.The module can be switched between active and deep sleep modes through a single hardware GPIO .
Features • Outstanding acquisition quality • Reduced power consumption• Improved tracking performance • Standard NMEA output• Precision 1PPS output• GPS fix indication output pin• Compact design 9.3x10.0x2.3 mm• Single 1.8 VDC supply• UART interface• RoHS compliant• FCC certified
Applications
• Personal Navigation Devices• Mobile Internet Devices• Smart Phones• Gaming Systems• Asset Tracking• Cameras• Personal Locators• POS Terminals
Characteristics
Parameter Typ Unit
Output data rate 1 1/s
Tracking sensitivity -162 dBm
Acquisition sensitivity -146 dBm
TTFF hotstart 1 s
TTFF coldstart 34 s
Power consumption
GPS active (aquisition) 68 mA
GPS active (tracking) 45 mA
GPS active (tracking) APM active >15 mA
9.3 x 10.0 x 2.3 mm
GPS deep sleep 80 uA
Acquisition/Tracking channels 40/16
GPS
Power supply 1.8 VDC
www.gns-gmbh.comMade in Germany
GNSS ModuleGNS 2301
www.gns-gmbh.com
GNSS
Introduction
Due to its capability to use GPS and GLONASS at the same time, GNS2301 benefits from the higher availability of satellites in critical environments. The navigation performance and accuracy is further improved by using the correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS), QZSS.
GNS2301 offers state of the art performance and flexibility at an extremely attractive price. First Fixes after just a few seconds are achieved with the help of different aided GNSS technologies. The module supports self prediction and predicted A-GNSS.
It has superior dynamic performance at high velocityand provides effective protection against interferencesignals. Up to 8 independent channel interference can be eliminated or reduced.
Features • GLONASS and GPS simultaneously, GALILEO and BEIDOU ready• 52 channels• Ultra high sensitivity: -165dBm• Full sensor support (MEMS) for deep urban canyon positioning • Extremely fast TTFF at low signal level• QZSS, SBAS (WAAS,EGNOS,MSAS,GAGAN) correction support• A-GPS predicted / self predicted support• Active Interference Canceller for GNSS-in-band jammer rejection• Embedded logger function (external SPI flash needed)• Precision 1PPS output • NMEA-0183 or binary protocol• Update rate up to 5 per second • Low Power operating modes• Direct battery operation from a single LiIon cell• User selectable host interface : UART / SPI / I2C• Direct interfacing in 1.8V and 3.3V systems• Hibernate current consumption 50uA typical• SMD type LGA; a stamp hole adaptor is available for manual solder process
Made in Germany
10.0 x 9.3 x 2.1 mm
SiRFStarV
TCXO SAW
GNSS
RTC
VCC
UART
SPI
I2C
SPI Flash
MEMS Sensor
brand new !
Characteristics
Parameter Typ Unit
Output data rate up to 5 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -146 dBm
TTFF hotstart <1 s
TTFF coldstart <35 s
Power consumption
GPS active (aquisition) 39 mA
GPS active (tracking) 38 mA
GPS deep sleep 50 uA
GNSS channels 52
Power supply 2.3 - 4.3 VDC
GPS ModuleGNS 1001
Introduction
At a dimension of 9.0x12.7x2.1 mm the GNS1001 module is a high sensitive, full featured GPS modulewith incredibly low power consumption.
Features • Ultra high sensitivity : -165dBm• Lowest power consumption (15mA typ) • Fast TTFF at low signal levels• Embedded logger function• SBAS (WAAS,EGNOS,MSAS,GAGAN,QZSS) and DGPS(RTCM) correction support• NMEA-0183 or binary protocol• SMD type with stamp holes• CE,FCC and RoHS certified• 66 acquisition- / 22 tracking channels• USB interface support• A-GPS and EASY TM (Self generated orbit prediction) support• High accuaracy 1PPS output• High update rate (up to 10/s) • High performance jammer rejection• AlwaysLocate TM Intelligent Algorithm (Advance Power Periodic Mode) for power saving
GPS
9.0 x 12.7 x 2.1 mm
Characteristics
Parameter Typ Unit
Output data rate up to 10 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -148 dBm
TTFF hotstart <1 s
TTFF coldstart <35 s
Power consumption
GPS active (aquisition) 19 mA
GPS active (tracking) 15 mA
Acquisition/tracking channels 66/22
Accuracy
Position 3m CEP without SA
Velocity 0.1 m/s without SA
PPS deviation 10 ns RMS
MT3339
UART
TCXOLNA + SAW
GPS
RTC
VCC
UART
UART
Power supply 3.3 VDC
Backup current 7 uA
www.gns-gmbh.com
GPS ModuleGNS 1101
Introduction
GNS 1101 is a complete GPS module that features superior sensitivity, low power and small form factor.The GPS signal is applied to the antenna input of themodule and a complete data message with position, velocity and time information is presentedat the serial and USB interface with NMEA protocol or binary protocol. Its -165 dBm tracking sensitivity extends positioning coverage to locations like urban canyons and dense foliage environment where the GPS was not possible before. The small form factor and lowpower consumption make the module easy to integrateinto portable devices like PNDs, mobile phones, cameras and vehicle navigation systems.
Features • Ultra high sensitivity : -165dBm• Low power consumption• Extremely fast TTFF at low signal level• SBAS (WAAS,EGNOS,MSAS,GAGAN) and DGPS(RTCM) correction support• NMEA-0183 or binary protocol• SMD type with stamp holes• Small form factor: 10x13x2.1 mm• CE,FCC and RoHS certified• 66 acquisition- / 22 tracking channels• USB interface support• A-GPS and EPO TM (extended prediction orbit) support • Precision 1PPS output• High update rate (up to 10/s)
GPS
MT3329
UART
TCXOLNA+SAW
GPS
RTC
VCC
10.0 x 13.0 x 2.1 mm
3V LDO
USB
UART
Characteristics
Parameter Typ Unit
Output data rate up to 10 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -148 dBm
TTFF hotstart <1 s
TTFF coldstart <35 s
Power consumption
GPS active (aquisition) 48 mA
GPS active (tracking) 37 mA
Acquisition/tracking channels 66/22
Accuracy
Position 3m CEP without SA
Velocity 0.1 m/s without SA
PPS deviation 100 ns RMS
Power supply 3.3 VDC
Backup current 10 uA
www.gns-gmbh.com
GPS ModuleGNS 1201
Introduction
GNS 1201 is based on the latest MT3339 single chipsolution. This new solution has a low power consumption and supports up to 66 acquisition channels.Tracking sensitivity is better than -165dBm to ensureprecise GPS signal processing under low receptive conditions.The small form factor, the extremely low power consumption, the high update rate of up to 10 messages per second and the integrated logger function makes the GNS1201 an ideal choice for many applications in the professional and the consumer range.
Features • Ultra high sensitivity : -165dBm• Extra-low power consumption • Extremely fast TTFF at low signal level• Embedded logger function• SBAS (WAAS,EGNOS,MSAS,GAGAN,QZSS) and DGPS(RTCM) correction support• NMEA-0183 or binary protocol• SMD type with stamp holes• Small form factor: 11.5x13x2.1 mm• CE,FCC and RoHS certified• 66 acquisition- / 22 tracking channels• A-GPS and EASY TM (Self generated orbit prediction) support• High accuracy 1PPS output• High update rate (up to 10/s) • High performance jammer rejection• AlwaysLocate TM Intelligent Algorithm (Advance Power Periodic Mode) for power saving
GPS
11.5 x 13.0 x 2.1 mm
MT3339
UART
TCXOLNA + SAW
GPS
RTC
VCC
UART
UART
Characteristics
Parameter Typ Unit
Output data rate up to 10 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -148 dBm
TTFF hotstart <1 s
TTFF coldstart <35 s
Power consumption
GPS active (aquisition) 25 mA
GPS active (tracking) 20 mA
Acquisition/tracking channels 66/22
Accuracy
Position 3m CEP without SA
Velocity 0.1 m/s without SA
PPS deviation 10 ns RMS
Power Supply 3.3 VDC
Backup Current 7 uA
www.gns-gmbh.com
GNSS ModuleGNS 1301
GNSS
11.5x13.0 x 2.1 mm
Introduction
The GNS 1301 module utilizes the new generation MediaTek GNSS Chipset that supports GPS, GLONASS and – on request – GALILEO.Due to its capability to use GPS and GLONASS at the same time, GNS 1301 benefits from the higher availability of satellites in critical environments all over the world. The navigation performance and accuracy is further improved by using the correction data from SBAS. First Fixes after just a few seconds are achieved with the help of A-GPS and the EASY TM “self generated orbit prediction” algorithm. The excellent low power design makes it easy to implement this module in power sensitive, battery supplied applications.
Features • GLONASS and GPS simultanously • Ultra high sensitivity : -165dBm• Low power consumption • Extremely fast TTFF at low signal level• Embedded logger function• SBAS (WAAS,EGNOS,MSAS,GAGAN,QZSS) and DGPS (RTCM) correction support• NMEA-0183 or binary protocol• SMD type with stamp holes• Small form factor: 11.5x13x2.1 mm• CE,FCC and RoHS certified• 99 acquisition- / 33 tracking channels• A-GPS and EASY TM (Self generated orbit prediction) support• High accuracy 1PPS output• High update rate (up to 10/s) • internal power management saves extra LDO• High performance jammer rejection• AlwaysLocate TM Intelligent Algorithm (Advance Power Periodic Mode) for power saving
MT3333
UART
TCXOLNA + SAW
GNSS
RTC
VCC
UART
UART
Characteristics
Parameter Typ Unit
Output data rate up to 10 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -148 dBm
TTFF hotstart <1 s
TTFF coldstart <31 s
Power consumption
GNSS active (aquisition) 35 mA
GNSS active (tracking) 29 mA
Acquisition/tracking channels 99/33
Accuracy
Position 3m CEP without SA
Velocity 0.1 m/s without SA
PPS deviation 10 ns RMS
Power Supply 3.3 VDC
www.gns-gmbh.com
GPS/TimeGPS Module precision timing
www.gns-gmbh.com
9.3 x 10.0 x 2.3 mm
Introduction
The TC6000GTIM GPS timing module incorperates acomplete GPS receiver (RF, Baseband plus GPS processing) with superior performance of -162dBm navigation sensitivity. It supports high precision GPS time pulse functionality (PPS) even if only one single satellite is in view. The “time stamp” function provides an internal high precision time measurement that is triggered by a hardwareinput. After a pulse appears on this input, the UTC absolute time point of the pulse event becomes available as a numerical value on the data port. This function is useful to attach timestamps to events (e.g. physical measurements) with nano-second resolution.
Features • One satellite PPS pulse generation for synchronization purposes• “Time stamp” feature with nanosecond resolution• GPS tracking & navigation sensitivity -162dBm• Host computer driver and implementation support from GNS• Suitable for many Operation Systems• GPS SAW filter and TCXO included• Only one single power supply (1.8V) needed• Miniature 36 pin module 9.3x10.3x2.3 mm LGA• UART interface• Assisted GPS (A-GPS) support
Applications
• Precision Timing• Femtocells • Exploration equipment• Data loggers• Distributed data acquisition systems• Mobile communication equipment
TCXO
BPFGPS
RTC
1.8V
NL5500L
UART
GPS Module precision timing TC6000GTIM
GPSsubsystem
Characteristics
Parameter Typ Unit
Output data rate 1 1/s
Tracking sensitivity -162 dBm
Acquisition sensitivity -146 dBm
TTFF hotstart <1 s
TTFF coldstart 34 s
Power consumption
GPS active (aquisition) 63 mA
GPS active (tracking) 40 mA
Acquisition/tracking channels 40/16
Accuracy
Time stamp precision 45 ns typ.
PPS jitter 12 ns typ.
Power Supply 1.8 VDC
www.gns-gmbh.com
GPS/Time
time stamp
PPS
Made in Germany
GPS precision timing StarterKitTC6000GTIM StarterKit
Introduction
TC6000GTIM StarterKit and the TC6000GTIM test software have been developed to evaluate the module before design–in. The Starter Kit and Software can be easily run on a PC and the “time stamp” function can be tested by triggering events by pressing a key (or pulling an input pin) on the StarterKit PCB.
Features • USB connection • Power supply through USB• SMA antenna connector for GPS• DC supply on RF input for connecting active antennas• Miniature key button and pin header for time stamp event input
StarterKit contents
• GNS TC6000GTIM EVB• USB-A to mini USB cable• Active GPS antenna • CD with documentation & software
Accessory
GPS antenna evaluation Kit is a practical GPS antenna evaluation board to estimate GPS signal levels atthe application environments, where a chip antenna will be applied. Furthermore it implements a SPDT RF switch IC, which switches between the on-board chip antenna and a second active or passive GPS antenna.
Contents
• GPS antenna evaluation board• SMA adapter (male-male)
TC6000GTIM software
TC6000G Starter Kit
TC6000 Starter Kit
Antenna evaluation Kit
GPS/Time
TC6000 GTIM Starter Kit
www.gns-gmbh.comMade in Germany
NOTES
www.gns-gmbh.com
GPS/ GNSSGPS antenna module
www.gns-gmbh.com
GPS antenna moduleGNS 401
Introduction
GNS 401 is one of the smallest GPS antenna modulebased on the MT3329 single chip solutions,available with a finely tuned, high-sensitivity patch ceramic antenna.It has a very compact and easy to integrate designwith the ultimate tracking performance.
Features • MediaTek MT3329 chipset• Smart antenna: finely tuned ceramic antenna• High sensitivity, -165 dBm • Position accuracy, <3.0m • GPS fix indication output pin• Compact design 16.0x16.0x6.0 mm• SBAS (WAAS/EGNOS/MSAS/GAGAN) support• A-GPS and EPO (extended prediction orbit) support• 66 acquisition channels• Multi-path compensation • Improved jammer reduction • UART (TTL) and USB interface support• NMEA 0183 or binary protocol support• FCC, E911, RoHS compliance• SMD type with stamp holes
Characteristics
Parameter Typ Unit
Output data rate up to 10 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -148 dBm
TTFF hotstart < 1 s
TTFF coldstart < 35 s
Power consumption
GPS active (aquisition) 48 mA
GPS active (tracking) 37 mA
Power Supply 3.3V - 5.5V
Acq/tracking channels 66/22
16.0 x 16.0 x 6.0 mm
GPS
backup current 10 uA
www.gns-gmbh.com
GPS antenna moduleGNS 501
Introduction
The GNS 501 is an awesome little module for navigation, package tracking and any other applicationwhere simple, reliable positioning data is a necessity. To get it up and running, all you have to do is hook upa 1.8V power supply and a serial data line.
Features
• Improved acquisition performance• Improved tracking&navigation performance and minimized error in multi-path environments• Standard NMEA 0183 output• Precision 1PPS output • GPS Fix indication output pin• Push to Fix pin (PTF) for power management• Automatic Power Management (APM) feature• Compact design 17.0x18.0x7.8 mm• Single 1.8 VDC supply • UART interface• RoHS compliant• Fast time to market
Characteristics
Parameter Typ Unit
Output rate 1 1/s
Tracking sensitivity -161 dBm
Acquisition sensitivity -145 dBm
TTFF hotstart <1 s
TTFF coldstart 34 s
Power consumption
Power supply 1.8 VDC
GPS active (tracking) 50 mA
GPS active (aquisition) 73 mA
Acq./tracking channels 40/16
17.0 x 18.0 x 7.8 mm
GPS
www.gns-gmbh.com
Backup current 80 uA
Made in Germany
GPS antenna moduleGNS 601
Introduction
Based on the MT3339 single chip solution the GNS 601 provides an easy to build-in SMD solderable complete GPS receiver solution. It has got an excellent low power consumption and supports up to 66 acquisition and 22 tracking channels, providing navigation sensitivity up to -165dBm.
Features • Ultra high sensitivity: -165dBm• Extra-low power consumption • Extremely fast TTFF at low signal level• Embedded logger function• SBAS(WAAS,EGNOS,MSAS,GAGAN,QZSS) support• NMEA-0183 or binary protocol• SMD type with stamp holes• 66 acquisition- / 22 tracking channels• A-GPS and EASY™ (Self generated orbit prediction) support • Precision PPS output• High update rate (up to 10/s) • 12 Multi-tone Active Interference Canceller for GPS in-band jammer reduction• AlwaysLocate™ Intelligent Algorithm (Advance Power Periodic Mode for power saving)• Small form factor: 16x16x6.0 mm• CE, FCC and RoHS certified
Characteristics
Parameter Typ Unit
Output rate 1 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -148 dBm
TTFF hotstart <1 s
TTFF coldstart 31 s
Power consumption
Power supply 3.2 - 4.0 VDC
GPS active (tracking) 20 mA
GPS active (aquisition) 25 mA
Acq./tracking channels 66/22
GPS
16.0 x 16.0 x 6.0 mm
Backup current 7 uA
www.gns-gmbh.com
GPS antenna moduleGNS 602
Introduction
Based on the MT3339 single chip solution the GNS 602 provides an easy to build-in SMD solderable complete GPS receiver solution. It has got an excellent low power consumption and supports up to 66 acquisition and 22 tracking channels, providing navigation sensitivity up to -165dBm. Integrated small GPS Chip Antenna.
Features • Ultra high sensitivity: -165dBm• Extra-low power consumption • Extremely fast TTFF at low signal level• Embedded logger function• SBAS(WAAS,EGNOS,MSAS,GAGAN,QZSS) support• NMEA-0183 or binary protocol• SMD type with stamp holes• 66 acquisition- / 22 tracking channels• A-GPS and EASY™ (Self generated orbit prediction) support • High accuracy PPS output• High update rate (up to 10/s) • 12 Multi-tone Active Interference Canceller for GPS in-band jammer reduction• AlwaysLocate™ Intelligent Algorithm (Advance Power Periodic Mode for power saving)• Small form factor: 16x16x2.1 mm• CE, FCC and RoHS certified
Characteristics
Parameter Typ Unit
Output rate 1 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -148 dBm
TTFF hotstart <1 s
TTFF coldstart 31 s
Power consumption
Power supply 3.2 - 4.0 VDC
GPS active (tracking) 20 mA
GPS active (aquisition) 25 mA
Acq./tracking channels 66/22
GPS
16.0 x 16.0 x 2.1 mm
Backup current 7 uA
www.gns-gmbh.com
GPS antenna moduleGNS 603
IntroductionGNS603 is a small autonomous GPS receiver, based upon the MT3339 single chip, available with a finely tuned, high-sensitivity patch ceramic antenna.The navigation performance and accuracy is further improved by using correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS, QZSS) or DGPS(RTCM).
The GNS603 provides a extra embedded functionality for connection of an external active GPS antenna. An automatic antenna switching function and a short circuit protection features a software antenna status message called “Antenna Advisor”. The “Antenna Advisor” helps to indicate the different states, includingactive antenna connection, antenna open circuit detection and antenna shortage.
Features • External antenna input• 66 acquisition-/ 22 tracking channels• Ultra high sensitivity: -165dBm• Smart antenna: finely tuned ceramic patch antenna• Automatic external/internal antenna switching function• “Antenna Advisor” function• SBAS (WAAS,EGNOS,MSAS,GAGAN, QZSS) or DGPS (RTCM) correction support• A-GPS by EPO “Extended Prediction Orbit” ™ enables 7/14days prediction• 12 Multitone Active Interference Canceller (MTAIC) for GPS-in-band jammer rejection• EASY ™ : Self generated orbit prediction support• AlwaysLocate ™ : Intelligent power saving Algorithm• High accuracy 1PPS output• NMEA-0183 or binary protocol• High update rate (up to 10/s)• Embedded logger function with 16hrs internal memory• GPS current consumption (@3.3V): Acquisition: 25mA Typical Tracking: 20mA Typical• Low backup current consumption 7uA, typical• SMD type with stamp holes• Small form factor: 16x16x5.2mm• CE, FCC and RohS certified
Characteristics
Parameter Typ Unit
Output rate 1 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -148 dBm
TTFF hotstart 1 s
TTFF coldstart 35 s
Power consumption
Power supply 3.0 - 4.3 VDC
GPS active (tracking) 20 mA
GPS active (aquisition) 25 mA
Acq./tracking channels 66/22
GPS
16.0 x 16.0 x 5.2 mm
Backup current 7 uA
www.gns-gmbh.com
GPS antenna moduleGNS 701
Introduction
GNS701 is a small autonomous GPS/GLONASS receiver,based upon the MediaTek MT3333 single chip, available with a finely tuned, high-sensitivity patch ceramic antenna. The receiver supports GPS and GLONASS simultaneously. The navigation performance and accuracy is further improved by using correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS), QZSS or DGPS(RTCM).
Features • GLONASS and GPS simultaneously• 99 acquisition-/ 33 tracking channels• Ultra high sensitivity: -165dBm• Smart antenna: finely tuned 18x18x4mm ceramic antenna• SBAS (WAAS,EGNOS,MSAS,GAGAN, QZSS) correction support• A-GPS by EPO “Extended Prediction Orbit” ™ enables 7/14days prediction• 12 Multitone Active Interference Canceller (MTAIC) for GPS-in-band jammer rejection• EASY ™ : Self generated orbit prediction support• AlwaysLocate ™ : Intelligent Algorithm for power saving• High accuracy 1PPS output• NMEA-0183 or binary protocol• High update rate (up to 10/s)• Embedded logger function with 16hrs internal memory• GPS current consumption (@3.3V): Acquisition: 35mA Typical Tracking: 29mA Typical• Low backup current consumption 15uA, typical• SMD type with stamp holes• Small form factor: 19.5x19.5x7.2 mm• CE, FCC and RohS certified
Characteristics
Parameter Typ Unit
Output rate up to 10 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -148 dBm
TTFF hotstart <1 s
TTFF coldstart 35 s
Power consumption
Power supply 3.0 - 4.3 VDC
GPS active (tracking) 29 mA
GPS active (aquisition) 35 mA
Acq./tracking channels 99/33
19,5 x 19,5 x 7,2 mm
Backup current 15 uA
www.gns-gmbh.com
GNSS
Characteristics
Parameter Typ Unit
Output rate up to 10 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -148 dBm
TTFF hotstart <1 s
TTFF coldstart 35 s
Power consumption
Power supply 3.3 VDC
GPS active (tracking) 29 mA
GPS active (aquisition) 35 mA
Acq./tracking channels 99/33
Backup current 15 uA
GPS ReceiverGNS 702
www.gns-gmbh.com
16.0 x 16.0 x 2.1 mm
GPS + Glonass
Introduction
GNS702 is a small autonomous GPS/GLONASS/Beidoureceiver, based upon the MediaTek MT3333 single chip, available with a finely tuned, high-sensitivity chip ceramic antenna. The receiver supports GPS and GLONASS simultaneously. The navigation performance and accuracy is further improved by using correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS, QZSS).
Features • GLONASS and GPS simultaneously• BEIDOU in preparation• 99 acquisition-/ 33 tracking channels• Ultra high sensitivity: -165dBm• Chip ceramic antenna• SBAS (WAAS,EGNOS,MSAS,GAGAN, QZSS) correction support• A-GPS by EPO “Extended Prediction Orbit” ™
enables 7/14days prediction• 12 Multitone Active Interference Canceller (MTAIC) for GPS-in-band jammer rejection• EASY ™ : Self generated orbit prediction support• AlwaysLocate ™ : Intelligent Algorithm for power saving• High accuracy 1PPS output• NMEA-0183 or binary protocol• High update rate (up to 10/s)• Embedded logger function with 16hrs internal memory• GPS current consumption (@3.3V): Acquisition: 35mA Typical Tracking: 29mA Typical• Low backup current consumption 15uA, typical• SMD type with stamp holes• Small form factor: 16.0x16.0x2.1 mm• CE, FCC and RohS certified
Characteristics
Parameter Typ Unit
Output rate up to 10 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -148 dBm
TTFF hotstart <1 s
TTFF coldstart 35 s
Power consumption
Power supply 3.0 - 4.3 VDC
GPS active (tracking) 29 mA
GPS active (aquisition) 35 mA
Acq./tracking channels 99/33
Backup current 15 uA
GNSS antenna moduleGNS 702
www.gns-gmbh.com
16.0 x 16.0 x 2.1 mm
GNSS
Introduction
GNS702 is a small autonomous GPS/GLONASS/Beidoureceiver, based upon the MediaTek MT3333 single chip, available with a finely tuned, high-sensitivity chip ceramic antenna. The receiver supports GPS and GLONASS simultaneously. The navigation performance and accuracy is further improved by using correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS, QZSS).
Features • GLONASS and GPS simultaneously• BEIDOU in preparation• 99 acquisition-/ 33 tracking channels• Ultra high sensitivity: -165dBm• Chip ceramic antenna• SBAS (WAAS,EGNOS,MSAS,GAGAN, QZSS) correction support• A-GPS by EPO “Extended Prediction Orbit” ™
enables 7/14days prediction• 12 Multitone Active Interference Canceller (MTAIC) for GPS-in-band jammer rejection• EASY ™ : Self generated orbit prediction support• AlwaysLocate ™ : Intelligent Algorithm for power saving• High accuracy 1PPS output• NMEA-0183 or binary protocol• High update rate (up to 10/s)• Embedded logger function with 16hrs internal memory• GPS current consumption (@3.3V): Acquisition: 35mA Typical Tracking: 29mA Typical• Low backup current consumption 15uA, typical• SMD type with stamp holes• Small form factor: 16.0x16.0x2.1 mm• CE, FCC and RohS certified
Characteristics
Parameter Typ Unit
Output rate up to 10 1/s
Tracking sensitivity -165 dBm
Acquisition sensitivity -148 dBm
TTFF hotstart <1 s
TTFF coldstart 35 s
Power consumption
Power supply 3.3 VDC
GPS active (tracking) 29 mA
GPS active (aquisition) 35 mA
Acq./tracking channels 99/33
Backup current 15 uA
GPS ReceiverGNS 702
www.gns-gmbh.com
16.0 x 16.0 x 2.1 mm
GPS + Glonass
Introduction
GNS702 is a small autonomous GPS/GLONASS/Beidoureceiver, based upon the MediaTek MT3333 single chip, available with a finely tuned, high-sensitivity chip ceramic antenna. The receiver supports GPS and GLONASS simultaneously. The navigation performance and accuracy is further improved by using correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS, QZSS).
Features • GLONASS and GPS simultaneously• BEIDOU in preparation• 99 acquisition-/ 33 tracking channels• Ultra high sensitivity: -165dBm• Chip ceramic antenna• SBAS (WAAS,EGNOS,MSAS,GAGAN, QZSS) correction support• A-GPS by EPO “Extended Prediction Orbit” ™
enables 7/14days prediction• 12 Multitone Active Interference Canceller (MTAIC) for GPS-in-band jammer rejection• EASY ™ : Self generated orbit prediction support• AlwaysLocate ™ : Intelligent Algorithm for power saving• High accuracy 1PPS output• NMEA-0183 or binary protocol• High update rate (up to 10/s)• Embedded logger function with 16hrs internal memory• GPS current consumption (@3.3V): Acquisition: 35mA Typical Tracking: 29mA Typical• Low backup current consumption 15uA, typical• SMD type with stamp holes• Small form factor: 16.0x16.0x2.1 mm• CE, FCC and RohS certified
Parameter Typ Unit
Output rate 1 or 5 1/s
Tracking sensitivity -165* dBm
Acquisition sensitivity -146* dBm
TTFF hotstart 1 s
TTFF coldstart <35 s
Power consumption
Power supply 2.3 - 4.3 VDC
Power consumption 95 mW
Acq./tracking channels 52
PPS jitter 25 ns RMS
GNSS antenna moduleGNS 802
10.0 x 16.0 x 2.1 mm
GNSS
Introduction
GNS802 is a complete GNSS receiver based on SiRF StarV that includes a well matched tiny chip antenna to provide the best performance on a 10x16 mm outline. Due to its capability to use GPS and GLONASS at the same time, GNS802 benefits from the higher availability of satellites in critical environments. The navigation performance and accuracy is further improved by using the correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS), QZSS.
Features • GLONASS and GPS simultaneously, • GALILEO, BEIDOU ready• 52 channels• Ultra high sensitivity: -165dBm• Chip ceramic antenna• Extremely fast TTFF at low signal level• SBAS (WAAS,EGNOS,MSAS,GAGAN, QZSS) correction support• A-GPS predicted / self predicted support
• Active Interference Canceller for GPS-in-band jammer rejection• Embedded logger function (external SPI flash needed)• High accuracy 1PPS output• NMEA-0183 or binary protocol• High update rate (up to 5/s)• Low Power operating modes• Direct battery operation from a single LiIon cell• User selectable host interface : UART / SPI / I2C• Direct interfacing in 1.8V and 3.3V systems• ibernate current consumption 50uA typical• SMD type LGA; a stamp hole adaptor is available for manual solder process• Small form factor: 10.0x16.0x2.1 mm
Interface Voltage 1.8 - 4.3 VDC
Accuracy 2.5 m
www.gns-gmbh.comMade in Germany
Characteristics
www.gns-gmbh.com
GPS evaluation moduleTC6000GN-EM1-S
IntroductionThe TC6000GN-EM1-S board is equipped with direct plug-in connectors for the MSP-EXP430F5438, MSP-EXP430F5529 board or Stellaris LM3S9B96 Cortex M3 EVB. An on board 32.768kHz oscillator for the GPS RTC and internal level shifters to adapt to the MSP-EXP430 and Stellaris boards’ signal levelsof 3.3V are also included. The external SMA GPS antenna connector provides 3.3V DC to supply an active GPS antenna for system- and performance tests.
Features • Tiny plug-in board that directly matches to the MSP-EXP430F5529, MSP- EXP430F5438 or Stellaris LM3S9B96 Cortex M3 EVB RF1 and RF2 connectors• External SMA antenna connector on board • GPS active antenna 3.3V DC supply• GPS-fix LED indicator• Test firmware (source provided) for demonstration & FW development• Test firmware outputs GPS status and Position solution on LC Display
StarterKit contents
• GNS TC6000GN-EM1-S plug-in board• Active GPS antenna• CD with documentation
Accessory
GPS antenna evaluation Kit is a practical GPS antenna evaluation board to estimate GPS signal levels atthe application environments, where a chip antenna will be applied. Furthermore it implements a SPDT RF switch IC, which switches between the on-board chip antenna and a second active or passive GPS antenna.
Contents
• GPS antenna evaluation board• SMA adapter (male-male)
GPS antenna evaluation Kit
TC6000GN-EM1-S
TC6000GN-EM1-S + MSP430 F5529
TC6000GN-EM1-S + MSP430F5438
www.gns-gmbh.comMade in Germany
GN
S 1301
GPS StarterKits
Introduction
Our StarterKits are developed to support designers during evaluation anddesign-in of GNS-GmbH GPS stand alone solutions. Reference layouts are available on the GNS web page www.forum.gns-gmbh.com
Features • On board USB2UART bridge for PC connection• Power supply over USB • SMA connector for GPS antenna input• DC output (3.0V) to supply active antenna• LED „fix indicator“
StarterKit contents
• GNS GPS module• USB-A to mini USB cable• Active GPS antenna• CD with documentation & software
Accessory
GPS antenna evaluation Kit is a practical GPS antenna evaluation board to estimate GPS signal levels atthe application environments, where a chip antenna will be applied. Furthermore it implements a SPDT RF switch IC, which switches between the on-board chip antenna and a second active or passive GPS antenna.
Contents
• GPS antenna evaluation board• SMA adapter (male-male)
We can provide starterkits for all our GPS modules.Do not hesitate to ask our distribution partner or contact us directly.
Starter Kit
GPS antenna evaluation Kit
Starter Kit
www.gns-gmbh.comMade in Germany
ww
w.gns-gm
bh.com
GP
S +
GLO
NA
SS
mo
du
les a
nd
an
ten
na m
od
ule
s
M
odel Chipset
Size (mm
) Sensitivity Power Interface
Features
Aquisition (dBm)
Tracking (dBm)
Aquisition (mW)
Tracking (mW)
NMEA output UART
TC6000GN
-P1CC4000
9.3x10.0x2.3-146
-162122
81
GN
S 1001M
T33399.0x12.7x2.1
6350
10.0x13.0x2.1150
122
8266
11696
GN
S 1101
GN
S 1201
GN
S 1301
MT3329
MT3339
MT3333
11.5x13.0x2.1
11.5x13.0x2.1
1.8 -3.3V
Aquisition channels
1 PPS (ns RMS)
USB
GLONASS
4066666699
••
•
10
100
1010•
-148-165
-148-165
-148-165
-148-165
Deep sleep
•
Watchful eye
•TC6000G
TIM
NL5500L
9.3x10.0x2.3-146
-162113
7240
•12
GPS
•••
• ••
SBAS
Time stamp
QZSS
•
1SV PPS feature
•
2552
GN
S 23019.3x10.0x2.1
••
-148-165
••
SiRFstarVSPI / I 2C
•
Others
6968
••
Galileo
Beidou
11696
GN
S 1301-B*M
T333311.5x13.0x2.1
99•
10-148
-165•
••
• •
•••••
••
GPS Patch antenna
GPS Chip antenna
GN
S 401
GN
S 601
GN
S 602
GN
S 603
GN
S 701
GN
S 702
GN
S 501
MT3329
150122
USB
66•
-----148
-165•
••
16.0x16.0x6.0•
MT3339
8366
•10
-148-165
••
•16.0x16.0x6.0
•M
T333983
6766
•10
-148-165
••
•16.0x16.0x6.0
•M
T333983
6766
•10
-148-165
••
•16.0x16.0x5.2
•116
96M
T333319,.5x19.5x7.2
99•
10-148
-165•
••
••
11696
MT3333
16.0x16.0x2.199
•10
-148-165
••
••
••
•
CC400017.0x18.0x7.8
-145-161
13090
PPS output
••••• •••••••••
1.8V
------
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
DGPS/RTCM input
3.3V
3.3V
DOC: GPS Spreadsheet_11092013
• H
ost needed
1.8V
67
1.8 -3.3V25
52G
NS 802
9.3x10.0x2.1•
•-146
-165•
•SiRFstarV
SPI / I 2C•
6995
••
15 15
•
• •
••
••
----
www.gns-gmbh.com
Tailormade
GPS unique solutions tailored to
your needs !
Questions ?
send email to tailor@gns-gmbh.com
___
Contact us
EMEA GNS - GmbH +49 2405 4148 0 info@gns-gmbh.com Adenauerstr. 18 52146 Würselen Germany
ASIA GNS ASIA Ltd. +852 2537 2889 info@gns-asia.hk Room 303, 3/F, St. George´s Building 2 Ice House Street, Central Hong Kong
www.gns-gmbh.com
GNS-GmbH reserves all rights to this document and the information contained herein. Products, names and logos described herein may in whole or in part be subject to intellectual property rights. The information contained herein is provided “as is”. No warranty of any kind is made in relation to the content of this document. This document may be revised by GNS-GmbH at any time. Copyright © 2013, GNS-GmbH, Adenauerstr. 18, 52146 Würselen, Germany
1109
2013
_GPS
Distribution
Japan KAGA Electronics Ltd.