GNS Newsletter 10/2013

www.gns-gmbh.com

a new star is born !

Product Catalog GPS / Glonass

10-2013

GNS 802

www.gns-gmbh.com

specific measurable attainable relevant time bound

our Goals!

GPS/GNSS

GPS Module TC6000GN-P1

CC4000

EEPROM

UART

TCXO

BPFGPS

RTC

1.8V

Introduction

TC6000GN-P1 is a high performance fully autonomous GPS module that outputs NMEA on a serial port. The RF input stage includes an LNA and a SAW filter and supports direct connection of a passive antenna. It provides a superior tracking sensitivity of-162dBm and allows positioning solutions even in critical environments like urban canyons or indoor situations. A highly stable TCXO reference oscillatoris integrated into the module. Adding an antenna, a 32,768Hz clock and a single 1.8V power supply will realize an antenna–to-NMEA high performance GPS solution. Its "watchful-eye" feature optimally uses the solution memory for automatic reuse of previously decoded satellite information to deliver ultra-fast Time To First Fix (TTFF) and optimization of the overall system power consumption.The module can be switched between active and deep sleep modes through a single hardware GPIO .

Features • Outstanding acquisition quality • Reduced power consumption• Improved tracking performance • Standard NMEA output• Precision 1PPS output• GPS fix indication output pin• Compact design 9.3x10.0x2.3 mm• Single 1.8 VDC supply• UART interface• RoHS compliant• FCC certified

Applications

• Personal Navigation Devices• Mobile Internet Devices• Smart Phones• Gaming Systems• Asset Tracking• Cameras• Personal Locators• POS Terminals

Characteristics

Parameter Typ Unit

Output data rate 1 1/s

Tracking sensitivity -162 dBm

Acquisition sensitivity -146 dBm

TTFF hotstart 1 s

TTFF coldstart 34 s

Power consumption

GPS active (aquisition) 68 mA

GPS active (tracking) 45 mA

GPS active (tracking) APM active >15 mA

9.3 x 10.0 x 2.3 mm

GPS deep sleep 80 uA

Acquisition/Tracking channels 40/16

GPS

Power supply 1.8 VDC

www.gns-gmbh.comMade in Germany

GNSS ModuleGNS 2301

www.gns-gmbh.com

GNSS

Introduction

Due to its capability to use GPS and GLONASS at the same time, GNS2301 benefits from the higher availability of satellites in critical environments. The navigation performance and accuracy is further improved by using the correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS), QZSS.

GNS2301 offers state of the art performance and flexibility at an extremely attractive price. First Fixes after just a few seconds are achieved with the help of different aided GNSS technologies. The module supports self prediction and predicted A-GNSS.

It has superior dynamic performance at high velocityand provides effective protection against interferencesignals. Up to 8 independent channel interference can be eliminated or reduced.

Features • GLONASS and GPS simultaneously, GALILEO and BEIDOU ready• 52 channels• Ultra high sensitivity: -165dBm• Full sensor support (MEMS) for deep urban canyon positioning • Extremely fast TTFF at low signal level• QZSS, SBAS (WAAS,EGNOS,MSAS,GAGAN) correction support• A-GPS predicted / self predicted support• Active Interference Canceller for GNSS-in-band jammer rejection• Embedded logger function (external SPI flash needed)• Precision 1PPS output • NMEA-0183 or binary protocol• Update rate up to 5 per second • Low Power operating modes• Direct battery operation from a single LiIon cell• User selectable host interface : UART / SPI / I2C• Direct interfacing in 1.8V and 3.3V systems• Hibernate current consumption 50uA typical• SMD type LGA; a stamp hole adaptor is available for manual solder process

Made in Germany

10.0 x 9.3 x 2.1 mm

SiRFStarV

TCXO SAW

GNSS

RTC

VCC

UART

SPI

I2C

SPI Flash

MEMS Sensor

brand new !

Characteristics

Parameter Typ Unit

Output data rate up to 5 1/s



TTFF hotstart <1 s

TTFF coldstart <35 s

Power consumption



GPS deep sleep 50 uA

GNSS channels 52

Power supply 2.3 - 4.3 VDC

GPS ModuleGNS 1001

Introduction

At a dimension of 9.0x12.7x2.1 mm the GNS1001 module is a high sensitive, full featured GPS modulewith incredibly low power consumption.

Features • Ultra high sensitivity : -165dBm• Lowest power consumption (15mA typ) • Fast TTFF at low signal levels• Embedded logger function• SBAS (WAAS,EGNOS,MSAS,GAGAN,QZSS) and DGPS(RTCM) correction support• NMEA-0183 or binary protocol• SMD type with stamp holes• CE,FCC and RoHS certified• 66 acquisition- / 22 tracking channels• USB interface support• A-GPS and EASY TM (Self generated orbit prediction) support• High accuaracy 1PPS output• High update rate (up to 10/s) • High performance jammer rejection• AlwaysLocate TM Intelligent Algorithm (Advance Power Periodic Mode) for power saving

GPS

9.0 x 12.7 x 2.1 mm

Characteristics

Parameter Typ Unit




TTFF hotstart <1 s


Power consumption



Acquisition/tracking channels 66/22

Accuracy

Position 3m CEP without SA

Velocity 0.1 m/s without SA

PPS deviation 10 ns RMS

MT3339

UART

TCXOLNA + SAW

GPS

RTC

VCC

UART

UART


Backup current 7 uA

www.gns-gmbh.com

GPS ModuleGNS 1101

Introduction

GNS 1101 is a complete GPS module that features superior sensitivity, low power and small form factor.The GPS signal is applied to the antenna input of themodule and a complete data message with position, velocity and time information is presentedat the serial and USB interface with NMEA protocol or binary protocol. Its -165 dBm tracking sensitivity extends positioning coverage to locations like urban canyons and dense foliage environment where the GPS was not possible before. The small form factor and lowpower consumption make the module easy to integrateinto portable devices like PNDs, mobile phones, cameras and vehicle navigation systems.

Features • Ultra high sensitivity : -165dBm• Low power consumption• Extremely fast TTFF at low signal level• SBAS (WAAS,EGNOS,MSAS,GAGAN) and DGPS(RTCM) correction support• NMEA-0183 or binary protocol• SMD type with stamp holes• Small form factor: 10x13x2.1 mm• CE,FCC and RoHS certified• 66 acquisition- / 22 tracking channels• USB interface support• A-GPS and EPO TM (extended prediction orbit) support • Precision 1PPS output• High update rate (up to 10/s)

GPS

MT3329

UART

TCXOLNA+SAW

GPS

RTC

VCC

10.0 x 13.0 x 2.1 mm

3V LDO

USB

UART

Characteristics

Parameter Typ Unit




TTFF hotstart <1 s


Power consumption




Accuracy





Backup current 10 uA

www.gns-gmbh.com

GPS ModuleGNS 1201

Introduction

GNS 1201 is based on the latest MT3339 single chipsolution. This new solution has a low power consumption and supports up to 66 acquisition channels.Tracking sensitivity is better than -165dBm to ensureprecise GPS signal processing under low receptive conditions.The small form factor, the extremely low power consumption, the high update rate of up to 10 messages per second and the integrated logger function makes the GNS1201 an ideal choice for many applications in the professional and the consumer range.

Features • Ultra high sensitivity : -165dBm• Extra-low power consumption • Extremely fast TTFF at low signal level• Embedded logger function• SBAS (WAAS,EGNOS,MSAS,GAGAN,QZSS) and DGPS(RTCM) correction support• NMEA-0183 or binary protocol• SMD type with stamp holes• Small form factor: 11.5x13x2.1 mm• CE,FCC and RoHS certified• 66 acquisition- / 22 tracking channels• A-GPS and EASY TM (Self generated orbit prediction) support• High accuracy 1PPS output• High update rate (up to 10/s) • High performance jammer rejection• AlwaysLocate TM Intelligent Algorithm (Advance Power Periodic Mode) for power saving

GPS

11.5 x 13.0 x 2.1 mm

MT3339

UART

TCXOLNA + SAW

GPS

RTC

VCC

UART

UART

Characteristics

Parameter Typ Unit




TTFF hotstart <1 s


Power consumption




Accuracy




Power Supply 3.3 VDC

Backup Current 7 uA

www.gns-gmbh.com

GNSS ModuleGNS 1301

GNSS

11.5x13.0 x 2.1 mm

Introduction

The GNS 1301 module utilizes the new generation MediaTek GNSS Chipset that supports GPS, GLONASS and – on request – GALILEO.Due to its capability to use GPS and GLONASS at the same time, GNS 1301 benefits from the higher availability of satellites in critical environments all over the world. The navigation performance and accuracy is further improved by using the correction data from SBAS. First Fixes after just a few seconds are achieved with the help of A-GPS and the EASY TM “self generated orbit prediction” algorithm. The excellent low power design makes it easy to implement this module in power sensitive, battery supplied applications.

Features • GLONASS and GPS simultanously • Ultra high sensitivity : -165dBm• Low power consumption • Extremely fast TTFF at low signal level• Embedded logger function• SBAS (WAAS,EGNOS,MSAS,GAGAN,QZSS) and DGPS (RTCM) correction support• NMEA-0183 or binary protocol• SMD type with stamp holes• Small form factor: 11.5x13x2.1 mm• CE,FCC and RoHS certified• 99 acquisition- / 33 tracking channels• A-GPS and EASY TM (Self generated orbit prediction) support• High accuracy 1PPS output• High update rate (up to 10/s) • internal power management saves extra LDO• High performance jammer rejection• AlwaysLocate TM Intelligent Algorithm (Advance Power Periodic Mode) for power saving

MT3333

UART

TCXOLNA + SAW

GNSS

RTC

VCC

UART

UART

Characteristics

Parameter Typ Unit




TTFF hotstart <1 s


Power consumption

GNSS active (aquisition) 35 mA

GNSS active (tracking) 29 mA


Accuracy





www.gns-gmbh.com

GPS/TimeGPS Module precision timing

www.gns-gmbh.com

9.3 x 10.0 x 2.3 mm

Introduction

The TC6000GTIM GPS timing module incorperates acomplete GPS receiver (RF, Baseband plus GPS processing) with superior performance of -162dBm navigation sensitivity. It supports high precision GPS time pulse functionality (PPS) even if only one single satellite is in view. The “time stamp” function provides an internal high precision time measurement that is triggered by a hardwareinput. After a pulse appears on this input, the UTC absolute time point of the pulse event becomes available as a numerical value on the data port. This function is useful to attach timestamps to events (e.g. physical measurements) with nano-second resolution.

Features • One satellite PPS pulse generation for synchronization purposes• “Time stamp” feature with nanosecond resolution• GPS tracking & navigation sensitivity -162dBm• Host computer driver and implementation support from GNS• Suitable for many Operation Systems• GPS SAW filter and TCXO included• Only one single power supply (1.8V) needed• Miniature 36 pin module 9.3x10.3x2.3 mm LGA• UART interface• Assisted GPS (A-GPS) support

Applications

• Precision Timing• Femtocells • Exploration equipment• Data loggers• Distributed data acquisition systems• Mobile communication equipment

TCXO

BPFGPS

RTC

1.8V

NL5500L

UART

GPS Module precision timing TC6000GTIM

GPSsubsystem

Characteristics

Parameter Typ Unit

Output data rate 1 1/s



TTFF hotstart <1 s

TTFF coldstart 34 s

Power consumption




Accuracy

Time stamp precision 45 ns typ.

PPS jitter 12 ns typ.


www.gns-gmbh.com

GPS/Time

time stamp

PPS

Made in Germany

GPS precision timing StarterKitTC6000GTIM StarterKit

Introduction

TC6000GTIM StarterKit and the TC6000GTIM test software have been developed to evaluate the module before design–in. The Starter Kit and Software can be easily run on a PC and the “time stamp” function can be tested by triggering events by pressing a key (or pulling an input pin) on the StarterKit PCB.

Features • USB connection • Power supply through USB• SMA antenna connector for GPS• DC supply on RF input for connecting active antennas• Miniature key button and pin header for time stamp event input

StarterKit contents

• GNS TC6000GTIM EVB• USB-A to mini USB cable• Active GPS antenna • CD with documentation & software

Accessory

GPS antenna evaluation Kit is a practical GPS antenna evaluation board to estimate GPS signal levels atthe application environments, where a chip antenna will be applied. Furthermore it implements a SPDT RF switch IC, which switches between the on-board chip antenna and a second active or passive GPS antenna.

Contents

• GPS antenna evaluation board• SMA adapter (male-male)

TC6000GTIM software

TC6000G Starter Kit

TC6000 Starter Kit

Antenna evaluation Kit

GPS/Time

TC6000 GTIM Starter Kit


NOTES

www.gns-gmbh.com

GPS/ GNSSGPS antenna module

www.gns-gmbh.com

GPS antenna moduleGNS 401

Introduction

GNS 401 is one of the smallest GPS antenna modulebased on the MT3329 single chip solutions,available with a finely tuned, high-sensitivity patch ceramic antenna.It has a very compact and easy to integrate designwith the ultimate tracking performance.

Features • MediaTek MT3329 chipset• Smart antenna: finely tuned ceramic antenna• High sensitivity, -165 dBm • Position accuracy, <3.0m • GPS fix indication output pin• Compact design 16.0x16.0x6.0 mm• SBAS (WAAS/EGNOS/MSAS/GAGAN) support• A-GPS and EPO (extended prediction orbit) support• 66 acquisition channels• Multi-path compensation • Improved jammer reduction • UART (TTL) and USB interface support• NMEA 0183 or binary protocol support• FCC, E911, RoHS compliance• SMD type with stamp holes

Characteristics

Parameter Typ Unit




TTFF hotstart < 1 s

TTFF coldstart < 35 s

Power consumption



Power Supply 3.3V - 5.5V

Acq/tracking channels 66/22

16.0 x 16.0 x 6.0 mm

GPS

backup current 10 uA

www.gns-gmbh.com


Introduction

The GNS 501 is an awesome little module for navigation, package tracking and any other applicationwhere simple, reliable positioning data is a necessity. To get it up and running, all you have to do is hook upa 1.8V power supply and a serial data line.

Features

• Improved acquisition performance• Improved tracking&navigation performance and minimized error in multi-path environments• Standard NMEA 0183 output• Precision 1PPS output • GPS Fix indication output pin• Push to Fix pin (PTF) for power management• Automatic Power Management (APM) feature• Compact design 17.0x18.0x7.8 mm• Single 1.8 VDC supply • UART interface• RoHS compliant• Fast time to market

Characteristics

Parameter Typ Unit

Output rate 1 1/s



TTFF hotstart <1 s

TTFF coldstart 34 s

Power consumption




Acq./tracking channels 40/16

17.0 x 18.0 x 7.8 mm

GPS

www.gns-gmbh.com


Made in Germany


Introduction

Based on the MT3339 single chip solution the GNS 601 provides an easy to build-in SMD solderable complete GPS receiver solution. It has got an excellent low power consumption and supports up to 66 acquisition and 22 tracking channels, providing navigation sensitivity up to -165dBm.

Features • Ultra high sensitivity: -165dBm• Extra-low power consumption • Extremely fast TTFF at low signal level• Embedded logger function• SBAS(WAAS,EGNOS,MSAS,GAGAN,QZSS) support• NMEA-0183 or binary protocol• SMD type with stamp holes• 66 acquisition- / 22 tracking channels• A-GPS and EASY™ (Self generated orbit prediction) support • Precision PPS output• High update rate (up to 10/s) • 12 Multi-tone Active Interference Canceller for GPS in-band jammer reduction• AlwaysLocate™ Intelligent Algorithm (Advance Power Periodic Mode for power saving)• Small form factor: 16x16x6.0 mm• CE, FCC and RoHS certified

Characteristics

Parameter Typ Unit

Output rate 1 1/s



TTFF hotstart <1 s

TTFF coldstart 31 s

Power consumption





GPS

16.0 x 16.0 x 6.0 mm

Backup current 7 uA

www.gns-gmbh.com


Introduction

Based on the MT3339 single chip solution the GNS 602 provides an easy to build-in SMD solderable complete GPS receiver solution. It has got an excellent low power consumption and supports up to 66 acquisition and 22 tracking channels, providing navigation sensitivity up to -165dBm. Integrated small GPS Chip Antenna.

Features • Ultra high sensitivity: -165dBm• Extra-low power consumption • Extremely fast TTFF at low signal level• Embedded logger function• SBAS(WAAS,EGNOS,MSAS,GAGAN,QZSS) support• NMEA-0183 or binary protocol• SMD type with stamp holes• 66 acquisition- / 22 tracking channels• A-GPS and EASY™ (Self generated orbit prediction) support • High accuracy PPS output• High update rate (up to 10/s) • 12 Multi-tone Active Interference Canceller for GPS in-band jammer reduction• AlwaysLocate™ Intelligent Algorithm (Advance Power Periodic Mode for power saving)• Small form factor: 16x16x2.1 mm• CE, FCC and RoHS certified

Characteristics

Parameter Typ Unit

Output rate 1 1/s



TTFF hotstart <1 s

TTFF coldstart 31 s

Power consumption





GPS

16.0 x 16.0 x 2.1 mm

Backup current 7 uA

www.gns-gmbh.com


IntroductionGNS603 is a small autonomous GPS receiver, based upon the MT3339 single chip, available with a finely tuned, high-sensitivity patch ceramic antenna.The navigation performance and accuracy is further improved by using correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS, QZSS) or DGPS(RTCM).

The GNS603 provides a extra embedded functionality for connection of an external active GPS antenna. An automatic antenna switching function and a short circuit protection features a software antenna status message called “Antenna Advisor”. The “Antenna Advisor” helps to indicate the different states, includingactive antenna connection, antenna open circuit detection and antenna shortage.

Features • External antenna input• 66 acquisition-/ 22 tracking channels• Ultra high sensitivity: -165dBm• Smart antenna: finely tuned ceramic patch antenna• Automatic external/internal antenna switching function• “Antenna Advisor” function• SBAS (WAAS,EGNOS,MSAS,GAGAN, QZSS) or DGPS (RTCM) correction support• A-GPS by EPO “Extended Prediction Orbit” ™ enables 7/14days prediction• 12 Multitone Active Interference Canceller (MTAIC) for GPS-in-band jammer rejection• EASY ™ : Self generated orbit prediction support• AlwaysLocate ™ : Intelligent power saving Algorithm• High accuracy 1PPS output• NMEA-0183 or binary protocol• High update rate (up to 10/s)• Embedded logger function with 16hrs internal memory• GPS current consumption (@3.3V): Acquisition: 25mA Typical Tracking: 20mA Typical• Low backup current consumption 7uA, typical• SMD type with stamp holes• Small form factor: 16x16x5.2mm• CE, FCC and RohS certified

Characteristics

Parameter Typ Unit

Output rate 1 1/s



TTFF hotstart 1 s

TTFF coldstart 35 s

Power consumption





GPS

16.0 x 16.0 x 5.2 mm

Backup current 7 uA

www.gns-gmbh.com


Introduction

GNS701 is a small autonomous GPS/GLONASS receiver,based upon the MediaTek MT3333 single chip, available with a finely tuned, high-sensitivity patch ceramic antenna. The receiver supports GPS and GLONASS simultaneously. The navigation performance and accuracy is further improved by using correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS), QZSS or DGPS(RTCM).

Features • GLONASS and GPS simultaneously• 99 acquisition-/ 33 tracking channels• Ultra high sensitivity: -165dBm• Smart antenna: finely tuned 18x18x4mm ceramic antenna• SBAS (WAAS,EGNOS,MSAS,GAGAN, QZSS) correction support• A-GPS by EPO “Extended Prediction Orbit” ™ enables 7/14days prediction• 12 Multitone Active Interference Canceller (MTAIC) for GPS-in-band jammer rejection• EASY ™ : Self generated orbit prediction support• AlwaysLocate ™ : Intelligent Algorithm for power saving• High accuracy 1PPS output• NMEA-0183 or binary protocol• High update rate (up to 10/s)• Embedded logger function with 16hrs internal memory• GPS current consumption (@3.3V): Acquisition: 35mA Typical Tracking: 29mA Typical• Low backup current consumption 15uA, typical• SMD type with stamp holes• Small form factor: 19.5x19.5x7.2 mm• CE, FCC and RohS certified

Characteristics

Parameter Typ Unit

Output rate up to 10 1/s



TTFF hotstart <1 s

TTFF coldstart 35 s

Power consumption





19,5 x 19,5 x 7,2 mm


www.gns-gmbh.com

GNSS

Characteristics

Parameter Typ Unit




TTFF hotstart <1 s

TTFF coldstart 35 s

Power consumption






GPS ReceiverGNS 702

www.gns-gmbh.com

16.0 x 16.0 x 2.1 mm

GPS + Glonass

Introduction

GNS702 is a small autonomous GPS/GLONASS/Beidoureceiver, based upon the MediaTek MT3333 single chip, available with a finely tuned, high-sensitivity chip ceramic antenna. The receiver supports GPS and GLONASS simultaneously. The navigation performance and accuracy is further improved by using correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS, QZSS).

Features • GLONASS and GPS simultaneously• BEIDOU in preparation• 99 acquisition-/ 33 tracking channels• Ultra high sensitivity: -165dBm• Chip ceramic antenna• SBAS (WAAS,EGNOS,MSAS,GAGAN, QZSS) correction support• A-GPS by EPO “Extended Prediction Orbit” ™

enables 7/14days prediction• 12 Multitone Active Interference Canceller (MTAIC) for GPS-in-band jammer rejection• EASY ™ : Self generated orbit prediction support• AlwaysLocate ™ : Intelligent Algorithm for power saving• High accuracy 1PPS output• NMEA-0183 or binary protocol• High update rate (up to 10/s)• Embedded logger function with 16hrs internal memory• GPS current consumption (@3.3V): Acquisition: 35mA Typical Tracking: 29mA Typical• Low backup current consumption 15uA, typical• SMD type with stamp holes• Small form factor: 16.0x16.0x2.1 mm• CE, FCC and RohS certified

Characteristics

Parameter Typ Unit




TTFF hotstart <1 s

TTFF coldstart 35 s

Power consumption






GNSS antenna moduleGNS 702

www.gns-gmbh.com

16.0 x 16.0 x 2.1 mm

GNSS

Introduction




Characteristics

Parameter Typ Unit




TTFF hotstart <1 s

TTFF coldstart 35 s

Power consumption






GPS ReceiverGNS 702

www.gns-gmbh.com

16.0 x 16.0 x 2.1 mm

GPS + Glonass

Introduction




Parameter Typ Unit

Output rate 1 or 5 1/s

Tracking sensitivity -165* dBm

Acquisition sensitivity -146* dBm

TTFF hotstart 1 s


Power consumption


Power consumption 95 mW

Acq./tracking channels 52

PPS jitter 25 ns RMS

GNSS antenna moduleGNS 802

10.0 x 16.0 x 2.1 mm

GNSS

Introduction

GNS802 is a complete GNSS receiver based on SiRF StarV that includes a well matched tiny chip antenna to provide the best performance on a 10x16 mm outline. Due to its capability to use GPS and GLONASS at the same time, GNS802 benefits from the higher availability of satellites in critical environments. The navigation performance and accuracy is further improved by using the correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS), QZSS.

Features • GLONASS and GPS simultaneously, • GALILEO, BEIDOU ready• 52 channels• Ultra high sensitivity: -165dBm• Chip ceramic antenna• Extremely fast TTFF at low signal level• SBAS (WAAS,EGNOS,MSAS,GAGAN, QZSS) correction support• A-GPS predicted / self predicted support

• Active Interference Canceller for GPS-in-band jammer rejection• Embedded logger function (external SPI flash needed)• High accuracy 1PPS output• NMEA-0183 or binary protocol• High update rate (up to 5/s)• Low Power operating modes• Direct battery operation from a single LiIon cell• User selectable host interface : UART / SPI / I2C• Direct interfacing in 1.8V and 3.3V systems• ibernate current consumption 50uA typical• SMD type LGA; a stamp hole adaptor is available for manual solder process• Small form factor: 10.0x16.0x2.1 mm

Interface Voltage 1.8 - 4.3 VDC

Accuracy 2.5 m


Characteristics

www.gns-gmbh.com

GPS evaluation moduleTC6000GN-EM1-S

IntroductionThe TC6000GN-EM1-S board is equipped with direct plug-in connectors for the MSP-EXP430F5438, MSP-EXP430F5529 board or Stellaris LM3S9B96 Cortex M3 EVB. An on board 32.768kHz oscillator for the GPS RTC and internal level shifters to adapt to the MSP-EXP430 and Stellaris boards’ signal levelsof 3.3V are also included. The external SMA GPS antenna connector provides 3.3V DC to supply an active GPS antenna for system- and performance tests.

Features • Tiny plug-in board that directly matches to the MSP-EXP430F5529, MSP- EXP430F5438 or Stellaris LM3S9B96 Cortex M3 EVB RF1 and RF2 connectors• External SMA antenna connector on board • GPS active antenna 3.3V DC supply• GPS-fix LED indicator• Test firmware (source provided) for demonstration & FW development• Test firmware outputs GPS status and Position solution on LC Display

StarterKit contents

• GNS TC6000GN-EM1-S plug-in board• Active GPS antenna• CD with documentation

Accessory


Contents


GPS antenna evaluation Kit

TC6000GN-EM1-S

TC6000GN-EM1-S + MSP430 F5529

TC6000GN-EM1-S + MSP430F5438


GN

S 1301

GPS StarterKits

Introduction

Our StarterKits are developed to support designers during evaluation anddesign-in of GNS-GmbH GPS stand alone solutions. Reference layouts are available on the GNS web page www.forum.gns-gmbh.com

Features • On board USB2UART bridge for PC connection• Power supply over USB • SMA connector for GPS antenna input• DC output (3.0V) to supply active antenna• LED „fix indicator“

StarterKit contents

• GNS GPS module• USB-A to mini USB cable• Active GPS antenna• CD with documentation & software

Accessory


Contents


We can provide starterkits for all our GPS modules.Do not hesitate to ask our distribution partner or contact us directly.

Starter Kit

GPS antenna evaluation Kit

Starter Kit


ww

w.gns-gm

bh.com

GP

S +

GLO

NA

SS

mo

du

les a

nd

an

ten

na m

od

ule

s

M

odel Chipset

Size (mm

) Sensitivity Power Interface

Features

Aquisition (dBm)

Tracking (dBm)

Aquisition (mW)

Tracking (mW)

NMEA output UART

TC6000GN

-P1CC4000

9.3x10.0x2.3-146

-162122

81

GN

S 1001M

T33399.0x12.7x2.1

6350

10.0x13.0x2.1150

122

8266

11696

GN

S 1101

GN

S 1201

GN

S 1301

MT3329

MT3339

MT3333

11.5x13.0x2.1

11.5x13.0x2.1

1.8 -3.3V

Aquisition channels

1 PPS (ns RMS)

USB

GLONASS

4066666699

••

•

10

100

1010•

-148-165

-148-165

-148-165

-148-165

Deep sleep

•

Watchful eye

•TC6000G

TIM

NL5500L

9.3x10.0x2.3-146

-162113

7240

•12

GPS

•••

• ••

SBAS

Time stamp

QZSS

•

1SV PPS feature

•

2552

GN

S 23019.3x10.0x2.1

••

-148-165

••

SiRFstarVSPI / I 2C

•

Others

6968

••

Galileo

Beidou

11696

GN

S 1301-B*M

T333311.5x13.0x2.1

99•

10-148

-165•

••

• •

•••••

••

GPS Patch antenna

GPS Chip antenna

GN

S 401

GN

S 601

GN

S 602

GN

S 603

GN

S 701

GN

S 702

GN

S 501

MT3329

150122

USB

66•

-----148

-165•

••

16.0x16.0x6.0•

MT3339

8366

•10

-148-165

••

•16.0x16.0x6.0

•M

T333983

6766

•10

-148-165

••

•16.0x16.0x6.0

•M

T333983

6766

•10

-148-165

••

•16.0x16.0x5.2

•116

96M

T333319,.5x19.5x7.2

99•

10-148

-165•

••

••

11696

MT3333

16.0x16.0x2.199

•10

-148-165

••

••

••

•

CC400017.0x18.0x7.8

-145-161

13090

PPS output

••••• •••••••••

1.8V

------

3.3V

3.3V

3.3V

3.3V

3.3V

3.3V

3.3V

3.3V

3.3V

3.3V

3.3V

DGPS/RTCM input

3.3V

3.3V

DOC: GPS Spreadsheet_11092013

• H

ost needed

1.8V

67

1.8 -3.3V25

52G

NS 802

9.3x10.0x2.1•

•-146

-165•

•SiRFstarV

SPI / I 2C•

6995

••

15 15

•

• •

••

••

----

www.gns-gmbh.com

Tailormade

GPS unique solutions tailored to

your needs !

Questions ?

send email to [email protected]

___

Contact us

EMEA GNS - GmbH +49 2405 4148 0 [email protected] Adenauerstr. 18 52146 Würselen Germany

ASIA GNS ASIA Ltd. +852 2537 2889 [email protected] Room 303, 3/F, St. George´s Building 2 Ice House Street, Central Hong Kong

www.gns-gmbh.com

GNS-GmbH reserves all rights to this document and the information contained herein. Products, names and logos described herein may in whole or in part be subject to intellectual property rights. The information contained herein is provided “as is”. No warranty of any kind is made in relation to the content of this document. This document may be revised by GNS-GmbH at any time. Copyright © 2013, GNS-GmbH, Adenauerstr. 18, 52146 Würselen, Germany

1109

2013

_GPS

Distribution

Japan KAGA Electronics Ltd.

Date post:	20-Mar-2016
Category:	Documents
Upload:	dci-ag
View:	226 times
Download:	6 times

GNS Newsletter 10/2013

Documents